diff options
Diffstat (limited to 'drivers/net/phy/qcom')
| -rw-r--r-- | drivers/net/phy/qcom/Kconfig | 30 | ||||
| -rw-r--r-- | drivers/net/phy/qcom/Makefile | 6 | ||||
| -rw-r--r-- | drivers/net/phy/qcom/at803x.c | 1108 | ||||
| -rw-r--r-- | drivers/net/phy/qcom/qca807x.c | 849 | ||||
| -rw-r--r-- | drivers/net/phy/qcom/qca808x.c | 663 | ||||
| -rw-r--r-- | drivers/net/phy/qcom/qca83xx.c | 275 | ||||
| -rw-r--r-- | drivers/net/phy/qcom/qcom-phy-lib.c | 676 | ||||
| -rw-r--r-- | drivers/net/phy/qcom/qcom.h | 243 |
8 files changed, 3850 insertions, 0 deletions
diff --git a/drivers/net/phy/qcom/Kconfig b/drivers/net/phy/qcom/Kconfig new file mode 100644 index 0000000000..570626cc8e --- /dev/null +++ b/drivers/net/phy/qcom/Kconfig @@ -0,0 +1,30 @@ +# SPDX-License-Identifier: GPL-2.0-only +config QCOM_NET_PHYLIB + tristate + +config AT803X_PHY + tristate "Qualcomm Atheros AR803X PHYs" + select QCOM_NET_PHYLIB + depends on REGULATOR + help + Currently supports the AR8030, AR8031, AR8033, AR8035 model + +config QCA83XX_PHY + tristate "Qualcomm Atheros QCA833x PHYs" + select QCOM_NET_PHYLIB + help + Currently supports the internal QCA8337(Internal qca8k PHY) model + +config QCA808X_PHY + tristate "Qualcomm QCA808x PHYs" + select QCOM_NET_PHYLIB + help + Currently supports the QCA8081 model + +config QCA807X_PHY + tristate "Qualcomm QCA807x PHYs" + select QCOM_NET_PHYLIB + depends on OF_MDIO + help + Currently supports the Qualcomm QCA8072, QCA8075 and the PSGMII + control PHY. diff --git a/drivers/net/phy/qcom/Makefile b/drivers/net/phy/qcom/Makefile new file mode 100644 index 0000000000..f24fb550ba --- /dev/null +++ b/drivers/net/phy/qcom/Makefile @@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0 +obj-$(CONFIG_QCOM_NET_PHYLIB) += qcom-phy-lib.o +obj-$(CONFIG_AT803X_PHY) += at803x.o +obj-$(CONFIG_QCA83XX_PHY) += qca83xx.o +obj-$(CONFIG_QCA808X_PHY) += qca808x.o +obj-$(CONFIG_QCA807X_PHY) += qca807x.o diff --git a/drivers/net/phy/qcom/at803x.c b/drivers/net/phy/qcom/at803x.c new file mode 100644 index 0000000000..e79657f76b --- /dev/null +++ b/drivers/net/phy/qcom/at803x.c @@ -0,0 +1,1108 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * drivers/net/phy/at803x.c + * + * Driver for Qualcomm Atheros AR803x PHY + * + * Author: Matus Ujhelyi <ujhelyi.m@gmail.com> + */ + +#include <linux/phy.h> +#include <linux/module.h> +#include <linux/string.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/ethtool_netlink.h> +#include <linux/bitfield.h> +#include <linux/regulator/of_regulator.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/consumer.h> +#include <linux/of.h> +#include <linux/phylink.h> +#include <linux/sfp.h> +#include <dt-bindings/net/qca-ar803x.h> + +#include "qcom.h" + +#define AT803X_LED_CONTROL 0x18 + +#define AT803X_PHY_MMD3_WOL_CTRL 0x8012 +#define AT803X_WOL_EN BIT(5) + +#define AT803X_REG_CHIP_CONFIG 0x1f +#define AT803X_BT_BX_REG_SEL 0x8000 + +#define AT803X_MODE_CFG_MASK 0x0F +#define AT803X_MODE_CFG_BASET_RGMII 0x00 +#define AT803X_MODE_CFG_BASET_SGMII 0x01 +#define AT803X_MODE_CFG_BX1000_RGMII_50OHM 0x02 +#define AT803X_MODE_CFG_BX1000_RGMII_75OHM 0x03 +#define AT803X_MODE_CFG_BX1000_CONV_50OHM 0x04 +#define AT803X_MODE_CFG_BX1000_CONV_75OHM 0x05 +#define AT803X_MODE_CFG_FX100_RGMII_50OHM 0x06 +#define AT803X_MODE_CFG_FX100_CONV_50OHM 0x07 +#define AT803X_MODE_CFG_RGMII_AUTO_MDET 0x0B +#define AT803X_MODE_CFG_FX100_RGMII_75OHM 0x0E +#define AT803X_MODE_CFG_FX100_CONV_75OHM 0x0F + +#define AT803X_PSSR 0x11 /*PHY-Specific Status Register*/ +#define AT803X_PSSR_MR_AN_COMPLETE 0x0200 + +#define AT803X_DEBUG_REG_1F 0x1F +#define AT803X_DEBUG_PLL_ON BIT(2) +#define AT803X_DEBUG_RGMII_1V8 BIT(3) + +/* AT803x supports either the XTAL input pad, an internal PLL or the + * DSP as clock reference for the clock output pad. The XTAL reference + * is only used for 25 MHz output, all other frequencies need the PLL. + * The DSP as a clock reference is used in synchronous ethernet + * applications. + * + * By default the PLL is only enabled if there is a link. Otherwise + * the PHY will go into low power state and disabled the PLL. You can + * set the PLL_ON bit (see debug register 0x1f) to keep the PLL always + * enabled. + */ +#define AT803X_MMD7_CLK25M 0x8016 +#define AT803X_CLK_OUT_MASK GENMASK(4, 2) +#define AT803X_CLK_OUT_25MHZ_XTAL 0 +#define AT803X_CLK_OUT_25MHZ_DSP 1 +#define AT803X_CLK_OUT_50MHZ_PLL 2 +#define AT803X_CLK_OUT_50MHZ_DSP 3 +#define AT803X_CLK_OUT_62_5MHZ_PLL 4 +#define AT803X_CLK_OUT_62_5MHZ_DSP 5 +#define AT803X_CLK_OUT_125MHZ_PLL 6 +#define AT803X_CLK_OUT_125MHZ_DSP 7 + +/* The AR8035 has another mask which is compatible with the AR8031/AR8033 mask + * but doesn't support choosing between XTAL/PLL and DSP. + */ +#define AT8035_CLK_OUT_MASK GENMASK(4, 3) + +#define AT803X_CLK_OUT_STRENGTH_MASK GENMASK(8, 7) +#define AT803X_CLK_OUT_STRENGTH_FULL 0 +#define AT803X_CLK_OUT_STRENGTH_HALF 1 +#define AT803X_CLK_OUT_STRENGTH_QUARTER 2 + +#define AT803X_MMD3_SMARTEEE_CTL1 0x805b +#define AT803X_MMD3_SMARTEEE_CTL2 0x805c +#define AT803X_MMD3_SMARTEEE_CTL3 0x805d +#define AT803X_MMD3_SMARTEEE_CTL3_LPI_EN BIT(8) + +#define ATH9331_PHY_ID 0x004dd041 +#define ATH8030_PHY_ID 0x004dd076 +#define ATH8031_PHY_ID 0x004dd074 +#define ATH8032_PHY_ID 0x004dd023 +#define ATH8035_PHY_ID 0x004dd072 +#define AT8030_PHY_ID_MASK 0xffffffef + +#define QCA9561_PHY_ID 0x004dd042 + +#define AT803X_PAGE_FIBER 0 +#define AT803X_PAGE_COPPER 1 + +/* don't turn off internal PLL */ +#define AT803X_KEEP_PLL_ENABLED BIT(0) +#define AT803X_DISABLE_SMARTEEE BIT(1) + +/* disable hibernation mode */ +#define AT803X_DISABLE_HIBERNATION_MODE BIT(2) + +MODULE_DESCRIPTION("Qualcomm Atheros AR803x PHY driver"); +MODULE_AUTHOR("Matus Ujhelyi"); +MODULE_LICENSE("GPL"); + +struct at803x_priv { + int flags; + u16 clk_25m_reg; + u16 clk_25m_mask; + u8 smarteee_lpi_tw_1g; + u8 smarteee_lpi_tw_100m; + bool is_fiber; + bool is_1000basex; + struct regulator_dev *vddio_rdev; + struct regulator_dev *vddh_rdev; +}; + +struct at803x_context { + u16 bmcr; + u16 advertise; + u16 control1000; + u16 int_enable; + u16 smart_speed; + u16 led_control; +}; + +static int at803x_write_page(struct phy_device *phydev, int page) +{ + int mask; + int set; + + if (page == AT803X_PAGE_COPPER) { + set = AT803X_BT_BX_REG_SEL; + mask = 0; + } else { + set = 0; + mask = AT803X_BT_BX_REG_SEL; + } + + return __phy_modify(phydev, AT803X_REG_CHIP_CONFIG, mask, set); +} + +static int at803x_read_page(struct phy_device *phydev) +{ + int ccr = __phy_read(phydev, AT803X_REG_CHIP_CONFIG); + + if (ccr < 0) + return ccr; + + if (ccr & AT803X_BT_BX_REG_SEL) + return AT803X_PAGE_COPPER; + + return AT803X_PAGE_FIBER; +} + +static int at803x_enable_rx_delay(struct phy_device *phydev) +{ + return at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL, 0, + AT803X_DEBUG_RX_CLK_DLY_EN); +} + +static int at803x_enable_tx_delay(struct phy_device *phydev) +{ + return at803x_debug_reg_mask(phydev, AT803X_DEBUG_SYSTEM_CTRL_MODE, 0, + AT803X_DEBUG_TX_CLK_DLY_EN); +} + +static int at803x_disable_rx_delay(struct phy_device *phydev) +{ + return at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL, + AT803X_DEBUG_RX_CLK_DLY_EN, 0); +} + +static int at803x_disable_tx_delay(struct phy_device *phydev) +{ + return at803x_debug_reg_mask(phydev, AT803X_DEBUG_SYSTEM_CTRL_MODE, + AT803X_DEBUG_TX_CLK_DLY_EN, 0); +} + +/* save relevant PHY registers to private copy */ +static void at803x_context_save(struct phy_device *phydev, + struct at803x_context *context) +{ + context->bmcr = phy_read(phydev, MII_BMCR); + context->advertise = phy_read(phydev, MII_ADVERTISE); + context->control1000 = phy_read(phydev, MII_CTRL1000); + context->int_enable = phy_read(phydev, AT803X_INTR_ENABLE); + context->smart_speed = phy_read(phydev, AT803X_SMART_SPEED); + context->led_control = phy_read(phydev, AT803X_LED_CONTROL); +} + +/* restore relevant PHY registers from private copy */ +static void at803x_context_restore(struct phy_device *phydev, + const struct at803x_context *context) +{ + phy_write(phydev, MII_BMCR, context->bmcr); + phy_write(phydev, MII_ADVERTISE, context->advertise); + phy_write(phydev, MII_CTRL1000, context->control1000); + phy_write(phydev, AT803X_INTR_ENABLE, context->int_enable); + phy_write(phydev, AT803X_SMART_SPEED, context->smart_speed); + phy_write(phydev, AT803X_LED_CONTROL, context->led_control); +} + +static int at803x_suspend(struct phy_device *phydev) +{ + int value; + int wol_enabled; + + value = phy_read(phydev, AT803X_INTR_ENABLE); + wol_enabled = value & AT803X_INTR_ENABLE_WOL; + + if (wol_enabled) + value = BMCR_ISOLATE; + else + value = BMCR_PDOWN; + + phy_modify(phydev, MII_BMCR, 0, value); + + return 0; +} + +static int at803x_resume(struct phy_device *phydev) +{ + return phy_modify(phydev, MII_BMCR, BMCR_PDOWN | BMCR_ISOLATE, 0); +} + +static int at803x_parse_dt(struct phy_device *phydev) +{ + struct device_node *node = phydev->mdio.dev.of_node; + struct at803x_priv *priv = phydev->priv; + u32 freq, strength, tw; + unsigned int sel; + int ret; + + if (!IS_ENABLED(CONFIG_OF_MDIO)) + return 0; + + if (of_property_read_bool(node, "qca,disable-smarteee")) + priv->flags |= AT803X_DISABLE_SMARTEEE; + + if (of_property_read_bool(node, "qca,disable-hibernation-mode")) + priv->flags |= AT803X_DISABLE_HIBERNATION_MODE; + + if (!of_property_read_u32(node, "qca,smarteee-tw-us-1g", &tw)) { + if (!tw || tw > 255) { + phydev_err(phydev, "invalid qca,smarteee-tw-us-1g\n"); + return -EINVAL; + } + priv->smarteee_lpi_tw_1g = tw; + } + + if (!of_property_read_u32(node, "qca,smarteee-tw-us-100m", &tw)) { + if (!tw || tw > 255) { + phydev_err(phydev, "invalid qca,smarteee-tw-us-100m\n"); + return -EINVAL; + } + priv->smarteee_lpi_tw_100m = tw; + } + + ret = of_property_read_u32(node, "qca,clk-out-frequency", &freq); + if (!ret) { + switch (freq) { + case 25000000: + sel = AT803X_CLK_OUT_25MHZ_XTAL; + break; + case 50000000: + sel = AT803X_CLK_OUT_50MHZ_PLL; + break; + case 62500000: + sel = AT803X_CLK_OUT_62_5MHZ_PLL; + break; + case 125000000: + sel = AT803X_CLK_OUT_125MHZ_PLL; + break; + default: + phydev_err(phydev, "invalid qca,clk-out-frequency\n"); + return -EINVAL; + } + + priv->clk_25m_reg |= FIELD_PREP(AT803X_CLK_OUT_MASK, sel); + priv->clk_25m_mask |= AT803X_CLK_OUT_MASK; + } + + ret = of_property_read_u32(node, "qca,clk-out-strength", &strength); + if (!ret) { + priv->clk_25m_mask |= AT803X_CLK_OUT_STRENGTH_MASK; + switch (strength) { + case AR803X_STRENGTH_FULL: + priv->clk_25m_reg |= AT803X_CLK_OUT_STRENGTH_FULL; + break; + case AR803X_STRENGTH_HALF: + priv->clk_25m_reg |= AT803X_CLK_OUT_STRENGTH_HALF; + break; + case AR803X_STRENGTH_QUARTER: + priv->clk_25m_reg |= AT803X_CLK_OUT_STRENGTH_QUARTER; + break; + default: + phydev_err(phydev, "invalid qca,clk-out-strength\n"); + return -EINVAL; + } + } + + return 0; +} + +static int at803x_probe(struct phy_device *phydev) +{ + struct device *dev = &phydev->mdio.dev; + struct at803x_priv *priv; + int ret; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + phydev->priv = priv; + + ret = at803x_parse_dt(phydev); + if (ret) + return ret; + + return 0; +} + +static int at803x_get_features(struct phy_device *phydev) +{ + struct at803x_priv *priv = phydev->priv; + int err; + + err = genphy_read_abilities(phydev); + if (err) + return err; + + if (phydev->drv->phy_id != ATH8031_PHY_ID) + return 0; + + /* AR8031/AR8033 have different status registers + * for copper and fiber operation. However, the + * extended status register is the same for both + * operation modes. + * + * As a result of that, ESTATUS_1000_XFULL is set + * to 1 even when operating in copper TP mode. + * + * Remove this mode from the supported link modes + * when not operating in 1000BaseX mode. + */ + if (!priv->is_1000basex) + linkmode_clear_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT, + phydev->supported); + + return 0; +} + +static int at803x_smarteee_config(struct phy_device *phydev) +{ + struct at803x_priv *priv = phydev->priv; + u16 mask = 0, val = 0; + int ret; + + if (priv->flags & AT803X_DISABLE_SMARTEEE) + return phy_modify_mmd(phydev, MDIO_MMD_PCS, + AT803X_MMD3_SMARTEEE_CTL3, + AT803X_MMD3_SMARTEEE_CTL3_LPI_EN, 0); + + if (priv->smarteee_lpi_tw_1g) { + mask |= 0xff00; + val |= priv->smarteee_lpi_tw_1g << 8; + } + if (priv->smarteee_lpi_tw_100m) { + mask |= 0x00ff; + val |= priv->smarteee_lpi_tw_100m; + } + if (!mask) + return 0; + + ret = phy_modify_mmd(phydev, MDIO_MMD_PCS, AT803X_MMD3_SMARTEEE_CTL1, + mask, val); + if (ret) + return ret; + + return phy_modify_mmd(phydev, MDIO_MMD_PCS, AT803X_MMD3_SMARTEEE_CTL3, + AT803X_MMD3_SMARTEEE_CTL3_LPI_EN, + AT803X_MMD3_SMARTEEE_CTL3_LPI_EN); +} + +static int at803x_clk_out_config(struct phy_device *phydev) +{ + struct at803x_priv *priv = phydev->priv; + + if (!priv->clk_25m_mask) + return 0; + + return phy_modify_mmd(phydev, MDIO_MMD_AN, AT803X_MMD7_CLK25M, + priv->clk_25m_mask, priv->clk_25m_reg); +} + +static int at8031_pll_config(struct phy_device *phydev) +{ + struct at803x_priv *priv = phydev->priv; + + /* The default after hardware reset is PLL OFF. After a soft reset, the + * values are retained. + */ + if (priv->flags & AT803X_KEEP_PLL_ENABLED) + return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_1F, + 0, AT803X_DEBUG_PLL_ON); + else + return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_1F, + AT803X_DEBUG_PLL_ON, 0); +} + +static int at803x_hibernation_mode_config(struct phy_device *phydev) +{ + struct at803x_priv *priv = phydev->priv; + + /* The default after hardware reset is hibernation mode enabled. After + * software reset, the value is retained. + */ + if (!(priv->flags & AT803X_DISABLE_HIBERNATION_MODE)) + return 0; + + return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_HIB_CTRL, + AT803X_DEBUG_HIB_CTRL_PS_HIB_EN, 0); +} + +static int at803x_config_init(struct phy_device *phydev) +{ + int ret; + + /* The RX and TX delay default is: + * after HW reset: RX delay enabled and TX delay disabled + * after SW reset: RX delay enabled, while TX delay retains the + * value before reset. + */ + if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID || + phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) + ret = at803x_enable_rx_delay(phydev); + else + ret = at803x_disable_rx_delay(phydev); + if (ret < 0) + return ret; + + if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID || + phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) + ret = at803x_enable_tx_delay(phydev); + else + ret = at803x_disable_tx_delay(phydev); + if (ret < 0) + return ret; + + ret = at803x_smarteee_config(phydev); + if (ret < 0) + return ret; + + ret = at803x_clk_out_config(phydev); + if (ret < 0) + return ret; + + ret = at803x_hibernation_mode_config(phydev); + if (ret < 0) + return ret; + + /* Ar803x extended next page bit is enabled by default. Cisco + * multigig switches read this bit and attempt to negotiate 10Gbps + * rates even if the next page bit is disabled. This is incorrect + * behaviour but we still need to accommodate it. XNP is only needed + * for 10Gbps support, so disable XNP. + */ + return phy_modify(phydev, MII_ADVERTISE, MDIO_AN_CTRL1_XNP, 0); +} + +static void at803x_link_change_notify(struct phy_device *phydev) +{ + /* + * Conduct a hardware reset for AT8030 every time a link loss is + * signalled. This is necessary to circumvent a hardware bug that + * occurs when the cable is unplugged while TX packets are pending + * in the FIFO. In such cases, the FIFO enters an error mode it + * cannot recover from by software. + */ + if (phydev->state == PHY_NOLINK && phydev->mdio.reset_gpio) { + struct at803x_context context; + + at803x_context_save(phydev, &context); + + phy_device_reset(phydev, 1); + usleep_range(1000, 2000); + phy_device_reset(phydev, 0); + usleep_range(1000, 2000); + + at803x_context_restore(phydev, &context); + + phydev_dbg(phydev, "%s(): phy was reset\n", __func__); + } +} + +static int at803x_config_aneg(struct phy_device *phydev) +{ + struct at803x_priv *priv = phydev->priv; + int ret; + + ret = at803x_prepare_config_aneg(phydev); + if (ret) + return ret; + + if (priv->is_1000basex) + return genphy_c37_config_aneg(phydev); + + return genphy_config_aneg(phydev); +} + +static int at803x_cable_test_result_trans(u16 status) +{ + switch (FIELD_GET(AT803X_CDT_STATUS_STAT_MASK, status)) { + case AT803X_CDT_STATUS_STAT_NORMAL: + return ETHTOOL_A_CABLE_RESULT_CODE_OK; + case AT803X_CDT_STATUS_STAT_SHORT: + return ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT; + case AT803X_CDT_STATUS_STAT_OPEN: + return ETHTOOL_A_CABLE_RESULT_CODE_OPEN; + case AT803X_CDT_STATUS_STAT_FAIL: + default: + return ETHTOOL_A_CABLE_RESULT_CODE_UNSPEC; + } +} + +static bool at803x_cdt_test_failed(u16 status) +{ + return FIELD_GET(AT803X_CDT_STATUS_STAT_MASK, status) == + AT803X_CDT_STATUS_STAT_FAIL; +} + +static bool at803x_cdt_fault_length_valid(u16 status) +{ + switch (FIELD_GET(AT803X_CDT_STATUS_STAT_MASK, status)) { + case AT803X_CDT_STATUS_STAT_OPEN: + case AT803X_CDT_STATUS_STAT_SHORT: + return true; + } + return false; +} + +static int at803x_cable_test_one_pair(struct phy_device *phydev, int pair) +{ + static const int ethtool_pair[] = { + ETHTOOL_A_CABLE_PAIR_A, + ETHTOOL_A_CABLE_PAIR_B, + ETHTOOL_A_CABLE_PAIR_C, + ETHTOOL_A_CABLE_PAIR_D, + }; + int ret, val; + + val = FIELD_PREP(AT803X_CDT_MDI_PAIR_MASK, pair) | + AT803X_CDT_ENABLE_TEST; + ret = at803x_cdt_start(phydev, val); + if (ret) + return ret; + + ret = at803x_cdt_wait_for_completion(phydev, AT803X_CDT_ENABLE_TEST); + if (ret) + return ret; + + val = phy_read(phydev, AT803X_CDT_STATUS); + if (val < 0) + return val; + + if (at803x_cdt_test_failed(val)) + return 0; + + ethnl_cable_test_result(phydev, ethtool_pair[pair], + at803x_cable_test_result_trans(val)); + + if (at803x_cdt_fault_length_valid(val)) { + val = FIELD_GET(AT803X_CDT_STATUS_DELTA_TIME_MASK, val); + ethnl_cable_test_fault_length(phydev, ethtool_pair[pair], + at803x_cdt_fault_length(val)); + } + + return 1; +} + +static int at803x_cable_test_get_status(struct phy_device *phydev, + bool *finished, unsigned long pair_mask) +{ + int retries = 20; + int pair, ret; + + *finished = false; + + /* According to the datasheet the CDT can be performed when + * there is no link partner or when the link partner is + * auto-negotiating. Starting the test will restart the AN + * automatically. It seems that doing this repeatedly we will + * get a slot where our link partner won't disturb our + * measurement. + */ + while (pair_mask && retries--) { + for_each_set_bit(pair, &pair_mask, 4) { + ret = at803x_cable_test_one_pair(phydev, pair); + if (ret < 0) + return ret; + if (ret) + clear_bit(pair, &pair_mask); + } + if (pair_mask) + msleep(250); + } + + *finished = true; + + return 0; +} + +static void at803x_cable_test_autoneg(struct phy_device *phydev) +{ + /* Enable auto-negotiation, but advertise no capabilities, no link + * will be established. A restart of the auto-negotiation is not + * required, because the cable test will automatically break the link. + */ + phy_write(phydev, MII_BMCR, BMCR_ANENABLE); + phy_write(phydev, MII_ADVERTISE, ADVERTISE_CSMA); +} + +static int at803x_cable_test_start(struct phy_device *phydev) +{ + at803x_cable_test_autoneg(phydev); + /* we do all the (time consuming) work later */ + return 0; +} + +static int at8031_rgmii_reg_set_voltage_sel(struct regulator_dev *rdev, + unsigned int selector) +{ + struct phy_device *phydev = rdev_get_drvdata(rdev); + + if (selector) + return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_1F, + 0, AT803X_DEBUG_RGMII_1V8); + else + return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_1F, + AT803X_DEBUG_RGMII_1V8, 0); +} + +static int at8031_rgmii_reg_get_voltage_sel(struct regulator_dev *rdev) +{ + struct phy_device *phydev = rdev_get_drvdata(rdev); + int val; + + val = at803x_debug_reg_read(phydev, AT803X_DEBUG_REG_1F); + if (val < 0) + return val; + + return (val & AT803X_DEBUG_RGMII_1V8) ? 1 : 0; +} + +static const struct regulator_ops vddio_regulator_ops = { + .list_voltage = regulator_list_voltage_table, + .set_voltage_sel = at8031_rgmii_reg_set_voltage_sel, + .get_voltage_sel = at8031_rgmii_reg_get_voltage_sel, +}; + +static const unsigned int vddio_voltage_table[] = { + 1500000, + 1800000, +}; + +static const struct regulator_desc vddio_desc = { + .name = "vddio", + .of_match = of_match_ptr("vddio-regulator"), + .n_voltages = ARRAY_SIZE(vddio_voltage_table), + .volt_table = vddio_voltage_table, + .ops = &vddio_regulator_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, +}; + +static const struct regulator_ops vddh_regulator_ops = { +}; + +static const struct regulator_desc vddh_desc = { + .name = "vddh", + .of_match = of_match_ptr("vddh-regulator"), + .n_voltages = 1, + .fixed_uV = 2500000, + .ops = &vddh_regulator_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, +}; + +static int at8031_register_regulators(struct phy_device *phydev) +{ + struct at803x_priv *priv = phydev->priv; + struct device *dev = &phydev->mdio.dev; + struct regulator_config config = { }; + + config.dev = dev; + config.driver_data = phydev; + + priv->vddio_rdev = devm_regulator_register(dev, &vddio_desc, &config); + if (IS_ERR(priv->vddio_rdev)) { + phydev_err(phydev, "failed to register VDDIO regulator\n"); + return PTR_ERR(priv->vddio_rdev); + } + + priv->vddh_rdev = devm_regulator_register(dev, &vddh_desc, &config); + if (IS_ERR(priv->vddh_rdev)) { + phydev_err(phydev, "failed to register VDDH regulator\n"); + return PTR_ERR(priv->vddh_rdev); + } + + return 0; +} + +static int at8031_sfp_insert(void *upstream, const struct sfp_eeprom_id *id) +{ + struct phy_device *phydev = upstream; + __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_support); + __ETHTOOL_DECLARE_LINK_MODE_MASK(sfp_support); + DECLARE_PHY_INTERFACE_MASK(interfaces); + phy_interface_t iface; + + linkmode_zero(phy_support); + phylink_set(phy_support, 1000baseX_Full); + phylink_set(phy_support, 1000baseT_Full); + phylink_set(phy_support, Autoneg); + phylink_set(phy_support, Pause); + phylink_set(phy_support, Asym_Pause); + + linkmode_zero(sfp_support); + sfp_parse_support(phydev->sfp_bus, id, sfp_support, interfaces); + /* Some modules support 10G modes as well as others we support. + * Mask out non-supported modes so the correct interface is picked. + */ + linkmode_and(sfp_support, phy_support, sfp_support); + + if (linkmode_empty(sfp_support)) { + dev_err(&phydev->mdio.dev, "incompatible SFP module inserted\n"); + return -EINVAL; + } + + iface = sfp_select_interface(phydev->sfp_bus, sfp_support); + + /* Only 1000Base-X is supported by AR8031/8033 as the downstream SerDes + * interface for use with SFP modules. + * However, some copper modules detected as having a preferred SGMII + * interface do default to and function in 1000Base-X mode, so just + * print a warning and allow such modules, as they may have some chance + * of working. + */ + if (iface == PHY_INTERFACE_MODE_SGMII) + dev_warn(&phydev->mdio.dev, "module may not function if 1000Base-X not supported\n"); + else if (iface != PHY_INTERFACE_MODE_1000BASEX) + return -EINVAL; + + return 0; +} + +static const struct sfp_upstream_ops at8031_sfp_ops = { + .attach = phy_sfp_attach, + .detach = phy_sfp_detach, + .module_insert = at8031_sfp_insert, +}; + +static int at8031_parse_dt(struct phy_device *phydev) +{ + struct device_node *node = phydev->mdio.dev.of_node; + struct at803x_priv *priv = phydev->priv; + int ret; + + if (of_property_read_bool(node, "qca,keep-pll-enabled")) + priv->flags |= AT803X_KEEP_PLL_ENABLED; + + ret = at8031_register_regulators(phydev); + if (ret < 0) + return ret; + + ret = devm_regulator_get_enable_optional(&phydev->mdio.dev, + "vddio"); + if (ret) { + phydev_err(phydev, "failed to get VDDIO regulator\n"); + return ret; + } + + /* Only AR8031/8033 support 1000Base-X for SFP modules */ + return phy_sfp_probe(phydev, &at8031_sfp_ops); +} + +static int at8031_probe(struct phy_device *phydev) +{ + struct at803x_priv *priv; + int mode_cfg; + int ccr; + int ret; + + ret = at803x_probe(phydev); + if (ret) + return ret; + + priv = phydev->priv; + + /* Only supported on AR8031/AR8033, the AR8030/AR8035 use strapping + * options. + */ + ret = at8031_parse_dt(phydev); + if (ret) + return ret; + + ccr = phy_read(phydev, AT803X_REG_CHIP_CONFIG); + if (ccr < 0) + return ccr; + mode_cfg = ccr & AT803X_MODE_CFG_MASK; + + switch (mode_cfg) { + case AT803X_MODE_CFG_BX1000_RGMII_50OHM: + case AT803X_MODE_CFG_BX1000_RGMII_75OHM: + priv->is_1000basex = true; + fallthrough; + case AT803X_MODE_CFG_FX100_RGMII_50OHM: + case AT803X_MODE_CFG_FX100_RGMII_75OHM: + priv->is_fiber = true; + break; + } + + /* Disable WoL in 1588 register which is enabled + * by default + */ + return phy_modify_mmd(phydev, MDIO_MMD_PCS, + AT803X_PHY_MMD3_WOL_CTRL, + AT803X_WOL_EN, 0); +} + +static int at8031_config_init(struct phy_device *phydev) +{ + struct at803x_priv *priv = phydev->priv; + int ret; + + /* Some bootloaders leave the fiber page selected. + * Switch to the appropriate page (fiber or copper), as otherwise we + * read the PHY capabilities from the wrong page. + */ + phy_lock_mdio_bus(phydev); + ret = at803x_write_page(phydev, + priv->is_fiber ? AT803X_PAGE_FIBER : + AT803X_PAGE_COPPER); + phy_unlock_mdio_bus(phydev); + if (ret) + return ret; + + ret = at8031_pll_config(phydev); + if (ret < 0) + return ret; + + return at803x_config_init(phydev); +} + +static int at8031_set_wol(struct phy_device *phydev, + struct ethtool_wolinfo *wol) +{ + int ret; + + /* First setup MAC address and enable WOL interrupt */ + ret = at803x_set_wol(phydev, wol); + if (ret) + return ret; + + if (wol->wolopts & WAKE_MAGIC) + /* Enable WOL function for 1588 */ + ret = phy_modify_mmd(phydev, MDIO_MMD_PCS, + AT803X_PHY_MMD3_WOL_CTRL, + 0, AT803X_WOL_EN); + else + /* Disable WoL function for 1588 */ + ret = phy_modify_mmd(phydev, MDIO_MMD_PCS, + AT803X_PHY_MMD3_WOL_CTRL, + AT803X_WOL_EN, 0); + + return ret; +} + +static int at8031_config_intr(struct phy_device *phydev) +{ + struct at803x_priv *priv = phydev->priv; + int err, value = 0; + + if (phydev->interrupts == PHY_INTERRUPT_ENABLED && + priv->is_fiber) { + /* Clear any pending interrupts */ + err = at803x_ack_interrupt(phydev); + if (err) + return err; + + value |= AT803X_INTR_ENABLE_LINK_FAIL_BX; + value |= AT803X_INTR_ENABLE_LINK_SUCCESS_BX; + + err = phy_set_bits(phydev, AT803X_INTR_ENABLE, value); + if (err) + return err; + } + + return at803x_config_intr(phydev); +} + +/* AR8031 and AR8033 share the same read status logic */ +static int at8031_read_status(struct phy_device *phydev) +{ + struct at803x_priv *priv = phydev->priv; + bool changed; + + if (priv->is_1000basex) + return genphy_c37_read_status(phydev, &changed); + + return at803x_read_status(phydev); +} + +/* AR8031 and AR8035 share the same cable test get status reg */ +static int at8031_cable_test_get_status(struct phy_device *phydev, + bool *finished) +{ + return at803x_cable_test_get_status(phydev, finished, 0xf); +} + +/* AR8031 and AR8035 share the same cable test start logic */ +static int at8031_cable_test_start(struct phy_device *phydev) +{ + at803x_cable_test_autoneg(phydev); + phy_write(phydev, MII_CTRL1000, 0); + /* we do all the (time consuming) work later */ + return 0; +} + +/* AR8032, AR9331 and QCA9561 share the same cable test get status reg */ +static int at8032_cable_test_get_status(struct phy_device *phydev, + bool *finished) +{ + return at803x_cable_test_get_status(phydev, finished, 0x3); +} + +static int at8035_parse_dt(struct phy_device *phydev) +{ + struct at803x_priv *priv = phydev->priv; + + /* Mask is set by the generic at803x_parse_dt + * if property is set. Assume property is set + * with the mask not zero. + */ + if (priv->clk_25m_mask) { + /* Fixup for the AR8030/AR8035. This chip has another mask and + * doesn't support the DSP reference. Eg. the lowest bit of the + * mask. The upper two bits select the same frequencies. Mask + * the lowest bit here. + * + * Warning: + * There was no datasheet for the AR8030 available so this is + * just a guess. But the AR8035 is listed as pin compatible + * to the AR8030 so there might be a good chance it works on + * the AR8030 too. + */ + priv->clk_25m_reg &= AT8035_CLK_OUT_MASK; + priv->clk_25m_mask &= AT8035_CLK_OUT_MASK; + } + + return 0; +} + +/* AR8030 and AR8035 shared the same special mask for clk_25m */ +static int at8035_probe(struct phy_device *phydev) +{ + int ret; + + ret = at803x_probe(phydev); + if (ret) + return ret; + + return at8035_parse_dt(phydev); +} + +static struct phy_driver at803x_driver[] = { +{ + /* Qualcomm Atheros AR8035 */ + PHY_ID_MATCH_EXACT(ATH8035_PHY_ID), + .name = "Qualcomm Atheros AR8035", + .flags = PHY_POLL_CABLE_TEST, + .probe = at8035_probe, + .config_aneg = at803x_config_aneg, + .config_init = at803x_config_init, + .soft_reset = genphy_soft_reset, + .set_wol = at803x_set_wol, + .get_wol = at803x_get_wol, + .suspend = at803x_suspend, + .resume = at803x_resume, + /* PHY_GBIT_FEATURES */ + .read_status = at803x_read_status, + .config_intr = at803x_config_intr, + .handle_interrupt = at803x_handle_interrupt, + .get_tunable = at803x_get_tunable, + .set_tunable = at803x_set_tunable, + .cable_test_start = at8031_cable_test_start, + .cable_test_get_status = at8031_cable_test_get_status, +}, { + /* Qualcomm Atheros AR8030 */ + .phy_id = ATH8030_PHY_ID, + .name = "Qualcomm Atheros AR8030", + .phy_id_mask = AT8030_PHY_ID_MASK, + .probe = at8035_probe, + .config_init = at803x_config_init, + .link_change_notify = at803x_link_change_notify, + .set_wol = at803x_set_wol, + .get_wol = at803x_get_wol, + .suspend = at803x_suspend, + .resume = at803x_resume, + /* PHY_BASIC_FEATURES */ + .config_intr = at803x_config_intr, + .handle_interrupt = at803x_handle_interrupt, +}, { + /* Qualcomm Atheros AR8031/AR8033 */ + PHY_ID_MATCH_EXACT(ATH8031_PHY_ID), + .name = "Qualcomm Atheros AR8031/AR8033", + .flags = PHY_POLL_CABLE_TEST, + .probe = at8031_probe, + .config_init = at8031_config_init, + .config_aneg = at803x_config_aneg, + .soft_reset = genphy_soft_reset, + .set_wol = at8031_set_wol, + .get_wol = at803x_get_wol, + .suspend = at803x_suspend, + .resume = at803x_resume, + .read_page = at803x_read_page, + .write_page = at803x_write_page, + .get_features = at803x_get_features, + .read_status = at8031_read_status, + .config_intr = at8031_config_intr, + .handle_interrupt = at803x_handle_interrupt, + .get_tunable = at803x_get_tunable, + .set_tunable = at803x_set_tunable, + .cable_test_start = at8031_cable_test_start, + .cable_test_get_status = at8031_cable_test_get_status, +}, { + /* Qualcomm Atheros AR8032 */ + PHY_ID_MATCH_EXACT(ATH8032_PHY_ID), + .name = "Qualcomm Atheros AR8032", + .probe = at803x_probe, + .flags = PHY_POLL_CABLE_TEST, + .config_init = at803x_config_init, + .link_change_notify = at803x_link_change_notify, + .suspend = at803x_suspend, + .resume = at803x_resume, + /* PHY_BASIC_FEATURES */ + .config_intr = at803x_config_intr, + .handle_interrupt = at803x_handle_interrupt, + .cable_test_start = at803x_cable_test_start, + .cable_test_get_status = at8032_cable_test_get_status, +}, { + /* ATHEROS AR9331 */ + PHY_ID_MATCH_EXACT(ATH9331_PHY_ID), + .name = "Qualcomm Atheros AR9331 built-in PHY", + .probe = at803x_probe, + .suspend = at803x_suspend, + .resume = at803x_resume, + .flags = PHY_POLL_CABLE_TEST, + /* PHY_BASIC_FEATURES */ + .config_intr = at803x_config_intr, + .handle_interrupt = at803x_handle_interrupt, + .cable_test_start = at803x_cable_test_start, + .cable_test_get_status = at8032_cable_test_get_status, + .read_status = at803x_read_status, + .soft_reset = genphy_soft_reset, + .config_aneg = at803x_config_aneg, +}, { + /* Qualcomm Atheros QCA9561 */ + PHY_ID_MATCH_EXACT(QCA9561_PHY_ID), + .name = "Qualcomm Atheros QCA9561 built-in PHY", + .probe = at803x_probe, + .suspend = at803x_suspend, + .resume = at803x_resume, + .flags = PHY_POLL_CABLE_TEST, + /* PHY_BASIC_FEATURES */ + .config_intr = at803x_config_intr, + .handle_interrupt = at803x_handle_interrupt, + .cable_test_start = at803x_cable_test_start, + .cable_test_get_status = at8032_cable_test_get_status, + .read_status = at803x_read_status, + .soft_reset = genphy_soft_reset, + .config_aneg = at803x_config_aneg, +}, }; + +module_phy_driver(at803x_driver); + +static struct mdio_device_id __maybe_unused atheros_tbl[] = { + { ATH8030_PHY_ID, AT8030_PHY_ID_MASK }, + { PHY_ID_MATCH_EXACT(ATH8031_PHY_ID) }, + { PHY_ID_MATCH_EXACT(ATH8032_PHY_ID) }, + { PHY_ID_MATCH_EXACT(ATH8035_PHY_ID) }, + { PHY_ID_MATCH_EXACT(ATH9331_PHY_ID) }, + { PHY_ID_MATCH_EXACT(QCA9561_PHY_ID) }, + { } +}; + +MODULE_DEVICE_TABLE(mdio, atheros_tbl); diff --git a/drivers/net/phy/qcom/qca807x.c b/drivers/net/phy/qcom/qca807x.c new file mode 100644 index 0000000000..672c692911 --- /dev/null +++ b/drivers/net/phy/qcom/qca807x.c @@ -0,0 +1,849 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (c) 2023 Sartura Ltd. + * + * Author: Robert Marko <robert.marko@sartura.hr> + * Christian Marangi <ansuelsmth@gmail.com> + * + * Qualcomm QCA8072 and QCA8075 PHY driver + */ + +#include <linux/module.h> +#include <linux/of.h> +#include <linux/phy.h> +#include <linux/bitfield.h> +#include <linux/gpio/driver.h> +#include <linux/sfp.h> + +#include "qcom.h" + +#define QCA807X_CHIP_CONFIGURATION 0x1f +#define QCA807X_BT_BX_REG_SEL BIT(15) +#define QCA807X_BT_BX_REG_SEL_FIBER 0 +#define QCA807X_BT_BX_REG_SEL_COPPER 1 +#define QCA807X_CHIP_CONFIGURATION_MODE_CFG_MASK GENMASK(3, 0) +#define QCA807X_CHIP_CONFIGURATION_MODE_QSGMII_SGMII 4 +#define QCA807X_CHIP_CONFIGURATION_MODE_PSGMII_FIBER 3 +#define QCA807X_CHIP_CONFIGURATION_MODE_PSGMII_ALL_COPPER 0 + +#define QCA807X_MEDIA_SELECT_STATUS 0x1a +#define QCA807X_MEDIA_DETECTED_COPPER BIT(5) +#define QCA807X_MEDIA_DETECTED_1000_BASE_X BIT(4) +#define QCA807X_MEDIA_DETECTED_100_BASE_FX BIT(3) + +#define QCA807X_MMD7_FIBER_MODE_AUTO_DETECTION 0x807e +#define QCA807X_MMD7_FIBER_MODE_AUTO_DETECTION_EN BIT(0) + +#define QCA807X_MMD7_1000BASE_T_POWER_SAVE_PER_CABLE_LENGTH 0x801a +#define QCA807X_CONTROL_DAC_MASK GENMASK(2, 0) +/* List of tweaks enabled by this bit: + * - With both FULL amplitude and FULL bias current: bias current + * is set to half. + * - With only DSP amplitude: bias current is set to half and + * is set to 1/4 with cable < 10m. + * - With DSP bias current (included both DSP amplitude and + * DSP bias current): bias current is half the detected current + * with cable < 10m. + */ +#define QCA807X_CONTROL_DAC_BIAS_CURRENT_TWEAK BIT(2) +#define QCA807X_CONTROL_DAC_DSP_BIAS_CURRENT BIT(1) +#define QCA807X_CONTROL_DAC_DSP_AMPLITUDE BIT(0) + +#define QCA807X_MMD7_LED_100N_1 0x8074 +#define QCA807X_MMD7_LED_100N_2 0x8075 +#define QCA807X_MMD7_LED_1000N_1 0x8076 +#define QCA807X_MMD7_LED_1000N_2 0x8077 + +#define QCA807X_MMD7_LED_CTRL(x) (0x8074 + ((x) * 2)) +#define QCA807X_MMD7_LED_FORCE_CTRL(x) (0x8075 + ((x) * 2)) + +/* LED hw control pattern for fiber port */ +#define QCA807X_LED_FIBER_PATTERN_MASK GENMASK(11, 1) +#define QCA807X_LED_FIBER_TXACT_BLK_EN BIT(10) +#define QCA807X_LED_FIBER_RXACT_BLK_EN BIT(9) +#define QCA807X_LED_FIBER_FDX_ON_EN BIT(6) +#define QCA807X_LED_FIBER_HDX_ON_EN BIT(5) +#define QCA807X_LED_FIBER_1000BX_ON_EN BIT(2) +#define QCA807X_LED_FIBER_100FX_ON_EN BIT(1) + +/* Some device repurpose the LED as GPIO out */ +#define QCA807X_GPIO_FORCE_EN QCA808X_LED_FORCE_EN +#define QCA807X_GPIO_FORCE_MODE_MASK QCA808X_LED_FORCE_MODE_MASK + +#define QCA807X_FUNCTION_CONTROL 0x10 +#define QCA807X_FC_MDI_CROSSOVER_MODE_MASK GENMASK(6, 5) +#define QCA807X_FC_MDI_CROSSOVER_AUTO 3 +#define QCA807X_FC_MDI_CROSSOVER_MANUAL_MDIX 1 +#define QCA807X_FC_MDI_CROSSOVER_MANUAL_MDI 0 + +/* PQSGMII Analog PHY specific */ +#define PQSGMII_CTRL_REG 0x0 +#define PQSGMII_ANALOG_SW_RESET BIT(6) +#define PQSGMII_DRIVE_CONTROL_1 0xb +#define PQSGMII_TX_DRIVER_MASK GENMASK(7, 4) +#define PQSGMII_TX_DRIVER_140MV 0x0 +#define PQSGMII_TX_DRIVER_160MV 0x1 +#define PQSGMII_TX_DRIVER_180MV 0x2 +#define PQSGMII_TX_DRIVER_200MV 0x3 +#define PQSGMII_TX_DRIVER_220MV 0x4 +#define PQSGMII_TX_DRIVER_240MV 0x5 +#define PQSGMII_TX_DRIVER_260MV 0x6 +#define PQSGMII_TX_DRIVER_280MV 0x7 +#define PQSGMII_TX_DRIVER_300MV 0x8 +#define PQSGMII_TX_DRIVER_320MV 0x9 +#define PQSGMII_TX_DRIVER_400MV 0xa +#define PQSGMII_TX_DRIVER_500MV 0xb +#define PQSGMII_TX_DRIVER_600MV 0xc +#define PQSGMII_MODE_CTRL 0x6d +#define PQSGMII_MODE_CTRL_AZ_WORKAROUND_MASK BIT(0) +#define PQSGMII_MMD3_SERDES_CONTROL 0x805a + +#define PHY_ID_QCA8072 0x004dd0b2 +#define PHY_ID_QCA8075 0x004dd0b1 + +#define QCA807X_COMBO_ADDR_OFFSET 4 +#define QCA807X_PQSGMII_ADDR_OFFSET 5 +#define SERDES_RESET_SLEEP 100 + +enum qca807x_global_phy { + QCA807X_COMBO_ADDR = 4, + QCA807X_PQSGMII_ADDR = 5, +}; + +struct qca807x_shared_priv { + unsigned int package_mode; + u32 tx_drive_strength; +}; + +struct qca807x_gpio_priv { + struct phy_device *phy; +}; + +struct qca807x_priv { + bool dac_full_amplitude; + bool dac_full_bias_current; + bool dac_disable_bias_current_tweak; +}; + +static int qca807x_cable_test_start(struct phy_device *phydev) +{ + /* we do all the (time consuming) work later */ + return 0; +} + +static int qca807x_led_parse_netdev(struct phy_device *phydev, unsigned long rules, + u16 *offload_trigger) +{ + /* Parsing specific to netdev trigger */ + switch (phydev->port) { + case PORT_TP: + if (test_bit(TRIGGER_NETDEV_TX, &rules)) + *offload_trigger |= QCA808X_LED_TX_BLINK; + if (test_bit(TRIGGER_NETDEV_RX, &rules)) + *offload_trigger |= QCA808X_LED_RX_BLINK; + if (test_bit(TRIGGER_NETDEV_LINK_10, &rules)) + *offload_trigger |= QCA808X_LED_SPEED10_ON; + if (test_bit(TRIGGER_NETDEV_LINK_100, &rules)) + *offload_trigger |= QCA808X_LED_SPEED100_ON; + if (test_bit(TRIGGER_NETDEV_LINK_1000, &rules)) + *offload_trigger |= QCA808X_LED_SPEED1000_ON; + if (test_bit(TRIGGER_NETDEV_HALF_DUPLEX, &rules)) + *offload_trigger |= QCA808X_LED_HALF_DUPLEX_ON; + if (test_bit(TRIGGER_NETDEV_FULL_DUPLEX, &rules)) + *offload_trigger |= QCA808X_LED_FULL_DUPLEX_ON; + break; + case PORT_FIBRE: + if (test_bit(TRIGGER_NETDEV_TX, &rules)) + *offload_trigger |= QCA807X_LED_FIBER_TXACT_BLK_EN; + if (test_bit(TRIGGER_NETDEV_RX, &rules)) + *offload_trigger |= QCA807X_LED_FIBER_RXACT_BLK_EN; + if (test_bit(TRIGGER_NETDEV_LINK_100, &rules)) + *offload_trigger |= QCA807X_LED_FIBER_100FX_ON_EN; + if (test_bit(TRIGGER_NETDEV_LINK_1000, &rules)) + *offload_trigger |= QCA807X_LED_FIBER_1000BX_ON_EN; + if (test_bit(TRIGGER_NETDEV_HALF_DUPLEX, &rules)) + *offload_trigger |= QCA807X_LED_FIBER_HDX_ON_EN; + if (test_bit(TRIGGER_NETDEV_FULL_DUPLEX, &rules)) + *offload_trigger |= QCA807X_LED_FIBER_FDX_ON_EN; + break; + default: + return -EOPNOTSUPP; + } + + if (rules && !*offload_trigger) + return -EOPNOTSUPP; + + return 0; +} + +static int qca807x_led_hw_control_enable(struct phy_device *phydev, u8 index) +{ + u16 reg; + + if (index > 1) + return -EINVAL; + + reg = QCA807X_MMD7_LED_FORCE_CTRL(index); + return qca808x_led_reg_hw_control_enable(phydev, reg); +} + +static int qca807x_led_hw_is_supported(struct phy_device *phydev, u8 index, + unsigned long rules) +{ + u16 offload_trigger = 0; + + if (index > 1) + return -EINVAL; + + return qca807x_led_parse_netdev(phydev, rules, &offload_trigger); +} + +static int qca807x_led_hw_control_set(struct phy_device *phydev, u8 index, + unsigned long rules) +{ + u16 reg, mask, offload_trigger = 0; + int ret; + + if (index > 1) + return -EINVAL; + + ret = qca807x_led_parse_netdev(phydev, rules, &offload_trigger); + if (ret) + return ret; + + ret = qca807x_led_hw_control_enable(phydev, index); + if (ret) + return ret; + + switch (phydev->port) { + case PORT_TP: + reg = QCA807X_MMD7_LED_CTRL(index); + mask = QCA808X_LED_PATTERN_MASK; + break; + case PORT_FIBRE: + /* HW control pattern bits are in LED FORCE reg */ + reg = QCA807X_MMD7_LED_FORCE_CTRL(index); + mask = QCA807X_LED_FIBER_PATTERN_MASK; + break; + default: + return -EINVAL; + } + + return phy_modify_mmd(phydev, MDIO_MMD_AN, reg, mask, + offload_trigger); +} + +static bool qca807x_led_hw_control_status(struct phy_device *phydev, u8 index) +{ + u16 reg; + + if (index > 1) + return false; + + reg = QCA807X_MMD7_LED_FORCE_CTRL(index); + return qca808x_led_reg_hw_control_status(phydev, reg); +} + +static int qca807x_led_hw_control_get(struct phy_device *phydev, u8 index, + unsigned long *rules) +{ + u16 reg; + int val; + + if (index > 1) + return -EINVAL; + + /* Check if we have hw control enabled */ + if (qca807x_led_hw_control_status(phydev, index)) + return -EINVAL; + + /* Parsing specific to netdev trigger */ + switch (phydev->port) { + case PORT_TP: + reg = QCA807X_MMD7_LED_CTRL(index); + val = phy_read_mmd(phydev, MDIO_MMD_AN, reg); + if (val & QCA808X_LED_TX_BLINK) + set_bit(TRIGGER_NETDEV_TX, rules); + if (val & QCA808X_LED_RX_BLINK) + set_bit(TRIGGER_NETDEV_RX, rules); + if (val & QCA808X_LED_SPEED10_ON) + set_bit(TRIGGER_NETDEV_LINK_10, rules); + if (val & QCA808X_LED_SPEED100_ON) + set_bit(TRIGGER_NETDEV_LINK_100, rules); + if (val & QCA808X_LED_SPEED1000_ON) + set_bit(TRIGGER_NETDEV_LINK_1000, rules); + if (val & QCA808X_LED_HALF_DUPLEX_ON) + set_bit(TRIGGER_NETDEV_HALF_DUPLEX, rules); + if (val & QCA808X_LED_FULL_DUPLEX_ON) + set_bit(TRIGGER_NETDEV_FULL_DUPLEX, rules); + break; + case PORT_FIBRE: + /* HW control pattern bits are in LED FORCE reg */ + reg = QCA807X_MMD7_LED_FORCE_CTRL(index); + val = phy_read_mmd(phydev, MDIO_MMD_AN, reg); + if (val & QCA807X_LED_FIBER_TXACT_BLK_EN) + set_bit(TRIGGER_NETDEV_TX, rules); + if (val & QCA807X_LED_FIBER_RXACT_BLK_EN) + set_bit(TRIGGER_NETDEV_RX, rules); + if (val & QCA807X_LED_FIBER_100FX_ON_EN) + set_bit(TRIGGER_NETDEV_LINK_100, rules); + if (val & QCA807X_LED_FIBER_1000BX_ON_EN) + set_bit(TRIGGER_NETDEV_LINK_1000, rules); + if (val & QCA807X_LED_FIBER_HDX_ON_EN) + set_bit(TRIGGER_NETDEV_HALF_DUPLEX, rules); + if (val & QCA807X_LED_FIBER_FDX_ON_EN) + set_bit(TRIGGER_NETDEV_FULL_DUPLEX, rules); + break; + default: + return -EINVAL; + } + + return 0; +} + +static int qca807x_led_hw_control_reset(struct phy_device *phydev, u8 index) +{ + u16 reg, mask; + + if (index > 1) + return -EINVAL; + + switch (phydev->port) { + case PORT_TP: + reg = QCA807X_MMD7_LED_CTRL(index); + mask = QCA808X_LED_PATTERN_MASK; + break; + case PORT_FIBRE: + /* HW control pattern bits are in LED FORCE reg */ + reg = QCA807X_MMD7_LED_FORCE_CTRL(index); + mask = QCA807X_LED_FIBER_PATTERN_MASK; + break; + default: + return -EINVAL; + } + + return phy_clear_bits_mmd(phydev, MDIO_MMD_AN, reg, mask); +} + +static int qca807x_led_brightness_set(struct phy_device *phydev, + u8 index, enum led_brightness value) +{ + u16 reg; + int ret; + + if (index > 1) + return -EINVAL; + + /* If we are setting off the LED reset any hw control rule */ + if (!value) { + ret = qca807x_led_hw_control_reset(phydev, index); + if (ret) + return ret; + } + + reg = QCA807X_MMD7_LED_FORCE_CTRL(index); + return qca808x_led_reg_brightness_set(phydev, reg, value); +} + +static int qca807x_led_blink_set(struct phy_device *phydev, u8 index, + unsigned long *delay_on, + unsigned long *delay_off) +{ + u16 reg; + + if (index > 1) + return -EINVAL; + + reg = QCA807X_MMD7_LED_FORCE_CTRL(index); + return qca808x_led_reg_blink_set(phydev, reg, delay_on, delay_off); +} + +#ifdef CONFIG_GPIOLIB +static int qca807x_gpio_get_direction(struct gpio_chip *gc, unsigned int offset) +{ + return GPIO_LINE_DIRECTION_OUT; +} + +static int qca807x_gpio_get(struct gpio_chip *gc, unsigned int offset) +{ + struct qca807x_gpio_priv *priv = gpiochip_get_data(gc); + u16 reg; + int val; + + reg = QCA807X_MMD7_LED_FORCE_CTRL(offset); + val = phy_read_mmd(priv->phy, MDIO_MMD_AN, reg); + + return FIELD_GET(QCA807X_GPIO_FORCE_MODE_MASK, val); +} + +static void qca807x_gpio_set(struct gpio_chip *gc, unsigned int offset, int value) +{ + struct qca807x_gpio_priv *priv = gpiochip_get_data(gc); + u16 reg; + int val; + + reg = QCA807X_MMD7_LED_FORCE_CTRL(offset); + + val = phy_read_mmd(priv->phy, MDIO_MMD_AN, reg); + val &= ~QCA807X_GPIO_FORCE_MODE_MASK; + val |= QCA807X_GPIO_FORCE_EN; + val |= FIELD_PREP(QCA807X_GPIO_FORCE_MODE_MASK, value); + + phy_write_mmd(priv->phy, MDIO_MMD_AN, reg, val); +} + +static int qca807x_gpio_dir_out(struct gpio_chip *gc, unsigned int offset, int value) +{ + qca807x_gpio_set(gc, offset, value); + + return 0; +} + +static int qca807x_gpio(struct phy_device *phydev) +{ + struct device *dev = &phydev->mdio.dev; + struct qca807x_gpio_priv *priv; + struct gpio_chip *gc; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->phy = phydev; + + gc = devm_kzalloc(dev, sizeof(*gc), GFP_KERNEL); + if (!gc) + return -ENOMEM; + + gc->label = dev_name(dev); + gc->base = -1; + gc->ngpio = 2; + gc->parent = dev; + gc->owner = THIS_MODULE; + gc->can_sleep = true; + gc->get_direction = qca807x_gpio_get_direction; + gc->direction_output = qca807x_gpio_dir_out; + gc->get = qca807x_gpio_get; + gc->set = qca807x_gpio_set; + + return devm_gpiochip_add_data(dev, gc, priv); +} +#endif + +static int qca807x_read_fiber_status(struct phy_device *phydev) +{ + bool changed; + int ss, err; + + err = genphy_c37_read_status(phydev, &changed); + if (err || !changed) + return err; + + /* Read the QCA807x PHY-Specific Status register fiber page, + * which indicates the speed and duplex that the PHY is actually + * using, irrespective of whether we are in autoneg mode or not. + */ + ss = phy_read(phydev, AT803X_SPECIFIC_STATUS); + if (ss < 0) + return ss; + + phydev->speed = SPEED_UNKNOWN; + phydev->duplex = DUPLEX_UNKNOWN; + if (ss & AT803X_SS_SPEED_DUPLEX_RESOLVED) { + switch (FIELD_GET(AT803X_SS_SPEED_MASK, ss)) { + case AT803X_SS_SPEED_100: + phydev->speed = SPEED_100; + break; + case AT803X_SS_SPEED_1000: + phydev->speed = SPEED_1000; + break; + } + + if (ss & AT803X_SS_DUPLEX) + phydev->duplex = DUPLEX_FULL; + else + phydev->duplex = DUPLEX_HALF; + } + + return 0; +} + +static int qca807x_read_status(struct phy_device *phydev) +{ + if (linkmode_test_bit(ETHTOOL_LINK_MODE_FIBRE_BIT, phydev->supported)) { + switch (phydev->port) { + case PORT_FIBRE: + return qca807x_read_fiber_status(phydev); + case PORT_TP: + return at803x_read_status(phydev); + default: + return -EINVAL; + } + } + + return at803x_read_status(phydev); +} + +static int qca807x_phy_package_probe_once(struct phy_device *phydev) +{ + struct phy_package_shared *shared = phydev->shared; + struct qca807x_shared_priv *priv = shared->priv; + unsigned int tx_drive_strength; + const char *package_mode_name; + + /* Default to 600mw if not defined */ + if (of_property_read_u32(shared->np, "qcom,tx-drive-strength-milliwatt", + &tx_drive_strength)) + tx_drive_strength = 600; + + switch (tx_drive_strength) { + case 140: + priv->tx_drive_strength = PQSGMII_TX_DRIVER_140MV; + break; + case 160: + priv->tx_drive_strength = PQSGMII_TX_DRIVER_160MV; + break; + case 180: + priv->tx_drive_strength = PQSGMII_TX_DRIVER_180MV; + break; + case 200: + priv->tx_drive_strength = PQSGMII_TX_DRIVER_200MV; + break; + case 220: + priv->tx_drive_strength = PQSGMII_TX_DRIVER_220MV; + break; + case 240: + priv->tx_drive_strength = PQSGMII_TX_DRIVER_240MV; + break; + case 260: + priv->tx_drive_strength = PQSGMII_TX_DRIVER_260MV; + break; + case 280: + priv->tx_drive_strength = PQSGMII_TX_DRIVER_280MV; + break; + case 300: + priv->tx_drive_strength = PQSGMII_TX_DRIVER_300MV; + break; + case 320: + priv->tx_drive_strength = PQSGMII_TX_DRIVER_320MV; + break; + case 400: + priv->tx_drive_strength = PQSGMII_TX_DRIVER_400MV; + break; + case 500: + priv->tx_drive_strength = PQSGMII_TX_DRIVER_500MV; + break; + case 600: + priv->tx_drive_strength = PQSGMII_TX_DRIVER_600MV; + break; + default: + return -EINVAL; + } + + priv->package_mode = PHY_INTERFACE_MODE_NA; + if (!of_property_read_string(shared->np, "qcom,package-mode", + &package_mode_name)) { + if (!strcasecmp(package_mode_name, + phy_modes(PHY_INTERFACE_MODE_PSGMII))) + priv->package_mode = PHY_INTERFACE_MODE_PSGMII; + else if (!strcasecmp(package_mode_name, + phy_modes(PHY_INTERFACE_MODE_QSGMII))) + priv->package_mode = PHY_INTERFACE_MODE_QSGMII; + else + return -EINVAL; + } + + return 0; +} + +static int qca807x_phy_package_config_init_once(struct phy_device *phydev) +{ + struct phy_package_shared *shared = phydev->shared; + struct qca807x_shared_priv *priv = shared->priv; + int val, ret; + + /* Make sure PHY follow PHY package mode if enforced */ + if (priv->package_mode != PHY_INTERFACE_MODE_NA && + phydev->interface != priv->package_mode) + return -EINVAL; + + phy_lock_mdio_bus(phydev); + + /* Set correct PHY package mode */ + val = __phy_package_read(phydev, QCA807X_COMBO_ADDR, + QCA807X_CHIP_CONFIGURATION); + val &= ~QCA807X_CHIP_CONFIGURATION_MODE_CFG_MASK; + /* package_mode can be QSGMII or PSGMII and we validate + * this in probe_once. + * With package_mode to NA, we default to PSGMII. + */ + switch (priv->package_mode) { + case PHY_INTERFACE_MODE_QSGMII: + val |= QCA807X_CHIP_CONFIGURATION_MODE_QSGMII_SGMII; + break; + case PHY_INTERFACE_MODE_PSGMII: + default: + val |= QCA807X_CHIP_CONFIGURATION_MODE_PSGMII_ALL_COPPER; + } + ret = __phy_package_write(phydev, QCA807X_COMBO_ADDR, + QCA807X_CHIP_CONFIGURATION, val); + if (ret) + goto exit; + + /* After mode change Serdes reset is required */ + val = __phy_package_read(phydev, QCA807X_PQSGMII_ADDR, + PQSGMII_CTRL_REG); + val &= ~PQSGMII_ANALOG_SW_RESET; + ret = __phy_package_write(phydev, QCA807X_PQSGMII_ADDR, + PQSGMII_CTRL_REG, val); + if (ret) + goto exit; + + msleep(SERDES_RESET_SLEEP); + + val = __phy_package_read(phydev, QCA807X_PQSGMII_ADDR, + PQSGMII_CTRL_REG); + val |= PQSGMII_ANALOG_SW_RESET; + ret = __phy_package_write(phydev, QCA807X_PQSGMII_ADDR, + PQSGMII_CTRL_REG, val); + if (ret) + goto exit; + + /* Workaround to enable AZ transmitting ability */ + val = __phy_package_read_mmd(phydev, QCA807X_PQSGMII_ADDR, + MDIO_MMD_PMAPMD, PQSGMII_MODE_CTRL); + val &= ~PQSGMII_MODE_CTRL_AZ_WORKAROUND_MASK; + ret = __phy_package_write_mmd(phydev, QCA807X_PQSGMII_ADDR, + MDIO_MMD_PMAPMD, PQSGMII_MODE_CTRL, val); + if (ret) + goto exit; + + /* Set PQSGMII TX AMP strength */ + val = __phy_package_read(phydev, QCA807X_PQSGMII_ADDR, + PQSGMII_DRIVE_CONTROL_1); + val &= ~PQSGMII_TX_DRIVER_MASK; + val |= FIELD_PREP(PQSGMII_TX_DRIVER_MASK, priv->tx_drive_strength); + ret = __phy_package_write(phydev, QCA807X_PQSGMII_ADDR, + PQSGMII_DRIVE_CONTROL_1, val); + if (ret) + goto exit; + + /* Prevent PSGMII going into hibernation via PSGMII self test */ + val = __phy_package_read_mmd(phydev, QCA807X_COMBO_ADDR, + MDIO_MMD_PCS, PQSGMII_MMD3_SERDES_CONTROL); + val &= ~BIT(1); + ret = __phy_package_write_mmd(phydev, QCA807X_COMBO_ADDR, + MDIO_MMD_PCS, PQSGMII_MMD3_SERDES_CONTROL, val); + +exit: + phy_unlock_mdio_bus(phydev); + + return ret; +} + +static int qca807x_sfp_insert(void *upstream, const struct sfp_eeprom_id *id) +{ + struct phy_device *phydev = upstream; + __ETHTOOL_DECLARE_LINK_MODE_MASK(support) = { 0, }; + phy_interface_t iface; + int ret; + DECLARE_PHY_INTERFACE_MASK(interfaces); + + sfp_parse_support(phydev->sfp_bus, id, support, interfaces); + iface = sfp_select_interface(phydev->sfp_bus, support); + + dev_info(&phydev->mdio.dev, "%s SFP module inserted\n", phy_modes(iface)); + + switch (iface) { + case PHY_INTERFACE_MODE_1000BASEX: + case PHY_INTERFACE_MODE_100BASEX: + /* Set PHY mode to PSGMII combo (1/4 copper + combo ports) mode */ + ret = phy_modify(phydev, + QCA807X_CHIP_CONFIGURATION, + QCA807X_CHIP_CONFIGURATION_MODE_CFG_MASK, + QCA807X_CHIP_CONFIGURATION_MODE_PSGMII_FIBER); + /* Enable fiber mode autodection (1000Base-X or 100Base-FX) */ + ret = phy_set_bits_mmd(phydev, + MDIO_MMD_AN, + QCA807X_MMD7_FIBER_MODE_AUTO_DETECTION, + QCA807X_MMD7_FIBER_MODE_AUTO_DETECTION_EN); + /* Select fiber page */ + ret = phy_clear_bits(phydev, + QCA807X_CHIP_CONFIGURATION, + QCA807X_BT_BX_REG_SEL); + + phydev->port = PORT_FIBRE; + break; + default: + dev_err(&phydev->mdio.dev, "Incompatible SFP module inserted\n"); + return -EINVAL; + } + + return ret; +} + +static void qca807x_sfp_remove(void *upstream) +{ + struct phy_device *phydev = upstream; + + /* Select copper page */ + phy_set_bits(phydev, + QCA807X_CHIP_CONFIGURATION, + QCA807X_BT_BX_REG_SEL); + + phydev->port = PORT_TP; +} + +static const struct sfp_upstream_ops qca807x_sfp_ops = { + .attach = phy_sfp_attach, + .detach = phy_sfp_detach, + .module_insert = qca807x_sfp_insert, + .module_remove = qca807x_sfp_remove, +}; + +static int qca807x_probe(struct phy_device *phydev) +{ + struct device_node *node = phydev->mdio.dev.of_node; + struct qca807x_shared_priv *shared_priv; + struct device *dev = &phydev->mdio.dev; + struct phy_package_shared *shared; + struct qca807x_priv *priv; + int ret; + + ret = devm_of_phy_package_join(dev, phydev, sizeof(*shared_priv)); + if (ret) + return ret; + + if (phy_package_probe_once(phydev)) { + ret = qca807x_phy_package_probe_once(phydev); + if (ret) + return ret; + } + + shared = phydev->shared; + shared_priv = shared->priv; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->dac_full_amplitude = of_property_read_bool(node, "qcom,dac-full-amplitude"); + priv->dac_full_bias_current = of_property_read_bool(node, "qcom,dac-full-bias-current"); + priv->dac_disable_bias_current_tweak = of_property_read_bool(node, + "qcom,dac-disable-bias-current-tweak"); + +#if IS_ENABLED(CONFIG_GPIOLIB) + /* Make sure we don't have mixed leds node and gpio-controller + * to prevent registering leds and having gpio-controller usage + * conflicting with them. + */ + if (of_find_property(node, "leds", NULL) && + of_find_property(node, "gpio-controller", NULL)) { + phydev_err(phydev, "Invalid property detected. LEDs and gpio-controller are mutually exclusive."); + return -EINVAL; + } + + /* Do not register a GPIO controller unless flagged for it */ + if (of_property_read_bool(node, "gpio-controller")) { + ret = qca807x_gpio(phydev); + if (ret) + return ret; + } +#endif + + /* Attach SFP bus on combo port*/ + if (phy_read(phydev, QCA807X_CHIP_CONFIGURATION)) { + ret = phy_sfp_probe(phydev, &qca807x_sfp_ops); + if (ret) + return ret; + linkmode_set_bit(ETHTOOL_LINK_MODE_FIBRE_BIT, phydev->supported); + linkmode_set_bit(ETHTOOL_LINK_MODE_FIBRE_BIT, phydev->advertising); + } + + phydev->priv = priv; + + return 0; +} + +static int qca807x_config_init(struct phy_device *phydev) +{ + struct qca807x_priv *priv = phydev->priv; + u16 control_dac; + int ret; + + if (phy_package_init_once(phydev)) { + ret = qca807x_phy_package_config_init_once(phydev); + if (ret) + return ret; + } + + control_dac = phy_read_mmd(phydev, MDIO_MMD_AN, + QCA807X_MMD7_1000BASE_T_POWER_SAVE_PER_CABLE_LENGTH); + control_dac &= ~QCA807X_CONTROL_DAC_MASK; + if (!priv->dac_full_amplitude) + control_dac |= QCA807X_CONTROL_DAC_DSP_AMPLITUDE; + if (!priv->dac_full_amplitude) + control_dac |= QCA807X_CONTROL_DAC_DSP_BIAS_CURRENT; + if (!priv->dac_disable_bias_current_tweak) + control_dac |= QCA807X_CONTROL_DAC_BIAS_CURRENT_TWEAK; + return phy_write_mmd(phydev, MDIO_MMD_AN, + QCA807X_MMD7_1000BASE_T_POWER_SAVE_PER_CABLE_LENGTH, + control_dac); +} + +static struct phy_driver qca807x_drivers[] = { + { + PHY_ID_MATCH_EXACT(PHY_ID_QCA8072), + .name = "Qualcomm QCA8072", + .flags = PHY_POLL_CABLE_TEST, + /* PHY_GBIT_FEATURES */ + .probe = qca807x_probe, + .config_init = qca807x_config_init, + .read_status = qca807x_read_status, + .config_intr = at803x_config_intr, + .handle_interrupt = at803x_handle_interrupt, + .soft_reset = genphy_soft_reset, + .get_tunable = at803x_get_tunable, + .set_tunable = at803x_set_tunable, + .resume = genphy_resume, + .suspend = genphy_suspend, + .cable_test_start = qca807x_cable_test_start, + .cable_test_get_status = qca808x_cable_test_get_status, + }, + { + PHY_ID_MATCH_EXACT(PHY_ID_QCA8075), + .name = "Qualcomm QCA8075", + .flags = PHY_POLL_CABLE_TEST, + /* PHY_GBIT_FEATURES */ + .probe = qca807x_probe, + .config_init = qca807x_config_init, + .read_status = qca807x_read_status, + .config_intr = at803x_config_intr, + .handle_interrupt = at803x_handle_interrupt, + .soft_reset = genphy_soft_reset, + .get_tunable = at803x_get_tunable, + .set_tunable = at803x_set_tunable, + .resume = genphy_resume, + .suspend = genphy_suspend, + .cable_test_start = qca807x_cable_test_start, + .cable_test_get_status = qca808x_cable_test_get_status, + .led_brightness_set = qca807x_led_brightness_set, + .led_blink_set = qca807x_led_blink_set, + .led_hw_is_supported = qca807x_led_hw_is_supported, + .led_hw_control_set = qca807x_led_hw_control_set, + .led_hw_control_get = qca807x_led_hw_control_get, + }, +}; +module_phy_driver(qca807x_drivers); + +static struct mdio_device_id __maybe_unused qca807x_tbl[] = { + { PHY_ID_MATCH_EXACT(PHY_ID_QCA8072) }, + { PHY_ID_MATCH_EXACT(PHY_ID_QCA8075) }, + { } +}; + +MODULE_AUTHOR("Robert Marko <robert.marko@sartura.hr>"); +MODULE_AUTHOR("Christian Marangi <ansuelsmth@gmail.com>"); +MODULE_DESCRIPTION("Qualcomm QCA807x PHY driver"); +MODULE_DEVICE_TABLE(mdio, qca807x_tbl); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/phy/qcom/qca808x.c b/drivers/net/phy/qcom/qca808x.c new file mode 100644 index 0000000000..5048304ccc --- /dev/null +++ b/drivers/net/phy/qcom/qca808x.c @@ -0,0 +1,663 @@ +// SPDX-License-Identifier: GPL-2.0+ + +#include <linux/phy.h> +#include <linux/module.h> + +#include "qcom.h" + +/* ADC threshold */ +#define QCA808X_PHY_DEBUG_ADC_THRESHOLD 0x2c80 +#define QCA808X_ADC_THRESHOLD_MASK GENMASK(7, 0) +#define QCA808X_ADC_THRESHOLD_80MV 0 +#define QCA808X_ADC_THRESHOLD_100MV 0xf0 +#define QCA808X_ADC_THRESHOLD_200MV 0x0f +#define QCA808X_ADC_THRESHOLD_300MV 0xff + +/* CLD control */ +#define QCA808X_PHY_MMD3_ADDR_CLD_CTRL7 0x8007 +#define QCA808X_8023AZ_AFE_CTRL_MASK GENMASK(8, 4) +#define QCA808X_8023AZ_AFE_EN 0x90 + +/* AZ control */ +#define QCA808X_PHY_MMD3_AZ_TRAINING_CTRL 0x8008 +#define QCA808X_MMD3_AZ_TRAINING_VAL 0x1c32 + +#define QCA808X_PHY_MMD1_MSE_THRESHOLD_20DB 0x8014 +#define QCA808X_MSE_THRESHOLD_20DB_VALUE 0x529 + +#define QCA808X_PHY_MMD1_MSE_THRESHOLD_17DB 0x800E +#define QCA808X_MSE_THRESHOLD_17DB_VALUE 0x341 + +#define QCA808X_PHY_MMD1_MSE_THRESHOLD_27DB 0x801E +#define QCA808X_MSE_THRESHOLD_27DB_VALUE 0x419 + +#define QCA808X_PHY_MMD1_MSE_THRESHOLD_28DB 0x8020 +#define QCA808X_MSE_THRESHOLD_28DB_VALUE 0x341 + +#define QCA808X_PHY_MMD7_TOP_OPTION1 0x901c +#define QCA808X_TOP_OPTION1_DATA 0x0 + +#define QCA808X_PHY_MMD3_DEBUG_1 0xa100 +#define QCA808X_MMD3_DEBUG_1_VALUE 0x9203 +#define QCA808X_PHY_MMD3_DEBUG_2 0xa101 +#define QCA808X_MMD3_DEBUG_2_VALUE 0x48ad +#define QCA808X_PHY_MMD3_DEBUG_3 0xa103 +#define QCA808X_MMD3_DEBUG_3_VALUE 0x1698 +#define QCA808X_PHY_MMD3_DEBUG_4 0xa105 +#define QCA808X_MMD3_DEBUG_4_VALUE 0x8001 +#define QCA808X_PHY_MMD3_DEBUG_5 0xa106 +#define QCA808X_MMD3_DEBUG_5_VALUE 0x1111 +#define QCA808X_PHY_MMD3_DEBUG_6 0xa011 +#define QCA808X_MMD3_DEBUG_6_VALUE 0x5f85 + +/* master/slave seed config */ +#define QCA808X_PHY_DEBUG_LOCAL_SEED 9 +#define QCA808X_MASTER_SLAVE_SEED_ENABLE BIT(1) +#define QCA808X_MASTER_SLAVE_SEED_CFG GENMASK(12, 2) +#define QCA808X_MASTER_SLAVE_SEED_RANGE 0x32 + +/* Hibernation yields lower power consumpiton in contrast with normal operation mode. + * when the copper cable is unplugged, the PHY enters into hibernation mode in about 10s. + */ +#define QCA808X_DBG_AN_TEST 0xb +#define QCA808X_HIBERNATION_EN BIT(15) + +#define QCA808X_MMD7_LED2_CTRL 0x8074 +#define QCA808X_MMD7_LED2_FORCE_CTRL 0x8075 +#define QCA808X_MMD7_LED1_CTRL 0x8076 +#define QCA808X_MMD7_LED1_FORCE_CTRL 0x8077 +#define QCA808X_MMD7_LED0_CTRL 0x8078 +#define QCA808X_MMD7_LED_CTRL(x) (0x8078 - ((x) * 2)) + +#define QCA808X_MMD7_LED0_FORCE_CTRL 0x8079 +#define QCA808X_MMD7_LED_FORCE_CTRL(x) (0x8079 - ((x) * 2)) + +#define QCA808X_MMD7_LED_POLARITY_CTRL 0x901a +/* QSDK sets by default 0x46 to this reg that sets BIT 6 for + * LED to active high. It's not clear what BIT 3 and BIT 4 does. + */ +#define QCA808X_LED_ACTIVE_HIGH BIT(6) + +/* QCA808X 1G chip type */ +#define QCA808X_PHY_MMD7_CHIP_TYPE 0x901d +#define QCA808X_PHY_CHIP_TYPE_1G BIT(0) + +#define QCA8081_PHY_SERDES_MMD1_FIFO_CTRL 0x9072 +#define QCA8081_PHY_FIFO_RSTN BIT(11) + +#define QCA8081_PHY_ID 0x004dd101 + +MODULE_DESCRIPTION("Qualcomm Atheros QCA808X PHY driver"); +MODULE_AUTHOR("Matus Ujhelyi"); +MODULE_LICENSE("GPL"); + +struct qca808x_priv { + int led_polarity_mode; +}; + +static int qca808x_phy_fast_retrain_config(struct phy_device *phydev) +{ + int ret; + + /* Enable fast retrain */ + ret = genphy_c45_fast_retrain(phydev, true); + if (ret) + return ret; + + phy_write_mmd(phydev, MDIO_MMD_AN, QCA808X_PHY_MMD7_TOP_OPTION1, + QCA808X_TOP_OPTION1_DATA); + phy_write_mmd(phydev, MDIO_MMD_PMAPMD, QCA808X_PHY_MMD1_MSE_THRESHOLD_20DB, + QCA808X_MSE_THRESHOLD_20DB_VALUE); + phy_write_mmd(phydev, MDIO_MMD_PMAPMD, QCA808X_PHY_MMD1_MSE_THRESHOLD_17DB, + QCA808X_MSE_THRESHOLD_17DB_VALUE); + phy_write_mmd(phydev, MDIO_MMD_PMAPMD, QCA808X_PHY_MMD1_MSE_THRESHOLD_27DB, + QCA808X_MSE_THRESHOLD_27DB_VALUE); + phy_write_mmd(phydev, MDIO_MMD_PMAPMD, QCA808X_PHY_MMD1_MSE_THRESHOLD_28DB, + QCA808X_MSE_THRESHOLD_28DB_VALUE); + phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_1, + QCA808X_MMD3_DEBUG_1_VALUE); + phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_4, + QCA808X_MMD3_DEBUG_4_VALUE); + phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_5, + QCA808X_MMD3_DEBUG_5_VALUE); + phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_3, + QCA808X_MMD3_DEBUG_3_VALUE); + phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_6, + QCA808X_MMD3_DEBUG_6_VALUE); + phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_2, + QCA808X_MMD3_DEBUG_2_VALUE); + + return 0; +} + +static int qca808x_phy_ms_seed_enable(struct phy_device *phydev, bool enable) +{ + u16 seed_value; + + if (!enable) + return at803x_debug_reg_mask(phydev, QCA808X_PHY_DEBUG_LOCAL_SEED, + QCA808X_MASTER_SLAVE_SEED_ENABLE, 0); + + seed_value = get_random_u32_below(QCA808X_MASTER_SLAVE_SEED_RANGE); + return at803x_debug_reg_mask(phydev, QCA808X_PHY_DEBUG_LOCAL_SEED, + QCA808X_MASTER_SLAVE_SEED_CFG | QCA808X_MASTER_SLAVE_SEED_ENABLE, + FIELD_PREP(QCA808X_MASTER_SLAVE_SEED_CFG, seed_value) | + QCA808X_MASTER_SLAVE_SEED_ENABLE); +} + +static bool qca808x_is_prefer_master(struct phy_device *phydev) +{ + return (phydev->master_slave_get == MASTER_SLAVE_CFG_MASTER_FORCE) || + (phydev->master_slave_get == MASTER_SLAVE_CFG_MASTER_PREFERRED); +} + +static bool qca808x_has_fast_retrain_or_slave_seed(struct phy_device *phydev) +{ + return linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->supported); +} + +static bool qca808x_is_1g_only(struct phy_device *phydev) +{ + int ret; + + ret = phy_read_mmd(phydev, MDIO_MMD_AN, QCA808X_PHY_MMD7_CHIP_TYPE); + if (ret < 0) + return true; + + return !!(QCA808X_PHY_CHIP_TYPE_1G & ret); +} + +static void qca808x_fill_possible_interfaces(struct phy_device *phydev) +{ + unsigned long *possible = phydev->possible_interfaces; + + __set_bit(PHY_INTERFACE_MODE_SGMII, possible); + + if (!qca808x_is_1g_only(phydev)) + __set_bit(PHY_INTERFACE_MODE_2500BASEX, possible); +} + +static int qca808x_probe(struct phy_device *phydev) +{ + struct device *dev = &phydev->mdio.dev; + struct qca808x_priv *priv; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + /* Init LED polarity mode to -1 */ + priv->led_polarity_mode = -1; + + phydev->priv = priv; + + return 0; +} + +static int qca808x_config_init(struct phy_device *phydev) +{ + struct qca808x_priv *priv = phydev->priv; + int ret; + + /* Default to LED Active High if active-low not in DT */ + if (priv->led_polarity_mode == -1) { + ret = phy_set_bits_mmd(phydev, MDIO_MMD_AN, + QCA808X_MMD7_LED_POLARITY_CTRL, + QCA808X_LED_ACTIVE_HIGH); + if (ret) + return ret; + } + + /* Active adc&vga on 802.3az for the link 1000M and 100M */ + ret = phy_modify_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_ADDR_CLD_CTRL7, + QCA808X_8023AZ_AFE_CTRL_MASK, QCA808X_8023AZ_AFE_EN); + if (ret) + return ret; + + /* Adjust the threshold on 802.3az for the link 1000M */ + ret = phy_write_mmd(phydev, MDIO_MMD_PCS, + QCA808X_PHY_MMD3_AZ_TRAINING_CTRL, + QCA808X_MMD3_AZ_TRAINING_VAL); + if (ret) + return ret; + + if (qca808x_has_fast_retrain_or_slave_seed(phydev)) { + /* Config the fast retrain for the link 2500M */ + ret = qca808x_phy_fast_retrain_config(phydev); + if (ret) + return ret; + + ret = genphy_read_master_slave(phydev); + if (ret < 0) + return ret; + + if (!qca808x_is_prefer_master(phydev)) { + /* Enable seed and configure lower ramdom seed to make phy + * linked as slave mode. + */ + ret = qca808x_phy_ms_seed_enable(phydev, true); + if (ret) + return ret; + } + } + + qca808x_fill_possible_interfaces(phydev); + + /* Configure adc threshold as 100mv for the link 10M */ + return at803x_debug_reg_mask(phydev, QCA808X_PHY_DEBUG_ADC_THRESHOLD, + QCA808X_ADC_THRESHOLD_MASK, + QCA808X_ADC_THRESHOLD_100MV); +} + +static int qca808x_read_status(struct phy_device *phydev) +{ + struct at803x_ss_mask ss_mask = { 0 }; + int ret; + + ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_STAT); + if (ret < 0) + return ret; + + linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->lp_advertising, + ret & MDIO_AN_10GBT_STAT_LP2_5G); + + ret = genphy_read_status(phydev); + if (ret) + return ret; + + /* qca8081 takes the different bits for speed value from at803x */ + ss_mask.speed_mask = QCA808X_SS_SPEED_MASK; + ss_mask.speed_shift = __bf_shf(QCA808X_SS_SPEED_MASK); + ret = at803x_read_specific_status(phydev, ss_mask); + if (ret < 0) + return ret; + + if (phydev->link) { + if (phydev->speed == SPEED_2500) + phydev->interface = PHY_INTERFACE_MODE_2500BASEX; + else + phydev->interface = PHY_INTERFACE_MODE_SGMII; + } else { + /* generate seed as a lower random value to make PHY linked as SLAVE easily, + * except for master/slave configuration fault detected or the master mode + * preferred. + * + * the reason for not putting this code into the function link_change_notify is + * the corner case where the link partner is also the qca8081 PHY and the seed + * value is configured as the same value, the link can't be up and no link change + * occurs. + */ + if (qca808x_has_fast_retrain_or_slave_seed(phydev)) { + if (phydev->master_slave_state == MASTER_SLAVE_STATE_ERR || + qca808x_is_prefer_master(phydev)) { + qca808x_phy_ms_seed_enable(phydev, false); + } else { + qca808x_phy_ms_seed_enable(phydev, true); + } + } + } + + return 0; +} + +static int qca808x_soft_reset(struct phy_device *phydev) +{ + int ret; + + ret = genphy_soft_reset(phydev); + if (ret < 0) + return ret; + + if (qca808x_has_fast_retrain_or_slave_seed(phydev)) + ret = qca808x_phy_ms_seed_enable(phydev, true); + + return ret; +} + +static int qca808x_cable_test_start(struct phy_device *phydev) +{ + int ret; + + /* perform CDT with the following configs: + * 1. disable hibernation. + * 2. force PHY working in MDI mode. + * 3. for PHY working in 1000BaseT. + * 4. configure the threshold. + */ + + ret = at803x_debug_reg_mask(phydev, QCA808X_DBG_AN_TEST, QCA808X_HIBERNATION_EN, 0); + if (ret < 0) + return ret; + + ret = at803x_config_mdix(phydev, ETH_TP_MDI); + if (ret < 0) + return ret; + + /* Force 1000base-T needs to configure PMA/PMD and MII_BMCR */ + phydev->duplex = DUPLEX_FULL; + phydev->speed = SPEED_1000; + ret = genphy_c45_pma_setup_forced(phydev); + if (ret < 0) + return ret; + + ret = genphy_setup_forced(phydev); + if (ret < 0) + return ret; + + /* configure the thresholds for open, short, pair ok test */ + phy_write_mmd(phydev, MDIO_MMD_PCS, 0x8074, 0xc040); + phy_write_mmd(phydev, MDIO_MMD_PCS, 0x8076, 0xc040); + phy_write_mmd(phydev, MDIO_MMD_PCS, 0x8077, 0xa060); + phy_write_mmd(phydev, MDIO_MMD_PCS, 0x8078, 0xc050); + phy_write_mmd(phydev, MDIO_MMD_PCS, 0x807a, 0xc060); + phy_write_mmd(phydev, MDIO_MMD_PCS, 0x807e, 0xb060); + + return 0; +} + +static int qca808x_get_features(struct phy_device *phydev) +{ + int ret; + + ret = genphy_c45_pma_read_abilities(phydev); + if (ret) + return ret; + + /* The autoneg ability is not existed in bit3 of MMD7.1, + * but it is supported by qca808x PHY, so we add it here + * manually. + */ + linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->supported); + + /* As for the qca8081 1G version chip, the 2500baseT ability is also + * existed in the bit0 of MMD1.21, we need to remove it manually if + * it is the qca8081 1G chip according to the bit0 of MMD7.0x901d. + */ + if (qca808x_is_1g_only(phydev)) + linkmode_clear_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->supported); + + return 0; +} + +static int qca808x_config_aneg(struct phy_device *phydev) +{ + int phy_ctrl = 0; + int ret; + + ret = at803x_prepare_config_aneg(phydev); + if (ret) + return ret; + + /* The reg MII_BMCR also needs to be configured for force mode, the + * genphy_config_aneg is also needed. + */ + if (phydev->autoneg == AUTONEG_DISABLE) + genphy_c45_pma_setup_forced(phydev); + + if (linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->advertising)) + phy_ctrl = MDIO_AN_10GBT_CTRL_ADV2_5G; + + ret = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL, + MDIO_AN_10GBT_CTRL_ADV2_5G, phy_ctrl); + if (ret < 0) + return ret; + + return __genphy_config_aneg(phydev, ret); +} + +static void qca808x_link_change_notify(struct phy_device *phydev) +{ + /* Assert interface sgmii fifo on link down, deassert it on link up, + * the interface device address is always phy address added by 1. + */ + mdiobus_c45_modify_changed(phydev->mdio.bus, phydev->mdio.addr + 1, + MDIO_MMD_PMAPMD, QCA8081_PHY_SERDES_MMD1_FIFO_CTRL, + QCA8081_PHY_FIFO_RSTN, + phydev->link ? QCA8081_PHY_FIFO_RSTN : 0); +} + +static int qca808x_led_parse_netdev(struct phy_device *phydev, unsigned long rules, + u16 *offload_trigger) +{ + /* Parsing specific to netdev trigger */ + if (test_bit(TRIGGER_NETDEV_TX, &rules)) + *offload_trigger |= QCA808X_LED_TX_BLINK; + if (test_bit(TRIGGER_NETDEV_RX, &rules)) + *offload_trigger |= QCA808X_LED_RX_BLINK; + if (test_bit(TRIGGER_NETDEV_LINK_10, &rules)) + *offload_trigger |= QCA808X_LED_SPEED10_ON; + if (test_bit(TRIGGER_NETDEV_LINK_100, &rules)) + *offload_trigger |= QCA808X_LED_SPEED100_ON; + if (test_bit(TRIGGER_NETDEV_LINK_1000, &rules)) + *offload_trigger |= QCA808X_LED_SPEED1000_ON; + if (test_bit(TRIGGER_NETDEV_LINK_2500, &rules)) + *offload_trigger |= QCA808X_LED_SPEED2500_ON; + if (test_bit(TRIGGER_NETDEV_HALF_DUPLEX, &rules)) + *offload_trigger |= QCA808X_LED_HALF_DUPLEX_ON; + if (test_bit(TRIGGER_NETDEV_FULL_DUPLEX, &rules)) + *offload_trigger |= QCA808X_LED_FULL_DUPLEX_ON; + + if (rules && !*offload_trigger) + return -EOPNOTSUPP; + + /* Enable BLINK_CHECK_BYPASS by default to make the LED + * blink even with duplex or speed mode not enabled. + */ + *offload_trigger |= QCA808X_LED_BLINK_CHECK_BYPASS; + + return 0; +} + +static int qca808x_led_hw_control_enable(struct phy_device *phydev, u8 index) +{ + u16 reg; + + if (index > 2) + return -EINVAL; + + reg = QCA808X_MMD7_LED_FORCE_CTRL(index); + return qca808x_led_reg_hw_control_enable(phydev, reg); +} + +static int qca808x_led_hw_is_supported(struct phy_device *phydev, u8 index, + unsigned long rules) +{ + u16 offload_trigger = 0; + + if (index > 2) + return -EINVAL; + + return qca808x_led_parse_netdev(phydev, rules, &offload_trigger); +} + +static int qca808x_led_hw_control_set(struct phy_device *phydev, u8 index, + unsigned long rules) +{ + u16 reg, offload_trigger = 0; + int ret; + + if (index > 2) + return -EINVAL; + + reg = QCA808X_MMD7_LED_CTRL(index); + + ret = qca808x_led_parse_netdev(phydev, rules, &offload_trigger); + if (ret) + return ret; + + ret = qca808x_led_hw_control_enable(phydev, index); + if (ret) + return ret; + + return phy_modify_mmd(phydev, MDIO_MMD_AN, reg, + QCA808X_LED_PATTERN_MASK, + offload_trigger); +} + +static bool qca808x_led_hw_control_status(struct phy_device *phydev, u8 index) +{ + u16 reg; + + if (index > 2) + return false; + + reg = QCA808X_MMD7_LED_FORCE_CTRL(index); + return qca808x_led_reg_hw_control_status(phydev, reg); +} + +static int qca808x_led_hw_control_get(struct phy_device *phydev, u8 index, + unsigned long *rules) +{ + u16 reg; + int val; + + if (index > 2) + return -EINVAL; + + /* Check if we have hw control enabled */ + if (qca808x_led_hw_control_status(phydev, index)) + return -EINVAL; + + reg = QCA808X_MMD7_LED_CTRL(index); + + val = phy_read_mmd(phydev, MDIO_MMD_AN, reg); + if (val & QCA808X_LED_TX_BLINK) + set_bit(TRIGGER_NETDEV_TX, rules); + if (val & QCA808X_LED_RX_BLINK) + set_bit(TRIGGER_NETDEV_RX, rules); + if (val & QCA808X_LED_SPEED10_ON) + set_bit(TRIGGER_NETDEV_LINK_10, rules); + if (val & QCA808X_LED_SPEED100_ON) + set_bit(TRIGGER_NETDEV_LINK_100, rules); + if (val & QCA808X_LED_SPEED1000_ON) + set_bit(TRIGGER_NETDEV_LINK_1000, rules); + if (val & QCA808X_LED_SPEED2500_ON) + set_bit(TRIGGER_NETDEV_LINK_2500, rules); + if (val & QCA808X_LED_HALF_DUPLEX_ON) + set_bit(TRIGGER_NETDEV_HALF_DUPLEX, rules); + if (val & QCA808X_LED_FULL_DUPLEX_ON) + set_bit(TRIGGER_NETDEV_FULL_DUPLEX, rules); + + return 0; +} + +static int qca808x_led_hw_control_reset(struct phy_device *phydev, u8 index) +{ + u16 reg; + + if (index > 2) + return -EINVAL; + + reg = QCA808X_MMD7_LED_CTRL(index); + + return phy_clear_bits_mmd(phydev, MDIO_MMD_AN, reg, + QCA808X_LED_PATTERN_MASK); +} + +static int qca808x_led_brightness_set(struct phy_device *phydev, + u8 index, enum led_brightness value) +{ + u16 reg; + int ret; + + if (index > 2) + return -EINVAL; + + if (!value) { + ret = qca808x_led_hw_control_reset(phydev, index); + if (ret) + return ret; + } + + reg = QCA808X_MMD7_LED_FORCE_CTRL(index); + return qca808x_led_reg_brightness_set(phydev, reg, value); +} + +static int qca808x_led_blink_set(struct phy_device *phydev, u8 index, + unsigned long *delay_on, + unsigned long *delay_off) +{ + u16 reg; + + if (index > 2) + return -EINVAL; + + reg = QCA808X_MMD7_LED_FORCE_CTRL(index); + return qca808x_led_reg_blink_set(phydev, reg, delay_on, delay_off); +} + +static int qca808x_led_polarity_set(struct phy_device *phydev, int index, + unsigned long modes) +{ + struct qca808x_priv *priv = phydev->priv; + bool active_low = false; + u32 mode; + + for_each_set_bit(mode, &modes, __PHY_LED_MODES_NUM) { + switch (mode) { + case PHY_LED_ACTIVE_LOW: + active_low = true; + break; + default: + return -EINVAL; + } + } + + /* PHY polarity is global and can't be set per LED. + * To detect this, check if last requested polarity mode + * match the new one. + */ + if (priv->led_polarity_mode >= 0 && + priv->led_polarity_mode != active_low) { + phydev_err(phydev, "PHY polarity is global. Mismatched polarity on different LED\n"); + return -EINVAL; + } + + /* Save the last PHY polarity mode */ + priv->led_polarity_mode = active_low; + + return phy_modify_mmd(phydev, MDIO_MMD_AN, + QCA808X_MMD7_LED_POLARITY_CTRL, + QCA808X_LED_ACTIVE_HIGH, + active_low ? 0 : QCA808X_LED_ACTIVE_HIGH); +} + +static struct phy_driver qca808x_driver[] = { +{ + /* Qualcomm QCA8081 */ + PHY_ID_MATCH_EXACT(QCA8081_PHY_ID), + .name = "Qualcomm QCA8081", + .flags = PHY_POLL_CABLE_TEST, + .probe = qca808x_probe, + .config_intr = at803x_config_intr, + .handle_interrupt = at803x_handle_interrupt, + .get_tunable = at803x_get_tunable, + .set_tunable = at803x_set_tunable, + .set_wol = at803x_set_wol, + .get_wol = at803x_get_wol, + .get_features = qca808x_get_features, + .config_aneg = qca808x_config_aneg, + .suspend = genphy_suspend, + .resume = genphy_resume, + .read_status = qca808x_read_status, + .config_init = qca808x_config_init, + .soft_reset = qca808x_soft_reset, + .cable_test_start = qca808x_cable_test_start, + .cable_test_get_status = qca808x_cable_test_get_status, + .link_change_notify = qca808x_link_change_notify, + .led_brightness_set = qca808x_led_brightness_set, + .led_blink_set = qca808x_led_blink_set, + .led_hw_is_supported = qca808x_led_hw_is_supported, + .led_hw_control_set = qca808x_led_hw_control_set, + .led_hw_control_get = qca808x_led_hw_control_get, + .led_polarity_set = qca808x_led_polarity_set, +}, }; + +module_phy_driver(qca808x_driver); + +static struct mdio_device_id __maybe_unused qca808x_tbl[] = { + { PHY_ID_MATCH_EXACT(QCA8081_PHY_ID) }, + { } +}; + +MODULE_DEVICE_TABLE(mdio, qca808x_tbl); diff --git a/drivers/net/phy/qcom/qca83xx.c b/drivers/net/phy/qcom/qca83xx.c new file mode 100644 index 0000000000..5d083ef025 --- /dev/null +++ b/drivers/net/phy/qcom/qca83xx.c @@ -0,0 +1,275 @@ +// SPDX-License-Identifier: GPL-2.0+ + +#include <linux/phy.h> +#include <linux/module.h> + +#include "qcom.h" + +#define AT803X_DEBUG_REG_3C 0x3C + +#define AT803X_DEBUG_REG_GREEN 0x3D +#define AT803X_DEBUG_GATE_CLK_IN1000 BIT(6) + +#define MDIO_AZ_DEBUG 0x800D + +#define QCA8327_A_PHY_ID 0x004dd033 +#define QCA8327_B_PHY_ID 0x004dd034 +#define QCA8337_PHY_ID 0x004dd036 +#define QCA8K_PHY_ID_MASK 0xffffffff + +#define QCA8K_DEVFLAGS_REVISION_MASK GENMASK(2, 0) + +static struct at803x_hw_stat qca83xx_hw_stats[] = { + { "phy_idle_errors", 0xa, GENMASK(7, 0), PHY}, + { "phy_receive_errors", 0x15, GENMASK(15, 0), PHY}, + { "eee_wake_errors", 0x16, GENMASK(15, 0), MMD}, +}; + +struct qca83xx_priv { + u64 stats[ARRAY_SIZE(qca83xx_hw_stats)]; +}; + +MODULE_DESCRIPTION("Qualcomm Atheros QCA83XX PHY driver"); +MODULE_AUTHOR("Matus Ujhelyi"); +MODULE_AUTHOR("Christian Marangi <ansuelsmth@gmail.com>"); +MODULE_LICENSE("GPL"); + +static int qca83xx_get_sset_count(struct phy_device *phydev) +{ + return ARRAY_SIZE(qca83xx_hw_stats); +} + +static void qca83xx_get_strings(struct phy_device *phydev, u8 *data) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(qca83xx_hw_stats); i++) { + strscpy(data + i * ETH_GSTRING_LEN, + qca83xx_hw_stats[i].string, ETH_GSTRING_LEN); + } +} + +static u64 qca83xx_get_stat(struct phy_device *phydev, int i) +{ + struct at803x_hw_stat stat = qca83xx_hw_stats[i]; + struct qca83xx_priv *priv = phydev->priv; + int val; + u64 ret; + + if (stat.access_type == MMD) + val = phy_read_mmd(phydev, MDIO_MMD_PCS, stat.reg); + else + val = phy_read(phydev, stat.reg); + + if (val < 0) { + ret = U64_MAX; + } else { + val = val & stat.mask; + priv->stats[i] += val; + ret = priv->stats[i]; + } + + return ret; +} + +static void qca83xx_get_stats(struct phy_device *phydev, + struct ethtool_stats *stats, u64 *data) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(qca83xx_hw_stats); i++) + data[i] = qca83xx_get_stat(phydev, i); +} + +static int qca83xx_probe(struct phy_device *phydev) +{ + struct device *dev = &phydev->mdio.dev; + struct qca83xx_priv *priv; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + phydev->priv = priv; + + return 0; +} + +static int qca83xx_config_init(struct phy_device *phydev) +{ + u8 switch_revision; + + switch_revision = phydev->dev_flags & QCA8K_DEVFLAGS_REVISION_MASK; + + switch (switch_revision) { + case 1: + /* For 100M waveform */ + at803x_debug_reg_write(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL, 0x02ea); + /* Turn on Gigabit clock */ + at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_GREEN, 0x68a0); + break; + + case 2: + phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, 0x0); + fallthrough; + case 4: + phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_AZ_DEBUG, 0x803f); + at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_GREEN, 0x6860); + at803x_debug_reg_write(phydev, AT803X_DEBUG_SYSTEM_CTRL_MODE, 0x2c46); + at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_3C, 0x6000); + break; + } + + /* Following original QCA sourcecode set port to prefer master */ + phy_set_bits(phydev, MII_CTRL1000, CTL1000_PREFER_MASTER); + + return 0; +} + +static int qca8327_config_init(struct phy_device *phydev) +{ + /* QCA8327 require DAC amplitude adjustment for 100m set to +6%. + * Disable on init and enable only with 100m speed following + * qca original source code. + */ + at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL, + QCA8327_DEBUG_MANU_CTRL_EN, 0); + + return qca83xx_config_init(phydev); +} + +static void qca83xx_link_change_notify(struct phy_device *phydev) +{ + /* Set DAC Amplitude adjustment to +6% for 100m on link running */ + if (phydev->state == PHY_RUNNING) { + if (phydev->speed == SPEED_100) + at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL, + QCA8327_DEBUG_MANU_CTRL_EN, + QCA8327_DEBUG_MANU_CTRL_EN); + } else { + /* Reset DAC Amplitude adjustment */ + at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL, + QCA8327_DEBUG_MANU_CTRL_EN, 0); + } +} + +static int qca83xx_resume(struct phy_device *phydev) +{ + int ret, val; + + /* Skip reset if not suspended */ + if (!phydev->suspended) + return 0; + + /* Reinit the port, reset values set by suspend */ + qca83xx_config_init(phydev); + + /* Reset the port on port resume */ + phy_set_bits(phydev, MII_BMCR, BMCR_RESET | BMCR_ANENABLE); + + /* On resume from suspend the switch execute a reset and + * restart auto-negotiation. Wait for reset to complete. + */ + ret = phy_read_poll_timeout(phydev, MII_BMCR, val, !(val & BMCR_RESET), + 50000, 600000, true); + if (ret) + return ret; + + usleep_range(1000, 2000); + + return 0; +} + +static int qca83xx_suspend(struct phy_device *phydev) +{ + at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_GREEN, + AT803X_DEBUG_GATE_CLK_IN1000, 0); + + at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_HIB_CTRL, + AT803X_DEBUG_HIB_CTRL_EN_ANY_CHANGE | + AT803X_DEBUG_HIB_CTRL_SEL_RST_80U, 0); + + return 0; +} + +static int qca8337_suspend(struct phy_device *phydev) +{ + /* Only QCA8337 support actual suspend. */ + genphy_suspend(phydev); + + return qca83xx_suspend(phydev); +} + +static int qca8327_suspend(struct phy_device *phydev) +{ + u16 mask = 0; + + /* QCA8327 cause port unreliability when phy suspend + * is set. + */ + mask |= ~(BMCR_SPEED1000 | BMCR_FULLDPLX); + phy_modify(phydev, MII_BMCR, mask, 0); + + return qca83xx_suspend(phydev); +} + +static struct phy_driver qca83xx_driver[] = { +{ + /* QCA8337 */ + .phy_id = QCA8337_PHY_ID, + .phy_id_mask = QCA8K_PHY_ID_MASK, + .name = "Qualcomm Atheros 8337 internal PHY", + /* PHY_GBIT_FEATURES */ + .probe = qca83xx_probe, + .flags = PHY_IS_INTERNAL, + .config_init = qca83xx_config_init, + .soft_reset = genphy_soft_reset, + .get_sset_count = qca83xx_get_sset_count, + .get_strings = qca83xx_get_strings, + .get_stats = qca83xx_get_stats, + .suspend = qca8337_suspend, + .resume = qca83xx_resume, +}, { + /* QCA8327-A from switch QCA8327-AL1A */ + .phy_id = QCA8327_A_PHY_ID, + .phy_id_mask = QCA8K_PHY_ID_MASK, + .name = "Qualcomm Atheros 8327-A internal PHY", + /* PHY_GBIT_FEATURES */ + .link_change_notify = qca83xx_link_change_notify, + .probe = qca83xx_probe, + .flags = PHY_IS_INTERNAL, + .config_init = qca8327_config_init, + .soft_reset = genphy_soft_reset, + .get_sset_count = qca83xx_get_sset_count, + .get_strings = qca83xx_get_strings, + .get_stats = qca83xx_get_stats, + .suspend = qca8327_suspend, + .resume = qca83xx_resume, +}, { + /* QCA8327-B from switch QCA8327-BL1A */ + .phy_id = QCA8327_B_PHY_ID, + .phy_id_mask = QCA8K_PHY_ID_MASK, + .name = "Qualcomm Atheros 8327-B internal PHY", + /* PHY_GBIT_FEATURES */ + .link_change_notify = qca83xx_link_change_notify, + .probe = qca83xx_probe, + .flags = PHY_IS_INTERNAL, + .config_init = qca8327_config_init, + .soft_reset = genphy_soft_reset, + .get_sset_count = qca83xx_get_sset_count, + .get_strings = qca83xx_get_strings, + .get_stats = qca83xx_get_stats, + .suspend = qca8327_suspend, + .resume = qca83xx_resume, +}, }; + +module_phy_driver(qca83xx_driver); + +static struct mdio_device_id __maybe_unused qca83xx_tbl[] = { + { PHY_ID_MATCH_EXACT(QCA8337_PHY_ID) }, + { PHY_ID_MATCH_EXACT(QCA8327_A_PHY_ID) }, + { PHY_ID_MATCH_EXACT(QCA8327_B_PHY_ID) }, + { } +}; + +MODULE_DEVICE_TABLE(mdio, qca83xx_tbl); diff --git a/drivers/net/phy/qcom/qcom-phy-lib.c b/drivers/net/phy/qcom/qcom-phy-lib.c new file mode 100644 index 0000000000..d28815ef56 --- /dev/null +++ b/drivers/net/phy/qcom/qcom-phy-lib.c @@ -0,0 +1,676 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <linux/phy.h> +#include <linux/module.h> + +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/ethtool_netlink.h> + +#include "qcom.h" + +MODULE_DESCRIPTION("Qualcomm PHY driver Common Functions"); +MODULE_AUTHOR("Matus Ujhelyi"); +MODULE_AUTHOR("Christian Marangi <ansuelsmth@gmail.com>"); +MODULE_LICENSE("GPL"); + +int at803x_debug_reg_read(struct phy_device *phydev, u16 reg) +{ + int ret; + + ret = phy_write(phydev, AT803X_DEBUG_ADDR, reg); + if (ret < 0) + return ret; + + return phy_read(phydev, AT803X_DEBUG_DATA); +} +EXPORT_SYMBOL_GPL(at803x_debug_reg_read); + +int at803x_debug_reg_mask(struct phy_device *phydev, u16 reg, + u16 clear, u16 set) +{ + u16 val; + int ret; + + ret = at803x_debug_reg_read(phydev, reg); + if (ret < 0) + return ret; + + val = ret & 0xffff; + val &= ~clear; + val |= set; + + return phy_write(phydev, AT803X_DEBUG_DATA, val); +} +EXPORT_SYMBOL_GPL(at803x_debug_reg_mask); + +int at803x_debug_reg_write(struct phy_device *phydev, u16 reg, u16 data) +{ + int ret; + + ret = phy_write(phydev, AT803X_DEBUG_ADDR, reg); + if (ret < 0) + return ret; + + return phy_write(phydev, AT803X_DEBUG_DATA, data); +} +EXPORT_SYMBOL_GPL(at803x_debug_reg_write); + +int at803x_set_wol(struct phy_device *phydev, + struct ethtool_wolinfo *wol) +{ + int ret, irq_enabled; + + if (wol->wolopts & WAKE_MAGIC) { + struct net_device *ndev = phydev->attached_dev; + const u8 *mac; + unsigned int i; + static const unsigned int offsets[] = { + AT803X_LOC_MAC_ADDR_32_47_OFFSET, + AT803X_LOC_MAC_ADDR_16_31_OFFSET, + AT803X_LOC_MAC_ADDR_0_15_OFFSET, + }; + + if (!ndev) + return -ENODEV; + + mac = (const u8 *)ndev->dev_addr; + + if (!is_valid_ether_addr(mac)) + return -EINVAL; + + for (i = 0; i < 3; i++) + phy_write_mmd(phydev, MDIO_MMD_PCS, offsets[i], + mac[(i * 2) + 1] | (mac[(i * 2)] << 8)); + + /* Enable WOL interrupt */ + ret = phy_modify(phydev, AT803X_INTR_ENABLE, 0, AT803X_INTR_ENABLE_WOL); + if (ret) + return ret; + } else { + /* Disable WOL interrupt */ + ret = phy_modify(phydev, AT803X_INTR_ENABLE, AT803X_INTR_ENABLE_WOL, 0); + if (ret) + return ret; + } + + /* Clear WOL status */ + ret = phy_read(phydev, AT803X_INTR_STATUS); + if (ret < 0) + return ret; + + /* Check if there are other interrupts except for WOL triggered when PHY is + * in interrupt mode, only the interrupts enabled by AT803X_INTR_ENABLE can + * be passed up to the interrupt PIN. + */ + irq_enabled = phy_read(phydev, AT803X_INTR_ENABLE); + if (irq_enabled < 0) + return irq_enabled; + + irq_enabled &= ~AT803X_INTR_ENABLE_WOL; + if (ret & irq_enabled && !phy_polling_mode(phydev)) + phy_trigger_machine(phydev); + + return 0; +} +EXPORT_SYMBOL_GPL(at803x_set_wol); + +void at803x_get_wol(struct phy_device *phydev, + struct ethtool_wolinfo *wol) +{ + int value; + + wol->supported = WAKE_MAGIC; + wol->wolopts = 0; + + value = phy_read(phydev, AT803X_INTR_ENABLE); + if (value < 0) + return; + + if (value & AT803X_INTR_ENABLE_WOL) + wol->wolopts |= WAKE_MAGIC; +} +EXPORT_SYMBOL_GPL(at803x_get_wol); + +int at803x_ack_interrupt(struct phy_device *phydev) +{ + int err; + + err = phy_read(phydev, AT803X_INTR_STATUS); + + return (err < 0) ? err : 0; +} +EXPORT_SYMBOL_GPL(at803x_ack_interrupt); + +int at803x_config_intr(struct phy_device *phydev) +{ + int err; + int value; + + value = phy_read(phydev, AT803X_INTR_ENABLE); + + if (phydev->interrupts == PHY_INTERRUPT_ENABLED) { + /* Clear any pending interrupts */ + err = at803x_ack_interrupt(phydev); + if (err) + return err; + + value |= AT803X_INTR_ENABLE_AUTONEG_ERR; + value |= AT803X_INTR_ENABLE_SPEED_CHANGED; + value |= AT803X_INTR_ENABLE_DUPLEX_CHANGED; + value |= AT803X_INTR_ENABLE_LINK_FAIL; + value |= AT803X_INTR_ENABLE_LINK_SUCCESS; + + err = phy_write(phydev, AT803X_INTR_ENABLE, value); + } else { + err = phy_write(phydev, AT803X_INTR_ENABLE, 0); + if (err) + return err; + + /* Clear any pending interrupts */ + err = at803x_ack_interrupt(phydev); + } + + return err; +} +EXPORT_SYMBOL_GPL(at803x_config_intr); + +irqreturn_t at803x_handle_interrupt(struct phy_device *phydev) +{ + int irq_status, int_enabled; + + irq_status = phy_read(phydev, AT803X_INTR_STATUS); + if (irq_status < 0) { + phy_error(phydev); + return IRQ_NONE; + } + + /* Read the current enabled interrupts */ + int_enabled = phy_read(phydev, AT803X_INTR_ENABLE); + if (int_enabled < 0) { + phy_error(phydev); + return IRQ_NONE; + } + + /* See if this was one of our enabled interrupts */ + if (!(irq_status & int_enabled)) + return IRQ_NONE; + + phy_trigger_machine(phydev); + + return IRQ_HANDLED; +} +EXPORT_SYMBOL_GPL(at803x_handle_interrupt); + +int at803x_read_specific_status(struct phy_device *phydev, + struct at803x_ss_mask ss_mask) +{ + int ss; + + /* Read the AT8035 PHY-Specific Status register, which indicates the + * speed and duplex that the PHY is actually using, irrespective of + * whether we are in autoneg mode or not. + */ + ss = phy_read(phydev, AT803X_SPECIFIC_STATUS); + if (ss < 0) + return ss; + + if (ss & AT803X_SS_SPEED_DUPLEX_RESOLVED) { + int sfc, speed; + + sfc = phy_read(phydev, AT803X_SPECIFIC_FUNCTION_CONTROL); + if (sfc < 0) + return sfc; + + speed = ss & ss_mask.speed_mask; + speed >>= ss_mask.speed_shift; + + switch (speed) { + case AT803X_SS_SPEED_10: + phydev->speed = SPEED_10; + break; + case AT803X_SS_SPEED_100: + phydev->speed = SPEED_100; + break; + case AT803X_SS_SPEED_1000: + phydev->speed = SPEED_1000; + break; + case QCA808X_SS_SPEED_2500: + phydev->speed = SPEED_2500; + break; + } + if (ss & AT803X_SS_DUPLEX) + phydev->duplex = DUPLEX_FULL; + else + phydev->duplex = DUPLEX_HALF; + + if (ss & AT803X_SS_MDIX) + phydev->mdix = ETH_TP_MDI_X; + else + phydev->mdix = ETH_TP_MDI; + + switch (FIELD_GET(AT803X_SFC_MDI_CROSSOVER_MODE_M, sfc)) { + case AT803X_SFC_MANUAL_MDI: + phydev->mdix_ctrl = ETH_TP_MDI; + break; + case AT803X_SFC_MANUAL_MDIX: + phydev->mdix_ctrl = ETH_TP_MDI_X; + break; + case AT803X_SFC_AUTOMATIC_CROSSOVER: + phydev->mdix_ctrl = ETH_TP_MDI_AUTO; + break; + } + } + + return 0; +} +EXPORT_SYMBOL_GPL(at803x_read_specific_status); + +int at803x_config_mdix(struct phy_device *phydev, u8 ctrl) +{ + u16 val; + + switch (ctrl) { + case ETH_TP_MDI: + val = AT803X_SFC_MANUAL_MDI; + break; + case ETH_TP_MDI_X: + val = AT803X_SFC_MANUAL_MDIX; + break; + case ETH_TP_MDI_AUTO: + val = AT803X_SFC_AUTOMATIC_CROSSOVER; + break; + default: + return 0; + } + + return phy_modify_changed(phydev, AT803X_SPECIFIC_FUNCTION_CONTROL, + AT803X_SFC_MDI_CROSSOVER_MODE_M, + FIELD_PREP(AT803X_SFC_MDI_CROSSOVER_MODE_M, val)); +} +EXPORT_SYMBOL_GPL(at803x_config_mdix); + +int at803x_prepare_config_aneg(struct phy_device *phydev) +{ + int ret; + + ret = at803x_config_mdix(phydev, phydev->mdix_ctrl); + if (ret < 0) + return ret; + + /* Changes of the midx bits are disruptive to the normal operation; + * therefore any changes to these registers must be followed by a + * software reset to take effect. + */ + if (ret == 1) { + ret = genphy_soft_reset(phydev); + if (ret < 0) + return ret; + } + + return 0; +} +EXPORT_SYMBOL_GPL(at803x_prepare_config_aneg); + +int at803x_read_status(struct phy_device *phydev) +{ + struct at803x_ss_mask ss_mask = { 0 }; + int err, old_link = phydev->link; + + /* Update the link, but return if there was an error */ + err = genphy_update_link(phydev); + if (err) + return err; + + /* why bother the PHY if nothing can have changed */ + if (phydev->autoneg == AUTONEG_ENABLE && old_link && phydev->link) + return 0; + + phydev->speed = SPEED_UNKNOWN; + phydev->duplex = DUPLEX_UNKNOWN; + phydev->pause = 0; + phydev->asym_pause = 0; + + err = genphy_read_lpa(phydev); + if (err < 0) + return err; + + ss_mask.speed_mask = AT803X_SS_SPEED_MASK; + ss_mask.speed_shift = __bf_shf(AT803X_SS_SPEED_MASK); + err = at803x_read_specific_status(phydev, ss_mask); + if (err < 0) + return err; + + if (phydev->autoneg == AUTONEG_ENABLE && phydev->autoneg_complete) + phy_resolve_aneg_pause(phydev); + + return 0; +} +EXPORT_SYMBOL_GPL(at803x_read_status); + +static int at803x_get_downshift(struct phy_device *phydev, u8 *d) +{ + int val; + + val = phy_read(phydev, AT803X_SMART_SPEED); + if (val < 0) + return val; + + if (val & AT803X_SMART_SPEED_ENABLE) + *d = FIELD_GET(AT803X_SMART_SPEED_RETRY_LIMIT_MASK, val) + 2; + else + *d = DOWNSHIFT_DEV_DISABLE; + + return 0; +} + +static int at803x_set_downshift(struct phy_device *phydev, u8 cnt) +{ + u16 mask, set; + int ret; + + switch (cnt) { + case DOWNSHIFT_DEV_DEFAULT_COUNT: + cnt = AT803X_DEFAULT_DOWNSHIFT; + fallthrough; + case AT803X_MIN_DOWNSHIFT ... AT803X_MAX_DOWNSHIFT: + set = AT803X_SMART_SPEED_ENABLE | + AT803X_SMART_SPEED_BYPASS_TIMER | + FIELD_PREP(AT803X_SMART_SPEED_RETRY_LIMIT_MASK, cnt - 2); + mask = AT803X_SMART_SPEED_RETRY_LIMIT_MASK; + break; + case DOWNSHIFT_DEV_DISABLE: + set = 0; + mask = AT803X_SMART_SPEED_ENABLE | + AT803X_SMART_SPEED_BYPASS_TIMER; + break; + default: + return -EINVAL; + } + + ret = phy_modify_changed(phydev, AT803X_SMART_SPEED, mask, set); + + /* After changing the smart speed settings, we need to perform a + * software reset, use phy_init_hw() to make sure we set the + * reapply any values which might got lost during software reset. + */ + if (ret == 1) + ret = phy_init_hw(phydev); + + return ret; +} + +int at803x_get_tunable(struct phy_device *phydev, + struct ethtool_tunable *tuna, void *data) +{ + switch (tuna->id) { + case ETHTOOL_PHY_DOWNSHIFT: + return at803x_get_downshift(phydev, data); + default: + return -EOPNOTSUPP; + } +} +EXPORT_SYMBOL_GPL(at803x_get_tunable); + +int at803x_set_tunable(struct phy_device *phydev, + struct ethtool_tunable *tuna, const void *data) +{ + switch (tuna->id) { + case ETHTOOL_PHY_DOWNSHIFT: + return at803x_set_downshift(phydev, *(const u8 *)data); + default: + return -EOPNOTSUPP; + } +} +EXPORT_SYMBOL_GPL(at803x_set_tunable); + +int at803x_cdt_fault_length(int dt) +{ + /* According to the datasheet the distance to the fault is + * DELTA_TIME * 0.824 meters. + * + * The author suspect the correct formula is: + * + * fault_distance = DELTA_TIME * (c * VF) / 125MHz / 2 + * + * where c is the speed of light, VF is the velocity factor of + * the twisted pair cable, 125MHz the counter frequency and + * we need to divide by 2 because the hardware will measure the + * round trip time to the fault and back to the PHY. + * + * With a VF of 0.69 we get the factor 0.824 mentioned in the + * datasheet. + */ + return (dt * 824) / 10; +} +EXPORT_SYMBOL_GPL(at803x_cdt_fault_length); + +int at803x_cdt_start(struct phy_device *phydev, u32 cdt_start) +{ + return phy_write(phydev, AT803X_CDT, cdt_start); +} +EXPORT_SYMBOL_GPL(at803x_cdt_start); + +int at803x_cdt_wait_for_completion(struct phy_device *phydev, + u32 cdt_en) +{ + int val, ret; + + /* One test run takes about 25ms */ + ret = phy_read_poll_timeout(phydev, AT803X_CDT, val, + !(val & cdt_en), + 30000, 100000, true); + + return ret < 0 ? ret : 0; +} +EXPORT_SYMBOL_GPL(at803x_cdt_wait_for_completion); + +static bool qca808x_cdt_fault_length_valid(int cdt_code) +{ + switch (cdt_code) { + case QCA808X_CDT_STATUS_STAT_SAME_SHORT: + case QCA808X_CDT_STATUS_STAT_SAME_OPEN: + case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_NORMAL: + case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_OPEN: + case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_SHORT: + case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_NORMAL: + case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_OPEN: + case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_SHORT: + case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_NORMAL: + case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_OPEN: + case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_SHORT: + return true; + default: + return false; + } +} + +static int qca808x_cable_test_result_trans(int cdt_code) +{ + switch (cdt_code) { + case QCA808X_CDT_STATUS_STAT_NORMAL: + return ETHTOOL_A_CABLE_RESULT_CODE_OK; + case QCA808X_CDT_STATUS_STAT_SAME_SHORT: + return ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT; + case QCA808X_CDT_STATUS_STAT_SAME_OPEN: + return ETHTOOL_A_CABLE_RESULT_CODE_OPEN; + case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_NORMAL: + case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_OPEN: + case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_SHORT: + case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_NORMAL: + case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_OPEN: + case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_SHORT: + case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_NORMAL: + case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_OPEN: + case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_SHORT: + return ETHTOOL_A_CABLE_RESULT_CODE_CROSS_SHORT; + case QCA808X_CDT_STATUS_STAT_FAIL: + default: + return ETHTOOL_A_CABLE_RESULT_CODE_UNSPEC; + } +} + +static int qca808x_cdt_fault_length(struct phy_device *phydev, int pair, + int result) +{ + int val; + u32 cdt_length_reg = 0; + + switch (pair) { + case ETHTOOL_A_CABLE_PAIR_A: + cdt_length_reg = QCA808X_MMD3_CDT_DIAG_PAIR_A; + break; + case ETHTOOL_A_CABLE_PAIR_B: + cdt_length_reg = QCA808X_MMD3_CDT_DIAG_PAIR_B; + break; + case ETHTOOL_A_CABLE_PAIR_C: + cdt_length_reg = QCA808X_MMD3_CDT_DIAG_PAIR_C; + break; + case ETHTOOL_A_CABLE_PAIR_D: + cdt_length_reg = QCA808X_MMD3_CDT_DIAG_PAIR_D; + break; + default: + return -EINVAL; + } + + val = phy_read_mmd(phydev, MDIO_MMD_PCS, cdt_length_reg); + if (val < 0) + return val; + + if (result == ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT) + val = FIELD_GET(QCA808X_CDT_DIAG_LENGTH_SAME_SHORT, val); + else + val = FIELD_GET(QCA808X_CDT_DIAG_LENGTH_CROSS_SHORT, val); + + return at803x_cdt_fault_length(val); +} + +static int qca808x_cable_test_get_pair_status(struct phy_device *phydev, u8 pair, + u16 status) +{ + int length, result; + u16 pair_code; + + switch (pair) { + case ETHTOOL_A_CABLE_PAIR_A: + pair_code = FIELD_GET(QCA808X_CDT_CODE_PAIR_A, status); + break; + case ETHTOOL_A_CABLE_PAIR_B: + pair_code = FIELD_GET(QCA808X_CDT_CODE_PAIR_B, status); + break; + case ETHTOOL_A_CABLE_PAIR_C: + pair_code = FIELD_GET(QCA808X_CDT_CODE_PAIR_C, status); + break; + case ETHTOOL_A_CABLE_PAIR_D: + pair_code = FIELD_GET(QCA808X_CDT_CODE_PAIR_D, status); + break; + default: + return -EINVAL; + } + + result = qca808x_cable_test_result_trans(pair_code); + ethnl_cable_test_result(phydev, pair, result); + + if (qca808x_cdt_fault_length_valid(pair_code)) { + length = qca808x_cdt_fault_length(phydev, pair, result); + ethnl_cable_test_fault_length(phydev, pair, length); + } + + return 0; +} + +int qca808x_cable_test_get_status(struct phy_device *phydev, bool *finished) +{ + int ret, val; + + *finished = false; + + val = QCA808X_CDT_ENABLE_TEST | + QCA808X_CDT_LENGTH_UNIT; + ret = at803x_cdt_start(phydev, val); + if (ret) + return ret; + + ret = at803x_cdt_wait_for_completion(phydev, QCA808X_CDT_ENABLE_TEST); + if (ret) + return ret; + + val = phy_read_mmd(phydev, MDIO_MMD_PCS, QCA808X_MMD3_CDT_STATUS); + if (val < 0) + return val; + + ret = qca808x_cable_test_get_pair_status(phydev, ETHTOOL_A_CABLE_PAIR_A, val); + if (ret) + return ret; + + ret = qca808x_cable_test_get_pair_status(phydev, ETHTOOL_A_CABLE_PAIR_B, val); + if (ret) + return ret; + + ret = qca808x_cable_test_get_pair_status(phydev, ETHTOOL_A_CABLE_PAIR_C, val); + if (ret) + return ret; + + ret = qca808x_cable_test_get_pair_status(phydev, ETHTOOL_A_CABLE_PAIR_D, val); + if (ret) + return ret; + + *finished = true; + + return 0; +} +EXPORT_SYMBOL_GPL(qca808x_cable_test_get_status); + +int qca808x_led_reg_hw_control_enable(struct phy_device *phydev, u16 reg) +{ + return phy_clear_bits_mmd(phydev, MDIO_MMD_AN, reg, + QCA808X_LED_FORCE_EN); +} +EXPORT_SYMBOL_GPL(qca808x_led_reg_hw_control_enable); + +bool qca808x_led_reg_hw_control_status(struct phy_device *phydev, u16 reg) +{ + int val; + + val = phy_read_mmd(phydev, MDIO_MMD_AN, reg); + return !(val & QCA808X_LED_FORCE_EN); +} +EXPORT_SYMBOL_GPL(qca808x_led_reg_hw_control_status); + +int qca808x_led_reg_brightness_set(struct phy_device *phydev, + u16 reg, enum led_brightness value) +{ + return phy_modify_mmd(phydev, MDIO_MMD_AN, reg, + QCA808X_LED_FORCE_EN | QCA808X_LED_FORCE_MODE_MASK, + QCA808X_LED_FORCE_EN | (value ? QCA808X_LED_FORCE_ON : + QCA808X_LED_FORCE_OFF)); +} +EXPORT_SYMBOL_GPL(qca808x_led_reg_brightness_set); + +int qca808x_led_reg_blink_set(struct phy_device *phydev, u16 reg, + unsigned long *delay_on, + unsigned long *delay_off) +{ + int ret; + + /* Set blink to 50% off, 50% on at 4Hz by default */ + ret = phy_modify_mmd(phydev, MDIO_MMD_AN, QCA808X_MMD7_LED_GLOBAL, + QCA808X_LED_BLINK_FREQ_MASK | QCA808X_LED_BLINK_DUTY_MASK, + QCA808X_LED_BLINK_FREQ_4HZ | QCA808X_LED_BLINK_DUTY_50_50); + if (ret) + return ret; + + /* We use BLINK_1 for normal blinking */ + ret = phy_modify_mmd(phydev, MDIO_MMD_AN, reg, + QCA808X_LED_FORCE_EN | QCA808X_LED_FORCE_MODE_MASK, + QCA808X_LED_FORCE_EN | QCA808X_LED_FORCE_BLINK_1); + if (ret) + return ret; + + /* We set blink to 4Hz, aka 250ms */ + *delay_on = 250 / 2; + *delay_off = 250 / 2; + + return 0; +} +EXPORT_SYMBOL_GPL(qca808x_led_reg_blink_set); diff --git a/drivers/net/phy/qcom/qcom.h b/drivers/net/phy/qcom/qcom.h new file mode 100644 index 0000000000..4bb5417288 --- /dev/null +++ b/drivers/net/phy/qcom/qcom.h @@ -0,0 +1,243 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#define AT803X_SPECIFIC_FUNCTION_CONTROL 0x10 +#define AT803X_SFC_ASSERT_CRS BIT(11) +#define AT803X_SFC_FORCE_LINK BIT(10) +#define AT803X_SFC_MDI_CROSSOVER_MODE_M GENMASK(6, 5) +#define AT803X_SFC_AUTOMATIC_CROSSOVER 0x3 +#define AT803X_SFC_MANUAL_MDIX 0x1 +#define AT803X_SFC_MANUAL_MDI 0x0 +#define AT803X_SFC_SQE_TEST BIT(2) +#define AT803X_SFC_POLARITY_REVERSAL BIT(1) +#define AT803X_SFC_DISABLE_JABBER BIT(0) + +#define AT803X_SPECIFIC_STATUS 0x11 +#define AT803X_SS_SPEED_MASK GENMASK(15, 14) +#define AT803X_SS_SPEED_1000 2 +#define AT803X_SS_SPEED_100 1 +#define AT803X_SS_SPEED_10 0 +#define AT803X_SS_DUPLEX BIT(13) +#define AT803X_SS_SPEED_DUPLEX_RESOLVED BIT(11) +#define AT803X_SS_MDIX BIT(6) + +#define QCA808X_SS_SPEED_MASK GENMASK(9, 7) +#define QCA808X_SS_SPEED_2500 4 + +#define AT803X_INTR_ENABLE 0x12 +#define AT803X_INTR_ENABLE_AUTONEG_ERR BIT(15) +#define AT803X_INTR_ENABLE_SPEED_CHANGED BIT(14) +#define AT803X_INTR_ENABLE_DUPLEX_CHANGED BIT(13) +#define AT803X_INTR_ENABLE_PAGE_RECEIVED BIT(12) +#define AT803X_INTR_ENABLE_LINK_FAIL BIT(11) +#define AT803X_INTR_ENABLE_LINK_SUCCESS BIT(10) +#define AT803X_INTR_ENABLE_LINK_FAIL_BX BIT(8) +#define AT803X_INTR_ENABLE_LINK_SUCCESS_BX BIT(7) +#define AT803X_INTR_ENABLE_WIRESPEED_DOWNGRADE BIT(5) +#define AT803X_INTR_ENABLE_POLARITY_CHANGED BIT(1) +#define AT803X_INTR_ENABLE_WOL BIT(0) + +#define AT803X_INTR_STATUS 0x13 + +#define AT803X_SMART_SPEED 0x14 +#define AT803X_SMART_SPEED_ENABLE BIT(5) +#define AT803X_SMART_SPEED_RETRY_LIMIT_MASK GENMASK(4, 2) +#define AT803X_SMART_SPEED_BYPASS_TIMER BIT(1) + +#define AT803X_CDT 0x16 +#define AT803X_CDT_MDI_PAIR_MASK GENMASK(9, 8) +#define AT803X_CDT_ENABLE_TEST BIT(0) +#define AT803X_CDT_STATUS 0x1c +#define AT803X_CDT_STATUS_STAT_NORMAL 0 +#define AT803X_CDT_STATUS_STAT_SHORT 1 +#define AT803X_CDT_STATUS_STAT_OPEN 2 +#define AT803X_CDT_STATUS_STAT_FAIL 3 +#define AT803X_CDT_STATUS_STAT_MASK GENMASK(9, 8) +#define AT803X_CDT_STATUS_DELTA_TIME_MASK GENMASK(7, 0) + +#define QCA808X_CDT_ENABLE_TEST BIT(15) +#define QCA808X_CDT_INTER_CHECK_DIS BIT(13) +#define QCA808X_CDT_STATUS BIT(11) +#define QCA808X_CDT_LENGTH_UNIT BIT(10) + +#define QCA808X_MMD3_CDT_STATUS 0x8064 +#define QCA808X_MMD3_CDT_DIAG_PAIR_A 0x8065 +#define QCA808X_MMD3_CDT_DIAG_PAIR_B 0x8066 +#define QCA808X_MMD3_CDT_DIAG_PAIR_C 0x8067 +#define QCA808X_MMD3_CDT_DIAG_PAIR_D 0x8068 +#define QCA808X_CDT_DIAG_LENGTH_SAME_SHORT GENMASK(15, 8) +#define QCA808X_CDT_DIAG_LENGTH_CROSS_SHORT GENMASK(7, 0) + +#define QCA808X_CDT_CODE_PAIR_A GENMASK(15, 12) +#define QCA808X_CDT_CODE_PAIR_B GENMASK(11, 8) +#define QCA808X_CDT_CODE_PAIR_C GENMASK(7, 4) +#define QCA808X_CDT_CODE_PAIR_D GENMASK(3, 0) + +#define QCA808X_CDT_STATUS_STAT_TYPE GENMASK(1, 0) +#define QCA808X_CDT_STATUS_STAT_FAIL FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_TYPE, 0) +#define QCA808X_CDT_STATUS_STAT_NORMAL FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_TYPE, 1) +#define QCA808X_CDT_STATUS_STAT_SAME_OPEN FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_TYPE, 2) +#define QCA808X_CDT_STATUS_STAT_SAME_SHORT FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_TYPE, 3) + +#define QCA808X_CDT_STATUS_STAT_MDI GENMASK(3, 2) +#define QCA808X_CDT_STATUS_STAT_MDI1 FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_MDI, 1) +#define QCA808X_CDT_STATUS_STAT_MDI2 FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_MDI, 2) +#define QCA808X_CDT_STATUS_STAT_MDI3 FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_MDI, 3) + +/* NORMAL are MDI with type set to 0 */ +#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_NORMAL QCA808X_CDT_STATUS_STAT_MDI1 +#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_OPEN (QCA808X_CDT_STATUS_STAT_SAME_OPEN |\ + QCA808X_CDT_STATUS_STAT_MDI1) +#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_SHORT (QCA808X_CDT_STATUS_STAT_SAME_SHORT |\ + QCA808X_CDT_STATUS_STAT_MDI1) +#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_NORMAL QCA808X_CDT_STATUS_STAT_MDI2 +#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_OPEN (QCA808X_CDT_STATUS_STAT_SAME_OPEN |\ + QCA808X_CDT_STATUS_STAT_MDI2) +#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_SHORT (QCA808X_CDT_STATUS_STAT_SAME_SHORT |\ + QCA808X_CDT_STATUS_STAT_MDI2) +#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_NORMAL QCA808X_CDT_STATUS_STAT_MDI3 +#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_OPEN (QCA808X_CDT_STATUS_STAT_SAME_OPEN |\ + QCA808X_CDT_STATUS_STAT_MDI3) +#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_SHORT (QCA808X_CDT_STATUS_STAT_SAME_SHORT |\ + QCA808X_CDT_STATUS_STAT_MDI3) + +/* Added for reference of existence but should be handled by wait_for_completion already */ +#define QCA808X_CDT_STATUS_STAT_BUSY (BIT(1) | BIT(3)) + +#define QCA808X_MMD7_LED_GLOBAL 0x8073 +#define QCA808X_LED_BLINK_1 GENMASK(11, 6) +#define QCA808X_LED_BLINK_2 GENMASK(5, 0) +/* Values are the same for both BLINK_1 and BLINK_2 */ +#define QCA808X_LED_BLINK_FREQ_MASK GENMASK(5, 3) +#define QCA808X_LED_BLINK_FREQ_2HZ FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x0) +#define QCA808X_LED_BLINK_FREQ_4HZ FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x1) +#define QCA808X_LED_BLINK_FREQ_8HZ FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x2) +#define QCA808X_LED_BLINK_FREQ_16HZ FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x3) +#define QCA808X_LED_BLINK_FREQ_32HZ FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x4) +#define QCA808X_LED_BLINK_FREQ_64HZ FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x5) +#define QCA808X_LED_BLINK_FREQ_128HZ FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x6) +#define QCA808X_LED_BLINK_FREQ_256HZ FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x7) +#define QCA808X_LED_BLINK_DUTY_MASK GENMASK(2, 0) +#define QCA808X_LED_BLINK_DUTY_50_50 FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x0) +#define QCA808X_LED_BLINK_DUTY_75_25 FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x1) +#define QCA808X_LED_BLINK_DUTY_25_75 FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x2) +#define QCA808X_LED_BLINK_DUTY_33_67 FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x3) +#define QCA808X_LED_BLINK_DUTY_67_33 FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x4) +#define QCA808X_LED_BLINK_DUTY_17_83 FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x5) +#define QCA808X_LED_BLINK_DUTY_83_17 FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x6) +#define QCA808X_LED_BLINK_DUTY_8_92 FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x7) + +/* LED hw control pattern is the same for every LED */ +#define QCA808X_LED_PATTERN_MASK GENMASK(15, 0) +#define QCA808X_LED_SPEED2500_ON BIT(15) +#define QCA808X_LED_SPEED2500_BLINK BIT(14) +/* Follow blink trigger even if duplex or speed condition doesn't match */ +#define QCA808X_LED_BLINK_CHECK_BYPASS BIT(13) +#define QCA808X_LED_FULL_DUPLEX_ON BIT(12) +#define QCA808X_LED_HALF_DUPLEX_ON BIT(11) +#define QCA808X_LED_TX_BLINK BIT(10) +#define QCA808X_LED_RX_BLINK BIT(9) +#define QCA808X_LED_TX_ON_10MS BIT(8) +#define QCA808X_LED_RX_ON_10MS BIT(7) +#define QCA808X_LED_SPEED1000_ON BIT(6) +#define QCA808X_LED_SPEED100_ON BIT(5) +#define QCA808X_LED_SPEED10_ON BIT(4) +#define QCA808X_LED_COLLISION_BLINK BIT(3) +#define QCA808X_LED_SPEED1000_BLINK BIT(2) +#define QCA808X_LED_SPEED100_BLINK BIT(1) +#define QCA808X_LED_SPEED10_BLINK BIT(0) + +/* LED force ctrl is the same for every LED + * No documentation exist for this, not even internal one + * with NDA as QCOM gives only info about configuring + * hw control pattern rules and doesn't indicate any way + * to force the LED to specific mode. + * These define comes from reverse and testing and maybe + * lack of some info or some info are not entirely correct. + * For the basic LED control and hw control these finding + * are enough to support LED control in all the required APIs. + * + * On doing some comparison with implementation with qca807x, + * it was found that it's 1:1 equal to it and confirms all the + * reverse done. It was also found further specification with the + * force mode and the blink modes. + */ +#define QCA808X_LED_FORCE_EN BIT(15) +#define QCA808X_LED_FORCE_MODE_MASK GENMASK(14, 13) +#define QCA808X_LED_FORCE_BLINK_1 FIELD_PREP(QCA808X_LED_FORCE_MODE_MASK, 0x3) +#define QCA808X_LED_FORCE_BLINK_2 FIELD_PREP(QCA808X_LED_FORCE_MODE_MASK, 0x2) +#define QCA808X_LED_FORCE_ON FIELD_PREP(QCA808X_LED_FORCE_MODE_MASK, 0x1) +#define QCA808X_LED_FORCE_OFF FIELD_PREP(QCA808X_LED_FORCE_MODE_MASK, 0x0) + +#define AT803X_LOC_MAC_ADDR_0_15_OFFSET 0x804C +#define AT803X_LOC_MAC_ADDR_16_31_OFFSET 0x804B +#define AT803X_LOC_MAC_ADDR_32_47_OFFSET 0x804A + +#define AT803X_DEBUG_ADDR 0x1D +#define AT803X_DEBUG_DATA 0x1E + +#define AT803X_DEBUG_ANALOG_TEST_CTRL 0x00 +#define QCA8327_DEBUG_MANU_CTRL_EN BIT(2) +#define QCA8337_DEBUG_MANU_CTRL_EN GENMASK(3, 2) +#define AT803X_DEBUG_RX_CLK_DLY_EN BIT(15) + +#define AT803X_DEBUG_SYSTEM_CTRL_MODE 0x05 +#define AT803X_DEBUG_TX_CLK_DLY_EN BIT(8) + +#define AT803X_DEBUG_REG_HIB_CTRL 0x0b +#define AT803X_DEBUG_HIB_CTRL_SEL_RST_80U BIT(10) +#define AT803X_DEBUG_HIB_CTRL_EN_ANY_CHANGE BIT(13) +#define AT803X_DEBUG_HIB_CTRL_PS_HIB_EN BIT(15) + +#define AT803X_DEFAULT_DOWNSHIFT 5 +#define AT803X_MIN_DOWNSHIFT 2 +#define AT803X_MAX_DOWNSHIFT 9 + +enum stat_access_type { + PHY, + MMD +}; + +struct at803x_hw_stat { + const char *string; + u8 reg; + u32 mask; + enum stat_access_type access_type; +}; + +struct at803x_ss_mask { + u16 speed_mask; + u8 speed_shift; +}; + +int at803x_debug_reg_read(struct phy_device *phydev, u16 reg); +int at803x_debug_reg_mask(struct phy_device *phydev, u16 reg, + u16 clear, u16 set); +int at803x_debug_reg_write(struct phy_device *phydev, u16 reg, u16 data); +int at803x_set_wol(struct phy_device *phydev, + struct ethtool_wolinfo *wol); +void at803x_get_wol(struct phy_device *phydev, + struct ethtool_wolinfo *wol); +int at803x_ack_interrupt(struct phy_device *phydev); +int at803x_config_intr(struct phy_device *phydev); +irqreturn_t at803x_handle_interrupt(struct phy_device *phydev); +int at803x_read_specific_status(struct phy_device *phydev, + struct at803x_ss_mask ss_mask); +int at803x_config_mdix(struct phy_device *phydev, u8 ctrl); +int at803x_prepare_config_aneg(struct phy_device *phydev); +int at803x_read_status(struct phy_device *phydev); +int at803x_get_tunable(struct phy_device *phydev, + struct ethtool_tunable *tuna, void *data); +int at803x_set_tunable(struct phy_device *phydev, + struct ethtool_tunable *tuna, const void *data); +int at803x_cdt_fault_length(int dt); +int at803x_cdt_start(struct phy_device *phydev, u32 cdt_start); +int at803x_cdt_wait_for_completion(struct phy_device *phydev, + u32 cdt_en); +int qca808x_cable_test_get_status(struct phy_device *phydev, bool *finished); +int qca808x_led_reg_hw_control_enable(struct phy_device *phydev, u16 reg); +bool qca808x_led_reg_hw_control_status(struct phy_device *phydev, u16 reg); +int qca808x_led_reg_brightness_set(struct phy_device *phydev, + u16 reg, enum led_brightness value); +int qca808x_led_reg_blink_set(struct phy_device *phydev, u16 reg, + unsigned long *delay_on, + unsigned long *delay_off); |