diff options
Diffstat (limited to 'drivers/net/phy/phy_device.c')
| -rw-r--r-- | drivers/net/phy/phy_device.c | 195 |
1 files changed, 186 insertions, 9 deletions
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 8efa2a136f..6c6ec94757 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -148,6 +148,14 @@ static const int phy_eee_cap1_features_array[] = { __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_eee_cap1_features) __ro_after_init; EXPORT_SYMBOL_GPL(phy_eee_cap1_features); +static const int phy_eee_cap2_features_array[] = { + ETHTOOL_LINK_MODE_2500baseT_Full_BIT, + ETHTOOL_LINK_MODE_5000baseT_Full_BIT, +}; + +__ETHTOOL_DECLARE_LINK_MODE_MASK(phy_eee_cap2_features) __ro_after_init; +EXPORT_SYMBOL_GPL(phy_eee_cap2_features); + static void features_init(void) { /* 10/100 half/full*/ @@ -232,6 +240,9 @@ static void features_init(void) linkmode_set_bit_array(phy_eee_cap1_features_array, ARRAY_SIZE(phy_eee_cap1_features_array), phy_eee_cap1_features); + linkmode_set_bit_array(phy_eee_cap2_features_array, + ARRAY_SIZE(phy_eee_cap2_features_array), + phy_eee_cap2_features); } @@ -780,7 +791,7 @@ static int get_phy_c45_devs_in_pkg(struct mii_bus *bus, int addr, int dev_addr, * and identifiers in @c45_ids. * * Returns zero on success, %-EIO on bus access error, or %-ENODEV if - * the "devices in package" is invalid. + * the "devices in package" is invalid or no device responds. */ static int get_phy_c45_ids(struct mii_bus *bus, int addr, struct phy_c45_device_ids *c45_ids) @@ -803,7 +814,11 @@ static int get_phy_c45_ids(struct mii_bus *bus, int addr, */ ret = phy_c45_probe_present(bus, addr, i); if (ret < 0) - return -EIO; + /* returning -ENODEV doesn't stop bus + * scanning + */ + return (phy_reg == -EIO || + phy_reg == -ENODEV) ? -ENODEV : -EIO; if (!ret) continue; @@ -1413,7 +1428,7 @@ int phy_sfp_probe(struct phy_device *phydev, } EXPORT_SYMBOL(phy_sfp_probe); -static bool phy_drv_supports_irq(struct phy_driver *phydrv) +static bool phy_drv_supports_irq(const struct phy_driver *phydrv) { return phydrv->config_intr && phydrv->handle_interrupt; } @@ -1600,7 +1615,6 @@ EXPORT_SYMBOL(phy_attach_direct); struct phy_device *phy_attach(struct net_device *dev, const char *bus_id, phy_interface_t interface) { - struct bus_type *bus = &mdio_bus_type; struct phy_device *phydev; struct device *d; int rc; @@ -1611,7 +1625,7 @@ struct phy_device *phy_attach(struct net_device *dev, const char *bus_id, /* Search the list of PHY devices on the mdio bus for the * PHY with the requested name */ - d = bus_find_device_by_name(bus, NULL, bus_id); + d = bus_find_device_by_name(&mdio_bus_type, NULL, bus_id); if (!d) { pr_err("PHY %s not found\n", bus_id); return ERR_PTR(-ENODEV); @@ -1708,6 +1722,7 @@ int phy_package_join(struct phy_device *phydev, int base_addr, size_t priv_size) shared->priv_size = priv_size; } shared->base_addr = base_addr; + shared->np = NULL; refcount_set(&shared->refcnt, 1); bus->shared[base_addr] = shared; } else { @@ -1731,6 +1746,63 @@ err_unlock: EXPORT_SYMBOL_GPL(phy_package_join); /** + * of_phy_package_join - join a common PHY group in PHY package + * @phydev: target phy_device struct + * @priv_size: if non-zero allocate this amount of bytes for private data + * + * This is a variant of phy_package_join for PHY package defined in DT. + * + * The parent node of the @phydev is checked as a valid PHY package node + * structure (by matching the node name "ethernet-phy-package") and the + * base_addr for the PHY package is passed to phy_package_join. + * + * With this configuration the shared struct will also have the np value + * filled to use additional DT defined properties in PHY specific + * probe_once and config_init_once PHY package OPs. + * + * Returns < 0 on error, 0 on success. Esp. calling phy_package_join() + * with the same cookie but a different priv_size is an error. Or a parent + * node is not detected or is not valid or doesn't match the expected node + * name for PHY package. + */ +int of_phy_package_join(struct phy_device *phydev, size_t priv_size) +{ + struct device_node *node = phydev->mdio.dev.of_node; + struct device_node *package_node; + u32 base_addr; + int ret; + + if (!node) + return -EINVAL; + + package_node = of_get_parent(node); + if (!package_node) + return -EINVAL; + + if (!of_node_name_eq(package_node, "ethernet-phy-package")) { + ret = -EINVAL; + goto exit; + } + + if (of_property_read_u32(package_node, "reg", &base_addr)) { + ret = -EINVAL; + goto exit; + } + + ret = phy_package_join(phydev, base_addr, priv_size); + if (ret) + goto exit; + + phydev->shared->np = package_node; + + return 0; +exit: + of_node_put(package_node); + return ret; +} +EXPORT_SYMBOL_GPL(of_phy_package_join); + +/** * phy_package_leave - leave a common PHY group * @phydev: target phy_device struct * @@ -1746,6 +1818,10 @@ void phy_package_leave(struct phy_device *phydev) if (!shared) return; + /* Decrease the node refcount on leave if present */ + if (shared->np) + of_node_put(shared->np); + if (refcount_dec_and_mutex_lock(&shared->refcnt, &bus->shared_lock)) { bus->shared[shared->base_addr] = NULL; mutex_unlock(&bus->shared_lock); @@ -1799,6 +1875,40 @@ int devm_phy_package_join(struct device *dev, struct phy_device *phydev, EXPORT_SYMBOL_GPL(devm_phy_package_join); /** + * devm_of_phy_package_join - resource managed of_phy_package_join() + * @dev: device that is registering this PHY package + * @phydev: target phy_device struct + * @priv_size: if non-zero allocate this amount of bytes for private data + * + * Managed of_phy_package_join(). Shared storage fetched by this function, + * phy_package_leave() is automatically called on driver detach. See + * of_phy_package_join() for more information. + */ +int devm_of_phy_package_join(struct device *dev, struct phy_device *phydev, + size_t priv_size) +{ + struct phy_device **ptr; + int ret; + + ptr = devres_alloc(devm_phy_package_leave, sizeof(*ptr), + GFP_KERNEL); + if (!ptr) + return -ENOMEM; + + ret = of_phy_package_join(phydev, priv_size); + + if (!ret) { + *ptr = phydev; + devres_add(dev, ptr); + } else { + devres_free(ptr); + } + + return ret; +} +EXPORT_SYMBOL_GPL(devm_of_phy_package_join); + +/** * phy_detach - detach a PHY device from its network device * @phydev: target phy_device struct * @@ -1867,7 +1977,7 @@ int phy_suspend(struct phy_device *phydev) { struct ethtool_wolinfo wol = { .cmd = ETHTOOL_GWOL }; struct net_device *netdev = phydev->attached_dev; - struct phy_driver *phydrv = phydev->drv; + const struct phy_driver *phydrv = phydev->drv; int ret; if (phydev->suspended) @@ -1892,7 +2002,7 @@ EXPORT_SYMBOL(phy_suspend); int __phy_resume(struct phy_device *phydev) { - struct phy_driver *phydrv = phydev->drv; + const struct phy_driver *phydrv = phydev->drv; int ret; lockdep_assert_held(&phydev->lock); @@ -2521,12 +2631,15 @@ EXPORT_SYMBOL(genphy_read_status); /** * genphy_c37_read_status - check the link status and update current link state * @phydev: target phy_device struct + * @changed: pointer where to store if link changed * * Description: Check the link, then figure out the current state * by comparing what we advertise with what the link partner * advertises. This function is for Clause 37 1000Base-X mode. + * + * If link has changed, @changed is set to true, false otherwise. */ -int genphy_c37_read_status(struct phy_device *phydev) +int genphy_c37_read_status(struct phy_device *phydev, bool *changed) { int lpa, err, old_link = phydev->link; @@ -2536,9 +2649,13 @@ int genphy_c37_read_status(struct phy_device *phydev) return err; /* why bother the PHY if nothing can have changed */ - if (phydev->autoneg == AUTONEG_ENABLE && old_link && phydev->link) + if (phydev->autoneg == AUTONEG_ENABLE && old_link && phydev->link) { + *changed = false; return 0; + } + /* Signal link has changed */ + *changed = true; phydev->duplex = DUPLEX_UNKNOWN; phydev->pause = 0; phydev->asym_pause = 0; @@ -2778,6 +2895,50 @@ void phy_advertise_supported(struct phy_device *phydev) EXPORT_SYMBOL(phy_advertise_supported); /** + * phy_advertise_eee_all - Advertise all supported EEE modes + * @phydev: target phy_device struct + * + * Description: Per default phylib preserves the EEE advertising at the time of + * phy probing, which might be a subset of the supported EEE modes. Use this + * function when all supported EEE modes should be advertised. This does not + * trigger auto-negotiation, so must be called before phy_start()/ + * phylink_start() which will start auto-negotiation. + */ +void phy_advertise_eee_all(struct phy_device *phydev) +{ + linkmode_copy(phydev->advertising_eee, phydev->supported_eee); +} +EXPORT_SYMBOL_GPL(phy_advertise_eee_all); + +/** + * phy_support_eee - Set initial EEE policy configuration + * @phydev: Target phy_device struct + * + * This function configures the initial policy for Energy Efficient Ethernet + * (EEE) on the specified PHY device, influencing that EEE capabilities are + * advertised before the link is established. It should be called during PHY + * registration by the MAC driver and/or the PHY driver (for SmartEEE PHYs) + * if MAC supports LPI or PHY is capable to compensate missing LPI functionality + * of the MAC. + * + * The function sets default EEE policy parameters, including preparing the PHY + * to advertise EEE capabilities based on hardware support. + * + * It also sets the expected configuration for Low Power Idle (LPI) in the MAC + * driver. If the PHY framework determines that both local and remote + * advertisements support EEE, and the negotiated link mode is compatible with + * EEE, it will set enable_tx_lpi = true. The MAC driver is expected to act on + * this setting by enabling the LPI timer if enable_tx_lpi is set. + */ +void phy_support_eee(struct phy_device *phydev) +{ + linkmode_copy(phydev->advertising_eee, phydev->supported_eee); + phydev->eee_cfg.tx_lpi_enabled = true; + phydev->eee_cfg.eee_enabled = true; +} +EXPORT_SYMBOL(phy_support_eee); + +/** * phy_support_sym_pause - Enable support of symmetrical pause * @phydev: target phy_device struct * @@ -3100,6 +3261,7 @@ static int of_phy_led(struct phy_device *phydev, struct device *dev = &phydev->mdio.dev; struct led_init_data init_data = {}; struct led_classdev *cdev; + unsigned long modes = 0; struct phy_led *phyled; u32 index; int err; @@ -3117,6 +3279,21 @@ static int of_phy_led(struct phy_device *phydev, if (index > U8_MAX) return -EINVAL; + if (of_property_read_bool(led, "active-low")) + set_bit(PHY_LED_ACTIVE_LOW, &modes); + if (of_property_read_bool(led, "inactive-high-impedance")) + set_bit(PHY_LED_INACTIVE_HIGH_IMPEDANCE, &modes); + + if (modes) { + /* Return error if asked to set polarity modes but not supported */ + if (!phydev->drv->led_polarity_set) + return -EINVAL; + + err = phydev->drv->led_polarity_set(phydev, index, modes); + if (err) + return err; + } + phyled->index = index; if (phydev->drv->led_brightness_set) cdev->brightness_set_blocking = phy_led_set_brightness; |