diff options
Diffstat (limited to 'drivers/net/phy/sfp.c')
| -rw-r--r-- | drivers/net/phy/sfp.c | 3140 |
1 files changed, 3140 insertions, 0 deletions
diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c new file mode 100644 index 0000000000..3679a43f4e --- /dev/null +++ b/drivers/net/phy/sfp.c @@ -0,0 +1,3140 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <linux/debugfs.h> +#include <linux/delay.h> +#include <linux/gpio/consumer.h> +#include <linux/hwmon.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/jiffies.h> +#include <linux/mdio/mdio-i2c.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/of.h> +#include <linux/phy.h> +#include <linux/platform_device.h> +#include <linux/rtnetlink.h> +#include <linux/slab.h> +#include <linux/workqueue.h> + +#include "sfp.h" +#include "swphy.h" + +enum { + GPIO_MODDEF0, + GPIO_LOS, + GPIO_TX_FAULT, + GPIO_TX_DISABLE, + GPIO_RS0, + GPIO_RS1, + GPIO_MAX, + + SFP_F_PRESENT = BIT(GPIO_MODDEF0), + SFP_F_LOS = BIT(GPIO_LOS), + SFP_F_TX_FAULT = BIT(GPIO_TX_FAULT), + SFP_F_TX_DISABLE = BIT(GPIO_TX_DISABLE), + SFP_F_RS0 = BIT(GPIO_RS0), + SFP_F_RS1 = BIT(GPIO_RS1), + + SFP_F_OUTPUTS = SFP_F_TX_DISABLE | SFP_F_RS0 | SFP_F_RS1, + + SFP_E_INSERT = 0, + SFP_E_REMOVE, + SFP_E_DEV_ATTACH, + SFP_E_DEV_DETACH, + SFP_E_DEV_DOWN, + SFP_E_DEV_UP, + SFP_E_TX_FAULT, + SFP_E_TX_CLEAR, + SFP_E_LOS_HIGH, + SFP_E_LOS_LOW, + SFP_E_TIMEOUT, + + SFP_MOD_EMPTY = 0, + SFP_MOD_ERROR, + SFP_MOD_PROBE, + SFP_MOD_WAITDEV, + SFP_MOD_HPOWER, + SFP_MOD_WAITPWR, + SFP_MOD_PRESENT, + + SFP_DEV_DETACHED = 0, + SFP_DEV_DOWN, + SFP_DEV_UP, + + SFP_S_DOWN = 0, + SFP_S_FAIL, + SFP_S_WAIT, + SFP_S_INIT, + SFP_S_INIT_PHY, + SFP_S_INIT_TX_FAULT, + SFP_S_WAIT_LOS, + SFP_S_LINK_UP, + SFP_S_TX_FAULT, + SFP_S_REINIT, + SFP_S_TX_DISABLE, +}; + +static const char * const mod_state_strings[] = { + [SFP_MOD_EMPTY] = "empty", + [SFP_MOD_ERROR] = "error", + [SFP_MOD_PROBE] = "probe", + [SFP_MOD_WAITDEV] = "waitdev", + [SFP_MOD_HPOWER] = "hpower", + [SFP_MOD_WAITPWR] = "waitpwr", + [SFP_MOD_PRESENT] = "present", +}; + +static const char *mod_state_to_str(unsigned short mod_state) +{ + if (mod_state >= ARRAY_SIZE(mod_state_strings)) + return "Unknown module state"; + return mod_state_strings[mod_state]; +} + +static const char * const dev_state_strings[] = { + [SFP_DEV_DETACHED] = "detached", + [SFP_DEV_DOWN] = "down", + [SFP_DEV_UP] = "up", +}; + +static const char *dev_state_to_str(unsigned short dev_state) +{ + if (dev_state >= ARRAY_SIZE(dev_state_strings)) + return "Unknown device state"; + return dev_state_strings[dev_state]; +} + +static const char * const event_strings[] = { + [SFP_E_INSERT] = "insert", + [SFP_E_REMOVE] = "remove", + [SFP_E_DEV_ATTACH] = "dev_attach", + [SFP_E_DEV_DETACH] = "dev_detach", + [SFP_E_DEV_DOWN] = "dev_down", + [SFP_E_DEV_UP] = "dev_up", + [SFP_E_TX_FAULT] = "tx_fault", + [SFP_E_TX_CLEAR] = "tx_clear", + [SFP_E_LOS_HIGH] = "los_high", + [SFP_E_LOS_LOW] = "los_low", + [SFP_E_TIMEOUT] = "timeout", +}; + +static const char *event_to_str(unsigned short event) +{ + if (event >= ARRAY_SIZE(event_strings)) + return "Unknown event"; + return event_strings[event]; +} + +static const char * const sm_state_strings[] = { + [SFP_S_DOWN] = "down", + [SFP_S_FAIL] = "fail", + [SFP_S_WAIT] = "wait", + [SFP_S_INIT] = "init", + [SFP_S_INIT_PHY] = "init_phy", + [SFP_S_INIT_TX_FAULT] = "init_tx_fault", + [SFP_S_WAIT_LOS] = "wait_los", + [SFP_S_LINK_UP] = "link_up", + [SFP_S_TX_FAULT] = "tx_fault", + [SFP_S_REINIT] = "reinit", + [SFP_S_TX_DISABLE] = "tx_disable", +}; + +static const char *sm_state_to_str(unsigned short sm_state) +{ + if (sm_state >= ARRAY_SIZE(sm_state_strings)) + return "Unknown state"; + return sm_state_strings[sm_state]; +} + +static const char *gpio_names[] = { + "mod-def0", + "los", + "tx-fault", + "tx-disable", + "rate-select0", + "rate-select1", +}; + +static const enum gpiod_flags gpio_flags[] = { + GPIOD_IN, + GPIOD_IN, + GPIOD_IN, + GPIOD_ASIS, + GPIOD_ASIS, + GPIOD_ASIS, +}; + +/* t_start_up (SFF-8431) or t_init (SFF-8472) is the time required for a + * non-cooled module to initialise its laser safety circuitry. We wait + * an initial T_WAIT period before we check the tx fault to give any PHY + * on board (for a copper SFP) time to initialise. + */ +#define T_WAIT msecs_to_jiffies(50) +#define T_START_UP msecs_to_jiffies(300) +#define T_START_UP_BAD_GPON msecs_to_jiffies(60000) + +/* t_reset is the time required to assert the TX_DISABLE signal to reset + * an indicated TX_FAULT. + */ +#define T_RESET_US 10 +#define T_FAULT_RECOVER msecs_to_jiffies(1000) + +/* N_FAULT_INIT is the number of recovery attempts at module initialisation + * time. If the TX_FAULT signal is not deasserted after this number of + * attempts at clearing it, we decide that the module is faulty. + * N_FAULT is the same but after the module has initialised. + */ +#define N_FAULT_INIT 5 +#define N_FAULT 5 + +/* T_PHY_RETRY is the time interval between attempts to probe the PHY. + * R_PHY_RETRY is the number of attempts. + */ +#define T_PHY_RETRY msecs_to_jiffies(50) +#define R_PHY_RETRY 12 + +/* SFP module presence detection is poor: the three MOD DEF signals are + * the same length on the PCB, which means it's possible for MOD DEF 0 to + * connect before the I2C bus on MOD DEF 1/2. + * + * The SFF-8472 specifies t_serial ("Time from power on until module is + * ready for data transmission over the two wire serial bus.") as 300ms. + */ +#define T_SERIAL msecs_to_jiffies(300) +#define T_HPOWER_LEVEL msecs_to_jiffies(300) +#define T_PROBE_RETRY_INIT msecs_to_jiffies(100) +#define R_PROBE_RETRY_INIT 10 +#define T_PROBE_RETRY_SLOW msecs_to_jiffies(5000) +#define R_PROBE_RETRY_SLOW 12 + +/* SFP modules appear to always have their PHY configured for bus address + * 0x56 (which with mdio-i2c, translates to a PHY address of 22). + * RollBall SFPs access phy via SFP Enhanced Digital Diagnostic Interface + * via address 0x51 (mdio-i2c will use RollBall protocol on this address). + */ +#define SFP_PHY_ADDR 22 +#define SFP_PHY_ADDR_ROLLBALL 17 + +/* SFP_EEPROM_BLOCK_SIZE is the size of data chunk to read the EEPROM + * at a time. Some SFP modules and also some Linux I2C drivers do not like + * reads longer than 16 bytes. + */ +#define SFP_EEPROM_BLOCK_SIZE 16 + +struct sff_data { + unsigned int gpios; + bool (*module_supported)(const struct sfp_eeprom_id *id); +}; + +struct sfp { + struct device *dev; + struct i2c_adapter *i2c; + struct mii_bus *i2c_mii; + struct sfp_bus *sfp_bus; + enum mdio_i2c_proto mdio_protocol; + struct phy_device *mod_phy; + const struct sff_data *type; + size_t i2c_block_size; + u32 max_power_mW; + + unsigned int (*get_state)(struct sfp *); + void (*set_state)(struct sfp *, unsigned int); + int (*read)(struct sfp *, bool, u8, void *, size_t); + int (*write)(struct sfp *, bool, u8, void *, size_t); + + struct gpio_desc *gpio[GPIO_MAX]; + int gpio_irq[GPIO_MAX]; + + bool need_poll; + + /* Access rules: + * state_hw_drive: st_mutex held + * state_hw_mask: st_mutex held + * state_soft_mask: st_mutex held + * state: st_mutex held unless reading input bits + */ + struct mutex st_mutex; /* Protects state */ + unsigned int state_hw_drive; + unsigned int state_hw_mask; + unsigned int state_soft_mask; + unsigned int state; + + struct delayed_work poll; + struct delayed_work timeout; + struct mutex sm_mutex; /* Protects state machine */ + unsigned char sm_mod_state; + unsigned char sm_mod_tries_init; + unsigned char sm_mod_tries; + unsigned char sm_dev_state; + unsigned short sm_state; + unsigned char sm_fault_retries; + unsigned char sm_phy_retries; + + struct sfp_eeprom_id id; + unsigned int module_power_mW; + unsigned int module_t_start_up; + unsigned int module_t_wait; + + unsigned int rate_kbd; + unsigned int rs_threshold_kbd; + unsigned int rs_state_mask; + + bool have_a2; + bool tx_fault_ignore; + + const struct sfp_quirk *quirk; + +#if IS_ENABLED(CONFIG_HWMON) + struct sfp_diag diag; + struct delayed_work hwmon_probe; + unsigned int hwmon_tries; + struct device *hwmon_dev; + char *hwmon_name; +#endif + +#if IS_ENABLED(CONFIG_DEBUG_FS) + struct dentry *debugfs_dir; +#endif +}; + +static bool sff_module_supported(const struct sfp_eeprom_id *id) +{ + return id->base.phys_id == SFF8024_ID_SFF_8472 && + id->base.phys_ext_id == SFP_PHYS_EXT_ID_SFP; +} + +static const struct sff_data sff_data = { + .gpios = SFP_F_LOS | SFP_F_TX_FAULT | SFP_F_TX_DISABLE, + .module_supported = sff_module_supported, +}; + +static bool sfp_module_supported(const struct sfp_eeprom_id *id) +{ + if (id->base.phys_id == SFF8024_ID_SFP && + id->base.phys_ext_id == SFP_PHYS_EXT_ID_SFP) + return true; + + /* SFP GPON module Ubiquiti U-Fiber Instant has in its EEPROM stored + * phys id SFF instead of SFP. Therefore mark this module explicitly + * as supported based on vendor name and pn match. + */ + if (id->base.phys_id == SFF8024_ID_SFF_8472 && + id->base.phys_ext_id == SFP_PHYS_EXT_ID_SFP && + !memcmp(id->base.vendor_name, "UBNT ", 16) && + !memcmp(id->base.vendor_pn, "UF-INSTANT ", 16)) + return true; + + return false; +} + +static const struct sff_data sfp_data = { + .gpios = SFP_F_PRESENT | SFP_F_LOS | SFP_F_TX_FAULT | + SFP_F_TX_DISABLE | SFP_F_RS0 | SFP_F_RS1, + .module_supported = sfp_module_supported, +}; + +static const struct of_device_id sfp_of_match[] = { + { .compatible = "sff,sff", .data = &sff_data, }, + { .compatible = "sff,sfp", .data = &sfp_data, }, + { }, +}; +MODULE_DEVICE_TABLE(of, sfp_of_match); + +static void sfp_fixup_long_startup(struct sfp *sfp) +{ + sfp->module_t_start_up = T_START_UP_BAD_GPON; +} + +static void sfp_fixup_ignore_tx_fault(struct sfp *sfp) +{ + sfp->tx_fault_ignore = true; +} + +// For 10GBASE-T short-reach modules +static void sfp_fixup_10gbaset_30m(struct sfp *sfp) +{ + sfp->id.base.connector = SFF8024_CONNECTOR_RJ45; + sfp->id.base.extended_cc = SFF8024_ECC_10GBASE_T_SR; +} + +static void sfp_fixup_rollball_proto(struct sfp *sfp, unsigned int secs) +{ + sfp->mdio_protocol = MDIO_I2C_ROLLBALL; + sfp->module_t_wait = msecs_to_jiffies(secs * 1000); +} + +static void sfp_fixup_fs_10gt(struct sfp *sfp) +{ + sfp_fixup_10gbaset_30m(sfp); + + // These SFPs need 4 seconds before the PHY can be accessed + sfp_fixup_rollball_proto(sfp, 4); +} + +static void sfp_fixup_halny_gsfp(struct sfp *sfp) +{ + /* Ignore the TX_FAULT and LOS signals on this module. + * these are possibly used for other purposes on this + * module, e.g. a serial port. + */ + sfp->state_hw_mask &= ~(SFP_F_TX_FAULT | SFP_F_LOS); +} + +static void sfp_fixup_rollball(struct sfp *sfp) +{ + // Rollball SFPs need 25 seconds before the PHY can be accessed + sfp_fixup_rollball_proto(sfp, 25); +} + +static void sfp_fixup_rollball_cc(struct sfp *sfp) +{ + sfp_fixup_rollball(sfp); + + /* Some RollBall SFPs may have wrong (zero) extended compliance code + * burned in EEPROM. For PHY probing we need the correct one. + */ + sfp->id.base.extended_cc = SFF8024_ECC_10GBASE_T_SFI; +} + +static void sfp_quirk_2500basex(const struct sfp_eeprom_id *id, + unsigned long *modes, + unsigned long *interfaces) +{ + linkmode_set_bit(ETHTOOL_LINK_MODE_2500baseX_Full_BIT, modes); + __set_bit(PHY_INTERFACE_MODE_2500BASEX, interfaces); +} + +static void sfp_quirk_disable_autoneg(const struct sfp_eeprom_id *id, + unsigned long *modes, + unsigned long *interfaces) +{ + linkmode_clear_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, modes); +} + +static void sfp_quirk_oem_2_5g(const struct sfp_eeprom_id *id, + unsigned long *modes, + unsigned long *interfaces) +{ + /* Copper 2.5G SFP */ + linkmode_set_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, modes); + __set_bit(PHY_INTERFACE_MODE_2500BASEX, interfaces); + sfp_quirk_disable_autoneg(id, modes, interfaces); +} + +static void sfp_quirk_ubnt_uf_instant(const struct sfp_eeprom_id *id, + unsigned long *modes, + unsigned long *interfaces) +{ + /* Ubiquiti U-Fiber Instant module claims that support all transceiver + * types including 10G Ethernet which is not truth. So clear all claimed + * modes and set only one mode which module supports: 1000baseX_Full. + */ + linkmode_zero(modes); + linkmode_set_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT, modes); +} + +#define SFP_QUIRK(_v, _p, _m, _f) \ + { .vendor = _v, .part = _p, .modes = _m, .fixup = _f, } +#define SFP_QUIRK_M(_v, _p, _m) SFP_QUIRK(_v, _p, _m, NULL) +#define SFP_QUIRK_F(_v, _p, _f) SFP_QUIRK(_v, _p, NULL, _f) + +static const struct sfp_quirk sfp_quirks[] = { + // Alcatel Lucent G-010S-P can operate at 2500base-X, but incorrectly + // report 2500MBd NRZ in their EEPROM + SFP_QUIRK_M("ALCATELLUCENT", "G010SP", sfp_quirk_2500basex), + + // Alcatel Lucent G-010S-A can operate at 2500base-X, but report 3.2GBd + // NRZ in their EEPROM + SFP_QUIRK("ALCATELLUCENT", "3FE46541AA", sfp_quirk_2500basex, + sfp_fixup_long_startup), + + // Fiberstore SFP-10G-T doesn't identify as copper, and uses the + // Rollball protocol to talk to the PHY. + SFP_QUIRK_F("FS", "SFP-10G-T", sfp_fixup_fs_10gt), + + // Fiberstore GPON-ONU-34-20BI can operate at 2500base-X, but report 1.2GBd + // NRZ in their EEPROM + SFP_QUIRK("FS", "GPON-ONU-34-20BI", sfp_quirk_2500basex, + sfp_fixup_ignore_tx_fault), + + SFP_QUIRK_F("HALNy", "HL-GSFP", sfp_fixup_halny_gsfp), + + // HG MXPD-483II-F 2.5G supports 2500Base-X, but incorrectly reports + // 2600MBd in their EERPOM + SFP_QUIRK_M("HG GENUINE", "MXPD-483II", sfp_quirk_2500basex), + + // Huawei MA5671A can operate at 2500base-X, but report 1.2GBd NRZ in + // their EEPROM + SFP_QUIRK("HUAWEI", "MA5671A", sfp_quirk_2500basex, + sfp_fixup_ignore_tx_fault), + + // FS 2.5G Base-T + SFP_QUIRK_M("FS", "SFP-2.5G-T", sfp_quirk_oem_2_5g), + + // Lantech 8330-262D-E can operate at 2500base-X, but incorrectly report + // 2500MBd NRZ in their EEPROM + SFP_QUIRK_M("Lantech", "8330-262D-E", sfp_quirk_2500basex), + + SFP_QUIRK_M("UBNT", "UF-INSTANT", sfp_quirk_ubnt_uf_instant), + + // Walsun HXSX-ATR[CI]-1 don't identify as copper, and use the + // Rollball protocol to talk to the PHY. + SFP_QUIRK_F("Walsun", "HXSX-ATRC-1", sfp_fixup_fs_10gt), + SFP_QUIRK_F("Walsun", "HXSX-ATRI-1", sfp_fixup_fs_10gt), + + SFP_QUIRK_F("OEM", "SFP-10G-T", sfp_fixup_rollball_cc), + SFP_QUIRK_M("OEM", "SFP-2.5G-T", sfp_quirk_oem_2_5g), + SFP_QUIRK_F("OEM", "RTSFP-10", sfp_fixup_rollball_cc), + SFP_QUIRK_F("OEM", "RTSFP-10G", sfp_fixup_rollball_cc), + SFP_QUIRK_F("Turris", "RTSFP-10", sfp_fixup_rollball), + SFP_QUIRK_F("Turris", "RTSFP-10G", sfp_fixup_rollball), +}; + +static size_t sfp_strlen(const char *str, size_t maxlen) +{ + size_t size, i; + + /* Trailing characters should be filled with space chars, but + * some manufacturers can't read SFF-8472 and use NUL. + */ + for (i = 0, size = 0; i < maxlen; i++) + if (str[i] != ' ' && str[i] != '\0') + size = i + 1; + + return size; +} + +static bool sfp_match(const char *qs, const char *str, size_t len) +{ + if (!qs) + return true; + if (strlen(qs) != len) + return false; + return !strncmp(qs, str, len); +} + +static const struct sfp_quirk *sfp_lookup_quirk(const struct sfp_eeprom_id *id) +{ + const struct sfp_quirk *q; + unsigned int i; + size_t vs, ps; + + vs = sfp_strlen(id->base.vendor_name, ARRAY_SIZE(id->base.vendor_name)); + ps = sfp_strlen(id->base.vendor_pn, ARRAY_SIZE(id->base.vendor_pn)); + + for (i = 0, q = sfp_quirks; i < ARRAY_SIZE(sfp_quirks); i++, q++) + if (sfp_match(q->vendor, id->base.vendor_name, vs) && + sfp_match(q->part, id->base.vendor_pn, ps)) + return q; + + return NULL; +} + +static unsigned long poll_jiffies; + +static unsigned int sfp_gpio_get_state(struct sfp *sfp) +{ + unsigned int i, state, v; + + for (i = state = 0; i < GPIO_MAX; i++) { + if (gpio_flags[i] != GPIOD_IN || !sfp->gpio[i]) + continue; + + v = gpiod_get_value_cansleep(sfp->gpio[i]); + if (v) + state |= BIT(i); + } + + return state; +} + +static unsigned int sff_gpio_get_state(struct sfp *sfp) +{ + return sfp_gpio_get_state(sfp) | SFP_F_PRESENT; +} + +static void sfp_gpio_set_state(struct sfp *sfp, unsigned int state) +{ + unsigned int drive; + + if (state & SFP_F_PRESENT) + /* If the module is present, drive the requested signals */ + drive = sfp->state_hw_drive; + else + /* Otherwise, let them float to the pull-ups */ + drive = 0; + + if (sfp->gpio[GPIO_TX_DISABLE]) { + if (drive & SFP_F_TX_DISABLE) + gpiod_direction_output(sfp->gpio[GPIO_TX_DISABLE], + state & SFP_F_TX_DISABLE); + else + gpiod_direction_input(sfp->gpio[GPIO_TX_DISABLE]); + } + + if (sfp->gpio[GPIO_RS0]) { + if (drive & SFP_F_RS0) + gpiod_direction_output(sfp->gpio[GPIO_RS0], + state & SFP_F_RS0); + else + gpiod_direction_input(sfp->gpio[GPIO_RS0]); + } + + if (sfp->gpio[GPIO_RS1]) { + if (drive & SFP_F_RS1) + gpiod_direction_output(sfp->gpio[GPIO_RS1], + state & SFP_F_RS1); + else + gpiod_direction_input(sfp->gpio[GPIO_RS1]); + } +} + +static int sfp_i2c_read(struct sfp *sfp, bool a2, u8 dev_addr, void *buf, + size_t len) +{ + struct i2c_msg msgs[2]; + u8 bus_addr = a2 ? 0x51 : 0x50; + size_t block_size = sfp->i2c_block_size; + size_t this_len; + int ret; + + msgs[0].addr = bus_addr; + msgs[0].flags = 0; + msgs[0].len = 1; + msgs[0].buf = &dev_addr; + msgs[1].addr = bus_addr; + msgs[1].flags = I2C_M_RD; + msgs[1].len = len; + msgs[1].buf = buf; + + while (len) { + this_len = len; + if (this_len > block_size) + this_len = block_size; + + msgs[1].len = this_len; + + ret = i2c_transfer(sfp->i2c, msgs, ARRAY_SIZE(msgs)); + if (ret < 0) + return ret; + + if (ret != ARRAY_SIZE(msgs)) + break; + + msgs[1].buf += this_len; + dev_addr += this_len; + len -= this_len; + } + + return msgs[1].buf - (u8 *)buf; +} + +static int sfp_i2c_write(struct sfp *sfp, bool a2, u8 dev_addr, void *buf, + size_t len) +{ + struct i2c_msg msgs[1]; + u8 bus_addr = a2 ? 0x51 : 0x50; + int ret; + + msgs[0].addr = bus_addr; + msgs[0].flags = 0; + msgs[0].len = 1 + len; + msgs[0].buf = kmalloc(1 + len, GFP_KERNEL); + if (!msgs[0].buf) + return -ENOMEM; + + msgs[0].buf[0] = dev_addr; + memcpy(&msgs[0].buf[1], buf, len); + + ret = i2c_transfer(sfp->i2c, msgs, ARRAY_SIZE(msgs)); + + kfree(msgs[0].buf); + + if (ret < 0) + return ret; + + return ret == ARRAY_SIZE(msgs) ? len : 0; +} + +static int sfp_i2c_configure(struct sfp *sfp, struct i2c_adapter *i2c) +{ + if (!i2c_check_functionality(i2c, I2C_FUNC_I2C)) + return -EINVAL; + + sfp->i2c = i2c; + sfp->read = sfp_i2c_read; + sfp->write = sfp_i2c_write; + + return 0; +} + +static int sfp_i2c_mdiobus_create(struct sfp *sfp) +{ + struct mii_bus *i2c_mii; + int ret; + + i2c_mii = mdio_i2c_alloc(sfp->dev, sfp->i2c, sfp->mdio_protocol); + if (IS_ERR(i2c_mii)) + return PTR_ERR(i2c_mii); + + i2c_mii->name = "SFP I2C Bus"; + i2c_mii->phy_mask = ~0; + + ret = mdiobus_register(i2c_mii); + if (ret < 0) { + mdiobus_free(i2c_mii); + return ret; + } + + sfp->i2c_mii = i2c_mii; + + return 0; +} + +static void sfp_i2c_mdiobus_destroy(struct sfp *sfp) +{ + mdiobus_unregister(sfp->i2c_mii); + sfp->i2c_mii = NULL; +} + +/* Interface */ +static int sfp_read(struct sfp *sfp, bool a2, u8 addr, void *buf, size_t len) +{ + return sfp->read(sfp, a2, addr, buf, len); +} + +static int sfp_write(struct sfp *sfp, bool a2, u8 addr, void *buf, size_t len) +{ + return sfp->write(sfp, a2, addr, buf, len); +} + +static int sfp_modify_u8(struct sfp *sfp, bool a2, u8 addr, u8 mask, u8 val) +{ + int ret; + u8 old, v; + + ret = sfp_read(sfp, a2, addr, &old, sizeof(old)); + if (ret != sizeof(old)) + return ret; + + v = (old & ~mask) | (val & mask); + if (v == old) + return sizeof(v); + + return sfp_write(sfp, a2, addr, &v, sizeof(v)); +} + +static unsigned int sfp_soft_get_state(struct sfp *sfp) +{ + unsigned int state = 0; + u8 status; + int ret; + + ret = sfp_read(sfp, true, SFP_STATUS, &status, sizeof(status)); + if (ret == sizeof(status)) { + if (status & SFP_STATUS_RX_LOS) + state |= SFP_F_LOS; + if (status & SFP_STATUS_TX_FAULT) + state |= SFP_F_TX_FAULT; + } else { + dev_err_ratelimited(sfp->dev, + "failed to read SFP soft status: %pe\n", + ERR_PTR(ret)); + /* Preserve the current state */ + state = sfp->state; + } + + return state & sfp->state_soft_mask; +} + +static void sfp_soft_set_state(struct sfp *sfp, unsigned int state, + unsigned int soft) +{ + u8 mask = 0; + u8 val = 0; + + if (soft & SFP_F_TX_DISABLE) + mask |= SFP_STATUS_TX_DISABLE_FORCE; + if (state & SFP_F_TX_DISABLE) + val |= SFP_STATUS_TX_DISABLE_FORCE; + + if (soft & SFP_F_RS0) + mask |= SFP_STATUS_RS0_SELECT; + if (state & SFP_F_RS0) + val |= SFP_STATUS_RS0_SELECT; + + if (mask) + sfp_modify_u8(sfp, true, SFP_STATUS, mask, val); + + val = mask = 0; + if (soft & SFP_F_RS1) + mask |= SFP_EXT_STATUS_RS1_SELECT; + if (state & SFP_F_RS1) + val |= SFP_EXT_STATUS_RS1_SELECT; + + if (mask) + sfp_modify_u8(sfp, true, SFP_EXT_STATUS, mask, val); +} + +static void sfp_soft_start_poll(struct sfp *sfp) +{ + const struct sfp_eeprom_id *id = &sfp->id; + unsigned int mask = 0; + + if (id->ext.enhopts & SFP_ENHOPTS_SOFT_TX_DISABLE) + mask |= SFP_F_TX_DISABLE; + if (id->ext.enhopts & SFP_ENHOPTS_SOFT_TX_FAULT) + mask |= SFP_F_TX_FAULT; + if (id->ext.enhopts & SFP_ENHOPTS_SOFT_RX_LOS) + mask |= SFP_F_LOS; + if (id->ext.enhopts & SFP_ENHOPTS_SOFT_RATE_SELECT) + mask |= sfp->rs_state_mask; + + mutex_lock(&sfp->st_mutex); + // Poll the soft state for hardware pins we want to ignore + sfp->state_soft_mask = ~sfp->state_hw_mask & mask; + + if (sfp->state_soft_mask & (SFP_F_LOS | SFP_F_TX_FAULT) && + !sfp->need_poll) + mod_delayed_work(system_wq, &sfp->poll, poll_jiffies); + mutex_unlock(&sfp->st_mutex); +} + +static void sfp_soft_stop_poll(struct sfp *sfp) +{ + mutex_lock(&sfp->st_mutex); + sfp->state_soft_mask = 0; + mutex_unlock(&sfp->st_mutex); +} + +/* sfp_get_state() - must be called with st_mutex held, or in the + * initialisation path. + */ +static unsigned int sfp_get_state(struct sfp *sfp) +{ + unsigned int soft = sfp->state_soft_mask & (SFP_F_LOS | SFP_F_TX_FAULT); + unsigned int state; + + state = sfp->get_state(sfp) & sfp->state_hw_mask; + if (state & SFP_F_PRESENT && soft) + state |= sfp_soft_get_state(sfp); + + return state; +} + +/* sfp_set_state() - must be called with st_mutex held, or in the + * initialisation path. + */ +static void sfp_set_state(struct sfp *sfp, unsigned int state) +{ + unsigned int soft; + + sfp->set_state(sfp, state); + + soft = sfp->state_soft_mask & SFP_F_OUTPUTS; + if (state & SFP_F_PRESENT && soft) + sfp_soft_set_state(sfp, state, soft); +} + +static void sfp_mod_state(struct sfp *sfp, unsigned int mask, unsigned int set) +{ + mutex_lock(&sfp->st_mutex); + sfp->state = (sfp->state & ~mask) | set; + sfp_set_state(sfp, sfp->state); + mutex_unlock(&sfp->st_mutex); +} + +static unsigned int sfp_check(void *buf, size_t len) +{ + u8 *p, check; + + for (p = buf, check = 0; len; p++, len--) + check += *p; + + return check; +} + +/* hwmon */ +#if IS_ENABLED(CONFIG_HWMON) +static umode_t sfp_hwmon_is_visible(const void *data, + enum hwmon_sensor_types type, + u32 attr, int channel) +{ + const struct sfp *sfp = data; + + switch (type) { + case hwmon_temp: + switch (attr) { + case hwmon_temp_min_alarm: + case hwmon_temp_max_alarm: + case hwmon_temp_lcrit_alarm: + case hwmon_temp_crit_alarm: + case hwmon_temp_min: + case hwmon_temp_max: + case hwmon_temp_lcrit: + case hwmon_temp_crit: + if (!(sfp->id.ext.enhopts & SFP_ENHOPTS_ALARMWARN)) + return 0; + fallthrough; + case hwmon_temp_input: + case hwmon_temp_label: + return 0444; + default: + return 0; + } + case hwmon_in: + switch (attr) { + case hwmon_in_min_alarm: + case hwmon_in_max_alarm: + case hwmon_in_lcrit_alarm: + case hwmon_in_crit_alarm: + case hwmon_in_min: + case hwmon_in_max: + case hwmon_in_lcrit: + case hwmon_in_crit: + if (!(sfp->id.ext.enhopts & SFP_ENHOPTS_ALARMWARN)) + return 0; + fallthrough; + case hwmon_in_input: + case hwmon_in_label: + return 0444; + default: + return 0; + } + case hwmon_curr: + switch (attr) { + case hwmon_curr_min_alarm: + case hwmon_curr_max_alarm: + case hwmon_curr_lcrit_alarm: + case hwmon_curr_crit_alarm: + case hwmon_curr_min: + case hwmon_curr_max: + case hwmon_curr_lcrit: + case hwmon_curr_crit: + if (!(sfp->id.ext.enhopts & SFP_ENHOPTS_ALARMWARN)) + return 0; + fallthrough; + case hwmon_curr_input: + case hwmon_curr_label: + return 0444; + default: + return 0; + } + case hwmon_power: + /* External calibration of receive power requires + * floating point arithmetic. Doing that in the kernel + * is not easy, so just skip it. If the module does + * not require external calibration, we can however + * show receiver power, since FP is then not needed. + */ + if (sfp->id.ext.diagmon & SFP_DIAGMON_EXT_CAL && + channel == 1) + return 0; + switch (attr) { + case hwmon_power_min_alarm: + case hwmon_power_max_alarm: + case hwmon_power_lcrit_alarm: + case hwmon_power_crit_alarm: + case hwmon_power_min: + case hwmon_power_max: + case hwmon_power_lcrit: + case hwmon_power_crit: + if (!(sfp->id.ext.enhopts & SFP_ENHOPTS_ALARMWARN)) + return 0; + fallthrough; + case hwmon_power_input: + case hwmon_power_label: + return 0444; + default: + return 0; + } + default: + return 0; + } +} + +static int sfp_hwmon_read_sensor(struct sfp *sfp, int reg, long *value) +{ + __be16 val; + int err; + + err = sfp_read(sfp, true, reg, &val, sizeof(val)); + if (err < 0) + return err; + + *value = be16_to_cpu(val); + + return 0; +} + +static void sfp_hwmon_to_rx_power(long *value) +{ + *value = DIV_ROUND_CLOSEST(*value, 10); +} + +static void sfp_hwmon_calibrate(struct sfp *sfp, unsigned int slope, int offset, + long *value) +{ + if (sfp->id.ext.diagmon & SFP_DIAGMON_EXT_CAL) + *value = DIV_ROUND_CLOSEST(*value * slope, 256) + offset; +} + +static void sfp_hwmon_calibrate_temp(struct sfp *sfp, long *value) +{ + sfp_hwmon_calibrate(sfp, be16_to_cpu(sfp->diag.cal_t_slope), + be16_to_cpu(sfp->diag.cal_t_offset), value); + + if (*value >= 0x8000) + *value -= 0x10000; + + *value = DIV_ROUND_CLOSEST(*value * 1000, 256); +} + +static void sfp_hwmon_calibrate_vcc(struct sfp *sfp, long *value) +{ + sfp_hwmon_calibrate(sfp, be16_to_cpu(sfp->diag.cal_v_slope), + be16_to_cpu(sfp->diag.cal_v_offset), value); + + *value = DIV_ROUND_CLOSEST(*value, 10); +} + +static void sfp_hwmon_calibrate_bias(struct sfp *sfp, long *value) +{ + sfp_hwmon_calibrate(sfp, be16_to_cpu(sfp->diag.cal_txi_slope), + be16_to_cpu(sfp->diag.cal_txi_offset), value); + + *value = DIV_ROUND_CLOSEST(*value, 500); +} + +static void sfp_hwmon_calibrate_tx_power(struct sfp *sfp, long *value) +{ + sfp_hwmon_calibrate(sfp, be16_to_cpu(sfp->diag.cal_txpwr_slope), + be16_to_cpu(sfp->diag.cal_txpwr_offset), value); + + *value = DIV_ROUND_CLOSEST(*value, 10); +} + +static int sfp_hwmon_read_temp(struct sfp *sfp, int reg, long *value) +{ + int err; + + err = sfp_hwmon_read_sensor(sfp, reg, value); + if (err < 0) + return err; + + sfp_hwmon_calibrate_temp(sfp, value); + + return 0; +} + +static int sfp_hwmon_read_vcc(struct sfp *sfp, int reg, long *value) +{ + int err; + + err = sfp_hwmon_read_sensor(sfp, reg, value); + if (err < 0) + return err; + + sfp_hwmon_calibrate_vcc(sfp, value); + + return 0; +} + +static int sfp_hwmon_read_bias(struct sfp *sfp, int reg, long *value) +{ + int err; + + err = sfp_hwmon_read_sensor(sfp, reg, value); + if (err < 0) + return err; + + sfp_hwmon_calibrate_bias(sfp, value); + + return 0; +} + +static int sfp_hwmon_read_tx_power(struct sfp *sfp, int reg, long *value) +{ + int err; + + err = sfp_hwmon_read_sensor(sfp, reg, value); + if (err < 0) + return err; + + sfp_hwmon_calibrate_tx_power(sfp, value); + + return 0; +} + +static int sfp_hwmon_read_rx_power(struct sfp *sfp, int reg, long *value) +{ + int err; + + err = sfp_hwmon_read_sensor(sfp, reg, value); + if (err < 0) + return err; + + sfp_hwmon_to_rx_power(value); + + return 0; +} + +static int sfp_hwmon_temp(struct sfp *sfp, u32 attr, long *value) +{ + u8 status; + int err; + + switch (attr) { + case hwmon_temp_input: + return sfp_hwmon_read_temp(sfp, SFP_TEMP, value); + + case hwmon_temp_lcrit: + *value = be16_to_cpu(sfp->diag.temp_low_alarm); + sfp_hwmon_calibrate_temp(sfp, value); + return 0; + + case hwmon_temp_min: + *value = be16_to_cpu(sfp->diag.temp_low_warn); + sfp_hwmon_calibrate_temp(sfp, value); + return 0; + case hwmon_temp_max: + *value = be16_to_cpu(sfp->diag.temp_high_warn); + sfp_hwmon_calibrate_temp(sfp, value); + return 0; + + case hwmon_temp_crit: + *value = be16_to_cpu(sfp->diag.temp_high_alarm); + sfp_hwmon_calibrate_temp(sfp, value); + return 0; + + case hwmon_temp_lcrit_alarm: + err = sfp_read(sfp, true, SFP_ALARM0, &status, sizeof(status)); + if (err < 0) + return err; + + *value = !!(status & SFP_ALARM0_TEMP_LOW); + return 0; + + case hwmon_temp_min_alarm: + err = sfp_read(sfp, true, SFP_WARN0, &status, sizeof(status)); + if (err < 0) + return err; + + *value = !!(status & SFP_WARN0_TEMP_LOW); + return 0; + + case hwmon_temp_max_alarm: + err = sfp_read(sfp, true, SFP_WARN0, &status, sizeof(status)); + if (err < 0) + return err; + + *value = !!(status & SFP_WARN0_TEMP_HIGH); + return 0; + + case hwmon_temp_crit_alarm: + err = sfp_read(sfp, true, SFP_ALARM0, &status, sizeof(status)); + if (err < 0) + return err; + + *value = !!(status & SFP_ALARM0_TEMP_HIGH); + return 0; + default: + return -EOPNOTSUPP; + } + + return -EOPNOTSUPP; +} + +static int sfp_hwmon_vcc(struct sfp *sfp, u32 attr, long *value) +{ + u8 status; + int err; + + switch (attr) { + case hwmon_in_input: + return sfp_hwmon_read_vcc(sfp, SFP_VCC, value); + + case hwmon_in_lcrit: + *value = be16_to_cpu(sfp->diag.volt_low_alarm); + sfp_hwmon_calibrate_vcc(sfp, value); + return 0; + + case hwmon_in_min: + *value = be16_to_cpu(sfp->diag.volt_low_warn); + sfp_hwmon_calibrate_vcc(sfp, value); + return 0; + + case hwmon_in_max: + *value = be16_to_cpu(sfp->diag.volt_high_warn); + sfp_hwmon_calibrate_vcc(sfp, value); + return 0; + + case hwmon_in_crit: + *value = be16_to_cpu(sfp->diag.volt_high_alarm); + sfp_hwmon_calibrate_vcc(sfp, value); + return 0; + + case hwmon_in_lcrit_alarm: + err = sfp_read(sfp, true, SFP_ALARM0, &status, sizeof(status)); + if (err < 0) + return err; + + *value = !!(status & SFP_ALARM0_VCC_LOW); + return 0; + + case hwmon_in_min_alarm: + err = sfp_read(sfp, true, SFP_WARN0, &status, sizeof(status)); + if (err < 0) + return err; + + *value = !!(status & SFP_WARN0_VCC_LOW); + return 0; + + case hwmon_in_max_alarm: + err = sfp_read(sfp, true, SFP_WARN0, &status, sizeof(status)); + if (err < 0) + return err; + + *value = !!(status & SFP_WARN0_VCC_HIGH); + return 0; + + case hwmon_in_crit_alarm: + err = sfp_read(sfp, true, SFP_ALARM0, &status, sizeof(status)); + if (err < 0) + return err; + + *value = !!(status & SFP_ALARM0_VCC_HIGH); + return 0; + default: + return -EOPNOTSUPP; + } + + return -EOPNOTSUPP; +} + +static int sfp_hwmon_bias(struct sfp *sfp, u32 attr, long *value) +{ + u8 status; + int err; + + switch (attr) { + case hwmon_curr_input: + return sfp_hwmon_read_bias(sfp, SFP_TX_BIAS, value); + + case hwmon_curr_lcrit: + *value = be16_to_cpu(sfp->diag.bias_low_alarm); + sfp_hwmon_calibrate_bias(sfp, value); + return 0; + + case hwmon_curr_min: + *value = be16_to_cpu(sfp->diag.bias_low_warn); + sfp_hwmon_calibrate_bias(sfp, value); + return 0; + + case hwmon_curr_max: + *value = be16_to_cpu(sfp->diag.bias_high_warn); + sfp_hwmon_calibrate_bias(sfp, value); + return 0; + + case hwmon_curr_crit: + *value = be16_to_cpu(sfp->diag.bias_high_alarm); + sfp_hwmon_calibrate_bias(sfp, value); + return 0; + + case hwmon_curr_lcrit_alarm: + err = sfp_read(sfp, true, SFP_ALARM0, &status, sizeof(status)); + if (err < 0) + return err; + + *value = !!(status & SFP_ALARM0_TX_BIAS_LOW); + return 0; + + case hwmon_curr_min_alarm: + err = sfp_read(sfp, true, SFP_WARN0, &status, sizeof(status)); + if (err < 0) + return err; + + *value = !!(status & SFP_WARN0_TX_BIAS_LOW); + return 0; + + case hwmon_curr_max_alarm: + err = sfp_read(sfp, true, SFP_WARN0, &status, sizeof(status)); + if (err < 0) + return err; + + *value = !!(status & SFP_WARN0_TX_BIAS_HIGH); + return 0; + + case hwmon_curr_crit_alarm: + err = sfp_read(sfp, true, SFP_ALARM0, &status, sizeof(status)); + if (err < 0) + return err; + + *value = !!(status & SFP_ALARM0_TX_BIAS_HIGH); + return 0; + default: + return -EOPNOTSUPP; + } + + return -EOPNOTSUPP; +} + +static int sfp_hwmon_tx_power(struct sfp *sfp, u32 attr, long *value) +{ + u8 status; + int err; + + switch (attr) { + case hwmon_power_input: + return sfp_hwmon_read_tx_power(sfp, SFP_TX_POWER, value); + + case hwmon_power_lcrit: + *value = be16_to_cpu(sfp->diag.txpwr_low_alarm); + sfp_hwmon_calibrate_tx_power(sfp, value); + return 0; + + case hwmon_power_min: + *value = be16_to_cpu(sfp->diag.txpwr_low_warn); + sfp_hwmon_calibrate_tx_power(sfp, value); + return 0; + + case hwmon_power_max: + *value = be16_to_cpu(sfp->diag.txpwr_high_warn); + sfp_hwmon_calibrate_tx_power(sfp, value); + return 0; + + case hwmon_power_crit: + *value = be16_to_cpu(sfp->diag.txpwr_high_alarm); + sfp_hwmon_calibrate_tx_power(sfp, value); + return 0; + + case hwmon_power_lcrit_alarm: + err = sfp_read(sfp, true, SFP_ALARM0, &status, sizeof(status)); + if (err < 0) + return err; + + *value = !!(status & SFP_ALARM0_TXPWR_LOW); + return 0; + + case hwmon_power_min_alarm: + err = sfp_read(sfp, true, SFP_WARN0, &status, sizeof(status)); + if (err < 0) + return err; + + *value = !!(status & SFP_WARN0_TXPWR_LOW); + return 0; + + case hwmon_power_max_alarm: + err = sfp_read(sfp, true, SFP_WARN0, &status, sizeof(status)); + if (err < 0) + return err; + + *value = !!(status & SFP_WARN0_TXPWR_HIGH); + return 0; + + case hwmon_power_crit_alarm: + err = sfp_read(sfp, true, SFP_ALARM0, &status, sizeof(status)); + if (err < 0) + return err; + + *value = !!(status & SFP_ALARM0_TXPWR_HIGH); + return 0; + default: + return -EOPNOTSUPP; + } + + return -EOPNOTSUPP; +} + +static int sfp_hwmon_rx_power(struct sfp *sfp, u32 attr, long *value) +{ + u8 status; + int err; + + switch (attr) { + case hwmon_power_input: + return sfp_hwmon_read_rx_power(sfp, SFP_RX_POWER, value); + + case hwmon_power_lcrit: + *value = be16_to_cpu(sfp->diag.rxpwr_low_alarm); + sfp_hwmon_to_rx_power(value); + return 0; + + case hwmon_power_min: + *value = be16_to_cpu(sfp->diag.rxpwr_low_warn); + sfp_hwmon_to_rx_power(value); + return 0; + + case hwmon_power_max: + *value = be16_to_cpu(sfp->diag.rxpwr_high_warn); + sfp_hwmon_to_rx_power(value); + return 0; + + case hwmon_power_crit: + *value = be16_to_cpu(sfp->diag.rxpwr_high_alarm); + sfp_hwmon_to_rx_power(value); + return 0; + + case hwmon_power_lcrit_alarm: + err = sfp_read(sfp, true, SFP_ALARM1, &status, sizeof(status)); + if (err < 0) + return err; + + *value = !!(status & SFP_ALARM1_RXPWR_LOW); + return 0; + + case hwmon_power_min_alarm: + err = sfp_read(sfp, true, SFP_WARN1, &status, sizeof(status)); + if (err < 0) + return err; + + *value = !!(status & SFP_WARN1_RXPWR_LOW); + return 0; + + case hwmon_power_max_alarm: + err = sfp_read(sfp, true, SFP_WARN1, &status, sizeof(status)); + if (err < 0) + return err; + + *value = !!(status & SFP_WARN1_RXPWR_HIGH); + return 0; + + case hwmon_power_crit_alarm: + err = sfp_read(sfp, true, SFP_ALARM1, &status, sizeof(status)); + if (err < 0) + return err; + + *value = !!(status & SFP_ALARM1_RXPWR_HIGH); + return 0; + default: + return -EOPNOTSUPP; + } + + return -EOPNOTSUPP; +} + +static int sfp_hwmon_read(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long *value) +{ + struct sfp *sfp = dev_get_drvdata(dev); + + switch (type) { + case hwmon_temp: + return sfp_hwmon_temp(sfp, attr, value); + case hwmon_in: + return sfp_hwmon_vcc(sfp, attr, value); + case hwmon_curr: + return sfp_hwmon_bias(sfp, attr, value); + case hwmon_power: + switch (channel) { + case 0: + return sfp_hwmon_tx_power(sfp, attr, value); + case 1: + return sfp_hwmon_rx_power(sfp, attr, value); + default: + return -EOPNOTSUPP; + } + default: + return -EOPNOTSUPP; + } +} + +static const char *const sfp_hwmon_power_labels[] = { + "TX_power", + "RX_power", +}; + +static int sfp_hwmon_read_string(struct device *dev, + enum hwmon_sensor_types type, + u32 attr, int channel, const char **str) +{ + switch (type) { + case hwmon_curr: + switch (attr) { + case hwmon_curr_label: + *str = "bias"; + return 0; + default: + return -EOPNOTSUPP; + } + break; + case hwmon_temp: + switch (attr) { + case hwmon_temp_label: + *str = "temperature"; + return 0; + default: + return -EOPNOTSUPP; + } + break; + case hwmon_in: + switch (attr) { + case hwmon_in_label: + *str = "VCC"; + return 0; + default: + return -EOPNOTSUPP; + } + break; + case hwmon_power: + switch (attr) { + case hwmon_power_label: + *str = sfp_hwmon_power_labels[channel]; + return 0; + default: + return -EOPNOTSUPP; + } + break; + default: + return -EOPNOTSUPP; + } + + return -EOPNOTSUPP; +} + +static const struct hwmon_ops sfp_hwmon_ops = { + .is_visible = sfp_hwmon_is_visible, + .read = sfp_hwmon_read, + .read_string = sfp_hwmon_read_string, +}; + +static const struct hwmon_channel_info * const sfp_hwmon_info[] = { + HWMON_CHANNEL_INFO(chip, + HWMON_C_REGISTER_TZ), + HWMON_CHANNEL_INFO(in, + HWMON_I_INPUT | + HWMON_I_MAX | HWMON_I_MIN | + HWMON_I_MAX_ALARM | HWMON_I_MIN_ALARM | + HWMON_I_CRIT | HWMON_I_LCRIT | + HWMON_I_CRIT_ALARM | HWMON_I_LCRIT_ALARM | + HWMON_I_LABEL), + HWMON_CHANNEL_INFO(temp, + HWMON_T_INPUT | + HWMON_T_MAX | HWMON_T_MIN | + HWMON_T_MAX_ALARM | HWMON_T_MIN_ALARM | + HWMON_T_CRIT | HWMON_T_LCRIT | + HWMON_T_CRIT_ALARM | HWMON_T_LCRIT_ALARM | + HWMON_T_LABEL), + HWMON_CHANNEL_INFO(curr, + HWMON_C_INPUT | + HWMON_C_MAX | HWMON_C_MIN | + HWMON_C_MAX_ALARM | HWMON_C_MIN_ALARM | + HWMON_C_CRIT | HWMON_C_LCRIT | + HWMON_C_CRIT_ALARM | HWMON_C_LCRIT_ALARM | + HWMON_C_LABEL), + HWMON_CHANNEL_INFO(power, + /* Transmit power */ + HWMON_P_INPUT | + HWMON_P_MAX | HWMON_P_MIN | + HWMON_P_MAX_ALARM | HWMON_P_MIN_ALARM | + HWMON_P_CRIT | HWMON_P_LCRIT | + HWMON_P_CRIT_ALARM | HWMON_P_LCRIT_ALARM | + HWMON_P_LABEL, + /* Receive power */ + HWMON_P_INPUT | + HWMON_P_MAX | HWMON_P_MIN | + HWMON_P_MAX_ALARM | HWMON_P_MIN_ALARM | + HWMON_P_CRIT | HWMON_P_LCRIT | + HWMON_P_CRIT_ALARM | HWMON_P_LCRIT_ALARM | + HWMON_P_LABEL), + NULL, +}; + +static const struct hwmon_chip_info sfp_hwmon_chip_info = { + .ops = &sfp_hwmon_ops, + .info = sfp_hwmon_info, +}; + +static void sfp_hwmon_probe(struct work_struct *work) +{ + struct sfp *sfp = container_of(work, struct sfp, hwmon_probe.work); + int err; + + /* hwmon interface needs to access 16bit registers in atomic way to + * guarantee coherency of the diagnostic monitoring data. If it is not + * possible to guarantee coherency because EEPROM is broken in such way + * that does not support atomic 16bit read operation then we have to + * skip registration of hwmon device. + */ + if (sfp->i2c_block_size < 2) { + dev_info(sfp->dev, + "skipping hwmon device registration due to broken EEPROM\n"); + dev_info(sfp->dev, + "diagnostic EEPROM area cannot be read atomically to guarantee data coherency\n"); + return; + } + + err = sfp_read(sfp, true, 0, &sfp->diag, sizeof(sfp->diag)); + if (err < 0) { + if (sfp->hwmon_tries--) { + mod_delayed_work(system_wq, &sfp->hwmon_probe, + T_PROBE_RETRY_SLOW); + } else { + dev_warn(sfp->dev, "hwmon probe failed: %pe\n", + ERR_PTR(err)); + } + return; + } + + sfp->hwmon_name = hwmon_sanitize_name(dev_name(sfp->dev)); + if (IS_ERR(sfp->hwmon_name)) { + dev_err(sfp->dev, "out of memory for hwmon name\n"); + return; + } + + sfp->hwmon_dev = hwmon_device_register_with_info(sfp->dev, + sfp->hwmon_name, sfp, + &sfp_hwmon_chip_info, + NULL); + if (IS_ERR(sfp->hwmon_dev)) + dev_err(sfp->dev, "failed to register hwmon device: %ld\n", + PTR_ERR(sfp->hwmon_dev)); +} + +static int sfp_hwmon_insert(struct sfp *sfp) +{ + if (sfp->have_a2 && sfp->id.ext.diagmon & SFP_DIAGMON_DDM) { + mod_delayed_work(system_wq, &sfp->hwmon_probe, 1); + sfp->hwmon_tries = R_PROBE_RETRY_SLOW; + } + + return 0; +} + +static void sfp_hwmon_remove(struct sfp *sfp) +{ + cancel_delayed_work_sync(&sfp->hwmon_probe); + if (!IS_ERR_OR_NULL(sfp->hwmon_dev)) { + hwmon_device_unregister(sfp->hwmon_dev); + sfp->hwmon_dev = NULL; + kfree(sfp->hwmon_name); + } +} + +static int sfp_hwmon_init(struct sfp *sfp) +{ + INIT_DELAYED_WORK(&sfp->hwmon_probe, sfp_hwmon_probe); + + return 0; +} + +static void sfp_hwmon_exit(struct sfp *sfp) +{ + cancel_delayed_work_sync(&sfp->hwmon_probe); +} +#else +static int sfp_hwmon_insert(struct sfp *sfp) +{ + return 0; +} + +static void sfp_hwmon_remove(struct sfp *sfp) +{ +} + +static int sfp_hwmon_init(struct sfp *sfp) +{ + return 0; +} + +static void sfp_hwmon_exit(struct sfp *sfp) +{ +} +#endif + +/* Helpers */ +static void sfp_module_tx_disable(struct sfp *sfp) +{ + dev_dbg(sfp->dev, "tx disable %u -> %u\n", + sfp->state & SFP_F_TX_DISABLE ? 1 : 0, 1); + sfp_mod_state(sfp, SFP_F_TX_DISABLE, SFP_F_TX_DISABLE); +} + +static void sfp_module_tx_enable(struct sfp *sfp) +{ + dev_dbg(sfp->dev, "tx disable %u -> %u\n", + sfp->state & SFP_F_TX_DISABLE ? 1 : 0, 0); + sfp_mod_state(sfp, SFP_F_TX_DISABLE, 0); +} + +#if IS_ENABLED(CONFIG_DEBUG_FS) +static int sfp_debug_state_show(struct seq_file *s, void *data) +{ + struct sfp *sfp = s->private; + + seq_printf(s, "Module state: %s\n", + mod_state_to_str(sfp->sm_mod_state)); + seq_printf(s, "Module probe attempts: %d %d\n", + R_PROBE_RETRY_INIT - sfp->sm_mod_tries_init, + R_PROBE_RETRY_SLOW - sfp->sm_mod_tries); + seq_printf(s, "Device state: %s\n", + dev_state_to_str(sfp->sm_dev_state)); + seq_printf(s, "Main state: %s\n", + sm_state_to_str(sfp->sm_state)); + seq_printf(s, "Fault recovery remaining retries: %d\n", + sfp->sm_fault_retries); + seq_printf(s, "PHY probe remaining retries: %d\n", + sfp->sm_phy_retries); + seq_printf(s, "Signalling rate: %u kBd\n", sfp->rate_kbd); + seq_printf(s, "Rate select threshold: %u kBd\n", + sfp->rs_threshold_kbd); + seq_printf(s, "moddef0: %d\n", !!(sfp->state & SFP_F_PRESENT)); + seq_printf(s, "rx_los: %d\n", !!(sfp->state & SFP_F_LOS)); + seq_printf(s, "tx_fault: %d\n", !!(sfp->state & SFP_F_TX_FAULT)); + seq_printf(s, "tx_disable: %d\n", !!(sfp->state & SFP_F_TX_DISABLE)); + seq_printf(s, "rs0: %d\n", !!(sfp->state & SFP_F_RS0)); + seq_printf(s, "rs1: %d\n", !!(sfp->state & SFP_F_RS1)); + return 0; +} +DEFINE_SHOW_ATTRIBUTE(sfp_debug_state); + +static void sfp_debugfs_init(struct sfp *sfp) +{ + sfp->debugfs_dir = debugfs_create_dir(dev_name(sfp->dev), NULL); + + debugfs_create_file("state", 0600, sfp->debugfs_dir, sfp, + &sfp_debug_state_fops); +} + +static void sfp_debugfs_exit(struct sfp *sfp) +{ + debugfs_remove_recursive(sfp->debugfs_dir); +} +#else +static void sfp_debugfs_init(struct sfp *sfp) +{ +} + +static void sfp_debugfs_exit(struct sfp *sfp) +{ +} +#endif + +static void sfp_module_tx_fault_reset(struct sfp *sfp) +{ + unsigned int state; + + mutex_lock(&sfp->st_mutex); + state = sfp->state; + if (!(state & SFP_F_TX_DISABLE)) { + sfp_set_state(sfp, state | SFP_F_TX_DISABLE); + + udelay(T_RESET_US); + + sfp_set_state(sfp, state); + } + mutex_unlock(&sfp->st_mutex); +} + +/* SFP state machine */ +static void sfp_sm_set_timer(struct sfp *sfp, unsigned int timeout) +{ + if (timeout) + mod_delayed_work(system_power_efficient_wq, &sfp->timeout, + timeout); + else + cancel_delayed_work(&sfp->timeout); +} + +static void sfp_sm_next(struct sfp *sfp, unsigned int state, + unsigned int timeout) +{ + sfp->sm_state = state; + sfp_sm_set_timer(sfp, timeout); +} + +static void sfp_sm_mod_next(struct sfp *sfp, unsigned int state, + unsigned int timeout) +{ + sfp->sm_mod_state = state; + sfp_sm_set_timer(sfp, timeout); +} + +static void sfp_sm_phy_detach(struct sfp *sfp) +{ + sfp_remove_phy(sfp->sfp_bus); + phy_device_remove(sfp->mod_phy); + phy_device_free(sfp->mod_phy); + sfp->mod_phy = NULL; +} + +static int sfp_sm_probe_phy(struct sfp *sfp, int addr, bool is_c45) +{ + struct phy_device *phy; + int err; + + phy = get_phy_device(sfp->i2c_mii, addr, is_c45); + if (phy == ERR_PTR(-ENODEV)) + return PTR_ERR(phy); + if (IS_ERR(phy)) { + dev_err(sfp->dev, "mdiobus scan returned %pe\n", phy); + return PTR_ERR(phy); + } + + /* Mark this PHY as being on a SFP module */ + phy->is_on_sfp_module = true; + + err = phy_device_register(phy); + if (err) { + phy_device_free(phy); + dev_err(sfp->dev, "phy_device_register failed: %pe\n", + ERR_PTR(err)); + return err; + } + + err = sfp_add_phy(sfp->sfp_bus, phy); + if (err) { + phy_device_remove(phy); + phy_device_free(phy); + dev_err(sfp->dev, "sfp_add_phy failed: %pe\n", ERR_PTR(err)); + return err; + } + + sfp->mod_phy = phy; + + return 0; +} + +static void sfp_sm_link_up(struct sfp *sfp) +{ + sfp_link_up(sfp->sfp_bus); + sfp_sm_next(sfp, SFP_S_LINK_UP, 0); +} + +static void sfp_sm_link_down(struct sfp *sfp) +{ + sfp_link_down(sfp->sfp_bus); +} + +static void sfp_sm_link_check_los(struct sfp *sfp) +{ + const __be16 los_inverted = cpu_to_be16(SFP_OPTIONS_LOS_INVERTED); + const __be16 los_normal = cpu_to_be16(SFP_OPTIONS_LOS_NORMAL); + __be16 los_options = sfp->id.ext.options & (los_inverted | los_normal); + bool los = false; + + /* If neither SFP_OPTIONS_LOS_INVERTED nor SFP_OPTIONS_LOS_NORMAL + * are set, we assume that no LOS signal is available. If both are + * set, we assume LOS is not implemented (and is meaningless.) + */ + if (los_options == los_inverted) + los = !(sfp->state & SFP_F_LOS); + else if (los_options == los_normal) + los = !!(sfp->state & SFP_F_LOS); + + if (los) + sfp_sm_next(sfp, SFP_S_WAIT_LOS, 0); + else + sfp_sm_link_up(sfp); +} + +static bool sfp_los_event_active(struct sfp *sfp, unsigned int event) +{ + const __be16 los_inverted = cpu_to_be16(SFP_OPTIONS_LOS_INVERTED); + const __be16 los_normal = cpu_to_be16(SFP_OPTIONS_LOS_NORMAL); + __be16 los_options = sfp->id.ext.options & (los_inverted | los_normal); + + return (los_options == los_inverted && event == SFP_E_LOS_LOW) || + (los_options == los_normal && event == SFP_E_LOS_HIGH); +} + +static bool sfp_los_event_inactive(struct sfp *sfp, unsigned int event) +{ + const __be16 los_inverted = cpu_to_be16(SFP_OPTIONS_LOS_INVERTED); + const __be16 los_normal = cpu_to_be16(SFP_OPTIONS_LOS_NORMAL); + __be16 los_options = sfp->id.ext.options & (los_inverted | los_normal); + + return (los_options == los_inverted && event == SFP_E_LOS_HIGH) || + (los_options == los_normal && event == SFP_E_LOS_LOW); +} + +static void sfp_sm_fault(struct sfp *sfp, unsigned int next_state, bool warn) +{ + if (sfp->sm_fault_retries && !--sfp->sm_fault_retries) { + dev_err(sfp->dev, + "module persistently indicates fault, disabling\n"); + sfp_sm_next(sfp, SFP_S_TX_DISABLE, 0); + } else { + if (warn) + dev_err(sfp->dev, "module transmit fault indicated\n"); + + sfp_sm_next(sfp, next_state, T_FAULT_RECOVER); + } +} + +static int sfp_sm_add_mdio_bus(struct sfp *sfp) +{ + if (sfp->mdio_protocol != MDIO_I2C_NONE) + return sfp_i2c_mdiobus_create(sfp); + + return 0; +} + +/* Probe a SFP for a PHY device if the module supports copper - the PHY + * normally sits at I2C bus address 0x56, and may either be a clause 22 + * or clause 45 PHY. + * + * Clause 22 copper SFP modules normally operate in Cisco SGMII mode with + * negotiation enabled, but some may be in 1000base-X - which is for the + * PHY driver to determine. + * + * Clause 45 copper SFP+ modules (10G) appear to switch their interface + * mode according to the negotiated line speed. + */ +static int sfp_sm_probe_for_phy(struct sfp *sfp) +{ + int err = 0; + + switch (sfp->mdio_protocol) { + case MDIO_I2C_NONE: + break; + + case MDIO_I2C_MARVELL_C22: + err = sfp_sm_probe_phy(sfp, SFP_PHY_ADDR, false); + break; + + case MDIO_I2C_C45: + err = sfp_sm_probe_phy(sfp, SFP_PHY_ADDR, true); + break; + + case MDIO_I2C_ROLLBALL: + err = sfp_sm_probe_phy(sfp, SFP_PHY_ADDR_ROLLBALL, true); + break; + } + + return err; +} + +static int sfp_module_parse_power(struct sfp *sfp) +{ + u32 power_mW = 1000; + bool supports_a2; + + if (sfp->id.ext.sff8472_compliance >= SFP_SFF8472_COMPLIANCE_REV10_2 && + sfp->id.ext.options & cpu_to_be16(SFP_OPTIONS_POWER_DECL)) + power_mW = 1500; + /* Added in Rev 11.9, but there is no compliance code for this */ + if (sfp->id.ext.sff8472_compliance >= SFP_SFF8472_COMPLIANCE_REV11_4 && + sfp->id.ext.options & cpu_to_be16(SFP_OPTIONS_HIGH_POWER_LEVEL)) + power_mW = 2000; + + /* Power level 1 modules (max. 1W) are always supported. */ + if (power_mW <= 1000) { + sfp->module_power_mW = power_mW; + return 0; + } + + supports_a2 = sfp->id.ext.sff8472_compliance != + SFP_SFF8472_COMPLIANCE_NONE || + sfp->id.ext.diagmon & SFP_DIAGMON_DDM; + + if (power_mW > sfp->max_power_mW) { + /* Module power specification exceeds the allowed maximum. */ + if (!supports_a2) { + /* The module appears not to implement bus address + * 0xa2, so assume that the module powers up in the + * indicated mode. + */ + dev_err(sfp->dev, + "Host does not support %u.%uW modules\n", + power_mW / 1000, (power_mW / 100) % 10); + return -EINVAL; + } else { + dev_warn(sfp->dev, + "Host does not support %u.%uW modules, module left in power mode 1\n", + power_mW / 1000, (power_mW / 100) % 10); + return 0; + } + } + + if (!supports_a2) { + /* The module power level is below the host maximum and the + * module appears not to implement bus address 0xa2, so assume + * that the module powers up in the indicated mode. + */ + return 0; + } + + /* If the module requires a higher power mode, but also requires + * an address change sequence, warn the user that the module may + * not be functional. + */ + if (sfp->id.ext.diagmon & SFP_DIAGMON_ADDRMODE) { + dev_warn(sfp->dev, + "Address Change Sequence not supported but module requires %u.%uW, module may not be functional\n", + power_mW / 1000, (power_mW / 100) % 10); + return 0; + } + + sfp->module_power_mW = power_mW; + + return 0; +} + +static int sfp_sm_mod_hpower(struct sfp *sfp, bool enable) +{ + int err; + + err = sfp_modify_u8(sfp, true, SFP_EXT_STATUS, + SFP_EXT_STATUS_PWRLVL_SELECT, + enable ? SFP_EXT_STATUS_PWRLVL_SELECT : 0); + if (err != sizeof(u8)) { + dev_err(sfp->dev, "failed to %sable high power: %pe\n", + enable ? "en" : "dis", ERR_PTR(err)); + return -EAGAIN; + } + + if (enable) + dev_info(sfp->dev, "Module switched to %u.%uW power level\n", + sfp->module_power_mW / 1000, + (sfp->module_power_mW / 100) % 10); + + return 0; +} + +static void sfp_module_parse_rate_select(struct sfp *sfp) +{ + u8 rate_id; + + sfp->rs_threshold_kbd = 0; + sfp->rs_state_mask = 0; + + if (!(sfp->id.ext.options & cpu_to_be16(SFP_OPTIONS_RATE_SELECT))) + /* No support for RateSelect */ + return; + + /* Default to INF-8074 RateSelect operation. The signalling threshold + * rate is not well specified, so always select "Full Bandwidth", but + * SFF-8079 reveals that it is understood that RS0 will be low for + * 1.0625Gb/s and high for 2.125Gb/s. Choose a value half-way between. + * This method exists prior to SFF-8472. + */ + sfp->rs_state_mask = SFP_F_RS0; + sfp->rs_threshold_kbd = 1594; + + /* Parse the rate identifier, which is complicated due to history: + * SFF-8472 rev 9.5 marks this field as reserved. + * SFF-8079 references SFF-8472 rev 9.5 and defines bit 0. SFF-8472 + * compliance is not required. + * SFF-8472 rev 10.2 defines this field using values 0..4 + * SFF-8472 rev 11.0 redefines this field with bit 0 for SFF-8079 + * and even values. + */ + rate_id = sfp->id.base.rate_id; + if (rate_id == 0) + /* Unspecified */ + return; + + /* SFF-8472 rev 10.0..10.4 did not account for SFF-8079 using bit 0, + * and allocated value 3 to SFF-8431 independent tx/rx rate select. + * Convert this to a SFF-8472 rev 11.0 rate identifier. + */ + if (sfp->id.ext.sff8472_compliance >= SFP_SFF8472_COMPLIANCE_REV10_2 && + sfp->id.ext.sff8472_compliance < SFP_SFF8472_COMPLIANCE_REV11_0 && + rate_id == 3) + rate_id = SFF_RID_8431; + + if (rate_id & SFF_RID_8079) { + /* SFF-8079 RateSelect / Application Select in conjunction with + * SFF-8472 rev 9.5. SFF-8079 defines rate_id as a bitfield + * with only bit 0 used, which takes precedence over SFF-8472. + */ + if (!(sfp->id.ext.enhopts & SFP_ENHOPTS_APP_SELECT_SFF8079)) { + /* SFF-8079 Part 1 - rate selection between Fibre + * Channel 1.0625/2.125/4.25 Gbd modes. Note that RS0 + * is high for 2125, so we have to subtract 1 to + * include it. + */ + sfp->rs_threshold_kbd = 2125 - 1; + sfp->rs_state_mask = SFP_F_RS0; + } + return; + } + + /* SFF-8472 rev 9.5 does not define the rate identifier */ + if (sfp->id.ext.sff8472_compliance <= SFP_SFF8472_COMPLIANCE_REV9_5) + return; + + /* SFF-8472 rev 11.0 defines rate_id as a numerical value which will + * always have bit 0 clear due to SFF-8079's bitfield usage of rate_id. + */ + switch (rate_id) { + case SFF_RID_8431_RX_ONLY: + sfp->rs_threshold_kbd = 4250; + sfp->rs_state_mask = SFP_F_RS0; + break; + + case SFF_RID_8431_TX_ONLY: + sfp->rs_threshold_kbd = 4250; + sfp->rs_state_mask = SFP_F_RS1; + break; + + case SFF_RID_8431: + sfp->rs_threshold_kbd = 4250; + sfp->rs_state_mask = SFP_F_RS0 | SFP_F_RS1; + break; + + case SFF_RID_10G8G: + sfp->rs_threshold_kbd = 9000; + sfp->rs_state_mask = SFP_F_RS0 | SFP_F_RS1; + break; + } +} + +/* GPON modules based on Realtek RTL8672 and RTL9601C chips (e.g. V-SOL + * V2801F, CarlitoxxPro CPGOS03-0490, Ubiquiti U-Fiber Instant, ...) do + * not support multibyte reads from the EEPROM. Each multi-byte read + * operation returns just one byte of EEPROM followed by zeros. There is + * no way to identify which modules are using Realtek RTL8672 and RTL9601C + * chips. Moreover every OEM of V-SOL V2801F module puts its own vendor + * name and vendor id into EEPROM, so there is even no way to detect if + * module is V-SOL V2801F. Therefore check for those zeros in the read + * data and then based on check switch to reading EEPROM to one byte + * at a time. + */ +static bool sfp_id_needs_byte_io(struct sfp *sfp, void *buf, size_t len) +{ + size_t i, block_size = sfp->i2c_block_size; + + /* Already using byte IO */ + if (block_size == 1) + return false; + + for (i = 1; i < len; i += block_size) { + if (memchr_inv(buf + i, '\0', min(block_size - 1, len - i))) + return false; + } + return true; +} + +static int sfp_cotsworks_fixup_check(struct sfp *sfp, struct sfp_eeprom_id *id) +{ + u8 check; + int err; + + if (id->base.phys_id != SFF8024_ID_SFF_8472 || + id->base.phys_ext_id != SFP_PHYS_EXT_ID_SFP || + id->base.connector != SFF8024_CONNECTOR_LC) { + dev_warn(sfp->dev, "Rewriting fiber module EEPROM with corrected values\n"); + id->base.phys_id = SFF8024_ID_SFF_8472; + id->base.phys_ext_id = SFP_PHYS_EXT_ID_SFP; + id->base.connector = SFF8024_CONNECTOR_LC; + err = sfp_write(sfp, false, SFP_PHYS_ID, &id->base, 3); + if (err != 3) { + dev_err(sfp->dev, + "Failed to rewrite module EEPROM: %pe\n", + ERR_PTR(err)); + return err; + } + + /* Cotsworks modules have been found to require a delay between write operations. */ + mdelay(50); + + /* Update base structure checksum */ + check = sfp_check(&id->base, sizeof(id->base) - 1); + err = sfp_write(sfp, false, SFP_CC_BASE, &check, 1); + if (err != 1) { + dev_err(sfp->dev, + "Failed to update base structure checksum in fiber module EEPROM: %pe\n", + ERR_PTR(err)); + return err; + } + } + return 0; +} + +static int sfp_module_parse_sff8472(struct sfp *sfp) +{ + /* If the module requires address swap mode, warn about it */ + if (sfp->id.ext.diagmon & SFP_DIAGMON_ADDRMODE) + dev_warn(sfp->dev, + "module address swap to access page 0xA2 is not supported.\n"); + else + sfp->have_a2 = true; + + return 0; +} + +static int sfp_sm_mod_probe(struct sfp *sfp, bool report) +{ + /* SFP module inserted - read I2C data */ + struct sfp_eeprom_id id; + bool cotsworks_sfbg; + unsigned int mask; + bool cotsworks; + u8 check; + int ret; + + sfp->i2c_block_size = SFP_EEPROM_BLOCK_SIZE; + + ret = sfp_read(sfp, false, 0, &id.base, sizeof(id.base)); + if (ret < 0) { + if (report) + dev_err(sfp->dev, "failed to read EEPROM: %pe\n", + ERR_PTR(ret)); + return -EAGAIN; + } + + if (ret != sizeof(id.base)) { + dev_err(sfp->dev, "EEPROM short read: %pe\n", ERR_PTR(ret)); + return -EAGAIN; + } + + /* Some SFP modules (e.g. Nokia 3FE46541AA) lock up if read from + * address 0x51 is just one byte at a time. Also SFF-8472 requires + * that EEPROM supports atomic 16bit read operation for diagnostic + * fields, so do not switch to one byte reading at a time unless it + * is really required and we have no other option. + */ + if (sfp_id_needs_byte_io(sfp, &id.base, sizeof(id.base))) { + dev_info(sfp->dev, + "Detected broken RTL8672/RTL9601C emulated EEPROM\n"); + dev_info(sfp->dev, + "Switching to reading EEPROM to one byte at a time\n"); + sfp->i2c_block_size = 1; + + ret = sfp_read(sfp, false, 0, &id.base, sizeof(id.base)); + if (ret < 0) { + if (report) + dev_err(sfp->dev, + "failed to read EEPROM: %pe\n", + ERR_PTR(ret)); + return -EAGAIN; + } + + if (ret != sizeof(id.base)) { + dev_err(sfp->dev, "EEPROM short read: %pe\n", + ERR_PTR(ret)); + return -EAGAIN; + } + } + + /* Cotsworks do not seem to update the checksums when they + * do the final programming with the final module part number, + * serial number and date code. + */ + cotsworks = !memcmp(id.base.vendor_name, "COTSWORKS ", 16); + cotsworks_sfbg = !memcmp(id.base.vendor_pn, "SFBG", 4); + + /* Cotsworks SFF module EEPROM do not always have valid phys_id, + * phys_ext_id, and connector bytes. Rewrite SFF EEPROM bytes if + * Cotsworks PN matches and bytes are not correct. + */ + if (cotsworks && cotsworks_sfbg) { + ret = sfp_cotsworks_fixup_check(sfp, &id); + if (ret < 0) + return ret; + } + + /* Validate the checksum over the base structure */ + check = sfp_check(&id.base, sizeof(id.base) - 1); + if (check != id.base.cc_base) { + if (cotsworks) { + dev_warn(sfp->dev, + "EEPROM base structure checksum failure (0x%02x != 0x%02x)\n", + check, id.base.cc_base); + } else { + dev_err(sfp->dev, + "EEPROM base structure checksum failure: 0x%02x != 0x%02x\n", + check, id.base.cc_base); + print_hex_dump(KERN_ERR, "sfp EE: ", DUMP_PREFIX_OFFSET, + 16, 1, &id, sizeof(id), true); + return -EINVAL; + } + } + + ret = sfp_read(sfp, false, SFP_CC_BASE + 1, &id.ext, sizeof(id.ext)); + if (ret < 0) { + if (report) + dev_err(sfp->dev, "failed to read EEPROM: %pe\n", + ERR_PTR(ret)); + return -EAGAIN; + } + + if (ret != sizeof(id.ext)) { + dev_err(sfp->dev, "EEPROM short read: %pe\n", ERR_PTR(ret)); + return -EAGAIN; + } + + check = sfp_check(&id.ext, sizeof(id.ext) - 1); + if (check != id.ext.cc_ext) { + if (cotsworks) { + dev_warn(sfp->dev, + "EEPROM extended structure checksum failure (0x%02x != 0x%02x)\n", + check, id.ext.cc_ext); + } else { + dev_err(sfp->dev, + "EEPROM extended structure checksum failure: 0x%02x != 0x%02x\n", + check, id.ext.cc_ext); + print_hex_dump(KERN_ERR, "sfp EE: ", DUMP_PREFIX_OFFSET, + 16, 1, &id, sizeof(id), true); + memset(&id.ext, 0, sizeof(id.ext)); + } + } + + sfp->id = id; + + dev_info(sfp->dev, "module %.*s %.*s rev %.*s sn %.*s dc %.*s\n", + (int)sizeof(id.base.vendor_name), id.base.vendor_name, + (int)sizeof(id.base.vendor_pn), id.base.vendor_pn, + (int)sizeof(id.base.vendor_rev), id.base.vendor_rev, + (int)sizeof(id.ext.vendor_sn), id.ext.vendor_sn, + (int)sizeof(id.ext.datecode), id.ext.datecode); + + /* Check whether we support this module */ + if (!sfp->type->module_supported(&id)) { + dev_err(sfp->dev, + "module is not supported - phys id 0x%02x 0x%02x\n", + sfp->id.base.phys_id, sfp->id.base.phys_ext_id); + return -EINVAL; + } + + if (sfp->id.ext.sff8472_compliance != SFP_SFF8472_COMPLIANCE_NONE) { + ret = sfp_module_parse_sff8472(sfp); + if (ret < 0) + return ret; + } + + /* Parse the module power requirement */ + ret = sfp_module_parse_power(sfp); + if (ret < 0) + return ret; + + sfp_module_parse_rate_select(sfp); + + mask = SFP_F_PRESENT; + if (sfp->gpio[GPIO_TX_DISABLE]) + mask |= SFP_F_TX_DISABLE; + if (sfp->gpio[GPIO_TX_FAULT]) + mask |= SFP_F_TX_FAULT; + if (sfp->gpio[GPIO_LOS]) + mask |= SFP_F_LOS; + if (sfp->gpio[GPIO_RS0]) + mask |= SFP_F_RS0; + if (sfp->gpio[GPIO_RS1]) + mask |= SFP_F_RS1; + + sfp->module_t_start_up = T_START_UP; + sfp->module_t_wait = T_WAIT; + + sfp->tx_fault_ignore = false; + + if (sfp->id.base.extended_cc == SFF8024_ECC_10GBASE_T_SFI || + sfp->id.base.extended_cc == SFF8024_ECC_10GBASE_T_SR || + sfp->id.base.extended_cc == SFF8024_ECC_5GBASE_T || + sfp->id.base.extended_cc == SFF8024_ECC_2_5GBASE_T) + sfp->mdio_protocol = MDIO_I2C_C45; + else if (sfp->id.base.e1000_base_t) + sfp->mdio_protocol = MDIO_I2C_MARVELL_C22; + else + sfp->mdio_protocol = MDIO_I2C_NONE; + + sfp->quirk = sfp_lookup_quirk(&id); + + mutex_lock(&sfp->st_mutex); + /* Initialise state bits to use from hardware */ + sfp->state_hw_mask = mask; + + /* We want to drive the rate select pins that the module is using */ + sfp->state_hw_drive |= sfp->rs_state_mask; + + if (sfp->quirk && sfp->quirk->fixup) + sfp->quirk->fixup(sfp); + mutex_unlock(&sfp->st_mutex); + + return 0; +} + +static void sfp_sm_mod_remove(struct sfp *sfp) +{ + if (sfp->sm_mod_state > SFP_MOD_WAITDEV) + sfp_module_remove(sfp->sfp_bus); + + sfp_hwmon_remove(sfp); + + memset(&sfp->id, 0, sizeof(sfp->id)); + sfp->module_power_mW = 0; + sfp->state_hw_drive = SFP_F_TX_DISABLE; + sfp->have_a2 = false; + + dev_info(sfp->dev, "module removed\n"); +} + +/* This state machine tracks the upstream's state */ +static void sfp_sm_device(struct sfp *sfp, unsigned int event) +{ + switch (sfp->sm_dev_state) { + default: + if (event == SFP_E_DEV_ATTACH) + sfp->sm_dev_state = SFP_DEV_DOWN; + break; + + case SFP_DEV_DOWN: + if (event == SFP_E_DEV_DETACH) + sfp->sm_dev_state = SFP_DEV_DETACHED; + else if (event == SFP_E_DEV_UP) + sfp->sm_dev_state = SFP_DEV_UP; + break; + + case SFP_DEV_UP: + if (event == SFP_E_DEV_DETACH) + sfp->sm_dev_state = SFP_DEV_DETACHED; + else if (event == SFP_E_DEV_DOWN) + sfp->sm_dev_state = SFP_DEV_DOWN; + break; + } +} + +/* This state machine tracks the insert/remove state of the module, probes + * the on-board EEPROM, and sets up the power level. + */ +static void sfp_sm_module(struct sfp *sfp, unsigned int event) +{ + int err; + + /* Handle remove event globally, it resets this state machine */ + if (event == SFP_E_REMOVE) { + if (sfp->sm_mod_state > SFP_MOD_PROBE) + sfp_sm_mod_remove(sfp); + sfp_sm_mod_next(sfp, SFP_MOD_EMPTY, 0); + return; + } + + /* Handle device detach globally */ + if (sfp->sm_dev_state < SFP_DEV_DOWN && + sfp->sm_mod_state > SFP_MOD_WAITDEV) { + if (sfp->module_power_mW > 1000 && + sfp->sm_mod_state > SFP_MOD_HPOWER) + sfp_sm_mod_hpower(sfp, false); + sfp_sm_mod_next(sfp, SFP_MOD_WAITDEV, 0); + return; + } + + switch (sfp->sm_mod_state) { + default: + if (event == SFP_E_INSERT) { + sfp_sm_mod_next(sfp, SFP_MOD_PROBE, T_SERIAL); + sfp->sm_mod_tries_init = R_PROBE_RETRY_INIT; + sfp->sm_mod_tries = R_PROBE_RETRY_SLOW; + } + break; + + case SFP_MOD_PROBE: + /* Wait for T_PROBE_INIT to time out */ + if (event != SFP_E_TIMEOUT) + break; + + err = sfp_sm_mod_probe(sfp, sfp->sm_mod_tries == 1); + if (err == -EAGAIN) { + if (sfp->sm_mod_tries_init && + --sfp->sm_mod_tries_init) { + sfp_sm_set_timer(sfp, T_PROBE_RETRY_INIT); + break; + } else if (sfp->sm_mod_tries && --sfp->sm_mod_tries) { + if (sfp->sm_mod_tries == R_PROBE_RETRY_SLOW - 1) + dev_warn(sfp->dev, + "please wait, module slow to respond\n"); + sfp_sm_set_timer(sfp, T_PROBE_RETRY_SLOW); + break; + } + } + if (err < 0) { + sfp_sm_mod_next(sfp, SFP_MOD_ERROR, 0); + break; + } + + /* Force a poll to re-read the hardware signal state after + * sfp_sm_mod_probe() changed state_hw_mask. + */ + mod_delayed_work(system_wq, &sfp->poll, 1); + + err = sfp_hwmon_insert(sfp); + if (err) + dev_warn(sfp->dev, "hwmon probe failed: %pe\n", + ERR_PTR(err)); + + sfp_sm_mod_next(sfp, SFP_MOD_WAITDEV, 0); + fallthrough; + case SFP_MOD_WAITDEV: + /* Ensure that the device is attached before proceeding */ + if (sfp->sm_dev_state < SFP_DEV_DOWN) + break; + + /* Report the module insertion to the upstream device */ + err = sfp_module_insert(sfp->sfp_bus, &sfp->id, + sfp->quirk); + if (err < 0) { + sfp_sm_mod_next(sfp, SFP_MOD_ERROR, 0); + break; + } + + /* If this is a power level 1 module, we are done */ + if (sfp->module_power_mW <= 1000) + goto insert; + + sfp_sm_mod_next(sfp, SFP_MOD_HPOWER, 0); + fallthrough; + case SFP_MOD_HPOWER: + /* Enable high power mode */ + err = sfp_sm_mod_hpower(sfp, true); + if (err < 0) { + if (err != -EAGAIN) { + sfp_module_remove(sfp->sfp_bus); + sfp_sm_mod_next(sfp, SFP_MOD_ERROR, 0); + } else { + sfp_sm_set_timer(sfp, T_PROBE_RETRY_INIT); + } + break; + } + + sfp_sm_mod_next(sfp, SFP_MOD_WAITPWR, T_HPOWER_LEVEL); + break; + + case SFP_MOD_WAITPWR: + /* Wait for T_HPOWER_LEVEL to time out */ + if (event != SFP_E_TIMEOUT) + break; + + insert: + sfp_sm_mod_next(sfp, SFP_MOD_PRESENT, 0); + break; + + case SFP_MOD_PRESENT: + case SFP_MOD_ERROR: + break; + } +} + +static void sfp_sm_main(struct sfp *sfp, unsigned int event) +{ + unsigned long timeout; + int ret; + + /* Some events are global */ + if (sfp->sm_state != SFP_S_DOWN && + (sfp->sm_mod_state != SFP_MOD_PRESENT || + sfp->sm_dev_state != SFP_DEV_UP)) { + if (sfp->sm_state == SFP_S_LINK_UP && + sfp->sm_dev_state == SFP_DEV_UP) + sfp_sm_link_down(sfp); + if (sfp->sm_state > SFP_S_INIT) + sfp_module_stop(sfp->sfp_bus); + if (sfp->mod_phy) + sfp_sm_phy_detach(sfp); + if (sfp->i2c_mii) + sfp_i2c_mdiobus_destroy(sfp); + sfp_module_tx_disable(sfp); + sfp_soft_stop_poll(sfp); + sfp_sm_next(sfp, SFP_S_DOWN, 0); + return; + } + + /* The main state machine */ + switch (sfp->sm_state) { + case SFP_S_DOWN: + if (sfp->sm_mod_state != SFP_MOD_PRESENT || + sfp->sm_dev_state != SFP_DEV_UP) + break; + + /* Only use the soft state bits if we have access to the A2h + * memory, which implies that we have some level of SFF-8472 + * compliance. + */ + if (sfp->have_a2) + sfp_soft_start_poll(sfp); + + sfp_module_tx_enable(sfp); + + /* Initialise the fault clearance retries */ + sfp->sm_fault_retries = N_FAULT_INIT; + + /* We need to check the TX_FAULT state, which is not defined + * while TX_DISABLE is asserted. The earliest we want to do + * anything (such as probe for a PHY) is 50ms (or more on + * specific modules). + */ + sfp_sm_next(sfp, SFP_S_WAIT, sfp->module_t_wait); + break; + + case SFP_S_WAIT: + if (event != SFP_E_TIMEOUT) + break; + + if (sfp->state & SFP_F_TX_FAULT) { + /* Wait up to t_init (SFF-8472) or t_start_up (SFF-8431) + * from the TX_DISABLE deassertion for the module to + * initialise, which is indicated by TX_FAULT + * deasserting. + */ + timeout = sfp->module_t_start_up; + if (timeout > sfp->module_t_wait) + timeout -= sfp->module_t_wait; + else + timeout = 1; + + sfp_sm_next(sfp, SFP_S_INIT, timeout); + } else { + /* TX_FAULT is not asserted, assume the module has + * finished initialising. + */ + goto init_done; + } + break; + + case SFP_S_INIT: + if (event == SFP_E_TIMEOUT && sfp->state & SFP_F_TX_FAULT) { + /* TX_FAULT is still asserted after t_init + * or t_start_up, so assume there is a fault. + */ + sfp_sm_fault(sfp, SFP_S_INIT_TX_FAULT, + sfp->sm_fault_retries == N_FAULT_INIT); + } else if (event == SFP_E_TIMEOUT || event == SFP_E_TX_CLEAR) { + init_done: + /* Create mdiobus and start trying for PHY */ + ret = sfp_sm_add_mdio_bus(sfp); + if (ret < 0) { + sfp_sm_next(sfp, SFP_S_FAIL, 0); + break; + } + sfp->sm_phy_retries = R_PHY_RETRY; + goto phy_probe; + } + break; + + case SFP_S_INIT_PHY: + if (event != SFP_E_TIMEOUT) + break; + phy_probe: + /* TX_FAULT deasserted or we timed out with TX_FAULT + * clear. Probe for the PHY and check the LOS state. + */ + ret = sfp_sm_probe_for_phy(sfp); + if (ret == -ENODEV) { + if (--sfp->sm_phy_retries) { + sfp_sm_next(sfp, SFP_S_INIT_PHY, T_PHY_RETRY); + break; + } else { + dev_info(sfp->dev, "no PHY detected\n"); + } + } else if (ret) { + sfp_sm_next(sfp, SFP_S_FAIL, 0); + break; + } + if (sfp_module_start(sfp->sfp_bus)) { + sfp_sm_next(sfp, SFP_S_FAIL, 0); + break; + } + sfp_sm_link_check_los(sfp); + + /* Reset the fault retry count */ + sfp->sm_fault_retries = N_FAULT; + break; + + case SFP_S_INIT_TX_FAULT: + if (event == SFP_E_TIMEOUT) { + sfp_module_tx_fault_reset(sfp); + sfp_sm_next(sfp, SFP_S_INIT, sfp->module_t_start_up); + } + break; + + case SFP_S_WAIT_LOS: + if (event == SFP_E_TX_FAULT) + sfp_sm_fault(sfp, SFP_S_TX_FAULT, true); + else if (sfp_los_event_inactive(sfp, event)) + sfp_sm_link_up(sfp); + break; + + case SFP_S_LINK_UP: + if (event == SFP_E_TX_FAULT) { + sfp_sm_link_down(sfp); + sfp_sm_fault(sfp, SFP_S_TX_FAULT, true); + } else if (sfp_los_event_active(sfp, event)) { + sfp_sm_link_down(sfp); + sfp_sm_next(sfp, SFP_S_WAIT_LOS, 0); + } + break; + + case SFP_S_TX_FAULT: + if (event == SFP_E_TIMEOUT) { + sfp_module_tx_fault_reset(sfp); + sfp_sm_next(sfp, SFP_S_REINIT, sfp->module_t_start_up); + } + break; + + case SFP_S_REINIT: + if (event == SFP_E_TIMEOUT && sfp->state & SFP_F_TX_FAULT) { + sfp_sm_fault(sfp, SFP_S_TX_FAULT, false); + } else if (event == SFP_E_TIMEOUT || event == SFP_E_TX_CLEAR) { + dev_info(sfp->dev, "module transmit fault recovered\n"); + sfp_sm_link_check_los(sfp); + } + break; + + case SFP_S_TX_DISABLE: + break; + } +} + +static void __sfp_sm_event(struct sfp *sfp, unsigned int event) +{ + dev_dbg(sfp->dev, "SM: enter %s:%s:%s event %s\n", + mod_state_to_str(sfp->sm_mod_state), + dev_state_to_str(sfp->sm_dev_state), + sm_state_to_str(sfp->sm_state), + event_to_str(event)); + + sfp_sm_device(sfp, event); + sfp_sm_module(sfp, event); + sfp_sm_main(sfp, event); + + dev_dbg(sfp->dev, "SM: exit %s:%s:%s\n", + mod_state_to_str(sfp->sm_mod_state), + dev_state_to_str(sfp->sm_dev_state), + sm_state_to_str(sfp->sm_state)); +} + +static void sfp_sm_event(struct sfp *sfp, unsigned int event) +{ + mutex_lock(&sfp->sm_mutex); + __sfp_sm_event(sfp, event); + mutex_unlock(&sfp->sm_mutex); +} + +static void sfp_attach(struct sfp *sfp) +{ + sfp_sm_event(sfp, SFP_E_DEV_ATTACH); +} + +static void sfp_detach(struct sfp *sfp) +{ + sfp_sm_event(sfp, SFP_E_DEV_DETACH); +} + +static void sfp_start(struct sfp *sfp) +{ + sfp_sm_event(sfp, SFP_E_DEV_UP); +} + +static void sfp_stop(struct sfp *sfp) +{ + sfp_sm_event(sfp, SFP_E_DEV_DOWN); +} + +static void sfp_set_signal_rate(struct sfp *sfp, unsigned int rate_kbd) +{ + unsigned int set; + + sfp->rate_kbd = rate_kbd; + + if (rate_kbd > sfp->rs_threshold_kbd) + set = sfp->rs_state_mask; + else + set = 0; + + sfp_mod_state(sfp, SFP_F_RS0 | SFP_F_RS1, set); +} + +static int sfp_module_info(struct sfp *sfp, struct ethtool_modinfo *modinfo) +{ + /* locking... and check module is present */ + + if (sfp->id.ext.sff8472_compliance && + !(sfp->id.ext.diagmon & SFP_DIAGMON_ADDRMODE)) { + modinfo->type = ETH_MODULE_SFF_8472; + modinfo->eeprom_len = ETH_MODULE_SFF_8472_LEN; + } else { + modinfo->type = ETH_MODULE_SFF_8079; + modinfo->eeprom_len = ETH_MODULE_SFF_8079_LEN; + } + return 0; +} + +static int sfp_module_eeprom(struct sfp *sfp, struct ethtool_eeprom *ee, + u8 *data) +{ + unsigned int first, last, len; + int ret; + + if (!(sfp->state & SFP_F_PRESENT)) + return -ENODEV; + + if (ee->len == 0) + return -EINVAL; + + first = ee->offset; + last = ee->offset + ee->len; + if (first < ETH_MODULE_SFF_8079_LEN) { + len = min_t(unsigned int, last, ETH_MODULE_SFF_8079_LEN); + len -= first; + + ret = sfp_read(sfp, false, first, data, len); + if (ret < 0) + return ret; + + first += len; + data += len; + } + if (first < ETH_MODULE_SFF_8472_LEN && last > ETH_MODULE_SFF_8079_LEN) { + len = min_t(unsigned int, last, ETH_MODULE_SFF_8472_LEN); + len -= first; + first -= ETH_MODULE_SFF_8079_LEN; + + ret = sfp_read(sfp, true, first, data, len); + if (ret < 0) + return ret; + } + return 0; +} + +static int sfp_module_eeprom_by_page(struct sfp *sfp, + const struct ethtool_module_eeprom *page, + struct netlink_ext_ack *extack) +{ + if (!(sfp->state & SFP_F_PRESENT)) + return -ENODEV; + + if (page->bank) { + NL_SET_ERR_MSG(extack, "Banks not supported"); + return -EOPNOTSUPP; + } + + if (page->page) { + NL_SET_ERR_MSG(extack, "Only page 0 supported"); + return -EOPNOTSUPP; + } + + if (page->i2c_address != 0x50 && + page->i2c_address != 0x51) { + NL_SET_ERR_MSG(extack, "Only address 0x50 and 0x51 supported"); + return -EOPNOTSUPP; + } + + return sfp_read(sfp, page->i2c_address == 0x51, page->offset, + page->data, page->length); +}; + +static const struct sfp_socket_ops sfp_module_ops = { + .attach = sfp_attach, + .detach = sfp_detach, + .start = sfp_start, + .stop = sfp_stop, + .set_signal_rate = sfp_set_signal_rate, + .module_info = sfp_module_info, + .module_eeprom = sfp_module_eeprom, + .module_eeprom_by_page = sfp_module_eeprom_by_page, +}; + +static void sfp_timeout(struct work_struct *work) +{ + struct sfp *sfp = container_of(work, struct sfp, timeout.work); + + rtnl_lock(); + sfp_sm_event(sfp, SFP_E_TIMEOUT); + rtnl_unlock(); +} + +static void sfp_check_state(struct sfp *sfp) +{ + unsigned int state, i, changed; + + rtnl_lock(); + mutex_lock(&sfp->st_mutex); + state = sfp_get_state(sfp); + changed = state ^ sfp->state; + if (sfp->tx_fault_ignore) + changed &= SFP_F_PRESENT | SFP_F_LOS; + else + changed &= SFP_F_PRESENT | SFP_F_LOS | SFP_F_TX_FAULT; + + for (i = 0; i < GPIO_MAX; i++) + if (changed & BIT(i)) + dev_dbg(sfp->dev, "%s %u -> %u\n", gpio_names[i], + !!(sfp->state & BIT(i)), !!(state & BIT(i))); + + state |= sfp->state & SFP_F_OUTPUTS; + sfp->state = state; + mutex_unlock(&sfp->st_mutex); + + mutex_lock(&sfp->sm_mutex); + if (changed & SFP_F_PRESENT) + __sfp_sm_event(sfp, state & SFP_F_PRESENT ? + SFP_E_INSERT : SFP_E_REMOVE); + + if (changed & SFP_F_TX_FAULT) + __sfp_sm_event(sfp, state & SFP_F_TX_FAULT ? + SFP_E_TX_FAULT : SFP_E_TX_CLEAR); + + if (changed & SFP_F_LOS) + __sfp_sm_event(sfp, state & SFP_F_LOS ? + SFP_E_LOS_HIGH : SFP_E_LOS_LOW); + mutex_unlock(&sfp->sm_mutex); + rtnl_unlock(); +} + +static irqreturn_t sfp_irq(int irq, void *data) +{ + struct sfp *sfp = data; + + sfp_check_state(sfp); + + return IRQ_HANDLED; +} + +static void sfp_poll(struct work_struct *work) +{ + struct sfp *sfp = container_of(work, struct sfp, poll.work); + + sfp_check_state(sfp); + + // st_mutex doesn't need to be held here for state_soft_mask, + // it's unimportant if we race while reading this. + if (sfp->state_soft_mask & (SFP_F_LOS | SFP_F_TX_FAULT) || + sfp->need_poll) + mod_delayed_work(system_wq, &sfp->poll, poll_jiffies); +} + +static struct sfp *sfp_alloc(struct device *dev) +{ + struct sfp *sfp; + + sfp = kzalloc(sizeof(*sfp), GFP_KERNEL); + if (!sfp) + return ERR_PTR(-ENOMEM); + + sfp->dev = dev; + sfp->i2c_block_size = SFP_EEPROM_BLOCK_SIZE; + + mutex_init(&sfp->sm_mutex); + mutex_init(&sfp->st_mutex); + INIT_DELAYED_WORK(&sfp->poll, sfp_poll); + INIT_DELAYED_WORK(&sfp->timeout, sfp_timeout); + + sfp_hwmon_init(sfp); + + return sfp; +} + +static void sfp_cleanup(void *data) +{ + struct sfp *sfp = data; + + sfp_hwmon_exit(sfp); + + cancel_delayed_work_sync(&sfp->poll); + cancel_delayed_work_sync(&sfp->timeout); + if (sfp->i2c_mii) { + mdiobus_unregister(sfp->i2c_mii); + mdiobus_free(sfp->i2c_mii); + } + if (sfp->i2c) + i2c_put_adapter(sfp->i2c); + kfree(sfp); +} + +static int sfp_i2c_get(struct sfp *sfp) +{ + struct fwnode_handle *h; + struct i2c_adapter *i2c; + int err; + + h = fwnode_find_reference(dev_fwnode(sfp->dev), "i2c-bus", 0); + if (IS_ERR(h)) { + dev_err(sfp->dev, "missing 'i2c-bus' property\n"); + return -ENODEV; + } + + i2c = i2c_get_adapter_by_fwnode(h); + if (!i2c) { + err = -EPROBE_DEFER; + goto put; + } + + err = sfp_i2c_configure(sfp, i2c); + if (err) + i2c_put_adapter(i2c); +put: + fwnode_handle_put(h); + return err; +} + +static int sfp_probe(struct platform_device *pdev) +{ + const struct sff_data *sff; + char *sfp_irq_name; + struct sfp *sfp; + int err, i; + + sfp = sfp_alloc(&pdev->dev); + if (IS_ERR(sfp)) + return PTR_ERR(sfp); + + platform_set_drvdata(pdev, sfp); + + err = devm_add_action_or_reset(sfp->dev, sfp_cleanup, sfp); + if (err < 0) + return err; + + sff = device_get_match_data(sfp->dev); + if (!sff) + sff = &sfp_data; + + sfp->type = sff; + + err = sfp_i2c_get(sfp); + if (err) + return err; + + for (i = 0; i < GPIO_MAX; i++) + if (sff->gpios & BIT(i)) { + sfp->gpio[i] = devm_gpiod_get_optional(sfp->dev, + gpio_names[i], gpio_flags[i]); + if (IS_ERR(sfp->gpio[i])) + return PTR_ERR(sfp->gpio[i]); + } + + sfp->state_hw_mask = SFP_F_PRESENT; + sfp->state_hw_drive = SFP_F_TX_DISABLE; + + sfp->get_state = sfp_gpio_get_state; + sfp->set_state = sfp_gpio_set_state; + + /* Modules that have no detect signal are always present */ + if (!(sfp->gpio[GPIO_MODDEF0])) + sfp->get_state = sff_gpio_get_state; + + device_property_read_u32(&pdev->dev, "maximum-power-milliwatt", + &sfp->max_power_mW); + if (sfp->max_power_mW < 1000) { + if (sfp->max_power_mW) + dev_warn(sfp->dev, + "Firmware bug: host maximum power should be at least 1W\n"); + sfp->max_power_mW = 1000; + } + + dev_info(sfp->dev, "Host maximum power %u.%uW\n", + sfp->max_power_mW / 1000, (sfp->max_power_mW / 100) % 10); + + /* Get the initial state, and always signal TX disable, + * since the network interface will not be up. + */ + sfp->state = sfp_get_state(sfp) | SFP_F_TX_DISABLE; + + if (sfp->gpio[GPIO_RS0] && + gpiod_get_value_cansleep(sfp->gpio[GPIO_RS0])) + sfp->state |= SFP_F_RS0; + sfp_set_state(sfp, sfp->state); + sfp_module_tx_disable(sfp); + if (sfp->state & SFP_F_PRESENT) { + rtnl_lock(); + sfp_sm_event(sfp, SFP_E_INSERT); + rtnl_unlock(); + } + + for (i = 0; i < GPIO_MAX; i++) { + if (gpio_flags[i] != GPIOD_IN || !sfp->gpio[i]) + continue; + + sfp->gpio_irq[i] = gpiod_to_irq(sfp->gpio[i]); + if (sfp->gpio_irq[i] < 0) { + sfp->gpio_irq[i] = 0; + sfp->need_poll = true; + continue; + } + + sfp_irq_name = devm_kasprintf(sfp->dev, GFP_KERNEL, + "%s-%s", dev_name(sfp->dev), + gpio_names[i]); + + if (!sfp_irq_name) + return -ENOMEM; + + err = devm_request_threaded_irq(sfp->dev, sfp->gpio_irq[i], + NULL, sfp_irq, + IRQF_ONESHOT | + IRQF_TRIGGER_RISING | + IRQF_TRIGGER_FALLING, + sfp_irq_name, sfp); + if (err) { + sfp->gpio_irq[i] = 0; + sfp->need_poll = true; + } + } + + if (sfp->need_poll) + mod_delayed_work(system_wq, &sfp->poll, poll_jiffies); + + /* We could have an issue in cases no Tx disable pin is available or + * wired as modules using a laser as their light source will continue to + * be active when the fiber is removed. This could be a safety issue and + * we should at least warn the user about that. + */ + if (!sfp->gpio[GPIO_TX_DISABLE]) + dev_warn(sfp->dev, + "No tx_disable pin: SFP modules will always be emitting.\n"); + + sfp->sfp_bus = sfp_register_socket(sfp->dev, sfp, &sfp_module_ops); + if (!sfp->sfp_bus) + return -ENOMEM; + + sfp_debugfs_init(sfp); + + return 0; +} + +static int sfp_remove(struct platform_device *pdev) +{ + struct sfp *sfp = platform_get_drvdata(pdev); + + sfp_debugfs_exit(sfp); + sfp_unregister_socket(sfp->sfp_bus); + + rtnl_lock(); + sfp_sm_event(sfp, SFP_E_REMOVE); + rtnl_unlock(); + + return 0; +} + +static void sfp_shutdown(struct platform_device *pdev) +{ + struct sfp *sfp = platform_get_drvdata(pdev); + int i; + + for (i = 0; i < GPIO_MAX; i++) { + if (!sfp->gpio_irq[i]) + continue; + + devm_free_irq(sfp->dev, sfp->gpio_irq[i], sfp); + } + + cancel_delayed_work_sync(&sfp->poll); + cancel_delayed_work_sync(&sfp->timeout); +} + +static struct platform_driver sfp_driver = { + .probe = sfp_probe, + .remove = sfp_remove, + .shutdown = sfp_shutdown, + .driver = { + .name = "sfp", + .of_match_table = sfp_of_match, + }, +}; + +static int sfp_init(void) +{ + poll_jiffies = msecs_to_jiffies(100); + + return platform_driver_register(&sfp_driver); +} +module_init(sfp_init); + +static void sfp_exit(void) +{ + platform_driver_unregister(&sfp_driver); +} +module_exit(sfp_exit); + +MODULE_ALIAS("platform:sfp"); +MODULE_AUTHOR("Russell King"); +MODULE_LICENSE("GPL v2"); |