diff options
Diffstat (limited to 'drivers/net/phy/phylink.c')
| -rw-r--r-- | drivers/net/phy/phylink.c | 3744 |
1 files changed, 3744 insertions, 0 deletions
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c new file mode 100644 index 0000000000..b5f012619e --- /dev/null +++ b/drivers/net/phy/phylink.c @@ -0,0 +1,3744 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * phylink models the MAC to optional PHY connection, supporting + * technologies such as SFP cages where the PHY is hot-pluggable. + * + * Copyright (C) 2015 Russell King + */ +#include <linux/acpi.h> +#include <linux/ethtool.h> +#include <linux/export.h> +#include <linux/gpio/consumer.h> +#include <linux/netdevice.h> +#include <linux/of.h> +#include <linux/of_mdio.h> +#include <linux/phy.h> +#include <linux/phy_fixed.h> +#include <linux/phylink.h> +#include <linux/rtnetlink.h> +#include <linux/spinlock.h> +#include <linux/timer.h> +#include <linux/workqueue.h> + +#include "sfp.h" +#include "swphy.h" + +#define SUPPORTED_INTERFACES \ + (SUPPORTED_TP | SUPPORTED_MII | SUPPORTED_FIBRE | \ + SUPPORTED_BNC | SUPPORTED_AUI | SUPPORTED_Backplane) +#define ADVERTISED_INTERFACES \ + (ADVERTISED_TP | ADVERTISED_MII | ADVERTISED_FIBRE | \ + ADVERTISED_BNC | ADVERTISED_AUI | ADVERTISED_Backplane) + +enum { + PHYLINK_DISABLE_STOPPED, + PHYLINK_DISABLE_LINK, + PHYLINK_DISABLE_MAC_WOL, + + PCS_STATE_DOWN = 0, + PCS_STATE_STARTING, + PCS_STATE_STARTED, +}; + +/** + * struct phylink - internal data type for phylink + */ +struct phylink { + /* private: */ + struct net_device *netdev; + const struct phylink_mac_ops *mac_ops; + struct phylink_config *config; + struct phylink_pcs *pcs; + struct device *dev; + unsigned int old_link_state:1; + + unsigned long phylink_disable_state; /* bitmask of disables */ + struct phy_device *phydev; + phy_interface_t link_interface; /* PHY_INTERFACE_xxx */ + u8 cfg_link_an_mode; /* MLO_AN_xxx */ + u8 cur_link_an_mode; + u8 link_port; /* The current non-phy ethtool port */ + __ETHTOOL_DECLARE_LINK_MODE_MASK(supported); + + /* The link configuration settings */ + struct phylink_link_state link_config; + + /* The current settings */ + phy_interface_t cur_interface; + + struct gpio_desc *link_gpio; + unsigned int link_irq; + struct timer_list link_poll; + void (*get_fixed_state)(struct net_device *dev, + struct phylink_link_state *s); + + struct mutex state_mutex; + struct phylink_link_state phy_state; + struct work_struct resolve; + unsigned int pcs_neg_mode; + unsigned int pcs_state; + + bool mac_link_dropped; + bool using_mac_select_pcs; + + struct sfp_bus *sfp_bus; + bool sfp_may_have_phy; + DECLARE_PHY_INTERFACE_MASK(sfp_interfaces); + __ETHTOOL_DECLARE_LINK_MODE_MASK(sfp_support); + u8 sfp_port; +}; + +#define phylink_printk(level, pl, fmt, ...) \ + do { \ + if ((pl)->config->type == PHYLINK_NETDEV) \ + netdev_printk(level, (pl)->netdev, fmt, ##__VA_ARGS__); \ + else if ((pl)->config->type == PHYLINK_DEV) \ + dev_printk(level, (pl)->dev, fmt, ##__VA_ARGS__); \ + } while (0) + +#define phylink_err(pl, fmt, ...) \ + phylink_printk(KERN_ERR, pl, fmt, ##__VA_ARGS__) +#define phylink_warn(pl, fmt, ...) \ + phylink_printk(KERN_WARNING, pl, fmt, ##__VA_ARGS__) +#define phylink_info(pl, fmt, ...) \ + phylink_printk(KERN_INFO, pl, fmt, ##__VA_ARGS__) +#if defined(CONFIG_DYNAMIC_DEBUG) +#define phylink_dbg(pl, fmt, ...) \ +do { \ + if ((pl)->config->type == PHYLINK_NETDEV) \ + netdev_dbg((pl)->netdev, fmt, ##__VA_ARGS__); \ + else if ((pl)->config->type == PHYLINK_DEV) \ + dev_dbg((pl)->dev, fmt, ##__VA_ARGS__); \ +} while (0) +#elif defined(DEBUG) +#define phylink_dbg(pl, fmt, ...) \ + phylink_printk(KERN_DEBUG, pl, fmt, ##__VA_ARGS__) +#else +#define phylink_dbg(pl, fmt, ...) \ +({ \ + if (0) \ + phylink_printk(KERN_DEBUG, pl, fmt, ##__VA_ARGS__); \ +}) +#endif + +/** + * phylink_set_port_modes() - set the port type modes in the ethtool mask + * @mask: ethtool link mode mask + * + * Sets all the port type modes in the ethtool mask. MAC drivers should + * use this in their 'validate' callback. + */ +void phylink_set_port_modes(unsigned long *mask) +{ + phylink_set(mask, TP); + phylink_set(mask, AUI); + phylink_set(mask, MII); + phylink_set(mask, FIBRE); + phylink_set(mask, BNC); + phylink_set(mask, Backplane); +} +EXPORT_SYMBOL_GPL(phylink_set_port_modes); + +static int phylink_is_empty_linkmode(const unsigned long *linkmode) +{ + __ETHTOOL_DECLARE_LINK_MODE_MASK(tmp) = { 0, }; + + phylink_set_port_modes(tmp); + phylink_set(tmp, Autoneg); + phylink_set(tmp, Pause); + phylink_set(tmp, Asym_Pause); + + return linkmode_subset(linkmode, tmp); +} + +static const char *phylink_an_mode_str(unsigned int mode) +{ + static const char *modestr[] = { + [MLO_AN_PHY] = "phy", + [MLO_AN_FIXED] = "fixed", + [MLO_AN_INBAND] = "inband", + }; + + return mode < ARRAY_SIZE(modestr) ? modestr[mode] : "unknown"; +} + +static unsigned int phylink_interface_signal_rate(phy_interface_t interface) +{ + switch (interface) { + case PHY_INTERFACE_MODE_SGMII: + case PHY_INTERFACE_MODE_1000BASEX: /* 1.25Mbd */ + return 1250; + case PHY_INTERFACE_MODE_2500BASEX: /* 3.125Mbd */ + return 3125; + case PHY_INTERFACE_MODE_5GBASER: /* 5.15625Mbd */ + return 5156; + case PHY_INTERFACE_MODE_10GBASER: /* 10.3125Mbd */ + return 10313; + default: + return 0; + } +} + +/** + * phylink_interface_max_speed() - get the maximum speed of a phy interface + * @interface: phy interface mode defined by &typedef phy_interface_t + * + * Determine the maximum speed of a phy interface. This is intended to help + * determine the correct speed to pass to the MAC when the phy is performing + * rate matching. + * + * Return: The maximum speed of @interface + */ +static int phylink_interface_max_speed(phy_interface_t interface) +{ + switch (interface) { + case PHY_INTERFACE_MODE_100BASEX: + case PHY_INTERFACE_MODE_REVRMII: + case PHY_INTERFACE_MODE_RMII: + case PHY_INTERFACE_MODE_SMII: + case PHY_INTERFACE_MODE_REVMII: + case PHY_INTERFACE_MODE_MII: + return SPEED_100; + + case PHY_INTERFACE_MODE_TBI: + case PHY_INTERFACE_MODE_MOCA: + case PHY_INTERFACE_MODE_RTBI: + case PHY_INTERFACE_MODE_1000BASEX: + case PHY_INTERFACE_MODE_1000BASEKX: + case PHY_INTERFACE_MODE_TRGMII: + case PHY_INTERFACE_MODE_RGMII_TXID: + case PHY_INTERFACE_MODE_RGMII_RXID: + case PHY_INTERFACE_MODE_RGMII_ID: + case PHY_INTERFACE_MODE_RGMII: + case PHY_INTERFACE_MODE_PSGMII: + case PHY_INTERFACE_MODE_QSGMII: + case PHY_INTERFACE_MODE_QUSGMII: + case PHY_INTERFACE_MODE_SGMII: + case PHY_INTERFACE_MODE_GMII: + return SPEED_1000; + + case PHY_INTERFACE_MODE_2500BASEX: + return SPEED_2500; + + case PHY_INTERFACE_MODE_5GBASER: + return SPEED_5000; + + case PHY_INTERFACE_MODE_XGMII: + case PHY_INTERFACE_MODE_RXAUI: + case PHY_INTERFACE_MODE_XAUI: + case PHY_INTERFACE_MODE_10GBASER: + case PHY_INTERFACE_MODE_10GKR: + case PHY_INTERFACE_MODE_USXGMII: + return SPEED_10000; + + case PHY_INTERFACE_MODE_25GBASER: + return SPEED_25000; + + case PHY_INTERFACE_MODE_XLGMII: + return SPEED_40000; + + case PHY_INTERFACE_MODE_INTERNAL: + case PHY_INTERFACE_MODE_NA: + case PHY_INTERFACE_MODE_MAX: + /* No idea! Garbage in, unknown out */ + return SPEED_UNKNOWN; + } + + /* If we get here, someone forgot to add an interface mode above */ + WARN_ON_ONCE(1); + return SPEED_UNKNOWN; +} + +/** + * phylink_caps_to_linkmodes() - Convert capabilities to ethtool link modes + * @linkmodes: ethtool linkmode mask (must be already initialised) + * @caps: bitmask of MAC capabilities + * + * Set all possible pause, speed and duplex linkmodes in @linkmodes that are + * supported by the @caps. @linkmodes must have been initialised previously. + */ +void phylink_caps_to_linkmodes(unsigned long *linkmodes, unsigned long caps) +{ + if (caps & MAC_SYM_PAUSE) + __set_bit(ETHTOOL_LINK_MODE_Pause_BIT, linkmodes); + + if (caps & MAC_ASYM_PAUSE) + __set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, linkmodes); + + if (caps & MAC_10HD) { + __set_bit(ETHTOOL_LINK_MODE_10baseT_Half_BIT, linkmodes); + __set_bit(ETHTOOL_LINK_MODE_10baseT1S_Half_BIT, linkmodes); + __set_bit(ETHTOOL_LINK_MODE_10baseT1S_P2MP_Half_BIT, linkmodes); + } + + if (caps & MAC_10FD) { + __set_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT, linkmodes); + __set_bit(ETHTOOL_LINK_MODE_10baseT1L_Full_BIT, linkmodes); + __set_bit(ETHTOOL_LINK_MODE_10baseT1S_Full_BIT, linkmodes); + } + + if (caps & MAC_100HD) { + __set_bit(ETHTOOL_LINK_MODE_100baseT_Half_BIT, linkmodes); + __set_bit(ETHTOOL_LINK_MODE_100baseFX_Half_BIT, linkmodes); + } + + if (caps & MAC_100FD) { + __set_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT, linkmodes); + __set_bit(ETHTOOL_LINK_MODE_100baseT1_Full_BIT, linkmodes); + __set_bit(ETHTOOL_LINK_MODE_100baseFX_Full_BIT, linkmodes); + } + + if (caps & MAC_1000HD) + __set_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT, linkmodes); + + if (caps & MAC_1000FD) { + __set_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT, linkmodes); + __set_bit(ETHTOOL_LINK_MODE_1000baseKX_Full_BIT, linkmodes); + __set_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT, linkmodes); + __set_bit(ETHTOOL_LINK_MODE_1000baseT1_Full_BIT, linkmodes); + } + + if (caps & MAC_2500FD) { + __set_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, linkmodes); + __set_bit(ETHTOOL_LINK_MODE_2500baseX_Full_BIT, linkmodes); + } + + if (caps & MAC_5000FD) + __set_bit(ETHTOOL_LINK_MODE_5000baseT_Full_BIT, linkmodes); + + if (caps & MAC_10000FD) { + __set_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT, linkmodes); + __set_bit(ETHTOOL_LINK_MODE_10000baseKX4_Full_BIT, linkmodes); + __set_bit(ETHTOOL_LINK_MODE_10000baseKR_Full_BIT, linkmodes); + __set_bit(ETHTOOL_LINK_MODE_10000baseR_FEC_BIT, linkmodes); + __set_bit(ETHTOOL_LINK_MODE_10000baseCR_Full_BIT, linkmodes); + __set_bit(ETHTOOL_LINK_MODE_10000baseSR_Full_BIT, linkmodes); + __set_bit(ETHTOOL_LINK_MODE_10000baseLR_Full_BIT, linkmodes); + __set_bit(ETHTOOL_LINK_MODE_10000baseLRM_Full_BIT, linkmodes); + __set_bit(ETHTOOL_LINK_MODE_10000baseER_Full_BIT, linkmodes); + } + + if (caps & MAC_25000FD) { + __set_bit(ETHTOOL_LINK_MODE_25000baseCR_Full_BIT, linkmodes); + __set_bit(ETHTOOL_LINK_MODE_25000baseKR_Full_BIT, linkmodes); + __set_bit(ETHTOOL_LINK_MODE_25000baseSR_Full_BIT, linkmodes); + } + + if (caps & MAC_40000FD) { + __set_bit(ETHTOOL_LINK_MODE_40000baseKR4_Full_BIT, linkmodes); + __set_bit(ETHTOOL_LINK_MODE_40000baseCR4_Full_BIT, linkmodes); + __set_bit(ETHTOOL_LINK_MODE_40000baseSR4_Full_BIT, linkmodes); + __set_bit(ETHTOOL_LINK_MODE_40000baseLR4_Full_BIT, linkmodes); + } + + if (caps & MAC_50000FD) { + __set_bit(ETHTOOL_LINK_MODE_50000baseCR2_Full_BIT, linkmodes); + __set_bit(ETHTOOL_LINK_MODE_50000baseKR2_Full_BIT, linkmodes); + __set_bit(ETHTOOL_LINK_MODE_50000baseSR2_Full_BIT, linkmodes); + __set_bit(ETHTOOL_LINK_MODE_50000baseKR_Full_BIT, linkmodes); + __set_bit(ETHTOOL_LINK_MODE_50000baseSR_Full_BIT, linkmodes); + __set_bit(ETHTOOL_LINK_MODE_50000baseCR_Full_BIT, linkmodes); + __set_bit(ETHTOOL_LINK_MODE_50000baseLR_ER_FR_Full_BIT, + linkmodes); + __set_bit(ETHTOOL_LINK_MODE_50000baseDR_Full_BIT, linkmodes); + } + + if (caps & MAC_56000FD) { + __set_bit(ETHTOOL_LINK_MODE_56000baseKR4_Full_BIT, linkmodes); + __set_bit(ETHTOOL_LINK_MODE_56000baseCR4_Full_BIT, linkmodes); + __set_bit(ETHTOOL_LINK_MODE_56000baseSR4_Full_BIT, linkmodes); + __set_bit(ETHTOOL_LINK_MODE_56000baseLR4_Full_BIT, linkmodes); + } + + if (caps & MAC_100000FD) { + __set_bit(ETHTOOL_LINK_MODE_100000baseKR4_Full_BIT, linkmodes); + __set_bit(ETHTOOL_LINK_MODE_100000baseSR4_Full_BIT, linkmodes); + __set_bit(ETHTOOL_LINK_MODE_100000baseCR4_Full_BIT, linkmodes); + __set_bit(ETHTOOL_LINK_MODE_100000baseLR4_ER4_Full_BIT, + linkmodes); + __set_bit(ETHTOOL_LINK_MODE_100000baseKR2_Full_BIT, linkmodes); + __set_bit(ETHTOOL_LINK_MODE_100000baseSR2_Full_BIT, linkmodes); + __set_bit(ETHTOOL_LINK_MODE_100000baseCR2_Full_BIT, linkmodes); + __set_bit(ETHTOOL_LINK_MODE_100000baseLR2_ER2_FR2_Full_BIT, + linkmodes); + __set_bit(ETHTOOL_LINK_MODE_100000baseDR2_Full_BIT, linkmodes); + __set_bit(ETHTOOL_LINK_MODE_100000baseKR_Full_BIT, linkmodes); + __set_bit(ETHTOOL_LINK_MODE_100000baseSR_Full_BIT, linkmodes); + __set_bit(ETHTOOL_LINK_MODE_100000baseLR_ER_FR_Full_BIT, + linkmodes); + __set_bit(ETHTOOL_LINK_MODE_100000baseCR_Full_BIT, linkmodes); + __set_bit(ETHTOOL_LINK_MODE_100000baseDR_Full_BIT, linkmodes); + } + + if (caps & MAC_200000FD) { + __set_bit(ETHTOOL_LINK_MODE_200000baseKR4_Full_BIT, linkmodes); + __set_bit(ETHTOOL_LINK_MODE_200000baseSR4_Full_BIT, linkmodes); + __set_bit(ETHTOOL_LINK_MODE_200000baseLR4_ER4_FR4_Full_BIT, + linkmodes); + __set_bit(ETHTOOL_LINK_MODE_200000baseDR4_Full_BIT, linkmodes); + __set_bit(ETHTOOL_LINK_MODE_200000baseCR4_Full_BIT, linkmodes); + __set_bit(ETHTOOL_LINK_MODE_200000baseKR2_Full_BIT, linkmodes); + __set_bit(ETHTOOL_LINK_MODE_200000baseSR2_Full_BIT, linkmodes); + __set_bit(ETHTOOL_LINK_MODE_200000baseLR2_ER2_FR2_Full_BIT, + linkmodes); + __set_bit(ETHTOOL_LINK_MODE_200000baseDR2_Full_BIT, linkmodes); + __set_bit(ETHTOOL_LINK_MODE_200000baseCR2_Full_BIT, linkmodes); + } + + if (caps & MAC_400000FD) { + __set_bit(ETHTOOL_LINK_MODE_400000baseKR8_Full_BIT, linkmodes); + __set_bit(ETHTOOL_LINK_MODE_400000baseSR8_Full_BIT, linkmodes); + __set_bit(ETHTOOL_LINK_MODE_400000baseLR8_ER8_FR8_Full_BIT, + linkmodes); + __set_bit(ETHTOOL_LINK_MODE_400000baseDR8_Full_BIT, linkmodes); + __set_bit(ETHTOOL_LINK_MODE_400000baseCR8_Full_BIT, linkmodes); + __set_bit(ETHTOOL_LINK_MODE_400000baseKR4_Full_BIT, linkmodes); + __set_bit(ETHTOOL_LINK_MODE_400000baseSR4_Full_BIT, linkmodes); + __set_bit(ETHTOOL_LINK_MODE_400000baseLR4_ER4_FR4_Full_BIT, + linkmodes); + __set_bit(ETHTOOL_LINK_MODE_400000baseDR4_Full_BIT, linkmodes); + __set_bit(ETHTOOL_LINK_MODE_400000baseCR4_Full_BIT, linkmodes); + } +} +EXPORT_SYMBOL_GPL(phylink_caps_to_linkmodes); + +static struct { + unsigned long mask; + int speed; + unsigned int duplex; +} phylink_caps_params[] = { + { MAC_400000FD, SPEED_400000, DUPLEX_FULL }, + { MAC_200000FD, SPEED_200000, DUPLEX_FULL }, + { MAC_100000FD, SPEED_100000, DUPLEX_FULL }, + { MAC_56000FD, SPEED_56000, DUPLEX_FULL }, + { MAC_50000FD, SPEED_50000, DUPLEX_FULL }, + { MAC_40000FD, SPEED_40000, DUPLEX_FULL }, + { MAC_25000FD, SPEED_25000, DUPLEX_FULL }, + { MAC_20000FD, SPEED_20000, DUPLEX_FULL }, + { MAC_10000FD, SPEED_10000, DUPLEX_FULL }, + { MAC_5000FD, SPEED_5000, DUPLEX_FULL }, + { MAC_2500FD, SPEED_2500, DUPLEX_FULL }, + { MAC_1000FD, SPEED_1000, DUPLEX_FULL }, + { MAC_1000HD, SPEED_1000, DUPLEX_HALF }, + { MAC_100FD, SPEED_100, DUPLEX_FULL }, + { MAC_100HD, SPEED_100, DUPLEX_HALF }, + { MAC_10FD, SPEED_10, DUPLEX_FULL }, + { MAC_10HD, SPEED_10, DUPLEX_HALF }, +}; + +/** + * phylink_limit_mac_speed - limit the phylink_config to a maximum speed + * @config: pointer to a &struct phylink_config + * @max_speed: maximum speed + * + * Mask off MAC capabilities for speeds higher than the @max_speed parameter. + * Any further motifications of config.mac_capabilities will override this. + */ +void phylink_limit_mac_speed(struct phylink_config *config, u32 max_speed) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(phylink_caps_params) && + phylink_caps_params[i].speed > max_speed; i++) + config->mac_capabilities &= ~phylink_caps_params[i].mask; +} +EXPORT_SYMBOL_GPL(phylink_limit_mac_speed); + +/** + * phylink_cap_from_speed_duplex - Get mac capability from speed/duplex + * @speed: the speed to search for + * @duplex: the duplex to search for + * + * Find the mac capability for a given speed and duplex. + * + * Return: A mask with the mac capability patching @speed and @duplex, or 0 if + * there were no matches. + */ +static unsigned long phylink_cap_from_speed_duplex(int speed, + unsigned int duplex) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(phylink_caps_params); i++) { + if (speed == phylink_caps_params[i].speed && + duplex == phylink_caps_params[i].duplex) + return phylink_caps_params[i].mask; + } + + return 0; +} + +/** + * phylink_get_capabilities() - get capabilities for a given MAC + * @interface: phy interface mode defined by &typedef phy_interface_t + * @mac_capabilities: bitmask of MAC capabilities + * @rate_matching: type of rate matching being performed + * + * Get the MAC capabilities that are supported by the @interface mode and + * @mac_capabilities. + */ +unsigned long phylink_get_capabilities(phy_interface_t interface, + unsigned long mac_capabilities, + int rate_matching) +{ + int max_speed = phylink_interface_max_speed(interface); + unsigned long caps = MAC_SYM_PAUSE | MAC_ASYM_PAUSE; + unsigned long matched_caps = 0; + + switch (interface) { + case PHY_INTERFACE_MODE_USXGMII: + caps |= MAC_10000FD | MAC_5000FD | MAC_2500FD; + fallthrough; + + case PHY_INTERFACE_MODE_RGMII_TXID: + case PHY_INTERFACE_MODE_RGMII_RXID: + case PHY_INTERFACE_MODE_RGMII_ID: + case PHY_INTERFACE_MODE_RGMII: + case PHY_INTERFACE_MODE_PSGMII: + case PHY_INTERFACE_MODE_QSGMII: + case PHY_INTERFACE_MODE_QUSGMII: + case PHY_INTERFACE_MODE_SGMII: + case PHY_INTERFACE_MODE_GMII: + caps |= MAC_1000HD | MAC_1000FD; + fallthrough; + + case PHY_INTERFACE_MODE_REVRMII: + case PHY_INTERFACE_MODE_RMII: + case PHY_INTERFACE_MODE_SMII: + case PHY_INTERFACE_MODE_REVMII: + case PHY_INTERFACE_MODE_MII: + caps |= MAC_10HD | MAC_10FD; + fallthrough; + + case PHY_INTERFACE_MODE_100BASEX: + caps |= MAC_100HD | MAC_100FD; + break; + + case PHY_INTERFACE_MODE_TBI: + case PHY_INTERFACE_MODE_MOCA: + case PHY_INTERFACE_MODE_RTBI: + case PHY_INTERFACE_MODE_1000BASEX: + caps |= MAC_1000HD; + fallthrough; + case PHY_INTERFACE_MODE_1000BASEKX: + case PHY_INTERFACE_MODE_TRGMII: + caps |= MAC_1000FD; + break; + + case PHY_INTERFACE_MODE_2500BASEX: + caps |= MAC_2500FD; + break; + + case PHY_INTERFACE_MODE_5GBASER: + caps |= MAC_5000FD; + break; + + case PHY_INTERFACE_MODE_XGMII: + case PHY_INTERFACE_MODE_RXAUI: + case PHY_INTERFACE_MODE_XAUI: + case PHY_INTERFACE_MODE_10GBASER: + case PHY_INTERFACE_MODE_10GKR: + caps |= MAC_10000FD; + break; + + case PHY_INTERFACE_MODE_25GBASER: + caps |= MAC_25000FD; + break; + + case PHY_INTERFACE_MODE_XLGMII: + caps |= MAC_40000FD; + break; + + case PHY_INTERFACE_MODE_INTERNAL: + caps |= ~0; + break; + + case PHY_INTERFACE_MODE_NA: + case PHY_INTERFACE_MODE_MAX: + break; + } + + switch (rate_matching) { + case RATE_MATCH_OPEN_LOOP: + /* TODO */ + fallthrough; + case RATE_MATCH_NONE: + matched_caps = 0; + break; + case RATE_MATCH_PAUSE: { + /* The MAC must support asymmetric pause towards the local + * device for this. We could allow just symmetric pause, but + * then we might have to renegotiate if the link partner + * doesn't support pause. This is because there's no way to + * accept pause frames without transmitting them if we only + * support symmetric pause. + */ + if (!(mac_capabilities & MAC_SYM_PAUSE) || + !(mac_capabilities & MAC_ASYM_PAUSE)) + break; + + /* We can't adapt if the MAC doesn't support the interface's + * max speed at full duplex. + */ + if (mac_capabilities & + phylink_cap_from_speed_duplex(max_speed, DUPLEX_FULL)) { + /* Although a duplex-matching phy might exist, we + * conservatively remove these modes because the MAC + * will not be aware of the half-duplex nature of the + * link. + */ + matched_caps = GENMASK(__fls(caps), __fls(MAC_10HD)); + matched_caps &= ~(MAC_1000HD | MAC_100HD | MAC_10HD); + } + break; + } + case RATE_MATCH_CRS: + /* The MAC must support half duplex at the interface's max + * speed. + */ + if (mac_capabilities & + phylink_cap_from_speed_duplex(max_speed, DUPLEX_HALF)) { + matched_caps = GENMASK(__fls(caps), __fls(MAC_10HD)); + matched_caps &= mac_capabilities; + } + break; + } + + return (caps & mac_capabilities) | matched_caps; +} +EXPORT_SYMBOL_GPL(phylink_get_capabilities); + +/** + * phylink_validate_mask_caps() - Restrict link modes based on caps + * @supported: ethtool bitmask for supported link modes. + * @state: pointer to a &struct phylink_link_state. + * @mac_capabilities: bitmask of MAC capabilities + * + * Calculate the supported link modes based on @mac_capabilities, and restrict + * @supported and @state based on that. Use this function if your capabiliies + * aren't constant, such as if they vary depending on the interface. + */ +void phylink_validate_mask_caps(unsigned long *supported, + struct phylink_link_state *state, + unsigned long mac_capabilities) +{ + __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, }; + unsigned long caps; + + phylink_set_port_modes(mask); + phylink_set(mask, Autoneg); + caps = phylink_get_capabilities(state->interface, mac_capabilities, + state->rate_matching); + phylink_caps_to_linkmodes(mask, caps); + + linkmode_and(supported, supported, mask); + linkmode_and(state->advertising, state->advertising, mask); +} +EXPORT_SYMBOL_GPL(phylink_validate_mask_caps); + +/** + * phylink_generic_validate() - generic validate() callback implementation + * @config: a pointer to a &struct phylink_config. + * @supported: ethtool bitmask for supported link modes. + * @state: a pointer to a &struct phylink_link_state. + * + * Generic implementation of the validate() callback that MAC drivers can + * use when they pass the range of supported interfaces and MAC capabilities. + */ +void phylink_generic_validate(struct phylink_config *config, + unsigned long *supported, + struct phylink_link_state *state) +{ + phylink_validate_mask_caps(supported, state, config->mac_capabilities); +} +EXPORT_SYMBOL_GPL(phylink_generic_validate); + +static int phylink_validate_mac_and_pcs(struct phylink *pl, + unsigned long *supported, + struct phylink_link_state *state) +{ + struct phylink_pcs *pcs; + int ret; + + /* Get the PCS for this interface mode */ + if (pl->using_mac_select_pcs) { + pcs = pl->mac_ops->mac_select_pcs(pl->config, state->interface); + if (IS_ERR(pcs)) + return PTR_ERR(pcs); + } else { + pcs = pl->pcs; + } + + if (pcs) { + /* The PCS, if present, must be setup before phylink_create() + * has been called. If the ops is not initialised, print an + * error and backtrace rather than oopsing the kernel. + */ + if (!pcs->ops) { + phylink_err(pl, "interface %s: uninitialised PCS\n", + phy_modes(state->interface)); + dump_stack(); + return -EINVAL; + } + + /* Validate the link parameters with the PCS */ + if (pcs->ops->pcs_validate) { + ret = pcs->ops->pcs_validate(pcs, supported, state); + if (ret < 0 || phylink_is_empty_linkmode(supported)) + return -EINVAL; + + /* Ensure the advertising mask is a subset of the + * supported mask. + */ + linkmode_and(state->advertising, state->advertising, + supported); + } + } + + /* Then validate the link parameters with the MAC */ + if (pl->mac_ops->validate) + pl->mac_ops->validate(pl->config, supported, state); + else + phylink_generic_validate(pl->config, supported, state); + + return phylink_is_empty_linkmode(supported) ? -EINVAL : 0; +} + +static int phylink_validate_mask(struct phylink *pl, unsigned long *supported, + struct phylink_link_state *state, + const unsigned long *interfaces) +{ + __ETHTOOL_DECLARE_LINK_MODE_MASK(all_adv) = { 0, }; + __ETHTOOL_DECLARE_LINK_MODE_MASK(all_s) = { 0, }; + __ETHTOOL_DECLARE_LINK_MODE_MASK(s); + struct phylink_link_state t; + int intf; + + for (intf = 0; intf < PHY_INTERFACE_MODE_MAX; intf++) { + if (test_bit(intf, interfaces)) { + linkmode_copy(s, supported); + + t = *state; + t.interface = intf; + if (!phylink_validate_mac_and_pcs(pl, s, &t)) { + linkmode_or(all_s, all_s, s); + linkmode_or(all_adv, all_adv, t.advertising); + } + } + } + + linkmode_copy(supported, all_s); + linkmode_copy(state->advertising, all_adv); + + return phylink_is_empty_linkmode(supported) ? -EINVAL : 0; +} + +static int phylink_validate(struct phylink *pl, unsigned long *supported, + struct phylink_link_state *state) +{ + const unsigned long *interfaces = pl->config->supported_interfaces; + + if (state->interface == PHY_INTERFACE_MODE_NA) + return phylink_validate_mask(pl, supported, state, interfaces); + + if (!test_bit(state->interface, interfaces)) + return -EINVAL; + + return phylink_validate_mac_and_pcs(pl, supported, state); +} + +static int phylink_parse_fixedlink(struct phylink *pl, + const struct fwnode_handle *fwnode) +{ + struct fwnode_handle *fixed_node; + bool pause, asym_pause, autoneg; + const struct phy_setting *s; + struct gpio_desc *desc; + u32 speed; + int ret; + + fixed_node = fwnode_get_named_child_node(fwnode, "fixed-link"); + if (fixed_node) { + ret = fwnode_property_read_u32(fixed_node, "speed", &speed); + + pl->link_config.speed = speed; + pl->link_config.duplex = DUPLEX_HALF; + + if (fwnode_property_read_bool(fixed_node, "full-duplex")) + pl->link_config.duplex = DUPLEX_FULL; + + /* We treat the "pause" and "asym-pause" terminology as + * defining the link partner's ability. + */ + if (fwnode_property_read_bool(fixed_node, "pause")) + __set_bit(ETHTOOL_LINK_MODE_Pause_BIT, + pl->link_config.lp_advertising); + if (fwnode_property_read_bool(fixed_node, "asym-pause")) + __set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, + pl->link_config.lp_advertising); + + if (ret == 0) { + desc = fwnode_gpiod_get_index(fixed_node, "link", 0, + GPIOD_IN, "?"); + + if (!IS_ERR(desc)) + pl->link_gpio = desc; + else if (desc == ERR_PTR(-EPROBE_DEFER)) + ret = -EPROBE_DEFER; + } + fwnode_handle_put(fixed_node); + + if (ret) + return ret; + } else { + u32 prop[5]; + + ret = fwnode_property_read_u32_array(fwnode, "fixed-link", + NULL, 0); + if (ret != ARRAY_SIZE(prop)) { + phylink_err(pl, "broken fixed-link?\n"); + return -EINVAL; + } + + ret = fwnode_property_read_u32_array(fwnode, "fixed-link", + prop, ARRAY_SIZE(prop)); + if (!ret) { + pl->link_config.duplex = prop[1] ? + DUPLEX_FULL : DUPLEX_HALF; + pl->link_config.speed = prop[2]; + if (prop[3]) + __set_bit(ETHTOOL_LINK_MODE_Pause_BIT, + pl->link_config.lp_advertising); + if (prop[4]) + __set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, + pl->link_config.lp_advertising); + } + } + + if (pl->link_config.speed > SPEED_1000 && + pl->link_config.duplex != DUPLEX_FULL) + phylink_warn(pl, "fixed link specifies half duplex for %dMbps link?\n", + pl->link_config.speed); + + bitmap_fill(pl->supported, __ETHTOOL_LINK_MODE_MASK_NBITS); + linkmode_copy(pl->link_config.advertising, pl->supported); + phylink_validate(pl, pl->supported, &pl->link_config); + + pause = phylink_test(pl->supported, Pause); + asym_pause = phylink_test(pl->supported, Asym_Pause); + autoneg = phylink_test(pl->supported, Autoneg); + s = phy_lookup_setting(pl->link_config.speed, pl->link_config.duplex, + pl->supported, true); + linkmode_zero(pl->supported); + phylink_set(pl->supported, MII); + + if (pause) + phylink_set(pl->supported, Pause); + + if (asym_pause) + phylink_set(pl->supported, Asym_Pause); + + if (autoneg) + phylink_set(pl->supported, Autoneg); + + if (s) { + __set_bit(s->bit, pl->supported); + __set_bit(s->bit, pl->link_config.lp_advertising); + } else { + phylink_warn(pl, "fixed link %s duplex %dMbps not recognised\n", + pl->link_config.duplex == DUPLEX_FULL ? "full" : "half", + pl->link_config.speed); + } + + linkmode_and(pl->link_config.advertising, pl->link_config.advertising, + pl->supported); + + pl->link_config.link = 1; + pl->link_config.an_complete = 1; + + return 0; +} + +static int phylink_parse_mode(struct phylink *pl, + const struct fwnode_handle *fwnode) +{ + struct fwnode_handle *dn; + const char *managed; + + dn = fwnode_get_named_child_node(fwnode, "fixed-link"); + if (dn || fwnode_property_present(fwnode, "fixed-link")) + pl->cfg_link_an_mode = MLO_AN_FIXED; + fwnode_handle_put(dn); + + if ((fwnode_property_read_string(fwnode, "managed", &managed) == 0 && + strcmp(managed, "in-band-status") == 0) || + pl->config->ovr_an_inband) { + if (pl->cfg_link_an_mode == MLO_AN_FIXED) { + phylink_err(pl, + "can't use both fixed-link and in-band-status\n"); + return -EINVAL; + } + + linkmode_zero(pl->supported); + phylink_set(pl->supported, MII); + phylink_set(pl->supported, Autoneg); + phylink_set(pl->supported, Asym_Pause); + phylink_set(pl->supported, Pause); + pl->cfg_link_an_mode = MLO_AN_INBAND; + + switch (pl->link_config.interface) { + case PHY_INTERFACE_MODE_SGMII: + case PHY_INTERFACE_MODE_PSGMII: + case PHY_INTERFACE_MODE_QSGMII: + case PHY_INTERFACE_MODE_QUSGMII: + case PHY_INTERFACE_MODE_RGMII: + case PHY_INTERFACE_MODE_RGMII_ID: + case PHY_INTERFACE_MODE_RGMII_RXID: + case PHY_INTERFACE_MODE_RGMII_TXID: + case PHY_INTERFACE_MODE_RTBI: + phylink_set(pl->supported, 10baseT_Half); + phylink_set(pl->supported, 10baseT_Full); + phylink_set(pl->supported, 100baseT_Half); + phylink_set(pl->supported, 100baseT_Full); + phylink_set(pl->supported, 1000baseT_Half); + phylink_set(pl->supported, 1000baseT_Full); + break; + + case PHY_INTERFACE_MODE_1000BASEX: + phylink_set(pl->supported, 1000baseX_Full); + break; + + case PHY_INTERFACE_MODE_2500BASEX: + phylink_set(pl->supported, 2500baseX_Full); + break; + + case PHY_INTERFACE_MODE_5GBASER: + phylink_set(pl->supported, 5000baseT_Full); + break; + + case PHY_INTERFACE_MODE_25GBASER: + phylink_set(pl->supported, 25000baseCR_Full); + phylink_set(pl->supported, 25000baseKR_Full); + phylink_set(pl->supported, 25000baseSR_Full); + fallthrough; + case PHY_INTERFACE_MODE_USXGMII: + case PHY_INTERFACE_MODE_10GKR: + case PHY_INTERFACE_MODE_10GBASER: + phylink_set(pl->supported, 10baseT_Half); + phylink_set(pl->supported, 10baseT_Full); + phylink_set(pl->supported, 100baseT_Half); + phylink_set(pl->supported, 100baseT_Full); + phylink_set(pl->supported, 1000baseT_Half); + phylink_set(pl->supported, 1000baseT_Full); + phylink_set(pl->supported, 1000baseX_Full); + phylink_set(pl->supported, 1000baseKX_Full); + phylink_set(pl->supported, 2500baseT_Full); + phylink_set(pl->supported, 2500baseX_Full); + phylink_set(pl->supported, 5000baseT_Full); + phylink_set(pl->supported, 10000baseT_Full); + phylink_set(pl->supported, 10000baseKR_Full); + phylink_set(pl->supported, 10000baseKX4_Full); + phylink_set(pl->supported, 10000baseCR_Full); + phylink_set(pl->supported, 10000baseSR_Full); + phylink_set(pl->supported, 10000baseLR_Full); + phylink_set(pl->supported, 10000baseLRM_Full); + phylink_set(pl->supported, 10000baseER_Full); + break; + + case PHY_INTERFACE_MODE_XLGMII: + phylink_set(pl->supported, 25000baseCR_Full); + phylink_set(pl->supported, 25000baseKR_Full); + phylink_set(pl->supported, 25000baseSR_Full); + phylink_set(pl->supported, 40000baseKR4_Full); + phylink_set(pl->supported, 40000baseCR4_Full); + phylink_set(pl->supported, 40000baseSR4_Full); + phylink_set(pl->supported, 40000baseLR4_Full); + phylink_set(pl->supported, 50000baseCR2_Full); + phylink_set(pl->supported, 50000baseKR2_Full); + phylink_set(pl->supported, 50000baseSR2_Full); + phylink_set(pl->supported, 50000baseKR_Full); + phylink_set(pl->supported, 50000baseSR_Full); + phylink_set(pl->supported, 50000baseCR_Full); + phylink_set(pl->supported, 50000baseLR_ER_FR_Full); + phylink_set(pl->supported, 50000baseDR_Full); + phylink_set(pl->supported, 100000baseKR4_Full); + phylink_set(pl->supported, 100000baseSR4_Full); + phylink_set(pl->supported, 100000baseCR4_Full); + phylink_set(pl->supported, 100000baseLR4_ER4_Full); + phylink_set(pl->supported, 100000baseKR2_Full); + phylink_set(pl->supported, 100000baseSR2_Full); + phylink_set(pl->supported, 100000baseCR2_Full); + phylink_set(pl->supported, 100000baseLR2_ER2_FR2_Full); + phylink_set(pl->supported, 100000baseDR2_Full); + break; + + default: + phylink_err(pl, + "incorrect link mode %s for in-band status\n", + phy_modes(pl->link_config.interface)); + return -EINVAL; + } + + linkmode_copy(pl->link_config.advertising, pl->supported); + + if (phylink_validate(pl, pl->supported, &pl->link_config)) { + phylink_err(pl, + "failed to validate link configuration for in-band status\n"); + return -EINVAL; + } + } + + return 0; +} + +static void phylink_apply_manual_flow(struct phylink *pl, + struct phylink_link_state *state) +{ + /* If autoneg is disabled, pause AN is also disabled */ + if (!linkmode_test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, + state->advertising)) + state->pause &= ~MLO_PAUSE_AN; + + /* Manual configuration of pause modes */ + if (!(pl->link_config.pause & MLO_PAUSE_AN)) + state->pause = pl->link_config.pause; +} + +static void phylink_resolve_an_pause(struct phylink_link_state *state) +{ + bool tx_pause, rx_pause; + + if (state->duplex == DUPLEX_FULL) { + linkmode_resolve_pause(state->advertising, + state->lp_advertising, + &tx_pause, &rx_pause); + if (tx_pause) + state->pause |= MLO_PAUSE_TX; + if (rx_pause) + state->pause |= MLO_PAUSE_RX; + } +} + +static void phylink_pcs_pre_config(struct phylink_pcs *pcs, + phy_interface_t interface) +{ + if (pcs && pcs->ops->pcs_pre_config) + pcs->ops->pcs_pre_config(pcs, interface); +} + +static int phylink_pcs_post_config(struct phylink_pcs *pcs, + phy_interface_t interface) +{ + int err = 0; + + if (pcs && pcs->ops->pcs_post_config) + err = pcs->ops->pcs_post_config(pcs, interface); + + return err; +} + +static void phylink_pcs_disable(struct phylink_pcs *pcs) +{ + if (pcs && pcs->ops->pcs_disable) + pcs->ops->pcs_disable(pcs); +} + +static int phylink_pcs_enable(struct phylink_pcs *pcs) +{ + int err = 0; + + if (pcs && pcs->ops->pcs_enable) + err = pcs->ops->pcs_enable(pcs); + + return err; +} + +static int phylink_pcs_config(struct phylink_pcs *pcs, unsigned int neg_mode, + const struct phylink_link_state *state, + bool permit_pause_to_mac) +{ + if (!pcs) + return 0; + + return pcs->ops->pcs_config(pcs, neg_mode, state->interface, + state->advertising, permit_pause_to_mac); +} + +static void phylink_pcs_link_up(struct phylink_pcs *pcs, unsigned int neg_mode, + phy_interface_t interface, int speed, + int duplex) +{ + if (pcs && pcs->ops->pcs_link_up) + pcs->ops->pcs_link_up(pcs, neg_mode, interface, speed, duplex); +} + +static void phylink_pcs_poll_stop(struct phylink *pl) +{ + if (pl->cfg_link_an_mode == MLO_AN_INBAND) + del_timer(&pl->link_poll); +} + +static void phylink_pcs_poll_start(struct phylink *pl) +{ + if (pl->pcs && pl->pcs->poll && pl->cfg_link_an_mode == MLO_AN_INBAND) + mod_timer(&pl->link_poll, jiffies + HZ); +} + +static void phylink_mac_config(struct phylink *pl, + const struct phylink_link_state *state) +{ + struct phylink_link_state st = *state; + + /* Stop drivers incorrectly using these */ + linkmode_zero(st.lp_advertising); + st.speed = SPEED_UNKNOWN; + st.duplex = DUPLEX_UNKNOWN; + st.an_complete = false; + st.link = false; + + phylink_dbg(pl, + "%s: mode=%s/%s/%s adv=%*pb pause=%02x\n", + __func__, phylink_an_mode_str(pl->cur_link_an_mode), + phy_modes(st.interface), + phy_rate_matching_to_str(st.rate_matching), + __ETHTOOL_LINK_MODE_MASK_NBITS, st.advertising, + st.pause); + + pl->mac_ops->mac_config(pl->config, pl->cur_link_an_mode, &st); +} + +static void phylink_pcs_an_restart(struct phylink *pl) +{ + if (pl->pcs && linkmode_test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, + pl->link_config.advertising) && + phy_interface_mode_is_8023z(pl->link_config.interface) && + phylink_autoneg_inband(pl->cur_link_an_mode)) + pl->pcs->ops->pcs_an_restart(pl->pcs); +} + +static void phylink_major_config(struct phylink *pl, bool restart, + const struct phylink_link_state *state) +{ + struct phylink_pcs *pcs = NULL; + bool pcs_changed = false; + unsigned int rate_kbd; + unsigned int neg_mode; + int err; + + phylink_dbg(pl, "major config %s\n", phy_modes(state->interface)); + + pl->pcs_neg_mode = phylink_pcs_neg_mode(pl->cur_link_an_mode, + state->interface, + state->advertising); + + if (pl->using_mac_select_pcs) { + pcs = pl->mac_ops->mac_select_pcs(pl->config, state->interface); + if (IS_ERR(pcs)) { + phylink_err(pl, + "mac_select_pcs unexpectedly failed: %pe\n", + pcs); + return; + } + + pcs_changed = pcs && pl->pcs != pcs; + } + + phylink_pcs_poll_stop(pl); + + if (pl->mac_ops->mac_prepare) { + err = pl->mac_ops->mac_prepare(pl->config, pl->cur_link_an_mode, + state->interface); + if (err < 0) { + phylink_err(pl, "mac_prepare failed: %pe\n", + ERR_PTR(err)); + return; + } + } + + /* If we have a new PCS, switch to the new PCS after preparing the MAC + * for the change. + */ + if (pcs_changed) { + phylink_pcs_disable(pl->pcs); + + if (pl->pcs) + pl->pcs->phylink = NULL; + + pcs->phylink = pl; + + pl->pcs = pcs; + } + + if (pl->pcs) + phylink_pcs_pre_config(pl->pcs, state->interface); + + phylink_mac_config(pl, state); + + if (pl->pcs) + phylink_pcs_post_config(pl->pcs, state->interface); + + if (pl->pcs_state == PCS_STATE_STARTING || pcs_changed) + phylink_pcs_enable(pl->pcs); + + neg_mode = pl->cur_link_an_mode; + if (pl->pcs && pl->pcs->neg_mode) + neg_mode = pl->pcs_neg_mode; + + err = phylink_pcs_config(pl->pcs, neg_mode, state, + !!(pl->link_config.pause & MLO_PAUSE_AN)); + if (err < 0) + phylink_err(pl, "pcs_config failed: %pe\n", + ERR_PTR(err)); + else if (err > 0) + restart = true; + + if (restart) + phylink_pcs_an_restart(pl); + + if (pl->mac_ops->mac_finish) { + err = pl->mac_ops->mac_finish(pl->config, pl->cur_link_an_mode, + state->interface); + if (err < 0) + phylink_err(pl, "mac_finish failed: %pe\n", + ERR_PTR(err)); + } + + if (pl->sfp_bus) { + rate_kbd = phylink_interface_signal_rate(state->interface); + if (rate_kbd) + sfp_upstream_set_signal_rate(pl->sfp_bus, rate_kbd); + } + + phylink_pcs_poll_start(pl); +} + +/* + * Reconfigure for a change of inband advertisement. + * If we have a separate PCS, we only need to call its pcs_config() method, + * and then restart AN if it indicates something changed. Otherwise, we do + * the full MAC reconfiguration. + */ +static int phylink_change_inband_advert(struct phylink *pl) +{ + unsigned int neg_mode; + int ret; + + if (test_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state)) + return 0; + + phylink_dbg(pl, "%s: mode=%s/%s adv=%*pb pause=%02x\n", __func__, + phylink_an_mode_str(pl->cur_link_an_mode), + phy_modes(pl->link_config.interface), + __ETHTOOL_LINK_MODE_MASK_NBITS, pl->link_config.advertising, + pl->link_config.pause); + + /* Recompute the PCS neg mode */ + pl->pcs_neg_mode = phylink_pcs_neg_mode(pl->cur_link_an_mode, + pl->link_config.interface, + pl->link_config.advertising); + + neg_mode = pl->cur_link_an_mode; + if (pl->pcs->neg_mode) + neg_mode = pl->pcs_neg_mode; + + /* Modern PCS-based method; update the advert at the PCS, and + * restart negotiation if the pcs_config() helper indicates that + * the programmed advertisement has changed. + */ + ret = phylink_pcs_config(pl->pcs, neg_mode, &pl->link_config, + !!(pl->link_config.pause & MLO_PAUSE_AN)); + if (ret < 0) + return ret; + + if (ret > 0) + phylink_pcs_an_restart(pl); + + return 0; +} + +static void phylink_mac_pcs_get_state(struct phylink *pl, + struct phylink_link_state *state) +{ + linkmode_copy(state->advertising, pl->link_config.advertising); + linkmode_zero(state->lp_advertising); + state->interface = pl->link_config.interface; + state->rate_matching = pl->link_config.rate_matching; + if (linkmode_test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, + state->advertising)) { + state->speed = SPEED_UNKNOWN; + state->duplex = DUPLEX_UNKNOWN; + state->pause = MLO_PAUSE_NONE; + } else { + state->speed = pl->link_config.speed; + state->duplex = pl->link_config.duplex; + state->pause = pl->link_config.pause; + } + state->an_complete = 0; + state->link = 1; + + if (pl->pcs) + pl->pcs->ops->pcs_get_state(pl->pcs, state); + else + state->link = 0; +} + +/* The fixed state is... fixed except for the link state, + * which may be determined by a GPIO or a callback. + */ +static void phylink_get_fixed_state(struct phylink *pl, + struct phylink_link_state *state) +{ + *state = pl->link_config; + if (pl->config->get_fixed_state) + pl->config->get_fixed_state(pl->config, state); + else if (pl->link_gpio) + state->link = !!gpiod_get_value_cansleep(pl->link_gpio); + + state->pause = MLO_PAUSE_NONE; + phylink_resolve_an_pause(state); +} + +static void phylink_mac_initial_config(struct phylink *pl, bool force_restart) +{ + struct phylink_link_state link_state; + + switch (pl->cur_link_an_mode) { + case MLO_AN_PHY: + link_state = pl->phy_state; + break; + + case MLO_AN_FIXED: + phylink_get_fixed_state(pl, &link_state); + break; + + case MLO_AN_INBAND: + link_state = pl->link_config; + if (link_state.interface == PHY_INTERFACE_MODE_SGMII) + link_state.pause = MLO_PAUSE_NONE; + break; + + default: /* can't happen */ + return; + } + + link_state.link = false; + + phylink_apply_manual_flow(pl, &link_state); + phylink_major_config(pl, force_restart, &link_state); +} + +static const char *phylink_pause_to_str(int pause) +{ + switch (pause & MLO_PAUSE_TXRX_MASK) { + case MLO_PAUSE_TX | MLO_PAUSE_RX: + return "rx/tx"; + case MLO_PAUSE_TX: + return "tx"; + case MLO_PAUSE_RX: + return "rx"; + default: + return "off"; + } +} + +static void phylink_link_up(struct phylink *pl, + struct phylink_link_state link_state) +{ + struct net_device *ndev = pl->netdev; + unsigned int neg_mode; + int speed, duplex; + bool rx_pause; + + speed = link_state.speed; + duplex = link_state.duplex; + rx_pause = !!(link_state.pause & MLO_PAUSE_RX); + + switch (link_state.rate_matching) { + case RATE_MATCH_PAUSE: + /* The PHY is doing rate matchion from the media rate (in + * the link_state) to the interface speed, and will send + * pause frames to the MAC to limit its transmission speed. + */ + speed = phylink_interface_max_speed(link_state.interface); + duplex = DUPLEX_FULL; + rx_pause = true; + break; + + case RATE_MATCH_CRS: + /* The PHY is doing rate matchion from the media rate (in + * the link_state) to the interface speed, and will cause + * collisions to the MAC to limit its transmission speed. + */ + speed = phylink_interface_max_speed(link_state.interface); + duplex = DUPLEX_HALF; + break; + } + + pl->cur_interface = link_state.interface; + + neg_mode = pl->cur_link_an_mode; + if (pl->pcs && pl->pcs->neg_mode) + neg_mode = pl->pcs_neg_mode; + + phylink_pcs_link_up(pl->pcs, neg_mode, pl->cur_interface, speed, + duplex); + + pl->mac_ops->mac_link_up(pl->config, pl->phydev, pl->cur_link_an_mode, + pl->cur_interface, speed, duplex, + !!(link_state.pause & MLO_PAUSE_TX), rx_pause); + + if (ndev) + netif_carrier_on(ndev); + + phylink_info(pl, + "Link is Up - %s/%s - flow control %s\n", + phy_speed_to_str(link_state.speed), + phy_duplex_to_str(link_state.duplex), + phylink_pause_to_str(link_state.pause)); +} + +static void phylink_link_down(struct phylink *pl) +{ + struct net_device *ndev = pl->netdev; + + if (ndev) + netif_carrier_off(ndev); + pl->mac_ops->mac_link_down(pl->config, pl->cur_link_an_mode, + pl->cur_interface); + phylink_info(pl, "Link is Down\n"); +} + +static void phylink_resolve(struct work_struct *w) +{ + struct phylink *pl = container_of(w, struct phylink, resolve); + struct phylink_link_state link_state; + struct net_device *ndev = pl->netdev; + bool mac_config = false; + bool retrigger = false; + bool cur_link_state; + + mutex_lock(&pl->state_mutex); + if (pl->netdev) + cur_link_state = netif_carrier_ok(ndev); + else + cur_link_state = pl->old_link_state; + + if (pl->phylink_disable_state) { + pl->mac_link_dropped = false; + link_state.link = false; + } else if (pl->mac_link_dropped) { + link_state.link = false; + retrigger = true; + } else { + switch (pl->cur_link_an_mode) { + case MLO_AN_PHY: + link_state = pl->phy_state; + phylink_apply_manual_flow(pl, &link_state); + mac_config = link_state.link; + break; + + case MLO_AN_FIXED: + phylink_get_fixed_state(pl, &link_state); + mac_config = link_state.link; + break; + + case MLO_AN_INBAND: + phylink_mac_pcs_get_state(pl, &link_state); + + /* The PCS may have a latching link-fail indicator. + * If the link was up, bring the link down and + * re-trigger the resolve. Otherwise, re-read the + * PCS state to get the current status of the link. + */ + if (!link_state.link) { + if (cur_link_state) + retrigger = true; + else + phylink_mac_pcs_get_state(pl, + &link_state); + } + + /* If we have a phy, the "up" state is the union of + * both the PHY and the MAC + */ + if (pl->phydev) + link_state.link &= pl->phy_state.link; + + /* Only update if the PHY link is up */ + if (pl->phydev && pl->phy_state.link) { + /* If the interface has changed, force a + * link down event if the link isn't already + * down, and re-resolve. + */ + if (link_state.interface != + pl->phy_state.interface) { + retrigger = true; + link_state.link = false; + } + link_state.interface = pl->phy_state.interface; + + /* If we are doing rate matching, then the + * link speed/duplex comes from the PHY + */ + if (pl->phy_state.rate_matching) { + link_state.rate_matching = + pl->phy_state.rate_matching; + link_state.speed = pl->phy_state.speed; + link_state.duplex = + pl->phy_state.duplex; + } + + /* If we have a PHY, we need to update with + * the PHY flow control bits. + */ + link_state.pause = pl->phy_state.pause; + mac_config = true; + } + phylink_apply_manual_flow(pl, &link_state); + break; + } + } + + if (mac_config) { + if (link_state.interface != pl->link_config.interface) { + /* The interface has changed, force the link down and + * then reconfigure. + */ + if (cur_link_state) { + phylink_link_down(pl); + cur_link_state = false; + } + phylink_major_config(pl, false, &link_state); + pl->link_config.interface = link_state.interface; + } + } + + if (link_state.link != cur_link_state) { + pl->old_link_state = link_state.link; + if (!link_state.link) + phylink_link_down(pl); + else + phylink_link_up(pl, link_state); + } + if (!link_state.link && retrigger) { + pl->mac_link_dropped = false; + queue_work(system_power_efficient_wq, &pl->resolve); + } + mutex_unlock(&pl->state_mutex); +} + +static void phylink_run_resolve(struct phylink *pl) +{ + if (!pl->phylink_disable_state) + queue_work(system_power_efficient_wq, &pl->resolve); +} + +static void phylink_run_resolve_and_disable(struct phylink *pl, int bit) +{ + unsigned long state = pl->phylink_disable_state; + + set_bit(bit, &pl->phylink_disable_state); + if (state == 0) { + queue_work(system_power_efficient_wq, &pl->resolve); + flush_work(&pl->resolve); + } +} + +static void phylink_enable_and_run_resolve(struct phylink *pl, int bit) +{ + clear_bit(bit, &pl->phylink_disable_state); + phylink_run_resolve(pl); +} + +static void phylink_fixed_poll(struct timer_list *t) +{ + struct phylink *pl = container_of(t, struct phylink, link_poll); + + mod_timer(t, jiffies + HZ); + + phylink_run_resolve(pl); +} + +static const struct sfp_upstream_ops sfp_phylink_ops; + +static int phylink_register_sfp(struct phylink *pl, + const struct fwnode_handle *fwnode) +{ + struct sfp_bus *bus; + int ret; + + if (!fwnode) + return 0; + + bus = sfp_bus_find_fwnode(fwnode); + if (IS_ERR(bus)) { + phylink_err(pl, "unable to attach SFP bus: %pe\n", bus); + return PTR_ERR(bus); + } + + pl->sfp_bus = bus; + + ret = sfp_bus_add_upstream(bus, pl, &sfp_phylink_ops); + sfp_bus_put(bus); + + return ret; +} + +/** + * phylink_create() - create a phylink instance + * @config: a pointer to the target &struct phylink_config + * @fwnode: a pointer to a &struct fwnode_handle describing the network + * interface + * @iface: the desired link mode defined by &typedef phy_interface_t + * @mac_ops: a pointer to a &struct phylink_mac_ops for the MAC. + * + * Create a new phylink instance, and parse the link parameters found in @np. + * This will parse in-band modes, fixed-link or SFP configuration. + * + * Note: the rtnl lock must not be held when calling this function. + * + * Returns a pointer to a &struct phylink, or an error-pointer value. Users + * must use IS_ERR() to check for errors from this function. + */ +struct phylink *phylink_create(struct phylink_config *config, + const struct fwnode_handle *fwnode, + phy_interface_t iface, + const struct phylink_mac_ops *mac_ops) +{ + bool using_mac_select_pcs = false; + struct phylink *pl; + int ret; + + /* Validate the supplied configuration */ + if (phy_interface_empty(config->supported_interfaces)) { + dev_err(config->dev, + "phylink: error: empty supported_interfaces\n"); + return ERR_PTR(-EINVAL); + } + + if (mac_ops->mac_select_pcs && + mac_ops->mac_select_pcs(config, PHY_INTERFACE_MODE_NA) != + ERR_PTR(-EOPNOTSUPP)) + using_mac_select_pcs = true; + + pl = kzalloc(sizeof(*pl), GFP_KERNEL); + if (!pl) + return ERR_PTR(-ENOMEM); + + mutex_init(&pl->state_mutex); + INIT_WORK(&pl->resolve, phylink_resolve); + + pl->config = config; + if (config->type == PHYLINK_NETDEV) { + pl->netdev = to_net_dev(config->dev); + netif_carrier_off(pl->netdev); + } else if (config->type == PHYLINK_DEV) { + pl->dev = config->dev; + } else { + kfree(pl); + return ERR_PTR(-EINVAL); + } + + pl->using_mac_select_pcs = using_mac_select_pcs; + pl->phy_state.interface = iface; + pl->link_interface = iface; + if (iface == PHY_INTERFACE_MODE_MOCA) + pl->link_port = PORT_BNC; + else + pl->link_port = PORT_MII; + pl->link_config.interface = iface; + pl->link_config.pause = MLO_PAUSE_AN; + pl->link_config.speed = SPEED_UNKNOWN; + pl->link_config.duplex = DUPLEX_UNKNOWN; + pl->pcs_state = PCS_STATE_DOWN; + pl->mac_ops = mac_ops; + __set_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state); + timer_setup(&pl->link_poll, phylink_fixed_poll, 0); + + bitmap_fill(pl->supported, __ETHTOOL_LINK_MODE_MASK_NBITS); + linkmode_copy(pl->link_config.advertising, pl->supported); + phylink_validate(pl, pl->supported, &pl->link_config); + + ret = phylink_parse_mode(pl, fwnode); + if (ret < 0) { + kfree(pl); + return ERR_PTR(ret); + } + + if (pl->cfg_link_an_mode == MLO_AN_FIXED) { + ret = phylink_parse_fixedlink(pl, fwnode); + if (ret < 0) { + kfree(pl); + return ERR_PTR(ret); + } + } + + pl->cur_link_an_mode = pl->cfg_link_an_mode; + + ret = phylink_register_sfp(pl, fwnode); + if (ret < 0) { + kfree(pl); + return ERR_PTR(ret); + } + + return pl; +} +EXPORT_SYMBOL_GPL(phylink_create); + +/** + * phylink_destroy() - cleanup and destroy the phylink instance + * @pl: a pointer to a &struct phylink returned from phylink_create() + * + * Destroy a phylink instance. Any PHY that has been attached must have been + * cleaned up via phylink_disconnect_phy() prior to calling this function. + * + * Note: the rtnl lock must not be held when calling this function. + */ +void phylink_destroy(struct phylink *pl) +{ + sfp_bus_del_upstream(pl->sfp_bus); + if (pl->link_gpio) + gpiod_put(pl->link_gpio); + + cancel_work_sync(&pl->resolve); + kfree(pl); +} +EXPORT_SYMBOL_GPL(phylink_destroy); + +/** + * phylink_expects_phy() - Determine if phylink expects a phy to be attached + * @pl: a pointer to a &struct phylink returned from phylink_create() + * + * When using fixed-link mode, or in-band mode with 1000base-X or 2500base-X, + * no PHY is needed. + * + * Returns true if phylink will be expecting a PHY. + */ +bool phylink_expects_phy(struct phylink *pl) +{ + if (pl->cfg_link_an_mode == MLO_AN_FIXED || + (pl->cfg_link_an_mode == MLO_AN_INBAND && + phy_interface_mode_is_8023z(pl->link_config.interface))) + return false; + return true; +} +EXPORT_SYMBOL_GPL(phylink_expects_phy); + +static void phylink_phy_change(struct phy_device *phydev, bool up) +{ + struct phylink *pl = phydev->phylink; + bool tx_pause, rx_pause; + + phy_get_pause(phydev, &tx_pause, &rx_pause); + + mutex_lock(&pl->state_mutex); + pl->phy_state.speed = phydev->speed; + pl->phy_state.duplex = phydev->duplex; + pl->phy_state.rate_matching = phydev->rate_matching; + pl->phy_state.pause = MLO_PAUSE_NONE; + if (tx_pause) + pl->phy_state.pause |= MLO_PAUSE_TX; + if (rx_pause) + pl->phy_state.pause |= MLO_PAUSE_RX; + pl->phy_state.interface = phydev->interface; + pl->phy_state.link = up; + mutex_unlock(&pl->state_mutex); + + phylink_run_resolve(pl); + + phylink_dbg(pl, "phy link %s %s/%s/%s/%s/%s\n", up ? "up" : "down", + phy_modes(phydev->interface), + phy_speed_to_str(phydev->speed), + phy_duplex_to_str(phydev->duplex), + phy_rate_matching_to_str(phydev->rate_matching), + phylink_pause_to_str(pl->phy_state.pause)); +} + +static int phylink_bringup_phy(struct phylink *pl, struct phy_device *phy, + phy_interface_t interface) +{ + struct phylink_link_state config; + __ETHTOOL_DECLARE_LINK_MODE_MASK(supported); + char *irq_str; + int ret; + + /* + * This is the new way of dealing with flow control for PHYs, + * as described by Timur Tabi in commit 529ed1275263 ("net: phy: + * phy drivers should not set SUPPORTED_[Asym_]Pause") except + * using our validate call to the MAC, we rely upon the MAC + * clearing the bits from both supported and advertising fields. + */ + phy_support_asym_pause(phy); + + memset(&config, 0, sizeof(config)); + linkmode_copy(supported, phy->supported); + linkmode_copy(config.advertising, phy->advertising); + + /* Check whether we would use rate matching for the proposed interface + * mode. + */ + config.rate_matching = phy_get_rate_matching(phy, interface); + + /* Clause 45 PHYs may switch their Serdes lane between, e.g. 10GBASE-R, + * 5GBASE-R, 2500BASE-X and SGMII if they are not using rate matching. + * For some interface modes (e.g. RXAUI, XAUI and USXGMII) switching + * their Serdes is either unnecessary or not reasonable. + * + * For these which switch interface modes, we really need to know which + * interface modes the PHY supports to properly work out which ethtool + * linkmodes can be supported. For now, as a work-around, we validate + * against all interface modes, which may lead to more ethtool link + * modes being advertised than are actually supported. + */ + if (phy->is_c45 && config.rate_matching == RATE_MATCH_NONE && + interface != PHY_INTERFACE_MODE_RXAUI && + interface != PHY_INTERFACE_MODE_XAUI && + interface != PHY_INTERFACE_MODE_USXGMII) + config.interface = PHY_INTERFACE_MODE_NA; + else + config.interface = interface; + + ret = phylink_validate(pl, supported, &config); + if (ret) { + phylink_warn(pl, "validation of %s with support %*pb and advertisement %*pb failed: %pe\n", + phy_modes(config.interface), + __ETHTOOL_LINK_MODE_MASK_NBITS, phy->supported, + __ETHTOOL_LINK_MODE_MASK_NBITS, config.advertising, + ERR_PTR(ret)); + return ret; + } + + phy->phylink = pl; + phy->phy_link_change = phylink_phy_change; + + irq_str = phy_attached_info_irq(phy); + phylink_info(pl, + "PHY [%s] driver [%s] (irq=%s)\n", + dev_name(&phy->mdio.dev), phy->drv->name, irq_str); + kfree(irq_str); + + mutex_lock(&phy->lock); + mutex_lock(&pl->state_mutex); + pl->phydev = phy; + pl->phy_state.interface = interface; + pl->phy_state.pause = MLO_PAUSE_NONE; + pl->phy_state.speed = SPEED_UNKNOWN; + pl->phy_state.duplex = DUPLEX_UNKNOWN; + pl->phy_state.rate_matching = RATE_MATCH_NONE; + linkmode_copy(pl->supported, supported); + linkmode_copy(pl->link_config.advertising, config.advertising); + + /* Restrict the phy advertisement according to the MAC support. */ + linkmode_copy(phy->advertising, config.advertising); + mutex_unlock(&pl->state_mutex); + mutex_unlock(&phy->lock); + + phylink_dbg(pl, + "phy: %s setting supported %*pb advertising %*pb\n", + phy_modes(interface), + __ETHTOOL_LINK_MODE_MASK_NBITS, pl->supported, + __ETHTOOL_LINK_MODE_MASK_NBITS, phy->advertising); + + if (phy_interrupt_is_valid(phy)) + phy_request_interrupt(phy); + + if (pl->config->mac_managed_pm) + phy->mac_managed_pm = true; + + return 0; +} + +static int phylink_attach_phy(struct phylink *pl, struct phy_device *phy, + phy_interface_t interface) +{ + if (WARN_ON(pl->cfg_link_an_mode == MLO_AN_FIXED || + (pl->cfg_link_an_mode == MLO_AN_INBAND && + phy_interface_mode_is_8023z(interface) && !pl->sfp_bus))) + return -EINVAL; + + if (pl->phydev) + return -EBUSY; + + return phy_attach_direct(pl->netdev, phy, 0, interface); +} + +/** + * phylink_connect_phy() - connect a PHY to the phylink instance + * @pl: a pointer to a &struct phylink returned from phylink_create() + * @phy: a pointer to a &struct phy_device. + * + * Connect @phy to the phylink instance specified by @pl by calling + * phy_attach_direct(). Configure the @phy according to the MAC driver's + * capabilities, start the PHYLIB state machine and enable any interrupts + * that the PHY supports. + * + * This updates the phylink's ethtool supported and advertising link mode + * masks. + * + * Returns 0 on success or a negative errno. + */ +int phylink_connect_phy(struct phylink *pl, struct phy_device *phy) +{ + int ret; + + /* Use PHY device/driver interface */ + if (pl->link_interface == PHY_INTERFACE_MODE_NA) { + pl->link_interface = phy->interface; + pl->link_config.interface = pl->link_interface; + } + + ret = phylink_attach_phy(pl, phy, pl->link_interface); + if (ret < 0) + return ret; + + ret = phylink_bringup_phy(pl, phy, pl->link_config.interface); + if (ret) + phy_detach(phy); + + return ret; +} +EXPORT_SYMBOL_GPL(phylink_connect_phy); + +/** + * phylink_of_phy_connect() - connect the PHY specified in the DT mode. + * @pl: a pointer to a &struct phylink returned from phylink_create() + * @dn: a pointer to a &struct device_node. + * @flags: PHY-specific flags to communicate to the PHY device driver + * + * Connect the phy specified in the device node @dn to the phylink instance + * specified by @pl. Actions specified in phylink_connect_phy() will be + * performed. + * + * Returns 0 on success or a negative errno. + */ +int phylink_of_phy_connect(struct phylink *pl, struct device_node *dn, + u32 flags) +{ + return phylink_fwnode_phy_connect(pl, of_fwnode_handle(dn), flags); +} +EXPORT_SYMBOL_GPL(phylink_of_phy_connect); + +/** + * phylink_fwnode_phy_connect() - connect the PHY specified in the fwnode. + * @pl: a pointer to a &struct phylink returned from phylink_create() + * @fwnode: a pointer to a &struct fwnode_handle. + * @flags: PHY-specific flags to communicate to the PHY device driver + * + * Connect the phy specified @fwnode to the phylink instance specified + * by @pl. + * + * Returns 0 on success or a negative errno. + */ +int phylink_fwnode_phy_connect(struct phylink *pl, + const struct fwnode_handle *fwnode, + u32 flags) +{ + struct fwnode_handle *phy_fwnode; + struct phy_device *phy_dev; + int ret; + + /* Fixed links and 802.3z are handled without needing a PHY */ + if (pl->cfg_link_an_mode == MLO_AN_FIXED || + (pl->cfg_link_an_mode == MLO_AN_INBAND && + phy_interface_mode_is_8023z(pl->link_interface))) + return 0; + + phy_fwnode = fwnode_get_phy_node(fwnode); + if (IS_ERR(phy_fwnode)) { + if (pl->cfg_link_an_mode == MLO_AN_PHY) + return -ENODEV; + return 0; + } + + phy_dev = fwnode_phy_find_device(phy_fwnode); + /* We're done with the phy_node handle */ + fwnode_handle_put(phy_fwnode); + if (!phy_dev) + return -ENODEV; + + /* Use PHY device/driver interface */ + if (pl->link_interface == PHY_INTERFACE_MODE_NA) { + pl->link_interface = phy_dev->interface; + pl->link_config.interface = pl->link_interface; + } + + ret = phy_attach_direct(pl->netdev, phy_dev, flags, + pl->link_interface); + phy_device_free(phy_dev); + if (ret) + return ret; + + ret = phylink_bringup_phy(pl, phy_dev, pl->link_config.interface); + if (ret) + phy_detach(phy_dev); + + return ret; +} +EXPORT_SYMBOL_GPL(phylink_fwnode_phy_connect); + +/** + * phylink_disconnect_phy() - disconnect any PHY attached to the phylink + * instance. + * @pl: a pointer to a &struct phylink returned from phylink_create() + * + * Disconnect any current PHY from the phylink instance described by @pl. + */ +void phylink_disconnect_phy(struct phylink *pl) +{ + struct phy_device *phy; + + ASSERT_RTNL(); + + phy = pl->phydev; + if (phy) { + mutex_lock(&phy->lock); + mutex_lock(&pl->state_mutex); + pl->phydev = NULL; + mutex_unlock(&pl->state_mutex); + mutex_unlock(&phy->lock); + flush_work(&pl->resolve); + + phy_disconnect(phy); + } +} +EXPORT_SYMBOL_GPL(phylink_disconnect_phy); + +static void phylink_link_changed(struct phylink *pl, bool up, const char *what) +{ + if (!up) + pl->mac_link_dropped = true; + phylink_run_resolve(pl); + phylink_dbg(pl, "%s link %s\n", what, up ? "up" : "down"); +} + +/** + * phylink_mac_change() - notify phylink of a change in MAC state + * @pl: a pointer to a &struct phylink returned from phylink_create() + * @up: indicates whether the link is currently up. + * + * The MAC driver should call this driver when the state of its link + * changes (eg, link failure, new negotiation results, etc.) + */ +void phylink_mac_change(struct phylink *pl, bool up) +{ + phylink_link_changed(pl, up, "mac"); +} +EXPORT_SYMBOL_GPL(phylink_mac_change); + +/** + * phylink_pcs_change() - notify phylink of a change to PCS link state + * @pcs: pointer to &struct phylink_pcs + * @up: indicates whether the link is currently up. + * + * The PCS driver should call this when the state of its link changes + * (e.g. link failure, new negotiation results, etc.) Note: it should + * not determine "up" by reading the BMSR. If in doubt about the link + * state at interrupt time, then pass true if pcs_get_state() returns + * the latched link-down state, otherwise pass false. + */ +void phylink_pcs_change(struct phylink_pcs *pcs, bool up) +{ + struct phylink *pl = pcs->phylink; + + if (pl) + phylink_link_changed(pl, up, "pcs"); +} +EXPORT_SYMBOL_GPL(phylink_pcs_change); + +static irqreturn_t phylink_link_handler(int irq, void *data) +{ + struct phylink *pl = data; + + phylink_run_resolve(pl); + + return IRQ_HANDLED; +} + +/** + * phylink_start() - start a phylink instance + * @pl: a pointer to a &struct phylink returned from phylink_create() + * + * Start the phylink instance specified by @pl, configuring the MAC for the + * desired link mode(s) and negotiation style. This should be called from the + * network device driver's &struct net_device_ops ndo_open() method. + */ +void phylink_start(struct phylink *pl) +{ + bool poll = false; + + ASSERT_RTNL(); + + phylink_info(pl, "configuring for %s/%s link mode\n", + phylink_an_mode_str(pl->cur_link_an_mode), + phy_modes(pl->link_config.interface)); + + /* Always set the carrier off */ + if (pl->netdev) + netif_carrier_off(pl->netdev); + + pl->pcs_state = PCS_STATE_STARTING; + + /* Apply the link configuration to the MAC when starting. This allows + * a fixed-link to start with the correct parameters, and also + * ensures that we set the appropriate advertisement for Serdes links. + * + * Restart autonegotiation if using 802.3z to ensure that the link + * parameters are properly negotiated. This is necessary for DSA + * switches using 802.3z negotiation to ensure they see our modes. + */ + phylink_mac_initial_config(pl, true); + + pl->pcs_state = PCS_STATE_STARTED; + + phylink_enable_and_run_resolve(pl, PHYLINK_DISABLE_STOPPED); + + if (pl->cfg_link_an_mode == MLO_AN_FIXED && pl->link_gpio) { + int irq = gpiod_to_irq(pl->link_gpio); + + if (irq > 0) { + if (!request_irq(irq, phylink_link_handler, + IRQF_TRIGGER_RISING | + IRQF_TRIGGER_FALLING, + "netdev link", pl)) + pl->link_irq = irq; + else + irq = 0; + } + if (irq <= 0) + poll = true; + } + + if (pl->cfg_link_an_mode == MLO_AN_FIXED) + poll |= pl->config->poll_fixed_state; + + if (poll) + mod_timer(&pl->link_poll, jiffies + HZ); + if (pl->phydev) + phy_start(pl->phydev); + if (pl->sfp_bus) + sfp_upstream_start(pl->sfp_bus); +} +EXPORT_SYMBOL_GPL(phylink_start); + +/** + * phylink_stop() - stop a phylink instance + * @pl: a pointer to a &struct phylink returned from phylink_create() + * + * Stop the phylink instance specified by @pl. This should be called from the + * network device driver's &struct net_device_ops ndo_stop() method. The + * network device's carrier state should not be changed prior to calling this + * function. + * + * This will synchronously bring down the link if the link is not already + * down (in other words, it will trigger a mac_link_down() method call.) + */ +void phylink_stop(struct phylink *pl) +{ + ASSERT_RTNL(); + + if (pl->sfp_bus) + sfp_upstream_stop(pl->sfp_bus); + if (pl->phydev) + phy_stop(pl->phydev); + del_timer_sync(&pl->link_poll); + if (pl->link_irq) { + free_irq(pl->link_irq, pl); + pl->link_irq = 0; + } + + phylink_run_resolve_and_disable(pl, PHYLINK_DISABLE_STOPPED); + + pl->pcs_state = PCS_STATE_DOWN; + + phylink_pcs_disable(pl->pcs); +} +EXPORT_SYMBOL_GPL(phylink_stop); + +/** + * phylink_suspend() - handle a network device suspend event + * @pl: a pointer to a &struct phylink returned from phylink_create() + * @mac_wol: true if the MAC needs to receive packets for Wake-on-Lan + * + * Handle a network device suspend event. There are several cases: + * + * - If Wake-on-Lan is not active, we can bring down the link between + * the MAC and PHY by calling phylink_stop(). + * - If Wake-on-Lan is active, and being handled only by the PHY, we + * can also bring down the link between the MAC and PHY. + * - If Wake-on-Lan is active, but being handled by the MAC, the MAC + * still needs to receive packets, so we can not bring the link down. + */ +void phylink_suspend(struct phylink *pl, bool mac_wol) +{ + ASSERT_RTNL(); + + if (mac_wol && (!pl->netdev || pl->netdev->wol_enabled)) { + /* Wake-on-Lan enabled, MAC handling */ + mutex_lock(&pl->state_mutex); + + /* Stop the resolver bringing the link up */ + __set_bit(PHYLINK_DISABLE_MAC_WOL, &pl->phylink_disable_state); + + /* Disable the carrier, to prevent transmit timeouts, + * but one would hope all packets have been sent. This + * also means phylink_resolve() will do nothing. + */ + if (pl->netdev) + netif_carrier_off(pl->netdev); + else + pl->old_link_state = false; + + /* We do not call mac_link_down() here as we want the + * link to remain up to receive the WoL packets. + */ + mutex_unlock(&pl->state_mutex); + } else { + phylink_stop(pl); + } +} +EXPORT_SYMBOL_GPL(phylink_suspend); + +/** + * phylink_resume() - handle a network device resume event + * @pl: a pointer to a &struct phylink returned from phylink_create() + * + * Undo the effects of phylink_suspend(), returning the link to an + * operational state. + */ +void phylink_resume(struct phylink *pl) +{ + ASSERT_RTNL(); + + if (test_bit(PHYLINK_DISABLE_MAC_WOL, &pl->phylink_disable_state)) { + /* Wake-on-Lan enabled, MAC handling */ + + /* Call mac_link_down() so we keep the overall state balanced. + * Do this under the state_mutex lock for consistency. This + * will cause a "Link Down" message to be printed during + * resume, which is harmless - the true link state will be + * printed when we run a resolve. + */ + mutex_lock(&pl->state_mutex); + phylink_link_down(pl); + mutex_unlock(&pl->state_mutex); + + /* Re-apply the link parameters so that all the settings get + * restored to the MAC. + */ + phylink_mac_initial_config(pl, true); + + /* Re-enable and re-resolve the link parameters */ + phylink_enable_and_run_resolve(pl, PHYLINK_DISABLE_MAC_WOL); + } else { + phylink_start(pl); + } +} +EXPORT_SYMBOL_GPL(phylink_resume); + +/** + * phylink_ethtool_get_wol() - get the wake on lan parameters for the PHY + * @pl: a pointer to a &struct phylink returned from phylink_create() + * @wol: a pointer to &struct ethtool_wolinfo to hold the read parameters + * + * Read the wake on lan parameters from the PHY attached to the phylink + * instance specified by @pl. If no PHY is currently attached, report no + * support for wake on lan. + */ +void phylink_ethtool_get_wol(struct phylink *pl, struct ethtool_wolinfo *wol) +{ + ASSERT_RTNL(); + + wol->supported = 0; + wol->wolopts = 0; + + if (pl->phydev) + phy_ethtool_get_wol(pl->phydev, wol); +} +EXPORT_SYMBOL_GPL(phylink_ethtool_get_wol); + +/** + * phylink_ethtool_set_wol() - set wake on lan parameters + * @pl: a pointer to a &struct phylink returned from phylink_create() + * @wol: a pointer to &struct ethtool_wolinfo for the desired parameters + * + * Set the wake on lan parameters for the PHY attached to the phylink + * instance specified by @pl. If no PHY is attached, returns %EOPNOTSUPP + * error. + * + * Returns zero on success or negative errno code. + */ +int phylink_ethtool_set_wol(struct phylink *pl, struct ethtool_wolinfo *wol) +{ + int ret = -EOPNOTSUPP; + + ASSERT_RTNL(); + + if (pl->phydev) + ret = phy_ethtool_set_wol(pl->phydev, wol); + + return ret; +} +EXPORT_SYMBOL_GPL(phylink_ethtool_set_wol); + +static void phylink_merge_link_mode(unsigned long *dst, const unsigned long *b) +{ + __ETHTOOL_DECLARE_LINK_MODE_MASK(mask); + + linkmode_zero(mask); + phylink_set_port_modes(mask); + + linkmode_and(dst, dst, mask); + linkmode_or(dst, dst, b); +} + +static void phylink_get_ksettings(const struct phylink_link_state *state, + struct ethtool_link_ksettings *kset) +{ + phylink_merge_link_mode(kset->link_modes.advertising, state->advertising); + linkmode_copy(kset->link_modes.lp_advertising, state->lp_advertising); + if (kset->base.rate_matching == RATE_MATCH_NONE) { + kset->base.speed = state->speed; + kset->base.duplex = state->duplex; + } + kset->base.autoneg = linkmode_test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, + state->advertising) ? + AUTONEG_ENABLE : AUTONEG_DISABLE; +} + +/** + * phylink_ethtool_ksettings_get() - get the current link settings + * @pl: a pointer to a &struct phylink returned from phylink_create() + * @kset: a pointer to a &struct ethtool_link_ksettings to hold link settings + * + * Read the current link settings for the phylink instance specified by @pl. + * This will be the link settings read from the MAC, PHY or fixed link + * settings depending on the current negotiation mode. + */ +int phylink_ethtool_ksettings_get(struct phylink *pl, + struct ethtool_link_ksettings *kset) +{ + struct phylink_link_state link_state; + + ASSERT_RTNL(); + + if (pl->phydev) + phy_ethtool_ksettings_get(pl->phydev, kset); + else + kset->base.port = pl->link_port; + + linkmode_copy(kset->link_modes.supported, pl->supported); + + switch (pl->cur_link_an_mode) { + case MLO_AN_FIXED: + /* We are using fixed settings. Report these as the + * current link settings - and note that these also + * represent the supported speeds/duplex/pause modes. + */ + phylink_get_fixed_state(pl, &link_state); + phylink_get_ksettings(&link_state, kset); + break; + + case MLO_AN_INBAND: + /* If there is a phy attached, then use the reported + * settings from the phy with no modification. + */ + if (pl->phydev) + break; + + phylink_mac_pcs_get_state(pl, &link_state); + + /* The MAC is reporting the link results from its own PCS + * layer via in-band status. Report these as the current + * link settings. + */ + phylink_get_ksettings(&link_state, kset); + break; + } + + return 0; +} +EXPORT_SYMBOL_GPL(phylink_ethtool_ksettings_get); + +/** + * phylink_ethtool_ksettings_set() - set the link settings + * @pl: a pointer to a &struct phylink returned from phylink_create() + * @kset: a pointer to a &struct ethtool_link_ksettings for the desired modes + */ +int phylink_ethtool_ksettings_set(struct phylink *pl, + const struct ethtool_link_ksettings *kset) +{ + __ETHTOOL_DECLARE_LINK_MODE_MASK(support); + struct phylink_link_state config; + const struct phy_setting *s; + + ASSERT_RTNL(); + + if (pl->phydev) { + struct ethtool_link_ksettings phy_kset = *kset; + + linkmode_and(phy_kset.link_modes.advertising, + phy_kset.link_modes.advertising, + pl->supported); + + /* We can rely on phylib for this update; we also do not need + * to update the pl->link_config settings: + * - the configuration returned via ksettings_get() will come + * from phylib whenever a PHY is present. + * - link_config.interface will be updated by the PHY calling + * back via phylink_phy_change() and a subsequent resolve. + * - initial link configuration for PHY mode comes from the + * last phy state updated via phylink_phy_change(). + * - other configuration changes (e.g. pause modes) are + * performed directly via phylib. + * - if in in-band mode with a PHY, the link configuration + * is passed on the link from the PHY, and all of + * link_config.{speed,duplex,an_enabled,pause} are not used. + * - the only possible use would be link_config.advertising + * pause modes when in 1000base-X mode with a PHY, but in + * the presence of a PHY, this should not be changed as that + * should be determined from the media side advertisement. + */ + return phy_ethtool_ksettings_set(pl->phydev, &phy_kset); + } + + config = pl->link_config; + /* Mask out unsupported advertisements */ + linkmode_and(config.advertising, kset->link_modes.advertising, + pl->supported); + + /* FIXME: should we reject autoneg if phy/mac does not support it? */ + switch (kset->base.autoneg) { + case AUTONEG_DISABLE: + /* Autonegotiation disabled, select a suitable speed and + * duplex. + */ + s = phy_lookup_setting(kset->base.speed, kset->base.duplex, + pl->supported, false); + if (!s) + return -EINVAL; + + /* If we have a fixed link, refuse to change link parameters. + * If the link parameters match, accept them but do nothing. + */ + if (pl->cur_link_an_mode == MLO_AN_FIXED) { + if (s->speed != pl->link_config.speed || + s->duplex != pl->link_config.duplex) + return -EINVAL; + return 0; + } + + config.speed = s->speed; + config.duplex = s->duplex; + break; + + case AUTONEG_ENABLE: + /* If we have a fixed link, allow autonegotiation (since that + * is our default case) but do not allow the advertisement to + * be changed. If the advertisement matches, simply return. + */ + if (pl->cur_link_an_mode == MLO_AN_FIXED) { + if (!linkmode_equal(config.advertising, + pl->link_config.advertising)) + return -EINVAL; + return 0; + } + + config.speed = SPEED_UNKNOWN; + config.duplex = DUPLEX_UNKNOWN; + break; + + default: + return -EINVAL; + } + + /* We have ruled out the case with a PHY attached, and the + * fixed-link cases. All that is left are in-band links. + */ + linkmode_mod_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, config.advertising, + kset->base.autoneg == AUTONEG_ENABLE); + + /* If this link is with an SFP, ensure that changes to advertised modes + * also cause the associated interface to be selected such that the + * link can be configured correctly. + */ + if (pl->sfp_bus) { + config.interface = sfp_select_interface(pl->sfp_bus, + config.advertising); + if (config.interface == PHY_INTERFACE_MODE_NA) { + phylink_err(pl, + "selection of interface failed, advertisement %*pb\n", + __ETHTOOL_LINK_MODE_MASK_NBITS, + config.advertising); + return -EINVAL; + } + + /* Revalidate with the selected interface */ + linkmode_copy(support, pl->supported); + if (phylink_validate(pl, support, &config)) { + phylink_err(pl, "validation of %s/%s with support %*pb failed\n", + phylink_an_mode_str(pl->cur_link_an_mode), + phy_modes(config.interface), + __ETHTOOL_LINK_MODE_MASK_NBITS, support); + return -EINVAL; + } + } else { + /* Validate without changing the current supported mask. */ + linkmode_copy(support, pl->supported); + if (phylink_validate(pl, support, &config)) + return -EINVAL; + } + + /* If autonegotiation is enabled, we must have an advertisement */ + if (linkmode_test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, + config.advertising) && + phylink_is_empty_linkmode(config.advertising)) + return -EINVAL; + + mutex_lock(&pl->state_mutex); + pl->link_config.speed = config.speed; + pl->link_config.duplex = config.duplex; + + if (pl->link_config.interface != config.interface) { + /* The interface changed, e.g. 1000base-X <-> 2500base-X */ + /* We need to force the link down, then change the interface */ + if (pl->old_link_state) { + phylink_link_down(pl); + pl->old_link_state = false; + } + if (!test_bit(PHYLINK_DISABLE_STOPPED, + &pl->phylink_disable_state)) + phylink_major_config(pl, false, &config); + pl->link_config.interface = config.interface; + linkmode_copy(pl->link_config.advertising, config.advertising); + } else if (!linkmode_equal(pl->link_config.advertising, + config.advertising)) { + linkmode_copy(pl->link_config.advertising, config.advertising); + phylink_change_inband_advert(pl); + } + mutex_unlock(&pl->state_mutex); + + return 0; +} +EXPORT_SYMBOL_GPL(phylink_ethtool_ksettings_set); + +/** + * phylink_ethtool_nway_reset() - restart negotiation + * @pl: a pointer to a &struct phylink returned from phylink_create() + * + * Restart negotiation for the phylink instance specified by @pl. This will + * cause any attached phy to restart negotiation with the link partner, and + * if the MAC is in a BaseX mode, the MAC will also be requested to restart + * negotiation. + * + * Returns zero on success, or negative error code. + */ +int phylink_ethtool_nway_reset(struct phylink *pl) +{ + int ret = 0; + + ASSERT_RTNL(); + + if (pl->phydev) + ret = phy_restart_aneg(pl->phydev); + phylink_pcs_an_restart(pl); + + return ret; +} +EXPORT_SYMBOL_GPL(phylink_ethtool_nway_reset); + +/** + * phylink_ethtool_get_pauseparam() - get the current pause parameters + * @pl: a pointer to a &struct phylink returned from phylink_create() + * @pause: a pointer to a &struct ethtool_pauseparam + */ +void phylink_ethtool_get_pauseparam(struct phylink *pl, + struct ethtool_pauseparam *pause) +{ + ASSERT_RTNL(); + + pause->autoneg = !!(pl->link_config.pause & MLO_PAUSE_AN); + pause->rx_pause = !!(pl->link_config.pause & MLO_PAUSE_RX); + pause->tx_pause = !!(pl->link_config.pause & MLO_PAUSE_TX); +} +EXPORT_SYMBOL_GPL(phylink_ethtool_get_pauseparam); + +/** + * phylink_ethtool_set_pauseparam() - set the current pause parameters + * @pl: a pointer to a &struct phylink returned from phylink_create() + * @pause: a pointer to a &struct ethtool_pauseparam + */ +int phylink_ethtool_set_pauseparam(struct phylink *pl, + struct ethtool_pauseparam *pause) +{ + struct phylink_link_state *config = &pl->link_config; + bool manual_changed; + int pause_state; + + ASSERT_RTNL(); + + if (pl->cur_link_an_mode == MLO_AN_FIXED) + return -EOPNOTSUPP; + + if (!phylink_test(pl->supported, Pause) && + !phylink_test(pl->supported, Asym_Pause)) + return -EOPNOTSUPP; + + if (!phylink_test(pl->supported, Asym_Pause) && + pause->rx_pause != pause->tx_pause) + return -EINVAL; + + pause_state = 0; + if (pause->autoneg) + pause_state |= MLO_PAUSE_AN; + if (pause->rx_pause) + pause_state |= MLO_PAUSE_RX; + if (pause->tx_pause) + pause_state |= MLO_PAUSE_TX; + + mutex_lock(&pl->state_mutex); + /* + * See the comments for linkmode_set_pause(), wrt the deficiencies + * with the current implementation. A solution to this issue would + * be: + * ethtool Local device + * rx tx Pause AsymDir + * 0 0 0 0 + * 1 0 1 1 + * 0 1 0 1 + * 1 1 1 1 + * and then use the ethtool rx/tx enablement status to mask the + * rx/tx pause resolution. + */ + linkmode_set_pause(config->advertising, pause->tx_pause, + pause->rx_pause); + + manual_changed = (config->pause ^ pause_state) & MLO_PAUSE_AN || + (!(pause_state & MLO_PAUSE_AN) && + (config->pause ^ pause_state) & MLO_PAUSE_TXRX_MASK); + + config->pause = pause_state; + + /* Update our in-band advertisement, triggering a renegotiation if + * the advertisement changed. + */ + if (!pl->phydev) + phylink_change_inband_advert(pl); + + mutex_unlock(&pl->state_mutex); + + /* If we have a PHY, a change of the pause frame advertisement will + * cause phylib to renegotiate (if AN is enabled) which will in turn + * call our phylink_phy_change() and trigger a resolve. Note that + * we can't hold our state mutex while calling phy_set_asym_pause(). + */ + if (pl->phydev) + phy_set_asym_pause(pl->phydev, pause->rx_pause, + pause->tx_pause); + + /* If the manual pause settings changed, make sure we trigger a + * resolve to update their state; we can not guarantee that the + * link will cycle. + */ + if (manual_changed) { + pl->mac_link_dropped = true; + phylink_run_resolve(pl); + } + + return 0; +} +EXPORT_SYMBOL_GPL(phylink_ethtool_set_pauseparam); + +/** + * phylink_get_eee_err() - read the energy efficient ethernet error + * counter + * @pl: a pointer to a &struct phylink returned from phylink_create(). + * + * Read the Energy Efficient Ethernet error counter from the PHY associated + * with the phylink instance specified by @pl. + * + * Returns positive error counter value, or negative error code. + */ +int phylink_get_eee_err(struct phylink *pl) +{ + int ret = 0; + + ASSERT_RTNL(); + + if (pl->phydev) + ret = phy_get_eee_err(pl->phydev); + + return ret; +} +EXPORT_SYMBOL_GPL(phylink_get_eee_err); + +/** + * phylink_init_eee() - init and check the EEE features + * @pl: a pointer to a &struct phylink returned from phylink_create() + * @clk_stop_enable: allow PHY to stop receive clock + * + * Must be called either with RTNL held or within mac_link_up() + */ +int phylink_init_eee(struct phylink *pl, bool clk_stop_enable) +{ + int ret = -EOPNOTSUPP; + + if (pl->phydev) + ret = phy_init_eee(pl->phydev, clk_stop_enable); + + return ret; +} +EXPORT_SYMBOL_GPL(phylink_init_eee); + +/** + * phylink_ethtool_get_eee() - read the energy efficient ethernet parameters + * @pl: a pointer to a &struct phylink returned from phylink_create() + * @eee: a pointer to a &struct ethtool_eee for the read parameters + */ +int phylink_ethtool_get_eee(struct phylink *pl, struct ethtool_eee *eee) +{ + int ret = -EOPNOTSUPP; + + ASSERT_RTNL(); + + if (pl->phydev) + ret = phy_ethtool_get_eee(pl->phydev, eee); + + return ret; +} +EXPORT_SYMBOL_GPL(phylink_ethtool_get_eee); + +/** + * phylink_ethtool_set_eee() - set the energy efficient ethernet parameters + * @pl: a pointer to a &struct phylink returned from phylink_create() + * @eee: a pointer to a &struct ethtool_eee for the desired parameters + */ +int phylink_ethtool_set_eee(struct phylink *pl, struct ethtool_eee *eee) +{ + int ret = -EOPNOTSUPP; + + ASSERT_RTNL(); + + if (pl->phydev) + ret = phy_ethtool_set_eee(pl->phydev, eee); + + return ret; +} +EXPORT_SYMBOL_GPL(phylink_ethtool_set_eee); + +/* This emulates MII registers for a fixed-mode phy operating as per the + * passed in state. "aneg" defines if we report negotiation is possible. + * + * FIXME: should deal with negotiation state too. + */ +static int phylink_mii_emul_read(unsigned int reg, + struct phylink_link_state *state) +{ + struct fixed_phy_status fs; + unsigned long *lpa = state->lp_advertising; + int val; + + fs.link = state->link; + fs.speed = state->speed; + fs.duplex = state->duplex; + fs.pause = test_bit(ETHTOOL_LINK_MODE_Pause_BIT, lpa); + fs.asym_pause = test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, lpa); + + val = swphy_read_reg(reg, &fs); + if (reg == MII_BMSR) { + if (!state->an_complete) + val &= ~BMSR_ANEGCOMPLETE; + } + return val; +} + +static int phylink_phy_read(struct phylink *pl, unsigned int phy_id, + unsigned int reg) +{ + struct phy_device *phydev = pl->phydev; + int prtad, devad; + + if (mdio_phy_id_is_c45(phy_id)) { + prtad = mdio_phy_id_prtad(phy_id); + devad = mdio_phy_id_devad(phy_id); + return mdiobus_c45_read(pl->phydev->mdio.bus, prtad, devad, + reg); + } + + if (phydev->is_c45) { + switch (reg) { + case MII_BMCR: + case MII_BMSR: + case MII_PHYSID1: + case MII_PHYSID2: + devad = __ffs(phydev->c45_ids.mmds_present); + break; + case MII_ADVERTISE: + case MII_LPA: + if (!(phydev->c45_ids.mmds_present & MDIO_DEVS_AN)) + return -EINVAL; + devad = MDIO_MMD_AN; + if (reg == MII_ADVERTISE) + reg = MDIO_AN_ADVERTISE; + else + reg = MDIO_AN_LPA; + break; + default: + return -EINVAL; + } + prtad = phy_id; + return mdiobus_c45_read(pl->phydev->mdio.bus, prtad, devad, + reg); + } + + return mdiobus_read(pl->phydev->mdio.bus, phy_id, reg); +} + +static int phylink_phy_write(struct phylink *pl, unsigned int phy_id, + unsigned int reg, unsigned int val) +{ + struct phy_device *phydev = pl->phydev; + int prtad, devad; + + if (mdio_phy_id_is_c45(phy_id)) { + prtad = mdio_phy_id_prtad(phy_id); + devad = mdio_phy_id_devad(phy_id); + return mdiobus_c45_write(pl->phydev->mdio.bus, prtad, devad, + reg, val); + } + + if (phydev->is_c45) { + switch (reg) { + case MII_BMCR: + case MII_BMSR: + case MII_PHYSID1: + case MII_PHYSID2: + devad = __ffs(phydev->c45_ids.mmds_present); + break; + case MII_ADVERTISE: + case MII_LPA: + if (!(phydev->c45_ids.mmds_present & MDIO_DEVS_AN)) + return -EINVAL; + devad = MDIO_MMD_AN; + if (reg == MII_ADVERTISE) + reg = MDIO_AN_ADVERTISE; + else + reg = MDIO_AN_LPA; + break; + default: + return -EINVAL; + } + return mdiobus_c45_write(pl->phydev->mdio.bus, phy_id, devad, + reg, val); + } + + return mdiobus_write(phydev->mdio.bus, phy_id, reg, val); +} + +static int phylink_mii_read(struct phylink *pl, unsigned int phy_id, + unsigned int reg) +{ + struct phylink_link_state state; + int val = 0xffff; + + switch (pl->cur_link_an_mode) { + case MLO_AN_FIXED: + if (phy_id == 0) { + phylink_get_fixed_state(pl, &state); + val = phylink_mii_emul_read(reg, &state); + } + break; + + case MLO_AN_PHY: + return -EOPNOTSUPP; + + case MLO_AN_INBAND: + if (phy_id == 0) { + phylink_mac_pcs_get_state(pl, &state); + val = phylink_mii_emul_read(reg, &state); + } + break; + } + + return val & 0xffff; +} + +static int phylink_mii_write(struct phylink *pl, unsigned int phy_id, + unsigned int reg, unsigned int val) +{ + switch (pl->cur_link_an_mode) { + case MLO_AN_FIXED: + break; + + case MLO_AN_PHY: + return -EOPNOTSUPP; + + case MLO_AN_INBAND: + break; + } + + return 0; +} + +/** + * phylink_mii_ioctl() - generic mii ioctl interface + * @pl: a pointer to a &struct phylink returned from phylink_create() + * @ifr: a pointer to a &struct ifreq for socket ioctls + * @cmd: ioctl cmd to execute + * + * Perform the specified MII ioctl on the PHY attached to the phylink instance + * specified by @pl. If no PHY is attached, emulate the presence of the PHY. + * + * Returns: zero on success or negative error code. + * + * %SIOCGMIIPHY: + * read register from the current PHY. + * %SIOCGMIIREG: + * read register from the specified PHY. + * %SIOCSMIIREG: + * set a register on the specified PHY. + */ +int phylink_mii_ioctl(struct phylink *pl, struct ifreq *ifr, int cmd) +{ + struct mii_ioctl_data *mii = if_mii(ifr); + int ret; + + ASSERT_RTNL(); + + if (pl->phydev) { + /* PHYs only exist for MLO_AN_PHY and SGMII */ + switch (cmd) { + case SIOCGMIIPHY: + mii->phy_id = pl->phydev->mdio.addr; + fallthrough; + + case SIOCGMIIREG: + ret = phylink_phy_read(pl, mii->phy_id, mii->reg_num); + if (ret >= 0) { + mii->val_out = ret; + ret = 0; + } + break; + + case SIOCSMIIREG: + ret = phylink_phy_write(pl, mii->phy_id, mii->reg_num, + mii->val_in); + break; + + default: + ret = phy_mii_ioctl(pl->phydev, ifr, cmd); + break; + } + } else { + switch (cmd) { + case SIOCGMIIPHY: + mii->phy_id = 0; + fallthrough; + + case SIOCGMIIREG: + ret = phylink_mii_read(pl, mii->phy_id, mii->reg_num); + if (ret >= 0) { + mii->val_out = ret; + ret = 0; + } + break; + + case SIOCSMIIREG: + ret = phylink_mii_write(pl, mii->phy_id, mii->reg_num, + mii->val_in); + break; + + default: + ret = -EOPNOTSUPP; + break; + } + } + + return ret; +} +EXPORT_SYMBOL_GPL(phylink_mii_ioctl); + +/** + * phylink_speed_down() - set the non-SFP PHY to lowest speed supported by both + * link partners + * @pl: a pointer to a &struct phylink returned from phylink_create() + * @sync: perform action synchronously + * + * If we have a PHY that is not part of a SFP module, then set the speed + * as described in the phy_speed_down() function. Please see this function + * for a description of the @sync parameter. + * + * Returns zero if there is no PHY, otherwise as per phy_speed_down(). + */ +int phylink_speed_down(struct phylink *pl, bool sync) +{ + int ret = 0; + + ASSERT_RTNL(); + + if (!pl->sfp_bus && pl->phydev) + ret = phy_speed_down(pl->phydev, sync); + + return ret; +} +EXPORT_SYMBOL_GPL(phylink_speed_down); + +/** + * phylink_speed_up() - restore the advertised speeds prior to the call to + * phylink_speed_down() + * @pl: a pointer to a &struct phylink returned from phylink_create() + * + * If we have a PHY that is not part of a SFP module, then restore the + * PHY speeds as per phy_speed_up(). + * + * Returns zero if there is no PHY, otherwise as per phy_speed_up(). + */ +int phylink_speed_up(struct phylink *pl) +{ + int ret = 0; + + ASSERT_RTNL(); + + if (!pl->sfp_bus && pl->phydev) + ret = phy_speed_up(pl->phydev); + + return ret; +} +EXPORT_SYMBOL_GPL(phylink_speed_up); + +static void phylink_sfp_attach(void *upstream, struct sfp_bus *bus) +{ + struct phylink *pl = upstream; + + pl->netdev->sfp_bus = bus; +} + +static void phylink_sfp_detach(void *upstream, struct sfp_bus *bus) +{ + struct phylink *pl = upstream; + + pl->netdev->sfp_bus = NULL; +} + +static const phy_interface_t phylink_sfp_interface_preference[] = { + PHY_INTERFACE_MODE_25GBASER, + PHY_INTERFACE_MODE_USXGMII, + PHY_INTERFACE_MODE_10GBASER, + PHY_INTERFACE_MODE_5GBASER, + PHY_INTERFACE_MODE_2500BASEX, + PHY_INTERFACE_MODE_SGMII, + PHY_INTERFACE_MODE_1000BASEX, + PHY_INTERFACE_MODE_100BASEX, +}; + +static DECLARE_PHY_INTERFACE_MASK(phylink_sfp_interfaces); + +static phy_interface_t phylink_choose_sfp_interface(struct phylink *pl, + const unsigned long *intf) +{ + phy_interface_t interface; + size_t i; + + interface = PHY_INTERFACE_MODE_NA; + for (i = 0; i < ARRAY_SIZE(phylink_sfp_interface_preference); i++) + if (test_bit(phylink_sfp_interface_preference[i], intf)) { + interface = phylink_sfp_interface_preference[i]; + break; + } + + return interface; +} + +static void phylink_sfp_set_config(struct phylink *pl, u8 mode, + unsigned long *supported, + struct phylink_link_state *state) +{ + bool changed = false; + + phylink_dbg(pl, "requesting link mode %s/%s with support %*pb\n", + phylink_an_mode_str(mode), phy_modes(state->interface), + __ETHTOOL_LINK_MODE_MASK_NBITS, supported); + + if (!linkmode_equal(pl->supported, supported)) { + linkmode_copy(pl->supported, supported); + changed = true; + } + + if (!linkmode_equal(pl->link_config.advertising, state->advertising)) { + linkmode_copy(pl->link_config.advertising, state->advertising); + changed = true; + } + + if (pl->cur_link_an_mode != mode || + pl->link_config.interface != state->interface) { + pl->cur_link_an_mode = mode; + pl->link_config.interface = state->interface; + + changed = true; + + phylink_info(pl, "switched to %s/%s link mode\n", + phylink_an_mode_str(mode), + phy_modes(state->interface)); + } + + if (changed && !test_bit(PHYLINK_DISABLE_STOPPED, + &pl->phylink_disable_state)) + phylink_mac_initial_config(pl, false); +} + +static int phylink_sfp_config_phy(struct phylink *pl, u8 mode, + struct phy_device *phy) +{ + __ETHTOOL_DECLARE_LINK_MODE_MASK(support1); + __ETHTOOL_DECLARE_LINK_MODE_MASK(support); + struct phylink_link_state config; + phy_interface_t iface; + int ret; + + linkmode_copy(support, phy->supported); + + memset(&config, 0, sizeof(config)); + linkmode_copy(config.advertising, phy->advertising); + config.interface = PHY_INTERFACE_MODE_NA; + config.speed = SPEED_UNKNOWN; + config.duplex = DUPLEX_UNKNOWN; + config.pause = MLO_PAUSE_AN; + + /* Ignore errors if we're expecting a PHY to attach later */ + ret = phylink_validate(pl, support, &config); + if (ret) { + phylink_err(pl, "validation with support %*pb failed: %pe\n", + __ETHTOOL_LINK_MODE_MASK_NBITS, support, + ERR_PTR(ret)); + return ret; + } + + iface = sfp_select_interface(pl->sfp_bus, config.advertising); + if (iface == PHY_INTERFACE_MODE_NA) { + phylink_err(pl, + "selection of interface failed, advertisement %*pb\n", + __ETHTOOL_LINK_MODE_MASK_NBITS, config.advertising); + return -EINVAL; + } + + config.interface = iface; + linkmode_copy(support1, support); + ret = phylink_validate(pl, support1, &config); + if (ret) { + phylink_err(pl, + "validation of %s/%s with support %*pb failed: %pe\n", + phylink_an_mode_str(mode), + phy_modes(config.interface), + __ETHTOOL_LINK_MODE_MASK_NBITS, support, + ERR_PTR(ret)); + return ret; + } + + pl->link_port = pl->sfp_port; + + phylink_sfp_set_config(pl, mode, support, &config); + + return 0; +} + +static int phylink_sfp_config_optical(struct phylink *pl) +{ + __ETHTOOL_DECLARE_LINK_MODE_MASK(support); + DECLARE_PHY_INTERFACE_MASK(interfaces); + struct phylink_link_state config; + phy_interface_t interface; + int ret; + + phylink_dbg(pl, "optical SFP: interfaces=[mac=%*pbl, sfp=%*pbl]\n", + (int)PHY_INTERFACE_MODE_MAX, + pl->config->supported_interfaces, + (int)PHY_INTERFACE_MODE_MAX, + pl->sfp_interfaces); + + /* Find the union of the supported interfaces by the PCS/MAC and + * the SFP module. + */ + phy_interface_and(interfaces, pl->config->supported_interfaces, + pl->sfp_interfaces); + if (phy_interface_empty(interfaces)) { + phylink_err(pl, "unsupported SFP module: no common interface modes\n"); + return -EINVAL; + } + + memset(&config, 0, sizeof(config)); + linkmode_copy(support, pl->sfp_support); + linkmode_copy(config.advertising, pl->sfp_support); + config.speed = SPEED_UNKNOWN; + config.duplex = DUPLEX_UNKNOWN; + config.pause = MLO_PAUSE_AN; + + /* For all the interfaces that are supported, reduce the sfp_support + * mask to only those link modes that can be supported. + */ + ret = phylink_validate_mask(pl, pl->sfp_support, &config, interfaces); + if (ret) { + phylink_err(pl, "unsupported SFP module: validation with support %*pb failed\n", + __ETHTOOL_LINK_MODE_MASK_NBITS, support); + return ret; + } + + interface = phylink_choose_sfp_interface(pl, interfaces); + if (interface == PHY_INTERFACE_MODE_NA) { + phylink_err(pl, "failed to select SFP interface\n"); + return -EINVAL; + } + + phylink_dbg(pl, "optical SFP: chosen %s interface\n", + phy_modes(interface)); + + config.interface = interface; + + /* Ignore errors if we're expecting a PHY to attach later */ + ret = phylink_validate(pl, support, &config); + if (ret) { + phylink_err(pl, "validation with support %*pb failed: %pe\n", + __ETHTOOL_LINK_MODE_MASK_NBITS, support, + ERR_PTR(ret)); + return ret; + } + + pl->link_port = pl->sfp_port; + + phylink_sfp_set_config(pl, MLO_AN_INBAND, pl->sfp_support, &config); + + return 0; +} + +static int phylink_sfp_module_insert(void *upstream, + const struct sfp_eeprom_id *id) +{ + struct phylink *pl = upstream; + + ASSERT_RTNL(); + + linkmode_zero(pl->sfp_support); + phy_interface_zero(pl->sfp_interfaces); + sfp_parse_support(pl->sfp_bus, id, pl->sfp_support, pl->sfp_interfaces); + pl->sfp_port = sfp_parse_port(pl->sfp_bus, id, pl->sfp_support); + + /* If this module may have a PHY connecting later, defer until later */ + pl->sfp_may_have_phy = sfp_may_have_phy(pl->sfp_bus, id); + if (pl->sfp_may_have_phy) + return 0; + + return phylink_sfp_config_optical(pl); +} + +static int phylink_sfp_module_start(void *upstream) +{ + struct phylink *pl = upstream; + + /* If this SFP module has a PHY, start the PHY now. */ + if (pl->phydev) { + phy_start(pl->phydev); + return 0; + } + + /* If the module may have a PHY but we didn't detect one we + * need to configure the MAC here. + */ + if (!pl->sfp_may_have_phy) + return 0; + + return phylink_sfp_config_optical(pl); +} + +static void phylink_sfp_module_stop(void *upstream) +{ + struct phylink *pl = upstream; + + /* If this SFP module has a PHY, stop it. */ + if (pl->phydev) + phy_stop(pl->phydev); +} + +static void phylink_sfp_link_down(void *upstream) +{ + struct phylink *pl = upstream; + + ASSERT_RTNL(); + + phylink_run_resolve_and_disable(pl, PHYLINK_DISABLE_LINK); +} + +static void phylink_sfp_link_up(void *upstream) +{ + struct phylink *pl = upstream; + + ASSERT_RTNL(); + + phylink_enable_and_run_resolve(pl, PHYLINK_DISABLE_LINK); +} + +/* The Broadcom BCM84881 in the Methode DM7052 is unable to provide a SGMII + * or 802.3z control word, so inband will not work. + */ +static bool phylink_phy_no_inband(struct phy_device *phy) +{ + return phy->is_c45 && phy_id_compare(phy->c45_ids.device_ids[1], + 0xae025150, 0xfffffff0); +} + +static int phylink_sfp_connect_phy(void *upstream, struct phy_device *phy) +{ + struct phylink *pl = upstream; + phy_interface_t interface; + u8 mode; + int ret; + + /* + * This is the new way of dealing with flow control for PHYs, + * as described by Timur Tabi in commit 529ed1275263 ("net: phy: + * phy drivers should not set SUPPORTED_[Asym_]Pause") except + * using our validate call to the MAC, we rely upon the MAC + * clearing the bits from both supported and advertising fields. + */ + phy_support_asym_pause(phy); + + if (phylink_phy_no_inband(phy)) + mode = MLO_AN_PHY; + else + mode = MLO_AN_INBAND; + + /* Set the PHY's host supported interfaces */ + phy_interface_and(phy->host_interfaces, phylink_sfp_interfaces, + pl->config->supported_interfaces); + + /* Do the initial configuration */ + ret = phylink_sfp_config_phy(pl, mode, phy); + if (ret < 0) + return ret; + + interface = pl->link_config.interface; + ret = phylink_attach_phy(pl, phy, interface); + if (ret < 0) + return ret; + + ret = phylink_bringup_phy(pl, phy, interface); + if (ret) + phy_detach(phy); + + return ret; +} + +static void phylink_sfp_disconnect_phy(void *upstream) +{ + phylink_disconnect_phy(upstream); +} + +static const struct sfp_upstream_ops sfp_phylink_ops = { + .attach = phylink_sfp_attach, + .detach = phylink_sfp_detach, + .module_insert = phylink_sfp_module_insert, + .module_start = phylink_sfp_module_start, + .module_stop = phylink_sfp_module_stop, + .link_up = phylink_sfp_link_up, + .link_down = phylink_sfp_link_down, + .connect_phy = phylink_sfp_connect_phy, + .disconnect_phy = phylink_sfp_disconnect_phy, +}; + +/* Helpers for MAC drivers */ + +static struct { + int bit; + int speed; +} phylink_c73_priority_resolution[] = { + { ETHTOOL_LINK_MODE_100000baseCR4_Full_BIT, SPEED_100000 }, + { ETHTOOL_LINK_MODE_100000baseKR4_Full_BIT, SPEED_100000 }, + /* 100GBASE-KP4 and 100GBASE-CR10 not supported */ + { ETHTOOL_LINK_MODE_40000baseCR4_Full_BIT, SPEED_40000 }, + { ETHTOOL_LINK_MODE_40000baseKR4_Full_BIT, SPEED_40000 }, + { ETHTOOL_LINK_MODE_10000baseKR_Full_BIT, SPEED_10000 }, + { ETHTOOL_LINK_MODE_10000baseKX4_Full_BIT, SPEED_10000 }, + /* 5GBASE-KR not supported */ + { ETHTOOL_LINK_MODE_2500baseX_Full_BIT, SPEED_2500 }, + { ETHTOOL_LINK_MODE_1000baseKX_Full_BIT, SPEED_1000 }, +}; + +void phylink_resolve_c73(struct phylink_link_state *state) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(phylink_c73_priority_resolution); i++) { + int bit = phylink_c73_priority_resolution[i].bit; + if (linkmode_test_bit(bit, state->advertising) && + linkmode_test_bit(bit, state->lp_advertising)) + break; + } + + if (i < ARRAY_SIZE(phylink_c73_priority_resolution)) { + state->speed = phylink_c73_priority_resolution[i].speed; + state->duplex = DUPLEX_FULL; + } else { + /* negotiation failure */ + state->link = false; + } + + phylink_resolve_an_pause(state); +} +EXPORT_SYMBOL_GPL(phylink_resolve_c73); + +static void phylink_decode_c37_word(struct phylink_link_state *state, + uint16_t config_reg, int speed) +{ + int fd_bit; + + if (speed == SPEED_2500) + fd_bit = ETHTOOL_LINK_MODE_2500baseX_Full_BIT; + else + fd_bit = ETHTOOL_LINK_MODE_1000baseX_Full_BIT; + + mii_lpa_mod_linkmode_x(state->lp_advertising, config_reg, fd_bit); + + if (linkmode_test_bit(fd_bit, state->advertising) && + linkmode_test_bit(fd_bit, state->lp_advertising)) { + state->speed = speed; + state->duplex = DUPLEX_FULL; + } else { + /* negotiation failure */ + state->link = false; + } + + phylink_resolve_an_pause(state); +} + +static void phylink_decode_sgmii_word(struct phylink_link_state *state, + uint16_t config_reg) +{ + if (!(config_reg & LPA_SGMII_LINK)) { + state->link = false; + return; + } + + switch (config_reg & LPA_SGMII_SPD_MASK) { + case LPA_SGMII_10: + state->speed = SPEED_10; + break; + case LPA_SGMII_100: + state->speed = SPEED_100; + break; + case LPA_SGMII_1000: + state->speed = SPEED_1000; + break; + default: + state->link = false; + return; + } + if (config_reg & LPA_SGMII_FULL_DUPLEX) + state->duplex = DUPLEX_FULL; + else + state->duplex = DUPLEX_HALF; +} + +/** + * phylink_decode_usxgmii_word() - decode the USXGMII word from a MAC PCS + * @state: a pointer to a struct phylink_link_state. + * @lpa: a 16 bit value which stores the USXGMII auto-negotiation word + * + * Helper for MAC PCS supporting the USXGMII protocol and the auto-negotiation + * code word. Decode the USXGMII code word and populate the corresponding fields + * (speed, duplex) into the phylink_link_state structure. + */ +void phylink_decode_usxgmii_word(struct phylink_link_state *state, + uint16_t lpa) +{ + switch (lpa & MDIO_USXGMII_SPD_MASK) { + case MDIO_USXGMII_10: + state->speed = SPEED_10; + break; + case MDIO_USXGMII_100: + state->speed = SPEED_100; + break; + case MDIO_USXGMII_1000: + state->speed = SPEED_1000; + break; + case MDIO_USXGMII_2500: + state->speed = SPEED_2500; + break; + case MDIO_USXGMII_5000: + state->speed = SPEED_5000; + break; + case MDIO_USXGMII_10G: + state->speed = SPEED_10000; + break; + default: + state->link = false; + return; + } + + if (lpa & MDIO_USXGMII_FULL_DUPLEX) + state->duplex = DUPLEX_FULL; + else + state->duplex = DUPLEX_HALF; +} +EXPORT_SYMBOL_GPL(phylink_decode_usxgmii_word); + +/** + * phylink_decode_usgmii_word() - decode the USGMII word from a MAC PCS + * @state: a pointer to a struct phylink_link_state. + * @lpa: a 16 bit value which stores the USGMII auto-negotiation word + * + * Helper for MAC PCS supporting the USGMII protocol and the auto-negotiation + * code word. Decode the USGMII code word and populate the corresponding fields + * (speed, duplex) into the phylink_link_state structure. The structure for this + * word is the same as the USXGMII word, except it only supports speeds up to + * 1Gbps. + */ +static void phylink_decode_usgmii_word(struct phylink_link_state *state, + uint16_t lpa) +{ + switch (lpa & MDIO_USXGMII_SPD_MASK) { + case MDIO_USXGMII_10: + state->speed = SPEED_10; + break; + case MDIO_USXGMII_100: + state->speed = SPEED_100; + break; + case MDIO_USXGMII_1000: + state->speed = SPEED_1000; + break; + default: + state->link = false; + return; + } + + if (lpa & MDIO_USXGMII_FULL_DUPLEX) + state->duplex = DUPLEX_FULL; + else + state->duplex = DUPLEX_HALF; +} + +/** + * phylink_mii_c22_pcs_decode_state() - Decode MAC PCS state from MII registers + * @state: a pointer to a &struct phylink_link_state. + * @bmsr: The value of the %MII_BMSR register + * @lpa: The value of the %MII_LPA register + * + * Helper for MAC PCS supporting the 802.3 clause 22 register set for + * clause 37 negotiation and/or SGMII control. + * + * Parse the Clause 37 or Cisco SGMII link partner negotiation word into + * the phylink @state structure. This is suitable to be used for implementing + * the pcs_get_state() member of the struct phylink_pcs_ops structure if + * accessing @bmsr and @lpa cannot be done with MDIO directly. + */ +void phylink_mii_c22_pcs_decode_state(struct phylink_link_state *state, + u16 bmsr, u16 lpa) +{ + state->link = !!(bmsr & BMSR_LSTATUS); + state->an_complete = !!(bmsr & BMSR_ANEGCOMPLETE); + /* If there is no link or autonegotiation is disabled, the LP advertisement + * data is not meaningful, so don't go any further. + */ + if (!state->link || !linkmode_test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, + state->advertising)) + return; + + switch (state->interface) { + case PHY_INTERFACE_MODE_1000BASEX: + phylink_decode_c37_word(state, lpa, SPEED_1000); + break; + + case PHY_INTERFACE_MODE_2500BASEX: + phylink_decode_c37_word(state, lpa, SPEED_2500); + break; + + case PHY_INTERFACE_MODE_SGMII: + case PHY_INTERFACE_MODE_QSGMII: + phylink_decode_sgmii_word(state, lpa); + break; + case PHY_INTERFACE_MODE_QUSGMII: + phylink_decode_usgmii_word(state, lpa); + break; + + default: + state->link = false; + break; + } +} +EXPORT_SYMBOL_GPL(phylink_mii_c22_pcs_decode_state); + +/** + * phylink_mii_c22_pcs_get_state() - read the MAC PCS state + * @pcs: a pointer to a &struct mdio_device. + * @state: a pointer to a &struct phylink_link_state. + * + * Helper for MAC PCS supporting the 802.3 clause 22 register set for + * clause 37 negotiation and/or SGMII control. + * + * Read the MAC PCS state from the MII device configured in @config and + * parse the Clause 37 or Cisco SGMII link partner negotiation word into + * the phylink @state structure. This is suitable to be directly plugged + * into the pcs_get_state() member of the struct phylink_pcs_ops + * structure. + */ +void phylink_mii_c22_pcs_get_state(struct mdio_device *pcs, + struct phylink_link_state *state) +{ + int bmsr, lpa; + + bmsr = mdiodev_read(pcs, MII_BMSR); + lpa = mdiodev_read(pcs, MII_LPA); + if (bmsr < 0 || lpa < 0) { + state->link = false; + return; + } + + phylink_mii_c22_pcs_decode_state(state, bmsr, lpa); +} +EXPORT_SYMBOL_GPL(phylink_mii_c22_pcs_get_state); + +/** + * phylink_mii_c22_pcs_encode_advertisement() - configure the clause 37 PCS + * advertisement + * @interface: the PHY interface mode being configured + * @advertising: the ethtool advertisement mask + * + * Helper for MAC PCS supporting the 802.3 clause 22 register set for + * clause 37 negotiation and/or SGMII control. + * + * Encode the clause 37 PCS advertisement as specified by @interface and + * @advertising. + * + * Return: The new value for @adv, or ``-EINVAL`` if it should not be changed. + */ +int phylink_mii_c22_pcs_encode_advertisement(phy_interface_t interface, + const unsigned long *advertising) +{ + u16 adv; + + switch (interface) { + case PHY_INTERFACE_MODE_1000BASEX: + case PHY_INTERFACE_MODE_2500BASEX: + adv = ADVERTISE_1000XFULL; + if (linkmode_test_bit(ETHTOOL_LINK_MODE_Pause_BIT, + advertising)) + adv |= ADVERTISE_1000XPAUSE; + if (linkmode_test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, + advertising)) + adv |= ADVERTISE_1000XPSE_ASYM; + return adv; + case PHY_INTERFACE_MODE_SGMII: + case PHY_INTERFACE_MODE_QSGMII: + return 0x0001; + default: + /* Nothing to do for other modes */ + return -EINVAL; + } +} +EXPORT_SYMBOL_GPL(phylink_mii_c22_pcs_encode_advertisement); + +/** + * phylink_mii_c22_pcs_config() - configure clause 22 PCS + * @pcs: a pointer to a &struct mdio_device. + * @interface: the PHY interface mode being configured + * @advertising: the ethtool advertisement mask + * @neg_mode: PCS negotiation mode + * + * Configure a Clause 22 PCS PHY with the appropriate negotiation + * parameters for the @mode, @interface and @advertising parameters. + * Returns negative error number on failure, zero if the advertisement + * has not changed, or positive if there is a change. + */ +int phylink_mii_c22_pcs_config(struct mdio_device *pcs, + phy_interface_t interface, + const unsigned long *advertising, + unsigned int neg_mode) +{ + bool changed = 0; + u16 bmcr; + int ret, adv; + + adv = phylink_mii_c22_pcs_encode_advertisement(interface, advertising); + if (adv >= 0) { + ret = mdiobus_modify_changed(pcs->bus, pcs->addr, + MII_ADVERTISE, 0xffff, adv); + if (ret < 0) + return ret; + changed = ret; + } + + if (neg_mode == PHYLINK_PCS_NEG_INBAND_ENABLED) + bmcr = BMCR_ANENABLE; + else + bmcr = 0; + + /* Configure the inband state. Ensure ISOLATE bit is disabled */ + ret = mdiodev_modify(pcs, MII_BMCR, BMCR_ANENABLE | BMCR_ISOLATE, bmcr); + if (ret < 0) + return ret; + + return changed; +} +EXPORT_SYMBOL_GPL(phylink_mii_c22_pcs_config); + +/** + * phylink_mii_c22_pcs_an_restart() - restart 802.3z autonegotiation + * @pcs: a pointer to a &struct mdio_device. + * + * Helper for MAC PCS supporting the 802.3 clause 22 register set for + * clause 37 negotiation. + * + * Restart the clause 37 negotiation with the link partner. This is + * suitable to be directly plugged into the pcs_get_state() member + * of the struct phylink_pcs_ops structure. + */ +void phylink_mii_c22_pcs_an_restart(struct mdio_device *pcs) +{ + int val = mdiodev_read(pcs, MII_BMCR); + + if (val >= 0) { + val |= BMCR_ANRESTART; + + mdiodev_write(pcs, MII_BMCR, val); + } +} +EXPORT_SYMBOL_GPL(phylink_mii_c22_pcs_an_restart); + +void phylink_mii_c45_pcs_get_state(struct mdio_device *pcs, + struct phylink_link_state *state) +{ + struct mii_bus *bus = pcs->bus; + int addr = pcs->addr; + int stat; + + stat = mdiobus_c45_read(bus, addr, MDIO_MMD_PCS, MDIO_STAT1); + if (stat < 0) { + state->link = false; + return; + } + + state->link = !!(stat & MDIO_STAT1_LSTATUS); + if (!state->link) + return; + + switch (state->interface) { + case PHY_INTERFACE_MODE_10GBASER: + state->speed = SPEED_10000; + state->duplex = DUPLEX_FULL; + break; + + default: + break; + } +} +EXPORT_SYMBOL_GPL(phylink_mii_c45_pcs_get_state); + +static int __init phylink_init(void) +{ + for (int i = 0; i < ARRAY_SIZE(phylink_sfp_interface_preference); ++i) + __set_bit(phylink_sfp_interface_preference[i], + phylink_sfp_interfaces); + + return 0; +} + +module_init(phylink_init); + +MODULE_LICENSE("GPL v2"); |