diff options
Diffstat (limited to 'drivers/net/phy/micrel.c')
-rw-r--r-- | drivers/net/phy/micrel.c | 118 |
1 files changed, 109 insertions, 9 deletions
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index ddb50a0e2b..4b22bb6393 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -785,6 +785,17 @@ static int ksz8061_config_init(struct phy_device *phydev) { int ret; + /* Chip can be powered down by the bootstrap code. */ + ret = phy_read(phydev, MII_BMCR); + if (ret < 0) + return ret; + if (ret & BMCR_PDOWN) { + ret = phy_write(phydev, MII_BMCR, ret & ~BMCR_PDOWN); + if (ret < 0) + return ret; + usleep_range(1000, 2000); + } + ret = phy_write_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_DEVID1, 0xB61A); if (ret) return ret; @@ -1858,7 +1869,7 @@ static const struct ksz9477_errata_write ksz9477_errata_writes[] = { {0x1c, 0x20, 0xeeee}, }; -static int ksz9477_config_init(struct phy_device *phydev) +static int ksz9477_phy_errata(struct phy_device *phydev) { int err; int i; @@ -1886,16 +1897,30 @@ static int ksz9477_config_init(struct phy_device *phydev) return err; } + err = genphy_restart_aneg(phydev); + if (err) + return err; + + return err; +} + +static int ksz9477_config_init(struct phy_device *phydev) +{ + int err; + + /* Only KSZ9897 family of switches needs this fix. */ + if ((phydev->phy_id & 0xf) == 1) { + err = ksz9477_phy_errata(phydev); + if (err) + return err; + } + /* According to KSZ9477 Errata DS80000754C (Module 4) all EEE modes * in this switch shall be regarded as broken. */ if (phydev->dev_flags & MICREL_NO_EEE) phydev->eee_broken_modes = -1; - err = genphy_restart_aneg(phydev); - if (err) - return err; - return kszphy_config_init(phydev); } @@ -2004,6 +2029,71 @@ static int kszphy_resume(struct phy_device *phydev) return 0; } +static int ksz9477_resume(struct phy_device *phydev) +{ + int ret; + + /* No need to initialize registers if not powered down. */ + ret = phy_read(phydev, MII_BMCR); + if (ret < 0) + return ret; + if (!(ret & BMCR_PDOWN)) + return 0; + + genphy_resume(phydev); + + /* After switching from power-down to normal mode, an internal global + * reset is automatically generated. Wait a minimum of 1 ms before + * read/write access to the PHY registers. + */ + usleep_range(1000, 2000); + + /* Only KSZ9897 family of switches needs this fix. */ + if ((phydev->phy_id & 0xf) == 1) { + ret = ksz9477_phy_errata(phydev); + if (ret) + return ret; + } + + /* Enable PHY Interrupts */ + if (phy_interrupt_is_valid(phydev)) { + phydev->interrupts = PHY_INTERRUPT_ENABLED; + if (phydev->drv->config_intr) + phydev->drv->config_intr(phydev); + } + + return 0; +} + +static int ksz8061_resume(struct phy_device *phydev) +{ + int ret; + + /* This function can be called twice when the Ethernet device is on. */ + ret = phy_read(phydev, MII_BMCR); + if (ret < 0) + return ret; + if (!(ret & BMCR_PDOWN)) + return 0; + + genphy_resume(phydev); + usleep_range(1000, 2000); + + /* Re-program the value after chip is reset. */ + ret = phy_write_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_DEVID1, 0xB61A); + if (ret) + return ret; + + /* Enable PHY Interrupts */ + if (phy_interrupt_is_valid(phydev)) { + phydev->interrupts = PHY_INTERRUPT_ENABLED; + if (phydev->drv->config_intr) + phydev->drv->config_intr(phydev); + } + + return 0; +} + static int kszphy_probe(struct phy_device *phydev) { const struct kszphy_type *type = phydev->drv->driver_data; @@ -3516,7 +3606,7 @@ static int lan8841_config_intr(struct phy_device *phydev) if (phydev->interrupts == PHY_INTERRUPT_ENABLED) { err = phy_read(phydev, LAN8814_INTS); - if (err) + if (err < 0) return err; /* Enable / disable interrupts. It is OK to enable PTP interrupt @@ -3532,6 +3622,14 @@ static int lan8841_config_intr(struct phy_device *phydev) return err; err = phy_read(phydev, LAN8814_INTS); + if (err < 0) + return err; + + /* Getting a positive value doesn't mean that is an error, it + * just indicates what was the status. Therefore make sure to + * clear the value and say that there is no error. + */ + err = 0; } return err; @@ -4676,7 +4774,8 @@ static int lan8841_suspend(struct phy_device *phydev) struct kszphy_priv *priv = phydev->priv; struct kszphy_ptp_priv *ptp_priv = &priv->ptp_priv; - ptp_cancel_worker_sync(ptp_priv->ptp_clock); + if (ptp_priv->ptp_clock) + ptp_cancel_worker_sync(ptp_priv->ptp_clock); return genphy_suspend(phydev); } @@ -4813,10 +4912,11 @@ static struct phy_driver ksphy_driver[] = { /* PHY_BASIC_FEATURES */ .probe = kszphy_probe, .config_init = ksz8061_config_init, + .soft_reset = genphy_soft_reset, .config_intr = kszphy_config_intr, .handle_interrupt = kszphy_handle_interrupt, .suspend = kszphy_suspend, - .resume = kszphy_resume, + .resume = ksz8061_resume, }, { .phy_id = PHY_ID_KSZ9021, .phy_id_mask = 0x000ffffe, @@ -4970,7 +5070,7 @@ static struct phy_driver ksphy_driver[] = { .config_intr = kszphy_config_intr, .handle_interrupt = kszphy_handle_interrupt, .suspend = genphy_suspend, - .resume = genphy_resume, + .resume = ksz9477_resume, .get_features = ksz9477_get_features, } }; |