summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/intel/iwlwifi/dvm/scan.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/intel/iwlwifi/dvm/scan.c')
-rw-r--r--drivers/net/wireless/intel/iwlwifi/dvm/scan.c1062
1 files changed, 1062 insertions, 0 deletions
diff --git a/drivers/net/wireless/intel/iwlwifi/dvm/scan.c b/drivers/net/wireless/intel/iwlwifi/dvm/scan.c
new file mode 100644
index 000000000..a7e85c5c8
--- /dev/null
+++ b/drivers/net/wireless/intel/iwlwifi/dvm/scan.c
@@ -0,0 +1,1062 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/******************************************************************************
+ *
+ * Copyright(c) 2008 - 2014 Intel Corporation. All rights reserved.
+ * Copyright(c) 2018 Intel Corporation
+ *****************************************************************************/
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/etherdevice.h>
+#include <net/mac80211.h>
+
+#include "dev.h"
+#include "agn.h"
+
+/* For active scan, listen ACTIVE_DWELL_TIME (msec) on each channel after
+ * sending probe req. This should be set long enough to hear probe responses
+ * from more than one AP. */
+#define IWL_ACTIVE_DWELL_TIME_24 (30) /* all times in msec */
+#define IWL_ACTIVE_DWELL_TIME_52 (20)
+
+#define IWL_ACTIVE_DWELL_FACTOR_24GHZ (3)
+#define IWL_ACTIVE_DWELL_FACTOR_52GHZ (2)
+
+/* For passive scan, listen PASSIVE_DWELL_TIME (msec) on each channel.
+ * Must be set longer than active dwell time.
+ * For the most reliable scan, set > AP beacon interval (typically 100msec). */
+#define IWL_PASSIVE_DWELL_TIME_24 (20) /* all times in msec */
+#define IWL_PASSIVE_DWELL_TIME_52 (10)
+#define IWL_PASSIVE_DWELL_BASE (100)
+#define IWL_CHANNEL_TUNE_TIME 5
+#define MAX_SCAN_CHANNEL 50
+
+/* For reset radio, need minimal dwell time only */
+#define IWL_RADIO_RESET_DWELL_TIME 5
+
+static int iwl_send_scan_abort(struct iwl_priv *priv)
+{
+ int ret;
+ struct iwl_host_cmd cmd = {
+ .id = REPLY_SCAN_ABORT_CMD,
+ .flags = CMD_WANT_SKB,
+ };
+ __le32 *status;
+
+ /* Exit instantly with error when device is not ready
+ * to receive scan abort command or it does not perform
+ * hardware scan currently */
+ if (!test_bit(STATUS_READY, &priv->status) ||
+ !test_bit(STATUS_SCAN_HW, &priv->status) ||
+ test_bit(STATUS_FW_ERROR, &priv->status))
+ return -EIO;
+
+ ret = iwl_dvm_send_cmd(priv, &cmd);
+ if (ret)
+ return ret;
+
+ status = (void *)cmd.resp_pkt->data;
+ if (*status != CAN_ABORT_STATUS) {
+ /* The scan abort will return 1 for success or
+ * 2 for "failure". A failure condition can be
+ * due to simply not being in an active scan which
+ * can occur if we send the scan abort before we
+ * the microcode has notified us that a scan is
+ * completed. */
+ IWL_DEBUG_SCAN(priv, "SCAN_ABORT ret %d.\n",
+ le32_to_cpu(*status));
+ ret = -EIO;
+ }
+
+ iwl_free_resp(&cmd);
+ return ret;
+}
+
+static void iwl_complete_scan(struct iwl_priv *priv, bool aborted)
+{
+ struct cfg80211_scan_info info = {
+ .aborted = aborted,
+ };
+
+ /* check if scan was requested from mac80211 */
+ if (priv->scan_request) {
+ IWL_DEBUG_SCAN(priv, "Complete scan in mac80211\n");
+ ieee80211_scan_completed(priv->hw, &info);
+ }
+
+ priv->scan_type = IWL_SCAN_NORMAL;
+ priv->scan_vif = NULL;
+ priv->scan_request = NULL;
+}
+
+static void iwl_process_scan_complete(struct iwl_priv *priv)
+{
+ bool aborted;
+
+ lockdep_assert_held(&priv->mutex);
+
+ if (!test_and_clear_bit(STATUS_SCAN_COMPLETE, &priv->status))
+ return;
+
+ IWL_DEBUG_SCAN(priv, "Completed scan.\n");
+
+ cancel_delayed_work(&priv->scan_check);
+
+ aborted = test_and_clear_bit(STATUS_SCAN_ABORTING, &priv->status);
+ if (aborted)
+ IWL_DEBUG_SCAN(priv, "Aborted scan completed.\n");
+
+ if (!test_and_clear_bit(STATUS_SCANNING, &priv->status)) {
+ IWL_DEBUG_SCAN(priv, "Scan already completed.\n");
+ goto out_settings;
+ }
+
+ if (priv->scan_type != IWL_SCAN_NORMAL && !aborted) {
+ int err;
+
+ /* Check if mac80211 requested scan during our internal scan */
+ if (priv->scan_request == NULL)
+ goto out_complete;
+
+ /* If so request a new scan */
+ err = iwl_scan_initiate(priv, priv->scan_vif, IWL_SCAN_NORMAL,
+ priv->scan_request->channels[0]->band);
+ if (err) {
+ IWL_DEBUG_SCAN(priv,
+ "failed to initiate pending scan: %d\n", err);
+ aborted = true;
+ goto out_complete;
+ }
+
+ return;
+ }
+
+out_complete:
+ iwl_complete_scan(priv, aborted);
+
+out_settings:
+ /* Can we still talk to firmware ? */
+ if (!iwl_is_ready_rf(priv))
+ return;
+
+ iwlagn_post_scan(priv);
+}
+
+void iwl_force_scan_end(struct iwl_priv *priv)
+{
+ lockdep_assert_held(&priv->mutex);
+
+ if (!test_bit(STATUS_SCANNING, &priv->status)) {
+ IWL_DEBUG_SCAN(priv, "Forcing scan end while not scanning\n");
+ return;
+ }
+
+ IWL_DEBUG_SCAN(priv, "Forcing scan end\n");
+ clear_bit(STATUS_SCANNING, &priv->status);
+ clear_bit(STATUS_SCAN_HW, &priv->status);
+ clear_bit(STATUS_SCAN_ABORTING, &priv->status);
+ clear_bit(STATUS_SCAN_COMPLETE, &priv->status);
+ iwl_complete_scan(priv, true);
+}
+
+static void iwl_do_scan_abort(struct iwl_priv *priv)
+{
+ int ret;
+
+ lockdep_assert_held(&priv->mutex);
+
+ if (!test_bit(STATUS_SCANNING, &priv->status)) {
+ IWL_DEBUG_SCAN(priv, "Not performing scan to abort\n");
+ return;
+ }
+
+ if (test_and_set_bit(STATUS_SCAN_ABORTING, &priv->status)) {
+ IWL_DEBUG_SCAN(priv, "Scan abort in progress\n");
+ return;
+ }
+
+ ret = iwl_send_scan_abort(priv);
+ if (ret) {
+ IWL_DEBUG_SCAN(priv, "Send scan abort failed %d\n", ret);
+ iwl_force_scan_end(priv);
+ } else
+ IWL_DEBUG_SCAN(priv, "Successfully send scan abort\n");
+}
+
+/*
+ * iwl_scan_cancel - Cancel any currently executing HW scan
+ */
+int iwl_scan_cancel(struct iwl_priv *priv)
+{
+ IWL_DEBUG_SCAN(priv, "Queuing abort scan\n");
+ queue_work(priv->workqueue, &priv->abort_scan);
+ return 0;
+}
+
+/*
+ * iwl_scan_cancel_timeout - Cancel any currently executing HW scan
+ * @ms: amount of time to wait (in milliseconds) for scan to abort
+ */
+void iwl_scan_cancel_timeout(struct iwl_priv *priv, unsigned long ms)
+{
+ unsigned long timeout = jiffies + msecs_to_jiffies(ms);
+
+ lockdep_assert_held(&priv->mutex);
+
+ IWL_DEBUG_SCAN(priv, "Scan cancel timeout\n");
+
+ iwl_do_scan_abort(priv);
+
+ while (time_before_eq(jiffies, timeout)) {
+ if (!test_bit(STATUS_SCAN_HW, &priv->status))
+ goto finished;
+ msleep(20);
+ }
+
+ return;
+
+ finished:
+ /*
+ * Now STATUS_SCAN_HW is clear. This means that the
+ * device finished, but the background work is going
+ * to execute at best as soon as we release the mutex.
+ * Since we need to be able to issue a new scan right
+ * after this function returns, run the complete here.
+ * The STATUS_SCAN_COMPLETE bit will then be cleared
+ * and prevent the background work from "completing"
+ * a possible new scan.
+ */
+ iwl_process_scan_complete(priv);
+}
+
+/* Service response to REPLY_SCAN_CMD (0x80) */
+static void iwl_rx_reply_scan(struct iwl_priv *priv,
+ struct iwl_rx_cmd_buffer *rxb)
+{
+#ifdef CONFIG_IWLWIFI_DEBUG
+ struct iwl_rx_packet *pkt = rxb_addr(rxb);
+ struct iwl_scanreq_notification *notif = (void *)pkt->data;
+
+ IWL_DEBUG_SCAN(priv, "Scan request status = 0x%x\n", notif->status);
+#endif
+}
+
+/* Service SCAN_START_NOTIFICATION (0x82) */
+static void iwl_rx_scan_start_notif(struct iwl_priv *priv,
+ struct iwl_rx_cmd_buffer *rxb)
+{
+ struct iwl_rx_packet *pkt = rxb_addr(rxb);
+ struct iwl_scanstart_notification *notif = (void *)pkt->data;
+
+ priv->scan_start_tsf = le32_to_cpu(notif->tsf_low);
+ IWL_DEBUG_SCAN(priv, "Scan start: "
+ "%d [802.11%s] "
+ "(TSF: 0x%08X:%08X) - %d (beacon timer %u)\n",
+ notif->channel,
+ notif->band ? "bg" : "a",
+ le32_to_cpu(notif->tsf_high),
+ le32_to_cpu(notif->tsf_low),
+ notif->status, notif->beacon_timer);
+}
+
+/* Service SCAN_RESULTS_NOTIFICATION (0x83) */
+static void iwl_rx_scan_results_notif(struct iwl_priv *priv,
+ struct iwl_rx_cmd_buffer *rxb)
+{
+#ifdef CONFIG_IWLWIFI_DEBUG
+ struct iwl_rx_packet *pkt = rxb_addr(rxb);
+ struct iwl_scanresults_notification *notif = (void *)pkt->data;
+
+ IWL_DEBUG_SCAN(priv, "Scan ch.res: "
+ "%d [802.11%s] "
+ "probe status: %u:%u "
+ "(TSF: 0x%08X:%08X) - %d "
+ "elapsed=%lu usec\n",
+ notif->channel,
+ notif->band ? "bg" : "a",
+ notif->probe_status, notif->num_probe_not_sent,
+ le32_to_cpu(notif->tsf_high),
+ le32_to_cpu(notif->tsf_low),
+ le32_to_cpu(notif->statistics[0]),
+ le32_to_cpu(notif->tsf_low) - priv->scan_start_tsf);
+#endif
+}
+
+/* Service SCAN_COMPLETE_NOTIFICATION (0x84) */
+static void iwl_rx_scan_complete_notif(struct iwl_priv *priv,
+ struct iwl_rx_cmd_buffer *rxb)
+{
+ struct iwl_rx_packet *pkt = rxb_addr(rxb);
+ struct iwl_scancomplete_notification *scan_notif = (void *)pkt->data;
+
+ IWL_DEBUG_SCAN(priv, "Scan complete: %d channels (TSF 0x%08X:%08X) - %d\n",
+ scan_notif->scanned_channels,
+ scan_notif->tsf_low,
+ scan_notif->tsf_high, scan_notif->status);
+
+ IWL_DEBUG_SCAN(priv, "Scan on %sGHz took %dms\n",
+ (priv->scan_band == NL80211_BAND_2GHZ) ? "2.4" : "5.2",
+ jiffies_to_msecs(jiffies - priv->scan_start));
+
+ /*
+ * When aborting, we run the scan completed background work inline
+ * and the background work must then do nothing. The SCAN_COMPLETE
+ * bit helps implement that logic and thus needs to be set before
+ * queueing the work. Also, since the scan abort waits for SCAN_HW
+ * to clear, we need to set SCAN_COMPLETE before clearing SCAN_HW
+ * to avoid a race there.
+ */
+ set_bit(STATUS_SCAN_COMPLETE, &priv->status);
+ clear_bit(STATUS_SCAN_HW, &priv->status);
+ queue_work(priv->workqueue, &priv->scan_completed);
+
+ if (priv->iw_mode != NL80211_IFTYPE_ADHOC &&
+ iwl_advanced_bt_coexist(priv) &&
+ priv->bt_status != scan_notif->bt_status) {
+ if (scan_notif->bt_status) {
+ /* BT on */
+ if (!priv->bt_ch_announce)
+ priv->bt_traffic_load =
+ IWL_BT_COEX_TRAFFIC_LOAD_HIGH;
+ /*
+ * otherwise, no traffic load information provided
+ * no changes made
+ */
+ } else {
+ /* BT off */
+ priv->bt_traffic_load =
+ IWL_BT_COEX_TRAFFIC_LOAD_NONE;
+ }
+ priv->bt_status = scan_notif->bt_status;
+ queue_work(priv->workqueue,
+ &priv->bt_traffic_change_work);
+ }
+}
+
+void iwl_setup_rx_scan_handlers(struct iwl_priv *priv)
+{
+ /* scan handlers */
+ priv->rx_handlers[REPLY_SCAN_CMD] = iwl_rx_reply_scan;
+ priv->rx_handlers[SCAN_START_NOTIFICATION] = iwl_rx_scan_start_notif;
+ priv->rx_handlers[SCAN_RESULTS_NOTIFICATION] =
+ iwl_rx_scan_results_notif;
+ priv->rx_handlers[SCAN_COMPLETE_NOTIFICATION] =
+ iwl_rx_scan_complete_notif;
+}
+
+static u16 iwl_get_active_dwell_time(struct iwl_priv *priv,
+ enum nl80211_band band, u8 n_probes)
+{
+ if (band == NL80211_BAND_5GHZ)
+ return IWL_ACTIVE_DWELL_TIME_52 +
+ IWL_ACTIVE_DWELL_FACTOR_52GHZ * (n_probes + 1);
+ else
+ return IWL_ACTIVE_DWELL_TIME_24 +
+ IWL_ACTIVE_DWELL_FACTOR_24GHZ * (n_probes + 1);
+}
+
+static u16 iwl_limit_dwell(struct iwl_priv *priv, u16 dwell_time)
+{
+ struct iwl_rxon_context *ctx;
+ int limits[NUM_IWL_RXON_CTX] = {};
+ int n_active = 0;
+ u16 limit;
+
+ BUILD_BUG_ON(NUM_IWL_RXON_CTX != 2);
+
+ /*
+ * If we're associated, we clamp the dwell time 98%
+ * of the beacon interval (minus 2 * channel tune time)
+ * If both contexts are active, we have to restrict to
+ * 1/2 of the minimum of them, because they might be in
+ * lock-step with the time inbetween only half of what
+ * time we'd have in each of them.
+ */
+ for_each_context(priv, ctx) {
+ switch (ctx->staging.dev_type) {
+ case RXON_DEV_TYPE_P2P:
+ /* no timing constraints */
+ continue;
+ case RXON_DEV_TYPE_ESS:
+ default:
+ /* timing constraints if associated */
+ if (!iwl_is_associated_ctx(ctx))
+ continue;
+ break;
+ case RXON_DEV_TYPE_CP:
+ case RXON_DEV_TYPE_2STA:
+ /*
+ * These seem to always have timers for TBTT
+ * active in uCode even when not associated yet.
+ */
+ break;
+ }
+
+ limits[n_active++] = ctx->beacon_int ?: IWL_PASSIVE_DWELL_BASE;
+ }
+
+ switch (n_active) {
+ case 0:
+ return dwell_time;
+ case 2:
+ limit = (limits[1] * 98) / 100 - IWL_CHANNEL_TUNE_TIME * 2;
+ limit /= 2;
+ dwell_time = min(limit, dwell_time);
+ fallthrough;
+ case 1:
+ limit = (limits[0] * 98) / 100 - IWL_CHANNEL_TUNE_TIME * 2;
+ limit /= n_active;
+ return min(limit, dwell_time);
+ default:
+ WARN_ON_ONCE(1);
+ return dwell_time;
+ }
+}
+
+static u16 iwl_get_passive_dwell_time(struct iwl_priv *priv,
+ enum nl80211_band band)
+{
+ u16 passive = (band == NL80211_BAND_2GHZ) ?
+ IWL_PASSIVE_DWELL_BASE + IWL_PASSIVE_DWELL_TIME_24 :
+ IWL_PASSIVE_DWELL_BASE + IWL_PASSIVE_DWELL_TIME_52;
+
+ return iwl_limit_dwell(priv, passive);
+}
+
+/* Return valid, unused, channel for a passive scan to reset the RF */
+static u8 iwl_get_single_channel_number(struct iwl_priv *priv,
+ enum nl80211_band band)
+{
+ struct ieee80211_supported_band *sband = priv->hw->wiphy->bands[band];
+ struct iwl_rxon_context *ctx;
+ int i;
+
+ for (i = 0; i < sband->n_channels; i++) {
+ bool busy = false;
+
+ for_each_context(priv, ctx) {
+ busy = sband->channels[i].hw_value ==
+ le16_to_cpu(ctx->staging.channel);
+ if (busy)
+ break;
+ }
+
+ if (busy)
+ continue;
+
+ if (!(sband->channels[i].flags & IEEE80211_CHAN_DISABLED))
+ return sband->channels[i].hw_value;
+ }
+
+ return 0;
+}
+
+static int iwl_get_channel_for_reset_scan(struct iwl_priv *priv,
+ struct ieee80211_vif *vif,
+ enum nl80211_band band,
+ struct iwl_scan_channel *scan_ch)
+{
+ const struct ieee80211_supported_band *sband;
+ u16 channel;
+
+ sband = iwl_get_hw_mode(priv, band);
+ if (!sband) {
+ IWL_ERR(priv, "invalid band\n");
+ return 0;
+ }
+
+ channel = iwl_get_single_channel_number(priv, band);
+ if (channel) {
+ scan_ch->channel = cpu_to_le16(channel);
+ scan_ch->type = SCAN_CHANNEL_TYPE_PASSIVE;
+ scan_ch->active_dwell =
+ cpu_to_le16(IWL_RADIO_RESET_DWELL_TIME);
+ scan_ch->passive_dwell =
+ cpu_to_le16(IWL_RADIO_RESET_DWELL_TIME);
+ /* Set txpower levels to defaults */
+ scan_ch->dsp_atten = 110;
+ if (band == NL80211_BAND_5GHZ)
+ scan_ch->tx_gain = ((1 << 5) | (3 << 3)) | 3;
+ else
+ scan_ch->tx_gain = ((1 << 5) | (5 << 3));
+ return 1;
+ }
+
+ IWL_ERR(priv, "no valid channel found\n");
+ return 0;
+}
+
+static int iwl_get_channels_for_scan(struct iwl_priv *priv,
+ struct ieee80211_vif *vif,
+ enum nl80211_band band,
+ u8 is_active, u8 n_probes,
+ struct iwl_scan_channel *scan_ch)
+{
+ struct ieee80211_channel *chan;
+ const struct ieee80211_supported_band *sband;
+ u16 passive_dwell = 0;
+ u16 active_dwell = 0;
+ int added, i;
+ u16 channel;
+
+ sband = iwl_get_hw_mode(priv, band);
+ if (!sband)
+ return 0;
+
+ active_dwell = iwl_get_active_dwell_time(priv, band, n_probes);
+ passive_dwell = iwl_get_passive_dwell_time(priv, band);
+
+ if (passive_dwell <= active_dwell)
+ passive_dwell = active_dwell + 1;
+
+ for (i = 0, added = 0; i < priv->scan_request->n_channels; i++) {
+ chan = priv->scan_request->channels[i];
+
+ if (chan->band != band)
+ continue;
+
+ channel = chan->hw_value;
+ scan_ch->channel = cpu_to_le16(channel);
+
+ if (!is_active || (chan->flags & IEEE80211_CHAN_NO_IR))
+ scan_ch->type = SCAN_CHANNEL_TYPE_PASSIVE;
+ else
+ scan_ch->type = SCAN_CHANNEL_TYPE_ACTIVE;
+
+ if (n_probes)
+ scan_ch->type |= IWL_SCAN_PROBE_MASK(n_probes);
+
+ scan_ch->active_dwell = cpu_to_le16(active_dwell);
+ scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
+
+ /* Set txpower levels to defaults */
+ scan_ch->dsp_atten = 110;
+
+ /* NOTE: if we were doing 6Mb OFDM for scans we'd use
+ * power level:
+ * scan_ch->tx_gain = ((1 << 5) | (2 << 3)) | 3;
+ */
+ if (band == NL80211_BAND_5GHZ)
+ scan_ch->tx_gain = ((1 << 5) | (3 << 3)) | 3;
+ else
+ scan_ch->tx_gain = ((1 << 5) | (5 << 3));
+
+ IWL_DEBUG_SCAN(priv, "Scanning ch=%d prob=0x%X [%s %d]\n",
+ channel, le32_to_cpu(scan_ch->type),
+ (scan_ch->type & SCAN_CHANNEL_TYPE_ACTIVE) ?
+ "ACTIVE" : "PASSIVE",
+ (scan_ch->type & SCAN_CHANNEL_TYPE_ACTIVE) ?
+ active_dwell : passive_dwell);
+
+ scan_ch++;
+ added++;
+ }
+
+ IWL_DEBUG_SCAN(priv, "total channels to scan %d\n", added);
+ return added;
+}
+
+/*
+ * iwl_fill_probe_req - fill in all required fields and IE for probe request
+ */
+static u16 iwl_fill_probe_req(struct ieee80211_mgmt *frame, const u8 *ta,
+ const u8 *ies, int ie_len, const u8 *ssid,
+ u8 ssid_len, int left)
+{
+ int len = 0;
+ u8 *pos = NULL;
+
+ /* Make sure there is enough space for the probe request,
+ * two mandatory IEs and the data */
+ left -= 24;
+ if (left < 0)
+ return 0;
+
+ frame->frame_control = cpu_to_le16(IEEE80211_STYPE_PROBE_REQ);
+ eth_broadcast_addr(frame->da);
+ memcpy(frame->sa, ta, ETH_ALEN);
+ eth_broadcast_addr(frame->bssid);
+ frame->seq_ctrl = 0;
+
+ len += 24;
+
+ /* ...next IE... */
+ pos = &frame->u.probe_req.variable[0];
+
+ /* fill in our SSID IE */
+ left -= ssid_len + 2;
+ if (left < 0)
+ return 0;
+ *pos++ = WLAN_EID_SSID;
+ *pos++ = ssid_len;
+ if (ssid && ssid_len) {
+ memcpy(pos, ssid, ssid_len);
+ pos += ssid_len;
+ }
+
+ len += ssid_len + 2;
+
+ if (WARN_ON(left < ie_len))
+ return len;
+
+ if (ies && ie_len) {
+ memcpy(pos, ies, ie_len);
+ len += ie_len;
+ }
+
+ return (u16)len;
+}
+
+static int iwlagn_request_scan(struct iwl_priv *priv, struct ieee80211_vif *vif)
+{
+ struct iwl_host_cmd cmd = {
+ .id = REPLY_SCAN_CMD,
+ .len = { sizeof(struct iwl_scan_cmd), },
+ };
+ struct iwl_scan_cmd *scan;
+ struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
+ u32 rate_flags = 0;
+ u16 cmd_len = 0;
+ u16 rx_chain = 0;
+ enum nl80211_band band;
+ u8 n_probes = 0;
+ u8 rx_ant = priv->nvm_data->valid_rx_ant;
+ u8 rate;
+ bool is_active = false;
+ int chan_mod;
+ u8 active_chains;
+ u8 scan_tx_antennas = priv->nvm_data->valid_tx_ant;
+ int ret;
+ size_t scan_cmd_size = sizeof(struct iwl_scan_cmd) +
+ MAX_SCAN_CHANNEL * sizeof(struct iwl_scan_channel) +
+ priv->fw->ucode_capa.max_probe_length;
+ const u8 *ssid = NULL;
+ u8 ssid_len = 0;
+
+ if (WARN_ON(priv->scan_type == IWL_SCAN_NORMAL &&
+ (!priv->scan_request ||
+ priv->scan_request->n_channels > MAX_SCAN_CHANNEL)))
+ return -EINVAL;
+
+ lockdep_assert_held(&priv->mutex);
+
+ if (vif)
+ ctx = iwl_rxon_ctx_from_vif(vif);
+
+ if (!priv->scan_cmd) {
+ priv->scan_cmd = kmalloc(scan_cmd_size, GFP_KERNEL);
+ if (!priv->scan_cmd) {
+ IWL_DEBUG_SCAN(priv,
+ "fail to allocate memory for scan\n");
+ return -ENOMEM;
+ }
+ priv->scan_cmd_size = scan_cmd_size;
+ }
+ if (priv->scan_cmd_size < scan_cmd_size) {
+ IWL_DEBUG_SCAN(priv,
+ "memory needed for scan grew unexpectedly\n");
+ return -ENOMEM;
+ }
+ scan = priv->scan_cmd;
+ memset(scan, 0, priv->scan_cmd_size);
+
+ scan->quiet_plcp_th = IWL_PLCP_QUIET_THRESH;
+ scan->quiet_time = IWL_ACTIVE_QUIET_TIME;
+
+ if (iwl_is_any_associated(priv)) {
+ u16 interval = 0;
+ u32 extra;
+ u32 suspend_time = 100;
+ u32 scan_suspend_time = 100;
+
+ IWL_DEBUG_INFO(priv, "Scanning while associated...\n");
+ switch (priv->scan_type) {
+ case IWL_SCAN_RADIO_RESET:
+ interval = 0;
+ break;
+ case IWL_SCAN_NORMAL:
+ interval = vif->bss_conf.beacon_int;
+ break;
+ }
+
+ scan->suspend_time = 0;
+ scan->max_out_time = cpu_to_le32(200 * 1024);
+ if (!interval)
+ interval = suspend_time;
+
+ extra = (suspend_time / interval) << 22;
+ scan_suspend_time = (extra |
+ ((suspend_time % interval) * 1024));
+ scan->suspend_time = cpu_to_le32(scan_suspend_time);
+ IWL_DEBUG_SCAN(priv, "suspend_time 0x%X beacon interval %d\n",
+ scan_suspend_time, interval);
+ }
+
+ switch (priv->scan_type) {
+ case IWL_SCAN_RADIO_RESET:
+ IWL_DEBUG_SCAN(priv, "Start internal passive scan.\n");
+ /*
+ * Override quiet time as firmware checks that active
+ * dwell is >= quiet; since we use passive scan it'll
+ * not actually be used.
+ */
+ scan->quiet_time = cpu_to_le16(IWL_RADIO_RESET_DWELL_TIME);
+ break;
+ case IWL_SCAN_NORMAL:
+ if (priv->scan_request->n_ssids) {
+ int i, p = 0;
+ IWL_DEBUG_SCAN(priv, "Kicking off active scan\n");
+ /*
+ * The highest priority SSID is inserted to the
+ * probe request template.
+ */
+ ssid_len = priv->scan_request->ssids[0].ssid_len;
+ ssid = priv->scan_request->ssids[0].ssid;
+
+ /*
+ * Invert the order of ssids, the firmware will invert
+ * it back.
+ */
+ for (i = priv->scan_request->n_ssids - 1; i >= 1; i--) {
+ scan->direct_scan[p].id = WLAN_EID_SSID;
+ scan->direct_scan[p].len =
+ priv->scan_request->ssids[i].ssid_len;
+ memcpy(scan->direct_scan[p].ssid,
+ priv->scan_request->ssids[i].ssid,
+ priv->scan_request->ssids[i].ssid_len);
+ n_probes++;
+ p++;
+ }
+ is_active = true;
+ } else
+ IWL_DEBUG_SCAN(priv, "Start passive scan.\n");
+ break;
+ }
+
+ scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK;
+ scan->tx_cmd.sta_id = ctx->bcast_sta_id;
+ scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
+
+ switch (priv->scan_band) {
+ case NL80211_BAND_2GHZ:
+ scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK;
+ chan_mod = le32_to_cpu(
+ priv->contexts[IWL_RXON_CTX_BSS].active.flags &
+ RXON_FLG_CHANNEL_MODE_MSK)
+ >> RXON_FLG_CHANNEL_MODE_POS;
+ if ((priv->scan_request && priv->scan_request->no_cck) ||
+ chan_mod == CHANNEL_MODE_PURE_40) {
+ rate = IWL_RATE_6M_PLCP;
+ } else {
+ rate = IWL_RATE_1M_PLCP;
+ rate_flags = RATE_MCS_CCK_MSK;
+ }
+ /*
+ * Internal scans are passive, so we can indiscriminately set
+ * the BT ignore flag on 2.4 GHz since it applies to TX only.
+ */
+ if (priv->lib->bt_params &&
+ priv->lib->bt_params->advanced_bt_coexist)
+ scan->tx_cmd.tx_flags |= TX_CMD_FLG_IGNORE_BT;
+ break;
+ case NL80211_BAND_5GHZ:
+ rate = IWL_RATE_6M_PLCP;
+ break;
+ default:
+ IWL_WARN(priv, "Invalid scan band\n");
+ return -EIO;
+ }
+
+ /*
+ * If active scanning is requested but a certain channel is
+ * marked passive, we can do active scanning if we detect
+ * transmissions.
+ *
+ * There is an issue with some firmware versions that triggers
+ * a sysassert on a "good CRC threshold" of zero (== disabled),
+ * on a radar channel even though this means that we should NOT
+ * send probes.
+ *
+ * The "good CRC threshold" is the number of frames that we
+ * need to receive during our dwell time on a channel before
+ * sending out probes -- setting this to a huge value will
+ * mean we never reach it, but at the same time work around
+ * the aforementioned issue. Thus use IWL_GOOD_CRC_TH_NEVER
+ * here instead of IWL_GOOD_CRC_TH_DISABLED.
+ *
+ * This was fixed in later versions along with some other
+ * scan changes, and the threshold behaves as a flag in those
+ * versions.
+ */
+ if (priv->new_scan_threshold_behaviour)
+ scan->good_CRC_th = is_active ? IWL_GOOD_CRC_TH_DEFAULT :
+ IWL_GOOD_CRC_TH_DISABLED;
+ else
+ scan->good_CRC_th = is_active ? IWL_GOOD_CRC_TH_DEFAULT :
+ IWL_GOOD_CRC_TH_NEVER;
+
+ band = priv->scan_band;
+
+ if (band == NL80211_BAND_2GHZ &&
+ priv->lib->bt_params &&
+ priv->lib->bt_params->advanced_bt_coexist) {
+ /* transmit 2.4 GHz probes only on first antenna */
+ scan_tx_antennas = first_antenna(scan_tx_antennas);
+ }
+
+ priv->scan_tx_ant[band] = iwl_toggle_tx_ant(priv,
+ priv->scan_tx_ant[band],
+ scan_tx_antennas);
+ rate_flags |= iwl_ant_idx_to_flags(priv->scan_tx_ant[band]);
+ scan->tx_cmd.rate_n_flags = iwl_hw_set_rate_n_flags(rate, rate_flags);
+
+ /*
+ * In power save mode while associated use one chain,
+ * otherwise use all chains
+ */
+ if (test_bit(STATUS_POWER_PMI, &priv->status) &&
+ !(priv->hw->conf.flags & IEEE80211_CONF_IDLE)) {
+ /* rx_ant has been set to all valid chains previously */
+ active_chains = rx_ant &
+ ((u8)(priv->chain_noise_data.active_chains));
+ if (!active_chains)
+ active_chains = rx_ant;
+
+ IWL_DEBUG_SCAN(priv, "chain_noise_data.active_chains: %u\n",
+ priv->chain_noise_data.active_chains);
+
+ rx_ant = first_antenna(active_chains);
+ }
+ if (priv->lib->bt_params &&
+ priv->lib->bt_params->advanced_bt_coexist &&
+ priv->bt_full_concurrent) {
+ /* operated as 1x1 in full concurrency mode */
+ rx_ant = first_antenna(rx_ant);
+ }
+
+ /* MIMO is not used here, but value is required */
+ rx_chain |=
+ priv->nvm_data->valid_rx_ant << RXON_RX_CHAIN_VALID_POS;
+ rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS;
+ rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_SEL_POS;
+ rx_chain |= 0x1 << RXON_RX_CHAIN_DRIVER_FORCE_POS;
+ scan->rx_chain = cpu_to_le16(rx_chain);
+ switch (priv->scan_type) {
+ case IWL_SCAN_NORMAL:
+ cmd_len = iwl_fill_probe_req(
+ (struct ieee80211_mgmt *)scan->data,
+ vif->addr,
+ priv->scan_request->ie,
+ priv->scan_request->ie_len,
+ ssid, ssid_len,
+ scan_cmd_size - sizeof(*scan));
+ break;
+ case IWL_SCAN_RADIO_RESET:
+ /* use bcast addr, will not be transmitted but must be valid */
+ cmd_len = iwl_fill_probe_req(
+ (struct ieee80211_mgmt *)scan->data,
+ iwl_bcast_addr, NULL, 0,
+ NULL, 0,
+ scan_cmd_size - sizeof(*scan));
+ break;
+ default:
+ BUG();
+ }
+ scan->tx_cmd.len = cpu_to_le16(cmd_len);
+
+ scan->filter_flags |= (RXON_FILTER_ACCEPT_GRP_MSK |
+ RXON_FILTER_BCON_AWARE_MSK);
+
+ switch (priv->scan_type) {
+ case IWL_SCAN_RADIO_RESET:
+ scan->channel_count =
+ iwl_get_channel_for_reset_scan(priv, vif, band,
+ (void *)&scan->data[cmd_len]);
+ break;
+ case IWL_SCAN_NORMAL:
+ scan->channel_count =
+ iwl_get_channels_for_scan(priv, vif, band,
+ is_active, n_probes,
+ (void *)&scan->data[cmd_len]);
+ break;
+ }
+
+ if (scan->channel_count == 0) {
+ IWL_DEBUG_SCAN(priv, "channel count %d\n", scan->channel_count);
+ return -EIO;
+ }
+
+ cmd.len[0] += le16_to_cpu(scan->tx_cmd.len) +
+ scan->channel_count * sizeof(struct iwl_scan_channel);
+ cmd.data[0] = scan;
+ cmd.dataflags[0] = IWL_HCMD_DFL_NOCOPY;
+ scan->len = cpu_to_le16(cmd.len[0]);
+
+ /* set scan bit here for PAN params */
+ set_bit(STATUS_SCAN_HW, &priv->status);
+
+ ret = iwlagn_set_pan_params(priv);
+ if (ret) {
+ clear_bit(STATUS_SCAN_HW, &priv->status);
+ return ret;
+ }
+
+ ret = iwl_dvm_send_cmd(priv, &cmd);
+ if (ret) {
+ clear_bit(STATUS_SCAN_HW, &priv->status);
+ iwlagn_set_pan_params(priv);
+ }
+
+ return ret;
+}
+
+void iwl_init_scan_params(struct iwl_priv *priv)
+{
+ u8 ant_idx = fls(priv->nvm_data->valid_tx_ant) - 1;
+ if (!priv->scan_tx_ant[NL80211_BAND_5GHZ])
+ priv->scan_tx_ant[NL80211_BAND_5GHZ] = ant_idx;
+ if (!priv->scan_tx_ant[NL80211_BAND_2GHZ])
+ priv->scan_tx_ant[NL80211_BAND_2GHZ] = ant_idx;
+}
+
+int __must_check iwl_scan_initiate(struct iwl_priv *priv,
+ struct ieee80211_vif *vif,
+ enum iwl_scan_type scan_type,
+ enum nl80211_band band)
+{
+ int ret;
+
+ lockdep_assert_held(&priv->mutex);
+
+ cancel_delayed_work(&priv->scan_check);
+
+ if (!iwl_is_ready_rf(priv)) {
+ IWL_WARN(priv, "Request scan called when driver not ready.\n");
+ return -EIO;
+ }
+
+ if (test_bit(STATUS_SCAN_HW, &priv->status)) {
+ IWL_DEBUG_SCAN(priv,
+ "Multiple concurrent scan requests in parallel.\n");
+ return -EBUSY;
+ }
+
+ if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
+ IWL_DEBUG_SCAN(priv, "Scan request while abort pending.\n");
+ return -EBUSY;
+ }
+
+ IWL_DEBUG_SCAN(priv, "Starting %sscan...\n",
+ scan_type == IWL_SCAN_NORMAL ? "" :
+ "internal short ");
+
+ set_bit(STATUS_SCANNING, &priv->status);
+ priv->scan_type = scan_type;
+ priv->scan_start = jiffies;
+ priv->scan_band = band;
+
+ ret = iwlagn_request_scan(priv, vif);
+ if (ret) {
+ clear_bit(STATUS_SCANNING, &priv->status);
+ priv->scan_type = IWL_SCAN_NORMAL;
+ return ret;
+ }
+
+ queue_delayed_work(priv->workqueue, &priv->scan_check,
+ IWL_SCAN_CHECK_WATCHDOG);
+
+ return 0;
+}
+
+
+/*
+ * internal short scan, this function should only been called while associated.
+ * It will reset and tune the radio to prevent possible RF related problem
+ */
+void iwl_internal_short_hw_scan(struct iwl_priv *priv)
+{
+ queue_work(priv->workqueue, &priv->start_internal_scan);
+}
+
+static void iwl_bg_start_internal_scan(struct work_struct *work)
+{
+ struct iwl_priv *priv =
+ container_of(work, struct iwl_priv, start_internal_scan);
+
+ IWL_DEBUG_SCAN(priv, "Start internal scan\n");
+
+ mutex_lock(&priv->mutex);
+
+ if (priv->scan_type == IWL_SCAN_RADIO_RESET) {
+ IWL_DEBUG_SCAN(priv, "Internal scan already in progress\n");
+ goto unlock;
+ }
+
+ if (test_bit(STATUS_SCANNING, &priv->status)) {
+ IWL_DEBUG_SCAN(priv, "Scan already in progress.\n");
+ goto unlock;
+ }
+
+ if (iwl_scan_initiate(priv, NULL, IWL_SCAN_RADIO_RESET, priv->band))
+ IWL_DEBUG_SCAN(priv, "failed to start internal short scan\n");
+ unlock:
+ mutex_unlock(&priv->mutex);
+}
+
+static void iwl_bg_scan_check(struct work_struct *data)
+{
+ struct iwl_priv *priv =
+ container_of(data, struct iwl_priv, scan_check.work);
+
+ IWL_DEBUG_SCAN(priv, "Scan check work\n");
+
+ /* Since we are here firmware does not finish scan and
+ * most likely is in bad shape, so we don't bother to
+ * send abort command, just force scan complete to mac80211 */
+ mutex_lock(&priv->mutex);
+ iwl_force_scan_end(priv);
+ mutex_unlock(&priv->mutex);
+}
+
+static void iwl_bg_abort_scan(struct work_struct *work)
+{
+ struct iwl_priv *priv = container_of(work, struct iwl_priv, abort_scan);
+
+ IWL_DEBUG_SCAN(priv, "Abort scan work\n");
+
+ /* We keep scan_check work queued in case when firmware will not
+ * report back scan completed notification */
+ mutex_lock(&priv->mutex);
+ iwl_scan_cancel_timeout(priv, 200);
+ mutex_unlock(&priv->mutex);
+}
+
+static void iwl_bg_scan_completed(struct work_struct *work)
+{
+ struct iwl_priv *priv =
+ container_of(work, struct iwl_priv, scan_completed);
+
+ mutex_lock(&priv->mutex);
+ iwl_process_scan_complete(priv);
+ mutex_unlock(&priv->mutex);
+}
+
+void iwl_setup_scan_deferred_work(struct iwl_priv *priv)
+{
+ INIT_WORK(&priv->scan_completed, iwl_bg_scan_completed);
+ INIT_WORK(&priv->abort_scan, iwl_bg_abort_scan);
+ INIT_WORK(&priv->start_internal_scan, iwl_bg_start_internal_scan);
+ INIT_DELAYED_WORK(&priv->scan_check, iwl_bg_scan_check);
+}
+
+void iwl_cancel_scan_deferred_work(struct iwl_priv *priv)
+{
+ cancel_work_sync(&priv->start_internal_scan);
+ cancel_work_sync(&priv->abort_scan);
+ cancel_work_sync(&priv->scan_completed);
+
+ if (cancel_delayed_work_sync(&priv->scan_check)) {
+ mutex_lock(&priv->mutex);
+ iwl_force_scan_end(priv);
+ mutex_unlock(&priv->mutex);
+ }
+}