6 files changed, 32 insertions, 4 deletions
diff --git a/drivers/net/wireless/ath/ath10k/Kconfig b/drivers/net/wireless/ath/ath10k/Kconfig
index e6ea884caf..4f385f4a8c 100644
--- a/drivers/net/wireless/ath/ath10k/Kconfig
+++ b/drivers/net/wireless/ath/ath10k/Kconfig
@@ -45,6 +45,7 @@ config ATH10K_SNOC
 	depends on ATH10K
 	depends on ARCH_QCOM || COMPILE_TEST
 	depends on QCOM_SMEM
+	depends on QCOM_RPROC_COMMON || QCOM_RPROC_COMMON=n
 	select QCOM_SCM
 	select QCOM_QMI_HELPERS
 	help
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 9ce6f49ab2..fa5e2e6518 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -720,6 +720,9 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.max_spatial_stream = 4,
 		.fw = {
 			.dir = WCN3990_HW_1_0_FW_DIR,
+			.board = WCN3990_HW_1_0_BOARD_DATA_FILE,
+			.board_size = WCN3990_BOARD_DATA_SZ,
+			.board_ext_size = WCN3990_BOARD_EXT_DATA_SZ,
 		},
 		.sw_decrypt_mcast_mgmt = true,
 		.rx_desc_ops = &wcn3990_rx_desc_ops,
diff --git a/drivers/net/wireless/ath/ath10k/debugfs_sta.c b/drivers/net/wireless/ath/ath10k/debugfs_sta.c
index 394bf3c32a..0f6de862c3 100644
--- a/drivers/net/wireless/ath/ath10k/debugfs_sta.c
+++ b/drivers/net/wireless/ath/ath10k/debugfs_sta.c
@@ -439,7 +439,7 @@ ath10k_dbg_sta_write_peer_debug_trigger(struct file *file,
 	}
 out:
 	mutex_unlock(&ar->conf_mutex);
-	return count;
+	return ret ?: count;
 }
 
 static const struct file_operations fops_peer_debug_trigger = {
diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
index 93c0730919..9aa2d821b5 100644
--- a/drivers/net/wireless/ath/ath10k/hw.h
+++ b/drivers/net/wireless/ath/ath10k/hw.h
@@ -133,6 +133,7 @@ enum qca9377_chip_id_rev {
 /* WCN3990 1.0 definitions */
 #define WCN3990_HW_1_0_DEV_VERSION	ATH10K_HW_WCN3990
 #define WCN3990_HW_1_0_FW_DIR		ATH10K_FW_DIR "/WCN3990/hw1.0"
+#define WCN3990_HW_1_0_BOARD_DATA_FILE "board.bin"
 
 #define ATH10K_FW_FILE_BASE		"firmware"
 #define ATH10K_FW_API_MAX		6
diff --git a/drivers/net/wireless/ath/ath10k/targaddrs.h b/drivers/net/wireless/ath/ath10k/targaddrs.h
index ec556bb88d..ba37e6c7ce 100644
--- a/drivers/net/wireless/ath/ath10k/targaddrs.h
+++ b/drivers/net/wireless/ath/ath10k/targaddrs.h
@@ -491,4 +491,7 @@ struct host_interest {
 #define QCA4019_BOARD_DATA_SZ	  12064
 #define QCA4019_BOARD_EXT_DATA_SZ 0
 
+#define WCN3990_BOARD_DATA_SZ	  26328
+#define WCN3990_BOARD_EXT_DATA_SZ 0
+
 #endif /* __TARGADDRS_H__ */
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 2e9661f4be..80d255aaff 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -1763,12 +1763,32 @@ void ath10k_wmi_put_wmi_channel(struct ath10k *ar, struct wmi_channel *ch,
 
 int ath10k_wmi_wait_for_service_ready(struct ath10k *ar)
 {
-	unsigned long time_left;
+	unsigned long time_left, i;
 
 	time_left = wait_for_completion_timeout(&ar->wmi.service_ready,
 						WMI_SERVICE_READY_TIMEOUT_HZ);
-	if (!time_left)
-		return -ETIMEDOUT;
+	if (!time_left) {
+		/* Sometimes the PCI HIF doesn't receive interrupt
+		 * for the service ready message even if the buffer
+		 * was completed. PCIe sniffer shows that it's
+		 * because the corresponding CE ring doesn't fires
+		 * it. Workaround here by polling CE rings once.
+		 */
+		ath10k_warn(ar, "failed to receive service ready completion, polling..\n");
+
+		for (i = 0; i < CE_COUNT; i++)
+			ath10k_hif_send_complete_check(ar, i, 1);
+
+		time_left = wait_for_completion_timeout(&ar->wmi.service_ready,
+							WMI_SERVICE_READY_TIMEOUT_HZ);
+		if (!time_left) {
+			ath10k_warn(ar, "polling timed out\n");
+			return -ETIMEDOUT;
+		}
+
+		ath10k_warn(ar, "service ready completion received, continuing normally\n");
+	}
+
 	return 0;
 }