diff options
Diffstat (limited to 'drivers/net/wireless/intel/iwlwifi/fw/api/rs.h')
| -rw-r--r-- | drivers/net/wireless/intel/iwlwifi/fw/api/rs.h | 768 |
1 files changed, 768 insertions, 0 deletions
diff --git a/drivers/net/wireless/intel/iwlwifi/fw/api/rs.h b/drivers/net/wireless/intel/iwlwifi/fw/api/rs.h new file mode 100644 index 000000000..a1a272433 --- /dev/null +++ b/drivers/net/wireless/intel/iwlwifi/fw/api/rs.h @@ -0,0 +1,768 @@ +/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */ +/* + * Copyright (C) 2012-2014, 2018-2022 Intel Corporation + * Copyright (C) 2017 Intel Deutschland GmbH + */ +#ifndef __iwl_fw_api_rs_h__ +#define __iwl_fw_api_rs_h__ + +#include "mac.h" + +/** + * enum iwl_tlc_mng_cfg_flags_enum - options for TLC config flags + * @IWL_TLC_MNG_CFG_FLAGS_STBC_MSK: enable STBC. For HE this enables STBC for + * bandwidths <= 80MHz + * @IWL_TLC_MNG_CFG_FLAGS_LDPC_MSK: enable LDPC + * @IWL_TLC_MNG_CFG_FLAGS_HE_STBC_160MHZ_MSK: enable STBC in HE at 160MHz + * bandwidth + * @IWL_TLC_MNG_CFG_FLAGS_HE_DCM_NSS_1_MSK: enable HE Dual Carrier Modulation + * for BPSK (MCS 0) with 1 spatial + * stream + * @IWL_TLC_MNG_CFG_FLAGS_HE_DCM_NSS_2_MSK: enable HE Dual Carrier Modulation + * for BPSK (MCS 0) with 2 spatial + * streams + * @IWL_TLC_MNG_CFG_FLAGS_EHT_EXTRA_LTF_MSK: enable support for EHT extra LTF + */ +enum iwl_tlc_mng_cfg_flags { + IWL_TLC_MNG_CFG_FLAGS_STBC_MSK = BIT(0), + IWL_TLC_MNG_CFG_FLAGS_LDPC_MSK = BIT(1), + IWL_TLC_MNG_CFG_FLAGS_HE_STBC_160MHZ_MSK = BIT(2), + IWL_TLC_MNG_CFG_FLAGS_HE_DCM_NSS_1_MSK = BIT(3), + IWL_TLC_MNG_CFG_FLAGS_HE_DCM_NSS_2_MSK = BIT(4), + IWL_TLC_MNG_CFG_FLAGS_EHT_EXTRA_LTF_MSK = BIT(6), +}; + +/** + * enum iwl_tlc_mng_cfg_cw - channel width options + * @IWL_TLC_MNG_CH_WIDTH_20MHZ: 20MHZ channel + * @IWL_TLC_MNG_CH_WIDTH_40MHZ: 40MHZ channel + * @IWL_TLC_MNG_CH_WIDTH_80MHZ: 80MHZ channel + * @IWL_TLC_MNG_CH_WIDTH_160MHZ: 160MHZ channel + * @IWL_TLC_MNG_CH_WIDTH_320MHZ: 320MHZ channel + */ +enum iwl_tlc_mng_cfg_cw { + IWL_TLC_MNG_CH_WIDTH_20MHZ, + IWL_TLC_MNG_CH_WIDTH_40MHZ, + IWL_TLC_MNG_CH_WIDTH_80MHZ, + IWL_TLC_MNG_CH_WIDTH_160MHZ, + IWL_TLC_MNG_CH_WIDTH_320MHZ, +}; + +/** + * enum iwl_tlc_mng_cfg_chains - possible chains + * @IWL_TLC_MNG_CHAIN_A_MSK: chain A + * @IWL_TLC_MNG_CHAIN_B_MSK: chain B + */ +enum iwl_tlc_mng_cfg_chains { + IWL_TLC_MNG_CHAIN_A_MSK = BIT(0), + IWL_TLC_MNG_CHAIN_B_MSK = BIT(1), +}; + +/** + * enum iwl_tlc_mng_cfg_mode - supported modes + * @IWL_TLC_MNG_MODE_CCK: enable CCK + * @IWL_TLC_MNG_MODE_OFDM_NON_HT: enable OFDM (non HT) + * @IWL_TLC_MNG_MODE_NON_HT: enable non HT + * @IWL_TLC_MNG_MODE_HT: enable HT + * @IWL_TLC_MNG_MODE_VHT: enable VHT + * @IWL_TLC_MNG_MODE_HE: enable HE + * @IWL_TLC_MNG_MODE_EHT: enable EHT + */ +enum iwl_tlc_mng_cfg_mode { + IWL_TLC_MNG_MODE_CCK = 0, + IWL_TLC_MNG_MODE_OFDM_NON_HT = IWL_TLC_MNG_MODE_CCK, + IWL_TLC_MNG_MODE_NON_HT = IWL_TLC_MNG_MODE_CCK, + IWL_TLC_MNG_MODE_HT, + IWL_TLC_MNG_MODE_VHT, + IWL_TLC_MNG_MODE_HE, + IWL_TLC_MNG_MODE_EHT, +}; + +/** + * enum iwl_tlc_mng_ht_rates - HT/VHT/HE rates + * @IWL_TLC_MNG_HT_RATE_MCS0: index of MCS0 + * @IWL_TLC_MNG_HT_RATE_MCS1: index of MCS1 + * @IWL_TLC_MNG_HT_RATE_MCS2: index of MCS2 + * @IWL_TLC_MNG_HT_RATE_MCS3: index of MCS3 + * @IWL_TLC_MNG_HT_RATE_MCS4: index of MCS4 + * @IWL_TLC_MNG_HT_RATE_MCS5: index of MCS5 + * @IWL_TLC_MNG_HT_RATE_MCS6: index of MCS6 + * @IWL_TLC_MNG_HT_RATE_MCS7: index of MCS7 + * @IWL_TLC_MNG_HT_RATE_MCS8: index of MCS8 + * @IWL_TLC_MNG_HT_RATE_MCS9: index of MCS9 + * @IWL_TLC_MNG_HT_RATE_MCS10: index of MCS10 + * @IWL_TLC_MNG_HT_RATE_MCS11: index of MCS11 + * @IWL_TLC_MNG_HT_RATE_MAX: maximal rate for HT/VHT + */ +enum iwl_tlc_mng_ht_rates { + IWL_TLC_MNG_HT_RATE_MCS0 = 0, + IWL_TLC_MNG_HT_RATE_MCS1, + IWL_TLC_MNG_HT_RATE_MCS2, + IWL_TLC_MNG_HT_RATE_MCS3, + IWL_TLC_MNG_HT_RATE_MCS4, + IWL_TLC_MNG_HT_RATE_MCS5, + IWL_TLC_MNG_HT_RATE_MCS6, + IWL_TLC_MNG_HT_RATE_MCS7, + IWL_TLC_MNG_HT_RATE_MCS8, + IWL_TLC_MNG_HT_RATE_MCS9, + IWL_TLC_MNG_HT_RATE_MCS10, + IWL_TLC_MNG_HT_RATE_MCS11, + IWL_TLC_MNG_HT_RATE_MAX = IWL_TLC_MNG_HT_RATE_MCS11, +}; + +enum IWL_TLC_MNG_NSS { + IWL_TLC_NSS_1, + IWL_TLC_NSS_2, + IWL_TLC_NSS_MAX +}; + +/** + * enum IWL_TLC_MCS_PER_BW - mcs index per BW + * @IWL_TLC_MCS_PER_BW_80: mcs for bw - 20Hhz, 40Hhz, 80Hhz + * @IWL_TLC_MCS_PER_BW_160: mcs for bw - 160Mhz + * @IWL_TLC_MCS_PER_BW_320: mcs for bw - 320Mhz + * @IWL_TLC_MCS_PER_BW_NUM_V3: number of entries up to version 3 + * @IWL_TLC_MCS_PER_BW_NUM_V4: number of entries from version 4 + */ +enum IWL_TLC_MCS_PER_BW { + IWL_TLC_MCS_PER_BW_80, + IWL_TLC_MCS_PER_BW_160, + IWL_TLC_MCS_PER_BW_320, + IWL_TLC_MCS_PER_BW_NUM_V3 = IWL_TLC_MCS_PER_BW_160 + 1, + IWL_TLC_MCS_PER_BW_NUM_V4 = IWL_TLC_MCS_PER_BW_320 + 1, +}; + +/** + * struct iwl_tlc_config_cmd_v3 - TLC configuration + * @sta_id: station id + * @reserved1: reserved + * @max_ch_width: max supported channel width from @enum iwl_tlc_mng_cfg_cw + * @mode: &enum iwl_tlc_mng_cfg_mode + * @chains: bitmask of &enum iwl_tlc_mng_cfg_chains + * @amsdu: TX amsdu is supported + * @flags: bitmask of &enum iwl_tlc_mng_cfg_flags + * @non_ht_rates: bitmap of supported legacy rates + * @ht_rates: bitmap of &enum iwl_tlc_mng_ht_rates, per &enum IWL_TLC_MCS_PER_BW + * <nss, channel-width> pair (0 - 80mhz width and below, 1 - 160mhz). + * @max_mpdu_len: max MPDU length, in bytes + * @sgi_ch_width_supp: bitmap of SGI support per channel width + * use BIT(@enum iwl_tlc_mng_cfg_cw) + * @reserved2: reserved + * @max_tx_op: max TXOP in uSecs for all AC (BK, BE, VO, VI), + * set zero for no limit. + */ +struct iwl_tlc_config_cmd_v3 { + u8 sta_id; + u8 reserved1[3]; + u8 max_ch_width; + u8 mode; + u8 chains; + u8 amsdu; + __le16 flags; + __le16 non_ht_rates; + __le16 ht_rates[IWL_TLC_NSS_MAX][IWL_TLC_MCS_PER_BW_NUM_V3]; + __le16 max_mpdu_len; + u8 sgi_ch_width_supp; + u8 reserved2; + __le32 max_tx_op; +} __packed; /* TLC_MNG_CONFIG_CMD_API_S_VER_3 */ + +/** + * struct iwl_tlc_config_cmd_v4 - TLC configuration + * @sta_id: station id + * @reserved1: reserved + * @max_ch_width: max supported channel width from &enum iwl_tlc_mng_cfg_cw + * @mode: &enum iwl_tlc_mng_cfg_mode + * @chains: bitmask of &enum iwl_tlc_mng_cfg_chains + * @sgi_ch_width_supp: bitmap of SGI support per channel width + * use BIT(&enum iwl_tlc_mng_cfg_cw) + * @flags: bitmask of &enum iwl_tlc_mng_cfg_flags + * @non_ht_rates: bitmap of supported legacy rates + * @ht_rates: bitmap of &enum iwl_tlc_mng_ht_rates, per <nss, channel-width> + * pair (0 - 80mhz width and below, 1 - 160mhz, 2 - 320mhz). + * @max_mpdu_len: max MPDU length, in bytes + * @max_tx_op: max TXOP in uSecs for all AC (BK, BE, VO, VI), + * set zero for no limit. + */ +struct iwl_tlc_config_cmd_v4 { + u8 sta_id; + u8 reserved1[3]; + u8 max_ch_width; + u8 mode; + u8 chains; + u8 sgi_ch_width_supp; + __le16 flags; + __le16 non_ht_rates; + __le16 ht_rates[IWL_TLC_NSS_MAX][IWL_TLC_MCS_PER_BW_NUM_V4]; + __le16 max_mpdu_len; + __le16 max_tx_op; +} __packed; /* TLC_MNG_CONFIG_CMD_API_S_VER_4 */ + +/** + * enum iwl_tlc_update_flags - updated fields + * @IWL_TLC_NOTIF_FLAG_RATE: last initial rate update + * @IWL_TLC_NOTIF_FLAG_AMSDU: umsdu parameters update + */ +enum iwl_tlc_update_flags { + IWL_TLC_NOTIF_FLAG_RATE = BIT(0), + IWL_TLC_NOTIF_FLAG_AMSDU = BIT(1), +}; + +/** + * struct iwl_tlc_update_notif - TLC notification from FW + * @sta_id: station id + * @reserved: reserved + * @flags: bitmap of notifications reported + * @rate: current initial rate + * @amsdu_size: Max AMSDU size, in bytes + * @amsdu_enabled: bitmap for per-TID AMSDU enablement + */ +struct iwl_tlc_update_notif { + u8 sta_id; + u8 reserved[3]; + __le32 flags; + __le32 rate; + __le32 amsdu_size; + __le32 amsdu_enabled; +} __packed; /* TLC_MNG_UPDATE_NTFY_API_S_VER_2 */ + + +#define IWL_MAX_MCS_DISPLAY_SIZE 12 + +struct iwl_rate_mcs_info { + char mbps[IWL_MAX_MCS_DISPLAY_SIZE]; + char mcs[IWL_MAX_MCS_DISPLAY_SIZE]; +}; + +/* + * These serve as indexes into + * struct iwl_rate_info fw_rate_idx_to_plcp[IWL_RATE_COUNT]; + * TODO: avoid overlap between legacy and HT rates + */ +enum { + IWL_RATE_1M_INDEX = 0, + IWL_FIRST_CCK_RATE = IWL_RATE_1M_INDEX, + IWL_RATE_2M_INDEX, + IWL_RATE_5M_INDEX, + IWL_RATE_11M_INDEX, + IWL_LAST_CCK_RATE = IWL_RATE_11M_INDEX, + IWL_RATE_6M_INDEX, + IWL_FIRST_OFDM_RATE = IWL_RATE_6M_INDEX, + IWL_RATE_MCS_0_INDEX = IWL_RATE_6M_INDEX, + IWL_FIRST_HT_RATE = IWL_RATE_MCS_0_INDEX, + IWL_FIRST_VHT_RATE = IWL_RATE_MCS_0_INDEX, + IWL_RATE_9M_INDEX, + IWL_RATE_12M_INDEX, + IWL_RATE_MCS_1_INDEX = IWL_RATE_12M_INDEX, + IWL_RATE_18M_INDEX, + IWL_RATE_MCS_2_INDEX = IWL_RATE_18M_INDEX, + IWL_RATE_24M_INDEX, + IWL_RATE_MCS_3_INDEX = IWL_RATE_24M_INDEX, + IWL_RATE_36M_INDEX, + IWL_RATE_MCS_4_INDEX = IWL_RATE_36M_INDEX, + IWL_RATE_48M_INDEX, + IWL_RATE_MCS_5_INDEX = IWL_RATE_48M_INDEX, + IWL_RATE_54M_INDEX, + IWL_RATE_MCS_6_INDEX = IWL_RATE_54M_INDEX, + IWL_LAST_NON_HT_RATE = IWL_RATE_54M_INDEX, + IWL_RATE_60M_INDEX, + IWL_RATE_MCS_7_INDEX = IWL_RATE_60M_INDEX, + IWL_LAST_HT_RATE = IWL_RATE_MCS_7_INDEX, + IWL_RATE_MCS_8_INDEX, + IWL_RATE_MCS_9_INDEX, + IWL_LAST_VHT_RATE = IWL_RATE_MCS_9_INDEX, + IWL_RATE_MCS_10_INDEX, + IWL_RATE_MCS_11_INDEX, + IWL_LAST_HE_RATE = IWL_RATE_MCS_11_INDEX, + IWL_RATE_COUNT_LEGACY = IWL_LAST_NON_HT_RATE + 1, + IWL_RATE_COUNT = IWL_LAST_HE_RATE + 1, + IWL_RATE_INVM_INDEX = IWL_RATE_COUNT, + IWL_RATE_INVALID = IWL_RATE_COUNT, +}; + +#define IWL_RATE_BIT_MSK(r) BIT(IWL_RATE_##r##M_INDEX) + +/* fw API values for legacy bit rates, both OFDM and CCK */ +enum { + IWL_RATE_6M_PLCP = 13, + IWL_RATE_9M_PLCP = 15, + IWL_RATE_12M_PLCP = 5, + IWL_RATE_18M_PLCP = 7, + IWL_RATE_24M_PLCP = 9, + IWL_RATE_36M_PLCP = 11, + IWL_RATE_48M_PLCP = 1, + IWL_RATE_54M_PLCP = 3, + IWL_RATE_1M_PLCP = 10, + IWL_RATE_2M_PLCP = 20, + IWL_RATE_5M_PLCP = 55, + IWL_RATE_11M_PLCP = 110, + IWL_RATE_INVM_PLCP = -1, +}; + +/* + * rate_n_flags bit fields version 1 + * + * The 32-bit value has different layouts in the low 8 bites depending on the + * format. There are three formats, HT, VHT and legacy (11abg, with subformats + * for CCK and OFDM). + * + * High-throughput (HT) rate format + * bit 8 is 1, bit 26 is 0, bit 9 is 0 (OFDM) + * Very High-throughput (VHT) rate format + * bit 8 is 0, bit 26 is 1, bit 9 is 0 (OFDM) + * Legacy OFDM rate format for bits 7:0 + * bit 8 is 0, bit 26 is 0, bit 9 is 0 (OFDM) + * Legacy CCK rate format for bits 7:0: + * bit 8 is 0, bit 26 is 0, bit 9 is 1 (CCK) + */ + +/* Bit 8: (1) HT format, (0) legacy or VHT format */ +#define RATE_MCS_HT_POS 8 +#define RATE_MCS_HT_MSK_V1 BIT(RATE_MCS_HT_POS) + +/* Bit 9: (1) CCK, (0) OFDM. HT (bit 8) must be "0" for this bit to be valid */ +#define RATE_MCS_CCK_POS_V1 9 +#define RATE_MCS_CCK_MSK_V1 BIT(RATE_MCS_CCK_POS_V1) + +/* Bit 26: (1) VHT format, (0) legacy format in bits 8:0 */ +#define RATE_MCS_VHT_POS_V1 26 +#define RATE_MCS_VHT_MSK_V1 BIT(RATE_MCS_VHT_POS_V1) + + +/* + * High-throughput (HT) rate format for bits 7:0 + * + * 2-0: MCS rate base + * 0) 6 Mbps + * 1) 12 Mbps + * 2) 18 Mbps + * 3) 24 Mbps + * 4) 36 Mbps + * 5) 48 Mbps + * 6) 54 Mbps + * 7) 60 Mbps + * 4-3: 0) Single stream (SISO) + * 1) Dual stream (MIMO) + * 2) Triple stream (MIMO) + * 5: Value of 0x20 in bits 7:0 indicates 6 Mbps HT40 duplicate data + * (bits 7-6 are zero) + * + * Together the low 5 bits work out to the MCS index because we don't + * support MCSes above 15/23, and 0-7 have one stream, 8-15 have two + * streams and 16-23 have three streams. We could also support MCS 32 + * which is the duplicate 20 MHz MCS (bit 5 set, all others zero.) + */ +#define RATE_HT_MCS_RATE_CODE_MSK_V1 0x7 +#define RATE_HT_MCS_NSS_POS_V1 3 +#define RATE_HT_MCS_NSS_MSK_V1 (3 << RATE_HT_MCS_NSS_POS_V1) +#define RATE_HT_MCS_MIMO2_MSK BIT(RATE_HT_MCS_NSS_POS_V1) + +/* Bit 10: (1) Use Green Field preamble */ +#define RATE_HT_MCS_GF_POS 10 +#define RATE_HT_MCS_GF_MSK (1 << RATE_HT_MCS_GF_POS) + +#define RATE_HT_MCS_INDEX_MSK_V1 0x3f + +/* + * Very High-throughput (VHT) rate format for bits 7:0 + * + * 3-0: VHT MCS (0-9) + * 5-4: number of streams - 1: + * 0) Single stream (SISO) + * 1) Dual stream (MIMO) + * 2) Triple stream (MIMO) + */ + +/* Bit 4-5: (0) SISO, (1) MIMO2 (2) MIMO3 */ +#define RATE_VHT_MCS_RATE_CODE_MSK 0xf + +/* + * Legacy OFDM rate format for bits 7:0 + * + * 3-0: 0xD) 6 Mbps + * 0xF) 9 Mbps + * 0x5) 12 Mbps + * 0x7) 18 Mbps + * 0x9) 24 Mbps + * 0xB) 36 Mbps + * 0x1) 48 Mbps + * 0x3) 54 Mbps + * (bits 7-4 are 0) + * + * Legacy CCK rate format for bits 7:0: + * bit 8 is 0, bit 26 is 0, bit 9 is 1 (CCK): + * + * 6-0: 10) 1 Mbps + * 20) 2 Mbps + * 55) 5.5 Mbps + * 110) 11 Mbps + * (bit 7 is 0) + */ +#define RATE_LEGACY_RATE_MSK_V1 0xff + +/* Bit 10 - OFDM HE */ +#define RATE_MCS_HE_POS_V1 10 +#define RATE_MCS_HE_MSK_V1 BIT(RATE_MCS_HE_POS_V1) + +/* + * Bit 11-12: (0) 20MHz, (1) 40MHz, (2) 80MHz, (3) 160MHz + * 0 and 1 are valid for HT and VHT, 2 and 3 only for VHT + */ +#define RATE_MCS_CHAN_WIDTH_POS 11 +#define RATE_MCS_CHAN_WIDTH_MSK_V1 (3 << RATE_MCS_CHAN_WIDTH_POS) + +/* Bit 13: (1) Short guard interval (0.4 usec), (0) normal GI (0.8 usec) */ +#define RATE_MCS_SGI_POS_V1 13 +#define RATE_MCS_SGI_MSK_V1 BIT(RATE_MCS_SGI_POS_V1) + +/* Bit 14-16: Antenna selection (1) Ant A, (2) Ant B, (4) Ant C */ +#define RATE_MCS_ANT_POS 14 +#define RATE_MCS_ANT_A_MSK (1 << RATE_MCS_ANT_POS) +#define RATE_MCS_ANT_B_MSK (2 << RATE_MCS_ANT_POS) +#define RATE_MCS_ANT_AB_MSK (RATE_MCS_ANT_A_MSK | \ + RATE_MCS_ANT_B_MSK) +#define RATE_MCS_ANT_MSK RATE_MCS_ANT_AB_MSK + +/* Bit 17: (0) SS, (1) SS*2 */ +#define RATE_MCS_STBC_POS 17 +#define RATE_MCS_STBC_MSK BIT(RATE_MCS_STBC_POS) + +/* Bit 18: OFDM-HE dual carrier mode */ +#define RATE_HE_DUAL_CARRIER_MODE 18 +#define RATE_HE_DUAL_CARRIER_MODE_MSK BIT(RATE_HE_DUAL_CARRIER_MODE) + +/* Bit 19: (0) Beamforming is off, (1) Beamforming is on */ +#define RATE_MCS_BF_POS 19 +#define RATE_MCS_BF_MSK (1 << RATE_MCS_BF_POS) + +/* + * Bit 20-21: HE LTF type and guard interval + * HE (ext) SU: + * 0 1xLTF+0.8us + * 1 2xLTF+0.8us + * 2 2xLTF+1.6us + * 3 & SGI (bit 13) clear 4xLTF+3.2us + * 3 & SGI (bit 13) set 4xLTF+0.8us + * HE MU: + * 0 4xLTF+0.8us + * 1 2xLTF+0.8us + * 2 2xLTF+1.6us + * 3 4xLTF+3.2us + * HE-EHT TRIG: + * 0 1xLTF+1.6us + * 1 2xLTF+1.6us + * 2 4xLTF+3.2us + * 3 (does not occur) + * EHT MU: + * 0 2xLTF+0.8us + * 1 2xLTF+1.6us + * 2 4xLTF+0.8us + * 3 4xLTF+3.2us + */ +#define RATE_MCS_HE_GI_LTF_POS 20 +#define RATE_MCS_HE_GI_LTF_MSK_V1 (3 << RATE_MCS_HE_GI_LTF_POS) + +/* Bit 22-23: HE type. (0) SU, (1) SU_EXT, (2) MU, (3) trigger based */ +#define RATE_MCS_HE_TYPE_POS_V1 22 +#define RATE_MCS_HE_TYPE_SU_V1 (0 << RATE_MCS_HE_TYPE_POS_V1) +#define RATE_MCS_HE_TYPE_EXT_SU_V1 BIT(RATE_MCS_HE_TYPE_POS_V1) +#define RATE_MCS_HE_TYPE_MU_V1 (2 << RATE_MCS_HE_TYPE_POS_V1) +#define RATE_MCS_HE_TYPE_TRIG_V1 (3 << RATE_MCS_HE_TYPE_POS_V1) +#define RATE_MCS_HE_TYPE_MSK_V1 (3 << RATE_MCS_HE_TYPE_POS_V1) + +/* Bit 24-25: (0) 20MHz (no dup), (1) 2x20MHz, (2) 4x20MHz, 3 8x20MHz */ +#define RATE_MCS_DUP_POS_V1 24 +#define RATE_MCS_DUP_MSK_V1 (3 << RATE_MCS_DUP_POS_V1) + +/* Bit 27: (1) LDPC enabled, (0) LDPC disabled */ +#define RATE_MCS_LDPC_POS_V1 27 +#define RATE_MCS_LDPC_MSK_V1 BIT(RATE_MCS_LDPC_POS_V1) + +/* Bit 28: (1) 106-tone RX (8 MHz RU), (0) normal bandwidth */ +#define RATE_MCS_HE_106T_POS_V1 28 +#define RATE_MCS_HE_106T_MSK_V1 BIT(RATE_MCS_HE_106T_POS_V1) + +/* Bit 30-31: (1) RTS, (2) CTS */ +#define RATE_MCS_RTS_REQUIRED_POS (30) +#define RATE_MCS_RTS_REQUIRED_MSK (0x1 << RATE_MCS_RTS_REQUIRED_POS) + +#define RATE_MCS_CTS_REQUIRED_POS (31) +#define RATE_MCS_CTS_REQUIRED_MSK (0x1 << RATE_MCS_CTS_REQUIRED_POS) + +/* rate_n_flags bit field version 2 + * + * The 32-bit value has different layouts in the low 8 bits depending on the + * format. There are three formats, HT, VHT and legacy (11abg, with subformats + * for CCK and OFDM). + * + */ + +/* Bits 10-8: rate format + * (0) Legacy CCK (1) Legacy OFDM (2) High-throughput (HT) + * (3) Very High-throughput (VHT) (4) High-efficiency (HE) + * (5) Extremely High-throughput (EHT) + */ +#define RATE_MCS_MOD_TYPE_POS 8 +#define RATE_MCS_MOD_TYPE_MSK (0x7 << RATE_MCS_MOD_TYPE_POS) +#define RATE_MCS_CCK_MSK (0 << RATE_MCS_MOD_TYPE_POS) +#define RATE_MCS_LEGACY_OFDM_MSK (1 << RATE_MCS_MOD_TYPE_POS) +#define RATE_MCS_HT_MSK (2 << RATE_MCS_MOD_TYPE_POS) +#define RATE_MCS_VHT_MSK (3 << RATE_MCS_MOD_TYPE_POS) +#define RATE_MCS_HE_MSK (4 << RATE_MCS_MOD_TYPE_POS) +#define RATE_MCS_EHT_MSK (5 << RATE_MCS_MOD_TYPE_POS) + +/* + * Legacy CCK rate format for bits 0:3: + * + * (0) 0xa - 1 Mbps + * (1) 0x14 - 2 Mbps + * (2) 0x37 - 5.5 Mbps + * (3) 0x6e - 11 nbps + * + * Legacy OFDM rate format for bis 3:0: + * + * (0) 6 Mbps + * (1) 9 Mbps + * (2) 12 Mbps + * (3) 18 Mbps + * (4) 24 Mbps + * (5) 36 Mbps + * (6) 48 Mbps + * (7) 54 Mbps + * + */ +#define RATE_LEGACY_RATE_MSK 0x7 + +/* + * HT, VHT, HE, EHT rate format for bits 3:0 + * 3-0: MCS + * + */ +#define RATE_HT_MCS_CODE_MSK 0x7 +#define RATE_MCS_NSS_POS 4 +#define RATE_MCS_NSS_MSK (1 << RATE_MCS_NSS_POS) +#define RATE_MCS_CODE_MSK 0xf +#define RATE_HT_MCS_INDEX(r) ((((r) & RATE_MCS_NSS_MSK) >> 1) | \ + ((r) & RATE_HT_MCS_CODE_MSK)) + +/* Bits 7-5: reserved */ + +/* + * Bits 13-11: (0) 20MHz, (1) 40MHz, (2) 80MHz, (3) 160MHz, (4) 320MHz + */ +#define RATE_MCS_CHAN_WIDTH_MSK (0x7 << RATE_MCS_CHAN_WIDTH_POS) +#define RATE_MCS_CHAN_WIDTH_20_VAL 0 +#define RATE_MCS_CHAN_WIDTH_20 (RATE_MCS_CHAN_WIDTH_20_VAL << RATE_MCS_CHAN_WIDTH_POS) +#define RATE_MCS_CHAN_WIDTH_40_VAL 1 +#define RATE_MCS_CHAN_WIDTH_40 (RATE_MCS_CHAN_WIDTH_40_VAL << RATE_MCS_CHAN_WIDTH_POS) +#define RATE_MCS_CHAN_WIDTH_80_VAL 2 +#define RATE_MCS_CHAN_WIDTH_80 (RATE_MCS_CHAN_WIDTH_80_VAL << RATE_MCS_CHAN_WIDTH_POS) +#define RATE_MCS_CHAN_WIDTH_160_VAL 3 +#define RATE_MCS_CHAN_WIDTH_160 (RATE_MCS_CHAN_WIDTH_160_VAL << RATE_MCS_CHAN_WIDTH_POS) +#define RATE_MCS_CHAN_WIDTH_320_VAL 4 +#define RATE_MCS_CHAN_WIDTH_320 (RATE_MCS_CHAN_WIDTH_320_VAL << RATE_MCS_CHAN_WIDTH_POS) + +/* Bit 15-14: Antenna selection: + * Bit 14: Ant A active + * Bit 15: Ant B active + * + * All relevant definitions are same as in v1 + */ + +/* Bit 16 (1) LDPC enables, (0) LDPC disabled */ +#define RATE_MCS_LDPC_POS 16 +#define RATE_MCS_LDPC_MSK (1 << RATE_MCS_LDPC_POS) + +/* Bit 17: (0) SS, (1) SS*2 (same as v1) */ + +/* Bit 18: OFDM-HE dual carrier mode (same as v1) */ + +/* Bit 19: (0) Beamforming is off, (1) Beamforming is on (same as v1) */ + +/* + * Bit 22-20: HE LTF type and guard interval + * CCK: + * 0 long preamble + * 1 short preamble + * HT/VHT: + * 0 0.8us + * 1 0.4us + * HE (ext) SU: + * 0 1xLTF+0.8us + * 1 2xLTF+0.8us + * 2 2xLTF+1.6us + * 3 4xLTF+3.2us + * 4 4xLTF+0.8us + * HE MU: + * 0 4xLTF+0.8us + * 1 2xLTF+0.8us + * 2 2xLTF+1.6us + * 3 4xLTF+3.2us + * HE TRIG: + * 0 1xLTF+1.6us + * 1 2xLTF+1.6us + * 2 4xLTF+3.2us + * */ +#define RATE_MCS_HE_GI_LTF_MSK (0x7 << RATE_MCS_HE_GI_LTF_POS) +#define RATE_MCS_SGI_POS RATE_MCS_HE_GI_LTF_POS +#define RATE_MCS_SGI_MSK (1 << RATE_MCS_SGI_POS) +#define RATE_MCS_HE_SU_4_LTF 3 +#define RATE_MCS_HE_SU_4_LTF_08_GI 4 + +/* Bit 24-23: HE type. (0) SU, (1) SU_EXT, (2) MU, (3) trigger based */ +#define RATE_MCS_HE_TYPE_POS 23 +#define RATE_MCS_HE_TYPE_SU (0 << RATE_MCS_HE_TYPE_POS) +#define RATE_MCS_HE_TYPE_EXT_SU (1 << RATE_MCS_HE_TYPE_POS) +#define RATE_MCS_HE_TYPE_MU (2 << RATE_MCS_HE_TYPE_POS) +#define RATE_MCS_HE_TYPE_TRIG (3 << RATE_MCS_HE_TYPE_POS) +#define RATE_MCS_HE_TYPE_MSK (3 << RATE_MCS_HE_TYPE_POS) + +/* Bit 25: duplicate channel enabled + * + * if this bit is set, duplicate is according to BW (bits 11-13): + * + * CCK: 2x 20MHz + * OFDM Legacy: N x 20Mhz, (N = BW \ 2 , either 2, 4, 8, 16) + * EHT: 2 x BW/2, (80 - 2x40, 160 - 2x80, 320 - 2x160) + * */ +#define RATE_MCS_DUP_POS 25 +#define RATE_MCS_DUP_MSK (1 << RATE_MCS_DUP_POS) + +/* Bit 26: (1) 106-tone RX (8 MHz RU), (0) normal bandwidth */ +#define RATE_MCS_HE_106T_POS 26 +#define RATE_MCS_HE_106T_MSK (1 << RATE_MCS_HE_106T_POS) + +/* Bit 27: EHT extra LTF: + * instead of 1 LTF for SISO use 2 LTFs, + * instead of 2 LTFs for NSTS=2 use 4 LTFs*/ +#define RATE_MCS_EHT_EXTRA_LTF_POS 27 +#define RATE_MCS_EHT_EXTRA_LTF_MSK (1 << RATE_MCS_EHT_EXTRA_LTF_POS) + +/* Bit 31-28: reserved */ + +/* Link Quality definitions */ + +/* # entries in rate scale table to support Tx retries */ +#define LQ_MAX_RETRY_NUM 16 + +/* Link quality command flags bit fields */ + +/* Bit 0: (0) Don't use RTS (1) Use RTS */ +#define LQ_FLAG_USE_RTS_POS 0 +#define LQ_FLAG_USE_RTS_MSK (1 << LQ_FLAG_USE_RTS_POS) + +/* Bit 1-3: LQ command color. Used to match responses to LQ commands */ +#define LQ_FLAG_COLOR_POS 1 +#define LQ_FLAG_COLOR_MSK (7 << LQ_FLAG_COLOR_POS) +#define LQ_FLAG_COLOR_GET(_f) (((_f) & LQ_FLAG_COLOR_MSK) >>\ + LQ_FLAG_COLOR_POS) +#define LQ_FLAGS_COLOR_INC(_c) ((((_c) + 1) << LQ_FLAG_COLOR_POS) &\ + LQ_FLAG_COLOR_MSK) +#define LQ_FLAG_COLOR_SET(_f, _c) ((_c) | ((_f) & ~LQ_FLAG_COLOR_MSK)) + +/* Bit 4-5: Tx RTS BW Signalling + * (0) No RTS BW signalling + * (1) Static BW signalling + * (2) Dynamic BW signalling + */ +#define LQ_FLAG_RTS_BW_SIG_POS 4 +#define LQ_FLAG_RTS_BW_SIG_NONE (0 << LQ_FLAG_RTS_BW_SIG_POS) +#define LQ_FLAG_RTS_BW_SIG_STATIC (1 << LQ_FLAG_RTS_BW_SIG_POS) +#define LQ_FLAG_RTS_BW_SIG_DYNAMIC (2 << LQ_FLAG_RTS_BW_SIG_POS) + +/* Bit 6: (0) No dynamic BW selection (1) Allow dynamic BW selection + * Dyanmic BW selection allows Tx with narrower BW then requested in rates + */ +#define LQ_FLAG_DYNAMIC_BW_POS 6 +#define LQ_FLAG_DYNAMIC_BW_MSK (1 << LQ_FLAG_DYNAMIC_BW_POS) + +/* Single Stream Tx Parameters (lq_cmd->ss_params) + * Flags to control a smart FW decision about whether BFER/STBC/SISO will be + * used for single stream Tx. + */ + +/* Bit 0-1: Max STBC streams allowed. Can be 0-3. + * (0) - No STBC allowed + * (1) - 2x1 STBC allowed (HT/VHT) + * (2) - 4x2 STBC allowed (HT/VHT) + * (3) - 3x2 STBC allowed (HT only) + * All our chips are at most 2 antennas so only (1) is valid for now. + */ +#define LQ_SS_STBC_ALLOWED_POS 0 +#define LQ_SS_STBC_ALLOWED_MSK (3 << LQ_SS_STBC_ALLOWED_MSK) + +/* 2x1 STBC is allowed */ +#define LQ_SS_STBC_1SS_ALLOWED (1 << LQ_SS_STBC_ALLOWED_POS) + +/* Bit 2: Beamformer (VHT only) is allowed */ +#define LQ_SS_BFER_ALLOWED_POS 2 +#define LQ_SS_BFER_ALLOWED (1 << LQ_SS_BFER_ALLOWED_POS) + +/* Bit 3: Force BFER or STBC for testing + * If this is set: + * If BFER is allowed then force the ucode to choose BFER else + * If STBC is allowed then force the ucode to choose STBC over SISO + */ +#define LQ_SS_FORCE_POS 3 +#define LQ_SS_FORCE (1 << LQ_SS_FORCE_POS) + +/* Bit 31: ss_params field is valid. Used for FW backward compatibility + * with other drivers which don't support the ss_params API yet + */ +#define LQ_SS_PARAMS_VALID_POS 31 +#define LQ_SS_PARAMS_VALID (1 << LQ_SS_PARAMS_VALID_POS) + +/** + * struct iwl_lq_cmd - link quality command + * @sta_id: station to update + * @reduced_tpc: reduced transmit power control value + * @control: not used + * @flags: combination of LQ_FLAG_* + * @mimo_delim: the first SISO index in rs_table, which separates MIMO + * and SISO rates + * @single_stream_ant_msk: best antenna for SISO (can be dual in CDD). + * Should be ANT_[ABC] + * @dual_stream_ant_msk: best antennas for MIMO, combination of ANT_[ABC] + * @initial_rate_index: first index from rs_table per AC category + * @agg_time_limit: aggregation max time threshold in usec/100, meaning + * value of 100 is one usec. Range is 100 to 8000 + * @agg_disable_start_th: try-count threshold for starting aggregation. + * If a frame has higher try-count, it should not be selected for + * starting an aggregation sequence. + * @agg_frame_cnt_limit: max frame count in an aggregation. + * 0: no limit + * 1: no aggregation (one frame per aggregation) + * 2 - 0x3f: maximal number of frames (up to 3f == 63) + * @reserved2: reserved + * @rs_table: array of rates for each TX try, each is rate_n_flags, + * meaning it is a combination of RATE_MCS_* and IWL_RATE_*_PLCP + * @ss_params: single stream features. declare whether STBC or BFER are allowed. + */ +struct iwl_lq_cmd { + u8 sta_id; + u8 reduced_tpc; + __le16 control; + /* LINK_QUAL_GENERAL_PARAMS_API_S_VER_1 */ + u8 flags; + u8 mimo_delim; + u8 single_stream_ant_msk; + u8 dual_stream_ant_msk; + u8 initial_rate_index[AC_NUM]; + /* LINK_QUAL_AGG_PARAMS_API_S_VER_1 */ + __le16 agg_time_limit; + u8 agg_disable_start_th; + u8 agg_frame_cnt_limit; + __le32 reserved2; + __le32 rs_table[LQ_MAX_RETRY_NUM]; + __le32 ss_params; +}; /* LINK_QUALITY_CMD_API_S_VER_1 */ + +u8 iwl_fw_rate_idx_to_plcp(int idx); +u32 iwl_new_rate_from_v1(u32 rate_v1); +const struct iwl_rate_mcs_info *iwl_rate_mcs(int idx); +const char *iwl_rs_pretty_ant(u8 ant); +const char *iwl_rs_pretty_bw(int bw); +int rs_pretty_print_rate(char *buf, int bufsz, const u32 rate); +bool iwl_he_is_sgi(u32 rate_n_flags); + +#endif /* __iwl_fw_api_rs_h__ */ |