summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h')
-rw-r--r--drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h95
1 files changed, 95 insertions, 0 deletions
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h
new file mode 100644
index 000000000..2be2986d2
--- /dev/null
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Copyright (c) 2014 Broadcom Corporation
+ */
+#ifndef BRCMFMAC_COMMON_H
+#define BRCMFMAC_COMMON_H
+
+#include <linux/platform_device.h>
+#include <linux/platform_data/brcmfmac.h>
+#include "fwil_types.h"
+
+#define BRCMF_FW_ALTPATH_LEN 256
+
+/* Definitions for the module global and device specific settings are defined
+ * here. Two structs are used for them. brcmf_mp_global_t and brcmf_mp_device.
+ * The mp_global is instantiated once in a global struct and gets initialized
+ * by the common_attach function which should be called before any other
+ * (module) initiliazation takes place. The device specific settings is part
+ * of the drvr struct and should be initialized on every brcmf_attach.
+ */
+
+/**
+ * struct brcmf_mp_global_t - Global module paramaters.
+ *
+ * @firmware_path: Alternative firmware path.
+ */
+struct brcmf_mp_global_t {
+ char firmware_path[BRCMF_FW_ALTPATH_LEN];
+};
+
+extern struct brcmf_mp_global_t brcmf_mp_global;
+
+/**
+ * struct brcmf_mp_device - Device module paramaters.
+ *
+ * @p2p_enable: Legacy P2P0 enable (old wpa_supplicant).
+ * @feature_disable: Feature_disable bitmask.
+ * @fcmode: FWS flow control.
+ * @roamoff: Firmware roaming off?
+ * @ignore_probe_fail: Ignore probe failure.
+ * @trivial_ccode_map: Assume firmware uses ISO3166 country codes with rev 0
+ * @country_codes: If available, pointer to struct for translating country codes
+ * @bus: Bus specific platform data. Only SDIO at the mmoment.
+ */
+struct brcmf_mp_device {
+ bool p2p_enable;
+ unsigned int feature_disable;
+ int fcmode;
+ bool roamoff;
+ bool iapp;
+ bool ignore_probe_fail;
+ bool trivial_ccode_map;
+ struct brcmfmac_pd_cc *country_codes;
+ const char *board_type;
+ unsigned char mac[ETH_ALEN];
+ const char *antenna_sku;
+ const void *cal_blob;
+ int cal_size;
+ union {
+ struct brcmfmac_sdio_pd sdio;
+ } bus;
+};
+
+void brcmf_c_set_joinpref_default(struct brcmf_if *ifp);
+
+struct brcmf_mp_device *brcmf_get_module_param(struct device *dev,
+ enum brcmf_bus_type bus_type,
+ u32 chip, u32 chiprev);
+void brcmf_release_module_param(struct brcmf_mp_device *module_param);
+
+/* Sets dongle media info (drv_version, mac address). */
+int brcmf_c_preinit_dcmds(struct brcmf_if *ifp);
+int brcmf_c_set_cur_etheraddr(struct brcmf_if *ifp, const u8 *addr);
+
+#ifdef CONFIG_DMI
+void brcmf_dmi_probe(struct brcmf_mp_device *settings, u32 chip, u32 chiprev);
+#else
+static inline void
+brcmf_dmi_probe(struct brcmf_mp_device *settings, u32 chip, u32 chiprev) {}
+#endif
+
+#ifdef CONFIG_ACPI
+void brcmf_acpi_probe(struct device *dev, enum brcmf_bus_type bus_type,
+ struct brcmf_mp_device *settings);
+#else
+static inline void brcmf_acpi_probe(struct device *dev,
+ enum brcmf_bus_type bus_type,
+ struct brcmf_mp_device *settings) {}
+#endif
+
+u8 brcmf_map_prio_to_prec(void *cfg, u8 prio);
+
+u8 brcmf_map_prio_to_aci(void *cfg, u8 prio);
+
+#endif /* BRCMFMAC_COMMON_H */