summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/ath
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/ath')
-rw-r--r--drivers/net/wireless/ath/ar5523/ar5523.c14
-rw-r--r--drivers/net/wireless/ath/ath10k/core.c3
-rw-r--r--drivers/net/wireless/ath/ath10k/debugfs_sta.c2
-rw-r--r--drivers/net/wireless/ath/ath10k/hw.h1
-rw-r--r--drivers/net/wireless/ath/ath10k/targaddrs.h3
-rw-r--r--drivers/net/wireless/ath/ath10k/wmi.c26
-rw-r--r--drivers/net/wireless/ath/ath11k/mac.c9
-rw-r--r--drivers/net/wireless/ath/ath12k/qmi.c3
-rw-r--r--drivers/net/wireless/ath/ath12k/wmi.c2
-rw-r--r--drivers/net/wireless/ath/carl9170/tx.c3
-rw-r--r--drivers/net/wireless/ath/carl9170/usb.c32
11 files changed, 84 insertions, 14 deletions
diff --git a/drivers/net/wireless/ath/ar5523/ar5523.c b/drivers/net/wireless/ath/ar5523/ar5523.c
index a742cec44e..91ddbe6136 100644
--- a/drivers/net/wireless/ath/ar5523/ar5523.c
+++ b/drivers/net/wireless/ath/ar5523/ar5523.c
@@ -1590,6 +1590,20 @@ static int ar5523_probe(struct usb_interface *intf,
struct ar5523 *ar;
int error = -ENOMEM;
+ static const u8 bulk_ep_addr[] = {
+ AR5523_CMD_TX_PIPE | USB_DIR_OUT,
+ AR5523_DATA_TX_PIPE | USB_DIR_OUT,
+ AR5523_CMD_RX_PIPE | USB_DIR_IN,
+ AR5523_DATA_RX_PIPE | USB_DIR_IN,
+ 0};
+
+ if (!usb_check_bulk_endpoints(intf, bulk_ep_addr)) {
+ dev_err(&dev->dev,
+ "Could not find all expected endpoints\n");
+ error = -ENODEV;
+ goto out;
+ }
+
/*
* Load firmware if the device requires it. This will return
* -ENXIO on success and we'll get called back afer the usb
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 0032f8aa89..4e3736d7af 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -720,6 +720,9 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.max_spatial_stream = 4,
.fw = {
.dir = WCN3990_HW_1_0_FW_DIR,
+ .board = WCN3990_HW_1_0_BOARD_DATA_FILE,
+ .board_size = WCN3990_BOARD_DATA_SZ,
+ .board_ext_size = WCN3990_BOARD_EXT_DATA_SZ,
},
.sw_decrypt_mcast_mgmt = true,
.rx_desc_ops = &wcn3990_rx_desc_ops,
diff --git a/drivers/net/wireless/ath/ath10k/debugfs_sta.c b/drivers/net/wireless/ath/ath10k/debugfs_sta.c
index 394bf3c32a..0f6de862c3 100644
--- a/drivers/net/wireless/ath/ath10k/debugfs_sta.c
+++ b/drivers/net/wireless/ath/ath10k/debugfs_sta.c
@@ -439,7 +439,7 @@ ath10k_dbg_sta_write_peer_debug_trigger(struct file *file,
}
out:
mutex_unlock(&ar->conf_mutex);
- return count;
+ return ret ?: count;
}
static const struct file_operations fops_peer_debug_trigger = {
diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
index 93c0730919..9aa2d821b5 100644
--- a/drivers/net/wireless/ath/ath10k/hw.h
+++ b/drivers/net/wireless/ath/ath10k/hw.h
@@ -133,6 +133,7 @@ enum qca9377_chip_id_rev {
/* WCN3990 1.0 definitions */
#define WCN3990_HW_1_0_DEV_VERSION ATH10K_HW_WCN3990
#define WCN3990_HW_1_0_FW_DIR ATH10K_FW_DIR "/WCN3990/hw1.0"
+#define WCN3990_HW_1_0_BOARD_DATA_FILE "board.bin"
#define ATH10K_FW_FILE_BASE "firmware"
#define ATH10K_FW_API_MAX 6
diff --git a/drivers/net/wireless/ath/ath10k/targaddrs.h b/drivers/net/wireless/ath/ath10k/targaddrs.h
index ec556bb88d..ba37e6c7ce 100644
--- a/drivers/net/wireless/ath/ath10k/targaddrs.h
+++ b/drivers/net/wireless/ath/ath10k/targaddrs.h
@@ -491,4 +491,7 @@ struct host_interest {
#define QCA4019_BOARD_DATA_SZ 12064
#define QCA4019_BOARD_EXT_DATA_SZ 0
+#define WCN3990_BOARD_DATA_SZ 26328
+#define WCN3990_BOARD_EXT_DATA_SZ 0
+
#endif /* __TARGADDRS_H__ */
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 88befe92f9..24f1ab2785 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -1763,12 +1763,32 @@ void ath10k_wmi_put_wmi_channel(struct ath10k *ar, struct wmi_channel *ch,
int ath10k_wmi_wait_for_service_ready(struct ath10k *ar)
{
- unsigned long time_left;
+ unsigned long time_left, i;
time_left = wait_for_completion_timeout(&ar->wmi.service_ready,
WMI_SERVICE_READY_TIMEOUT_HZ);
- if (!time_left)
- return -ETIMEDOUT;
+ if (!time_left) {
+ /* Sometimes the PCI HIF doesn't receive interrupt
+ * for the service ready message even if the buffer
+ * was completed. PCIe sniffer shows that it's
+ * because the corresponding CE ring doesn't fires
+ * it. Workaround here by polling CE rings once.
+ */
+ ath10k_warn(ar, "failed to receive service ready completion, polling..\n");
+
+ for (i = 0; i < CE_COUNT; i++)
+ ath10k_hif_send_complete_check(ar, i, 1);
+
+ time_left = wait_for_completion_timeout(&ar->wmi.service_ready,
+ WMI_SERVICE_READY_TIMEOUT_HZ);
+ if (!time_left) {
+ ath10k_warn(ar, "polling timed out\n");
+ return -ETIMEDOUT;
+ }
+
+ ath10k_warn(ar, "service ready completion received, continuing normally\n");
+ }
+
return 0;
}
diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index cc80310088..a46b8e677c 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -1234,14 +1234,7 @@ static int ath11k_mac_vif_setup_ps(struct ath11k_vif *arvif)
enable_ps = arvif->ps;
- if (!arvif->is_started) {
- /* mac80211 can update vif powersave state while disconnected.
- * Firmware doesn't behave nicely and consumes more power than
- * necessary if PS is disabled on a non-started vdev. Hence
- * force-enable PS for non-running vdevs.
- */
- psmode = WMI_STA_PS_MODE_ENABLED;
- } else if (enable_ps) {
+ if (enable_ps) {
psmode = WMI_STA_PS_MODE_ENABLED;
param = WMI_STA_PS_PARAM_INACTIVITY_TIME;
diff --git a/drivers/net/wireless/ath/ath12k/qmi.c b/drivers/net/wireless/ath/ath12k/qmi.c
index 77a132f6bb..b3440a5e38 100644
--- a/drivers/net/wireless/ath/ath12k/qmi.c
+++ b/drivers/net/wireless/ath/ath12k/qmi.c
@@ -2941,6 +2941,9 @@ static const struct qmi_msg_handler ath12k_qmi_msg_handlers[] = {
.decoded_size = sizeof(struct qmi_wlanfw_fw_ready_ind_msg_v01),
.fn = ath12k_qmi_msg_fw_ready_cb,
},
+
+ /* end of list */
+ {},
};
static int ath12k_qmi_ops_new_server(struct qmi_handle *qmi_hdl,
diff --git a/drivers/net/wireless/ath/ath12k/wmi.c b/drivers/net/wireless/ath/ath12k/wmi.c
index 11cc3005c0..035d8f247e 100644
--- a/drivers/net/wireless/ath/ath12k/wmi.c
+++ b/drivers/net/wireless/ath/ath12k/wmi.c
@@ -1836,7 +1836,7 @@ static void ath12k_wmi_copy_peer_flags(struct wmi_peer_assoc_complete_cmd *cmd,
if (arg->bw_160)
cmd->peer_flags |= cpu_to_le32(WMI_PEER_160MHZ);
if (arg->bw_320)
- cmd->peer_flags |= cpu_to_le32(WMI_PEER_EXT_320MHZ);
+ cmd->peer_flags_ext |= cpu_to_le32(WMI_PEER_EXT_320MHZ);
/* Typically if STBC is enabled for VHT it should be enabled
* for HT as well
diff --git a/drivers/net/wireless/ath/carl9170/tx.c b/drivers/net/wireless/ath/carl9170/tx.c
index 6bb9aa2bfe..88ef6e023f 100644
--- a/drivers/net/wireless/ath/carl9170/tx.c
+++ b/drivers/net/wireless/ath/carl9170/tx.c
@@ -280,7 +280,8 @@ static void carl9170_tx_release(struct kref *ref)
* carl9170_tx_fill_rateinfo() has filled the rate information
* before we get to this point.
*/
- memset_after(&txinfo->status, 0, rates);
+ memset(&txinfo->pad, 0, sizeof(txinfo->pad));
+ memset(&txinfo->rate_driver_data, 0, sizeof(txinfo->rate_driver_data));
if (atomic_read(&ar->tx_total_queued))
ar->tx_schedule = true;
diff --git a/drivers/net/wireless/ath/carl9170/usb.c b/drivers/net/wireless/ath/carl9170/usb.c
index c4edf83559..a3e03580cd 100644
--- a/drivers/net/wireless/ath/carl9170/usb.c
+++ b/drivers/net/wireless/ath/carl9170/usb.c
@@ -1069,6 +1069,38 @@ static int carl9170_usb_probe(struct usb_interface *intf,
ar->usb_ep_cmd_is_bulk = true;
}
+ /* Verify that all expected endpoints are present */
+ if (ar->usb_ep_cmd_is_bulk) {
+ u8 bulk_ep_addr[] = {
+ AR9170_USB_EP_RX | USB_DIR_IN,
+ AR9170_USB_EP_TX | USB_DIR_OUT,
+ AR9170_USB_EP_CMD | USB_DIR_OUT,
+ 0};
+ u8 int_ep_addr[] = {
+ AR9170_USB_EP_IRQ | USB_DIR_IN,
+ 0};
+ if (!usb_check_bulk_endpoints(intf, bulk_ep_addr) ||
+ !usb_check_int_endpoints(intf, int_ep_addr))
+ err = -ENODEV;
+ } else {
+ u8 bulk_ep_addr[] = {
+ AR9170_USB_EP_RX | USB_DIR_IN,
+ AR9170_USB_EP_TX | USB_DIR_OUT,
+ 0};
+ u8 int_ep_addr[] = {
+ AR9170_USB_EP_IRQ | USB_DIR_IN,
+ AR9170_USB_EP_CMD | USB_DIR_OUT,
+ 0};
+ if (!usb_check_bulk_endpoints(intf, bulk_ep_addr) ||
+ !usb_check_int_endpoints(intf, int_ep_addr))
+ err = -ENODEV;
+ }
+
+ if (err) {
+ carl9170_free(ar);
+ return err;
+ }
+
usb_set_intfdata(intf, ar);
SET_IEEE80211_DEV(ar->hw, &intf->dev);
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-16 02:43:19 +0000