summaryrefslogtreecommitdiffstats
path: root/drivers/net/phy/microchip.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/phy/microchip.c')
-rw-r--r--drivers/net/phy/microchip.c416
1 files changed, 416 insertions, 0 deletions
diff --git a/drivers/net/phy/microchip.c b/drivers/net/phy/microchip.c
new file mode 100644
index 0000000000..0b88635f4f
--- /dev/null
+++ b/drivers/net/phy/microchip.c
@@ -0,0 +1,416 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015 Microchip Technology
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/phy.h>
+#include <linux/microchipphy.h>
+#include <linux/delay.h>
+#include <linux/of.h>
+#include <dt-bindings/net/microchip-lan78xx.h>
+
+#define DRIVER_AUTHOR "WOOJUNG HUH <woojung.huh@microchip.com>"
+#define DRIVER_DESC "Microchip LAN88XX PHY driver"
+
+struct lan88xx_priv {
+ int chip_id;
+ int chip_rev;
+ __u32 wolopts;
+};
+
+static int lan88xx_read_page(struct phy_device *phydev)
+{
+ return __phy_read(phydev, LAN88XX_EXT_PAGE_ACCESS);
+}
+
+static int lan88xx_write_page(struct phy_device *phydev, int page)
+{
+ return __phy_write(phydev, LAN88XX_EXT_PAGE_ACCESS, page);
+}
+
+static int lan88xx_phy_config_intr(struct phy_device *phydev)
+{
+ int rc;
+
+ if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
+ /* unmask all source and clear them before enable */
+ rc = phy_write(phydev, LAN88XX_INT_MASK, 0x7FFF);
+ rc = phy_read(phydev, LAN88XX_INT_STS);
+ rc = phy_write(phydev, LAN88XX_INT_MASK,
+ LAN88XX_INT_MASK_MDINTPIN_EN_ |
+ LAN88XX_INT_MASK_LINK_CHANGE_);
+ } else {
+ rc = phy_write(phydev, LAN88XX_INT_MASK, 0);
+ if (rc)
+ return rc;
+
+ /* Ack interrupts after they have been disabled */
+ rc = phy_read(phydev, LAN88XX_INT_STS);
+ }
+
+ return rc < 0 ? rc : 0;
+}
+
+static irqreturn_t lan88xx_handle_interrupt(struct phy_device *phydev)
+{
+ int irq_status;
+
+ irq_status = phy_read(phydev, LAN88XX_INT_STS);
+ if (irq_status < 0) {
+ phy_error(phydev);
+ return IRQ_NONE;
+ }
+
+ if (!(irq_status & LAN88XX_INT_STS_LINK_CHANGE_))
+ return IRQ_NONE;
+
+ phy_trigger_machine(phydev);
+
+ return IRQ_HANDLED;
+}
+
+static int lan88xx_suspend(struct phy_device *phydev)
+{
+ struct lan88xx_priv *priv = phydev->priv;
+
+ /* do not power down PHY when WOL is enabled */
+ if (!priv->wolopts)
+ genphy_suspend(phydev);
+
+ return 0;
+}
+
+static int lan88xx_TR_reg_set(struct phy_device *phydev, u16 regaddr,
+ u32 data)
+{
+ int val, save_page, ret = 0;
+ u16 buf;
+
+ /* Save current page */
+ save_page = phy_save_page(phydev);
+ if (save_page < 0) {
+ phydev_warn(phydev, "Failed to get current page\n");
+ goto err;
+ }
+
+ /* Switch to TR page */
+ lan88xx_write_page(phydev, LAN88XX_EXT_PAGE_ACCESS_TR);
+
+ ret = __phy_write(phydev, LAN88XX_EXT_PAGE_TR_LOW_DATA,
+ (data & 0xFFFF));
+ if (ret < 0) {
+ phydev_warn(phydev, "Failed to write TR low data\n");
+ goto err;
+ }
+
+ ret = __phy_write(phydev, LAN88XX_EXT_PAGE_TR_HIGH_DATA,
+ (data & 0x00FF0000) >> 16);
+ if (ret < 0) {
+ phydev_warn(phydev, "Failed to write TR high data\n");
+ goto err;
+ }
+
+ /* Config control bits [15:13] of register */
+ buf = (regaddr & ~(0x3 << 13));/* Clr [14:13] to write data in reg */
+ buf |= 0x8000; /* Set [15] to Packet transmit */
+
+ ret = __phy_write(phydev, LAN88XX_EXT_PAGE_TR_CR, buf);
+ if (ret < 0) {
+ phydev_warn(phydev, "Failed to write data in reg\n");
+ goto err;
+ }
+
+ usleep_range(1000, 2000);/* Wait for Data to be written */
+ val = __phy_read(phydev, LAN88XX_EXT_PAGE_TR_CR);
+ if (!(val & 0x8000))
+ phydev_warn(phydev, "TR Register[0x%X] configuration failed\n",
+ regaddr);
+err:
+ return phy_restore_page(phydev, save_page, ret);
+}
+
+static void lan88xx_config_TR_regs(struct phy_device *phydev)
+{
+ int err;
+
+ /* Get access to Channel 0x1, Node 0xF , Register 0x01.
+ * Write 24-bit value 0x12B00A to register. Setting MrvlTrFix1000Kf,
+ * MrvlTrFix1000Kp, MasterEnableTR bits.
+ */
+ err = lan88xx_TR_reg_set(phydev, 0x0F82, 0x12B00A);
+ if (err < 0)
+ phydev_warn(phydev, "Failed to Set Register[0x0F82]\n");
+
+ /* Get access to Channel b'10, Node b'1101, Register 0x06.
+ * Write 24-bit value 0xD2C46F to register. Setting SSTrKf1000Slv,
+ * SSTrKp1000Mas bits.
+ */
+ err = lan88xx_TR_reg_set(phydev, 0x168C, 0xD2C46F);
+ if (err < 0)
+ phydev_warn(phydev, "Failed to Set Register[0x168C]\n");
+
+ /* Get access to Channel b'10, Node b'1111, Register 0x11.
+ * Write 24-bit value 0x620 to register. Setting rem_upd_done_thresh
+ * bits
+ */
+ err = lan88xx_TR_reg_set(phydev, 0x17A2, 0x620);
+ if (err < 0)
+ phydev_warn(phydev, "Failed to Set Register[0x17A2]\n");
+
+ /* Get access to Channel b'10, Node b'1101, Register 0x10.
+ * Write 24-bit value 0xEEFFDD to register. Setting
+ * eee_TrKp1Long_1000, eee_TrKp2Long_1000, eee_TrKp3Long_1000,
+ * eee_TrKp1Short_1000,eee_TrKp2Short_1000, eee_TrKp3Short_1000 bits.
+ */
+ err = lan88xx_TR_reg_set(phydev, 0x16A0, 0xEEFFDD);
+ if (err < 0)
+ phydev_warn(phydev, "Failed to Set Register[0x16A0]\n");
+
+ /* Get access to Channel b'10, Node b'1101, Register 0x13.
+ * Write 24-bit value 0x071448 to register. Setting
+ * slv_lpi_tr_tmr_val1, slv_lpi_tr_tmr_val2 bits.
+ */
+ err = lan88xx_TR_reg_set(phydev, 0x16A6, 0x071448);
+ if (err < 0)
+ phydev_warn(phydev, "Failed to Set Register[0x16A6]\n");
+
+ /* Get access to Channel b'10, Node b'1101, Register 0x12.
+ * Write 24-bit value 0x13132F to register. Setting
+ * slv_sigdet_timer_val1, slv_sigdet_timer_val2 bits.
+ */
+ err = lan88xx_TR_reg_set(phydev, 0x16A4, 0x13132F);
+ if (err < 0)
+ phydev_warn(phydev, "Failed to Set Register[0x16A4]\n");
+
+ /* Get access to Channel b'10, Node b'1101, Register 0x14.
+ * Write 24-bit value 0x0 to register. Setting eee_3level_delay,
+ * eee_TrKf_freeze_delay bits.
+ */
+ err = lan88xx_TR_reg_set(phydev, 0x16A8, 0x0);
+ if (err < 0)
+ phydev_warn(phydev, "Failed to Set Register[0x16A8]\n");
+
+ /* Get access to Channel b'01, Node b'1111, Register 0x34.
+ * Write 24-bit value 0x91B06C to register. Setting
+ * FastMseSearchThreshLong1000, FastMseSearchThreshShort1000,
+ * FastMseSearchUpdGain1000 bits.
+ */
+ err = lan88xx_TR_reg_set(phydev, 0x0FE8, 0x91B06C);
+ if (err < 0)
+ phydev_warn(phydev, "Failed to Set Register[0x0FE8]\n");
+
+ /* Get access to Channel b'01, Node b'1111, Register 0x3E.
+ * Write 24-bit value 0xC0A028 to register. Setting
+ * FastMseKp2ThreshLong1000, FastMseKp2ThreshShort1000,
+ * FastMseKp2UpdGain1000, FastMseKp2ExitEn1000 bits.
+ */
+ err = lan88xx_TR_reg_set(phydev, 0x0FFC, 0xC0A028);
+ if (err < 0)
+ phydev_warn(phydev, "Failed to Set Register[0x0FFC]\n");
+
+ /* Get access to Channel b'01, Node b'1111, Register 0x35.
+ * Write 24-bit value 0x041600 to register. Setting
+ * FastMseSearchPhShNum1000, FastMseSearchClksPerPh1000,
+ * FastMsePhChangeDelay1000 bits.
+ */
+ err = lan88xx_TR_reg_set(phydev, 0x0FEA, 0x041600);
+ if (err < 0)
+ phydev_warn(phydev, "Failed to Set Register[0x0FEA]\n");
+
+ /* Get access to Channel b'10, Node b'1101, Register 0x03.
+ * Write 24-bit value 0x000004 to register. Setting TrFreeze bits.
+ */
+ err = lan88xx_TR_reg_set(phydev, 0x1686, 0x000004);
+ if (err < 0)
+ phydev_warn(phydev, "Failed to Set Register[0x1686]\n");
+}
+
+static int lan88xx_probe(struct phy_device *phydev)
+{
+ struct device *dev = &phydev->mdio.dev;
+ struct lan88xx_priv *priv;
+ u32 led_modes[4];
+ int len;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->wolopts = 0;
+
+ len = of_property_read_variable_u32_array(dev->of_node,
+ "microchip,led-modes",
+ led_modes,
+ 0,
+ ARRAY_SIZE(led_modes));
+ if (len >= 0) {
+ u32 reg = 0;
+ int i;
+
+ for (i = 0; i < len; i++) {
+ if (led_modes[i] > 15)
+ return -EINVAL;
+ reg |= led_modes[i] << (i * 4);
+ }
+ for (; i < ARRAY_SIZE(led_modes); i++)
+ reg |= LAN78XX_FORCE_LED_OFF << (i * 4);
+ (void)phy_write(phydev, LAN78XX_PHY_LED_MODE_SELECT, reg);
+ } else if (len == -EOVERFLOW) {
+ return -EINVAL;
+ }
+
+ /* these values can be used to identify internal PHY */
+ priv->chip_id = phy_read_mmd(phydev, 3, LAN88XX_MMD3_CHIP_ID);
+ priv->chip_rev = phy_read_mmd(phydev, 3, LAN88XX_MMD3_CHIP_REV);
+
+ phydev->priv = priv;
+
+ return 0;
+}
+
+static void lan88xx_remove(struct phy_device *phydev)
+{
+ struct device *dev = &phydev->mdio.dev;
+ struct lan88xx_priv *priv = phydev->priv;
+
+ if (priv)
+ devm_kfree(dev, priv);
+}
+
+static int lan88xx_set_wol(struct phy_device *phydev,
+ struct ethtool_wolinfo *wol)
+{
+ struct lan88xx_priv *priv = phydev->priv;
+
+ priv->wolopts = wol->wolopts;
+
+ return 0;
+}
+
+static void lan88xx_set_mdix(struct phy_device *phydev)
+{
+ int buf;
+ int val;
+
+ switch (phydev->mdix_ctrl) {
+ case ETH_TP_MDI:
+ val = LAN88XX_EXT_MODE_CTRL_MDI_;
+ break;
+ case ETH_TP_MDI_X:
+ val = LAN88XX_EXT_MODE_CTRL_MDI_X_;
+ break;
+ case ETH_TP_MDI_AUTO:
+ val = LAN88XX_EXT_MODE_CTRL_AUTO_MDIX_;
+ break;
+ default:
+ return;
+ }
+
+ phy_write(phydev, LAN88XX_EXT_PAGE_ACCESS, LAN88XX_EXT_PAGE_SPACE_1);
+ buf = phy_read(phydev, LAN88XX_EXT_MODE_CTRL);
+ buf &= ~LAN88XX_EXT_MODE_CTRL_MDIX_MASK_;
+ buf |= val;
+ phy_write(phydev, LAN88XX_EXT_MODE_CTRL, buf);
+ phy_write(phydev, LAN88XX_EXT_PAGE_ACCESS, LAN88XX_EXT_PAGE_SPACE_0);
+}
+
+static int lan88xx_config_init(struct phy_device *phydev)
+{
+ int val;
+
+ /*Zerodetect delay enable */
+ val = phy_read_mmd(phydev, MDIO_MMD_PCS,
+ PHY_ARDENNES_MMD_DEV_3_PHY_CFG);
+ val |= PHY_ARDENNES_MMD_DEV_3_PHY_CFG_ZD_DLY_EN_;
+
+ phy_write_mmd(phydev, MDIO_MMD_PCS, PHY_ARDENNES_MMD_DEV_3_PHY_CFG,
+ val);
+
+ /* Config DSP registers */
+ lan88xx_config_TR_regs(phydev);
+
+ return 0;
+}
+
+static int lan88xx_config_aneg(struct phy_device *phydev)
+{
+ lan88xx_set_mdix(phydev);
+
+ return genphy_config_aneg(phydev);
+}
+
+static void lan88xx_link_change_notify(struct phy_device *phydev)
+{
+ int temp;
+
+ /* At forced 100 F/H mode, chip may fail to set mode correctly
+ * when cable is switched between long(~50+m) and short one.
+ * As workaround, set to 10 before setting to 100
+ * at forced 100 F/H mode.
+ */
+ if (!phydev->autoneg && phydev->speed == 100) {
+ /* disable phy interrupt */
+ temp = phy_read(phydev, LAN88XX_INT_MASK);
+ temp &= ~LAN88XX_INT_MASK_MDINTPIN_EN_;
+ phy_write(phydev, LAN88XX_INT_MASK, temp);
+
+ temp = phy_read(phydev, MII_BMCR);
+ temp &= ~(BMCR_SPEED100 | BMCR_SPEED1000);
+ phy_write(phydev, MII_BMCR, temp); /* set to 10 first */
+ temp |= BMCR_SPEED100;
+ phy_write(phydev, MII_BMCR, temp); /* set to 100 later */
+
+ /* clear pending interrupt generated while workaround */
+ temp = phy_read(phydev, LAN88XX_INT_STS);
+
+ /* enable phy interrupt back */
+ temp = phy_read(phydev, LAN88XX_INT_MASK);
+ temp |= LAN88XX_INT_MASK_MDINTPIN_EN_;
+ phy_write(phydev, LAN88XX_INT_MASK, temp);
+ }
+}
+
+static struct phy_driver microchip_phy_driver[] = {
+{
+ .phy_id = 0x0007c132,
+ /* This mask (0xfffffff2) is to differentiate from
+ * LAN8742 (phy_id 0x0007c130 and 0x0007c131)
+ * and allows future phy_id revisions.
+ */
+ .phy_id_mask = 0xfffffff2,
+ .name = "Microchip LAN88xx",
+
+ /* PHY_GBIT_FEATURES */
+
+ .probe = lan88xx_probe,
+ .remove = lan88xx_remove,
+
+ .config_init = lan88xx_config_init,
+ .config_aneg = lan88xx_config_aneg,
+ .link_change_notify = lan88xx_link_change_notify,
+
+ .config_intr = lan88xx_phy_config_intr,
+ .handle_interrupt = lan88xx_handle_interrupt,
+
+ .suspend = lan88xx_suspend,
+ .resume = genphy_resume,
+ .set_wol = lan88xx_set_wol,
+ .read_page = lan88xx_read_page,
+ .write_page = lan88xx_write_page,
+} };
+
+module_phy_driver(microchip_phy_driver);
+
+static struct mdio_device_id __maybe_unused microchip_tbl[] = {
+ { 0x0007c132, 0xfffffff2 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(mdio, microchip_tbl);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");