diff options
Diffstat (limited to 'drivers/net/wireless/intel/iwlwifi/fw/api/location.h')
| -rw-r--r-- | drivers/net/wireless/intel/iwlwifi/fw/api/location.h | 1700 |
1 files changed, 1700 insertions, 0 deletions
diff --git a/drivers/net/wireless/intel/iwlwifi/fw/api/location.h b/drivers/net/wireless/intel/iwlwifi/fw/api/location.h new file mode 100644 index 000000000..b044990c7 --- /dev/null +++ b/drivers/net/wireless/intel/iwlwifi/fw/api/location.h @@ -0,0 +1,1700 @@ +/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */ +/* + * Copyright (C) 2015-2017 Intel Deutschland GmbH + * Copyright (C) 2018-2022 Intel Corporation + */ +#ifndef __iwl_fw_api_location_h__ +#define __iwl_fw_api_location_h__ + +/** + * enum iwl_location_subcmd_ids - location group command IDs + */ +enum iwl_location_subcmd_ids { + /** + * @TOF_RANGE_REQ_CMD: TOF ranging request, + * uses one of &struct iwl_tof_range_req_cmd_v5, + * &struct iwl_tof_range_req_cmd_v7, + * &struct iwl_tof_range_req_cmd_v8, + * &struct iwl_tof_range_req_cmd_v9, + * &struct iwl_tof_range_req_cmd_v11, + * &struct iwl_tof_range_req_cmd_v7 + */ + TOF_RANGE_REQ_CMD = 0x0, + /** + * @TOF_CONFIG_CMD: TOF configuration, uses &struct iwl_tof_config_cmd + */ + TOF_CONFIG_CMD = 0x1, + /** + * @TOF_RANGE_ABORT_CMD: abort ongoing ranging, uses + * &struct iwl_tof_range_abort_cmd + */ + TOF_RANGE_ABORT_CMD = 0x2, + /** + * @TOF_RANGE_REQ_EXT_CMD: TOF extended ranging config, + * uses &struct iwl_tof_range_req_ext_cmd + */ + TOF_RANGE_REQ_EXT_CMD = 0x3, + /** + * @TOF_RESPONDER_CONFIG_CMD: FTM responder configuration, one of + * &struct iwl_tof_responder_config_cmd_v6, + * &struct iwl_tof_responder_config_cmd_v7, + * &struct iwl_tof_responder_config_cmd_v8 or + * &struct iwl_tof_responder_config_cmd_v9 + */ + TOF_RESPONDER_CONFIG_CMD = 0x4, + /** + * @TOF_RESPONDER_DYN_CONFIG_CMD: FTM dynamic configuration, + * uses &struct iwl_tof_responder_dyn_config_cmd + */ + TOF_RESPONDER_DYN_CONFIG_CMD = 0x5, + /** + * @CSI_HEADER_NOTIFICATION: CSI header + */ + CSI_HEADER_NOTIFICATION = 0xFA, + /** + * @CSI_CHUNKS_NOTIFICATION: CSI chunk, + * uses &struct iwl_csi_chunk_notification + */ + CSI_CHUNKS_NOTIFICATION = 0xFB, + /** + * @TOF_LC_NOTIF: used for LCI/civic location, contains just + * the action frame + */ + TOF_LC_NOTIF = 0xFC, + /** + * @TOF_RESPONDER_STATS: FTM responder statistics notification, + * uses &struct iwl_ftm_responder_stats + */ + TOF_RESPONDER_STATS = 0xFD, + /** + * @TOF_MCSI_DEBUG_NOTIF: MCSI debug notification, uses + * &struct iwl_tof_mcsi_notif + */ + TOF_MCSI_DEBUG_NOTIF = 0xFE, + /** + * @TOF_RANGE_RESPONSE_NOTIF: ranging response, using one of + * &struct iwl_tof_range_rsp_ntfy_v5, + * &struct iwl_tof_range_rsp_ntfy_v6, + * &struct iwl_tof_range_rsp_ntfy_v7 or + * &struct iwl_tof_range_rsp_ntfy_v8 + */ + TOF_RANGE_RESPONSE_NOTIF = 0xFF, +}; + +/** + * struct iwl_tof_config_cmd - ToF configuration + * @tof_disabled: indicates if ToF is disabled (or not) + * @one_sided_disabled: indicates if one-sided is disabled (or not) + * @is_debug_mode: indiciates if debug mode is active + * @is_buf_required: indicates if channel estimation buffer is required + */ +struct iwl_tof_config_cmd { + u8 tof_disabled; + u8 one_sided_disabled; + u8 is_debug_mode; + u8 is_buf_required; +} __packed; + +/** + * enum iwl_tof_bandwidth - values for iwl_tof_range_req_ap_entry.bandwidth + * @IWL_TOF_BW_20_LEGACY: 20 MHz non-HT + * @IWL_TOF_BW_20_HT: 20 MHz HT + * @IWL_TOF_BW_40: 40 MHz + * @IWL_TOF_BW_80: 80 MHz + * @IWL_TOF_BW_160: 160 MHz + * @IWL_TOF_BW_NUM: number of tof bandwidths + */ +enum iwl_tof_bandwidth { + IWL_TOF_BW_20_LEGACY, + IWL_TOF_BW_20_HT, + IWL_TOF_BW_40, + IWL_TOF_BW_80, + IWL_TOF_BW_160, + IWL_TOF_BW_NUM, +}; /* LOCAT_BW_TYPE_E */ + +/* + * enum iwl_tof_algo_type - Algorithym type for range measurement request + */ +enum iwl_tof_algo_type { + IWL_TOF_ALGO_TYPE_MAX_LIKE = 0, + IWL_TOF_ALGO_TYPE_LINEAR_REG = 1, + IWL_TOF_ALGO_TYPE_FFT = 2, + + /* Keep last */ + IWL_TOF_ALGO_TYPE_INVALID, +}; /* ALGO_TYPE_E */ + +/* + * enum iwl_tof_mcsi_ntfy - Enable/Disable MCSI notifications + */ +enum iwl_tof_mcsi_enable { + IWL_TOF_MCSI_DISABLED = 0, + IWL_TOF_MCSI_ENABLED = 1, +}; /* MCSI_ENABLE_E */ + +/** + * enum iwl_tof_responder_cmd_valid_field - valid fields in the responder cfg + * @IWL_TOF_RESPONDER_CMD_VALID_CHAN_INFO: channel info is valid + * @IWL_TOF_RESPONDER_CMD_VALID_TOA_OFFSET: ToA offset is valid + * @IWL_TOF_RESPONDER_CMD_VALID_COMMON_CALIB: common calibration mode is valid + * @IWL_TOF_RESPONDER_CMD_VALID_SPECIFIC_CALIB: spefici calibration mode is + * valid + * @IWL_TOF_RESPONDER_CMD_VALID_BSSID: BSSID is valid + * @IWL_TOF_RESPONDER_CMD_VALID_TX_ANT: TX antenna is valid + * @IWL_TOF_RESPONDER_CMD_VALID_ALGO_TYPE: algorithm type is valid + * @IWL_TOF_RESPONDER_CMD_VALID_NON_ASAP_SUPPORT: non-ASAP support is valid + * @IWL_TOF_RESPONDER_CMD_VALID_STATISTICS_REPORT_SUPPORT: statistics report + * support is valid + * @IWL_TOF_RESPONDER_CMD_VALID_MCSI_NOTIF_SUPPORT: MCSI notification support + * is valid + * @IWL_TOF_RESPONDER_CMD_VALID_FAST_ALGO_SUPPORT: fast algorithm support + * is valid + * @IWL_TOF_RESPONDER_CMD_VALID_RETRY_ON_ALGO_FAIL: retry on algorithm failure + * is valid + * @IWL_TOF_RESPONDER_CMD_VALID_STA_ID: station ID is valid + * @IWL_TOF_RESPONDER_CMD_VALID_NDP_SUPPORT: enable/disable NDP ranging support + * is valid + * @IWL_TOF_RESPONDER_CMD_VALID_NDP_PARAMS: NDP parameters are valid + * @IWL_TOF_RESPONDER_CMD_VALID_LMR_FEEDBACK: LMR feedback support is valid + * @IWL_TOF_RESPONDER_CMD_VALID_SESSION_ID: session id flag is valid + * @IWL_TOF_RESPONDER_CMD_VALID_BSS_COLOR: the bss_color field is valid + * @IWL_TOF_RESPONDER_CMD_VALID_MIN_MAX_TIME_BETWEEN_MSR: the + * min_time_between_msr and max_time_between_msr fields are valid + */ +enum iwl_tof_responder_cmd_valid_field { + IWL_TOF_RESPONDER_CMD_VALID_CHAN_INFO = BIT(0), + IWL_TOF_RESPONDER_CMD_VALID_TOA_OFFSET = BIT(1), + IWL_TOF_RESPONDER_CMD_VALID_COMMON_CALIB = BIT(2), + IWL_TOF_RESPONDER_CMD_VALID_SPECIFIC_CALIB = BIT(3), + IWL_TOF_RESPONDER_CMD_VALID_BSSID = BIT(4), + IWL_TOF_RESPONDER_CMD_VALID_TX_ANT = BIT(5), + IWL_TOF_RESPONDER_CMD_VALID_ALGO_TYPE = BIT(6), + IWL_TOF_RESPONDER_CMD_VALID_NON_ASAP_SUPPORT = BIT(7), + IWL_TOF_RESPONDER_CMD_VALID_STATISTICS_REPORT_SUPPORT = BIT(8), + IWL_TOF_RESPONDER_CMD_VALID_MCSI_NOTIF_SUPPORT = BIT(9), + IWL_TOF_RESPONDER_CMD_VALID_FAST_ALGO_SUPPORT = BIT(10), + IWL_TOF_RESPONDER_CMD_VALID_RETRY_ON_ALGO_FAIL = BIT(11), + IWL_TOF_RESPONDER_CMD_VALID_STA_ID = BIT(12), + IWL_TOF_RESPONDER_CMD_VALID_NDP_SUPPORT = BIT(22), + IWL_TOF_RESPONDER_CMD_VALID_NDP_PARAMS = BIT(23), + IWL_TOF_RESPONDER_CMD_VALID_LMR_FEEDBACK = BIT(24), + IWL_TOF_RESPONDER_CMD_VALID_SESSION_ID = BIT(25), + IWL_TOF_RESPONDER_CMD_VALID_BSS_COLOR = BIT(26), + IWL_TOF_RESPONDER_CMD_VALID_MIN_MAX_TIME_BETWEEN_MSR = BIT(27), +}; + +/** + * enum iwl_tof_responder_cfg_flags - responder configuration flags + * @IWL_TOF_RESPONDER_FLAGS_NON_ASAP_SUPPORT: non-ASAP support + * @IWL_TOF_RESPONDER_FLAGS_REPORT_STATISTICS: report statistics + * @IWL_TOF_RESPONDER_FLAGS_REPORT_MCSI: report MCSI + * @IWL_TOF_RESPONDER_FLAGS_ALGO_TYPE: algorithm type + * @IWL_TOF_RESPONDER_FLAGS_TOA_OFFSET_MODE: ToA offset mode + * @IWL_TOF_RESPONDER_FLAGS_COMMON_CALIB_MODE: common calibration mode + * @IWL_TOF_RESPONDER_FLAGS_SPECIFIC_CALIB_MODE: specific calibration mode + * @IWL_TOF_RESPONDER_FLAGS_FAST_ALGO_SUPPORT: fast algorithm support + * @IWL_TOF_RESPONDER_FLAGS_RETRY_ON_ALGO_FAIL: retry on algorithm fail + * @IWL_TOF_RESPONDER_FLAGS_FTM_TX_ANT: TX antenna mask + * @IWL_TOF_RESPONDER_FLAGS_NDP_SUPPORT: support NDP ranging + * @IWL_TOF_RESPONDER_FLAGS_LMR_FEEDBACK: request for LMR feedback if the + * initiator supports it + * @IWL_TOF_RESPONDER_FLAGS_SESSION_ID: send the session id in the initial FTM + * frame. + */ +enum iwl_tof_responder_cfg_flags { + IWL_TOF_RESPONDER_FLAGS_NON_ASAP_SUPPORT = BIT(0), + IWL_TOF_RESPONDER_FLAGS_REPORT_STATISTICS = BIT(1), + IWL_TOF_RESPONDER_FLAGS_REPORT_MCSI = BIT(2), + IWL_TOF_RESPONDER_FLAGS_ALGO_TYPE = BIT(3) | BIT(4) | BIT(5), + IWL_TOF_RESPONDER_FLAGS_TOA_OFFSET_MODE = BIT(6), + IWL_TOF_RESPONDER_FLAGS_COMMON_CALIB_MODE = BIT(7), + IWL_TOF_RESPONDER_FLAGS_SPECIFIC_CALIB_MODE = BIT(8), + IWL_TOF_RESPONDER_FLAGS_FAST_ALGO_SUPPORT = BIT(9), + IWL_TOF_RESPONDER_FLAGS_RETRY_ON_ALGO_FAIL = BIT(10), + IWL_TOF_RESPONDER_FLAGS_FTM_TX_ANT = RATE_MCS_ANT_AB_MSK, + IWL_TOF_RESPONDER_FLAGS_NDP_SUPPORT = BIT(24), + IWL_TOF_RESPONDER_FLAGS_LMR_FEEDBACK = BIT(25), + IWL_TOF_RESPONDER_FLAGS_SESSION_ID = BIT(27), +}; + +/** + * struct iwl_tof_responder_config_cmd_v6 - ToF AP mode (for debug) + * @cmd_valid_fields: &iwl_tof_responder_cmd_valid_field + * @responder_cfg_flags: &iwl_tof_responder_cfg_flags + * @bandwidth: current AP Bandwidth: &enum iwl_tof_bandwidth + * @rate: current AP rate + * @channel_num: current AP Channel + * @ctrl_ch_position: coding of the control channel position relative to + * the center frequency, see iwl_mvm_get_ctrl_pos() + * @sta_id: index of the AP STA when in AP mode + * @reserved1: reserved + * @toa_offset: Artificial addition [pSec] for the ToA - to be used for debug + * purposes, simulating station movement by adding various values + * to this field + * @common_calib: XVT: common calibration value + * @specific_calib: XVT: specific calibration value + * @bssid: Current AP BSSID + * @reserved2: reserved + */ +struct iwl_tof_responder_config_cmd_v6 { + __le32 cmd_valid_fields; + __le32 responder_cfg_flags; + u8 bandwidth; + u8 rate; + u8 channel_num; + u8 ctrl_ch_position; + u8 sta_id; + u8 reserved1; + __le16 toa_offset; + __le16 common_calib; + __le16 specific_calib; + u8 bssid[ETH_ALEN]; + __le16 reserved2; +} __packed; /* TOF_RESPONDER_CONFIG_CMD_API_S_VER_6 */ + +/** + * struct iwl_tof_responder_config_cmd_v7 - ToF AP mode (for debug) + * @cmd_valid_fields: &iwl_tof_responder_cmd_valid_field + * @responder_cfg_flags: &iwl_tof_responder_cfg_flags + * @format_bw: bits 0 - 3: &enum iwl_location_frame_format. + * bits 4 - 7: &enum iwl_location_bw. + * @rate: current AP rate + * @channel_num: current AP Channel + * @ctrl_ch_position: coding of the control channel position relative to + * the center frequency, see iwl_mvm_get_ctrl_pos() + * @sta_id: index of the AP STA when in AP mode + * @reserved1: reserved + * @toa_offset: Artificial addition [pSec] for the ToA - to be used for debug + * purposes, simulating station movement by adding various values + * to this field + * @common_calib: XVT: common calibration value + * @specific_calib: XVT: specific calibration value + * @bssid: Current AP BSSID + * @reserved2: reserved + */ +struct iwl_tof_responder_config_cmd_v7 { + __le32 cmd_valid_fields; + __le32 responder_cfg_flags; + u8 format_bw; + u8 rate; + u8 channel_num; + u8 ctrl_ch_position; + u8 sta_id; + u8 reserved1; + __le16 toa_offset; + __le16 common_calib; + __le16 specific_calib; + u8 bssid[ETH_ALEN]; + __le16 reserved2; +} __packed; /* TOF_RESPONDER_CONFIG_CMD_API_S_VER_7 */ + +#define IWL_RESPONDER_STS_POS 3 +#define IWL_RESPONDER_TOTAL_LTF_POS 6 + +/** + * struct iwl_tof_responder_config_cmd_v8 - ToF AP mode (for debug) + * @cmd_valid_fields: &iwl_tof_responder_cmd_valid_field + * @responder_cfg_flags: &iwl_tof_responder_cfg_flags + * @format_bw: bits 0 - 3: &enum iwl_location_frame_format. + * bits 4 - 7: &enum iwl_location_bw. + * @rate: current AP rate + * @channel_num: current AP Channel + * @ctrl_ch_position: coding of the control channel position relative to + * the center frequency, see iwl_mvm_get_ctrl_pos() + * @sta_id: index of the AP STA when in AP mode + * @reserved1: reserved + * @toa_offset: Artificial addition [pSec] for the ToA - to be used for debug + * purposes, simulating station movement by adding various values + * to this field + * @common_calib: XVT: common calibration value + * @specific_calib: XVT: specific calibration value + * @bssid: Current AP BSSID + * @r2i_ndp_params: parameters for R2I NDP. + * bits 0 - 2: max number of LTF repetitions + * bits 3 - 5: max number of spatial streams (supported values are < 2) + * bits 6 - 7: max number of total LTFs see + * &enum ieee80211_range_params_max_total_ltf + * @i2r_ndp_params: parameters for I2R NDP. + * bits 0 - 2: max number of LTF repetitions + * bits 3 - 5: max number of spatial streams + * bits 6 - 7: max number of total LTFs see + * &enum ieee80211_range_params_max_total_ltf + */ +struct iwl_tof_responder_config_cmd_v8 { + __le32 cmd_valid_fields; + __le32 responder_cfg_flags; + u8 format_bw; + u8 rate; + u8 channel_num; + u8 ctrl_ch_position; + u8 sta_id; + u8 reserved1; + __le16 toa_offset; + __le16 common_calib; + __le16 specific_calib; + u8 bssid[ETH_ALEN]; + u8 r2i_ndp_params; + u8 i2r_ndp_params; +} __packed; /* TOF_RESPONDER_CONFIG_CMD_API_S_VER_8 */ + +/** + * struct iwl_tof_responder_config_cmd_v9 - ToF AP mode (for debug) + * @cmd_valid_fields: &iwl_tof_responder_cmd_valid_field + * @responder_cfg_flags: &iwl_tof_responder_cfg_flags + * @format_bw: bits 0 - 3: &enum iwl_location_frame_format. + * bits 4 - 7: &enum iwl_location_bw. + * @bss_color: current AP bss_color + * @channel_num: current AP Channel + * @ctrl_ch_position: coding of the control channel position relative to + * the center frequency, see iwl_mvm_get_ctrl_pos() + * @sta_id: index of the AP STA when in AP mode + * @reserved1: reserved + * @toa_offset: Artificial addition [pSec] for the ToA - to be used for debug + * purposes, simulating station movement by adding various values + * to this field + * @common_calib: XVT: common calibration value + * @specific_calib: XVT: specific calibration value + * @bssid: Current AP BSSID + * @r2i_ndp_params: parameters for R2I NDP. + * bits 0 - 2: max number of LTF repetitions + * bits 3 - 5: max number of spatial streams (supported values are < 2) + * bits 6 - 7: max number of total LTFs see + * &enum ieee80211_range_params_max_total_ltf + * @i2r_ndp_params: parameters for I2R NDP. + * bits 0 - 2: max number of LTF repetitions + * bits 3 - 5: max number of spatial streams + * bits 6 - 7: max number of total LTFs see + * &enum ieee80211_range_params_max_total_ltf + * @min_time_between_msr: for non trigger based NDP ranging, minimum time + * between measurements in milliseconds. + * @max_time_between_msr: for non trigger based NDP ranging, maximum time + * between measurements in milliseconds. + */ +struct iwl_tof_responder_config_cmd_v9 { + __le32 cmd_valid_fields; + __le32 responder_cfg_flags; + u8 format_bw; + u8 bss_color; + u8 channel_num; + u8 ctrl_ch_position; + u8 sta_id; + u8 reserved1; + __le16 toa_offset; + __le16 common_calib; + __le16 specific_calib; + u8 bssid[ETH_ALEN]; + u8 r2i_ndp_params; + u8 i2r_ndp_params; + __le16 min_time_between_msr; + __le16 max_time_between_msr; +} __packed; /* TOF_RESPONDER_CONFIG_CMD_API_S_VER_8 */ + +#define IWL_LCI_CIVIC_IE_MAX_SIZE 400 + +/** + * struct iwl_tof_responder_dyn_config_cmd - Dynamic responder settings + * @lci_len: The length of the 1st (LCI) part in the @lci_civic buffer + * @civic_len: The length of the 2nd (CIVIC) part in the @lci_civic buffer + * @lci_civic: The LCI/CIVIC buffer. LCI data (if exists) comes first, then, if + * needed, 0-padding such that the next part is dword-aligned, then CIVIC + * data (if exists) follows, and then 0-padding again to complete a + * 4-multiple long buffer. + */ +struct iwl_tof_responder_dyn_config_cmd_v2 { + __le32 lci_len; + __le32 civic_len; + u8 lci_civic[]; +} __packed; /* TOF_RESPONDER_DYN_CONFIG_CMD_API_S_VER_2 */ + +#define IWL_LCI_MAX_SIZE 160 +#define IWL_CIVIC_MAX_SIZE 160 +#define HLTK_11AZ_LEN 32 + +/** + * enum iwl_responder_dyn_cfg_valid_flags - valid flags for dyn_config_cmd + * @IWL_RESPONDER_DYN_CFG_VALID_LCI: LCI data is valid + * @IWL_RESPONDER_DYN_CFG_VALID_CIVIC: Civic data is valid + * @IWL_RESPONDER_DYN_CFG_VALID_PASN_STA: the pasn_addr, HLTK and cipher fields + * are valid. + */ +enum iwl_responder_dyn_cfg_valid_flags { + IWL_RESPONDER_DYN_CFG_VALID_LCI = BIT(0), + IWL_RESPONDER_DYN_CFG_VALID_CIVIC = BIT(1), + IWL_RESPONDER_DYN_CFG_VALID_PASN_STA = BIT(2), +}; + +/** + * struct iwl_tof_responder_dyn_config_cmd - Dynamic responder settings + * @cipher: The negotiated cipher. see &enum iwl_location_cipher. + * @valid_flags: flags indicating which fields in the command are valid. see + * &enum iwl_responder_dyn_cfg_valid_flags. + * @lci_len: length of the LCI data in bytes + * @civic_len: length of the Civic data in bytes + * @lci_buf: the LCI buffer + * @civic_buf: the Civic buffer + * @hltk_buf: HLTK for secure LTF bits generation for the specified station + * @addr: mac address of the station for which to use the HLTK + * @reserved: for alignment + */ +struct iwl_tof_responder_dyn_config_cmd { + u8 cipher; + u8 valid_flags; + u8 lci_len; + u8 civic_len; + u8 lci_buf[IWL_LCI_MAX_SIZE]; + u8 civic_buf[IWL_LCI_MAX_SIZE]; + u8 hltk_buf[HLTK_11AZ_LEN]; + u8 addr[ETH_ALEN]; + u8 reserved[2]; +} __packed; /* TOF_RESPONDER_DYN_CONFIG_CMD_API_S_VER_3 */ + +/** + * struct iwl_tof_range_req_ext_cmd - extended range req for WLS + * @tsf_timer_offset_msec: the recommended time offset (mSec) from the AP's TSF + * @reserved: reserved + * @min_delta_ftm: Minimal time between two consecutive measurements, + * in units of 100us. 0 means no preference by station + * @ftm_format_and_bw20M: FTM Channel Spacing/Format for 20MHz: recommended + * value be sent to the AP + * @ftm_format_and_bw40M: FTM Channel Spacing/Format for 40MHz: recommended + * value to be sent to the AP + * @ftm_format_and_bw80M: FTM Channel Spacing/Format for 80MHz: recommended + * value to be sent to the AP + */ +struct iwl_tof_range_req_ext_cmd { + __le16 tsf_timer_offset_msec; + __le16 reserved; + u8 min_delta_ftm; + u8 ftm_format_and_bw20M; + u8 ftm_format_and_bw40M; + u8 ftm_format_and_bw80M; +} __packed; + +/** + * enum iwl_tof_location_query - values for query bitmap + * @IWL_TOF_LOC_LCI: query LCI + * @IWL_TOF_LOC_CIVIC: query civic + */ +enum iwl_tof_location_query { + IWL_TOF_LOC_LCI = 0x01, + IWL_TOF_LOC_CIVIC = 0x02, +}; + + /** + * struct iwl_tof_range_req_ap_entry_v2 - AP configuration parameters + * @channel_num: Current AP Channel + * @bandwidth: Current AP Bandwidth. One of iwl_tof_bandwidth. + * @tsf_delta_direction: TSF relatively to the subject AP + * @ctrl_ch_position: Coding of the control channel position relative to the + * center frequency, see iwl_mvm_get_ctrl_pos(). + * @bssid: AP's BSSID + * @measure_type: Measurement type: 0 - two sided, 1 - One sided + * @num_of_bursts: Recommended value to be sent to the AP. 2s Exponent of the + * number of measurement iterations (min 2^0 = 1, max 2^14) + * @burst_period: Recommended value to be sent to the AP. Measurement + * periodicity In units of 100ms. ignored if num_of_bursts = 0 + * @samples_per_burst: 2-sided: the number of FTMs pairs in single Burst (1-31); + * 1-sided: how many rts/cts pairs should be used per burst. + * @retries_per_sample: Max number of retries that the LMAC should send + * in case of no replies by the AP. + * @tsf_delta: TSF Delta in units of microseconds. + * The difference between the AP TSF and the device local clock. + * @location_req: Location Request Bit[0] LCI should be sent in the FTMR; + * Bit[1] Civic should be sent in the FTMR + * @asap_mode: 0 - non asap mode, 1 - asap mode (not relevant for one sided) + * @enable_dyn_ack: Enable Dynamic ACK BW. + * 0: Initiator interact with regular AP; + * 1: Initiator interact with Responder machine: need to send the + * Initiator Acks with HT 40MHz / 80MHz, since the Responder should + * use it for its ch est measurement (this flag will be set when we + * configure the opposite machine to be Responder). + * @rssi: Last received value + * legal values: -128-0 (0x7f). above 0x0 indicating an invalid value. + * @algo_type: &enum iwl_tof_algo_type + * @notify_mcsi: &enum iwl_tof_mcsi_ntfy. + * @reserved: For alignment and future use + */ +struct iwl_tof_range_req_ap_entry_v2 { + u8 channel_num; + u8 bandwidth; + u8 tsf_delta_direction; + u8 ctrl_ch_position; + u8 bssid[ETH_ALEN]; + u8 measure_type; + u8 num_of_bursts; + __le16 burst_period; + u8 samples_per_burst; + u8 retries_per_sample; + __le32 tsf_delta; + u8 location_req; + u8 asap_mode; + u8 enable_dyn_ack; + s8 rssi; + u8 algo_type; + u8 notify_mcsi; + __le16 reserved; +} __packed; /* LOCATION_RANGE_REQ_AP_ENTRY_CMD_API_S_VER_2 */ + +/** + * enum iwl_initiator_ap_flags - per responder FTM configuration flags + * @IWL_INITIATOR_AP_FLAGS_ASAP: Request for ASAP measurement. + * @IWL_INITIATOR_AP_FLAGS_LCI_REQUEST: Request for LCI information + * @IWL_INITIATOR_AP_FLAGS_CIVIC_REQUEST: Request for CIVIC information + * @IWL_INITIATOR_AP_FLAGS_DYN_ACK: Send HT/VHT ack for FTM frames. If not set, + * 20Mhz dup acks will be sent. + * @IWL_INITIATOR_AP_FLAGS_ALGO_LR: Use LR algo type for rtt calculation. + * Default algo type is ML. + * @IWL_INITIATOR_AP_FLAGS_ALGO_FFT: Use FFT algo type for rtt calculation. + * Default algo type is ML. + * @IWL_INITIATOR_AP_FLAGS_MCSI_REPORT: Send the MCSI for each FTM frame to the + * driver. + * @IWL_INITIATOR_AP_FLAGS_NON_TB: Use non trigger based flow + * @IWL_INITIATOR_AP_FLAGS_TB: Use trigger based flow + * @IWL_INITIATOR_AP_FLAGS_SECURED: request secure LTF measurement + * @IWL_INITIATOR_AP_FLAGS_LMR_FEEDBACK: Send LMR feedback + * @IWL_INITIATOR_AP_FLAGS_USE_CALIB: Use calibration values from the request + * instead of fw internal values. + * @IWL_INITIATOR_AP_FLAGS_PMF: request to protect the negotiation and LMR + * frames with protected management frames. + * @IWL_INITIATOR_AP_FLAGS_TERMINATE_ON_LMR_FEEDBACK: terminate the session if + * the responder asked for LMR feedback although the initiator did not set + * the LMR feedback bit in the FTM request. If not set, the initiator will + * continue with the session and will provide the LMR feedback. + */ +enum iwl_initiator_ap_flags { + IWL_INITIATOR_AP_FLAGS_ASAP = BIT(1), + IWL_INITIATOR_AP_FLAGS_LCI_REQUEST = BIT(2), + IWL_INITIATOR_AP_FLAGS_CIVIC_REQUEST = BIT(3), + IWL_INITIATOR_AP_FLAGS_DYN_ACK = BIT(4), + IWL_INITIATOR_AP_FLAGS_ALGO_LR = BIT(5), + IWL_INITIATOR_AP_FLAGS_ALGO_FFT = BIT(6), + IWL_INITIATOR_AP_FLAGS_MCSI_REPORT = BIT(8), + IWL_INITIATOR_AP_FLAGS_NON_TB = BIT(9), + IWL_INITIATOR_AP_FLAGS_TB = BIT(10), + IWL_INITIATOR_AP_FLAGS_SECURED = BIT(11), + IWL_INITIATOR_AP_FLAGS_LMR_FEEDBACK = BIT(12), + IWL_INITIATOR_AP_FLAGS_USE_CALIB = BIT(13), + IWL_INITIATOR_AP_FLAGS_PMF = BIT(14), + IWL_INITIATOR_AP_FLAGS_TERMINATE_ON_LMR_FEEDBACK = BIT(15), +}; + +/** + * struct iwl_tof_range_req_ap_entry_v3 - AP configuration parameters + * @initiator_ap_flags: see &enum iwl_initiator_ap_flags. + * @channel_num: AP Channel number + * @bandwidth: AP bandwidth. One of iwl_tof_bandwidth. + * @ctrl_ch_position: Coding of the control channel position relative to the + * center frequency, see iwl_mvm_get_ctrl_pos(). + * @ftmr_max_retries: Max number of retries to send the FTMR in case of no + * reply from the AP. + * @bssid: AP's BSSID + * @burst_period: Recommended value to be sent to the AP. Measurement + * periodicity In units of 100ms. ignored if num_of_bursts_exp = 0 + * @samples_per_burst: the number of FTMs pairs in single Burst (1-31); + * @num_of_bursts: Recommended value to be sent to the AP. 2s Exponent of + * the number of measurement iterations (min 2^0 = 1, max 2^14) + * @reserved: For alignment and future use + * @tsf_delta: not in use + */ +struct iwl_tof_range_req_ap_entry_v3 { + __le32 initiator_ap_flags; + u8 channel_num; + u8 bandwidth; + u8 ctrl_ch_position; + u8 ftmr_max_retries; + u8 bssid[ETH_ALEN]; + __le16 burst_period; + u8 samples_per_burst; + u8 num_of_bursts; + __le16 reserved; + __le32 tsf_delta; +} __packed; /* LOCATION_RANGE_REQ_AP_ENTRY_CMD_API_S_VER_3 */ + +/** + * enum iwl_location_frame_format - location frame formats + * @IWL_LOCATION_FRAME_FORMAT_LEGACY: legacy + * @IWL_LOCATION_FRAME_FORMAT_HT: HT + * @IWL_LOCATION_FRAME_FORMAT_VHT: VHT + * @IWL_LOCATION_FRAME_FORMAT_HE: HE + */ +enum iwl_location_frame_format { + IWL_LOCATION_FRAME_FORMAT_LEGACY, + IWL_LOCATION_FRAME_FORMAT_HT, + IWL_LOCATION_FRAME_FORMAT_VHT, + IWL_LOCATION_FRAME_FORMAT_HE, +}; + +/** + * enum iwl_location_bw - location bandwidth selection + * @IWL_LOCATION_BW_20MHZ: 20MHz + * @IWL_LOCATION_BW_40MHZ: 40MHz + * @IWL_LOCATION_BW_80MHZ: 80MHz + */ +enum iwl_location_bw { + IWL_LOCATION_BW_20MHZ, + IWL_LOCATION_BW_40MHZ, + IWL_LOCATION_BW_80MHZ, + IWL_LOCATION_BW_160MHZ, +}; + +#define TK_11AZ_LEN 32 + +#define LOCATION_BW_POS 4 + +/** + * struct iwl_tof_range_req_ap_entry_v4 - AP configuration parameters + * @initiator_ap_flags: see &enum iwl_initiator_ap_flags. + * @channel_num: AP Channel number + * @format_bw: bits 0 - 3: &enum iwl_location_frame_format. + * bits 4 - 7: &enum iwl_location_bw. + * @ctrl_ch_position: Coding of the control channel position relative to the + * center frequency, see iwl_mvm_get_ctrl_pos(). + * @ftmr_max_retries: Max number of retries to send the FTMR in case of no + * reply from the AP. + * @bssid: AP's BSSID + * @burst_period: Recommended value to be sent to the AP. Measurement + * periodicity In units of 100ms. ignored if num_of_bursts_exp = 0 + * @samples_per_burst: the number of FTMs pairs in single Burst (1-31); + * @num_of_bursts: Recommended value to be sent to the AP. 2s Exponent of + * the number of measurement iterations (min 2^0 = 1, max 2^14) + * @reserved: For alignment and future use + * @hltk: HLTK to be used for secured 11az measurement + * @tk: TK to be used for secured 11az measurement + */ +struct iwl_tof_range_req_ap_entry_v4 { + __le32 initiator_ap_flags; + u8 channel_num; + u8 format_bw; + u8 ctrl_ch_position; + u8 ftmr_max_retries; + u8 bssid[ETH_ALEN]; + __le16 burst_period; + u8 samples_per_burst; + u8 num_of_bursts; + __le16 reserved; + u8 hltk[HLTK_11AZ_LEN]; + u8 tk[TK_11AZ_LEN]; +} __packed; /* LOCATION_RANGE_REQ_AP_ENTRY_CMD_API_S_VER_4 */ + +/** + * enum iwl_location_cipher - location cipher selection + * @IWL_LOCATION_CIPHER_CCMP_128: CCMP 128 + * @IWL_LOCATION_CIPHER_GCMP_128: GCMP 128 + * @IWL_LOCATION_CIPHER_GCMP_256: GCMP 256 + * @IWL_LOCATION_CIPHER_INVALID: security is not used. + * @IWL_LOCATION_CIPHER_MAX: maximum value for this enum. + */ +enum iwl_location_cipher { + IWL_LOCATION_CIPHER_CCMP_128, + IWL_LOCATION_CIPHER_GCMP_128, + IWL_LOCATION_CIPHER_GCMP_256, + IWL_LOCATION_CIPHER_INVALID, + IWL_LOCATION_CIPHER_MAX, +}; + +/** + * struct iwl_tof_range_req_ap_entry_v6 - AP configuration parameters + * @initiator_ap_flags: see &enum iwl_initiator_ap_flags. + * @channel_num: AP Channel number + * @format_bw: bits 0 - 3: &enum iwl_location_frame_format. + * bits 4 - 7: &enum iwl_location_bw. + * @ctrl_ch_position: Coding of the control channel position relative to the + * center frequency, see iwl_mvm_get_ctrl_pos(). + * @ftmr_max_retries: Max number of retries to send the FTMR in case of no + * reply from the AP. + * @bssid: AP's BSSID + * @burst_period: Recommended value to be sent to the AP. Measurement + * periodicity In units of 100ms. ignored if num_of_bursts_exp = 0 + * @samples_per_burst: the number of FTMs pairs in single Burst (1-31); + * @num_of_bursts: Recommended value to be sent to the AP. 2s Exponent of + * the number of measurement iterations (min 2^0 = 1, max 2^14) + * @sta_id: the station id of the AP. Only relevant when associated to the AP, + * otherwise should be set to &IWL_MVM_INVALID_STA. + * @cipher: pairwise cipher suite for secured measurement. + * &enum iwl_location_cipher. + * @hltk: HLTK to be used for secured 11az measurement + * @tk: TK to be used for secured 11az measurement + * @calib: An array of calibration values per FTM rx bandwidth. + * If &IWL_INITIATOR_AP_FLAGS_USE_CALIB is set, the fw will use the + * calibration value that corresponds to the rx bandwidth of the FTM + * frame. + * @beacon_interval: beacon interval of the AP in TUs. Only required if + * &IWL_INITIATOR_AP_FLAGS_TB is set. + */ +struct iwl_tof_range_req_ap_entry_v6 { + __le32 initiator_ap_flags; + u8 channel_num; + u8 format_bw; + u8 ctrl_ch_position; + u8 ftmr_max_retries; + u8 bssid[ETH_ALEN]; + __le16 burst_period; + u8 samples_per_burst; + u8 num_of_bursts; + u8 sta_id; + u8 cipher; + u8 hltk[HLTK_11AZ_LEN]; + u8 tk[TK_11AZ_LEN]; + __le16 calib[IWL_TOF_BW_NUM]; + __le16 beacon_interval; +} __packed; /* LOCATION_RANGE_REQ_AP_ENTRY_CMD_API_S_VER_6 */ + +/** + * struct iwl_tof_range_req_ap_entry_v7 - AP configuration parameters + * @initiator_ap_flags: see &enum iwl_initiator_ap_flags. + * @channel_num: AP Channel number + * @format_bw: bits 0 - 3: &enum iwl_location_frame_format. + * bits 4 - 7: &enum iwl_location_bw. + * @ctrl_ch_position: Coding of the control channel position relative to the + * center frequency, see iwl_mvm_get_ctrl_pos(). + * @ftmr_max_retries: Max number of retries to send the FTMR in case of no + * reply from the AP. + * @bssid: AP's BSSID + * @burst_period: Recommended value to be sent to the AP. Measurement + * periodicity In units of 100ms. ignored if num_of_bursts_exp = 0 + * @samples_per_burst: the number of FTMs pairs in single Burst (1-31); + * @num_of_bursts: Recommended value to be sent to the AP. 2s Exponent of + * the number of measurement iterations (min 2^0 = 1, max 2^14) + * @sta_id: the station id of the AP. Only relevant when associated to the AP, + * otherwise should be set to &IWL_MVM_INVALID_STA. + * @cipher: pairwise cipher suite for secured measurement. + * &enum iwl_location_cipher. + * @hltk: HLTK to be used for secured 11az measurement + * @tk: TK to be used for secured 11az measurement + * @calib: An array of calibration values per FTM rx bandwidth. + * If &IWL_INITIATOR_AP_FLAGS_USE_CALIB is set, the fw will use the + * calibration value that corresponds to the rx bandwidth of the FTM + * frame. + * @beacon_interval: beacon interval of the AP in TUs. Only required if + * &IWL_INITIATOR_AP_FLAGS_TB is set. + * @rx_pn: the next expected PN for protected management frames Rx. LE byte + * order. Only valid if &IWL_INITIATOR_AP_FLAGS_SECURED is set and sta_id + * is set to &IWL_MVM_INVALID_STA. + * @tx_pn: the next PN to use for protected management frames Tx. LE byte + * order. Only valid if &IWL_INITIATOR_AP_FLAGS_SECURED is set and sta_id + * is set to &IWL_MVM_INVALID_STA. + */ +struct iwl_tof_range_req_ap_entry_v7 { + __le32 initiator_ap_flags; + u8 channel_num; + u8 format_bw; + u8 ctrl_ch_position; + u8 ftmr_max_retries; + u8 bssid[ETH_ALEN]; + __le16 burst_period; + u8 samples_per_burst; + u8 num_of_bursts; + u8 sta_id; + u8 cipher; + u8 hltk[HLTK_11AZ_LEN]; + u8 tk[TK_11AZ_LEN]; + __le16 calib[IWL_TOF_BW_NUM]; + __le16 beacon_interval; + u8 rx_pn[IEEE80211_CCMP_PN_LEN]; + u8 tx_pn[IEEE80211_CCMP_PN_LEN]; +} __packed; /* LOCATION_RANGE_REQ_AP_ENTRY_CMD_API_S_VER_7 */ + +#define IWL_LOCATION_MAX_STS_POS 3 + +/** + * struct iwl_tof_range_req_ap_entry_v8 - AP configuration parameters + * @initiator_ap_flags: see &enum iwl_initiator_ap_flags. + * @channel_num: AP Channel number + * @format_bw: bits 0 - 3: &enum iwl_location_frame_format. + * bits 4 - 7: &enum iwl_location_bw. + * @ctrl_ch_position: Coding of the control channel position relative to the + * center frequency, see iwl_mvm_get_ctrl_pos(). + * @ftmr_max_retries: Max number of retries to send the FTMR in case of no + * reply from the AP. + * @bssid: AP's BSSID + * @burst_period: Recommended value to be sent to the AP. Measurement + * periodicity In units of 100ms. ignored if num_of_bursts_exp = 0 + * @samples_per_burst: the number of FTMs pairs in single Burst (1-31); + * @num_of_bursts: Recommended value to be sent to the AP. 2s Exponent of + * the number of measurement iterations (min 2^0 = 1, max 2^14) + * @sta_id: the station id of the AP. Only relevant when associated to the AP, + * otherwise should be set to &IWL_MVM_INVALID_STA. + * @cipher: pairwise cipher suite for secured measurement. + * &enum iwl_location_cipher. + * @hltk: HLTK to be used for secured 11az measurement + * @tk: TK to be used for secured 11az measurement + * @calib: An array of calibration values per FTM rx bandwidth. + * If &IWL_INITIATOR_AP_FLAGS_USE_CALIB is set, the fw will use the + * calibration value that corresponds to the rx bandwidth of the FTM + * frame. + * @beacon_interval: beacon interval of the AP in TUs. Only required if + * &IWL_INITIATOR_AP_FLAGS_TB is set. + * @rx_pn: the next expected PN for protected management frames Rx. LE byte + * order. Only valid if &IWL_INITIATOR_AP_FLAGS_SECURED is set and sta_id + * is set to &IWL_MVM_INVALID_STA. + * @tx_pn: the next PN to use for protected management frames Tx. LE byte + * order. Only valid if &IWL_INITIATOR_AP_FLAGS_SECURED is set and sta_id + * is set to &IWL_MVM_INVALID_STA. + * @r2i_ndp_params: parameters for R2I NDP ranging negotiation. + * bits 0 - 2: max LTF repetitions + * bits 3 - 5: max number of spatial streams + * bits 6 - 7: reserved + * @i2r_ndp_params: parameters for I2R NDP ranging negotiation. + * bits 0 - 2: max LTF repetitions + * bits 3 - 5: max number of spatial streams (supported values are < 2) + * bits 6 - 7: reserved + * @r2i_max_total_ltf: R2I Max Total LTFs for NDP ranging negotiation. + * One of &enum ieee80211_range_params_max_total_ltf. + * @i2r_max_total_ltf: I2R Max Total LTFs for NDP ranging negotiation. + * One of &enum ieee80211_range_params_max_total_ltf. + */ +struct iwl_tof_range_req_ap_entry_v8 { + __le32 initiator_ap_flags; + u8 channel_num; + u8 format_bw; + u8 ctrl_ch_position; + u8 ftmr_max_retries; + u8 bssid[ETH_ALEN]; + __le16 burst_period; + u8 samples_per_burst; + u8 num_of_bursts; + u8 sta_id; + u8 cipher; + u8 hltk[HLTK_11AZ_LEN]; + u8 tk[TK_11AZ_LEN]; + __le16 calib[IWL_TOF_BW_NUM]; + __le16 beacon_interval; + u8 rx_pn[IEEE80211_CCMP_PN_LEN]; + u8 tx_pn[IEEE80211_CCMP_PN_LEN]; + u8 r2i_ndp_params; + u8 i2r_ndp_params; + u8 r2i_max_total_ltf; + u8 i2r_max_total_ltf; +} __packed; /* LOCATION_RANGE_REQ_AP_ENTRY_CMD_API_S_VER_8 */ + +/** + * struct iwl_tof_range_req_ap_entry_v9 - AP configuration parameters + * @initiator_ap_flags: see &enum iwl_initiator_ap_flags. + * @channel_num: AP Channel number + * @format_bw: bits 0 - 3: &enum iwl_location_frame_format. + * bits 4 - 7: &enum iwl_location_bw. + * @ctrl_ch_position: Coding of the control channel position relative to the + * center frequency, see iwl_mvm_get_ctrl_pos(). + * @ftmr_max_retries: Max number of retries to send the FTMR in case of no + * reply from the AP. + * @bssid: AP's BSSID + * @burst_period: For EDCA based ranging: Recommended value to be sent to the + * AP. Measurement periodicity In units of 100ms. ignored if + * num_of_bursts_exp = 0. + * For non trigger based NDP ranging, the maximum time between + * measurements in units of milliseconds. + * @samples_per_burst: the number of FTMs pairs in single Burst (1-31); + * @num_of_bursts: Recommended value to be sent to the AP. 2s Exponent of + * the number of measurement iterations (min 2^0 = 1, max 2^14) + * @sta_id: the station id of the AP. Only relevant when associated to the AP, + * otherwise should be set to &IWL_MVM_INVALID_STA. + * @cipher: pairwise cipher suite for secured measurement. + * &enum iwl_location_cipher. + * @hltk: HLTK to be used for secured 11az measurement + * @tk: TK to be used for secured 11az measurement + * @calib: An array of calibration values per FTM rx bandwidth. + * If &IWL_INITIATOR_AP_FLAGS_USE_CALIB is set, the fw will use the + * calibration value that corresponds to the rx bandwidth of the FTM + * frame. + * @beacon_interval: beacon interval of the AP in TUs. Only required if + * &IWL_INITIATOR_AP_FLAGS_TB is set. + * @bss_color: the BSS color of the responder. Only valid if + * &IWL_INITIATOR_AP_FLAGS_TB or &IWL_INITIATOR_AP_FLAGS_NON_TB is set. + * @rx_pn: the next expected PN for protected management frames Rx. LE byte + * order. Only valid if &IWL_INITIATOR_AP_FLAGS_SECURED is set and sta_id + * is set to &IWL_MVM_INVALID_STA. + * @tx_pn: the next PN to use for protected management frames Tx. LE byte + * order. Only valid if &IWL_INITIATOR_AP_FLAGS_SECURED is set and sta_id + * is set to &IWL_MVM_INVALID_STA. + * @r2i_ndp_params: parameters for R2I NDP ranging negotiation. + * bits 0 - 2: max LTF repetitions + * bits 3 - 5: max number of spatial streams + * bits 6 - 7: reserved + * @i2r_ndp_params: parameters for I2R NDP ranging negotiation. + * bits 0 - 2: max LTF repetitions + * bits 3 - 5: max number of spatial streams (supported values are < 2) + * bits 6 - 7: reserved + * @r2i_max_total_ltf: R2I Max Total LTFs for NDP ranging negotiation. + * One of &enum ieee80211_range_params_max_total_ltf. + * @i2r_max_total_ltf: I2R Max Total LTFs for NDP ranging negotiation. + * One of &enum ieee80211_range_params_max_total_ltf. + * @bss_color: the BSS color of the responder. Only valid if + * &IWL_INITIATOR_AP_FLAGS_NON_TB or &IWL_INITIATOR_AP_FLAGS_TB is set. + * @band: 0 for 5.2 GHz, 1 for 2.4 GHz, 2 for 6GHz + * @min_time_between_msr: For non trigger based NDP ranging, the minimum time + * between measurements in units of milliseconds + */ +struct iwl_tof_range_req_ap_entry_v9 { + __le32 initiator_ap_flags; + u8 channel_num; + u8 format_bw; + u8 ctrl_ch_position; + u8 ftmr_max_retries; + u8 bssid[ETH_ALEN]; + __le16 burst_period; + u8 samples_per_burst; + u8 num_of_bursts; + u8 sta_id; + u8 cipher; + u8 hltk[HLTK_11AZ_LEN]; + u8 tk[TK_11AZ_LEN]; + __le16 calib[IWL_TOF_BW_NUM]; + u16 beacon_interval; + u8 rx_pn[IEEE80211_CCMP_PN_LEN]; + u8 tx_pn[IEEE80211_CCMP_PN_LEN]; + u8 r2i_ndp_params; + u8 i2r_ndp_params; + u8 r2i_max_total_ltf; + u8 i2r_max_total_ltf; + u8 bss_color; + u8 band; + __le16 min_time_between_msr; +} __packed; /* LOCATION_RANGE_REQ_AP_ENTRY_CMD_API_S_VER_9 */ + +/** + * enum iwl_tof_response_mode + * @IWL_MVM_TOF_RESPONSE_ASAP: report each AP measurement separately as soon as + * possible (not supported for this release) + * @IWL_MVM_TOF_RESPONSE_TIMEOUT: report all AP measurements as a batch upon + * timeout expiration + * @IWL_MVM_TOF_RESPONSE_COMPLETE: report all AP measurements as a batch at the + * earlier of: measurements completion / timeout + * expiration. + */ +enum iwl_tof_response_mode { + IWL_MVM_TOF_RESPONSE_ASAP, + IWL_MVM_TOF_RESPONSE_TIMEOUT, + IWL_MVM_TOF_RESPONSE_COMPLETE, +}; + +/** + * enum iwl_tof_initiator_flags + * + * @IWL_TOF_INITIATOR_FLAGS_FAST_ALGO_DISABLED: disable fast algo, meaning run + * the algo on ant A+B, instead of only one of them. + * @IWL_TOF_INITIATOR_FLAGS_RX_CHAIN_SEL_A: open RX antenna A for FTMs RX + * @IWL_TOF_INITIATOR_FLAGS_RX_CHAIN_SEL_B: open RX antenna B for FTMs RX + * @IWL_TOF_INITIATOR_FLAGS_RX_CHAIN_SEL_C: open RX antenna C for FTMs RX + * @IWL_TOF_INITIATOR_FLAGS_TX_CHAIN_SEL_A: use antenna A fo TX ACKs during FTM + * @IWL_TOF_INITIATOR_FLAGS_TX_CHAIN_SEL_B: use antenna B fo TX ACKs during FTM + * @IWL_TOF_INITIATOR_FLAGS_TX_CHAIN_SEL_C: use antenna C fo TX ACKs during FTM + * @IWL_TOF_INITIATOR_FLAGS_MACADDR_RANDOM: use random mac address for FTM + * @IWL_TOF_INITIATOR_FLAGS_SPECIFIC_CALIB: use the specific calib value from + * the range request command + * @IWL_TOF_INITIATOR_FLAGS_COMMON_CALIB: use the common calib value from the + * ragne request command + * @IWL_TOF_INITIATOR_FLAGS_NON_ASAP_SUPPORT: support non-asap measurements + */ +enum iwl_tof_initiator_flags { + IWL_TOF_INITIATOR_FLAGS_FAST_ALGO_DISABLED = BIT(0), + IWL_TOF_INITIATOR_FLAGS_RX_CHAIN_SEL_A = BIT(1), + IWL_TOF_INITIATOR_FLAGS_RX_CHAIN_SEL_B = BIT(2), + IWL_TOF_INITIATOR_FLAGS_RX_CHAIN_SEL_C = BIT(3), + IWL_TOF_INITIATOR_FLAGS_TX_CHAIN_SEL_A = BIT(4), + IWL_TOF_INITIATOR_FLAGS_TX_CHAIN_SEL_B = BIT(5), + IWL_TOF_INITIATOR_FLAGS_TX_CHAIN_SEL_C = BIT(6), + IWL_TOF_INITIATOR_FLAGS_MACADDR_RANDOM = BIT(7), + IWL_TOF_INITIATOR_FLAGS_SPECIFIC_CALIB = BIT(15), + IWL_TOF_INITIATOR_FLAGS_COMMON_CALIB = BIT(16), + IWL_TOF_INITIATOR_FLAGS_NON_ASAP_SUPPORT = BIT(20), +}; /* LOCATION_RANGE_REQ_CMD_API_S_VER_5 */ + +#define IWL_MVM_TOF_MAX_APS 5 +#define IWL_MVM_TOF_MAX_TWO_SIDED_APS 5 + +/** + * struct iwl_tof_range_req_cmd_v5 - start measurement cmd + * @initiator_flags: see flags @ iwl_tof_initiator_flags + * @request_id: A Token incremented per request. The same Token will be + * sent back in the range response + * @initiator: 0- NW initiated, 1 - Client Initiated + * @one_sided_los_disable: '0'- run ML-Algo for both ToF/OneSided, + * '1' - run ML-Algo for ToF only + * @req_timeout: Requested timeout of the response in units of 100ms. + * This is equivalent to the session time configured to the + * LMAC in Initiator Request + * @report_policy: Supported partially for this release: For current release - + * the range report will be uploaded as a batch when ready or + * when the session is done (successfully / partially). + * one of iwl_tof_response_mode. + * @reserved0: reserved + * @num_of_ap: Number of APs to measure (error if > IWL_MVM_TOF_MAX_APS) + * @macaddr_random: '0' Use default source MAC address (i.e. p2_p), + * '1' Use MAC Address randomization according to the below + * @range_req_bssid: ranging request BSSID + * @macaddr_template: MAC address template to use for non-randomized bits + * @macaddr_mask: Bits set to 0 shall be copied from the MAC address template. + * Bits set to 1 shall be randomized by the UMAC + * @ftm_rx_chains: Rx chain to open to receive Responder's FTMs (XVT) + * @ftm_tx_chains: Tx chain to send the ack to the Responder FTM (XVT) + * @common_calib: The common calib value to inject to this measurement calc + * @specific_calib: The specific calib value to inject to this measurement calc + * @ap: per-AP request data + */ +struct iwl_tof_range_req_cmd_v5 { + __le32 initiator_flags; + u8 request_id; + u8 initiator; + u8 one_sided_los_disable; + u8 req_timeout; + u8 report_policy; + u8 reserved0; + u8 num_of_ap; + u8 macaddr_random; + u8 range_req_bssid[ETH_ALEN]; + u8 macaddr_template[ETH_ALEN]; + u8 macaddr_mask[ETH_ALEN]; + u8 ftm_rx_chains; + u8 ftm_tx_chains; + __le16 common_calib; + __le16 specific_calib; + struct iwl_tof_range_req_ap_entry_v2 ap[IWL_MVM_TOF_MAX_APS]; +} __packed; +/* LOCATION_RANGE_REQ_CMD_API_S_VER_5 */ + +/** + * struct iwl_tof_range_req_cmd_v7 - start measurement cmd + * @initiator_flags: see flags @ iwl_tof_initiator_flags + * @request_id: A Token incremented per request. The same Token will be + * sent back in the range response + * @num_of_ap: Number of APs to measure (error if > IWL_MVM_TOF_MAX_APS) + * @range_req_bssid: ranging request BSSID + * @macaddr_mask: Bits set to 0 shall be copied from the MAC address template. + * Bits set to 1 shall be randomized by the UMAC + * @macaddr_template: MAC address template to use for non-randomized bits + * @req_timeout_ms: Requested timeout of the response in units of milliseconds. + * This is the session time for completing the measurement. + * @tsf_mac_id: report the measurement start time for each ap in terms of the + * TSF of this mac id. 0xff to disable TSF reporting. + * @common_calib: The common calib value to inject to this measurement calc + * @specific_calib: The specific calib value to inject to this measurement calc + * @ap: per-AP request data, see &struct iwl_tof_range_req_ap_entry_v2. + */ +struct iwl_tof_range_req_cmd_v7 { + __le32 initiator_flags; + u8 request_id; + u8 num_of_ap; + u8 range_req_bssid[ETH_ALEN]; + u8 macaddr_mask[ETH_ALEN]; + u8 macaddr_template[ETH_ALEN]; + __le32 req_timeout_ms; + __le32 tsf_mac_id; + __le16 common_calib; + __le16 specific_calib; + struct iwl_tof_range_req_ap_entry_v3 ap[IWL_MVM_TOF_MAX_APS]; +} __packed; /* LOCATION_RANGE_REQ_CMD_API_S_VER_7 */ + +/** + * struct iwl_tof_range_req_cmd_v8 - start measurement cmd + * @initiator_flags: see flags @ iwl_tof_initiator_flags + * @request_id: A Token incremented per request. The same Token will be + * sent back in the range response + * @num_of_ap: Number of APs to measure (error if > IWL_MVM_TOF_MAX_APS) + * @range_req_bssid: ranging request BSSID + * @macaddr_mask: Bits set to 0 shall be copied from the MAC address template. + * Bits set to 1 shall be randomized by the UMAC + * @macaddr_template: MAC address template to use for non-randomized bits + * @req_timeout_ms: Requested timeout of the response in units of milliseconds. + * This is the session time for completing the measurement. + * @tsf_mac_id: report the measurement start time for each ap in terms of the + * TSF of this mac id. 0xff to disable TSF reporting. + * @common_calib: The common calib value to inject to this measurement calc + * @specific_calib: The specific calib value to inject to this measurement calc + * @ap: per-AP request data, see &struct iwl_tof_range_req_ap_entry_v2. + */ +struct iwl_tof_range_req_cmd_v8 { + __le32 initiator_flags; + u8 request_id; + u8 num_of_ap; + u8 range_req_bssid[ETH_ALEN]; + u8 macaddr_mask[ETH_ALEN]; + u8 macaddr_template[ETH_ALEN]; + __le32 req_timeout_ms; + __le32 tsf_mac_id; + __le16 common_calib; + __le16 specific_calib; + struct iwl_tof_range_req_ap_entry_v4 ap[IWL_MVM_TOF_MAX_APS]; +} __packed; /* LOCATION_RANGE_REQ_CMD_API_S_VER_8 */ + +/** + * struct iwl_tof_range_req_cmd_v9 - start measurement cmd + * @initiator_flags: see flags @ iwl_tof_initiator_flags + * @request_id: A Token incremented per request. The same Token will be + * sent back in the range response + * @num_of_ap: Number of APs to measure (error if > IWL_MVM_TOF_MAX_APS) + * @range_req_bssid: ranging request BSSID + * @macaddr_mask: Bits set to 0 shall be copied from the MAC address template. + * Bits set to 1 shall be randomized by the UMAC + * @macaddr_template: MAC address template to use for non-randomized bits + * @req_timeout_ms: Requested timeout of the response in units of milliseconds. + * This is the session time for completing the measurement. + * @tsf_mac_id: report the measurement start time for each ap in terms of the + * TSF of this mac id. 0xff to disable TSF reporting. + * @ap: per-AP request data, see &struct iwl_tof_range_req_ap_entry_v2. + */ +struct iwl_tof_range_req_cmd_v9 { + __le32 initiator_flags; + u8 request_id; + u8 num_of_ap; + u8 range_req_bssid[ETH_ALEN]; + u8 macaddr_mask[ETH_ALEN]; + u8 macaddr_template[ETH_ALEN]; + __le32 req_timeout_ms; + __le32 tsf_mac_id; + struct iwl_tof_range_req_ap_entry_v6 ap[IWL_MVM_TOF_MAX_APS]; +} __packed; /* LOCATION_RANGE_REQ_CMD_API_S_VER_9 */ + +/** + * struct iwl_tof_range_req_cmd_v11 - start measurement cmd + * @initiator_flags: see flags @ iwl_tof_initiator_flags + * @request_id: A Token incremented per request. The same Token will be + * sent back in the range response + * @num_of_ap: Number of APs to measure (error if > IWL_MVM_TOF_MAX_APS) + * @range_req_bssid: ranging request BSSID + * @macaddr_mask: Bits set to 0 shall be copied from the MAC address template. + * Bits set to 1 shall be randomized by the UMAC + * @macaddr_template: MAC address template to use for non-randomized bits + * @req_timeout_ms: Requested timeout of the response in units of milliseconds. + * This is the session time for completing the measurement. + * @tsf_mac_id: report the measurement start time for each ap in terms of the + * TSF of this mac id. 0xff to disable TSF reporting. + * @ap: per-AP request data, see &struct iwl_tof_range_req_ap_entry_v2. + */ +struct iwl_tof_range_req_cmd_v11 { + __le32 initiator_flags; + u8 request_id; + u8 num_of_ap; + u8 range_req_bssid[ETH_ALEN]; + u8 macaddr_mask[ETH_ALEN]; + u8 macaddr_template[ETH_ALEN]; + __le32 req_timeout_ms; + __le32 tsf_mac_id; + struct iwl_tof_range_req_ap_entry_v7 ap[IWL_MVM_TOF_MAX_APS]; +} __packed; /* LOCATION_RANGE_REQ_CMD_API_S_VER_11 */ + +/** + * struct iwl_tof_range_req_cmd_v12 - start measurement cmd + * @initiator_flags: see flags @ iwl_tof_initiator_flags + * @request_id: A Token incremented per request. The same Token will be + * sent back in the range response + * @num_of_ap: Number of APs to measure (error if > IWL_MVM_TOF_MAX_APS) + * @range_req_bssid: ranging request BSSID + * @macaddr_mask: Bits set to 0 shall be copied from the MAC address template. + * Bits set to 1 shall be randomized by the UMAC + * @macaddr_template: MAC address template to use for non-randomized bits + * @req_timeout_ms: Requested timeout of the response in units of milliseconds. + * This is the session time for completing the measurement. + * @tsf_mac_id: report the measurement start time for each ap in terms of the + * TSF of this mac id. 0xff to disable TSF reporting. + * @ap: per-AP request data, see &struct iwl_tof_range_req_ap_entry_v2. + */ +struct iwl_tof_range_req_cmd_v12 { + __le32 initiator_flags; + u8 request_id; + u8 num_of_ap; + u8 range_req_bssid[ETH_ALEN]; + u8 macaddr_mask[ETH_ALEN]; + u8 macaddr_template[ETH_ALEN]; + __le32 req_timeout_ms; + __le32 tsf_mac_id; + struct iwl_tof_range_req_ap_entry_v8 ap[IWL_MVM_TOF_MAX_APS]; +} __packed; /* LOCATION_RANGE_REQ_CMD_API_S_VER_12 */ + +/** + * struct iwl_tof_range_req_cmd_v13 - start measurement cmd + * @initiator_flags: see flags @ iwl_tof_initiator_flags + * @request_id: A Token incremented per request. The same Token will be + * sent back in the range response + * @num_of_ap: Number of APs to measure (error if > IWL_MVM_TOF_MAX_APS) + * @range_req_bssid: ranging request BSSID + * @macaddr_mask: Bits set to 0 shall be copied from the MAC address template. + * Bits set to 1 shall be randomized by the UMAC + * @macaddr_template: MAC address template to use for non-randomized bits + * @req_timeout_ms: Requested timeout of the response in units of milliseconds. + * This is the session time for completing the measurement. + * @tsf_mac_id: report the measurement start time for each ap in terms of the + * TSF of this mac id. 0xff to disable TSF reporting. + * @ap: per-AP request data, see &struct iwl_tof_range_req_ap_entry_v9. + */ +struct iwl_tof_range_req_cmd_v13 { + __le32 initiator_flags; + u8 request_id; + u8 num_of_ap; + u8 range_req_bssid[ETH_ALEN]; + u8 macaddr_mask[ETH_ALEN]; + u8 macaddr_template[ETH_ALEN]; + __le32 req_timeout_ms; + __le32 tsf_mac_id; + struct iwl_tof_range_req_ap_entry_v9 ap[IWL_MVM_TOF_MAX_APS]; +} __packed; /* LOCATION_RANGE_REQ_CMD_API_S_VER_13 */ + +/* + * enum iwl_tof_range_request_status - status of the sent request + * @IWL_TOF_RANGE_REQUEST_STATUS_SUCCESSFUL - FW successfully received the + * request + * @IWL_TOF_RANGE_REQUEST_STATUS_BUSY - FW is busy with a previous request, the + * sent request will not be handled + */ +enum iwl_tof_range_request_status { + IWL_TOF_RANGE_REQUEST_STATUS_SUCCESS, + IWL_TOF_RANGE_REQUEST_STATUS_BUSY, +}; + +/** + * enum iwl_tof_entry_status + * + * @IWL_TOF_ENTRY_SUCCESS: successful measurement. + * @IWL_TOF_ENTRY_GENERAL_FAILURE: General failure. + * @IWL_TOF_ENTRY_NO_RESPONSE: Responder didn't reply to the request. + * @IWL_TOF_ENTRY_REQUEST_REJECTED: Responder rejected the request. + * @IWL_TOF_ENTRY_NOT_SCHEDULED: Time event was scheduled but not called yet. + * @IWL_TOF_ENTRY_TIMING_MEASURE_TIMEOUT: Time event triggered but no + * measurement was completed. + * @IWL_TOF_ENTRY_TARGET_DIFF_CH_CANNOT_CHANGE: No range due inability to switch + * from the primary channel. + * @IWL_TOF_ENTRY_RANGE_NOT_SUPPORTED: Device doesn't support FTM. + * @IWL_TOF_ENTRY_REQUEST_ABORT_UNKNOWN_REASON: Request aborted due to unknown + * reason. + * @IWL_TOF_ENTRY_LOCATION_INVALID_T1_T4_TIME_STAMP: Failure due to invalid + * T1/T4. + * @IWL_TOF_ENTRY_11MC_PROTOCOL_FAILURE: Failure due to invalid FTM frame + * structure. + * @IWL_TOF_ENTRY_REQUEST_CANNOT_SCHED: Request cannot be scheduled. + * @IWL_TOF_ENTRY_RESPONDER_CANNOT_COLABORATE: Responder cannot serve the + * initiator for some period, period supplied in @refusal_period. + * @IWL_TOF_ENTRY_BAD_REQUEST_ARGS: Bad request arguments. + * @IWL_TOF_ENTRY_WIFI_NOT_ENABLED: Wifi not enabled. + * @IWL_TOF_ENTRY_RESPONDER_OVERRIDE_PARAMS: Responder override the original + * parameters within the current session. + */ +enum iwl_tof_entry_status { + IWL_TOF_ENTRY_SUCCESS = 0, + IWL_TOF_ENTRY_GENERAL_FAILURE = 1, + IWL_TOF_ENTRY_NO_RESPONSE = 2, + IWL_TOF_ENTRY_REQUEST_REJECTED = 3, + IWL_TOF_ENTRY_NOT_SCHEDULED = 4, + IWL_TOF_ENTRY_TIMING_MEASURE_TIMEOUT = 5, + IWL_TOF_ENTRY_TARGET_DIFF_CH_CANNOT_CHANGE = 6, + IWL_TOF_ENTRY_RANGE_NOT_SUPPORTED = 7, + IWL_TOF_ENTRY_REQUEST_ABORT_UNKNOWN_REASON = 8, + IWL_TOF_ENTRY_LOCATION_INVALID_T1_T4_TIME_STAMP = 9, + IWL_TOF_ENTRY_11MC_PROTOCOL_FAILURE = 10, + IWL_TOF_ENTRY_REQUEST_CANNOT_SCHED = 11, + IWL_TOF_ENTRY_RESPONDER_CANNOT_COLABORATE = 12, + IWL_TOF_ENTRY_BAD_REQUEST_ARGS = 13, + IWL_TOF_ENTRY_WIFI_NOT_ENABLED = 14, + IWL_TOF_ENTRY_RESPONDER_OVERRIDE_PARAMS = 15, +}; /* LOCATION_RANGE_RSP_AP_ENTRY_NTFY_API_S_VER_2 */ + +/** + * struct iwl_tof_range_rsp_ap_entry_ntfy_v3 - AP parameters (response) + * @bssid: BSSID of the AP + * @measure_status: current APs measurement status, one of + * &enum iwl_tof_entry_status. + * @measure_bw: Current AP Bandwidth: 0 20MHz, 1 40MHz, 2 80MHz + * @rtt: The Round Trip Time that took for the last measurement for + * current AP [pSec] + * @rtt_variance: The Variance of the RTT values measured for current AP + * @rtt_spread: The Difference between the maximum and the minimum RTT + * values measured for current AP in the current session [pSec] + * @rssi: RSSI as uploaded in the Channel Estimation notification + * @rssi_spread: The Difference between the maximum and the minimum RSSI values + * measured for current AP in the current session + * @reserved: reserved + * @refusal_period: refusal period in case of + * @IWL_TOF_ENTRY_RESPONDER_CANNOT_COLABORATE [sec] + * @range: Measured range [cm] + * @range_variance: Measured range variance [cm] + * @timestamp: The GP2 Clock [usec] where Channel Estimation notification was + * uploaded by the LMAC + * @t2t3_initiator: as calculated from the algo in the initiator + * @t1t4_responder: as calculated from the algo in the responder + * @common_calib: Calib val that was used in for this AP measurement + * @specific_calib: val that was used in for this AP measurement + * @papd_calib_output: The result of the tof papd calibration that was injected + * into the algorithm. + */ +struct iwl_tof_range_rsp_ap_entry_ntfy_v3 { + u8 bssid[ETH_ALEN]; + u8 measure_status; + u8 measure_bw; + __le32 rtt; + __le32 rtt_variance; + __le32 rtt_spread; + s8 rssi; + u8 rssi_spread; + u8 reserved; + u8 refusal_period; + __le32 range; + __le32 range_variance; + __le32 timestamp; + __le32 t2t3_initiator; + __le32 t1t4_responder; + __le16 common_calib; + __le16 specific_calib; + __le32 papd_calib_output; +} __packed; /* LOCATION_RANGE_RSP_AP_ETRY_NTFY_API_S_VER_3 */ + +/** + * struct iwl_tof_range_rsp_ap_entry_ntfy_v4 - AP parameters (response) + * @bssid: BSSID of the AP + * @measure_status: current APs measurement status, one of + * &enum iwl_tof_entry_status. + * @measure_bw: Current AP Bandwidth: 0 20MHz, 1 40MHz, 2 80MHz + * @rtt: The Round Trip Time that took for the last measurement for + * current AP [pSec] + * @rtt_variance: The Variance of the RTT values measured for current AP + * @rtt_spread: The Difference between the maximum and the minimum RTT + * values measured for current AP in the current session [pSec] + * @rssi: RSSI as uploaded in the Channel Estimation notification + * @rssi_spread: The Difference between the maximum and the minimum RSSI values + * measured for current AP in the current session + * @last_burst: 1 if no more FTM sessions are scheduled for this responder + * @refusal_period: refusal period in case of + * @IWL_TOF_ENTRY_RESPONDER_CANNOT_COLABORATE [sec] + * @timestamp: The GP2 Clock [usec] where Channel Estimation notification was + * uploaded by the LMAC + * @start_tsf: measurement start time in TSF of the mac specified in the range + * request + * @rx_rate_n_flags: rate and flags of the last FTM frame received from this + * responder + * @tx_rate_n_flags: rate and flags of the last ack sent to this responder + * @t2t3_initiator: as calculated from the algo in the initiator + * @t1t4_responder: as calculated from the algo in the responder + * @common_calib: Calib val that was used in for this AP measurement + * @specific_calib: val that was used in for this AP measurement + * @papd_calib_output: The result of the tof papd calibration that was injected + * into the algorithm. + */ +struct iwl_tof_range_rsp_ap_entry_ntfy_v4 { + u8 bssid[ETH_ALEN]; + u8 measure_status; + u8 measure_bw; + __le32 rtt; + __le32 rtt_variance; + __le32 rtt_spread; + s8 rssi; + u8 rssi_spread; + u8 last_burst; + u8 refusal_period; + __le32 timestamp; + __le32 start_tsf; + __le32 rx_rate_n_flags; + __le32 tx_rate_n_flags; + __le32 t2t3_initiator; + __le32 t1t4_responder; + __le16 common_calib; + __le16 specific_calib; + __le32 papd_calib_output; +} __packed; /* LOCATION_RANGE_RSP_AP_ETRY_NTFY_API_S_VER_4 */ + +/** + * struct iwl_tof_range_rsp_ap_entry_ntfy_v5 - AP parameters (response) + * @bssid: BSSID of the AP + * @measure_status: current APs measurement status, one of + * &enum iwl_tof_entry_status. + * @measure_bw: Current AP Bandwidth: 0 20MHz, 1 40MHz, 2 80MHz + * @rtt: The Round Trip Time that took for the last measurement for + * current AP [pSec] + * @rtt_variance: The Variance of the RTT values measured for current AP + * @rtt_spread: The Difference between the maximum and the minimum RTT + * values measured for current AP in the current session [pSec] + * @rssi: RSSI as uploaded in the Channel Estimation notification + * @rssi_spread: The Difference between the maximum and the minimum RSSI values + * measured for current AP in the current session + * @last_burst: 1 if no more FTM sessions are scheduled for this responder + * @refusal_period: refusal period in case of + * @IWL_TOF_ENTRY_RESPONDER_CANNOT_COLABORATE [sec] + * @timestamp: The GP2 Clock [usec] where Channel Estimation notification was + * uploaded by the LMAC + * @start_tsf: measurement start time in TSF of the mac specified in the range + * request + * @rx_rate_n_flags: rate and flags of the last FTM frame received from this + * responder + * @tx_rate_n_flags: rate and flags of the last ack sent to this responder + * @t2t3_initiator: as calculated from the algo in the initiator + * @t1t4_responder: as calculated from the algo in the responder + * @common_calib: Calib val that was used in for this AP measurement + * @specific_calib: val that was used in for this AP measurement + * @papd_calib_output: The result of the tof papd calibration that was injected + * into the algorithm. + * @rttConfidence: a value between 0 - 31 that represents the rtt accuracy. + * @reserved: for alignment + */ +struct iwl_tof_range_rsp_ap_entry_ntfy_v5 { + u8 bssid[ETH_ALEN]; + u8 measure_status; + u8 measure_bw; + __le32 rtt; + __le32 rtt_variance; + __le32 rtt_spread; + s8 rssi; + u8 rssi_spread; + u8 last_burst; + u8 refusal_period; + __le32 timestamp; + __le32 start_tsf; + __le32 rx_rate_n_flags; + __le32 tx_rate_n_flags; + __le32 t2t3_initiator; + __le32 t1t4_responder; + __le16 common_calib; + __le16 specific_calib; + __le32 papd_calib_output; + u8 rttConfidence; + u8 reserved[3]; +} __packed; /* LOCATION_RANGE_RSP_AP_ETRY_NTFY_API_S_VER_5 */ + +/** + * struct iwl_tof_range_rsp_ap_entry_ntfy_v6 - AP parameters (response) + * @bssid: BSSID of the AP + * @measure_status: current APs measurement status, one of + * &enum iwl_tof_entry_status. + * @measure_bw: Current AP Bandwidth: 0 20MHz, 1 40MHz, 2 80MHz + * @rtt: The Round Trip Time that took for the last measurement for + * current AP [pSec] + * @rtt_variance: The Variance of the RTT values measured for current AP + * @rtt_spread: The Difference between the maximum and the minimum RTT + * values measured for current AP in the current session [pSec] + * @rssi: RSSI as uploaded in the Channel Estimation notification + * @rssi_spread: The Difference between the maximum and the minimum RSSI values + * measured for current AP in the current session + * @last_burst: 1 if no more FTM sessions are scheduled for this responder + * @refusal_period: refusal period in case of + * @IWL_TOF_ENTRY_RESPONDER_CANNOT_COLABORATE [sec] + * @timestamp: The GP2 Clock [usec] where Channel Estimation notification was + * uploaded by the LMAC + * @start_tsf: measurement start time in TSF of the mac specified in the range + * request + * @rx_rate_n_flags: rate and flags of the last FTM frame received from this + * responder + * @tx_rate_n_flags: rate and flags of the last ack sent to this responder + * @t2t3_initiator: as calculated from the algo in the initiator + * @t1t4_responder: as calculated from the algo in the responder + * @common_calib: Calib val that was used in for this AP measurement + * @specific_calib: val that was used in for this AP measurement + * @papd_calib_output: The result of the tof papd calibration that was injected + * into the algorithm. + * @rttConfidence: a value between 0 - 31 that represents the rtt accuracy. + * @reserved: for alignment + * @rx_pn: the last PN used for this responder Rx in case PMF is configured in + * LE byte order. + * @tx_pn: the last PN used for this responder Tx in case PMF is configured in + * LE byte order. + */ +struct iwl_tof_range_rsp_ap_entry_ntfy_v6 { + u8 bssid[ETH_ALEN]; + u8 measure_status; + u8 measure_bw; + __le32 rtt; + __le32 rtt_variance; + __le32 rtt_spread; + s8 rssi; + u8 rssi_spread; + u8 last_burst; + u8 refusal_period; + __le32 timestamp; + __le32 start_tsf; + __le32 rx_rate_n_flags; + __le32 tx_rate_n_flags; + __le32 t2t3_initiator; + __le32 t1t4_responder; + __le16 common_calib; + __le16 specific_calib; + __le32 papd_calib_output; + u8 rttConfidence; + u8 reserved[3]; + u8 rx_pn[IEEE80211_CCMP_PN_LEN]; + u8 tx_pn[IEEE80211_CCMP_PN_LEN]; +} __packed; /* LOCATION_RANGE_RSP_AP_ETRY_NTFY_API_S_VER_6, + LOCATION_RANGE_RSP_AP_ETRY_NTFY_API_S_VER_7 */ + + +/** + * enum iwl_tof_response_status - tof response status + * + * @IWL_TOF_RESPONSE_SUCCESS: successful range. + * @IWL_TOF_RESPONSE_TIMEOUT: request aborted due to timeout expiration. + * partial result of ranges done so far is included in the response. + * @IWL_TOF_RESPONSE_ABORTED: Measurement aborted by command. + * @IWL_TOF_RESPONSE_FAILED: Measurement request command failed. + */ +enum iwl_tof_response_status { + IWL_TOF_RESPONSE_SUCCESS = 0, + IWL_TOF_RESPONSE_TIMEOUT = 1, + IWL_TOF_RESPONSE_ABORTED = 4, + IWL_TOF_RESPONSE_FAILED = 5, +}; /* LOCATION_RNG_RSP_STATUS */ + +/** + * struct iwl_tof_range_rsp_ntfy_v5 - ranging response notification + * @request_id: A Token ID of the corresponding Range request + * @request_status: status of current measurement session, one of + * &enum iwl_tof_response_status. + * @last_in_batch: reprot policy (when not all responses are uploaded at once) + * @num_of_aps: Number of APs to measure (error if > IWL_MVM_TOF_MAX_APS) + * @ap: per-AP data + */ +struct iwl_tof_range_rsp_ntfy_v5 { + u8 request_id; + u8 request_status; + u8 last_in_batch; + u8 num_of_aps; + struct iwl_tof_range_rsp_ap_entry_ntfy_v3 ap[IWL_MVM_TOF_MAX_APS]; +} __packed; /* LOCATION_RANGE_RSP_NTFY_API_S_VER_5 */ + +/** + * struct iwl_tof_range_rsp_ntfy_v6 - ranging response notification + * @request_id: A Token ID of the corresponding Range request + * @num_of_aps: Number of APs results + * @last_report: 1 if no more FTM sessions are scheduled, 0 otherwise. + * @reserved: reserved + * @ap: per-AP data + */ +struct iwl_tof_range_rsp_ntfy_v6 { + u8 request_id; + u8 num_of_aps; + u8 last_report; + u8 reserved; + struct iwl_tof_range_rsp_ap_entry_ntfy_v4 ap[IWL_MVM_TOF_MAX_APS]; +} __packed; /* LOCATION_RANGE_RSP_NTFY_API_S_VER_6 */ + +/** + * struct iwl_tof_range_rsp_ntfy_v7 - ranging response notification + * @request_id: A Token ID of the corresponding Range request + * @num_of_aps: Number of APs results + * @last_report: 1 if no more FTM sessions are scheduled, 0 otherwise. + * @reserved: reserved + * @ap: per-AP data + */ +struct iwl_tof_range_rsp_ntfy_v7 { + u8 request_id; + u8 num_of_aps; + u8 last_report; + u8 reserved; + struct iwl_tof_range_rsp_ap_entry_ntfy_v5 ap[IWL_MVM_TOF_MAX_APS]; +} __packed; /* LOCATION_RANGE_RSP_NTFY_API_S_VER_7 */ + +/** + * struct iwl_tof_range_rsp_ntfy_v8 - ranging response notification + * @request_id: A Token ID of the corresponding Range request + * @num_of_aps: Number of APs results + * @last_report: 1 if no more FTM sessions are scheduled, 0 otherwise. + * @reserved: reserved + * @ap: per-AP data + */ +struct iwl_tof_range_rsp_ntfy_v8 { + u8 request_id; + u8 num_of_aps; + u8 last_report; + u8 reserved; + struct iwl_tof_range_rsp_ap_entry_ntfy_v6 ap[IWL_MVM_TOF_MAX_APS]; +} __packed; /* LOCATION_RANGE_RSP_NTFY_API_S_VER_8, + LOCATION_RANGE_RSP_NTFY_API_S_VER_9 */ + +#define IWL_MVM_TOF_MCSI_BUF_SIZE (245) +/** + * struct iwl_tof_mcsi_notif - used for debug + * @token: token ID for the current session + * @role: '0' - initiator, '1' - responder + * @reserved: reserved + * @initiator_bssid: initiator machine + * @responder_bssid: responder machine + * @mcsi_buffer: debug data + */ +struct iwl_tof_mcsi_notif { + u8 token; + u8 role; + __le16 reserved; + u8 initiator_bssid[ETH_ALEN]; + u8 responder_bssid[ETH_ALEN]; + u8 mcsi_buffer[IWL_MVM_TOF_MCSI_BUF_SIZE * 4]; +} __packed; + +/** + * struct iwl_tof_range_abort_cmd + * @request_id: corresponds to a range request + * @reserved: reserved + */ +struct iwl_tof_range_abort_cmd { + u8 request_id; + u8 reserved[3]; +} __packed; + +enum ftm_responder_stats_flags { + FTM_RESP_STAT_NON_ASAP_STARTED = BIT(0), + FTM_RESP_STAT_NON_ASAP_IN_WIN = BIT(1), + FTM_RESP_STAT_NON_ASAP_OUT_WIN = BIT(2), + FTM_RESP_STAT_TRIGGER_DUP = BIT(3), + FTM_RESP_STAT_DUP = BIT(4), + FTM_RESP_STAT_DUP_IN_WIN = BIT(5), + FTM_RESP_STAT_DUP_OUT_WIN = BIT(6), + FTM_RESP_STAT_SCHED_SUCCESS = BIT(7), + FTM_RESP_STAT_ASAP_REQ = BIT(8), + FTM_RESP_STAT_NON_ASAP_REQ = BIT(9), + FTM_RESP_STAT_ASAP_RESP = BIT(10), + FTM_RESP_STAT_NON_ASAP_RESP = BIT(11), + FTM_RESP_STAT_FAIL_INITIATOR_INACTIVE = BIT(12), + FTM_RESP_STAT_FAIL_INITIATOR_OUT_WIN = BIT(13), + FTM_RESP_STAT_FAIL_INITIATOR_RETRY_LIM = BIT(14), + FTM_RESP_STAT_FAIL_NEXT_SERVED = BIT(15), + FTM_RESP_STAT_FAIL_TRIGGER_ERR = BIT(16), + FTM_RESP_STAT_FAIL_GC = BIT(17), + FTM_RESP_STAT_SUCCESS = BIT(18), + FTM_RESP_STAT_INTEL_IE = BIT(19), + FTM_RESP_STAT_INITIATOR_ACTIVE = BIT(20), + FTM_RESP_STAT_MEASUREMENTS_AVAILABLE = BIT(21), + FTM_RESP_STAT_TRIGGER_UNKNOWN = BIT(22), + FTM_RESP_STAT_PROCESS_FAIL = BIT(23), + FTM_RESP_STAT_ACK = BIT(24), + FTM_RESP_STAT_NACK = BIT(25), + FTM_RESP_STAT_INVALID_INITIATOR_ID = BIT(26), + FTM_RESP_STAT_TIMER_MIN_DELTA = BIT(27), + FTM_RESP_STAT_INITIATOR_REMOVED = BIT(28), + FTM_RESP_STAT_INITIATOR_ADDED = BIT(29), + FTM_RESP_STAT_ERR_LIST_FULL = BIT(30), + FTM_RESP_STAT_INITIATOR_SCHED_NOW = BIT(31), +}; /* RESP_IND_E */ + +/** + * struct iwl_ftm_responder_stats - FTM responder statistics + * @addr: initiator address + * @success_ftm: number of successful ftm frames + * @ftm_per_burst: num of FTM frames that were received + * @flags: &enum ftm_responder_stats_flags + * @duration: actual duration of FTM + * @allocated_duration: time that was allocated for this FTM session + * @bw: FTM request bandwidth + * @rate: FTM request rate + * @reserved: for alingment and future use + */ +struct iwl_ftm_responder_stats { + u8 addr[ETH_ALEN]; + u8 success_ftm; + u8 ftm_per_burst; + __le32 flags; + __le32 duration; + __le32 allocated_duration; + u8 bw; + u8 rate; + __le16 reserved; +} __packed; /* TOF_RESPONDER_STATISTICS_NTFY_S_VER_2 */ + +#define IWL_CSI_MAX_EXPECTED_CHUNKS 16 + +#define IWL_CSI_CHUNK_CTL_NUM_MASK_VER_1 0x0003 +#define IWL_CSI_CHUNK_CTL_IDX_MASK_VER_1 0x000c + +#define IWL_CSI_CHUNK_CTL_NUM_MASK_VER_2 0x00ff +#define IWL_CSI_CHUNK_CTL_IDX_MASK_VER_2 0xff00 + +struct iwl_csi_chunk_notification { + __le32 token; + __le16 seq; + __le16 ctl; + __le32 size; + u8 data[]; +} __packed; /* CSI_CHUNKS_HDR_NTFY_API_S_VER_1/VER_2 */ + +#endif /* __iwl_fw_api_location_h__ */ |