diff options
Diffstat (limited to 'drivers/net/phy/vitesse.c')
| -rw-r--r-- | drivers/net/phy/vitesse.c | 522 |
1 files changed, 522 insertions, 0 deletions
diff --git a/drivers/net/phy/vitesse.c b/drivers/net/phy/vitesse.c new file mode 100644 index 0000000000..897b979ec0 --- /dev/null +++ b/drivers/net/phy/vitesse.c @@ -0,0 +1,522 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Driver for Vitesse PHYs + * + * Author: Kriston Carson + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/mii.h> +#include <linux/ethtool.h> +#include <linux/phy.h> + +/* Vitesse Extended Page Magic Register(s) */ +#define MII_VSC82X4_EXT_PAGE_16E 0x10 +#define MII_VSC82X4_EXT_PAGE_17E 0x11 +#define MII_VSC82X4_EXT_PAGE_18E 0x12 + +/* Vitesse Extended Control Register 1 */ +#define MII_VSC8244_EXT_CON1 0x17 +#define MII_VSC8244_EXTCON1_INIT 0x0000 +#define MII_VSC8244_EXTCON1_TX_SKEW_MASK 0x0c00 +#define MII_VSC8244_EXTCON1_RX_SKEW_MASK 0x0300 +#define MII_VSC8244_EXTCON1_TX_SKEW 0x0800 +#define MII_VSC8244_EXTCON1_RX_SKEW 0x0200 + +/* Vitesse Interrupt Mask Register */ +#define MII_VSC8244_IMASK 0x19 +#define MII_VSC8244_IMASK_IEN 0x8000 +#define MII_VSC8244_IMASK_SPEED 0x4000 +#define MII_VSC8244_IMASK_LINK 0x2000 +#define MII_VSC8244_IMASK_DUPLEX 0x1000 +#define MII_VSC8244_IMASK_MASK 0xf000 + +#define MII_VSC8221_IMASK_MASK 0xa000 + +/* Vitesse Interrupt Status Register */ +#define MII_VSC8244_ISTAT 0x1a +#define MII_VSC8244_ISTAT_STATUS 0x8000 +#define MII_VSC8244_ISTAT_SPEED 0x4000 +#define MII_VSC8244_ISTAT_LINK 0x2000 +#define MII_VSC8244_ISTAT_DUPLEX 0x1000 +#define MII_VSC8244_ISTAT_MASK (MII_VSC8244_ISTAT_SPEED | \ + MII_VSC8244_ISTAT_LINK | \ + MII_VSC8244_ISTAT_DUPLEX) + +#define MII_VSC8221_ISTAT_MASK MII_VSC8244_ISTAT_LINK + +/* Vitesse Auxiliary Control/Status Register */ +#define MII_VSC8244_AUX_CONSTAT 0x1c +#define MII_VSC8244_AUXCONSTAT_INIT 0x0000 +#define MII_VSC8244_AUXCONSTAT_DUPLEX 0x0020 +#define MII_VSC8244_AUXCONSTAT_SPEED 0x0018 +#define MII_VSC8244_AUXCONSTAT_GBIT 0x0010 +#define MII_VSC8244_AUXCONSTAT_100 0x0008 + +#define MII_VSC8221_AUXCONSTAT_INIT 0x0004 /* need to set this bit? */ +#define MII_VSC8221_AUXCONSTAT_RESERVED 0x0004 + +/* Vitesse Extended Page Access Register */ +#define MII_VSC82X4_EXT_PAGE_ACCESS 0x1f + +/* Vitesse VSC8601 Extended PHY Control Register 1 */ +#define MII_VSC8601_EPHY_CTL 0x17 +#define MII_VSC8601_EPHY_CTL_RGMII_SKEW (1 << 8) + +#define PHY_ID_VSC8234 0x000fc620 +#define PHY_ID_VSC8244 0x000fc6c0 +#define PHY_ID_VSC8572 0x000704d0 +#define PHY_ID_VSC8601 0x00070420 +#define PHY_ID_VSC7385 0x00070450 +#define PHY_ID_VSC7388 0x00070480 +#define PHY_ID_VSC7395 0x00070550 +#define PHY_ID_VSC7398 0x00070580 +#define PHY_ID_VSC8662 0x00070660 +#define PHY_ID_VSC8221 0x000fc550 +#define PHY_ID_VSC8211 0x000fc4b0 + +MODULE_DESCRIPTION("Vitesse PHY driver"); +MODULE_AUTHOR("Kriston Carson"); +MODULE_LICENSE("GPL"); + +static int vsc824x_add_skew(struct phy_device *phydev) +{ + int err; + int extcon; + + extcon = phy_read(phydev, MII_VSC8244_EXT_CON1); + + if (extcon < 0) + return extcon; + + extcon &= ~(MII_VSC8244_EXTCON1_TX_SKEW_MASK | + MII_VSC8244_EXTCON1_RX_SKEW_MASK); + + extcon |= (MII_VSC8244_EXTCON1_TX_SKEW | + MII_VSC8244_EXTCON1_RX_SKEW); + + err = phy_write(phydev, MII_VSC8244_EXT_CON1, extcon); + + return err; +} + +static int vsc824x_config_init(struct phy_device *phydev) +{ + int err; + + err = phy_write(phydev, MII_VSC8244_AUX_CONSTAT, + MII_VSC8244_AUXCONSTAT_INIT); + if (err < 0) + return err; + + if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) + err = vsc824x_add_skew(phydev); + + return err; +} + +#define VSC73XX_EXT_PAGE_ACCESS 0x1f + +static int vsc73xx_read_page(struct phy_device *phydev) +{ + return __phy_read(phydev, VSC73XX_EXT_PAGE_ACCESS); +} + +static int vsc73xx_write_page(struct phy_device *phydev, int page) +{ + return __phy_write(phydev, VSC73XX_EXT_PAGE_ACCESS, page); +} + +static void vsc73xx_config_init(struct phy_device *phydev) +{ + /* Receiver init */ + phy_write(phydev, 0x1f, 0x2a30); + phy_modify(phydev, 0x0c, 0x0300, 0x0200); + phy_write(phydev, 0x1f, 0x0000); + + /* Config LEDs 0x61 */ + phy_modify(phydev, MII_TPISTATUS, 0xff00, 0x0061); +} + +static int vsc738x_config_init(struct phy_device *phydev) +{ + u16 rev; + /* This magic sequence appear in the application note + * "VSC7385/7388 PHY Configuration". + * + * Maybe one day we will get to know what it all means. + */ + phy_write(phydev, 0x1f, 0x2a30); + phy_modify(phydev, 0x08, 0x0200, 0x0200); + phy_write(phydev, 0x1f, 0x52b5); + phy_write(phydev, 0x10, 0xb68a); + phy_modify(phydev, 0x12, 0xff07, 0x0003); + phy_modify(phydev, 0x11, 0x00ff, 0x00a2); + phy_write(phydev, 0x10, 0x968a); + phy_write(phydev, 0x1f, 0x2a30); + phy_modify(phydev, 0x08, 0x0200, 0x0000); + phy_write(phydev, 0x1f, 0x0000); + + /* Read revision */ + rev = phy_read(phydev, MII_PHYSID2); + rev &= 0x0f; + + /* Special quirk for revision 0 */ + if (rev == 0) { + phy_write(phydev, 0x1f, 0x2a30); + phy_modify(phydev, 0x08, 0x0200, 0x0200); + phy_write(phydev, 0x1f, 0x52b5); + phy_write(phydev, 0x12, 0x0000); + phy_write(phydev, 0x11, 0x0689); + phy_write(phydev, 0x10, 0x8f92); + phy_write(phydev, 0x1f, 0x52b5); + phy_write(phydev, 0x12, 0x0000); + phy_write(phydev, 0x11, 0x0e35); + phy_write(phydev, 0x10, 0x9786); + phy_write(phydev, 0x1f, 0x2a30); + phy_modify(phydev, 0x08, 0x0200, 0x0000); + phy_write(phydev, 0x17, 0xff80); + phy_write(phydev, 0x17, 0x0000); + } + + phy_write(phydev, 0x1f, 0x0000); + phy_write(phydev, 0x12, 0x0048); + + if (rev == 0) { + phy_write(phydev, 0x1f, 0x2a30); + phy_write(phydev, 0x14, 0x6600); + phy_write(phydev, 0x1f, 0x0000); + phy_write(phydev, 0x18, 0xa24e); + } else { + phy_write(phydev, 0x1f, 0x2a30); + phy_modify(phydev, 0x16, 0x0fc0, 0x0240); + phy_modify(phydev, 0x14, 0x6000, 0x4000); + /* bits 14-15 in extended register 0x14 controls DACG amplitude + * 6 = -8%, 2 is hardware default + */ + phy_write(phydev, 0x1f, 0x0001); + phy_modify(phydev, 0x14, 0xe000, 0x6000); + phy_write(phydev, 0x1f, 0x0000); + } + + vsc73xx_config_init(phydev); + + return 0; +} + +static int vsc739x_config_init(struct phy_device *phydev) +{ + /* This magic sequence appears in the VSC7395 SparX-G5e application + * note "VSC7395/VSC7398 PHY Configuration" + * + * Maybe one day we will get to know what it all means. + */ + phy_write(phydev, 0x1f, 0x2a30); + phy_modify(phydev, 0x08, 0x0200, 0x0200); + phy_write(phydev, 0x1f, 0x52b5); + phy_write(phydev, 0x10, 0xb68a); + phy_modify(phydev, 0x12, 0xff07, 0x0003); + phy_modify(phydev, 0x11, 0x00ff, 0x00a2); + phy_write(phydev, 0x10, 0x968a); + phy_write(phydev, 0x1f, 0x2a30); + phy_modify(phydev, 0x08, 0x0200, 0x0000); + phy_write(phydev, 0x1f, 0x0000); + + phy_write(phydev, 0x1f, 0x0000); + phy_write(phydev, 0x12, 0x0048); + phy_write(phydev, 0x1f, 0x2a30); + phy_modify(phydev, 0x16, 0x0fc0, 0x0240); + phy_modify(phydev, 0x14, 0x6000, 0x4000); + phy_write(phydev, 0x1f, 0x0001); + phy_modify(phydev, 0x14, 0xe000, 0x6000); + phy_write(phydev, 0x1f, 0x0000); + + vsc73xx_config_init(phydev); + + return 0; +} + +static int vsc73xx_config_aneg(struct phy_device *phydev) +{ + /* The VSC73xx switches does not like to be instructed to + * do autonegotiation in any way, it prefers that you just go + * with the power-on/reset defaults. Writing some registers will + * just make autonegotiation permanently fail. + */ + return 0; +} + +/* This adds a skew for both TX and RX clocks, so the skew should only be + * applied to "rgmii-id" interfaces. It may not work as expected + * on "rgmii-txid", "rgmii-rxid" or "rgmii" interfaces. + */ +static int vsc8601_add_skew(struct phy_device *phydev) +{ + int ret; + + ret = phy_read(phydev, MII_VSC8601_EPHY_CTL); + if (ret < 0) + return ret; + + ret |= MII_VSC8601_EPHY_CTL_RGMII_SKEW; + return phy_write(phydev, MII_VSC8601_EPHY_CTL, ret); +} + +static int vsc8601_config_init(struct phy_device *phydev) +{ + int ret = 0; + + if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) + ret = vsc8601_add_skew(phydev); + + if (ret < 0) + return ret; + + return 0; +} + +static int vsc82xx_config_intr(struct phy_device *phydev) +{ + int err; + + if (phydev->interrupts == PHY_INTERRUPT_ENABLED) + /* Don't bother to ACK the interrupts since the 824x cannot + * clear the interrupts if they are disabled. + */ + err = phy_write(phydev, MII_VSC8244_IMASK, + (phydev->drv->phy_id == PHY_ID_VSC8234 || + phydev->drv->phy_id == PHY_ID_VSC8244 || + phydev->drv->phy_id == PHY_ID_VSC8572 || + phydev->drv->phy_id == PHY_ID_VSC8601) ? + MII_VSC8244_IMASK_MASK : + MII_VSC8221_IMASK_MASK); + else { + /* The Vitesse PHY cannot clear the interrupt + * once it has disabled them, so we clear them first + */ + err = phy_read(phydev, MII_VSC8244_ISTAT); + + if (err < 0) + return err; + + err = phy_write(phydev, MII_VSC8244_IMASK, 0); + } + + return err; +} + +static irqreturn_t vsc82xx_handle_interrupt(struct phy_device *phydev) +{ + int irq_status, irq_mask; + + if (phydev->drv->phy_id == PHY_ID_VSC8244 || + phydev->drv->phy_id == PHY_ID_VSC8572 || + phydev->drv->phy_id == PHY_ID_VSC8601) + irq_mask = MII_VSC8244_ISTAT_MASK; + else + irq_mask = MII_VSC8221_ISTAT_MASK; + + irq_status = phy_read(phydev, MII_VSC8244_ISTAT); + if (irq_status < 0) { + phy_error(phydev); + return IRQ_NONE; + } + + if (!(irq_status & irq_mask)) + return IRQ_NONE; + + phy_trigger_machine(phydev); + + return IRQ_HANDLED; +} + +static int vsc8221_config_init(struct phy_device *phydev) +{ + int err; + + err = phy_write(phydev, MII_VSC8244_AUX_CONSTAT, + MII_VSC8221_AUXCONSTAT_INIT); + return err; + + /* Perhaps we should set EXT_CON1 based on the interface? + * Options are 802.3Z SerDes or SGMII + */ +} + +/* vsc82x4_config_autocross_enable - Enable auto MDI/MDI-X for forced links + * @phydev: target phy_device struct + * + * Enable auto MDI/MDI-X when in 10/100 forced link speeds by writing + * special values in the VSC8234/VSC8244 extended reserved registers + */ +static int vsc82x4_config_autocross_enable(struct phy_device *phydev) +{ + int ret; + + if (phydev->autoneg == AUTONEG_ENABLE || phydev->speed > SPEED_100) + return 0; + + /* map extended registers set 0x10 - 0x1e */ + ret = phy_write(phydev, MII_VSC82X4_EXT_PAGE_ACCESS, 0x52b5); + if (ret >= 0) + ret = phy_write(phydev, MII_VSC82X4_EXT_PAGE_18E, 0x0012); + if (ret >= 0) + ret = phy_write(phydev, MII_VSC82X4_EXT_PAGE_17E, 0x2803); + if (ret >= 0) + ret = phy_write(phydev, MII_VSC82X4_EXT_PAGE_16E, 0x87fa); + /* map standard registers set 0x10 - 0x1e */ + if (ret >= 0) + ret = phy_write(phydev, MII_VSC82X4_EXT_PAGE_ACCESS, 0x0000); + else + phy_write(phydev, MII_VSC82X4_EXT_PAGE_ACCESS, 0x0000); + + return ret; +} + +/* vsc82x4_config_aneg - restart auto-negotiation or write BMCR + * @phydev: target phy_device struct + * + * Description: If auto-negotiation is enabled, we configure the + * advertising, and then restart auto-negotiation. If it is not + * enabled, then we write the BMCR and also start the auto + * MDI/MDI-X feature + */ +static int vsc82x4_config_aneg(struct phy_device *phydev) +{ + int ret; + + /* Enable auto MDI/MDI-X when in 10/100 forced link speeds by + * writing special values in the VSC8234 extended reserved registers + */ + if (phydev->autoneg != AUTONEG_ENABLE && phydev->speed <= SPEED_100) { + ret = genphy_setup_forced(phydev); + + if (ret < 0) /* error */ + return ret; + + return vsc82x4_config_autocross_enable(phydev); + } + + return genphy_config_aneg(phydev); +} + +/* Vitesse 82xx */ +static struct phy_driver vsc82xx_driver[] = { +{ + .phy_id = PHY_ID_VSC8234, + .name = "Vitesse VSC8234", + .phy_id_mask = 0x000ffff0, + /* PHY_GBIT_FEATURES */ + .config_init = &vsc824x_config_init, + .config_aneg = &vsc82x4_config_aneg, + .config_intr = &vsc82xx_config_intr, + .handle_interrupt = &vsc82xx_handle_interrupt, +}, { + .phy_id = PHY_ID_VSC8244, + .name = "Vitesse VSC8244", + .phy_id_mask = 0x000fffc0, + /* PHY_GBIT_FEATURES */ + .config_init = &vsc824x_config_init, + .config_aneg = &vsc82x4_config_aneg, + .config_intr = &vsc82xx_config_intr, + .handle_interrupt = &vsc82xx_handle_interrupt, +}, { + .phy_id = PHY_ID_VSC8572, + .name = "Vitesse VSC8572", + .phy_id_mask = 0x000ffff0, + /* PHY_GBIT_FEATURES */ + .config_init = &vsc824x_config_init, + .config_aneg = &vsc82x4_config_aneg, + .config_intr = &vsc82xx_config_intr, + .handle_interrupt = &vsc82xx_handle_interrupt, +}, { + .phy_id = PHY_ID_VSC8601, + .name = "Vitesse VSC8601", + .phy_id_mask = 0x000ffff0, + /* PHY_GBIT_FEATURES */ + .config_init = &vsc8601_config_init, + .config_intr = &vsc82xx_config_intr, + .handle_interrupt = &vsc82xx_handle_interrupt, +}, { + .phy_id = PHY_ID_VSC7385, + .name = "Vitesse VSC7385", + .phy_id_mask = 0x000ffff0, + /* PHY_GBIT_FEATURES */ + .config_init = vsc738x_config_init, + .config_aneg = vsc73xx_config_aneg, + .read_page = vsc73xx_read_page, + .write_page = vsc73xx_write_page, +}, { + .phy_id = PHY_ID_VSC7388, + .name = "Vitesse VSC7388", + .phy_id_mask = 0x000ffff0, + /* PHY_GBIT_FEATURES */ + .config_init = vsc738x_config_init, + .config_aneg = vsc73xx_config_aneg, + .read_page = vsc73xx_read_page, + .write_page = vsc73xx_write_page, +}, { + .phy_id = PHY_ID_VSC7395, + .name = "Vitesse VSC7395", + .phy_id_mask = 0x000ffff0, + /* PHY_GBIT_FEATURES */ + .config_init = vsc739x_config_init, + .config_aneg = vsc73xx_config_aneg, + .read_page = vsc73xx_read_page, + .write_page = vsc73xx_write_page, +}, { + .phy_id = PHY_ID_VSC7398, + .name = "Vitesse VSC7398", + .phy_id_mask = 0x000ffff0, + /* PHY_GBIT_FEATURES */ + .config_init = vsc739x_config_init, + .config_aneg = vsc73xx_config_aneg, + .read_page = vsc73xx_read_page, + .write_page = vsc73xx_write_page, +}, { + .phy_id = PHY_ID_VSC8662, + .name = "Vitesse VSC8662", + .phy_id_mask = 0x000ffff0, + /* PHY_GBIT_FEATURES */ + .config_init = &vsc824x_config_init, + .config_aneg = &vsc82x4_config_aneg, + .config_intr = &vsc82xx_config_intr, + .handle_interrupt = &vsc82xx_handle_interrupt, +}, { + /* Vitesse 8221 */ + .phy_id = PHY_ID_VSC8221, + .phy_id_mask = 0x000ffff0, + .name = "Vitesse VSC8221", + /* PHY_GBIT_FEATURES */ + .config_init = &vsc8221_config_init, + .config_intr = &vsc82xx_config_intr, + .handle_interrupt = &vsc82xx_handle_interrupt, +}, { + /* Vitesse 8211 */ + .phy_id = PHY_ID_VSC8211, + .phy_id_mask = 0x000ffff0, + .name = "Vitesse VSC8211", + /* PHY_GBIT_FEATURES */ + .config_init = &vsc8221_config_init, + .config_intr = &vsc82xx_config_intr, + .handle_interrupt = &vsc82xx_handle_interrupt, +} }; + +module_phy_driver(vsc82xx_driver); + +static struct mdio_device_id __maybe_unused vitesse_tbl[] = { + { PHY_ID_VSC8234, 0x000ffff0 }, + { PHY_ID_VSC8244, 0x000fffc0 }, + { PHY_ID_VSC8572, 0x000ffff0 }, + { PHY_ID_VSC7385, 0x000ffff0 }, + { PHY_ID_VSC7388, 0x000ffff0 }, + { PHY_ID_VSC7395, 0x000ffff0 }, + { PHY_ID_VSC7398, 0x000ffff0 }, + { PHY_ID_VSC8662, 0x000ffff0 }, + { PHY_ID_VSC8221, 0x000ffff0 }, + { PHY_ID_VSC8211, 0x000ffff0 }, + { } +}; + +MODULE_DEVICE_TABLE(mdio, vitesse_tbl); |