diff options
Diffstat (limited to 'drivers/net/phy/at803x.c')
| -rw-r--r-- | drivers/net/phy/at803x.c | 2434 |
1 files changed, 0 insertions, 2434 deletions
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c deleted file mode 100644 index fdb89a505d..0000000000 --- a/drivers/net/phy/at803x.c +++ /dev/null @@ -1,2434 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * drivers/net/phy/at803x.c - * - * Driver for Qualcomm Atheros AR803x PHY - * - * Author: Matus Ujhelyi <ujhelyi.m@gmail.com> - */ - -#include <linux/phy.h> -#include <linux/module.h> -#include <linux/string.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/ethtool_netlink.h> -#include <linux/bitfield.h> -#include <linux/regulator/of_regulator.h> -#include <linux/regulator/driver.h> -#include <linux/regulator/consumer.h> -#include <linux/of.h> -#include <linux/phylink.h> -#include <linux/sfp.h> -#include <dt-bindings/net/qca-ar803x.h> - -#define AT803X_SPECIFIC_FUNCTION_CONTROL 0x10 -#define AT803X_SFC_ASSERT_CRS BIT(11) -#define AT803X_SFC_FORCE_LINK BIT(10) -#define AT803X_SFC_MDI_CROSSOVER_MODE_M GENMASK(6, 5) -#define AT803X_SFC_AUTOMATIC_CROSSOVER 0x3 -#define AT803X_SFC_MANUAL_MDIX 0x1 -#define AT803X_SFC_MANUAL_MDI 0x0 -#define AT803X_SFC_SQE_TEST BIT(2) -#define AT803X_SFC_POLARITY_REVERSAL BIT(1) -#define AT803X_SFC_DISABLE_JABBER BIT(0) - -#define AT803X_SPECIFIC_STATUS 0x11 -#define AT803X_SS_SPEED_MASK GENMASK(15, 14) -#define AT803X_SS_SPEED_1000 2 -#define AT803X_SS_SPEED_100 1 -#define AT803X_SS_SPEED_10 0 -#define AT803X_SS_DUPLEX BIT(13) -#define AT803X_SS_SPEED_DUPLEX_RESOLVED BIT(11) -#define AT803X_SS_MDIX BIT(6) - -#define QCA808X_SS_SPEED_MASK GENMASK(9, 7) -#define QCA808X_SS_SPEED_2500 4 - -#define AT803X_INTR_ENABLE 0x12 -#define AT803X_INTR_ENABLE_AUTONEG_ERR BIT(15) -#define AT803X_INTR_ENABLE_SPEED_CHANGED BIT(14) -#define AT803X_INTR_ENABLE_DUPLEX_CHANGED BIT(13) -#define AT803X_INTR_ENABLE_PAGE_RECEIVED BIT(12) -#define AT803X_INTR_ENABLE_LINK_FAIL BIT(11) -#define AT803X_INTR_ENABLE_LINK_SUCCESS BIT(10) -#define AT803X_INTR_ENABLE_LINK_FAIL_BX BIT(8) -#define AT803X_INTR_ENABLE_LINK_SUCCESS_BX BIT(7) -#define AT803X_INTR_ENABLE_WIRESPEED_DOWNGRADE BIT(5) -#define AT803X_INTR_ENABLE_POLARITY_CHANGED BIT(1) -#define AT803X_INTR_ENABLE_WOL BIT(0) - -#define AT803X_INTR_STATUS 0x13 - -#define AT803X_SMART_SPEED 0x14 -#define AT803X_SMART_SPEED_ENABLE BIT(5) -#define AT803X_SMART_SPEED_RETRY_LIMIT_MASK GENMASK(4, 2) -#define AT803X_SMART_SPEED_BYPASS_TIMER BIT(1) -#define AT803X_CDT 0x16 -#define AT803X_CDT_MDI_PAIR_MASK GENMASK(9, 8) -#define AT803X_CDT_ENABLE_TEST BIT(0) -#define AT803X_CDT_STATUS 0x1c -#define AT803X_CDT_STATUS_STAT_NORMAL 0 -#define AT803X_CDT_STATUS_STAT_SHORT 1 -#define AT803X_CDT_STATUS_STAT_OPEN 2 -#define AT803X_CDT_STATUS_STAT_FAIL 3 -#define AT803X_CDT_STATUS_STAT_MASK GENMASK(9, 8) -#define AT803X_CDT_STATUS_DELTA_TIME_MASK GENMASK(7, 0) -#define AT803X_LED_CONTROL 0x18 - -#define AT803X_PHY_MMD3_WOL_CTRL 0x8012 -#define AT803X_WOL_EN BIT(5) -#define AT803X_LOC_MAC_ADDR_0_15_OFFSET 0x804C -#define AT803X_LOC_MAC_ADDR_16_31_OFFSET 0x804B -#define AT803X_LOC_MAC_ADDR_32_47_OFFSET 0x804A -#define AT803X_REG_CHIP_CONFIG 0x1f -#define AT803X_BT_BX_REG_SEL 0x8000 - -#define AT803X_DEBUG_ADDR 0x1D -#define AT803X_DEBUG_DATA 0x1E - -#define AT803X_MODE_CFG_MASK 0x0F -#define AT803X_MODE_CFG_BASET_RGMII 0x00 -#define AT803X_MODE_CFG_BASET_SGMII 0x01 -#define AT803X_MODE_CFG_BX1000_RGMII_50OHM 0x02 -#define AT803X_MODE_CFG_BX1000_RGMII_75OHM 0x03 -#define AT803X_MODE_CFG_BX1000_CONV_50OHM 0x04 -#define AT803X_MODE_CFG_BX1000_CONV_75OHM 0x05 -#define AT803X_MODE_CFG_FX100_RGMII_50OHM 0x06 -#define AT803X_MODE_CFG_FX100_CONV_50OHM 0x07 -#define AT803X_MODE_CFG_RGMII_AUTO_MDET 0x0B -#define AT803X_MODE_CFG_FX100_RGMII_75OHM 0x0E -#define AT803X_MODE_CFG_FX100_CONV_75OHM 0x0F - -#define AT803X_PSSR 0x11 /*PHY-Specific Status Register*/ -#define AT803X_PSSR_MR_AN_COMPLETE 0x0200 - -#define AT803X_DEBUG_ANALOG_TEST_CTRL 0x00 -#define QCA8327_DEBUG_MANU_CTRL_EN BIT(2) -#define QCA8337_DEBUG_MANU_CTRL_EN GENMASK(3, 2) -#define AT803X_DEBUG_RX_CLK_DLY_EN BIT(15) - -#define AT803X_DEBUG_SYSTEM_CTRL_MODE 0x05 -#define AT803X_DEBUG_TX_CLK_DLY_EN BIT(8) - -#define AT803X_DEBUG_REG_HIB_CTRL 0x0b -#define AT803X_DEBUG_HIB_CTRL_SEL_RST_80U BIT(10) -#define AT803X_DEBUG_HIB_CTRL_EN_ANY_CHANGE BIT(13) -#define AT803X_DEBUG_HIB_CTRL_PS_HIB_EN BIT(15) - -#define AT803X_DEBUG_REG_3C 0x3C - -#define AT803X_DEBUG_REG_GREEN 0x3D -#define AT803X_DEBUG_GATE_CLK_IN1000 BIT(6) - -#define AT803X_DEBUG_REG_1F 0x1F -#define AT803X_DEBUG_PLL_ON BIT(2) -#define AT803X_DEBUG_RGMII_1V8 BIT(3) - -#define MDIO_AZ_DEBUG 0x800D - -/* AT803x supports either the XTAL input pad, an internal PLL or the - * DSP as clock reference for the clock output pad. The XTAL reference - * is only used for 25 MHz output, all other frequencies need the PLL. - * The DSP as a clock reference is used in synchronous ethernet - * applications. - * - * By default the PLL is only enabled if there is a link. Otherwise - * the PHY will go into low power state and disabled the PLL. You can - * set the PLL_ON bit (see debug register 0x1f) to keep the PLL always - * enabled. - */ -#define AT803X_MMD7_CLK25M 0x8016 -#define AT803X_CLK_OUT_MASK GENMASK(4, 2) -#define AT803X_CLK_OUT_25MHZ_XTAL 0 -#define AT803X_CLK_OUT_25MHZ_DSP 1 -#define AT803X_CLK_OUT_50MHZ_PLL 2 -#define AT803X_CLK_OUT_50MHZ_DSP 3 -#define AT803X_CLK_OUT_62_5MHZ_PLL 4 -#define AT803X_CLK_OUT_62_5MHZ_DSP 5 -#define AT803X_CLK_OUT_125MHZ_PLL 6 -#define AT803X_CLK_OUT_125MHZ_DSP 7 - -/* The AR8035 has another mask which is compatible with the AR8031/AR8033 mask - * but doesn't support choosing between XTAL/PLL and DSP. - */ -#define AT8035_CLK_OUT_MASK GENMASK(4, 3) - -#define AT803X_CLK_OUT_STRENGTH_MASK GENMASK(8, 7) -#define AT803X_CLK_OUT_STRENGTH_FULL 0 -#define AT803X_CLK_OUT_STRENGTH_HALF 1 -#define AT803X_CLK_OUT_STRENGTH_QUARTER 2 - -#define AT803X_DEFAULT_DOWNSHIFT 5 -#define AT803X_MIN_DOWNSHIFT 2 -#define AT803X_MAX_DOWNSHIFT 9 - -#define AT803X_MMD3_SMARTEEE_CTL1 0x805b -#define AT803X_MMD3_SMARTEEE_CTL2 0x805c -#define AT803X_MMD3_SMARTEEE_CTL3 0x805d -#define AT803X_MMD3_SMARTEEE_CTL3_LPI_EN BIT(8) - -#define ATH9331_PHY_ID 0x004dd041 -#define ATH8030_PHY_ID 0x004dd076 -#define ATH8031_PHY_ID 0x004dd074 -#define ATH8032_PHY_ID 0x004dd023 -#define ATH8035_PHY_ID 0x004dd072 -#define AT8030_PHY_ID_MASK 0xffffffef - -#define QCA8081_PHY_ID 0x004dd101 - -#define QCA8327_A_PHY_ID 0x004dd033 -#define QCA8327_B_PHY_ID 0x004dd034 -#define QCA8337_PHY_ID 0x004dd036 -#define QCA9561_PHY_ID 0x004dd042 -#define QCA8K_PHY_ID_MASK 0xffffffff - -#define QCA8K_DEVFLAGS_REVISION_MASK GENMASK(2, 0) - -#define AT803X_PAGE_FIBER 0 -#define AT803X_PAGE_COPPER 1 - -/* don't turn off internal PLL */ -#define AT803X_KEEP_PLL_ENABLED BIT(0) -#define AT803X_DISABLE_SMARTEEE BIT(1) - -/* disable hibernation mode */ -#define AT803X_DISABLE_HIBERNATION_MODE BIT(2) - -/* ADC threshold */ -#define QCA808X_PHY_DEBUG_ADC_THRESHOLD 0x2c80 -#define QCA808X_ADC_THRESHOLD_MASK GENMASK(7, 0) -#define QCA808X_ADC_THRESHOLD_80MV 0 -#define QCA808X_ADC_THRESHOLD_100MV 0xf0 -#define QCA808X_ADC_THRESHOLD_200MV 0x0f -#define QCA808X_ADC_THRESHOLD_300MV 0xff - -/* CLD control */ -#define QCA808X_PHY_MMD3_ADDR_CLD_CTRL7 0x8007 -#define QCA808X_8023AZ_AFE_CTRL_MASK GENMASK(8, 4) -#define QCA808X_8023AZ_AFE_EN 0x90 - -/* AZ control */ -#define QCA808X_PHY_MMD3_AZ_TRAINING_CTRL 0x8008 -#define QCA808X_MMD3_AZ_TRAINING_VAL 0x1c32 - -#define QCA808X_PHY_MMD1_MSE_THRESHOLD_20DB 0x8014 -#define QCA808X_MSE_THRESHOLD_20DB_VALUE 0x529 - -#define QCA808X_PHY_MMD1_MSE_THRESHOLD_17DB 0x800E -#define QCA808X_MSE_THRESHOLD_17DB_VALUE 0x341 - -#define QCA808X_PHY_MMD1_MSE_THRESHOLD_27DB 0x801E -#define QCA808X_MSE_THRESHOLD_27DB_VALUE 0x419 - -#define QCA808X_PHY_MMD1_MSE_THRESHOLD_28DB 0x8020 -#define QCA808X_MSE_THRESHOLD_28DB_VALUE 0x341 - -#define QCA808X_PHY_MMD7_TOP_OPTION1 0x901c -#define QCA808X_TOP_OPTION1_DATA 0x0 - -#define QCA808X_PHY_MMD3_DEBUG_1 0xa100 -#define QCA808X_MMD3_DEBUG_1_VALUE 0x9203 -#define QCA808X_PHY_MMD3_DEBUG_2 0xa101 -#define QCA808X_MMD3_DEBUG_2_VALUE 0x48ad -#define QCA808X_PHY_MMD3_DEBUG_3 0xa103 -#define QCA808X_MMD3_DEBUG_3_VALUE 0x1698 -#define QCA808X_PHY_MMD3_DEBUG_4 0xa105 -#define QCA808X_MMD3_DEBUG_4_VALUE 0x8001 -#define QCA808X_PHY_MMD3_DEBUG_5 0xa106 -#define QCA808X_MMD3_DEBUG_5_VALUE 0x1111 -#define QCA808X_PHY_MMD3_DEBUG_6 0xa011 -#define QCA808X_MMD3_DEBUG_6_VALUE 0x5f85 - -/* master/slave seed config */ -#define QCA808X_PHY_DEBUG_LOCAL_SEED 9 -#define QCA808X_MASTER_SLAVE_SEED_ENABLE BIT(1) -#define QCA808X_MASTER_SLAVE_SEED_CFG GENMASK(12, 2) -#define QCA808X_MASTER_SLAVE_SEED_RANGE 0x32 - -/* Hibernation yields lower power consumpiton in contrast with normal operation mode. - * when the copper cable is unplugged, the PHY enters into hibernation mode in about 10s. - */ -#define QCA808X_DBG_AN_TEST 0xb -#define QCA808X_HIBERNATION_EN BIT(15) - -#define QCA808X_CDT_ENABLE_TEST BIT(15) -#define QCA808X_CDT_INTER_CHECK_DIS BIT(13) -#define QCA808X_CDT_STATUS BIT(11) -#define QCA808X_CDT_LENGTH_UNIT BIT(10) - -#define QCA808X_MMD3_CDT_STATUS 0x8064 -#define QCA808X_MMD3_CDT_DIAG_PAIR_A 0x8065 -#define QCA808X_MMD3_CDT_DIAG_PAIR_B 0x8066 -#define QCA808X_MMD3_CDT_DIAG_PAIR_C 0x8067 -#define QCA808X_MMD3_CDT_DIAG_PAIR_D 0x8068 -#define QCA808X_CDT_DIAG_LENGTH_SAME_SHORT GENMASK(15, 8) -#define QCA808X_CDT_DIAG_LENGTH_CROSS_SHORT GENMASK(7, 0) - -#define QCA808X_CDT_CODE_PAIR_A GENMASK(15, 12) -#define QCA808X_CDT_CODE_PAIR_B GENMASK(11, 8) -#define QCA808X_CDT_CODE_PAIR_C GENMASK(7, 4) -#define QCA808X_CDT_CODE_PAIR_D GENMASK(3, 0) - -#define QCA808X_CDT_STATUS_STAT_TYPE GENMASK(1, 0) -#define QCA808X_CDT_STATUS_STAT_FAIL FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_TYPE, 0) -#define QCA808X_CDT_STATUS_STAT_NORMAL FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_TYPE, 1) -#define QCA808X_CDT_STATUS_STAT_SAME_OPEN FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_TYPE, 2) -#define QCA808X_CDT_STATUS_STAT_SAME_SHORT FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_TYPE, 3) - -#define QCA808X_CDT_STATUS_STAT_MDI GENMASK(3, 2) -#define QCA808X_CDT_STATUS_STAT_MDI1 FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_MDI, 1) -#define QCA808X_CDT_STATUS_STAT_MDI2 FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_MDI, 2) -#define QCA808X_CDT_STATUS_STAT_MDI3 FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_MDI, 3) - -/* NORMAL are MDI with type set to 0 */ -#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_NORMAL QCA808X_CDT_STATUS_STAT_MDI1 -#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_OPEN (QCA808X_CDT_STATUS_STAT_SAME_OPEN |\ - QCA808X_CDT_STATUS_STAT_MDI1) -#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_SHORT (QCA808X_CDT_STATUS_STAT_SAME_SHORT |\ - QCA808X_CDT_STATUS_STAT_MDI1) -#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_NORMAL QCA808X_CDT_STATUS_STAT_MDI2 -#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_OPEN (QCA808X_CDT_STATUS_STAT_SAME_OPEN |\ - QCA808X_CDT_STATUS_STAT_MDI2) -#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_SHORT (QCA808X_CDT_STATUS_STAT_SAME_SHORT |\ - QCA808X_CDT_STATUS_STAT_MDI2) -#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_NORMAL QCA808X_CDT_STATUS_STAT_MDI3 -#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_OPEN (QCA808X_CDT_STATUS_STAT_SAME_OPEN |\ - QCA808X_CDT_STATUS_STAT_MDI3) -#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_SHORT (QCA808X_CDT_STATUS_STAT_SAME_SHORT |\ - QCA808X_CDT_STATUS_STAT_MDI3) - -/* Added for reference of existence but should be handled by wait_for_completion already */ -#define QCA808X_CDT_STATUS_STAT_BUSY (BIT(1) | BIT(3)) - -/* QCA808X 1G chip type */ -#define QCA808X_PHY_MMD7_CHIP_TYPE 0x901d -#define QCA808X_PHY_CHIP_TYPE_1G BIT(0) - -#define QCA8081_PHY_SERDES_MMD1_FIFO_CTRL 0x9072 -#define QCA8081_PHY_FIFO_RSTN BIT(11) - -MODULE_DESCRIPTION("Qualcomm Atheros AR803x and QCA808X PHY driver"); -MODULE_AUTHOR("Matus Ujhelyi"); -MODULE_LICENSE("GPL"); - -enum stat_access_type { - PHY, - MMD -}; - -struct at803x_hw_stat { - const char *string; - u8 reg; - u32 mask; - enum stat_access_type access_type; -}; - -static struct at803x_hw_stat qca83xx_hw_stats[] = { - { "phy_idle_errors", 0xa, GENMASK(7, 0), PHY}, - { "phy_receive_errors", 0x15, GENMASK(15, 0), PHY}, - { "eee_wake_errors", 0x16, GENMASK(15, 0), MMD}, -}; - -struct at803x_ss_mask { - u16 speed_mask; - u8 speed_shift; -}; - -struct at803x_priv { - int flags; - u16 clk_25m_reg; - u16 clk_25m_mask; - u8 smarteee_lpi_tw_1g; - u8 smarteee_lpi_tw_100m; - bool is_fiber; - bool is_1000basex; - struct regulator_dev *vddio_rdev; - struct regulator_dev *vddh_rdev; - u64 stats[ARRAY_SIZE(qca83xx_hw_stats)]; -}; - -struct at803x_context { - u16 bmcr; - u16 advertise; - u16 control1000; - u16 int_enable; - u16 smart_speed; - u16 led_control; -}; - -static int at803x_debug_reg_write(struct phy_device *phydev, u16 reg, u16 data) -{ - int ret; - - ret = phy_write(phydev, AT803X_DEBUG_ADDR, reg); - if (ret < 0) - return ret; - - return phy_write(phydev, AT803X_DEBUG_DATA, data); -} - -static int at803x_debug_reg_read(struct phy_device *phydev, u16 reg) -{ - int ret; - - ret = phy_write(phydev, AT803X_DEBUG_ADDR, reg); - if (ret < 0) - return ret; - - return phy_read(phydev, AT803X_DEBUG_DATA); -} - -static int at803x_debug_reg_mask(struct phy_device *phydev, u16 reg, - u16 clear, u16 set) -{ - u16 val; - int ret; - - ret = at803x_debug_reg_read(phydev, reg); - if (ret < 0) - return ret; - - val = ret & 0xffff; - val &= ~clear; - val |= set; - - return phy_write(phydev, AT803X_DEBUG_DATA, val); -} - -static int at803x_write_page(struct phy_device *phydev, int page) -{ - int mask; - int set; - - if (page == AT803X_PAGE_COPPER) { - set = AT803X_BT_BX_REG_SEL; - mask = 0; - } else { - set = 0; - mask = AT803X_BT_BX_REG_SEL; - } - - return __phy_modify(phydev, AT803X_REG_CHIP_CONFIG, mask, set); -} - -static int at803x_read_page(struct phy_device *phydev) -{ - int ccr = __phy_read(phydev, AT803X_REG_CHIP_CONFIG); - - if (ccr < 0) - return ccr; - - if (ccr & AT803X_BT_BX_REG_SEL) - return AT803X_PAGE_COPPER; - - return AT803X_PAGE_FIBER; -} - -static int at803x_enable_rx_delay(struct phy_device *phydev) -{ - return at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL, 0, - AT803X_DEBUG_RX_CLK_DLY_EN); -} - -static int at803x_enable_tx_delay(struct phy_device *phydev) -{ - return at803x_debug_reg_mask(phydev, AT803X_DEBUG_SYSTEM_CTRL_MODE, 0, - AT803X_DEBUG_TX_CLK_DLY_EN); -} - -static int at803x_disable_rx_delay(struct phy_device *phydev) -{ - return at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL, - AT803X_DEBUG_RX_CLK_DLY_EN, 0); -} - -static int at803x_disable_tx_delay(struct phy_device *phydev) -{ - return at803x_debug_reg_mask(phydev, AT803X_DEBUG_SYSTEM_CTRL_MODE, - AT803X_DEBUG_TX_CLK_DLY_EN, 0); -} - -/* save relevant PHY registers to private copy */ -static void at803x_context_save(struct phy_device *phydev, - struct at803x_context *context) -{ - context->bmcr = phy_read(phydev, MII_BMCR); - context->advertise = phy_read(phydev, MII_ADVERTISE); - context->control1000 = phy_read(phydev, MII_CTRL1000); - context->int_enable = phy_read(phydev, AT803X_INTR_ENABLE); - context->smart_speed = phy_read(phydev, AT803X_SMART_SPEED); - context->led_control = phy_read(phydev, AT803X_LED_CONTROL); -} - -/* restore relevant PHY registers from private copy */ -static void at803x_context_restore(struct phy_device *phydev, - const struct at803x_context *context) -{ - phy_write(phydev, MII_BMCR, context->bmcr); - phy_write(phydev, MII_ADVERTISE, context->advertise); - phy_write(phydev, MII_CTRL1000, context->control1000); - phy_write(phydev, AT803X_INTR_ENABLE, context->int_enable); - phy_write(phydev, AT803X_SMART_SPEED, context->smart_speed); - phy_write(phydev, AT803X_LED_CONTROL, context->led_control); -} - -static int at803x_set_wol(struct phy_device *phydev, - struct ethtool_wolinfo *wol) -{ - int ret, irq_enabled; - - if (wol->wolopts & WAKE_MAGIC) { - struct net_device *ndev = phydev->attached_dev; - const u8 *mac; - unsigned int i; - static const unsigned int offsets[] = { - AT803X_LOC_MAC_ADDR_32_47_OFFSET, - AT803X_LOC_MAC_ADDR_16_31_OFFSET, - AT803X_LOC_MAC_ADDR_0_15_OFFSET, - }; - - if (!ndev) - return -ENODEV; - - mac = (const u8 *)ndev->dev_addr; - - if (!is_valid_ether_addr(mac)) - return -EINVAL; - - for (i = 0; i < 3; i++) - phy_write_mmd(phydev, MDIO_MMD_PCS, offsets[i], - mac[(i * 2) + 1] | (mac[(i * 2)] << 8)); - - /* Enable WOL interrupt */ - ret = phy_modify(phydev, AT803X_INTR_ENABLE, 0, AT803X_INTR_ENABLE_WOL); - if (ret) - return ret; - } else { - /* Disable WOL interrupt */ - ret = phy_modify(phydev, AT803X_INTR_ENABLE, AT803X_INTR_ENABLE_WOL, 0); - if (ret) - return ret; - } - - /* Clear WOL status */ - ret = phy_read(phydev, AT803X_INTR_STATUS); - if (ret < 0) - return ret; - - /* Check if there are other interrupts except for WOL triggered when PHY is - * in interrupt mode, only the interrupts enabled by AT803X_INTR_ENABLE can - * be passed up to the interrupt PIN. - */ - irq_enabled = phy_read(phydev, AT803X_INTR_ENABLE); - if (irq_enabled < 0) - return irq_enabled; - - irq_enabled &= ~AT803X_INTR_ENABLE_WOL; - if (ret & irq_enabled && !phy_polling_mode(phydev)) - phy_trigger_machine(phydev); - - return 0; -} - -static void at803x_get_wol(struct phy_device *phydev, - struct ethtool_wolinfo *wol) -{ - int value; - - wol->supported = WAKE_MAGIC; - wol->wolopts = 0; - - value = phy_read(phydev, AT803X_INTR_ENABLE); - if (value < 0) - return; - - if (value & AT803X_INTR_ENABLE_WOL) - wol->wolopts |= WAKE_MAGIC; -} - -static int qca83xx_get_sset_count(struct phy_device *phydev) -{ - return ARRAY_SIZE(qca83xx_hw_stats); -} - -static void qca83xx_get_strings(struct phy_device *phydev, u8 *data) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(qca83xx_hw_stats); i++) { - strscpy(data + i * ETH_GSTRING_LEN, - qca83xx_hw_stats[i].string, ETH_GSTRING_LEN); - } -} - -static u64 qca83xx_get_stat(struct phy_device *phydev, int i) -{ - struct at803x_hw_stat stat = qca83xx_hw_stats[i]; - struct at803x_priv *priv = phydev->priv; - int val; - u64 ret; - - if (stat.access_type == MMD) - val = phy_read_mmd(phydev, MDIO_MMD_PCS, stat.reg); - else - val = phy_read(phydev, stat.reg); - - if (val < 0) { - ret = U64_MAX; - } else { - val = val & stat.mask; - priv->stats[i] += val; - ret = priv->stats[i]; - } - - return ret; -} - -static void qca83xx_get_stats(struct phy_device *phydev, - struct ethtool_stats *stats, u64 *data) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(qca83xx_hw_stats); i++) - data[i] = qca83xx_get_stat(phydev, i); -} - -static int at803x_suspend(struct phy_device *phydev) -{ - int value; - int wol_enabled; - - value = phy_read(phydev, AT803X_INTR_ENABLE); - wol_enabled = value & AT803X_INTR_ENABLE_WOL; - - if (wol_enabled) - value = BMCR_ISOLATE; - else - value = BMCR_PDOWN; - - phy_modify(phydev, MII_BMCR, 0, value); - - return 0; -} - -static int at803x_resume(struct phy_device *phydev) -{ - return phy_modify(phydev, MII_BMCR, BMCR_PDOWN | BMCR_ISOLATE, 0); -} - -static int at803x_parse_dt(struct phy_device *phydev) -{ - struct device_node *node = phydev->mdio.dev.of_node; - struct at803x_priv *priv = phydev->priv; - u32 freq, strength, tw; - unsigned int sel; - int ret; - - if (!IS_ENABLED(CONFIG_OF_MDIO)) - return 0; - - if (of_property_read_bool(node, "qca,disable-smarteee")) - priv->flags |= AT803X_DISABLE_SMARTEEE; - - if (of_property_read_bool(node, "qca,disable-hibernation-mode")) - priv->flags |= AT803X_DISABLE_HIBERNATION_MODE; - - if (!of_property_read_u32(node, "qca,smarteee-tw-us-1g", &tw)) { - if (!tw || tw > 255) { - phydev_err(phydev, "invalid qca,smarteee-tw-us-1g\n"); - return -EINVAL; - } - priv->smarteee_lpi_tw_1g = tw; - } - - if (!of_property_read_u32(node, "qca,smarteee-tw-us-100m", &tw)) { - if (!tw || tw > 255) { - phydev_err(phydev, "invalid qca,smarteee-tw-us-100m\n"); - return -EINVAL; - } - priv->smarteee_lpi_tw_100m = tw; - } - - ret = of_property_read_u32(node, "qca,clk-out-frequency", &freq); - if (!ret) { - switch (freq) { - case 25000000: - sel = AT803X_CLK_OUT_25MHZ_XTAL; - break; - case 50000000: - sel = AT803X_CLK_OUT_50MHZ_PLL; - break; - case 62500000: - sel = AT803X_CLK_OUT_62_5MHZ_PLL; - break; - case 125000000: - sel = AT803X_CLK_OUT_125MHZ_PLL; - break; - default: - phydev_err(phydev, "invalid qca,clk-out-frequency\n"); - return -EINVAL; - } - - priv->clk_25m_reg |= FIELD_PREP(AT803X_CLK_OUT_MASK, sel); - priv->clk_25m_mask |= AT803X_CLK_OUT_MASK; - } - - ret = of_property_read_u32(node, "qca,clk-out-strength", &strength); - if (!ret) { - priv->clk_25m_mask |= AT803X_CLK_OUT_STRENGTH_MASK; - switch (strength) { - case AR803X_STRENGTH_FULL: - priv->clk_25m_reg |= AT803X_CLK_OUT_STRENGTH_FULL; - break; - case AR803X_STRENGTH_HALF: - priv->clk_25m_reg |= AT803X_CLK_OUT_STRENGTH_HALF; - break; - case AR803X_STRENGTH_QUARTER: - priv->clk_25m_reg |= AT803X_CLK_OUT_STRENGTH_QUARTER; - break; - default: - phydev_err(phydev, "invalid qca,clk-out-strength\n"); - return -EINVAL; - } - } - - return 0; -} - -static int at803x_probe(struct phy_device *phydev) -{ - struct device *dev = &phydev->mdio.dev; - struct at803x_priv *priv; - int ret; - - priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); - if (!priv) - return -ENOMEM; - - phydev->priv = priv; - - ret = at803x_parse_dt(phydev); - if (ret) - return ret; - - return 0; -} - -static int at803x_get_features(struct phy_device *phydev) -{ - struct at803x_priv *priv = phydev->priv; - int err; - - err = genphy_read_abilities(phydev); - if (err) - return err; - - if (phydev->drv->phy_id != ATH8031_PHY_ID) - return 0; - - /* AR8031/AR8033 have different status registers - * for copper and fiber operation. However, the - * extended status register is the same for both - * operation modes. - * - * As a result of that, ESTATUS_1000_XFULL is set - * to 1 even when operating in copper TP mode. - * - * Remove this mode from the supported link modes - * when not operating in 1000BaseX mode. - */ - if (!priv->is_1000basex) - linkmode_clear_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT, - phydev->supported); - - return 0; -} - -static int at803x_smarteee_config(struct phy_device *phydev) -{ - struct at803x_priv *priv = phydev->priv; - u16 mask = 0, val = 0; - int ret; - - if (priv->flags & AT803X_DISABLE_SMARTEEE) - return phy_modify_mmd(phydev, MDIO_MMD_PCS, - AT803X_MMD3_SMARTEEE_CTL3, - AT803X_MMD3_SMARTEEE_CTL3_LPI_EN, 0); - - if (priv->smarteee_lpi_tw_1g) { - mask |= 0xff00; - val |= priv->smarteee_lpi_tw_1g << 8; - } - if (priv->smarteee_lpi_tw_100m) { - mask |= 0x00ff; - val |= priv->smarteee_lpi_tw_100m; - } - if (!mask) - return 0; - - ret = phy_modify_mmd(phydev, MDIO_MMD_PCS, AT803X_MMD3_SMARTEEE_CTL1, - mask, val); - if (ret) - return ret; - - return phy_modify_mmd(phydev, MDIO_MMD_PCS, AT803X_MMD3_SMARTEEE_CTL3, - AT803X_MMD3_SMARTEEE_CTL3_LPI_EN, - AT803X_MMD3_SMARTEEE_CTL3_LPI_EN); -} - -static int at803x_clk_out_config(struct phy_device *phydev) -{ - struct at803x_priv *priv = phydev->priv; - - if (!priv->clk_25m_mask) - return 0; - - return phy_modify_mmd(phydev, MDIO_MMD_AN, AT803X_MMD7_CLK25M, - priv->clk_25m_mask, priv->clk_25m_reg); -} - -static int at8031_pll_config(struct phy_device *phydev) -{ - struct at803x_priv *priv = phydev->priv; - - /* The default after hardware reset is PLL OFF. After a soft reset, the - * values are retained. - */ - if (priv->flags & AT803X_KEEP_PLL_ENABLED) - return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_1F, - 0, AT803X_DEBUG_PLL_ON); - else - return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_1F, - AT803X_DEBUG_PLL_ON, 0); -} - -static int at803x_hibernation_mode_config(struct phy_device *phydev) -{ - struct at803x_priv *priv = phydev->priv; - - /* The default after hardware reset is hibernation mode enabled. After - * software reset, the value is retained. - */ - if (!(priv->flags & AT803X_DISABLE_HIBERNATION_MODE)) - return 0; - - return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_HIB_CTRL, - AT803X_DEBUG_HIB_CTRL_PS_HIB_EN, 0); -} - -static int at803x_config_init(struct phy_device *phydev) -{ - int ret; - - /* The RX and TX delay default is: - * after HW reset: RX delay enabled and TX delay disabled - * after SW reset: RX delay enabled, while TX delay retains the - * value before reset. - */ - if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID || - phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) - ret = at803x_enable_rx_delay(phydev); - else - ret = at803x_disable_rx_delay(phydev); - if (ret < 0) - return ret; - - if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID || - phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) - ret = at803x_enable_tx_delay(phydev); - else - ret = at803x_disable_tx_delay(phydev); - if (ret < 0) - return ret; - - ret = at803x_smarteee_config(phydev); - if (ret < 0) - return ret; - - ret = at803x_clk_out_config(phydev); - if (ret < 0) - return ret; - - ret = at803x_hibernation_mode_config(phydev); - if (ret < 0) - return ret; - - /* Ar803x extended next page bit is enabled by default. Cisco - * multigig switches read this bit and attempt to negotiate 10Gbps - * rates even if the next page bit is disabled. This is incorrect - * behaviour but we still need to accommodate it. XNP is only needed - * for 10Gbps support, so disable XNP. - */ - return phy_modify(phydev, MII_ADVERTISE, MDIO_AN_CTRL1_XNP, 0); -} - -static int at803x_ack_interrupt(struct phy_device *phydev) -{ - int err; - - err = phy_read(phydev, AT803X_INTR_STATUS); - - return (err < 0) ? err : 0; -} - -static int at803x_config_intr(struct phy_device *phydev) -{ - int err; - int value; - - value = phy_read(phydev, AT803X_INTR_ENABLE); - - if (phydev->interrupts == PHY_INTERRUPT_ENABLED) { - /* Clear any pending interrupts */ - err = at803x_ack_interrupt(phydev); - if (err) - return err; - - value |= AT803X_INTR_ENABLE_AUTONEG_ERR; - value |= AT803X_INTR_ENABLE_SPEED_CHANGED; - value |= AT803X_INTR_ENABLE_DUPLEX_CHANGED; - value |= AT803X_INTR_ENABLE_LINK_FAIL; - value |= AT803X_INTR_ENABLE_LINK_SUCCESS; - - err = phy_write(phydev, AT803X_INTR_ENABLE, value); - } else { - err = phy_write(phydev, AT803X_INTR_ENABLE, 0); - if (err) - return err; - - /* Clear any pending interrupts */ - err = at803x_ack_interrupt(phydev); - } - - return err; -} - -static irqreturn_t at803x_handle_interrupt(struct phy_device *phydev) -{ - int irq_status, int_enabled; - - irq_status = phy_read(phydev, AT803X_INTR_STATUS); - if (irq_status < 0) { - phy_error(phydev); - return IRQ_NONE; - } - - /* Read the current enabled interrupts */ - int_enabled = phy_read(phydev, AT803X_INTR_ENABLE); - if (int_enabled < 0) { - phy_error(phydev); - return IRQ_NONE; - } - - /* See if this was one of our enabled interrupts */ - if (!(irq_status & int_enabled)) - return IRQ_NONE; - - phy_trigger_machine(phydev); - - return IRQ_HANDLED; -} - -static void at803x_link_change_notify(struct phy_device *phydev) -{ - /* - * Conduct a hardware reset for AT8030 every time a link loss is - * signalled. This is necessary to circumvent a hardware bug that - * occurs when the cable is unplugged while TX packets are pending - * in the FIFO. In such cases, the FIFO enters an error mode it - * cannot recover from by software. - */ - if (phydev->state == PHY_NOLINK && phydev->mdio.reset_gpio) { - struct at803x_context context; - - at803x_context_save(phydev, &context); - - phy_device_reset(phydev, 1); - usleep_range(1000, 2000); - phy_device_reset(phydev, 0); - usleep_range(1000, 2000); - - at803x_context_restore(phydev, &context); - - phydev_dbg(phydev, "%s(): phy was reset\n", __func__); - } -} - -static int at803x_read_specific_status(struct phy_device *phydev, - struct at803x_ss_mask ss_mask) -{ - int ss; - - /* Read the AT8035 PHY-Specific Status register, which indicates the - * speed and duplex that the PHY is actually using, irrespective of - * whether we are in autoneg mode or not. - */ - ss = phy_read(phydev, AT803X_SPECIFIC_STATUS); - if (ss < 0) - return ss; - - if (ss & AT803X_SS_SPEED_DUPLEX_RESOLVED) { - int sfc, speed; - - sfc = phy_read(phydev, AT803X_SPECIFIC_FUNCTION_CONTROL); - if (sfc < 0) - return sfc; - - speed = ss & ss_mask.speed_mask; - speed >>= ss_mask.speed_shift; - - switch (speed) { - case AT803X_SS_SPEED_10: - phydev->speed = SPEED_10; - break; - case AT803X_SS_SPEED_100: - phydev->speed = SPEED_100; - break; - case AT803X_SS_SPEED_1000: - phydev->speed = SPEED_1000; - break; - case QCA808X_SS_SPEED_2500: - phydev->speed = SPEED_2500; - break; - } - if (ss & AT803X_SS_DUPLEX) - phydev->duplex = DUPLEX_FULL; - else - phydev->duplex = DUPLEX_HALF; - - if (ss & AT803X_SS_MDIX) - phydev->mdix = ETH_TP_MDI_X; - else - phydev->mdix = ETH_TP_MDI; - - switch (FIELD_GET(AT803X_SFC_MDI_CROSSOVER_MODE_M, sfc)) { - case AT803X_SFC_MANUAL_MDI: - phydev->mdix_ctrl = ETH_TP_MDI; - break; - case AT803X_SFC_MANUAL_MDIX: - phydev->mdix_ctrl = ETH_TP_MDI_X; - break; - case AT803X_SFC_AUTOMATIC_CROSSOVER: - phydev->mdix_ctrl = ETH_TP_MDI_AUTO; - break; - } - } - - return 0; -} - -static int at803x_read_status(struct phy_device *phydev) -{ - struct at803x_ss_mask ss_mask = { 0 }; - int err, old_link = phydev->link; - - /* Update the link, but return if there was an error */ - err = genphy_update_link(phydev); - if (err) - return err; - - /* why bother the PHY if nothing can have changed */ - if (phydev->autoneg == AUTONEG_ENABLE && old_link && phydev->link) - return 0; - - phydev->speed = SPEED_UNKNOWN; - phydev->duplex = DUPLEX_UNKNOWN; - phydev->pause = 0; - phydev->asym_pause = 0; - - err = genphy_read_lpa(phydev); - if (err < 0) - return err; - - ss_mask.speed_mask = AT803X_SS_SPEED_MASK; - ss_mask.speed_shift = __bf_shf(AT803X_SS_SPEED_MASK); - err = at803x_read_specific_status(phydev, ss_mask); - if (err < 0) - return err; - - if (phydev->autoneg == AUTONEG_ENABLE && phydev->autoneg_complete) - phy_resolve_aneg_pause(phydev); - - return 0; -} - -static int at803x_config_mdix(struct phy_device *phydev, u8 ctrl) -{ - u16 val; - - switch (ctrl) { - case ETH_TP_MDI: - val = AT803X_SFC_MANUAL_MDI; - break; - case ETH_TP_MDI_X: - val = AT803X_SFC_MANUAL_MDIX; - break; - case ETH_TP_MDI_AUTO: - val = AT803X_SFC_AUTOMATIC_CROSSOVER; - break; - default: - return 0; - } - - return phy_modify_changed(phydev, AT803X_SPECIFIC_FUNCTION_CONTROL, - AT803X_SFC_MDI_CROSSOVER_MODE_M, - FIELD_PREP(AT803X_SFC_MDI_CROSSOVER_MODE_M, val)); -} - -static int at803x_prepare_config_aneg(struct phy_device *phydev) -{ - int ret; - - ret = at803x_config_mdix(phydev, phydev->mdix_ctrl); - if (ret < 0) - return ret; - - /* Changes of the midx bits are disruptive to the normal operation; - * therefore any changes to these registers must be followed by a - * software reset to take effect. - */ - if (ret == 1) { - ret = genphy_soft_reset(phydev); - if (ret < 0) - return ret; - } - - return 0; -} - -static int at803x_config_aneg(struct phy_device *phydev) -{ - struct at803x_priv *priv = phydev->priv; - int ret; - - ret = at803x_prepare_config_aneg(phydev); - if (ret) - return ret; - - if (priv->is_1000basex) - return genphy_c37_config_aneg(phydev); - - return genphy_config_aneg(phydev); -} - -static int at803x_get_downshift(struct phy_device *phydev, u8 *d) -{ - int val; - - val = phy_read(phydev, AT803X_SMART_SPEED); - if (val < 0) - return val; - - if (val & AT803X_SMART_SPEED_ENABLE) - *d = FIELD_GET(AT803X_SMART_SPEED_RETRY_LIMIT_MASK, val) + 2; - else - *d = DOWNSHIFT_DEV_DISABLE; - - return 0; -} - -static int at803x_set_downshift(struct phy_device *phydev, u8 cnt) -{ - u16 mask, set; - int ret; - - switch (cnt) { - case DOWNSHIFT_DEV_DEFAULT_COUNT: - cnt = AT803X_DEFAULT_DOWNSHIFT; - fallthrough; - case AT803X_MIN_DOWNSHIFT ... AT803X_MAX_DOWNSHIFT: - set = AT803X_SMART_SPEED_ENABLE | - AT803X_SMART_SPEED_BYPASS_TIMER | - FIELD_PREP(AT803X_SMART_SPEED_RETRY_LIMIT_MASK, cnt - 2); - mask = AT803X_SMART_SPEED_RETRY_LIMIT_MASK; - break; - case DOWNSHIFT_DEV_DISABLE: - set = 0; - mask = AT803X_SMART_SPEED_ENABLE | - AT803X_SMART_SPEED_BYPASS_TIMER; - break; - default: - return -EINVAL; - } - - ret = phy_modify_changed(phydev, AT803X_SMART_SPEED, mask, set); - - /* After changing the smart speed settings, we need to perform a - * software reset, use phy_init_hw() to make sure we set the - * reapply any values which might got lost during software reset. - */ - if (ret == 1) - ret = phy_init_hw(phydev); - - return ret; -} - -static int at803x_get_tunable(struct phy_device *phydev, - struct ethtool_tunable *tuna, void *data) -{ - switch (tuna->id) { - case ETHTOOL_PHY_DOWNSHIFT: - return at803x_get_downshift(phydev, data); - default: - return -EOPNOTSUPP; - } -} - -static int at803x_set_tunable(struct phy_device *phydev, - struct ethtool_tunable *tuna, const void *data) -{ - switch (tuna->id) { - case ETHTOOL_PHY_DOWNSHIFT: - return at803x_set_downshift(phydev, *(const u8 *)data); - default: - return -EOPNOTSUPP; - } -} - -static int at803x_cable_test_result_trans(u16 status) -{ - switch (FIELD_GET(AT803X_CDT_STATUS_STAT_MASK, status)) { - case AT803X_CDT_STATUS_STAT_NORMAL: - return ETHTOOL_A_CABLE_RESULT_CODE_OK; - case AT803X_CDT_STATUS_STAT_SHORT: - return ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT; - case AT803X_CDT_STATUS_STAT_OPEN: - return ETHTOOL_A_CABLE_RESULT_CODE_OPEN; - case AT803X_CDT_STATUS_STAT_FAIL: - default: - return ETHTOOL_A_CABLE_RESULT_CODE_UNSPEC; - } -} - -static bool at803x_cdt_test_failed(u16 status) -{ - return FIELD_GET(AT803X_CDT_STATUS_STAT_MASK, status) == - AT803X_CDT_STATUS_STAT_FAIL; -} - -static bool at803x_cdt_fault_length_valid(u16 status) -{ - switch (FIELD_GET(AT803X_CDT_STATUS_STAT_MASK, status)) { - case AT803X_CDT_STATUS_STAT_OPEN: - case AT803X_CDT_STATUS_STAT_SHORT: - return true; - } - return false; -} - -static int at803x_cdt_fault_length(int dt) -{ - /* According to the datasheet the distance to the fault is - * DELTA_TIME * 0.824 meters. - * - * The author suspect the correct formula is: - * - * fault_distance = DELTA_TIME * (c * VF) / 125MHz / 2 - * - * where c is the speed of light, VF is the velocity factor of - * the twisted pair cable, 125MHz the counter frequency and - * we need to divide by 2 because the hardware will measure the - * round trip time to the fault and back to the PHY. - * - * With a VF of 0.69 we get the factor 0.824 mentioned in the - * datasheet. - */ - return (dt * 824) / 10; -} - -static int at803x_cdt_start(struct phy_device *phydev, - u32 cdt_start) -{ - return phy_write(phydev, AT803X_CDT, cdt_start); -} - -static int at803x_cdt_wait_for_completion(struct phy_device *phydev, - u32 cdt_en) -{ - int val, ret; - - /* One test run takes about 25ms */ - ret = phy_read_poll_timeout(phydev, AT803X_CDT, val, - !(val & cdt_en), - 30000, 100000, true); - - return ret < 0 ? ret : 0; -} - -static int at803x_cable_test_one_pair(struct phy_device *phydev, int pair) -{ - static const int ethtool_pair[] = { - ETHTOOL_A_CABLE_PAIR_A, - ETHTOOL_A_CABLE_PAIR_B, - ETHTOOL_A_CABLE_PAIR_C, - ETHTOOL_A_CABLE_PAIR_D, - }; - int ret, val; - - val = FIELD_PREP(AT803X_CDT_MDI_PAIR_MASK, pair) | - AT803X_CDT_ENABLE_TEST; - ret = at803x_cdt_start(phydev, val); - if (ret) - return ret; - - ret = at803x_cdt_wait_for_completion(phydev, AT803X_CDT_ENABLE_TEST); - if (ret) - return ret; - - val = phy_read(phydev, AT803X_CDT_STATUS); - if (val < 0) - return val; - - if (at803x_cdt_test_failed(val)) - return 0; - - ethnl_cable_test_result(phydev, ethtool_pair[pair], - at803x_cable_test_result_trans(val)); - - if (at803x_cdt_fault_length_valid(val)) { - val = FIELD_GET(AT803X_CDT_STATUS_DELTA_TIME_MASK, val); - ethnl_cable_test_fault_length(phydev, ethtool_pair[pair], - at803x_cdt_fault_length(val)); - } - - return 1; -} - -static int at803x_cable_test_get_status(struct phy_device *phydev, - bool *finished, unsigned long pair_mask) -{ - int retries = 20; - int pair, ret; - - *finished = false; - - /* According to the datasheet the CDT can be performed when - * there is no link partner or when the link partner is - * auto-negotiating. Starting the test will restart the AN - * automatically. It seems that doing this repeatedly we will - * get a slot where our link partner won't disturb our - * measurement. - */ - while (pair_mask && retries--) { - for_each_set_bit(pair, &pair_mask, 4) { - ret = at803x_cable_test_one_pair(phydev, pair); - if (ret < 0) - return ret; - if (ret) - clear_bit(pair, &pair_mask); - } - if (pair_mask) - msleep(250); - } - - *finished = true; - - return 0; -} - -static void at803x_cable_test_autoneg(struct phy_device *phydev) -{ - /* Enable auto-negotiation, but advertise no capabilities, no link - * will be established. A restart of the auto-negotiation is not - * required, because the cable test will automatically break the link. - */ - phy_write(phydev, MII_BMCR, BMCR_ANENABLE); - phy_write(phydev, MII_ADVERTISE, ADVERTISE_CSMA); -} - -static int at803x_cable_test_start(struct phy_device *phydev) -{ - at803x_cable_test_autoneg(phydev); - /* we do all the (time consuming) work later */ - return 0; -} - -static int at8031_rgmii_reg_set_voltage_sel(struct regulator_dev *rdev, - unsigned int selector) -{ - struct phy_device *phydev = rdev_get_drvdata(rdev); - - if (selector) - return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_1F, - 0, AT803X_DEBUG_RGMII_1V8); - else - return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_1F, - AT803X_DEBUG_RGMII_1V8, 0); -} - -static int at8031_rgmii_reg_get_voltage_sel(struct regulator_dev *rdev) -{ - struct phy_device *phydev = rdev_get_drvdata(rdev); - int val; - - val = at803x_debug_reg_read(phydev, AT803X_DEBUG_REG_1F); - if (val < 0) - return val; - - return (val & AT803X_DEBUG_RGMII_1V8) ? 1 : 0; -} - -static const struct regulator_ops vddio_regulator_ops = { - .list_voltage = regulator_list_voltage_table, - .set_voltage_sel = at8031_rgmii_reg_set_voltage_sel, - .get_voltage_sel = at8031_rgmii_reg_get_voltage_sel, -}; - -static const unsigned int vddio_voltage_table[] = { - 1500000, - 1800000, -}; - -static const struct regulator_desc vddio_desc = { - .name = "vddio", - .of_match = of_match_ptr("vddio-regulator"), - .n_voltages = ARRAY_SIZE(vddio_voltage_table), - .volt_table = vddio_voltage_table, - .ops = &vddio_regulator_ops, - .type = REGULATOR_VOLTAGE, - .owner = THIS_MODULE, -}; - -static const struct regulator_ops vddh_regulator_ops = { -}; - -static const struct regulator_desc vddh_desc = { - .name = "vddh", - .of_match = of_match_ptr("vddh-regulator"), - .n_voltages = 1, - .fixed_uV = 2500000, - .ops = &vddh_regulator_ops, - .type = REGULATOR_VOLTAGE, - .owner = THIS_MODULE, -}; - -static int at8031_register_regulators(struct phy_device *phydev) -{ - struct at803x_priv *priv = phydev->priv; - struct device *dev = &phydev->mdio.dev; - struct regulator_config config = { }; - - config.dev = dev; - config.driver_data = phydev; - - priv->vddio_rdev = devm_regulator_register(dev, &vddio_desc, &config); - if (IS_ERR(priv->vddio_rdev)) { - phydev_err(phydev, "failed to register VDDIO regulator\n"); - return PTR_ERR(priv->vddio_rdev); - } - - priv->vddh_rdev = devm_regulator_register(dev, &vddh_desc, &config); - if (IS_ERR(priv->vddh_rdev)) { - phydev_err(phydev, "failed to register VDDH regulator\n"); - return PTR_ERR(priv->vddh_rdev); - } - - return 0; -} - -static int at8031_sfp_insert(void *upstream, const struct sfp_eeprom_id *id) -{ - struct phy_device *phydev = upstream; - __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_support); - __ETHTOOL_DECLARE_LINK_MODE_MASK(sfp_support); - DECLARE_PHY_INTERFACE_MASK(interfaces); - phy_interface_t iface; - - linkmode_zero(phy_support); - phylink_set(phy_support, 1000baseX_Full); - phylink_set(phy_support, 1000baseT_Full); - phylink_set(phy_support, Autoneg); - phylink_set(phy_support, Pause); - phylink_set(phy_support, Asym_Pause); - - linkmode_zero(sfp_support); - sfp_parse_support(phydev->sfp_bus, id, sfp_support, interfaces); - /* Some modules support 10G modes as well as others we support. - * Mask out non-supported modes so the correct interface is picked. - */ - linkmode_and(sfp_support, phy_support, sfp_support); - - if (linkmode_empty(sfp_support)) { - dev_err(&phydev->mdio.dev, "incompatible SFP module inserted\n"); - return -EINVAL; - } - - iface = sfp_select_interface(phydev->sfp_bus, sfp_support); - - /* Only 1000Base-X is supported by AR8031/8033 as the downstream SerDes - * interface for use with SFP modules. - * However, some copper modules detected as having a preferred SGMII - * interface do default to and function in 1000Base-X mode, so just - * print a warning and allow such modules, as they may have some chance - * of working. - */ - if (iface == PHY_INTERFACE_MODE_SGMII) - dev_warn(&phydev->mdio.dev, "module may not function if 1000Base-X not supported\n"); - else if (iface != PHY_INTERFACE_MODE_1000BASEX) - return -EINVAL; - - return 0; -} - -static const struct sfp_upstream_ops at8031_sfp_ops = { - .attach = phy_sfp_attach, - .detach = phy_sfp_detach, - .module_insert = at8031_sfp_insert, -}; - -static int at8031_parse_dt(struct phy_device *phydev) -{ - struct device_node *node = phydev->mdio.dev.of_node; - struct at803x_priv *priv = phydev->priv; - int ret; - - if (of_property_read_bool(node, "qca,keep-pll-enabled")) - priv->flags |= AT803X_KEEP_PLL_ENABLED; - - ret = at8031_register_regulators(phydev); - if (ret < 0) - return ret; - - ret = devm_regulator_get_enable_optional(&phydev->mdio.dev, - "vddio"); - if (ret) { - phydev_err(phydev, "failed to get VDDIO regulator\n"); - return ret; - } - - /* Only AR8031/8033 support 1000Base-X for SFP modules */ - return phy_sfp_probe(phydev, &at8031_sfp_ops); -} - -static int at8031_probe(struct phy_device *phydev) -{ - struct at803x_priv *priv; - int mode_cfg; - int ccr; - int ret; - - ret = at803x_probe(phydev); - if (ret) - return ret; - - priv = phydev->priv; - - /* Only supported on AR8031/AR8033, the AR8030/AR8035 use strapping - * options. - */ - ret = at8031_parse_dt(phydev); - if (ret) - return ret; - - ccr = phy_read(phydev, AT803X_REG_CHIP_CONFIG); - if (ccr < 0) - return ccr; - mode_cfg = ccr & AT803X_MODE_CFG_MASK; - - switch (mode_cfg) { - case AT803X_MODE_CFG_BX1000_RGMII_50OHM: - case AT803X_MODE_CFG_BX1000_RGMII_75OHM: - priv->is_1000basex = true; - fallthrough; - case AT803X_MODE_CFG_FX100_RGMII_50OHM: - case AT803X_MODE_CFG_FX100_RGMII_75OHM: - priv->is_fiber = true; - break; - } - - /* Disable WoL in 1588 register which is enabled - * by default - */ - return phy_modify_mmd(phydev, MDIO_MMD_PCS, - AT803X_PHY_MMD3_WOL_CTRL, - AT803X_WOL_EN, 0); -} - -static int at8031_config_init(struct phy_device *phydev) -{ - struct at803x_priv *priv = phydev->priv; - int ret; - - /* Some bootloaders leave the fiber page selected. - * Switch to the appropriate page (fiber or copper), as otherwise we - * read the PHY capabilities from the wrong page. - */ - phy_lock_mdio_bus(phydev); - ret = at803x_write_page(phydev, - priv->is_fiber ? AT803X_PAGE_FIBER : - AT803X_PAGE_COPPER); - phy_unlock_mdio_bus(phydev); - if (ret) - return ret; - - ret = at8031_pll_config(phydev); - if (ret < 0) - return ret; - - return at803x_config_init(phydev); -} - -static int at8031_set_wol(struct phy_device *phydev, - struct ethtool_wolinfo *wol) -{ - int ret; - - /* First setup MAC address and enable WOL interrupt */ - ret = at803x_set_wol(phydev, wol); - if (ret) - return ret; - - if (wol->wolopts & WAKE_MAGIC) - /* Enable WOL function for 1588 */ - ret = phy_modify_mmd(phydev, MDIO_MMD_PCS, - AT803X_PHY_MMD3_WOL_CTRL, - 0, AT803X_WOL_EN); - else - /* Disable WoL function for 1588 */ - ret = phy_modify_mmd(phydev, MDIO_MMD_PCS, - AT803X_PHY_MMD3_WOL_CTRL, - AT803X_WOL_EN, 0); - - return ret; -} - -static int at8031_config_intr(struct phy_device *phydev) -{ - struct at803x_priv *priv = phydev->priv; - int err, value = 0; - - if (phydev->interrupts == PHY_INTERRUPT_ENABLED && - priv->is_fiber) { - /* Clear any pending interrupts */ - err = at803x_ack_interrupt(phydev); - if (err) - return err; - - value |= AT803X_INTR_ENABLE_LINK_FAIL_BX; - value |= AT803X_INTR_ENABLE_LINK_SUCCESS_BX; - - err = phy_set_bits(phydev, AT803X_INTR_ENABLE, value); - if (err) - return err; - } - - return at803x_config_intr(phydev); -} - -/* AR8031 and AR8033 share the same read status logic */ -static int at8031_read_status(struct phy_device *phydev) -{ - struct at803x_priv *priv = phydev->priv; - - if (priv->is_1000basex) - return genphy_c37_read_status(phydev); - - return at803x_read_status(phydev); -} - -/* AR8031 and AR8035 share the same cable test get status reg */ -static int at8031_cable_test_get_status(struct phy_device *phydev, - bool *finished) -{ - return at803x_cable_test_get_status(phydev, finished, 0xf); -} - -/* AR8031 and AR8035 share the same cable test start logic */ -static int at8031_cable_test_start(struct phy_device *phydev) -{ - at803x_cable_test_autoneg(phydev); - phy_write(phydev, MII_CTRL1000, 0); - /* we do all the (time consuming) work later */ - return 0; -} - -/* AR8032, AR9331 and QCA9561 share the same cable test get status reg */ -static int at8032_cable_test_get_status(struct phy_device *phydev, - bool *finished) -{ - return at803x_cable_test_get_status(phydev, finished, 0x3); -} - -static int at8035_parse_dt(struct phy_device *phydev) -{ - struct at803x_priv *priv = phydev->priv; - - /* Mask is set by the generic at803x_parse_dt - * if property is set. Assume property is set - * with the mask not zero. - */ - if (priv->clk_25m_mask) { - /* Fixup for the AR8030/AR8035. This chip has another mask and - * doesn't support the DSP reference. Eg. the lowest bit of the - * mask. The upper two bits select the same frequencies. Mask - * the lowest bit here. - * - * Warning: - * There was no datasheet for the AR8030 available so this is - * just a guess. But the AR8035 is listed as pin compatible - * to the AR8030 so there might be a good chance it works on - * the AR8030 too. - */ - priv->clk_25m_reg &= AT8035_CLK_OUT_MASK; - priv->clk_25m_mask &= AT8035_CLK_OUT_MASK; - } - - return 0; -} - -/* AR8030 and AR8035 shared the same special mask for clk_25m */ -static int at8035_probe(struct phy_device *phydev) -{ - int ret; - - ret = at803x_probe(phydev); - if (ret) - return ret; - - return at8035_parse_dt(phydev); -} - -static int qca83xx_config_init(struct phy_device *phydev) -{ - u8 switch_revision; - - switch_revision = phydev->dev_flags & QCA8K_DEVFLAGS_REVISION_MASK; - - switch (switch_revision) { - case 1: - /* For 100M waveform */ - at803x_debug_reg_write(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL, 0x02ea); - /* Turn on Gigabit clock */ - at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_GREEN, 0x68a0); - break; - - case 2: - phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, 0x0); - fallthrough; - case 4: - phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_AZ_DEBUG, 0x803f); - at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_GREEN, 0x6860); - at803x_debug_reg_write(phydev, AT803X_DEBUG_SYSTEM_CTRL_MODE, 0x2c46); - at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_3C, 0x6000); - break; - } - - /* Following original QCA sourcecode set port to prefer master */ - phy_set_bits(phydev, MII_CTRL1000, CTL1000_PREFER_MASTER); - - return 0; -} - -static int qca8327_config_init(struct phy_device *phydev) -{ - /* QCA8327 require DAC amplitude adjustment for 100m set to +6%. - * Disable on init and enable only with 100m speed following - * qca original source code. - */ - at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL, - QCA8327_DEBUG_MANU_CTRL_EN, 0); - - return qca83xx_config_init(phydev); -} - -static void qca83xx_link_change_notify(struct phy_device *phydev) -{ - /* Set DAC Amplitude adjustment to +6% for 100m on link running */ - if (phydev->state == PHY_RUNNING) { - if (phydev->speed == SPEED_100) - at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL, - QCA8327_DEBUG_MANU_CTRL_EN, - QCA8327_DEBUG_MANU_CTRL_EN); - } else { - /* Reset DAC Amplitude adjustment */ - at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL, - QCA8327_DEBUG_MANU_CTRL_EN, 0); - } -} - -static int qca83xx_resume(struct phy_device *phydev) -{ - int ret, val; - - /* Skip reset if not suspended */ - if (!phydev->suspended) - return 0; - - /* Reinit the port, reset values set by suspend */ - qca83xx_config_init(phydev); - - /* Reset the port on port resume */ - phy_set_bits(phydev, MII_BMCR, BMCR_RESET | BMCR_ANENABLE); - - /* On resume from suspend the switch execute a reset and - * restart auto-negotiation. Wait for reset to complete. - */ - ret = phy_read_poll_timeout(phydev, MII_BMCR, val, !(val & BMCR_RESET), - 50000, 600000, true); - if (ret) - return ret; - - usleep_range(1000, 2000); - - return 0; -} - -static int qca83xx_suspend(struct phy_device *phydev) -{ - at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_GREEN, - AT803X_DEBUG_GATE_CLK_IN1000, 0); - - at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_HIB_CTRL, - AT803X_DEBUG_HIB_CTRL_EN_ANY_CHANGE | - AT803X_DEBUG_HIB_CTRL_SEL_RST_80U, 0); - - return 0; -} - -static int qca8337_suspend(struct phy_device *phydev) -{ - /* Only QCA8337 support actual suspend. */ - genphy_suspend(phydev); - - return qca83xx_suspend(phydev); -} - -static int qca8327_suspend(struct phy_device *phydev) -{ - u16 mask = 0; - - /* QCA8327 cause port unreliability when phy suspend - * is set. - */ - mask |= ~(BMCR_SPEED1000 | BMCR_FULLDPLX); - phy_modify(phydev, MII_BMCR, mask, 0); - - return qca83xx_suspend(phydev); -} - -static int qca808x_phy_fast_retrain_config(struct phy_device *phydev) -{ - int ret; - - /* Enable fast retrain */ - ret = genphy_c45_fast_retrain(phydev, true); - if (ret) - return ret; - - phy_write_mmd(phydev, MDIO_MMD_AN, QCA808X_PHY_MMD7_TOP_OPTION1, - QCA808X_TOP_OPTION1_DATA); - phy_write_mmd(phydev, MDIO_MMD_PMAPMD, QCA808X_PHY_MMD1_MSE_THRESHOLD_20DB, - QCA808X_MSE_THRESHOLD_20DB_VALUE); - phy_write_mmd(phydev, MDIO_MMD_PMAPMD, QCA808X_PHY_MMD1_MSE_THRESHOLD_17DB, - QCA808X_MSE_THRESHOLD_17DB_VALUE); - phy_write_mmd(phydev, MDIO_MMD_PMAPMD, QCA808X_PHY_MMD1_MSE_THRESHOLD_27DB, - QCA808X_MSE_THRESHOLD_27DB_VALUE); - phy_write_mmd(phydev, MDIO_MMD_PMAPMD, QCA808X_PHY_MMD1_MSE_THRESHOLD_28DB, - QCA808X_MSE_THRESHOLD_28DB_VALUE); - phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_1, - QCA808X_MMD3_DEBUG_1_VALUE); - phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_4, - QCA808X_MMD3_DEBUG_4_VALUE); - phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_5, - QCA808X_MMD3_DEBUG_5_VALUE); - phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_3, - QCA808X_MMD3_DEBUG_3_VALUE); - phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_6, - QCA808X_MMD3_DEBUG_6_VALUE); - phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_2, - QCA808X_MMD3_DEBUG_2_VALUE); - - return 0; -} - -static int qca808x_phy_ms_seed_enable(struct phy_device *phydev, bool enable) -{ - u16 seed_value; - - if (!enable) - return at803x_debug_reg_mask(phydev, QCA808X_PHY_DEBUG_LOCAL_SEED, - QCA808X_MASTER_SLAVE_SEED_ENABLE, 0); - - seed_value = get_random_u32_below(QCA808X_MASTER_SLAVE_SEED_RANGE); - return at803x_debug_reg_mask(phydev, QCA808X_PHY_DEBUG_LOCAL_SEED, - QCA808X_MASTER_SLAVE_SEED_CFG | QCA808X_MASTER_SLAVE_SEED_ENABLE, - FIELD_PREP(QCA808X_MASTER_SLAVE_SEED_CFG, seed_value) | - QCA808X_MASTER_SLAVE_SEED_ENABLE); -} - -static bool qca808x_is_prefer_master(struct phy_device *phydev) -{ - return (phydev->master_slave_get == MASTER_SLAVE_CFG_MASTER_FORCE) || - (phydev->master_slave_get == MASTER_SLAVE_CFG_MASTER_PREFERRED); -} - -static bool qca808x_has_fast_retrain_or_slave_seed(struct phy_device *phydev) -{ - return linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->supported); -} - -static int qca808x_config_init(struct phy_device *phydev) -{ - int ret; - - /* Active adc&vga on 802.3az for the link 1000M and 100M */ - ret = phy_modify_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_ADDR_CLD_CTRL7, - QCA808X_8023AZ_AFE_CTRL_MASK, QCA808X_8023AZ_AFE_EN); - if (ret) - return ret; - - /* Adjust the threshold on 802.3az for the link 1000M */ - ret = phy_write_mmd(phydev, MDIO_MMD_PCS, - QCA808X_PHY_MMD3_AZ_TRAINING_CTRL, - QCA808X_MMD3_AZ_TRAINING_VAL); - if (ret) - return ret; - - if (qca808x_has_fast_retrain_or_slave_seed(phydev)) { - /* Config the fast retrain for the link 2500M */ - ret = qca808x_phy_fast_retrain_config(phydev); - if (ret) - return ret; - - ret = genphy_read_master_slave(phydev); - if (ret < 0) - return ret; - - if (!qca808x_is_prefer_master(phydev)) { - /* Enable seed and configure lower ramdom seed to make phy - * linked as slave mode. - */ - ret = qca808x_phy_ms_seed_enable(phydev, true); - if (ret) - return ret; - } - } - - /* Configure adc threshold as 100mv for the link 10M */ - return at803x_debug_reg_mask(phydev, QCA808X_PHY_DEBUG_ADC_THRESHOLD, - QCA808X_ADC_THRESHOLD_MASK, - QCA808X_ADC_THRESHOLD_100MV); -} - -static int qca808x_read_status(struct phy_device *phydev) -{ - struct at803x_ss_mask ss_mask = { 0 }; - int ret; - - ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_STAT); - if (ret < 0) - return ret; - - linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->lp_advertising, - ret & MDIO_AN_10GBT_STAT_LP2_5G); - - ret = genphy_read_status(phydev); - if (ret) - return ret; - - /* qca8081 takes the different bits for speed value from at803x */ - ss_mask.speed_mask = QCA808X_SS_SPEED_MASK; - ss_mask.speed_shift = __bf_shf(QCA808X_SS_SPEED_MASK); - ret = at803x_read_specific_status(phydev, ss_mask); - if (ret < 0) - return ret; - - if (phydev->link) { - if (phydev->speed == SPEED_2500) - phydev->interface = PHY_INTERFACE_MODE_2500BASEX; - else - phydev->interface = PHY_INTERFACE_MODE_SGMII; - } else { - /* generate seed as a lower random value to make PHY linked as SLAVE easily, - * except for master/slave configuration fault detected or the master mode - * preferred. - * - * the reason for not putting this code into the function link_change_notify is - * the corner case where the link partner is also the qca8081 PHY and the seed - * value is configured as the same value, the link can't be up and no link change - * occurs. - */ - if (qca808x_has_fast_retrain_or_slave_seed(phydev)) { - if (phydev->master_slave_state == MASTER_SLAVE_STATE_ERR || - qca808x_is_prefer_master(phydev)) { - qca808x_phy_ms_seed_enable(phydev, false); - } else { - qca808x_phy_ms_seed_enable(phydev, true); - } - } - } - - return 0; -} - -static int qca808x_soft_reset(struct phy_device *phydev) -{ - int ret; - - ret = genphy_soft_reset(phydev); - if (ret < 0) - return ret; - - if (qca808x_has_fast_retrain_or_slave_seed(phydev)) - ret = qca808x_phy_ms_seed_enable(phydev, true); - - return ret; -} - -static bool qca808x_cdt_fault_length_valid(int cdt_code) -{ - switch (cdt_code) { - case QCA808X_CDT_STATUS_STAT_SAME_SHORT: - case QCA808X_CDT_STATUS_STAT_SAME_OPEN: - case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_NORMAL: - case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_OPEN: - case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_SHORT: - case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_NORMAL: - case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_OPEN: - case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_SHORT: - case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_NORMAL: - case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_OPEN: - case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_SHORT: - return true; - default: - return false; - } -} - -static int qca808x_cable_test_result_trans(int cdt_code) -{ - switch (cdt_code) { - case QCA808X_CDT_STATUS_STAT_NORMAL: - return ETHTOOL_A_CABLE_RESULT_CODE_OK; - case QCA808X_CDT_STATUS_STAT_SAME_SHORT: - return ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT; - case QCA808X_CDT_STATUS_STAT_SAME_OPEN: - return ETHTOOL_A_CABLE_RESULT_CODE_OPEN; - case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_NORMAL: - case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_OPEN: - case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_SHORT: - case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_NORMAL: - case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_OPEN: - case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_SHORT: - case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_NORMAL: - case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_OPEN: - case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_SHORT: - return ETHTOOL_A_CABLE_RESULT_CODE_CROSS_SHORT; - case QCA808X_CDT_STATUS_STAT_FAIL: - default: - return ETHTOOL_A_CABLE_RESULT_CODE_UNSPEC; - } -} - -static int qca808x_cdt_fault_length(struct phy_device *phydev, int pair, - int result) -{ - int val; - u32 cdt_length_reg = 0; - - switch (pair) { - case ETHTOOL_A_CABLE_PAIR_A: - cdt_length_reg = QCA808X_MMD3_CDT_DIAG_PAIR_A; - break; - case ETHTOOL_A_CABLE_PAIR_B: - cdt_length_reg = QCA808X_MMD3_CDT_DIAG_PAIR_B; - break; - case ETHTOOL_A_CABLE_PAIR_C: - cdt_length_reg = QCA808X_MMD3_CDT_DIAG_PAIR_C; - break; - case ETHTOOL_A_CABLE_PAIR_D: - cdt_length_reg = QCA808X_MMD3_CDT_DIAG_PAIR_D; - break; - default: - return -EINVAL; - } - - val = phy_read_mmd(phydev, MDIO_MMD_PCS, cdt_length_reg); - if (val < 0) - return val; - - if (result == ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT) - val = FIELD_GET(QCA808X_CDT_DIAG_LENGTH_SAME_SHORT, val); - else - val = FIELD_GET(QCA808X_CDT_DIAG_LENGTH_CROSS_SHORT, val); - - return at803x_cdt_fault_length(val); -} - -static int qca808x_cable_test_start(struct phy_device *phydev) -{ - int ret; - - /* perform CDT with the following configs: - * 1. disable hibernation. - * 2. force PHY working in MDI mode. - * 3. for PHY working in 1000BaseT. - * 4. configure the threshold. - */ - - ret = at803x_debug_reg_mask(phydev, QCA808X_DBG_AN_TEST, QCA808X_HIBERNATION_EN, 0); - if (ret < 0) - return ret; - - ret = at803x_config_mdix(phydev, ETH_TP_MDI); - if (ret < 0) - return ret; - - /* Force 1000base-T needs to configure PMA/PMD and MII_BMCR */ - phydev->duplex = DUPLEX_FULL; - phydev->speed = SPEED_1000; - ret = genphy_c45_pma_setup_forced(phydev); - if (ret < 0) - return ret; - - ret = genphy_setup_forced(phydev); - if (ret < 0) - return ret; - - /* configure the thresholds for open, short, pair ok test */ - phy_write_mmd(phydev, MDIO_MMD_PCS, 0x8074, 0xc040); - phy_write_mmd(phydev, MDIO_MMD_PCS, 0x8076, 0xc040); - phy_write_mmd(phydev, MDIO_MMD_PCS, 0x8077, 0xa060); - phy_write_mmd(phydev, MDIO_MMD_PCS, 0x8078, 0xc050); - phy_write_mmd(phydev, MDIO_MMD_PCS, 0x807a, 0xc060); - phy_write_mmd(phydev, MDIO_MMD_PCS, 0x807e, 0xb060); - - return 0; -} - -static int qca808x_cable_test_get_pair_status(struct phy_device *phydev, u8 pair, - u16 status) -{ - int length, result; - u16 pair_code; - - switch (pair) { - case ETHTOOL_A_CABLE_PAIR_A: - pair_code = FIELD_GET(QCA808X_CDT_CODE_PAIR_A, status); - break; - case ETHTOOL_A_CABLE_PAIR_B: - pair_code = FIELD_GET(QCA808X_CDT_CODE_PAIR_B, status); - break; - case ETHTOOL_A_CABLE_PAIR_C: - pair_code = FIELD_GET(QCA808X_CDT_CODE_PAIR_C, status); - break; - case ETHTOOL_A_CABLE_PAIR_D: - pair_code = FIELD_GET(QCA808X_CDT_CODE_PAIR_D, status); - break; - default: - return -EINVAL; - } - - result = qca808x_cable_test_result_trans(pair_code); - ethnl_cable_test_result(phydev, pair, result); - - if (qca808x_cdt_fault_length_valid(pair_code)) { - length = qca808x_cdt_fault_length(phydev, pair, result); - ethnl_cable_test_fault_length(phydev, pair, length); - } - - return 0; -} - -static int qca808x_cable_test_get_status(struct phy_device *phydev, bool *finished) -{ - int ret, val; - - *finished = false; - - val = QCA808X_CDT_ENABLE_TEST | - QCA808X_CDT_LENGTH_UNIT; - ret = at803x_cdt_start(phydev, val); - if (ret) - return ret; - - ret = at803x_cdt_wait_for_completion(phydev, QCA808X_CDT_ENABLE_TEST); - if (ret) - return ret; - - val = phy_read_mmd(phydev, MDIO_MMD_PCS, QCA808X_MMD3_CDT_STATUS); - if (val < 0) - return val; - - ret = qca808x_cable_test_get_pair_status(phydev, ETHTOOL_A_CABLE_PAIR_A, val); - if (ret) - return ret; - - ret = qca808x_cable_test_get_pair_status(phydev, ETHTOOL_A_CABLE_PAIR_B, val); - if (ret) - return ret; - - ret = qca808x_cable_test_get_pair_status(phydev, ETHTOOL_A_CABLE_PAIR_C, val); - if (ret) - return ret; - - ret = qca808x_cable_test_get_pair_status(phydev, ETHTOOL_A_CABLE_PAIR_D, val); - if (ret) - return ret; - - *finished = true; - - return 0; -} - -static int qca808x_get_features(struct phy_device *phydev) -{ - int ret; - - ret = genphy_c45_pma_read_abilities(phydev); - if (ret) - return ret; - - /* The autoneg ability is not existed in bit3 of MMD7.1, - * but it is supported by qca808x PHY, so we add it here - * manually. - */ - linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->supported); - - /* As for the qca8081 1G version chip, the 2500baseT ability is also - * existed in the bit0 of MMD1.21, we need to remove it manually if - * it is the qca8081 1G chip according to the bit0 of MMD7.0x901d. - */ - ret = phy_read_mmd(phydev, MDIO_MMD_AN, QCA808X_PHY_MMD7_CHIP_TYPE); - if (ret < 0) - return ret; - - if (QCA808X_PHY_CHIP_TYPE_1G & ret) - linkmode_clear_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->supported); - - return 0; -} - -static int qca808x_config_aneg(struct phy_device *phydev) -{ - int phy_ctrl = 0; - int ret; - - ret = at803x_prepare_config_aneg(phydev); - if (ret) - return ret; - - /* The reg MII_BMCR also needs to be configured for force mode, the - * genphy_config_aneg is also needed. - */ - if (phydev->autoneg == AUTONEG_DISABLE) - genphy_c45_pma_setup_forced(phydev); - - if (linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->advertising)) - phy_ctrl = MDIO_AN_10GBT_CTRL_ADV2_5G; - - ret = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL, - MDIO_AN_10GBT_CTRL_ADV2_5G, phy_ctrl); - if (ret < 0) - return ret; - - return __genphy_config_aneg(phydev, ret); -} - -static void qca808x_link_change_notify(struct phy_device *phydev) -{ - /* Assert interface sgmii fifo on link down, deassert it on link up, - * the interface device address is always phy address added by 1. - */ - mdiobus_c45_modify_changed(phydev->mdio.bus, phydev->mdio.addr + 1, - MDIO_MMD_PMAPMD, QCA8081_PHY_SERDES_MMD1_FIFO_CTRL, - QCA8081_PHY_FIFO_RSTN, - phydev->link ? QCA8081_PHY_FIFO_RSTN : 0); -} - -static struct phy_driver at803x_driver[] = { -{ - /* Qualcomm Atheros AR8035 */ - PHY_ID_MATCH_EXACT(ATH8035_PHY_ID), - .name = "Qualcomm Atheros AR8035", - .flags = PHY_POLL_CABLE_TEST, - .probe = at8035_probe, - .config_aneg = at803x_config_aneg, - .config_init = at803x_config_init, - .soft_reset = genphy_soft_reset, - .set_wol = at803x_set_wol, - .get_wol = at803x_get_wol, - .suspend = at803x_suspend, - .resume = at803x_resume, - /* PHY_GBIT_FEATURES */ - .read_status = at803x_read_status, - .config_intr = at803x_config_intr, - .handle_interrupt = at803x_handle_interrupt, - .get_tunable = at803x_get_tunable, - .set_tunable = at803x_set_tunable, - .cable_test_start = at8031_cable_test_start, - .cable_test_get_status = at8031_cable_test_get_status, -}, { - /* Qualcomm Atheros AR8030 */ - .phy_id = ATH8030_PHY_ID, - .name = "Qualcomm Atheros AR8030", - .phy_id_mask = AT8030_PHY_ID_MASK, - .probe = at8035_probe, - .config_init = at803x_config_init, - .link_change_notify = at803x_link_change_notify, - .set_wol = at803x_set_wol, - .get_wol = at803x_get_wol, - .suspend = at803x_suspend, - .resume = at803x_resume, - /* PHY_BASIC_FEATURES */ - .config_intr = at803x_config_intr, - .handle_interrupt = at803x_handle_interrupt, -}, { - /* Qualcomm Atheros AR8031/AR8033 */ - PHY_ID_MATCH_EXACT(ATH8031_PHY_ID), - .name = "Qualcomm Atheros AR8031/AR8033", - .flags = PHY_POLL_CABLE_TEST, - .probe = at8031_probe, - .config_init = at8031_config_init, - .config_aneg = at803x_config_aneg, - .soft_reset = genphy_soft_reset, - .set_wol = at8031_set_wol, - .get_wol = at803x_get_wol, - .suspend = at803x_suspend, - .resume = at803x_resume, - .read_page = at803x_read_page, - .write_page = at803x_write_page, - .get_features = at803x_get_features, - .read_status = at8031_read_status, - .config_intr = at8031_config_intr, - .handle_interrupt = at803x_handle_interrupt, - .get_tunable = at803x_get_tunable, - .set_tunable = at803x_set_tunable, - .cable_test_start = at8031_cable_test_start, - .cable_test_get_status = at8031_cable_test_get_status, -}, { - /* Qualcomm Atheros AR8032 */ - PHY_ID_MATCH_EXACT(ATH8032_PHY_ID), - .name = "Qualcomm Atheros AR8032", - .probe = at803x_probe, - .flags = PHY_POLL_CABLE_TEST, - .config_init = at803x_config_init, - .link_change_notify = at803x_link_change_notify, - .suspend = at803x_suspend, - .resume = at803x_resume, - /* PHY_BASIC_FEATURES */ - .config_intr = at803x_config_intr, - .handle_interrupt = at803x_handle_interrupt, - .cable_test_start = at803x_cable_test_start, - .cable_test_get_status = at8032_cable_test_get_status, -}, { - /* ATHEROS AR9331 */ - PHY_ID_MATCH_EXACT(ATH9331_PHY_ID), - .name = "Qualcomm Atheros AR9331 built-in PHY", - .probe = at803x_probe, - .suspend = at803x_suspend, - .resume = at803x_resume, - .flags = PHY_POLL_CABLE_TEST, - /* PHY_BASIC_FEATURES */ - .config_intr = at803x_config_intr, - .handle_interrupt = at803x_handle_interrupt, - .cable_test_start = at803x_cable_test_start, - .cable_test_get_status = at8032_cable_test_get_status, - .read_status = at803x_read_status, - .soft_reset = genphy_soft_reset, - .config_aneg = at803x_config_aneg, -}, { - /* Qualcomm Atheros QCA9561 */ - PHY_ID_MATCH_EXACT(QCA9561_PHY_ID), - .name = "Qualcomm Atheros QCA9561 built-in PHY", - .probe = at803x_probe, - .suspend = at803x_suspend, - .resume = at803x_resume, - .flags = PHY_POLL_CABLE_TEST, - /* PHY_BASIC_FEATURES */ - .config_intr = at803x_config_intr, - .handle_interrupt = at803x_handle_interrupt, - .cable_test_start = at803x_cable_test_start, - .cable_test_get_status = at8032_cable_test_get_status, - .read_status = at803x_read_status, - .soft_reset = genphy_soft_reset, - .config_aneg = at803x_config_aneg, -}, { - /* QCA8337 */ - .phy_id = QCA8337_PHY_ID, - .phy_id_mask = QCA8K_PHY_ID_MASK, - .name = "Qualcomm Atheros 8337 internal PHY", - /* PHY_GBIT_FEATURES */ - .probe = at803x_probe, - .flags = PHY_IS_INTERNAL, - .config_init = qca83xx_config_init, - .soft_reset = genphy_soft_reset, - .get_sset_count = qca83xx_get_sset_count, - .get_strings = qca83xx_get_strings, - .get_stats = qca83xx_get_stats, - .suspend = qca8337_suspend, - .resume = qca83xx_resume, -}, { - /* QCA8327-A from switch QCA8327-AL1A */ - .phy_id = QCA8327_A_PHY_ID, - .phy_id_mask = QCA8K_PHY_ID_MASK, - .name = "Qualcomm Atheros 8327-A internal PHY", - /* PHY_GBIT_FEATURES */ - .link_change_notify = qca83xx_link_change_notify, - .probe = at803x_probe, - .flags = PHY_IS_INTERNAL, - .config_init = qca8327_config_init, - .soft_reset = genphy_soft_reset, - .get_sset_count = qca83xx_get_sset_count, - .get_strings = qca83xx_get_strings, - .get_stats = qca83xx_get_stats, - .suspend = qca8327_suspend, - .resume = qca83xx_resume, -}, { - /* QCA8327-B from switch QCA8327-BL1A */ - .phy_id = QCA8327_B_PHY_ID, - .phy_id_mask = QCA8K_PHY_ID_MASK, - .name = "Qualcomm Atheros 8327-B internal PHY", - /* PHY_GBIT_FEATURES */ - .link_change_notify = qca83xx_link_change_notify, - .probe = at803x_probe, - .flags = PHY_IS_INTERNAL, - .config_init = qca8327_config_init, - .soft_reset = genphy_soft_reset, - .get_sset_count = qca83xx_get_sset_count, - .get_strings = qca83xx_get_strings, - .get_stats = qca83xx_get_stats, - .suspend = qca8327_suspend, - .resume = qca83xx_resume, -}, { - /* Qualcomm QCA8081 */ - PHY_ID_MATCH_EXACT(QCA8081_PHY_ID), - .name = "Qualcomm QCA8081", - .flags = PHY_POLL_CABLE_TEST, - .probe = at803x_probe, - .config_intr = at803x_config_intr, - .handle_interrupt = at803x_handle_interrupt, - .get_tunable = at803x_get_tunable, - .set_tunable = at803x_set_tunable, - .set_wol = at803x_set_wol, - .get_wol = at803x_get_wol, - .get_features = qca808x_get_features, - .config_aneg = qca808x_config_aneg, - .suspend = genphy_suspend, - .resume = genphy_resume, - .read_status = qca808x_read_status, - .config_init = qca808x_config_init, - .soft_reset = qca808x_soft_reset, - .cable_test_start = qca808x_cable_test_start, - .cable_test_get_status = qca808x_cable_test_get_status, - .link_change_notify = qca808x_link_change_notify, -}, }; - -module_phy_driver(at803x_driver); - -static struct mdio_device_id __maybe_unused atheros_tbl[] = { - { ATH8030_PHY_ID, AT8030_PHY_ID_MASK }, - { PHY_ID_MATCH_EXACT(ATH8031_PHY_ID) }, - { PHY_ID_MATCH_EXACT(ATH8032_PHY_ID) }, - { PHY_ID_MATCH_EXACT(ATH8035_PHY_ID) }, - { PHY_ID_MATCH_EXACT(ATH9331_PHY_ID) }, - { PHY_ID_MATCH_EXACT(QCA8337_PHY_ID) }, - { PHY_ID_MATCH_EXACT(QCA8327_A_PHY_ID) }, - { PHY_ID_MATCH_EXACT(QCA8327_B_PHY_ID) }, - { PHY_ID_MATCH_EXACT(QCA9561_PHY_ID) }, - { PHY_ID_MATCH_EXACT(QCA8081_PHY_ID) }, - { } -}; - -MODULE_DEVICE_TABLE(mdio, atheros_tbl); |