13 files changed, 23880 insertions, 0 deletions
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/Kconfig b/drivers/net/wireless/realtek/rtl8xxxu/Kconfig
new file mode 100644
index 0000000000..44ad94757a
--- /dev/null
+++ b/drivers/net/wireless/realtek/rtl8xxxu/Kconfig
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# RTL8XXXU Wireless LAN device configuration
+#
+config RTL8XXXU
+	tristate "Realtek 802.11n USB wireless chips support"
+	depends on MAC80211 && USB
+	depends on LEDS_CLASS
+	help
+	  This is an alternative driver for various Realtek RTL8XXX
+	  parts written to utilize the Linux mac80211 stack.
+	  The driver is known to work with a number of RTL8723AU,
+	  RL8188CU, RTL8188RU, RTL8191CU, RTL8192CU, RTL8723BU, RTL8192EU,
+	  RTL8188FU, RTL8188EU, RTL8710BU (aka RTL8188GU), and RTL8192FU
+	  devices.
+
+	  This driver is under development and has a limited feature
+	  set. In particular it does not yet support 40MHz channels
+	  and power management. However it should have a smaller
+	  memory footprint than the vendor drivers and benefits
+	  from the in kernel mac80211 stack.
+
+	  It can coexist with drivers from drivers/staging/rtl8723au,
+	  drivers/staging/rtl8192u, and drivers/net/wireless/rtlwifi,
+	  but you will need to control which module you wish to load.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called rtl8xxxu.  If unsure, say N.
+
+config RTL8XXXU_UNTESTED
+	bool "Include support for untested Realtek 8xxx USB devices (EXPERIMENTAL)"
+	depends on RTL8XXXU
+	help
+	  This option enables detection of Realtek 8723/8188/8191/8192 WiFi
+	  USB devices which have not been tested directly by the driver
+	  author or reported to be working by third parties.
+
+	  Please report your results!
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/Makefile b/drivers/net/wireless/realtek/rtl8xxxu/Makefile
new file mode 100644
index 0000000000..fa466589ec
--- /dev/null
+++ b/drivers/net/wireless/realtek/rtl8xxxu/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_RTL8XXXU)	+= rtl8xxxu.o
+
+rtl8xxxu-y	:= rtl8xxxu_core.o rtl8xxxu_8192e.o rtl8xxxu_8723b.o \
+		   rtl8xxxu_8723a.o rtl8xxxu_8192c.o rtl8xxxu_8188f.o \
+		   rtl8xxxu_8188e.o rtl8xxxu_8710b.o rtl8xxxu_8192f.o
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
new file mode 100644
index 0000000000..4695fb4e2d
--- /dev/null
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
@@ -0,0 +1,2152 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2014 - 2017 Jes Sorensen <Jes.Sorensen@gmail.com>
+ *
+ * Register definitions taken from original Realtek rtl8723au driver
+ */
+
+#include <asm/byteorder.h>
+
+#define RTL8XXXU_DEBUG_REG_WRITE	0x01
+#define RTL8XXXU_DEBUG_REG_READ		0x02
+#define RTL8XXXU_DEBUG_RFREG_WRITE	0x04
+#define RTL8XXXU_DEBUG_RFREG_READ	0x08
+#define RTL8XXXU_DEBUG_CHANNEL		0x10
+#define RTL8XXXU_DEBUG_TX		0x20
+#define RTL8XXXU_DEBUG_TX_DUMP		0x40
+#define RTL8XXXU_DEBUG_RX		0x80
+#define RTL8XXXU_DEBUG_RX_DUMP		0x100
+#define RTL8XXXU_DEBUG_USB		0x200
+#define RTL8XXXU_DEBUG_KEY		0x400
+#define RTL8XXXU_DEBUG_H2C		0x800
+#define RTL8XXXU_DEBUG_ACTION		0x1000
+#define RTL8XXXU_DEBUG_EFUSE		0x2000
+#define RTL8XXXU_DEBUG_INTERRUPT	0x4000
+
+#define RTW_USB_CONTROL_MSG_TIMEOUT	500
+#define RTL8XXXU_MAX_REG_POLL		500
+#define	USB_INTR_CONTENT_LENGTH		56
+
+#define RTL8XXXU_OUT_ENDPOINTS		6
+
+#define REALTEK_USB_READ		0xc0
+#define REALTEK_USB_WRITE		0x40
+#define REALTEK_USB_CMD_REQ		0x05
+#define REALTEK_USB_CMD_IDX		0x00
+
+#define TX_TOTAL_PAGE_NUM		0xf8
+#define TX_TOTAL_PAGE_NUM_8188F		0xf7
+#define TX_TOTAL_PAGE_NUM_8188E		0xa9
+#define TX_TOTAL_PAGE_NUM_8192E		0xf3
+#define TX_TOTAL_PAGE_NUM_8723B		0xf7
+#define TX_TOTAL_PAGE_NUM_8192F		0xf7
+/* (HPQ + LPQ + NPQ + PUBQ) = TX_TOTAL_PAGE_NUM */
+#define TX_PAGE_NUM_PUBQ		0xe7
+#define TX_PAGE_NUM_HI_PQ		0x0c
+#define TX_PAGE_NUM_LO_PQ		0x02
+#define TX_PAGE_NUM_NORM_PQ		0x02
+
+#define TX_PAGE_NUM_PUBQ_8188F		0xe5
+#define TX_PAGE_NUM_HI_PQ_8188F		0x0c
+#define TX_PAGE_NUM_LO_PQ_8188F		0x02
+#define TX_PAGE_NUM_NORM_PQ_8188F	0x02
+
+#define TX_PAGE_NUM_PUBQ_8188E		0x47
+#define TX_PAGE_NUM_HI_PQ_8188E		0x29
+#define TX_PAGE_NUM_LO_PQ_8188E		0x1c
+#define TX_PAGE_NUM_NORM_PQ_8188E	0x1c
+
+#define TX_PAGE_NUM_PUBQ_8192E		0xe7
+#define TX_PAGE_NUM_HI_PQ_8192E		0x08
+#define TX_PAGE_NUM_LO_PQ_8192E		0x0c
+#define TX_PAGE_NUM_NORM_PQ_8192E	0x00
+
+#define TX_PAGE_NUM_PUBQ_8723B		0xe7
+#define TX_PAGE_NUM_HI_PQ_8723B		0x0c
+#define TX_PAGE_NUM_LO_PQ_8723B		0x02
+#define TX_PAGE_NUM_NORM_PQ_8723B	0x02
+
+#define TX_PAGE_NUM_PUBQ_8192F		0xde
+#define TX_PAGE_NUM_HI_PQ_8192F		0x08
+#define TX_PAGE_NUM_LO_PQ_8192F		0x08
+#define TX_PAGE_NUM_NORM_PQ_8192F	0x08
+
+#define RTL_FW_PAGE_SIZE		4096
+#define RTL8XXXU_FIRMWARE_POLL_MAX	1000
+
+#define RTL8723A_CHANNEL_GROUPS		3
+#define RTL8723A_MAX_RF_PATHS		2
+#define RTL8723B_CHANNEL_GROUPS		6
+#define RTL8723B_TX_COUNT		4
+#define RTL8723B_MAX_RF_PATHS		4
+#define RTL8XXXU_MAX_CHANNEL_GROUPS	6
+#define RF6052_MAX_TX_PWR		0x3f
+
+#define EFUSE_MAP_LEN			512
+#define EFUSE_MAX_SECTION_8723A		64
+#define EFUSE_REAL_CONTENT_LEN_8723A	512
+#define EFUSE_BT_MAP_LEN_8723A		1024
+#define EFUSE_MAX_WORD_UNIT		4
+#define EFUSE_UNDEFINED			0xff
+
+enum rtl8xxxu_rtl_chip {
+	RTL8192S = 0x81920,
+	RTL8191S = 0x81910,
+	RTL8192C = 0x8192c,
+	RTL8191C = 0x8191c,
+	RTL8188C = 0x8188c,
+	RTL8188R = 0x81889,
+	RTL8192D = 0x8192d,
+	RTL8723A = 0x8723a,
+	RTL8188E = 0x8188e,
+	RTL8812  = 0x88120,
+	RTL8821  = 0x88210,
+	RTL8192E = 0x8192e,
+	RTL8191E = 0x8191e,
+	RTL8723B = 0x8723b,
+	RTL8814A = 0x8814a,
+	RTL8881A = 0x8881a,
+	RTL8821B = 0x8821b,
+	RTL8822B = 0x8822b,
+	RTL8703B = 0x8703b,
+	RTL8195A = 0x8195a,
+	RTL8188F = 0x8188f,
+	RTL8710B = 0x8710b,
+	RTL8192F = 0x8192f,
+};
+
+enum rtl8xxxu_rx_type {
+	RX_TYPE_DATA_PKT = 0,
+	RX_TYPE_C2H = 1,
+	RX_TYPE_ERROR = -1
+};
+
+struct rtl8xxxu_rxdesc16 {
+#ifdef __LITTLE_ENDIAN
+	u32 pktlen:14;
+	u32 crc32:1;
+	u32 icverr:1;
+	u32 drvinfo_sz:4;
+	u32 security:3;
+	u32 qos:1;
+	u32 shift:2;
+	u32 phy_stats:1;
+	u32 swdec:1;
+	u32 ls:1;
+	u32 fs:1;
+	u32 eor:1;
+	u32 own:1;
+
+	u32 macid:5;
+	u32 tid:4;
+	u32 hwrsvd:4;
+	u32 amsdu:1;
+	u32 paggr:1;
+	u32 faggr:1;
+	u32 a1fit:4;
+	u32 a2fit:4;
+	u32 pam:1;
+	u32 pwr:1;
+	u32 md:1;
+	u32 mf:1;
+	u32 type:2;
+	u32 mc:1;
+	u32 bc:1;
+
+	u32 seq:12;
+	u32 frag:4;
+	u32 pkt_cnt:8;
+	u32 reserved:6;
+	u32 nextind:1;
+	u32 reserved0:1;
+
+	u32 rxmcs:6;
+	u32 rxht:1;
+	u32 gf:1;
+	u32 splcp:1;
+	u32 bw:1;
+	u32 htc:1;
+	u32 eosp:1;
+	u32 bssidfit:2;
+	u32 rpt_sel:2;		/* 8188e */
+	u32 reserved1:14;
+	u32 unicastwake:1;
+	u32 magicwake:1;
+
+	u32 pattern0match:1;
+	u32 pattern1match:1;
+	u32 pattern2match:1;
+	u32 pattern3match:1;
+	u32 pattern4match:1;
+	u32 pattern5match:1;
+	u32 pattern6match:1;
+	u32 pattern7match:1;
+	u32 pattern8match:1;
+	u32 pattern9match:1;
+	u32 patternamatch:1;
+	u32 patternbmatch:1;
+	u32 patterncmatch:1;
+	u32 reserved2:19;
+#else
+	u32 own:1;
+	u32 eor:1;
+	u32 fs:1;
+	u32 ls:1;
+	u32 swdec:1;
+	u32 phy_stats:1;
+	u32 shift:2;
+	u32 qos:1;
+	u32 security:3;
+	u32 drvinfo_sz:4;
+	u32 icverr:1;
+	u32 crc32:1;
+	u32 pktlen:14;
+
+	u32 bc:1;
+	u32 mc:1;
+	u32 type:2;
+	u32 mf:1;
+	u32 md:1;
+	u32 pwr:1;
+	u32 pam:1;
+	u32 a2fit:4;
+	u32 a1fit:4;
+	u32 faggr:1;
+	u32 paggr:1;
+	u32 amsdu:1;
+	u32 hwrsvd:4;
+	u32 tid:4;
+	u32 macid:5;
+
+	u32 reserved0:1;
+	u32 nextind:1;
+	u32 reserved:6;
+	u32 pkt_cnt:8;
+	u32 frag:4;
+	u32 seq:12;
+
+	u32 magicwake:1;
+	u32 unicastwake:1;
+	u32 reserved1:14;
+	u32 rpt_sel:2;		/* 8188e */
+	u32 bssidfit:2;
+	u32 eosp:1;
+	u32 htc:1;
+	u32 bw:1;
+	u32 splcp:1;
+	u32 gf:1;
+	u32 rxht:1;
+	u32 rxmcs:6;
+
+	u32 reserved2:19;
+	u32 patterncmatch:1;
+	u32 patternbmatch:1;
+	u32 patternamatch:1;
+	u32 pattern9match:1;
+	u32 pattern8match:1;
+	u32 pattern7match:1;
+	u32 pattern6match:1;
+	u32 pattern5match:1;
+	u32 pattern4match:1;
+	u32 pattern3match:1;
+	u32 pattern2match:1;
+	u32 pattern1match:1;
+	u32 pattern0match:1;
+#endif
+	u32 tsfl;
+#if 0
+	u32 bassn:12;
+	u32 bavld:1;
+	u32 reserved3:19;
+#endif
+};
+
+struct rtl8xxxu_rxdesc24 {
+#ifdef __LITTLE_ENDIAN
+	u32 pktlen:14;
+	u32 crc32:1;
+	u32 icverr:1;
+	u32 drvinfo_sz:4;
+	u32 security:3;
+	u32 qos:1;
+	u32 shift:2;
+	u32 phy_stats:1;
+	u32 swdec:1;
+	u32 ls:1;
+	u32 fs:1;
+	u32 eor:1;
+	u32 own:1;
+
+	u32 macid:7;
+	u32 dummy1_0:1;
+	u32 tid:4;
+	u32 dummy1_1:1;
+	u32 amsdu:1;
+	u32 rxid_match:1;
+	u32 paggr:1;
+	u32 a1fit:4;	/* 16 */
+	u32 chkerr:1;
+	u32 ipver:1;
+	u32 tcpudp:1;
+	u32 chkvld:1;
+	u32 pam:1;
+	u32 pwr:1;
+	u32 more_data:1;
+	u32 more_frag:1;
+	u32 type:2;
+	u32 mc:1;
+	u32 bc:1;
+
+	u32 seq:12;
+	u32 frag:4;
+	u32 rx_is_qos:1;	/* 16 */
+	u32 dummy2_0:1;
+	u32 wlanhd_iv_len:6;
+	u32 dummy2_1:4;
+	u32 rpt_sel:1;
+	u32 dummy2_2:3;
+
+	u32 rxmcs:7;
+	u32 dummy3_0:3;
+	u32 htc:1;
+	u32 eosp:1;
+	u32 bssidfit:2;
+	u32 dummy3_1:2;
+	u32 usb_agg_pktnum:8;	/* 16 */
+	u32 dummy3_2:5;
+	u32 pattern_match:1;
+	u32 unicast_match:1;
+	u32 magic_match:1;
+
+	u32 splcp:1;
+	u32 ldcp:1;
+	u32 stbc:1;
+	u32 dummy4_0:1;
+	u32 bw:2;
+	u32 dummy4_1:26;
+#else
+	u32 own:1;
+	u32 eor:1;
+	u32 fs:1;
+	u32 ls:1;
+	u32 swdec:1;
+	u32 phy_stats:1;
+	u32 shift:2;
+	u32 qos:1;
+	u32 security:3;
+	u32 drvinfo_sz:4;
+	u32 icverr:1;
+	u32 crc32:1;
+	u32 pktlen:14;
+
+	u32 bc:1;
+	u32 mc:1;
+	u32 type:2;
+	u32 mf:1;
+	u32 md:1;
+	u32 pwr:1;
+	u32 pam:1;
+	u32 a2fit:4;
+	u32 a1fit:4;
+	u32 faggr:1;
+	u32 paggr:1;
+	u32 amsdu:1;
+	u32 hwrsvd:4;
+	u32 tid:4;
+	u32 macid:5;
+
+	u32 dummy2_2:3;
+	u32 rpt_sel:1;
+	u32 dummy2_1:4;
+	u32 wlanhd_iv_len:6;
+	u32 dummy2_0:1;
+	u32 rx_is_qos:1;
+	u32 frag:4;		/* 16 */
+	u32 seq:12;
+
+	u32 magic_match:1;
+	u32 unicast_match:1;
+	u32 pattern_match:1;
+	u32 dummy3_2:5;
+	u32 usb_agg_pktnum:8;
+	u32 dummy3_1:2;		/* 16 */
+	u32 bssidfit:2;
+	u32 eosp:1;
+	u32 htc:1;
+	u32 dummy3_0:3;
+	u32 rxmcs:7;
+
+	u32 dumm4_1:26;
+	u32 bw:2;
+	u32 dummy4_0:1;
+	u32 stbc:1;
+	u32 ldcp:1;
+	u32 splcp:1;
+#endif
+	u32 tsfl;
+};
+
+struct rtl8xxxu_txdesc32 {
+	__le16 pkt_size;
+	u8 pkt_offset;
+	u8 txdw0;
+	__le32 txdw1;
+	__le32 txdw2;
+	__le32 txdw3;
+	__le32 txdw4;
+	__le32 txdw5;
+	__le32 txdw6;
+	__le16 csum;
+	__le16 txdw7;
+};
+
+struct rtl8xxxu_txdesc40 {
+	__le16 pkt_size;
+	u8 pkt_offset;
+	u8 txdw0;
+	__le32 txdw1;
+	__le32 txdw2;
+	__le32 txdw3;
+	__le32 txdw4;
+	__le32 txdw5;
+	__le32 txdw6;
+	__le16 csum;
+	__le16 txdw7;
+	__le32 txdw8;
+	__le32 txdw9;
+};
+
+/*  CCK Rates, TxHT = 0 */
+#define DESC_RATE_1M			0x00
+#define DESC_RATE_2M			0x01
+#define DESC_RATE_5_5M			0x02
+#define DESC_RATE_11M			0x03
+
+/*  OFDM Rates, TxHT = 0 */
+#define DESC_RATE_6M			0x04
+#define DESC_RATE_9M			0x05
+#define DESC_RATE_12M			0x06
+#define DESC_RATE_18M			0x07
+#define DESC_RATE_24M			0x08
+#define DESC_RATE_36M			0x09
+#define DESC_RATE_48M			0x0a
+#define DESC_RATE_54M			0x0b
+
+/*  MCS Rates, TxHT = 1 */
+#define DESC_RATE_MCS0			0x0c
+#define DESC_RATE_MCS1			0x0d
+#define DESC_RATE_MCS2			0x0e
+#define DESC_RATE_MCS3			0x0f
+#define DESC_RATE_MCS4			0x10
+#define DESC_RATE_MCS5			0x11
+#define DESC_RATE_MCS6			0x12
+#define DESC_RATE_MCS7			0x13
+#define DESC_RATE_MCS8			0x14
+#define DESC_RATE_MCS9			0x15
+#define DESC_RATE_MCS10			0x16
+#define DESC_RATE_MCS11			0x17
+#define DESC_RATE_MCS12			0x18
+#define DESC_RATE_MCS13			0x19
+#define DESC_RATE_MCS14			0x1a
+#define DESC_RATE_MCS15			0x1b
+#define DESC_RATE_MCS15_SG		0x1c
+#define DESC_RATE_MCS32			0x20
+
+#define TXDESC_OFFSET_SZ		0
+#define TXDESC_OFFSET_SHT		16
+#if 0
+#define TXDESC_BMC			BIT(24)
+#define TXDESC_LSG			BIT(26)
+#define TXDESC_FSG			BIT(27)
+#define TXDESC_OWN			BIT(31)
+#else
+#define TXDESC_BROADMULTICAST		BIT(0)
+#define TXDESC_HTC			BIT(1)
+#define TXDESC_LAST_SEGMENT		BIT(2)
+#define TXDESC_FIRST_SEGMENT		BIT(3)
+#define TXDESC_LINIP			BIT(4)
+#define TXDESC_NO_ACM			BIT(5)
+#define TXDESC_GF			BIT(6)
+#define TXDESC_OWN			BIT(7)
+#endif
+
+/* Word 1 */
+/*
+ * Bits 0-7 differ dependent on chip generation. For 8723au bits 5/6 are
+ * aggregation enable and break respectively. For 8723bu, bits 0-7 are macid.
+ */
+#define TXDESC_PKT_OFFSET_SZ		0
+#define TXDESC32_AGG_ENABLE		BIT(5)
+#define TXDESC32_AGG_BREAK		BIT(6)
+#define TXDESC40_MACID_SHIFT		0
+#define TXDESC40_MACID_MASK		0x00f0
+#define TXDESC_QUEUE_SHIFT		8
+#define TXDESC_QUEUE_MASK		0x1f00
+#define TXDESC_QUEUE_BK			0x2
+#define TXDESC_QUEUE_BE			0x0
+#define TXDESC_QUEUE_VI			0x5
+#define TXDESC_QUEUE_VO			0x7
+#define TXDESC_QUEUE_BEACON		0x10
+#define TXDESC_QUEUE_HIGH		0x11
+#define TXDESC_QUEUE_MGNT		0x12
+#define TXDESC_QUEUE_CMD		0x13
+#define TXDESC_QUEUE_MAX		(TXDESC_QUEUE_CMD + 1)
+#define TXDESC40_RDG_NAV_EXT		BIT(13)
+#define TXDESC40_LSIG_TXOP_ENABLE	BIT(14)
+#define TXDESC40_PIFS			BIT(15)
+
+#define DESC_RATE_ID_SHIFT		16
+#define DESC_RATE_ID_MASK		0xf
+#define TXDESC_NAVUSEHDR		BIT(20)
+#define TXDESC_SEC_RC4			0x00400000
+#define TXDESC_SEC_AES			0x00c00000
+#define TXDESC_PKT_OFFSET_SHIFT		26
+#define TXDESC_AGG_EN			BIT(29)
+#define TXDESC_HWPC			BIT(31)
+
+/* Word 2 */
+#define TXDESC40_PAID_SHIFT		0
+#define TXDESC40_PAID_MASK		0x1ff
+#define TXDESC40_CCA_RTS_SHIFT		10
+#define TXDESC40_CCA_RTS_MASK		0xc00
+#define TXDESC40_AGG_ENABLE		BIT(12)
+#define TXDESC40_RDG_ENABLE		BIT(13)
+#define TXDESC40_AGG_BREAK		BIT(16)
+#define TXDESC40_MORE_FRAG		BIT(17)
+#define TXDESC40_RAW			BIT(18)
+#define TXDESC32_ACK_REPORT		BIT(19)
+#define TXDESC40_SPE_RPT		BIT(19)
+#define TXDESC_AMPDU_DENSITY_SHIFT	20
+#define TXDESC40_BT_INT			BIT(23)
+#define TXDESC40_GID_SHIFT		24
+#define TXDESC_ANTENNA_SELECT_A		BIT(24)
+#define TXDESC_ANTENNA_SELECT_B		BIT(25)
+
+/* Word 3 */
+#define TXDESC40_USE_DRIVER_RATE	BIT(8)
+#define TXDESC40_CTS_SELF_ENABLE	BIT(11)
+#define TXDESC40_RTS_CTS_ENABLE		BIT(12)
+#define TXDESC40_HW_RTS_ENABLE		BIT(13)
+#define TXDESC32_SEQ_SHIFT		16
+#define TXDESC32_SEQ_MASK		0x0fff0000
+
+/* Word 4 */
+#define TXDESC32_RTS_RATE_SHIFT		0
+#define TXDESC32_RTS_RATE_MASK		0x3f
+#define TXDESC32_QOS			BIT(6)
+#define TXDESC32_HW_SEQ_ENABLE		BIT(7)
+#define TXDESC32_USE_DRIVER_RATE	BIT(8)
+#define TXDESC_DISABLE_DATA_FB		BIT(10)
+#define TXDESC32_CTS_SELF_ENABLE	BIT(11)
+#define TXDESC32_RTS_CTS_ENABLE		BIT(12)
+#define TXDESC32_HW_RTS_ENABLE		BIT(13)
+#define TXDESC32_PT_STAGE_MASK		GENMASK(17, 15)
+#define TXDESC_PRIME_CH_OFF_LOWER	BIT(20)
+#define TXDESC_PRIME_CH_OFF_UPPER	BIT(21)
+#define TXDESC32_SHORT_PREAMBLE		BIT(24)
+#define TXDESC_DATA_BW			BIT(25)
+#define TXDESC_RTS_DATA_BW		BIT(27)
+#define TXDESC_RTS_PRIME_CH_OFF_LOWER	BIT(28)
+#define TXDESC_RTS_PRIME_CH_OFF_UPPER	BIT(29)
+#define TXDESC40_DATA_RATE_FB_SHIFT	8
+#define TXDESC40_DATA_RATE_FB_MASK	0x00001f00
+#define TXDESC40_RETRY_LIMIT_ENABLE	BIT(17)
+#define TXDESC40_RETRY_LIMIT_SHIFT	18
+#define TXDESC40_RETRY_LIMIT_MASK	0x00fc0000
+#define TXDESC40_RTS_RATE_SHIFT		24
+#define TXDESC40_RTS_RATE_MASK		0x3f000000
+
+/* Word 5 */
+#define TXDESC40_SHORT_PREAMBLE		BIT(4)
+#define TXDESC32_SHORT_GI		BIT(6)
+#define TXDESC_CCX_TAG			BIT(7)
+#define TXDESC32_RETRY_LIMIT_ENABLE	BIT(17)
+#define TXDESC32_RETRY_LIMIT_SHIFT	18
+#define TXDESC32_RETRY_LIMIT_MASK	0x00fc0000
+
+/* Word 6 */
+#define TXDESC_MAX_AGG_SHIFT		11
+#define TXDESC_USB_TX_AGG_SHIT		24
+
+/* Word 7 */
+#define TXDESC_ANTENNA_SELECT_C		BIT(29)
+
+/* Word 8 */
+#define TXDESC40_HW_SEQ_ENABLE		BIT(15)
+
+/* Word 9 */
+#define TXDESC40_SEQ_SHIFT		12
+#define TXDESC40_SEQ_MASK		0x00fff000
+
+struct phy_rx_agc_info {
+#ifdef __LITTLE_ENDIAN
+	u8	gain:7, trsw:1;
+#else
+	u8	trsw:1, gain:7;
+#endif
+};
+
+#define CCK_AGC_RPT_LNA_IDX_MASK	GENMASK(7, 5)
+#define CCK_AGC_RPT_VGA_IDX_MASK	GENMASK(4, 0)
+
+struct rtl8723au_phy_stats {
+	struct phy_rx_agc_info path_agc[RTL8723A_MAX_RF_PATHS];
+	u8	ch_corr[RTL8723A_MAX_RF_PATHS];
+	u8	cck_sig_qual_ofdm_pwdb_all;
+	u8	cck_agc_rpt_ofdm_cfosho_a;
+	u8	cck_rpt_b_ofdm_cfosho_b;
+	u8	reserved_1;
+	u8	noise_power_db_msb;
+	s8	path_cfotail[RTL8723A_MAX_RF_PATHS];
+	u8	pcts_mask[RTL8723A_MAX_RF_PATHS];
+	s8	stream_rxevm[RTL8723A_MAX_RF_PATHS];
+	u8	path_rxsnr[RTL8723A_MAX_RF_PATHS];
+	u8	noise_power_db_lsb;
+	u8	reserved_2[3];
+	u8	stream_csi[RTL8723A_MAX_RF_PATHS];
+	u8	stream_target_csi[RTL8723A_MAX_RF_PATHS];
+	s8	sig_evm;
+	u8	reserved_3;
+
+#ifdef __LITTLE_ENDIAN
+	u8	antsel_rx_keep_2:1;	/* ex_intf_flg:1; */
+	u8	sgi_en:1;
+	u8	rxsc:2;
+	u8	idle_long:1;
+	u8	r_ant_train_en:1;
+	u8	antenna_select_b:1;
+	u8	antenna_select:1;
+#else	/*  _BIG_ENDIAN_ */
+	u8	antenna_select:1;
+	u8	antenna_select_b:1;
+	u8	r_ant_train_en:1;
+	u8	idle_long:1;
+	u8	rxsc:2;
+	u8	sgi_en:1;
+	u8	antsel_rx_keep_2:1;	/* ex_intf_flg:1; */
+#endif
+};
+
+struct jaguar2_phy_stats_type0 {
+	/* DW0 */
+	u8		page_num;
+	u8		pwdb;
+#ifdef __LITTLE_ENDIAN
+	u8		gain: 6;
+	u8		rsvd_0: 1;
+	u8		trsw: 1;
+#else
+	u8		trsw: 1;
+	u8		rsvd_0: 1;
+	u8		gain: 6;
+#endif
+	u8		rsvd_1;
+
+	/* DW1 */
+	u8		rsvd_2;
+#ifdef __LITTLE_ENDIAN
+	u8		rxsc: 4;
+	u8		agc_table: 4;
+#else
+	u8		agc_table: 4;
+	u8		rxsc: 4;
+#endif
+	u8		channel;
+	u8		band;
+
+	/* DW2 */
+	u16		length;
+#ifdef __LITTLE_ENDIAN
+	u8		antidx_a: 3;
+	u8		antidx_b: 3;
+	u8		rsvd_3: 2;
+	u8		antidx_c: 3;
+	u8		antidx_d: 3;
+	u8		rsvd_4:2;
+#else
+	u8		rsvd_3: 2;
+	u8		antidx_b: 3;
+	u8		antidx_a: 3;
+	u8		rsvd_4:2;
+	u8		antidx_d: 3;
+	u8		antidx_c: 3;
+#endif
+
+	/* DW3 */
+	u8		signal_quality;
+#ifdef __LITTLE_ENDIAN
+	u8		vga:5;
+	u8		lna_l:3;
+	u8		bb_power:6;
+	u8		rsvd_9:1;
+	u8		lna_h:1;
+#else
+	u8		lna_l:3;
+	u8		vga:5;
+	u8		lna_h:1;
+	u8		rsvd_9:1;
+	u8		bb_power:6;
+#endif
+	u8		rsvd_5;
+
+	/* DW4 */
+	u32		rsvd_6;
+
+	/* DW5 */
+	u32		rsvd_7;
+
+	/* DW6 */
+	u32		rsvd_8;
+} __packed;
+
+struct jaguar2_phy_stats_type1 {
+	/* DW0 and DW1 */
+	u8		page_num;
+	u8		pwdb[4];
+#ifdef __LITTLE_ENDIAN
+	u8		l_rxsc: 4;
+	u8		ht_rxsc: 4;
+#else
+	u8		ht_rxsc: 4;
+	u8		l_rxsc: 4;
+#endif
+	u8		channel;
+#ifdef __LITTLE_ENDIAN
+	u8		band: 2;
+	u8		rsvd_0: 1;
+	u8		hw_antsw_occu: 1;
+	u8		gnt_bt: 1;
+	u8		ldpc: 1;
+	u8		stbc: 1;
+	u8		beamformed: 1;
+#else
+	u8		beamformed: 1;
+	u8		stbc: 1;
+	u8		ldpc: 1;
+	u8		gnt_bt: 1;
+	u8		hw_antsw_occu: 1;
+	u8		rsvd_0: 1;
+	u8		band: 2;
+#endif
+
+	/* DW2 */
+	u16		lsig_length;
+#ifdef __LITTLE_ENDIAN
+	u8		antidx_a: 3;
+	u8		antidx_b: 3;
+	u8		rsvd_1: 2;
+	u8		antidx_c: 3;
+	u8		antidx_d: 3;
+	u8		rsvd_2: 2;
+#else
+	u8		rsvd_1: 2;
+	u8		antidx_b: 3;
+	u8		antidx_a: 3;
+	u8		rsvd_2: 2;
+	u8		antidx_d: 3;
+	u8		antidx_c: 3;
+#endif
+
+	/* DW3 */
+	u8		paid;
+#ifdef __LITTLE_ENDIAN
+	u8		paid_msb: 1;
+	u8		gid: 6;
+	u8		rsvd_3: 1;
+#else
+	u8		rsvd_3: 1;
+	u8		gid: 6;
+	u8		paid_msb: 1;
+#endif
+	u8		intf_pos;
+#ifdef __LITTLE_ENDIAN
+	u8		intf_pos_msb: 1;
+	u8		rsvd_4: 2;
+	u8		nb_intf_flag: 1;
+	u8		rf_mode: 2;
+	u8		rsvd_5: 2;
+#else
+	u8		rsvd_5: 2;
+	u8		rf_mode: 2;
+	u8		nb_intf_flag: 1;
+	u8		rsvd_4: 2;
+	u8		intf_pos_msb: 1;
+#endif
+
+	/* DW4 */
+	s8		rxevm[4];			/* s(8,1) */
+
+	/* DW5 */
+	s8		cfo_tail[4];			/* s(8,7) */
+
+	/* DW6 */
+	s8		rxsnr[4];			/* s(8,1) */
+} __packed;
+
+struct jaguar2_phy_stats_type2 {
+	/* DW0 ane DW1 */
+	u8		page_num;
+	u8		pwdb[4];
+#ifdef __LITTLE_ENDIAN
+	u8		l_rxsc: 4;
+	u8		ht_rxsc: 4;
+#else
+	u8		ht_rxsc: 4;
+	u8		l_rxsc: 4;
+#endif
+	u8		channel;
+#ifdef __LITTLE_ENDIAN
+	u8		band: 2;
+	u8		rsvd_0: 1;
+	u8		hw_antsw_occu: 1;
+	u8		gnt_bt: 1;
+	u8		ldpc: 1;
+	u8		stbc: 1;
+	u8		beamformed: 1;
+#else
+	u8		beamformed: 1;
+	u8		stbc: 1;
+	u8		ldpc: 1;
+	u8		gnt_bt: 1;
+	u8		hw_antsw_occu: 1;
+	u8		rsvd_0: 1;
+	u8		band: 2;
+#endif
+
+	/* DW2 */
+#ifdef __LITTLE_ENDIAN
+	u8		shift_l_map: 6;
+	u8		rsvd_1: 2;
+#else
+	u8		rsvd_1: 2;
+	u8		shift_l_map: 6;
+#endif
+	u8		cnt_pw2cca;
+#ifdef __LITTLE_ENDIAN
+	u8		agc_table_a: 4;
+	u8		agc_table_b: 4;
+	u8		agc_table_c: 4;
+	u8		agc_table_d: 4;
+#else
+	u8		agc_table_b: 4;
+	u8		agc_table_a: 4;
+	u8		agc_table_d: 4;
+	u8		agc_table_c: 4;
+#endif
+
+	/* DW3 ~ DW6*/
+	u8		cnt_cca2agc_rdy;
+#ifdef __LITTLE_ENDIAN
+	u8		gain_a: 6;
+	u8		rsvd_2: 1;
+	u8		trsw_a: 1;
+	u8		gain_b: 6;
+	u8		rsvd_3: 1;
+	u8		trsw_b: 1;
+	u8		gain_c: 6;
+	u8		rsvd_4: 1;
+	u8		trsw_c: 1;
+	u8		gain_d: 6;
+	u8		rsvd_5: 1;
+	u8		trsw_d: 1;
+	u8		aagc_step_a: 2;
+	u8		aagc_step_b: 2;
+	u8		aagc_step_c: 2;
+	u8		aagc_step_d: 2;
+#else
+	u8		trsw_a: 1;
+	u8		rsvd_2: 1;
+	u8		gain_a: 6;
+	u8		trsw_b: 1;
+	u8		rsvd_3: 1;
+	u8		gain_b: 6;
+	u8		trsw_c: 1;
+	u8		rsvd_4: 1;
+	u8		gain_c: 6;
+	u8		trsw_d: 1;
+	u8		rsvd_5: 1;
+	u8		gain_d: 6;
+	u8		aagc_step_d: 2;
+	u8		aagc_step_c: 2;
+	u8		aagc_step_b: 2;
+	u8		aagc_step_a: 2;
+#endif
+	u8		ht_aagc_gain[4];
+	u8		dagc_gain[4];
+#ifdef __LITTLE_ENDIAN
+	u8		counter: 6;
+	u8		rsvd_6: 2;
+	u8		syn_count: 5;
+	u8		rsvd_7:3;
+#else
+	u8		rsvd_6: 2;
+	u8		counter: 6;
+	u8		rsvd_7:3;
+	u8		syn_count: 5;
+#endif
+} __packed;
+
+/*
+ * Regs to backup
+ */
+#define RTL8XXXU_ADDA_REGS		16
+#define RTL8XXXU_MAC_REGS		4
+#define RTL8XXXU_BB_REGS		9
+
+struct rtl8xxxu_firmware_header {
+	__le16	signature;		/*  92C0: test chip; 92C,
+					    88C0: test chip;
+					    88C1: MP A-cut;
+					    92C1: MP A-cut */
+	u8	category;		/*  AP/NIC and USB/PCI */
+	u8	function;
+
+	__le16	major_version;		/*  FW Version */
+	u8	minor_version;		/*  FW Subversion, default 0x00 */
+	u8	reserved1;
+
+	u8	month;			/*  Release time Month field */
+	u8	date;			/*  Release time Date field */
+	u8	hour;			/*  Release time Hour field */
+	u8	minute;			/*  Release time Minute field */
+
+	__le16	ramcodesize;		/*  Size of RAM code */
+	u16	reserved2;
+
+	__le32	svn_idx;		/*  SVN entry index */
+	u32	reserved3;
+
+	u32	reserved4;
+	u32	reserved5;
+
+	u8	data[];
+};
+
+/*
+ * 8723au/8192cu/8188ru required base power index offset tables.
+ */
+struct rtl8xxxu_power_base {
+	u32 reg_0e00;
+	u32 reg_0e04;
+	u32 reg_0e08;
+	u32 reg_086c;
+
+	u32 reg_0e10;
+	u32 reg_0e14;
+	u32 reg_0e18;
+	u32 reg_0e1c;
+
+	u32 reg_0830;
+	u32 reg_0834;
+	u32 reg_0838;
+	u32 reg_086c_2;
+
+	u32 reg_083c;
+	u32 reg_0848;
+	u32 reg_084c;
+	u32 reg_0868;
+};
+
+/*
+ * The 8723au has 3 channel groups: 1-3, 4-9, and 10-14
+ */
+struct rtl8723au_idx {
+#ifdef __LITTLE_ENDIAN
+	int	a:4;
+	int	b:4;
+#else
+	int	b:4;
+	int	a:4;
+#endif
+} __attribute__((packed));
+
+struct rtl8723au_efuse {
+	__le16 rtl_id;
+	u8 res0[0xe];
+	u8 cck_tx_power_index_A[3];	/* 0x10 */
+	u8 cck_tx_power_index_B[3];
+	u8 ht40_1s_tx_power_index_A[3];	/* 0x16 */
+	u8 ht40_1s_tx_power_index_B[3];
+	/*
+	 * The following entries are half-bytes split as:
+	 * bits 0-3: path A, bits 4-7: path B, all values 4 bits signed
+	 */
+	struct rtl8723au_idx ht20_tx_power_index_diff[3];
+	struct rtl8723au_idx ofdm_tx_power_index_diff[3];
+	struct rtl8723au_idx ht40_max_power_offset[3];
+	struct rtl8723au_idx ht20_max_power_offset[3];
+	u8 channel_plan;		/* 0x28 */
+	u8 tssi_a;
+	u8 thermal_meter;
+	u8 rf_regulatory;
+	u8 rf_option_2;
+	u8 rf_option_3;
+	u8 rf_option_4;
+	u8 res7;
+	u8 version			/* 0x30 */;
+	u8 customer_id_major;
+	u8 customer_id_minor;
+	u8 xtal_k;
+	u8 chipset;			/* 0x34 */
+	u8 res8[0x82];
+	u8 vid;				/* 0xb7 */
+	u8 res9;
+	u8 pid;				/* 0xb9 */
+	u8 res10[0x0c];
+	u8 mac_addr[ETH_ALEN];		/* 0xc6 */
+	u8 res11[2];
+	u8 vendor_name[7];
+	u8 res12[2];
+	u8 device_name[0x29];		/* 0xd7 */
+};
+
+struct rtl8192cu_efuse {
+	__le16 rtl_id;
+	__le16 hpon;
+	u8 res0[2];
+	__le16 clk;
+	__le16 testr;
+	__le16 vid;
+	__le16 did;
+	__le16 svid;
+	__le16 smid;						/* 0x10 */
+	u8 res1[4];
+	u8 mac_addr[ETH_ALEN];					/* 0x16 */
+	u8 res2[2];
+	u8 vendor_name[7];
+	u8 res3[3];
+	u8 device_name[0x14];					/* 0x28 */
+	u8 res4[0x1e];						/* 0x3c */
+	u8 cck_tx_power_index_A[3];				/* 0x5a */
+	u8 cck_tx_power_index_B[3];
+	u8 ht40_1s_tx_power_index_A[3];				/* 0x60 */
+	u8 ht40_1s_tx_power_index_B[3];
+	/*
+	 * The following entries are half-bytes split as:
+	 * bits 0-3: path A, bits 4-7: path B, all values 4 bits signed
+	 */
+	struct rtl8723au_idx ht40_2s_tx_power_index_diff[3];
+	struct rtl8723au_idx ht20_tx_power_index_diff[3];	/* 0x69 */
+	struct rtl8723au_idx ofdm_tx_power_index_diff[3];
+	struct rtl8723au_idx ht40_max_power_offset[3];		/* 0x6f */
+	struct rtl8723au_idx ht20_max_power_offset[3];
+	u8 channel_plan;					/* 0x75 */
+	u8 tssi_a;
+	u8 tssi_b;
+	u8 thermal_meter;	/* xtal_k */			/* 0x78 */
+	u8 rf_regulatory;
+	u8 rf_option_2;
+	u8 rf_option_3;
+	u8 rf_option_4;
+	u8 res5[1];						/* 0x7d */
+	u8 version;
+	u8 customer_id;
+};
+
+struct rtl8723bu_pwr_idx {
+#ifdef __LITTLE_ENDIAN
+	int	ht20:4;
+	int	ht40:4;
+	int	ofdm:4;
+	int	cck:4;
+#else
+	int	cck:4;
+	int	ofdm:4;
+	int	ht40:4;
+	int	ht20:4;
+#endif
+} __attribute__((packed));
+
+struct rtl8723bu_efuse_tx_power {
+	u8 cck_base[6];
+	u8 ht40_base[5];
+	struct rtl8723au_idx ht20_ofdm_1s_diff;
+	struct rtl8723bu_pwr_idx pwr_diff[3];
+	u8 dummy5g[24]; /* max channel group (14) + power diff offset (10) */
+};
+
+struct rtl8723bu_efuse {
+	__le16 rtl_id;
+	u8 res0[0x0e];
+	struct rtl8723bu_efuse_tx_power tx_power_index_A;	/* 0x10 */
+	struct rtl8723bu_efuse_tx_power tx_power_index_B;	/* 0x3a */
+	struct rtl8723bu_efuse_tx_power tx_power_index_C;	/* 0x64 */
+	struct rtl8723bu_efuse_tx_power tx_power_index_D;	/* 0x8e */
+	u8 channel_plan;		/* 0xb8 */
+	u8 xtal_k;
+	u8 thermal_meter;
+	u8 iqk_lck;
+	u8 pa_type;			/* 0xbc */
+	u8 lna_type_2g;			/* 0xbd */
+	u8 res2[3];
+	u8 rf_board_option;
+	u8 rf_feature_option;
+	u8 rf_bt_setting;
+	u8 eeprom_version;
+	u8 eeprom_customer_id;
+	u8 res3[2];
+	u8 tx_pwr_calibrate_rate;
+	u8 rf_antenna_option;		/* 0xc9 */
+	u8 rfe_option;
+	u8 res4[9];
+	u8 usb_optional_function;
+	u8 res5[0x1e];
+	u8 res6[2];
+	u8 serial[0x0b];		/* 0xf5 */
+	u8 vid;				/* 0x100 */
+	u8 res7;
+	u8 pid;
+	u8 res8[4];
+	u8 mac_addr[ETH_ALEN];		/* 0x107 */
+	u8 res9[2];
+	u8 vendor_name[0x07];
+	u8 res10[2];
+	u8 device_name[0x14];
+	u8 res11[0xcf];
+	u8 package_type;		/* 0x1fb */
+	u8 res12[0x4];
+};
+
+struct rtl8192eu_efuse_tx_power {
+	u8 cck_base[6];
+	u8 ht40_base[5];
+	struct rtl8723au_idx ht20_ofdm_1s_diff;
+	struct rtl8723bu_pwr_idx pwr_diff[3];
+	u8 dummy5g[24]; /* max channel group (14) + power diff offset (10) */
+};
+
+struct rtl8192eu_efuse {
+	__le16 rtl_id;
+	u8 res0[0x0e];
+	struct rtl8192eu_efuse_tx_power tx_power_index_A;	/* 0x10 */
+	struct rtl8192eu_efuse_tx_power tx_power_index_B;	/* 0x3a */
+	u8 res2[0x54];
+	u8 channel_plan;		/* 0xb8 */
+	u8 xtal_k;
+	u8 thermal_meter;
+	u8 iqk_lck;
+	u8 pa_type;			/* 0xbc */
+	u8 lna_type_2g;			/* 0xbd */
+	u8 res3[1];
+	u8 lna_type_5g;			/* 0xbf */
+	u8 res4[1];
+	u8 rf_board_option;
+	u8 rf_feature_option;
+	u8 rf_bt_setting;
+	u8 eeprom_version;
+	u8 eeprom_customer_id;
+	u8 res5[3];
+	u8 rf_antenna_option;		/* 0xc9 */
+	u8 res6[6];
+	u8 vid;				/* 0xd0 */
+	u8 res7[1];
+	u8 pid;				/* 0xd2 */
+	u8 res8[1];
+	u8 usb_optional_function;
+	u8 res9[2];
+	u8 mac_addr[ETH_ALEN];		/* 0xd7 */
+	u8 device_info[80];
+	u8 res11[3];
+	u8 unknown[0x0d];		/* 0x130 */
+	u8 res12[0xc3];
+};
+
+struct rtl8188fu_efuse_tx_power {
+	u8 cck_base[6];
+	u8 ht40_base[5];
+	/* a: ofdm; b: ht20 */
+	struct rtl8723au_idx ht20_ofdm_1s_diff;
+};
+
+struct rtl8188fu_efuse {
+	__le16 rtl_id;
+	u8 res0[0x0e];
+	struct rtl8188fu_efuse_tx_power tx_power_index_A;	/* 0x10 */
+	u8 res1[0x9c];			/* 0x1c */
+	u8 channel_plan;		/* 0xb8 */
+	u8 xtal_k;
+	u8 thermal_meter;
+	u8 iqk_lck;
+	u8 res2[5];
+	u8 rf_board_option;
+	u8 rf_feature_option;
+	u8 rf_bt_setting;
+	u8 eeprom_version;
+	u8 eeprom_customer_id;
+	u8 res3[2];
+	u8 kfree_thermal_k_on;
+	u8 rf_antenna_option;		/* 0xc9 */
+	u8 rfe_option;
+	u8 country_code;
+	u8 res4[4];
+	u8 vid;				/* 0xd0 */
+	u8 res5[1];
+	u8 pid;				/* 0xd2 */
+	u8 res6[1];
+	u8 usb_optional_function;
+	u8 res7[2];
+	u8 mac_addr[ETH_ALEN];		/* 0xd7 */
+	u8 res8[2];
+	u8 vendor_name[7];
+	u8 res9[2];
+	u8 device_name[7];		/* 0xe8 */
+	u8 res10[0x41];
+	u8 unknown[0x0d];		/* 0x130 */
+	u8 res11[0xc3];
+};
+
+struct rtl8188eu_efuse {
+	__le16 rtl_id;
+	u8 res0[0x0e];
+	struct rtl8192eu_efuse_tx_power tx_power_index_A;	/* 0x10 */
+	u8 res1[0x7e];			/* 0x3a */
+	u8 channel_plan;		/* 0xb8 */
+	u8 xtal_k;
+	u8 thermal_meter;
+	u8 iqk_lck;
+	u8 res2[5];
+	u8 rf_board_option;
+	u8 rf_feature_option;
+	u8 rf_bt_setting;
+	u8 eeprom_version;
+	u8 eeprom_customer_id;
+	u8 res3[3];
+	u8 rf_antenna_option;		/* 0xc9 */
+	u8 res4[6];
+	u8 vid;				/* 0xd0 */
+	u8 res5[1];
+	u8 pid;				/* 0xd2 */
+	u8 res6[1];
+	u8 usb_optional_function;
+	u8 res7[2];
+	u8 mac_addr[ETH_ALEN];		/* 0xd7 */
+	u8 res8[2];
+	u8 vendor_name[7];
+	u8 res9[2];
+	u8 device_name[0x0b];		/* 0xe8 */
+	u8 res10[2];
+	u8 serial[0x0b];		/* 0xf5 */
+	u8 res11[0x30];
+	u8 unknown[0x0d];		/* 0x130 */
+	u8 res12[0xc3];
+} __packed;
+
+struct rtl8710bu_efuse {
+	__le16 rtl_id;
+	u8 res0[0x1e];
+	struct rtl8188fu_efuse_tx_power tx_power_index_A;	/* 0x20 */
+	u8 res1[0x9c];			/* 0x2c */
+	u8 channel_plan;		/* 0xc8 */
+	u8 xtal_k;			/* 0xc9 */
+	u8 thermal_meter;		/* 0xca */
+	u8 res2[0x4f];
+	u8 mac_addr[ETH_ALEN];		/* 0x11a */
+	u8 res3[0x11];
+	u8 rf_board_option;		/* 0x131 */
+	u8 res4[2];
+	u8 eeprom_version;		/* 0x134 */
+	u8 eeprom_customer_id;		/* 0x135 */
+	u8 res5[5];
+	u8 country_code;		/* 0x13b */
+	u8 res6[0x84];
+	u8 vid[2];			/* 0x1c0 */
+	u8 pid[2];			/* 0x1c2 */
+	u8 res7[0x3c];
+} __packed;
+
+struct rtl8192fu_efuse {
+	__le16 rtl_id;
+	u8 res0[0x0e];
+	struct rtl8192eu_efuse_tx_power tx_power_index_A;	/* 0x10 */
+	struct rtl8192eu_efuse_tx_power tx_power_index_B;	/* 0x3a */
+	u8 res2[0x54];
+	u8 channel_plan;		/* 0xb8 */
+	u8 xtal_k;			/* 0xb9 */
+	u8 thermal_meter;		/* 0xba */
+	u8 iqk_lck;			/* 0xbb */
+	u8 pa_type;			/* 0xbc */
+	u8 lna_type_2g;			/* 0xbd */
+	u8 res3[1];
+	u8 lna_type_5g;			/* 0xbf */
+	u8 res4[1];
+	u8 rf_board_option;		/* 0xc1 */
+	u8 rf_feature_option;		/* 0xc2 */
+	u8 rf_bt_setting;		/* 0xc3 */
+	u8 eeprom_version;		/* 0xc4 */
+	u8 eeprom_customer_id;		/* 0xc5 */
+	u8 res5[3];
+	u8 rf_antenna_option;		/* 0xc9 */
+	u8 rfe_option;			/* 0xca */
+	u8 country_code;		/* 0xcb */
+	u8 res6[52];
+	u8 vid[2];			/* 0x100 */
+	u8 pid[2];			/* 0x102 */
+	u8 usb_optional_function;	/* 0x104 */
+	u8 res7[2];
+	u8 mac_addr[ETH_ALEN];		/* 0x107 */
+	u8 device_info[80];		/* 0x10d */
+	u8 res9[163];
+} __packed;
+
+struct rtl8xxxu_reg8val {
+	u16 reg;
+	u8 val;
+};
+
+struct rtl8xxxu_reg32val {
+	u16 reg;
+	u32 val;
+};
+
+struct rtl8xxxu_rfregval {
+	u8 reg;
+	u32 val;
+};
+
+enum rtl8xxxu_rfpath {
+	RF_A = 0,
+	RF_B = 1,
+};
+
+struct rtl8xxxu_rfregs {
+	u16 hssiparm1;
+	u16 hssiparm2;
+	u16 lssiparm;
+	u16 hspiread;
+	u16 lssiread;
+	u16 rf_sw_ctrl;
+};
+
+#define H2C_MAX_MBOX			4
+#define H2C_EXT				BIT(7)
+#define  H2C_JOIN_BSS_DISCONNECT	0
+#define  H2C_JOIN_BSS_CONNECT		1
+
+#define H2C_MACID_ROLE_STA		1
+#define H2C_MACID_ROLE_AP		2
+
+/*
+ * H2C (firmware) commands differ between the older generation chips
+ * 8188[cr]u, 819[12]cu, and 8723au, and the more recent chips 8723bu,
+ * 8192[de]u, 8192eu, and 8812.
+ */
+enum h2c_cmd_8723a {
+	H2C_SET_POWER_MODE = 1,
+	H2C_JOIN_BSS_REPORT = 2,
+	H2C_SET_RSSI = 5,
+	H2C_SET_RATE_MASK = (6 | H2C_EXT),
+};
+
+enum h2c_cmd_8723b {
+	/*
+	 * Common Class: 000
+	 */
+	H2C_8723B_RSVD_PAGE = 0x00,
+	H2C_8723B_MEDIA_STATUS_RPT = 0x01,
+	H2C_8723B_SCAN_ENABLE = 0x02,
+	H2C_8723B_KEEP_ALIVE = 0x03,
+	H2C_8723B_DISCON_DECISION = 0x04,
+	H2C_8723B_PSD_OFFLOAD = 0x05,
+	H2C_8723B_AP_OFFLOAD = 0x08,
+	H2C_8723B_BCN_RSVDPAGE = 0x09,
+	H2C_8723B_PROBERSP_RSVDPAGE = 0x0A,
+	H2C_8723B_FCS_RSVDPAGE = 0x10,
+	H2C_8723B_FCS_INFO = 0x11,
+	H2C_8723B_AP_WOW_GPIO_CTRL = 0x13,
+
+	/*
+	 * PoweSave Class: 001
+	 */
+	H2C_8723B_SET_PWR_MODE = 0x20,
+	H2C_8723B_PS_TUNING_PARA = 0x21,
+	H2C_8723B_PS_TUNING_PARA2 = 0x22,
+	H2C_8723B_P2P_LPS_PARAM = 0x23,
+	H2C_8723B_P2P_PS_OFFLOAD = 0x24,
+	H2C_8723B_PS_SCAN_ENABLE = 0x25,
+	H2C_8723B_SAP_PS_ = 0x26,
+	H2C_8723B_INACTIVE_PS_ = 0x27,
+	H2C_8723B_FWLPS_IN_IPS_ = 0x28,
+
+	/*
+	 * Dynamic Mechanism Class: 010
+	 */
+	H2C_8723B_MACID_CFG_RAID = 0x40,
+	H2C_8723B_TXBF = 0x41,
+	H2C_8723B_RSSI_SETTING = 0x42,
+	H2C_8723B_AP_REQ_TXRPT = 0x43,
+	H2C_8723B_INIT_RATE_COLLECT = 0x44,
+
+	/*
+	 * BT Class: 011
+	 */
+	H2C_8723B_B_TYPE_TDMA = 0x60,
+	H2C_8723B_BT_INFO = 0x61,
+	H2C_8723B_FORCE_BT_TXPWR = 0x62,
+	H2C_8723B_BT_IGNORE_WLANACT = 0x63,
+	H2C_8723B_DAC_SWING_VALUE = 0x64,
+	H2C_8723B_ANT_SEL_RSV = 0x65,
+	H2C_8723B_WL_OPMODE = 0x66,
+	H2C_8723B_BT_MP_OPER = 0x67,
+	H2C_8723B_BT_CONTROL = 0x68,
+	H2C_8723B_BT_WIFI_CTRL = 0x69,
+	H2C_8723B_BT_FW_PATCH = 0x6a,
+	H2C_8723B_BT_WLAN_CALIBRATION = 0x6d,
+	H2C_8723B_BT_GRANT = 0x6e,
+
+	/*
+	 * WOWLAN Class: 100
+	 */
+	H2C_8723B_WOWLAN = 0x80,
+	H2C_8723B_REMOTE_WAKE_CTRL = 0x81,
+	H2C_8723B_AOAC_GLOBAL_INFO = 0x82,
+	H2C_8723B_AOAC_RSVD_PAGE = 0x83,
+	H2C_8723B_AOAC_RSVD_PAGE2 = 0x84,
+	H2C_8723B_D0_SCAN_OFFLOAD_CTRL = 0x85,
+	H2C_8723B_D0_SCAN_OFFLOAD_INFO = 0x86,
+	H2C_8723B_CHNL_SWITCH_OFFLOAD = 0x87,
+
+	H2C_8723B_RESET_TSF = 0xC0,
+};
+
+
+struct h2c_cmd {
+	union {
+		struct {
+			u8 cmd;
+			u8 data[7];
+		} __packed cmd;
+		struct {
+			__le32 data;
+			__le16 ext;
+		} __packed raw;
+		struct {
+			__le32 data;
+			__le32 ext;
+		} __packed raw_wide;
+		struct {
+			u8 cmd;
+			u8 data;
+		} __packed joinbss;
+		struct {
+			u8 cmd;
+			__le16 mask_hi;
+			u8 arg;
+			__le16 mask_lo;
+		} __packed ramask;
+		struct {
+			u8 cmd;
+			u8 parm;
+			u8 macid;
+			u8 macid_end;
+		} __packed media_status_rpt;
+		struct {
+			u8 cmd;
+			u8 macid;
+			/*
+			 * [0:4] - RAID
+			 * [7]   - SGI
+			 */
+			u8 data1;
+			/*
+			 * [0:1] - Bandwidth
+			 * [3]   - No Update
+			 * [4:5] - VHT enable
+			 * [6]   - DISPT
+			 * [7]   - DISRA
+			 */
+			u8 data2;
+			u8 ramask0;
+			u8 ramask1;
+			u8 ramask2;
+			u8 ramask3;
+		} __packed b_macid_cfg;
+		struct {
+			u8 cmd;
+			u8 data1;
+			u8 data2;
+			u8 data3;
+			u8 data4;
+			u8 data5;
+		} __packed b_type_dma;
+		struct {
+			u8 cmd;
+			u8 data;
+		} __packed bt_info;
+		struct {
+			u8 cmd;
+			u8 operreq;
+			u8 opcode;
+			u8 data;
+			u8 addr;
+		} __packed bt_mp_oper;
+		struct {
+			u8 cmd;
+			u8 data;
+		} __packed bt_wlan_calibration;
+		struct {
+			u8 cmd;
+			u8 data;
+		} __packed ignore_wlan;
+		struct {
+			u8 cmd;
+			u8 ant_inverse;
+			u8 int_switch_type;
+		} __packed ant_sel_rsv;
+		struct {
+			u8 cmd;
+			u8 data;
+		} __packed bt_grant;
+		struct {
+			u8 cmd;
+			u8 macid;
+			u8 unknown0;
+			u8 rssi;
+			/*
+			 * [0]   - is_rx
+			 * [1]   - stbc_en
+			 * [2]   - noisy_decision
+			 * [6]   - bf_en
+			 */
+			u8 data;
+			/*
+			 * [0:6] - ra_th_offset
+			 * [7]   - ra_offset_direction
+			 */
+			u8 ra_th_offset;
+			u8 unknown1;
+			u8 unknown2;
+		} __packed rssi_report;
+	};
+};
+
+enum c2h_evt_8723b {
+	C2H_8723B_DEBUG = 0,
+	C2H_8723B_TSF = 1,
+	C2H_8723B_AP_RPT_RSP = 2,
+	C2H_8723B_CCX_TX_RPT = 3,
+	C2H_8723B_BT_RSSI = 4,
+	C2H_8723B_BT_OP_MODE = 5,
+	C2H_8723B_EXT_RA_RPT = 6,
+	C2H_8723B_BT_INFO = 9,
+	C2H_8723B_HW_INFO_EXCH = 0x0a,
+	C2H_8723B_BT_MP_INFO = 0x0b,
+	C2H_8723B_RA_REPORT = 0x0c,
+	C2H_8723B_FW_DEBUG = 0xff,
+};
+
+enum bt_info_src_8723b {
+	BT_INFO_SRC_8723B_WIFI_FW = 0x0,
+        BT_INFO_SRC_8723B_BT_RSP = 0x1,
+        BT_INFO_SRC_8723B_BT_ACTIVE_SEND = 0x2,
+};
+
+enum bt_mp_oper_opcode_8723b {
+	BT_MP_OP_GET_BT_VERSION	= 0x00,
+	BT_MP_OP_RESET = 0x01,
+	BT_MP_OP_TEST_CTRL = 0x02,
+	BT_MP_OP_SET_BT_MODE = 0x03,
+	BT_MP_OP_SET_CHNL_TX_GAIN = 0x04,
+	BT_MP_OP_SET_PKT_TYPE_LEN = 0x05,
+	BT_MP_OP_SET_PKT_CNT_L_PL_TYPE = 0x06,
+	BT_MP_OP_SET_PKT_CNT_H_PKT_INTV = 0x07,
+	BT_MP_OP_SET_PKT_HEADER = 0x08,
+	BT_MP_OP_SET_WHITENCOEFF = 0x09,
+	BT_MP_OP_SET_BD_ADDR_L = 0x0a,
+	BT_MP_OP_SET_BD_ADDR_H = 0x0b,
+	BT_MP_OP_WRITE_REG_ADDR = 0x0c,
+	BT_MP_OP_WRITE_REG_VALUE = 0x0d,
+	BT_MP_OP_GET_BT_STATUS = 0x0e,
+	BT_MP_OP_GET_BD_ADDR_L = 0x0f,
+	BT_MP_OP_GET_BD_ADDR_H = 0x10,
+	BT_MP_OP_READ_REG = 0x11,
+	BT_MP_OP_SET_TARGET_BD_ADDR_L = 0x12,
+	BT_MP_OP_SET_TARGET_BD_ADDR_H = 0x13,
+	BT_MP_OP_SET_TX_POWER_CALIBRATION = 0x14,
+	BT_MP_OP_GET_RX_PKT_CNT_L = 0x15,
+	BT_MP_OP_GET_RX_PKT_CNT_H = 0x16,
+	BT_MP_OP_GET_RX_ERROR_BITS_L = 0x17,
+	BT_MP_OP_GET_RX_ERROR_BITS_H = 0x18,
+	BT_MP_OP_GET_RSSI = 0x19,
+	BT_MP_OP_GET_CFO_HDR_QUALITY_L = 0x1a,
+	BT_MP_OP_GET_CFO_HDR_QUALITY_H = 0x1b,
+	BT_MP_OP_GET_TARGET_BD_ADDR_L = 0x1c,
+	BT_MP_OP_GET_TARGET_BD_ADDR_H = 0x1d,
+	BT_MP_OP_GET_AFH_MAP_L = 0x1e,
+	BT_MP_OP_GET_AFH_MAP_M = 0x1f,
+	BT_MP_OP_GET_AFH_MAP_H = 0x20,
+	BT_MP_OP_GET_AFH_STATUS = 0x21,
+	BT_MP_OP_SET_TRACKING_INTERVAL = 0x22,
+	BT_MP_OP_SET_THERMAL_METER = 0x23,
+	BT_MP_OP_ENABLE_CFO_TRACKING = 0x24,
+};
+
+enum rtl8xxxu_bw_mode {
+	RTL8XXXU_CHANNEL_WIDTH_20 = 0,
+	RTL8XXXU_CHANNEL_WIDTH_40 = 1,
+	RTL8XXXU_CHANNEL_WIDTH_80 = 2,
+	RTL8XXXU_CHANNEL_WIDTH_160 = 3,
+	RTL8XXXU_CHANNEL_WIDTH_80_80 = 4,
+	RTL8XXXU_CHANNEL_WIDTH_MAX = 5,
+};
+
+struct rtl8723bu_c2h {
+	u8 id;
+	u8 seq;
+	union {
+		struct {
+			u8 payload[0];
+		} __packed raw;
+		struct {
+			u8 ext_id;
+			u8 status:4;
+			u8 retlen:4;
+			u8 opcode_ver:4;
+			u8 req_num:4;
+			u8 payload[2];
+		} __packed bt_mp_info;
+		struct {
+			u8 response_source:4;
+			u8 dummy0_0:4;
+
+			u8 bt_info;
+
+			u8 retry_count:4;
+			u8 dummy2_0:1;
+			u8 bt_page:1;
+			u8 tx_rx_mask:1;
+			u8 dummy2_2:1;
+
+			u8 rssi;
+
+			u8 basic_rate:1;
+			u8 bt_has_reset:1;
+			u8 dummy4_1:1;
+			u8 ignore_wlan:1;
+			u8 auto_report:1;
+			u8 dummy4_2:3;
+
+			u8 a4;
+			u8 a5;
+		} __packed bt_info;
+		struct {
+			u8 rate:7;
+			u8 sgi:1;
+			u8 macid;
+			u8 ldpc:1;
+			u8 txbf:1;
+			u8 noisy_state:1;
+			u8 dummy2_0:5;
+			u8 dummy3_0;
+			u8 dummy4_0;
+			u8 dummy5_0;
+			u8 bw;
+		} __packed ra_report;
+	};
+} __packed;
+
+struct rtl8xxxu_fileops;
+
+/*mlme related.*/
+enum wireless_mode {
+	WIRELESS_MODE_UNKNOWN = 0,
+	/* Sub-Element */
+	WIRELESS_MODE_B = BIT(0),
+	WIRELESS_MODE_G = BIT(1),
+	WIRELESS_MODE_A = BIT(2),
+	WIRELESS_MODE_N_24G = BIT(3),
+	WIRELESS_MODE_N_5G = BIT(4),
+	WIRELESS_AUTO = BIT(5),
+	WIRELESS_MODE_AC = BIT(6),
+	WIRELESS_MODE_MAX = 0x7F,
+};
+
+/* from rtlwifi/wifi.h */
+enum ratr_table_mode_new {
+	RATEID_IDX_BGN_40M_2SS = 0,
+	RATEID_IDX_BGN_40M_1SS = 1,
+	RATEID_IDX_BGN_20M_2SS_BN = 2,
+	RATEID_IDX_BGN_20M_1SS_BN = 3,
+	RATEID_IDX_GN_N2SS = 4,
+	RATEID_IDX_GN_N1SS = 5,
+	RATEID_IDX_BG = 6,
+	RATEID_IDX_G = 7,
+	RATEID_IDX_B = 8,
+	RATEID_IDX_VHT_2SS = 9,
+	RATEID_IDX_VHT_1SS = 10,
+	RATEID_IDX_MIX1 = 11,
+	RATEID_IDX_MIX2 = 12,
+	RATEID_IDX_VHT_3SS = 13,
+	RATEID_IDX_BGN_3SS = 14,
+};
+
+#define BT_INFO_8723B_1ANT_B_FTP		BIT(7)
+#define BT_INFO_8723B_1ANT_B_A2DP		BIT(6)
+#define BT_INFO_8723B_1ANT_B_HID		BIT(5)
+#define BT_INFO_8723B_1ANT_B_SCO_BUSY		BIT(4)
+#define BT_INFO_8723B_1ANT_B_ACL_BUSY		BIT(3)
+#define BT_INFO_8723B_1ANT_B_INQ_PAGE		BIT(2)
+#define BT_INFO_8723B_1ANT_B_SCO_ESCO		BIT(1)
+#define BT_INFO_8723B_1ANT_B_CONNECTION	BIT(0)
+
+enum _BT_8723B_1ANT_STATUS {
+	BT_8723B_1ANT_STATUS_NON_CONNECTED_IDLE      = 0x0,
+	BT_8723B_1ANT_STATUS_CONNECTED_IDLE          = 0x1,
+	BT_8723B_1ANT_STATUS_INQ_PAGE                = 0x2,
+	BT_8723B_1ANT_STATUS_ACL_BUSY                = 0x3,
+	BT_8723B_1ANT_STATUS_SCO_BUSY                = 0x4,
+	BT_8723B_1ANT_STATUS_ACL_SCO_BUSY            = 0x5,
+	BT_8723B_1ANT_STATUS_MAX
+};
+
+struct rtl8xxxu_btcoex {
+	u8      bt_status;
+	bool	bt_busy;
+	bool	has_sco;
+	bool	has_a2dp;
+	bool    has_hid;
+	bool    has_pan;
+	bool	hid_only;
+	bool	a2dp_only;
+	bool    c2h_bt_inquiry;
+};
+
+#define RTL8XXXU_RATR_STA_INIT 0
+#define RTL8XXXU_RATR_STA_HIGH 1
+#define RTL8XXXU_RATR_STA_MID  2
+#define RTL8XXXU_RATR_STA_LOW  3
+
+#define RTL8XXXU_NOISE_FLOOR_MIN	-100
+#define RTL8XXXU_SNR_THRESH_HIGH	50
+#define RTL8XXXU_SNR_THRESH_LOW	20
+
+struct rtl8xxxu_ra_report {
+	struct rate_info txrate;
+	u32 bit_rate;
+	u8 desc_rate;
+};
+
+struct rtl8xxxu_ra_info {
+	u8 rate_id;
+	u32 rate_mask;
+	u32 ra_use_rate;
+	u8 rate_sgi;
+	u8 rssi_sta_ra;		/* Percentage */
+	u8 pre_rssi_sta_ra;
+	u8 sgi_enable;
+	u8 decision_rate;
+	u8 pre_rate;
+	u8 highest_rate;
+	u8 lowest_rate;
+	u32 nsc_up;
+	u32 nsc_down;
+	u32 total;
+	u16 retry[5];
+	u16 drop;
+	u16 rpt_time;
+	u16 pre_min_rpt_time;
+	u8 dynamic_tx_rpt_timing_counter;
+	u8 ra_waiting_counter;
+	u8 ra_pending_counter;
+	u8 ra_drop_after_down;
+	u8 pt_try_state;	/* 0 trying state, 1 for decision state */
+	u8 pt_stage;		/* 0~6 */
+	u8 pt_stop_count;	/* Stop PT counter */
+	u8 pt_pre_rate;		/* if rate change do PT */
+	u8 pt_pre_rssi;		/* if RSSI change 5% do PT */
+	u8 pt_mode_ss;		/* decide which rate should do PT */
+	u8 ra_stage;		/* StageRA, decide how many times RA will be done between PT */
+	u8 pt_smooth_factor;
+};
+
+#define CFO_TH_XTAL_HIGH	20 /* kHz */
+#define CFO_TH_XTAL_LOW	10 /* kHz */
+#define CFO_TH_ATC		80 /* kHz */
+
+struct rtl8xxxu_cfo_tracking {
+	bool adjust;
+	bool atc_status;
+	int cfo_tail[2];
+	u8 crystal_cap;
+	u32 packet_count;
+	u32 packet_count_pre;
+};
+
+#define RTL8XXXU_HW_LED_CONTROL	2
+#define RTL8XXXU_MAX_MAC_ID_NUM	128
+#define RTL8XXXU_BC_MC_MACID	0
+
+struct rtl8xxxu_priv {
+	struct ieee80211_hw *hw;
+	struct usb_device *udev;
+	struct rtl8xxxu_fileops *fops;
+
+	spinlock_t tx_urb_lock;
+	struct list_head tx_urb_free_list;
+	int tx_urb_free_count;
+	bool tx_stopped;
+
+	spinlock_t rx_urb_lock;
+	struct list_head rx_urb_pending_list;
+	int rx_urb_pending_count;
+	bool shutdown;
+	struct work_struct rx_urb_wq;
+
+	u8 mac_addr[ETH_ALEN];
+	char chip_name[8];
+	char chip_vendor[8];
+	u8 cck_tx_power_index_A[RTL8XXXU_MAX_CHANNEL_GROUPS];
+	u8 cck_tx_power_index_B[RTL8XXXU_MAX_CHANNEL_GROUPS];
+	u8 ht40_1s_tx_power_index_A[RTL8XXXU_MAX_CHANNEL_GROUPS];
+	u8 ht40_1s_tx_power_index_B[RTL8XXXU_MAX_CHANNEL_GROUPS];
+	/*
+	 * The following entries are half-bytes split as:
+	 * bits 0-3: path A, bits 4-7: path B, all values 4 bits signed
+	 */
+	struct rtl8723au_idx ht40_2s_tx_power_index_diff[
+		RTL8723A_CHANNEL_GROUPS];
+	struct rtl8723au_idx ht20_tx_power_index_diff[RTL8723A_CHANNEL_GROUPS];
+	struct rtl8723au_idx ofdm_tx_power_index_diff[RTL8723A_CHANNEL_GROUPS];
+	struct rtl8723au_idx ht40_max_power_offset[RTL8723A_CHANNEL_GROUPS];
+	struct rtl8723au_idx ht20_max_power_offset[RTL8723A_CHANNEL_GROUPS];
+	/*
+	 * Newer generation chips only keep power diffs per TX count,
+	 * not per channel group.
+	 */
+	struct rtl8723au_idx ofdm_tx_power_diff[RTL8723B_TX_COUNT];
+	struct rtl8723au_idx ht20_tx_power_diff[RTL8723B_TX_COUNT];
+	struct rtl8723au_idx ht40_tx_power_diff[RTL8723B_TX_COUNT];
+	struct rtl8xxxu_power_base *power_base;
+	u8 package_type;
+	u32 chip_cut:4;
+	u32 rom_rev:4;
+	u32 is_multi_func:1;
+	u32 has_wifi:1;
+	u32 has_bluetooth:1;
+	u32 enable_bluetooth:1;
+	u32 has_gps:1;
+	u32 hi_pa:1;
+	u32 vendor_umc:1;
+	u32 vendor_smic:1;
+	u32 has_polarity_ctrl:1;
+	u32 has_eeprom:1;
+	u32 boot_eeprom:1;
+	u32 usb_interrupts:1;
+	u32 ep_tx_high_queue:1;
+	u32 ep_tx_normal_queue:1;
+	u32 ep_tx_low_queue:1;
+	u32 rx_buf_aggregation:1;
+	u32 cck_agc_report_type:1;
+	u32 cck_new_agc:1;
+	u8 default_crystal_cap;
+	u8 rfe_type;
+	unsigned int pipe_interrupt;
+	unsigned int pipe_in;
+	unsigned int pipe_out[TXDESC_QUEUE_MAX];
+	u8 out_ep[RTL8XXXU_OUT_ENDPOINTS];
+	u8 ep_tx_count;
+	u8 rf_paths;
+	u8 rx_paths;
+	u8 tx_paths;
+	u32 rege94;
+	u32 rege9c;
+	u32 regeb4;
+	u32 regebc;
+	u32 regrcr;
+	int next_mbox;
+	int nr_out_eps;
+
+	struct mutex h2c_mutex;
+	/* Protect the indirect register accesses of RTL8710BU. */
+	struct mutex syson_indirect_access_mutex;
+
+	struct usb_anchor rx_anchor;
+	struct usb_anchor tx_anchor;
+	struct usb_anchor int_anchor;
+	struct rtl8xxxu_firmware_header *fw_data;
+	size_t fw_size;
+	struct mutex usb_buf_mutex;
+	union {
+		__le32 val32;
+		__le16 val16;
+		u8 val8;
+	} usb_buf;
+	union {
+		u8 raw[EFUSE_MAP_LEN];
+		struct rtl8723au_efuse efuse8723;
+		struct rtl8723bu_efuse efuse8723bu;
+		struct rtl8192cu_efuse efuse8192;
+		struct rtl8192eu_efuse efuse8192eu;
+		struct rtl8188fu_efuse efuse8188fu;
+		struct rtl8188eu_efuse efuse8188eu;
+		struct rtl8710bu_efuse efuse8710bu;
+		struct rtl8192fu_efuse efuse8192fu;
+	} efuse_wifi;
+	u32 adda_backup[RTL8XXXU_ADDA_REGS];
+	u32 mac_backup[RTL8XXXU_MAC_REGS];
+	u32 bb_backup[RTL8XXXU_BB_REGS];
+	u32 bb_recovery_backup[RTL8XXXU_BB_REGS];
+	enum rtl8xxxu_rtl_chip rtl_chip;
+	u8 pi_enabled:1;
+	u8 no_pape:1;
+	u8 int_buf[USB_INTR_CONTENT_LENGTH];
+	u8 rssi_level;
+	DECLARE_BITMAP(tx_aggr_started, IEEE80211_NUM_TIDS);
+	DECLARE_BITMAP(tid_tx_operational, IEEE80211_NUM_TIDS);
+	/*
+	 * Only one virtual interface permitted because only STA mode
+	 * is supported and no iface_combinations are provided.
+	 */
+	struct ieee80211_vif *vif;
+	struct delayed_work ra_watchdog;
+	struct work_struct c2hcmd_work;
+	struct sk_buff_head c2hcmd_queue;
+	struct work_struct update_beacon_work;
+	struct rtl8xxxu_btcoex bt_coex;
+	struct rtl8xxxu_ra_report ra_report;
+	struct rtl8xxxu_cfo_tracking cfo_tracking;
+	struct rtl8xxxu_ra_info ra_info;
+
+	bool led_registered;
+	char led_name[32];
+	struct led_classdev led_cdev;
+	DECLARE_BITMAP(mac_id_map, RTL8XXXU_MAX_MAC_ID_NUM);
+};
+
+struct rtl8xxxu_sta_info {
+	struct ieee80211_sta *sta;
+	struct ieee80211_vif *vif;
+
+	u8 macid;
+};
+
+struct rtl8xxxu_rx_urb {
+	struct urb urb;
+	struct ieee80211_hw *hw;
+	struct list_head list;
+};
+
+struct rtl8xxxu_tx_urb {
+	struct urb urb;
+	struct ieee80211_hw *hw;
+	struct list_head list;
+};
+
+struct rtl8xxxu_fileops {
+	int (*identify_chip) (struct rtl8xxxu_priv *priv);
+	int (*read_efuse) (struct rtl8xxxu_priv *priv);
+	int (*parse_efuse) (struct rtl8xxxu_priv *priv);
+	int (*load_firmware) (struct rtl8xxxu_priv *priv);
+	int (*power_on) (struct rtl8xxxu_priv *priv);
+	void (*power_off) (struct rtl8xxxu_priv *priv);
+	void (*reset_8051) (struct rtl8xxxu_priv *priv);
+	int (*llt_init) (struct rtl8xxxu_priv *priv);
+	void (*init_phy_bb) (struct rtl8xxxu_priv *priv);
+	int (*init_phy_rf) (struct rtl8xxxu_priv *priv);
+	void (*phy_init_antenna_selection) (struct rtl8xxxu_priv *priv);
+	void (*phy_lc_calibrate) (struct rtl8xxxu_priv *priv);
+	void (*phy_iq_calibrate) (struct rtl8xxxu_priv *priv);
+	void (*config_channel) (struct ieee80211_hw *hw);
+	int (*parse_rx_desc) (struct rtl8xxxu_priv *priv, struct sk_buff *skb);
+	void (*parse_phystats) (struct rtl8xxxu_priv *priv,
+				struct ieee80211_rx_status *rx_status,
+				struct rtl8723au_phy_stats *phy_stats,
+				u32 rxmcs, struct ieee80211_hdr *hdr,
+				bool crc_icv_err);
+	void (*init_aggregation) (struct rtl8xxxu_priv *priv);
+	void (*init_statistics) (struct rtl8xxxu_priv *priv);
+	void (*init_burst) (struct rtl8xxxu_priv *priv);
+	void (*enable_rf) (struct rtl8xxxu_priv *priv);
+	void (*disable_rf) (struct rtl8xxxu_priv *priv);
+	void (*usb_quirks) (struct rtl8xxxu_priv *priv);
+	void (*set_tx_power) (struct rtl8xxxu_priv *priv, int channel,
+			      bool ht40);
+	void (*update_rate_mask) (struct rtl8xxxu_priv *priv,
+				  u32 ramask, u8 rateid, int sgi, int txbw_40mhz,
+				  u8 macid);
+	void (*report_connect) (struct rtl8xxxu_priv *priv,
+				u8 macid, u8 role, bool connect);
+	void (*report_rssi) (struct rtl8xxxu_priv *priv, u8 macid, u8 rssi);
+	void (*fill_txdesc) (struct ieee80211_hw *hw, struct ieee80211_hdr *hdr,
+			     struct ieee80211_tx_info *tx_info,
+			     struct rtl8xxxu_txdesc32 *tx_desc, bool sgi,
+			     bool short_preamble, bool ampdu_enable,
+			     u32 rts_rate, u8 macid);
+	void (*set_crystal_cap) (struct rtl8xxxu_priv *priv, u8 crystal_cap);
+	s8 (*cck_rssi) (struct rtl8xxxu_priv *priv, struct rtl8723au_phy_stats *phy_stats);
+	int (*led_classdev_brightness_set) (struct led_classdev *led_cdev,
+					    enum led_brightness brightness);
+	int writeN_block_size;
+	int rx_agg_buf_size;
+	char tx_desc_size;
+	char rx_desc_size;
+	u8 has_s0s1:1;
+	u8 has_tx_report:1;
+	u8 gen2_thermal_meter:1;
+	u8 needs_full_init:1;
+	u8 init_reg_rxfltmap:1;
+	u8 init_reg_pkt_life_time:1;
+	u8 init_reg_hmtfr:1;
+	u8 ampdu_max_time;
+	u8 ustime_tsf_edca;
+	u16 max_aggr_num;
+	u8 supports_ap:1;
+	u16 max_macid_num;
+	u32 adda_1t_init;
+	u32 adda_1t_path_on;
+	u32 adda_2t_path_on_a;
+	u32 adda_2t_path_on_b;
+	u16 trxff_boundary;
+	u8 pbp_rx;
+	u8 pbp_tx;
+	const struct rtl8xxxu_reg8val *mactable;
+	u8 total_page_num;
+	u8 page_num_hi;
+	u8 page_num_lo;
+	u8 page_num_norm;
+	u8 last_llt_entry;
+};
+
+extern int rtl8xxxu_debug;
+
+extern const struct rtl8xxxu_reg8val rtl8xxxu_gen1_mac_init_table[];
+extern const u32 rtl8xxxu_iqk_phy_iq_bb_reg[];
+u8 rtl8xxxu_read8(struct rtl8xxxu_priv *priv, u16 addr);
+u16 rtl8xxxu_read16(struct rtl8xxxu_priv *priv, u16 addr);
+u32 rtl8xxxu_read32(struct rtl8xxxu_priv *priv, u16 addr);
+int rtl8xxxu_write8(struct rtl8xxxu_priv *priv, u16 addr, u8 val);
+int rtl8xxxu_write16(struct rtl8xxxu_priv *priv, u16 addr, u16 val);
+int rtl8xxxu_write32(struct rtl8xxxu_priv *priv, u16 addr, u32 val);
+int rtl8xxxu_write8_set(struct rtl8xxxu_priv *priv, u16 addr, u8 bits);
+int rtl8xxxu_write8_clear(struct rtl8xxxu_priv *priv, u16 addr, u8 bits);
+int rtl8xxxu_write16_set(struct rtl8xxxu_priv *priv, u16 addr, u16 bits);
+int rtl8xxxu_write16_clear(struct rtl8xxxu_priv *priv, u16 addr, u16 bits);
+int rtl8xxxu_write32_set(struct rtl8xxxu_priv *priv, u16 addr, u32 bits);
+int rtl8xxxu_write32_clear(struct rtl8xxxu_priv *priv, u16 addr, u32 bits);
+int rtl8xxxu_write32_mask(struct rtl8xxxu_priv *priv, u16 addr,
+			  u32 mask, u32 val);
+
+u32 rtl8xxxu_read_rfreg(struct rtl8xxxu_priv *priv,
+			enum rtl8xxxu_rfpath path, u8 reg);
+int rtl8xxxu_write_rfreg(struct rtl8xxxu_priv *priv,
+			 enum rtl8xxxu_rfpath path, u8 reg, u32 data);
+int rtl8xxxu_write_rfreg_mask(struct rtl8xxxu_priv *priv,
+			      enum rtl8xxxu_rfpath path, u8 reg,
+			      u32 mask, u32 val);
+void rtl8xxxu_save_regs(struct rtl8xxxu_priv *priv, const u32 *regs,
+			u32 *backup, int count);
+void rtl8xxxu_restore_regs(struct rtl8xxxu_priv *priv, const u32 *regs,
+			   u32 *backup, int count);
+void rtl8xxxu_save_mac_regs(struct rtl8xxxu_priv *priv,
+			    const u32 *reg, u32 *backup);
+void rtl8xxxu_restore_mac_regs(struct rtl8xxxu_priv *priv,
+			       const u32 *reg, u32 *backup);
+void rtl8xxxu_path_adda_on(struct rtl8xxxu_priv *priv, const u32 *regs,
+			   bool path_a_on);
+void rtl8xxxu_mac_calibration(struct rtl8xxxu_priv *priv,
+			      const u32 *regs, u32 *backup);
+void rtl8xxxu_fill_iqk_matrix_a(struct rtl8xxxu_priv *priv, bool iqk_ok,
+				int result[][8], int candidate, bool tx_only);
+void rtl8xxxu_fill_iqk_matrix_b(struct rtl8xxxu_priv *priv, bool iqk_ok,
+				int result[][8], int candidate, bool tx_only);
+int rtl8xxxu_init_phy_rf(struct rtl8xxxu_priv *priv,
+			 const struct rtl8xxxu_rfregval *table,
+			 enum rtl8xxxu_rfpath path);
+int rtl8xxxu_init_phy_regs(struct rtl8xxxu_priv *priv,
+			   const struct rtl8xxxu_reg32val *array);
+int rtl8xxxu_load_firmware(struct rtl8xxxu_priv *priv, const char *fw_name);
+void rtl8xxxu_firmware_self_reset(struct rtl8xxxu_priv *priv);
+void rtl8xxxu_power_off(struct rtl8xxxu_priv *priv);
+void rtl8xxxu_identify_vendor_1bit(struct rtl8xxxu_priv *priv, u32 vendor);
+void rtl8xxxu_identify_vendor_2bits(struct rtl8xxxu_priv *priv, u32 vendor);
+void rtl8xxxu_config_endpoints_sie(struct rtl8xxxu_priv *priv);
+int rtl8xxxu_config_endpoints_no_sie(struct rtl8xxxu_priv *priv);
+int rtl8xxxu_read_efuse8(struct rtl8xxxu_priv *priv, u16 offset, u8 *data);
+int rtl8xxxu_read_efuse(struct rtl8xxxu_priv *priv);
+void rtl8xxxu_reset_8051(struct rtl8xxxu_priv *priv);
+int rtl8xxxu_auto_llt_table(struct rtl8xxxu_priv *priv);
+void rtl8xxxu_gen2_prepare_calibrate(struct rtl8xxxu_priv *priv, u8 start);
+void rtl8723a_phy_lc_calibrate(struct rtl8xxxu_priv *priv);
+void rtl8188f_phy_lc_calibrate(struct rtl8xxxu_priv *priv);
+int rtl8xxxu_flush_fifo(struct rtl8xxxu_priv *priv);
+int rtl8xxxu_gen2_h2c_cmd(struct rtl8xxxu_priv *priv,
+			  struct h2c_cmd *h2c, int len);
+int rtl8xxxu_active_to_lps(struct rtl8xxxu_priv *priv);
+void rtl8xxxu_disabled_to_emu(struct rtl8xxxu_priv *priv);
+int rtl8xxxu_init_llt_table(struct rtl8xxxu_priv *priv);
+void rtl8xxxu_gen1_phy_iq_calibrate(struct rtl8xxxu_priv *priv);
+void rtl8xxxu_gen1_init_phy_bb(struct rtl8xxxu_priv *priv);
+void rtl8xxxu_gen1_set_tx_power(struct rtl8xxxu_priv *priv,
+				int channel, bool ht40);
+void rtl8188f_channel_to_group(int channel, int *group, int *cck_group);
+void rtl8188f_set_tx_power(struct rtl8xxxu_priv *priv,
+			   int channel, bool ht40);
+void rtl8xxxu_gen1_config_channel(struct ieee80211_hw *hw);
+void rtl8xxxu_gen2_config_channel(struct ieee80211_hw *hw);
+void rtl8xxxu_gen1_usb_quirks(struct rtl8xxxu_priv *priv);
+void rtl8xxxu_gen2_usb_quirks(struct rtl8xxxu_priv *priv);
+void rtl8xxxu_update_rate_mask(struct rtl8xxxu_priv *priv,
+			       u32 ramask, u8 rateid, int sgi, int txbw_40mhz, u8 macid);
+void rtl8xxxu_gen2_update_rate_mask(struct rtl8xxxu_priv *priv,
+				    u32 ramask, u8 rateid, int sgi, int txbw_40mhz, u8 macid);
+void rtl8xxxu_gen1_report_connect(struct rtl8xxxu_priv *priv,
+				  u8 macid, u8 role, bool connect);
+void rtl8xxxu_gen2_report_connect(struct rtl8xxxu_priv *priv,
+				  u8 macid, u8 role, bool connect);
+void rtl8xxxu_gen1_report_rssi(struct rtl8xxxu_priv *priv, u8 macid, u8 rssi);
+void rtl8xxxu_gen2_report_rssi(struct rtl8xxxu_priv *priv, u8 macid, u8 rssi);
+void rtl8xxxu_gen1_init_aggregation(struct rtl8xxxu_priv *priv);
+void rtl8xxxu_gen1_enable_rf(struct rtl8xxxu_priv *priv);
+void rtl8xxxu_gen1_disable_rf(struct rtl8xxxu_priv *priv);
+void rtl8xxxu_gen2_disable_rf(struct rtl8xxxu_priv *priv);
+void rtl8xxxu_init_burst(struct rtl8xxxu_priv *priv);
+int rtl8xxxu_parse_rxdesc16(struct rtl8xxxu_priv *priv, struct sk_buff *skb);
+int rtl8xxxu_parse_rxdesc24(struct rtl8xxxu_priv *priv, struct sk_buff *skb);
+void rtl8723au_rx_parse_phystats(struct rtl8xxxu_priv *priv,
+				 struct ieee80211_rx_status *rx_status,
+				 struct rtl8723au_phy_stats *phy_stats,
+				 u32 rxmcs, struct ieee80211_hdr *hdr,
+				 bool crc_icv_err);
+void jaguar2_rx_parse_phystats(struct rtl8xxxu_priv *priv,
+			       struct ieee80211_rx_status *rx_status,
+			       struct rtl8723au_phy_stats *phy_stats,
+			       u32 rxmcs, struct ieee80211_hdr *hdr,
+			       bool crc_icv_err);
+int rtl8xxxu_gen2_channel_to_group(int channel);
+bool rtl8xxxu_simularity_compare(struct rtl8xxxu_priv *priv,
+				 int result[][8], int c1, int c2);
+bool rtl8xxxu_gen2_simularity_compare(struct rtl8xxxu_priv *priv,
+				      int result[][8], int c1, int c2);
+void rtl8xxxu_fill_txdesc_v1(struct ieee80211_hw *hw, struct ieee80211_hdr *hdr,
+			     struct ieee80211_tx_info *tx_info,
+			     struct rtl8xxxu_txdesc32 *tx_desc, bool sgi,
+			     bool short_preamble, bool ampdu_enable,
+			     u32 rts_rate, u8 macid);
+void rtl8xxxu_fill_txdesc_v2(struct ieee80211_hw *hw, struct ieee80211_hdr *hdr,
+			     struct ieee80211_tx_info *tx_info,
+			     struct rtl8xxxu_txdesc32 *tx_desc32, bool sgi,
+			     bool short_preamble, bool ampdu_enable,
+			     u32 rts_rate, u8 macid);
+void rtl8xxxu_fill_txdesc_v3(struct ieee80211_hw *hw, struct ieee80211_hdr *hdr,
+			     struct ieee80211_tx_info *tx_info,
+			     struct rtl8xxxu_txdesc32 *tx_desc32, bool sgi,
+			     bool short_preamble, bool ampdu_enable,
+			     u32 rts_rate, u8 macid);
+void rtl8723bu_set_ps_tdma(struct rtl8xxxu_priv *priv,
+			   u8 arg1, u8 arg2, u8 arg3, u8 arg4, u8 arg5);
+void rtl8723bu_phy_init_antenna_selection(struct rtl8xxxu_priv *priv);
+void rtl8723a_set_crystal_cap(struct rtl8xxxu_priv *priv, u8 crystal_cap);
+void rtl8188f_set_crystal_cap(struct rtl8xxxu_priv *priv, u8 crystal_cap);
+s8 rtl8723a_cck_rssi(struct rtl8xxxu_priv *priv, struct rtl8723au_phy_stats *phy_stats);
+void rtl8xxxu_update_ra_report(struct rtl8xxxu_ra_report *rarpt,
+			       u8 rate, u8 sgi, u8 bw);
+void rtl8188e_ra_info_init_all(struct rtl8xxxu_ra_info *ra);
+void rtl8188e_handle_ra_tx_report2(struct rtl8xxxu_priv *priv, struct sk_buff *skb);
+
+extern struct rtl8xxxu_fileops rtl8192fu_fops;
+extern struct rtl8xxxu_fileops rtl8710bu_fops;
+extern struct rtl8xxxu_fileops rtl8188fu_fops;
+extern struct rtl8xxxu_fileops rtl8188eu_fops;
+extern struct rtl8xxxu_fileops rtl8192cu_fops;
+extern struct rtl8xxxu_fileops rtl8192eu_fops;
+extern struct rtl8xxxu_fileops rtl8723au_fops;
+extern struct rtl8xxxu_fileops rtl8723bu_fops;
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
new file mode 100644
index 0000000000..6d0f975f89
--- /dev/null
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
@@ -0,0 +1,1900 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * RTL8XXXU mac80211 USB driver - 8188e specific subdriver
+ *
+ * Copyright (c) 2014 - 2016 Jes Sorensen <Jes.Sorensen@gmail.com>
+ *
+ * Portions, notably calibration code:
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This driver was written as a replacement for the vendor provided
+ * rtl8723au driver. As the Realtek 8xxx chips are very similar in
+ * their programming interface, I have started adding support for
+ * additional 8xxx chips like the 8192cu, 8188cus, etc.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <linux/usb.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/wireless.h>
+#include <linux/firmware.h>
+#include <linux/moduleparam.h>
+#include <net/mac80211.h>
+#include "rtl8xxxu.h"
+#include "rtl8xxxu_regs.h"
+
+static const struct rtl8xxxu_reg8val rtl8188e_mac_init_table[] = {
+	{0x026, 0x41}, {0x027, 0x35}, {0x040, 0x00}, {0x421, 0x0f},
+	{0x428, 0x0a}, {0x429, 0x10}, {0x430, 0x00}, {0x431, 0x01},
+	{0x432, 0x02}, {0x433, 0x04}, {0x434, 0x05}, {0x435, 0x06},
+	{0x436, 0x07}, {0x437, 0x08}, {0x438, 0x00}, {0x439, 0x00},
+	{0x43a, 0x01}, {0x43b, 0x02}, {0x43c, 0x04}, {0x43d, 0x05},
+	{0x43e, 0x06}, {0x43f, 0x07}, {0x440, 0x5d}, {0x441, 0x01},
+	{0x442, 0x00}, {0x444, 0x15}, {0x445, 0xf0}, {0x446, 0x0f},
+	{0x447, 0x00}, {0x458, 0x41}, {0x459, 0xa8}, {0x45a, 0x72},
+	{0x45b, 0xb9}, {0x460, 0x66}, {0x461, 0x66}, {0x480, 0x08},
+	{0x4c8, 0xff}, {0x4c9, 0x08}, {0x4cc, 0xff}, {0x4cd, 0xff},
+	{0x4ce, 0x01}, {0x4d3, 0x01}, {0x500, 0x26}, {0x501, 0xa2},
+	{0x502, 0x2f}, {0x503, 0x00}, {0x504, 0x28}, {0x505, 0xa3},
+	{0x506, 0x5e}, {0x507, 0x00}, {0x508, 0x2b}, {0x509, 0xa4},
+	{0x50a, 0x5e}, {0x50b, 0x00}, {0x50c, 0x4f}, {0x50d, 0xa4},
+	{0x50e, 0x00}, {0x50f, 0x00}, {0x512, 0x1c}, {0x514, 0x0a},
+	{0x516, 0x0a}, {0x525, 0x4f}, {0x550, 0x10}, {0x551, 0x10},
+	{0x559, 0x02}, {0x55d, 0xff}, {0x605, 0x30}, {0x608, 0x0e},
+	{0x609, 0x2a}, {0x620, 0xff}, {0x621, 0xff}, {0x622, 0xff},
+	{0x623, 0xff}, {0x624, 0xff}, {0x625, 0xff}, {0x626, 0xff},
+	{0x627, 0xff}, {0x63c, 0x08}, {0x63d, 0x08}, {0x63e, 0x0c},
+	{0x63f, 0x0c}, {0x640, 0x40}, {0x652, 0x20}, {0x66e, 0x05},
+	{0x700, 0x21}, {0x701, 0x43}, {0x702, 0x65}, {0x703, 0x87},
+	{0x708, 0x21}, {0x709, 0x43}, {0x70a, 0x65}, {0x70b, 0x87},
+	{0xffff, 0xff},
+};
+
+static const struct rtl8xxxu_reg32val rtl8188eu_phy_init_table[] = {
+	{0x800, 0x80040000}, {0x804, 0x00000003},
+	{0x808, 0x0000fc00}, {0x80c, 0x0000000a},
+	{0x810, 0x10001331}, {0x814, 0x020c3d10},
+	{0x818, 0x02200385}, {0x81c, 0x00000000},
+	{0x820, 0x01000100}, {0x824, 0x00390204},
+	{0x828, 0x00000000}, {0x82c, 0x00000000},
+	{0x830, 0x00000000}, {0x834, 0x00000000},
+	{0x838, 0x00000000}, {0x83c, 0x00000000},
+	{0x840, 0x00010000}, {0x844, 0x00000000},
+	{0x848, 0x00000000}, {0x84c, 0x00000000},
+	{0x850, 0x00000000}, {0x854, 0x00000000},
+	{0x858, 0x569a11a9}, {0x85c, 0x01000014},
+	{0x860, 0x66f60110}, {0x864, 0x061f0649},
+	{0x868, 0x00000000}, {0x86c, 0x27272700},
+	{0x870, 0x07000760}, {0x874, 0x25004000},
+	{0x878, 0x00000808}, {0x87c, 0x00000000},
+	{0x880, 0xb0000c1c}, {0x884, 0x00000001},
+	{0x888, 0x00000000}, {0x88c, 0xccc000c0},
+	{0x890, 0x00000800}, {0x894, 0xfffffffe},
+	{0x898, 0x40302010}, {0x89c, 0x00706050},
+	{0x900, 0x00000000}, {0x904, 0x00000023},
+	{0x908, 0x00000000}, {0x90c, 0x81121111},
+	{0x910, 0x00000002}, {0x914, 0x00000201},
+	{0xa00, 0x00d047c8}, {0xa04, 0x80ff800c},
+	{0xa08, 0x8c838300}, {0xa0c, 0x2e7f120f},
+	{0xa10, 0x9500bb7e}, {0xa14, 0x1114d028},
+	{0xa18, 0x00881117}, {0xa1c, 0x89140f00},
+	{0xa20, 0x1a1b0000}, {0xa24, 0x090e1317},
+	{0xa28, 0x00000204}, {0xa2c, 0x00d30000},
+	{0xa70, 0x101fbf00}, {0xa74, 0x00000007},
+	{0xa78, 0x00000900}, {0xa7c, 0x225b0606},
+	{0xa80, 0x218075b1}, {0xb2c, 0x80000000},
+	{0xc00, 0x48071d40}, {0xc04, 0x03a05611},
+	{0xc08, 0x000000e4}, {0xc0c, 0x6c6c6c6c},
+	{0xc10, 0x08800000}, {0xc14, 0x40000100},
+	{0xc18, 0x08800000}, {0xc1c, 0x40000100},
+	{0xc20, 0x00000000}, {0xc24, 0x00000000},
+	{0xc28, 0x00000000}, {0xc2c, 0x00000000},
+	{0xc30, 0x69e9ac47}, {0xc34, 0x469652af},
+	{0xc38, 0x49795994}, {0xc3c, 0x0a97971c},
+	{0xc40, 0x1f7c403f}, {0xc44, 0x000100b7},
+	{0xc48, 0xec020107}, {0xc4c, 0x007f037f},
+	{0xc50, 0x69553420}, {0xc54, 0x43bc0094},
+	{0xc58, 0x00013169}, {0xc5c, 0x00250492},
+	{0xc60, 0x00000000}, {0xc64, 0x7112848b},
+	{0xc68, 0x47c00bff}, {0xc6c, 0x00000036},
+	{0xc70, 0x2c7f000d}, {0xc74, 0x020610db},
+	{0xc78, 0x0000001f}, {0xc7c, 0x00b91612},
+	{0xc80, 0x390000e4}, {0xc84, 0x21f60000},
+	{0xc88, 0x40000100}, {0xc8c, 0x20200000},
+	{0xc90, 0x00091521}, {0xc94, 0x00000000},
+	{0xc98, 0x00121820}, {0xc9c, 0x00007f7f},
+	{0xca0, 0x00000000}, {0xca4, 0x000300a0},
+	{0xca8, 0x00000000}, {0xcac, 0x00000000},
+	{0xcb0, 0x00000000}, {0xcb4, 0x00000000},
+	{0xcb8, 0x00000000}, {0xcbc, 0x28000000},
+	{0xcc0, 0x00000000}, {0xcc4, 0x00000000},
+	{0xcc8, 0x00000000}, {0xccc, 0x00000000},
+	{0xcd0, 0x00000000}, {0xcd4, 0x00000000},
+	{0xcd8, 0x64b22427}, {0xcdc, 0x00766932},
+	{0xce0, 0x00222222}, {0xce4, 0x00000000},
+	{0xce8, 0x37644302}, {0xcec, 0x2f97d40c},
+	{0xd00, 0x00000740}, {0xd04, 0x00020401},
+	{0xd08, 0x0000907f}, {0xd0c, 0x20010201},
+	{0xd10, 0xa0633333}, {0xd14, 0x3333bc43},
+	{0xd18, 0x7a8f5b6f}, {0xd2c, 0xcc979975},
+	{0xd30, 0x00000000}, {0xd34, 0x80608000},
+	{0xd38, 0x00000000}, {0xd3c, 0x00127353},
+	{0xd40, 0x00000000}, {0xd44, 0x00000000},
+	{0xd48, 0x00000000}, {0xd4c, 0x00000000},
+	{0xd50, 0x6437140a}, {0xd54, 0x00000000},
+	{0xd58, 0x00000282}, {0xd5c, 0x30032064},
+	{0xd60, 0x4653de68}, {0xd64, 0x04518a3c},
+	{0xd68, 0x00002101}, {0xd6c, 0x2a201c16},
+	{0xd70, 0x1812362e}, {0xd74, 0x322c2220},
+	{0xd78, 0x000e3c24}, {0xe00, 0x2d2d2d2d},
+	{0xe04, 0x2d2d2d2d}, {0xe08, 0x0390272d},
+	{0xe10, 0x2d2d2d2d}, {0xe14, 0x2d2d2d2d},
+	{0xe18, 0x2d2d2d2d}, {0xe1c, 0x2d2d2d2d},
+	{0xe28, 0x00000000}, {0xe30, 0x1000dc1f},
+	{0xe34, 0x10008c1f}, {0xe38, 0x02140102},
+	{0xe3c, 0x681604c2}, {0xe40, 0x01007c00},
+	{0xe44, 0x01004800}, {0xe48, 0xfb000000},
+	{0xe4c, 0x000028d1}, {0xe50, 0x1000dc1f},
+	{0xe54, 0x10008c1f}, {0xe58, 0x02140102},
+	{0xe5c, 0x28160d05}, {0xe60, 0x00000048},
+	{0xe68, 0x001b25a4}, {0xe6c, 0x00c00014},
+	{0xe70, 0x00c00014}, {0xe74, 0x01000014},
+	{0xe78, 0x01000014}, {0xe7c, 0x01000014},
+	{0xe80, 0x01000014}, {0xe84, 0x00c00014},
+	{0xe88, 0x01000014}, {0xe8c, 0x00c00014},
+	{0xed0, 0x00c00014}, {0xed4, 0x00c00014},
+	{0xed8, 0x00c00014}, {0xedc, 0x00000014},
+	{0xee0, 0x00000014}, {0xee8, 0x21555448},
+	{0xeec, 0x01c00014}, {0xf14, 0x00000003},
+	{0xf4c, 0x00000000}, {0xf00, 0x00000300},
+	{0xffff, 0xffffffff},
+};
+
+static const struct rtl8xxxu_reg32val rtl8188e_agc_table[] = {
+	{0xc78, 0xfb000001}, {0xc78, 0xfb010001},
+	{0xc78, 0xfb020001}, {0xc78, 0xfb030001},
+	{0xc78, 0xfb040001}, {0xc78, 0xfb050001},
+	{0xc78, 0xfa060001}, {0xc78, 0xf9070001},
+	{0xc78, 0xf8080001}, {0xc78, 0xf7090001},
+	{0xc78, 0xf60a0001}, {0xc78, 0xf50b0001},
+	{0xc78, 0xf40c0001}, {0xc78, 0xf30d0001},
+	{0xc78, 0xf20e0001}, {0xc78, 0xf10f0001},
+	{0xc78, 0xf0100001}, {0xc78, 0xef110001},
+	{0xc78, 0xee120001}, {0xc78, 0xed130001},
+	{0xc78, 0xec140001}, {0xc78, 0xeb150001},
+	{0xc78, 0xea160001}, {0xc78, 0xe9170001},
+	{0xc78, 0xe8180001}, {0xc78, 0xe7190001},
+	{0xc78, 0xe61a0001}, {0xc78, 0xe51b0001},
+	{0xc78, 0xe41c0001}, {0xc78, 0xe31d0001},
+	{0xc78, 0xe21e0001}, {0xc78, 0xe11f0001},
+	{0xc78, 0x8a200001}, {0xc78, 0x89210001},
+	{0xc78, 0x88220001}, {0xc78, 0x87230001},
+	{0xc78, 0x86240001}, {0xc78, 0x85250001},
+	{0xc78, 0x84260001}, {0xc78, 0x83270001},
+	{0xc78, 0x82280001}, {0xc78, 0x6b290001},
+	{0xc78, 0x6a2a0001}, {0xc78, 0x692b0001},
+	{0xc78, 0x682c0001}, {0xc78, 0x672d0001},
+	{0xc78, 0x662e0001}, {0xc78, 0x652f0001},
+	{0xc78, 0x64300001}, {0xc78, 0x63310001},
+	{0xc78, 0x62320001}, {0xc78, 0x61330001},
+	{0xc78, 0x46340001}, {0xc78, 0x45350001},
+	{0xc78, 0x44360001}, {0xc78, 0x43370001},
+	{0xc78, 0x42380001}, {0xc78, 0x41390001},
+	{0xc78, 0x403a0001}, {0xc78, 0x403b0001},
+	{0xc78, 0x403c0001}, {0xc78, 0x403d0001},
+	{0xc78, 0x403e0001}, {0xc78, 0x403f0001},
+	{0xc78, 0xfb400001}, {0xc78, 0xfb410001},
+	{0xc78, 0xfb420001}, {0xc78, 0xfb430001},
+	{0xc78, 0xfb440001}, {0xc78, 0xfb450001},
+	{0xc78, 0xfb460001}, {0xc78, 0xfb470001},
+	{0xc78, 0xfb480001}, {0xc78, 0xfa490001},
+	{0xc78, 0xf94a0001}, {0xc78, 0xf84b0001},
+	{0xc78, 0xf74c0001}, {0xc78, 0xf64d0001},
+	{0xc78, 0xf54e0001}, {0xc78, 0xf44f0001},
+	{0xc78, 0xf3500001}, {0xc78, 0xf2510001},
+	{0xc78, 0xf1520001}, {0xc78, 0xf0530001},
+	{0xc78, 0xef540001}, {0xc78, 0xee550001},
+	{0xc78, 0xed560001}, {0xc78, 0xec570001},
+	{0xc78, 0xeb580001}, {0xc78, 0xea590001},
+	{0xc78, 0xe95a0001}, {0xc78, 0xe85b0001},
+	{0xc78, 0xe75c0001}, {0xc78, 0xe65d0001},
+	{0xc78, 0xe55e0001}, {0xc78, 0xe45f0001},
+	{0xc78, 0xe3600001}, {0xc78, 0xe2610001},
+	{0xc78, 0xc3620001}, {0xc78, 0xc2630001},
+	{0xc78, 0xc1640001}, {0xc78, 0x8b650001},
+	{0xc78, 0x8a660001}, {0xc78, 0x89670001},
+	{0xc78, 0x88680001}, {0xc78, 0x87690001},
+	{0xc78, 0x866a0001}, {0xc78, 0x856b0001},
+	{0xc78, 0x846c0001}, {0xc78, 0x676d0001},
+	{0xc78, 0x666e0001}, {0xc78, 0x656f0001},
+	{0xc78, 0x64700001}, {0xc78, 0x63710001},
+	{0xc78, 0x62720001}, {0xc78, 0x61730001},
+	{0xc78, 0x60740001}, {0xc78, 0x46750001},
+	{0xc78, 0x45760001}, {0xc78, 0x44770001},
+	{0xc78, 0x43780001}, {0xc78, 0x42790001},
+	{0xc78, 0x417a0001}, {0xc78, 0x407b0001},
+	{0xc78, 0x407c0001}, {0xc78, 0x407d0001},
+	{0xc78, 0x407e0001}, {0xc78, 0x407f0001},
+	{0xc50, 0x69553422}, {0xc50, 0x69553420},
+	{0xffff, 0xffffffff}
+};
+
+static const struct rtl8xxxu_rfregval rtl8188eu_radioa_init_table[] = {
+	{0x00, 0x00030000}, {0x08, 0x00084000},
+	{0x18, 0x00000407}, {0x19, 0x00000012},
+	{0x1e, 0x00080009}, {0x1f, 0x00000880},
+	{0x2f, 0x0001a060}, {0x3f, 0x00000000},
+	{0x42, 0x000060c0}, {0x57, 0x000d0000},
+	{0x58, 0x000be180}, {0x67, 0x00001552},
+	{0x83, 0x00000000}, {0xb0, 0x000ff8fc},
+	{0xb1, 0x00054400}, {0xb2, 0x000ccc19},
+	{0xb4, 0x00043003}, {0xb6, 0x0004953e},
+	{0xb7, 0x0001c718}, {0xb8, 0x000060ff},
+	{0xb9, 0x00080001}, {0xba, 0x00040000},
+	{0xbb, 0x00000400}, {0xbf, 0x000c0000},
+	{0xc2, 0x00002400}, {0xc3, 0x00000009},
+	{0xc4, 0x00040c91}, {0xc5, 0x00099999},
+	{0xc6, 0x000000a3}, {0xc7, 0x00088820},
+	{0xc8, 0x00076c06}, {0xc9, 0x00000000},
+	{0xca, 0x00080000}, {0xdf, 0x00000180},
+	{0xef, 0x000001a0}, {0x51, 0x0006b27d},
+	{0x52, 0x0007e49d},	/* Set to 0x0007e4dd for SDIO */
+	{0x53, 0x00000073}, {0x56, 0x00051ff3},
+	{0x35, 0x00000086}, {0x35, 0x00000186},
+	{0x35, 0x00000286}, {0x36, 0x00001c25},
+	{0x36, 0x00009c25}, {0x36, 0x00011c25},
+	{0x36, 0x00019c25}, {0xb6, 0x00048538},
+	{0x18, 0x00000c07}, {0x5a, 0x0004bd00},
+	{0x19, 0x000739d0}, {0x34, 0x0000adf3},
+	{0x34, 0x00009df0}, {0x34, 0x00008ded},
+	{0x34, 0x00007dea}, {0x34, 0x00006de7},
+	{0x34, 0x000054ee}, {0x34, 0x000044eb},
+	{0x34, 0x000034e8}, {0x34, 0x0000246b},
+	{0x34, 0x00001468}, {0x34, 0x0000006d},
+	{0x00, 0x00030159}, {0x84, 0x00068200},
+	{0x86, 0x000000ce}, {0x87, 0x00048a00},
+	{0x8e, 0x00065540}, {0x8f, 0x00088000},
+	{0xef, 0x000020a0}, {0x3b, 0x000f02b0},
+	{0x3b, 0x000ef7b0}, {0x3b, 0x000d4fb0},
+	{0x3b, 0x000cf060}, {0x3b, 0x000b0090},
+	{0x3b, 0x000a0080}, {0x3b, 0x00090080},
+	{0x3b, 0x0008f780}, {0x3b, 0x000722b0},
+	{0x3b, 0x0006f7b0}, {0x3b, 0x00054fb0},
+	{0x3b, 0x0004f060}, {0x3b, 0x00030090},
+	{0x3b, 0x00020080}, {0x3b, 0x00010080},
+	{0x3b, 0x0000f780}, {0xef, 0x000000a0},
+	{0x00, 0x00010159}, {0x18, 0x0000f407},
+	{0xFE, 0x00000000}, {0xFE, 0x00000000},
+	{0x1F, 0x00080003}, {0xFE, 0x00000000},
+	{0xFE, 0x00000000}, {0x1E, 0x00000001},
+	{0x1F, 0x00080000}, {0x00, 0x00033e60},
+	{0xff, 0xffffffff}
+};
+
+#define PERENTRY		23
+#define RETRYSIZE		5
+#define RATESIZE		28
+#define TX_RPT2_ITEM_SIZE	8
+
+static const u8 retry_penalty[PERENTRY][RETRYSIZE + 1] = {
+	{5, 4, 3, 2, 0, 3}, /* 92 , idx=0 */
+	{6, 5, 4, 3, 0, 4}, /* 86 , idx=1 */
+	{6, 5, 4, 2, 0, 4}, /* 81 , idx=2 */
+	{8, 7, 6, 4, 0, 6}, /* 75 , idx=3 */
+	{10, 9, 8, 6, 0, 8}, /* 71 , idx=4 */
+	{10, 9, 8, 4, 0, 8}, /* 66 , idx=5 */
+	{10, 9, 8, 2, 0, 8}, /* 62 , idx=6 */
+	{10, 9, 8, 0, 0, 8}, /* 59 , idx=7 */
+	{18, 17, 16, 8, 0, 16}, /* 53 , idx=8 */
+	{26, 25, 24, 16, 0, 24}, /* 50 , idx=9 */
+	{34, 33, 32, 24, 0, 32}, /* 47 , idx=0x0a */
+	{34, 31, 28, 20, 0, 32}, /* 43 , idx=0x0b */
+	{34, 31, 27, 18, 0, 32}, /* 40 , idx=0x0c */
+	{34, 31, 26, 16, 0, 32}, /* 37 , idx=0x0d */
+	{34, 30, 22, 16, 0, 32}, /* 32 , idx=0x0e */
+	{34, 30, 24, 16, 0, 32}, /* 26 , idx=0x0f */
+	{49, 46, 40, 16, 0, 48}, /* 20 , idx=0x10 */
+	{49, 45, 32, 0, 0, 48}, /* 17 , idx=0x11 */
+	{49, 45, 22, 18, 0, 48}, /* 15 , idx=0x12 */
+	{49, 40, 24, 16, 0, 48}, /* 12 , idx=0x13 */
+	{49, 32, 18, 12, 0, 48}, /* 9 , idx=0x14 */
+	{49, 22, 18, 14, 0, 48}, /* 6 , idx=0x15 */
+	{49, 16, 16, 0, 0, 48} /* 3, idx=0x16 */
+};
+
+static const u8 pt_penalty[RETRYSIZE + 1] = {34, 31, 30, 24, 0, 32};
+
+static const u8 retry_penalty_idx_normal[2][RATESIZE] = {
+	{ /* RSSI>TH */
+		4, 4, 4, 5,
+		4, 4, 5, 7, 7, 7, 8, 0x0a,
+		4, 4, 4, 4, 6, 0x0a, 0x0b, 0x0d,
+		5, 5, 7, 7, 8, 0x0b, 0x0d, 0x0f
+	},
+	{ /* RSSI<TH */
+		0x0a, 0x0a, 0x0b, 0x0c,
+		0x0a, 0x0a, 0x0b, 0x0c, 0x0d, 0x10, 0x13, 0x13,
+		0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x11, 0x13, 0x13,
+		9, 9, 9, 9, 0x0c, 0x0e, 0x11, 0x13
+	}
+};
+
+static const u8 retry_penalty_idx_cut_i[2][RATESIZE] = {
+	{ /* RSSI>TH */
+		4, 4, 4, 5,
+		4, 4, 5, 7, 7, 7, 8, 0x0a,
+		4, 4, 4, 4, 6, 0x0a, 0x0b, 0x0d,
+		5, 5, 7, 7, 8, 0x0b, 0x0d, 0x0f
+	},
+	{ /* RSSI<TH */
+		0x0a, 0x0a, 0x0b, 0x0c,
+		0x0a, 0x0a, 0x0b, 0x0c, 0x0d, 0x10, 0x13, 0x13,
+		0x06, 0x07, 0x08, 0x0d, 0x0e, 0x11, 0x11, 0x11,
+		9, 9, 9, 9, 0x0c, 0x0e, 0x11, 0x13
+	}
+};
+
+static const u8 retry_penalty_up_idx_normal[RATESIZE] = {
+	0x0c, 0x0d, 0x0d, 0x0f,
+	0x0d, 0x0e, 0x0f, 0x0f, 0x10, 0x12, 0x13, 0x14,
+	0x0f, 0x10, 0x10, 0x12, 0x12, 0x13, 0x14, 0x15,
+	0x11, 0x11, 0x12, 0x13, 0x13, 0x13, 0x14, 0x15
+};
+
+static const u8 retry_penalty_up_idx_cut_i[RATESIZE] = {
+	0x0c, 0x0d, 0x0d, 0x0f,
+	0x0d, 0x0e, 0x0f, 0x0f, 0x10, 0x12, 0x13, 0x14,
+	0x0b, 0x0b, 0x11, 0x11, 0x12, 0x12, 0x12, 0x12,
+	0x11, 0x11, 0x12, 0x13, 0x13, 0x13, 0x14, 0x15
+};
+
+static const u8 rssi_threshold[RATESIZE] = {
+	0, 0, 0, 0,
+	0, 0, 0, 0, 0, 0x24, 0x26, 0x2a,
+	0x18, 0x1a, 0x1d, 0x1f, 0x21, 0x27, 0x29, 0x2a,
+	0, 0, 0, 0x1f, 0x23, 0x28, 0x2a, 0x2c
+};
+
+static const u16 n_threshold_high[RATESIZE] = {
+	4, 4, 8, 16,
+	24, 36, 48, 72, 96, 144, 192, 216,
+	60, 80, 100, 160, 240, 400, 600, 800,
+	300, 320, 480, 720, 1000, 1200, 1600, 2000
+};
+
+static const u16 n_threshold_low[RATESIZE] = {
+	2, 2, 4, 8,
+	12, 18, 24, 36, 48, 72, 96, 108,
+	30, 40, 50, 80, 120, 200, 300, 400,
+	150, 160, 240, 360, 500, 600, 800, 1000
+};
+
+static const u8 dropping_necessary[RATESIZE] = {
+	1, 1, 1, 1,
+	1, 2, 3, 4, 5, 6, 7, 8,
+	1, 2, 3, 4, 5, 6, 7, 8,
+	5, 6, 7, 8, 9, 10, 11, 12
+};
+
+static const u8 pending_for_rate_up_fail[5] = {2, 10, 24, 40, 60};
+
+static const u16 dynamic_tx_rpt_timing[6] = {
+	0x186a, 0x30d4, 0x493e, 0x61a8, 0x7a12, 0x927c /* 200ms-1200ms */
+};
+
+enum rtl8188e_tx_rpt_timing {
+	DEFAULT_TIMING = 0,
+	INCREASE_TIMING,
+	DECREASE_TIMING
+};
+
+static int rtl8188eu_identify_chip(struct rtl8xxxu_priv *priv)
+{
+	struct device *dev = &priv->udev->dev;
+	u32 sys_cfg, vendor;
+	int ret = 0;
+
+	strscpy(priv->chip_name, "8188EU", sizeof(priv->chip_name));
+	priv->rtl_chip = RTL8188E;
+	priv->rf_paths = 1;
+	priv->rx_paths = 1;
+	priv->tx_paths = 1;
+	priv->has_wifi = 1;
+
+	sys_cfg = rtl8xxxu_read32(priv, REG_SYS_CFG);
+	priv->chip_cut = u32_get_bits(sys_cfg, SYS_CFG_CHIP_VERSION_MASK);
+	if (sys_cfg & SYS_CFG_TRP_VAUX_EN) {
+		dev_info(dev, "Unsupported test chip\n");
+		return -EOPNOTSUPP;
+	}
+
+	/*
+	 * TODO: At a glance, I cut requires a different firmware,
+	 * different initialisation tables, and no software rate
+	 * control. The vendor driver is not configured to handle
+	 * I cut chips by default. Are there any in the wild?
+	 */
+	if (priv->chip_cut == 8) {
+		dev_info(dev, "RTL8188EU cut I is not supported. Please complain about it at linux-wireless@vger.kernel.org.\n");
+		return -EOPNOTSUPP;
+	}
+
+	vendor = sys_cfg & SYS_CFG_VENDOR_ID;
+	rtl8xxxu_identify_vendor_1bit(priv, vendor);
+
+	ret = rtl8xxxu_config_endpoints_no_sie(priv);
+
+	return ret;
+}
+
+static void rtl8188eu_config_channel(struct ieee80211_hw *hw)
+{
+	struct rtl8xxxu_priv *priv = hw->priv;
+	u32 val32, rsr;
+	u8 opmode;
+	int sec_ch_above, channel;
+	int i;
+
+	opmode = rtl8xxxu_read8(priv, REG_BW_OPMODE);
+	rsr = rtl8xxxu_read32(priv, REG_RESPONSE_RATE_SET);
+	channel = hw->conf.chandef.chan->hw_value;
+
+	switch (hw->conf.chandef.width) {
+	case NL80211_CHAN_WIDTH_20_NOHT:
+	case NL80211_CHAN_WIDTH_20:
+		opmode |= BW_OPMODE_20MHZ;
+		rtl8xxxu_write8(priv, REG_BW_OPMODE, opmode);
+
+		val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE);
+		val32 &= ~FPGA_RF_MODE;
+		rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32);
+
+		val32 = rtl8xxxu_read32(priv, REG_FPGA1_RF_MODE);
+		val32 &= ~FPGA_RF_MODE;
+		rtl8xxxu_write32(priv, REG_FPGA1_RF_MODE, val32);
+		break;
+	case NL80211_CHAN_WIDTH_40:
+		if (hw->conf.chandef.center_freq1 >
+		    hw->conf.chandef.chan->center_freq) {
+			sec_ch_above = 1;
+			channel += 2;
+		} else {
+			sec_ch_above = 0;
+			channel -= 2;
+		}
+
+		opmode &= ~BW_OPMODE_20MHZ;
+		rtl8xxxu_write8(priv, REG_BW_OPMODE, opmode);
+		rsr &= ~RSR_RSC_BANDWIDTH_40M;
+		if (sec_ch_above)
+			rsr |= RSR_RSC_LOWER_SUB_CHANNEL;
+		else
+			rsr |= RSR_RSC_UPPER_SUB_CHANNEL;
+		rtl8xxxu_write32(priv, REG_RESPONSE_RATE_SET, rsr);
+
+		val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE);
+		val32 |= FPGA_RF_MODE;
+		rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32);
+
+		val32 = rtl8xxxu_read32(priv, REG_FPGA1_RF_MODE);
+		val32 |= FPGA_RF_MODE;
+		rtl8xxxu_write32(priv, REG_FPGA1_RF_MODE, val32);
+
+		/*
+		 * Set Control channel to upper or lower. These settings
+		 * are required only for 40MHz
+		 */
+		val32 = rtl8xxxu_read32(priv, REG_CCK0_SYSTEM);
+		val32 &= ~CCK0_SIDEBAND;
+		if (!sec_ch_above)
+			val32 |= CCK0_SIDEBAND;
+		rtl8xxxu_write32(priv, REG_CCK0_SYSTEM, val32);
+
+		val32 = rtl8xxxu_read32(priv, REG_OFDM1_LSTF);
+		val32 &= ~OFDM_LSTF_PRIME_CH_MASK; /* 0xc00 */
+		if (sec_ch_above)
+			val32 |= OFDM_LSTF_PRIME_CH_LOW;
+		else
+			val32 |= OFDM_LSTF_PRIME_CH_HIGH;
+		rtl8xxxu_write32(priv, REG_OFDM1_LSTF, val32);
+
+		val32 = rtl8xxxu_read32(priv, REG_FPGA0_POWER_SAVE);
+		val32 &= ~(FPGA0_PS_LOWER_CHANNEL | FPGA0_PS_UPPER_CHANNEL);
+		if (sec_ch_above)
+			val32 |= FPGA0_PS_UPPER_CHANNEL;
+		else
+			val32 |= FPGA0_PS_LOWER_CHANNEL;
+		rtl8xxxu_write32(priv, REG_FPGA0_POWER_SAVE, val32);
+		break;
+
+	default:
+		break;
+	}
+
+	for (i = RF_A; i < priv->rf_paths; i++) {
+		val32 = rtl8xxxu_read_rfreg(priv, i, RF6052_REG_MODE_AG);
+		u32p_replace_bits(&val32, channel, MODE_AG_CHANNEL_MASK);
+		rtl8xxxu_write_rfreg(priv, i, RF6052_REG_MODE_AG, val32);
+	}
+
+	for (i = RF_A; i < priv->rf_paths; i++) {
+		val32 = rtl8xxxu_read_rfreg(priv, i, RF6052_REG_MODE_AG);
+		val32 &= ~MODE_AG_BW_MASK;
+		if (hw->conf.chandef.width == NL80211_CHAN_WIDTH_40)
+			val32 |= MODE_AG_BW_40MHZ_8723B;
+		else
+			val32 |= MODE_AG_BW_20MHZ_8723B;
+		rtl8xxxu_write_rfreg(priv, i, RF6052_REG_MODE_AG, val32);
+	}
+}
+
+static void rtl8188eu_init_aggregation(struct rtl8xxxu_priv *priv)
+{
+	u8 agg_ctrl, usb_spec;
+
+	usb_spec = rtl8xxxu_read8(priv, REG_USB_SPECIAL_OPTION);
+	usb_spec &= ~USB_SPEC_USB_AGG_ENABLE;
+	rtl8xxxu_write8(priv, REG_USB_SPECIAL_OPTION, usb_spec);
+
+	agg_ctrl = rtl8xxxu_read8(priv, REG_TRXDMA_CTRL);
+	agg_ctrl &= ~TRXDMA_CTRL_RXDMA_AGG_EN;
+	rtl8xxxu_write8(priv, REG_TRXDMA_CTRL, agg_ctrl);
+}
+
+static int rtl8188eu_parse_efuse(struct rtl8xxxu_priv *priv)
+{
+	struct rtl8188eu_efuse *efuse = &priv->efuse_wifi.efuse8188eu;
+
+	if (efuse->rtl_id != cpu_to_le16(0x8129))
+		return -EINVAL;
+
+	ether_addr_copy(priv->mac_addr, efuse->mac_addr);
+
+	memcpy(priv->cck_tx_power_index_A, efuse->tx_power_index_A.cck_base,
+	       sizeof(efuse->tx_power_index_A.cck_base));
+
+	memcpy(priv->ht40_1s_tx_power_index_A,
+	       efuse->tx_power_index_A.ht40_base,
+	       sizeof(efuse->tx_power_index_A.ht40_base));
+
+	priv->default_crystal_cap = efuse->xtal_k & 0x3f;
+
+	return 0;
+}
+
+static void rtl8188eu_reset_8051(struct rtl8xxxu_priv *priv)
+{
+	u16 sys_func;
+
+	sys_func = rtl8xxxu_read16(priv, REG_SYS_FUNC);
+	sys_func &= ~SYS_FUNC_CPU_ENABLE;
+	rtl8xxxu_write16(priv, REG_SYS_FUNC, sys_func);
+
+	sys_func |= SYS_FUNC_CPU_ENABLE;
+	rtl8xxxu_write16(priv, REG_SYS_FUNC, sys_func);
+}
+
+static int rtl8188eu_load_firmware(struct rtl8xxxu_priv *priv)
+{
+	const char *fw_name;
+	int ret;
+
+	fw_name = "rtlwifi/rtl8188eufw.bin";
+
+	ret = rtl8xxxu_load_firmware(priv, fw_name);
+
+	return ret;
+}
+
+static void rtl8188eu_init_phy_bb(struct rtl8xxxu_priv *priv)
+{
+	u8 val8;
+	u16 val16;
+
+	val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC);
+	val16 |= SYS_FUNC_BB_GLB_RSTN | SYS_FUNC_BBRSTB | SYS_FUNC_DIO_RF;
+	rtl8xxxu_write16(priv, REG_SYS_FUNC, val16);
+
+	/*
+	 * Per vendor driver, run power sequence before init of RF
+	 */
+	val8 = RF_ENABLE | RF_RSTB | RF_SDMRSTB;
+	rtl8xxxu_write8(priv, REG_RF_CTRL, val8);
+
+	val8 = SYS_FUNC_USBA | SYS_FUNC_USBD |
+	       SYS_FUNC_BB_GLB_RSTN | SYS_FUNC_BBRSTB;
+	rtl8xxxu_write8(priv, REG_SYS_FUNC, val8);
+
+	rtl8xxxu_init_phy_regs(priv, rtl8188eu_phy_init_table);
+	rtl8xxxu_init_phy_regs(priv, rtl8188e_agc_table);
+}
+
+static int rtl8188eu_init_phy_rf(struct rtl8xxxu_priv *priv)
+{
+	return rtl8xxxu_init_phy_rf(priv, rtl8188eu_radioa_init_table, RF_A);
+}
+
+static int rtl8188eu_iqk_path_a(struct rtl8xxxu_priv *priv)
+{
+	u32 reg_eac, reg_e94, reg_e9c;
+	int result = 0;
+
+	/* Path A IQK setting */
+	rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x10008c1c);
+	rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x30008c1c);
+
+	rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x8214032a);
+	rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x28160000);
+
+	/* LO calibration setting */
+	rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x00462911);
+
+	/* One shot, path A LOK & IQK */
+	rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000);
+	rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000);
+
+	mdelay(10);
+
+	/* Check failed */
+	reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2);
+	reg_e94 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_A);
+	reg_e9c = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_A);
+
+	if (!(reg_eac & BIT(28)) &&
+	    ((reg_e94 & 0x03ff0000) != 0x01420000) &&
+	    ((reg_e9c & 0x03ff0000) != 0x00420000))
+		result |= 0x01;
+
+	return result;
+}
+
+static int rtl8188eu_rx_iqk_path_a(struct rtl8xxxu_priv *priv)
+{
+	u32 reg_ea4, reg_eac, reg_e94, reg_e9c, val32;
+	int result = 0;
+
+	/* Leave IQK mode */
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+	u32p_replace_bits(&val32, 0, 0xffffff00);
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+
+	/* Enable path A PA in TX IQK mode */
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, 0x800a0);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x30000);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0000f);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf117b);
+
+	/* Enter IQK mode */
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+	u32p_replace_bits(&val32, 0x808000, 0xffffff00);
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+
+	/* TX IQK setting */
+	rtl8xxxu_write32(priv, REG_TX_IQK, 0x01007c00);
+	rtl8xxxu_write32(priv, REG_RX_IQK, 0x81004800);
+
+	/* path-A IQK setting */
+	rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x10008c1c);
+	rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x30008c1c);
+
+	rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x82160804);
+	rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x28160000);
+
+	/* LO calibration setting */
+	rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x0046a911);
+
+	/* One shot, path A LOK & IQK */
+	rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000);
+	rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000);
+
+	mdelay(10);
+
+	/* Check failed */
+	reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2);
+	reg_e94 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_A);
+	reg_e9c = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_A);
+
+	if (!(reg_eac & BIT(28)) &&
+	    ((reg_e94 & 0x03ff0000) != 0x01420000) &&
+	    ((reg_e9c & 0x03ff0000) != 0x00420000))
+		result |= 0x01;
+	else
+		goto out;
+
+	val32 = 0x80007c00 |
+		(reg_e94 & 0x03ff0000) | ((reg_e9c >> 16) & 0x03ff);
+	rtl8xxxu_write32(priv, REG_TX_IQK, val32);
+
+	/* Modify RX IQK mode table */
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+	u32p_replace_bits(&val32, 0, 0xffffff00);
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, 0x800a0);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x30000);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0000f);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf7ffa);
+
+	/* Enter IQK mode */
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+	u32p_replace_bits(&val32, 0x808000, 0xffffff00);
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+
+	/* IQK setting */
+	rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800);
+
+	/* Path A IQK setting */
+	rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x30008c1c);
+	rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x10008c1c);
+
+	rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x82160c05);
+	rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x28160c05);
+
+	/* LO calibration setting */
+	rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x0046a911);
+
+	/* One shot, path A LOK & IQK */
+	rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000);
+	rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000);
+
+	mdelay(10);
+
+	reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2);
+	reg_ea4 = rtl8xxxu_read32(priv, REG_RX_POWER_BEFORE_IQK_A_2);
+
+	if (!(reg_eac & BIT(27)) &&
+	    ((reg_ea4 & 0x03ff0000) != 0x01320000) &&
+	    ((reg_eac & 0x03ff0000) != 0x00360000))
+		result |= 0x02;
+	else
+		dev_warn(&priv->udev->dev, "%s: Path A RX IQK failed!\n",
+			 __func__);
+
+out:
+	return result;
+}
+
+static void rtl8188eu_phy_iqcalibrate(struct rtl8xxxu_priv *priv,
+				      int result[][8], int t)
+{
+	struct device *dev = &priv->udev->dev;
+	u32 i, val32;
+	int path_a_ok;
+	int retry = 2;
+	static const u32 adda_regs[RTL8XXXU_ADDA_REGS] = {
+		REG_FPGA0_XCD_SWITCH_CTRL, REG_BLUETOOTH,
+		REG_RX_WAIT_CCA, REG_TX_CCK_RFON,
+		REG_TX_CCK_BBON, REG_TX_OFDM_RFON,
+		REG_TX_OFDM_BBON, REG_TX_TO_RX,
+		REG_TX_TO_TX, REG_RX_CCK,
+		REG_RX_OFDM, REG_RX_WAIT_RIFS,
+		REG_RX_TO_RX, REG_STANDBY,
+		REG_SLEEP, REG_PMPD_ANAEN
+	};
+	static const u32 iqk_mac_regs[RTL8XXXU_MAC_REGS] = {
+		REG_TXPAUSE, REG_BEACON_CTRL,
+		REG_BEACON_CTRL_1, REG_GPIO_MUXCFG
+	};
+	static const u32 iqk_bb_regs[RTL8XXXU_BB_REGS] = {
+		REG_OFDM0_TRX_PATH_ENABLE, REG_OFDM0_TR_MUX_PAR,
+		REG_FPGA0_XCD_RF_SW_CTRL, REG_CONFIG_ANT_A, REG_CONFIG_ANT_B,
+		REG_FPGA0_XAB_RF_SW_CTRL, REG_FPGA0_XA_RF_INT_OE,
+		REG_FPGA0_XB_RF_INT_OE, REG_CCK0_AFE_SETTING
+	};
+
+	/*
+	 * Note: IQ calibration must be performed after loading
+	 *       PHY_REG.txt , and radio_a, radio_b.txt
+	 */
+
+	if (t == 0) {
+		/* Save ADDA parameters, turn Path A ADDA on */
+		rtl8xxxu_save_regs(priv, adda_regs, priv->adda_backup,
+				   RTL8XXXU_ADDA_REGS);
+		rtl8xxxu_save_mac_regs(priv, iqk_mac_regs, priv->mac_backup);
+		rtl8xxxu_save_regs(priv, iqk_bb_regs,
+				   priv->bb_backup, RTL8XXXU_BB_REGS);
+	}
+
+	rtl8xxxu_path_adda_on(priv, adda_regs, true);
+
+	if (t == 0) {
+		val32 = rtl8xxxu_read32(priv, REG_FPGA0_XA_HSSI_PARM1);
+		priv->pi_enabled = u32_get_bits(val32, FPGA0_HSSI_PARM1_PI);
+	}
+
+	if (!priv->pi_enabled) {
+		/* Switch BB to PI mode to do IQ Calibration. */
+		rtl8xxxu_write32(priv, REG_FPGA0_XA_HSSI_PARM1, 0x01000100);
+		rtl8xxxu_write32(priv, REG_FPGA0_XB_HSSI_PARM1, 0x01000100);
+	}
+
+	/* MAC settings */
+	rtl8xxxu_mac_calibration(priv, iqk_mac_regs, priv->mac_backup);
+
+	val32 = rtl8xxxu_read32(priv, REG_CCK0_AFE_SETTING);
+	u32p_replace_bits(&val32, 0xf, 0x0f000000);
+	rtl8xxxu_write32(priv, REG_CCK0_AFE_SETTING, val32);
+
+	rtl8xxxu_write32(priv, REG_OFDM0_TRX_PATH_ENABLE, 0x03a05600);
+	rtl8xxxu_write32(priv, REG_OFDM0_TR_MUX_PAR, 0x000800e4);
+	rtl8xxxu_write32(priv, REG_FPGA0_XCD_RF_SW_CTRL, 0x22204000);
+
+	if (!priv->no_pape) {
+		val32 = rtl8xxxu_read32(priv, REG_FPGA0_XAB_RF_SW_CTRL);
+		val32 |= (FPGA0_RF_PAPE |
+			  (FPGA0_RF_PAPE << FPGA0_RF_BD_CTRL_SHIFT));
+		rtl8xxxu_write32(priv, REG_FPGA0_XAB_RF_SW_CTRL, val32);
+	}
+
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_XA_RF_INT_OE);
+	val32 &= ~BIT(10);
+	rtl8xxxu_write32(priv, REG_FPGA0_XA_RF_INT_OE, val32);
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_XB_RF_INT_OE);
+	val32 &= ~BIT(10);
+	rtl8xxxu_write32(priv, REG_FPGA0_XB_RF_INT_OE, val32);
+
+	/* Page B init */
+	rtl8xxxu_write32(priv, REG_CONFIG_ANT_A, 0x0f600000);
+
+	/* IQ calibration setting */
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+	u32p_replace_bits(&val32, 0x808000, 0xffffff00);
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+	rtl8xxxu_write32(priv, REG_TX_IQK, 0x01007c00);
+	rtl8xxxu_write32(priv, REG_RX_IQK, 0x81004800);
+
+	for (i = 0; i < retry; i++) {
+		path_a_ok = rtl8188eu_iqk_path_a(priv);
+		if (path_a_ok == 0x01) {
+			val32 = rtl8xxxu_read32(priv,
+						REG_TX_POWER_BEFORE_IQK_A);
+			result[t][0] = (val32 >> 16) & 0x3ff;
+			val32 = rtl8xxxu_read32(priv,
+						REG_TX_POWER_AFTER_IQK_A);
+			result[t][1] = (val32 >> 16) & 0x3ff;
+			break;
+		}
+	}
+
+	if (!path_a_ok)
+		dev_dbg(dev, "%s: Path A TX IQK failed!\n", __func__);
+
+	for (i = 0; i < retry; i++) {
+		path_a_ok = rtl8188eu_rx_iqk_path_a(priv);
+		if (path_a_ok == 0x03) {
+			val32 = rtl8xxxu_read32(priv,
+						REG_RX_POWER_BEFORE_IQK_A_2);
+			result[t][2] = (val32 >> 16) & 0x3ff;
+			val32 = rtl8xxxu_read32(priv,
+						REG_RX_POWER_AFTER_IQK_A_2);
+			result[t][3] = (val32 >> 16) & 0x3ff;
+
+			break;
+		}
+	}
+
+	if (!path_a_ok)
+		dev_dbg(dev, "%s: Path A RX IQK failed!\n", __func__);
+
+	/* Back to BB mode, load original value */
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+	u32p_replace_bits(&val32, 0, 0xffffff00);
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+
+	if (t == 0)
+		return;
+
+	if (!priv->pi_enabled) {
+		/* Switch back BB to SI mode after finishing IQ Calibration */
+		rtl8xxxu_write32(priv, REG_FPGA0_XA_HSSI_PARM1, 0x01000000);
+		rtl8xxxu_write32(priv, REG_FPGA0_XB_HSSI_PARM1, 0x01000000);
+	}
+
+	/* Reload ADDA power saving parameters */
+	rtl8xxxu_restore_regs(priv, adda_regs, priv->adda_backup,
+			      RTL8XXXU_ADDA_REGS);
+
+	/* Reload MAC parameters */
+	rtl8xxxu_restore_mac_regs(priv, iqk_mac_regs, priv->mac_backup);
+
+	/* Reload BB parameters */
+	rtl8xxxu_restore_regs(priv, iqk_bb_regs,
+			      priv->bb_backup, RTL8XXXU_BB_REGS);
+
+	/* Restore RX initial gain */
+	rtl8xxxu_write32(priv, REG_FPGA0_XA_LSSI_PARM, 0x00032ed3);
+
+	/* Load 0xe30 IQC default value */
+	rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x01008c00);
+	rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x01008c00);
+}
+
+static void rtl8188eu_phy_iq_calibrate(struct rtl8xxxu_priv *priv)
+{
+	struct device *dev = &priv->udev->dev;
+	int result[4][8];	/* last is final result */
+	int i, candidate;
+	bool path_a_ok;
+	u32 reg_e94, reg_e9c, reg_ea4, reg_eac;
+	u32 reg_eb4, reg_ebc, reg_ec4, reg_ecc;
+	bool simu;
+
+	memset(result, 0, sizeof(result));
+	result[3][0] = 0x100;
+	result[3][2] = 0x100;
+	result[3][4] = 0x100;
+	result[3][6] = 0x100;
+
+	candidate = -1;
+
+	path_a_ok = false;
+
+	for (i = 0; i < 3; i++) {
+		rtl8188eu_phy_iqcalibrate(priv, result, i);
+
+		if (i == 1) {
+			simu = rtl8xxxu_simularity_compare(priv,
+							   result, 0, 1);
+			if (simu) {
+				candidate = 0;
+				break;
+			}
+		}
+
+		if (i == 2) {
+			simu = rtl8xxxu_simularity_compare(priv,
+							   result, 0, 2);
+			if (simu) {
+				candidate = 0;
+				break;
+			}
+
+			simu = rtl8xxxu_simularity_compare(priv,
+							   result, 1, 2);
+			if (simu)
+				candidate = 1;
+			else
+				candidate = 3;
+		}
+	}
+
+	if (candidate >= 0) {
+		reg_e94 = result[candidate][0];
+		priv->rege94 =  reg_e94;
+		reg_e9c = result[candidate][1];
+		priv->rege9c = reg_e9c;
+		reg_ea4 = result[candidate][2];
+		reg_eac = result[candidate][3];
+		reg_eb4 = result[candidate][4];
+		priv->regeb4 = reg_eb4;
+		reg_ebc = result[candidate][5];
+		priv->regebc = reg_ebc;
+		reg_ec4 = result[candidate][6];
+		reg_ecc = result[candidate][7];
+		dev_dbg(dev, "%s: candidate is %x\n", __func__, candidate);
+		dev_dbg(dev,
+			"%s: e94=%x e9c=%x ea4=%x eac=%x eb4=%x ebc=%x ec4=%x ecc=%x\n",
+			__func__, reg_e94, reg_e9c, reg_ea4, reg_eac,
+			reg_eb4, reg_ebc, reg_ec4, reg_ecc);
+		path_a_ok = true;
+	} else {
+		reg_e94 = 0x100;
+		reg_eb4 = 0x100;
+		priv->rege94 = 0x100;
+		priv->regeb4 = 0x100;
+		reg_e9c = 0x0;
+		reg_ebc = 0x0;
+		priv->rege9c = 0x0;
+		priv->regebc = 0x0;
+	}
+
+	if (reg_e94 && candidate >= 0)
+		rtl8xxxu_fill_iqk_matrix_a(priv, path_a_ok, result,
+					   candidate, (reg_ea4 == 0));
+
+	rtl8xxxu_save_regs(priv, rtl8xxxu_iqk_phy_iq_bb_reg,
+			   priv->bb_recovery_backup, RTL8XXXU_BB_REGS);
+}
+
+static void rtl8188e_disabled_to_emu(struct rtl8xxxu_priv *priv)
+{
+	u16 val16;
+
+	val16 = rtl8xxxu_read16(priv, REG_APS_FSMCO);
+	val16 &= ~(APS_FSMCO_HW_SUSPEND | APS_FSMCO_PCIE);
+	rtl8xxxu_write16(priv, REG_APS_FSMCO, val16);
+}
+
+static int rtl8188e_emu_to_active(struct rtl8xxxu_priv *priv)
+{
+	u8 val8;
+	u32 val32;
+	u16 val16;
+	int count, ret = 0;
+
+	/* wait till 0x04[17] = 1 power ready*/
+	for (count = RTL8XXXU_MAX_REG_POLL; count; count--) {
+		val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO);
+		if (val32 & BIT(17))
+			break;
+
+		udelay(10);
+	}
+
+	if (!count) {
+		ret = -EBUSY;
+		goto exit;
+	}
+
+	/* reset baseband */
+	val8 = rtl8xxxu_read8(priv, REG_SYS_FUNC);
+	val8 &= ~(SYS_FUNC_BBRSTB | SYS_FUNC_BB_GLB_RSTN);
+	rtl8xxxu_write8(priv, REG_SYS_FUNC, val8);
+
+	/*0x24[23] = 2b'01 schmit trigger */
+	val32 = rtl8xxxu_read32(priv, REG_AFE_XTAL_CTRL);
+	val32 |= BIT(23);
+	rtl8xxxu_write32(priv, REG_AFE_XTAL_CTRL, val32);
+
+	/* 0x04[15] = 0 disable HWPDN (control by DRV)*/
+	val16 = rtl8xxxu_read16(priv, REG_APS_FSMCO);
+	val16 &= ~APS_FSMCO_HW_POWERDOWN;
+	rtl8xxxu_write16(priv, REG_APS_FSMCO, val16);
+
+	/*0x04[12:11] = 2b'00 disable WL suspend*/
+	val16 = rtl8xxxu_read16(priv, REG_APS_FSMCO);
+	val16 &= ~(APS_FSMCO_HW_SUSPEND | APS_FSMCO_PCIE);
+	rtl8xxxu_write16(priv, REG_APS_FSMCO, val16);
+
+	/* set, then poll until 0 */
+	val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO);
+	val32 |= APS_FSMCO_MAC_ENABLE;
+	rtl8xxxu_write32(priv, REG_APS_FSMCO, val32);
+
+	for (count = RTL8XXXU_MAX_REG_POLL; count; count--) {
+		val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO);
+		if ((val32 & APS_FSMCO_MAC_ENABLE) == 0) {
+			ret = 0;
+			break;
+		}
+		udelay(10);
+	}
+
+	if (!count) {
+		ret = -EBUSY;
+		goto exit;
+	}
+
+	/* LDO normal mode*/
+	val8 = rtl8xxxu_read8(priv, REG_LPLDO_CTRL);
+	val8 &= ~BIT(4);
+	rtl8xxxu_write8(priv, REG_LPLDO_CTRL, val8);
+
+exit:
+	return ret;
+}
+
+static int rtl8188eu_active_to_emu(struct rtl8xxxu_priv *priv)
+{
+	u8 val8;
+
+	/* Turn off RF */
+	val8 = rtl8xxxu_read8(priv, REG_RF_CTRL);
+	val8 &= ~RF_ENABLE;
+	rtl8xxxu_write8(priv, REG_RF_CTRL, val8);
+
+	/* LDO Sleep mode */
+	val8 = rtl8xxxu_read8(priv, REG_LPLDO_CTRL);
+	val8 |= BIT(4);
+	rtl8xxxu_write8(priv, REG_LPLDO_CTRL, val8);
+
+	return 0;
+}
+
+static int rtl8188eu_emu_to_disabled(struct rtl8xxxu_priv *priv)
+{
+	u32 val32;
+	u16 val16;
+	u8 val8;
+
+	val32 = rtl8xxxu_read32(priv, REG_AFE_XTAL_CTRL);
+	val32 |= BIT(23);
+	rtl8xxxu_write32(priv, REG_AFE_XTAL_CTRL, val32);
+
+	val16 = rtl8xxxu_read16(priv, REG_APS_FSMCO);
+	val16 &= ~APS_FSMCO_PCIE;
+	val16 |= APS_FSMCO_HW_SUSPEND;
+	rtl8xxxu_write16(priv, REG_APS_FSMCO, val16);
+
+	rtl8xxxu_write8(priv, REG_APS_FSMCO + 3, 0x00);
+
+	val8 = rtl8xxxu_read8(priv, REG_GPIO_MUXCFG + 1);
+	val8 &= ~BIT(4);
+	rtl8xxxu_write8(priv, REG_GPIO_MUXCFG + 1, val8);
+
+	/* Set USB suspend enable local register 0xfe10[4]=1 */
+	val8 = rtl8xxxu_read8(priv, 0xfe10);
+	val8 |= BIT(4);
+	rtl8xxxu_write8(priv, 0xfe10, val8);
+
+	return 0;
+}
+
+static int rtl8188eu_active_to_lps(struct rtl8xxxu_priv *priv)
+{
+	struct device *dev = &priv->udev->dev;
+	u8 val8;
+	u16 val16;
+	u32 val32;
+	int retry, retval;
+
+	rtl8xxxu_write8(priv, REG_TXPAUSE, 0x7f);
+
+	retry = 100;
+	retval = -EBUSY;
+	/* Poll 32 bit wide REG_SCH_TX_CMD for 0 to ensure no TX is pending. */
+	do {
+		val32 = rtl8xxxu_read32(priv, REG_SCH_TX_CMD);
+		if (!val32) {
+			retval = 0;
+			break;
+		}
+	} while (retry--);
+
+	if (!retry) {
+		dev_warn(dev, "Failed to flush TX queue\n");
+		retval = -EBUSY;
+		goto out;
+	}
+
+	/* Disable CCK and OFDM, clock gated */
+	val8 = rtl8xxxu_read8(priv, REG_SYS_FUNC);
+	val8 &= ~SYS_FUNC_BBRSTB;
+	rtl8xxxu_write8(priv, REG_SYS_FUNC, val8);
+
+	udelay(2);
+
+	/* Reset MAC TRX */
+	val16 = rtl8xxxu_read16(priv, REG_CR);
+	val16 |= 0xff;
+	val16 &= ~(CR_MAC_TX_ENABLE | CR_MAC_RX_ENABLE | CR_SECURITY_ENABLE);
+	rtl8xxxu_write16(priv, REG_CR, val16);
+
+	val8 = rtl8xxxu_read8(priv, REG_DUAL_TSF_RST);
+	val8 |= DUAL_TSF_TX_OK;
+	rtl8xxxu_write8(priv, REG_DUAL_TSF_RST, val8);
+
+out:
+	return retval;
+}
+
+static int rtl8188eu_power_on(struct rtl8xxxu_priv *priv)
+{
+	u16 val16;
+	int ret;
+
+	rtl8188e_disabled_to_emu(priv);
+
+	ret = rtl8188e_emu_to_active(priv);
+	if (ret)
+		goto exit;
+
+	/*
+	 * Enable MAC DMA/WMAC/SCHEDULE/SEC block
+	 * Set CR bit10 to enable 32k calibration.
+	 * We do not set CR_MAC_TX_ENABLE | CR_MAC_RX_ENABLE here
+	 * due to a hardware bug in the 88E, requiring those to be
+	 * set after REG_TRXFF_BNDY is set. If not the RXFF bundary
+	 * will get set to a larger buffer size than the real buffer
+	 * size.
+	 */
+	val16 = (CR_HCI_TXDMA_ENABLE | CR_HCI_RXDMA_ENABLE |
+		 CR_TXDMA_ENABLE | CR_RXDMA_ENABLE |
+		 CR_PROTOCOL_ENABLE | CR_SCHEDULE_ENABLE |
+		 CR_SECURITY_ENABLE | CR_CALTIMER_ENABLE);
+	rtl8xxxu_write16(priv, REG_CR, val16);
+
+exit:
+	return ret;
+}
+
+static void rtl8188eu_power_off(struct rtl8xxxu_priv *priv)
+{
+	u8 val8;
+	u16 val16;
+
+	rtl8xxxu_flush_fifo(priv);
+
+	val8 = rtl8xxxu_read8(priv, REG_TX_REPORT_CTRL);
+	val8 &= ~TX_REPORT_CTRL_TIMER_ENABLE;
+	rtl8xxxu_write8(priv, REG_TX_REPORT_CTRL, val8);
+
+	/* Turn off RF */
+	rtl8xxxu_write8(priv, REG_RF_CTRL, 0x00);
+
+	rtl8188eu_active_to_lps(priv);
+
+	/* Reset Firmware if running in RAM */
+	if (rtl8xxxu_read8(priv, REG_MCU_FW_DL) & MCU_FW_RAM_SEL)
+		rtl8xxxu_firmware_self_reset(priv);
+
+	/* Reset MCU */
+	val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC);
+	val16 &= ~SYS_FUNC_CPU_ENABLE;
+	rtl8xxxu_write16(priv, REG_SYS_FUNC, val16);
+
+	/* Reset MCU ready status */
+	rtl8xxxu_write8(priv, REG_MCU_FW_DL, 0x00);
+
+	/* 32K_CTRL looks to be very 8188e specific */
+	val8 = rtl8xxxu_read8(priv, REG_32K_CTRL);
+	val8 &= ~BIT(0);
+	rtl8xxxu_write8(priv, REG_32K_CTRL, val8);
+
+	rtl8188eu_active_to_emu(priv);
+	rtl8188eu_emu_to_disabled(priv);
+
+	/* Reset MCU IO Wrapper */
+	val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL + 1);
+	val8 &= ~BIT(3);
+	rtl8xxxu_write8(priv, REG_RSV_CTRL + 1, val8);
+
+	val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL + 1);
+	val8 |= BIT(3);
+	rtl8xxxu_write8(priv, REG_RSV_CTRL + 1, val8);
+
+	/* Vendor driver refers to GPIO_IN */
+	val8 = rtl8xxxu_read8(priv, REG_GPIO_PIN_CTRL);
+	/* Vendor driver refers to GPIO_OUT */
+	rtl8xxxu_write8(priv, REG_GPIO_PIN_CTRL + 1, val8);
+	rtl8xxxu_write8(priv, REG_GPIO_PIN_CTRL + 2, 0xff);
+
+	val8 = rtl8xxxu_read8(priv, REG_GPIO_IO_SEL);
+	rtl8xxxu_write8(priv, REG_GPIO_IO_SEL, val8 << 4);
+	val8 = rtl8xxxu_read8(priv, REG_GPIO_IO_SEL + 1);
+	rtl8xxxu_write8(priv, REG_GPIO_IO_SEL + 1, val8 | 0x0f);
+
+	/*
+	 * Set LNA, TRSW, EX_PA Pin to output mode
+	 * Referred to as REG_BB_PAD_CTRL in 8188eu vendor driver
+	 */
+	rtl8xxxu_write32(priv, REG_PAD_CTRL1, 0x00080808);
+
+	rtl8xxxu_write8(priv, REG_RSV_CTRL, 0x00);
+
+	rtl8xxxu_write32(priv, REG_GPIO_MUXCFG, 0x00000000);
+}
+
+static void rtl8188e_enable_rf(struct rtl8xxxu_priv *priv)
+{
+	u32 val32;
+
+	rtl8xxxu_write8(priv, REG_RF_CTRL, RF_ENABLE | RF_RSTB | RF_SDMRSTB);
+
+	val32 = rtl8xxxu_read32(priv, REG_OFDM0_TRX_PATH_ENABLE);
+	val32 &= ~(OFDM_RF_PATH_RX_MASK | OFDM_RF_PATH_TX_MASK);
+	val32 |= OFDM_RF_PATH_RX_A | OFDM_RF_PATH_TX_A;
+	rtl8xxxu_write32(priv, REG_OFDM0_TRX_PATH_ENABLE, val32);
+
+	rtl8xxxu_write8(priv, REG_TXPAUSE, 0x00);
+}
+
+static void rtl8188e_disable_rf(struct rtl8xxxu_priv *priv)
+{
+	u32 val32;
+
+	val32 = rtl8xxxu_read32(priv, REG_OFDM0_TRX_PATH_ENABLE);
+	val32 &= ~OFDM_RF_PATH_TX_MASK;
+	rtl8xxxu_write32(priv, REG_OFDM0_TRX_PATH_ENABLE, val32);
+
+	/* Power down RF module */
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_AC, 0);
+
+	rtl8188eu_active_to_emu(priv);
+}
+
+static void rtl8188e_usb_quirks(struct rtl8xxxu_priv *priv)
+{
+	u16 val16;
+
+	/*
+	 * Technically this is not a USB quirk, but a chip quirk.
+	 * This has to be done after REG_TRXFF_BNDY is set, see
+	 * rtl8188eu_power_on() for details.
+	 */
+	val16 = rtl8xxxu_read16(priv, REG_CR);
+	val16 |= (CR_MAC_TX_ENABLE | CR_MAC_RX_ENABLE);
+	rtl8xxxu_write16(priv, REG_CR, val16);
+
+	rtl8xxxu_gen2_usb_quirks(priv);
+
+	/* Pre-TX enable WEP/TKIP security */
+	rtl8xxxu_write8(priv, REG_EARLY_MODE_CONTROL_8188E + 3, 0x01);
+}
+
+static s8 rtl8188e_cck_rssi(struct rtl8xxxu_priv *priv, struct rtl8723au_phy_stats *phy_stats)
+{
+	/* only use lna 0/1/2/3/7 */
+	static const s8 lna_gain_table_0[8] = {17, -1, -13, -29, -32, -35, -38, -41};
+	/* only use lna 3/7 */
+	static const s8 lna_gain_table_1[8] = {29, 20, 12, 3, -6, -15, -24, -33};
+
+	u8 cck_agc_rpt = phy_stats->cck_agc_rpt_ofdm_cfosho_a;
+	s8 rx_pwr_all = 0x00;
+	u8 vga_idx, lna_idx;
+	s8 lna_gain = 0;
+
+	lna_idx = u8_get_bits(cck_agc_rpt, CCK_AGC_RPT_LNA_IDX_MASK);
+	vga_idx = u8_get_bits(cck_agc_rpt, CCK_AGC_RPT_VGA_IDX_MASK);
+
+	if (priv->chip_cut >= 8) /* cut I */ /* SMIC */
+		lna_gain = lna_gain_table_0[lna_idx];
+	else /* TSMC */
+		lna_gain = lna_gain_table_1[lna_idx];
+
+	rx_pwr_all = lna_gain - (2 * vga_idx);
+
+	return rx_pwr_all;
+}
+
+static int rtl8188eu_led_brightness_set(struct led_classdev *led_cdev,
+					enum led_brightness brightness)
+{
+	struct rtl8xxxu_priv *priv = container_of(led_cdev,
+						  struct rtl8xxxu_priv,
+						  led_cdev);
+	u8 ledcfg = rtl8xxxu_read8(priv, REG_LEDCFG2);
+
+	if (brightness == LED_OFF) {
+		ledcfg &= ~LEDCFG2_HW_LED_CONTROL;
+		ledcfg |= LEDCFG2_SW_LED_CONTROL | LEDCFG2_SW_LED_DISABLE;
+	} else if (brightness == LED_ON) {
+		ledcfg &= ~(LEDCFG2_HW_LED_CONTROL | LEDCFG2_SW_LED_DISABLE);
+		ledcfg |= LEDCFG2_SW_LED_CONTROL;
+	} else if (brightness == RTL8XXXU_HW_LED_CONTROL) {
+		ledcfg &= ~LEDCFG2_SW_LED_DISABLE;
+		ledcfg |= LEDCFG2_HW_LED_CONTROL | LEDCFG2_HW_LED_ENABLE;
+	}
+
+	rtl8xxxu_write8(priv, REG_LEDCFG2, ledcfg);
+
+	return 0;
+}
+
+static void rtl8188e_set_tx_rpt_timing(struct rtl8xxxu_ra_info *ra, u8 timing)
+{
+	u8 idx;
+
+	for (idx = 0; idx < 5; idx++)
+		if (dynamic_tx_rpt_timing[idx] == ra->rpt_time)
+			break;
+
+	if (timing == DEFAULT_TIMING) {
+		idx = 0; /* 200ms */
+	} else if (timing == INCREASE_TIMING) {
+		if (idx < 5)
+			idx++;
+	} else if (timing == DECREASE_TIMING) {
+		if (idx > 0)
+			idx--;
+	}
+
+	ra->rpt_time = dynamic_tx_rpt_timing[idx];
+}
+
+static void rtl8188e_rate_down(struct rtl8xxxu_ra_info *ra)
+{
+	u8 rate_id = ra->pre_rate;
+	u8 lowest_rate = ra->lowest_rate;
+	u8 highest_rate = ra->highest_rate;
+	s8 i;
+
+	if (rate_id > highest_rate) {
+		rate_id = highest_rate;
+	} else if (ra->rate_sgi) {
+		ra->rate_sgi = 0;
+	} else if (rate_id > lowest_rate) {
+		if (rate_id > 0) {
+			for (i = rate_id - 1; i >= lowest_rate; i--) {
+				if (ra->ra_use_rate & BIT(i)) {
+					rate_id = i;
+					goto rate_down_finish;
+				}
+			}
+		}
+	} else if (rate_id <= lowest_rate) {
+		rate_id = lowest_rate;
+	}
+
+rate_down_finish:
+	if (ra->ra_waiting_counter == 1) {
+		ra->ra_waiting_counter++;
+		ra->ra_pending_counter++;
+	} else if (ra->ra_waiting_counter > 1) {
+		ra->ra_waiting_counter = 0;
+		ra->ra_pending_counter = 0;
+	}
+
+	if (ra->ra_pending_counter >= 4)
+		ra->ra_pending_counter = 4;
+
+	ra->ra_drop_after_down = 1;
+
+	ra->decision_rate = rate_id;
+
+	rtl8188e_set_tx_rpt_timing(ra, DECREASE_TIMING);
+}
+
+static void rtl8188e_rate_up(struct rtl8xxxu_ra_info *ra)
+{
+	u8 rate_id = ra->pre_rate;
+	u8 highest_rate = ra->highest_rate;
+	u8 i;
+
+	if (ra->ra_waiting_counter == 1) {
+		ra->ra_waiting_counter = 0;
+		ra->ra_pending_counter = 0;
+	} else if (ra->ra_waiting_counter > 1) {
+		ra->pre_rssi_sta_ra = ra->rssi_sta_ra;
+		goto rate_up_finish;
+	}
+
+	rtl8188e_set_tx_rpt_timing(ra, DEFAULT_TIMING);
+
+	if (rate_id < highest_rate) {
+		for (i = rate_id + 1; i <= highest_rate; i++) {
+			if (ra->ra_use_rate & BIT(i)) {
+				rate_id = i;
+				goto rate_up_finish;
+			}
+		}
+	} else if (rate_id == highest_rate) {
+		if (ra->sgi_enable && !ra->rate_sgi)
+			ra->rate_sgi = 1;
+		else if (!ra->sgi_enable)
+			ra->rate_sgi = 0;
+	} else { /* rate_id > ra->highest_rate */
+		rate_id = highest_rate;
+	}
+
+rate_up_finish:
+	if (ra->ra_waiting_counter == (4 + pending_for_rate_up_fail[ra->ra_pending_counter]))
+		ra->ra_waiting_counter = 0;
+	else
+		ra->ra_waiting_counter++;
+
+	ra->decision_rate = rate_id;
+}
+
+static void rtl8188e_reset_ra_counter(struct rtl8xxxu_ra_info *ra)
+{
+	u8 rate_id = ra->decision_rate;
+
+	ra->nsc_up = (n_threshold_high[rate_id] + n_threshold_low[rate_id]) >> 1;
+	ra->nsc_down = (n_threshold_high[rate_id] + n_threshold_low[rate_id]) >> 1;
+}
+
+static void rtl8188e_rate_decision(struct rtl8xxxu_ra_info *ra)
+{
+	struct rtl8xxxu_priv *priv = container_of(ra, struct rtl8xxxu_priv, ra_info);
+	const u8 *retry_penalty_idx_0;
+	const u8 *retry_penalty_idx_1;
+	const u8 *retry_penalty_up_idx;
+	u8 rate_id, penalty_id1, penalty_id2;
+	int i;
+
+	if (ra->total == 0)
+		return;
+
+	if (ra->ra_drop_after_down) {
+		ra->ra_drop_after_down--;
+
+		rtl8188e_reset_ra_counter(ra);
+
+		return;
+	}
+
+	if (priv->chip_cut == 8) { /* cut I */
+		retry_penalty_idx_0 = retry_penalty_idx_cut_i[0];
+		retry_penalty_idx_1 = retry_penalty_idx_cut_i[1];
+		retry_penalty_up_idx = retry_penalty_up_idx_cut_i;
+	} else {
+		retry_penalty_idx_0 = retry_penalty_idx_normal[0];
+		retry_penalty_idx_1 = retry_penalty_idx_normal[1];
+		retry_penalty_up_idx = retry_penalty_up_idx_normal;
+	}
+
+	if (ra->rssi_sta_ra < (ra->pre_rssi_sta_ra - 3) ||
+	    ra->rssi_sta_ra > (ra->pre_rssi_sta_ra + 3)) {
+		ra->pre_rssi_sta_ra = ra->rssi_sta_ra;
+		ra->ra_waiting_counter = 0;
+		ra->ra_pending_counter = 0;
+	}
+
+	/* Start RA decision */
+	if (ra->pre_rate > ra->highest_rate)
+		rate_id = ra->highest_rate;
+	else
+		rate_id = ra->pre_rate;
+
+	/* rate down */
+	if (ra->rssi_sta_ra > rssi_threshold[rate_id])
+		penalty_id1 = retry_penalty_idx_0[rate_id];
+	else
+		penalty_id1 = retry_penalty_idx_1[rate_id];
+
+	for (i = 0; i < 5; i++)
+		ra->nsc_down += ra->retry[i] * retry_penalty[penalty_id1][i];
+
+	if (ra->nsc_down > (ra->total * retry_penalty[penalty_id1][5]))
+		ra->nsc_down -= ra->total * retry_penalty[penalty_id1][5];
+	else
+		ra->nsc_down = 0;
+
+	/* rate up */
+	penalty_id2 = retry_penalty_up_idx[rate_id];
+
+	for (i = 0; i < 5; i++)
+		ra->nsc_up += ra->retry[i] * retry_penalty[penalty_id2][i];
+
+	if (ra->nsc_up > (ra->total * retry_penalty[penalty_id2][5]))
+		ra->nsc_up -= ra->total * retry_penalty[penalty_id2][5];
+	else
+		ra->nsc_up = 0;
+
+	if (ra->nsc_down < n_threshold_low[rate_id] ||
+	    ra->drop > dropping_necessary[rate_id]) {
+		rtl8188e_rate_down(ra);
+
+		rtl8xxxu_update_ra_report(&priv->ra_report, ra->decision_rate,
+					  ra->rate_sgi, priv->ra_report.txrate.bw);
+	} else if (ra->nsc_up > n_threshold_high[rate_id]) {
+		rtl8188e_rate_up(ra);
+
+		rtl8xxxu_update_ra_report(&priv->ra_report, ra->decision_rate,
+					  ra->rate_sgi, priv->ra_report.txrate.bw);
+	}
+
+	if (ra->decision_rate == ra->pre_rate)
+		ra->dynamic_tx_rpt_timing_counter++;
+	else
+		ra->dynamic_tx_rpt_timing_counter = 0;
+
+	if (ra->dynamic_tx_rpt_timing_counter >= 4) {
+		/* Rate didn't change 4 times, extend RPT timing */
+		rtl8188e_set_tx_rpt_timing(ra, INCREASE_TIMING);
+		ra->dynamic_tx_rpt_timing_counter = 0;
+	}
+
+	ra->pre_rate = ra->decision_rate;
+
+	rtl8188e_reset_ra_counter(ra);
+}
+
+static void rtl8188e_power_training_try_state(struct rtl8xxxu_ra_info *ra)
+{
+	ra->pt_try_state = 0;
+	switch (ra->pt_mode_ss) {
+	case 3:
+		if (ra->decision_rate >= DESC_RATE_MCS13)
+			ra->pt_try_state = 1;
+		break;
+	case 2:
+		if (ra->decision_rate >= DESC_RATE_MCS5)
+			ra->pt_try_state = 1;
+		break;
+	case 1:
+		if (ra->decision_rate >= DESC_RATE_48M)
+			ra->pt_try_state = 1;
+		break;
+	case 0:
+		if (ra->decision_rate >= DESC_RATE_11M)
+			ra->pt_try_state = 1;
+		break;
+	default:
+		break;
+	}
+
+	if (ra->rssi_sta_ra < 48) {
+		ra->pt_stage = 0;
+	} else if (ra->pt_try_state == 1) {
+		if ((ra->pt_stop_count >= 10) ||
+		    (ra->pt_pre_rssi > ra->rssi_sta_ra + 5) ||
+		    (ra->pt_pre_rssi < ra->rssi_sta_ra - 5) ||
+		    (ra->decision_rate != ra->pt_pre_rate)) {
+			if (ra->pt_stage == 0)
+				ra->pt_stage = 1;
+			else if (ra->pt_stage == 1)
+				ra->pt_stage = 3;
+			else
+				ra->pt_stage = 5;
+
+			ra->pt_pre_rssi = ra->rssi_sta_ra;
+			ra->pt_stop_count = 0;
+		} else {
+			ra->ra_stage = 0;
+			ra->pt_stop_count++;
+		}
+	} else {
+		ra->pt_stage = 0;
+		ra->ra_stage = 0;
+	}
+
+	ra->pt_pre_rate = ra->decision_rate;
+
+	/* TODO: implement the "false alarm" statistics for this */
+	/* Disable power training when noisy environment */
+	/* if (p_dm_odm->is_disable_power_training) { */
+	if (1) {
+		ra->pt_stage = 0;
+		ra->ra_stage = 0;
+		ra->pt_stop_count = 0;
+	}
+}
+
+static void rtl8188e_power_training_decision(struct rtl8xxxu_ra_info *ra)
+{
+	u8 temp_stage;
+	u32 numsc;
+	u32 num_total;
+	u8 stage_id;
+	u8 j;
+
+	numsc = 0;
+	num_total = ra->total * pt_penalty[5];
+	for (j = 0; j <= 4; j++) {
+		numsc += ra->retry[j] * pt_penalty[j];
+
+		if (numsc > num_total)
+			break;
+	}
+
+	j >>= 1;
+	temp_stage = (ra->pt_stage + 1) >> 1;
+	if (temp_stage > j)
+		stage_id = temp_stage - j;
+	else
+		stage_id = 0;
+
+	ra->pt_smooth_factor = (ra->pt_smooth_factor >> 1) +
+			       (ra->pt_smooth_factor >> 2) +
+			       stage_id * 16 + 2;
+	if (ra->pt_smooth_factor > 192)
+		ra->pt_smooth_factor = 192;
+	stage_id = ra->pt_smooth_factor >> 6;
+	temp_stage = stage_id * 2;
+	if (temp_stage != 0)
+		temp_stage--;
+	if (ra->drop > 3)
+		temp_stage = 0;
+	ra->pt_stage = temp_stage;
+}
+
+void rtl8188e_handle_ra_tx_report2(struct rtl8xxxu_priv *priv, struct sk_buff *skb)
+{
+	u32 *_rx_desc = (u32 *)(skb->data - sizeof(struct rtl8xxxu_rxdesc16));
+	struct rtl8xxxu_rxdesc16 *rx_desc = (struct rtl8xxxu_rxdesc16 *)_rx_desc;
+	struct device *dev = &priv->udev->dev;
+	struct rtl8xxxu_ra_info *ra = &priv->ra_info;
+	u32 tx_rpt_len = rx_desc->pktlen & 0x3ff;
+	u32 items = tx_rpt_len / TX_RPT2_ITEM_SIZE;
+	u64 macid_valid = ((u64)_rx_desc[5] << 32) | _rx_desc[4];
+	u32 macid;
+	u8 *rpt = skb->data;
+	bool valid;
+	u16 min_rpt_time = 0x927c;
+
+	dev_dbg(dev, "%s: len: %d items: %d\n", __func__, tx_rpt_len, items);
+
+	/* We only use macid 0, so only the first item is relevant.
+	 * AP mode will use more of them if it's ever implemented.
+	 */
+	if (!priv->vif || priv->vif->type == NL80211_IFTYPE_STATION)
+		items = 1;
+
+	for (macid = 0; macid < items; macid++) {
+		valid = false;
+
+		if (macid < 64)
+			valid = macid_valid & BIT(macid);
+
+		if (valid) {
+			ra->retry[0] = le16_to_cpu(*(__le16 *)rpt);
+			ra->retry[1] = rpt[2];
+			ra->retry[2] = rpt[3];
+			ra->retry[3] = rpt[4];
+			ra->retry[4] = rpt[5];
+			ra->drop = rpt[6];
+			ra->total = ra->retry[0] + ra->retry[1] + ra->retry[2] +
+				    ra->retry[3] + ra->retry[4] + ra->drop;
+
+			if (ra->total > 0) {
+				if (ra->ra_stage < 5)
+					rtl8188e_rate_decision(ra);
+				else if (ra->ra_stage == 5)
+					rtl8188e_power_training_try_state(ra);
+				else /* ra->ra_stage == 6 */
+					rtl8188e_power_training_decision(ra);
+
+				if (ra->ra_stage <= 5)
+					ra->ra_stage++;
+				else
+					ra->ra_stage = 0;
+			}
+		} else if (macid == 0) {
+			dev_warn(dev, "%s: TX report item 0 not valid\n", __func__);
+		}
+
+		dev_dbg(dev, "%s:  valid: %d retry: %d %d %d %d %d drop: %d\n",
+			__func__, valid,
+			ra->retry[0], ra->retry[1], ra->retry[2],
+			ra->retry[3], ra->retry[4], ra->drop);
+
+		if (min_rpt_time > ra->rpt_time)
+			min_rpt_time = ra->rpt_time;
+
+		rpt += TX_RPT2_ITEM_SIZE;
+	}
+
+	if (min_rpt_time != ra->pre_min_rpt_time) {
+		rtl8xxxu_write16(priv, REG_TX_REPORT_TIME, min_rpt_time);
+		ra->pre_min_rpt_time = min_rpt_time;
+	}
+}
+
+static void rtl8188e_arfb_refresh(struct rtl8xxxu_ra_info *ra)
+{
+	s8 i;
+
+	ra->ra_use_rate = ra->rate_mask;
+
+	/* Highest rate */
+	if (ra->ra_use_rate) {
+		for (i = RATESIZE; i >= 0; i--) {
+			if (ra->ra_use_rate & BIT(i)) {
+				ra->highest_rate = i;
+				break;
+			}
+		}
+	} else {
+		ra->highest_rate = 0;
+	}
+
+	/* Lowest rate */
+	if (ra->ra_use_rate) {
+		for (i = 0; i < RATESIZE; i++) {
+			if (ra->ra_use_rate & BIT(i)) {
+				ra->lowest_rate = i;
+				break;
+			}
+		}
+	} else {
+		ra->lowest_rate = 0;
+	}
+
+	if (ra->highest_rate > DESC_RATE_MCS7)
+		ra->pt_mode_ss = 3;
+	else if (ra->highest_rate > DESC_RATE_54M)
+		ra->pt_mode_ss = 2;
+	else if (ra->highest_rate > DESC_RATE_11M)
+		ra->pt_mode_ss = 1;
+	else
+		ra->pt_mode_ss = 0;
+}
+
+static void
+rtl8188e_update_rate_mask(struct rtl8xxxu_priv *priv,
+			  u32 ramask, u8 rateid, int sgi, int txbw_40mhz,
+			  u8 macid)
+{
+	struct rtl8xxxu_ra_info *ra = &priv->ra_info;
+
+	ra->rate_id = rateid;
+	ra->rate_mask = ramask;
+	ra->sgi_enable = sgi;
+
+	rtl8188e_arfb_refresh(ra);
+}
+
+static void rtl8188e_ra_set_rssi(struct rtl8xxxu_priv *priv, u8 macid, u8 rssi)
+{
+	priv->ra_info.rssi_sta_ra = rssi;
+}
+
+void rtl8188e_ra_info_init_all(struct rtl8xxxu_ra_info *ra)
+{
+	ra->decision_rate = DESC_RATE_MCS7;
+	ra->pre_rate = DESC_RATE_MCS7;
+	ra->highest_rate = DESC_RATE_MCS7;
+	ra->lowest_rate = 0;
+	ra->rate_id = 0;
+	ra->rate_mask = 0xfffff;
+	ra->rssi_sta_ra = 0;
+	ra->pre_rssi_sta_ra = 0;
+	ra->sgi_enable = 0;
+	ra->ra_use_rate = 0xfffff;
+	ra->nsc_down = (n_threshold_high[DESC_RATE_MCS7] + n_threshold_low[DESC_RATE_MCS7]) / 2;
+	ra->nsc_up = (n_threshold_high[DESC_RATE_MCS7] + n_threshold_low[DESC_RATE_MCS7]) / 2;
+	ra->rate_sgi = 0;
+	ra->rpt_time = 0x927c;
+	ra->drop = 0;
+	ra->retry[0] = 0;
+	ra->retry[1] = 0;
+	ra->retry[2] = 0;
+	ra->retry[3] = 0;
+	ra->retry[4] = 0;
+	ra->total = 0;
+	ra->ra_waiting_counter = 0;
+	ra->ra_pending_counter = 0;
+	ra->ra_drop_after_down = 0;
+
+	ra->pt_try_state = 0;
+	ra->pt_stage = 5;
+	ra->pt_smooth_factor = 192;
+	ra->pt_stop_count = 0;
+	ra->pt_pre_rate = 0;
+	ra->pt_pre_rssi = 0;
+	ra->pt_mode_ss = 0;
+	ra->ra_stage = 0;
+}
+
+struct rtl8xxxu_fileops rtl8188eu_fops = {
+	.identify_chip = rtl8188eu_identify_chip,
+	.parse_efuse = rtl8188eu_parse_efuse,
+	.load_firmware = rtl8188eu_load_firmware,
+	.power_on = rtl8188eu_power_on,
+	.power_off = rtl8188eu_power_off,
+	.read_efuse = rtl8xxxu_read_efuse,
+	.reset_8051 = rtl8188eu_reset_8051,
+	.llt_init = rtl8xxxu_init_llt_table,
+	.init_phy_bb = rtl8188eu_init_phy_bb,
+	.init_phy_rf = rtl8188eu_init_phy_rf,
+	.phy_lc_calibrate = rtl8723a_phy_lc_calibrate,
+	.phy_iq_calibrate = rtl8188eu_phy_iq_calibrate,
+	.config_channel = rtl8188eu_config_channel,
+	.parse_rx_desc = rtl8xxxu_parse_rxdesc16,
+	.parse_phystats = rtl8723au_rx_parse_phystats,
+	.init_aggregation = rtl8188eu_init_aggregation,
+	.enable_rf = rtl8188e_enable_rf,
+	.disable_rf = rtl8188e_disable_rf,
+	.usb_quirks = rtl8188e_usb_quirks,
+	.set_tx_power = rtl8188f_set_tx_power,
+	.update_rate_mask = rtl8188e_update_rate_mask,
+	.report_connect = rtl8xxxu_gen2_report_connect,
+	.report_rssi = rtl8188e_ra_set_rssi,
+	.fill_txdesc = rtl8xxxu_fill_txdesc_v3,
+	.set_crystal_cap = rtl8188f_set_crystal_cap,
+	.cck_rssi = rtl8188e_cck_rssi,
+	.led_classdev_brightness_set = rtl8188eu_led_brightness_set,
+	.writeN_block_size = 128,
+	.rx_desc_size = sizeof(struct rtl8xxxu_rxdesc16),
+	.tx_desc_size = sizeof(struct rtl8xxxu_txdesc32),
+	.has_tx_report = 1,
+	.init_reg_pkt_life_time = 1,
+	.gen2_thermal_meter = 1,
+	.adda_1t_init = 0x0b1b25a0,
+	.adda_1t_path_on = 0x0bdb25a0,
+	/*
+	 * Use 9K for 8188e normal chip
+	 * Max RX buffer = 10K - max(TxReportSize(64*8), WOLPattern(16*24))
+	 */
+	.trxff_boundary = 0x25ff,
+	.pbp_rx = PBP_PAGE_SIZE_128,
+	.pbp_tx = PBP_PAGE_SIZE_128,
+	.mactable = rtl8188e_mac_init_table,
+	.total_page_num = TX_TOTAL_PAGE_NUM_8188E,
+	.page_num_hi = TX_PAGE_NUM_HI_PQ_8188E,
+	.page_num_lo = TX_PAGE_NUM_LO_PQ_8188E,
+	.page_num_norm = TX_PAGE_NUM_NORM_PQ_8188E,
+	.last_llt_entry = 175,
+};
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188f.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188f.c
new file mode 100644
index 0000000000..1e1c8fa194
--- /dev/null
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188f.c
@@ -0,0 +1,1764 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * RTL8XXXU mac80211 USB driver - 8188f specific subdriver
+ *
+ * Copyright (c) 2022 Bitterblue Smith <rtl8821cerfe2@gmail.com>
+ *
+ * Portions copied from existing rtl8xxxu code:
+ * Copyright (c) 2014 - 2017 Jes Sorensen <Jes.Sorensen@gmail.com>
+ *
+ * Portions, notably calibration code:
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <linux/usb.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/wireless.h>
+#include <linux/firmware.h>
+#include <linux/moduleparam.h>
+#include <net/mac80211.h>
+#include "rtl8xxxu.h"
+#include "rtl8xxxu_regs.h"
+
+static const struct rtl8xxxu_reg8val rtl8188f_mac_init_table[] = {
+	{0x024, 0xDF}, {0x025, 0x07}, {0x02B, 0x1C}, {0x283, 0x20},
+	{0x421, 0x0F}, {0x428, 0x0A}, {0x429, 0x10}, {0x430, 0x00},
+	{0x431, 0x00}, {0x432, 0x00}, {0x433, 0x01}, {0x434, 0x04},
+	{0x435, 0x05}, {0x436, 0x07}, {0x437, 0x08}, {0x43C, 0x04},
+	{0x43D, 0x05}, {0x43E, 0x07}, {0x43F, 0x08}, {0x440, 0x5D},
+	{0x441, 0x01}, {0x442, 0x00}, {0x444, 0x10}, {0x445, 0x00},
+	{0x446, 0x00}, {0x447, 0x00}, {0x448, 0x00}, {0x449, 0xF0},
+	{0x44A, 0x0F}, {0x44B, 0x3E}, {0x44C, 0x10}, {0x44D, 0x00},
+	{0x44E, 0x00}, {0x44F, 0x00}, {0x450, 0x00}, {0x451, 0xF0},
+	{0x452, 0x0F}, {0x453, 0x00}, {0x456, 0x5E}, {0x460, 0x44},
+	{0x461, 0x44}, {0x4BC, 0xC0}, {0x4C8, 0xFF}, {0x4C9, 0x08},
+	{0x4CC, 0xFF}, {0x4CD, 0xFF}, {0x4CE, 0x01}, {0x500, 0x26},
+	{0x501, 0xA2}, {0x502, 0x2F}, {0x503, 0x00}, {0x504, 0x28},
+	{0x505, 0xA3}, {0x506, 0x5E}, {0x507, 0x00}, {0x508, 0x2B},
+	{0x509, 0xA4}, {0x50A, 0x5E}, {0x50B, 0x00}, {0x50C, 0x4F},
+	{0x50D, 0xA4}, {0x50E, 0x00}, {0x50F, 0x00}, {0x512, 0x1C},
+	{0x514, 0x0A}, {0x516, 0x0A}, {0x525, 0x4F}, {0x550, 0x10},
+	{0x551, 0x10}, {0x559, 0x02}, {0x55C, 0x28}, {0x55D, 0xFF},
+	{0x605, 0x30}, {0x608, 0x0E}, {0x609, 0x2A}, {0x620, 0xFF},
+	{0x621, 0xFF}, {0x622, 0xFF}, {0x623, 0xFF}, {0x624, 0xFF},
+	{0x625, 0xFF}, {0x626, 0xFF}, {0x627, 0xFF}, {0x638, 0x28},
+	{0x63C, 0x0A}, {0x63D, 0x0A}, {0x63E, 0x0E}, {0x63F, 0x0E},
+	{0x640, 0x40}, {0x642, 0x40}, {0x643, 0x00}, {0x652, 0xC8},
+	{0x66E, 0x05}, {0x700, 0x21}, {0x701, 0x43}, {0x702, 0x65},
+	{0x703, 0x87}, {0x708, 0x21}, {0x709, 0x43}, {0x70A, 0x65},
+	{0x70B, 0x87},
+	{0xffff, 0xff},
+};
+
+static const struct rtl8xxxu_reg32val rtl8188fu_phy_init_table[] = {
+	{0x800, 0x80045700}, {0x804, 0x00000001},
+	{0x808, 0x0000FC00}, {0x80C, 0x0000000A},
+	{0x810, 0x10001331}, {0x814, 0x020C3D10},
+	{0x818, 0x00200385}, {0x81C, 0x00000000},
+	{0x820, 0x01000100}, {0x824, 0x00390204},
+	{0x828, 0x00000000}, {0x82C, 0x00000000},
+	{0x830, 0x00000000}, {0x834, 0x00000000},
+	{0x838, 0x00000000}, {0x83C, 0x00000000},
+	{0x840, 0x00010000}, {0x844, 0x00000000},
+	{0x848, 0x00000000}, {0x84C, 0x00000000},
+	{0x850, 0x00030000}, {0x854, 0x00000000},
+	{0x858, 0x569A569A}, {0x85C, 0x569A569A},
+	{0x860, 0x00000130}, {0x864, 0x00000000},
+	{0x868, 0x00000000}, {0x86C, 0x27272700},
+	{0x870, 0x00000000}, {0x874, 0x25004000},
+	{0x878, 0x00000808}, {0x87C, 0x004F0201},
+	{0x880, 0xB0000B1E}, {0x884, 0x00000007},
+	{0x888, 0x00000000}, {0x88C, 0xCCC000C0},
+	{0x890, 0x00000800}, {0x894, 0xFFFFFFFE},
+	{0x898, 0x40302010}, {0x89C, 0x00706050},
+	{0x900, 0x00000000}, {0x904, 0x00000023},
+	{0x908, 0x00000000}, {0x90C, 0x81121111},
+	{0x910, 0x00000002}, {0x914, 0x00000201},
+	{0x948, 0x99000000}, {0x94C, 0x00000010},
+	{0x950, 0x20003000}, {0x954, 0x4A880000},
+	{0x958, 0x4BC5D87A}, {0x95C, 0x04EB9B79},
+	{0x96C, 0x00000003}, {0xA00, 0x00D047C8},
+	{0xA04, 0x80FF800C}, {0xA08, 0x8C898300},
+	{0xA0C, 0x2E7F120F}, {0xA10, 0x9500BB78},
+	{0xA14, 0x1114D028}, {0xA18, 0x00881117},
+	{0xA1C, 0x89140F00}, {0xA20, 0xD1D80000},
+	{0xA24, 0x5A7DA0BD}, {0xA28, 0x0000223B},
+	{0xA2C, 0x00D30000}, {0xA70, 0x101FBF00},
+	{0xA74, 0x00000007}, {0xA78, 0x00000900},
+	{0xA7C, 0x225B0606}, {0xA80, 0x218075B1},
+	{0xA84, 0x00120000}, {0xA88, 0x040C0000},
+	{0xA8C, 0x12345678}, {0xA90, 0xABCDEF00},
+	{0xA94, 0x001B1B89}, {0xA98, 0x05100000},
+	{0xA9C, 0x3F000000}, {0xAA0, 0x00000000},
+	{0xB2C, 0x00000000}, {0xC00, 0x48071D40},
+	{0xC04, 0x03A05611}, {0xC08, 0x000000E4},
+	{0xC0C, 0x6C6C6C6C}, {0xC10, 0x18800000},
+	{0xC14, 0x40000100}, {0xC18, 0x08800000},
+	{0xC1C, 0x40000100}, {0xC20, 0x00000000},
+	{0xC24, 0x00000000}, {0xC28, 0x00000000},
+	{0xC2C, 0x00000000}, {0xC30, 0x69E9CC4A},
+	{0xC34, 0x31000040}, {0xC38, 0x21688080},
+	{0xC3C, 0x00001714}, {0xC40, 0x1F78403F},
+	{0xC44, 0x00010036}, {0xC48, 0xEC020107},
+	{0xC4C, 0x007F037F}, {0xC50, 0x69553420},
+	{0xC54, 0x43BC0094}, {0xC58, 0x00013169},
+	{0xC5C, 0x00250492}, {0xC60, 0x00000000},
+	{0xC64, 0x7112848B}, {0xC68, 0x47C07BFF},
+	{0xC6C, 0x00000036}, {0xC70, 0x2C7F000D},
+	{0xC74, 0x020600DB}, {0xC78, 0x0000001F},
+	{0xC7C, 0x00B91612}, {0xC80, 0x390000E4},
+	{0xC84, 0x11F60000},
+	{0xC88, 0x40000100}, {0xC8C, 0x20200000},
+	{0xC90, 0x00091521}, {0xC94, 0x00000000},
+	{0xC98, 0x00121820}, {0xC9C, 0x00007F7F},
+	{0xCA0, 0x00000000}, {0xCA4, 0x000300A0},
+	{0xCA8, 0x00000000}, {0xCAC, 0x00000000},
+	{0xCB0, 0x00000000}, {0xCB4, 0x00000000},
+	{0xCB8, 0x00000000}, {0xCBC, 0x28000000},
+	{0xCC0, 0x00000000}, {0xCC4, 0x00000000},
+	{0xCC8, 0x00000000}, {0xCCC, 0x00000000},
+	{0xCD0, 0x00000000}, {0xCD4, 0x00000000},
+	{0xCD8, 0x64B22427}, {0xCDC, 0x00766932},
+	{0xCE0, 0x00222222}, {0xCE4, 0x10000000},
+	{0xCE8, 0x37644302}, {0xCEC, 0x2F97D40C},
+	{0xD00, 0x04030740}, {0xD04, 0x40020401},
+	{0xD08, 0x0000907F}, {0xD0C, 0x20010201},
+	{0xD10, 0xA0633333}, {0xD14, 0x3333BC53},
+	{0xD18, 0x7A8F5B6F}, {0xD2C, 0xCB979975},
+	{0xD30, 0x00000000}, {0xD34, 0x80608000},
+	{0xD38, 0x98000000}, {0xD3C, 0x40127353},
+	{0xD40, 0x00000000}, {0xD44, 0x00000000},
+	{0xD48, 0x00000000}, {0xD4C, 0x00000000},
+	{0xD50, 0x6437140A}, {0xD54, 0x00000000},
+	{0xD58, 0x00000282}, {0xD5C, 0x30032064},
+	{0xD60, 0x4653DE68}, {0xD64, 0x04518A3C},
+	{0xD68, 0x00002101}, {0xD6C, 0x2A201C16},
+	{0xD70, 0x1812362E}, {0xD74, 0x322C2220},
+	{0xD78, 0x000E3C24}, {0xE00, 0x2D2D2D2D},
+	{0xE04, 0x2D2D2D2D}, {0xE08, 0x0390272D},
+	{0xE10, 0x2D2D2D2D}, {0xE14, 0x2D2D2D2D},
+	{0xE18, 0x2D2D2D2D}, {0xE1C, 0x2D2D2D2D},
+	{0xE28, 0x00000000}, {0xE30, 0x1000DC1F},
+	{0xE34, 0x10008C1F}, {0xE38, 0x02140102},
+	{0xE3C, 0x681604C2}, {0xE40, 0x01007C00},
+	{0xE44, 0x01004800}, {0xE48, 0xFB000000},
+	{0xE4C, 0x000028D1}, {0xE50, 0x1000DC1F},
+	{0xE54, 0x10008C1F}, {0xE58, 0x02140102},
+	{0xE5C, 0x28160D05}, {0xE60, 0x00000008},
+	{0xE60, 0x021400A0}, {0xE64, 0x281600A0},
+	{0xE6C, 0x01C00010}, {0xE70, 0x01C00010},
+	{0xE74, 0x02000010}, {0xE78, 0x02000010},
+	{0xE7C, 0x02000010}, {0xE80, 0x02000010},
+	{0xE84, 0x01C00010}, {0xE88, 0x02000010},
+	{0xE8C, 0x01C00010}, {0xED0, 0x01C00010},
+	{0xED4, 0x01C00010}, {0xED8, 0x01C00010},
+	{0xEDC, 0x00000010}, {0xEE0, 0x00000010},
+	{0xEEC, 0x03C00010}, {0xF14, 0x00000003},
+	{0xF4C, 0x00000000}, {0xF00, 0x00000300},
+	{0xffff, 0xffffffff},
+};
+
+static const struct rtl8xxxu_reg32val rtl8188f_agc_table[] = {
+	{0xC78, 0xFC000001}, {0xC78, 0xFB010001},
+	{0xC78, 0xFA020001}, {0xC78, 0xF9030001},
+	{0xC78, 0xF8040001}, {0xC78, 0xF7050001},
+	{0xC78, 0xF6060001}, {0xC78, 0xF5070001},
+	{0xC78, 0xF4080001}, {0xC78, 0xF3090001},
+	{0xC78, 0xF20A0001}, {0xC78, 0xF10B0001},
+	{0xC78, 0xF00C0001}, {0xC78, 0xEF0D0001},
+	{0xC78, 0xEE0E0001}, {0xC78, 0xED0F0001},
+	{0xC78, 0xEC100001}, {0xC78, 0xEB110001},
+	{0xC78, 0xEA120001}, {0xC78, 0xE9130001},
+	{0xC78, 0xE8140001}, {0xC78, 0xE7150001},
+	{0xC78, 0xE6160001}, {0xC78, 0xE5170001},
+	{0xC78, 0xE4180001}, {0xC78, 0xE3190001},
+	{0xC78, 0xE21A0001}, {0xC78, 0xE11B0001},
+	{0xC78, 0xE01C0001}, {0xC78, 0xC21D0001},
+	{0xC78, 0xC11E0001}, {0xC78, 0xC01F0001},
+	{0xC78, 0xA5200001}, {0xC78, 0xA4210001},
+	{0xC78, 0xA3220001}, {0xC78, 0xA2230001},
+	{0xC78, 0xA1240001}, {0xC78, 0xA0250001},
+	{0xC78, 0x65260001}, {0xC78, 0x64270001},
+	{0xC78, 0x63280001}, {0xC78, 0x62290001},
+	{0xC78, 0x612A0001}, {0xC78, 0x442B0001},
+	{0xC78, 0x432C0001}, {0xC78, 0x422D0001},
+	{0xC78, 0x412E0001}, {0xC78, 0x402F0001},
+	{0xC78, 0x21300001}, {0xC78, 0x20310001},
+	{0xC78, 0x05320001}, {0xC78, 0x04330001},
+	{0xC78, 0x03340001}, {0xC78, 0x02350001},
+	{0xC78, 0x01360001}, {0xC78, 0x00370001},
+	{0xC78, 0x00380001}, {0xC78, 0x00390001},
+	{0xC78, 0x003A0001}, {0xC78, 0x003B0001},
+	{0xC78, 0x003C0001}, {0xC78, 0x003D0001},
+	{0xC78, 0x003E0001}, {0xC78, 0x003F0001},
+	{0xC50, 0x69553422}, {0xC50, 0x69553420},
+	{0xffff, 0xffffffff}
+};
+
+static const struct rtl8xxxu_rfregval rtl8188fu_radioa_init_table[] = {
+	{0x00, 0x00030000}, {0x08, 0x00008400},
+	{0x18, 0x00000407}, {0x19, 0x00000012},
+	{0x1B, 0x00001C6C},
+	{0x1E, 0x00080009}, {0x1F, 0x00000880},
+	{0x2F, 0x0001A060}, {0x3F, 0x00028000},
+	{0x42, 0x000060C0}, {0x57, 0x000D0000},
+	{0x58, 0x000C0160}, {0x67, 0x00001552},
+	{0x83, 0x00000000}, {0xB0, 0x000FF9F0},
+	{0xB1, 0x00022218}, {0xB2, 0x00034C00},
+	{0xB4, 0x0004484B}, {0xB5, 0x0000112A},
+	{0xB6, 0x0000053E}, {0xB7, 0x00010408},
+	{0xB8, 0x00010200}, {0xB9, 0x00080001},
+	{0xBA, 0x00040001}, {0xBB, 0x00000400},
+	{0xBF, 0x000C0000}, {0xC2, 0x00002400},
+	{0xC3, 0x00000009}, {0xC4, 0x00040C91},
+	{0xC5, 0x00099999}, {0xC6, 0x000000A3},
+	{0xC7, 0x0008F820}, {0xC8, 0x00076C06},
+	{0xC9, 0x00000000}, {0xCA, 0x00080000},
+	{0xDF, 0x00000180}, {0xEF, 0x000001A0},
+	{0x51, 0x000E8333}, {0x52, 0x000FAC2C},
+	{0x53, 0x00000103}, {0x56, 0x000517F0},
+	{0x35, 0x00000099}, {0x35, 0x00000199},
+	{0x35, 0x00000299}, {0x36, 0x00000064},
+	{0x36, 0x00008064}, {0x36, 0x00010064},
+	{0x36, 0x00018064}, {0x18, 0x00000C07},
+	{0x5A, 0x00048000}, {0x19, 0x000739D0},
+	{0x34, 0x0000ADD6}, {0x34, 0x00009DD3},
+	{0x34, 0x00008CF4}, {0x34, 0x00007CF1},
+	{0x34, 0x00006CEE}, {0x34, 0x00005CEB},
+	{0x34, 0x00004CCE}, {0x34, 0x00003CCB},
+	{0x34, 0x00002CC8}, {0x34, 0x00001C4B},
+	{0x34, 0x00000C48},
+	{0x00, 0x00030159}, {0x84, 0x00048000},
+	{0x86, 0x0000002A}, {0x87, 0x00000025},
+	{0x8E, 0x00065540}, {0x8F, 0x00088000},
+	{0xEF, 0x000020A0}, {0x3B, 0x000F0F00},
+	{0x3B, 0x000E0B00}, {0x3B, 0x000D0900},
+	{0x3B, 0x000C0700}, {0x3B, 0x000B0600},
+	{0x3B, 0x000A0400}, {0x3B, 0x00090200},
+	{0x3B, 0x00080000}, {0x3B, 0x0007BF00},
+	{0x3B, 0x00060B00}, {0x3B, 0x0005C900},
+	{0x3B, 0x00040700}, {0x3B, 0x00030600},
+	{0x3B, 0x0002D500}, {0x3B, 0x00010200},
+	{0x3B, 0x0000E000}, {0xEF, 0x000000A0},
+	{0xEF, 0x00000010}, {0x3B, 0x0000C0A8},
+	{0x3B, 0x00010400}, {0xEF, 0x00000000},
+	{0xEF, 0x00080000}, {0x30, 0x00010000},
+	{0x31, 0x0000000F}, {0x32, 0x00007EFE},
+	{0xEF, 0x00000000}, {0x00, 0x00010159},
+	{0x18, 0x0000FC07}, {0xFE, 0x00000000},
+	{0xFE, 0x00000000}, {0x1F, 0x00080003},
+	{0xFE, 0x00000000}, {0xFE, 0x00000000},
+	{0x1E, 0x00000001}, {0x1F, 0x00080000},
+	{0x00, 0x00033D95},
+	{0xff, 0xffffffff}
+};
+
+static const struct rtl8xxxu_rfregval rtl8188fu_cut_b_radioa_init_table[] = {
+	{0x00, 0x00030000}, {0x08, 0x00008400},
+	{0x18, 0x00000407}, {0x19, 0x00000012},
+	{0x1B, 0x00001C6C},
+	{0x1E, 0x00080009}, {0x1F, 0x00000880},
+	{0x2F, 0x0001A060}, {0x3F, 0x00028000},
+	{0x42, 0x000060C0}, {0x57, 0x000D0000},
+	{0x58, 0x000C0160}, {0x67, 0x00001552},
+	{0x83, 0x00000000}, {0xB0, 0x000FF9F0},
+	{0xB1, 0x00022218}, {0xB2, 0x00034C00},
+	{0xB4, 0x0004484B}, {0xB5, 0x0000112A},
+	{0xB6, 0x0000053E}, {0xB7, 0x00010408},
+	{0xB8, 0x00010200}, {0xB9, 0x00080001},
+	{0xBA, 0x00040001}, {0xBB, 0x00000400},
+	{0xBF, 0x000C0000}, {0xC2, 0x00002400},
+	{0xC3, 0x00000009}, {0xC4, 0x00040C91},
+	{0xC5, 0x00099999}, {0xC6, 0x000000A3},
+	{0xC7, 0x0008F820}, {0xC8, 0x00076C06},
+	{0xC9, 0x00000000}, {0xCA, 0x00080000},
+	{0xDF, 0x00000180}, {0xEF, 0x000001A0},
+	{0x51, 0x000E8231}, {0x52, 0x000FAC2C},
+	{0x53, 0x00000141}, {0x56, 0x000517F0},
+	{0x35, 0x00000090}, {0x35, 0x00000190},
+	{0x35, 0x00000290}, {0x36, 0x00001064},
+	{0x36, 0x00009064}, {0x36, 0x00011064},
+	{0x36, 0x00019064}, {0x18, 0x00000C07},
+	{0x5A, 0x00048000}, {0x19, 0x000739D0},
+	{0x34, 0x0000ADD2}, {0x34, 0x00009DD0},
+	{0x34, 0x00008CF3}, {0x34, 0x00007CF0},
+	{0x34, 0x00006CED}, {0x34, 0x00005CD2},
+	{0x34, 0x00004CCF}, {0x34, 0x00003CCC},
+	{0x34, 0x00002CC9}, {0x34, 0x00001C4C},
+	{0x34, 0x00000C49},
+	{0x00, 0x00030159}, {0x84, 0x00048000},
+	{0x86, 0x0000002A}, {0x87, 0x00000025},
+	{0x8E, 0x00065540}, {0x8F, 0x00088000},
+	{0xEF, 0x000020A0}, {0x3B, 0x000F0F00},
+	{0x3B, 0x000E0B00}, {0x3B, 0x000D0900},
+	{0x3B, 0x000C0700}, {0x3B, 0x000B0600},
+	{0x3B, 0x000A0400}, {0x3B, 0x00090200},
+	{0x3B, 0x00080000}, {0x3B, 0x0007BF00},
+	{0x3B, 0x00060B00}, {0x3B, 0x0005C900},
+	{0x3B, 0x00040700}, {0x3B, 0x00030600},
+	{0x3B, 0x0002D500}, {0x3B, 0x00010200},
+	{0x3B, 0x0000E000}, {0xEF, 0x000000A0},
+	{0xEF, 0x00000010}, {0x3B, 0x0000C0A8},
+	{0x3B, 0x00010400}, {0xEF, 0x00000000},
+	{0xEF, 0x00080000}, {0x30, 0x00010000},
+	{0x31, 0x0000000F}, {0x32, 0x00007EFE},
+	{0xEF, 0x00000000}, {0x00, 0x00010159},
+	{0x18, 0x0000FC07}, {0xFE, 0x00000000},
+	{0xFE, 0x00000000}, {0x1F, 0x00080003},
+	{0xFE, 0x00000000}, {0xFE, 0x00000000},
+	{0x1E, 0x00000001}, {0x1F, 0x00080000},
+	{0x00, 0x00033D95},
+	{0xff, 0xffffffff}
+};
+
+static int rtl8188fu_identify_chip(struct rtl8xxxu_priv *priv)
+{
+	struct device *dev = &priv->udev->dev;
+	u32 sys_cfg, vendor;
+	int ret = 0;
+
+	strscpy(priv->chip_name, "8188FU", sizeof(priv->chip_name));
+	priv->rtl_chip = RTL8188F;
+	priv->rf_paths = 1;
+	priv->rx_paths = 1;
+	priv->tx_paths = 1;
+	priv->has_wifi = 1;
+
+	sys_cfg = rtl8xxxu_read32(priv, REG_SYS_CFG);
+	priv->chip_cut = u32_get_bits(sys_cfg, SYS_CFG_CHIP_VERSION_MASK);
+	if (sys_cfg & SYS_CFG_TRP_VAUX_EN) {
+		dev_info(dev, "Unsupported test chip\n");
+		ret = -ENOTSUPP;
+		goto out;
+	}
+
+	vendor = sys_cfg & SYS_CFG_VENDOR_EXT_MASK;
+	rtl8xxxu_identify_vendor_2bits(priv, vendor);
+
+	ret = rtl8xxxu_config_endpoints_no_sie(priv);
+
+out:
+	return ret;
+}
+
+void rtl8188f_channel_to_group(int channel, int *group, int *cck_group)
+{
+	if (channel < 3)
+		*group = 0;
+	else if (channel < 6)
+		*group = 1;
+	else if (channel < 9)
+		*group = 2;
+	else if (channel < 12)
+		*group = 3;
+	else
+		*group = 4;
+
+	if (channel == 14)
+		*cck_group = 5;
+	else
+		*cck_group = *group;
+}
+
+void
+rtl8188f_set_tx_power(struct rtl8xxxu_priv *priv, int channel, bool ht40)
+{
+	u32 val32, ofdm, mcs;
+	u8 cck, ofdmbase, mcsbase;
+	int group, cck_group;
+
+	rtl8188f_channel_to_group(channel, &group, &cck_group);
+
+	cck = priv->cck_tx_power_index_A[cck_group];
+
+	val32 = rtl8xxxu_read32(priv, REG_TX_AGC_A_CCK1_MCS32);
+	val32 &= 0xffff00ff;
+	val32 |= (cck << 8);
+	rtl8xxxu_write32(priv, REG_TX_AGC_A_CCK1_MCS32, val32);
+
+	val32 = rtl8xxxu_read32(priv, REG_TX_AGC_B_CCK11_A_CCK2_11);
+	val32 &= 0xff;
+	val32 |= ((cck << 8) | (cck << 16) | (cck << 24));
+	rtl8xxxu_write32(priv, REG_TX_AGC_B_CCK11_A_CCK2_11, val32);
+
+	ofdmbase = priv->ht40_1s_tx_power_index_A[group];
+	ofdmbase += priv->ofdm_tx_power_diff[0].a;
+	ofdm = ofdmbase | ofdmbase << 8 | ofdmbase << 16 | ofdmbase << 24;
+
+	rtl8xxxu_write32(priv, REG_TX_AGC_A_RATE18_06, ofdm);
+	rtl8xxxu_write32(priv, REG_TX_AGC_A_RATE54_24, ofdm);
+
+	mcsbase = priv->ht40_1s_tx_power_index_A[group];
+	if (ht40)
+		/* This diff is always 0 - not used in 8188FU. */
+		mcsbase += priv->ht40_tx_power_diff[0].a;
+	else
+		mcsbase += priv->ht20_tx_power_diff[0].a;
+	mcs = mcsbase | mcsbase << 8 | mcsbase << 16 | mcsbase << 24;
+
+	rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS03_MCS00, mcs);
+	rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS07_MCS04, mcs);
+	rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS11_MCS08, mcs);
+	rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS15_MCS12, mcs);
+}
+
+/* A workaround to eliminate the 2400MHz, 2440MHz, 2480MHz spur of 8188F. */
+static void rtl8188f_spur_calibration(struct rtl8xxxu_priv *priv, u8 channel)
+{
+	static const u32 frequencies[14 + 1] = {
+		[5] = 0xFCCD,
+		[6] = 0xFC4D,
+		[7] = 0xFFCD,
+		[8] = 0xFF4D,
+		[11] = 0xFDCD,
+		[13] = 0xFCCD,
+		[14] = 0xFF9A
+	};
+
+	static const u32 reg_d40[14 + 1] = {
+		[5] = 0x06000000,
+		[6] = 0x00000600,
+		[13] = 0x06000000
+	};
+
+	static const u32 reg_d44[14 + 1] = {
+		[11] = 0x04000000
+	};
+
+	static const u32 reg_d4c[14 + 1] = {
+		[7] = 0x06000000,
+		[8] = 0x00000380,
+		[14] = 0x00180000
+	};
+
+	const u8 threshold = 0x16;
+	bool do_notch, hw_ctrl, sw_ctrl, hw_ctrl_s1 = 0, sw_ctrl_s1 = 0;
+	u32 val32, initial_gain, reg948;
+
+	val32 = rtl8xxxu_read32(priv, REG_OFDM0_RX_D_SYNC_PATH);
+	val32 |= GENMASK(28, 24);
+	rtl8xxxu_write32(priv, REG_OFDM0_RX_D_SYNC_PATH, val32);
+
+	/* enable notch filter */
+	val32 = rtl8xxxu_read32(priv, REG_OFDM0_RX_D_SYNC_PATH);
+	val32 |= BIT(9);
+	rtl8xxxu_write32(priv, REG_OFDM0_RX_D_SYNC_PATH, val32);
+
+	if (channel <= 14 && frequencies[channel] > 0) {
+		reg948 = rtl8xxxu_read32(priv, REG_S0S1_PATH_SWITCH);
+		hw_ctrl = reg948 & BIT(6);
+		sw_ctrl = !hw_ctrl;
+
+		if (hw_ctrl) {
+			val32 = rtl8xxxu_read32(priv, REG_FPGA0_XB_RF_INT_OE);
+			val32 &= GENMASK(5, 3);
+			hw_ctrl_s1 = val32 == BIT(3);
+		} else if (sw_ctrl) {
+			sw_ctrl_s1 = !(reg948 & BIT(9));
+		}
+
+		if (hw_ctrl_s1 || sw_ctrl_s1) {
+			initial_gain = rtl8xxxu_read32(priv, REG_OFDM0_XA_AGC_CORE1);
+
+			/* Disable CCK block */
+			val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE);
+			val32 &= ~FPGA_RF_MODE_CCK;
+			rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32);
+
+			val32 = initial_gain & ~OFDM0_X_AGC_CORE1_IGI_MASK;
+			val32 |= 0x30;
+			rtl8xxxu_write32(priv, REG_OFDM0_XA_AGC_CORE1, val32);
+
+			/* disable 3-wire */
+			rtl8xxxu_write32(priv, REG_FPGA0_ANALOG4, 0xccf000c0);
+
+			/* Setup PSD */
+			rtl8xxxu_write32(priv, REG_FPGA0_PSD_FUNC, frequencies[channel]);
+
+			/* Start PSD */
+			rtl8xxxu_write32(priv, REG_FPGA0_PSD_FUNC, 0x400000 | frequencies[channel]);
+
+			msleep(30);
+
+			do_notch = rtl8xxxu_read32(priv, REG_FPGA0_PSD_REPORT) >= threshold;
+
+			/* turn off PSD */
+			rtl8xxxu_write32(priv, REG_FPGA0_PSD_FUNC, frequencies[channel]);
+
+			/* enable 3-wire */
+			rtl8xxxu_write32(priv, REG_FPGA0_ANALOG4, 0xccc000c0);
+
+			/* Enable CCK block */
+			val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE);
+			val32 |= FPGA_RF_MODE_CCK;
+			rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32);
+
+			rtl8xxxu_write32(priv, REG_OFDM0_XA_AGC_CORE1, initial_gain);
+
+			if (do_notch) {
+				rtl8xxxu_write32(priv, REG_OFDM1_CSI_FIX_MASK1, reg_d40[channel]);
+				rtl8xxxu_write32(priv, REG_OFDM1_CSI_FIX_MASK2, reg_d44[channel]);
+				rtl8xxxu_write32(priv, 0xd48, 0x0);
+				rtl8xxxu_write32(priv, 0xd4c, reg_d4c[channel]);
+
+				/* enable CSI mask */
+				val32 = rtl8xxxu_read32(priv, REG_OFDM1_CFO_TRACKING);
+				val32 |= BIT(28);
+				rtl8xxxu_write32(priv, REG_OFDM1_CFO_TRACKING, val32);
+
+				return;
+			}
+		}
+	}
+
+	/* disable CSI mask function */
+	val32 = rtl8xxxu_read32(priv, REG_OFDM1_CFO_TRACKING);
+	val32 &= ~BIT(28);
+	rtl8xxxu_write32(priv, REG_OFDM1_CFO_TRACKING, val32);
+}
+
+static void rtl8188fu_config_channel(struct ieee80211_hw *hw)
+{
+	struct rtl8xxxu_priv *priv = hw->priv;
+	u32 val32;
+	u8 channel, subchannel;
+	bool sec_ch_above;
+
+	channel = (u8)hw->conf.chandef.chan->hw_value;
+
+	/* Set channel */
+	val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_MODE_AG);
+	val32 &= ~MODE_AG_CHANNEL_MASK;
+	val32 |= channel;
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_MODE_AG, val32);
+
+	/* Spur calibration */
+	rtl8188f_spur_calibration(priv, channel);
+
+	/* Set bandwidth mode */
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE);
+	val32 &= ~FPGA_RF_MODE;
+	val32 |= hw->conf.chandef.width == NL80211_CHAN_WIDTH_40;
+	rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32);
+
+	val32 = rtl8xxxu_read32(priv, REG_FPGA1_RF_MODE);
+	val32 &= ~FPGA_RF_MODE;
+	val32 |= hw->conf.chandef.width == NL80211_CHAN_WIDTH_40;
+	rtl8xxxu_write32(priv, REG_FPGA1_RF_MODE, val32);
+
+	/* RXADC CLK */
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE);
+	val32 |= GENMASK(10, 8);
+	rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32);
+
+	/* TXDAC CLK */
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE);
+	val32 |= BIT(14) | BIT(12);
+	val32 &= ~BIT(13);
+	rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32);
+
+	/* small BW */
+	val32 = rtl8xxxu_read32(priv, REG_OFDM0_TX_PSDO_NOISE_WEIGHT);
+	val32 &= ~GENMASK(31, 30);
+	rtl8xxxu_write32(priv, REG_OFDM0_TX_PSDO_NOISE_WEIGHT, val32);
+
+	/* adc buffer clk */
+	val32 = rtl8xxxu_read32(priv, REG_OFDM0_TX_PSDO_NOISE_WEIGHT);
+	val32 &= ~BIT(29);
+	val32 |= BIT(28);
+	rtl8xxxu_write32(priv, REG_OFDM0_TX_PSDO_NOISE_WEIGHT, val32);
+
+	/* adc buffer clk */
+	val32 = rtl8xxxu_read32(priv, REG_OFDM0_XA_RX_AFE);
+	val32 &= ~BIT(29);
+	val32 |= BIT(28);
+	rtl8xxxu_write32(priv, REG_OFDM0_XA_RX_AFE, val32);
+
+	val32 = rtl8xxxu_read32(priv, REG_OFDM_RX_DFIR);
+	val32 &= ~BIT(19);
+	rtl8xxxu_write32(priv, REG_OFDM_RX_DFIR, val32);
+
+	val32 = rtl8xxxu_read32(priv, REG_OFDM_RX_DFIR);
+	val32 &= ~GENMASK(23, 20);
+	val32 |= BIT(21);
+	if (hw->conf.chandef.width == NL80211_CHAN_WIDTH_20 ||
+	    hw->conf.chandef.width == NL80211_CHAN_WIDTH_20_NOHT)
+		val32 |= BIT(20);
+	else if (hw->conf.chandef.width == NL80211_CHAN_WIDTH_40)
+		val32 |= BIT(22);
+	rtl8xxxu_write32(priv, REG_OFDM_RX_DFIR, val32);
+
+	if (hw->conf.chandef.width == NL80211_CHAN_WIDTH_40) {
+		if (hw->conf.chandef.center_freq1 >
+		    hw->conf.chandef.chan->center_freq) {
+			sec_ch_above = 1;
+			channel += 2;
+		} else {
+			sec_ch_above = 0;
+			channel -= 2;
+		}
+
+		/* Set Control channel to upper or lower. */
+		val32 = rtl8xxxu_read32(priv, REG_CCK0_SYSTEM);
+		val32 &= ~CCK0_SIDEBAND;
+		if (!sec_ch_above)
+			val32 |= CCK0_SIDEBAND;
+		rtl8xxxu_write32(priv, REG_CCK0_SYSTEM, val32);
+
+		val32 = rtl8xxxu_read32(priv, REG_DATA_SUBCHANNEL);
+		val32 &= ~GENMASK(3, 0);
+		if (sec_ch_above)
+			subchannel = 2;
+		else
+			subchannel = 1;
+		val32 |= subchannel;
+		rtl8xxxu_write32(priv, REG_DATA_SUBCHANNEL, val32);
+
+		val32 = rtl8xxxu_read32(priv, REG_RESPONSE_RATE_SET);
+		val32 &= ~RSR_RSC_BANDWIDTH_40M;
+		rtl8xxxu_write32(priv, REG_RESPONSE_RATE_SET, val32);
+	}
+
+	/* RF TRX_BW */
+	val32 = channel;
+	if (hw->conf.chandef.width == NL80211_CHAN_WIDTH_20 ||
+	    hw->conf.chandef.width == NL80211_CHAN_WIDTH_20_NOHT)
+		val32 |= MODE_AG_BW_20MHZ_8723B;
+	else if (hw->conf.chandef.width == NL80211_CHAN_WIDTH_40)
+		val32 |= MODE_AG_BW_40MHZ_8723B;
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_MODE_AG, val32);
+
+	/* FILTER BW&RC Corner (ACPR) */
+	if (hw->conf.chandef.width == NL80211_CHAN_WIDTH_20 ||
+	    hw->conf.chandef.width == NL80211_CHAN_WIDTH_20_NOHT)
+		val32 = 0x00065;
+	else if (hw->conf.chandef.width == NL80211_CHAN_WIDTH_40)
+		val32 = 0x00025;
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RXG_MIX_SWBW, val32);
+
+	if (hw->conf.chandef.width == NL80211_CHAN_WIDTH_20 ||
+	    hw->conf.chandef.width == NL80211_CHAN_WIDTH_20_NOHT)
+		val32 = 0x0;
+	else if (hw->conf.chandef.width == NL80211_CHAN_WIDTH_40)
+		val32 = 0x01000;
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RX_BB2, val32);
+
+	/* RC Corner */
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_GAIN_CCA, 0x00140);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RX_G2, 0x01c6c);
+}
+
+static void rtl8188fu_init_aggregation(struct rtl8xxxu_priv *priv)
+{
+	u8 agg_ctrl, rxdma_mode, usb_tx_agg_desc_num = 6;
+	u32 agg_rx, val32;
+
+	/* TX aggregation */
+	val32 = rtl8xxxu_read32(priv, REG_DWBCN0_CTRL_8188F);
+	val32 &= ~(0xf << 4);
+	val32 |= usb_tx_agg_desc_num << 4;
+	rtl8xxxu_write32(priv, REG_DWBCN0_CTRL_8188F, val32);
+	rtl8xxxu_write8(priv, REG_DWBCN1_CTRL_8723B, usb_tx_agg_desc_num << 1);
+
+	/* RX aggregation */
+	agg_ctrl = rtl8xxxu_read8(priv, REG_TRXDMA_CTRL);
+	agg_ctrl &= ~TRXDMA_CTRL_RXDMA_AGG_EN;
+
+	agg_rx = rtl8xxxu_read32(priv, REG_RXDMA_AGG_PG_TH);
+	agg_rx &= ~RXDMA_USB_AGG_ENABLE;
+	agg_rx &= ~0xFF0F; /* reset agg size and timeout */
+
+	rxdma_mode = rtl8xxxu_read8(priv, REG_RXDMA_PRO_8723B);
+	rxdma_mode &= ~BIT(1);
+
+	rtl8xxxu_write8(priv, REG_TRXDMA_CTRL, agg_ctrl);
+	rtl8xxxu_write32(priv, REG_RXDMA_AGG_PG_TH, agg_rx);
+	rtl8xxxu_write8(priv, REG_RXDMA_PRO_8723B, rxdma_mode);
+}
+
+static void rtl8188fu_init_statistics(struct rtl8xxxu_priv *priv)
+{
+	u32 val32;
+
+	/* Time duration for NHM unit: 4us, 0xc350=200ms */
+	rtl8xxxu_write16(priv, REG_NHM_TIMER_8723B + 2, 0xc350);
+	rtl8xxxu_write16(priv, REG_NHM_TH9_TH10_8723B + 2, 0xffff);
+	rtl8xxxu_write32(priv, REG_NHM_TH3_TO_TH0_8723B, 0xffffff50);
+	rtl8xxxu_write32(priv, REG_NHM_TH7_TO_TH4_8723B, 0xffffffff);
+
+	/* TH8 */
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+	val32 |= 0xff;
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+
+	/* Enable CCK */
+	val32 = rtl8xxxu_read32(priv, REG_NHM_TH9_TH10_8723B);
+	val32 &= ~(BIT(8) | BIT(9) | BIT(10));
+	val32 |= BIT(8);
+	rtl8xxxu_write32(priv, REG_NHM_TH9_TH10_8723B, val32);
+
+	/* Max power amongst all RX antennas */
+	val32 = rtl8xxxu_read32(priv, REG_OFDM0_FA_RSTC);
+	val32 |= BIT(7);
+	rtl8xxxu_write32(priv, REG_OFDM0_FA_RSTC, val32);
+}
+
+static int rtl8188fu_parse_efuse(struct rtl8xxxu_priv *priv)
+{
+	struct rtl8188fu_efuse *efuse = &priv->efuse_wifi.efuse8188fu;
+
+	if (efuse->rtl_id != cpu_to_le16(0x8129))
+		return -EINVAL;
+
+	ether_addr_copy(priv->mac_addr, efuse->mac_addr);
+
+	memcpy(priv->cck_tx_power_index_A, efuse->tx_power_index_A.cck_base,
+	       sizeof(efuse->tx_power_index_A.cck_base));
+
+	memcpy(priv->ht40_1s_tx_power_index_A,
+	       efuse->tx_power_index_A.ht40_base,
+	       sizeof(efuse->tx_power_index_A.ht40_base));
+
+	priv->ofdm_tx_power_diff[0].a = efuse->tx_power_index_A.ht20_ofdm_1s_diff.a;
+	priv->ht20_tx_power_diff[0].a = efuse->tx_power_index_A.ht20_ofdm_1s_diff.b;
+
+	priv->default_crystal_cap = efuse->xtal_k & 0x3f;
+
+	return 0;
+}
+
+static int rtl8188fu_load_firmware(struct rtl8xxxu_priv *priv)
+{
+	const char *fw_name;
+	int ret;
+
+	fw_name = "rtlwifi/rtl8188fufw.bin";
+
+	ret = rtl8xxxu_load_firmware(priv, fw_name);
+
+	return ret;
+}
+
+static void rtl8188fu_init_phy_bb(struct rtl8xxxu_priv *priv)
+{
+	u8 val8;
+	u16 val16;
+
+	/* Enable BB and RF */
+	val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC);
+	val16 |= SYS_FUNC_BB_GLB_RSTN | SYS_FUNC_BBRSTB | SYS_FUNC_DIO_RF;
+	rtl8xxxu_write16(priv, REG_SYS_FUNC, val16);
+
+	/*
+	 * Per vendor driver, run power sequence before init of RF
+	 */
+	val8 = RF_ENABLE | RF_RSTB | RF_SDMRSTB;
+	rtl8xxxu_write8(priv, REG_RF_CTRL, val8);
+
+	usleep_range(10, 20);
+
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_IQADJ_G1, 0x780);
+
+	val8 = SYS_FUNC_BB_GLB_RSTN | SYS_FUNC_BBRSTB | SYS_FUNC_USBA | SYS_FUNC_USBD;
+	rtl8xxxu_write8(priv, REG_SYS_FUNC, val8);
+
+	rtl8xxxu_init_phy_regs(priv, rtl8188fu_phy_init_table);
+	rtl8xxxu_init_phy_regs(priv, rtl8188f_agc_table);
+}
+
+static int rtl8188fu_init_phy_rf(struct rtl8xxxu_priv *priv)
+{
+	int ret;
+
+	if (priv->chip_cut == 1)
+		ret = rtl8xxxu_init_phy_rf(priv, rtl8188fu_cut_b_radioa_init_table, RF_A);
+	else
+		ret = rtl8xxxu_init_phy_rf(priv, rtl8188fu_radioa_init_table, RF_A);
+
+	return ret;
+}
+
+void rtl8188f_phy_lc_calibrate(struct rtl8xxxu_priv *priv)
+{
+	u32 val32;
+	u32 rf_amode, lstf;
+	int i;
+
+	/* Check continuous TX and Packet TX */
+	lstf = rtl8xxxu_read32(priv, REG_OFDM1_LSTF);
+
+	if (lstf & OFDM_LSTF_MASK) {
+		/* Disable all continuous TX */
+		val32 = lstf & ~OFDM_LSTF_MASK;
+		rtl8xxxu_write32(priv, REG_OFDM1_LSTF, val32);
+	} else {
+		/* Deal with Packet TX case */
+		/* block all queues */
+		rtl8xxxu_write8(priv, REG_TXPAUSE, 0xff);
+	}
+
+	/* Read original RF mode Path A */
+	rf_amode = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_MODE_AG);
+
+	/* Start LC calibration */
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_MODE_AG, rf_amode | 0x08000);
+
+	for (i = 0; i < 100; i++) {
+		if ((rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_MODE_AG) & 0x08000) == 0)
+			break;
+		msleep(10);
+	}
+
+	if (i == 100)
+		dev_warn(&priv->udev->dev, "LC calibration timed out.\n");
+
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_MODE_AG, rf_amode);
+
+	/* Restore original parameters */
+	if (lstf & OFDM_LSTF_MASK)
+		rtl8xxxu_write32(priv, REG_OFDM1_LSTF, lstf);
+	else /*  Deal with Packet TX case */
+		rtl8xxxu_write8(priv, REG_TXPAUSE, 0x00);
+}
+
+static int rtl8188fu_iqk_path_a(struct rtl8xxxu_priv *priv, u32 *lok_result)
+{
+	u32 reg_eac, reg_e94, reg_e9c, val32;
+	int result = 0;
+
+	/*
+	 * Leave IQK mode
+	 */
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+	val32 &= 0x000000ff;
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+
+	/*
+	 * Enable path A PA in TX IQK mode
+	 */
+	val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT);
+	val32 |= 0x80000;
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x20000);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0000f);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0x07ff7);
+
+	/* PA,PAD gain adjust */
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_GAIN_CCA, 0x980);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_PAD_TXG, 0x5102a);
+
+	/* enter IQK mode */
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+	val32 &= 0x000000ff;
+	val32 |= 0x80800000;
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+
+	/* path-A IQK setting */
+	rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x18008c1c);
+	rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x38008c1c);
+
+	rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x821403ff);
+	rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x28160000);
+
+	/* LO calibration setting */
+	rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x00462911);
+
+	/* One shot, path A LOK & IQK */
+	rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000);
+	rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000);
+
+	mdelay(25);
+
+	/*
+	 * Leave IQK mode
+	 */
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+	val32 &= 0x000000ff;
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_GAIN_CCA, 0x180);
+
+	/* save LOK result */
+	*lok_result = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_TXM_IDAC);
+
+	/* Check failed */
+	reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2);
+	reg_e94 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_A);
+	reg_e9c = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_A);
+
+	if (!(reg_eac & BIT(28)) &&
+	    ((reg_e94 & 0x03ff0000) != 0x01420000) &&
+	    ((reg_e9c & 0x03ff0000) != 0x00420000))
+		result |= 0x01;
+
+	return result;
+}
+
+static int rtl8188fu_rx_iqk_path_a(struct rtl8xxxu_priv *priv, u32 lok_result)
+{
+	u32 reg_ea4, reg_eac, reg_e94, reg_e9c, val32;
+	int result = 0;
+
+	/*
+	 * Leave IQK mode
+	 */
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+	val32 &= 0x000000ff;
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+
+	/*
+	 * Enable path A PA in TX IQK mode
+	 */
+	val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT);
+	val32 |= 0x80000;
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x30000);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0000f);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf1173);
+
+	/* PA,PAD gain adjust */
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_GAIN_CCA, 0x980);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_PAD_TXG, 0x5102a);
+
+	/*
+	 * Enter IQK mode
+	 */
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+	val32 &= 0x000000ff;
+	val32 |= 0x80800000;
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+
+	/*
+	 * Tx IQK setting
+	 */
+	rtl8xxxu_write32(priv, REG_TX_IQK, 0x01007c00);
+	rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800);
+
+	/* path-A IQK setting */
+	rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x10008c1c);
+	rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x30008c1c);
+
+	rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x82160fff);
+	rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x28160000);
+
+	/* LO calibration setting */
+	rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x00462911);
+
+	/* One shot, path A LOK & IQK */
+	rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000);
+	rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000);
+
+	mdelay(25);
+
+	/*
+	 * Leave IQK mode
+	 */
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+	val32 &= 0x000000ff;
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_GAIN_CCA, 0x180);
+
+	/* Check failed */
+	reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2);
+	reg_e94 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_A);
+	reg_e9c = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_A);
+
+	if (!(reg_eac & BIT(28)) &&
+	    ((reg_e94 & 0x03ff0000) != 0x01420000) &&
+	    ((reg_e9c & 0x03ff0000) != 0x00420000))
+		result |= 0x01;
+	else /* If TX not OK, ignore RX */
+		goto out;
+
+	val32 = 0x80007c00 | (reg_e94 & 0x3ff0000) |
+		((reg_e9c & 0x3ff0000) >> 16);
+	rtl8xxxu_write32(priv, REG_TX_IQK, val32);
+
+	/*
+	 * Modify RX IQK mode table
+	 */
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+	val32 &= 0x000000ff;
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+
+	val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT);
+	val32 |= 0x80000;
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x30000);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0000f);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf7ff2);
+
+	/*
+	 * PA, PAD setting
+	 */
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_GAIN_CCA, 0x980);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_PAD_TXG, 0x51000);
+
+	/*
+	 * Enter IQK mode
+	 */
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+	val32 &= 0x000000ff;
+	val32 |= 0x80800000;
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+
+	/*
+	 * RX IQK setting
+	 */
+	rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800);
+
+	/* path-A IQK setting */
+	rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x30008c1c);
+	rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x10008c1c);
+
+	rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x82160000);
+	rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x281613ff);
+
+	/* LO calibration setting */
+	rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x0046a911);
+
+	/* One shot, path A LOK & IQK */
+	rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000);
+	rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000);
+
+	mdelay(25);
+
+	/*
+	 * Leave IQK mode
+	 */
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+	val32 &= 0x000000ff;
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_GAIN_CCA, 0x180);
+
+	/* reload LOK value */
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXM_IDAC, lok_result);
+
+	/* Check failed */
+	reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2);
+	reg_ea4 = rtl8xxxu_read32(priv, REG_RX_POWER_BEFORE_IQK_A_2);
+
+	if (!(reg_eac & BIT(27)) &&
+	    ((reg_ea4 & 0x03ff0000) != 0x01320000) &&
+	    ((reg_eac & 0x03ff0000) != 0x00360000))
+		result |= 0x02;
+
+out:
+	return result;
+}
+
+static void rtl8188fu_phy_iqcalibrate(struct rtl8xxxu_priv *priv,
+				      int result[][8], int t)
+{
+	struct device *dev = &priv->udev->dev;
+	u32 i, val32, rx_initial_gain, lok_result;
+	u32 path_sel_bb, path_sel_rf;
+	int path_a_ok;
+	int retry = 2;
+	static const u32 adda_regs[RTL8XXXU_ADDA_REGS] = {
+		REG_FPGA0_XCD_SWITCH_CTRL, REG_BLUETOOTH,
+		REG_RX_WAIT_CCA, REG_TX_CCK_RFON,
+		REG_TX_CCK_BBON, REG_TX_OFDM_RFON,
+		REG_TX_OFDM_BBON, REG_TX_TO_RX,
+		REG_TX_TO_TX, REG_RX_CCK,
+		REG_RX_OFDM, REG_RX_WAIT_RIFS,
+		REG_RX_TO_RX, REG_STANDBY,
+		REG_SLEEP, REG_PMPD_ANAEN
+	};
+	static const u32 iqk_mac_regs[RTL8XXXU_MAC_REGS] = {
+		REG_TXPAUSE, REG_BEACON_CTRL,
+		REG_BEACON_CTRL_1, REG_GPIO_MUXCFG
+	};
+	static const u32 iqk_bb_regs[RTL8XXXU_BB_REGS] = {
+		REG_OFDM0_TRX_PATH_ENABLE, REG_OFDM0_TR_MUX_PAR,
+		REG_FPGA0_XCD_RF_SW_CTRL, REG_CONFIG_ANT_A, REG_CONFIG_ANT_B,
+		REG_FPGA0_XAB_RF_SW_CTRL, REG_FPGA0_XA_RF_INT_OE,
+		REG_FPGA0_XB_RF_INT_OE, REG_FPGA0_RF_MODE
+	};
+
+	/*
+	 * Note: IQ calibration must be performed after loading
+	 *       PHY_REG.txt , and radio_a, radio_b.txt
+	 */
+
+	rx_initial_gain = rtl8xxxu_read32(priv, REG_OFDM0_XA_AGC_CORE1);
+
+	if (t == 0) {
+		/* Save ADDA parameters, turn Path A ADDA on */
+		rtl8xxxu_save_regs(priv, adda_regs, priv->adda_backup,
+				   RTL8XXXU_ADDA_REGS);
+		rtl8xxxu_save_mac_regs(priv, iqk_mac_regs, priv->mac_backup);
+		rtl8xxxu_save_regs(priv, iqk_bb_regs,
+				   priv->bb_backup, RTL8XXXU_BB_REGS);
+	}
+
+	rtl8xxxu_path_adda_on(priv, adda_regs, true);
+
+	if (t == 0) {
+		val32 = rtl8xxxu_read32(priv, REG_FPGA0_XA_HSSI_PARM1);
+		priv->pi_enabled = u32_get_bits(val32, FPGA0_HSSI_PARM1_PI);
+	}
+
+	/* save RF path */
+	path_sel_bb = rtl8xxxu_read32(priv, REG_S0S1_PATH_SWITCH);
+	path_sel_rf = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_S0S1);
+
+	/* BB setting */
+	rtl8xxxu_write32(priv, REG_OFDM0_TRX_PATH_ENABLE, 0x03a05600);
+	rtl8xxxu_write32(priv, REG_OFDM0_TR_MUX_PAR, 0x000800e4);
+	rtl8xxxu_write32(priv, REG_FPGA0_XCD_RF_SW_CTRL, 0x25204000);
+
+	/* MAC settings */
+	val32 = rtl8xxxu_read32(priv, REG_TX_PTCL_CTRL);
+	val32 |= 0x00ff0000;
+	rtl8xxxu_write32(priv, REG_TX_PTCL_CTRL, val32);
+
+	/* IQ calibration setting */
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+	val32 &= 0xff;
+	val32 |= 0x80800000;
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+	rtl8xxxu_write32(priv, REG_TX_IQK, 0x01007c00);
+	rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800);
+
+	for (i = 0; i < retry; i++) {
+		path_a_ok = rtl8188fu_iqk_path_a(priv, &lok_result);
+		if (path_a_ok == 0x01) {
+			val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+			val32 &= 0xff;
+			rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+
+			val32 = rtl8xxxu_read32(priv,
+						REG_TX_POWER_BEFORE_IQK_A);
+			result[t][0] = (val32 >> 16) & 0x3ff;
+
+			val32 = rtl8xxxu_read32(priv,
+						REG_TX_POWER_AFTER_IQK_A);
+			result[t][1] = (val32 >> 16) & 0x3ff;
+			break;
+		}
+	}
+
+	for (i = 0; i < retry; i++) {
+		path_a_ok = rtl8188fu_rx_iqk_path_a(priv, lok_result);
+		if (path_a_ok == 0x03) {
+			val32 = rtl8xxxu_read32(priv,
+						REG_RX_POWER_BEFORE_IQK_A_2);
+			result[t][2] = (val32 >> 16) & 0x3ff;
+
+			val32 = rtl8xxxu_read32(priv,
+						REG_RX_POWER_AFTER_IQK_A_2);
+			result[t][3] = (val32 >> 16) & 0x3ff;
+			break;
+		}
+	}
+
+	if (!path_a_ok)
+		dev_dbg(dev, "%s: Path A IQK failed!\n", __func__);
+
+	/* Back to BB mode, load original value */
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+	val32 &= 0xff;
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+
+	if (t == 0)
+		return;
+
+	if (!priv->pi_enabled) {
+		/*
+		 * Switch back BB to SI mode after finishing
+		 * IQ Calibration
+		 */
+		val32 = 0x01000000;
+		rtl8xxxu_write32(priv, REG_FPGA0_XA_HSSI_PARM1, val32);
+		rtl8xxxu_write32(priv, REG_FPGA0_XB_HSSI_PARM1, val32);
+	}
+
+	/* Reload ADDA power saving parameters */
+	rtl8xxxu_restore_regs(priv, adda_regs, priv->adda_backup,
+			      RTL8XXXU_ADDA_REGS);
+
+	/* Reload MAC parameters */
+	rtl8xxxu_restore_mac_regs(priv, iqk_mac_regs, priv->mac_backup);
+
+	/* Reload BB parameters */
+	rtl8xxxu_restore_regs(priv, iqk_bb_regs,
+			      priv->bb_backup, RTL8XXXU_BB_REGS);
+
+	/* Reload RF path */
+	rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, path_sel_bb);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_S0S1, path_sel_rf);
+
+	/* Restore RX initial gain */
+	val32 = rtl8xxxu_read32(priv, REG_OFDM0_XA_AGC_CORE1);
+	val32 &= 0xffffff00;
+	val32 |= 0x50;
+	rtl8xxxu_write32(priv, REG_OFDM0_XA_AGC_CORE1, val32);
+	val32 = rtl8xxxu_read32(priv, REG_OFDM0_XA_AGC_CORE1);
+	val32 &= 0xffffff00;
+	val32 |= rx_initial_gain & 0xff;
+	rtl8xxxu_write32(priv, REG_OFDM0_XA_AGC_CORE1, val32);
+
+	/* Load 0xe30 IQC default value */
+	rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x01008c00);
+	rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x01008c00);
+}
+
+static void rtl8188fu_phy_iq_calibrate(struct rtl8xxxu_priv *priv)
+{
+	struct device *dev = &priv->udev->dev;
+	int result[4][8]; /* last is final result */
+	int i, candidate;
+	bool path_a_ok;
+	u32 reg_e94, reg_e9c, reg_ea4, reg_eac;
+	u32 reg_eb4, reg_ebc, reg_ec4, reg_ecc;
+	s32 reg_tmp = 0;
+	bool simu;
+	u32 path_sel_bb, path_sel_rf;
+
+	/* Save RF path */
+	path_sel_bb = rtl8xxxu_read32(priv, REG_S0S1_PATH_SWITCH);
+	path_sel_rf = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_S0S1);
+
+	memset(result, 0, sizeof(result));
+	candidate = -1;
+
+	path_a_ok = false;
+
+	for (i = 0; i < 3; i++) {
+		rtl8188fu_phy_iqcalibrate(priv, result, i);
+
+		if (i == 1) {
+			simu = rtl8xxxu_gen2_simularity_compare(priv, result, 0, 1);
+			if (simu) {
+				candidate = 0;
+				break;
+			}
+		}
+
+		if (i == 2) {
+			simu = rtl8xxxu_gen2_simularity_compare(priv, result, 0, 2);
+			if (simu) {
+				candidate = 0;
+				break;
+			}
+
+			simu = rtl8xxxu_gen2_simularity_compare(priv, result, 1, 2);
+			if (simu) {
+				candidate = 1;
+			} else {
+				for (i = 0; i < 8; i++)
+					reg_tmp += result[3][i];
+
+				if (reg_tmp)
+					candidate = 3;
+				else
+					candidate = -1;
+			}
+		}
+	}
+
+	for (i = 0; i < 4; i++) {
+		reg_e94 = result[i][0];
+		reg_e9c = result[i][1];
+		reg_ea4 = result[i][2];
+		reg_eac = result[i][3];
+		reg_eb4 = result[i][4];
+		reg_ebc = result[i][5];
+		reg_ec4 = result[i][6];
+		reg_ecc = result[i][7];
+	}
+
+	if (candidate >= 0) {
+		reg_e94 = result[candidate][0];
+		priv->rege94 =  reg_e94;
+		reg_e9c = result[candidate][1];
+		priv->rege9c = reg_e9c;
+		reg_ea4 = result[candidate][2];
+		reg_eac = result[candidate][3];
+		reg_eb4 = result[candidate][4];
+		priv->regeb4 = reg_eb4;
+		reg_ebc = result[candidate][5];
+		priv->regebc = reg_ebc;
+		reg_ec4 = result[candidate][6];
+		reg_ecc = result[candidate][7];
+		dev_dbg(dev, "%s: candidate is %x\n", __func__, candidate);
+		dev_dbg(dev,
+			"%s: e94 =%x e9c=%x ea4=%x eac=%x eb4=%x ebc=%x ec4=%x ecc=%x\n",
+			__func__, reg_e94, reg_e9c,
+			reg_ea4, reg_eac, reg_eb4, reg_ebc, reg_ec4, reg_ecc);
+		path_a_ok = true;
+	} else {
+		reg_e94 = reg_eb4 = priv->rege94 = priv->regeb4 = 0x100;
+		reg_e9c = reg_ebc = priv->rege9c = priv->regebc = 0x0;
+	}
+
+	if (reg_e94 && candidate >= 0)
+		rtl8xxxu_fill_iqk_matrix_a(priv, path_a_ok, result,
+					   candidate, (reg_ea4 == 0));
+
+	rtl8xxxu_save_regs(priv, rtl8xxxu_iqk_phy_iq_bb_reg,
+			   priv->bb_recovery_backup, RTL8XXXU_BB_REGS);
+
+	rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, path_sel_bb);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_S0S1, path_sel_rf);
+}
+
+static void rtl8188f_disabled_to_emu(struct rtl8xxxu_priv *priv)
+{
+	u16 val8;
+
+	/* 0x04[12:11] = 2b'01enable WL suspend */
+	val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
+	val8 &= ~((APS_FSMCO_PCIE | APS_FSMCO_HW_SUSPEND) >> 8);
+	rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8);
+
+	/* 0xC4[4] <= 1, turn off USB APHY LDO under suspend mode */
+	val8 = rtl8xxxu_read8(priv, 0xc4);
+	val8 &= ~BIT(4);
+	rtl8xxxu_write8(priv, 0xc4, val8);
+}
+
+static int rtl8188f_emu_to_active(struct rtl8xxxu_priv *priv)
+{
+	u8 val8;
+	u32 val32;
+	int count, ret = 0;
+
+	/* Disable SW LPS */
+	val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
+	val8 &= ~(APS_FSMCO_SW_LPS >> 8);
+	rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8);
+
+	/* wait till 0x04[17] = 1 power ready */
+	for (count = RTL8XXXU_MAX_REG_POLL; count; count--) {
+		val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO);
+		if (val32 & BIT(17))
+			break;
+
+		udelay(10);
+	}
+
+	if (!count) {
+		ret = -EBUSY;
+		goto exit;
+	}
+
+	/* Disable HWPDN */
+	val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
+	val8 &= ~(APS_FSMCO_HW_POWERDOWN >> 8);
+	rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8);
+
+	/* Disable WL suspend */
+	val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
+	val8 &= ~(APS_FSMCO_HW_SUSPEND >> 8);
+	rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8);
+
+	/* set, then poll until 0 */
+	val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
+	val8 |= APS_FSMCO_MAC_ENABLE >> 8;
+	rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8);
+
+	for (count = RTL8XXXU_MAX_REG_POLL; count; count--) {
+		val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO);
+		if ((val32 & APS_FSMCO_MAC_ENABLE) == 0) {
+			ret = 0;
+			break;
+		}
+		udelay(10);
+	}
+
+	if (!count) {
+		ret = -EBUSY;
+		goto exit;
+	}
+
+	/* 0x27<=35 to reduce RF noise */
+	val8 = rtl8xxxu_write8(priv, 0x27, 0x35);
+exit:
+	return ret;
+}
+
+static int rtl8188fu_active_to_emu(struct rtl8xxxu_priv *priv)
+{
+	u8 val8;
+	u32 val32;
+	int count, ret = 0;
+
+	/* Turn off RF */
+	rtl8xxxu_write8(priv, REG_RF_CTRL, 0);
+
+	/* 0x4C[23] = 0x4E[7] = 0, switch DPDT_SEL_P output from register 0x65[2] */
+	val8 = rtl8xxxu_read8(priv, 0x4e);
+	val8 &= ~BIT(7);
+	rtl8xxxu_write8(priv, 0x4e, val8);
+
+	/* 0x27 <= 34, xtal_qsel = 0 to xtal bring up */
+	rtl8xxxu_write8(priv, 0x27, 0x34);
+
+	/* 0x04[9] = 1 turn off MAC by HW state machine */
+	val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
+	val8 |= APS_FSMCO_MAC_OFF >> 8;
+	rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8);
+
+	for (count = RTL8XXXU_MAX_REG_POLL; count; count--) {
+		val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO);
+		if ((val32 & APS_FSMCO_MAC_OFF) == 0) {
+			ret = 0;
+			break;
+		}
+		udelay(10);
+	}
+
+	if (!count) {
+		ret = -EBUSY;
+		goto exit;
+	}
+
+exit:
+	return ret;
+}
+
+static int rtl8188fu_emu_to_disabled(struct rtl8xxxu_priv *priv)
+{
+	u8 val8;
+
+	/* 0x04[12:11] = 2b'01 enable WL suspend */
+	val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
+	val8 &= ~((APS_FSMCO_PCIE | APS_FSMCO_HW_SUSPEND) >> 8);
+	val8 |= APS_FSMCO_HW_SUSPEND >> 8;
+	rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8);
+
+	/* 0xC4[4] <= 1, turn off USB APHY LDO under suspend mode */
+	val8 = rtl8xxxu_read8(priv, 0xc4);
+	val8 |= BIT(4);
+	rtl8xxxu_write8(priv, 0xc4, val8);
+
+	return 0;
+}
+
+static int rtl8188fu_active_to_lps(struct rtl8xxxu_priv *priv)
+{
+	struct device *dev = &priv->udev->dev;
+	u8 val8;
+	u16 val16;
+	u32 val32;
+	int retry, retval;
+
+	/* set RPWM IMR */
+	val8 = rtl8xxxu_read8(priv, REG_FTIMR + 1);
+	val8 |= IMR0_CPWM >> 8;
+	rtl8xxxu_write8(priv, REG_FTIMR + 1, val8);
+
+	/* Tx Pause */
+	rtl8xxxu_write8(priv, REG_TXPAUSE, 0xff);
+
+	retry = 100;
+	retval = -EBUSY;
+
+	/*
+	 * Poll 32 bit wide REG_SCH_TX_CMD for 0x00000000 to ensure no TX is pending.
+	 */
+	do {
+		val32 = rtl8xxxu_read32(priv, REG_SCH_TX_CMD);
+		if (!val32) {
+			retval = 0;
+			break;
+		}
+	} while (retry--);
+
+	if (!retry) {
+		dev_warn(dev, "Failed to flush TX queue\n");
+		retval = -EBUSY;
+		goto out;
+	}
+
+	/* Disable CCK and OFDM, clock gated */
+	val8 = rtl8xxxu_read8(priv, REG_SYS_FUNC);
+	val8 &= ~SYS_FUNC_BBRSTB;
+	rtl8xxxu_write8(priv, REG_SYS_FUNC, val8);
+
+	udelay(2);
+
+	/* Whole BB is reset */
+	val8 = rtl8xxxu_read8(priv, REG_SYS_FUNC);
+	val8 &= ~SYS_FUNC_BB_GLB_RSTN;
+	rtl8xxxu_write8(priv, REG_SYS_FUNC, val8);
+
+	/* Reset MAC TRX */
+	val16 = rtl8xxxu_read16(priv, REG_CR);
+	val16 |= 0x3f;
+	val16 &= ~(CR_MAC_TX_ENABLE | CR_MAC_RX_ENABLE | CR_SECURITY_ENABLE);
+	rtl8xxxu_write16(priv, REG_CR, val16);
+
+	/* Respond TxOK to scheduler */
+	val8 = rtl8xxxu_read8(priv, REG_DUAL_TSF_RST);
+	val8 |= DUAL_TSF_TX_OK;
+	rtl8xxxu_write8(priv, REG_DUAL_TSF_RST, val8);
+
+out:
+	return retval;
+}
+
+static int rtl8188fu_power_on(struct rtl8xxxu_priv *priv)
+{
+	u16 val16;
+	int ret;
+
+	rtl8188f_disabled_to_emu(priv);
+
+	ret = rtl8188f_emu_to_active(priv);
+	if (ret)
+		goto exit;
+
+	rtl8xxxu_write8(priv, REG_CR, 0);
+
+	val16 = rtl8xxxu_read16(priv, REG_CR);
+
+	val16 |= (CR_HCI_TXDMA_ENABLE | CR_HCI_RXDMA_ENABLE |
+		 CR_TXDMA_ENABLE | CR_RXDMA_ENABLE |
+		 CR_PROTOCOL_ENABLE | CR_SCHEDULE_ENABLE |
+		 CR_SECURITY_ENABLE | CR_CALTIMER_ENABLE);
+	rtl8xxxu_write16(priv, REG_CR, val16);
+
+exit:
+	return ret;
+}
+
+static void rtl8188fu_power_off(struct rtl8xxxu_priv *priv)
+{
+	u8 val8;
+	u16 val16;
+
+	rtl8xxxu_flush_fifo(priv);
+
+	val16 = rtl8xxxu_read16(priv, REG_GPIO_MUXCFG);
+	val16 &= ~BIT(12);
+	rtl8xxxu_write16(priv, REG_GPIO_MUXCFG, val16);
+
+	rtl8xxxu_write32(priv, REG_HISR0, 0xFFFFFFFF);
+	rtl8xxxu_write32(priv, REG_HISR1, 0xFFFFFFFF);
+
+	/* Stop Tx Report Timer. 0x4EC[Bit1]=b'0 */
+	val8 = rtl8xxxu_read8(priv, REG_TX_REPORT_CTRL);
+	val8 &= ~TX_REPORT_CTRL_TIMER_ENABLE;
+	rtl8xxxu_write8(priv, REG_TX_REPORT_CTRL, val8);
+
+	/* Turn off RF */
+	rtl8xxxu_write8(priv, REG_RF_CTRL, 0x00);
+
+	/* Reset Firmware if running in RAM */
+	if (rtl8xxxu_read8(priv, REG_MCU_FW_DL) & MCU_FW_RAM_SEL)
+		rtl8xxxu_firmware_self_reset(priv);
+
+	rtl8188fu_active_to_lps(priv);
+
+	/* Reset MCU */
+	val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC);
+	val16 &= ~SYS_FUNC_CPU_ENABLE;
+	rtl8xxxu_write16(priv, REG_SYS_FUNC, val16);
+
+	/* Reset MCU ready status */
+	rtl8xxxu_write8(priv, REG_MCU_FW_DL, 0x00);
+
+	rtl8188fu_active_to_emu(priv);
+	rtl8188fu_emu_to_disabled(priv);
+}
+
+#define PPG_BB_GAIN_2G_TXA_OFFSET_8188F 0xee
+#define PPG_BB_GAIN_2G_TX_OFFSET_MASK 0x0f
+
+static void rtl8188f_enable_rf(struct rtl8xxxu_priv *priv)
+{
+	u32 val32;
+	u8 pg_pwrtrim = 0xff, val8;
+	s8 bb_gain;
+
+	/* Somehow this is not found in the efuse we read earlier. */
+	rtl8xxxu_read_efuse8(priv, PPG_BB_GAIN_2G_TXA_OFFSET_8188F, &pg_pwrtrim);
+
+	if (pg_pwrtrim != 0xff) {
+		bb_gain = pg_pwrtrim & PPG_BB_GAIN_2G_TX_OFFSET_MASK;
+
+		if (bb_gain == PPG_BB_GAIN_2G_TX_OFFSET_MASK)
+			bb_gain = 0;
+		else if (bb_gain & 1)
+			bb_gain = bb_gain >> 1;
+		else
+			bb_gain = -(bb_gain >> 1);
+
+		val8 = abs(bb_gain);
+		if (bb_gain > 0)
+			val8 |= BIT(5);
+
+		val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_55);
+		val32 &= ~0xfc000;
+		val32 |= val8 << 14;
+		rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_55, val32);
+	}
+
+	rtl8xxxu_write8(priv, REG_RF_CTRL, RF_ENABLE | RF_RSTB | RF_SDMRSTB);
+
+	val32 = rtl8xxxu_read32(priv, REG_OFDM0_TRX_PATH_ENABLE);
+	val32 &= ~(OFDM_RF_PATH_RX_MASK | OFDM_RF_PATH_TX_MASK);
+	val32 |= OFDM_RF_PATH_RX_A | OFDM_RF_PATH_TX_A;
+	rtl8xxxu_write32(priv, REG_OFDM0_TRX_PATH_ENABLE, val32);
+
+	rtl8xxxu_write8(priv, REG_TXPAUSE, 0x00);
+}
+
+static void rtl8188f_disable_rf(struct rtl8xxxu_priv *priv)
+{
+	u32 val32;
+
+	val32 = rtl8xxxu_read32(priv, REG_OFDM0_TRX_PATH_ENABLE);
+	val32 &= ~OFDM_RF_PATH_TX_MASK;
+	rtl8xxxu_write32(priv, REG_OFDM0_TRX_PATH_ENABLE, val32);
+
+	/* Power down RF module */
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_AC, 0);
+}
+
+static void rtl8188f_usb_quirks(struct rtl8xxxu_priv *priv)
+{
+	u16 val16;
+	u32 val32;
+
+	val16 = rtl8xxxu_read16(priv, REG_CR);
+	val16 |= (CR_MAC_TX_ENABLE | CR_MAC_RX_ENABLE);
+	rtl8xxxu_write16(priv, REG_CR, val16);
+
+	val32 = rtl8xxxu_read32(priv, REG_TXDMA_OFFSET_CHK);
+	val32 |= TXDMA_OFFSET_DROP_DATA_EN;
+	rtl8xxxu_write32(priv, REG_TXDMA_OFFSET_CHK, val32);
+}
+
+#define XTAL1	GENMASK(22, 17)
+#define XTAL0	GENMASK(16, 11)
+
+void rtl8188f_set_crystal_cap(struct rtl8xxxu_priv *priv, u8 crystal_cap)
+{
+	struct rtl8xxxu_cfo_tracking *cfo = &priv->cfo_tracking;
+	u32 val32;
+
+	if (crystal_cap == cfo->crystal_cap)
+		return;
+
+	val32 = rtl8xxxu_read32(priv, REG_AFE_XTAL_CTRL);
+
+	dev_dbg(&priv->udev->dev,
+	        "%s: Adjusting crystal cap from 0x%x (actually 0x%lx 0x%lx) to 0x%x\n",
+	        __func__,
+	        cfo->crystal_cap,
+	        FIELD_GET(XTAL1, val32),
+	        FIELD_GET(XTAL0, val32),
+	        crystal_cap);
+
+	val32 &= ~(XTAL1 | XTAL0);
+	val32 |= FIELD_PREP(XTAL1, crystal_cap) |
+		 FIELD_PREP(XTAL0, crystal_cap);
+	rtl8xxxu_write32(priv, REG_AFE_XTAL_CTRL, val32);
+
+	cfo->crystal_cap = crystal_cap;
+}
+
+static s8 rtl8188f_cck_rssi(struct rtl8xxxu_priv *priv, struct rtl8723au_phy_stats *phy_stats)
+{
+	u8 cck_agc_rpt = phy_stats->cck_agc_rpt_ofdm_cfosho_a;
+	s8 rx_pwr_all = 0x00;
+	u8 vga_idx, lna_idx;
+
+	lna_idx = u8_get_bits(cck_agc_rpt, CCK_AGC_RPT_LNA_IDX_MASK);
+	vga_idx = u8_get_bits(cck_agc_rpt, CCK_AGC_RPT_VGA_IDX_MASK);
+
+	switch (lna_idx) {
+	case 7:
+		if (vga_idx <= 27)
+			rx_pwr_all = -100 + 2 * (27 - vga_idx);
+		else
+			rx_pwr_all = -100;
+		break;
+	case 5:
+		rx_pwr_all = -74 + 2 * (21 - vga_idx);
+		break;
+	case 3:
+		rx_pwr_all = -60 + 2 * (20 - vga_idx);
+		break;
+	case 1:
+		rx_pwr_all = -44 + 2 * (19 - vga_idx);
+		break;
+	default:
+		break;
+	}
+
+	return rx_pwr_all;
+}
+
+struct rtl8xxxu_fileops rtl8188fu_fops = {
+	.identify_chip = rtl8188fu_identify_chip,
+	.parse_efuse = rtl8188fu_parse_efuse,
+	.load_firmware = rtl8188fu_load_firmware,
+	.power_on = rtl8188fu_power_on,
+	.power_off = rtl8188fu_power_off,
+	.read_efuse = rtl8xxxu_read_efuse,
+	.reset_8051 = rtl8xxxu_reset_8051,
+	.llt_init = rtl8xxxu_auto_llt_table,
+	.init_phy_bb = rtl8188fu_init_phy_bb,
+	.init_phy_rf = rtl8188fu_init_phy_rf,
+	.phy_init_antenna_selection = rtl8723bu_phy_init_antenna_selection,
+	.phy_lc_calibrate = rtl8188f_phy_lc_calibrate,
+	.phy_iq_calibrate = rtl8188fu_phy_iq_calibrate,
+	.config_channel = rtl8188fu_config_channel,
+	.parse_rx_desc = rtl8xxxu_parse_rxdesc24,
+	.parse_phystats = rtl8723au_rx_parse_phystats,
+	.init_aggregation = rtl8188fu_init_aggregation,
+	.init_statistics = rtl8188fu_init_statistics,
+	.init_burst = rtl8xxxu_init_burst,
+	.enable_rf = rtl8188f_enable_rf,
+	.disable_rf = rtl8188f_disable_rf,
+	.usb_quirks = rtl8188f_usb_quirks,
+	.set_tx_power = rtl8188f_set_tx_power,
+	.update_rate_mask = rtl8xxxu_gen2_update_rate_mask,
+	.report_connect = rtl8xxxu_gen2_report_connect,
+	.report_rssi = rtl8xxxu_gen2_report_rssi,
+	.fill_txdesc = rtl8xxxu_fill_txdesc_v2,
+	.set_crystal_cap = rtl8188f_set_crystal_cap,
+	.cck_rssi = rtl8188f_cck_rssi,
+	.writeN_block_size = 128,
+	.rx_desc_size = sizeof(struct rtl8xxxu_rxdesc24),
+	.tx_desc_size = sizeof(struct rtl8xxxu_txdesc40),
+	.has_s0s1 = 1,
+	.has_tx_report = 1,
+	.gen2_thermal_meter = 1,
+	.needs_full_init = 1,
+	.init_reg_rxfltmap = 1,
+	.init_reg_pkt_life_time = 1,
+	.init_reg_hmtfr = 1,
+	.ampdu_max_time = 0x70,
+	.ustime_tsf_edca = 0x28,
+	.max_aggr_num = 0x0c14,
+	.supports_ap = 1,
+	.max_macid_num = 16,
+	.adda_1t_init = 0x03c00014,
+	.adda_1t_path_on = 0x03c00014,
+	.trxff_boundary = 0x3f7f,
+	.pbp_rx = PBP_PAGE_SIZE_256,
+	.pbp_tx = PBP_PAGE_SIZE_256,
+	.mactable = rtl8188f_mac_init_table,
+	.total_page_num = TX_TOTAL_PAGE_NUM_8188F,
+	.page_num_hi = TX_PAGE_NUM_HI_PQ_8188F,
+	.page_num_lo = TX_PAGE_NUM_LO_PQ_8188F,
+	.page_num_norm = TX_PAGE_NUM_NORM_PQ_8188F,
+};
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192c.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192c.c
new file mode 100644
index 0000000000..b30a9a513c
--- /dev/null
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192c.c
@@ -0,0 +1,629 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * RTL8XXXU mac80211 USB driver - 8188c/8188r/8192c specific subdriver
+ *
+ * Copyright (c) 2014 - 2017 Jes Sorensen <Jes.Sorensen@gmail.com>
+ *
+ * Portions, notably calibration code:
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This driver was written as a replacement for the vendor provided
+ * rtl8723au driver. As the Realtek 8xxx chips are very similar in
+ * their programming interface, I have started adding support for
+ * additional 8xxx chips like the 8192cu, 8188cus, etc.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <linux/usb.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/wireless.h>
+#include <linux/firmware.h>
+#include <linux/moduleparam.h>
+#include <net/mac80211.h>
+#include "rtl8xxxu.h"
+#include "rtl8xxxu_regs.h"
+
+#ifdef CONFIG_RTL8XXXU_UNTESTED
+static struct rtl8xxxu_power_base rtl8192c_power_base = {
+	.reg_0e00 = 0x07090c0c,
+	.reg_0e04 = 0x01020405,
+	.reg_0e08 = 0x00000000,
+	.reg_086c = 0x00000000,
+
+	.reg_0e10 = 0x0b0c0c0e,
+	.reg_0e14 = 0x01030506,
+	.reg_0e18 = 0x0b0c0d0e,
+	.reg_0e1c = 0x01030509,
+
+	.reg_0830 = 0x07090c0c,
+	.reg_0834 = 0x01020405,
+	.reg_0838 = 0x00000000,
+	.reg_086c_2 = 0x00000000,
+
+	.reg_083c = 0x0b0c0d0e,
+	.reg_0848 = 0x01030509,
+	.reg_084c = 0x0b0c0d0e,
+	.reg_0868 = 0x01030509,
+};
+
+static struct rtl8xxxu_power_base rtl8188r_power_base = {
+	.reg_0e00 = 0x06080808,
+	.reg_0e04 = 0x00040406,
+	.reg_0e08 = 0x00000000,
+	.reg_086c = 0x00000000,
+
+	.reg_0e10 = 0x04060608,
+	.reg_0e14 = 0x00020204,
+	.reg_0e18 = 0x04060608,
+	.reg_0e1c = 0x00020204,
+
+	.reg_0830 = 0x06080808,
+	.reg_0834 = 0x00040406,
+	.reg_0838 = 0x00000000,
+	.reg_086c_2 = 0x00000000,
+
+	.reg_083c = 0x04060608,
+	.reg_0848 = 0x00020204,
+	.reg_084c = 0x04060608,
+	.reg_0868 = 0x00020204,
+};
+
+static const struct rtl8xxxu_rfregval rtl8192cu_radioa_2t_init_table[] = {
+	{0x00, 0x00030159}, {0x01, 0x00031284},
+	{0x02, 0x00098000}, {0x03, 0x00018c63},
+	{0x04, 0x000210e7}, {0x09, 0x0002044f},
+	{0x0a, 0x0001adb1}, {0x0b, 0x00054867},
+	{0x0c, 0x0008992e}, {0x0d, 0x0000e52c},
+	{0x0e, 0x00039ce7}, {0x0f, 0x00000451},
+	{0x19, 0x00000000}, {0x1a, 0x00010255},
+	{0x1b, 0x00060a00}, {0x1c, 0x000fc378},
+	{0x1d, 0x000a1250}, {0x1e, 0x0004445f},
+	{0x1f, 0x00080001}, {0x20, 0x0000b614},
+	{0x21, 0x0006c000}, {0x22, 0x00000000},
+	{0x23, 0x00001558}, {0x24, 0x00000060},
+	{0x25, 0x00000483}, {0x26, 0x0004f000},
+	{0x27, 0x000ec7d9}, {0x28, 0x000577c0},
+	{0x29, 0x00004783}, {0x2a, 0x00000001},
+	{0x2b, 0x00021334}, {0x2a, 0x00000000},
+	{0x2b, 0x00000054}, {0x2a, 0x00000001},
+	{0x2b, 0x00000808}, {0x2b, 0x00053333},
+	{0x2c, 0x0000000c}, {0x2a, 0x00000002},
+	{0x2b, 0x00000808}, {0x2b, 0x0005b333},
+	{0x2c, 0x0000000d}, {0x2a, 0x00000003},
+	{0x2b, 0x00000808}, {0x2b, 0x00063333},
+	{0x2c, 0x0000000d}, {0x2a, 0x00000004},
+	{0x2b, 0x00000808}, {0x2b, 0x0006b333},
+	{0x2c, 0x0000000d}, {0x2a, 0x00000005},
+	{0x2b, 0x00000808}, {0x2b, 0x00073333},
+	{0x2c, 0x0000000d}, {0x2a, 0x00000006},
+	{0x2b, 0x00000709}, {0x2b, 0x0005b333},
+	{0x2c, 0x0000000d}, {0x2a, 0x00000007},
+	{0x2b, 0x00000709}, {0x2b, 0x00063333},
+	{0x2c, 0x0000000d}, {0x2a, 0x00000008},
+	{0x2b, 0x0000060a}, {0x2b, 0x0004b333},
+	{0x2c, 0x0000000d}, {0x2a, 0x00000009},
+	{0x2b, 0x0000060a}, {0x2b, 0x00053333},
+	{0x2c, 0x0000000d}, {0x2a, 0x0000000a},
+	{0x2b, 0x0000060a}, {0x2b, 0x0005b333},
+	{0x2c, 0x0000000d}, {0x2a, 0x0000000b},
+	{0x2b, 0x0000060a}, {0x2b, 0x00063333},
+	{0x2c, 0x0000000d}, {0x2a, 0x0000000c},
+	{0x2b, 0x0000060a}, {0x2b, 0x0006b333},
+	{0x2c, 0x0000000d}, {0x2a, 0x0000000d},
+	{0x2b, 0x0000060a}, {0x2b, 0x00073333},
+	{0x2c, 0x0000000d}, {0x2a, 0x0000000e},
+	{0x2b, 0x0000050b}, {0x2b, 0x00066666},
+	{0x2c, 0x0000001a}, {0x2a, 0x000e0000},
+	{0x10, 0x0004000f}, {0x11, 0x000e31fc},
+	{0x10, 0x0006000f}, {0x11, 0x000ff9f8},
+	{0x10, 0x0002000f}, {0x11, 0x000203f9},
+	{0x10, 0x0003000f}, {0x11, 0x000ff500},
+	{0x10, 0x00000000}, {0x11, 0x00000000},
+	{0x10, 0x0008000f}, {0x11, 0x0003f100},
+	{0x10, 0x0009000f}, {0x11, 0x00023100},
+	{0x12, 0x00032000}, {0x12, 0x00071000},
+	{0x12, 0x000b0000}, {0x12, 0x000fc000},
+	{0x13, 0x000287b3}, {0x13, 0x000244b7},
+	{0x13, 0x000204ab}, {0x13, 0x0001c49f},
+	{0x13, 0x00018493}, {0x13, 0x0001429b},
+	{0x13, 0x00010299}, {0x13, 0x0000c29c},
+	{0x13, 0x000081a0}, {0x13, 0x000040ac},
+	{0x13, 0x00000020}, {0x14, 0x0001944c},
+	{0x14, 0x00059444}, {0x14, 0x0009944c},
+	{0x14, 0x000d9444}, {0x15, 0x0000f424},
+	{0x15, 0x0004f424}, {0x15, 0x0008f424},
+	{0x15, 0x000cf424}, {0x16, 0x000e0330},
+	{0x16, 0x000a0330}, {0x16, 0x00060330},
+	{0x16, 0x00020330}, {0x00, 0x00010159},
+	{0x18, 0x0000f401}, {0xfe, 0x00000000},
+	{0xfe, 0x00000000}, {0x1f, 0x00080003},
+	{0xfe, 0x00000000}, {0xfe, 0x00000000},
+	{0x1e, 0x00044457}, {0x1f, 0x00080000},
+	{0x00, 0x00030159},
+	{0xff, 0xffffffff}
+};
+
+static const struct rtl8xxxu_rfregval rtl8192cu_radiob_2t_init_table[] = {
+	{0x00, 0x00030159}, {0x01, 0x00031284},
+	{0x02, 0x00098000}, {0x03, 0x00018c63},
+	{0x04, 0x000210e7}, {0x09, 0x0002044f},
+	{0x0a, 0x0001adb1}, {0x0b, 0x00054867},
+	{0x0c, 0x0008992e}, {0x0d, 0x0000e52c},
+	{0x0e, 0x00039ce7}, {0x0f, 0x00000451},
+	{0x12, 0x00032000}, {0x12, 0x00071000},
+	{0x12, 0x000b0000}, {0x12, 0x000fc000},
+	{0x13, 0x000287af}, {0x13, 0x000244b7},
+	{0x13, 0x000204ab}, {0x13, 0x0001c49f},
+	{0x13, 0x00018493}, {0x13, 0x00014297},
+	{0x13, 0x00010295}, {0x13, 0x0000c298},
+	{0x13, 0x0000819c}, {0x13, 0x000040a8},
+	{0x13, 0x0000001c}, {0x14, 0x0001944c},
+	{0x14, 0x00059444}, {0x14, 0x0009944c},
+	{0x14, 0x000d9444}, {0x15, 0x0000f424},
+	{0x15, 0x0004f424}, {0x15, 0x0008f424},
+	{0x15, 0x000cf424}, {0x16, 0x000e0330},
+	{0x16, 0x000a0330}, {0x16, 0x00060330},
+	{0x16, 0x00020330},
+	{0xff, 0xffffffff}
+};
+
+static const struct rtl8xxxu_rfregval rtl8192cu_radioa_1t_init_table[] = {
+	{0x00, 0x00030159}, {0x01, 0x00031284},
+	{0x02, 0x00098000}, {0x03, 0x00018c63},
+	{0x04, 0x000210e7}, {0x09, 0x0002044f},
+	{0x0a, 0x0001adb1}, {0x0b, 0x00054867},
+	{0x0c, 0x0008992e}, {0x0d, 0x0000e52c},
+	{0x0e, 0x00039ce7}, {0x0f, 0x00000451},
+	{0x19, 0x00000000}, {0x1a, 0x00010255},
+	{0x1b, 0x00060a00}, {0x1c, 0x000fc378},
+	{0x1d, 0x000a1250}, {0x1e, 0x0004445f},
+	{0x1f, 0x00080001}, {0x20, 0x0000b614},
+	{0x21, 0x0006c000}, {0x22, 0x00000000},
+	{0x23, 0x00001558}, {0x24, 0x00000060},
+	{0x25, 0x00000483}, {0x26, 0x0004f000},
+	{0x27, 0x000ec7d9}, {0x28, 0x000577c0},
+	{0x29, 0x00004783}, {0x2a, 0x00000001},
+	{0x2b, 0x00021334}, {0x2a, 0x00000000},
+	{0x2b, 0x00000054}, {0x2a, 0x00000001},
+	{0x2b, 0x00000808}, {0x2b, 0x00053333},
+	{0x2c, 0x0000000c}, {0x2a, 0x00000002},
+	{0x2b, 0x00000808}, {0x2b, 0x0005b333},
+	{0x2c, 0x0000000d}, {0x2a, 0x00000003},
+	{0x2b, 0x00000808}, {0x2b, 0x00063333},
+	{0x2c, 0x0000000d}, {0x2a, 0x00000004},
+	{0x2b, 0x00000808}, {0x2b, 0x0006b333},
+	{0x2c, 0x0000000d}, {0x2a, 0x00000005},
+	{0x2b, 0x00000808}, {0x2b, 0x00073333},
+	{0x2c, 0x0000000d}, {0x2a, 0x00000006},
+	{0x2b, 0x00000709}, {0x2b, 0x0005b333},
+	{0x2c, 0x0000000d}, {0x2a, 0x00000007},
+	{0x2b, 0x00000709}, {0x2b, 0x00063333},
+	{0x2c, 0x0000000d}, {0x2a, 0x00000008},
+	{0x2b, 0x0000060a}, {0x2b, 0x0004b333},
+	{0x2c, 0x0000000d}, {0x2a, 0x00000009},
+	{0x2b, 0x0000060a}, {0x2b, 0x00053333},
+	{0x2c, 0x0000000d}, {0x2a, 0x0000000a},
+	{0x2b, 0x0000060a}, {0x2b, 0x0005b333},
+	{0x2c, 0x0000000d}, {0x2a, 0x0000000b},
+	{0x2b, 0x0000060a}, {0x2b, 0x00063333},
+	{0x2c, 0x0000000d}, {0x2a, 0x0000000c},
+	{0x2b, 0x0000060a}, {0x2b, 0x0006b333},
+	{0x2c, 0x0000000d}, {0x2a, 0x0000000d},
+	{0x2b, 0x0000060a}, {0x2b, 0x00073333},
+	{0x2c, 0x0000000d}, {0x2a, 0x0000000e},
+	{0x2b, 0x0000050b}, {0x2b, 0x00066666},
+	{0x2c, 0x0000001a}, {0x2a, 0x000e0000},
+	{0x10, 0x0004000f}, {0x11, 0x000e31fc},
+	{0x10, 0x0006000f}, {0x11, 0x000ff9f8},
+	{0x10, 0x0002000f}, {0x11, 0x000203f9},
+	{0x10, 0x0003000f}, {0x11, 0x000ff500},
+	{0x10, 0x00000000}, {0x11, 0x00000000},
+	{0x10, 0x0008000f}, {0x11, 0x0003f100},
+	{0x10, 0x0009000f}, {0x11, 0x00023100},
+	{0x12, 0x00032000}, {0x12, 0x00071000},
+	{0x12, 0x000b0000}, {0x12, 0x000fc000},
+	{0x13, 0x000287b3}, {0x13, 0x000244b7},
+	{0x13, 0x000204ab}, {0x13, 0x0001c49f},
+	{0x13, 0x00018493}, {0x13, 0x0001429b},
+	{0x13, 0x00010299}, {0x13, 0x0000c29c},
+	{0x13, 0x000081a0}, {0x13, 0x000040ac},
+	{0x13, 0x00000020}, {0x14, 0x0001944c},
+	{0x14, 0x00059444}, {0x14, 0x0009944c},
+	{0x14, 0x000d9444}, {0x15, 0x0000f405},
+	{0x15, 0x0004f405}, {0x15, 0x0008f405},
+	{0x15, 0x000cf405}, {0x16, 0x000e0330},
+	{0x16, 0x000a0330}, {0x16, 0x00060330},
+	{0x16, 0x00020330}, {0x00, 0x00010159},
+	{0x18, 0x0000f401}, {0xfe, 0x00000000},
+	{0xfe, 0x00000000}, {0x1f, 0x00080003},
+	{0xfe, 0x00000000}, {0xfe, 0x00000000},
+	{0x1e, 0x00044457}, {0x1f, 0x00080000},
+	{0x00, 0x00030159},
+	{0xff, 0xffffffff}
+};
+
+static const struct rtl8xxxu_rfregval rtl8188ru_radioa_1t_highpa_table[] = {
+	{0x00, 0x00030159}, {0x01, 0x00031284},
+	{0x02, 0x00098000}, {0x03, 0x00018c63},
+	{0x04, 0x000210e7}, {0x09, 0x0002044f},
+	{0x0a, 0x0001adb0}, {0x0b, 0x00054867},
+	{0x0c, 0x0008992e}, {0x0d, 0x0000e529},
+	{0x0e, 0x00039ce7}, {0x0f, 0x00000451},
+	{0x19, 0x00000000}, {0x1a, 0x00000255},
+	{0x1b, 0x00060a00}, {0x1c, 0x000fc378},
+	{0x1d, 0x000a1250}, {0x1e, 0x0004445f},
+	{0x1f, 0x00080001}, {0x20, 0x0000b614},
+	{0x21, 0x0006c000}, {0x22, 0x0000083c},
+	{0x23, 0x00001558}, {0x24, 0x00000060},
+	{0x25, 0x00000483}, {0x26, 0x0004f000},
+	{0x27, 0x000ec7d9}, {0x28, 0x000977c0},
+	{0x29, 0x00004783}, {0x2a, 0x00000001},
+	{0x2b, 0x00021334}, {0x2a, 0x00000000},
+	{0x2b, 0x00000054}, {0x2a, 0x00000001},
+	{0x2b, 0x00000808}, {0x2b, 0x00053333},
+	{0x2c, 0x0000000c}, {0x2a, 0x00000002},
+	{0x2b, 0x00000808}, {0x2b, 0x0005b333},
+	{0x2c, 0x0000000d}, {0x2a, 0x00000003},
+	{0x2b, 0x00000808}, {0x2b, 0x00063333},
+	{0x2c, 0x0000000d}, {0x2a, 0x00000004},
+	{0x2b, 0x00000808}, {0x2b, 0x0006b333},
+	{0x2c, 0x0000000d}, {0x2a, 0x00000005},
+	{0x2b, 0x00000808}, {0x2b, 0x00073333},
+	{0x2c, 0x0000000d}, {0x2a, 0x00000006},
+	{0x2b, 0x00000709}, {0x2b, 0x0005b333},
+	{0x2c, 0x0000000d}, {0x2a, 0x00000007},
+	{0x2b, 0x00000709}, {0x2b, 0x00063333},
+	{0x2c, 0x0000000d}, {0x2a, 0x00000008},
+	{0x2b, 0x0000060a}, {0x2b, 0x0004b333},
+	{0x2c, 0x0000000d}, {0x2a, 0x00000009},
+	{0x2b, 0x0000060a}, {0x2b, 0x00053333},
+	{0x2c, 0x0000000d}, {0x2a, 0x0000000a},
+	{0x2b, 0x0000060a}, {0x2b, 0x0005b333},
+	{0x2c, 0x0000000d}, {0x2a, 0x0000000b},
+	{0x2b, 0x0000060a}, {0x2b, 0x00063333},
+	{0x2c, 0x0000000d}, {0x2a, 0x0000000c},
+	{0x2b, 0x0000060a}, {0x2b, 0x0006b333},
+	{0x2c, 0x0000000d}, {0x2a, 0x0000000d},
+	{0x2b, 0x0000060a}, {0x2b, 0x00073333},
+	{0x2c, 0x0000000d}, {0x2a, 0x0000000e},
+	{0x2b, 0x0000050b}, {0x2b, 0x00066666},
+	{0x2c, 0x0000001a}, {0x2a, 0x000e0000},
+	{0x10, 0x0004000f}, {0x11, 0x000e31fc},
+	{0x10, 0x0006000f}, {0x11, 0x000ff9f8},
+	{0x10, 0x0002000f}, {0x11, 0x000203f9},
+	{0x10, 0x0003000f}, {0x11, 0x000ff500},
+	{0x10, 0x00000000}, {0x11, 0x00000000},
+	{0x10, 0x0008000f}, {0x11, 0x0003f100},
+	{0x10, 0x0009000f}, {0x11, 0x00023100},
+	{0x12, 0x000d8000}, {0x12, 0x00090000},
+	{0x12, 0x00051000}, {0x12, 0x00012000},
+	{0x13, 0x00028fb4}, {0x13, 0x00024fa8},
+	{0x13, 0x000207a4}, {0x13, 0x0001c3b0},
+	{0x13, 0x000183a4}, {0x13, 0x00014398},
+	{0x13, 0x000101a4}, {0x13, 0x0000c198},
+	{0x13, 0x000080a4}, {0x13, 0x00004098},
+	{0x13, 0x00000000}, {0x14, 0x0001944c},
+	{0x14, 0x00059444}, {0x14, 0x0009944c},
+	{0x14, 0x000d9444}, {0x15, 0x0000f405},
+	{0x15, 0x0004f405}, {0x15, 0x0008f405},
+	{0x15, 0x000cf405}, {0x16, 0x000e0330},
+	{0x16, 0x000a0330}, {0x16, 0x00060330},
+	{0x16, 0x00020330}, {0x00, 0x00010159},
+	{0x18, 0x0000f401}, {0xfe, 0x00000000},
+	{0xfe, 0x00000000}, {0x1f, 0x00080003},
+	{0xfe, 0x00000000}, {0xfe, 0x00000000},
+	{0x1e, 0x00044457}, {0x1f, 0x00080000},
+	{0x00, 0x00030159},
+	{0xff, 0xffffffff}
+};
+
+static int rtl8192cu_identify_chip(struct rtl8xxxu_priv *priv)
+{
+	struct device *dev = &priv->udev->dev;
+	u32 val32, bonding, sys_cfg, vendor;
+	int ret = 0;
+
+	sys_cfg = rtl8xxxu_read32(priv, REG_SYS_CFG);
+	priv->chip_cut = u32_get_bits(sys_cfg, SYS_CFG_CHIP_VERSION_MASK);
+	if (sys_cfg & SYS_CFG_TRP_VAUX_EN) {
+		dev_info(dev, "Unsupported test chip\n");
+		ret = -ENOTSUPP;
+		goto out;
+	}
+
+	if (sys_cfg & SYS_CFG_TYPE_ID) {
+		bonding = rtl8xxxu_read32(priv, REG_HPON_FSM);
+		bonding &= HPON_FSM_BONDING_MASK;
+		if (bonding == HPON_FSM_BONDING_1T2R) {
+			strscpy(priv->chip_name, "8191CU", sizeof(priv->chip_name));
+			priv->tx_paths = 1;
+			priv->usb_interrupts = 1;
+			priv->rtl_chip = RTL8191C;
+		} else {
+			strscpy(priv->chip_name, "8192CU", sizeof(priv->chip_name));
+			priv->tx_paths = 2;
+			priv->usb_interrupts = 0;
+			priv->rtl_chip = RTL8192C;
+		}
+		priv->rf_paths = 2;
+		priv->rx_paths = 2;
+	} else {
+		strscpy(priv->chip_name, "8188CU", sizeof(priv->chip_name));
+		priv->rf_paths = 1;
+		priv->rx_paths = 1;
+		priv->tx_paths = 1;
+		priv->rtl_chip = RTL8188C;
+		priv->usb_interrupts = 0;
+	}
+	priv->has_wifi = 1;
+
+	vendor = sys_cfg & SYS_CFG_VENDOR_ID;
+	rtl8xxxu_identify_vendor_1bit(priv, vendor);
+
+	val32 = rtl8xxxu_read32(priv, REG_GPIO_OUTSTS);
+	priv->rom_rev = u32_get_bits(val32, GPIO_RF_RL_ID);
+
+	rtl8xxxu_config_endpoints_sie(priv);
+
+	/*
+	 * Fallback for devices that do not provide REG_NORMAL_SIE_EP_TX
+	 */
+	if (!priv->ep_tx_count)
+		ret = rtl8xxxu_config_endpoints_no_sie(priv);
+
+out:
+	return ret;
+}
+
+static int rtl8192cu_load_firmware(struct rtl8xxxu_priv *priv)
+{
+	const char *fw_name;
+	int ret;
+
+	if (!priv->vendor_umc)
+		fw_name = "rtlwifi/rtl8192cufw_TMSC.bin";
+	else if (priv->chip_cut || priv->rtl_chip == RTL8192C)
+		fw_name = "rtlwifi/rtl8192cufw_B.bin";
+	else
+		fw_name = "rtlwifi/rtl8192cufw_A.bin";
+
+	ret = rtl8xxxu_load_firmware(priv, fw_name);
+
+	return ret;
+}
+
+static int rtl8192cu_parse_efuse(struct rtl8xxxu_priv *priv)
+{
+	struct rtl8192cu_efuse *efuse = &priv->efuse_wifi.efuse8192;
+
+	if (efuse->rtl_id != cpu_to_le16(0x8129))
+		return -EINVAL;
+
+	ether_addr_copy(priv->mac_addr, efuse->mac_addr);
+
+	memcpy(priv->cck_tx_power_index_A,
+	       efuse->cck_tx_power_index_A,
+	       sizeof(efuse->cck_tx_power_index_A));
+	memcpy(priv->cck_tx_power_index_B,
+	       efuse->cck_tx_power_index_B,
+	       sizeof(efuse->cck_tx_power_index_B));
+
+	memcpy(priv->ht40_1s_tx_power_index_A,
+	       efuse->ht40_1s_tx_power_index_A,
+	       sizeof(efuse->ht40_1s_tx_power_index_A));
+	memcpy(priv->ht40_1s_tx_power_index_B,
+	       efuse->ht40_1s_tx_power_index_B,
+	       sizeof(efuse->ht40_1s_tx_power_index_B));
+	memcpy(priv->ht40_2s_tx_power_index_diff,
+	       efuse->ht40_2s_tx_power_index_diff,
+	       sizeof(efuse->ht40_2s_tx_power_index_diff));
+
+	memcpy(priv->ht20_tx_power_index_diff,
+	       efuse->ht20_tx_power_index_diff,
+	       sizeof(efuse->ht20_tx_power_index_diff));
+	memcpy(priv->ofdm_tx_power_index_diff,
+	       efuse->ofdm_tx_power_index_diff,
+	       sizeof(efuse->ofdm_tx_power_index_diff));
+
+	memcpy(priv->ht40_max_power_offset,
+	       efuse->ht40_max_power_offset,
+	       sizeof(efuse->ht40_max_power_offset));
+	memcpy(priv->ht20_max_power_offset,
+	       efuse->ht20_max_power_offset,
+	       sizeof(efuse->ht20_max_power_offset));
+
+	priv->power_base = &rtl8192c_power_base;
+
+	if (efuse->rf_regulatory & 0x20) {
+		strscpy(priv->chip_name, "8188RU", sizeof(priv->chip_name));
+		priv->rtl_chip = RTL8188R;
+		priv->hi_pa = 1;
+		priv->no_pape = 1;
+		priv->power_base = &rtl8188r_power_base;
+	}
+
+	return 0;
+}
+
+static int rtl8192cu_init_phy_rf(struct rtl8xxxu_priv *priv)
+{
+	const struct rtl8xxxu_rfregval *rftable;
+	int ret;
+
+	if (priv->rtl_chip == RTL8188R) {
+		rftable = rtl8188ru_radioa_1t_highpa_table;
+		ret = rtl8xxxu_init_phy_rf(priv, rftable, RF_A);
+	} else if (priv->rf_paths == 1) {
+		rftable = rtl8192cu_radioa_1t_init_table;
+		ret = rtl8xxxu_init_phy_rf(priv, rftable, RF_A);
+	} else {
+		rftable = rtl8192cu_radioa_2t_init_table;
+		ret = rtl8xxxu_init_phy_rf(priv, rftable, RF_A);
+		if (ret)
+			goto exit;
+		rftable = rtl8192cu_radiob_2t_init_table;
+		ret = rtl8xxxu_init_phy_rf(priv, rftable, RF_B);
+	}
+
+exit:
+	return ret;
+}
+
+static int rtl8192cu_power_on(struct rtl8xxxu_priv *priv)
+{
+	u8 val8;
+	u16 val16;
+	u32 val32;
+	int i;
+
+	for (i = 100; i; i--) {
+		val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO);
+		if (val8 & APS_FSMCO_PFM_ALDN)
+			break;
+	}
+
+	if (!i) {
+		pr_info("%s: Poll failed\n", __func__);
+		return -ENODEV;
+	}
+
+	/*
+	 * RSV_CTRL 0x001C[7:0] = 0x00, unlock ISO/CLK/Power control register
+	 */
+	rtl8xxxu_write8(priv, REG_RSV_CTRL, 0x0);
+	rtl8xxxu_write8(priv, REG_SPS0_CTRL, 0x2b);
+	udelay(100);
+
+	val8 = rtl8xxxu_read8(priv, REG_LDOV12D_CTRL);
+	if (!(val8 & LDOV12D_ENABLE)) {
+		pr_info("%s: Enabling LDOV12D (%02x)\n", __func__, val8);
+		val8 |= LDOV12D_ENABLE;
+		rtl8xxxu_write8(priv, REG_LDOV12D_CTRL, val8);
+
+		udelay(100);
+
+		val8 = rtl8xxxu_read8(priv, REG_SYS_ISO_CTRL);
+		val8 &= ~SYS_ISO_MD2PP;
+		rtl8xxxu_write8(priv, REG_SYS_ISO_CTRL, val8);
+	}
+
+	/*
+	 * Auto enable WLAN
+	 */
+	val16 = rtl8xxxu_read16(priv, REG_APS_FSMCO);
+	val16 |= APS_FSMCO_MAC_ENABLE;
+	rtl8xxxu_write16(priv, REG_APS_FSMCO, val16);
+
+	for (i = 1000; i; i--) {
+		val16 = rtl8xxxu_read16(priv, REG_APS_FSMCO);
+		if (!(val16 & APS_FSMCO_MAC_ENABLE))
+			break;
+	}
+	if (!i) {
+		pr_info("%s: FSMCO_MAC_ENABLE poll failed\n", __func__);
+		return -EBUSY;
+	}
+
+	/*
+	 * Enable radio, GPIO, LED
+	 */
+	val16 = APS_FSMCO_HW_SUSPEND | APS_FSMCO_ENABLE_POWERDOWN |
+		APS_FSMCO_PFM_ALDN;
+	rtl8xxxu_write16(priv, REG_APS_FSMCO, val16);
+
+	/*
+	 * Release RF digital isolation
+	 */
+	val16 = rtl8xxxu_read16(priv, REG_SYS_ISO_CTRL);
+	val16 &= ~SYS_ISO_DIOR;
+	rtl8xxxu_write16(priv, REG_SYS_ISO_CTRL, val16);
+
+	val8 = rtl8xxxu_read8(priv, REG_APSD_CTRL);
+	val8 &= ~APSD_CTRL_OFF;
+	rtl8xxxu_write8(priv, REG_APSD_CTRL, val8);
+	for (i = 200; i; i--) {
+		val8 = rtl8xxxu_read8(priv, REG_APSD_CTRL);
+		if (!(val8 & APSD_CTRL_OFF_STATUS))
+			break;
+	}
+
+	if (!i) {
+		pr_info("%s: APSD_CTRL poll failed\n", __func__);
+		return -EBUSY;
+	}
+
+	/*
+	 * Enable MAC DMA/WMAC/SCHEDULE/SEC block
+	 */
+	val16 = rtl8xxxu_read16(priv, REG_CR);
+	val16 |= CR_HCI_TXDMA_ENABLE | CR_HCI_RXDMA_ENABLE |
+		CR_TXDMA_ENABLE | CR_RXDMA_ENABLE | CR_PROTOCOL_ENABLE |
+		CR_SCHEDULE_ENABLE | CR_MAC_TX_ENABLE | CR_MAC_RX_ENABLE;
+	rtl8xxxu_write16(priv, REG_CR, val16);
+
+	rtl8xxxu_write8(priv, 0xfe10, 0x19);
+
+	/*
+	 * Workaround for 8188RU LNA power leakage problem.
+	 */
+	if (priv->rtl_chip == RTL8188R) {
+		val32 = rtl8xxxu_read32(priv, REG_FPGA0_XCD_RF_PARM);
+		val32 &= ~BIT(1);
+		rtl8xxxu_write32(priv, REG_FPGA0_XCD_RF_PARM, val32);
+	}
+	return 0;
+}
+
+struct rtl8xxxu_fileops rtl8192cu_fops = {
+	.identify_chip = rtl8192cu_identify_chip,
+	.parse_efuse = rtl8192cu_parse_efuse,
+	.load_firmware = rtl8192cu_load_firmware,
+	.power_on = rtl8192cu_power_on,
+	.power_off = rtl8xxxu_power_off,
+	.read_efuse = rtl8xxxu_read_efuse,
+	.reset_8051 = rtl8xxxu_reset_8051,
+	.llt_init = rtl8xxxu_init_llt_table,
+	.init_phy_bb = rtl8xxxu_gen1_init_phy_bb,
+	.init_phy_rf = rtl8192cu_init_phy_rf,
+	.phy_lc_calibrate = rtl8723a_phy_lc_calibrate,
+	.phy_iq_calibrate = rtl8xxxu_gen1_phy_iq_calibrate,
+	.config_channel = rtl8xxxu_gen1_config_channel,
+	.parse_rx_desc = rtl8xxxu_parse_rxdesc16,
+	.parse_phystats = rtl8723au_rx_parse_phystats,
+	.init_aggregation = rtl8xxxu_gen1_init_aggregation,
+	.enable_rf = rtl8xxxu_gen1_enable_rf,
+	.disable_rf = rtl8xxxu_gen1_disable_rf,
+	.usb_quirks = rtl8xxxu_gen1_usb_quirks,
+	.set_tx_power = rtl8xxxu_gen1_set_tx_power,
+	.update_rate_mask = rtl8xxxu_update_rate_mask,
+	.report_connect = rtl8xxxu_gen1_report_connect,
+	.report_rssi = rtl8xxxu_gen1_report_rssi,
+	.fill_txdesc = rtl8xxxu_fill_txdesc_v1,
+	.cck_rssi = rtl8723a_cck_rssi,
+	.writeN_block_size = 128,
+	.rx_agg_buf_size = 16000,
+	.tx_desc_size = sizeof(struct rtl8xxxu_txdesc32),
+	.rx_desc_size = sizeof(struct rtl8xxxu_rxdesc16),
+	.adda_1t_init = 0x0b1b25a0,
+	.adda_1t_path_on = 0x0bdb25a0,
+	.adda_2t_path_on_a = 0x04db25a4,
+	.adda_2t_path_on_b = 0x0b1b25a4,
+	.trxff_boundary = 0x27ff,
+	.pbp_rx = PBP_PAGE_SIZE_128,
+	.pbp_tx = PBP_PAGE_SIZE_128,
+	.mactable = rtl8xxxu_gen1_mac_init_table,
+	.total_page_num = TX_TOTAL_PAGE_NUM,
+	.page_num_hi = TX_PAGE_NUM_HI_PQ,
+	.page_num_lo = TX_PAGE_NUM_LO_PQ,
+	.page_num_norm = TX_PAGE_NUM_NORM_PQ,
+};
+#endif
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c
new file mode 100644
index 0000000000..47bcaec6f2
--- /dev/null
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c
@@ -0,0 +1,1782 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * RTL8XXXU mac80211 USB driver - 8192e specific subdriver
+ *
+ * Copyright (c) 2014 - 2017 Jes Sorensen <Jes.Sorensen@gmail.com>
+ *
+ * Portions, notably calibration code:
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This driver was written as a replacement for the vendor provided
+ * rtl8723au driver. As the Realtek 8xxx chips are very similar in
+ * their programming interface, I have started adding support for
+ * additional 8xxx chips like the 8192cu, 8188cus, etc.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <linux/usb.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/wireless.h>
+#include <linux/firmware.h>
+#include <linux/moduleparam.h>
+#include <net/mac80211.h>
+#include "rtl8xxxu.h"
+#include "rtl8xxxu_regs.h"
+
+static const struct rtl8xxxu_reg8val rtl8192e_mac_init_table[] = {
+	{0x011, 0xeb}, {0x012, 0x07}, {0x014, 0x75}, {0x303, 0xa7},
+	{0x428, 0x0a}, {0x429, 0x10}, {0x430, 0x00}, {0x431, 0x00},
+	{0x432, 0x00}, {0x433, 0x01}, {0x434, 0x04}, {0x435, 0x05},
+	{0x436, 0x07}, {0x437, 0x08}, {0x43c, 0x04}, {0x43d, 0x05},
+	{0x43e, 0x07}, {0x43f, 0x08}, {0x440, 0x5d}, {0x441, 0x01},
+	{0x442, 0x00}, {0x444, 0x10}, {0x445, 0x00}, {0x446, 0x00},
+	{0x447, 0x00}, {0x448, 0x00}, {0x449, 0xf0}, {0x44a, 0x0f},
+	{0x44b, 0x3e}, {0x44c, 0x10}, {0x44d, 0x00}, {0x44e, 0x00},
+	{0x44f, 0x00}, {0x450, 0x00}, {0x451, 0xf0}, {0x452, 0x0f},
+	{0x453, 0x00}, {0x456, 0x5e}, {0x460, 0x66}, {0x461, 0x66},
+	{0x4c8, 0xff}, {0x4c9, 0x08}, {0x4cc, 0xff}, {0x4cd, 0xff},
+	{0x4ce, 0x01}, {0x500, 0x26}, {0x501, 0xa2}, {0x502, 0x2f},
+	{0x503, 0x00}, {0x504, 0x28}, {0x505, 0xa3}, {0x506, 0x5e},
+	{0x507, 0x00}, {0x508, 0x2b}, {0x509, 0xa4}, {0x50a, 0x5e},
+	{0x50b, 0x00}, {0x50c, 0x4f}, {0x50d, 0xa4}, {0x50e, 0x00},
+	{0x50f, 0x00}, {0x512, 0x1c}, {0x514, 0x0a}, {0x516, 0x0a},
+	{0x525, 0x4f}, {0x540, 0x12}, {0x541, 0x64}, {0x550, 0x10},
+	{0x551, 0x10}, {0x559, 0x02}, {0x55c, 0x50}, {0x55d, 0xff},
+	{0x605, 0x30}, {0x608, 0x0e}, {0x609, 0x2a}, {0x620, 0xff},
+	{0x621, 0xff}, {0x622, 0xff}, {0x623, 0xff}, {0x624, 0xff},
+	{0x625, 0xff}, {0x626, 0xff}, {0x627, 0xff}, {0x638, 0x50},
+	{0x63c, 0x0a}, {0x63d, 0x0a}, {0x63e, 0x0e}, {0x63f, 0x0e},
+	{0x640, 0x40}, {0x642, 0x40}, {0x643, 0x00}, {0x652, 0xc8},
+	{0x66e, 0x05}, {0x700, 0x21}, {0x701, 0x43}, {0x702, 0x65},
+	{0x703, 0x87}, {0x708, 0x21}, {0x709, 0x43}, {0x70a, 0x65},
+	{0x70b, 0x87},
+	{0xffff, 0xff},
+};
+
+static const struct rtl8xxxu_reg32val rtl8192eu_phy_init_table[] = {
+	{0x800, 0x80040000}, {0x804, 0x00000003},
+	{0x808, 0x0000fc00}, {0x80c, 0x0000000a},
+	{0x810, 0x10001331}, {0x814, 0x020c3d10},
+	{0x818, 0x02220385}, {0x81c, 0x00000000},
+	{0x820, 0x01000100}, {0x824, 0x00390204},
+	{0x828, 0x01000100}, {0x82c, 0x00390204},
+	{0x830, 0x32323232}, {0x834, 0x30303030},
+	{0x838, 0x30303030}, {0x83c, 0x30303030},
+	{0x840, 0x00010000}, {0x844, 0x00010000},
+	{0x848, 0x28282828}, {0x84c, 0x28282828},
+	{0x850, 0x00000000}, {0x854, 0x00000000},
+	{0x858, 0x009a009a}, {0x85c, 0x01000014},
+	{0x860, 0x66f60000}, {0x864, 0x061f0000},
+	{0x868, 0x30303030}, {0x86c, 0x30303030},
+	{0x870, 0x00000000}, {0x874, 0x55004200},
+	{0x878, 0x08080808}, {0x87c, 0x00000000},
+	{0x880, 0xb0000c1c}, {0x884, 0x00000001},
+	{0x888, 0x00000000}, {0x88c, 0xcc0000c0},
+	{0x890, 0x00000800}, {0x894, 0xfffffffe},
+	{0x898, 0x40302010}, {0x900, 0x00000000},
+	{0x904, 0x00000023}, {0x908, 0x00000000},
+	{0x90c, 0x81121313}, {0x910, 0x806c0001},
+	{0x914, 0x00000001}, {0x918, 0x00000000},
+	{0x91c, 0x00010000}, {0x924, 0x00000001},
+	{0x928, 0x00000000}, {0x92c, 0x00000000},
+	{0x930, 0x00000000}, {0x934, 0x00000000},
+	{0x938, 0x00000000}, {0x93c, 0x00000000},
+	{0x940, 0x00000000}, {0x944, 0x00000000},
+	{0x94c, 0x00000008}, {0xa00, 0x00d0c7c8},
+	{0xa04, 0x81ff000c}, {0xa08, 0x8c838300},
+	{0xa0c, 0x2e68120f}, {0xa10, 0x95009b78},
+	{0xa14, 0x1114d028}, {0xa18, 0x00881117},
+	{0xa1c, 0x89140f00}, {0xa20, 0x1a1b0000},
+	{0xa24, 0x090e1317}, {0xa28, 0x00000204},
+	{0xa2c, 0x00d30000}, {0xa70, 0x101fff00},
+	{0xa74, 0x00000007}, {0xa78, 0x00000900},
+	{0xa7c, 0x225b0606}, {0xa80, 0x218075b1},
+	{0xb38, 0x00000000}, {0xc00, 0x48071d40},
+	{0xc04, 0x03a05633}, {0xc08, 0x000000e4},
+	{0xc0c, 0x6c6c6c6c}, {0xc10, 0x08800000},
+	{0xc14, 0x40000100}, {0xc18, 0x08800000},
+	{0xc1c, 0x40000100}, {0xc20, 0x00000000},
+	{0xc24, 0x00000000}, {0xc28, 0x00000000},
+	{0xc2c, 0x00000000}, {0xc30, 0x69e9ac47},
+	{0xc34, 0x469652af}, {0xc38, 0x49795994},
+	{0xc3c, 0x0a97971c}, {0xc40, 0x1f7c403f},
+	{0xc44, 0x000100b7}, {0xc48, 0xec020107},
+	{0xc4c, 0x007f037f},
+#ifdef EXT_PA_8192EU
+	/* External PA or external LNA */
+	{0xc50, 0x00340220},
+#else
+	{0xc50, 0x00340020},
+#endif
+	{0xc54, 0x0080801f},
+#ifdef EXT_PA_8192EU
+	/* External PA or external LNA */
+	{0xc58, 0x00000220},
+#else
+	{0xc58, 0x00000020},
+#endif
+	{0xc5c, 0x00248492}, {0xc60, 0x00000000},
+	{0xc64, 0x7112848b}, {0xc68, 0x47c00bff},
+	{0xc6c, 0x00000036}, {0xc70, 0x00000600},
+	{0xc74, 0x02013169}, {0xc78, 0x0000001f},
+	{0xc7c, 0x00b91612},
+#ifdef EXT_PA_8192EU
+	/* External PA or external LNA */
+	{0xc80, 0x2d4000b5},
+#else
+	{0xc80, 0x40000100},
+#endif
+	{0xc84, 0x21f60000},
+#ifdef EXT_PA_8192EU
+	/* External PA or external LNA */
+	{0xc88, 0x2d4000b5},
+#else
+	{0xc88, 0x40000100},
+#endif
+	{0xc8c, 0xa0e40000}, {0xc90, 0x00121820},
+	{0xc94, 0x00000000}, {0xc98, 0x00121820},
+	{0xc9c, 0x00007f7f}, {0xca0, 0x00000000},
+	{0xca4, 0x000300a0}, {0xca8, 0x00000000},
+	{0xcac, 0x00000000}, {0xcb0, 0x00000000},
+	{0xcb4, 0x00000000}, {0xcb8, 0x00000000},
+	{0xcbc, 0x28000000}, {0xcc0, 0x00000000},
+	{0xcc4, 0x00000000}, {0xcc8, 0x00000000},
+	{0xccc, 0x00000000}, {0xcd0, 0x00000000},
+	{0xcd4, 0x00000000}, {0xcd8, 0x64b22427},
+	{0xcdc, 0x00766932}, {0xce0, 0x00222222},
+	{0xce4, 0x00040000}, {0xce8, 0x77644302},
+	{0xcec, 0x2f97d40c}, {0xd00, 0x00080740},
+	{0xd04, 0x00020403}, {0xd08, 0x0000907f},
+	{0xd0c, 0x20010201}, {0xd10, 0xa0633333},
+	{0xd14, 0x3333bc43}, {0xd18, 0x7a8f5b6b},
+	{0xd1c, 0x0000007f}, {0xd2c, 0xcc979975},
+	{0xd30, 0x00000000}, {0xd34, 0x80608000},
+	{0xd38, 0x00000000}, {0xd3c, 0x00127353},
+	{0xd40, 0x00000000}, {0xd44, 0x00000000},
+	{0xd48, 0x00000000}, {0xd4c, 0x00000000},
+	{0xd50, 0x6437140a}, {0xd54, 0x00000000},
+	{0xd58, 0x00000282}, {0xd5c, 0x30032064},
+	{0xd60, 0x4653de68}, {0xd64, 0x04518a3c},
+	{0xd68, 0x00002101}, {0xd6c, 0x2a201c16},
+	{0xd70, 0x1812362e}, {0xd74, 0x322c2220},
+	{0xd78, 0x000e3c24}, {0xd80, 0x01081008},
+	{0xd84, 0x00000800}, {0xd88, 0xf0b50000},
+	{0xe00, 0x30303030}, {0xe04, 0x30303030},
+	{0xe08, 0x03903030}, {0xe10, 0x30303030},
+	{0xe14, 0x30303030}, {0xe18, 0x30303030},
+	{0xe1c, 0x30303030}, {0xe28, 0x00000000},
+	{0xe30, 0x1000dc1f}, {0xe34, 0x10008c1f},
+	{0xe38, 0x02140102}, {0xe3c, 0x681604c2},
+	{0xe40, 0x01007c00}, {0xe44, 0x01004800},
+	{0xe48, 0xfb000000}, {0xe4c, 0x000028d1},
+	{0xe50, 0x1000dc1f}, {0xe54, 0x10008c1f},
+	{0xe58, 0x02140102}, {0xe5c, 0x28160d05},
+	{0xe60, 0x00000008}, {0xe68, 0x0fc05656},
+	{0xe6c, 0x03c09696}, {0xe70, 0x03c09696},
+	{0xe74, 0x0c005656}, {0xe78, 0x0c005656},
+	{0xe7c, 0x0c005656}, {0xe80, 0x0c005656},
+	{0xe84, 0x03c09696}, {0xe88, 0x0c005656},
+	{0xe8c, 0x03c09696}, {0xed0, 0x03c09696},
+	{0xed4, 0x03c09696}, {0xed8, 0x03c09696},
+	{0xedc, 0x0000d6d6}, {0xee0, 0x0000d6d6},
+	{0xeec, 0x0fc01616}, {0xee4, 0xb0000c1c},
+	{0xee8, 0x00000001}, {0xf14, 0x00000003},
+	{0xf4c, 0x00000000}, {0xf00, 0x00000300},
+	{0xffff, 0xffffffff},
+};
+
+static const struct rtl8xxxu_reg32val rtl8xxx_agc_8192eu_std_table[] = {
+	{0xc78, 0xfb000001}, {0xc78, 0xfb010001},
+	{0xc78, 0xfb020001}, {0xc78, 0xfb030001},
+	{0xc78, 0xfb040001}, {0xc78, 0xfb050001},
+	{0xc78, 0xfa060001}, {0xc78, 0xf9070001},
+	{0xc78, 0xf8080001}, {0xc78, 0xf7090001},
+	{0xc78, 0xf60a0001}, {0xc78, 0xf50b0001},
+	{0xc78, 0xf40c0001}, {0xc78, 0xf30d0001},
+	{0xc78, 0xf20e0001}, {0xc78, 0xf10f0001},
+	{0xc78, 0xf0100001}, {0xc78, 0xef110001},
+	{0xc78, 0xee120001}, {0xc78, 0xed130001},
+	{0xc78, 0xec140001}, {0xc78, 0xeb150001},
+	{0xc78, 0xea160001}, {0xc78, 0xe9170001},
+	{0xc78, 0xe8180001}, {0xc78, 0xe7190001},
+	{0xc78, 0xc81a0001}, {0xc78, 0xc71b0001},
+	{0xc78, 0xc61c0001}, {0xc78, 0x071d0001},
+	{0xc78, 0x061e0001}, {0xc78, 0x051f0001},
+	{0xc78, 0x04200001}, {0xc78, 0x03210001},
+	{0xc78, 0xaa220001}, {0xc78, 0xa9230001},
+	{0xc78, 0xa8240001}, {0xc78, 0xa7250001},
+	{0xc78, 0xa6260001}, {0xc78, 0x85270001},
+	{0xc78, 0x84280001}, {0xc78, 0x83290001},
+	{0xc78, 0x252a0001}, {0xc78, 0x242b0001},
+	{0xc78, 0x232c0001}, {0xc78, 0x222d0001},
+	{0xc78, 0x672e0001}, {0xc78, 0x662f0001},
+	{0xc78, 0x65300001}, {0xc78, 0x64310001},
+	{0xc78, 0x63320001}, {0xc78, 0x62330001},
+	{0xc78, 0x61340001}, {0xc78, 0x45350001},
+	{0xc78, 0x44360001}, {0xc78, 0x43370001},
+	{0xc78, 0x42380001}, {0xc78, 0x41390001},
+	{0xc78, 0x403a0001}, {0xc78, 0x403b0001},
+	{0xc78, 0x403c0001}, {0xc78, 0x403d0001},
+	{0xc78, 0x403e0001}, {0xc78, 0x403f0001},
+	{0xc78, 0xfb400001}, {0xc78, 0xfb410001},
+	{0xc78, 0xfb420001}, {0xc78, 0xfb430001},
+	{0xc78, 0xfb440001}, {0xc78, 0xfb450001},
+	{0xc78, 0xfa460001}, {0xc78, 0xf9470001},
+	{0xc78, 0xf8480001}, {0xc78, 0xf7490001},
+	{0xc78, 0xf64a0001}, {0xc78, 0xf54b0001},
+	{0xc78, 0xf44c0001}, {0xc78, 0xf34d0001},
+	{0xc78, 0xf24e0001}, {0xc78, 0xf14f0001},
+	{0xc78, 0xf0500001}, {0xc78, 0xef510001},
+	{0xc78, 0xee520001}, {0xc78, 0xed530001},
+	{0xc78, 0xec540001}, {0xc78, 0xeb550001},
+	{0xc78, 0xea560001}, {0xc78, 0xe9570001},
+	{0xc78, 0xe8580001}, {0xc78, 0xe7590001},
+	{0xc78, 0xe65a0001}, {0xc78, 0xe55b0001},
+	{0xc78, 0xe45c0001}, {0xc78, 0xe35d0001},
+	{0xc78, 0xe25e0001}, {0xc78, 0xe15f0001},
+	{0xc78, 0x8a600001}, {0xc78, 0x89610001},
+	{0xc78, 0x88620001}, {0xc78, 0x87630001},
+	{0xc78, 0x86640001}, {0xc78, 0x85650001},
+	{0xc78, 0x84660001}, {0xc78, 0x83670001},
+	{0xc78, 0x82680001}, {0xc78, 0x6b690001},
+	{0xc78, 0x6a6a0001}, {0xc78, 0x696b0001},
+	{0xc78, 0x686c0001}, {0xc78, 0x676d0001},
+	{0xc78, 0x666e0001}, {0xc78, 0x656f0001},
+	{0xc78, 0x64700001}, {0xc78, 0x63710001},
+	{0xc78, 0x62720001}, {0xc78, 0x61730001},
+	{0xc78, 0x49740001}, {0xc78, 0x48750001},
+	{0xc78, 0x47760001}, {0xc78, 0x46770001},
+	{0xc78, 0x45780001}, {0xc78, 0x44790001},
+	{0xc78, 0x437a0001}, {0xc78, 0x427b0001},
+	{0xc78, 0x417c0001}, {0xc78, 0x407d0001},
+	{0xc78, 0x407e0001}, {0xc78, 0x407f0001},
+	{0xc50, 0x00040022}, {0xc50, 0x00040020},
+	{0xffff, 0xffffffff}
+};
+
+static const struct rtl8xxxu_reg32val rtl8xxx_agc_8192eu_highpa_table[] = {
+	{0xc78, 0xfa000001}, {0xc78, 0xf9010001},
+	{0xc78, 0xf8020001}, {0xc78, 0xf7030001},
+	{0xc78, 0xf6040001}, {0xc78, 0xf5050001},
+	{0xc78, 0xf4060001}, {0xc78, 0xf3070001},
+	{0xc78, 0xf2080001}, {0xc78, 0xf1090001},
+	{0xc78, 0xf00a0001}, {0xc78, 0xef0b0001},
+	{0xc78, 0xee0c0001}, {0xc78, 0xed0d0001},
+	{0xc78, 0xec0e0001}, {0xc78, 0xeb0f0001},
+	{0xc78, 0xea100001}, {0xc78, 0xe9110001},
+	{0xc78, 0xe8120001}, {0xc78, 0xe7130001},
+	{0xc78, 0xe6140001}, {0xc78, 0xe5150001},
+	{0xc78, 0xe4160001}, {0xc78, 0xe3170001},
+	{0xc78, 0xe2180001}, {0xc78, 0xe1190001},
+	{0xc78, 0x8a1a0001}, {0xc78, 0x891b0001},
+	{0xc78, 0x881c0001}, {0xc78, 0x871d0001},
+	{0xc78, 0x861e0001}, {0xc78, 0x851f0001},
+	{0xc78, 0x84200001}, {0xc78, 0x83210001},
+	{0xc78, 0x82220001}, {0xc78, 0x6a230001},
+	{0xc78, 0x69240001}, {0xc78, 0x68250001},
+	{0xc78, 0x67260001}, {0xc78, 0x66270001},
+	{0xc78, 0x65280001}, {0xc78, 0x64290001},
+	{0xc78, 0x632a0001}, {0xc78, 0x622b0001},
+	{0xc78, 0x612c0001}, {0xc78, 0x602d0001},
+	{0xc78, 0x472e0001}, {0xc78, 0x462f0001},
+	{0xc78, 0x45300001}, {0xc78, 0x44310001},
+	{0xc78, 0x43320001}, {0xc78, 0x42330001},
+	{0xc78, 0x41340001}, {0xc78, 0x40350001},
+	{0xc78, 0x40360001}, {0xc78, 0x40370001},
+	{0xc78, 0x40380001}, {0xc78, 0x40390001},
+	{0xc78, 0x403a0001}, {0xc78, 0x403b0001},
+	{0xc78, 0x403c0001}, {0xc78, 0x403d0001},
+	{0xc78, 0x403e0001}, {0xc78, 0x403f0001},
+	{0xc78, 0xfa400001}, {0xc78, 0xf9410001},
+	{0xc78, 0xf8420001}, {0xc78, 0xf7430001},
+	{0xc78, 0xf6440001}, {0xc78, 0xf5450001},
+	{0xc78, 0xf4460001}, {0xc78, 0xf3470001},
+	{0xc78, 0xf2480001}, {0xc78, 0xf1490001},
+	{0xc78, 0xf04a0001}, {0xc78, 0xef4b0001},
+	{0xc78, 0xee4c0001}, {0xc78, 0xed4d0001},
+	{0xc78, 0xec4e0001}, {0xc78, 0xeb4f0001},
+	{0xc78, 0xea500001}, {0xc78, 0xe9510001},
+	{0xc78, 0xe8520001}, {0xc78, 0xe7530001},
+	{0xc78, 0xe6540001}, {0xc78, 0xe5550001},
+	{0xc78, 0xe4560001}, {0xc78, 0xe3570001},
+	{0xc78, 0xe2580001}, {0xc78, 0xe1590001},
+	{0xc78, 0x8a5a0001}, {0xc78, 0x895b0001},
+	{0xc78, 0x885c0001}, {0xc78, 0x875d0001},
+	{0xc78, 0x865e0001}, {0xc78, 0x855f0001},
+	{0xc78, 0x84600001}, {0xc78, 0x83610001},
+	{0xc78, 0x82620001}, {0xc78, 0x6a630001},
+	{0xc78, 0x69640001}, {0xc78, 0x68650001},
+	{0xc78, 0x67660001}, {0xc78, 0x66670001},
+	{0xc78, 0x65680001}, {0xc78, 0x64690001},
+	{0xc78, 0x636a0001}, {0xc78, 0x626b0001},
+	{0xc78, 0x616c0001}, {0xc78, 0x606d0001},
+	{0xc78, 0x476e0001}, {0xc78, 0x466f0001},
+	{0xc78, 0x45700001}, {0xc78, 0x44710001},
+	{0xc78, 0x43720001}, {0xc78, 0x42730001},
+	{0xc78, 0x41740001}, {0xc78, 0x40750001},
+	{0xc78, 0x40760001}, {0xc78, 0x40770001},
+	{0xc78, 0x40780001}, {0xc78, 0x40790001},
+	{0xc78, 0x407a0001}, {0xc78, 0x407b0001},
+	{0xc78, 0x407c0001}, {0xc78, 0x407d0001},
+	{0xc78, 0x407e0001}, {0xc78, 0x407f0001},
+	{0xc50, 0x00040222}, {0xc50, 0x00040220},
+	{0xffff, 0xffffffff}
+};
+
+static const struct rtl8xxxu_rfregval rtl8192eu_radioa_init_table[] = {
+	{0x7f, 0x00000082}, {0x81, 0x0003fc00},
+	{0x00, 0x00030000}, {0x08, 0x00008400},
+	{0x18, 0x00000407}, {0x19, 0x00000012},
+	{0x1b, 0x00000064}, {0x1e, 0x00080009},
+	{0x1f, 0x00000880}, {0x2f, 0x0001a060},
+	{0x3f, 0x00000000}, {0x42, 0x000060c0},
+	{0x57, 0x000d0000}, {0x58, 0x000be180},
+	{0x67, 0x00001552}, {0x83, 0x00000000},
+	{0xb0, 0x000ff9f1}, {0xb1, 0x00055418},
+	{0xb2, 0x0008cc00}, {0xb4, 0x00043083},
+	{0xb5, 0x00008166}, {0xb6, 0x0000803e},
+	{0xb7, 0x0001c69f}, {0xb8, 0x0000407f},
+	{0xb9, 0x00080001}, {0xba, 0x00040001},
+	{0xbb, 0x00000400}, {0xbf, 0x000c0000},
+	{0xc2, 0x00002400}, {0xc3, 0x00000009},
+	{0xc4, 0x00040c91}, {0xc5, 0x00099999},
+	{0xc6, 0x000000a3}, {0xc7, 0x00088820},
+	{0xc8, 0x00076c06}, {0xc9, 0x00000000},
+	{0xca, 0x00080000}, {0xdf, 0x00000180},
+	{0xef, 0x000001a0}, {0x51, 0x00069545},
+	{0x52, 0x0007e45e}, {0x53, 0x00000071},
+	{0x56, 0x00051ff3}, {0x35, 0x000000a8},
+	{0x35, 0x000001e2}, {0x35, 0x000002a8},
+	{0x36, 0x00001c24}, {0x36, 0x00009c24},
+	{0x36, 0x00011c24}, {0x36, 0x00019c24},
+	{0x18, 0x00000c07}, {0x5a, 0x00048000},
+	{0x19, 0x000739d0},
+#ifdef EXT_PA_8192EU
+	/* External PA or external LNA */
+	{0x34, 0x0000a093}, {0x34, 0x0000908f},
+	{0x34, 0x0000808c}, {0x34, 0x0000704d},
+	{0x34, 0x0000604a}, {0x34, 0x00005047},
+	{0x34, 0x0000400a}, {0x34, 0x00003007},
+	{0x34, 0x00002004}, {0x34, 0x00001001},
+	{0x34, 0x00000000},
+#else
+	/* Regular */
+	{0x34, 0x0000add7}, {0x34, 0x00009dd4},
+	{0x34, 0x00008dd1}, {0x34, 0x00007dce},
+	{0x34, 0x00006dcb}, {0x34, 0x00005dc8},
+	{0x34, 0x00004dc5}, {0x34, 0x000034cc},
+	{0x34, 0x0000244f}, {0x34, 0x0000144c},
+	{0x34, 0x00000014},
+#endif
+	{0x00, 0x00030159},
+	{0x84, 0x00068180},
+	{0x86, 0x0000014e},
+	{0x87, 0x00048e00},
+	{0x8e, 0x00065540},
+	{0x8f, 0x00088000},
+	{0xef, 0x000020a0},
+#ifdef EXT_PA_8192EU
+	/* External PA or external LNA */
+	{0x3b, 0x000f07b0},
+#else
+	{0x3b, 0x000f02b0},
+#endif
+	{0x3b, 0x000ef7b0}, {0x3b, 0x000d4fb0},
+	{0x3b, 0x000cf060}, {0x3b, 0x000b0090},
+	{0x3b, 0x000a0080}, {0x3b, 0x00090080},
+	{0x3b, 0x0008f780},
+#ifdef EXT_PA_8192EU
+	/* External PA or external LNA */
+	{0x3b, 0x000787b0},
+#else
+	{0x3b, 0x00078730},
+#endif
+	{0x3b, 0x00060fb0}, {0x3b, 0x0005ffa0},
+	{0x3b, 0x00040620}, {0x3b, 0x00037090},
+	{0x3b, 0x00020080}, {0x3b, 0x0001f060},
+	{0x3b, 0x0000ffb0}, {0xef, 0x000000a0},
+	{0xfe, 0x00000000}, {0x18, 0x0000fc07},
+	{0xfe, 0x00000000}, {0xfe, 0x00000000},
+	{0xfe, 0x00000000}, {0xfe, 0x00000000},
+	{0x1e, 0x00000001}, {0x1f, 0x00080000},
+	{0x00, 0x00033e70},
+	{0xff, 0xffffffff}
+};
+
+static const struct rtl8xxxu_rfregval rtl8192eu_radiob_init_table[] = {
+	{0x7f, 0x00000082}, {0x81, 0x0003fc00},
+	{0x00, 0x00030000}, {0x08, 0x00008400},
+	{0x18, 0x00000407}, {0x19, 0x00000012},
+	{0x1b, 0x00000064}, {0x1e, 0x00080009},
+	{0x1f, 0x00000880}, {0x2f, 0x0001a060},
+	{0x3f, 0x00000000}, {0x42, 0x000060c0},
+	{0x57, 0x000d0000}, {0x58, 0x000be180},
+	{0x67, 0x00001552}, {0x7f, 0x00000082},
+	{0x81, 0x0003f000}, {0x83, 0x00000000},
+	{0xdf, 0x00000180}, {0xef, 0x000001a0},
+	{0x51, 0x00069545}, {0x52, 0x0007e42e},
+	{0x53, 0x00000071}, {0x56, 0x00051ff3},
+	{0x35, 0x000000a8}, {0x35, 0x000001e0},
+	{0x35, 0x000002a8}, {0x36, 0x00001ca8},
+	{0x36, 0x00009c24}, {0x36, 0x00011c24},
+	{0x36, 0x00019c24}, {0x18, 0x00000c07},
+	{0x5a, 0x00048000}, {0x19, 0x000739d0},
+#ifdef EXT_PA_8192EU
+	/* External PA or external LNA */
+	{0x34, 0x0000a093}, {0x34, 0x0000908f},
+	{0x34, 0x0000808c}, {0x34, 0x0000704d},
+	{0x34, 0x0000604a}, {0x34, 0x00005047},
+	{0x34, 0x0000400a}, {0x34, 0x00003007},
+	{0x34, 0x00002004}, {0x34, 0x00001001},
+	{0x34, 0x00000000},
+#else
+	{0x34, 0x0000add7}, {0x34, 0x00009dd4},
+	{0x34, 0x00008dd1}, {0x34, 0x00007dce},
+	{0x34, 0x00006dcb}, {0x34, 0x00005dc8},
+	{0x34, 0x00004dc5}, {0x34, 0x000034cc},
+	{0x34, 0x0000244f}, {0x34, 0x0000144c},
+	{0x34, 0x00000014},
+#endif
+	{0x00, 0x00030159}, {0x84, 0x00068180},
+	{0x86, 0x000000ce}, {0x87, 0x00048a00},
+	{0x8e, 0x00065540}, {0x8f, 0x00088000},
+	{0xef, 0x000020a0},
+#ifdef EXT_PA_8192EU
+	/* External PA or external LNA */
+	{0x3b, 0x000f07b0},
+#else
+	{0x3b, 0x000f02b0},
+#endif
+
+	{0x3b, 0x000ef7b0}, {0x3b, 0x000d4fb0},
+	{0x3b, 0x000cf060}, {0x3b, 0x000b0090},
+	{0x3b, 0x000a0080}, {0x3b, 0x00090080},
+	{0x3b, 0x0008f780},
+#ifdef EXT_PA_8192EU
+	/* External PA or external LNA */
+	{0x3b, 0x000787b0},
+#else
+	{0x3b, 0x00078730},
+#endif
+	{0x3b, 0x00060fb0}, {0x3b, 0x0005ffa0},
+	{0x3b, 0x00040620}, {0x3b, 0x00037090},
+	{0x3b, 0x00020080}, {0x3b, 0x0001f060},
+	{0x3b, 0x0000ffb0}, {0xef, 0x000000a0},
+	{0x00, 0x00010159}, {0xfe, 0x00000000},
+	{0xfe, 0x00000000}, {0xfe, 0x00000000},
+	{0xfe, 0x00000000}, {0x1e, 0x00000001},
+	{0x1f, 0x00080000}, {0x00, 0x00033e70},
+	{0xff, 0xffffffff}
+};
+
+static int rtl8192eu_identify_chip(struct rtl8xxxu_priv *priv)
+{
+	struct device *dev = &priv->udev->dev;
+	u32 val32, bonding, sys_cfg, vendor;
+	int ret = 0;
+
+	sys_cfg = rtl8xxxu_read32(priv, REG_SYS_CFG);
+	priv->chip_cut = u32_get_bits(sys_cfg, SYS_CFG_CHIP_VERSION_MASK);
+	if (sys_cfg & SYS_CFG_TRP_VAUX_EN) {
+		dev_info(dev, "Unsupported test chip\n");
+		ret = -ENOTSUPP;
+		goto out;
+	}
+
+	bonding = rtl8xxxu_read32(priv, REG_HPON_FSM);
+	bonding &= HPON_FSM_BONDING_MASK;
+	if (bonding == HPON_FSM_BONDING_1T2R) {
+		strscpy(priv->chip_name, "8191EU", sizeof(priv->chip_name));
+		priv->tx_paths = 1;
+		priv->rtl_chip = RTL8191E;
+	} else {
+		strscpy(priv->chip_name, "8192EU", sizeof(priv->chip_name));
+		priv->tx_paths = 2;
+		priv->rtl_chip = RTL8192E;
+	}
+	priv->rf_paths = 2;
+	priv->rx_paths = 2;
+	priv->has_wifi = 1;
+
+	vendor = sys_cfg & SYS_CFG_VENDOR_EXT_MASK;
+	rtl8xxxu_identify_vendor_2bits(priv, vendor);
+
+	val32 = rtl8xxxu_read32(priv, REG_GPIO_OUTSTS);
+	priv->rom_rev = u32_get_bits(val32, GPIO_RF_RL_ID);
+
+	rtl8xxxu_config_endpoints_sie(priv);
+
+	/*
+	 * Fallback for devices that do not provide REG_NORMAL_SIE_EP_TX
+	 */
+	if (!priv->ep_tx_count)
+		ret = rtl8xxxu_config_endpoints_no_sie(priv);
+
+out:
+	return ret;
+}
+
+static void
+rtl8192e_set_tx_power(struct rtl8xxxu_priv *priv, int channel, bool ht40)
+{
+	u32 val32, ofdm, mcs;
+	u8 cck, ofdmbase, mcsbase;
+	int group, tx_idx;
+
+	tx_idx = 0;
+	group = rtl8xxxu_gen2_channel_to_group(channel);
+
+	cck = priv->cck_tx_power_index_A[group];
+
+	val32 = rtl8xxxu_read32(priv, REG_TX_AGC_A_CCK1_MCS32);
+	val32 &= 0xffff00ff;
+	val32 |= (cck << 8);
+	rtl8xxxu_write32(priv, REG_TX_AGC_A_CCK1_MCS32, val32);
+
+	val32 = rtl8xxxu_read32(priv, REG_TX_AGC_B_CCK11_A_CCK2_11);
+	val32 &= 0xff;
+	val32 |= ((cck << 8) | (cck << 16) | (cck << 24));
+	rtl8xxxu_write32(priv, REG_TX_AGC_B_CCK11_A_CCK2_11, val32);
+
+	ofdmbase = priv->ht40_1s_tx_power_index_A[group];
+	ofdmbase += priv->ofdm_tx_power_diff[tx_idx].a;
+	ofdm = ofdmbase | ofdmbase << 8 | ofdmbase << 16 | ofdmbase << 24;
+
+	rtl8xxxu_write32(priv, REG_TX_AGC_A_RATE18_06, ofdm);
+	rtl8xxxu_write32(priv, REG_TX_AGC_A_RATE54_24, ofdm);
+
+	mcsbase = priv->ht40_1s_tx_power_index_A[group];
+	if (ht40)
+		mcsbase += priv->ht40_tx_power_diff[tx_idx++].a;
+	else
+		mcsbase += priv->ht20_tx_power_diff[tx_idx++].a;
+	mcs = mcsbase | mcsbase << 8 | mcsbase << 16 | mcsbase << 24;
+
+	rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS03_MCS00, mcs);
+	rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS07_MCS04, mcs);
+	rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS11_MCS08, mcs);
+	rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS15_MCS12, mcs);
+
+	if (priv->tx_paths > 1) {
+		cck = priv->cck_tx_power_index_B[group];
+
+		val32 = rtl8xxxu_read32(priv, REG_TX_AGC_B_CCK1_55_MCS32);
+		val32 &= 0xff;
+		val32 |= ((cck << 8) | (cck << 16) | (cck << 24));
+		rtl8xxxu_write32(priv, REG_TX_AGC_B_CCK1_55_MCS32, val32);
+
+		val32 = rtl8xxxu_read32(priv, REG_TX_AGC_B_CCK11_A_CCK2_11);
+		val32 &= 0xffffff00;
+		val32 |= cck;
+		rtl8xxxu_write32(priv, REG_TX_AGC_B_CCK11_A_CCK2_11, val32);
+
+		ofdmbase = priv->ht40_1s_tx_power_index_B[group];
+		ofdmbase += priv->ofdm_tx_power_diff[tx_idx].b;
+		ofdm = ofdmbase | ofdmbase << 8 |
+			ofdmbase << 16 | ofdmbase << 24;
+
+		rtl8xxxu_write32(priv, REG_TX_AGC_B_RATE18_06, ofdm);
+		rtl8xxxu_write32(priv, REG_TX_AGC_B_RATE54_24, ofdm);
+
+		mcsbase = priv->ht40_1s_tx_power_index_B[group];
+		if (ht40)
+			mcsbase += priv->ht40_tx_power_diff[tx_idx++].b;
+		else
+			mcsbase += priv->ht20_tx_power_diff[tx_idx++].b;
+		mcs = mcsbase | mcsbase << 8 | mcsbase << 16 | mcsbase << 24;
+
+		rtl8xxxu_write32(priv, REG_TX_AGC_B_MCS03_MCS00, mcs);
+		rtl8xxxu_write32(priv, REG_TX_AGC_B_MCS07_MCS04, mcs);
+		rtl8xxxu_write32(priv, REG_TX_AGC_B_MCS11_MCS08, mcs);
+		rtl8xxxu_write32(priv, REG_TX_AGC_B_MCS15_MCS12, mcs);
+	}
+}
+
+static int rtl8192eu_parse_efuse(struct rtl8xxxu_priv *priv)
+{
+	struct rtl8192eu_efuse *efuse = &priv->efuse_wifi.efuse8192eu;
+	int i;
+
+	if (efuse->rtl_id != cpu_to_le16(0x8129))
+		return -EINVAL;
+
+	ether_addr_copy(priv->mac_addr, efuse->mac_addr);
+
+	memcpy(priv->cck_tx_power_index_A, efuse->tx_power_index_A.cck_base,
+	       sizeof(efuse->tx_power_index_A.cck_base));
+	memcpy(priv->cck_tx_power_index_B, efuse->tx_power_index_B.cck_base,
+	       sizeof(efuse->tx_power_index_B.cck_base));
+
+	memcpy(priv->ht40_1s_tx_power_index_A,
+	       efuse->tx_power_index_A.ht40_base,
+	       sizeof(efuse->tx_power_index_A.ht40_base));
+	memcpy(priv->ht40_1s_tx_power_index_B,
+	       efuse->tx_power_index_B.ht40_base,
+	       sizeof(efuse->tx_power_index_B.ht40_base));
+
+	priv->ht20_tx_power_diff[0].a =
+		efuse->tx_power_index_A.ht20_ofdm_1s_diff.b;
+	priv->ht20_tx_power_diff[0].b =
+		efuse->tx_power_index_B.ht20_ofdm_1s_diff.b;
+
+	priv->ht40_tx_power_diff[0].a = 0;
+	priv->ht40_tx_power_diff[0].b = 0;
+
+	for (i = 1; i < RTL8723B_TX_COUNT; i++) {
+		priv->ofdm_tx_power_diff[i].a =
+			efuse->tx_power_index_A.pwr_diff[i - 1].ofdm;
+		priv->ofdm_tx_power_diff[i].b =
+			efuse->tx_power_index_B.pwr_diff[i - 1].ofdm;
+
+		priv->ht20_tx_power_diff[i].a =
+			efuse->tx_power_index_A.pwr_diff[i - 1].ht20;
+		priv->ht20_tx_power_diff[i].b =
+			efuse->tx_power_index_B.pwr_diff[i - 1].ht20;
+
+		priv->ht40_tx_power_diff[i].a =
+			efuse->tx_power_index_A.pwr_diff[i - 1].ht40;
+		priv->ht40_tx_power_diff[i].b =
+			efuse->tx_power_index_B.pwr_diff[i - 1].ht40;
+	}
+
+	priv->default_crystal_cap = priv->efuse_wifi.efuse8192eu.xtal_k & 0x3f;
+
+	return 0;
+}
+
+static int rtl8192eu_load_firmware(struct rtl8xxxu_priv *priv)
+{
+	const char *fw_name;
+	int ret;
+
+	fw_name = "rtlwifi/rtl8192eu_nic.bin";
+
+	ret = rtl8xxxu_load_firmware(priv, fw_name);
+
+	return ret;
+}
+
+static void rtl8192eu_init_phy_bb(struct rtl8xxxu_priv *priv)
+{
+	u8 val8;
+	u16 val16;
+
+	val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC);
+	val16 |= SYS_FUNC_BB_GLB_RSTN | SYS_FUNC_BBRSTB | SYS_FUNC_DIO_RF;
+	rtl8xxxu_write16(priv, REG_SYS_FUNC, val16);
+
+	/* 6. 0x1f[7:0] = 0x07 */
+	val8 = RF_ENABLE | RF_RSTB | RF_SDMRSTB;
+	rtl8xxxu_write8(priv, REG_RF_CTRL, val8);
+
+	val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC);
+	val16 |= (SYS_FUNC_USBA | SYS_FUNC_USBD | SYS_FUNC_DIO_RF |
+		  SYS_FUNC_BB_GLB_RSTN | SYS_FUNC_BBRSTB);
+	rtl8xxxu_write16(priv, REG_SYS_FUNC, val16);
+	val8 = RF_ENABLE | RF_RSTB | RF_SDMRSTB;
+	rtl8xxxu_write8(priv, REG_RF_CTRL, val8);
+	rtl8xxxu_init_phy_regs(priv, rtl8192eu_phy_init_table);
+
+	if (priv->hi_pa)
+		rtl8xxxu_init_phy_regs(priv, rtl8xxx_agc_8192eu_highpa_table);
+	else
+		rtl8xxxu_init_phy_regs(priv, rtl8xxx_agc_8192eu_std_table);
+}
+
+static int rtl8192eu_init_phy_rf(struct rtl8xxxu_priv *priv)
+{
+	int ret;
+
+	ret = rtl8xxxu_init_phy_rf(priv, rtl8192eu_radioa_init_table, RF_A);
+	if (ret)
+		goto exit;
+
+	ret = rtl8xxxu_init_phy_rf(priv, rtl8192eu_radiob_init_table, RF_B);
+
+exit:
+	return ret;
+}
+
+static int rtl8192eu_iqk_path_a(struct rtl8xxxu_priv *priv)
+{
+	u32 reg_eac, reg_e94, reg_e9c;
+	int result = 0;
+
+	/*
+	 * TX IQK
+	 * PA/PAD controlled by 0x0
+	 */
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_GAIN_CCA, 0x00180);
+
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, 0x800a0);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x20000);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0000f);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0x07f77);
+
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000);
+
+	/* Path A IQK setting */
+	rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x18008c1c);
+	rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x38008c1c);
+	rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x38008c1c);
+	rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c);
+
+	rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x82140303);
+	rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x68160000);
+
+	/* LO calibration setting */
+	rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x00462911);
+
+	/* One shot, path A LOK & IQK */
+	rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000);
+	rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000);
+
+	mdelay(10);
+
+	/* Check failed */
+	reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2);
+	reg_e94 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_A);
+	reg_e9c = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_A);
+
+	if (!(reg_eac & BIT(28)) &&
+	    ((reg_e94 & 0x03ff0000) != 0x01420000) &&
+	    ((reg_e9c & 0x03ff0000) != 0x00420000))
+		result |= 0x01;
+
+	return result;
+}
+
+static int rtl8192eu_rx_iqk_path_a(struct rtl8xxxu_priv *priv)
+{
+	u32 reg_ea4, reg_eac, reg_e94, reg_e9c, val32;
+	int result = 0;
+
+	/* Leave IQK mode */
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00);
+
+	/* Enable path A PA in TX IQK mode */
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, 0x800a0);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x30000);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0000f);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf1173);
+
+	rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_WE_LUT, 0x800a0);
+	rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_RCK_OS, 0x30000);
+	rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_TXPA_G1, 0x0000f);
+	rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_TXPA_G2, 0xf1173);
+
+	/* PA/PAD control by 0x56, and set = 0x0 */
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_GAIN_CCA, 0x00980);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_PAD_TXG, 0x511e0);
+
+	/* Enter IQK mode */
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000);
+
+	/* TX IQK setting */
+	rtl8xxxu_write32(priv, REG_TX_IQK, 0x01007c00);
+	rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800);
+
+	/* path-A IQK setting */
+	rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x18008c1c);
+	rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x38008c1c);
+	rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x38008c1c);
+	rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c);
+
+	rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x8216031f);
+	rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x6816031f);
+
+	/* LO calibration setting */
+	rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x0046a911);
+
+	/* One shot, path A LOK & IQK */
+	rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000);
+	rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000);
+
+	mdelay(10);
+
+	/* Check failed */
+	reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2);
+	reg_e94 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_A);
+	reg_e9c = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_A);
+
+	if (!(reg_eac & BIT(28)) &&
+	    ((reg_e94 & 0x03ff0000) != 0x01420000) &&
+	    ((reg_e9c & 0x03ff0000) != 0x00420000)) {
+		result |= 0x01;
+	} else {
+		/* PA/PAD controlled by 0x0 */
+		rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000);
+		rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_GAIN_CCA, 0x180);
+		goto out;
+	}
+
+	val32 = 0x80007c00 |
+		(reg_e94 & 0x03ff0000) | ((reg_e9c >> 16) & 0x03ff);
+	rtl8xxxu_write32(priv, REG_TX_IQK, val32);
+
+	/* Modify RX IQK mode table */
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000);
+
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, 0x800a0);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x30000);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0000f);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf7ff2);
+
+	rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_WE_LUT, 0x800a0);
+	rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_RCK_OS, 0x30000);
+	rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_TXPA_G1, 0x0000f);
+	rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_TXPA_G2, 0xf7ff2);
+
+	/* PA/PAD control by 0x56, and set = 0x0 */
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_GAIN_CCA, 0x00980);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_PAD_TXG, 0x510e0);
+
+	/* Enter IQK mode */
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000);
+
+	/* IQK setting */
+	rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800);
+
+	/* Path A IQK setting */
+	rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x38008c1c);
+	rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x18008c1c);
+	rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x38008c1c);
+	rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c);
+
+	rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x821608ff);
+	rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x281608ff);
+
+	/* LO calibration setting */
+	rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x0046a891);
+
+	/* One shot, path A LOK & IQK */
+	rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000);
+	rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000);
+
+	mdelay(10);
+
+	reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2);
+	reg_ea4 = rtl8xxxu_read32(priv, REG_RX_POWER_BEFORE_IQK_A_2);
+
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_GAIN_CCA, 0x180);
+
+	if (!(reg_eac & BIT(27)) &&
+	    ((reg_ea4 & 0x03ff0000) != 0x01320000) &&
+	    ((reg_eac & 0x03ff0000) != 0x00360000))
+		result |= 0x02;
+	else
+		dev_warn(&priv->udev->dev, "%s: Path A RX IQK failed!\n",
+			 __func__);
+
+out:
+	return result;
+}
+
+static int rtl8192eu_iqk_path_b(struct rtl8xxxu_priv *priv)
+{
+	u32 reg_eac, reg_eb4, reg_ebc;
+	int result = 0;
+
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000);
+	rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_GAIN_CCA, 0x00180);
+
+	rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_WE_LUT, 0x800a0);
+	rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_RCK_OS, 0x20000);
+	rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_TXPA_G1, 0x0000f);
+	rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_TXPA_G2, 0x07f77);
+
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000);
+
+	/* Path B IQK setting */
+	rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x38008c1c);
+	rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x38008c1c);
+	rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x18008c1c);
+	rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c);
+
+	rtl8xxxu_write32(priv, REG_TX_IQK_PI_B, 0x82140303);
+	rtl8xxxu_write32(priv, REG_RX_IQK_PI_B, 0x68160000);
+
+	/* LO calibration setting */
+	rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x00462911);
+
+	/* One shot, path A LOK & IQK */
+	rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xfa000000);
+	rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000);
+
+	mdelay(1);
+
+	/* Check failed */
+	reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2);
+	reg_eb4 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_B);
+	reg_ebc = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_B);
+
+	if (!(reg_eac & BIT(31)) &&
+	    ((reg_eb4 & 0x03ff0000) != 0x01420000) &&
+	    ((reg_ebc & 0x03ff0000) != 0x00420000))
+		result |= 0x01;
+	else
+		dev_warn(&priv->udev->dev, "%s: Path B IQK failed!\n",
+			 __func__);
+
+	return result;
+}
+
+static int rtl8192eu_rx_iqk_path_b(struct rtl8xxxu_priv *priv)
+{
+	u32 reg_eac, reg_eb4, reg_ebc, reg_ec4, reg_ecc, val32;
+	int result = 0;
+
+	/* Leave IQK mode */
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000);
+
+	/* Enable path A PA in TX IQK mode */
+	rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_WE_LUT, 0x800a0);
+	rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_RCK_OS, 0x30000);
+	rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_TXPA_G1, 0x0000f);
+	rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_TXPA_G2, 0xf1173);
+
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, 0x800a0);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x30000);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0000f);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf1173);
+
+	/* PA/PAD control by 0x56, and set = 0x0 */
+	rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_GAIN_CCA, 0x00980);
+	rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_PAD_TXG, 0x511e0);
+
+	/* Enter IQK mode */
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000);
+
+	/* TX IQK setting */
+	rtl8xxxu_write32(priv, REG_TX_IQK, 0x01007c00);
+	rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800);
+
+	/* path-A IQK setting */
+	rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x38008c1c);
+	rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x38008c1c);
+	rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x18008c1c);
+	rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c);
+
+	rtl8xxxu_write32(priv, REG_TX_IQK_PI_B, 0x8216031f);
+	rtl8xxxu_write32(priv, REG_RX_IQK_PI_B, 0x6816031f);
+
+	/* LO calibration setting */
+	rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x0046a911);
+
+	/* One shot, path A LOK & IQK */
+	rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xfa000000);
+	rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000);
+
+	mdelay(10);
+
+	/* Check failed */
+	reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2);
+	reg_eb4 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_B);
+	reg_ebc = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_B);
+
+	if (!(reg_eac & BIT(31)) &&
+	    ((reg_eb4 & 0x03ff0000) != 0x01420000) &&
+	    ((reg_ebc & 0x03ff0000) != 0x00420000)) {
+		result |= 0x01;
+	} else {
+		/*
+		 * PA/PAD controlled by 0x0
+		 * Vendor driver restores RF_A here which I believe is a bug
+		 */
+		rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000);
+		rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_GAIN_CCA, 0x180);
+		goto out;
+	}
+
+	val32 = 0x80007c00 |
+		(reg_eb4 & 0x03ff0000) | ((reg_ebc >> 16) & 0x03ff);
+	rtl8xxxu_write32(priv, REG_TX_IQK, val32);
+
+	/* Modify RX IQK mode table */
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000);
+
+	rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_WE_LUT, 0x800a0);
+	rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_RCK_OS, 0x30000);
+	rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_TXPA_G1, 0x0000f);
+	rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_TXPA_G2, 0xf7ff2);
+
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, 0x800a0);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x30000);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0000f);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf7ff2);
+
+	/* PA/PAD control by 0x56, and set = 0x0 */
+	rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_GAIN_CCA, 0x00980);
+	rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_PAD_TXG, 0x510e0);
+
+	/* Enter IQK mode */
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000);
+
+	/* IQK setting */
+	rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800);
+
+	/* Path A IQK setting */
+	rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x38008c1c);
+	rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x38008c1c);
+	rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x38008c1c);
+	rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x18008c1c);
+
+	rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x821608ff);
+	rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x281608ff);
+
+	/* LO calibration setting */
+	rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x0046a891);
+
+	/* One shot, path A LOK & IQK */
+	rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xfa000000);
+	rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000);
+
+	mdelay(10);
+
+	reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2);
+	reg_ec4 = rtl8xxxu_read32(priv, REG_RX_POWER_BEFORE_IQK_B_2);
+	reg_ecc = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_B_2);
+
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000);
+	rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_GAIN_CCA, 0x180);
+
+	if (!(reg_eac & BIT(30)) &&
+	    ((reg_ec4 & 0x03ff0000) != 0x01320000) &&
+	    ((reg_ecc & 0x03ff0000) != 0x00360000))
+		result |= 0x02;
+	else
+		dev_warn(&priv->udev->dev, "%s: Path B RX IQK failed!\n",
+			 __func__);
+
+out:
+	return result;
+}
+
+static void rtl8192eu_phy_iqcalibrate(struct rtl8xxxu_priv *priv,
+				      int result[][8], int t)
+{
+	struct device *dev = &priv->udev->dev;
+	u32 i, val32;
+	int path_a_ok, path_b_ok;
+	int retry = 2;
+	static const u32 adda_regs[RTL8XXXU_ADDA_REGS] = {
+		REG_FPGA0_XCD_SWITCH_CTRL, REG_BLUETOOTH,
+		REG_RX_WAIT_CCA, REG_TX_CCK_RFON,
+		REG_TX_CCK_BBON, REG_TX_OFDM_RFON,
+		REG_TX_OFDM_BBON, REG_TX_TO_RX,
+		REG_TX_TO_TX, REG_RX_CCK,
+		REG_RX_OFDM, REG_RX_WAIT_RIFS,
+		REG_RX_TO_RX, REG_STANDBY,
+		REG_SLEEP, REG_PMPD_ANAEN
+	};
+	static const u32 iqk_mac_regs[RTL8XXXU_MAC_REGS] = {
+		REG_TXPAUSE, REG_BEACON_CTRL,
+		REG_BEACON_CTRL_1, REG_GPIO_MUXCFG
+	};
+	static const u32 iqk_bb_regs[RTL8XXXU_BB_REGS] = {
+		REG_OFDM0_TRX_PATH_ENABLE, REG_OFDM0_TR_MUX_PAR,
+		REG_FPGA0_XCD_RF_SW_CTRL, REG_CONFIG_ANT_A, REG_CONFIG_ANT_B,
+		REG_FPGA0_XAB_RF_SW_CTRL, REG_FPGA0_XA_RF_INT_OE,
+		REG_FPGA0_XB_RF_INT_OE, REG_CCK0_AFE_SETTING
+	};
+	u8 xa_agc = rtl8xxxu_read32(priv, REG_OFDM0_XA_AGC_CORE1) & 0xff;
+	u8 xb_agc = rtl8xxxu_read32(priv, REG_OFDM0_XB_AGC_CORE1) & 0xff;
+
+	/*
+	 * Note: IQ calibration must be performed after loading
+	 *       PHY_REG.txt , and radio_a, radio_b.txt
+	 */
+
+	if (t == 0) {
+		/* Save ADDA parameters, turn Path A ADDA on */
+		rtl8xxxu_save_regs(priv, adda_regs, priv->adda_backup,
+				   RTL8XXXU_ADDA_REGS);
+		rtl8xxxu_save_mac_regs(priv, iqk_mac_regs, priv->mac_backup);
+		rtl8xxxu_save_regs(priv, iqk_bb_regs,
+				   priv->bb_backup, RTL8XXXU_BB_REGS);
+	}
+
+	rtl8xxxu_path_adda_on(priv, adda_regs, true);
+
+	/* MAC settings */
+	rtl8xxxu_mac_calibration(priv, iqk_mac_regs, priv->mac_backup);
+
+	val32 = rtl8xxxu_read32(priv, REG_CCK0_AFE_SETTING);
+	val32 |= 0x0f000000;
+	rtl8xxxu_write32(priv, REG_CCK0_AFE_SETTING, val32);
+
+	rtl8xxxu_write32(priv, REG_OFDM0_TRX_PATH_ENABLE, 0x03a05600);
+	rtl8xxxu_write32(priv, REG_OFDM0_TR_MUX_PAR, 0x000800e4);
+	rtl8xxxu_write32(priv, REG_FPGA0_XCD_RF_SW_CTRL, 0x22208200);
+
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_XAB_RF_SW_CTRL);
+	val32 |= (FPGA0_RF_PAPE | (FPGA0_RF_PAPE << FPGA0_RF_BD_CTRL_SHIFT));
+	rtl8xxxu_write32(priv, REG_FPGA0_XAB_RF_SW_CTRL, val32);
+
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_XA_RF_INT_OE);
+	val32 |= BIT(10);
+	rtl8xxxu_write32(priv, REG_FPGA0_XA_RF_INT_OE, val32);
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_XB_RF_INT_OE);
+	val32 |= BIT(10);
+	rtl8xxxu_write32(priv, REG_FPGA0_XB_RF_INT_OE, val32);
+
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000);
+	rtl8xxxu_write32(priv, REG_TX_IQK, 0x01007c00);
+	rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800);
+
+	for (i = 0; i < retry; i++) {
+		path_a_ok = rtl8192eu_iqk_path_a(priv);
+		if (path_a_ok == 0x01) {
+			val32 = rtl8xxxu_read32(priv,
+						REG_TX_POWER_BEFORE_IQK_A);
+			result[t][0] = (val32 >> 16) & 0x3ff;
+			val32 = rtl8xxxu_read32(priv,
+						REG_TX_POWER_AFTER_IQK_A);
+			result[t][1] = (val32 >> 16) & 0x3ff;
+
+			break;
+		}
+	}
+
+	if (!path_a_ok)
+		dev_dbg(dev, "%s: Path A TX IQK failed!\n", __func__);
+
+	for (i = 0; i < retry; i++) {
+		path_a_ok = rtl8192eu_rx_iqk_path_a(priv);
+		if (path_a_ok == 0x03) {
+			val32 = rtl8xxxu_read32(priv,
+						REG_RX_POWER_BEFORE_IQK_A_2);
+			result[t][2] = (val32 >> 16) & 0x3ff;
+			val32 = rtl8xxxu_read32(priv,
+						REG_RX_POWER_AFTER_IQK_A_2);
+			result[t][3] = (val32 >> 16) & 0x3ff;
+
+			break;
+		}
+	}
+
+	if (!path_a_ok)
+		dev_dbg(dev, "%s: Path A RX IQK failed!\n", __func__);
+
+	if (priv->rf_paths > 1) {
+		/* Path A into standby */
+		rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000);
+		rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_AC, 0x10000);
+		rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000);
+
+		/* Turn Path B ADDA on */
+		rtl8xxxu_path_adda_on(priv, adda_regs, false);
+
+		rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000);
+		rtl8xxxu_write32(priv, REG_TX_IQK, 0x01007c00);
+		rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800);
+
+		for (i = 0; i < retry; i++) {
+			path_b_ok = rtl8192eu_iqk_path_b(priv);
+			if (path_b_ok == 0x01) {
+				val32 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_B);
+				result[t][4] = (val32 >> 16) & 0x3ff;
+				val32 = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_B);
+				result[t][5] = (val32 >> 16) & 0x3ff;
+				break;
+			}
+		}
+
+		if (!path_b_ok)
+			dev_dbg(dev, "%s: Path B IQK failed!\n", __func__);
+
+		for (i = 0; i < retry; i++) {
+			path_b_ok = rtl8192eu_rx_iqk_path_b(priv);
+			if (path_b_ok == 0x03) {
+				val32 = rtl8xxxu_read32(priv,
+							REG_RX_POWER_BEFORE_IQK_B_2);
+				result[t][6] = (val32 >> 16) & 0x3ff;
+				val32 = rtl8xxxu_read32(priv,
+							REG_RX_POWER_AFTER_IQK_B_2);
+				result[t][7] = (val32 >> 16) & 0x3ff;
+				break;
+			}
+		}
+
+		if (!path_b_ok)
+			dev_dbg(dev, "%s: Path B RX IQK failed!\n", __func__);
+	}
+
+	/* Back to BB mode, load original value */
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000);
+
+	if (t) {
+		/* Reload ADDA power saving parameters */
+		rtl8xxxu_restore_regs(priv, adda_regs, priv->adda_backup,
+				      RTL8XXXU_ADDA_REGS);
+
+		/* Reload MAC parameters */
+		rtl8xxxu_restore_mac_regs(priv, iqk_mac_regs, priv->mac_backup);
+
+		/* Reload BB parameters */
+		rtl8xxxu_restore_regs(priv, iqk_bb_regs,
+				      priv->bb_backup, RTL8XXXU_BB_REGS);
+
+		/* Restore RX initial gain */
+		val32 = rtl8xxxu_read32(priv, REG_OFDM0_XA_AGC_CORE1);
+		val32 &= 0xffffff00;
+		rtl8xxxu_write32(priv, REG_OFDM0_XA_AGC_CORE1, val32 | 0x50);
+		rtl8xxxu_write32(priv, REG_OFDM0_XA_AGC_CORE1, val32 | xa_agc);
+
+		if (priv->rf_paths > 1) {
+			val32 = rtl8xxxu_read32(priv, REG_OFDM0_XB_AGC_CORE1);
+			val32 &= 0xffffff00;
+			rtl8xxxu_write32(priv, REG_OFDM0_XB_AGC_CORE1,
+					 val32 | 0x50);
+			rtl8xxxu_write32(priv, REG_OFDM0_XB_AGC_CORE1,
+					 val32 | xb_agc);
+		}
+
+		/* Load 0xe30 IQC default value */
+		rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x01008c00);
+		rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x01008c00);
+	}
+}
+
+static void rtl8192eu_phy_iq_calibrate(struct rtl8xxxu_priv *priv)
+{
+	struct device *dev = &priv->udev->dev;
+	int result[4][8];	/* last is final result */
+	int i, candidate;
+	bool path_a_ok, path_b_ok;
+	u32 reg_e94, reg_e9c, reg_ea4, reg_eac;
+	u32 reg_eb4, reg_ebc, reg_ec4, reg_ecc;
+	bool simu;
+
+	memset(result, 0, sizeof(result));
+	candidate = -1;
+
+	path_a_ok = false;
+	path_b_ok = false;
+
+	for (i = 0; i < 3; i++) {
+		rtl8192eu_phy_iqcalibrate(priv, result, i);
+
+		if (i == 1) {
+			simu = rtl8xxxu_gen2_simularity_compare(priv,
+								result, 0, 1);
+			if (simu) {
+				candidate = 0;
+				break;
+			}
+		}
+
+		if (i == 2) {
+			simu = rtl8xxxu_gen2_simularity_compare(priv,
+								result, 0, 2);
+			if (simu) {
+				candidate = 0;
+				break;
+			}
+
+			simu = rtl8xxxu_gen2_simularity_compare(priv,
+								result, 1, 2);
+			if (simu)
+				candidate = 1;
+			else
+				candidate = 3;
+		}
+	}
+
+	for (i = 0; i < 4; i++) {
+		reg_e94 = result[i][0];
+		reg_e9c = result[i][1];
+		reg_ea4 = result[i][2];
+		reg_eb4 = result[i][4];
+		reg_ebc = result[i][5];
+		reg_ec4 = result[i][6];
+	}
+
+	if (candidate >= 0) {
+		reg_e94 = result[candidate][0];
+		priv->rege94 =  reg_e94;
+		reg_e9c = result[candidate][1];
+		priv->rege9c = reg_e9c;
+		reg_ea4 = result[candidate][2];
+		reg_eac = result[candidate][3];
+		reg_eb4 = result[candidate][4];
+		priv->regeb4 = reg_eb4;
+		reg_ebc = result[candidate][5];
+		priv->regebc = reg_ebc;
+		reg_ec4 = result[candidate][6];
+		reg_ecc = result[candidate][7];
+		dev_dbg(dev, "%s: candidate is %x\n", __func__, candidate);
+		dev_dbg(dev,
+			"%s: e94 =%x e9c=%x ea4=%x eac=%x eb4=%x ebc=%x ec4=%x ecc=%x\n",
+			__func__, reg_e94, reg_e9c,
+			reg_ea4, reg_eac, reg_eb4, reg_ebc, reg_ec4, reg_ecc);
+		path_a_ok = true;
+		path_b_ok = true;
+	} else {
+		reg_e94 = reg_eb4 = priv->rege94 = priv->regeb4 = 0x100;
+		reg_e9c = reg_ebc = priv->rege9c = priv->regebc = 0x0;
+	}
+
+	if (reg_e94 && candidate >= 0)
+		rtl8xxxu_fill_iqk_matrix_a(priv, path_a_ok, result,
+					   candidate, (reg_ea4 == 0));
+
+	if (priv->rf_paths > 1)
+		rtl8xxxu_fill_iqk_matrix_b(priv, path_b_ok, result,
+					   candidate, (reg_ec4 == 0));
+
+	rtl8xxxu_save_regs(priv, rtl8xxxu_iqk_phy_iq_bb_reg,
+			   priv->bb_recovery_backup, RTL8XXXU_BB_REGS);
+}
+
+/*
+ * This is needed for 8723bu as well, presumable
+ */
+static void rtl8192e_crystal_afe_adjust(struct rtl8xxxu_priv *priv)
+{
+	u8 val8;
+	u32 val32;
+
+	/*
+	 * 40Mhz crystal source, MAC 0x28[2]=0
+	 */
+	val8 = rtl8xxxu_read8(priv, REG_AFE_PLL_CTRL);
+	val8 &= 0xfb;
+	rtl8xxxu_write8(priv, REG_AFE_PLL_CTRL, val8);
+
+	val32 = rtl8xxxu_read32(priv, REG_AFE_CTRL4);
+	val32 &= 0xfffffc7f;
+	rtl8xxxu_write32(priv, REG_AFE_CTRL4, val32);
+
+	/*
+	 * 92e AFE parameter
+	 * AFE PLL KVCO selection, MAC 0x28[6]=1
+	 */
+	val8 = rtl8xxxu_read8(priv, REG_AFE_PLL_CTRL);
+	val8 &= 0xbf;
+	rtl8xxxu_write8(priv, REG_AFE_PLL_CTRL, val8);
+
+	/*
+	 * AFE PLL KVCO selection, MAC 0x78[21]=0
+	 */
+	val32 = rtl8xxxu_read32(priv, REG_AFE_CTRL4);
+	val32 &= 0xffdfffff;
+	rtl8xxxu_write32(priv, REG_AFE_CTRL4, val32);
+}
+
+static void rtl8192e_disabled_to_emu(struct rtl8xxxu_priv *priv)
+{
+	u8 val8;
+
+	/* Clear suspend enable and power down enable*/
+	val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
+	val8 &= ~(BIT(3) | BIT(4));
+	rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8);
+}
+
+static int rtl8192e_emu_to_active(struct rtl8xxxu_priv *priv)
+{
+	u8 val8;
+	u32 val32;
+	int count, ret = 0;
+
+	/* disable HWPDN 0x04[15]=0*/
+	val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
+	val8 &= ~BIT(7);
+	rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8);
+
+	/* disable SW LPS 0x04[10]= 0 */
+	val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
+	val8 &= ~BIT(2);
+	rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8);
+
+	/* disable WL suspend*/
+	val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
+	val8 &= ~(BIT(3) | BIT(4));
+	rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8);
+
+	/* wait till 0x04[17] = 1 power ready*/
+	for (count = RTL8XXXU_MAX_REG_POLL; count; count--) {
+		val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO);
+		if (val32 & BIT(17))
+			break;
+
+		udelay(10);
+	}
+
+	if (!count) {
+		ret = -EBUSY;
+		goto exit;
+	}
+
+	/* We should be able to optimize the following three entries into one */
+
+	/* release WLON reset 0x04[16]= 1*/
+	val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 2);
+	val8 |= BIT(0);
+	rtl8xxxu_write8(priv, REG_APS_FSMCO + 2, val8);
+
+	/* set, then poll until 0 */
+	val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO);
+	val32 |= APS_FSMCO_MAC_ENABLE;
+	rtl8xxxu_write32(priv, REG_APS_FSMCO, val32);
+
+	for (count = RTL8XXXU_MAX_REG_POLL; count; count--) {
+		val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO);
+		if ((val32 & APS_FSMCO_MAC_ENABLE) == 0) {
+			ret = 0;
+			break;
+		}
+		udelay(10);
+	}
+
+	if (!count) {
+		ret = -EBUSY;
+		goto exit;
+	}
+
+exit:
+	return ret;
+}
+
+static int rtl8192eu_active_to_lps(struct rtl8xxxu_priv *priv)
+{
+	struct device *dev = &priv->udev->dev;
+	u8 val8;
+	u16 val16;
+	u32 val32;
+	int retry, retval;
+
+	rtl8xxxu_write8(priv, REG_TXPAUSE, 0xff);
+
+	retry = 100;
+	retval = -EBUSY;
+	/*
+	 * Poll 32 bit wide 0x05f8 for 0x00000000 to ensure no TX is pending.
+	 */
+	do {
+		val32 = rtl8xxxu_read32(priv, REG_SCH_TX_CMD);
+		if (!val32) {
+			retval = 0;
+			break;
+		}
+	} while (retry--);
+
+	if (!retry) {
+		dev_warn(dev, "Failed to flush TX queue\n");
+		retval = -EBUSY;
+		goto out;
+	}
+
+	/* Disable CCK and OFDM, clock gated */
+	val8 = rtl8xxxu_read8(priv, REG_SYS_FUNC);
+	val8 &= ~SYS_FUNC_BBRSTB;
+	rtl8xxxu_write8(priv, REG_SYS_FUNC, val8);
+
+	udelay(2);
+
+	/* Reset whole BB */
+	val8 = rtl8xxxu_read8(priv, REG_SYS_FUNC);
+	val8 &= ~SYS_FUNC_BB_GLB_RSTN;
+	rtl8xxxu_write8(priv, REG_SYS_FUNC, val8);
+
+	/* Reset MAC TRX */
+	val16 = rtl8xxxu_read16(priv, REG_CR);
+	val16 &= 0xff00;
+	val16 |= (CR_HCI_TXDMA_ENABLE | CR_HCI_RXDMA_ENABLE);
+	rtl8xxxu_write16(priv, REG_CR, val16);
+
+	val16 = rtl8xxxu_read16(priv, REG_CR);
+	val16 &= ~CR_SECURITY_ENABLE;
+	rtl8xxxu_write16(priv, REG_CR, val16);
+
+	val8 = rtl8xxxu_read8(priv, REG_DUAL_TSF_RST);
+	val8 |= DUAL_TSF_TX_OK;
+	rtl8xxxu_write8(priv, REG_DUAL_TSF_RST, val8);
+
+out:
+	return retval;
+}
+
+static int rtl8192eu_active_to_emu(struct rtl8xxxu_priv *priv)
+{
+	u8 val8;
+	int count, ret = 0;
+
+	/* Turn off RF */
+	val8 = rtl8xxxu_read8(priv, REG_RF_CTRL);
+	val8 &= ~RF_ENABLE;
+	rtl8xxxu_write8(priv, REG_RF_CTRL, val8);
+
+	/* Switch DPDT_SEL_P output from register 0x65[2] */
+	val8 = rtl8xxxu_read8(priv, REG_LEDCFG2);
+	val8 &= ~LEDCFG2_DPDT_SELECT;
+	rtl8xxxu_write8(priv, REG_LEDCFG2, val8);
+
+	/* 0x0005[1] = 1 turn off MAC by HW state machine*/
+	val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
+	val8 |= BIT(1);
+	rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8);
+
+	for (count = RTL8XXXU_MAX_REG_POLL; count; count--) {
+		val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
+		if ((val8 & BIT(1)) == 0)
+			break;
+		udelay(10);
+	}
+
+	if (!count) {
+		dev_warn(&priv->udev->dev, "%s: Disabling MAC timed out\n",
+			 __func__);
+		ret = -EBUSY;
+		goto exit;
+	}
+
+exit:
+	return ret;
+}
+
+static int rtl8192eu_emu_to_disabled(struct rtl8xxxu_priv *priv)
+{
+	u8 val8;
+
+	/* 0x04[12:11] = 01 enable WL suspend */
+	val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
+	val8 &= ~(BIT(3) | BIT(4));
+	val8 |= BIT(3);
+	rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8);
+
+	return 0;
+}
+
+static int rtl8192eu_power_on(struct rtl8xxxu_priv *priv)
+{
+	u16 val16;
+	u32 val32;
+	int ret;
+
+	val32 = rtl8xxxu_read32(priv, REG_SYS_CFG);
+	if (val32 & SYS_CFG_SPS_LDO_SEL) {
+		rtl8xxxu_write8(priv, REG_LDO_SW_CTRL, 0xc3);
+	} else {
+		/*
+		 * Raise 1.2V voltage
+		 */
+		val32 = rtl8xxxu_read32(priv, REG_8192E_LDOV12_CTRL);
+		val32 &= 0xff0fffff;
+		val32 |= 0x00500000;
+		rtl8xxxu_write32(priv, REG_8192E_LDOV12_CTRL, val32);
+		rtl8xxxu_write8(priv, REG_LDO_SW_CTRL, 0x83);
+	}
+
+	/*
+	 * Adjust AFE before enabling PLL
+	 */
+	rtl8192e_crystal_afe_adjust(priv);
+	rtl8192e_disabled_to_emu(priv);
+
+	ret = rtl8192e_emu_to_active(priv);
+	if (ret)
+		goto exit;
+
+	rtl8xxxu_write16(priv, REG_CR, 0x0000);
+
+	/*
+	 * Enable MAC DMA/WMAC/SCHEDULE/SEC block
+	 * Set CR bit10 to enable 32k calibration.
+	 */
+	val16 = rtl8xxxu_read16(priv, REG_CR);
+	val16 |= (CR_HCI_TXDMA_ENABLE | CR_HCI_RXDMA_ENABLE |
+		  CR_TXDMA_ENABLE | CR_RXDMA_ENABLE |
+		  CR_PROTOCOL_ENABLE | CR_SCHEDULE_ENABLE |
+		  CR_MAC_TX_ENABLE | CR_MAC_RX_ENABLE |
+		  CR_SECURITY_ENABLE | CR_CALTIMER_ENABLE);
+	rtl8xxxu_write16(priv, REG_CR, val16);
+
+exit:
+	return ret;
+}
+
+static void rtl8192eu_power_off(struct rtl8xxxu_priv *priv)
+{
+	u8 val8;
+	u16 val16;
+
+	rtl8xxxu_flush_fifo(priv);
+
+	val8 = rtl8xxxu_read8(priv, REG_TX_REPORT_CTRL);
+	val8 &= ~TX_REPORT_CTRL_TIMER_ENABLE;
+	rtl8xxxu_write8(priv, REG_TX_REPORT_CTRL, val8);
+
+	/* Turn off RF */
+	rtl8xxxu_write8(priv, REG_RF_CTRL, 0x00);
+
+	rtl8192eu_active_to_lps(priv);
+
+	/* Reset Firmware if running in RAM */
+	if (rtl8xxxu_read8(priv, REG_MCU_FW_DL) & MCU_FW_RAM_SEL)
+		rtl8xxxu_firmware_self_reset(priv);
+
+	/* Reset MCU */
+	val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC);
+	val16 &= ~SYS_FUNC_CPU_ENABLE;
+	rtl8xxxu_write16(priv, REG_SYS_FUNC, val16);
+
+	/* Reset MCU ready status */
+	rtl8xxxu_write8(priv, REG_MCU_FW_DL, 0x00);
+
+	rtl8xxxu_reset_8051(priv);
+
+	rtl8192eu_active_to_emu(priv);
+	rtl8192eu_emu_to_disabled(priv);
+}
+
+static void rtl8192e_enable_rf(struct rtl8xxxu_priv *priv)
+{
+	u32 val32;
+	u8 val8;
+
+	val32 = rtl8xxxu_read32(priv, REG_RX_WAIT_CCA);
+	val32 |= (BIT(22) | BIT(23));
+	rtl8xxxu_write32(priv, REG_RX_WAIT_CCA, val32);
+
+	val8 = rtl8xxxu_read8(priv, REG_GPIO_MUXCFG);
+	val8 |= BIT(5);
+	rtl8xxxu_write8(priv, REG_GPIO_MUXCFG, val8);
+
+	/*
+	 * WLAN action by PTA
+	 */
+	rtl8xxxu_write8(priv, REG_WLAN_ACT_CONTROL_8723B, 0x04);
+
+	val32 = rtl8xxxu_read32(priv, REG_PWR_DATA);
+	val32 |= PWR_DATA_EEPRPAD_RFE_CTRL_EN;
+	rtl8xxxu_write32(priv, REG_PWR_DATA, val32);
+
+	val32 = rtl8xxxu_read32(priv, REG_RFE_BUFFER);
+	val32 |= (BIT(0) | BIT(1));
+	rtl8xxxu_write32(priv, REG_RFE_BUFFER, val32);
+
+	rtl8xxxu_write8(priv, REG_RFE_CTRL_ANTA_SRC, 0x77);
+
+	val32 = rtl8xxxu_read32(priv, REG_LEDCFG0);
+	val32 &= ~BIT(24);
+	val32 |= BIT(23);
+	rtl8xxxu_write32(priv, REG_LEDCFG0, val32);
+
+	/*
+	 * Fix external switch Main->S1, Aux->S0
+	 */
+	val8 = rtl8xxxu_read8(priv, REG_PAD_CTRL1);
+	val8 &= ~BIT(0);
+	rtl8xxxu_write8(priv, REG_PAD_CTRL1, val8);
+
+	/*
+	 * Fix transmission failure of rtl8192e.
+	 */
+	rtl8xxxu_write8(priv, REG_TXPAUSE, 0x00);
+}
+
+static s8 rtl8192e_cck_rssi(struct rtl8xxxu_priv *priv, struct rtl8723au_phy_stats *phy_stats)
+{
+	static const s8 lna_gain_table_0[8] = {15, 9, -10, -21, -23, -27, -43, -44};
+	static const s8 lna_gain_table_1[8] = {24, 18, 13, -4, -11, -18, -31, -36};
+
+	u8 cck_agc_rpt = phy_stats->cck_agc_rpt_ofdm_cfosho_a;
+	s8 rx_pwr_all = 0x00;
+	u8 vga_idx, lna_idx;
+	s8 lna_gain = 0;
+
+	lna_idx = u8_get_bits(cck_agc_rpt, CCK_AGC_RPT_LNA_IDX_MASK);
+	vga_idx = u8_get_bits(cck_agc_rpt, CCK_AGC_RPT_VGA_IDX_MASK);
+
+	if (priv->cck_agc_report_type == 0)
+		lna_gain = lna_gain_table_0[lna_idx];
+	else
+		lna_gain = lna_gain_table_1[lna_idx];
+
+	rx_pwr_all = lna_gain - (2 * vga_idx);
+
+	return rx_pwr_all;
+}
+
+static int rtl8192eu_led_brightness_set(struct led_classdev *led_cdev,
+					enum led_brightness brightness)
+{
+	struct rtl8xxxu_priv *priv = container_of(led_cdev,
+						  struct rtl8xxxu_priv,
+						  led_cdev);
+	u8 ledcfg = rtl8xxxu_read8(priv, REG_LEDCFG1);
+
+	if (brightness == LED_OFF) {
+		ledcfg &= ~LEDCFG1_HW_LED_CONTROL;
+		ledcfg |= LEDCFG1_LED_DISABLE;
+	} else if (brightness == LED_ON) {
+		ledcfg &= ~(LEDCFG1_HW_LED_CONTROL | LEDCFG1_LED_DISABLE);
+	} else if (brightness == RTL8XXXU_HW_LED_CONTROL) {
+		ledcfg &= ~LEDCFG1_LED_DISABLE;
+		ledcfg |= LEDCFG1_HW_LED_CONTROL;
+	}
+
+	rtl8xxxu_write8(priv, REG_LEDCFG1, ledcfg);
+
+	return 0;
+}
+
+struct rtl8xxxu_fileops rtl8192eu_fops = {
+	.identify_chip = rtl8192eu_identify_chip,
+	.parse_efuse = rtl8192eu_parse_efuse,
+	.load_firmware = rtl8192eu_load_firmware,
+	.power_on = rtl8192eu_power_on,
+	.power_off = rtl8192eu_power_off,
+	.read_efuse = rtl8xxxu_read_efuse,
+	.reset_8051 = rtl8xxxu_reset_8051,
+	.llt_init = rtl8xxxu_auto_llt_table,
+	.init_phy_bb = rtl8192eu_init_phy_bb,
+	.init_phy_rf = rtl8192eu_init_phy_rf,
+	.phy_lc_calibrate = rtl8723a_phy_lc_calibrate,
+	.phy_iq_calibrate = rtl8192eu_phy_iq_calibrate,
+	.config_channel = rtl8xxxu_gen2_config_channel,
+	.parse_rx_desc = rtl8xxxu_parse_rxdesc24,
+	.parse_phystats = rtl8723au_rx_parse_phystats,
+	.enable_rf = rtl8192e_enable_rf,
+	.disable_rf = rtl8xxxu_gen2_disable_rf,
+	.usb_quirks = rtl8xxxu_gen2_usb_quirks,
+	.set_tx_power = rtl8192e_set_tx_power,
+	.update_rate_mask = rtl8xxxu_gen2_update_rate_mask,
+	.report_connect = rtl8xxxu_gen2_report_connect,
+	.report_rssi = rtl8xxxu_gen2_report_rssi,
+	.fill_txdesc = rtl8xxxu_fill_txdesc_v2,
+	.set_crystal_cap = rtl8723a_set_crystal_cap,
+	.cck_rssi = rtl8192e_cck_rssi,
+	.led_classdev_brightness_set = rtl8192eu_led_brightness_set,
+	.writeN_block_size = 128,
+	.tx_desc_size = sizeof(struct rtl8xxxu_txdesc40),
+	.rx_desc_size = sizeof(struct rtl8xxxu_rxdesc24),
+	.has_s0s1 = 0,
+	.gen2_thermal_meter = 1,
+	.needs_full_init = 1,
+	.supports_ap = 1,
+	.max_macid_num = 128,
+	.adda_1t_init = 0x0fc01616,
+	.adda_1t_path_on = 0x0fc01616,
+	.adda_2t_path_on_a = 0x0fc01616,
+	.adda_2t_path_on_b = 0x0fc01616,
+	.trxff_boundary = 0x3cff,
+	.mactable = rtl8192e_mac_init_table,
+	.total_page_num = TX_TOTAL_PAGE_NUM_8192E,
+	.page_num_hi = TX_PAGE_NUM_HI_PQ_8192E,
+	.page_num_lo = TX_PAGE_NUM_LO_PQ_8192E,
+	.page_num_norm = TX_PAGE_NUM_NORM_PQ_8192E,
+};
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192f.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192f.c
new file mode 100644
index 0000000000..28e93835e0
--- /dev/null
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192f.c
@@ -0,0 +1,2092 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * RTL8XXXU mac80211 USB driver - 8192fu specific subdriver
+ *
+ * Copyright (c) 2023 Bitterblue Smith <rtl8821cerfe2@gmail.com>
+ *
+ * Portions copied from existing rtl8xxxu code:
+ * Copyright (c) 2014 - 2017 Jes Sorensen <Jes.Sorensen@gmail.com>
+ *
+ * Portions, notably calibration code:
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <linux/usb.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/wireless.h>
+#include <linux/firmware.h>
+#include <linux/moduleparam.h>
+#include <net/mac80211.h>
+#include "rtl8xxxu.h"
+#include "rtl8xxxu_regs.h"
+
+static const struct rtl8xxxu_reg8val rtl8192f_mac_init_table[] = {
+	{0x420, 0x00},	{0x422, 0x78},	{0x428, 0x0a},	{0x429, 0x10},
+	{0x430, 0x00},	{0x431, 0x00},	{0x432, 0x00},	{0x433, 0x01},
+	{0x434, 0x04},	{0x435, 0x05},	{0x436, 0x07},	{0x437, 0x08},
+	{0x43c, 0x04},	{0x43d, 0x05},	{0x43e, 0x07},	{0x43f, 0x08},
+	{0x440, 0x5d},	{0x441, 0x01},	{0x442, 0x00},	{0x444, 0x10},
+	{0x445, 0xf0},	{0x446, 0x0e},	{0x447, 0x1f},	{0x448, 0x00},
+	{0x449, 0x00},	{0x44a, 0x00},	{0x44b, 0x00},	{0x44c, 0x10},
+	{0x44d, 0xf0},	{0x44e, 0x0e},	{0x44f, 0x00},	{0x450, 0x00},
+	{0x451, 0x00},	{0x452, 0x00},	{0x453, 0x00},	{0x480, 0x20},
+	{0x49c, 0x30},	{0x49d, 0xf0},	{0x49e, 0x03},	{0x49f, 0x3e},
+	{0x4a0, 0x00},	{0x4a1, 0x00},	{0x4a2, 0x00},	{0x4a3, 0x00},
+	{0x4a4, 0x15},	{0x4a5, 0xf0},	{0x4a6, 0x01},	{0x4a7, 0x0e},
+	{0x4a8, 0xe0},	{0x4a9, 0x00},	{0x4aa, 0x00},	{0x4ab, 0x00},
+	{0x2448, 0x06},	{0x244a, 0x06},	{0x244c, 0x06},	{0x244e, 0x06},
+	{0x4c7, 0x80},	{0x4c8, 0xff},	{0x4c9, 0x08},	{0x4ca, 0x3c},
+	{0x4cb, 0x3c},	{0x4cc, 0xff},	{0x4cd, 0xff},	{0x4ce, 0x01},
+	{0x500, 0x26},	{0x501, 0xa2},	{0x502, 0x2f},	{0x503, 0x00},
+	{0x504, 0x28},	{0x505, 0xa3},	{0x506, 0x5e},	{0x507, 0x00},
+	{0x508, 0x2b},	{0x509, 0xa4},	{0x50a, 0x5e},	{0x50b, 0x00},
+	{0x50c, 0x4f},	{0x50d, 0xa4},	{0x50e, 0x00},	{0x50f, 0x00},
+	{0x512, 0x1c},	{0x514, 0x0a},	{0x516, 0x0a},	{0x521, 0x2f},
+	{0x525, 0x0f},	{0x550, 0x10},	{0x551, 0x10},	{0x559, 0x02},
+	{0x55c, 0x50},	{0x55d, 0xff},	{0x605, 0x30},	{0x608, 0x0e},
+	{0x609, 0x2a},	{0x60c, 0x18},	{0x620, 0xff},	{0x621, 0xff},
+	{0x622, 0xff},	{0x623, 0xff},	{0x624, 0xff},	{0x625, 0xff},
+	{0x626, 0xff},	{0x627, 0xff},	{0x638, 0x50},	{0x63c, 0x0a},
+	{0x63d, 0x0a},	{0x63e, 0x0e},	{0x63f, 0x0e},	{0x640, 0x40},
+	{0x642, 0x40},	{0x643, 0x00},	{0x652, 0xc8},	{0x66e, 0x05},
+	{0x6a0, 0xff},	{0x6a1, 0xff},	{0x6a2, 0xff},	{0x6a3, 0xff},
+	{0x6a4, 0xff},	{0x6a5, 0xff},	{0x6de, 0x84},	{0x700, 0x21},
+	{0x701, 0x43},	{0x702, 0x65},	{0x703, 0x87},	{0x708, 0x21},
+	{0x709, 0x43},	{0x70a, 0x65},	{0x70b, 0x87},	{0x718, 0x40},
+	{0x7c0, 0x38},	{0x7c2, 0x0f},	{0x7c3, 0xc0},	{0x073, 0x04},
+	{0x7c4, 0x77},	{0x024, 0xc7},	{0x7ec, 0xff},	{0x7ed, 0xff},
+	{0x7ee, 0xff},	{0x7ef, 0xff},
+	{0xffff, 0xff},
+};
+
+/* If updating the phy init table, also update rtl8192f_revise_cck_tx_psf(). */
+static const struct rtl8xxxu_reg32val rtl8192fu_phy_init_table[] = {
+	{0x800, 0x80006C00},	{0x804, 0x00004001},
+	{0x808, 0x0000FC00},	{0x80C, 0x00000000},
+	{0x810, 0x20200322},	{0x814, 0x020C3910},
+	{0x818, 0x00000385},	{0x81C, 0x07000000},
+	{0x820, 0x01000100},	{0x824, 0x00390204},
+	{0x828, 0x01000100},	{0x82C, 0x00390204},
+	{0x830, 0x25252525},	{0x834, 0x25252525},
+	{0x838, 0x25252525},	{0x83C, 0x25252525},
+	{0x840, 0x00010000},	{0x844, 0x00010000},
+	{0x848, 0x25252525},	{0x84C, 0x25252525},
+	{0x850, 0x00031FE0},	{0x854, 0x00000000},
+	{0x858, 0x569A569A},	{0x85C, 0x00400040},
+	{0x860, 0x66F60000},	{0x864, 0x061F0000},
+	{0x868, 0x25252525},	{0x86C, 0x25252525},
+	{0x870, 0x00000300},	{0x874, 0x04003400},
+	{0x878, 0x08080808},	{0x87C, 0x004F0201},
+	{0x880, 0xD8001402},	{0x884, 0xC0000120},
+	{0x888, 0x00000000},	{0x88C, 0xCC0000C0},
+	{0x890, 0x00000000},	{0x894, 0xFFFFFFFE},
+	{0x898, 0x40302010},	{0x89C, 0x00706050},
+	{0x900, 0x00000000},	{0x904, 0x00000023},
+	{0x908, 0x00000F00},	{0x90C, 0x81121313},
+	{0x910, 0x024C0000},	{0x914, 0x00000000},
+	{0x918, 0x00000000},	{0x91C, 0x00000000},
+	{0x920, 0x00000000},	{0x924, 0x00000000},
+	{0x928, 0x00000000},	{0x92C, 0x00000000},
+	{0x930, 0x88000000},	{0x934, 0x00000245},
+	{0x938, 0x00024588},	{0x93C, 0x00000000},
+	{0x940, 0x000007FF},	{0x944, 0x3F3F0000},
+	{0x948, 0x000001A3},	{0x94C, 0x20200008},
+	{0x950, 0x00338A98},	{0x954, 0x00000000},
+	{0x958, 0xCBCAD87A},	{0x95C, 0x06EB5735},
+	{0x960, 0x00000000},	{0x964, 0x00000000},
+	{0x968, 0x00000000},	{0x96C, 0x00000003},
+	{0x970, 0x00000000},	{0x974, 0x00000000},
+	{0x978, 0x00000000},	{0x97C, 0x10030000},
+	{0x980, 0x00000000},	{0x984, 0x02800280},
+	{0x988, 0x020A5704},	{0x98C, 0x1461C826},
+	{0x990, 0x0001469E},	{0x994, 0x008858D1},
+	{0x998, 0x400086C9},	{0x99C, 0x44444242},
+	{0x9A0, 0x00000000},	{0x9A4, 0x00000000},
+	{0x9A8, 0x00000000},	{0x9AC, 0xC0000000},
+	{0xA00, 0x00D047C8},	{0xA04, 0xC1FF0008},
+	{0xA08, 0x88838300},	{0xA0C, 0x2E20100F},
+	{0xA10, 0x9500BB78},	{0xA14, 0x11144028},
+	{0xA18, 0x00881117},	{0xA1C, 0x89140F00},
+	{0xA20, 0xE82C0001},	{0xA24, 0x64B80C1C},
+	{0xA28, 0x00158810},	{0xA2C, 0x10BB8000},
+	{0xA70, 0x00008000},	{0xA74, 0x80800100},
+	{0xA78, 0x000089F0},	{0xA7C, 0x225B0606},
+	{0xA80, 0x20803210},	{0xA84, 0x00200200},
+	{0xA88, 0x00000000},	{0xA8C, 0x00000000},
+	{0xA90, 0x00000000},	{0xA94, 0x00000000},
+	{0xA98, 0x00000000},	{0xA9C, 0x00460000},
+	{0xAA0, 0x00000000},	{0xAA4, 0x00020014},
+	{0xAA8, 0xBA0A0008},	{0xAAC, 0x01235667},
+	{0xAB0, 0x00000000},	{0xAB4, 0x00201402},
+	{0xAB8, 0x0000001C},	{0xABC, 0x0000F7FF},
+	{0xAC0, 0xD4C0A742},	{0xAC4, 0x00000000},
+	{0xAC8, 0x00000F08},	{0xACC, 0x00000F07},
+	{0xAD0, 0xA1052A10},	{0xAD4, 0x0D9D8452},
+	{0xAD8, 0x9E024024},	{0xADC, 0x0023C001},
+	{0xAE0, 0x00000391},	{0xB2C, 0x00000000},
+	{0xC00, 0x00000080},	{0xC04, 0x6F005433},
+	{0xC08, 0x000004E4},	{0xC0C, 0x6C6C6C6C},
+	{0xC10, 0x22000000},	{0xC14, 0x40000100},
+	{0xC18, 0x22000000},	{0xC1C, 0x40000100},
+	{0xC20, 0x00000000},	{0xC24, 0x40000100},
+	{0xC28, 0x00000000},	{0xC2C, 0x40000100},
+	{0xC30, 0x0401E809},	{0xC34, 0x30000020},
+	{0xC38, 0x23808080},	{0xC3C, 0x00002F44},
+	{0xC40, 0x1CF8403F},	{0xC44, 0x000100C7},
+	{0xC48, 0xEC060106},	{0xC4C, 0x007F037F},
+	{0xC50, 0x00E48020},	{0xC54, 0x04008017},
+	{0xC58, 0x00000020},	{0xC5C, 0x00708492},
+	{0xC60, 0x09280200},	{0xC64, 0x5014838B},
+	{0xC68, 0x47C006C7},	{0xC6C, 0x00000035},
+	{0xC70, 0x00001007},	{0xC74, 0x02815269},
+	{0xC78, 0x0FE07F1F},	{0xC7C, 0x00B91612},
+	{0xC80, 0x40000100},	{0xC84, 0x32000000},
+	{0xC88, 0x40000100},	{0xC8C, 0xA0240000},
+	{0xC90, 0x400E161E},	{0xC94, 0x00000F00},
+	{0xC98, 0x400E161E},	{0xC9C, 0x0000BDC8},
+	{0xCA0, 0x00000000},	{0xCA4, 0x098300A0},
+	{0xCA8, 0x00006B00},	{0xCAC, 0x87F45B1A},
+	{0xCB0, 0x0000002D},	{0xCB4, 0x00000000},
+	{0xCB8, 0x00000000},	{0xCBC, 0x28100200},
+	{0xCC0, 0x0010A3D0},	{0xCC4, 0x00000F7D},
+	{0xCC8, 0x00000000},	{0xCCC, 0x00000000},
+	{0xCD0, 0x593659AD},	{0xCD4, 0xB7545121},
+	{0xCD8, 0x64B22427},	{0xCDC, 0x00766932},
+	{0xCE0, 0x40201000},	{0xCE4, 0x00000000},
+	{0xCE8, 0x40E04407},	{0xCEC, 0x2E572000},
+	{0xD00, 0x000D8780},	{0xD04, 0x40020403},
+	{0xD08, 0x0002907F},	{0xD0C, 0x20010201},
+	{0xD10, 0x06288888},	{0xD14, 0x8888367B},
+	{0xD18, 0x7D806DB3},	{0xD1C, 0x0000007F},
+	{0xD20, 0x567600B8},	{0xD24, 0x0000018B},
+	{0xD28, 0xD513FF7D},	{0xD2C, 0xCC979975},
+	{0xD30, 0x04928000},	{0xD34, 0x40608000},
+	{0xD38, 0x88DDA000},	{0xD3C, 0x00026EE2},
+	{0xD50, 0x67270001},	{0xD54, 0x20500000},
+	{0xD58, 0x16161616},	{0xD5C, 0x71F20064},
+	{0xD60, 0x4653DA60},	{0xD64, 0x3E718A3C},
+	{0xD68, 0x00000183},	{0xD7C, 0x00000000},
+	{0xD80, 0x50000000},	{0xD84, 0x31310400},
+	{0xD88, 0xF5B50000},	{0xD8C, 0x00000000},
+	{0xD90, 0x00000000},	{0xD94, 0x44BBBB44},
+	{0xD98, 0x44BB44FF},	{0xD9C, 0x06033688},
+	{0xE00, 0x25252525},	{0xE04, 0x25252525},
+	{0xE08, 0x25252525},	{0xE10, 0x25252525},
+	{0xE14, 0x25252525},	{0xE18, 0x25252525},
+	{0xE1C, 0x25252525},	{0xE20, 0x00000000},
+	{0xE24, 0x00200000},	{0xE28, 0x00000000},
+	{0xE2C, 0x00000000},	{0xE30, 0x01007C00},
+	{0xE34, 0x01004800},	{0xE38, 0x10008C0F},
+	{0xE3C, 0x3C008C0F},	{0xE40, 0x01007C00},
+	{0xE44, 0x00000000},	{0xE48, 0x00000000},
+	{0xE4C, 0x00000000},	{0xE50, 0x01007C00},
+	{0xE54, 0x01004800},	{0xE58, 0x10008C0F},
+	{0xE5C, 0x3C008C0F},	{0xE60, 0x02100000},
+	{0xE64, 0xBBBBBBBB},	{0xE68, 0x40404040},
+	{0xE6C, 0x80408040},	{0xE70, 0x80408040},
+	{0xE74, 0x40404040},	{0xE78, 0x00400040},
+	{0xE7C, 0x40404040},	{0xE80, 0x00FF0000},
+	{0xE84, 0x80408040},	{0xE88, 0x40404040},
+	{0xE8C, 0x80408040},	{0xED0, 0x80408040},
+	{0xED4, 0x80408040},	{0xED8, 0x80408040},
+	{0xEDC, 0xC040C040},	{0xEE0, 0xC040C040},
+	{0xEE4, 0x00400040},	{0xEE8, 0xD8001402},
+	{0xEEC, 0xC0000120},	{0xEF0, 0x02000B09},
+	{0xEF4, 0x00000001},	{0xEF8, 0x00000000},
+	{0xF00, 0x00000300},	{0xF04, 0x00000002},
+	{0xF08, 0x00007D0C},	{0xF0C, 0x0000A907},
+	{0xF10, 0x00005807},	{0xF14, 0x00000003},
+	{0xF18, 0x07D003E8},	{0xF1C, 0x8000001F},
+	{0xF20, 0x00000000},	{0xF24, 0x00000000},
+	{0xF28, 0x00000000},	{0xF2C, 0x00000000},
+	{0xF30, 0x00000000},	{0xF34, 0x00000000},
+	{0xF38, 0x00030055},	{0xF3C, 0x0000003A},
+	{0xF40, 0x00000002},	{0xF44, 0x00000000},
+	{0xF48, 0x00000000},	{0xF4C, 0x0B000000},
+	{0xF50, 0x00000000},
+	{0xffff, 0xffffffff},
+};
+
+static const struct rtl8xxxu_reg32val rtl8192f_agc_table[] = {
+	{0xC78, 0x0FA0001F}, {0xC78, 0x0FA0011F},
+	{0xC78, 0x0FA0021F}, {0xC78, 0x0FA0031F},
+	{0xC78, 0x0FA0041F}, {0xC78, 0x0FA0051F},
+	{0xC78, 0x0F90061F}, {0xC78, 0x0F80071F},
+	{0xC78, 0x0F70081F}, {0xC78, 0x0F60091F},
+	{0xC78, 0x0F500A1F}, {0xC78, 0x0F400B1F},
+	{0xC78, 0x0F300C1F}, {0xC78, 0x0F200D1F},
+	{0xC78, 0x0F100E1F}, {0xC78, 0x0F000F1F},
+	{0xC78, 0x0EF0101F}, {0xC78, 0x0EE0111F},
+	{0xC78, 0x0ED0121F}, {0xC78, 0x0EC0131F},
+	{0xC78, 0x0EB0141F}, {0xC78, 0x0EA0151F},
+	{0xC78, 0x0E90161F}, {0xC78, 0x0E80171F},
+	{0xC78, 0x0E70181F}, {0xC78, 0x0E60191F},
+	{0xC78, 0x0E501A1F}, {0xC78, 0x0E401B1F},
+	{0xC78, 0x0E301C1F}, {0xC78, 0x0C701D1F},
+	{0xC78, 0x0C601E1F}, {0xC78, 0x0C501F1F},
+	{0xC78, 0x0C40201F}, {0xC78, 0x0C30211F},
+	{0xC78, 0x0A60221F}, {0xC78, 0x0A50231F},
+	{0xC78, 0x0A40241F}, {0xC78, 0x0A30251F},
+	{0xC78, 0x0860261F}, {0xC78, 0x0850271F},
+	{0xC78, 0x0840281F}, {0xC78, 0x0830291F},
+	{0xC78, 0x06702A1F}, {0xC78, 0x06602B1F},
+	{0xC78, 0x06502C1F}, {0xC78, 0x06402D1F},
+	{0xC78, 0x06302E1F}, {0xC78, 0x04602F1F},
+	{0xC78, 0x0450301F}, {0xC78, 0x0440311F},
+	{0xC78, 0x0430321F}, {0xC78, 0x0260331F},
+	{0xC78, 0x0250341F}, {0xC78, 0x0240351F},
+	{0xC78, 0x0230361F}, {0xC78, 0x0050371F},
+	{0xC78, 0x0040381F}, {0xC78, 0x0030391F},
+	{0xC78, 0x00203A1F}, {0xC78, 0x00103B1F},
+	{0xC78, 0x00003C1F}, {0xC78, 0x00003D1F},
+	{0xC78, 0x00003E1F}, {0xC78, 0x00003F1F},
+
+	{0xC78, 0x0FA0401F}, {0xC78, 0x0FA0411F},
+	{0xC78, 0x0FA0421F}, {0xC78, 0x0FA0431F},
+	{0xC78, 0x0F90441F}, {0xC78, 0x0F80451F},
+	{0xC78, 0x0F70461F}, {0xC78, 0x0F60471F},
+	{0xC78, 0x0F50481F}, {0xC78, 0x0F40491F},
+	{0xC78, 0x0F304A1F}, {0xC78, 0x0F204B1F},
+	{0xC78, 0x0F104C1F}, {0xC78, 0x0F004D1F},
+	{0xC78, 0x0EF04E1F}, {0xC78, 0x0EE04F1F},
+	{0xC78, 0x0ED0501F}, {0xC78, 0x0EC0511F},
+	{0xC78, 0x0EB0521F}, {0xC78, 0x0EA0531F},
+	{0xC78, 0x0E90541F}, {0xC78, 0x0E80551F},
+	{0xC78, 0x0E70561F}, {0xC78, 0x0E60571F},
+	{0xC78, 0x0E50581F}, {0xC78, 0x0E40591F},
+	{0xC78, 0x0E305A1F}, {0xC78, 0x0E205B1F},
+	{0xC78, 0x0E105C1F}, {0xC78, 0x0C505D1F},
+	{0xC78, 0x0C405E1F}, {0xC78, 0x0C305F1F},
+	{0xC78, 0x0C20601F}, {0xC78, 0x0C10611F},
+	{0xC78, 0x0A40621F}, {0xC78, 0x0A30631F},
+	{0xC78, 0x0A20641F}, {0xC78, 0x0A10651F},
+	{0xC78, 0x0840661F}, {0xC78, 0x0830671F},
+	{0xC78, 0x0820681F}, {0xC78, 0x0810691F},
+	{0xC78, 0x06506A1F}, {0xC78, 0x06406B1F},
+	{0xC78, 0x06306C1F}, {0xC78, 0x06206D1F},
+	{0xC78, 0x06106E1F}, {0xC78, 0x04406F1F},
+	{0xC78, 0x0430701F}, {0xC78, 0x0420711F},
+	{0xC78, 0x0410721F}, {0xC78, 0x0240731F},
+	{0xC78, 0x0230741F}, {0xC78, 0x0220751F},
+	{0xC78, 0x0210761F}, {0xC78, 0x0030771F},
+	{0xC78, 0x0020781F}, {0xC78, 0x0010791F},
+	{0xC78, 0x00007A1F}, {0xC78, 0x00007B1F},
+	{0xC78, 0x00007C1F}, {0xC78, 0x00007D1F},
+	{0xC78, 0x00007E1F}, {0xC78, 0x00007F1F},
+
+	{0xC78, 0x0FA0801F}, {0xC78, 0x0FA0811F},
+	{0xC78, 0x0FA0821F}, {0xC78, 0x0FA0831F},
+	{0xC78, 0x0FA0841F}, {0xC78, 0x0FA0851F},
+	{0xC78, 0x0F90861F}, {0xC78, 0x0F80871F},
+	{0xC78, 0x0F70881F}, {0xC78, 0x0F60891F},
+	{0xC78, 0x0F508A1F}, {0xC78, 0x0F408B1F},
+	{0xC78, 0x0F308C1F}, {0xC78, 0x0F208D1F},
+	{0xC78, 0x0F108E1F}, {0xC78, 0x0B908F1F},
+	{0xC78, 0x0B80901F}, {0xC78, 0x0B70911F},
+	{0xC78, 0x0B60921F}, {0xC78, 0x0B50931F},
+	{0xC78, 0x0B40941F}, {0xC78, 0x0B30951F},
+	{0xC78, 0x0B20961F}, {0xC78, 0x0B10971F},
+	{0xC78, 0x0B00981F}, {0xC78, 0x0AF0991F},
+	{0xC78, 0x0AE09A1F}, {0xC78, 0x0AD09B1F},
+	{0xC78, 0x0AC09C1F}, {0xC78, 0x0AB09D1F},
+	{0xC78, 0x0AA09E1F}, {0xC78, 0x0A909F1F},
+	{0xC78, 0x0A80A01F}, {0xC78, 0x0A70A11F},
+	{0xC78, 0x0A60A21F}, {0xC78, 0x0A50A31F},
+	{0xC78, 0x0A40A41F}, {0xC78, 0x0A30A51F},
+	{0xC78, 0x0A20A61F}, {0xC78, 0x0A10A71F},
+	{0xC78, 0x0A00A81F}, {0xC78, 0x0830A91F},
+	{0xC78, 0x0820AA1F}, {0xC78, 0x0810AB1F},
+	{0xC78, 0x0800AC1F}, {0xC78, 0x0640AD1F},
+	{0xC78, 0x0630AE1F}, {0xC78, 0x0620AF1F},
+	{0xC78, 0x0610B01F}, {0xC78, 0x0600B11F},
+	{0xC78, 0x0430B21F}, {0xC78, 0x0420B31F},
+	{0xC78, 0x0410B41F}, {0xC78, 0x0400B51F},
+	{0xC78, 0x0230B61F}, {0xC78, 0x0220B71F},
+	{0xC78, 0x0210B81F}, {0xC78, 0x0200B91F},
+	{0xC78, 0x0000BA1F}, {0xC78, 0x0000BB1F},
+	{0xC78, 0x0000BC1F}, {0xC78, 0x0000BD1F},
+	{0xC78, 0x0000BE1F}, {0xC78, 0x0000BF1F},
+	{0xC50, 0x00E48024}, {0xC50, 0x00E48020},
+	{0xffff, 0xffffffff}
+};
+
+static const struct rtl8xxxu_rfregval rtl8192fu_radioa_init_table[] = {
+	{0x00, 0x30000}, {0x18, 0x0FC07}, {0x81, 0x0FC00}, {0x82, 0x003C0},
+	{0x84, 0x00005}, {0x86, 0xA33A5}, {0x87, 0x00000}, {0x88, 0x58010},
+	{0x8E, 0x64540}, {0x8F, 0x282D8}, {0x51, 0x02C06}, {0x52, 0x7A007},
+	{0x53, 0x10061}, {0x54, 0x60018}, {0x55, 0x82020}, {0x56, 0x08CC6},
+	{0x57, 0x2CC00}, {0x58, 0x00000}, {0x5A, 0x50000}, {0x5B, 0x00006},
+	{0x5C, 0x00015}, {0x65, 0x20000}, {0x6E, 0x38319}, {0xF5, 0x43180},
+	{0xEF, 0x00002}, {0x33, 0x00301}, {0x33, 0x1032A}, {0x33, 0x2032A},
+	{0xEF, 0x00000}, {0xDF, 0x00002}, {0x35, 0x00000}, {0xF0, 0x08008},
+	{0xEF, 0x00800}, {0x33, 0x0040E}, {0x33, 0x04845}, {0x33, 0x08848},
+	{0x33, 0x0C84B}, {0x33, 0x1088A}, {0x33, 0x14C50}, {0x33, 0x18C8E},
+	{0x33, 0x1CCCD}, {0x33, 0x20CD0}, {0x33, 0x24CD3}, {0x33, 0x28CD6},
+	{0x33, 0x4002B}, {0x33, 0x4402E}, {0x33, 0x48846}, {0x33, 0x4C849},
+	{0x33, 0x50888}, {0x33, 0x54CC6}, {0x33, 0x58CC9}, {0x33, 0x5CCCC},
+	{0x33, 0x60CCF}, {0x33, 0x64CD2}, {0x33, 0x68CD5}, {0xEF, 0x00000},
+	{0xEF, 0x00400}, {0x33, 0x01C23}, {0x33, 0x05C23}, {0x33, 0x09D23},
+	{0x33, 0x0DD23}, {0x33, 0x11FA3}, {0x33, 0x15FA3}, {0x33, 0x19FAB},
+	{0x33, 0x1DFAB}, {0xEF, 0x00000}, {0xEF, 0x00200}, {0x33, 0x00030},
+	{0x33, 0x04030}, {0x33, 0x08030}, {0x33, 0x0C030}, {0x33, 0x10030},
+	{0x33, 0x14030}, {0x33, 0x18030}, {0x33, 0x1C030}, {0x33, 0x20030},
+	{0x33, 0x24030}, {0x33, 0x28030}, {0x33, 0x2C030}, {0x33, 0x30030},
+	{0x33, 0x34030}, {0x33, 0x38030}, {0x33, 0x3C030}, {0xEF, 0x00000},
+	{0xEF, 0x00100}, {0x33, 0x44001}, {0x33, 0x48001}, {0x33, 0x4C001},
+	{0x33, 0x50001}, {0x33, 0x54001}, {0x33, 0x58001}, {0x33, 0x5C001},
+	{0x33, 0x60001}, {0x33, 0x64001}, {0x33, 0x68001}, {0x33, 0x6C001},
+	{0x33, 0x70001}, {0x33, 0x74001}, {0x33, 0x78001}, {0x33, 0x04000},
+	{0x33, 0x08000}, {0x33, 0x0C000}, {0x33, 0x10000}, {0x33, 0x14000},
+	{0x33, 0x18001}, {0x33, 0x1C002}, {0x33, 0x20002}, {0x33, 0x24002},
+	{0x33, 0x28002}, {0x33, 0x2C002}, {0x33, 0x30002}, {0x33, 0x34002},
+	{0x33, 0x38002}, {0xEF, 0x00000}, {0x84, 0x00000}, {0xEF, 0x80010},
+	{0x30, 0x20000}, {0x31, 0x0006F}, {0x32, 0x01FF7}, {0xEF, 0x00000},
+	{0x84, 0x00000}, {0xEF, 0x80000}, {0x30, 0x30000}, {0x31, 0x0006F},
+	{0x32, 0xF1DF3}, {0xEF, 0x00000}, {0x84, 0x00000}, {0xEF, 0x80000},
+	{0x30, 0x38000}, {0x31, 0x0006F}, {0x32, 0xF1FF2}, {0xEF, 0x00000},
+	{0x1B, 0x746CE}, {0xEF, 0x20000}, {0x33, 0x30000}, {0x33, 0x38000},
+	{0x33, 0x70000}, {0x33, 0x78000}, {0xEF, 0x00000}, {0xDF, 0x08000},
+	{0xB0, 0xFFBCB}, {0xB3, 0x06000}, {0xB7, 0x18DF0}, {0xB8, 0x38FF0},
+	{0xC9, 0x00600}, {0xDF, 0x00000}, {0xB1, 0x33B8F}, {0xB2, 0x33762},
+	{0xB4, 0x141F0}, {0xB5, 0x14080}, {0xB6, 0x12425}, {0xB9, 0xC0008},
+	{0xBA, 0x40005}, {0xC2, 0x02C01}, {0xC3, 0x0000B}, {0xC4, 0x81E2F},
+	{0xC5, 0x5C28F}, {0xC6, 0x000A0}, {0xCA, 0x02000}, {0xFE, 0x00000},
+	{0x18, 0x08C07}, {0xFE, 0x00000}, {0xFE, 0x00000}, {0xFE, 0x00000},
+	{0x00, 0x31DD5},
+	{0xff, 0xffffffff}
+};
+
+static const struct rtl8xxxu_rfregval rtl8192fu_radiob_init_table[] = {
+	{0x00, 0x30000}, {0x81, 0x0FC00}, {0x82, 0x003C0}, {0x84, 0x00005},
+	{0x86, 0xA33A5}, {0x87, 0x00000}, {0x88, 0x58010}, {0x8E, 0x64540},
+	{0x8F, 0x282D8}, {0x51, 0x02C06}, {0x52, 0x7A007}, {0x53, 0x10061},
+	{0x54, 0x60018}, {0x55, 0x82020}, {0x56, 0x08CC6}, {0x57, 0x2CC00},
+	{0x58, 0x00000}, {0x5A, 0x50000}, {0x5B, 0x00006}, {0x5C, 0x00015},
+	{0x65, 0x20000}, {0x6E, 0x38319}, {0xF5, 0x43180}, {0xEF, 0x00002},
+	{0x33, 0x00301}, {0x33, 0x1032A}, {0x33, 0x2032A}, {0xEF, 0x00000},
+	{0xDF, 0x00002}, {0x35, 0x00000}, {0xF0, 0x08008}, {0xEF, 0x00800},
+	{0x33, 0x0040E}, {0x33, 0x04845}, {0x33, 0x08848}, {0x33, 0x0C84B},
+	{0x33, 0x1088A}, {0x33, 0x14CC8}, {0x33, 0x18CCB}, {0x33, 0x1CCCE},
+	{0x33, 0x20CD1}, {0x33, 0x24CD4}, {0x33, 0x28CD7}, {0x33, 0x4002B},
+	{0x33, 0x4402E}, {0x33, 0x48846}, {0x33, 0x4C849}, {0x33, 0x50888},
+	{0x33, 0x54CC6}, {0x33, 0x58CC9}, {0x33, 0x5CCCC}, {0x33, 0x60CCF},
+	{0x33, 0x64CD2}, {0x33, 0x68CD5}, {0xEF, 0x00000}, {0xEF, 0x00400},
+	{0x33, 0x01D23}, {0x33, 0x05D23}, {0x33, 0x09FA3}, {0x33, 0x0DFA3},
+	{0x33, 0x11D2B}, {0x33, 0x15D2B}, {0x33, 0x19FAB}, {0x33, 0x1DFAB},
+	{0xEF, 0x00000}, {0xEF, 0x00200}, {0x33, 0x00030}, {0x33, 0x04030},
+	{0x33, 0x08030}, {0x33, 0x0C030}, {0x33, 0x10030}, {0x33, 0x14030},
+	{0x33, 0x18030}, {0x33, 0x1C030}, {0x33, 0x20030}, {0x33, 0x24030},
+	{0x33, 0x28030}, {0x33, 0x2C030}, {0x33, 0x30030}, {0x33, 0x34030},
+	{0x33, 0x38030}, {0x33, 0x3C030}, {0xEF, 0x00000}, {0xEF, 0x00100},
+	{0x33, 0x44000}, {0x33, 0x48000}, {0x33, 0x4C000}, {0x33, 0x50000},
+	{0x33, 0x54000}, {0x33, 0x58000}, {0x33, 0x5C000}, {0x33, 0x60000},
+	{0x33, 0x64000}, {0x33, 0x68000}, {0x33, 0x6C000}, {0x33, 0x70000},
+	{0x33, 0x74000}, {0x33, 0x78000}, {0x33, 0x04000}, {0x33, 0x08000},
+	{0x33, 0x0C000}, {0x33, 0x10000}, {0x33, 0x14000}, {0x33, 0x18000},
+	{0x33, 0x1C001}, {0x33, 0x20001}, {0x33, 0x24001}, {0x33, 0x28001},
+	{0x33, 0x2C001}, {0x33, 0x30001}, {0x33, 0x34001}, {0x33, 0x38001},
+	{0xEF, 0x00000}, {0x84, 0x00000}, {0xEF, 0x80010}, {0x30, 0x20000},
+	{0x31, 0x0006F}, {0x32, 0x01FF7}, {0xEF, 0x00000}, {0x84, 0x00000},
+	{0xEF, 0x80000}, {0x30, 0x30000}, {0x31, 0x0006F}, {0x32, 0xF1DF3},
+	{0xEF, 0x00000}, {0x84, 0x00000}, {0xEF, 0x80000}, {0x30, 0x38000},
+	{0x31, 0x0006F}, {0x32, 0xF1FF2}, {0xEF, 0x00000}, {0x1B, 0x746CE},
+	{0xEF, 0x20000}, {0x33, 0x30000}, {0x33, 0x38000}, {0x33, 0x70000},
+	{0x33, 0x78000}, {0xEF, 0x00000}, {0x00, 0x31DD5},
+	{0xff, 0xffffffff}
+};
+
+static int rtl8192fu_identify_chip(struct rtl8xxxu_priv *priv)
+{
+	struct device *dev = &priv->udev->dev;
+	u32 sys_cfg, vendor, val32;
+
+	strscpy(priv->chip_name, "8192FU", sizeof(priv->chip_name));
+	priv->rtl_chip = RTL8192F;
+	priv->rf_paths = 2;
+	priv->rx_paths = 2;
+	priv->tx_paths = 2;
+
+	sys_cfg = rtl8xxxu_read32(priv, REG_SYS_CFG);
+	priv->chip_cut = u32_get_bits(sys_cfg, SYS_CFG_CHIP_VERSION_MASK);
+	if (sys_cfg & SYS_CFG_TRP_VAUX_EN) {
+		dev_info(dev, "Unsupported test chip\n");
+		return -EOPNOTSUPP;
+	}
+
+	val32 = rtl8xxxu_read32(priv, REG_MULTI_FUNC_CTRL);
+	priv->has_wifi = u32_get_bits(val32, MULTI_WIFI_FUNC_EN);
+	priv->has_bluetooth = u32_get_bits(val32, MULTI_BT_FUNC_EN);
+	priv->has_gps = u32_get_bits(val32, MULTI_GPS_FUNC_EN);
+	priv->is_multi_func = 1;
+
+	vendor = sys_cfg & SYS_CFG_VENDOR_ID;
+	rtl8xxxu_identify_vendor_1bit(priv, vendor);
+
+	val32 = rtl8xxxu_read32(priv, REG_GPIO_OUTSTS);
+	priv->rom_rev = u32_get_bits(val32, GPIO_RF_RL_ID);
+
+	return rtl8xxxu_config_endpoints_no_sie(priv);
+}
+
+static void
+rtl8192f_set_tx_power(struct rtl8xxxu_priv *priv, int channel, bool ht40)
+{
+	u8 cck, ofdmbase, mcsbase;
+	u32 val32, ofdm, mcs;
+	int group, cck_group;
+
+	rtl8188f_channel_to_group(channel, &group, &cck_group);
+
+	cck = priv->cck_tx_power_index_A[cck_group];
+
+	rtl8xxxu_write32_mask(priv, REG_TX_AGC_A_CCK1_MCS32, 0x00007f00, cck);
+
+	val32 = (cck << 16) | (cck << 8) | cck;
+	rtl8xxxu_write32_mask(priv, REG_TX_AGC_B_CCK11_A_CCK2_11,
+			      0x7f7f7f00, val32);
+
+	ofdmbase = priv->ht40_1s_tx_power_index_A[group];
+	ofdmbase += priv->ofdm_tx_power_diff[RF_A].a;
+	ofdm = ofdmbase | ofdmbase << 8 | ofdmbase << 16 | ofdmbase << 24;
+
+	rtl8xxxu_write32_mask(priv, REG_TX_AGC_A_RATE18_06, 0x7f7f7f7f, ofdm);
+	rtl8xxxu_write32_mask(priv, REG_TX_AGC_A_RATE54_24, 0x7f7f7f7f, ofdm);
+
+	mcsbase = priv->ht40_1s_tx_power_index_A[group];
+	if (ht40)
+		mcsbase += priv->ht40_tx_power_diff[RF_A].a;
+	else
+		mcsbase += priv->ht20_tx_power_diff[RF_A].a;
+	mcs = mcsbase | mcsbase << 8 | mcsbase << 16 | mcsbase << 24;
+
+	rtl8xxxu_write32_mask(priv, REG_TX_AGC_A_MCS03_MCS00, 0x7f7f7f7f, mcs);
+	rtl8xxxu_write32_mask(priv, REG_TX_AGC_A_MCS07_MCS04, 0x7f7f7f7f, mcs);
+	rtl8xxxu_write32_mask(priv, REG_TX_AGC_A_MCS11_MCS08, 0x7f7f7f7f, mcs);
+	rtl8xxxu_write32_mask(priv, REG_TX_AGC_A_MCS15_MCS12, 0x7f7f7f7f, mcs);
+
+	if (priv->tx_paths == 1)
+		return;
+
+	cck = priv->cck_tx_power_index_B[cck_group];
+
+	val32 = (cck << 16) | (cck << 8) | cck;
+	rtl8xxxu_write32_mask(priv, REG_TX_AGC_B_CCK1_55_MCS32,
+			      0x7f7f7f00, val32);
+
+	rtl8xxxu_write32_mask(priv, REG_TX_AGC_B_CCK11_A_CCK2_11,
+			      0x0000007f, cck);
+
+	ofdmbase = priv->ht40_1s_tx_power_index_B[group];
+	ofdmbase += priv->ofdm_tx_power_diff[RF_B].b;
+	ofdm = ofdmbase | ofdmbase << 8 | ofdmbase << 16 | ofdmbase << 24;
+
+	rtl8xxxu_write32_mask(priv, REG_TX_AGC_B_RATE18_06, 0x7f7f7f7f, ofdm);
+	rtl8xxxu_write32_mask(priv, REG_TX_AGC_B_RATE54_24, 0x7f7f7f7f, ofdm);
+
+	mcsbase = priv->ht40_1s_tx_power_index_B[group];
+	if (ht40)
+		mcsbase += priv->ht40_tx_power_diff[RF_B].b;
+	else
+		mcsbase += priv->ht20_tx_power_diff[RF_B].b;
+	mcs = mcsbase | mcsbase << 8 | mcsbase << 16 | mcsbase << 24;
+
+	rtl8xxxu_write32_mask(priv, REG_TX_AGC_B_MCS03_MCS00, 0x7f7f7f7f, mcs);
+	rtl8xxxu_write32_mask(priv, REG_TX_AGC_B_MCS07_MCS04, 0x7f7f7f7f, mcs);
+	rtl8xxxu_write32_mask(priv, REG_TX_AGC_B_MCS11_MCS08, 0x7f7f7f7f, mcs);
+	rtl8xxxu_write32_mask(priv, REG_TX_AGC_B_MCS15_MCS12, 0x7f7f7f7f, mcs);
+}
+
+static void rtl8192f_revise_cck_tx_psf(struct rtl8xxxu_priv *priv, u8 channel)
+{
+	if (channel == 13) {
+		/* Special value for channel 13 */
+		rtl8xxxu_write32(priv, REG_CCK0_TX_FILTER1, 0xf8fe0001);
+		/* Normal values */
+		rtl8xxxu_write32(priv, REG_CCK0_TX_FILTER2, 0x64B80C1C);
+		rtl8xxxu_write16(priv, REG_CCK0_DEBUG_PORT, 0x8810);
+		rtl8xxxu_write32(priv, REG_CCK0_TX_FILTER3, 0x01235667);
+	} else if (channel == 14) {
+		/* Normal value */
+		rtl8xxxu_write32(priv, REG_CCK0_TX_FILTER1, 0xE82C0001);
+		/* Special values for channel 14 */
+		rtl8xxxu_write32(priv, REG_CCK0_TX_FILTER2, 0x0000B81C);
+		rtl8xxxu_write16(priv, REG_CCK0_DEBUG_PORT, 0x0000);
+		rtl8xxxu_write32(priv, REG_CCK0_TX_FILTER3, 0x00003667);
+	} else {
+		/* Restore normal values from the phy init table */
+		rtl8xxxu_write32(priv, REG_CCK0_TX_FILTER1, 0xE82C0001);
+		rtl8xxxu_write32(priv, REG_CCK0_TX_FILTER2, 0x64B80C1C);
+		rtl8xxxu_write16(priv, REG_CCK0_DEBUG_PORT, 0x8810);
+		rtl8xxxu_write32(priv, REG_CCK0_TX_FILTER3, 0x01235667);
+	}
+}
+
+static void rtl8192fu_config_kfree(struct rtl8xxxu_priv *priv, u8 channel)
+{
+	u8 bb_gain[3] = { EFUSE_UNDEFINED, EFUSE_UNDEFINED, EFUSE_UNDEFINED };
+	u8 bb_gain_path_mask[2] = { 0x0f, 0xf0 };
+	enum rtl8xxxu_rfpath rfpath;
+	u8 bb_gain_for_path;
+	u8 channel_idx = 0;
+
+	if (channel >= 1 && channel <= 3)
+		channel_idx = 0;
+	if (channel >= 4 && channel <= 9)
+		channel_idx = 1;
+	if (channel >= 10 && channel <= 14)
+		channel_idx = 2;
+
+	rtl8xxxu_read_efuse8(priv, 0x1ee, &bb_gain[1]);
+	rtl8xxxu_read_efuse8(priv, 0x1ec, &bb_gain[0]);
+	rtl8xxxu_read_efuse8(priv, 0x1ea, &bb_gain[2]);
+
+	if (bb_gain[1] == EFUSE_UNDEFINED)
+		return;
+
+	if (bb_gain[0] == EFUSE_UNDEFINED)
+		bb_gain[0] = bb_gain[1];
+
+	if (bb_gain[2] == EFUSE_UNDEFINED)
+		bb_gain[2] = bb_gain[1];
+
+	for (rfpath = RF_A; rfpath < priv->rf_paths; rfpath++) {
+		/* power_trim based on 55[19:14] */
+		rtl8xxxu_write_rfreg_mask(priv, rfpath, RF6052_REG_UNKNOWN_55,
+					  BIT(5), 1);
+
+		/* enable 55[14] for 0.5db step */
+		rtl8xxxu_write_rfreg_mask(priv, rfpath, RF6052_REG_GAIN_CTRL,
+					  BIT(18), 1);
+
+		/* enter power_trim debug mode */
+		rtl8xxxu_write_rfreg_mask(priv, rfpath, RF6052_REG_GAIN_CCA,
+					  BIT(7), 1);
+
+		/* write enable */
+		rtl8xxxu_write_rfreg_mask(priv, rfpath, RF6052_REG_WE_LUT, BIT(7), 1);
+
+		bb_gain_for_path = (bb_gain[channel_idx] & bb_gain_path_mask[rfpath]);
+		bb_gain_for_path >>= __ffs(bb_gain_path_mask[rfpath]);
+
+		rtl8xxxu_write_rfreg_mask(priv, rfpath, RF6052_REG_TXPA_G3,
+					  0x70000, channel_idx * 2);
+		rtl8xxxu_write_rfreg_mask(priv, rfpath, RF6052_REG_TXPA_G3,
+					  0x3f, bb_gain_for_path);
+
+		rtl8xxxu_write_rfreg_mask(priv, rfpath, RF6052_REG_TXPA_G3,
+					  0x70000, channel_idx * 2 + 1);
+		rtl8xxxu_write_rfreg_mask(priv, rfpath, RF6052_REG_TXPA_G3,
+					  0x3f, bb_gain_for_path);
+
+		/* leave power_trim debug mode */
+		rtl8xxxu_write_rfreg_mask(priv, rfpath, RF6052_REG_GAIN_CCA,
+					  BIT(7), 0);
+
+		/* write disable */
+		rtl8xxxu_write_rfreg_mask(priv, rfpath, RF6052_REG_WE_LUT, BIT(7), 0);
+	}
+}
+
+static void rtl8192fu_config_channel(struct ieee80211_hw *hw)
+{
+	struct rtl8xxxu_priv *priv = hw->priv;
+	bool ht40 = conf_is_ht40(&hw->conf);
+	u8 channel, subchannel = 0;
+	bool sec_ch_above = 0;
+	u32 val32;
+
+	channel = (u8)hw->conf.chandef.chan->hw_value;
+
+	if (conf_is_ht40_plus(&hw->conf)) {
+		sec_ch_above = 1;
+		channel += 2;
+		subchannel = 2;
+	} else if (conf_is_ht40_minus(&hw->conf)) {
+		sec_ch_above = 0;
+		channel -= 2;
+		subchannel = 1;
+	}
+
+	val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_MODE_AG);
+
+	rtl8192f_revise_cck_tx_psf(priv, channel);
+
+	/* Set channel */
+	val32 &= ~(BIT(18) | BIT(17)); /* select the 2.4G band(?) */
+	u32p_replace_bits(&val32, channel, 0xff);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_MODE_AG, val32);
+	if (priv->rf_paths > 1)
+		rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_MODE_AG, val32);
+
+	rtl8192fu_config_kfree(priv, channel);
+
+	rtl8xxxu_write8(priv, REG_DATA_SUBCHANNEL, subchannel);
+
+	/* small BW */
+	rtl8xxxu_write32_clear(priv, REG_OFDM0_TX_PSDO_NOISE_WEIGHT, GENMASK(31, 30));
+
+	rtl8xxxu_write32_mask(priv, REG_FPGA0_RF_MODE, FPGA_RF_MODE, ht40);
+	rtl8xxxu_write32_mask(priv, REG_FPGA1_RF_MODE, FPGA_RF_MODE, ht40);
+
+	/* ADC clock = 160M */
+	rtl8xxxu_write32_mask(priv, REG_FPGA0_RF_MODE, GENMASK(10, 8), 4);
+
+	/* DAC clock = 80M */
+	rtl8xxxu_write32_mask(priv, REG_FPGA0_RF_MODE, BIT(13) | BIT(12), 2);
+
+	/* ADC buffer clk */
+	rtl8xxxu_write32_mask(priv, REG_ANTDIV_PARA1, BIT(27) | BIT(26), 2);
+
+	if (ht40)
+		/* Set Control channel to upper or lower. */
+		rtl8xxxu_write32_mask(priv, REG_CCK0_SYSTEM,
+				      CCK0_SIDEBAND, !sec_ch_above);
+
+	/* Enable CCK */
+	rtl8xxxu_write32_set(priv, REG_FPGA0_RF_MODE, FPGA_RF_MODE_CCK);
+
+	/* RF TRX_BW */
+	val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_MODE_AG);
+	val32 &= ~MODE_AG_BW_MASK;
+	if (ht40)
+		val32 |= MODE_AG_BW_40MHZ_8723B;
+	else
+		val32 |= MODE_AG_BW_20MHZ_8723B;
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_MODE_AG, val32);
+	if (priv->rf_paths > 1)
+		rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_MODE_AG, val32);
+
+	/* Modify RX DFIR parameters */
+	rtl8xxxu_write32_mask(priv, REG_TAP_UPD_97F, BIT(21) | BIT(20), 2);
+
+	rtl8xxxu_write32_mask(priv, REG_DOWNSAM_FACTOR, BIT(29) | BIT(28), 2);
+
+	if (ht40)
+		val32 = 0x3;
+	else
+		val32 = 0x1a3;
+	rtl8xxxu_write32_mask(priv, REG_RX_DFIR_MOD_97F, 0x1ff, val32);
+}
+
+static void rtl8192fu_init_aggregation(struct rtl8xxxu_priv *priv)
+{
+	u32 agg_rx;
+	u8 agg_ctrl;
+
+	/* RX aggregation */
+	agg_ctrl = rtl8xxxu_read8(priv, REG_TRXDMA_CTRL);
+	agg_ctrl &= ~TRXDMA_CTRL_RXDMA_AGG_EN;
+
+	agg_rx = rtl8xxxu_read32(priv, REG_RXDMA_AGG_PG_TH);
+	agg_rx &= ~RXDMA_USB_AGG_ENABLE;
+	agg_rx &= ~0xFF0F; /* reset agg size and timeout */
+
+	rtl8xxxu_write8(priv, REG_TRXDMA_CTRL, agg_ctrl);
+	rtl8xxxu_write32(priv, REG_RXDMA_AGG_PG_TH, agg_rx);
+}
+
+static int rtl8192fu_parse_efuse(struct rtl8xxxu_priv *priv)
+{
+	struct rtl8192fu_efuse *efuse = &priv->efuse_wifi.efuse8192fu;
+	int i;
+
+	if (efuse->rtl_id != cpu_to_le16(0x8129))
+		return -EINVAL;
+
+	ether_addr_copy(priv->mac_addr, efuse->mac_addr);
+
+	memcpy(priv->cck_tx_power_index_A, efuse->tx_power_index_A.cck_base,
+	       sizeof(efuse->tx_power_index_A.cck_base));
+	memcpy(priv->cck_tx_power_index_B, efuse->tx_power_index_B.cck_base,
+	       sizeof(efuse->tx_power_index_B.cck_base));
+
+	memcpy(priv->ht40_1s_tx_power_index_A,
+	       efuse->tx_power_index_A.ht40_base,
+	       sizeof(efuse->tx_power_index_A.ht40_base));
+	memcpy(priv->ht40_1s_tx_power_index_B,
+	       efuse->tx_power_index_B.ht40_base,
+	       sizeof(efuse->tx_power_index_B.ht40_base));
+
+	priv->ht20_tx_power_diff[0].a =
+		efuse->tx_power_index_A.ht20_ofdm_1s_diff.b;
+	priv->ht20_tx_power_diff[0].b =
+		efuse->tx_power_index_B.ht20_ofdm_1s_diff.b;
+
+	priv->ht40_tx_power_diff[0].a = 0;
+	priv->ht40_tx_power_diff[0].b = 0;
+
+	for (i = 1; i < RTL8723B_TX_COUNT; i++) {
+		priv->ofdm_tx_power_diff[i].a =
+			efuse->tx_power_index_A.pwr_diff[i - 1].ofdm;
+		priv->ofdm_tx_power_diff[i].b =
+			efuse->tx_power_index_B.pwr_diff[i - 1].ofdm;
+
+		priv->ht20_tx_power_diff[i].a =
+			efuse->tx_power_index_A.pwr_diff[i - 1].ht20;
+		priv->ht20_tx_power_diff[i].b =
+			efuse->tx_power_index_B.pwr_diff[i - 1].ht20;
+
+		priv->ht40_tx_power_diff[i].a =
+			efuse->tx_power_index_A.pwr_diff[i - 1].ht40;
+		priv->ht40_tx_power_diff[i].b =
+			efuse->tx_power_index_B.pwr_diff[i - 1].ht40;
+	}
+
+	priv->default_crystal_cap = efuse->xtal_k & 0x3f;
+
+	priv->rfe_type = efuse->rfe_option & 0x1f;
+
+	if (priv->rfe_type != 5 && priv->rfe_type != 1)
+		dev_warn(&priv->udev->dev,
+			 "%s: RFE type %d was not tested. Please send an email to linux-wireless@vger.kernel.org about this.\n",
+			 __func__, priv->rfe_type);
+
+	return 0;
+}
+
+static int rtl8192fu_load_firmware(struct rtl8xxxu_priv *priv)
+{
+	return rtl8xxxu_load_firmware(priv, "rtlwifi/rtl8192fufw.bin");
+}
+
+static void rtl8192fu_init_phy_bb(struct rtl8xxxu_priv *priv)
+{
+	/* Enable BB and RF */
+	rtl8xxxu_write16_set(priv, REG_SYS_FUNC,
+			     SYS_FUNC_BBRSTB | SYS_FUNC_BB_GLB_RSTN);
+
+	rtl8xxxu_write8(priv, REG_RF_CTRL, RF_ENABLE | RF_RSTB | RF_SDMRSTB);
+
+	/* To Fix MAC loopback mode fail. */
+	rtl8xxxu_write8(priv, REG_LDOHCI12_CTRL, 0xf);
+	rtl8xxxu_write8(priv, REG_SYS_SWR_CTRL2 + 1, 0xe9);
+
+	rtl8xxxu_init_phy_regs(priv, rtl8192fu_phy_init_table);
+
+	rtl8xxxu_init_phy_regs(priv, rtl8192f_agc_table);
+}
+
+static int rtl8192fu_init_phy_rf(struct rtl8xxxu_priv *priv)
+{
+	int ret;
+
+	ret = rtl8xxxu_init_phy_rf(priv, rtl8192fu_radioa_init_table, RF_A);
+	if (ret)
+		return ret;
+
+	return rtl8xxxu_init_phy_rf(priv, rtl8192fu_radiob_init_table, RF_B);
+}
+
+static void rtl8192f_phy_lc_calibrate(struct rtl8xxxu_priv *priv)
+{
+	u32 backup_mask = BIT(31) | BIT(30);
+	u32 backup;
+	u32 val32;
+
+	/* Aries's NarrowBand */
+	val32 = rtl8xxxu_read32(priv, REG_OFDM0_TX_PSDO_NOISE_WEIGHT);
+	backup = u32_get_bits(val32, backup_mask);
+
+	u32p_replace_bits(&val32, 0, backup_mask);
+	rtl8xxxu_write32(priv, REG_OFDM0_TX_PSDO_NOISE_WEIGHT, val32);
+
+	rtl8188f_phy_lc_calibrate(priv);
+
+	/* Aries's NarrowBand */
+	val32 = rtl8xxxu_read32(priv, REG_OFDM0_TX_PSDO_NOISE_WEIGHT);
+	u32p_replace_bits(&val32, backup, backup_mask);
+	rtl8xxxu_write32(priv, REG_OFDM0_TX_PSDO_NOISE_WEIGHT, val32);
+
+	/* reset OFDM state */
+	rtl8xxxu_write32_clear(priv, REG_FPGA0_RF_MODE, FPGA_RF_MODE_OFDM);
+	rtl8xxxu_write32_set(priv, REG_FPGA0_RF_MODE, FPGA_RF_MODE_OFDM);
+}
+
+static int rtl8192fu_iqk_path_a(struct rtl8xxxu_priv *priv)
+{
+	u32 reg_eac, reg_e94, reg_e9c, val32;
+	u32 rf_0x58_i, rf_0x58_q;
+	u8 rfe = priv->rfe_type;
+	int result = 0;
+	int ktime, i;
+
+	/* Leave IQK mode */
+	rtl8xxxu_write32_mask(priv, REG_FPGA0_IQK, 0xffffff00, 0);
+
+	rtl8xxxu_write32(priv, REG_FPGA0_ANALOG4, 0xccf000c0);
+	rtl8xxxu_write32(priv, REG_ANAPWR1, 0x44ffbb44);
+	rtl8xxxu_write32(priv, REG_RX_WAIT_CCA, 0x00400040);
+	rtl8xxxu_write32(priv, REG_OFDM0_TRX_PATH_ENABLE, 0x6f005403);
+	rtl8xxxu_write32(priv, REG_OFDM0_TR_MUX_PAR, 0x000804e4);
+	rtl8xxxu_write32(priv, REG_FPGA0_XCD_RF_SW_CTRL, 0x04203400);
+	rtl8xxxu_write32(priv, REG_FPGA0_XA_HSSI_PARM1, 0x01000100);
+
+	rtl8xxxu_write_rfreg_mask(priv, RF_A, RF6052_REG_GAIN_CCA, BIT(4), 1);
+	rtl8xxxu_write_rfreg_mask(priv, RF_A, RF6052_REG_GAIN_CCA, BIT(11), 1);
+	if (rfe == 7 || rfe == 8 || rfe == 9 || rfe == 12)
+		val32 = 0x30;
+	else
+		val32 = 0xe9;
+	rtl8xxxu_write_rfreg_mask(priv, RF_A, RF6052_REG_PAD_TXG, 0x003ff, val32);
+
+	rtl8xxxu_write32_mask(priv, REG_FPGA0_IQK, 0xffffff00, 0x808000);
+
+	/* path-A IQK setting */
+	rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x18008c1c);
+	rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x38008c1c);
+	rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x38008c1c);
+	rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c);
+
+	rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x8214000f);
+	rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x28140000);
+
+	rtl8xxxu_write32(priv, REG_TX_IQK, 0x01007c00);
+	rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800);
+
+	/* LO calibration setting */
+	rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x00e62911);
+
+	/* One shot, path A LOK & IQK */
+	rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xfa005800);
+	rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8005800);
+
+	mdelay(15);
+
+	ktime = 0;
+	while (rtl8xxxu_read32(priv, REG_IQK_RPT_TXA) == 0 && ktime < 21) {
+		mdelay(5);
+		ktime += 5;
+	}
+
+	/* Check failed */
+	reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2);
+	reg_e94 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_A);
+	reg_e9c = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_A);
+
+	/* reload 0xdf and CCK_IND off */
+	rtl8xxxu_write32_mask(priv, REG_FPGA0_IQK, 0xffffff00, 0);
+
+	rtl8xxxu_write_rfreg_mask(priv, RF_A, RF6052_REG_WE_LUT, BIT(4), 1);
+
+	val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_TXMOD);
+	rf_0x58_i = u32_get_bits(val32, 0xfc000);
+	rf_0x58_q = u32_get_bits(val32, 0x003f0);
+
+	for (i = 0; i < 8; i++) {
+		rtl8xxxu_write_rfreg_mask(priv, RF_A, RF6052_REG_TXPA_G3,
+					  0x1c000, i);
+		rtl8xxxu_write_rfreg_mask(priv, RF_A, RF6052_REG_TXPA_G3,
+					  0x00fc0, rf_0x58_i);
+		rtl8xxxu_write_rfreg_mask(priv, RF_A, RF6052_REG_TXPA_G3,
+					  0x0003f, rf_0x58_q);
+	}
+
+	rtl8xxxu_write_rfreg_mask(priv, RF_A, RF6052_REG_AC, BIT(14), 0);
+	rtl8xxxu_write_rfreg_mask(priv, RF_A, RF6052_REG_WE_LUT, BIT(4), 0);
+	rtl8xxxu_write_rfreg_mask(priv, RF_A, RF6052_REG_GAIN_CCA, 0x00810, 0);
+
+	if (!(reg_eac & BIT(28)) &&
+	    ((reg_e94 & 0x03ff0000) != 0x01420000) &&
+	    ((reg_e9c & 0x03ff0000) != 0x00420000))
+		result |= 0x01;
+
+	return result;
+}
+
+static int rtl8192fu_rx_iqk_path_a(struct rtl8xxxu_priv *priv)
+{
+	u32 reg_ea4, reg_eac, reg_e94, reg_e9c, val32;
+	int result = 0;
+	int ktime;
+
+	/* Leave IQK mode */
+	rtl8xxxu_write32_mask(priv, REG_FPGA0_IQK, 0xffffff00, 0);
+
+	/* PA/PAD control by 0x56, and set = 0x0 */
+	rtl8xxxu_write_rfreg_mask(priv, RF_A, RF6052_REG_GAIN_CCA, BIT(1), 1);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_GAIN_P1, 0);
+	rtl8xxxu_write_rfreg_mask(priv, RF_A, RF6052_REG_GAIN_CCA, BIT(11), 1);
+	rtl8xxxu_write_rfreg_mask(priv, RF_A, RF6052_REG_PAD_TXG, 0x003ff, 0x27);
+
+	/* Enter IQK mode */
+	rtl8xxxu_write32_mask(priv, REG_FPGA0_IQK, 0xffffff00, 0x808000);
+
+	/* path-A IQK setting */
+	rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x18008c1c);
+	rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x38008c1c);
+	rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x38008c1c);
+	rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c);
+
+	rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x82160027);
+	rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x28160000);
+
+	/* Tx IQK setting */
+	rtl8xxxu_write32(priv, REG_TX_IQK, 0x01007c00);
+	rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800);
+
+	/* LO calibration setting */
+	rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x0086a911);
+
+	/* One shot, path A LOK & IQK */
+	rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xfa005800);
+	rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8005800);
+
+	mdelay(15);
+
+	ktime = 0;
+	while (rtl8xxxu_read32(priv, REG_IQK_RPT_TXA) == 0 && ktime < 21) {
+		mdelay(5);
+		ktime += 5;
+	}
+
+	/* Check failed */
+	reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2);
+	reg_e94 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_A);
+	reg_e9c = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_A);
+
+	if (!(reg_eac & BIT(28)) &&
+	    ((reg_e94 & 0x03ff0000) != 0x01420000) &&
+	    ((reg_e9c & 0x03ff0000) != 0x00420000)) {
+		result |= 0x01;
+	} else { /* If TX not OK, ignore RX */
+		/* PA/PAD controlled by 0x0 */
+		rtl8xxxu_write32_mask(priv, REG_FPGA0_IQK, 0xffffff00, 0);
+
+		rtl8xxxu_write_rfreg_mask(priv, RF_A, RF6052_REG_GAIN_CCA,
+					  BIT(11), 0);
+
+		return result;
+	}
+
+	val32 = 0x80007c00 | (reg_e94 & 0x3ff0000) | ((reg_e9c & 0x3ff0000) >> 16);
+	rtl8xxxu_write32(priv, REG_TX_IQK, val32);
+
+	/* Modify RX IQK mode table */
+	rtl8xxxu_write32_mask(priv, REG_FPGA0_IQK, 0xffffff00, 0);
+
+	/* PA/PAD control by 0x56, and set = 0x0 */
+	rtl8xxxu_write_rfreg_mask(priv, RF_A, RF6052_REG_GAIN_CCA, BIT(1), 1);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_GAIN_P1, 0);
+	rtl8xxxu_write_rfreg_mask(priv, RF_A, RF6052_REG_GAIN_CCA, BIT(11), 1);
+	rtl8xxxu_write_rfreg_mask(priv, RF_A, RF6052_REG_PAD_TXG, 0x003ff, 0x1e0);
+
+	rtl8xxxu_write32(priv, REG_FPGA0_ANALOG4, 0xccf000c0);
+	rtl8xxxu_write32(priv, REG_ANAPWR1, 0x44ffbb44);
+	rtl8xxxu_write32(priv, REG_RX_WAIT_CCA, 0x00400040);
+	rtl8xxxu_write32(priv, REG_OFDM0_TRX_PATH_ENABLE, 0x6f005403);
+	rtl8xxxu_write32(priv, REG_OFDM0_TR_MUX_PAR, 0x000804e4);
+	rtl8xxxu_write32(priv, REG_FPGA0_XCD_RF_SW_CTRL, 0x04203400);
+	rtl8xxxu_write32(priv, REG_FPGA0_XA_HSSI_PARM1, 0x01000100);
+
+	/* Enter IQK mode */
+	rtl8xxxu_write32_mask(priv, REG_FPGA0_IQK, 0xffffff00, 0x808000);
+
+	/* path-A IQK setting */
+	rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x38008c1c);
+	rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x18008c1c);
+	rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x38008c1c);
+	rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c);
+
+	rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x82170000);
+	rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x28170000);
+
+	/* RX IQK setting */
+	rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800);
+
+	/* LO calibration setting */
+	rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x0046a8d1);
+
+	/* One shot, path A LOK & IQK */
+	rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xfa005800);
+	rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8005800);
+
+	mdelay(15);
+
+	ktime = 0;
+	while (rtl8xxxu_read32(priv, REG_IQK_RPT_RXA) == 0 && ktime < 21) {
+		mdelay(5);
+		ktime += 5;
+	}
+
+	/* Check failed */
+	reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2);
+	reg_ea4 = rtl8xxxu_read32(priv, REG_RX_POWER_BEFORE_IQK_A_2);
+
+	/* Leave IQK mode */
+	rtl8xxxu_write32_mask(priv, REG_FPGA0_IQK, 0xffffff00, 0);
+
+	rtl8xxxu_write_rfreg_mask(priv, RF_A, RF6052_REG_GAIN_CCA, BIT(11), 0);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_GAIN_P1, 0x02000);
+
+	if (!(reg_eac & BIT(27)) &&
+	    ((reg_ea4 & 0x03ff0000) != 0x01320000) &&
+	    ((reg_eac & 0x03ff0000) != 0x00360000))
+		result |= 0x02;
+
+	return result;
+}
+
+static int rtl8192fu_iqk_path_b(struct rtl8xxxu_priv *priv)
+{
+	u32 reg_eac, reg_eb4, reg_ebc, val32;
+	u32 rf_0x58_i, rf_0x58_q;
+	u8 rfe = priv->rfe_type;
+	int result = 0;
+	int ktime, i;
+
+	/* PA/PAD controlled by 0x0 */
+	rtl8xxxu_write32_mask(priv, REG_FPGA0_IQK, 0xffffff00, 0);
+
+	rtl8xxxu_write32(priv, REG_FPGA0_ANALOG4, 0xccf000c0);
+	rtl8xxxu_write32(priv, REG_ANAPWR1, 0x44ffbb44);
+	rtl8xxxu_write32(priv, REG_RX_WAIT_CCA, 0x00400040);
+	rtl8xxxu_write32(priv, REG_OFDM0_TRX_PATH_ENABLE, 0x6f005403);
+	rtl8xxxu_write32(priv, REG_OFDM0_TR_MUX_PAR, 0x000804e4);
+	rtl8xxxu_write32(priv, REG_FPGA0_XCD_RF_SW_CTRL, 0x04203400);
+	rtl8xxxu_write32(priv, REG_FPGA0_XA_HSSI_PARM1, 0x01000000);
+
+	rtl8xxxu_write_rfreg_mask(priv, RF_B, RF6052_REG_GAIN_CCA, BIT(4), 1);
+	rtl8xxxu_write_rfreg_mask(priv, RF_B, RF6052_REG_GAIN_CCA, BIT(11), 1);
+	if (rfe == 7 || rfe == 8 || rfe == 9 || rfe == 12)
+		rtl8xxxu_write_rfreg_mask(priv, RF_B, RF6052_REG_PAD_TXG,
+					  0x003ff, 0x30);
+	else
+		rtl8xxxu_write_rfreg_mask(priv, RF_B, RF6052_REG_PAD_TXG,
+					  0x00fff, 0xe9);
+
+	rtl8xxxu_write32_mask(priv, REG_FPGA0_IQK, 0xffffff00, 0x808000);
+
+	/* Path B IQK setting */
+	rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x38008c1c);
+	rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x38008c1c);
+	rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x18008c1c);
+	rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c);
+
+	rtl8xxxu_write32(priv, REG_TX_IQK_PI_B, 0x8214000F);
+	rtl8xxxu_write32(priv, REG_RX_IQK_PI_B, 0x28140000);
+
+	rtl8xxxu_write32(priv, REG_TX_IQK, 0x01007c00);
+	rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800);
+
+	/* LO calibration setting */
+	rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x00e62911);
+
+	/* One shot, path B LOK & IQK */
+	rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xfa005800);
+	rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8005800);
+
+	mdelay(15);
+
+	ktime = 0;
+	while (rtl8xxxu_read32(priv, REG_IQK_RPT_TXB) == 0 && ktime < 21) {
+		mdelay(5);
+		ktime += 5;
+	}
+
+	/* Check failed */
+	reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2);
+	reg_eb4 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_B);
+	reg_ebc = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_B);
+
+	/* reload 0xdf and CCK_IND off */
+	rtl8xxxu_write32_mask(priv, REG_FPGA0_IQK, 0xffffff00, 0);
+
+	rtl8xxxu_write_rfreg_mask(priv, RF_B, RF6052_REG_WE_LUT, BIT(4), 1);
+
+	val32 = rtl8xxxu_read_rfreg(priv, RF_B, RF6052_REG_TXMOD);
+	rf_0x58_i = u32_get_bits(val32, 0xfc000);
+	rf_0x58_q = u32_get_bits(val32, 0x003f0);
+
+	for (i = 0; i < 8; i++) {
+		rtl8xxxu_write_rfreg_mask(priv, RF_B, RF6052_REG_TXPA_G3,
+					  0x1c000, i);
+		rtl8xxxu_write_rfreg_mask(priv, RF_B, RF6052_REG_TXPA_G3,
+					  0x00fc0, rf_0x58_i);
+		rtl8xxxu_write_rfreg_mask(priv, RF_B, RF6052_REG_TXPA_G3,
+					  0x0003f, rf_0x58_q);
+	}
+
+	rtl8xxxu_write_rfreg_mask(priv, RF_B, RF6052_REG_AC, BIT(14), 0);
+	rtl8xxxu_write_rfreg_mask(priv, RF_B, RF6052_REG_WE_LUT, BIT(4), 0);
+	rtl8xxxu_write_rfreg_mask(priv, RF_B, RF6052_REG_GAIN_CCA, 0x00810, 0);
+
+	if (!(reg_eac & BIT(31)) &&
+	    ((reg_eb4 & 0x03ff0000) != 0x01420000) &&
+	    ((reg_ebc & 0x03ff0000) != 0x00420000))
+		result |= 0x01;
+	else
+		dev_warn(&priv->udev->dev, "%s: Path B IQK failed!\n",
+			 __func__);
+
+	return result;
+}
+
+static int rtl8192fu_rx_iqk_path_b(struct rtl8xxxu_priv *priv)
+{
+	u32 reg_eac, reg_eb4, reg_ebc, reg_ec4, reg_ecc, val32;
+	int result = 0;
+	int ktime;
+
+	/* Leave IQK mode */
+	rtl8xxxu_write32_mask(priv, REG_FPGA0_IQK, 0xffffff00, 0);
+
+	rtl8xxxu_write_rfreg_mask(priv, RF_B, RF6052_REG_GAIN_CCA, BIT(1), 1);
+	rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_GAIN_P1, 0);
+	rtl8xxxu_write_rfreg_mask(priv, RF_B, RF6052_REG_GAIN_CCA, BIT(11), 1);
+	rtl8xxxu_write_rfreg_mask(priv, RF_B, RF6052_REG_PAD_TXG, 0x003ff, 0x67);
+
+	rtl8xxxu_write32(priv, REG_FPGA0_ANALOG4, 0xccf000c0);
+	rtl8xxxu_write32(priv, REG_ANAPWR1, 0x44ffbb44);
+	rtl8xxxu_write32(priv, REG_RX_WAIT_CCA, 0x00400040);
+	rtl8xxxu_write32(priv, REG_OFDM0_TRX_PATH_ENABLE, 0x6f005403);
+	rtl8xxxu_write32(priv, REG_OFDM0_TR_MUX_PAR, 0x000804e4);
+	rtl8xxxu_write32(priv, REG_FPGA0_XCD_RF_SW_CTRL, 0x04203400);
+	rtl8xxxu_write32(priv, REG_FPGA0_XA_HSSI_PARM1, 0x01000000);
+
+	rtl8xxxu_write32_mask(priv, REG_FPGA0_IQK, 0xffffff00, 0x808000);
+
+	/* path-B IQK setting */
+	rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x38008c1c);
+	rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x38008c1c);
+	rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x18008c1c);
+	rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c);
+
+	rtl8xxxu_write32(priv, REG_TX_IQK_PI_B, 0x82160027);
+	rtl8xxxu_write32(priv, REG_RX_IQK_PI_B, 0x28160000);
+
+	/* LO calibration setting */
+	rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x0086a911);
+
+	/* One shot, path A LOK & IQK */
+	rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xfa005800);
+	rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8005800);
+
+	mdelay(15);
+
+	ktime = 0;
+	while (rtl8xxxu_read32(priv, REG_IQK_RPT_TXB) == 0 && ktime < 21) {
+		mdelay(5);
+		ktime += 5;
+	}
+
+	/* Check failed */
+	reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2);
+	reg_eb4 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_B);
+	reg_ebc = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_B);
+
+	if (!(reg_eac & BIT(31)) &&
+	    ((reg_eb4 & 0x03ff0000) != 0x01420000) &&
+	    ((reg_ebc & 0x03ff0000) != 0x00420000)) {
+		result |= 0x01;
+	} else {
+		/* PA/PAD controlled by 0x0 */
+		rtl8xxxu_write32_mask(priv, REG_FPGA0_IQK, 0xffffff00, 0);
+
+		rtl8xxxu_write_rfreg_mask(priv, RF_B, RF6052_REG_GAIN_CCA,
+					  BIT(11), 0);
+
+		return result;
+	}
+
+	val32 = 0x80007c00 | (reg_eb4 & 0x03ff0000) | ((reg_ebc >> 16) & 0x03ff);
+	rtl8xxxu_write32(priv, REG_TX_IQK, val32);
+
+	/* Modify RX IQK mode table */
+	rtl8xxxu_write32_mask(priv, REG_FPGA0_IQK, 0xffffff00, 0);
+
+	rtl8xxxu_write_rfreg_mask(priv, RF_B, RF6052_REG_GAIN_CCA, BIT(1), 1);
+	rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_GAIN_P1, 0);
+	rtl8xxxu_write_rfreg_mask(priv, RF_B, RF6052_REG_GAIN_CCA, BIT(11), 1);
+	rtl8xxxu_write_rfreg_mask(priv, RF_B, RF6052_REG_PAD_TXG, 0x003ff, 0x1e0);
+
+	rtl8xxxu_write32(priv, REG_FPGA0_ANALOG4, 0xccf000c0);
+	rtl8xxxu_write32(priv, REG_ANAPWR1, 0x44ffbb44);
+	rtl8xxxu_write32(priv, REG_RX_WAIT_CCA, 0x00400040);
+	rtl8xxxu_write32(priv, REG_OFDM0_TRX_PATH_ENABLE, 0x6f005403);
+	rtl8xxxu_write32(priv, REG_OFDM0_TR_MUX_PAR, 0x000804e4);
+	rtl8xxxu_write32(priv, REG_FPGA0_XCD_RF_SW_CTRL, 0x04203400);
+	rtl8xxxu_write32(priv, REG_FPGA0_XA_HSSI_PARM1, 0x01000000);
+
+	rtl8xxxu_write32_mask(priv, REG_FPGA0_IQK, 0xffffff00, 0x808000);
+
+	/* Path B IQK setting */
+	rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x38008c1c);
+	rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x38008c1c);
+	rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x38008c1c);
+	rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x18008c1c);
+
+	rtl8xxxu_write32(priv, REG_TX_IQK_PI_B, 0x82170000);
+	rtl8xxxu_write32(priv, REG_RX_IQK_PI_B, 0x28170000);
+
+	/* IQK setting */
+	rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800);
+
+	/* LO calibration setting */
+	rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x0046a911);
+
+	/* One shot, path A LOK & IQK */
+	rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xfa005800);
+	rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8005800);
+
+	mdelay(15);
+
+	ktime = 0;
+	while (rtl8xxxu_read32(priv, REG_IQK_RPT_RXB) == 0 && ktime < 21) {
+		mdelay(5);
+		ktime += 5;
+	}
+
+	reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2);
+	reg_ec4 = rtl8xxxu_read32(priv, REG_RX_POWER_BEFORE_IQK_B_2);
+	reg_ecc = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_B_2);
+
+	rtl8xxxu_write32_mask(priv, REG_FPGA0_IQK, 0xffffff00, 0);
+	rtl8xxxu_write32(priv, REG_FPGA0_XA_HSSI_PARM1, 0x01000100);
+
+	rtl8xxxu_write_rfreg_mask(priv, RF_B, RF6052_REG_GAIN_CCA, BIT(11), 0);
+	rtl8xxxu_write_rfreg_mask(priv, RF_B, RF6052_REG_GAIN_CCA, BIT(1), 0);
+	rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_GAIN_P1, 0x02000);
+
+	if (!(reg_eac & BIT(30)) &&
+	    ((reg_ec4 & 0x03ff0000) != 0x01320000) &&
+	    ((reg_ecc & 0x03ff0000) != 0x00360000))
+		result |= 0x02;
+	else
+		dev_warn(&priv->udev->dev, "%s: Path B RX IQK failed!\n",
+			 __func__);
+
+	return result;
+}
+
+static void rtl8192fu_phy_iqcalibrate(struct rtl8xxxu_priv *priv,
+				      int result[][8], int t)
+{
+	static const u32 adda_regs[2] = {
+		REG_ANAPWR1, REG_RX_WAIT_CCA
+	};
+	static const u32 iqk_mac_regs[RTL8XXXU_MAC_REGS] = {
+		REG_TXPAUSE, REG_BEACON_CTRL,
+		REG_BEACON_CTRL_1, REG_GPIO_MUXCFG
+	};
+	static const u32 iqk_bb_regs[RTL8XXXU_BB_REGS] = {
+		REG_OFDM0_TRX_PATH_ENABLE, REG_OFDM0_TR_MUX_PAR,
+		REG_FPGA0_XCD_RF_SW_CTRL, REG_CONFIG_ANT_A, REG_CONFIG_ANT_B,
+		REG_DPDT_CTRL, REG_RFE_CTRL_ANTA_SRC,
+		REG_RFE_CTRL_ANT_SRC2, REG_CCK0_AFE_SETTING
+	};
+	u32 rx_initial_gain_a, rx_initial_gain_b;
+	struct device *dev = &priv->udev->dev;
+	int path_a_ok, path_b_ok;
+	u8 rfe = priv->rfe_type;
+	int retry = 2;
+	u32 i, val32;
+
+	/*
+	 * Note: IQ calibration must be performed after loading
+	 *       PHY_REG.txt , and radio_a, radio_b.txt
+	 */
+
+	rtl8xxxu_write32_mask(priv, REG_FPGA0_IQK, 0xffffff00, 0);
+
+	rx_initial_gain_a = rtl8xxxu_read32(priv, REG_OFDM0_XA_AGC_CORE1);
+	rx_initial_gain_b = rtl8xxxu_read32(priv, REG_OFDM0_XB_AGC_CORE1);
+
+	if (t == 0) {
+		/* Save ADDA parameters, turn Path A ADDA on */
+		rtl8xxxu_save_regs(priv, adda_regs, priv->adda_backup,
+				   ARRAY_SIZE(adda_regs));
+		rtl8xxxu_save_mac_regs(priv, iqk_mac_regs, priv->mac_backup);
+		rtl8xxxu_save_regs(priv, iqk_bb_regs,
+				   priv->bb_backup, RTL8XXXU_BB_REGS);
+	}
+
+	/* Instead of rtl8xxxu_path_adda_on */
+	rtl8xxxu_write32_set(priv, REG_FPGA0_XCD_RF_PARM, BIT(31));
+
+	/* MAC settings */
+	rtl8xxxu_write8(priv, REG_TXPAUSE, 0xff);
+	rtl8xxxu_write8_clear(priv, REG_GPIO_MUXCFG, GPIO_MUXCFG_IO_SEL_ENBT);
+
+	if (rfe == 7 || rfe == 8 || rfe == 9 || rfe == 12) {
+		/* in ePA IQK, rfe_func_config & SW both pull down */
+		/* path A */
+		rtl8xxxu_write32_mask(priv, REG_RFE_CTRL_ANTA_SRC, 0xF, 0x7);
+		rtl8xxxu_write32_mask(priv, REG_DPDT_CTRL, 0x1, 0x0);
+
+		rtl8xxxu_write32_mask(priv, REG_RFE_CTRL_ANTA_SRC, 0xF00, 0x7);
+		rtl8xxxu_write32_mask(priv, REG_DPDT_CTRL, 0x4, 0x0);
+
+		rtl8xxxu_write32_mask(priv, REG_RFE_CTRL_ANTA_SRC, 0xF000, 0x7);
+		rtl8xxxu_write32_mask(priv, REG_DPDT_CTRL, 0x8, 0x0);
+
+		/* path B */
+		rtl8xxxu_write32_mask(priv, REG_RFE_CTRL_ANT_SRC2, 0xF0, 0x7);
+		rtl8xxxu_write32_mask(priv, REG_DPDT_CTRL, 0x20000, 0x0);
+
+		rtl8xxxu_write32_mask(priv, REG_RFE_CTRL_ANT_SRC2, 0xF0000, 0x7);
+		rtl8xxxu_write32_mask(priv, REG_DPDT_CTRL, 0x100000, 0x0);
+
+		rtl8xxxu_write32_mask(priv, REG_RFE_CTRL_ANT_SRC3, 0xF000, 0x7);
+		rtl8xxxu_write32_mask(priv, REG_DPDT_CTRL, 0x8000000, 0x0);
+	}
+
+	if (priv->rf_paths > 1) {
+		/* path B standby */
+		rtl8xxxu_write32_mask(priv, REG_FPGA0_IQK, 0xffffff00, 0x000000);
+		rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_AC, 0x10000);
+		rtl8xxxu_write32_mask(priv, REG_FPGA0_IQK, 0xffffff00, 0x808000);
+	}
+
+	for (i = 0; i < retry; i++) {
+		path_a_ok = rtl8192fu_iqk_path_a(priv);
+
+		if (path_a_ok == 0x01) {
+			val32 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_A);
+			result[t][0] = (val32 >> 16) & 0x3ff;
+
+			val32 = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_A);
+			result[t][1] = (val32 >> 16) & 0x3ff;
+			break;
+		} else {
+			result[t][0] = 0x100;
+			result[t][1] = 0x0;
+		}
+	}
+
+	for (i = 0; i < retry; i++) {
+		path_a_ok = rtl8192fu_rx_iqk_path_a(priv);
+
+		if (path_a_ok == 0x03) {
+			val32 = rtl8xxxu_read32(priv, REG_RX_POWER_BEFORE_IQK_A_2);
+			result[t][2] = (val32 >> 16) & 0x3ff;
+
+			val32 = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2);
+			result[t][3] = (val32 >> 16) & 0x3ff;
+			break;
+		} else {
+			result[t][2] = 0x100;
+			result[t][3] = 0x0;
+		}
+	}
+
+	if (!path_a_ok)
+		dev_warn(dev, "%s: Path A IQK failed!\n", __func__);
+
+	if (priv->rf_paths > 1) {
+		for (i = 0; i < retry; i++) {
+			path_b_ok = rtl8192fu_iqk_path_b(priv);
+
+			if (path_b_ok == 0x01) {
+				val32 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_B);
+				result[t][4] = (val32 >> 16) & 0x3ff;
+
+				val32 = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_B);
+				result[t][5] = (val32 >> 16) & 0x3ff;
+				break;
+			} else {
+				result[t][4] = 0x100;
+				result[t][5] = 0x0;
+			}
+		}
+
+		for (i = 0; i < retry; i++) {
+			path_b_ok = rtl8192fu_rx_iqk_path_b(priv);
+
+			if (path_b_ok == 0x03) {
+				val32 = rtl8xxxu_read32(priv, REG_RX_POWER_BEFORE_IQK_B_2);
+				result[t][6] = (val32 >> 16) & 0x3ff;
+
+				val32 = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_B_2);
+				result[t][7] = (val32 >> 16) & 0x3ff;
+				break;
+			} else {
+				result[t][6] = 0x100;
+				result[t][7] = 0x0;
+			}
+		}
+
+		if (!path_b_ok)
+			dev_warn(dev, "%s: Path B IQK failed!\n", __func__);
+	}
+
+	/* Back to BB mode, load original value */
+	rtl8xxxu_write32_mask(priv, REG_FPGA0_IQK, 0xffffff00, 0);
+
+	rtl8xxxu_write32(priv, REG_FPGA0_ANALOG4, 0xcc0000c0);
+
+	rtl8xxxu_write32(priv, REG_ANAPWR1, 0x44bbbb44);
+	rtl8xxxu_write32(priv, REG_RX_WAIT_CCA, 0x80408040);
+	rtl8xxxu_write32(priv, REG_OFDM0_TRX_PATH_ENABLE, 0x6f005433);
+	rtl8xxxu_write32(priv, REG_OFDM0_TR_MUX_PAR, 0x000004e4);
+	rtl8xxxu_write32(priv, REG_FPGA0_XCD_RF_SW_CTRL, 0x04003400);
+	rtl8xxxu_write32(priv, REG_FPGA0_XA_HSSI_PARM1, 0x01000100);
+
+	/* Reload ADDA power saving parameters */
+	rtl8xxxu_restore_regs(priv, adda_regs, priv->adda_backup,
+			      ARRAY_SIZE(adda_regs));
+
+	/* Reload MAC parameters */
+	rtl8xxxu_restore_mac_regs(priv, iqk_mac_regs, priv->mac_backup);
+
+	/* Reload BB parameters */
+	rtl8xxxu_restore_regs(priv, iqk_bb_regs, priv->bb_backup, RTL8XXXU_BB_REGS);
+
+	rtl8xxxu_write32_clear(priv, REG_FPGA0_XCD_RF_PARM, BIT(31));
+
+	/* Restore RX initial gain */
+	rtl8xxxu_write32_mask(priv, REG_OFDM0_XA_AGC_CORE1, 0xff, 0x50);
+	rtl8xxxu_write32_mask(priv, REG_OFDM0_XA_AGC_CORE1, 0xff,
+			      rx_initial_gain_a & 0xff);
+	if (priv->rf_paths > 1) {
+		rtl8xxxu_write32_mask(priv, REG_OFDM0_XB_AGC_CORE1, 0xff, 0x50);
+		rtl8xxxu_write32_mask(priv, REG_OFDM0_XB_AGC_CORE1, 0xff,
+				      rx_initial_gain_b & 0xff);
+	}
+}
+
+static void rtl8192fu_phy_iq_calibrate(struct rtl8xxxu_priv *priv)
+{
+	s32 reg_e94, reg_e9c, reg_ea4, reg_eac;
+	s32 reg_eb4, reg_ebc, reg_ec4, reg_ecc;
+	struct device *dev = &priv->udev->dev;
+	u32 path_a_0xdf, path_a_0x35;
+	u32 path_b_0xdf, path_b_0x35;
+	bool path_a_ok, path_b_ok;
+	u8 rfe = priv->rfe_type;
+	u32 rfe_path_select;
+	int result[4][8]; /* last is final result */
+	int i, candidate;
+	s32 reg_tmp = 0;
+	bool simu;
+	u32 val32;
+
+	rfe_path_select = rtl8xxxu_read32(priv, REG_RFE_PATH_SELECT);
+
+	path_a_0xdf = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_GAIN_CCA);
+	path_a_0x35 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_GAIN_P1);
+	path_b_0xdf = rtl8xxxu_read_rfreg(priv, RF_B, RF6052_REG_GAIN_CCA);
+	path_b_0x35 = rtl8xxxu_read_rfreg(priv, RF_B, RF6052_REG_GAIN_P1);
+
+	memset(result, 0, sizeof(result));
+	candidate = -1;
+
+	path_a_ok = false;
+	path_b_ok = false;
+
+	for (i = 0; i < 3; i++) {
+		rtl8192fu_phy_iqcalibrate(priv, result, i);
+
+		if (i == 1) {
+			simu = rtl8xxxu_gen2_simularity_compare(priv, result, 0, 1);
+			if (simu) {
+				candidate = 0;
+				break;
+			}
+		}
+
+		if (i == 2) {
+			simu = rtl8xxxu_gen2_simularity_compare(priv, result, 0, 2);
+			if (simu) {
+				candidate = 0;
+				break;
+			}
+
+			simu = rtl8xxxu_gen2_simularity_compare(priv, result, 1, 2);
+			if (simu) {
+				candidate = 1;
+			} else {
+				for (i = 0; i < 8; i++)
+					reg_tmp += result[3][i];
+
+				if (reg_tmp)
+					candidate = 3;
+				else
+					candidate = -1;
+			}
+		}
+	}
+
+	if (candidate >= 0) {
+		reg_e94 = result[candidate][0];
+		reg_e9c = result[candidate][1];
+		reg_ea4 = result[candidate][2];
+		reg_eac = result[candidate][3];
+		reg_eb4 = result[candidate][4];
+		reg_ebc = result[candidate][5];
+		reg_ec4 = result[candidate][6];
+		reg_ecc = result[candidate][7];
+
+		dev_dbg(dev, "%s: candidate is %x\n", __func__, candidate);
+		dev_dbg(dev, "%s: e94=%x e9c=%x ea4=%x eac=%x eb4=%x ebc=%x ec4=%x ecc=%c\n",
+			__func__, reg_e94, reg_e9c, reg_ea4, reg_eac,
+			reg_eb4, reg_ebc, reg_ec4, reg_ecc);
+
+		path_a_ok = true;
+		path_b_ok = true;
+	}
+
+	rtl8xxxu_write32_mask(priv, REG_TX_IQK_TONE_A, 0x3ff00000, 0x100);
+	rtl8xxxu_write32_mask(priv, REG_NP_ANTA, 0x3ff, 0);
+	rtl8xxxu_write32_mask(priv, REG_TX_IQK_TONE_B, 0x3ff00000, 0x100);
+	rtl8xxxu_write32_mask(priv, REG_TAP_UPD_97F, 0x3ff, 0);
+
+	if (candidate >= 0) {
+		if (reg_e94)
+			rtl8xxxu_fill_iqk_matrix_a(priv, path_a_ok, result,
+						   candidate, (reg_ea4 == 0));
+
+		if (reg_eb4)
+			rtl8xxxu_fill_iqk_matrix_b(priv, path_b_ok, result,
+						   candidate, (reg_ec4 == 0));
+	}
+
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_GAIN_CCA, path_a_0xdf);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_GAIN_P1, path_a_0x35);
+	rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_GAIN_CCA, path_b_0xdf);
+	rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_GAIN_P1, path_b_0x35);
+
+	if (rfe == 7 || rfe == 8 || rfe == 9 || rfe == 12) {
+		rtl8xxxu_write32_set(priv, REG_SW_GPIO_SHARE_CTRL_1, 0x70000);
+		rtl8xxxu_write32_clear(priv, REG_LEDCFG0, 0x6c00000);
+		rtl8xxxu_write32_set(priv, REG_PAD_CTRL1, BIT(29) | BIT(28));
+		rtl8xxxu_write32_clear(priv, REG_SW_GPIO_SHARE_CTRL_0,
+				       0x600000 | BIT(4));
+
+		/*
+		 * Originally:
+		 * odm_set_bb_reg(dm, R_0x944, BIT(11) | 0x1F, 0x3F);
+		 *
+		 * It clears bit 11 and sets bits 0..4. The mask doesn't cover
+		 * bit 5 so it's not modified. Is that what it's supposed to
+		 * accomplish?
+		 */
+		val32 = rtl8xxxu_read32(priv, REG_RFE_BUFFER);
+		val32 &= ~BIT(11);
+		val32 |= 0x1f;
+		rtl8xxxu_write32(priv, REG_RFE_BUFFER, val32);
+
+		if (rfe == 7) {
+			rtl8xxxu_write32_mask(priv, REG_RFE_CTRL_ANTA_SRC,
+					      0xfffff, 0x23200);
+			rtl8xxxu_write32_mask(priv, REG_RFE_CTRL_ANT_SRC2,
+					      0xfffff, 0x23200);
+			rtl8xxxu_write32_mask(priv, REG_RFE_CTRL_ANT_SRC1,
+					      0xf000, 0x3);
+			rtl8xxxu_write32_mask(priv, REG_RFE_CTRL_ANT_SRC3,
+					      0xf000, 0x3);
+		} else {
+			rtl8xxxu_write32_mask(priv, REG_RFE_CTRL_ANTA_SRC,
+					      0xfffff, 0x22200);
+			rtl8xxxu_write32_mask(priv, REG_RFE_CTRL_ANT_SRC2,
+					      0xfffff, 0x22200);
+			rtl8xxxu_write32_mask(priv, REG_RFE_CTRL_ANT_SRC1,
+					      0xf000, 0x2);
+			rtl8xxxu_write32_mask(priv, REG_RFE_CTRL_ANT_SRC3,
+					      0xf000, 0x2);
+		}
+
+		rtl8xxxu_write32_clear(priv, REG_RFE_OPT62, BIT(2));
+
+		if (rfe == 7)
+			rtl8xxxu_write32(priv, REG_RFE_OPT, 0x03000003);
+
+		rtl8xxxu_write32(priv, REG_RFE_PATH_SELECT, rfe_path_select);
+	}
+}
+
+static void rtl8192fu_disabled_to_emu(struct rtl8xxxu_priv *priv)
+{
+	rtl8xxxu_write16_clear(priv, REG_APS_FSMCO,
+			       APS_FSMCO_HW_POWERDOWN | APS_FSMCO_HW_SUSPEND);
+
+	rtl8xxxu_write32_clear(priv, REG_GPIO_INTM, BIT(16));
+
+	rtl8xxxu_write16_clear(priv, REG_APS_FSMCO,
+			       APS_FSMCO_PCIE | APS_FSMCO_HW_SUSPEND);
+}
+
+static int rtl8192fu_emu_to_active(struct rtl8xxxu_priv *priv)
+{
+	u32 val32;
+	u16 val16;
+	int count;
+
+	/* enable LDOA12 MACRO block for all interface */
+	rtl8xxxu_write8_set(priv, REG_LDOA15_CTRL, LDOA15_ENABLE);
+
+	/* disable BT_GPS_SEL pins */
+	rtl8xxxu_write32_clear(priv, REG_PAD_CTRL1, BIT(28));
+
+	mdelay(1);
+
+	/* release analog Ips to digital */
+	rtl8xxxu_write8_clear(priv, REG_SYS_ISO_CTRL, SYS_ISO_ANALOG_IPS);
+
+	val16 = APS_FSMCO_PCIE | APS_FSMCO_HW_SUSPEND | APS_FSMCO_SW_LPS;
+	rtl8xxxu_write16_clear(priv, REG_APS_FSMCO, val16);
+
+	/* wait till 0x04[17] = 1 power ready */
+	for (count = RTL8XXXU_MAX_REG_POLL; count; count--) {
+		val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO);
+		if (val32 & BIT(17))
+			break;
+
+		udelay(10);
+	}
+
+	if (!count)
+		return -EBUSY;
+
+	rtl8xxxu_write32_set(priv, REG_APS_FSMCO, APS_FSMCO_WLON_RESET);
+
+	for (count = RTL8XXXU_MAX_REG_POLL; count; count--) {
+		val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO);
+		if ((val32 & (APS_FSMCO_MAC_ENABLE | APS_FSMCO_MAC_OFF)) == 0)
+			break;
+
+		udelay(10);
+	}
+
+	if (!count)
+		return -EBUSY;
+
+	/* SWR OCP enable */
+	rtl8xxxu_write32_set(priv, REG_AFE_MISC, BIT(18));
+
+	rtl8xxxu_write16_clear(priv, REG_APS_FSMCO, APS_FSMCO_HW_POWERDOWN);
+
+	rtl8xxxu_write16_clear(priv, REG_APS_FSMCO,
+			       APS_FSMCO_PCIE | APS_FSMCO_HW_SUSPEND);
+
+	/* 0x7c[31]=1, LDO has max output capability */
+	rtl8xxxu_write32_set(priv, REG_LDO_SW_CTRL, BIT(31));
+
+	rtl8xxxu_write16_set(priv, REG_APS_FSMCO, APS_FSMCO_MAC_ENABLE);
+
+	for (count = RTL8XXXU_MAX_REG_POLL; count; count--) {
+		val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO);
+		if ((val32 & APS_FSMCO_MAC_ENABLE) == 0)
+			break;
+
+		udelay(10);
+	}
+
+	if (!count)
+		return -EBUSY;
+
+	/* Enable WL control XTAL setting */
+	rtl8xxxu_write8_set(priv, REG_AFE_MISC, AFE_MISC_WL_XTAL_CTRL);
+
+	/* Enable falling edge triggering interrupt */
+	rtl8xxxu_write16_set(priv, REG_GPIO_INTM, GPIO_INTM_EDGE_TRIG_IRQ);
+
+	/* Enable GPIO9 data mode */
+	rtl8xxxu_write16_clear(priv, REG_GPIO_IO_SEL_2, GPIO_IO_SEL_2_GPIO09_IRQ);
+
+	/* Enable GPIO9 input mode */
+	rtl8xxxu_write16_clear(priv, REG_GPIO_IO_SEL_2, GPIO_IO_SEL_2_GPIO09_INPUT);
+
+	/* Enable HSISR GPIO[C:0] interrupt */
+	rtl8xxxu_write8_set(priv, REG_HSIMR, BIT(0));
+
+	/* RF HW ON/OFF Enable */
+	rtl8xxxu_write8_clear(priv, REG_MULTI_FUNC_CTRL, MULTI_WIFI_HW_ROF_EN);
+
+	/* Register Lock Disable */
+	rtl8xxxu_write8_set(priv, REG_RSV_CTRL, BIT(7));
+
+	/* For GPIO9 internal pull high setting */
+	rtl8xxxu_write16_set(priv, REG_MULTI_FUNC_CTRL, BIT(14));
+
+	/* reset RF path S1 */
+	rtl8xxxu_write8(priv, REG_RF_CTRL, 0);
+
+	/* reset RF path S0 */
+	rtl8xxxu_write8(priv, REG_AFE_CTRL4 + 3, 0);
+
+	/* enable RF path S1 */
+	rtl8xxxu_write8(priv, REG_RF_CTRL, RF_SDMRSTB | RF_RSTB | RF_ENABLE);
+
+	/* enable RF path S0 */
+	rtl8xxxu_write8(priv, REG_AFE_CTRL4 + 3, RF_SDMRSTB | RF_RSTB | RF_ENABLE);
+
+	/* AFE_Ctrl */
+	rtl8xxxu_write8_set(priv, REG_RSVD_1, BIT(5));
+
+	/* AFE_Ctrl */
+	rtl8xxxu_write8(priv, REG_RSVD_4, 0xcc);
+
+	/* AFE_Ctrl 0x24[4:3]=00 for xtal gmn */
+	rtl8xxxu_write8_clear(priv, REG_AFE_XTAL_CTRL, BIT(4) | BIT(3));
+
+	/* GPIO_A[31:0] Pull down software register */
+	rtl8xxxu_write32(priv, REG_GPIO_A0, 0xffffffff);
+
+	/* GPIO_B[7:0] Pull down software register */
+	rtl8xxxu_write8(priv, REG_GPIO_B0, 0xff);
+
+	/* Register Lock Enable */
+	rtl8xxxu_write8_clear(priv, REG_RSV_CTRL, BIT(7));
+
+	return 0;
+}
+
+static int rtl8192fu_active_to_emu(struct rtl8xxxu_priv *priv)
+{
+	u32 val32;
+	int count;
+
+	/* Reset BB, RF enter Power Down mode */
+	rtl8xxxu_write8_clear(priv, REG_SYS_FUNC, SYS_FUNC_BBRSTB);
+
+	/* Enable rising edge triggering interrupt */
+	rtl8xxxu_write16_clear(priv, REG_GPIO_INTM, GPIO_INTM_EDGE_TRIG_IRQ);
+
+	/* release WLON reset */
+	rtl8xxxu_write32_set(priv, REG_APS_FSMCO, APS_FSMCO_WLON_RESET);
+
+	/* turn off MAC by HW state machine */
+	rtl8xxxu_write16_set(priv, REG_APS_FSMCO, APS_FSMCO_MAC_OFF);
+
+	for (count = RTL8XXXU_MAX_REG_POLL; count; count--) {
+		val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO);
+		if ((val32 & APS_FSMCO_MAC_OFF) == 0)
+			break;
+
+		udelay(10);
+	}
+
+	if (!count)
+		return -EBUSY;
+
+	/* analog Ips to digital, 1:isolation */
+	rtl8xxxu_write8_set(priv, REG_SYS_ISO_CTRL, SYS_ISO_ANALOG_IPS);
+
+	/* disable LDOA12 MACRO block */
+	rtl8xxxu_write8_clear(priv, REG_LDOA15_CTRL, LDOA15_ENABLE);
+
+	return 0;
+}
+
+static int rtl8192fu_emu_to_disabled(struct rtl8xxxu_priv *priv)
+{
+	u16 val16;
+
+	/* SOP option to disable BG/MB */
+	rtl8xxxu_write8(priv, REG_APS_FSMCO + 3, 0x20);
+
+	/* 0x04[12:11] = 2b'01 enable WL suspend */
+	val16 = rtl8xxxu_read16(priv, REG_APS_FSMCO);
+	val16 &= ~APS_FSMCO_PCIE;
+	val16 |= APS_FSMCO_HW_SUSPEND;
+	rtl8xxxu_write16(priv, REG_APS_FSMCO, val16);
+
+	/* enable GPIO9 as EXT WAKEUP */
+	rtl8xxxu_write32_set(priv, REG_GPIO_INTM, BIT(16));
+
+	return 0;
+}
+
+static int rtl8192fu_active_to_lps(struct rtl8xxxu_priv *priv)
+{
+	struct device *dev = &priv->udev->dev;
+	u16 val16;
+	u32 val32;
+	int retry;
+
+	/* Tx Pause */
+	rtl8xxxu_write8(priv, REG_TXPAUSE, 0xff);
+
+	retry = 100;
+
+	/* Poll 32 bit wide REG_SCH_TX_CMD for 0 to ensure no TX is pending. */
+	do {
+		val32 = rtl8xxxu_read32(priv, REG_SCH_TX_CMD);
+		if (!val32)
+			break;
+
+		udelay(10);
+	} while (retry--);
+
+	if (!retry) {
+		dev_warn(dev, "%s: Failed to flush TX queue\n", __func__);
+		return -EBUSY;
+	}
+
+	/* Disable CCK and OFDM, clock gated */
+	rtl8xxxu_write8_clear(priv, REG_SYS_FUNC, SYS_FUNC_BBRSTB);
+
+	udelay(2);
+
+	/* Whole BB is reset */
+	rtl8xxxu_write8_clear(priv, REG_SYS_FUNC, SYS_FUNC_BB_GLB_RSTN);
+
+	/* Reset MAC TRX */
+	val16 = rtl8xxxu_read16(priv, REG_CR);
+	val16 &= 0xff00;
+	val16 |= CR_HCI_RXDMA_ENABLE | CR_HCI_TXDMA_ENABLE;
+	val16 &= ~CR_SECURITY_ENABLE;
+	rtl8xxxu_write16(priv, REG_CR, val16);
+
+	/* Respond TxOK to scheduler */
+	rtl8xxxu_write8_set(priv, REG_DUAL_TSF_RST, DUAL_TSF_TX_OK);
+
+	return 0;
+}
+
+static int rtl8192fu_power_on(struct rtl8xxxu_priv *priv)
+{
+	u16 val16;
+	int ret;
+
+	rtl8xxxu_write8(priv, REG_USB_ACCESS_TIMEOUT, 0x80);
+
+	rtl8192fu_disabled_to_emu(priv);
+
+	ret = rtl8192fu_emu_to_active(priv);
+	if (ret)
+		return ret;
+
+	rtl8xxxu_write16(priv, REG_CR, 0);
+
+	val16 = rtl8xxxu_read16(priv, REG_CR);
+
+	val16 |= CR_HCI_TXDMA_ENABLE | CR_HCI_RXDMA_ENABLE |
+		 CR_TXDMA_ENABLE | CR_RXDMA_ENABLE |
+		 CR_PROTOCOL_ENABLE | CR_SCHEDULE_ENABLE |
+		 CR_SECURITY_ENABLE | CR_CALTIMER_ENABLE;
+	rtl8xxxu_write16(priv, REG_CR, val16);
+
+	return 0;
+}
+
+static void rtl8192fu_power_off(struct rtl8xxxu_priv *priv)
+{
+	rtl8xxxu_flush_fifo(priv);
+
+	/* Stop Tx Report Timer. 0x4EC[Bit1]=b'0 */
+	rtl8xxxu_write8_clear(priv, REG_TX_REPORT_CTRL,
+			      TX_REPORT_CTRL_TIMER_ENABLE);
+
+	/* stop rx */
+	rtl8xxxu_write8(priv, REG_CR, 0x00);
+
+	rtl8192fu_active_to_lps(priv);
+
+	/* Reset Firmware if running in RAM */
+	if (rtl8xxxu_read8(priv, REG_MCU_FW_DL) & MCU_FW_RAM_SEL)
+		rtl8xxxu_firmware_self_reset(priv);
+
+	/* Reset MCU */
+	rtl8xxxu_write16_clear(priv, REG_SYS_FUNC, SYS_FUNC_CPU_ENABLE);
+
+	/* Reset MCU ready status */
+	rtl8xxxu_write8(priv, REG_MCU_FW_DL, 0x00);
+
+	rtl8192fu_active_to_emu(priv);
+	rtl8192fu_emu_to_disabled(priv);
+}
+
+static void rtl8192f_reset_8051(struct rtl8xxxu_priv *priv)
+{
+	rtl8xxxu_write8_clear(priv, REG_RSV_CTRL, BIT(1));
+
+	rtl8xxxu_write8_clear(priv, REG_RSV_CTRL + 1, BIT(0));
+
+	rtl8xxxu_write16_clear(priv, REG_SYS_FUNC, SYS_FUNC_CPU_ENABLE);
+
+	rtl8xxxu_write8_clear(priv, REG_RSV_CTRL, BIT(1));
+
+	rtl8xxxu_write8_set(priv, REG_RSV_CTRL + 1, BIT(0));
+
+	rtl8xxxu_write16_set(priv, REG_SYS_FUNC, SYS_FUNC_CPU_ENABLE);
+}
+
+static void rtl8192f_enable_rf(struct rtl8xxxu_priv *priv)
+{
+	u32 val32;
+
+	rtl8xxxu_write8(priv, REG_RF_CTRL, RF_ENABLE | RF_RSTB | RF_SDMRSTB);
+
+	val32 = rtl8xxxu_read32(priv, REG_OFDM0_TRX_PATH_ENABLE);
+	val32 &= ~(OFDM_RF_PATH_RX_MASK | OFDM_RF_PATH_TX_MASK);
+	val32 |= OFDM_RF_PATH_RX_A | OFDM_RF_PATH_RX_B |
+		 OFDM_RF_PATH_TX_A | OFDM_RF_PATH_TX_B;
+	rtl8xxxu_write32(priv, REG_OFDM0_TRX_PATH_ENABLE, val32);
+
+	rtl8xxxu_write8(priv, REG_TXPAUSE, 0x00);
+}
+
+static void rtl8192f_disable_rf(struct rtl8xxxu_priv *priv)
+{
+	u32 val32;
+
+	val32 = rtl8xxxu_read32(priv, REG_OFDM0_TRX_PATH_ENABLE);
+	val32 &= ~OFDM_RF_PATH_TX_MASK;
+	rtl8xxxu_write32(priv, REG_OFDM0_TRX_PATH_ENABLE, val32);
+
+	/* Power down RF module */
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_AC, 0);
+}
+
+static void rtl8192f_usb_quirks(struct rtl8xxxu_priv *priv)
+{
+	u16 val16;
+
+	rtl8xxxu_gen2_usb_quirks(priv);
+
+	val16 = rtl8xxxu_read16(priv, REG_CR);
+	val16 |= (CR_MAC_TX_ENABLE | CR_MAC_RX_ENABLE);
+	rtl8xxxu_write16(priv, REG_CR, val16);
+}
+
+#define XTAL1	GENMASK(6, 1)
+#define XTAL0	GENMASK(30, 25)
+
+static void rtl8192f_set_crystal_cap(struct rtl8xxxu_priv *priv, u8 crystal_cap)
+{
+	struct rtl8xxxu_cfo_tracking *cfo = &priv->cfo_tracking;
+	u32 xtal1, xtal0;
+
+	if (crystal_cap == cfo->crystal_cap)
+		return;
+
+	xtal1 = rtl8xxxu_read32(priv, REG_AFE_PLL_CTRL);
+	xtal0 = rtl8xxxu_read32(priv, REG_AFE_XTAL_CTRL);
+
+	dev_dbg(&priv->udev->dev,
+		"%s: Adjusting crystal cap from 0x%x (actually 0x%x 0x%x) to 0x%x\n",
+		__func__,
+		cfo->crystal_cap,
+		u32_get_bits(xtal1, XTAL1),
+		u32_get_bits(xtal0, XTAL0),
+		crystal_cap);
+
+	u32p_replace_bits(&xtal1, crystal_cap, XTAL1);
+	u32p_replace_bits(&xtal0, crystal_cap, XTAL0);
+	rtl8xxxu_write32(priv, REG_AFE_PLL_CTRL, xtal1);
+	rtl8xxxu_write32(priv, REG_AFE_XTAL_CTRL, xtal0);
+
+	cfo->crystal_cap = crystal_cap;
+}
+
+static s8 rtl8192f_cck_rssi(struct rtl8xxxu_priv *priv, struct rtl8723au_phy_stats *phy_stats)
+{
+	struct jaguar2_phy_stats_type0 *phy_stats0 = (struct jaguar2_phy_stats_type0 *)phy_stats;
+	u8 lna_idx = (phy_stats0->lna_h << 3) | phy_stats0->lna_l;
+	u8 vga_idx = phy_stats0->vga;
+	s8 rx_pwr_all;
+
+	switch (lna_idx) {
+	case 7:
+		rx_pwr_all = -44 - (2 * vga_idx);
+		break;
+	case 5:
+		rx_pwr_all = -28 - (2 * vga_idx);
+		break;
+	case 3:
+		rx_pwr_all = -10 - (2 * vga_idx);
+		break;
+	case 0:
+		rx_pwr_all = 14 - (2 * vga_idx);
+		break;
+	default:
+		rx_pwr_all = 0;
+		break;
+	}
+
+	return rx_pwr_all;
+}
+
+static int rtl8192fu_led_brightness_set(struct led_classdev *led_cdev,
+					enum led_brightness brightness)
+{
+	struct rtl8xxxu_priv *priv = container_of(led_cdev,
+						  struct rtl8xxxu_priv,
+						  led_cdev);
+	u16 ledcfg;
+
+	/* Values obtained by observing the USB traffic from the Windows driver. */
+	rtl8xxxu_write32(priv, REG_SW_GPIO_SHARE_CTRL_0, 0x20080);
+	rtl8xxxu_write32(priv, REG_SW_GPIO_SHARE_CTRL_1, 0x1b0000);
+
+	ledcfg = rtl8xxxu_read16(priv, REG_LEDCFG0);
+
+	if (brightness == LED_OFF) {
+		/* Value obtained like above. */
+		ledcfg = BIT(1) | BIT(7);
+	} else if (brightness == LED_ON) {
+		/* Value obtained like above. */
+		ledcfg = BIT(1) | BIT(7) | BIT(11);
+	} else if (brightness == RTL8XXXU_HW_LED_CONTROL) {
+		/* Value obtained by brute force. */
+		ledcfg = BIT(8) | BIT(9);
+	}
+
+	rtl8xxxu_write16(priv, REG_LEDCFG0, ledcfg);
+
+	return 0;
+}
+
+struct rtl8xxxu_fileops rtl8192fu_fops = {
+	.identify_chip = rtl8192fu_identify_chip,
+	.parse_efuse = rtl8192fu_parse_efuse,
+	.load_firmware = rtl8192fu_load_firmware,
+	.power_on = rtl8192fu_power_on,
+	.power_off = rtl8192fu_power_off,
+	.read_efuse = rtl8xxxu_read_efuse,
+	.reset_8051 = rtl8192f_reset_8051,
+	.llt_init = rtl8xxxu_auto_llt_table,
+	.init_phy_bb = rtl8192fu_init_phy_bb,
+	.init_phy_rf = rtl8192fu_init_phy_rf,
+	.phy_lc_calibrate = rtl8192f_phy_lc_calibrate,
+	.phy_iq_calibrate = rtl8192fu_phy_iq_calibrate,
+	.config_channel = rtl8192fu_config_channel,
+	.parse_rx_desc = rtl8xxxu_parse_rxdesc24,
+	.parse_phystats = jaguar2_rx_parse_phystats,
+	.init_aggregation = rtl8192fu_init_aggregation,
+	.init_burst = rtl8xxxu_init_burst,
+	.enable_rf = rtl8192f_enable_rf,
+	.disable_rf = rtl8192f_disable_rf,
+	.usb_quirks = rtl8192f_usb_quirks,
+	.set_tx_power = rtl8192f_set_tx_power,
+	.update_rate_mask = rtl8xxxu_gen2_update_rate_mask,
+	.report_connect = rtl8xxxu_gen2_report_connect,
+	.report_rssi = rtl8xxxu_gen2_report_rssi,
+	.fill_txdesc = rtl8xxxu_fill_txdesc_v2,
+	.set_crystal_cap = rtl8192f_set_crystal_cap,
+	.cck_rssi = rtl8192f_cck_rssi,
+	.led_classdev_brightness_set = rtl8192fu_led_brightness_set,
+	.writeN_block_size = 254,
+	.rx_desc_size = sizeof(struct rtl8xxxu_rxdesc24),
+	.tx_desc_size = sizeof(struct rtl8xxxu_txdesc40),
+	.has_tx_report = 1,
+	.gen2_thermal_meter = 1,
+	.needs_full_init = 1,
+	.init_reg_rxfltmap = 1,
+	.init_reg_pkt_life_time = 1,
+	.init_reg_hmtfr = 1,
+	.ampdu_max_time = 0x5e,
+	.ustime_tsf_edca = 0x50,
+	.max_aggr_num = 0x1f1f,
+	.supports_ap = 1,
+	.max_macid_num = 128,
+	.trxff_boundary = 0x3f3f,
+	.pbp_rx = PBP_PAGE_SIZE_256,
+	.pbp_tx = PBP_PAGE_SIZE_256,
+	.mactable = rtl8192f_mac_init_table,
+	.total_page_num = TX_TOTAL_PAGE_NUM_8192F,
+	.page_num_hi = TX_PAGE_NUM_HI_PQ_8192F,
+	.page_num_lo = TX_PAGE_NUM_LO_PQ_8192F,
+	.page_num_norm = TX_PAGE_NUM_NORM_PQ_8192F,
+};
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8710b.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8710b.c
new file mode 100644
index 0000000000..871b8cca8a
--- /dev/null
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8710b.c
@@ -0,0 +1,1890 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * RTL8XXXU mac80211 USB driver - 8710bu aka 8188gu specific subdriver
+ *
+ * Copyright (c) 2023 Bitterblue Smith <rtl8821cerfe2@gmail.com>
+ *
+ * Portions copied from existing rtl8xxxu code:
+ * Copyright (c) 2014 - 2017 Jes Sorensen <Jes.Sorensen@gmail.com>
+ *
+ * Portions, notably calibration code:
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <linux/usb.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/wireless.h>
+#include <linux/firmware.h>
+#include <linux/moduleparam.h>
+#include <net/mac80211.h>
+#include "rtl8xxxu.h"
+#include "rtl8xxxu_regs.h"
+
+static const struct rtl8xxxu_reg8val rtl8710b_mac_init_table[] = {
+	{0x421, 0x0F}, {0x428, 0x0A}, {0x429, 0x10}, {0x430, 0x00},
+	{0x431, 0x00}, {0x432, 0x00}, {0x433, 0x01}, {0x434, 0x04},
+	{0x435, 0x05}, {0x436, 0x07}, {0x437, 0x08}, {0x43C, 0x04},
+	{0x43D, 0x05}, {0x43E, 0x07}, {0x43F, 0x08}, {0x440, 0x5D},
+	{0x441, 0x01}, {0x442, 0x00}, {0x444, 0x10}, {0x445, 0x00},
+	{0x446, 0x00}, {0x447, 0x00}, {0x448, 0x00}, {0x449, 0xF0},
+	{0x44A, 0x0F}, {0x44B, 0x3E}, {0x44C, 0x10}, {0x44D, 0x00},
+	{0x44E, 0x00}, {0x44F, 0x00}, {0x450, 0x00}, {0x451, 0xF0},
+	{0x452, 0x0F}, {0x453, 0x00}, {0x456, 0x5E}, {0x460, 0x66},
+	{0x461, 0x66}, {0x4C8, 0xFF}, {0x4C9, 0x08}, {0x4CC, 0xFF},
+	{0x4CD, 0xFF}, {0x4CE, 0x01}, {0x500, 0x26}, {0x501, 0xA2},
+	{0x502, 0x2F}, {0x503, 0x00}, {0x504, 0x28}, {0x505, 0xA3},
+	{0x506, 0x5E}, {0x507, 0x00}, {0x508, 0x2B}, {0x509, 0xA4},
+	{0x50A, 0x5E}, {0x50B, 0x00}, {0x50C, 0x4F}, {0x50D, 0xA4},
+	{0x50E, 0x00}, {0x50F, 0x00}, {0x512, 0x1C}, {0x514, 0x0A},
+	{0x516, 0x0A}, {0x525, 0x4F}, {0x550, 0x10}, {0x551, 0x10},
+	{0x559, 0x02}, {0x55C, 0x28}, {0x55D, 0xFF}, {0x605, 0x30},
+	{0x608, 0x0E}, {0x609, 0x2A}, {0x620, 0xFF}, {0x621, 0xFF},
+	{0x622, 0xFF}, {0x623, 0xFF}, {0x624, 0xFF}, {0x625, 0xFF},
+	{0x626, 0xFF}, {0x627, 0xFF}, {0x638, 0x28}, {0x63C, 0x0A},
+	{0x63D, 0x0A}, {0x63E, 0x0C}, {0x63F, 0x0C}, {0x640, 0x40},
+	{0x642, 0x40}, {0x643, 0x00}, {0x652, 0xC8}, {0x66A, 0xB0},
+	{0x66E, 0x05}, {0x700, 0x21}, {0x701, 0x43}, {0x702, 0x65},
+	{0x703, 0x87}, {0x708, 0x21}, {0x709, 0x43}, {0x70A, 0x65},
+	{0x70B, 0x87},
+	{0xffff, 0xff},
+};
+
+/* If updating the phy init tables, also update rtl8710b_revise_cck_tx_psf(). */
+static const struct rtl8xxxu_reg32val rtl8710bu_qfn48m_u_phy_init_table[] = {
+	{0x800, 0x80045700}, {0x804, 0x00000001},
+	{0x808, 0x00FC8000}, {0x80C, 0x0000000A},
+	{0x810, 0x10001331}, {0x814, 0x020C3D10},
+	{0x818, 0x00200385}, {0x81C, 0x00000000},
+	{0x820, 0x01000100}, {0x824, 0x00390204},
+	{0x828, 0x00000000}, {0x82C, 0x00000000},
+	{0x830, 0x00000000}, {0x834, 0x00000000},
+	{0x838, 0x00000000}, {0x83C, 0x00000000},
+	{0x840, 0x00010000}, {0x844, 0x00000000},
+	{0x848, 0x00000000}, {0x84C, 0x00000000},
+	{0x850, 0x00030000}, {0x854, 0x00000000},
+	{0x858, 0x7E1A569A}, {0x85C, 0x569A569A},
+	{0x860, 0x00000130}, {0x864, 0x20000000},
+	{0x868, 0x00000000}, {0x86C, 0x27272700},
+	{0x870, 0x00050000}, {0x874, 0x25005000},
+	{0x878, 0x00000808}, {0x87C, 0x004F0201},
+	{0x880, 0xB0000B1E}, {0x884, 0x00000007},
+	{0x888, 0x00000000}, {0x88C, 0xCCC400C0},
+	{0x890, 0x00000800}, {0x894, 0xFFFFFFFE},
+	{0x898, 0x40302010}, {0x89C, 0x00706050},
+	{0x900, 0x00000000}, {0x904, 0x00000023},
+	{0x908, 0x00000000}, {0x90C, 0x81121111},
+	{0x910, 0x00000402}, {0x914, 0x00000201},
+	{0x920, 0x18C6318C}, {0x924, 0x0000018C},
+	{0x948, 0x99000000}, {0x94C, 0x00000010},
+	{0x950, 0x00003000}, {0x954, 0x5A880000},
+	{0x958, 0x4BC6D87A}, {0x95C, 0x04EB9B79},
+	{0x96C, 0x00000003}, {0x970, 0x00000000},
+	{0x974, 0x00000000}, {0x978, 0x00000000},
+	{0x97C, 0x13000000}, {0x980, 0x00000000},
+	{0xA00, 0x00D046C8}, {0xA04, 0x80FF800C},
+	{0xA08, 0x84838300}, {0xA0C, 0x2E20100F},
+	{0xA10, 0x9500BB78}, {0xA14, 0x1114D028},
+	{0xA18, 0x00881117}, {0xA1C, 0x89140F00},
+	{0xA20, 0xE82C0001}, {0xA24, 0x64B80C1C},
+	{0xA28, 0x00008810}, {0xA2C, 0x00D30000},
+	{0xA70, 0x101FBF00}, {0xA74, 0x00000007},
+	{0xA78, 0x00000900}, {0xA7C, 0x225B0606},
+	{0xA80, 0x218075B1}, {0xA84, 0x00200000},
+	{0xA88, 0x040C0000}, {0xA8C, 0x12345678},
+	{0xA90, 0xABCDEF00}, {0xA94, 0x001B1B89},
+	{0xA98, 0x00000000}, {0xA9C, 0x80020000},
+	{0xAA0, 0x00000000}, {0xAA4, 0x0000000C},
+	{0xAA8, 0xCA110058}, {0xAAC, 0x01235667},
+	{0xAB0, 0x00000000}, {0xAB4, 0x20201402},
+	{0xB2C, 0x00000000}, {0xC00, 0x48071D40},
+	{0xC04, 0x03A05611}, {0xC08, 0x000000E4},
+	{0xC0C, 0x6C6C6C6C}, {0xC10, 0x18800000},
+	{0xC14, 0x40000100}, {0xC18, 0x08800000},
+	{0xC1C, 0x40000100}, {0xC20, 0x00000000},
+	{0xC24, 0x00000000}, {0xC28, 0x00000000},
+	{0xC2C, 0x00000000}, {0xC30, 0x69E9AC4A},
+	{0xC34, 0x31000040}, {0xC38, 0x21688080},
+	{0xC3C, 0x0000170C}, {0xC40, 0x1F78403F},
+	{0xC44, 0x00010036}, {0xC48, 0xEC020107},
+	{0xC4C, 0x007F037F}, {0xC50, 0x69553420},
+	{0xC54, 0x43BC0094}, {0xC58, 0x00013169},
+	{0xC5C, 0x00250492}, {0xC60, 0x00280A00},
+	{0xC64, 0x7112848B}, {0xC68, 0x47C074FF},
+	{0xC6C, 0x00000036}, {0xC70, 0x2C7F000D},
+	{0xC74, 0x020600DB}, {0xC78, 0x0000001F},
+	{0xC7C, 0x00B91612}, {0xC80, 0x390000E4},
+	{0xC84, 0x11F60000}, {0xC88, 0x1051B75F},
+	{0xC8C, 0x20200109}, {0xC90, 0x00091521},
+	{0xC94, 0x00000000}, {0xC98, 0x00121820},
+	{0xC9C, 0x00007F7F}, {0xCA0, 0x00011000},
+	{0xCA4, 0x800000A0}, {0xCA8, 0x84E6C606},
+	{0xCAC, 0x00000060}, {0xCB0, 0x00000000},
+	{0xCB4, 0x00000000}, {0xCB8, 0x00000000},
+	{0xCBC, 0x28000000}, {0xCC0, 0x1051B75F},
+	{0xCC4, 0x00000109}, {0xCC8, 0x000442D6},
+	{0xCCC, 0x00000000}, {0xCD0, 0x000001C8},
+	{0xCD4, 0x001C8000}, {0xCD8, 0x00000100},
+	{0xCDC, 0x40100000}, {0xCE0, 0x00222220},
+	{0xCE4, 0x10000000}, {0xCE8, 0x37644302},
+	{0xCEC, 0x2F97D40C}, {0xD00, 0x04030740},
+	{0xD04, 0x40020401}, {0xD08, 0x0000907F},
+	{0xD0C, 0x20010201}, {0xD10, 0xA0633333},
+	{0xD14, 0x3333BC53}, {0xD18, 0x7A8F5B6F},
+	{0xD2C, 0xCB979975}, {0xD30, 0x00000000},
+	{0xD34, 0x40608000}, {0xD38, 0x88000000},
+	{0xD3C, 0xC0127353}, {0xD40, 0x00000000},
+	{0xD44, 0x00000000}, {0xD48, 0x00000000},
+	{0xD4C, 0x00000000}, {0xD50, 0x00006528},
+	{0xD54, 0x00000000}, {0xD58, 0x00000282},
+	{0xD5C, 0x30032064}, {0xD60, 0x4653DE68},
+	{0xD64, 0x04518A3C}, {0xD68, 0x00002101},
+	{0xE00, 0x2D2D2D2D}, {0xE04, 0x2D2D2D2D},
+	{0xE08, 0x0390272D}, {0xE10, 0x2D2D2D2D},
+	{0xE14, 0x2D2D2D2D}, {0xE18, 0x2D2D2D2D},
+	{0xE1C, 0x2D2D2D2D}, {0xE28, 0x00000000},
+	{0xE30, 0x1000DC1F}, {0xE34, 0x10008C1F},
+	{0xE38, 0x02140102}, {0xE3C, 0x681604C2},
+	{0xE40, 0x01007C00}, {0xE44, 0x01004800},
+	{0xE48, 0xFB000000}, {0xE4C, 0x000028D1},
+	{0xE50, 0x1000DC1F}, {0xE54, 0x10008C1F},
+	{0xE58, 0x02140102}, {0xE5C, 0x28160D05},
+	{0xE60, 0x0000C008}, {0xE68, 0x001B25A4},
+	{0xE64, 0x281600A0}, {0xE6C, 0x01C00010},
+	{0xE70, 0x01C00010}, {0xE74, 0x02000010},
+	{0xE78, 0x02000010}, {0xE7C, 0x02000010},
+	{0xE80, 0x02000010}, {0xE84, 0x01C00010},
+	{0xE88, 0x02000010}, {0xE8C, 0x01C00010},
+	{0xED0, 0x01C00010}, {0xED4, 0x01C00010},
+	{0xED8, 0x01C00010}, {0xEDC, 0x00000010},
+	{0xEE0, 0x00000010}, {0xEEC, 0x03C00010},
+	{0xF14, 0x00000003}, {0xF00, 0x00100300},
+	{0xF08, 0x0000800B}, {0xF0C, 0x0000F007},
+	{0xF10, 0x0000A487}, {0xF1C, 0x80000064},
+	{0xF38, 0x00030155}, {0xF3C, 0x0000003A},
+	{0xF4C, 0x13000000}, {0xF50, 0x00000000},
+	{0xF18, 0x00000000},
+	{0xffff, 0xffffffff},
+};
+
+/* If updating the phy init tables, also update rtl8710b_revise_cck_tx_psf(). */
+static const struct rtl8xxxu_reg32val rtl8710bu_qfn48m_s_phy_init_table[] = {
+	{0x800, 0x80045700}, {0x804, 0x00000001},
+	{0x808, 0x00FC8000}, {0x80C, 0x0000000A},
+	{0x810, 0x10001331}, {0x814, 0x020C3D10},
+	{0x818, 0x00200385}, {0x81C, 0x00000000},
+	{0x820, 0x01000100}, {0x824, 0x00390204},
+	{0x828, 0x00000000}, {0x82C, 0x00000000},
+	{0x830, 0x00000000}, {0x834, 0x00000000},
+	{0x838, 0x00000000}, {0x83C, 0x00000000},
+	{0x840, 0x00010000}, {0x844, 0x00000000},
+	{0x848, 0x00000000}, {0x84C, 0x00000000},
+	{0x850, 0x00030000}, {0x854, 0x00000000},
+	{0x858, 0x7E1A569A}, {0x85C, 0x569A569A},
+	{0x860, 0x00000130}, {0x864, 0x20000000},
+	{0x868, 0x00000000}, {0x86C, 0x27272700},
+	{0x870, 0x00050000}, {0x874, 0x25005000},
+	{0x878, 0x00000808}, {0x87C, 0x004F0201},
+	{0x880, 0xB0000B1E}, {0x884, 0x00000007},
+	{0x888, 0x00000000}, {0x88C, 0xCCC400C0},
+	{0x890, 0x00000800}, {0x894, 0xFFFFFFFE},
+	{0x898, 0x40302010}, {0x89C, 0x00706050},
+	{0x900, 0x00000000}, {0x904, 0x00000023},
+	{0x908, 0x00000000}, {0x90C, 0x81121111},
+	{0x910, 0x00000402}, {0x914, 0x00000201},
+	{0x920, 0x18C6318C}, {0x924, 0x0000018C},
+	{0x948, 0x99000000}, {0x94C, 0x00000010},
+	{0x950, 0x00003000}, {0x954, 0x5A880000},
+	{0x958, 0x4BC6D87A}, {0x95C, 0x04EB9B79},
+	{0x96C, 0x00000003}, {0x970, 0x00000000},
+	{0x974, 0x00000000}, {0x978, 0x00000000},
+	{0x97C, 0x13000000}, {0x980, 0x00000000},
+	{0xA00, 0x00D046C8}, {0xA04, 0x80FF800C},
+	{0xA08, 0x84838300}, {0xA0C, 0x2A20100F},
+	{0xA10, 0x9500BB78}, {0xA14, 0x1114D028},
+	{0xA18, 0x00881117}, {0xA1C, 0x89140F00},
+	{0xA20, 0xE82C0001}, {0xA24, 0x64B80C1C},
+	{0xA28, 0x00008810}, {0xA2C, 0x00D30000},
+	{0xA70, 0x101FBF00}, {0xA74, 0x00000007},
+	{0xA78, 0x00000900}, {0xA7C, 0x225B0606},
+	{0xA80, 0x218075B1}, {0xA84, 0x00200000},
+	{0xA88, 0x040C0000}, {0xA8C, 0x12345678},
+	{0xA90, 0xABCDEF00}, {0xA94, 0x001B1B89},
+	{0xA98, 0x00000000}, {0xA9C, 0x80020000},
+	{0xAA0, 0x00000000}, {0xAA4, 0x0000000C},
+	{0xAA8, 0xCA110058}, {0xAAC, 0x01235667},
+	{0xAB0, 0x00000000}, {0xAB4, 0x20201402},
+	{0xB2C, 0x00000000}, {0xC00, 0x48071D40},
+	{0xC04, 0x03A05611}, {0xC08, 0x000000E4},
+	{0xC0C, 0x6C6C6C6C}, {0xC10, 0x18800000},
+	{0xC14, 0x40000100}, {0xC18, 0x08800000},
+	{0xC1C, 0x40000100}, {0xC20, 0x00000000},
+	{0xC24, 0x00000000}, {0xC28, 0x00000000},
+	{0xC2C, 0x00000000}, {0xC30, 0x69E9AC4A},
+	{0xC34, 0x31000040}, {0xC38, 0x21688080},
+	{0xC3C, 0x0000170C}, {0xC40, 0x1F78403F},
+	{0xC44, 0x00010036}, {0xC48, 0xEC020107},
+	{0xC4C, 0x007F037F}, {0xC50, 0x69553420},
+	{0xC54, 0x43BC0094}, {0xC58, 0x00013169},
+	{0xC5C, 0x00250492}, {0xC60, 0x00280A00},
+	{0xC64, 0x7112848B}, {0xC68, 0x47C074FF},
+	{0xC6C, 0x00000036}, {0xC70, 0x2C7F000D},
+	{0xC74, 0x020600DB}, {0xC78, 0x0000001F},
+	{0xC7C, 0x00B91612}, {0xC80, 0x390000E4},
+	{0xC84, 0x11F60000}, {0xC88, 0x1051B75F},
+	{0xC8C, 0x20200109}, {0xC90, 0x00091521},
+	{0xC94, 0x00000000}, {0xC98, 0x00121820},
+	{0xC9C, 0x00007F7F}, {0xCA0, 0x00011000},
+	{0xCA4, 0x800000A0}, {0xCA8, 0x84E6C606},
+	{0xCAC, 0x00000060}, {0xCB0, 0x00000000},
+	{0xCB4, 0x00000000}, {0xCB8, 0x00000000},
+	{0xCBC, 0x28000000}, {0xCC0, 0x1051B75F},
+	{0xCC4, 0x00000109}, {0xCC8, 0x000442D6},
+	{0xCCC, 0x00000000}, {0xCD0, 0x000001C8},
+	{0xCD4, 0x001C8000}, {0xCD8, 0x00000100},
+	{0xCDC, 0x40100000}, {0xCE0, 0x00222220},
+	{0xCE4, 0x10000000}, {0xCE8, 0x37644302},
+	{0xCEC, 0x2F97D40C}, {0xD00, 0x04030740},
+	{0xD04, 0x40020401}, {0xD08, 0x0000907F},
+	{0xD0C, 0x20010201}, {0xD10, 0xA0633333},
+	{0xD14, 0x3333BC53}, {0xD18, 0x7A8F5B6F},
+	{0xD2C, 0xCB979975}, {0xD30, 0x00000000},
+	{0xD34, 0x40608000}, {0xD38, 0x88000000},
+	{0xD3C, 0xC0127353}, {0xD40, 0x00000000},
+	{0xD44, 0x00000000}, {0xD48, 0x00000000},
+	{0xD4C, 0x00000000}, {0xD50, 0x00006528},
+	{0xD54, 0x00000000}, {0xD58, 0x00000282},
+	{0xD5C, 0x30032064}, {0xD60, 0x4653DE68},
+	{0xD64, 0x04518A3C}, {0xD68, 0x00002101},
+	{0xE00, 0x2D2D2D2D}, {0xE04, 0x2D2D2D2D},
+	{0xE08, 0x0390272D}, {0xE10, 0x2D2D2D2D},
+	{0xE14, 0x2D2D2D2D}, {0xE18, 0x2D2D2D2D},
+	{0xE1C, 0x2D2D2D2D}, {0xE28, 0x00000000},
+	{0xE30, 0x1000DC1F}, {0xE34, 0x10008C1F},
+	{0xE38, 0x02140102}, {0xE3C, 0x681604C2},
+	{0xE40, 0x01007C00}, {0xE44, 0x01004800},
+	{0xE48, 0xFB000000}, {0xE4C, 0x000028D1},
+	{0xE50, 0x1000DC1F}, {0xE54, 0x10008C1F},
+	{0xE58, 0x02140102}, {0xE5C, 0x28160D05},
+	{0xE60, 0x0000C008}, {0xE68, 0x001B25A4},
+	{0xE64, 0x281600A0}, {0xE6C, 0x01C00010},
+	{0xE70, 0x01C00010}, {0xE74, 0x02000010},
+	{0xE78, 0x02000010}, {0xE7C, 0x02000010},
+	{0xE80, 0x02000010}, {0xE84, 0x01C00010},
+	{0xE88, 0x02000010}, {0xE8C, 0x01C00010},
+	{0xED0, 0x01C00010}, {0xED4, 0x01C00010},
+	{0xED8, 0x01C00010}, {0xEDC, 0x00000010},
+	{0xEE0, 0x00000010}, {0xEEC, 0x03C00010},
+	{0xF14, 0x00000003}, {0xF00, 0x00100300},
+	{0xF08, 0x0000800B}, {0xF0C, 0x0000F007},
+	{0xF10, 0x0000A487}, {0xF1C, 0x80000064},
+	{0xF38, 0x00030155}, {0xF3C, 0x0000003A},
+	{0xF4C, 0x13000000}, {0xF50, 0x00000000},
+	{0xF18, 0x00000000},
+	{0xffff, 0xffffffff},
+};
+
+static const struct rtl8xxxu_reg32val rtl8710b_agc_table[] = {
+	{0xC78, 0xFC000001}, {0xC78, 0xFB010001},
+	{0xC78, 0xFA020001}, {0xC78, 0xF9030001},
+	{0xC78, 0xF8040001}, {0xC78, 0xF7050001},
+	{0xC78, 0xF6060001}, {0xC78, 0xF5070001},
+	{0xC78, 0xF4080001}, {0xC78, 0xF3090001},
+	{0xC78, 0xF20A0001}, {0xC78, 0xF10B0001},
+	{0xC78, 0xF00C0001}, {0xC78, 0xEF0D0001},
+	{0xC78, 0xEE0E0001}, {0xC78, 0xED0F0001},
+	{0xC78, 0xEC100001}, {0xC78, 0xEB110001},
+	{0xC78, 0xEA120001}, {0xC78, 0xE9130001},
+	{0xC78, 0xE8140001}, {0xC78, 0xE7150001},
+	{0xC78, 0xE6160001}, {0xC78, 0xE5170001},
+	{0xC78, 0xE4180001}, {0xC78, 0xE3190001},
+	{0xC78, 0xE21A0001}, {0xC78, 0xE11B0001},
+	{0xC78, 0xE01C0001}, {0xC78, 0xC31D0001},
+	{0xC78, 0xC21E0001}, {0xC78, 0xC11F0001},
+	{0xC78, 0xC0200001}, {0xC78, 0xA3210001},
+	{0xC78, 0xA2220001}, {0xC78, 0xA1230001},
+	{0xC78, 0xA0240001}, {0xC78, 0x86250001},
+	{0xC78, 0x85260001}, {0xC78, 0x84270001},
+	{0xC78, 0x83280001}, {0xC78, 0x82290001},
+	{0xC78, 0x812A0001}, {0xC78, 0x802B0001},
+	{0xC78, 0x632C0001}, {0xC78, 0x622D0001},
+	{0xC78, 0x612E0001}, {0xC78, 0x602F0001},
+	{0xC78, 0x42300001}, {0xC78, 0x41310001},
+	{0xC78, 0x40320001}, {0xC78, 0x23330001},
+	{0xC78, 0x22340001}, {0xC78, 0x21350001},
+	{0xC78, 0x20360001}, {0xC78, 0x02370001},
+	{0xC78, 0x01380001}, {0xC78, 0x00390001},
+	{0xC78, 0x003A0001}, {0xC78, 0x003B0001},
+	{0xC78, 0x003C0001}, {0xC78, 0x003D0001},
+	{0xC78, 0x003E0001}, {0xC78, 0x003F0001},
+	{0xC78, 0xF7400001}, {0xC78, 0xF7410001},
+	{0xC78, 0xF7420001}, {0xC78, 0xF7430001},
+	{0xC78, 0xF7440001}, {0xC78, 0xF7450001},
+	{0xC78, 0xF7460001}, {0xC78, 0xF7470001},
+	{0xC78, 0xF7480001}, {0xC78, 0xF6490001},
+	{0xC78, 0xF34A0001}, {0xC78, 0xF24B0001},
+	{0xC78, 0xF14C0001}, {0xC78, 0xF04D0001},
+	{0xC78, 0xD14E0001}, {0xC78, 0xD04F0001},
+	{0xC78, 0xB5500001}, {0xC78, 0xB4510001},
+	{0xC78, 0xB3520001}, {0xC78, 0xB2530001},
+	{0xC78, 0xB1540001}, {0xC78, 0xB0550001},
+	{0xC78, 0xAF560001}, {0xC78, 0xAE570001},
+	{0xC78, 0xAD580001}, {0xC78, 0xAC590001},
+	{0xC78, 0xAB5A0001}, {0xC78, 0xAA5B0001},
+	{0xC78, 0xA95C0001}, {0xC78, 0xA85D0001},
+	{0xC78, 0xA75E0001}, {0xC78, 0xA65F0001},
+	{0xC78, 0xA5600001}, {0xC78, 0xA4610001},
+	{0xC78, 0xA3620001}, {0xC78, 0xA2630001},
+	{0xC78, 0xA1640001}, {0xC78, 0xA0650001},
+	{0xC78, 0x87660001}, {0xC78, 0x86670001},
+	{0xC78, 0x85680001}, {0xC78, 0x84690001},
+	{0xC78, 0x836A0001}, {0xC78, 0x826B0001},
+	{0xC78, 0x816C0001}, {0xC78, 0x806D0001},
+	{0xC78, 0x636E0001}, {0xC78, 0x626F0001},
+	{0xC78, 0x61700001}, {0xC78, 0x60710001},
+	{0xC78, 0x42720001}, {0xC78, 0x41730001},
+	{0xC78, 0x40740001}, {0xC78, 0x23750001},
+	{0xC78, 0x22760001}, {0xC78, 0x21770001},
+	{0xC78, 0x20780001}, {0xC78, 0x03790001},
+	{0xC78, 0x027A0001}, {0xC78, 0x017B0001},
+	{0xC78, 0x007C0001}, {0xC78, 0x007D0001},
+	{0xC78, 0x007E0001}, {0xC78, 0x007F0001},
+	{0xC50, 0x69553422}, {0xC50, 0x69553420},
+	{0xffff, 0xffffffff}
+};
+
+static const struct rtl8xxxu_rfregval rtl8710bu_qfn48m_u_radioa_init_table[] = {
+	{0x00, 0x00030000}, {0x08, 0x00008400},
+	{0x17, 0x00000000}, {0x18, 0x00000C01},
+	{0x19, 0x000739D2}, {0x1C, 0x00000C4C},
+	{0x1B, 0x00000C6C}, {0x1E, 0x00080009},
+	{0x1F, 0x00000880}, {0x2F, 0x0001A060},
+	{0x3F, 0x00015000}, {0x42, 0x000060C0},
+	{0x57, 0x000D0000}, {0x58, 0x000C0160},
+	{0x67, 0x00001552}, {0x83, 0x00000000},
+	{0xB0, 0x000FF9F0}, {0xB1, 0x00010018},
+	{0xB2, 0x00054C00}, {0xB4, 0x0004486B},
+	{0xB5, 0x0000112A}, {0xB6, 0x0000053E},
+	{0xB7, 0x00014408}, {0xB8, 0x00010200},
+	{0xB9, 0x00080801}, {0xBA, 0x00040001},
+	{0xBB, 0x00000400}, {0xBF, 0x000C0000},
+	{0xC2, 0x00002400}, {0xC3, 0x00000009},
+	{0xC4, 0x00040C91}, {0xC5, 0x00099999},
+	{0xC6, 0x000000A3}, {0xC7, 0x00088820},
+	{0xC8, 0x00076C06}, {0xC9, 0x00000000},
+	{0xCA, 0x00080000}, {0xDF, 0x00000180},
+	{0xEF, 0x000001A8}, {0x3D, 0x00000003},
+	{0x3D, 0x00080003}, {0x51, 0x000F1E69},
+	{0x52, 0x000FBF6C}, {0x53, 0x0000032F},
+	{0x54, 0x00055007}, {0x56, 0x000517F0},
+	{0x35, 0x000000F4}, {0x35, 0x00000179},
+	{0x35, 0x000002F4}, {0x36, 0x00000BF8},
+	{0x36, 0x00008BF8}, {0x36, 0x00010BF8},
+	{0x36, 0x00018BF8}, {0x18, 0x00000C01},
+	{0x5A, 0x00048000}, {0x5A, 0x00048000},
+	{0x34, 0x0000ADF5}, {0x34, 0x00009DF2},
+	{0x34, 0x00008DEF}, {0x34, 0x00007DEC},
+	{0x34, 0x00006DE9}, {0x34, 0x00005CEC},
+	{0x34, 0x00004CE9}, {0x34, 0x00003C6C},
+	{0x34, 0x00002C69}, {0x34, 0x0000106E},
+	{0x34, 0x0000006B}, {0x84, 0x00048000},
+	{0x87, 0x00000065}, {0x8E, 0x00065540},
+	{0xDF, 0x00000110}, {0x86, 0x0000002A},
+	{0x8F, 0x00088000}, {0x81, 0x0003FD80},
+	{0xEF, 0x00082000}, {0x3B, 0x000F0F00},
+	{0x3B, 0x000E0E00}, {0x3B, 0x000DFE00},
+	{0x3B, 0x000C0D00}, {0x3B, 0x000B0C00},
+	{0x3B, 0x000A0500}, {0x3B, 0x00090400},
+	{0x3B, 0x00080000}, {0x3B, 0x00070F00},
+	{0x3B, 0x00060E00}, {0x3B, 0x00050A00},
+	{0x3B, 0x00040D00}, {0x3B, 0x00030C00},
+	{0x3B, 0x00020500}, {0x3B, 0x00010400},
+	{0x3B, 0x00000000}, {0xEF, 0x00080000},
+	{0xEF, 0x00088000}, {0x3B, 0x00000170},
+	{0x3B, 0x000C0030}, {0xEF, 0x00080000},
+	{0xEF, 0x00080000}, {0x30, 0x00010000},
+	{0x31, 0x0000000F}, {0x32, 0x00047EFE},
+	{0xEF, 0x00000000}, {0x00, 0x00010159},
+	{0x18, 0x0000FC01}, {0xFE, 0x00000000},
+	{0x00, 0x00033D95},
+	{0xff, 0xffffffff}
+};
+
+static const struct rtl8xxxu_rfregval rtl8710bu_qfn48m_s_radioa_init_table[] = {
+	{0x00, 0x00030000}, {0x08, 0x00008400},
+	{0x17, 0x00000000}, {0x18, 0x00000C01},
+	{0x19, 0x000739D2}, {0x1C, 0x00000C4C},
+	{0x1B, 0x00000C6C}, {0x1E, 0x00080009},
+	{0x1F, 0x00000880}, {0x2F, 0x0001A060},
+	{0x3F, 0x00015000}, {0x42, 0x000060C0},
+	{0x57, 0x000D0000}, {0x58, 0x000C0160},
+	{0x67, 0x00001552}, {0x83, 0x00000000},
+	{0xB0, 0x000FF9F0}, {0xB1, 0x00010018},
+	{0xB2, 0x00054C00}, {0xB4, 0x0004486B},
+	{0xB5, 0x0000112A}, {0xB6, 0x0000053E},
+	{0xB7, 0x00014408}, {0xB8, 0x00010200},
+	{0xB9, 0x00080801}, {0xBA, 0x00040001},
+	{0xBB, 0x00000400}, {0xBF, 0x000C0000},
+	{0xC2, 0x00002400}, {0xC3, 0x00000009},
+	{0xC4, 0x00040C91}, {0xC5, 0x00099999},
+	{0xC6, 0x000000A3}, {0xC7, 0x00088820},
+	{0xC8, 0x00076C06}, {0xC9, 0x00000000},
+	{0xCA, 0x00080000}, {0xDF, 0x00000180},
+	{0xEF, 0x000001A8}, {0x3D, 0x00000003},
+	{0x3D, 0x00080003}, {0x51, 0x000F1E69},
+	{0x52, 0x000FBF6C}, {0x53, 0x0000032F},
+	{0x54, 0x00055007}, {0x56, 0x000517F0},
+	{0x35, 0x000000F4}, {0x35, 0x00000179},
+	{0x35, 0x000002F4}, {0x36, 0x00000BF8},
+	{0x36, 0x00008BF8}, {0x36, 0x00010BF8},
+	{0x36, 0x00018BF8}, {0x18, 0x00000C01},
+	{0x5A, 0x00048000}, {0x5A, 0x00048000},
+	{0x34, 0x0000ADF5}, {0x34, 0x00009DF2},
+	{0x34, 0x00008DEF}, {0x34, 0x00007DEC},
+	{0x34, 0x00006DE9}, {0x34, 0x00005CEC},
+	{0x34, 0x00004CE9}, {0x34, 0x00003C6C},
+	{0x34, 0x00002C69}, {0x34, 0x0000106E},
+	{0x34, 0x0000006B}, {0x84, 0x00048000},
+	{0x87, 0x00000065}, {0x8E, 0x00065540},
+	{0xDF, 0x00000110}, {0x86, 0x0000002A},
+	{0x8F, 0x00088000}, {0x81, 0x0003FD80},
+	{0xEF, 0x00082000}, {0x3B, 0x000F0F00},
+	{0x3B, 0x000E0E00}, {0x3B, 0x000DFE00},
+	{0x3B, 0x000C0D00}, {0x3B, 0x000B0C00},
+	{0x3B, 0x000A0500}, {0x3B, 0x00090400},
+	{0x3B, 0x00080000}, {0x3B, 0x00070F00},
+	{0x3B, 0x00060E00}, {0x3B, 0x00050A00},
+	{0x3B, 0x00040D00}, {0x3B, 0x00030C00},
+	{0x3B, 0x00020500}, {0x3B, 0x00010400},
+	{0x3B, 0x00000000}, {0xEF, 0x00080000},
+	{0xEF, 0x00088000}, {0x3B, 0x000000B0},
+	{0x3B, 0x000C0030}, {0xEF, 0x00080000},
+	{0xEF, 0x00080000}, {0x30, 0x00010000},
+	{0x31, 0x0000000F}, {0x32, 0x00047EFE},
+	{0xEF, 0x00000000}, {0x00, 0x00010159},
+	{0x18, 0x0000FC01}, {0xFE, 0x00000000},
+	{0x00, 0x00033D95},
+	{0xff, 0xffffffff}
+};
+
+static u32 rtl8710b_indirect_read32(struct rtl8xxxu_priv *priv, u32 addr)
+{
+	struct device *dev = &priv->udev->dev;
+	u32 val32, value = 0xffffffff;
+	u8 polling_count = 0xff;
+
+	if (!IS_ALIGNED(addr, 4)) {
+		dev_warn(dev, "%s: Aborting because 0x%x is not a multiple of 4.\n",
+			 __func__, addr);
+		return value;
+	}
+
+	mutex_lock(&priv->syson_indirect_access_mutex);
+
+	rtl8xxxu_write32(priv, REG_USB_HOST_INDIRECT_ADDR_8710B, addr);
+	rtl8xxxu_write32(priv, REG_EFUSE_INDIRECT_CTRL_8710B, NORMAL_REG_READ_OFFSET);
+
+	do
+		val32 = rtl8xxxu_read32(priv, REG_EFUSE_INDIRECT_CTRL_8710B);
+	while ((val32 & BIT(31)) && (--polling_count > 0));
+
+	if (polling_count == 0)
+		dev_warn(dev, "%s: Failed to read from 0x%x, 0x806c = 0x%x\n",
+			 __func__, addr, val32);
+	else
+		value = rtl8xxxu_read32(priv, REG_USB_HOST_INDIRECT_DATA_8710B);
+
+	mutex_unlock(&priv->syson_indirect_access_mutex);
+
+	if (rtl8xxxu_debug & RTL8XXXU_DEBUG_REG_READ)
+		dev_info(dev, "%s(%04x) = 0x%08x\n", __func__, addr, value);
+
+	return value;
+}
+
+static void rtl8710b_indirect_write32(struct rtl8xxxu_priv *priv, u32 addr, u32 val)
+{
+	struct device *dev = &priv->udev->dev;
+	u8 polling_count = 0xff;
+	u32 val32;
+
+	if (!IS_ALIGNED(addr, 4)) {
+		dev_warn(dev, "%s: Aborting because 0x%x is not a multiple of 4.\n",
+			 __func__, addr);
+		return;
+	}
+
+	mutex_lock(&priv->syson_indirect_access_mutex);
+
+	rtl8xxxu_write32(priv, REG_USB_HOST_INDIRECT_ADDR_8710B, addr);
+	rtl8xxxu_write32(priv, REG_USB_HOST_INDIRECT_DATA_8710B, val);
+	rtl8xxxu_write32(priv, REG_EFUSE_INDIRECT_CTRL_8710B, NORMAL_REG_WRITE_OFFSET);
+
+	do
+		val32 = rtl8xxxu_read32(priv, REG_EFUSE_INDIRECT_CTRL_8710B);
+	while ((val32 & BIT(31)) && (--polling_count > 0));
+
+	if (polling_count == 0)
+		dev_warn(dev, "%s: Failed to write 0x%x to 0x%x, 0x806c = 0x%x\n",
+			 __func__, val, addr, val32);
+
+	mutex_unlock(&priv->syson_indirect_access_mutex);
+
+	if (rtl8xxxu_debug & RTL8XXXU_DEBUG_REG_WRITE)
+		dev_info(dev, "%s(%04x) = 0x%08x\n", __func__, addr, val);
+}
+
+static u32 rtl8710b_read_syson_reg(struct rtl8xxxu_priv *priv, u32 addr)
+{
+	return rtl8710b_indirect_read32(priv, addr | SYSON_REG_BASE_ADDR_8710B);
+}
+
+static void rtl8710b_write_syson_reg(struct rtl8xxxu_priv *priv, u32 addr, u32 val)
+{
+	rtl8710b_indirect_write32(priv, addr | SYSON_REG_BASE_ADDR_8710B, val);
+}
+
+static int rtl8710b_read_efuse8(struct rtl8xxxu_priv *priv, u16 offset, u8 *data)
+{
+	u32 val32;
+	int i;
+
+	/* Write Address */
+	rtl8xxxu_write32(priv, REG_USB_HOST_INDIRECT_ADDR_8710B, offset);
+
+	rtl8xxxu_write32(priv, REG_EFUSE_INDIRECT_CTRL_8710B, EFUSE_READ_OFFSET);
+
+	/* Poll for data read */
+	val32 = rtl8xxxu_read32(priv, REG_EFUSE_INDIRECT_CTRL_8710B);
+	for (i = 0; i < RTL8XXXU_MAX_REG_POLL; i++) {
+		val32 = rtl8xxxu_read32(priv, REG_EFUSE_INDIRECT_CTRL_8710B);
+		if (!(val32 & BIT(31)))
+			break;
+	}
+
+	if (i == RTL8XXXU_MAX_REG_POLL)
+		return -EIO;
+
+	val32 = rtl8xxxu_read32(priv, REG_USB_HOST_INDIRECT_DATA_8710B);
+
+	*data = val32 & 0xff;
+	return 0;
+}
+
+#define EEPROM_PACKAGE_TYPE_8710B	0xF8
+#define PACKAGE_QFN48M_U		0xee
+#define PACKAGE_QFN48M_S		0xfe
+
+static int rtl8710bu_identify_chip(struct rtl8xxxu_priv *priv)
+{
+	struct device *dev = &priv->udev->dev;
+	u32 cfg0, cfg2, vendor;
+	u8 package_type = 0x7; /* a nonsense value */
+
+	sprintf(priv->chip_name, "8710BU");
+	priv->rtl_chip = RTL8710B;
+	priv->rf_paths = 1;
+	priv->rx_paths = 1;
+	priv->tx_paths = 1;
+	priv->has_wifi = 1;
+
+	cfg0 = rtl8710b_read_syson_reg(priv, REG_SYS_SYSTEM_CFG0_8710B);
+	priv->chip_cut = cfg0 & 0xf;
+
+	if (cfg0 & BIT(16)) {
+		dev_info(dev, "%s: Unsupported test chip\n", __func__);
+		return -EOPNOTSUPP;
+	}
+
+	vendor = u32_get_bits(cfg0, 0xc0);
+
+	/* SMIC and TSMC are swapped compared to rtl8xxxu_identify_vendor_2bits */
+	switch (vendor) {
+	case 0:
+		sprintf(priv->chip_vendor, "SMIC");
+		priv->vendor_smic = 1;
+		break;
+	case 1:
+		sprintf(priv->chip_vendor, "TSMC");
+		break;
+	case 2:
+		sprintf(priv->chip_vendor, "UMC");
+		priv->vendor_umc = 1;
+		break;
+	default:
+		sprintf(priv->chip_vendor, "unknown");
+		break;
+	}
+
+	rtl8710b_read_efuse8(priv, EEPROM_PACKAGE_TYPE_8710B, &package_type);
+
+	if (package_type == 0xff) {
+		dev_warn(dev, "Package type is undefined. Assuming it based on the vendor.\n");
+
+		if (priv->vendor_umc) {
+			package_type = PACKAGE_QFN48M_U;
+		} else if (priv->vendor_smic) {
+			package_type = PACKAGE_QFN48M_S;
+		} else {
+			dev_warn(dev, "The vendor is neither UMC nor SMIC. Assuming the package type is QFN48M_U.\n");
+
+			/*
+			 * In this case the vendor driver doesn't set
+			 * the package type to anything, which is the
+			 * same as setting it to PACKAGE_DEFAULT (0).
+			 */
+			package_type = PACKAGE_QFN48M_U;
+		}
+	} else if (package_type != PACKAGE_QFN48M_S &&
+		   package_type != PACKAGE_QFN48M_U) {
+		dev_warn(dev, "Failed to read the package type. Assuming it's the default QFN48M_U.\n");
+
+		/*
+		 * In this case the vendor driver actually sets it to
+		 * PACKAGE_DEFAULT, but that selects the same values
+		 * from the init tables as PACKAGE_QFN48M_U.
+		 */
+		package_type = PACKAGE_QFN48M_U;
+	}
+
+	priv->package_type = package_type;
+
+	dev_dbg(dev, "Package type: 0x%x\n", package_type);
+
+	cfg2 = rtl8710b_read_syson_reg(priv, REG_SYS_SYSTEM_CFG2_8710B);
+	priv->rom_rev = cfg2 & 0xf;
+
+	return rtl8xxxu_config_endpoints_no_sie(priv);
+}
+
+static void rtl8710b_revise_cck_tx_psf(struct rtl8xxxu_priv *priv, u8 channel)
+{
+	if (channel == 13) {
+		/* Normal values */
+		rtl8xxxu_write32(priv, REG_CCK0_TX_FILTER2, 0x64B80C1C);
+		rtl8xxxu_write32(priv, REG_CCK0_DEBUG_PORT, 0x00008810);
+		rtl8xxxu_write32(priv, REG_CCK0_TX_FILTER3, 0x01235667);
+		/* Special value for channel 13 */
+		rtl8xxxu_write32(priv, REG_CCK0_TX_FILTER1, 0xd1d80001);
+	} else if (channel == 14) {
+		/* Special values for channel 14 */
+		rtl8xxxu_write32(priv, REG_CCK0_TX_FILTER2, 0x0000B81C);
+		rtl8xxxu_write32(priv, REG_CCK0_DEBUG_PORT, 0x00000000);
+		rtl8xxxu_write32(priv, REG_CCK0_TX_FILTER3, 0x00003667);
+		/* Normal value */
+		rtl8xxxu_write32(priv, REG_CCK0_TX_FILTER1, 0xE82C0001);
+	} else {
+		/* Restore normal values from the phy init table */
+		rtl8xxxu_write32(priv, REG_CCK0_TX_FILTER2, 0x64B80C1C);
+		rtl8xxxu_write32(priv, REG_CCK0_DEBUG_PORT, 0x00008810);
+		rtl8xxxu_write32(priv, REG_CCK0_TX_FILTER3, 0x01235667);
+		rtl8xxxu_write32(priv, REG_CCK0_TX_FILTER1, 0xE82C0001);
+	}
+}
+
+static void rtl8710bu_config_channel(struct ieee80211_hw *hw)
+{
+	struct rtl8xxxu_priv *priv = hw->priv;
+	bool ht40 = conf_is_ht40(&hw->conf);
+	u8 channel, subchannel = 0;
+	bool sec_ch_above = 0;
+	u32 val32;
+	u16 val16;
+
+	channel = (u8)hw->conf.chandef.chan->hw_value;
+
+	if (conf_is_ht40_plus(&hw->conf)) {
+		sec_ch_above = 1;
+		channel += 2;
+		subchannel = 2;
+	} else if (conf_is_ht40_minus(&hw->conf)) {
+		sec_ch_above = 0;
+		channel -= 2;
+		subchannel = 1;
+	}
+
+	/* Set channel */
+	val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_MODE_AG);
+	u32p_replace_bits(&val32, channel, MODE_AG_CHANNEL_MASK);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_MODE_AG, val32);
+
+	rtl8710b_revise_cck_tx_psf(priv, channel);
+
+	/* Set bandwidth mode */
+	val16 = rtl8xxxu_read16(priv, REG_WMAC_TRXPTCL_CTL);
+	val16 &= ~WMAC_TRXPTCL_CTL_BW_MASK;
+	if (ht40)
+		val16 |= WMAC_TRXPTCL_CTL_BW_40;
+	rtl8xxxu_write16(priv, REG_WMAC_TRXPTCL_CTL, val16);
+
+	rtl8xxxu_write8(priv, REG_DATA_SUBCHANNEL, subchannel);
+
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE);
+	u32p_replace_bits(&val32, ht40, FPGA_RF_MODE);
+	rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32);
+
+	val32 = rtl8xxxu_read32(priv, REG_FPGA1_RF_MODE);
+	u32p_replace_bits(&val32, ht40, FPGA_RF_MODE);
+	rtl8xxxu_write32(priv, REG_FPGA1_RF_MODE, val32);
+
+	if (ht40) {
+		/* Set Control channel to upper or lower. */
+		val32 = rtl8xxxu_read32(priv, REG_CCK0_SYSTEM);
+		u32p_replace_bits(&val32, !sec_ch_above, CCK0_SIDEBAND);
+		rtl8xxxu_write32(priv, REG_CCK0_SYSTEM, val32);
+	}
+
+	/* RXADC CLK */
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE);
+	val32 |= GENMASK(10, 8);
+	rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32);
+
+	/* TXDAC CLK */
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE);
+	val32 |= BIT(14) | BIT(12);
+	val32 &= ~BIT(13);
+	rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32);
+
+	/* small BW */
+	val32 = rtl8xxxu_read32(priv, REG_OFDM0_TX_PSDO_NOISE_WEIGHT);
+	val32 &= ~GENMASK(31, 30);
+	rtl8xxxu_write32(priv, REG_OFDM0_TX_PSDO_NOISE_WEIGHT, val32);
+
+	/* adc buffer clk */
+	val32 = rtl8xxxu_read32(priv, REG_OFDM0_TX_PSDO_NOISE_WEIGHT);
+	val32 &= ~BIT(29);
+	val32 |= BIT(28);
+	rtl8xxxu_write32(priv, REG_OFDM0_TX_PSDO_NOISE_WEIGHT, val32);
+
+	/* adc buffer clk */
+	val32 = rtl8xxxu_read32(priv, REG_OFDM0_XA_RX_AFE);
+	val32 &= ~BIT(29);
+	val32 |= BIT(28);
+	rtl8xxxu_write32(priv, REG_OFDM0_XA_RX_AFE, val32);
+
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_XB_RF_INT_OE);
+	val32 &= ~BIT(30);
+	val32 |= BIT(29);
+	rtl8xxxu_write32(priv, REG_FPGA0_XB_RF_INT_OE, val32);
+
+	if (ht40) {
+		val32 = rtl8xxxu_read32(priv, REG_OFDM_RX_DFIR);
+		val32 &= ~BIT(19);
+		rtl8xxxu_write32(priv, REG_OFDM_RX_DFIR, val32);
+
+		val32 = rtl8xxxu_read32(priv, REG_OFDM_RX_DFIR);
+		val32 &= ~GENMASK(23, 20);
+		rtl8xxxu_write32(priv, REG_OFDM_RX_DFIR, val32);
+
+		val32 = rtl8xxxu_read32(priv, REG_OFDM_RX_DFIR);
+		val32 &= ~GENMASK(27, 24);
+		rtl8xxxu_write32(priv, REG_OFDM_RX_DFIR, val32);
+
+		/* RF TRX_BW */
+		val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_MODE_AG);
+		val32 &= ~MODE_AG_BW_MASK;
+		val32 |= MODE_AG_BW_40MHZ_8723B;
+		rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_MODE_AG, val32);
+	} else {
+		val32 = rtl8xxxu_read32(priv, REG_OFDM_RX_DFIR);
+		val32 |= BIT(19);
+		rtl8xxxu_write32(priv, REG_OFDM_RX_DFIR, val32);
+
+		val32 = rtl8xxxu_read32(priv, REG_OFDM_RX_DFIR);
+		val32 &= ~GENMASK(23, 20);
+		val32 |= BIT(23);
+		rtl8xxxu_write32(priv, REG_OFDM_RX_DFIR, val32);
+
+		val32 = rtl8xxxu_read32(priv, REG_OFDM_RX_DFIR);
+		val32 &= ~GENMASK(27, 24);
+		val32 |= BIT(27) | BIT(25);
+		rtl8xxxu_write32(priv, REG_OFDM_RX_DFIR, val32);
+
+		/* RF TRX_BW */
+		val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_MODE_AG);
+		val32 &= ~MODE_AG_BW_MASK;
+		val32 |= MODE_AG_BW_20MHZ_8723B;
+		rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_MODE_AG, val32);
+	}
+}
+
+static void rtl8710bu_init_aggregation(struct rtl8xxxu_priv *priv)
+{
+	u32 agg_rx;
+	u8 agg_ctrl;
+
+	/* RX aggregation */
+	agg_ctrl = rtl8xxxu_read8(priv, REG_TRXDMA_CTRL);
+	agg_ctrl &= ~TRXDMA_CTRL_RXDMA_AGG_EN;
+
+	agg_rx = rtl8xxxu_read32(priv, REG_RXDMA_AGG_PG_TH);
+	agg_rx &= ~RXDMA_USB_AGG_ENABLE;
+	agg_rx &= ~0xFF0F; /* reset agg size and timeout */
+
+	rtl8xxxu_write8(priv, REG_TRXDMA_CTRL, agg_ctrl);
+	rtl8xxxu_write32(priv, REG_RXDMA_AGG_PG_TH, agg_rx);
+}
+
+static void rtl8710bu_init_statistics(struct rtl8xxxu_priv *priv)
+{
+	u32 val32;
+
+	/* Time duration for NHM unit: 4us, 0xc350=200ms */
+	rtl8xxxu_write16(priv, REG_NHM_TIMER_8723B + 2, 0xc350);
+	rtl8xxxu_write16(priv, REG_NHM_TH9_TH10_8723B + 2, 0xffff);
+	rtl8xxxu_write32(priv, REG_NHM_TH3_TO_TH0_8723B, 0xffffff50);
+	rtl8xxxu_write32(priv, REG_NHM_TH7_TO_TH4_8723B, 0xffffffff);
+
+	/* TH8 */
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+	val32 |= 0xff;
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+
+	/* Enable CCK */
+	val32 = rtl8xxxu_read32(priv, REG_NHM_TH9_TH10_8723B);
+	val32 &= ~(BIT(8) | BIT(9) | BIT(10));
+	val32 |= BIT(8);
+	rtl8xxxu_write32(priv, REG_NHM_TH9_TH10_8723B, val32);
+
+	/* Max power amongst all RX antennas */
+	val32 = rtl8xxxu_read32(priv, REG_OFDM0_FA_RSTC);
+	val32 |= BIT(7);
+	rtl8xxxu_write32(priv, REG_OFDM0_FA_RSTC, val32);
+}
+
+static int rtl8710b_read_efuse(struct rtl8xxxu_priv *priv)
+{
+	struct device *dev = &priv->udev->dev;
+	u8 val8, word_mask, header, extheader;
+	u16 efuse_addr, offset;
+	int i, ret = 0;
+	u32 val32;
+
+	val32 = rtl8710b_read_syson_reg(priv, REG_SYS_EEPROM_CTRL0_8710B);
+	priv->boot_eeprom = u32_get_bits(val32, EEPROM_BOOT);
+	priv->has_eeprom = u32_get_bits(val32, EEPROM_ENABLE);
+
+	/* Default value is 0xff */
+	memset(priv->efuse_wifi.raw, 0xff, EFUSE_MAP_LEN);
+
+	efuse_addr = 0;
+	while (efuse_addr < EFUSE_REAL_CONTENT_LEN_8723A) {
+		u16 map_addr;
+
+		ret = rtl8710b_read_efuse8(priv, efuse_addr++, &header);
+		if (ret || header == 0xff)
+			goto exit;
+
+		if ((header & 0x1f) == 0x0f) {	/* extended header */
+			offset = (header & 0xe0) >> 5;
+
+			ret = rtl8710b_read_efuse8(priv, efuse_addr++, &extheader);
+			if (ret)
+				goto exit;
+
+			/* All words disabled */
+			if ((extheader & 0x0f) == 0x0f)
+				continue;
+
+			offset |= ((extheader & 0xf0) >> 1);
+			word_mask = extheader & 0x0f;
+		} else {
+			offset = (header >> 4) & 0x0f;
+			word_mask = header & 0x0f;
+		}
+
+		/* Get word enable value from PG header */
+
+		/* We have 8 bits to indicate validity */
+		map_addr = offset * 8;
+		for (i = 0; i < EFUSE_MAX_WORD_UNIT; i++) {
+			/* Check word enable condition in the section */
+			if (word_mask & BIT(i)) {
+				map_addr += 2;
+				continue;
+			}
+
+			ret = rtl8710b_read_efuse8(priv, efuse_addr++, &val8);
+			if (ret)
+				goto exit;
+			if (map_addr >= EFUSE_MAP_LEN - 1) {
+				dev_warn(dev, "%s: Illegal map_addr (%04x), efuse corrupt!\n",
+					 __func__, map_addr);
+				ret = -EINVAL;
+				goto exit;
+			}
+			priv->efuse_wifi.raw[map_addr++] = val8;
+
+			ret = rtl8710b_read_efuse8(priv, efuse_addr++, &val8);
+			if (ret)
+				goto exit;
+			priv->efuse_wifi.raw[map_addr++] = val8;
+		}
+	}
+
+exit:
+
+	return ret;
+}
+
+static int rtl8710bu_parse_efuse(struct rtl8xxxu_priv *priv)
+{
+	struct rtl8710bu_efuse *efuse = &priv->efuse_wifi.efuse8710bu;
+
+	if (efuse->rtl_id != cpu_to_le16(0x8195))
+		return -EINVAL;
+
+	ether_addr_copy(priv->mac_addr, efuse->mac_addr);
+
+	memcpy(priv->cck_tx_power_index_A, efuse->tx_power_index_A.cck_base,
+	       sizeof(efuse->tx_power_index_A.cck_base));
+
+	memcpy(priv->ht40_1s_tx_power_index_A,
+	       efuse->tx_power_index_A.ht40_base,
+	       sizeof(efuse->tx_power_index_A.ht40_base));
+
+	priv->ofdm_tx_power_diff[0].a = efuse->tx_power_index_A.ht20_ofdm_1s_diff.a;
+	priv->ht20_tx_power_diff[0].a = efuse->tx_power_index_A.ht20_ofdm_1s_diff.b;
+
+	priv->default_crystal_cap = efuse->xtal_k & 0x3f;
+
+	return 0;
+}
+
+static int rtl8710bu_load_firmware(struct rtl8xxxu_priv *priv)
+{
+	if (priv->vendor_smic) {
+		return rtl8xxxu_load_firmware(priv, "rtlwifi/rtl8710bufw_SMIC.bin");
+	} else if (priv->vendor_umc) {
+		return rtl8xxxu_load_firmware(priv, "rtlwifi/rtl8710bufw_UMC.bin");
+	} else {
+		dev_err(&priv->udev->dev, "We have no suitable firmware for this chip.\n");
+		return -1;
+	}
+}
+
+static void rtl8710bu_init_phy_bb(struct rtl8xxxu_priv *priv)
+{
+	const struct rtl8xxxu_reg32val *phy_init_table;
+	u32 val32;
+
+	/* Enable BB and RF */
+	val32 = rtl8xxxu_read32(priv, REG_SYS_FUNC_8710B);
+	val32 |= GENMASK(17, 16) | GENMASK(26, 24);
+	rtl8xxxu_write32(priv, REG_SYS_FUNC_8710B, val32);
+
+	if (priv->package_type == PACKAGE_QFN48M_U)
+		phy_init_table = rtl8710bu_qfn48m_u_phy_init_table;
+	else
+		phy_init_table = rtl8710bu_qfn48m_s_phy_init_table;
+
+	rtl8xxxu_init_phy_regs(priv, phy_init_table);
+
+	rtl8xxxu_init_phy_regs(priv, rtl8710b_agc_table);
+}
+
+static int rtl8710bu_init_phy_rf(struct rtl8xxxu_priv *priv)
+{
+	const struct rtl8xxxu_rfregval *radioa_init_table;
+
+	if (priv->package_type == PACKAGE_QFN48M_U)
+		radioa_init_table = rtl8710bu_qfn48m_u_radioa_init_table;
+	else
+		radioa_init_table = rtl8710bu_qfn48m_s_radioa_init_table;
+
+	return rtl8xxxu_init_phy_rf(priv, radioa_init_table, RF_A);
+}
+
+static int rtl8710bu_iqk_path_a(struct rtl8xxxu_priv *priv, u32 *lok_result)
+{
+	u32 reg_eac, reg_e94, reg_e9c, val32, path_sel_bb;
+	int result = 0;
+
+	path_sel_bb = rtl8xxxu_read32(priv, REG_S0S1_PATH_SWITCH);
+
+	rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x99000000);
+
+	/*
+	 * Leave IQK mode
+	 */
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+	u32p_replace_bits(&val32, 0, 0xffffff00);
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+
+	/*
+	 * Enable path A PA in TX IQK mode
+	 */
+	val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT);
+	val32 |= 0x80000;
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x20000);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0000f);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0x07ff7);
+
+	/* PA,PAD gain adjust */
+	val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_GAIN_CCA);
+	val32 |= BIT(11);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_GAIN_CCA, val32);
+	val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_PAD_TXG);
+	u32p_replace_bits(&val32, 0x1ed, 0x00fff);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_PAD_TXG, val32);
+
+	/* enter IQK mode */
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+	u32p_replace_bits(&val32, 0x808000, 0xffffff00);
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+
+	/* path-A IQK setting */
+	rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x18008c1c);
+	rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x38008c1c);
+
+	rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x821403ff);
+	rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x28160c06);
+
+	/* LO calibration setting */
+	rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x02002911);
+
+	/* One shot, path A LOK & IQK */
+	rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xfa000000);
+	rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000);
+
+	mdelay(10);
+
+	rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, path_sel_bb);
+
+	/*
+	 * Leave IQK mode
+	 */
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+	u32p_replace_bits(&val32, 0, 0xffffff00);
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+
+	val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_GAIN_CCA);
+	val32 &= ~BIT(11);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_GAIN_CCA, val32);
+
+	/* save LOK result */
+	*lok_result = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_TXM_IDAC);
+
+	/* Check failed */
+	reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2);
+	reg_e94 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_A);
+	reg_e9c = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_A);
+
+	if (!(reg_eac & BIT(28)) &&
+	    ((reg_e94 & 0x03ff0000) != 0x01420000) &&
+	    ((reg_e9c & 0x03ff0000) != 0x00420000))
+		result |= 0x01;
+
+	return result;
+}
+
+static int rtl8710bu_rx_iqk_path_a(struct rtl8xxxu_priv *priv, u32 lok_result)
+{
+	u32 reg_ea4, reg_eac, reg_e94, reg_e9c, val32, path_sel_bb, tmp;
+	int result = 0;
+
+	path_sel_bb = rtl8xxxu_read32(priv, REG_S0S1_PATH_SWITCH);
+
+	rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x99000000);
+
+	/*
+	 * Leave IQK mode
+	 */
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+	u32p_replace_bits(&val32, 0, 0xffffff00);
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+
+	/* modify RXIQK mode table */
+	val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT);
+	val32 |= 0x80000;
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x30000);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0000f);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf1173);
+
+	/* PA,PAD gain adjust */
+	val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_GAIN_CCA);
+	val32 |= BIT(11);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_GAIN_CCA, val32);
+	val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_PAD_TXG);
+	u32p_replace_bits(&val32, 0xf, 0x003e0);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_PAD_TXG, val32);
+
+	/*
+	 * Enter IQK mode
+	 */
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+	u32p_replace_bits(&val32, 0x808000, 0xffffff00);
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+
+	/* path-A IQK setting */
+	rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x18008c1c);
+	rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x38008c1c);
+
+	rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x8216129f);
+	rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x28160c00);
+
+	/*
+	 * Tx IQK setting
+	 */
+	rtl8xxxu_write32(priv, REG_TX_IQK, 0x01007c00);
+	rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800);
+
+	/* LO calibration setting */
+	rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x0046a911);
+
+	/* One shot, path A LOK & IQK */
+	rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000);
+	rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000);
+
+	mdelay(10);
+
+	/* Check failed */
+	reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2);
+	reg_e94 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_A);
+	reg_e9c = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_A);
+
+	if (!(reg_eac & BIT(28)) &&
+	    ((reg_e94 & 0x03ff0000) != 0x01420000) &&
+	    ((reg_e9c & 0x03ff0000) != 0x00420000)) {
+		result |= 0x01;
+	} else { /* If TX not OK, ignore RX */
+
+		/* reload RF path */
+		rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, path_sel_bb);
+
+		/*
+		 * Leave IQK mode
+		 */
+		val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+		u32p_replace_bits(&val32, 0, 0xffffff00);
+		rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+
+		val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_GAIN_CCA);
+		val32 &= ~BIT(11);
+		rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_GAIN_CCA, val32);
+
+		return result;
+	}
+
+	val32 = 0x80007c00 | (reg_e94 & 0x3ff0000) | ((reg_e9c & 0x3ff0000) >> 16);
+	rtl8xxxu_write32(priv, REG_TX_IQK, val32);
+
+	/*
+	 * Modify RX IQK mode table
+	 */
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+	u32p_replace_bits(&val32, 0, 0xffffff00);
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+
+	val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT);
+	val32 |= 0x80000;
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x30000);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0000f);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf7ff2);
+
+	/*
+	 * PA, PAD setting
+	 */
+	val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_GAIN_CCA);
+	val32 |= BIT(11);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_GAIN_CCA, val32);
+	val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_PAD_TXG);
+	u32p_replace_bits(&val32, 0x2a, 0x00fff);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_PAD_TXG, val32);
+
+	/*
+	 * Enter IQK mode
+	 */
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+	u32p_replace_bits(&val32, 0x808000, 0xffffff00);
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+
+	/*
+	 * RX IQK setting
+	 */
+	rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800);
+
+	/* path-A IQK setting */
+	rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x38008c1c);
+	rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x18008c1c);
+
+	rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x2816169f);
+
+	/* LO calibration setting */
+	rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x0046a911);
+
+	/* One shot, path A LOK & IQK */
+	rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000);
+	rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000);
+
+	mdelay(10);
+
+	/* reload RF path */
+	rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, path_sel_bb);
+
+	/*
+	 * Leave IQK mode
+	 */
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+	u32p_replace_bits(&val32, 0, 0xffffff00);
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+
+	val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_GAIN_CCA);
+	val32 &= ~BIT(11);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_GAIN_CCA, val32);
+
+	/* reload LOK value */
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXM_IDAC, lok_result);
+
+	/* Check failed */
+	reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2);
+	reg_ea4 = rtl8xxxu_read32(priv, REG_RX_POWER_BEFORE_IQK_A_2);
+
+	tmp = (reg_eac & 0x03ff0000) >> 16;
+	if ((tmp & 0x200) > 0)
+		tmp = 0x400 - tmp;
+
+	if (!(reg_eac & BIT(27)) &&
+	    ((reg_ea4 & 0x03ff0000) != 0x01320000) &&
+	    ((reg_eac & 0x03ff0000) != 0x00360000) &&
+	    (((reg_ea4 & 0x03ff0000) >> 16) < 0x11a) &&
+	    (((reg_ea4 & 0x03ff0000) >> 16) > 0xe6) &&
+	    (tmp < 0x1a))
+		result |= 0x02;
+
+	return result;
+}
+
+static void rtl8710bu_phy_iqcalibrate(struct rtl8xxxu_priv *priv,
+				      int result[][8], int t)
+{
+	struct device *dev = &priv->udev->dev;
+	u32 i, val32, rx_initial_gain, lok_result;
+	u32 path_sel_bb, path_sel_rf;
+	int path_a_ok;
+	int retry = 2;
+	static const u32 adda_regs[RTL8XXXU_ADDA_REGS] = {
+		REG_FPGA0_XCD_SWITCH_CTRL, REG_BLUETOOTH,
+		REG_RX_WAIT_CCA, REG_TX_CCK_RFON,
+		REG_TX_CCK_BBON, REG_TX_OFDM_RFON,
+		REG_TX_OFDM_BBON, REG_TX_TO_RX,
+		REG_TX_TO_TX, REG_RX_CCK,
+		REG_RX_OFDM, REG_RX_WAIT_RIFS,
+		REG_RX_TO_RX, REG_STANDBY,
+		REG_SLEEP, REG_PMPD_ANAEN
+	};
+	static const u32 iqk_mac_regs[RTL8XXXU_MAC_REGS] = {
+		REG_TXPAUSE, REG_BEACON_CTRL,
+		REG_BEACON_CTRL_1, REG_GPIO_MUXCFG
+	};
+	static const u32 iqk_bb_regs[RTL8XXXU_BB_REGS] = {
+		REG_OFDM0_TRX_PATH_ENABLE, REG_OFDM0_TR_MUX_PAR,
+		REG_FPGA0_XCD_RF_SW_CTRL, REG_CONFIG_ANT_A, REG_CONFIG_ANT_B,
+		REG_FPGA0_XAB_RF_SW_CTRL, REG_FPGA0_XA_RF_INT_OE,
+		REG_FPGA0_XB_RF_INT_OE, REG_CCK0_AFE_SETTING
+	};
+
+	/*
+	 * Note: IQ calibration must be performed after loading
+	 *       PHY_REG.txt , and radio_a, radio_b.txt
+	 */
+
+	rx_initial_gain = rtl8xxxu_read32(priv, REG_OFDM0_XA_AGC_CORE1);
+
+	if (t == 0) {
+		/* Save ADDA parameters, turn Path A ADDA on */
+		rtl8xxxu_save_regs(priv, adda_regs, priv->adda_backup,
+				   RTL8XXXU_ADDA_REGS);
+		rtl8xxxu_save_mac_regs(priv, iqk_mac_regs, priv->mac_backup);
+		rtl8xxxu_save_regs(priv, iqk_bb_regs,
+				   priv->bb_backup, RTL8XXXU_BB_REGS);
+	}
+
+	rtl8xxxu_path_adda_on(priv, adda_regs, true);
+
+	if (t == 0) {
+		val32 = rtl8xxxu_read32(priv, REG_FPGA0_XA_HSSI_PARM1);
+		priv->pi_enabled = u32_get_bits(val32, FPGA0_HSSI_PARM1_PI);
+	}
+
+	if (!priv->pi_enabled) {
+		/* Switch BB to PI mode to do IQ Calibration */
+		rtl8xxxu_write32(priv, REG_FPGA0_XA_HSSI_PARM1, 0x01000100);
+		rtl8xxxu_write32(priv, REG_FPGA0_XB_HSSI_PARM1, 0x01000100);
+	}
+
+	/* MAC settings */
+	val32 = rtl8xxxu_read32(priv, REG_TX_PTCL_CTRL);
+	val32 |= 0x00ff0000;
+	rtl8xxxu_write32(priv, REG_TX_PTCL_CTRL, val32);
+
+	/* save RF path */
+	path_sel_bb = rtl8xxxu_read32(priv, REG_S0S1_PATH_SWITCH);
+	path_sel_rf = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_S0S1);
+
+	/* BB setting */
+	val32 = rtl8xxxu_read32(priv, REG_CCK0_AFE_SETTING);
+	val32 |= 0x0f000000;
+	rtl8xxxu_write32(priv, REG_CCK0_AFE_SETTING, val32);
+	rtl8xxxu_write32(priv, REG_RX_WAIT_CCA, 0x03c00010);
+	rtl8xxxu_write32(priv, REG_OFDM0_TRX_PATH_ENABLE, 0x03a05601);
+	rtl8xxxu_write32(priv, REG_OFDM0_TR_MUX_PAR, 0x000800e4);
+	rtl8xxxu_write32(priv, REG_FPGA0_XCD_RF_SW_CTRL, 0x25204000);
+
+	/* IQ calibration setting */
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+	u32p_replace_bits(&val32, 0x808000, 0xffffff00);
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+	rtl8xxxu_write32(priv, REG_TX_IQK, 0x01007c00);
+	rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800);
+
+	for (i = 0; i < retry; i++) {
+		path_a_ok = rtl8710bu_iqk_path_a(priv, &lok_result);
+
+		if (path_a_ok == 0x01) {
+			val32 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_A);
+			result[t][0] = (val32 >> 16) & 0x3ff;
+
+			val32 = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_A);
+			result[t][1] = (val32 >> 16) & 0x3ff;
+			break;
+		} else {
+			result[t][0] = 0x100;
+			result[t][1] = 0x0;
+		}
+	}
+
+	for (i = 0; i < retry; i++) {
+		path_a_ok = rtl8710bu_rx_iqk_path_a(priv, lok_result);
+
+		if (path_a_ok == 0x03) {
+			val32 = rtl8xxxu_read32(priv, REG_RX_POWER_BEFORE_IQK_A_2);
+			result[t][2] = (val32 >> 16) & 0x3ff;
+
+			val32 = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2);
+			result[t][3] = (val32 >> 16) & 0x3ff;
+			break;
+		} else {
+			result[t][2] = 0x100;
+			result[t][3] = 0x0;
+		}
+	}
+
+	if (!path_a_ok)
+		dev_warn(dev, "%s: Path A IQK failed!\n", __func__);
+
+	/* Back to BB mode, load original value */
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+	u32p_replace_bits(&val32, 0, 0xffffff00);
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+
+	if (t == 0)
+		return;
+
+	/* Reload ADDA power saving parameters */
+	rtl8xxxu_restore_regs(priv, adda_regs, priv->adda_backup, RTL8XXXU_ADDA_REGS);
+
+	/* Reload MAC parameters */
+	rtl8xxxu_restore_mac_regs(priv, iqk_mac_regs, priv->mac_backup);
+
+	/* Reload BB parameters */
+	rtl8xxxu_restore_regs(priv, iqk_bb_regs, priv->bb_backup, RTL8XXXU_BB_REGS);
+
+	/* Reload RF path */
+	rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, path_sel_bb);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_S0S1, path_sel_rf);
+
+	/* Restore RX initial gain */
+	val32 = rtl8xxxu_read32(priv, REG_OFDM0_XA_AGC_CORE1);
+	u32p_replace_bits(&val32, 0x50, 0x000000ff);
+	rtl8xxxu_write32(priv, REG_OFDM0_XA_AGC_CORE1, val32);
+	val32 = rtl8xxxu_read32(priv, REG_OFDM0_XA_AGC_CORE1);
+	u32p_replace_bits(&val32, rx_initial_gain & 0xff, 0x000000ff);
+	rtl8xxxu_write32(priv, REG_OFDM0_XA_AGC_CORE1, val32);
+
+	/* Load 0xe30 IQC default value */
+	rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x01008c00);
+	rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x01008c00);
+}
+
+static void rtl8710bu_phy_iq_calibrate(struct rtl8xxxu_priv *priv)
+{
+	struct device *dev = &priv->udev->dev;
+	int result[4][8]; /* last is final result */
+	int i, candidate;
+	bool path_a_ok;
+	s32 reg_e94, reg_e9c, reg_ea4, reg_eac;
+	s32 reg_tmp = 0;
+	bool simu;
+	u32 path_sel_bb;
+
+	/* Save RF path */
+	path_sel_bb = rtl8xxxu_read32(priv, REG_S0S1_PATH_SWITCH);
+
+	memset(result, 0, sizeof(result));
+	candidate = -1;
+
+	path_a_ok = false;
+
+	for (i = 0; i < 3; i++) {
+		rtl8710bu_phy_iqcalibrate(priv, result, i);
+
+		if (i == 1) {
+			simu = rtl8xxxu_gen2_simularity_compare(priv, result, 0, 1);
+			if (simu) {
+				candidate = 0;
+				break;
+			}
+		}
+
+		if (i == 2) {
+			simu = rtl8xxxu_gen2_simularity_compare(priv, result, 0, 2);
+			if (simu) {
+				candidate = 0;
+				break;
+			}
+
+			simu = rtl8xxxu_gen2_simularity_compare(priv, result, 1, 2);
+			if (simu) {
+				candidate = 1;
+			} else {
+				for (i = 0; i < 8; i++)
+					reg_tmp += result[3][i];
+
+				if (reg_tmp)
+					candidate = 3;
+				else
+					candidate = -1;
+			}
+		}
+	}
+
+	if (candidate >= 0) {
+		reg_e94 = result[candidate][0];
+		reg_e9c = result[candidate][1];
+		reg_ea4 = result[candidate][2];
+		reg_eac = result[candidate][3];
+
+		dev_dbg(dev, "%s: candidate is %x\n", __func__, candidate);
+		dev_dbg(dev, "%s: e94=%x e9c=%x ea4=%x eac=%x\n",
+			__func__, reg_e94, reg_e9c, reg_ea4, reg_eac);
+
+		path_a_ok = true;
+
+		if (reg_e94)
+			rtl8xxxu_fill_iqk_matrix_a(priv, path_a_ok, result,
+						   candidate, (reg_ea4 == 0));
+	}
+
+	rtl8xxxu_save_regs(priv, rtl8xxxu_iqk_phy_iq_bb_reg,
+			   priv->bb_recovery_backup, RTL8XXXU_BB_REGS);
+
+	rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, path_sel_bb);
+}
+
+static int rtl8710b_emu_to_active(struct rtl8xxxu_priv *priv)
+{
+	u8 val8;
+	int count, ret = 0;
+
+	/* AFE power mode selection: 1: LDO mode, 0: Power-cut mode */
+	val8 = rtl8xxxu_read8(priv, 0x5d);
+	val8 &= ~BIT(0);
+	rtl8xxxu_write8(priv, 0x5d, val8);
+
+	val8 = rtl8xxxu_read8(priv, REG_SYS_FUNC_8710B);
+	val8 |= BIT(0);
+	rtl8xxxu_write8(priv, REG_SYS_FUNC_8710B, val8);
+
+	rtl8xxxu_write8(priv, 0x56, 0x0e);
+
+	val8 = rtl8xxxu_read8(priv, 0x20);
+	val8 |= BIT(0);
+	rtl8xxxu_write8(priv, 0x20, val8);
+
+	for (count = RTL8XXXU_MAX_REG_POLL; count; count--) {
+		val8 = rtl8xxxu_read8(priv, 0x20);
+		if (!(val8 & BIT(0)))
+			break;
+
+		udelay(10);
+	}
+
+	if (!count)
+		ret = -EBUSY;
+
+	return ret;
+}
+
+static int rtl8710bu_active_to_emu(struct rtl8xxxu_priv *priv)
+{
+	u8 val8;
+	u32 val32;
+	int count, ret = 0;
+
+	/* Turn off RF */
+	val32 = rtl8xxxu_read32(priv, REG_SYS_FUNC_8710B);
+	val32 &= ~GENMASK(26, 24);
+	rtl8xxxu_write32(priv, REG_SYS_FUNC_8710B, val32);
+
+	/* BB reset */
+	val32 = rtl8xxxu_read32(priv, REG_SYS_FUNC_8710B);
+	val32 &= ~GENMASK(17, 16);
+	rtl8xxxu_write32(priv, REG_SYS_FUNC_8710B, val32);
+
+	/* Turn off MAC by HW state machine */
+	val8 = rtl8xxxu_read8(priv, 0x20);
+	val8 |= BIT(1);
+	rtl8xxxu_write8(priv, 0x20, val8);
+
+	for (count = RTL8XXXU_MAX_REG_POLL; count; count--) {
+		val8 = rtl8xxxu_read8(priv, 0x20);
+		if ((val8 & BIT(1)) == 0) {
+			ret = 0;
+			break;
+		}
+		udelay(10);
+	}
+
+	if (!count)
+		ret = -EBUSY;
+
+	return ret;
+}
+
+static int rtl8710bu_active_to_lps(struct rtl8xxxu_priv *priv)
+{
+	struct device *dev = &priv->udev->dev;
+	u8 val8;
+	u16 val16;
+	u32 val32;
+	int retry, retval;
+
+	/* Tx Pause */
+	rtl8xxxu_write8(priv, REG_TXPAUSE, 0xff);
+
+	retry = 100;
+	retval = -EBUSY;
+	/*
+	 * Poll 32 bit wide REG_SCH_TX_CMD for 0x00000000 to ensure no TX is pending.
+	 */
+	do {
+		val32 = rtl8xxxu_read32(priv, REG_SCH_TX_CMD);
+		if (!val32) {
+			retval = 0;
+			break;
+		}
+		udelay(10);
+	} while (retry--);
+
+	if (!retry) {
+		dev_warn(dev, "Failed to flush TX queue\n");
+		retval = -EBUSY;
+		return retval;
+	}
+
+	/* Disable CCK and OFDM, clock gated */
+	val8 = rtl8xxxu_read8(priv, REG_SYS_FUNC);
+	val8 &= ~SYS_FUNC_BBRSTB;
+	rtl8xxxu_write8(priv, REG_SYS_FUNC, val8);
+
+	udelay(2);
+
+	/* Whole BB is reset */
+	val8 = rtl8xxxu_read8(priv, REG_SYS_FUNC);
+	val8 &= ~SYS_FUNC_BB_GLB_RSTN;
+	rtl8xxxu_write8(priv, REG_SYS_FUNC, val8);
+
+	/* Reset MAC TRX */
+	val16 = rtl8xxxu_read16(priv, REG_CR);
+	val16 &= 0xff00;
+	val16 |= CR_HCI_RXDMA_ENABLE | CR_HCI_TXDMA_ENABLE;
+	val16 &= ~CR_SECURITY_ENABLE;
+	rtl8xxxu_write16(priv, REG_CR, val16);
+
+	/* Respond TxOK to scheduler */
+	val8 = rtl8xxxu_read8(priv, REG_DUAL_TSF_RST);
+	val8 |= DUAL_TSF_TX_OK;
+	rtl8xxxu_write8(priv, REG_DUAL_TSF_RST, val8);
+
+	return retval;
+}
+
+static int rtl8710bu_power_on(struct rtl8xxxu_priv *priv)
+{
+	u32 val32;
+	u16 val16;
+	u8 val8;
+	int ret;
+
+	rtl8xxxu_write8(priv, REG_USB_ACCESS_TIMEOUT, 0x80);
+
+	val8 = rtl8xxxu_read8(priv, REG_SYS_ISO_CTRL);
+	val8 &= ~BIT(5);
+	rtl8xxxu_write8(priv, REG_SYS_ISO_CTRL, val8);
+
+	val8 = rtl8xxxu_read8(priv, REG_SYS_FUNC_8710B);
+	val8 |= BIT(0);
+	rtl8xxxu_write8(priv, REG_SYS_FUNC_8710B, val8);
+
+	val8 = rtl8xxxu_read8(priv, 0x20);
+	val8 |= BIT(0);
+	rtl8xxxu_write8(priv, 0x20, val8);
+
+	rtl8xxxu_write8(priv, REG_AFE_CTRL_8710B, 0);
+
+	val8 = rtl8xxxu_read8(priv, REG_WL_STATUS_8710B);
+	val8 |= BIT(1);
+	rtl8xxxu_write8(priv, REG_WL_STATUS_8710B, val8);
+
+	ret = rtl8710b_emu_to_active(priv);
+	if (ret)
+		return ret;
+
+	rtl8xxxu_write16(priv, REG_CR, 0);
+
+	val16 = rtl8xxxu_read16(priv, REG_CR);
+
+	val16 |= CR_HCI_TXDMA_ENABLE | CR_HCI_RXDMA_ENABLE |
+		 CR_TXDMA_ENABLE | CR_RXDMA_ENABLE |
+		 CR_PROTOCOL_ENABLE | CR_SCHEDULE_ENABLE |
+		 CR_SECURITY_ENABLE | CR_CALTIMER_ENABLE;
+	rtl8xxxu_write16(priv, REG_CR, val16);
+
+	/* Enable hardware sequence number. */
+	val8 = rtl8xxxu_read8(priv, REG_HWSEQ_CTRL);
+	val8 |= 0x7f;
+	rtl8xxxu_write8(priv, REG_HWSEQ_CTRL, val8);
+
+	udelay(2);
+
+	/*
+	 * Technically the rest was in the rtl8710bu_hal_init function,
+	 * not the power_on function, but it's fine because we only
+	 * call power_on from init_device.
+	 */
+
+	val8 = rtl8xxxu_read8(priv, 0xfef9);
+	val8 &= ~BIT(0);
+	rtl8xxxu_write8(priv, 0xfef9, val8);
+
+	/* Clear the 0x40000138[5] to prevent CM4 Suspend */
+	val32 = rtl8710b_read_syson_reg(priv, 0x138);
+	val32 &= ~BIT(5);
+	rtl8710b_write_syson_reg(priv, 0x138, val32);
+
+	return ret;
+}
+
+static void rtl8710bu_power_off(struct rtl8xxxu_priv *priv)
+{
+	u32 val32;
+	u8 val8;
+
+	rtl8xxxu_flush_fifo(priv);
+
+	rtl8xxxu_write32(priv, REG_HISR0_8710B, 0xffffffff);
+	rtl8xxxu_write32(priv, REG_HIMR0_8710B, 0x0);
+
+	/* Set the 0x40000138[5] to allow CM4 Suspend */
+	val32 = rtl8710b_read_syson_reg(priv, 0x138);
+	val32 |= BIT(5);
+	rtl8710b_write_syson_reg(priv, 0x138, val32);
+
+	/* Stop rx */
+	rtl8xxxu_write8(priv, REG_CR, 0x00);
+
+	rtl8710bu_active_to_lps(priv);
+
+	/* Reset MCU ? */
+	val8 = rtl8xxxu_read8(priv, REG_8051FW_CTRL_V1_8710B + 3);
+	val8 &= ~BIT(0);
+	rtl8xxxu_write8(priv, REG_8051FW_CTRL_V1_8710B + 3, val8);
+
+	/* Reset MCU ready status */
+	rtl8xxxu_write8(priv, REG_8051FW_CTRL_V1_8710B, 0x00);
+
+	rtl8710bu_active_to_emu(priv);
+}
+
+static void rtl8710b_reset_8051(struct rtl8xxxu_priv *priv)
+{
+	u8 val8;
+
+	val8 = rtl8xxxu_read8(priv, REG_8051FW_CTRL_V1_8710B + 3);
+	val8 &= ~BIT(0);
+	rtl8xxxu_write8(priv, REG_8051FW_CTRL_V1_8710B + 3, val8);
+
+	udelay(50);
+
+	val8 = rtl8xxxu_read8(priv, REG_8051FW_CTRL_V1_8710B + 3);
+	val8 |= BIT(0);
+	rtl8xxxu_write8(priv, REG_8051FW_CTRL_V1_8710B + 3, val8);
+}
+
+static void rtl8710b_enable_rf(struct rtl8xxxu_priv *priv)
+{
+	u32 val32;
+
+	rtl8xxxu_write8(priv, REG_RF_CTRL, RF_ENABLE | RF_RSTB | RF_SDMRSTB);
+
+	val32 = rtl8xxxu_read32(priv, REG_OFDM0_TRX_PATH_ENABLE);
+	val32 &= ~(OFDM_RF_PATH_RX_MASK | OFDM_RF_PATH_TX_MASK);
+	val32 |= OFDM_RF_PATH_RX_A | OFDM_RF_PATH_TX_A;
+	rtl8xxxu_write32(priv, REG_OFDM0_TRX_PATH_ENABLE, val32);
+
+	rtl8xxxu_write8(priv, REG_TXPAUSE, 0x00);
+}
+
+static void rtl8710b_disable_rf(struct rtl8xxxu_priv *priv)
+{
+	u32 val32;
+
+	val32 = rtl8xxxu_read32(priv, REG_OFDM0_TRX_PATH_ENABLE);
+	val32 &= ~OFDM_RF_PATH_TX_MASK;
+	rtl8xxxu_write32(priv, REG_OFDM0_TRX_PATH_ENABLE, val32);
+
+	/* Power down RF module */
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_AC, 0);
+}
+
+static void rtl8710b_usb_quirks(struct rtl8xxxu_priv *priv)
+{
+	u16 val16;
+
+	rtl8xxxu_gen2_usb_quirks(priv);
+
+	val16 = rtl8xxxu_read16(priv, REG_CR);
+	val16 |= (CR_MAC_TX_ENABLE | CR_MAC_RX_ENABLE);
+	rtl8xxxu_write16(priv, REG_CR, val16);
+}
+
+#define XTAL1	GENMASK(29, 24)
+#define XTAL0	GENMASK(23, 18)
+
+static void rtl8710b_set_crystal_cap(struct rtl8xxxu_priv *priv, u8 crystal_cap)
+{
+	struct rtl8xxxu_cfo_tracking *cfo = &priv->cfo_tracking;
+	u32 val32;
+
+	if (crystal_cap == cfo->crystal_cap)
+		return;
+
+	val32 = rtl8710b_read_syson_reg(priv, REG_SYS_XTAL_CTRL0_8710B);
+
+	dev_dbg(&priv->udev->dev,
+		"%s: Adjusting crystal cap from 0x%x (actually 0x%x 0x%x) to 0x%x\n",
+		__func__,
+		cfo->crystal_cap,
+		u32_get_bits(val32, XTAL1),
+		u32_get_bits(val32, XTAL0),
+		crystal_cap);
+
+	u32p_replace_bits(&val32, crystal_cap, XTAL1);
+	u32p_replace_bits(&val32, crystal_cap, XTAL0);
+	rtl8710b_write_syson_reg(priv, REG_SYS_XTAL_CTRL0_8710B, val32);
+
+	cfo->crystal_cap = crystal_cap;
+}
+
+static s8 rtl8710b_cck_rssi(struct rtl8xxxu_priv *priv, struct rtl8723au_phy_stats *phy_stats)
+{
+	struct jaguar2_phy_stats_type0 *phy_stats0 = (struct jaguar2_phy_stats_type0 *)phy_stats;
+	u8 lna_idx = (phy_stats0->lna_h << 3) | phy_stats0->lna_l;
+	u8 vga_idx = phy_stats0->vga;
+	s8 rx_pwr_all = 0x00;
+
+	switch (lna_idx) {
+	case 7:
+		rx_pwr_all = -52 - (2 * vga_idx);
+		break;
+	case 6:
+		rx_pwr_all = -42 - (2 * vga_idx);
+		break;
+	case 5:
+		rx_pwr_all = -36 - (2 * vga_idx);
+		break;
+	case 3:
+		rx_pwr_all = -12 - (2 * vga_idx);
+		break;
+	case 2:
+		rx_pwr_all = 0 - (2 * vga_idx);
+		break;
+	default:
+		rx_pwr_all = 0;
+		break;
+	}
+
+	return rx_pwr_all;
+}
+
+struct rtl8xxxu_fileops rtl8710bu_fops = {
+	.identify_chip = rtl8710bu_identify_chip,
+	.parse_efuse = rtl8710bu_parse_efuse,
+	.load_firmware = rtl8710bu_load_firmware,
+	.power_on = rtl8710bu_power_on,
+	.power_off = rtl8710bu_power_off,
+	.read_efuse = rtl8710b_read_efuse,
+	.reset_8051 = rtl8710b_reset_8051,
+	.llt_init = rtl8xxxu_auto_llt_table,
+	.init_phy_bb = rtl8710bu_init_phy_bb,
+	.init_phy_rf = rtl8710bu_init_phy_rf,
+	.phy_lc_calibrate = rtl8188f_phy_lc_calibrate,
+	.phy_iq_calibrate = rtl8710bu_phy_iq_calibrate,
+	.config_channel = rtl8710bu_config_channel,
+	.parse_rx_desc = rtl8xxxu_parse_rxdesc24,
+	.parse_phystats = jaguar2_rx_parse_phystats,
+	.init_aggregation = rtl8710bu_init_aggregation,
+	.init_statistics = rtl8710bu_init_statistics,
+	.init_burst = rtl8xxxu_init_burst,
+	.enable_rf = rtl8710b_enable_rf,
+	.disable_rf = rtl8710b_disable_rf,
+	.usb_quirks = rtl8710b_usb_quirks,
+	.set_tx_power = rtl8188f_set_tx_power,
+	.update_rate_mask = rtl8xxxu_gen2_update_rate_mask,
+	.report_connect = rtl8xxxu_gen2_report_connect,
+	.report_rssi = rtl8xxxu_gen2_report_rssi,
+	.fill_txdesc = rtl8xxxu_fill_txdesc_v2,
+	.set_crystal_cap = rtl8710b_set_crystal_cap,
+	.cck_rssi = rtl8710b_cck_rssi,
+	.writeN_block_size = 4,
+	.rx_desc_size = sizeof(struct rtl8xxxu_rxdesc24),
+	.tx_desc_size = sizeof(struct rtl8xxxu_txdesc40),
+	.has_tx_report = 1,
+	.gen2_thermal_meter = 1,
+	.needs_full_init = 1,
+	.init_reg_rxfltmap = 1,
+	.init_reg_pkt_life_time = 1,
+	.init_reg_hmtfr = 1,
+	.ampdu_max_time = 0x5e,
+	/*
+	 * The RTL8710BU vendor driver uses 0x50 here and it works fine,
+	 * but in rtl8xxxu 0x50 causes slow upload and random packet loss. Why?
+	 */
+	.ustime_tsf_edca = 0x28,
+	.max_aggr_num = 0x0c14,
+	.supports_ap = 1,
+	.max_macid_num = 16,
+	.adda_1t_init = 0x03c00016,
+	.adda_1t_path_on = 0x03c00016,
+	.trxff_boundary = 0x3f7f,
+	.pbp_rx = PBP_PAGE_SIZE_256,
+	.pbp_tx = PBP_PAGE_SIZE_256,
+	.mactable = rtl8710b_mac_init_table,
+	.total_page_num = TX_TOTAL_PAGE_NUM_8723B,
+	.page_num_hi = TX_PAGE_NUM_HI_PQ_8723B,
+	.page_num_lo = TX_PAGE_NUM_LO_PQ_8723B,
+	.page_num_norm = TX_PAGE_NUM_NORM_PQ_8723B,
+};
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723a.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723a.c
new file mode 100644
index 0000000000..15a30e4962
--- /dev/null
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723a.c
@@ -0,0 +1,525 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * RTL8XXXU mac80211 USB driver - 8723a specific subdriver
+ *
+ * Copyright (c) 2014 - 2017 Jes Sorensen <Jes.Sorensen@gmail.com>
+ *
+ * Portions, notably calibration code:
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This driver was written as a replacement for the vendor provided
+ * rtl8723au driver. As the Realtek 8xxx chips are very similar in
+ * their programming interface, I have started adding support for
+ * additional 8xxx chips like the 8192cu, 8188cus, etc.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <linux/usb.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/wireless.h>
+#include <linux/firmware.h>
+#include <linux/moduleparam.h>
+#include <net/mac80211.h>
+#include "rtl8xxxu.h"
+#include "rtl8xxxu_regs.h"
+
+static struct rtl8xxxu_power_base rtl8723a_power_base = {
+	.reg_0e00 = 0x0a0c0c0c,
+	.reg_0e04 = 0x02040608,
+	.reg_0e08 = 0x00000000,
+	.reg_086c = 0x00000000,
+
+	.reg_0e10 = 0x0a0c0d0e,
+	.reg_0e14 = 0x02040608,
+	.reg_0e18 = 0x0a0c0d0e,
+	.reg_0e1c = 0x02040608,
+
+	.reg_0830 = 0x0a0c0c0c,
+	.reg_0834 = 0x02040608,
+	.reg_0838 = 0x00000000,
+	.reg_086c_2 = 0x00000000,
+
+	.reg_083c = 0x0a0c0d0e,
+	.reg_0848 = 0x02040608,
+	.reg_084c = 0x0a0c0d0e,
+	.reg_0868 = 0x02040608,
+};
+
+static const struct rtl8xxxu_rfregval rtl8723au_radioa_1t_init_table[] = {
+	{0x00, 0x00030159}, {0x01, 0x00031284},
+	{0x02, 0x00098000}, {0x03, 0x00039c63},
+	{0x04, 0x000210e7}, {0x09, 0x0002044f},
+	{0x0a, 0x0001a3f1}, {0x0b, 0x00014787},
+	{0x0c, 0x000896fe}, {0x0d, 0x0000e02c},
+	{0x0e, 0x00039ce7}, {0x0f, 0x00000451},
+	{0x19, 0x00000000}, {0x1a, 0x00030355},
+	{0x1b, 0x00060a00}, {0x1c, 0x000fc378},
+	{0x1d, 0x000a1250}, {0x1e, 0x0000024f},
+	{0x1f, 0x00000000}, {0x20, 0x0000b614},
+	{0x21, 0x0006c000}, {0x22, 0x00000000},
+	{0x23, 0x00001558}, {0x24, 0x00000060},
+	{0x25, 0x00000483}, {0x26, 0x0004f000},
+	{0x27, 0x000ec7d9}, {0x28, 0x00057730},
+	{0x29, 0x00004783}, {0x2a, 0x00000001},
+	{0x2b, 0x00021334}, {0x2a, 0x00000000},
+	{0x2b, 0x00000054}, {0x2a, 0x00000001},
+	{0x2b, 0x00000808}, {0x2b, 0x00053333},
+	{0x2c, 0x0000000c}, {0x2a, 0x00000002},
+	{0x2b, 0x00000808}, {0x2b, 0x0005b333},
+	{0x2c, 0x0000000d}, {0x2a, 0x00000003},
+	{0x2b, 0x00000808}, {0x2b, 0x00063333},
+	{0x2c, 0x0000000d}, {0x2a, 0x00000004},
+	{0x2b, 0x00000808}, {0x2b, 0x0006b333},
+	{0x2c, 0x0000000d}, {0x2a, 0x00000005},
+	{0x2b, 0x00000808}, {0x2b, 0x00073333},
+	{0x2c, 0x0000000d}, {0x2a, 0x00000006},
+	{0x2b, 0x00000709}, {0x2b, 0x0005b333},
+	{0x2c, 0x0000000d}, {0x2a, 0x00000007},
+	{0x2b, 0x00000709}, {0x2b, 0x00063333},
+	{0x2c, 0x0000000d}, {0x2a, 0x00000008},
+	{0x2b, 0x0000060a}, {0x2b, 0x0004b333},
+	{0x2c, 0x0000000d}, {0x2a, 0x00000009},
+	{0x2b, 0x0000060a}, {0x2b, 0x00053333},
+	{0x2c, 0x0000000d}, {0x2a, 0x0000000a},
+	{0x2b, 0x0000060a}, {0x2b, 0x0005b333},
+	{0x2c, 0x0000000d}, {0x2a, 0x0000000b},
+	{0x2b, 0x0000060a}, {0x2b, 0x00063333},
+	{0x2c, 0x0000000d}, {0x2a, 0x0000000c},
+	{0x2b, 0x0000060a}, {0x2b, 0x0006b333},
+	{0x2c, 0x0000000d}, {0x2a, 0x0000000d},
+	{0x2b, 0x0000060a}, {0x2b, 0x00073333},
+	{0x2c, 0x0000000d}, {0x2a, 0x0000000e},
+	{0x2b, 0x0000050b}, {0x2b, 0x00066666},
+	{0x2c, 0x0000001a}, {0x2a, 0x000e0000},
+	{0x10, 0x0004000f}, {0x11, 0x000e31fc},
+	{0x10, 0x0006000f}, {0x11, 0x000ff9f8},
+	{0x10, 0x0002000f}, {0x11, 0x000203f9},
+	{0x10, 0x0003000f}, {0x11, 0x000ff500},
+	{0x10, 0x00000000}, {0x11, 0x00000000},
+	{0x10, 0x0008000f}, {0x11, 0x0003f100},
+	{0x10, 0x0009000f}, {0x11, 0x00023100},
+	{0x12, 0x00032000}, {0x12, 0x00071000},
+	{0x12, 0x000b0000}, {0x12, 0x000fc000},
+	{0x13, 0x000287b3}, {0x13, 0x000244b7},
+	{0x13, 0x000204ab}, {0x13, 0x0001c49f},
+	{0x13, 0x00018493}, {0x13, 0x0001429b},
+	{0x13, 0x00010299}, {0x13, 0x0000c29c},
+	{0x13, 0x000081a0}, {0x13, 0x000040ac},
+	{0x13, 0x00000020}, {0x14, 0x0001944c},
+	{0x14, 0x00059444}, {0x14, 0x0009944c},
+	{0x14, 0x000d9444}, {0x15, 0x0000f474},
+	{0x15, 0x0004f477}, {0x15, 0x0008f455},
+	{0x15, 0x000cf455}, {0x16, 0x00000339},
+	{0x16, 0x00040339}, {0x16, 0x00080339},
+	{0x16, 0x000c0366}, {0x00, 0x00010159},
+	{0x18, 0x0000f401}, {0xfe, 0x00000000},
+	{0xfe, 0x00000000}, {0x1f, 0x00000003},
+	{0xfe, 0x00000000}, {0xfe, 0x00000000},
+	{0x1e, 0x00000247}, {0x1f, 0x00000000},
+	{0x00, 0x00030159},
+	{0xff, 0xffffffff}
+};
+
+static int rtl8723au_identify_chip(struct rtl8xxxu_priv *priv)
+{
+	struct device *dev = &priv->udev->dev;
+	u32 val32, sys_cfg, vendor;
+	int ret = 0;
+
+	sys_cfg = rtl8xxxu_read32(priv, REG_SYS_CFG);
+	priv->chip_cut = u32_get_bits(sys_cfg, SYS_CFG_CHIP_VERSION_MASK);
+	if (sys_cfg & SYS_CFG_TRP_VAUX_EN) {
+		dev_info(dev, "Unsupported test chip\n");
+		ret = -ENOTSUPP;
+		goto out;
+	}
+
+	strscpy(priv->chip_name, "8723AU", sizeof(priv->chip_name));
+	priv->usb_interrupts = 1;
+	priv->rtl_chip = RTL8723A;
+
+	priv->rf_paths = 1;
+	priv->rx_paths = 1;
+	priv->tx_paths = 1;
+
+	val32 = rtl8xxxu_read32(priv, REG_MULTI_FUNC_CTRL);
+	if (val32 & MULTI_WIFI_FUNC_EN)
+		priv->has_wifi = 1;
+	if (val32 & MULTI_BT_FUNC_EN)
+		priv->has_bluetooth = 1;
+	if (val32 & MULTI_GPS_FUNC_EN)
+		priv->has_gps = 1;
+	priv->is_multi_func = 1;
+
+	vendor = sys_cfg & SYS_CFG_VENDOR_ID;
+	rtl8xxxu_identify_vendor_1bit(priv, vendor);
+
+	val32 = rtl8xxxu_read32(priv, REG_GPIO_OUTSTS);
+	priv->rom_rev = u32_get_bits(val32, GPIO_RF_RL_ID);
+
+	rtl8xxxu_config_endpoints_sie(priv);
+
+	/*
+	 * Fallback for devices that do not provide REG_NORMAL_SIE_EP_TX
+	 */
+	if (!priv->ep_tx_count)
+		ret = rtl8xxxu_config_endpoints_no_sie(priv);
+
+out:
+	return ret;
+}
+
+static int rtl8723au_parse_efuse(struct rtl8xxxu_priv *priv)
+{
+	struct rtl8723au_efuse *efuse = &priv->efuse_wifi.efuse8723;
+
+	if (efuse->rtl_id != cpu_to_le16(0x8129))
+		return -EINVAL;
+
+	ether_addr_copy(priv->mac_addr, efuse->mac_addr);
+
+	memcpy(priv->cck_tx_power_index_A,
+	       efuse->cck_tx_power_index_A,
+	       sizeof(efuse->cck_tx_power_index_A));
+	memcpy(priv->cck_tx_power_index_B,
+	       efuse->cck_tx_power_index_B,
+	       sizeof(efuse->cck_tx_power_index_B));
+
+	memcpy(priv->ht40_1s_tx_power_index_A,
+	       efuse->ht40_1s_tx_power_index_A,
+	       sizeof(efuse->ht40_1s_tx_power_index_A));
+	memcpy(priv->ht40_1s_tx_power_index_B,
+	       efuse->ht40_1s_tx_power_index_B,
+	       sizeof(efuse->ht40_1s_tx_power_index_B));
+
+	memcpy(priv->ht20_tx_power_index_diff,
+	       efuse->ht20_tx_power_index_diff,
+	       sizeof(efuse->ht20_tx_power_index_diff));
+	memcpy(priv->ofdm_tx_power_index_diff,
+	       efuse->ofdm_tx_power_index_diff,
+	       sizeof(efuse->ofdm_tx_power_index_diff));
+
+	memcpy(priv->ht40_max_power_offset,
+	       efuse->ht40_max_power_offset,
+	       sizeof(efuse->ht40_max_power_offset));
+	memcpy(priv->ht20_max_power_offset,
+	       efuse->ht20_max_power_offset,
+	       sizeof(efuse->ht20_max_power_offset));
+
+	if (priv->efuse_wifi.efuse8723.version >= 0x01)
+		priv->default_crystal_cap = priv->efuse_wifi.efuse8723.xtal_k & 0x3f;
+	else
+		priv->fops->set_crystal_cap = NULL;
+
+	priv->power_base = &rtl8723a_power_base;
+
+	return 0;
+}
+
+static int rtl8723au_load_firmware(struct rtl8xxxu_priv *priv)
+{
+	const char *fw_name;
+	int ret;
+
+	switch (priv->chip_cut) {
+	case 0:
+		fw_name = "rtlwifi/rtl8723aufw_A.bin";
+		break;
+	case 1:
+		if (priv->enable_bluetooth)
+			fw_name = "rtlwifi/rtl8723aufw_B.bin";
+		else
+			fw_name = "rtlwifi/rtl8723aufw_B_NoBT.bin";
+
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	ret = rtl8xxxu_load_firmware(priv, fw_name);
+	return ret;
+}
+
+static int rtl8723au_init_phy_rf(struct rtl8xxxu_priv *priv)
+{
+	int ret;
+
+	ret = rtl8xxxu_init_phy_rf(priv, rtl8723au_radioa_1t_init_table, RF_A);
+
+	/* Reduce 80M spur */
+	rtl8xxxu_write32(priv, REG_AFE_XTAL_CTRL, 0x0381808d);
+	rtl8xxxu_write32(priv, REG_AFE_PLL_CTRL, 0xf0ffff83);
+	rtl8xxxu_write32(priv, REG_AFE_PLL_CTRL, 0xf0ffff82);
+	rtl8xxxu_write32(priv, REG_AFE_PLL_CTRL, 0xf0ffff83);
+
+	return ret;
+}
+
+static int rtl8723a_emu_to_active(struct rtl8xxxu_priv *priv)
+{
+	u8 val8;
+	u32 val32;
+	int count, ret = 0;
+
+	/* 0x20[0] = 1 enable LDOA12 MACRO block for all interface*/
+	val8 = rtl8xxxu_read8(priv, REG_LDOA15_CTRL);
+	val8 |= LDOA15_ENABLE;
+	rtl8xxxu_write8(priv, REG_LDOA15_CTRL, val8);
+
+	/* 0x67[0] = 0 to disable BT_GPS_SEL pins*/
+	val8 = rtl8xxxu_read8(priv, 0x0067);
+	val8 &= ~BIT(4);
+	rtl8xxxu_write8(priv, 0x0067, val8);
+
+	mdelay(1);
+
+	/* 0x00[5] = 0 release analog Ips to digital, 1:isolation */
+	val8 = rtl8xxxu_read8(priv, REG_SYS_ISO_CTRL);
+	val8 &= ~SYS_ISO_ANALOG_IPS;
+	rtl8xxxu_write8(priv, REG_SYS_ISO_CTRL, val8);
+
+	/* disable SW LPS 0x04[10]= 0 */
+	val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
+	val8 &= ~BIT(2);
+	rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8);
+
+	/* wait till 0x04[17] = 1 power ready*/
+	for (count = RTL8XXXU_MAX_REG_POLL; count; count--) {
+		val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO);
+		if (val32 & BIT(17))
+			break;
+
+		udelay(10);
+	}
+
+	if (!count) {
+		ret = -EBUSY;
+		goto exit;
+	}
+
+	/* We should be able to optimize the following three entries into one */
+
+	/* release WLON reset 0x04[16]= 1*/
+	val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 2);
+	val8 |= BIT(0);
+	rtl8xxxu_write8(priv, REG_APS_FSMCO + 2, val8);
+
+	/* disable HWPDN 0x04[15]= 0*/
+	val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
+	val8 &= ~BIT(7);
+	rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8);
+
+	/* disable WL suspend*/
+	val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
+	val8 &= ~(BIT(3) | BIT(4));
+	rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8);
+
+	/* set, then poll until 0 */
+	val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO);
+	val32 |= APS_FSMCO_MAC_ENABLE;
+	rtl8xxxu_write32(priv, REG_APS_FSMCO, val32);
+
+	for (count = RTL8XXXU_MAX_REG_POLL; count; count--) {
+		val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO);
+		if ((val32 & APS_FSMCO_MAC_ENABLE) == 0) {
+			ret = 0;
+			break;
+		}
+		udelay(10);
+	}
+
+	if (!count) {
+		ret = -EBUSY;
+		goto exit;
+	}
+
+	/* 0x4C[23] = 0x4E[7] = 1, switch DPDT_SEL_P output from WL BB */
+	/*
+	 * Note: Vendor driver actually clears this bit, despite the
+	 * documentation claims it's being set!
+	 */
+	val8 = rtl8xxxu_read8(priv, REG_LEDCFG2);
+	val8 |= LEDCFG2_DPDT_SELECT;
+	val8 &= ~LEDCFG2_DPDT_SELECT;
+	rtl8xxxu_write8(priv, REG_LEDCFG2, val8);
+
+exit:
+	return ret;
+}
+
+static int rtl8723au_power_on(struct rtl8xxxu_priv *priv)
+{
+	u8 val8;
+	u16 val16;
+	u32 val32;
+	int ret;
+
+	/*
+	 * RSV_CTRL 0x001C[7:0] = 0x00, unlock ISO/CLK/Power control register
+	 */
+	rtl8xxxu_write8(priv, REG_RSV_CTRL, 0x0);
+
+	rtl8xxxu_disabled_to_emu(priv);
+
+	ret = rtl8723a_emu_to_active(priv);
+	if (ret)
+		goto exit;
+
+	/*
+	 * 0x0004[19] = 1, reset 8051
+	 */
+	val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 2);
+	val8 |= BIT(3);
+	rtl8xxxu_write8(priv, REG_APS_FSMCO + 2, val8);
+
+	/*
+	 * Enable MAC DMA/WMAC/SCHEDULE/SEC block
+	 * Set CR bit10 to enable 32k calibration.
+	 */
+	val16 = rtl8xxxu_read16(priv, REG_CR);
+	val16 |= (CR_HCI_TXDMA_ENABLE | CR_HCI_RXDMA_ENABLE |
+		  CR_TXDMA_ENABLE | CR_RXDMA_ENABLE |
+		  CR_PROTOCOL_ENABLE | CR_SCHEDULE_ENABLE |
+		  CR_MAC_TX_ENABLE | CR_MAC_RX_ENABLE |
+		  CR_SECURITY_ENABLE | CR_CALTIMER_ENABLE);
+	rtl8xxxu_write16(priv, REG_CR, val16);
+
+	/* For EFuse PG */
+	val32 = rtl8xxxu_read32(priv, REG_EFUSE_CTRL);
+	val32 &= ~(BIT(28) | BIT(29) | BIT(30));
+	val32 |= (0x06 << 28);
+	rtl8xxxu_write32(priv, REG_EFUSE_CTRL, val32);
+exit:
+	return ret;
+}
+
+#define XTAL1	GENMASK(23, 18)
+#define XTAL0	GENMASK(17, 12)
+
+void rtl8723a_set_crystal_cap(struct rtl8xxxu_priv *priv, u8 crystal_cap)
+{
+	struct rtl8xxxu_cfo_tracking *cfo = &priv->cfo_tracking;
+	u32 val32;
+
+	if (crystal_cap == cfo->crystal_cap)
+		return;
+
+	val32 = rtl8xxxu_read32(priv, REG_MAC_PHY_CTRL);
+
+	dev_dbg(&priv->udev->dev,
+	        "%s: Adjusting crystal cap from 0x%x (actually 0x%lx 0x%lx) to 0x%x\n",
+	        __func__,
+	        cfo->crystal_cap,
+	        FIELD_GET(XTAL1, val32),
+	        FIELD_GET(XTAL0, val32),
+	        crystal_cap);
+
+	val32 &= ~(XTAL1 | XTAL0);
+	val32 |= FIELD_PREP(XTAL1, crystal_cap) |
+		 FIELD_PREP(XTAL0, crystal_cap);
+	rtl8xxxu_write32(priv, REG_MAC_PHY_CTRL, val32);
+
+	cfo->crystal_cap = crystal_cap;
+}
+
+s8 rtl8723a_cck_rssi(struct rtl8xxxu_priv *priv, struct rtl8723au_phy_stats *phy_stats)
+{
+	u8 cck_agc_rpt = phy_stats->cck_agc_rpt_ofdm_cfosho_a;
+	s8 rx_pwr_all = 0x00;
+
+	switch (cck_agc_rpt & 0xc0) {
+	case 0xc0:
+		rx_pwr_all = -46 - (cck_agc_rpt & 0x3e);
+		break;
+	case 0x80:
+		rx_pwr_all = -26 - (cck_agc_rpt & 0x3e);
+		break;
+	case 0x40:
+		rx_pwr_all = -12 - (cck_agc_rpt & 0x3e);
+		break;
+	case 0x00:
+		rx_pwr_all = 16 - (cck_agc_rpt & 0x3e);
+		break;
+	}
+
+	return rx_pwr_all;
+}
+
+static int rtl8723au_led_brightness_set(struct led_classdev *led_cdev,
+					enum led_brightness brightness)
+{
+	struct rtl8xxxu_priv *priv = container_of(led_cdev,
+						  struct rtl8xxxu_priv,
+						  led_cdev);
+	u8 ledcfg = rtl8xxxu_read8(priv, REG_LEDCFG2);
+
+	if (brightness == LED_OFF) {
+		ledcfg &= ~LEDCFG2_HW_LED_CONTROL;
+		ledcfg |= LEDCFG2_SW_LED_CONTROL | LEDCFG2_SW_LED_DISABLE;
+	} else if (brightness == LED_ON) {
+		ledcfg &= ~(LEDCFG2_HW_LED_CONTROL | LEDCFG2_SW_LED_DISABLE);
+		ledcfg |= LEDCFG2_SW_LED_CONTROL;
+	} else if (brightness == RTL8XXXU_HW_LED_CONTROL) {
+		ledcfg &= ~LEDCFG2_SW_LED_DISABLE;
+		ledcfg |= LEDCFG2_HW_LED_CONTROL | LEDCFG2_HW_LED_ENABLE;
+	}
+
+	rtl8xxxu_write8(priv, REG_LEDCFG2, ledcfg);
+
+	return 0;
+}
+
+struct rtl8xxxu_fileops rtl8723au_fops = {
+	.identify_chip = rtl8723au_identify_chip,
+	.parse_efuse = rtl8723au_parse_efuse,
+	.load_firmware = rtl8723au_load_firmware,
+	.power_on = rtl8723au_power_on,
+	.power_off = rtl8xxxu_power_off,
+	.read_efuse = rtl8xxxu_read_efuse,
+	.reset_8051 = rtl8xxxu_reset_8051,
+	.llt_init = rtl8xxxu_init_llt_table,
+	.init_phy_bb = rtl8xxxu_gen1_init_phy_bb,
+	.init_phy_rf = rtl8723au_init_phy_rf,
+	.phy_lc_calibrate = rtl8723a_phy_lc_calibrate,
+	.phy_iq_calibrate = rtl8xxxu_gen1_phy_iq_calibrate,
+	.config_channel = rtl8xxxu_gen1_config_channel,
+	.parse_rx_desc = rtl8xxxu_parse_rxdesc16,
+	.parse_phystats = rtl8723au_rx_parse_phystats,
+	.init_aggregation = rtl8xxxu_gen1_init_aggregation,
+	.enable_rf = rtl8xxxu_gen1_enable_rf,
+	.disable_rf = rtl8xxxu_gen1_disable_rf,
+	.usb_quirks = rtl8xxxu_gen1_usb_quirks,
+	.set_tx_power = rtl8xxxu_gen1_set_tx_power,
+	.update_rate_mask = rtl8xxxu_update_rate_mask,
+	.report_connect = rtl8xxxu_gen1_report_connect,
+	.report_rssi = rtl8xxxu_gen1_report_rssi,
+	.fill_txdesc = rtl8xxxu_fill_txdesc_v1,
+	.set_crystal_cap = rtl8723a_set_crystal_cap,
+	.cck_rssi = rtl8723a_cck_rssi,
+	.led_classdev_brightness_set = rtl8723au_led_brightness_set,
+	.writeN_block_size = 1024,
+	.rx_agg_buf_size = 16000,
+	.tx_desc_size = sizeof(struct rtl8xxxu_txdesc32),
+	.rx_desc_size = sizeof(struct rtl8xxxu_rxdesc16),
+	.adda_1t_init = 0x0b1b25a0,
+	.adda_1t_path_on = 0x0bdb25a0,
+	.adda_2t_path_on_a = 0x04db25a4,
+	.adda_2t_path_on_b = 0x0b1b25a4,
+	.trxff_boundary = 0x27ff,
+	.pbp_rx = PBP_PAGE_SIZE_128,
+	.pbp_tx = PBP_PAGE_SIZE_128,
+	.mactable = rtl8xxxu_gen1_mac_init_table,
+	.total_page_num = TX_TOTAL_PAGE_NUM,
+	.page_num_hi = TX_PAGE_NUM_HI_PQ,
+	.page_num_lo = TX_PAGE_NUM_LO_PQ,
+	.page_num_norm = TX_PAGE_NUM_NORM_PQ,
+};
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c
new file mode 100644
index 0000000000..954369ed62
--- /dev/null
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c
@@ -0,0 +1,1759 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * RTL8XXXU mac80211 USB driver - 8723b specific subdriver
+ *
+ * Copyright (c) 2014 - 2017 Jes Sorensen <Jes.Sorensen@gmail.com>
+ *
+ * Portions, notably calibration code:
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This driver was written as a replacement for the vendor provided
+ * rtl8723au driver. As the Realtek 8xxx chips are very similar in
+ * their programming interface, I have started adding support for
+ * additional 8xxx chips like the 8192cu, 8188cus, etc.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <linux/usb.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/wireless.h>
+#include <linux/firmware.h>
+#include <linux/moduleparam.h>
+#include <net/mac80211.h>
+#include "rtl8xxxu.h"
+#include "rtl8xxxu_regs.h"
+
+static const struct rtl8xxxu_reg8val rtl8723b_mac_init_table[] = {
+	{0x02f, 0x30}, {0x035, 0x00}, {0x039, 0x08}, {0x04e, 0xe0},
+	{0x064, 0x00}, {0x067, 0x20}, {0x428, 0x0a}, {0x429, 0x10},
+	{0x430, 0x00}, {0x431, 0x00},
+	{0x432, 0x00}, {0x433, 0x01}, {0x434, 0x04}, {0x435, 0x05},
+	{0x436, 0x07}, {0x437, 0x08}, {0x43c, 0x04}, {0x43d, 0x05},
+	{0x43e, 0x07}, {0x43f, 0x08}, {0x440, 0x5d}, {0x441, 0x01},
+	{0x442, 0x00}, {0x444, 0x10}, {0x445, 0x00}, {0x446, 0x00},
+	{0x447, 0x00}, {0x448, 0x00}, {0x449, 0xf0}, {0x44a, 0x0f},
+	{0x44b, 0x3e}, {0x44c, 0x10}, {0x44d, 0x00}, {0x44e, 0x00},
+	{0x44f, 0x00}, {0x450, 0x00}, {0x451, 0xf0}, {0x452, 0x0f},
+	{0x453, 0x00}, {0x456, 0x5e}, {0x460, 0x66}, {0x461, 0x66},
+	{0x4c8, 0xff}, {0x4c9, 0x08}, {0x4cc, 0xff},
+	{0x4cd, 0xff}, {0x4ce, 0x01}, {0x500, 0x26}, {0x501, 0xa2},
+	{0x502, 0x2f}, {0x503, 0x00}, {0x504, 0x28}, {0x505, 0xa3},
+	{0x506, 0x5e}, {0x507, 0x00}, {0x508, 0x2b}, {0x509, 0xa4},
+	{0x50a, 0x5e}, {0x50b, 0x00}, {0x50c, 0x4f}, {0x50d, 0xa4},
+	{0x50e, 0x00}, {0x50f, 0x00}, {0x512, 0x1c}, {0x514, 0x0a},
+	{0x516, 0x0a}, {0x525, 0x4f},
+	{0x550, 0x10}, {0x551, 0x10}, {0x559, 0x02}, {0x55c, 0x50},
+	{0x55d, 0xff}, {0x605, 0x30}, {0x608, 0x0e}, {0x609, 0x2a},
+	{0x620, 0xff}, {0x621, 0xff}, {0x622, 0xff}, {0x623, 0xff},
+	{0x624, 0xff}, {0x625, 0xff}, {0x626, 0xff}, {0x627, 0xff},
+	{0x638, 0x50}, {0x63c, 0x0a}, {0x63d, 0x0a}, {0x63e, 0x0e},
+	{0x63f, 0x0e}, {0x640, 0x40}, {0x642, 0x40}, {0x643, 0x00},
+	{0x652, 0xc8}, {0x66e, 0x05}, {0x700, 0x21}, {0x701, 0x43},
+	{0x702, 0x65}, {0x703, 0x87}, {0x708, 0x21}, {0x709, 0x43},
+	{0x70a, 0x65}, {0x70b, 0x87}, {0x765, 0x18}, {0x76e, 0x04},
+	{0xffff, 0xff},
+};
+
+static const struct rtl8xxxu_reg32val rtl8723b_phy_1t_init_table[] = {
+	{0x800, 0x80040000}, {0x804, 0x00000003},
+	{0x808, 0x0000fc00}, {0x80c, 0x0000000a},
+	{0x810, 0x10001331}, {0x814, 0x020c3d10},
+	{0x818, 0x02200385}, {0x81c, 0x00000000},
+	{0x820, 0x01000100}, {0x824, 0x00190204},
+	{0x828, 0x00000000}, {0x82c, 0x00000000},
+	{0x830, 0x00000000}, {0x834, 0x00000000},
+	{0x838, 0x00000000}, {0x83c, 0x00000000},
+	{0x840, 0x00010000}, {0x844, 0x00000000},
+	{0x848, 0x00000000}, {0x84c, 0x00000000},
+	{0x850, 0x00000000}, {0x854, 0x00000000},
+	{0x858, 0x569a11a9}, {0x85c, 0x01000014},
+	{0x860, 0x66f60110}, {0x864, 0x061f0649},
+	{0x868, 0x00000000}, {0x86c, 0x27272700},
+	{0x870, 0x07000760}, {0x874, 0x25004000},
+	{0x878, 0x00000808}, {0x87c, 0x00000000},
+	{0x880, 0xb0000c1c}, {0x884, 0x00000001},
+	{0x888, 0x00000000}, {0x88c, 0xccc000c0},
+	{0x890, 0x00000800}, {0x894, 0xfffffffe},
+	{0x898, 0x40302010}, {0x89c, 0x00706050},
+	{0x900, 0x00000000}, {0x904, 0x00000023},
+	{0x908, 0x00000000}, {0x90c, 0x81121111},
+	{0x910, 0x00000002}, {0x914, 0x00000201},
+	{0xa00, 0x00d047c8}, {0xa04, 0x80ff800c},
+	{0xa08, 0x8c838300}, {0xa0c, 0x2e7f120f},
+	{0xa10, 0x9500bb78}, {0xa14, 0x1114d028},
+	{0xa18, 0x00881117}, {0xa1c, 0x89140f00},
+	{0xa20, 0x1a1b0000}, {0xa24, 0x090e1317},
+	{0xa28, 0x00000204}, {0xa2c, 0x00d30000},
+	{0xa70, 0x101fbf00}, {0xa74, 0x00000007},
+	{0xa78, 0x00000900}, {0xa7c, 0x225b0606},
+	{0xa80, 0x21806490}, {0xb2c, 0x00000000},
+	{0xc00, 0x48071d40}, {0xc04, 0x03a05611},
+	{0xc08, 0x000000e4}, {0xc0c, 0x6c6c6c6c},
+	{0xc10, 0x08800000}, {0xc14, 0x40000100},
+	{0xc18, 0x08800000}, {0xc1c, 0x40000100},
+	{0xc20, 0x00000000}, {0xc24, 0x00000000},
+	{0xc28, 0x00000000}, {0xc2c, 0x00000000},
+	{0xc30, 0x69e9ac44}, {0xc34, 0x469652af},
+	{0xc38, 0x49795994}, {0xc3c, 0x0a97971c},
+	{0xc40, 0x1f7c403f}, {0xc44, 0x000100b7},
+	{0xc48, 0xec020107}, {0xc4c, 0x007f037f},
+	{0xc50, 0x69553420}, {0xc54, 0x43bc0094},
+	{0xc58, 0x00013149}, {0xc5c, 0x00250492},
+	{0xc60, 0x00000000}, {0xc64, 0x7112848b},
+	{0xc68, 0x47c00bff}, {0xc6c, 0x00000036},
+	{0xc70, 0x2c7f000d}, {0xc74, 0x020610db},
+	{0xc78, 0x0000001f}, {0xc7c, 0x00b91612},
+	{0xc80, 0x390000e4}, {0xc84, 0x20f60000},
+	{0xc88, 0x40000100}, {0xc8c, 0x20200000},
+	{0xc90, 0x00020e1a}, {0xc94, 0x00000000},
+	{0xc98, 0x00020e1a}, {0xc9c, 0x00007f7f},
+	{0xca0, 0x00000000}, {0xca4, 0x000300a0},
+	{0xca8, 0x00000000}, {0xcac, 0x00000000},
+	{0xcb0, 0x00000000}, {0xcb4, 0x00000000},
+	{0xcb8, 0x00000000}, {0xcbc, 0x28000000},
+	{0xcc0, 0x00000000}, {0xcc4, 0x00000000},
+	{0xcc8, 0x00000000}, {0xccc, 0x00000000},
+	{0xcd0, 0x00000000}, {0xcd4, 0x00000000},
+	{0xcd8, 0x64b22427}, {0xcdc, 0x00766932},
+	{0xce0, 0x00222222}, {0xce4, 0x00000000},
+	{0xce8, 0x37644302}, {0xcec, 0x2f97d40c},
+	{0xd00, 0x00000740}, {0xd04, 0x40020401},
+	{0xd08, 0x0000907f}, {0xd0c, 0x20010201},
+	{0xd10, 0xa0633333}, {0xd14, 0x3333bc53},
+	{0xd18, 0x7a8f5b6f}, {0xd2c, 0xcc979975},
+	{0xd30, 0x00000000}, {0xd34, 0x80608000},
+	{0xd38, 0x00000000}, {0xd3c, 0x00127353},
+	{0xd40, 0x00000000}, {0xd44, 0x00000000},
+	{0xd48, 0x00000000}, {0xd4c, 0x00000000},
+	{0xd50, 0x6437140a}, {0xd54, 0x00000000},
+	{0xd58, 0x00000282}, {0xd5c, 0x30032064},
+	{0xd60, 0x4653de68}, {0xd64, 0x04518a3c},
+	{0xd68, 0x00002101}, {0xd6c, 0x2a201c16},
+	{0xd70, 0x1812362e}, {0xd74, 0x322c2220},
+	{0xd78, 0x000e3c24}, {0xe00, 0x2d2d2d2d},
+	{0xe04, 0x2d2d2d2d}, {0xe08, 0x0390272d},
+	{0xe10, 0x2d2d2d2d}, {0xe14, 0x2d2d2d2d},
+	{0xe18, 0x2d2d2d2d}, {0xe1c, 0x2d2d2d2d},
+	{0xe28, 0x00000000}, {0xe30, 0x1000dc1f},
+	{0xe34, 0x10008c1f}, {0xe38, 0x02140102},
+	{0xe3c, 0x681604c2}, {0xe40, 0x01007c00},
+	{0xe44, 0x01004800}, {0xe48, 0xfb000000},
+	{0xe4c, 0x000028d1}, {0xe50, 0x1000dc1f},
+	{0xe54, 0x10008c1f}, {0xe58, 0x02140102},
+	{0xe5c, 0x28160d05}, {0xe60, 0x00000008},
+	{0xe68, 0x001b2556}, {0xe6c, 0x00c00096},
+	{0xe70, 0x00c00096}, {0xe74, 0x01000056},
+	{0xe78, 0x01000014}, {0xe7c, 0x01000056},
+	{0xe80, 0x01000014}, {0xe84, 0x00c00096},
+	{0xe88, 0x01000056}, {0xe8c, 0x00c00096},
+	{0xed0, 0x00c00096}, {0xed4, 0x00c00096},
+	{0xed8, 0x00c00096}, {0xedc, 0x000000d6},
+	{0xee0, 0x000000d6}, {0xeec, 0x01c00016},
+	{0xf14, 0x00000003}, {0xf4c, 0x00000000},
+	{0xf00, 0x00000300},
+	{0x820, 0x01000100}, {0x800, 0x83040000},
+	{0xffff, 0xffffffff},
+};
+
+static const struct rtl8xxxu_reg32val rtl8xxx_agc_8723bu_table[] = {
+	{0xc78, 0xfd000001}, {0xc78, 0xfc010001},
+	{0xc78, 0xfb020001}, {0xc78, 0xfa030001},
+	{0xc78, 0xf9040001}, {0xc78, 0xf8050001},
+	{0xc78, 0xf7060001}, {0xc78, 0xf6070001},
+	{0xc78, 0xf5080001}, {0xc78, 0xf4090001},
+	{0xc78, 0xf30a0001}, {0xc78, 0xf20b0001},
+	{0xc78, 0xf10c0001}, {0xc78, 0xf00d0001},
+	{0xc78, 0xef0e0001}, {0xc78, 0xee0f0001},
+	{0xc78, 0xed100001}, {0xc78, 0xec110001},
+	{0xc78, 0xeb120001}, {0xc78, 0xea130001},
+	{0xc78, 0xe9140001}, {0xc78, 0xe8150001},
+	{0xc78, 0xe7160001}, {0xc78, 0xe6170001},
+	{0xc78, 0xe5180001}, {0xc78, 0xe4190001},
+	{0xc78, 0xe31a0001}, {0xc78, 0xa51b0001},
+	{0xc78, 0xa41c0001}, {0xc78, 0xa31d0001},
+	{0xc78, 0x671e0001}, {0xc78, 0x661f0001},
+	{0xc78, 0x65200001}, {0xc78, 0x64210001},
+	{0xc78, 0x63220001}, {0xc78, 0x4a230001},
+	{0xc78, 0x49240001}, {0xc78, 0x48250001},
+	{0xc78, 0x47260001}, {0xc78, 0x46270001},
+	{0xc78, 0x45280001}, {0xc78, 0x44290001},
+	{0xc78, 0x432a0001}, {0xc78, 0x422b0001},
+	{0xc78, 0x292c0001}, {0xc78, 0x282d0001},
+	{0xc78, 0x272e0001}, {0xc78, 0x262f0001},
+	{0xc78, 0x0a300001}, {0xc78, 0x09310001},
+	{0xc78, 0x08320001}, {0xc78, 0x07330001},
+	{0xc78, 0x06340001}, {0xc78, 0x05350001},
+	{0xc78, 0x04360001}, {0xc78, 0x03370001},
+	{0xc78, 0x02380001}, {0xc78, 0x01390001},
+	{0xc78, 0x013a0001}, {0xc78, 0x013b0001},
+	{0xc78, 0x013c0001}, {0xc78, 0x013d0001},
+	{0xc78, 0x013e0001}, {0xc78, 0x013f0001},
+	{0xc78, 0xfc400001}, {0xc78, 0xfb410001},
+	{0xc78, 0xfa420001}, {0xc78, 0xf9430001},
+	{0xc78, 0xf8440001}, {0xc78, 0xf7450001},
+	{0xc78, 0xf6460001}, {0xc78, 0xf5470001},
+	{0xc78, 0xf4480001}, {0xc78, 0xf3490001},
+	{0xc78, 0xf24a0001}, {0xc78, 0xf14b0001},
+	{0xc78, 0xf04c0001}, {0xc78, 0xef4d0001},
+	{0xc78, 0xee4e0001}, {0xc78, 0xed4f0001},
+	{0xc78, 0xec500001}, {0xc78, 0xeb510001},
+	{0xc78, 0xea520001}, {0xc78, 0xe9530001},
+	{0xc78, 0xe8540001}, {0xc78, 0xe7550001},
+	{0xc78, 0xe6560001}, {0xc78, 0xe5570001},
+	{0xc78, 0xe4580001}, {0xc78, 0xe3590001},
+	{0xc78, 0xa65a0001}, {0xc78, 0xa55b0001},
+	{0xc78, 0xa45c0001}, {0xc78, 0xa35d0001},
+	{0xc78, 0x675e0001}, {0xc78, 0x665f0001},
+	{0xc78, 0x65600001}, {0xc78, 0x64610001},
+	{0xc78, 0x63620001}, {0xc78, 0x62630001},
+	{0xc78, 0x61640001}, {0xc78, 0x48650001},
+	{0xc78, 0x47660001}, {0xc78, 0x46670001},
+	{0xc78, 0x45680001}, {0xc78, 0x44690001},
+	{0xc78, 0x436a0001}, {0xc78, 0x426b0001},
+	{0xc78, 0x286c0001}, {0xc78, 0x276d0001},
+	{0xc78, 0x266e0001}, {0xc78, 0x256f0001},
+	{0xc78, 0x24700001}, {0xc78, 0x09710001},
+	{0xc78, 0x08720001}, {0xc78, 0x07730001},
+	{0xc78, 0x06740001}, {0xc78, 0x05750001},
+	{0xc78, 0x04760001}, {0xc78, 0x03770001},
+	{0xc78, 0x02780001}, {0xc78, 0x01790001},
+	{0xc78, 0x017a0001}, {0xc78, 0x017b0001},
+	{0xc78, 0x017c0001}, {0xc78, 0x017d0001},
+	{0xc78, 0x017e0001}, {0xc78, 0x017f0001},
+	{0xc50, 0x69553422},
+	{0xc50, 0x69553420},
+	{0x824, 0x00390204},
+	{0xffff, 0xffffffff}
+};
+
+static const struct rtl8xxxu_rfregval rtl8723bu_radioa_1t_init_table[] = {
+	{0x00, 0x00010000}, {0xb0, 0x000dffe0},
+	{0xfe, 0x00000000}, {0xfe, 0x00000000},
+	{0xfe, 0x00000000}, {0xb1, 0x00000018},
+	{0xfe, 0x00000000}, {0xfe, 0x00000000},
+	{0xfe, 0x00000000}, {0xb2, 0x00084c00},
+	{0xb5, 0x0000d2cc}, {0xb6, 0x000925aa},
+	{0xb7, 0x00000010}, {0xb8, 0x0000907f},
+	{0x5c, 0x00000002}, {0x7c, 0x00000002},
+	{0x7e, 0x00000005}, {0x8b, 0x0006fc00},
+	{0xb0, 0x000ff9f0}, {0x1c, 0x000739d2},
+	{0x1e, 0x00000000}, {0xdf, 0x00000780},
+	{0x50, 0x00067435},
+	/*
+	 * The 8723bu vendor driver indicates that bit 8 should be set in
+	 * 0x51 for package types TFBGA90, TFBGA80, and TFBGA79. However
+	 * they never actually check the package type - and just default
+	 * to not setting it.
+	 */
+	{0x51, 0x0006b04e},
+	{0x52, 0x000007d2}, {0x53, 0x00000000},
+	{0x54, 0x00050400}, {0x55, 0x0004026e},
+	{0xdd, 0x0000004c}, {0x70, 0x00067435},
+	/*
+	 * 0x71 has same package type condition as for register 0x51
+	 */
+	{0x71, 0x0006b04e},
+	{0x72, 0x000007d2}, {0x73, 0x00000000},
+	{0x74, 0x00050400}, {0x75, 0x0004026e},
+	{0xef, 0x00000100}, {0x34, 0x0000add7},
+	{0x35, 0x00005c00}, {0x34, 0x00009dd4},
+	{0x35, 0x00005000}, {0x34, 0x00008dd1},
+	{0x35, 0x00004400}, {0x34, 0x00007dce},
+	{0x35, 0x00003800}, {0x34, 0x00006cd1},
+	{0x35, 0x00004400}, {0x34, 0x00005cce},
+	{0x35, 0x00003800}, {0x34, 0x000048ce},
+	{0x35, 0x00004400}, {0x34, 0x000034ce},
+	{0x35, 0x00003800}, {0x34, 0x00002451},
+	{0x35, 0x00004400}, {0x34, 0x0000144e},
+	{0x35, 0x00003800}, {0x34, 0x00000051},
+	{0x35, 0x00004400}, {0xef, 0x00000000},
+	{0xef, 0x00000100}, {0xed, 0x00000010},
+	{0x44, 0x0000add7}, {0x44, 0x00009dd4},
+	{0x44, 0x00008dd1}, {0x44, 0x00007dce},
+	{0x44, 0x00006cc1}, {0x44, 0x00005cce},
+	{0x44, 0x000044d1}, {0x44, 0x000034ce},
+	{0x44, 0x00002451}, {0x44, 0x0000144e},
+	{0x44, 0x00000051}, {0xef, 0x00000000},
+	{0xed, 0x00000000}, {0x7f, 0x00020080},
+	{0xef, 0x00002000}, {0x3b, 0x000380ef},
+	{0x3b, 0x000302fe}, {0x3b, 0x00028ce6},
+	{0x3b, 0x000200bc}, {0x3b, 0x000188a5},
+	{0x3b, 0x00010fbc}, {0x3b, 0x00008f71},
+	{0x3b, 0x00000900}, {0xef, 0x00000000},
+	{0xed, 0x00000001}, {0x40, 0x000380ef},
+	{0x40, 0x000302fe}, {0x40, 0x00028ce6},
+	{0x40, 0x000200bc}, {0x40, 0x000188a5},
+	{0x40, 0x00010fbc}, {0x40, 0x00008f71},
+	{0x40, 0x00000900}, {0xed, 0x00000000},
+	{0x82, 0x00080000}, {0x83, 0x00008000},
+	{0x84, 0x00048d80}, {0x85, 0x00068000},
+	{0xa2, 0x00080000}, {0xa3, 0x00008000},
+	{0xa4, 0x00048d80}, {0xa5, 0x00068000},
+	{0xed, 0x00000002}, {0xef, 0x00000002},
+	{0x56, 0x00000032}, {0x76, 0x00000032},
+	{0x01, 0x00000780},
+	{0xff, 0xffffffff}
+};
+
+static int rtl8723bu_identify_chip(struct rtl8xxxu_priv *priv)
+{
+	struct device *dev = &priv->udev->dev;
+	u32 val32, sys_cfg, vendor;
+	int ret = 0;
+
+	sys_cfg = rtl8xxxu_read32(priv, REG_SYS_CFG);
+	priv->chip_cut = u32_get_bits(sys_cfg, SYS_CFG_CHIP_VERSION_MASK);
+	if (sys_cfg & SYS_CFG_TRP_VAUX_EN) {
+		dev_info(dev, "Unsupported test chip\n");
+		ret = -ENOTSUPP;
+		goto out;
+	}
+
+	strscpy(priv->chip_name, "8723BU", sizeof(priv->chip_name));
+	priv->rtl_chip = RTL8723B;
+	priv->rf_paths = 1;
+	priv->rx_paths = 1;
+	priv->tx_paths = 1;
+
+	val32 = rtl8xxxu_read32(priv, REG_MULTI_FUNC_CTRL);
+	if (val32 & MULTI_WIFI_FUNC_EN)
+		priv->has_wifi = 1;
+	if (val32 & MULTI_BT_FUNC_EN)
+		priv->has_bluetooth = 1;
+	if (val32 & MULTI_GPS_FUNC_EN)
+		priv->has_gps = 1;
+	priv->is_multi_func = 1;
+
+	vendor = sys_cfg & SYS_CFG_VENDOR_EXT_MASK;
+	rtl8xxxu_identify_vendor_2bits(priv, vendor);
+
+	val32 = rtl8xxxu_read32(priv, REG_GPIO_OUTSTS);
+	priv->rom_rev = u32_get_bits(val32, GPIO_RF_RL_ID);
+
+	rtl8xxxu_config_endpoints_sie(priv);
+
+	/*
+	 * Fallback for devices that do not provide REG_NORMAL_SIE_EP_TX
+	 */
+	if (!priv->ep_tx_count)
+		ret = rtl8xxxu_config_endpoints_no_sie(priv);
+
+out:
+	return ret;
+}
+
+static void rtl8723bu_write_btreg(struct rtl8xxxu_priv *priv, u8 reg, u8 data)
+{
+	struct h2c_cmd h2c;
+	int reqnum = 0;
+
+	memset(&h2c, 0, sizeof(struct h2c_cmd));
+	h2c.bt_mp_oper.cmd = H2C_8723B_BT_MP_OPER;
+	h2c.bt_mp_oper.operreq = 0 | (reqnum << 4);
+	h2c.bt_mp_oper.opcode = BT_MP_OP_WRITE_REG_VALUE;
+	h2c.bt_mp_oper.data = data;
+	rtl8xxxu_gen2_h2c_cmd(priv, &h2c, sizeof(h2c.bt_mp_oper));
+
+	reqnum++;
+	memset(&h2c, 0, sizeof(struct h2c_cmd));
+	h2c.bt_mp_oper.cmd = H2C_8723B_BT_MP_OPER;
+	h2c.bt_mp_oper.operreq = 0 | (reqnum << 4);
+	h2c.bt_mp_oper.opcode = BT_MP_OP_WRITE_REG_VALUE;
+	h2c.bt_mp_oper.addr = reg;
+	rtl8xxxu_gen2_h2c_cmd(priv, &h2c, sizeof(h2c.bt_mp_oper));
+}
+
+static void rtl8723bu_reset_8051(struct rtl8xxxu_priv *priv)
+{
+	u8 val8;
+	u16 sys_func;
+
+	val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL);
+	val8 &= ~BIT(1);
+	rtl8xxxu_write8(priv, REG_RSV_CTRL, val8);
+
+	val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL + 1);
+	val8 &= ~BIT(0);
+	rtl8xxxu_write8(priv, REG_RSV_CTRL + 1, val8);
+
+	sys_func = rtl8xxxu_read16(priv, REG_SYS_FUNC);
+	sys_func &= ~SYS_FUNC_CPU_ENABLE;
+	rtl8xxxu_write16(priv, REG_SYS_FUNC, sys_func);
+
+	val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL);
+	val8 &= ~BIT(1);
+	rtl8xxxu_write8(priv, REG_RSV_CTRL, val8);
+
+	val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL + 1);
+	val8 |= BIT(0);
+	rtl8xxxu_write8(priv, REG_RSV_CTRL + 1, val8);
+
+	sys_func |= SYS_FUNC_CPU_ENABLE;
+	rtl8xxxu_write16(priv, REG_SYS_FUNC, sys_func);
+}
+
+static void
+rtl8723b_set_tx_power(struct rtl8xxxu_priv *priv, int channel, bool ht40)
+{
+	u32 val32, ofdm, mcs;
+	u8 cck, ofdmbase, mcsbase;
+	int group, tx_idx;
+
+	tx_idx = 0;
+	group = rtl8xxxu_gen2_channel_to_group(channel);
+
+	cck = priv->cck_tx_power_index_B[group];
+	val32 = rtl8xxxu_read32(priv, REG_TX_AGC_A_CCK1_MCS32);
+	val32 &= 0xffff00ff;
+	val32 |= (cck << 8);
+	rtl8xxxu_write32(priv, REG_TX_AGC_A_CCK1_MCS32, val32);
+
+	val32 = rtl8xxxu_read32(priv, REG_TX_AGC_B_CCK11_A_CCK2_11);
+	val32 &= 0xff;
+	val32 |= ((cck << 8) | (cck << 16) | (cck << 24));
+	rtl8xxxu_write32(priv, REG_TX_AGC_B_CCK11_A_CCK2_11, val32);
+
+	ofdmbase = priv->ht40_1s_tx_power_index_B[group];
+	ofdmbase += priv->ofdm_tx_power_diff[tx_idx].b;
+	ofdm = ofdmbase | ofdmbase << 8 | ofdmbase << 16 | ofdmbase << 24;
+
+	rtl8xxxu_write32(priv, REG_TX_AGC_A_RATE18_06, ofdm);
+	rtl8xxxu_write32(priv, REG_TX_AGC_A_RATE54_24, ofdm);
+
+	mcsbase = priv->ht40_1s_tx_power_index_B[group];
+	if (ht40)
+		mcsbase += priv->ht40_tx_power_diff[tx_idx++].b;
+	else
+		mcsbase += priv->ht20_tx_power_diff[tx_idx++].b;
+	mcs = mcsbase | mcsbase << 8 | mcsbase << 16 | mcsbase << 24;
+
+	rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS03_MCS00, mcs);
+	rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS07_MCS04, mcs);
+}
+
+static int rtl8723bu_parse_efuse(struct rtl8xxxu_priv *priv)
+{
+	struct rtl8723bu_efuse *efuse = &priv->efuse_wifi.efuse8723bu;
+	int i;
+
+	if (efuse->rtl_id != cpu_to_le16(0x8129))
+		return -EINVAL;
+
+	ether_addr_copy(priv->mac_addr, efuse->mac_addr);
+
+	memcpy(priv->cck_tx_power_index_A, efuse->tx_power_index_A.cck_base,
+	       sizeof(efuse->tx_power_index_A.cck_base));
+	memcpy(priv->cck_tx_power_index_B, efuse->tx_power_index_B.cck_base,
+	       sizeof(efuse->tx_power_index_B.cck_base));
+
+	memcpy(priv->ht40_1s_tx_power_index_A,
+	       efuse->tx_power_index_A.ht40_base,
+	       sizeof(efuse->tx_power_index_A.ht40_base));
+	memcpy(priv->ht40_1s_tx_power_index_B,
+	       efuse->tx_power_index_B.ht40_base,
+	       sizeof(efuse->tx_power_index_B.ht40_base));
+
+	priv->ofdm_tx_power_diff[0].a =
+		efuse->tx_power_index_A.ht20_ofdm_1s_diff.a;
+	priv->ofdm_tx_power_diff[0].b =
+		efuse->tx_power_index_B.ht20_ofdm_1s_diff.a;
+
+	priv->ht20_tx_power_diff[0].a =
+		efuse->tx_power_index_A.ht20_ofdm_1s_diff.b;
+	priv->ht20_tx_power_diff[0].b =
+		efuse->tx_power_index_B.ht20_ofdm_1s_diff.b;
+
+	priv->ht40_tx_power_diff[0].a = 0;
+	priv->ht40_tx_power_diff[0].b = 0;
+
+	for (i = 1; i < RTL8723B_TX_COUNT; i++) {
+		priv->ofdm_tx_power_diff[i].a =
+			efuse->tx_power_index_A.pwr_diff[i - 1].ofdm;
+		priv->ofdm_tx_power_diff[i].b =
+			efuse->tx_power_index_B.pwr_diff[i - 1].ofdm;
+
+		priv->ht20_tx_power_diff[i].a =
+			efuse->tx_power_index_A.pwr_diff[i - 1].ht20;
+		priv->ht20_tx_power_diff[i].b =
+			efuse->tx_power_index_B.pwr_diff[i - 1].ht20;
+
+		priv->ht40_tx_power_diff[i].a =
+			efuse->tx_power_index_A.pwr_diff[i - 1].ht40;
+		priv->ht40_tx_power_diff[i].b =
+			efuse->tx_power_index_B.pwr_diff[i - 1].ht40;
+	}
+
+	priv->default_crystal_cap = priv->efuse_wifi.efuse8723bu.xtal_k & 0x3f;
+
+	return 0;
+}
+
+static int rtl8723bu_load_firmware(struct rtl8xxxu_priv *priv)
+{
+	const char *fw_name;
+	int ret;
+
+	if (priv->enable_bluetooth)
+		fw_name = "rtlwifi/rtl8723bu_bt.bin";
+	else
+		fw_name = "rtlwifi/rtl8723bu_nic.bin";
+
+	ret = rtl8xxxu_load_firmware(priv, fw_name);
+	return ret;
+}
+
+static void rtl8723bu_init_phy_bb(struct rtl8xxxu_priv *priv)
+{
+	u8 val8;
+	u16 val16;
+
+	val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC);
+	val16 |= SYS_FUNC_BB_GLB_RSTN | SYS_FUNC_BBRSTB | SYS_FUNC_DIO_RF;
+	rtl8xxxu_write16(priv, REG_SYS_FUNC, val16);
+
+	rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00);
+
+	/* 6. 0x1f[7:0] = 0x07 */
+	val8 = RF_ENABLE | RF_RSTB | RF_SDMRSTB;
+	rtl8xxxu_write8(priv, REG_RF_CTRL, val8);
+
+	/* Why? */
+	rtl8xxxu_write8(priv, REG_SYS_FUNC, 0xe3);
+	rtl8xxxu_write8(priv, REG_AFE_XTAL_CTRL + 1, 0x80);
+	rtl8xxxu_init_phy_regs(priv, rtl8723b_phy_1t_init_table);
+
+	rtl8xxxu_init_phy_regs(priv, rtl8xxx_agc_8723bu_table);
+}
+
+static int rtl8723bu_init_phy_rf(struct rtl8xxxu_priv *priv)
+{
+	int ret;
+
+	ret = rtl8xxxu_init_phy_rf(priv, rtl8723bu_radioa_1t_init_table, RF_A);
+	/*
+	 * PHY LCK
+	 */
+	rtl8xxxu_write_rfreg(priv, RF_A, 0xb0, 0xdfbe0);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_MODE_AG, 0x8c01);
+	msleep(200);
+	rtl8xxxu_write_rfreg(priv, RF_A, 0xb0, 0xdffe0);
+
+	return ret;
+}
+
+void rtl8723bu_phy_init_antenna_selection(struct rtl8xxxu_priv *priv)
+{
+	u32 val32;
+
+	val32 = rtl8xxxu_read32(priv, REG_PAD_CTRL1);
+	val32 &= ~(BIT(20) | BIT(24));
+	rtl8xxxu_write32(priv, REG_PAD_CTRL1, val32);
+
+	val32 = rtl8xxxu_read32(priv, REG_GPIO_MUXCFG);
+	val32 &= ~BIT(4);
+	rtl8xxxu_write32(priv, REG_GPIO_MUXCFG, val32);
+
+	val32 = rtl8xxxu_read32(priv, REG_GPIO_MUXCFG);
+	val32 |= BIT(3);
+	rtl8xxxu_write32(priv, REG_GPIO_MUXCFG, val32);
+
+	val32 = rtl8xxxu_read32(priv, REG_LEDCFG0);
+	val32 |= BIT(24);
+	rtl8xxxu_write32(priv, REG_LEDCFG0, val32);
+
+	val32 = rtl8xxxu_read32(priv, REG_LEDCFG0);
+	val32 &= ~BIT(23);
+	rtl8xxxu_write32(priv, REG_LEDCFG0, val32);
+
+	val32 = rtl8xxxu_read32(priv, REG_RFE_BUFFER);
+	val32 |= (BIT(0) | BIT(1));
+	rtl8xxxu_write32(priv, REG_RFE_BUFFER, val32);
+
+	val32 = rtl8xxxu_read32(priv, REG_RFE_CTRL_ANTA_SRC);
+	val32 &= 0xffffff00;
+	val32 |= 0x77;
+	rtl8xxxu_write32(priv, REG_RFE_CTRL_ANTA_SRC, val32);
+
+	val32 = rtl8xxxu_read32(priv, REG_PWR_DATA);
+	val32 |= PWR_DATA_EEPRPAD_RFE_CTRL_EN;
+	rtl8xxxu_write32(priv, REG_PWR_DATA, val32);
+}
+
+static int rtl8723bu_iqk_path_a(struct rtl8xxxu_priv *priv)
+{
+	u32 reg_eac, reg_e94, reg_e9c, path_sel, val32;
+	int result = 0;
+
+	path_sel = rtl8xxxu_read32(priv, REG_S0S1_PATH_SWITCH);
+
+	/*
+	 * Leave IQK mode
+	 */
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+	val32 &= 0x000000ff;
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+
+	/*
+	 * Enable path A PA in TX IQK mode
+	 */
+	val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT);
+	val32 |= 0x80000;
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x20000);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0003f);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xc7f87);
+
+	/*
+	 * Tx IQK setting
+	 */
+	rtl8xxxu_write32(priv, REG_TX_IQK, 0x01007c00);
+	rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800);
+
+	/* path-A IQK setting */
+	rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x18008c1c);
+	rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x38008c1c);
+	rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x38008c1c);
+	rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c);
+
+	rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x821403ea);
+	rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x28110000);
+	rtl8xxxu_write32(priv, REG_TX_IQK_PI_B, 0x82110000);
+	rtl8xxxu_write32(priv, REG_RX_IQK_PI_B, 0x28110000);
+
+	/* LO calibration setting */
+	rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x00462911);
+
+	/*
+	 * Enter IQK mode
+	 */
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+	val32 &= 0x000000ff;
+	val32 |= 0x80800000;
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+
+	/*
+	 * The vendor driver indicates the USB module is always using
+	 * S0S1 path 1 for the 8723bu. This may be different for 8192eu
+	 */
+	if (priv->rf_paths > 1)
+		rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000000);
+	else
+		rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000280);
+
+	/*
+	 * Bit 12 seems to be BT_GRANT, and is only found in the 8723bu.
+	 * No trace of this in the 8192eu or 8188eu vendor drivers.
+	 */
+	rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00000800);
+
+	/* One shot, path A LOK & IQK */
+	rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000);
+	rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000);
+
+	mdelay(1);
+
+	/* Restore Ant Path */
+	rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, path_sel);
+#ifdef RTL8723BU_BT
+	/* GNT_BT = 1 */
+	rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00001800);
+#endif
+
+	/*
+	 * Leave IQK mode
+	 */
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+	val32 &= 0x000000ff;
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+
+	/* Check failed */
+	reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2);
+	reg_e94 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_A);
+	reg_e9c = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_A);
+
+	val32 = (reg_e9c >> 16) & 0x3ff;
+	if (val32 & 0x200)
+		val32 = 0x400 - val32;
+
+	if (!(reg_eac & BIT(28)) &&
+	    ((reg_e94 & 0x03ff0000) != 0x01420000) &&
+	    ((reg_e9c & 0x03ff0000) != 0x00420000) &&
+	    ((reg_e94 & 0x03ff0000)  < 0x01100000) &&
+	    ((reg_e94 & 0x03ff0000)  > 0x00f00000) &&
+	    val32 < 0xf)
+		result |= 0x01;
+	else	/* If TX not OK, ignore RX */
+		goto out;
+
+out:
+	return result;
+}
+
+static int rtl8723bu_rx_iqk_path_a(struct rtl8xxxu_priv *priv)
+{
+	u32 reg_ea4, reg_eac, reg_e94, reg_e9c, path_sel, val32;
+	int result = 0;
+
+	path_sel = rtl8xxxu_read32(priv, REG_S0S1_PATH_SWITCH);
+
+	/*
+	 * Leave IQK mode
+	 */
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+	val32 &= 0x000000ff;
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+
+	/*
+	 * Enable path A PA in TX IQK mode
+	 */
+	val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT);
+	val32 |= 0x80000;
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x30000);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0001f);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf7fb7);
+
+	/*
+	 * Tx IQK setting
+	 */
+	rtl8xxxu_write32(priv, REG_TX_IQK, 0x01007c00);
+	rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800);
+
+	/* path-A IQK setting */
+	rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x18008c1c);
+	rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x38008c1c);
+	rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x38008c1c);
+	rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c);
+
+	rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x82160ff0);
+	rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x28110000);
+	rtl8xxxu_write32(priv, REG_TX_IQK_PI_B, 0x82110000);
+	rtl8xxxu_write32(priv, REG_RX_IQK_PI_B, 0x28110000);
+
+	/* LO calibration setting */
+	rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x0046a911);
+
+	/*
+	 * Enter IQK mode
+	 */
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+	val32 &= 0x000000ff;
+	val32 |= 0x80800000;
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+
+	/*
+	 * The vendor driver indicates the USB module is always using
+	 * S0S1 path 1 for the 8723bu. This may be different for 8192eu
+	 */
+	if (priv->rf_paths > 1)
+		rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000000);
+	else
+		rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000280);
+
+	/*
+	 * Bit 12 seems to be BT_GRANT, and is only found in the 8723bu.
+	 * No trace of this in the 8192eu or 8188eu vendor drivers.
+	 */
+	rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00000800);
+
+	/* One shot, path A LOK & IQK */
+	rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000);
+	rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000);
+
+	mdelay(1);
+
+	/* Restore Ant Path */
+	rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, path_sel);
+#ifdef RTL8723BU_BT
+	/* GNT_BT = 1 */
+	rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00001800);
+#endif
+
+	/*
+	 * Leave IQK mode
+	 */
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+	val32 &= 0x000000ff;
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+
+	/* Check failed */
+	reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2);
+	reg_e94 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_A);
+	reg_e9c = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_A);
+
+	val32 = (reg_e9c >> 16) & 0x3ff;
+	if (val32 & 0x200)
+		val32 = 0x400 - val32;
+
+	if (!(reg_eac & BIT(28)) &&
+	    ((reg_e94 & 0x03ff0000) != 0x01420000) &&
+	    ((reg_e9c & 0x03ff0000) != 0x00420000) &&
+	    ((reg_e94 & 0x03ff0000)  < 0x01100000) &&
+	    ((reg_e94 & 0x03ff0000)  > 0x00f00000) &&
+	    val32 < 0xf)
+		result |= 0x01;
+	else	/* If TX not OK, ignore RX */
+		goto out;
+
+	val32 = 0x80007c00 | (reg_e94 &0x3ff0000) |
+		((reg_e9c & 0x3ff0000) >> 16);
+	rtl8xxxu_write32(priv, REG_TX_IQK, val32);
+
+	/*
+	 * Modify RX IQK mode
+	 */
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+	val32 &= 0x000000ff;
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+	val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT);
+	val32 |= 0x80000;
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x30000);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0001f);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf7d77);
+
+	/*
+	 * PA, PAD setting
+	 */
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_GAIN_CCA, 0xf80);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_55, 0x4021f);
+
+	/*
+	 * RX IQK setting
+	 */
+	rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800);
+
+	/* path-A IQK setting */
+	rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x38008c1c);
+	rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x18008c1c);
+	rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x38008c1c);
+	rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c);
+
+	rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x82110000);
+	rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x2816001f);
+	rtl8xxxu_write32(priv, REG_TX_IQK_PI_B, 0x82110000);
+	rtl8xxxu_write32(priv, REG_RX_IQK_PI_B, 0x28110000);
+
+	/* LO calibration setting */
+	rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x0046a8d1);
+
+	/*
+	 * Enter IQK mode
+	 */
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+	val32 &= 0x000000ff;
+	val32 |= 0x80800000;
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+
+	if (priv->rf_paths > 1)
+		rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000000);
+	else
+		rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000280);
+
+	/*
+	 * Disable BT
+	 */
+	rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00000800);
+
+	/* One shot, path A LOK & IQK */
+	rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000);
+	rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000);
+
+	mdelay(1);
+
+	/* Restore Ant Path */
+	rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, path_sel);
+#ifdef RTL8723BU_BT
+	/* GNT_BT = 1 */
+	rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00001800);
+#endif
+
+	/*
+	 * Leave IQK mode
+	 */
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+	val32 &= 0x000000ff;
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+
+	/* Check failed */
+	reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2);
+	reg_ea4 = rtl8xxxu_read32(priv, REG_RX_POWER_BEFORE_IQK_A_2);
+
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_GAIN_CCA, 0x780);
+
+	val32 = (reg_eac >> 16) & 0x3ff;
+	if (val32 & 0x200)
+		val32 = 0x400 - val32;
+
+	if (!(reg_eac & BIT(27)) &&
+	    ((reg_ea4 & 0x03ff0000) != 0x01320000) &&
+	    ((reg_eac & 0x03ff0000) != 0x00360000) &&
+	    ((reg_ea4 & 0x03ff0000)  < 0x01100000) &&
+	    ((reg_ea4 & 0x03ff0000)  > 0x00f00000) &&
+	    val32 < 0xf)
+		result |= 0x02;
+	else	/* If TX not OK, ignore RX */
+		goto out;
+out:
+	return result;
+}
+
+static void rtl8723bu_phy_iqcalibrate(struct rtl8xxxu_priv *priv,
+				      int result[][8], int t)
+{
+	struct device *dev = &priv->udev->dev;
+	u32 i, val32;
+	int path_a_ok /*, path_b_ok */;
+	int retry = 2;
+	static const u32 adda_regs[RTL8XXXU_ADDA_REGS] = {
+		REG_FPGA0_XCD_SWITCH_CTRL, REG_BLUETOOTH,
+		REG_RX_WAIT_CCA, REG_TX_CCK_RFON,
+		REG_TX_CCK_BBON, REG_TX_OFDM_RFON,
+		REG_TX_OFDM_BBON, REG_TX_TO_RX,
+		REG_TX_TO_TX, REG_RX_CCK,
+		REG_RX_OFDM, REG_RX_WAIT_RIFS,
+		REG_RX_TO_RX, REG_STANDBY,
+		REG_SLEEP, REG_PMPD_ANAEN
+	};
+	static const u32 iqk_mac_regs[RTL8XXXU_MAC_REGS] = {
+		REG_TXPAUSE, REG_BEACON_CTRL,
+		REG_BEACON_CTRL_1, REG_GPIO_MUXCFG
+	};
+	static const u32 iqk_bb_regs[RTL8XXXU_BB_REGS] = {
+		REG_OFDM0_TRX_PATH_ENABLE, REG_OFDM0_TR_MUX_PAR,
+		REG_FPGA0_XCD_RF_SW_CTRL, REG_CONFIG_ANT_A, REG_CONFIG_ANT_B,
+		REG_FPGA0_XAB_RF_SW_CTRL, REG_FPGA0_XA_RF_INT_OE,
+		REG_FPGA0_XB_RF_INT_OE, REG_FPGA0_RF_MODE
+	};
+	u8 xa_agc = rtl8xxxu_read32(priv, REG_OFDM0_XA_AGC_CORE1) & 0xff;
+	u8 xb_agc = rtl8xxxu_read32(priv, REG_OFDM0_XB_AGC_CORE1) & 0xff;
+
+	/*
+	 * Note: IQ calibration must be performed after loading
+	 *       PHY_REG.txt , and radio_a, radio_b.txt
+	 */
+
+	if (t == 0) {
+		/* Save ADDA parameters, turn Path A ADDA on */
+		rtl8xxxu_save_regs(priv, adda_regs, priv->adda_backup,
+				   RTL8XXXU_ADDA_REGS);
+		rtl8xxxu_save_mac_regs(priv, iqk_mac_regs, priv->mac_backup);
+		rtl8xxxu_save_regs(priv, iqk_bb_regs,
+				   priv->bb_backup, RTL8XXXU_BB_REGS);
+	}
+
+	rtl8xxxu_path_adda_on(priv, adda_regs, true);
+
+	/* MAC settings */
+	rtl8xxxu_mac_calibration(priv, iqk_mac_regs, priv->mac_backup);
+
+	val32 = rtl8xxxu_read32(priv, REG_CCK0_AFE_SETTING);
+	val32 |= 0x0f000000;
+	rtl8xxxu_write32(priv, REG_CCK0_AFE_SETTING, val32);
+
+	rtl8xxxu_write32(priv, REG_OFDM0_TRX_PATH_ENABLE, 0x03a05600);
+	rtl8xxxu_write32(priv, REG_OFDM0_TR_MUX_PAR, 0x000800e4);
+	rtl8xxxu_write32(priv, REG_FPGA0_XCD_RF_SW_CTRL, 0x22204000);
+
+	/*
+	 * RX IQ calibration setting for 8723B D cut large current issue
+	 * when leaving IPS
+	 */
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+	val32 &= 0x000000ff;
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+
+	val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT);
+	val32 |= 0x80000;
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32);
+
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x30000);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0001f);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf7fb7);
+
+	val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_ED);
+	val32 |= 0x20;
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_ED, val32);
+
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_43, 0x60fbd);
+
+	for (i = 0; i < retry; i++) {
+		path_a_ok = rtl8723bu_iqk_path_a(priv);
+		if (path_a_ok == 0x01) {
+			val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+			val32 &= 0x000000ff;
+			rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+
+			val32 = rtl8xxxu_read32(priv,
+						REG_TX_POWER_BEFORE_IQK_A);
+			result[t][0] = (val32 >> 16) & 0x3ff;
+			val32 = rtl8xxxu_read32(priv,
+						REG_TX_POWER_AFTER_IQK_A);
+			result[t][1] = (val32 >> 16) & 0x3ff;
+
+			break;
+		}
+	}
+
+	if (!path_a_ok)
+		dev_dbg(dev, "%s: Path A TX IQK failed!\n", __func__);
+
+	for (i = 0; i < retry; i++) {
+		path_a_ok = rtl8723bu_rx_iqk_path_a(priv);
+		if (path_a_ok == 0x03) {
+			val32 = rtl8xxxu_read32(priv,
+						REG_RX_POWER_BEFORE_IQK_A_2);
+			result[t][2] = (val32 >> 16) & 0x3ff;
+			val32 = rtl8xxxu_read32(priv,
+						REG_RX_POWER_AFTER_IQK_A_2);
+			result[t][3] = (val32 >> 16) & 0x3ff;
+
+			break;
+		}
+	}
+
+	if (!path_a_ok)
+		dev_dbg(dev, "%s: Path A RX IQK failed!\n", __func__);
+
+	if (priv->tx_paths > 1) {
+#if 1
+		dev_warn(dev, "%s: Path B not supported\n", __func__);
+#else
+
+		/*
+		 * Path A into standby
+		 */
+		val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+		val32 &= 0x000000ff;
+		rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+		rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_AC, 0x10000);
+
+		val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+		val32 &= 0x000000ff;
+		val32 |= 0x80800000;
+		rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+
+		/* Turn Path B ADDA on */
+		rtl8xxxu_path_adda_on(priv, adda_regs, false);
+
+		for (i = 0; i < retry; i++) {
+			path_b_ok = rtl8xxxu_iqk_path_b(priv);
+			if (path_b_ok == 0x03) {
+				val32 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_B);
+				result[t][4] = (val32 >> 16) & 0x3ff;
+				val32 = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_B);
+				result[t][5] = (val32 >> 16) & 0x3ff;
+				break;
+			}
+		}
+
+		if (!path_b_ok)
+			dev_dbg(dev, "%s: Path B IQK failed!\n", __func__);
+
+		for (i = 0; i < retry; i++) {
+			path_b_ok = rtl8723bu_rx_iqk_path_b(priv);
+			if (path_a_ok == 0x03) {
+				val32 = rtl8xxxu_read32(priv,
+							REG_RX_POWER_BEFORE_IQK_B_2);
+				result[t][6] = (val32 >> 16) & 0x3ff;
+				val32 = rtl8xxxu_read32(priv,
+							REG_RX_POWER_AFTER_IQK_B_2);
+				result[t][7] = (val32 >> 16) & 0x3ff;
+				break;
+			}
+		}
+
+		if (!path_b_ok)
+			dev_dbg(dev, "%s: Path B RX IQK failed!\n", __func__);
+#endif
+	}
+
+	/* Back to BB mode, load original value */
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+	val32 &= 0x000000ff;
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+
+	if (t) {
+		/* Reload ADDA power saving parameters */
+		rtl8xxxu_restore_regs(priv, adda_regs, priv->adda_backup,
+				      RTL8XXXU_ADDA_REGS);
+
+		/* Reload MAC parameters */
+		rtl8xxxu_restore_mac_regs(priv, iqk_mac_regs, priv->mac_backup);
+
+		/* Reload BB parameters */
+		rtl8xxxu_restore_regs(priv, iqk_bb_regs,
+				      priv->bb_backup, RTL8XXXU_BB_REGS);
+
+		/* Restore RX initial gain */
+		val32 = rtl8xxxu_read32(priv, REG_OFDM0_XA_AGC_CORE1);
+		val32 &= 0xffffff00;
+		rtl8xxxu_write32(priv, REG_OFDM0_XA_AGC_CORE1, val32 | 0x50);
+		rtl8xxxu_write32(priv, REG_OFDM0_XA_AGC_CORE1, val32 | xa_agc);
+
+		if (priv->tx_paths > 1) {
+			val32 = rtl8xxxu_read32(priv, REG_OFDM0_XB_AGC_CORE1);
+			val32 &= 0xffffff00;
+			rtl8xxxu_write32(priv, REG_OFDM0_XB_AGC_CORE1,
+					 val32 | 0x50);
+			rtl8xxxu_write32(priv, REG_OFDM0_XB_AGC_CORE1,
+					 val32 | xb_agc);
+		}
+
+		/* Load 0xe30 IQC default value */
+		rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x01008c00);
+		rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x01008c00);
+	}
+}
+
+static void rtl8723bu_phy_iq_calibrate(struct rtl8xxxu_priv *priv)
+{
+	struct device *dev = &priv->udev->dev;
+	int result[4][8];	/* last is final result */
+	int i, candidate;
+	bool path_a_ok, path_b_ok;
+	u32 reg_e94, reg_e9c, reg_ea4, reg_eac;
+	u32 reg_eb4, reg_ebc, reg_ec4, reg_ecc;
+	u32 val32, bt_control;
+	s32 reg_tmp = 0;
+	bool simu;
+
+	rtl8xxxu_gen2_prepare_calibrate(priv, 1);
+
+	memset(result, 0, sizeof(result));
+	candidate = -1;
+
+	path_a_ok = false;
+	path_b_ok = false;
+
+	bt_control = rtl8xxxu_read32(priv, REG_BT_CONTROL_8723BU);
+
+	for (i = 0; i < 3; i++) {
+		rtl8723bu_phy_iqcalibrate(priv, result, i);
+
+		if (i == 1) {
+			simu = rtl8xxxu_gen2_simularity_compare(priv,
+								result, 0, 1);
+			if (simu) {
+				candidate = 0;
+				break;
+			}
+		}
+
+		if (i == 2) {
+			simu = rtl8xxxu_gen2_simularity_compare(priv,
+								result, 0, 2);
+			if (simu) {
+				candidate = 0;
+				break;
+			}
+
+			simu = rtl8xxxu_gen2_simularity_compare(priv,
+								result, 1, 2);
+			if (simu) {
+				candidate = 1;
+			} else {
+				for (i = 0; i < 8; i++)
+					reg_tmp += result[3][i];
+
+				if (reg_tmp)
+					candidate = 3;
+				else
+					candidate = -1;
+			}
+		}
+	}
+
+	for (i = 0; i < 4; i++) {
+		reg_e94 = result[i][0];
+		reg_e9c = result[i][1];
+		reg_ea4 = result[i][2];
+		reg_eac = result[i][3];
+		reg_eb4 = result[i][4];
+		reg_ebc = result[i][5];
+		reg_ec4 = result[i][6];
+		reg_ecc = result[i][7];
+	}
+
+	if (candidate >= 0) {
+		reg_e94 = result[candidate][0];
+		priv->rege94 =  reg_e94;
+		reg_e9c = result[candidate][1];
+		priv->rege9c = reg_e9c;
+		reg_ea4 = result[candidate][2];
+		reg_eac = result[candidate][3];
+		reg_eb4 = result[candidate][4];
+		priv->regeb4 = reg_eb4;
+		reg_ebc = result[candidate][5];
+		priv->regebc = reg_ebc;
+		reg_ec4 = result[candidate][6];
+		reg_ecc = result[candidate][7];
+		dev_dbg(dev, "%s: candidate is %x\n", __func__, candidate);
+		dev_dbg(dev,
+			"%s: e94 =%x e9c=%x ea4=%x eac=%x eb4=%x ebc=%x ec4=%x ecc=%x\n",
+			__func__, reg_e94, reg_e9c,
+			reg_ea4, reg_eac, reg_eb4, reg_ebc, reg_ec4, reg_ecc);
+		path_a_ok = true;
+		path_b_ok = true;
+	} else {
+		reg_e94 = reg_eb4 = priv->rege94 = priv->regeb4 = 0x100;
+		reg_e9c = reg_ebc = priv->rege9c = priv->regebc = 0x0;
+	}
+
+	if (reg_e94 && candidate >= 0)
+		rtl8xxxu_fill_iqk_matrix_a(priv, path_a_ok, result,
+					   candidate, (reg_ea4 == 0));
+
+	if (priv->tx_paths > 1 && reg_eb4)
+		rtl8xxxu_fill_iqk_matrix_b(priv, path_b_ok, result,
+					   candidate, (reg_ec4 == 0));
+
+	rtl8xxxu_save_regs(priv, rtl8xxxu_iqk_phy_iq_bb_reg,
+			   priv->bb_recovery_backup, RTL8XXXU_BB_REGS);
+
+	rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, bt_control);
+
+	val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT);
+	val32 |= 0x80000;
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x18000);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0001f);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xe6177);
+	val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_ED);
+	val32 |= 0x20;
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_ED, val32);
+	rtl8xxxu_write_rfreg(priv, RF_A, 0x43, 0x300bd);
+
+	if (priv->rf_paths > 1)
+		dev_dbg(dev, "%s: 8723BU 2T not supported\n", __func__);
+
+	rtl8xxxu_gen2_prepare_calibrate(priv, 0);
+}
+
+static int rtl8723bu_active_to_emu(struct rtl8xxxu_priv *priv)
+{
+	u8 val8;
+	u16 val16;
+	u32 val32;
+	int count, ret = 0;
+
+	/* Turn off RF */
+	rtl8xxxu_write8(priv, REG_RF_CTRL, 0);
+
+	/* Enable rising edge triggering interrupt */
+	val16 = rtl8xxxu_read16(priv, REG_GPIO_INTM);
+	val16 &= ~GPIO_INTM_EDGE_TRIG_IRQ;
+	rtl8xxxu_write16(priv, REG_GPIO_INTM, val16);
+
+	/* Release WLON reset 0x04[16]= 1*/
+	val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO);
+	val32 |= APS_FSMCO_WLON_RESET;
+	rtl8xxxu_write32(priv, REG_APS_FSMCO, val32);
+
+	/* 0x0005[1] = 1 turn off MAC by HW state machine*/
+	val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
+	val8 |= BIT(1);
+	rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8);
+
+	for (count = RTL8XXXU_MAX_REG_POLL; count; count--) {
+		val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
+		if ((val8 & BIT(1)) == 0)
+			break;
+		udelay(10);
+	}
+
+	if (!count) {
+		dev_warn(&priv->udev->dev, "%s: Disabling MAC timed out\n",
+			 __func__);
+		ret = -EBUSY;
+		goto exit;
+	}
+
+	/* Enable BT control XTAL setting */
+	val8 = rtl8xxxu_read8(priv, REG_AFE_MISC);
+	val8 &= ~AFE_MISC_WL_XTAL_CTRL;
+	rtl8xxxu_write8(priv, REG_AFE_MISC, val8);
+
+	/* 0x0000[5] = 1 analog Ips to digital, 1:isolation */
+	val8 = rtl8xxxu_read8(priv, REG_SYS_ISO_CTRL);
+	val8 |= SYS_ISO_ANALOG_IPS;
+	rtl8xxxu_write8(priv, REG_SYS_ISO_CTRL, val8);
+
+	/* 0x0020[0] = 0 disable LDOA12 MACRO block*/
+	val8 = rtl8xxxu_read8(priv, REG_LDOA15_CTRL);
+	val8 &= ~LDOA15_ENABLE;
+	rtl8xxxu_write8(priv, REG_LDOA15_CTRL, val8);
+
+exit:
+	return ret;
+}
+
+static int rtl8723b_emu_to_active(struct rtl8xxxu_priv *priv)
+{
+	u8 val8;
+	u32 val32;
+	int count, ret = 0;
+
+	/* 0x20[0] = 1 enable LDOA12 MACRO block for all interface */
+	val8 = rtl8xxxu_read8(priv, REG_LDOA15_CTRL);
+	val8 |= LDOA15_ENABLE;
+	rtl8xxxu_write8(priv, REG_LDOA15_CTRL, val8);
+
+	/* 0x67[0] = 0 to disable BT_GPS_SEL pins*/
+	val8 = rtl8xxxu_read8(priv, 0x0067);
+	val8 &= ~BIT(4);
+	rtl8xxxu_write8(priv, 0x0067, val8);
+
+	mdelay(1);
+
+	/* 0x00[5] = 0 release analog Ips to digital, 1:isolation */
+	val8 = rtl8xxxu_read8(priv, REG_SYS_ISO_CTRL);
+	val8 &= ~SYS_ISO_ANALOG_IPS;
+	rtl8xxxu_write8(priv, REG_SYS_ISO_CTRL, val8);
+
+	/* Disable SW LPS 0x04[10]= 0 */
+	val32 = rtl8xxxu_read8(priv, REG_APS_FSMCO);
+	val32 &= ~APS_FSMCO_SW_LPS;
+	rtl8xxxu_write32(priv, REG_APS_FSMCO, val32);
+
+	/* Wait until 0x04[17] = 1 power ready */
+	for (count = RTL8XXXU_MAX_REG_POLL; count; count--) {
+		val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO);
+		if (val32 & BIT(17))
+			break;
+
+		udelay(10);
+	}
+
+	if (!count) {
+		ret = -EBUSY;
+		goto exit;
+	}
+
+	/* We should be able to optimize the following three entries into one */
+
+	/* Release WLON reset 0x04[16]= 1*/
+	val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO);
+	val32 |= APS_FSMCO_WLON_RESET;
+	rtl8xxxu_write32(priv, REG_APS_FSMCO, val32);
+
+	/* Disable HWPDN 0x04[15]= 0*/
+	val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO);
+	val32 &= ~APS_FSMCO_HW_POWERDOWN;
+	rtl8xxxu_write32(priv, REG_APS_FSMCO, val32);
+
+	/* Disable WL suspend*/
+	val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO);
+	val32 &= ~(APS_FSMCO_HW_SUSPEND | APS_FSMCO_PCIE);
+	rtl8xxxu_write32(priv, REG_APS_FSMCO, val32);
+
+	/* Set, then poll until 0 */
+	val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO);
+	val32 |= APS_FSMCO_MAC_ENABLE;
+	rtl8xxxu_write32(priv, REG_APS_FSMCO, val32);
+
+	for (count = RTL8XXXU_MAX_REG_POLL; count; count--) {
+		val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO);
+		if ((val32 & APS_FSMCO_MAC_ENABLE) == 0) {
+			ret = 0;
+			break;
+		}
+		udelay(10);
+	}
+
+	if (!count) {
+		ret = -EBUSY;
+		goto exit;
+	}
+
+	/* Enable WL control XTAL setting */
+	val8 = rtl8xxxu_read8(priv, REG_AFE_MISC);
+	val8 |= AFE_MISC_WL_XTAL_CTRL;
+	rtl8xxxu_write8(priv, REG_AFE_MISC, val8);
+
+	/* Enable falling edge triggering interrupt */
+	val8 = rtl8xxxu_read8(priv, REG_GPIO_INTM + 1);
+	val8 |= BIT(1);
+	rtl8xxxu_write8(priv, REG_GPIO_INTM + 1, val8);
+
+	/* Enable GPIO9 interrupt mode */
+	val8 = rtl8xxxu_read8(priv, REG_GPIO_IO_SEL_2 + 1);
+	val8 |= BIT(1);
+	rtl8xxxu_write8(priv, REG_GPIO_IO_SEL_2 + 1, val8);
+
+	/* Enable GPIO9 input mode */
+	val8 = rtl8xxxu_read8(priv, REG_GPIO_IO_SEL_2);
+	val8 &= ~BIT(1);
+	rtl8xxxu_write8(priv, REG_GPIO_IO_SEL_2, val8);
+
+	/* Enable HSISR GPIO[C:0] interrupt */
+	val8 = rtl8xxxu_read8(priv, REG_HSIMR);
+	val8 |= BIT(0);
+	rtl8xxxu_write8(priv, REG_HSIMR, val8);
+
+	/* Enable HSISR GPIO9 interrupt */
+	val8 = rtl8xxxu_read8(priv, REG_HSIMR + 2);
+	val8 |= BIT(1);
+	rtl8xxxu_write8(priv, REG_HSIMR + 2, val8);
+
+	val8 = rtl8xxxu_read8(priv, REG_MULTI_FUNC_CTRL);
+	val8 |= MULTI_WIFI_HW_ROF_EN;
+	rtl8xxxu_write8(priv, REG_MULTI_FUNC_CTRL, val8);
+
+	/* For GPIO9 internal pull high setting BIT(14) */
+	val8 = rtl8xxxu_read8(priv, REG_MULTI_FUNC_CTRL + 1);
+	val8 |= BIT(6);
+	rtl8xxxu_write8(priv, REG_MULTI_FUNC_CTRL + 1, val8);
+
+exit:
+	return ret;
+}
+
+static int rtl8723bu_power_on(struct rtl8xxxu_priv *priv)
+{
+	u8 val8;
+	u16 val16;
+	u32 val32;
+	int ret;
+
+	rtl8xxxu_disabled_to_emu(priv);
+
+	ret = rtl8723b_emu_to_active(priv);
+	if (ret)
+		goto exit;
+
+	/*
+	 * Enable MAC DMA/WMAC/SCHEDULE/SEC block
+	 * Set CR bit10 to enable 32k calibration.
+	 */
+	val16 = rtl8xxxu_read16(priv, REG_CR);
+	val16 |= (CR_HCI_TXDMA_ENABLE | CR_HCI_RXDMA_ENABLE |
+		  CR_TXDMA_ENABLE | CR_RXDMA_ENABLE |
+		  CR_PROTOCOL_ENABLE | CR_SCHEDULE_ENABLE |
+		  CR_MAC_TX_ENABLE | CR_MAC_RX_ENABLE |
+		  CR_SECURITY_ENABLE | CR_CALTIMER_ENABLE);
+	rtl8xxxu_write16(priv, REG_CR, val16);
+
+	/*
+	 * BT coexist power on settings. This is identical for 1 and 2
+	 * antenna parts.
+	 */
+	rtl8xxxu_write8(priv, REG_PAD_CTRL1 + 3, 0x20);
+
+	val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC);
+	val16 |= SYS_FUNC_BBRSTB | SYS_FUNC_BB_GLB_RSTN;
+	rtl8xxxu_write16(priv, REG_SYS_FUNC, val16);
+
+	rtl8xxxu_write8(priv, REG_BT_CONTROL_8723BU + 1, 0x18);
+	rtl8xxxu_write8(priv, REG_WLAN_ACT_CONTROL_8723B, 0x04);
+	rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00);
+	/* Antenna inverse */
+	rtl8xxxu_write8(priv, 0xfe08, 0x01);
+
+	val16 = rtl8xxxu_read16(priv, REG_PWR_DATA);
+	val16 |= PWR_DATA_EEPRPAD_RFE_CTRL_EN;
+	rtl8xxxu_write16(priv, REG_PWR_DATA, val16);
+
+	val32 = rtl8xxxu_read32(priv, REG_LEDCFG0);
+	val32 |= LEDCFG0_DPDT_SELECT;
+	rtl8xxxu_write32(priv, REG_LEDCFG0, val32);
+
+	val8 = rtl8xxxu_read8(priv, REG_PAD_CTRL1);
+	val8 &= ~PAD_CTRL1_SW_DPDT_SEL_DATA;
+	rtl8xxxu_write8(priv, REG_PAD_CTRL1, val8);
+exit:
+	return ret;
+}
+
+static void rtl8723bu_power_off(struct rtl8xxxu_priv *priv)
+{
+	u8 val8;
+	u16 val16;
+
+	rtl8xxxu_flush_fifo(priv);
+
+	/*
+	 * Disable TX report timer
+	 */
+	val8 = rtl8xxxu_read8(priv, REG_TX_REPORT_CTRL);
+	val8 &= ~TX_REPORT_CTRL_TIMER_ENABLE;
+	rtl8xxxu_write8(priv, REG_TX_REPORT_CTRL, val8);
+
+	rtl8xxxu_write8(priv, REG_CR, 0x0000);
+
+	rtl8xxxu_active_to_lps(priv);
+
+	/* Reset Firmware if running in RAM */
+	if (rtl8xxxu_read8(priv, REG_MCU_FW_DL) & MCU_FW_RAM_SEL)
+		rtl8xxxu_firmware_self_reset(priv);
+
+	/* Reset MCU */
+	val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC);
+	val16 &= ~SYS_FUNC_CPU_ENABLE;
+	rtl8xxxu_write16(priv, REG_SYS_FUNC, val16);
+
+	/* Reset MCU ready status */
+	rtl8xxxu_write8(priv, REG_MCU_FW_DL, 0x00);
+
+	rtl8723bu_active_to_emu(priv);
+
+	val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
+	val8 |= BIT(3); /* APS_FSMCO_HW_SUSPEND */
+	rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8);
+
+	/* 0x48[16] = 1 to enable GPIO9 as EXT wakeup */
+	val8 = rtl8xxxu_read8(priv, REG_GPIO_INTM + 2);
+	val8 |= BIT(0);
+	rtl8xxxu_write8(priv, REG_GPIO_INTM + 2, val8);
+}
+
+static void rtl8723b_enable_rf(struct rtl8xxxu_priv *priv)
+{
+	struct h2c_cmd h2c;
+	u32 val32;
+	u8 val8;
+
+	val32 = rtl8xxxu_read32(priv, REG_RX_WAIT_CCA);
+	val32 |= (BIT(22) | BIT(23));
+	rtl8xxxu_write32(priv, REG_RX_WAIT_CCA, val32);
+
+	/*
+	 * No indication anywhere as to what 0x0790 does. The 2 antenna
+	 * vendor code preserves bits 6-7 here.
+	 */
+	rtl8xxxu_write8(priv, 0x0790, 0x05);
+	/*
+	 * 0x0778 seems to be related to enabling the number of antennas
+	 * In the vendor driver halbtc8723b2ant_InitHwConfig() sets it
+	 * to 0x03, while halbtc8723b1ant_InitHwConfig() sets it to 0x01
+	 */
+	rtl8xxxu_write8(priv, 0x0778, 0x01);
+
+	val8 = rtl8xxxu_read8(priv, REG_GPIO_MUXCFG);
+	val8 |= BIT(5);
+	rtl8xxxu_write8(priv, REG_GPIO_MUXCFG, val8);
+
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_IQADJ_G1, 0x780);
+
+	rtl8723bu_write_btreg(priv, 0x3c, 0x15); /* BT TRx Mask on */
+
+	/*
+	 * Set BT grant to low
+	 */
+	memset(&h2c, 0, sizeof(struct h2c_cmd));
+	h2c.bt_grant.cmd = H2C_8723B_BT_GRANT;
+	h2c.bt_grant.data = 0;
+	rtl8xxxu_gen2_h2c_cmd(priv, &h2c, sizeof(h2c.bt_grant));
+
+	/*
+	 * WLAN action by PTA
+	 */
+	rtl8xxxu_write8(priv, REG_WLAN_ACT_CONTROL_8723B, 0x0c);
+
+	/*
+	 * BT select S0/S1 controlled by WiFi
+	 */
+	val8 = rtl8xxxu_read8(priv, 0x0067);
+	val8 |= BIT(5);
+	rtl8xxxu_write8(priv, 0x0067, val8);
+
+	val32 = rtl8xxxu_read32(priv, REG_PWR_DATA);
+	val32 |= PWR_DATA_EEPRPAD_RFE_CTRL_EN;
+	rtl8xxxu_write32(priv, REG_PWR_DATA, val32);
+
+	/*
+	 * Bits 6/7 are marked in/out ... but for what?
+	 */
+	rtl8xxxu_write8(priv, 0x0974, 0xff);
+
+	val32 = rtl8xxxu_read32(priv, REG_RFE_BUFFER);
+	val32 |= (BIT(0) | BIT(1));
+	rtl8xxxu_write32(priv, REG_RFE_BUFFER, val32);
+
+	rtl8xxxu_write8(priv, REG_RFE_CTRL_ANTA_SRC, 0x77);
+
+	val32 = rtl8xxxu_read32(priv, REG_LEDCFG0);
+	val32 &= ~BIT(24);
+	val32 |= BIT(23);
+	rtl8xxxu_write32(priv, REG_LEDCFG0, val32);
+
+	/*
+	 * Fix external switch Main->S1, Aux->S0
+	 */
+	val8 = rtl8xxxu_read8(priv, REG_PAD_CTRL1);
+	val8 &= ~BIT(0);
+	rtl8xxxu_write8(priv, REG_PAD_CTRL1, val8);
+
+	memset(&h2c, 0, sizeof(struct h2c_cmd));
+	h2c.ant_sel_rsv.cmd = H2C_8723B_ANT_SEL_RSV;
+	h2c.ant_sel_rsv.ant_inverse = 1;
+	h2c.ant_sel_rsv.int_switch_type = 0;
+	rtl8xxxu_gen2_h2c_cmd(priv, &h2c, sizeof(h2c.ant_sel_rsv));
+
+	/*
+	 * Different settings per different antenna position.
+	 *      Antenna Position:   | Normal   Inverse
+	 * --------------------------------------------------
+	 * Antenna switch to BT:    |  0x280,   0x00
+	 * Antenna switch to WiFi:  |  0x0,     0x280
+	 * Antenna switch to PTA:   |  0x200,   0x80
+	 */
+	rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x80);
+
+	/*
+	 * Software control, antenna at WiFi side
+	 */
+	rtl8723bu_set_ps_tdma(priv, 0x08, 0x00, 0x00, 0x00, 0x00);
+
+	rtl8xxxu_write32(priv, REG_BT_COEX_TABLE1, 0x55555555);
+	rtl8xxxu_write32(priv, REG_BT_COEX_TABLE2, 0x55555555);
+	rtl8xxxu_write32(priv, REG_BT_COEX_TABLE3, 0x00ffffff);
+	rtl8xxxu_write8(priv, REG_BT_COEX_TABLE4, 0x03);
+
+	memset(&h2c, 0, sizeof(struct h2c_cmd));
+	h2c.bt_info.cmd = H2C_8723B_BT_INFO;
+	h2c.bt_info.data = BIT(0);
+	rtl8xxxu_gen2_h2c_cmd(priv, &h2c, sizeof(h2c.bt_info));
+
+	memset(&h2c, 0, sizeof(struct h2c_cmd));
+	h2c.ignore_wlan.cmd = H2C_8723B_BT_IGNORE_WLANACT;
+	h2c.ignore_wlan.data = 0;
+	rtl8xxxu_gen2_h2c_cmd(priv, &h2c, sizeof(h2c.ignore_wlan));
+}
+
+static void rtl8723bu_init_aggregation(struct rtl8xxxu_priv *priv)
+{
+	u32 agg_rx;
+	u8 agg_ctrl;
+
+	/*
+	 * For now simply disable RX aggregation
+	 */
+	agg_ctrl = rtl8xxxu_read8(priv, REG_TRXDMA_CTRL);
+	agg_ctrl &= ~TRXDMA_CTRL_RXDMA_AGG_EN;
+
+	agg_rx = rtl8xxxu_read32(priv, REG_RXDMA_AGG_PG_TH);
+	agg_rx &= ~RXDMA_USB_AGG_ENABLE;
+	agg_rx &= ~0xff0f;
+
+	rtl8xxxu_write8(priv, REG_TRXDMA_CTRL, agg_ctrl);
+	rtl8xxxu_write32(priv, REG_RXDMA_AGG_PG_TH, agg_rx);
+}
+
+static void rtl8723bu_init_statistics(struct rtl8xxxu_priv *priv)
+{
+	u32 val32;
+
+	/* Time duration for NHM unit: 4us, 0x2710=40ms */
+	rtl8xxxu_write16(priv, REG_NHM_TIMER_8723B + 2, 0x2710);
+	rtl8xxxu_write16(priv, REG_NHM_TH9_TH10_8723B + 2, 0xffff);
+	rtl8xxxu_write32(priv, REG_NHM_TH3_TO_TH0_8723B, 0xffffff52);
+	rtl8xxxu_write32(priv, REG_NHM_TH7_TO_TH4_8723B, 0xffffffff);
+	/* TH8 */
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+	val32 |= 0xff;
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+	/* Enable CCK */
+	val32 = rtl8xxxu_read32(priv, REG_NHM_TH9_TH10_8723B);
+	val32 |= BIT(8) | BIT(9) | BIT(10);
+	rtl8xxxu_write32(priv, REG_NHM_TH9_TH10_8723B, val32);
+	/* Max power amongst all RX antennas */
+	val32 = rtl8xxxu_read32(priv, REG_OFDM0_FA_RSTC);
+	val32 |= BIT(7);
+	rtl8xxxu_write32(priv, REG_OFDM0_FA_RSTC, val32);
+}
+
+static s8 rtl8723b_cck_rssi(struct rtl8xxxu_priv *priv, struct rtl8723au_phy_stats *phy_stats)
+{
+	u8 cck_agc_rpt = phy_stats->cck_agc_rpt_ofdm_cfosho_a;
+	s8 rx_pwr_all = 0x00;
+	u8 vga_idx, lna_idx;
+
+	lna_idx = u8_get_bits(cck_agc_rpt, CCK_AGC_RPT_LNA_IDX_MASK);
+	vga_idx = u8_get_bits(cck_agc_rpt, CCK_AGC_RPT_VGA_IDX_MASK);
+
+	switch (lna_idx) {
+	case 6:
+		rx_pwr_all = -34 - (2 * vga_idx);
+		break;
+	case 4:
+		rx_pwr_all = -14 - (2 * vga_idx);
+		break;
+	case 1:
+		rx_pwr_all = 6 - (2 * vga_idx);
+		break;
+	case 0:
+		rx_pwr_all = 16 - (2 * vga_idx);
+		break;
+	default:
+		break;
+	}
+
+	return rx_pwr_all;
+}
+
+struct rtl8xxxu_fileops rtl8723bu_fops = {
+	.identify_chip = rtl8723bu_identify_chip,
+	.parse_efuse = rtl8723bu_parse_efuse,
+	.load_firmware = rtl8723bu_load_firmware,
+	.power_on = rtl8723bu_power_on,
+	.power_off = rtl8723bu_power_off,
+	.read_efuse = rtl8xxxu_read_efuse,
+	.reset_8051 = rtl8723bu_reset_8051,
+	.llt_init = rtl8xxxu_auto_llt_table,
+	.init_phy_bb = rtl8723bu_init_phy_bb,
+	.init_phy_rf = rtl8723bu_init_phy_rf,
+	.phy_init_antenna_selection = rtl8723bu_phy_init_antenna_selection,
+	.phy_lc_calibrate = rtl8723a_phy_lc_calibrate,
+	.phy_iq_calibrate = rtl8723bu_phy_iq_calibrate,
+	.config_channel = rtl8xxxu_gen2_config_channel,
+	.parse_rx_desc = rtl8xxxu_parse_rxdesc24,
+	.parse_phystats = rtl8723au_rx_parse_phystats,
+	.init_aggregation = rtl8723bu_init_aggregation,
+	.init_statistics = rtl8723bu_init_statistics,
+	.init_burst = rtl8xxxu_init_burst,
+	.enable_rf = rtl8723b_enable_rf,
+	.disable_rf = rtl8xxxu_gen2_disable_rf,
+	.usb_quirks = rtl8xxxu_gen2_usb_quirks,
+	.set_tx_power = rtl8723b_set_tx_power,
+	.update_rate_mask = rtl8xxxu_gen2_update_rate_mask,
+	.report_connect = rtl8xxxu_gen2_report_connect,
+	.report_rssi = rtl8xxxu_gen2_report_rssi,
+	.fill_txdesc = rtl8xxxu_fill_txdesc_v2,
+	.set_crystal_cap = rtl8723a_set_crystal_cap,
+	.cck_rssi = rtl8723b_cck_rssi,
+	.writeN_block_size = 1024,
+	.tx_desc_size = sizeof(struct rtl8xxxu_txdesc40),
+	.rx_desc_size = sizeof(struct rtl8xxxu_rxdesc24),
+	.has_s0s1 = 1,
+	.has_tx_report = 1,
+	.gen2_thermal_meter = 1,
+	.needs_full_init = 1,
+	.init_reg_hmtfr = 1,
+	.ampdu_max_time = 0x5e,
+	.ustime_tsf_edca = 0x50,
+	.max_aggr_num = 0x0c14,
+	.supports_ap = 1,
+	.max_macid_num = 128,
+	.adda_1t_init = 0x01c00014,
+	.adda_1t_path_on = 0x01c00014,
+	.adda_2t_path_on_a = 0x01c00014,
+	.adda_2t_path_on_b = 0x01c00014,
+	.trxff_boundary = 0x3f7f,
+	.pbp_rx = PBP_PAGE_SIZE_256,
+	.pbp_tx = PBP_PAGE_SIZE_256,
+	.mactable = rtl8723b_mac_init_table,
+	.total_page_num = TX_TOTAL_PAGE_NUM_8723B,
+	.page_num_hi = TX_PAGE_NUM_HI_PQ_8723B,
+	.page_num_lo = TX_PAGE_NUM_LO_PQ_8723B,
+	.page_num_norm = TX_PAGE_NUM_NORM_PQ_8723B,
+};
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
new file mode 100644
index 0000000000..5d102a1246
--- /dev/null
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
@@ -0,0 +1,7977 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * RTL8XXXU mac80211 USB driver
+ *
+ * Copyright (c) 2014 - 2017 Jes Sorensen <Jes.Sorensen@gmail.com>
+ *
+ * Portions, notably calibration code:
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This driver was written as a replacement for the vendor provided
+ * rtl8723au driver. As the Realtek 8xxx chips are very similar in
+ * their programming interface, I have started adding support for
+ * additional 8xxx chips like the 8192cu, 8188cus, etc.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <linux/usb.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/wireless.h>
+#include <linux/firmware.h>
+#include <linux/moduleparam.h>
+#include <net/mac80211.h>
+#include "rtl8xxxu.h"
+#include "rtl8xxxu_regs.h"
+
+#define DRIVER_NAME "rtl8xxxu"
+
+int rtl8xxxu_debug;
+static bool rtl8xxxu_ht40_2g;
+static bool rtl8xxxu_dma_aggregation;
+static int rtl8xxxu_dma_agg_timeout = -1;
+static int rtl8xxxu_dma_agg_pages = -1;
+
+MODULE_AUTHOR("Jes Sorensen <Jes.Sorensen@gmail.com>");
+MODULE_DESCRIPTION("RTL8XXXu USB mac80211 Wireless LAN Driver");
+MODULE_LICENSE("GPL");
+MODULE_FIRMWARE("rtlwifi/rtl8723aufw_A.bin");
+MODULE_FIRMWARE("rtlwifi/rtl8723aufw_B.bin");
+MODULE_FIRMWARE("rtlwifi/rtl8723aufw_B_NoBT.bin");
+MODULE_FIRMWARE("rtlwifi/rtl8188eufw.bin");
+MODULE_FIRMWARE("rtlwifi/rtl8192cufw_A.bin");
+MODULE_FIRMWARE("rtlwifi/rtl8192cufw_B.bin");
+MODULE_FIRMWARE("rtlwifi/rtl8192cufw_TMSC.bin");
+MODULE_FIRMWARE("rtlwifi/rtl8192eu_nic.bin");
+MODULE_FIRMWARE("rtlwifi/rtl8723bu_nic.bin");
+MODULE_FIRMWARE("rtlwifi/rtl8723bu_bt.bin");
+MODULE_FIRMWARE("rtlwifi/rtl8188fufw.bin");
+MODULE_FIRMWARE("rtlwifi/rtl8710bufw_SMIC.bin");
+MODULE_FIRMWARE("rtlwifi/rtl8710bufw_UMC.bin");
+MODULE_FIRMWARE("rtlwifi/rtl8192fufw.bin");
+
+module_param_named(debug, rtl8xxxu_debug, int, 0600);
+MODULE_PARM_DESC(debug, "Set debug mask");
+module_param_named(ht40_2g, rtl8xxxu_ht40_2g, bool, 0600);
+MODULE_PARM_DESC(ht40_2g, "Enable HT40 support on the 2.4GHz band");
+module_param_named(dma_aggregation, rtl8xxxu_dma_aggregation, bool, 0600);
+MODULE_PARM_DESC(dma_aggregation, "Enable DMA packet aggregation");
+module_param_named(dma_agg_timeout, rtl8xxxu_dma_agg_timeout, int, 0600);
+MODULE_PARM_DESC(dma_agg_timeout, "Set DMA aggregation timeout (range 1-127)");
+module_param_named(dma_agg_pages, rtl8xxxu_dma_agg_pages, int, 0600);
+MODULE_PARM_DESC(dma_agg_pages, "Set DMA aggregation pages (range 1-127, 0 to disable)");
+
+#define USB_VENDOR_ID_REALTEK		0x0bda
+#define RTL8XXXU_RX_URBS		32
+#define RTL8XXXU_RX_URB_PENDING_WATER	8
+#define RTL8XXXU_TX_URBS		64
+#define RTL8XXXU_TX_URB_LOW_WATER	25
+#define RTL8XXXU_TX_URB_HIGH_WATER	32
+
+static int rtl8xxxu_submit_rx_urb(struct rtl8xxxu_priv *priv,
+				  struct rtl8xxxu_rx_urb *rx_urb);
+
+static struct ieee80211_rate rtl8xxxu_rates[] = {
+	{ .bitrate = 10, .hw_value = DESC_RATE_1M, .flags = 0 },
+	{ .bitrate = 20, .hw_value = DESC_RATE_2M, .flags = 0 },
+	{ .bitrate = 55, .hw_value = DESC_RATE_5_5M, .flags = 0 },
+	{ .bitrate = 110, .hw_value = DESC_RATE_11M, .flags = 0 },
+	{ .bitrate = 60, .hw_value = DESC_RATE_6M, .flags = 0 },
+	{ .bitrate = 90, .hw_value = DESC_RATE_9M, .flags = 0 },
+	{ .bitrate = 120, .hw_value = DESC_RATE_12M, .flags = 0 },
+	{ .bitrate = 180, .hw_value = DESC_RATE_18M, .flags = 0 },
+	{ .bitrate = 240, .hw_value = DESC_RATE_24M, .flags = 0 },
+	{ .bitrate = 360, .hw_value = DESC_RATE_36M, .flags = 0 },
+	{ .bitrate = 480, .hw_value = DESC_RATE_48M, .flags = 0 },
+	{ .bitrate = 540, .hw_value = DESC_RATE_54M, .flags = 0 },
+};
+
+static struct ieee80211_channel rtl8xxxu_channels_2g[] = {
+	{ .band = NL80211_BAND_2GHZ, .center_freq = 2412,
+	  .hw_value = 1, .max_power = 30 },
+	{ .band = NL80211_BAND_2GHZ, .center_freq = 2417,
+	  .hw_value = 2, .max_power = 30 },
+	{ .band = NL80211_BAND_2GHZ, .center_freq = 2422,
+	  .hw_value = 3, .max_power = 30 },
+	{ .band = NL80211_BAND_2GHZ, .center_freq = 2427,
+	  .hw_value = 4, .max_power = 30 },
+	{ .band = NL80211_BAND_2GHZ, .center_freq = 2432,
+	  .hw_value = 5, .max_power = 30 },
+	{ .band = NL80211_BAND_2GHZ, .center_freq = 2437,
+	  .hw_value = 6, .max_power = 30 },
+	{ .band = NL80211_BAND_2GHZ, .center_freq = 2442,
+	  .hw_value = 7, .max_power = 30 },
+	{ .band = NL80211_BAND_2GHZ, .center_freq = 2447,
+	  .hw_value = 8, .max_power = 30 },
+	{ .band = NL80211_BAND_2GHZ, .center_freq = 2452,
+	  .hw_value = 9, .max_power = 30 },
+	{ .band = NL80211_BAND_2GHZ, .center_freq = 2457,
+	  .hw_value = 10, .max_power = 30 },
+	{ .band = NL80211_BAND_2GHZ, .center_freq = 2462,
+	  .hw_value = 11, .max_power = 30 },
+	{ .band = NL80211_BAND_2GHZ, .center_freq = 2467,
+	  .hw_value = 12, .max_power = 30 },
+	{ .band = NL80211_BAND_2GHZ, .center_freq = 2472,
+	  .hw_value = 13, .max_power = 30 },
+	{ .band = NL80211_BAND_2GHZ, .center_freq = 2484,
+	  .hw_value = 14, .max_power = 30 }
+};
+
+static struct ieee80211_supported_band rtl8xxxu_supported_band = {
+	.channels = rtl8xxxu_channels_2g,
+	.n_channels = ARRAY_SIZE(rtl8xxxu_channels_2g),
+	.bitrates = rtl8xxxu_rates,
+	.n_bitrates = ARRAY_SIZE(rtl8xxxu_rates),
+};
+
+const struct rtl8xxxu_reg8val rtl8xxxu_gen1_mac_init_table[] = {
+	{0x420, 0x80}, {0x423, 0x00}, {0x430, 0x00}, {0x431, 0x00},
+	{0x432, 0x00}, {0x433, 0x01}, {0x434, 0x04}, {0x435, 0x05},
+	{0x436, 0x06}, {0x437, 0x07}, {0x438, 0x00}, {0x439, 0x00},
+	{0x43a, 0x00}, {0x43b, 0x01}, {0x43c, 0x04}, {0x43d, 0x05},
+	{0x43e, 0x06}, {0x43f, 0x07}, {0x440, 0x5d}, {0x441, 0x01},
+	{0x442, 0x00}, {0x444, 0x15}, {0x445, 0xf0}, {0x446, 0x0f},
+	{0x447, 0x00}, {0x458, 0x41}, {0x459, 0xa8}, {0x45a, 0x72},
+	{0x45b, 0xb9}, {0x460, 0x66}, {0x461, 0x66}, {0x462, 0x08},
+	{0x463, 0x03}, {0x4c8, 0xff}, {0x4c9, 0x08}, {0x4cc, 0xff},
+	{0x4cd, 0xff}, {0x4ce, 0x01}, {0x500, 0x26}, {0x501, 0xa2},
+	{0x502, 0x2f}, {0x503, 0x00}, {0x504, 0x28}, {0x505, 0xa3},
+	{0x506, 0x5e}, {0x507, 0x00}, {0x508, 0x2b}, {0x509, 0xa4},
+	{0x50a, 0x5e}, {0x50b, 0x00}, {0x50c, 0x4f}, {0x50d, 0xa4},
+	{0x50e, 0x00}, {0x50f, 0x00}, {0x512, 0x1c}, {0x514, 0x0a},
+	{0x515, 0x10}, {0x516, 0x0a}, {0x517, 0x10}, {0x51a, 0x16},
+	{0x524, 0x0f}, {0x525, 0x4f}, {0x546, 0x40}, {0x547, 0x00},
+	{0x550, 0x10}, {0x551, 0x10}, {0x559, 0x02}, {0x55a, 0x02},
+	{0x55d, 0xff}, {0x605, 0x30}, {0x608, 0x0e}, {0x609, 0x2a},
+	{0x652, 0x20}, {0x63c, 0x0a}, {0x63d, 0x0a}, {0x63e, 0x0e},
+	{0x63f, 0x0e}, {0x66e, 0x05}, {0x700, 0x21}, {0x701, 0x43},
+	{0x702, 0x65}, {0x703, 0x87}, {0x708, 0x21}, {0x709, 0x43},
+	{0x70a, 0x65}, {0x70b, 0x87}, {0xffff, 0xff},
+};
+
+static const struct rtl8xxxu_reg32val rtl8723a_phy_1t_init_table[] = {
+	{0x800, 0x80040000}, {0x804, 0x00000003},
+	{0x808, 0x0000fc00}, {0x80c, 0x0000000a},
+	{0x810, 0x10001331}, {0x814, 0x020c3d10},
+	{0x818, 0x02200385}, {0x81c, 0x00000000},
+	{0x820, 0x01000100}, {0x824, 0x00390004},
+	{0x828, 0x00000000}, {0x82c, 0x00000000},
+	{0x830, 0x00000000}, {0x834, 0x00000000},
+	{0x838, 0x00000000}, {0x83c, 0x00000000},
+	{0x840, 0x00010000}, {0x844, 0x00000000},
+	{0x848, 0x00000000}, {0x84c, 0x00000000},
+	{0x850, 0x00000000}, {0x854, 0x00000000},
+	{0x858, 0x569a569a}, {0x85c, 0x001b25a4},
+	{0x860, 0x66f60110}, {0x864, 0x061f0130},
+	{0x868, 0x00000000}, {0x86c, 0x32323200},
+	{0x870, 0x07000760}, {0x874, 0x22004000},
+	{0x878, 0x00000808}, {0x87c, 0x00000000},
+	{0x880, 0xc0083070}, {0x884, 0x000004d5},
+	{0x888, 0x00000000}, {0x88c, 0xccc000c0},
+	{0x890, 0x00000800}, {0x894, 0xfffffffe},
+	{0x898, 0x40302010}, {0x89c, 0x00706050},
+	{0x900, 0x00000000}, {0x904, 0x00000023},
+	{0x908, 0x00000000}, {0x90c, 0x81121111},
+	{0xa00, 0x00d047c8}, {0xa04, 0x80ff000c},
+	{0xa08, 0x8c838300}, {0xa0c, 0x2e68120f},
+	{0xa10, 0x9500bb78}, {0xa14, 0x11144028},
+	{0xa18, 0x00881117}, {0xa1c, 0x89140f00},
+	{0xa20, 0x1a1b0000}, {0xa24, 0x090e1317},
+	{0xa28, 0x00000204}, {0xa2c, 0x00d30000},
+	{0xa70, 0x101fbf00}, {0xa74, 0x00000007},
+	{0xa78, 0x00000900},
+	{0xc00, 0x48071d40}, {0xc04, 0x03a05611},
+	{0xc08, 0x000000e4}, {0xc0c, 0x6c6c6c6c},
+	{0xc10, 0x08800000}, {0xc14, 0x40000100},
+	{0xc18, 0x08800000}, {0xc1c, 0x40000100},
+	{0xc20, 0x00000000}, {0xc24, 0x00000000},
+	{0xc28, 0x00000000}, {0xc2c, 0x00000000},
+	{0xc30, 0x69e9ac44}, {0xc34, 0x469652af},
+	{0xc38, 0x49795994}, {0xc3c, 0x0a97971c},
+	{0xc40, 0x1f7c403f}, {0xc44, 0x000100b7},
+	{0xc48, 0xec020107}, {0xc4c, 0x007f037f},
+	{0xc50, 0x69543420}, {0xc54, 0x43bc0094},
+	{0xc58, 0x69543420}, {0xc5c, 0x433c0094},
+	{0xc60, 0x00000000}, {0xc64, 0x7112848b},
+	{0xc68, 0x47c00bff}, {0xc6c, 0x00000036},
+	{0xc70, 0x2c7f000d}, {0xc74, 0x018610db},
+	{0xc78, 0x0000001f}, {0xc7c, 0x00b91612},
+	{0xc80, 0x40000100}, {0xc84, 0x20f60000},
+	{0xc88, 0x40000100}, {0xc8c, 0x20200000},
+	{0xc90, 0x00121820}, {0xc94, 0x00000000},
+	{0xc98, 0x00121820}, {0xc9c, 0x00007f7f},
+	{0xca0, 0x00000000}, {0xca4, 0x00000080},
+	{0xca8, 0x00000000}, {0xcac, 0x00000000},
+	{0xcb0, 0x00000000}, {0xcb4, 0x00000000},
+	{0xcb8, 0x00000000}, {0xcbc, 0x28000000},
+	{0xcc0, 0x00000000}, {0xcc4, 0x00000000},
+	{0xcc8, 0x00000000}, {0xccc, 0x00000000},
+	{0xcd0, 0x00000000}, {0xcd4, 0x00000000},
+	{0xcd8, 0x64b22427}, {0xcdc, 0x00766932},
+	{0xce0, 0x00222222}, {0xce4, 0x00000000},
+	{0xce8, 0x37644302}, {0xcec, 0x2f97d40c},
+	{0xd00, 0x00080740}, {0xd04, 0x00020401},
+	{0xd08, 0x0000907f}, {0xd0c, 0x20010201},
+	{0xd10, 0xa0633333}, {0xd14, 0x3333bc43},
+	{0xd18, 0x7a8f5b6b}, {0xd2c, 0xcc979975},
+	{0xd30, 0x00000000}, {0xd34, 0x80608000},
+	{0xd38, 0x00000000}, {0xd3c, 0x00027293},
+	{0xd40, 0x00000000}, {0xd44, 0x00000000},
+	{0xd48, 0x00000000}, {0xd4c, 0x00000000},
+	{0xd50, 0x6437140a}, {0xd54, 0x00000000},
+	{0xd58, 0x00000000}, {0xd5c, 0x30032064},
+	{0xd60, 0x4653de68}, {0xd64, 0x04518a3c},
+	{0xd68, 0x00002101}, {0xd6c, 0x2a201c16},
+	{0xd70, 0x1812362e}, {0xd74, 0x322c2220},
+	{0xd78, 0x000e3c24}, {0xe00, 0x2a2a2a2a},
+	{0xe04, 0x2a2a2a2a}, {0xe08, 0x03902a2a},
+	{0xe10, 0x2a2a2a2a}, {0xe14, 0x2a2a2a2a},
+	{0xe18, 0x2a2a2a2a}, {0xe1c, 0x2a2a2a2a},
+	{0xe28, 0x00000000}, {0xe30, 0x1000dc1f},
+	{0xe34, 0x10008c1f}, {0xe38, 0x02140102},
+	{0xe3c, 0x681604c2}, {0xe40, 0x01007c00},
+	{0xe44, 0x01004800}, {0xe48, 0xfb000000},
+	{0xe4c, 0x000028d1}, {0xe50, 0x1000dc1f},
+	{0xe54, 0x10008c1f}, {0xe58, 0x02140102},
+	{0xe5c, 0x28160d05}, {0xe60, 0x00000008},
+	{0xe68, 0x001b25a4}, {0xe6c, 0x631b25a0},
+	{0xe70, 0x631b25a0}, {0xe74, 0x081b25a0},
+	{0xe78, 0x081b25a0}, {0xe7c, 0x081b25a0},
+	{0xe80, 0x081b25a0}, {0xe84, 0x631b25a0},
+	{0xe88, 0x081b25a0}, {0xe8c, 0x631b25a0},
+	{0xed0, 0x631b25a0}, {0xed4, 0x631b25a0},
+	{0xed8, 0x631b25a0}, {0xedc, 0x001b25a0},
+	{0xee0, 0x001b25a0}, {0xeec, 0x6b1b25a0},
+	{0xf14, 0x00000003}, {0xf4c, 0x00000000},
+	{0xf00, 0x00000300},
+	{0xffff, 0xffffffff},
+};
+
+static const struct rtl8xxxu_reg32val rtl8192cu_phy_2t_init_table[] = {
+	{0x024, 0x0011800f}, {0x028, 0x00ffdb83},
+	{0x800, 0x80040002}, {0x804, 0x00000003},
+	{0x808, 0x0000fc00}, {0x80c, 0x0000000a},
+	{0x810, 0x10000330}, {0x814, 0x020c3d10},
+	{0x818, 0x02200385}, {0x81c, 0x00000000},
+	{0x820, 0x01000100}, {0x824, 0x00390004},
+	{0x828, 0x01000100}, {0x82c, 0x00390004},
+	{0x830, 0x27272727}, {0x834, 0x27272727},
+	{0x838, 0x27272727}, {0x83c, 0x27272727},
+	{0x840, 0x00010000}, {0x844, 0x00010000},
+	{0x848, 0x27272727}, {0x84c, 0x27272727},
+	{0x850, 0x00000000}, {0x854, 0x00000000},
+	{0x858, 0x569a569a}, {0x85c, 0x0c1b25a4},
+	{0x860, 0x66e60230}, {0x864, 0x061f0130},
+	{0x868, 0x27272727}, {0x86c, 0x2b2b2b27},
+	{0x870, 0x07000700}, {0x874, 0x22184000},
+	{0x878, 0x08080808}, {0x87c, 0x00000000},
+	{0x880, 0xc0083070}, {0x884, 0x000004d5},
+	{0x888, 0x00000000}, {0x88c, 0xcc0000c0},
+	{0x890, 0x00000800}, {0x894, 0xfffffffe},
+	{0x898, 0x40302010}, {0x89c, 0x00706050},
+	{0x900, 0x00000000}, {0x904, 0x00000023},
+	{0x908, 0x00000000}, {0x90c, 0x81121313},
+	{0xa00, 0x00d047c8}, {0xa04, 0x80ff000c},
+	{0xa08, 0x8c838300}, {0xa0c, 0x2e68120f},
+	{0xa10, 0x9500bb78}, {0xa14, 0x11144028},
+	{0xa18, 0x00881117}, {0xa1c, 0x89140f00},
+	{0xa20, 0x1a1b0000}, {0xa24, 0x090e1317},
+	{0xa28, 0x00000204}, {0xa2c, 0x00d30000},
+	{0xa70, 0x101fbf00}, {0xa74, 0x00000007},
+	{0xc00, 0x48071d40}, {0xc04, 0x03a05633},
+	{0xc08, 0x000000e4}, {0xc0c, 0x6c6c6c6c},
+	{0xc10, 0x08800000}, {0xc14, 0x40000100},
+	{0xc18, 0x08800000}, {0xc1c, 0x40000100},
+	{0xc20, 0x00000000}, {0xc24, 0x00000000},
+	{0xc28, 0x00000000}, {0xc2c, 0x00000000},
+	{0xc30, 0x69e9ac44}, {0xc34, 0x469652cf},
+	{0xc38, 0x49795994}, {0xc3c, 0x0a97971c},
+	{0xc40, 0x1f7c403f}, {0xc44, 0x000100b7},
+	{0xc48, 0xec020107}, {0xc4c, 0x007f037f},
+	{0xc50, 0x69543420}, {0xc54, 0x43bc0094},
+	{0xc58, 0x69543420}, {0xc5c, 0x433c0094},
+	{0xc60, 0x00000000}, {0xc64, 0x5116848b},
+	{0xc68, 0x47c00bff}, {0xc6c, 0x00000036},
+	{0xc70, 0x2c7f000d}, {0xc74, 0x2186115b},
+	{0xc78, 0x0000001f}, {0xc7c, 0x00b99612},
+	{0xc80, 0x40000100}, {0xc84, 0x20f60000},
+	{0xc88, 0x40000100}, {0xc8c, 0xa0e40000},
+	{0xc90, 0x00121820}, {0xc94, 0x00000000},
+	{0xc98, 0x00121820}, {0xc9c, 0x00007f7f},
+	{0xca0, 0x00000000}, {0xca4, 0x00000080},
+	{0xca8, 0x00000000}, {0xcac, 0x00000000},
+	{0xcb0, 0x00000000}, {0xcb4, 0x00000000},
+	{0xcb8, 0x00000000}, {0xcbc, 0x28000000},
+	{0xcc0, 0x00000000}, {0xcc4, 0x00000000},
+	{0xcc8, 0x00000000}, {0xccc, 0x00000000},
+	{0xcd0, 0x00000000}, {0xcd4, 0x00000000},
+	{0xcd8, 0x64b22427}, {0xcdc, 0x00766932},
+	{0xce0, 0x00222222}, {0xce4, 0x00000000},
+	{0xce8, 0x37644302}, {0xcec, 0x2f97d40c},
+	{0xd00, 0x00080740}, {0xd04, 0x00020403},
+	{0xd08, 0x0000907f}, {0xd0c, 0x20010201},
+	{0xd10, 0xa0633333}, {0xd14, 0x3333bc43},
+	{0xd18, 0x7a8f5b6b}, {0xd2c, 0xcc979975},
+	{0xd30, 0x00000000}, {0xd34, 0x80608000},
+	{0xd38, 0x00000000}, {0xd3c, 0x00027293},
+	{0xd40, 0x00000000}, {0xd44, 0x00000000},
+	{0xd48, 0x00000000}, {0xd4c, 0x00000000},
+	{0xd50, 0x6437140a}, {0xd54, 0x00000000},
+	{0xd58, 0x00000000}, {0xd5c, 0x30032064},
+	{0xd60, 0x4653de68}, {0xd64, 0x04518a3c},
+	{0xd68, 0x00002101}, {0xd6c, 0x2a201c16},
+	{0xd70, 0x1812362e}, {0xd74, 0x322c2220},
+	{0xd78, 0x000e3c24}, {0xe00, 0x2a2a2a2a},
+	{0xe04, 0x2a2a2a2a}, {0xe08, 0x03902a2a},
+	{0xe10, 0x2a2a2a2a}, {0xe14, 0x2a2a2a2a},
+	{0xe18, 0x2a2a2a2a}, {0xe1c, 0x2a2a2a2a},
+	{0xe28, 0x00000000}, {0xe30, 0x1000dc1f},
+	{0xe34, 0x10008c1f}, {0xe38, 0x02140102},
+	{0xe3c, 0x681604c2}, {0xe40, 0x01007c00},
+	{0xe44, 0x01004800}, {0xe48, 0xfb000000},
+	{0xe4c, 0x000028d1}, {0xe50, 0x1000dc1f},
+	{0xe54, 0x10008c1f}, {0xe58, 0x02140102},
+	{0xe5c, 0x28160d05}, {0xe60, 0x00000010},
+	{0xe68, 0x001b25a4}, {0xe6c, 0x63db25a4},
+	{0xe70, 0x63db25a4}, {0xe74, 0x0c1b25a4},
+	{0xe78, 0x0c1b25a4}, {0xe7c, 0x0c1b25a4},
+	{0xe80, 0x0c1b25a4}, {0xe84, 0x63db25a4},
+	{0xe88, 0x0c1b25a4}, {0xe8c, 0x63db25a4},
+	{0xed0, 0x63db25a4}, {0xed4, 0x63db25a4},
+	{0xed8, 0x63db25a4}, {0xedc, 0x001b25a4},
+	{0xee0, 0x001b25a4}, {0xeec, 0x6fdb25a4},
+	{0xf14, 0x00000003}, {0xf4c, 0x00000000},
+	{0xf00, 0x00000300},
+	{0xffff, 0xffffffff},
+};
+
+static const struct rtl8xxxu_reg32val rtl8188ru_phy_1t_highpa_table[] = {
+	{0x024, 0x0011800f}, {0x028, 0x00ffdb83},
+	{0x040, 0x000c0004}, {0x800, 0x80040000},
+	{0x804, 0x00000001}, {0x808, 0x0000fc00},
+	{0x80c, 0x0000000a}, {0x810, 0x10005388},
+	{0x814, 0x020c3d10}, {0x818, 0x02200385},
+	{0x81c, 0x00000000}, {0x820, 0x01000100},
+	{0x824, 0x00390204}, {0x828, 0x00000000},
+	{0x82c, 0x00000000}, {0x830, 0x00000000},
+	{0x834, 0x00000000}, {0x838, 0x00000000},
+	{0x83c, 0x00000000}, {0x840, 0x00010000},
+	{0x844, 0x00000000}, {0x848, 0x00000000},
+	{0x84c, 0x00000000}, {0x850, 0x00000000},
+	{0x854, 0x00000000}, {0x858, 0x569a569a},
+	{0x85c, 0x001b25a4}, {0x860, 0x66e60230},
+	{0x864, 0x061f0130}, {0x868, 0x00000000},
+	{0x86c, 0x20202000}, {0x870, 0x03000300},
+	{0x874, 0x22004000}, {0x878, 0x00000808},
+	{0x87c, 0x00ffc3f1}, {0x880, 0xc0083070},
+	{0x884, 0x000004d5}, {0x888, 0x00000000},
+	{0x88c, 0xccc000c0}, {0x890, 0x00000800},
+	{0x894, 0xfffffffe}, {0x898, 0x40302010},
+	{0x89c, 0x00706050}, {0x900, 0x00000000},
+	{0x904, 0x00000023}, {0x908, 0x00000000},
+	{0x90c, 0x81121111}, {0xa00, 0x00d047c8},
+	{0xa04, 0x80ff000c}, {0xa08, 0x8c838300},
+	{0xa0c, 0x2e68120f}, {0xa10, 0x9500bb78},
+	{0xa14, 0x11144028}, {0xa18, 0x00881117},
+	{0xa1c, 0x89140f00}, {0xa20, 0x15160000},
+	{0xa24, 0x070b0f12}, {0xa28, 0x00000104},
+	{0xa2c, 0x00d30000}, {0xa70, 0x101fbf00},
+	{0xa74, 0x00000007}, {0xc00, 0x48071d40},
+	{0xc04, 0x03a05611}, {0xc08, 0x000000e4},
+	{0xc0c, 0x6c6c6c6c}, {0xc10, 0x08800000},
+	{0xc14, 0x40000100}, {0xc18, 0x08800000},
+	{0xc1c, 0x40000100}, {0xc20, 0x00000000},
+	{0xc24, 0x00000000}, {0xc28, 0x00000000},
+	{0xc2c, 0x00000000}, {0xc30, 0x69e9ac44},
+	{0xc34, 0x469652cf}, {0xc38, 0x49795994},
+	{0xc3c, 0x0a97971c}, {0xc40, 0x1f7c403f},
+	{0xc44, 0x000100b7}, {0xc48, 0xec020107},
+	{0xc4c, 0x007f037f}, {0xc50, 0x6954342e},
+	{0xc54, 0x43bc0094}, {0xc58, 0x6954342f},
+	{0xc5c, 0x433c0094}, {0xc60, 0x00000000},
+	{0xc64, 0x5116848b}, {0xc68, 0x47c00bff},
+	{0xc6c, 0x00000036}, {0xc70, 0x2c46000d},
+	{0xc74, 0x018610db}, {0xc78, 0x0000001f},
+	{0xc7c, 0x00b91612}, {0xc80, 0x24000090},
+	{0xc84, 0x20f60000}, {0xc88, 0x24000090},
+	{0xc8c, 0x20200000}, {0xc90, 0x00121820},
+	{0xc94, 0x00000000}, {0xc98, 0x00121820},
+	{0xc9c, 0x00007f7f}, {0xca0, 0x00000000},
+	{0xca4, 0x00000080}, {0xca8, 0x00000000},
+	{0xcac, 0x00000000}, {0xcb0, 0x00000000},
+	{0xcb4, 0x00000000}, {0xcb8, 0x00000000},
+	{0xcbc, 0x28000000}, {0xcc0, 0x00000000},
+	{0xcc4, 0x00000000}, {0xcc8, 0x00000000},
+	{0xccc, 0x00000000}, {0xcd0, 0x00000000},
+	{0xcd4, 0x00000000}, {0xcd8, 0x64b22427},
+	{0xcdc, 0x00766932}, {0xce0, 0x00222222},
+	{0xce4, 0x00000000}, {0xce8, 0x37644302},
+	{0xcec, 0x2f97d40c}, {0xd00, 0x00080740},
+	{0xd04, 0x00020401}, {0xd08, 0x0000907f},
+	{0xd0c, 0x20010201}, {0xd10, 0xa0633333},
+	{0xd14, 0x3333bc43}, {0xd18, 0x7a8f5b6b},
+	{0xd2c, 0xcc979975}, {0xd30, 0x00000000},
+	{0xd34, 0x80608000}, {0xd38, 0x00000000},
+	{0xd3c, 0x00027293}, {0xd40, 0x00000000},
+	{0xd44, 0x00000000}, {0xd48, 0x00000000},
+	{0xd4c, 0x00000000}, {0xd50, 0x6437140a},
+	{0xd54, 0x00000000}, {0xd58, 0x00000000},
+	{0xd5c, 0x30032064}, {0xd60, 0x4653de68},
+	{0xd64, 0x04518a3c}, {0xd68, 0x00002101},
+	{0xd6c, 0x2a201c16}, {0xd70, 0x1812362e},
+	{0xd74, 0x322c2220}, {0xd78, 0x000e3c24},
+	{0xe00, 0x24242424}, {0xe04, 0x24242424},
+	{0xe08, 0x03902024}, {0xe10, 0x24242424},
+	{0xe14, 0x24242424}, {0xe18, 0x24242424},
+	{0xe1c, 0x24242424}, {0xe28, 0x00000000},
+	{0xe30, 0x1000dc1f}, {0xe34, 0x10008c1f},
+	{0xe38, 0x02140102}, {0xe3c, 0x681604c2},
+	{0xe40, 0x01007c00}, {0xe44, 0x01004800},
+	{0xe48, 0xfb000000}, {0xe4c, 0x000028d1},
+	{0xe50, 0x1000dc1f}, {0xe54, 0x10008c1f},
+	{0xe58, 0x02140102}, {0xe5c, 0x28160d05},
+	{0xe60, 0x00000008}, {0xe68, 0x001b25a4},
+	{0xe6c, 0x631b25a0}, {0xe70, 0x631b25a0},
+	{0xe74, 0x081b25a0}, {0xe78, 0x081b25a0},
+	{0xe7c, 0x081b25a0}, {0xe80, 0x081b25a0},
+	{0xe84, 0x631b25a0}, {0xe88, 0x081b25a0},
+	{0xe8c, 0x631b25a0}, {0xed0, 0x631b25a0},
+	{0xed4, 0x631b25a0}, {0xed8, 0x631b25a0},
+	{0xedc, 0x001b25a0}, {0xee0, 0x001b25a0},
+	{0xeec, 0x6b1b25a0}, {0xee8, 0x31555448},
+	{0xf14, 0x00000003}, {0xf4c, 0x00000000},
+	{0xf00, 0x00000300},
+	{0xffff, 0xffffffff},
+};
+
+static const struct rtl8xxxu_reg32val rtl8xxx_agc_standard_table[] = {
+	{0xc78, 0x7b000001}, {0xc78, 0x7b010001},
+	{0xc78, 0x7b020001}, {0xc78, 0x7b030001},
+	{0xc78, 0x7b040001}, {0xc78, 0x7b050001},
+	{0xc78, 0x7a060001}, {0xc78, 0x79070001},
+	{0xc78, 0x78080001}, {0xc78, 0x77090001},
+	{0xc78, 0x760a0001}, {0xc78, 0x750b0001},
+	{0xc78, 0x740c0001}, {0xc78, 0x730d0001},
+	{0xc78, 0x720e0001}, {0xc78, 0x710f0001},
+	{0xc78, 0x70100001}, {0xc78, 0x6f110001},
+	{0xc78, 0x6e120001}, {0xc78, 0x6d130001},
+	{0xc78, 0x6c140001}, {0xc78, 0x6b150001},
+	{0xc78, 0x6a160001}, {0xc78, 0x69170001},
+	{0xc78, 0x68180001}, {0xc78, 0x67190001},
+	{0xc78, 0x661a0001}, {0xc78, 0x651b0001},
+	{0xc78, 0x641c0001}, {0xc78, 0x631d0001},
+	{0xc78, 0x621e0001}, {0xc78, 0x611f0001},
+	{0xc78, 0x60200001}, {0xc78, 0x49210001},
+	{0xc78, 0x48220001}, {0xc78, 0x47230001},
+	{0xc78, 0x46240001}, {0xc78, 0x45250001},
+	{0xc78, 0x44260001}, {0xc78, 0x43270001},
+	{0xc78, 0x42280001}, {0xc78, 0x41290001},
+	{0xc78, 0x402a0001}, {0xc78, 0x262b0001},
+	{0xc78, 0x252c0001}, {0xc78, 0x242d0001},
+	{0xc78, 0x232e0001}, {0xc78, 0x222f0001},
+	{0xc78, 0x21300001}, {0xc78, 0x20310001},
+	{0xc78, 0x06320001}, {0xc78, 0x05330001},
+	{0xc78, 0x04340001}, {0xc78, 0x03350001},
+	{0xc78, 0x02360001}, {0xc78, 0x01370001},
+	{0xc78, 0x00380001}, {0xc78, 0x00390001},
+	{0xc78, 0x003a0001}, {0xc78, 0x003b0001},
+	{0xc78, 0x003c0001}, {0xc78, 0x003d0001},
+	{0xc78, 0x003e0001}, {0xc78, 0x003f0001},
+	{0xc78, 0x7b400001}, {0xc78, 0x7b410001},
+	{0xc78, 0x7b420001}, {0xc78, 0x7b430001},
+	{0xc78, 0x7b440001}, {0xc78, 0x7b450001},
+	{0xc78, 0x7a460001}, {0xc78, 0x79470001},
+	{0xc78, 0x78480001}, {0xc78, 0x77490001},
+	{0xc78, 0x764a0001}, {0xc78, 0x754b0001},
+	{0xc78, 0x744c0001}, {0xc78, 0x734d0001},
+	{0xc78, 0x724e0001}, {0xc78, 0x714f0001},
+	{0xc78, 0x70500001}, {0xc78, 0x6f510001},
+	{0xc78, 0x6e520001}, {0xc78, 0x6d530001},
+	{0xc78, 0x6c540001}, {0xc78, 0x6b550001},
+	{0xc78, 0x6a560001}, {0xc78, 0x69570001},
+	{0xc78, 0x68580001}, {0xc78, 0x67590001},
+	{0xc78, 0x665a0001}, {0xc78, 0x655b0001},
+	{0xc78, 0x645c0001}, {0xc78, 0x635d0001},
+	{0xc78, 0x625e0001}, {0xc78, 0x615f0001},
+	{0xc78, 0x60600001}, {0xc78, 0x49610001},
+	{0xc78, 0x48620001}, {0xc78, 0x47630001},
+	{0xc78, 0x46640001}, {0xc78, 0x45650001},
+	{0xc78, 0x44660001}, {0xc78, 0x43670001},
+	{0xc78, 0x42680001}, {0xc78, 0x41690001},
+	{0xc78, 0x406a0001}, {0xc78, 0x266b0001},
+	{0xc78, 0x256c0001}, {0xc78, 0x246d0001},
+	{0xc78, 0x236e0001}, {0xc78, 0x226f0001},
+	{0xc78, 0x21700001}, {0xc78, 0x20710001},
+	{0xc78, 0x06720001}, {0xc78, 0x05730001},
+	{0xc78, 0x04740001}, {0xc78, 0x03750001},
+	{0xc78, 0x02760001}, {0xc78, 0x01770001},
+	{0xc78, 0x00780001}, {0xc78, 0x00790001},
+	{0xc78, 0x007a0001}, {0xc78, 0x007b0001},
+	{0xc78, 0x007c0001}, {0xc78, 0x007d0001},
+	{0xc78, 0x007e0001}, {0xc78, 0x007f0001},
+	{0xc78, 0x3800001e}, {0xc78, 0x3801001e},
+	{0xc78, 0x3802001e}, {0xc78, 0x3803001e},
+	{0xc78, 0x3804001e}, {0xc78, 0x3805001e},
+	{0xc78, 0x3806001e}, {0xc78, 0x3807001e},
+	{0xc78, 0x3808001e}, {0xc78, 0x3c09001e},
+	{0xc78, 0x3e0a001e}, {0xc78, 0x400b001e},
+	{0xc78, 0x440c001e}, {0xc78, 0x480d001e},
+	{0xc78, 0x4c0e001e}, {0xc78, 0x500f001e},
+	{0xc78, 0x5210001e}, {0xc78, 0x5611001e},
+	{0xc78, 0x5a12001e}, {0xc78, 0x5e13001e},
+	{0xc78, 0x6014001e}, {0xc78, 0x6015001e},
+	{0xc78, 0x6016001e}, {0xc78, 0x6217001e},
+	{0xc78, 0x6218001e}, {0xc78, 0x6219001e},
+	{0xc78, 0x621a001e}, {0xc78, 0x621b001e},
+	{0xc78, 0x621c001e}, {0xc78, 0x621d001e},
+	{0xc78, 0x621e001e}, {0xc78, 0x621f001e},
+	{0xffff, 0xffffffff}
+};
+
+static const struct rtl8xxxu_reg32val rtl8xxx_agc_highpa_table[] = {
+	{0xc78, 0x7b000001}, {0xc78, 0x7b010001},
+	{0xc78, 0x7b020001}, {0xc78, 0x7b030001},
+	{0xc78, 0x7b040001}, {0xc78, 0x7b050001},
+	{0xc78, 0x7b060001}, {0xc78, 0x7b070001},
+	{0xc78, 0x7b080001}, {0xc78, 0x7a090001},
+	{0xc78, 0x790a0001}, {0xc78, 0x780b0001},
+	{0xc78, 0x770c0001}, {0xc78, 0x760d0001},
+	{0xc78, 0x750e0001}, {0xc78, 0x740f0001},
+	{0xc78, 0x73100001}, {0xc78, 0x72110001},
+	{0xc78, 0x71120001}, {0xc78, 0x70130001},
+	{0xc78, 0x6f140001}, {0xc78, 0x6e150001},
+	{0xc78, 0x6d160001}, {0xc78, 0x6c170001},
+	{0xc78, 0x6b180001}, {0xc78, 0x6a190001},
+	{0xc78, 0x691a0001}, {0xc78, 0x681b0001},
+	{0xc78, 0x671c0001}, {0xc78, 0x661d0001},
+	{0xc78, 0x651e0001}, {0xc78, 0x641f0001},
+	{0xc78, 0x63200001}, {0xc78, 0x62210001},
+	{0xc78, 0x61220001}, {0xc78, 0x60230001},
+	{0xc78, 0x46240001}, {0xc78, 0x45250001},
+	{0xc78, 0x44260001}, {0xc78, 0x43270001},
+	{0xc78, 0x42280001}, {0xc78, 0x41290001},
+	{0xc78, 0x402a0001}, {0xc78, 0x262b0001},
+	{0xc78, 0x252c0001}, {0xc78, 0x242d0001},
+	{0xc78, 0x232e0001}, {0xc78, 0x222f0001},
+	{0xc78, 0x21300001}, {0xc78, 0x20310001},
+	{0xc78, 0x06320001}, {0xc78, 0x05330001},
+	{0xc78, 0x04340001}, {0xc78, 0x03350001},
+	{0xc78, 0x02360001}, {0xc78, 0x01370001},
+	{0xc78, 0x00380001}, {0xc78, 0x00390001},
+	{0xc78, 0x003a0001}, {0xc78, 0x003b0001},
+	{0xc78, 0x003c0001}, {0xc78, 0x003d0001},
+	{0xc78, 0x003e0001}, {0xc78, 0x003f0001},
+	{0xc78, 0x7b400001}, {0xc78, 0x7b410001},
+	{0xc78, 0x7b420001}, {0xc78, 0x7b430001},
+	{0xc78, 0x7b440001}, {0xc78, 0x7b450001},
+	{0xc78, 0x7b460001}, {0xc78, 0x7b470001},
+	{0xc78, 0x7b480001}, {0xc78, 0x7a490001},
+	{0xc78, 0x794a0001}, {0xc78, 0x784b0001},
+	{0xc78, 0x774c0001}, {0xc78, 0x764d0001},
+	{0xc78, 0x754e0001}, {0xc78, 0x744f0001},
+	{0xc78, 0x73500001}, {0xc78, 0x72510001},
+	{0xc78, 0x71520001}, {0xc78, 0x70530001},
+	{0xc78, 0x6f540001}, {0xc78, 0x6e550001},
+	{0xc78, 0x6d560001}, {0xc78, 0x6c570001},
+	{0xc78, 0x6b580001}, {0xc78, 0x6a590001},
+	{0xc78, 0x695a0001}, {0xc78, 0x685b0001},
+	{0xc78, 0x675c0001}, {0xc78, 0x665d0001},
+	{0xc78, 0x655e0001}, {0xc78, 0x645f0001},
+	{0xc78, 0x63600001}, {0xc78, 0x62610001},
+	{0xc78, 0x61620001}, {0xc78, 0x60630001},
+	{0xc78, 0x46640001}, {0xc78, 0x45650001},
+	{0xc78, 0x44660001}, {0xc78, 0x43670001},
+	{0xc78, 0x42680001}, {0xc78, 0x41690001},
+	{0xc78, 0x406a0001}, {0xc78, 0x266b0001},
+	{0xc78, 0x256c0001}, {0xc78, 0x246d0001},
+	{0xc78, 0x236e0001}, {0xc78, 0x226f0001},
+	{0xc78, 0x21700001}, {0xc78, 0x20710001},
+	{0xc78, 0x06720001}, {0xc78, 0x05730001},
+	{0xc78, 0x04740001}, {0xc78, 0x03750001},
+	{0xc78, 0x02760001}, {0xc78, 0x01770001},
+	{0xc78, 0x00780001}, {0xc78, 0x00790001},
+	{0xc78, 0x007a0001}, {0xc78, 0x007b0001},
+	{0xc78, 0x007c0001}, {0xc78, 0x007d0001},
+	{0xc78, 0x007e0001}, {0xc78, 0x007f0001},
+	{0xc78, 0x3800001e}, {0xc78, 0x3801001e},
+	{0xc78, 0x3802001e}, {0xc78, 0x3803001e},
+	{0xc78, 0x3804001e}, {0xc78, 0x3805001e},
+	{0xc78, 0x3806001e}, {0xc78, 0x3807001e},
+	{0xc78, 0x3808001e}, {0xc78, 0x3c09001e},
+	{0xc78, 0x3e0a001e}, {0xc78, 0x400b001e},
+	{0xc78, 0x440c001e}, {0xc78, 0x480d001e},
+	{0xc78, 0x4c0e001e}, {0xc78, 0x500f001e},
+	{0xc78, 0x5210001e}, {0xc78, 0x5611001e},
+	{0xc78, 0x5a12001e}, {0xc78, 0x5e13001e},
+	{0xc78, 0x6014001e}, {0xc78, 0x6015001e},
+	{0xc78, 0x6016001e}, {0xc78, 0x6217001e},
+	{0xc78, 0x6218001e}, {0xc78, 0x6219001e},
+	{0xc78, 0x621a001e}, {0xc78, 0x621b001e},
+	{0xc78, 0x621c001e}, {0xc78, 0x621d001e},
+	{0xc78, 0x621e001e}, {0xc78, 0x621f001e},
+	{0xffff, 0xffffffff}
+};
+
+static const struct rtl8xxxu_rfregs rtl8xxxu_rfregs[] = {
+	{	/* RF_A */
+		.hssiparm1 = REG_FPGA0_XA_HSSI_PARM1,
+		.hssiparm2 = REG_FPGA0_XA_HSSI_PARM2,
+		.lssiparm = REG_FPGA0_XA_LSSI_PARM,
+		.hspiread = REG_HSPI_XA_READBACK,
+		.lssiread = REG_FPGA0_XA_LSSI_READBACK,
+		.rf_sw_ctrl = REG_FPGA0_XA_RF_SW_CTRL,
+	},
+	{	/* RF_B */
+		.hssiparm1 = REG_FPGA0_XB_HSSI_PARM1,
+		.hssiparm2 = REG_FPGA0_XB_HSSI_PARM2,
+		.lssiparm = REG_FPGA0_XB_LSSI_PARM,
+		.hspiread = REG_HSPI_XB_READBACK,
+		.lssiread = REG_FPGA0_XB_LSSI_READBACK,
+		.rf_sw_ctrl = REG_FPGA0_XB_RF_SW_CTRL,
+	},
+};
+
+const u32 rtl8xxxu_iqk_phy_iq_bb_reg[RTL8XXXU_BB_REGS] = {
+	REG_OFDM0_XA_RX_IQ_IMBALANCE,
+	REG_OFDM0_XB_RX_IQ_IMBALANCE,
+	REG_OFDM0_ENERGY_CCA_THRES,
+	REG_OFDM0_AGC_RSSI_TABLE,
+	REG_OFDM0_XA_TX_IQ_IMBALANCE,
+	REG_OFDM0_XB_TX_IQ_IMBALANCE,
+	REG_OFDM0_XC_TX_AFE,
+	REG_OFDM0_XD_TX_AFE,
+	REG_OFDM0_RX_IQ_EXT_ANTA
+};
+
+u8 rtl8xxxu_read8(struct rtl8xxxu_priv *priv, u16 addr)
+{
+	struct usb_device *udev = priv->udev;
+	int len;
+	u8 data;
+
+	if (priv->rtl_chip == RTL8710B && addr <= 0xff)
+		addr |= 0x8000;
+
+	mutex_lock(&priv->usb_buf_mutex);
+	len = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
+			      REALTEK_USB_CMD_REQ, REALTEK_USB_READ,
+			      addr, 0, &priv->usb_buf.val8, sizeof(u8),
+			      RTW_USB_CONTROL_MSG_TIMEOUT);
+	data = priv->usb_buf.val8;
+	mutex_unlock(&priv->usb_buf_mutex);
+
+	if (rtl8xxxu_debug & RTL8XXXU_DEBUG_REG_READ)
+		dev_info(&udev->dev, "%s(%04x)   = 0x%02x, len %i\n",
+			 __func__, addr, data, len);
+	return data;
+}
+
+u16 rtl8xxxu_read16(struct rtl8xxxu_priv *priv, u16 addr)
+{
+	struct usb_device *udev = priv->udev;
+	int len;
+	u16 data;
+
+	if (priv->rtl_chip == RTL8710B && addr <= 0xff)
+		addr |= 0x8000;
+
+	mutex_lock(&priv->usb_buf_mutex);
+	len = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
+			      REALTEK_USB_CMD_REQ, REALTEK_USB_READ,
+			      addr, 0, &priv->usb_buf.val16, sizeof(u16),
+			      RTW_USB_CONTROL_MSG_TIMEOUT);
+	data = le16_to_cpu(priv->usb_buf.val16);
+	mutex_unlock(&priv->usb_buf_mutex);
+
+	if (rtl8xxxu_debug & RTL8XXXU_DEBUG_REG_READ)
+		dev_info(&udev->dev, "%s(%04x)  = 0x%04x, len %i\n",
+			 __func__, addr, data, len);
+	return data;
+}
+
+u32 rtl8xxxu_read32(struct rtl8xxxu_priv *priv, u16 addr)
+{
+	struct usb_device *udev = priv->udev;
+	int len;
+	u32 data;
+
+	if (priv->rtl_chip == RTL8710B && addr <= 0xff)
+		addr |= 0x8000;
+
+	mutex_lock(&priv->usb_buf_mutex);
+	len = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
+			      REALTEK_USB_CMD_REQ, REALTEK_USB_READ,
+			      addr, 0, &priv->usb_buf.val32, sizeof(u32),
+			      RTW_USB_CONTROL_MSG_TIMEOUT);
+	data = le32_to_cpu(priv->usb_buf.val32);
+	mutex_unlock(&priv->usb_buf_mutex);
+
+	if (rtl8xxxu_debug & RTL8XXXU_DEBUG_REG_READ)
+		dev_info(&udev->dev, "%s(%04x)  = 0x%08x, len %i\n",
+			 __func__, addr, data, len);
+	return data;
+}
+
+int rtl8xxxu_write8(struct rtl8xxxu_priv *priv, u16 addr, u8 val)
+{
+	struct usb_device *udev = priv->udev;
+	int ret;
+
+	if (priv->rtl_chip == RTL8710B && addr <= 0xff)
+		addr |= 0x8000;
+
+	mutex_lock(&priv->usb_buf_mutex);
+	priv->usb_buf.val8 = val;
+	ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+			      REALTEK_USB_CMD_REQ, REALTEK_USB_WRITE,
+			      addr, 0, &priv->usb_buf.val8, sizeof(u8),
+			      RTW_USB_CONTROL_MSG_TIMEOUT);
+
+	mutex_unlock(&priv->usb_buf_mutex);
+
+	if (rtl8xxxu_debug & RTL8XXXU_DEBUG_REG_WRITE)
+		dev_info(&udev->dev, "%s(%04x) = 0x%02x\n",
+			 __func__, addr, val);
+	return ret;
+}
+
+int rtl8xxxu_write16(struct rtl8xxxu_priv *priv, u16 addr, u16 val)
+{
+	struct usb_device *udev = priv->udev;
+	int ret;
+
+	if (priv->rtl_chip == RTL8710B && addr <= 0xff)
+		addr |= 0x8000;
+
+	mutex_lock(&priv->usb_buf_mutex);
+	priv->usb_buf.val16 = cpu_to_le16(val);
+	ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+			      REALTEK_USB_CMD_REQ, REALTEK_USB_WRITE,
+			      addr, 0, &priv->usb_buf.val16, sizeof(u16),
+			      RTW_USB_CONTROL_MSG_TIMEOUT);
+	mutex_unlock(&priv->usb_buf_mutex);
+
+	if (rtl8xxxu_debug & RTL8XXXU_DEBUG_REG_WRITE)
+		dev_info(&udev->dev, "%s(%04x) = 0x%04x\n",
+			 __func__, addr, val);
+	return ret;
+}
+
+int rtl8xxxu_write32(struct rtl8xxxu_priv *priv, u16 addr, u32 val)
+{
+	struct usb_device *udev = priv->udev;
+	int ret;
+
+	if (priv->rtl_chip == RTL8710B && addr <= 0xff)
+		addr |= 0x8000;
+
+	mutex_lock(&priv->usb_buf_mutex);
+	priv->usb_buf.val32 = cpu_to_le32(val);
+	ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+			      REALTEK_USB_CMD_REQ, REALTEK_USB_WRITE,
+			      addr, 0, &priv->usb_buf.val32, sizeof(u32),
+			      RTW_USB_CONTROL_MSG_TIMEOUT);
+	mutex_unlock(&priv->usb_buf_mutex);
+
+	if (rtl8xxxu_debug & RTL8XXXU_DEBUG_REG_WRITE)
+		dev_info(&udev->dev, "%s(%04x) = 0x%08x\n",
+			 __func__, addr, val);
+	return ret;
+}
+
+int rtl8xxxu_write8_set(struct rtl8xxxu_priv *priv, u16 addr, u8 bits)
+{
+	u8 val8;
+
+	val8 = rtl8xxxu_read8(priv, addr);
+	val8 |= bits;
+	return rtl8xxxu_write8(priv, addr, val8);
+}
+
+int rtl8xxxu_write8_clear(struct rtl8xxxu_priv *priv, u16 addr, u8 bits)
+{
+	u8 val8;
+
+	val8 = rtl8xxxu_read8(priv, addr);
+	val8 &= ~bits;
+	return rtl8xxxu_write8(priv, addr, val8);
+}
+
+int rtl8xxxu_write16_set(struct rtl8xxxu_priv *priv, u16 addr, u16 bits)
+{
+	u16 val16;
+
+	val16 = rtl8xxxu_read16(priv, addr);
+	val16 |= bits;
+	return rtl8xxxu_write16(priv, addr, val16);
+}
+
+int rtl8xxxu_write16_clear(struct rtl8xxxu_priv *priv, u16 addr, u16 bits)
+{
+	u16 val16;
+
+	val16 = rtl8xxxu_read16(priv, addr);
+	val16 &= ~bits;
+	return rtl8xxxu_write16(priv, addr, val16);
+}
+
+int rtl8xxxu_write32_set(struct rtl8xxxu_priv *priv, u16 addr, u32 bits)
+{
+	u32 val32;
+
+	val32 = rtl8xxxu_read32(priv, addr);
+	val32 |= bits;
+	return rtl8xxxu_write32(priv, addr, val32);
+}
+
+int rtl8xxxu_write32_clear(struct rtl8xxxu_priv *priv, u16 addr, u32 bits)
+{
+	u32 val32;
+
+	val32 = rtl8xxxu_read32(priv, addr);
+	val32 &= ~bits;
+	return rtl8xxxu_write32(priv, addr, val32);
+}
+
+int rtl8xxxu_write32_mask(struct rtl8xxxu_priv *priv, u16 addr,
+			  u32 mask, u32 val)
+{
+	u32 orig, new, shift;
+
+	shift = __ffs(mask);
+
+	orig = rtl8xxxu_read32(priv, addr);
+	new = (orig & ~mask) | ((val << shift) & mask);
+	return rtl8xxxu_write32(priv, addr, new);
+}
+
+int rtl8xxxu_write_rfreg_mask(struct rtl8xxxu_priv *priv,
+			      enum rtl8xxxu_rfpath path, u8 reg,
+			      u32 mask, u32 val)
+{
+	u32 orig, new, shift;
+
+	shift = __ffs(mask);
+
+	orig = rtl8xxxu_read_rfreg(priv, path, reg);
+	new = (orig & ~mask) | ((val << shift) & mask);
+	return rtl8xxxu_write_rfreg(priv, path, reg, new);
+}
+
+static int
+rtl8xxxu_writeN(struct rtl8xxxu_priv *priv, u16 addr, u8 *buf, u16 len)
+{
+	struct usb_device *udev = priv->udev;
+	int blocksize = priv->fops->writeN_block_size;
+	int ret, i, count, remainder;
+
+	count = len / blocksize;
+	remainder = len % blocksize;
+
+	for (i = 0; i < count; i++) {
+		ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+				      REALTEK_USB_CMD_REQ, REALTEK_USB_WRITE,
+				      addr, 0, buf, blocksize,
+				      RTW_USB_CONTROL_MSG_TIMEOUT);
+		if (ret != blocksize)
+			goto write_error;
+
+		addr += blocksize;
+		buf += blocksize;
+	}
+
+	if (remainder) {
+		ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+				      REALTEK_USB_CMD_REQ, REALTEK_USB_WRITE,
+				      addr, 0, buf, remainder,
+				      RTW_USB_CONTROL_MSG_TIMEOUT);
+		if (ret != remainder)
+			goto write_error;
+	}
+
+	return len;
+
+write_error:
+	dev_info(&udev->dev,
+		 "%s: Failed to write block at addr: %04x size: %04x\n",
+		 __func__, addr, blocksize);
+	return -EAGAIN;
+}
+
+u32 rtl8xxxu_read_rfreg(struct rtl8xxxu_priv *priv,
+			enum rtl8xxxu_rfpath path, u8 reg)
+{
+	u32 hssia, val32, retval;
+
+	hssia = rtl8xxxu_read32(priv, REG_FPGA0_XA_HSSI_PARM2);
+	if (path != RF_A)
+		val32 = rtl8xxxu_read32(priv, rtl8xxxu_rfregs[path].hssiparm2);
+	else
+		val32 = hssia;
+
+	val32 &= ~FPGA0_HSSI_PARM2_ADDR_MASK;
+	val32 |= (reg << FPGA0_HSSI_PARM2_ADDR_SHIFT);
+	val32 |= FPGA0_HSSI_PARM2_EDGE_READ;
+	hssia &= ~FPGA0_HSSI_PARM2_EDGE_READ;
+	rtl8xxxu_write32(priv, REG_FPGA0_XA_HSSI_PARM2, hssia);
+
+	udelay(10);
+
+	rtl8xxxu_write32(priv, rtl8xxxu_rfregs[path].hssiparm2, val32);
+	udelay(100);
+
+	hssia |= FPGA0_HSSI_PARM2_EDGE_READ;
+	rtl8xxxu_write32(priv, REG_FPGA0_XA_HSSI_PARM2, hssia);
+	udelay(10);
+
+	val32 = rtl8xxxu_read32(priv, rtl8xxxu_rfregs[path].hssiparm1);
+	if (val32 & FPGA0_HSSI_PARM1_PI)
+		retval = rtl8xxxu_read32(priv, rtl8xxxu_rfregs[path].hspiread);
+	else
+		retval = rtl8xxxu_read32(priv, rtl8xxxu_rfregs[path].lssiread);
+
+	retval &= 0xfffff;
+
+	if (rtl8xxxu_debug & RTL8XXXU_DEBUG_RFREG_READ)
+		dev_info(&priv->udev->dev, "%s(%02x) = 0x%06x\n",
+			 __func__, reg, retval);
+	return retval;
+}
+
+/*
+ * The RTL8723BU driver indicates that registers 0xb2 and 0xb6 can
+ * have write issues in high temperature conditions. We may have to
+ * retry writing them.
+ */
+int rtl8xxxu_write_rfreg(struct rtl8xxxu_priv *priv,
+			 enum rtl8xxxu_rfpath path, u8 reg, u32 data)
+{
+	int ret, retval;
+	u32 dataaddr, val32;
+
+	if (rtl8xxxu_debug & RTL8XXXU_DEBUG_RFREG_WRITE)
+		dev_info(&priv->udev->dev, "%s(%02x) = 0x%06x\n",
+			 __func__, reg, data);
+
+	data &= FPGA0_LSSI_PARM_DATA_MASK;
+	dataaddr = (reg << FPGA0_LSSI_PARM_ADDR_SHIFT) | data;
+
+	if (priv->rtl_chip == RTL8192E) {
+		val32 = rtl8xxxu_read32(priv, REG_FPGA0_POWER_SAVE);
+		val32 &= ~0x20000;
+		rtl8xxxu_write32(priv, REG_FPGA0_POWER_SAVE, val32);
+	}
+
+	/* Use XB for path B */
+	ret = rtl8xxxu_write32(priv, rtl8xxxu_rfregs[path].lssiparm, dataaddr);
+	if (ret != sizeof(dataaddr))
+		retval = -EIO;
+	else
+		retval = 0;
+
+	udelay(1);
+
+	if (priv->rtl_chip == RTL8192E) {
+		val32 = rtl8xxxu_read32(priv, REG_FPGA0_POWER_SAVE);
+		val32 |= 0x20000;
+		rtl8xxxu_write32(priv, REG_FPGA0_POWER_SAVE, val32);
+	}
+
+	return retval;
+}
+
+static int
+rtl8xxxu_gen1_h2c_cmd(struct rtl8xxxu_priv *priv, struct h2c_cmd *h2c, int len)
+{
+	struct device *dev = &priv->udev->dev;
+	int mbox_nr, retry, retval = 0;
+	int mbox_reg, mbox_ext_reg;
+	u8 val8;
+
+	mutex_lock(&priv->h2c_mutex);
+
+	mbox_nr = priv->next_mbox;
+	mbox_reg = REG_HMBOX_0 + (mbox_nr * 4);
+	mbox_ext_reg = REG_HMBOX_EXT_0 + (mbox_nr * 2);
+
+	/*
+	 * MBOX ready?
+	 */
+	retry = 100;
+	do {
+		val8 = rtl8xxxu_read8(priv, REG_HMTFR);
+		if (!(val8 & BIT(mbox_nr)))
+			break;
+	} while (retry--);
+
+	if (!retry) {
+		dev_info(dev, "%s: Mailbox busy\n", __func__);
+		retval = -EBUSY;
+		goto error;
+	}
+
+	/*
+	 * Need to swap as it's being swapped again by rtl8xxxu_write16/32()
+	 */
+	if (len > sizeof(u32)) {
+		rtl8xxxu_write16(priv, mbox_ext_reg, le16_to_cpu(h2c->raw.ext));
+		if (rtl8xxxu_debug & RTL8XXXU_DEBUG_H2C)
+			dev_info(dev, "H2C_EXT %04x\n",
+				 le16_to_cpu(h2c->raw.ext));
+	}
+	rtl8xxxu_write32(priv, mbox_reg, le32_to_cpu(h2c->raw.data));
+	if (rtl8xxxu_debug & RTL8XXXU_DEBUG_H2C)
+		dev_info(dev, "H2C %08x\n", le32_to_cpu(h2c->raw.data));
+
+	priv->next_mbox = (mbox_nr + 1) % H2C_MAX_MBOX;
+
+error:
+	mutex_unlock(&priv->h2c_mutex);
+	return retval;
+}
+
+int
+rtl8xxxu_gen2_h2c_cmd(struct rtl8xxxu_priv *priv, struct h2c_cmd *h2c, int len)
+{
+	struct device *dev = &priv->udev->dev;
+	int mbox_nr, retry, retval = 0;
+	int mbox_reg, mbox_ext_reg;
+	u8 val8;
+
+	mutex_lock(&priv->h2c_mutex);
+
+	mbox_nr = priv->next_mbox;
+	mbox_reg = REG_HMBOX_0 + (mbox_nr * 4);
+	mbox_ext_reg = REG_HMBOX_EXT0_8723B + (mbox_nr * 4);
+
+	/*
+	 * MBOX ready?
+	 */
+	retry = 100;
+	do {
+		val8 = rtl8xxxu_read8(priv, REG_HMTFR);
+		if (!(val8 & BIT(mbox_nr)))
+			break;
+	} while (retry--);
+
+	if (!retry) {
+		dev_info(dev, "%s: Mailbox busy\n", __func__);
+		retval = -EBUSY;
+		goto error;
+	}
+
+	/*
+	 * Need to swap as it's being swapped again by rtl8xxxu_write16/32()
+	 */
+	if (len > sizeof(u32)) {
+		rtl8xxxu_write32(priv, mbox_ext_reg,
+				 le32_to_cpu(h2c->raw_wide.ext));
+		if (rtl8xxxu_debug & RTL8XXXU_DEBUG_H2C)
+			dev_info(dev, "H2C_EXT %08x\n",
+				 le32_to_cpu(h2c->raw_wide.ext));
+	}
+	rtl8xxxu_write32(priv, mbox_reg, le32_to_cpu(h2c->raw.data));
+	if (rtl8xxxu_debug & RTL8XXXU_DEBUG_H2C)
+		dev_info(dev, "H2C %08x\n", le32_to_cpu(h2c->raw.data));
+
+	priv->next_mbox = (mbox_nr + 1) % H2C_MAX_MBOX;
+
+error:
+	mutex_unlock(&priv->h2c_mutex);
+	return retval;
+}
+
+void rtl8xxxu_gen1_enable_rf(struct rtl8xxxu_priv *priv)
+{
+	u8 val8;
+	u32 val32;
+
+	val8 = rtl8xxxu_read8(priv, REG_SPS0_CTRL);
+	val8 |= BIT(0) | BIT(3);
+	rtl8xxxu_write8(priv, REG_SPS0_CTRL, val8);
+
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_XAB_RF_PARM);
+	val32 &= ~(BIT(4) | BIT(5));
+	val32 |= BIT(3);
+	if (priv->rf_paths == 2) {
+		val32 &= ~(BIT(20) | BIT(21));
+		val32 |= BIT(19);
+	}
+	rtl8xxxu_write32(priv, REG_FPGA0_XAB_RF_PARM, val32);
+
+	val32 = rtl8xxxu_read32(priv, REG_OFDM0_TRX_PATH_ENABLE);
+	val32 &= ~OFDM_RF_PATH_TX_MASK;
+	if (priv->tx_paths == 2)
+		val32 |= OFDM_RF_PATH_TX_A | OFDM_RF_PATH_TX_B;
+	else if (priv->rtl_chip == RTL8192C || priv->rtl_chip == RTL8191C)
+		val32 |= OFDM_RF_PATH_TX_B;
+	else
+		val32 |= OFDM_RF_PATH_TX_A;
+	rtl8xxxu_write32(priv, REG_OFDM0_TRX_PATH_ENABLE, val32);
+
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE);
+	val32 &= ~FPGA_RF_MODE_JAPAN;
+	rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32);
+
+	if (priv->rf_paths == 2)
+		rtl8xxxu_write32(priv, REG_RX_WAIT_CCA, 0x63db25a0);
+	else
+		rtl8xxxu_write32(priv, REG_RX_WAIT_CCA, 0x631b25a0);
+
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_AC, 0x32d95);
+	if (priv->rf_paths == 2)
+		rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_AC, 0x32d95);
+
+	rtl8xxxu_write8(priv, REG_TXPAUSE, 0x00);
+}
+
+void rtl8xxxu_gen1_disable_rf(struct rtl8xxxu_priv *priv)
+{
+	u8 sps0;
+	u32 val32;
+
+	sps0 = rtl8xxxu_read8(priv, REG_SPS0_CTRL);
+
+	/* RF RX code for preamble power saving */
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_XAB_RF_PARM);
+	val32 &= ~(BIT(3) | BIT(4) | BIT(5));
+	if (priv->rf_paths == 2)
+		val32 &= ~(BIT(19) | BIT(20) | BIT(21));
+	rtl8xxxu_write32(priv, REG_FPGA0_XAB_RF_PARM, val32);
+
+	/* Disable TX for four paths */
+	val32 = rtl8xxxu_read32(priv, REG_OFDM0_TRX_PATH_ENABLE);
+	val32 &= ~OFDM_RF_PATH_TX_MASK;
+	rtl8xxxu_write32(priv, REG_OFDM0_TRX_PATH_ENABLE, val32);
+
+	/* Enable power saving */
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE);
+	val32 |= FPGA_RF_MODE_JAPAN;
+	rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32);
+
+	/* AFE control register to power down bits [30:22] */
+	if (priv->rf_paths == 2)
+		rtl8xxxu_write32(priv, REG_RX_WAIT_CCA, 0x00db25a0);
+	else
+		rtl8xxxu_write32(priv, REG_RX_WAIT_CCA, 0x001b25a0);
+
+	/* Power down RF module */
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_AC, 0);
+	if (priv->rf_paths == 2)
+		rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_AC, 0);
+
+	sps0 &= ~(BIT(0) | BIT(3));
+	rtl8xxxu_write8(priv, REG_SPS0_CTRL, sps0);
+}
+
+static void rtl8xxxu_stop_tx_beacon(struct rtl8xxxu_priv *priv)
+{
+	u8 val8;
+
+	val8 = rtl8xxxu_read8(priv, REG_FWHW_TXQ_CTRL + 2);
+	val8 &= ~BIT(6);
+	rtl8xxxu_write8(priv, REG_FWHW_TXQ_CTRL + 2, val8);
+
+	rtl8xxxu_write8(priv, REG_TBTT_PROHIBIT + 1, 0x64);
+	val8 = rtl8xxxu_read8(priv, REG_TBTT_PROHIBIT + 2);
+	val8 &= ~BIT(0);
+	rtl8xxxu_write8(priv, REG_TBTT_PROHIBIT + 2, val8);
+}
+
+static void rtl8xxxu_start_tx_beacon(struct rtl8xxxu_priv *priv)
+{
+	u8 val8;
+
+	val8 = rtl8xxxu_read8(priv, REG_FWHW_TXQ_CTRL + 2);
+	val8 |= EN_BCNQ_DL >> 16;
+	rtl8xxxu_write8(priv, REG_FWHW_TXQ_CTRL + 2, val8);
+
+	rtl8xxxu_write8(priv, REG_TBTT_PROHIBIT + 1, 0x80);
+	val8 = rtl8xxxu_read8(priv, REG_TBTT_PROHIBIT + 2);
+	val8 &= 0xF0;
+	rtl8xxxu_write8(priv, REG_TBTT_PROHIBIT + 2, val8);
+}
+
+
+/*
+ * The rtl8723a has 3 channel groups for it's efuse settings. It only
+ * supports the 2.4GHz band, so channels 1 - 14:
+ *  group 0: channels 1 - 3
+ *  group 1: channels 4 - 9
+ *  group 2: channels 10 - 14
+ *
+ * Note: We index from 0 in the code
+ */
+static int rtl8xxxu_gen1_channel_to_group(int channel)
+{
+	int group;
+
+	if (channel < 4)
+		group = 0;
+	else if (channel < 10)
+		group = 1;
+	else
+		group = 2;
+
+	return group;
+}
+
+/*
+ * Valid for rtl8723bu and rtl8192eu
+ */
+int rtl8xxxu_gen2_channel_to_group(int channel)
+{
+	int group;
+
+	if (channel < 3)
+		group = 0;
+	else if (channel < 6)
+		group = 1;
+	else if (channel < 9)
+		group = 2;
+	else if (channel < 12)
+		group = 3;
+	else
+		group = 4;
+
+	return group;
+}
+
+void rtl8xxxu_gen1_config_channel(struct ieee80211_hw *hw)
+{
+	struct rtl8xxxu_priv *priv = hw->priv;
+	u32 val32, rsr;
+	u8 val8, opmode;
+	bool ht = true;
+	int sec_ch_above, channel;
+	int i;
+
+	opmode = rtl8xxxu_read8(priv, REG_BW_OPMODE);
+	rsr = rtl8xxxu_read32(priv, REG_RESPONSE_RATE_SET);
+	channel = hw->conf.chandef.chan->hw_value;
+
+	switch (hw->conf.chandef.width) {
+	case NL80211_CHAN_WIDTH_20_NOHT:
+		ht = false;
+		fallthrough;
+	case NL80211_CHAN_WIDTH_20:
+		opmode |= BW_OPMODE_20MHZ;
+		rtl8xxxu_write8(priv, REG_BW_OPMODE, opmode);
+
+		val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE);
+		val32 &= ~FPGA_RF_MODE;
+		rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32);
+
+		val32 = rtl8xxxu_read32(priv, REG_FPGA1_RF_MODE);
+		val32 &= ~FPGA_RF_MODE;
+		rtl8xxxu_write32(priv, REG_FPGA1_RF_MODE, val32);
+
+		val32 = rtl8xxxu_read32(priv, REG_FPGA0_ANALOG2);
+		val32 |= FPGA0_ANALOG2_20MHZ;
+		rtl8xxxu_write32(priv, REG_FPGA0_ANALOG2, val32);
+		break;
+	case NL80211_CHAN_WIDTH_40:
+		if (hw->conf.chandef.center_freq1 >
+		    hw->conf.chandef.chan->center_freq) {
+			sec_ch_above = 1;
+			channel += 2;
+		} else {
+			sec_ch_above = 0;
+			channel -= 2;
+		}
+
+		opmode &= ~BW_OPMODE_20MHZ;
+		rtl8xxxu_write8(priv, REG_BW_OPMODE, opmode);
+		rsr &= ~RSR_RSC_BANDWIDTH_40M;
+		if (sec_ch_above)
+			rsr |= RSR_RSC_UPPER_SUB_CHANNEL;
+		else
+			rsr |= RSR_RSC_LOWER_SUB_CHANNEL;
+		rtl8xxxu_write32(priv, REG_RESPONSE_RATE_SET, rsr);
+
+		val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE);
+		val32 |= FPGA_RF_MODE;
+		rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32);
+
+		val32 = rtl8xxxu_read32(priv, REG_FPGA1_RF_MODE);
+		val32 |= FPGA_RF_MODE;
+		rtl8xxxu_write32(priv, REG_FPGA1_RF_MODE, val32);
+
+		/*
+		 * Set Control channel to upper or lower. These settings
+		 * are required only for 40MHz
+		 */
+		val32 = rtl8xxxu_read32(priv, REG_CCK0_SYSTEM);
+		val32 &= ~CCK0_SIDEBAND;
+		if (!sec_ch_above)
+			val32 |= CCK0_SIDEBAND;
+		rtl8xxxu_write32(priv, REG_CCK0_SYSTEM, val32);
+
+		val32 = rtl8xxxu_read32(priv, REG_OFDM1_LSTF);
+		val32 &= ~OFDM_LSTF_PRIME_CH_MASK; /* 0xc00 */
+		if (sec_ch_above)
+			val32 |= OFDM_LSTF_PRIME_CH_LOW;
+		else
+			val32 |= OFDM_LSTF_PRIME_CH_HIGH;
+		rtl8xxxu_write32(priv, REG_OFDM1_LSTF, val32);
+
+		val32 = rtl8xxxu_read32(priv, REG_FPGA0_ANALOG2);
+		val32 &= ~FPGA0_ANALOG2_20MHZ;
+		rtl8xxxu_write32(priv, REG_FPGA0_ANALOG2, val32);
+
+		val32 = rtl8xxxu_read32(priv, REG_FPGA0_POWER_SAVE);
+		val32 &= ~(FPGA0_PS_LOWER_CHANNEL | FPGA0_PS_UPPER_CHANNEL);
+		if (sec_ch_above)
+			val32 |= FPGA0_PS_UPPER_CHANNEL;
+		else
+			val32 |= FPGA0_PS_LOWER_CHANNEL;
+		rtl8xxxu_write32(priv, REG_FPGA0_POWER_SAVE, val32);
+		break;
+
+	default:
+		break;
+	}
+
+	for (i = RF_A; i < priv->rf_paths; i++) {
+		val32 = rtl8xxxu_read_rfreg(priv, i, RF6052_REG_MODE_AG);
+		val32 &= ~MODE_AG_CHANNEL_MASK;
+		val32 |= channel;
+		rtl8xxxu_write_rfreg(priv, i, RF6052_REG_MODE_AG, val32);
+	}
+
+	if (ht)
+		val8 = 0x0e;
+	else
+		val8 = 0x0a;
+
+	rtl8xxxu_write8(priv, REG_SIFS_CCK + 1, val8);
+	rtl8xxxu_write8(priv, REG_SIFS_OFDM + 1, val8);
+
+	rtl8xxxu_write16(priv, REG_R2T_SIFS, 0x0808);
+	rtl8xxxu_write16(priv, REG_T2T_SIFS, 0x0a0a);
+
+	for (i = RF_A; i < priv->rf_paths; i++) {
+		val32 = rtl8xxxu_read_rfreg(priv, i, RF6052_REG_MODE_AG);
+		if (hw->conf.chandef.width == NL80211_CHAN_WIDTH_40)
+			val32 &= ~MODE_AG_CHANNEL_20MHZ;
+		else
+			val32 |= MODE_AG_CHANNEL_20MHZ;
+		rtl8xxxu_write_rfreg(priv, i, RF6052_REG_MODE_AG, val32);
+	}
+}
+
+void rtl8xxxu_gen2_config_channel(struct ieee80211_hw *hw)
+{
+	struct rtl8xxxu_priv *priv = hw->priv;
+	u32 val32;
+	u8 val8, subchannel;
+	u16 rf_mode_bw;
+	bool ht = true;
+	int sec_ch_above, channel;
+	int i;
+
+	rf_mode_bw = rtl8xxxu_read16(priv, REG_WMAC_TRXPTCL_CTL);
+	rf_mode_bw &= ~WMAC_TRXPTCL_CTL_BW_MASK;
+	channel = hw->conf.chandef.chan->hw_value;
+
+/* Hack */
+	subchannel = 0;
+
+	switch (hw->conf.chandef.width) {
+	case NL80211_CHAN_WIDTH_20_NOHT:
+		ht = false;
+		fallthrough;
+	case NL80211_CHAN_WIDTH_20:
+		rf_mode_bw |= WMAC_TRXPTCL_CTL_BW_20;
+		subchannel = 0;
+
+		val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE);
+		val32 &= ~FPGA_RF_MODE;
+		rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32);
+
+		val32 = rtl8xxxu_read32(priv, REG_FPGA1_RF_MODE);
+		val32 &= ~FPGA_RF_MODE;
+		rtl8xxxu_write32(priv, REG_FPGA1_RF_MODE, val32);
+
+		val32 = rtl8xxxu_read32(priv, REG_OFDM0_TX_PSDO_NOISE_WEIGHT);
+		val32 &= ~(BIT(30) | BIT(31));
+		rtl8xxxu_write32(priv, REG_OFDM0_TX_PSDO_NOISE_WEIGHT, val32);
+
+		break;
+	case NL80211_CHAN_WIDTH_40:
+		rf_mode_bw |= WMAC_TRXPTCL_CTL_BW_40;
+
+		if (hw->conf.chandef.center_freq1 >
+		    hw->conf.chandef.chan->center_freq) {
+			sec_ch_above = 1;
+			channel += 2;
+		} else {
+			sec_ch_above = 0;
+			channel -= 2;
+		}
+
+		val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE);
+		val32 |= FPGA_RF_MODE;
+		rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32);
+
+		val32 = rtl8xxxu_read32(priv, REG_FPGA1_RF_MODE);
+		val32 |= FPGA_RF_MODE;
+		rtl8xxxu_write32(priv, REG_FPGA1_RF_MODE, val32);
+
+		/*
+		 * Set Control channel to upper or lower. These settings
+		 * are required only for 40MHz
+		 */
+		val32 = rtl8xxxu_read32(priv, REG_CCK0_SYSTEM);
+		val32 &= ~CCK0_SIDEBAND;
+		if (!sec_ch_above)
+			val32 |= CCK0_SIDEBAND;
+		rtl8xxxu_write32(priv, REG_CCK0_SYSTEM, val32);
+
+		val32 = rtl8xxxu_read32(priv, REG_OFDM1_LSTF);
+		val32 &= ~OFDM_LSTF_PRIME_CH_MASK; /* 0xc00 */
+		if (sec_ch_above)
+			val32 |= OFDM_LSTF_PRIME_CH_LOW;
+		else
+			val32 |= OFDM_LSTF_PRIME_CH_HIGH;
+		rtl8xxxu_write32(priv, REG_OFDM1_LSTF, val32);
+
+		val32 = rtl8xxxu_read32(priv, REG_FPGA0_POWER_SAVE);
+		val32 &= ~(FPGA0_PS_LOWER_CHANNEL | FPGA0_PS_UPPER_CHANNEL);
+		if (sec_ch_above)
+			val32 |= FPGA0_PS_UPPER_CHANNEL;
+		else
+			val32 |= FPGA0_PS_LOWER_CHANNEL;
+		rtl8xxxu_write32(priv, REG_FPGA0_POWER_SAVE, val32);
+		break;
+	case NL80211_CHAN_WIDTH_80:
+		rf_mode_bw |= WMAC_TRXPTCL_CTL_BW_80;
+		break;
+	default:
+		break;
+	}
+
+	for (i = RF_A; i < priv->rf_paths; i++) {
+		val32 = rtl8xxxu_read_rfreg(priv, i, RF6052_REG_MODE_AG);
+		val32 &= ~MODE_AG_CHANNEL_MASK;
+		val32 |= channel;
+		rtl8xxxu_write_rfreg(priv, i, RF6052_REG_MODE_AG, val32);
+	}
+
+	rtl8xxxu_write16(priv, REG_WMAC_TRXPTCL_CTL, rf_mode_bw);
+	rtl8xxxu_write8(priv, REG_DATA_SUBCHANNEL, subchannel);
+
+	if (ht)
+		val8 = 0x0e;
+	else
+		val8 = 0x0a;
+
+	rtl8xxxu_write8(priv, REG_SIFS_CCK + 1, val8);
+	rtl8xxxu_write8(priv, REG_SIFS_OFDM + 1, val8);
+
+	rtl8xxxu_write16(priv, REG_R2T_SIFS, 0x0808);
+	rtl8xxxu_write16(priv, REG_T2T_SIFS, 0x0a0a);
+
+	for (i = RF_A; i < priv->rf_paths; i++) {
+		val32 = rtl8xxxu_read_rfreg(priv, i, RF6052_REG_MODE_AG);
+		val32 &= ~MODE_AG_BW_MASK;
+		switch(hw->conf.chandef.width) {
+		case NL80211_CHAN_WIDTH_80:
+			val32 |= MODE_AG_BW_80MHZ_8723B;
+			break;
+		case NL80211_CHAN_WIDTH_40:
+			val32 |= MODE_AG_BW_40MHZ_8723B;
+			break;
+		default:
+			val32 |= MODE_AG_BW_20MHZ_8723B;
+			break;
+		}
+		rtl8xxxu_write_rfreg(priv, i, RF6052_REG_MODE_AG, val32);
+	}
+}
+
+void
+rtl8xxxu_gen1_set_tx_power(struct rtl8xxxu_priv *priv, int channel, bool ht40)
+{
+	struct rtl8xxxu_power_base *power_base = priv->power_base;
+	u8 cck[RTL8723A_MAX_RF_PATHS], ofdm[RTL8723A_MAX_RF_PATHS];
+	u8 ofdmbase[RTL8723A_MAX_RF_PATHS], mcsbase[RTL8723A_MAX_RF_PATHS];
+	u32 val32, ofdm_a, ofdm_b, mcs_a, mcs_b;
+	u8 val8;
+	int group, i;
+
+	group = rtl8xxxu_gen1_channel_to_group(channel);
+
+	cck[0] = priv->cck_tx_power_index_A[group] - 1;
+	cck[1] = priv->cck_tx_power_index_B[group] - 1;
+
+	if (priv->hi_pa) {
+		if (cck[0] > 0x20)
+			cck[0] = 0x20;
+		if (cck[1] > 0x20)
+			cck[1] = 0x20;
+	}
+
+	ofdm[0] = priv->ht40_1s_tx_power_index_A[group];
+	ofdm[1] = priv->ht40_1s_tx_power_index_B[group];
+	if (ofdm[0])
+		ofdm[0] -= 1;
+	if (ofdm[1])
+		ofdm[1] -= 1;
+
+	ofdmbase[0] = ofdm[0] +	priv->ofdm_tx_power_index_diff[group].a;
+	ofdmbase[1] = ofdm[1] +	priv->ofdm_tx_power_index_diff[group].b;
+
+	mcsbase[0] = ofdm[0];
+	mcsbase[1] = ofdm[1];
+	if (!ht40) {
+		mcsbase[0] += priv->ht20_tx_power_index_diff[group].a;
+		mcsbase[1] += priv->ht20_tx_power_index_diff[group].b;
+	}
+
+	if (priv->tx_paths > 1) {
+		if (ofdm[0] > priv->ht40_2s_tx_power_index_diff[group].a)
+			ofdm[0] -=  priv->ht40_2s_tx_power_index_diff[group].a;
+		if (ofdm[1] > priv->ht40_2s_tx_power_index_diff[group].b)
+			ofdm[1] -=  priv->ht40_2s_tx_power_index_diff[group].b;
+	}
+
+	if (rtl8xxxu_debug & RTL8XXXU_DEBUG_CHANNEL)
+		dev_info(&priv->udev->dev,
+			 "%s: Setting TX power CCK A: %02x, "
+			 "CCK B: %02x, OFDM A: %02x, OFDM B: %02x\n",
+			 __func__, cck[0], cck[1], ofdm[0], ofdm[1]);
+
+	for (i = 0; i < RTL8723A_MAX_RF_PATHS; i++) {
+		if (cck[i] > RF6052_MAX_TX_PWR)
+			cck[i] = RF6052_MAX_TX_PWR;
+		if (ofdm[i] > RF6052_MAX_TX_PWR)
+			ofdm[i] = RF6052_MAX_TX_PWR;
+	}
+
+	val32 = rtl8xxxu_read32(priv, REG_TX_AGC_A_CCK1_MCS32);
+	val32 &= 0xffff00ff;
+	val32 |= (cck[0] << 8);
+	rtl8xxxu_write32(priv, REG_TX_AGC_A_CCK1_MCS32, val32);
+
+	val32 = rtl8xxxu_read32(priv, REG_TX_AGC_B_CCK11_A_CCK2_11);
+	val32 &= 0xff;
+	val32 |= ((cck[0] << 8) | (cck[0] << 16) | (cck[0] << 24));
+	rtl8xxxu_write32(priv, REG_TX_AGC_B_CCK11_A_CCK2_11, val32);
+
+	val32 = rtl8xxxu_read32(priv, REG_TX_AGC_B_CCK11_A_CCK2_11);
+	val32 &= 0xffffff00;
+	val32 |= cck[1];
+	rtl8xxxu_write32(priv, REG_TX_AGC_B_CCK11_A_CCK2_11, val32);
+
+	val32 = rtl8xxxu_read32(priv, REG_TX_AGC_B_CCK1_55_MCS32);
+	val32 &= 0xff;
+	val32 |= ((cck[1] << 8) | (cck[1] << 16) | (cck[1] << 24));
+	rtl8xxxu_write32(priv, REG_TX_AGC_B_CCK1_55_MCS32, val32);
+
+	ofdm_a = ofdmbase[0] | ofdmbase[0] << 8 |
+		ofdmbase[0] << 16 | ofdmbase[0] << 24;
+	ofdm_b = ofdmbase[1] | ofdmbase[1] << 8 |
+		ofdmbase[1] << 16 | ofdmbase[1] << 24;
+
+	rtl8xxxu_write32(priv, REG_TX_AGC_A_RATE18_06,
+			 ofdm_a + power_base->reg_0e00);
+	rtl8xxxu_write32(priv, REG_TX_AGC_B_RATE18_06,
+			 ofdm_b + power_base->reg_0830);
+
+	rtl8xxxu_write32(priv, REG_TX_AGC_A_RATE54_24,
+			 ofdm_a + power_base->reg_0e04);
+	rtl8xxxu_write32(priv, REG_TX_AGC_B_RATE54_24,
+			 ofdm_b + power_base->reg_0834);
+
+	mcs_a = mcsbase[0] | mcsbase[0] << 8 |
+		mcsbase[0] << 16 | mcsbase[0] << 24;
+	mcs_b = mcsbase[1] | mcsbase[1] << 8 |
+		mcsbase[1] << 16 | mcsbase[1] << 24;
+
+	rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS03_MCS00,
+			 mcs_a + power_base->reg_0e10);
+	rtl8xxxu_write32(priv, REG_TX_AGC_B_MCS03_MCS00,
+			 mcs_b + power_base->reg_083c);
+
+	rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS07_MCS04,
+			 mcs_a + power_base->reg_0e14);
+	rtl8xxxu_write32(priv, REG_TX_AGC_B_MCS07_MCS04,
+			 mcs_b + power_base->reg_0848);
+
+	rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS11_MCS08,
+			 mcs_a + power_base->reg_0e18);
+	rtl8xxxu_write32(priv, REG_TX_AGC_B_MCS11_MCS08,
+			 mcs_b + power_base->reg_084c);
+
+	rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS15_MCS12,
+			 mcs_a + power_base->reg_0e1c);
+	for (i = 0; i < 3; i++) {
+		if (i != 2)
+			val8 = (mcsbase[0] > 8) ? (mcsbase[0] - 8) : 0;
+		else
+			val8 = (mcsbase[0] > 6) ? (mcsbase[0] - 6) : 0;
+		rtl8xxxu_write8(priv, REG_OFDM0_XC_TX_IQ_IMBALANCE + i, val8);
+	}
+	rtl8xxxu_write32(priv, REG_TX_AGC_B_MCS15_MCS12,
+			 mcs_b + power_base->reg_0868);
+	for (i = 0; i < 3; i++) {
+		if (i != 2)
+			val8 = (mcsbase[1] > 8) ? (mcsbase[1] - 8) : 0;
+		else
+			val8 = (mcsbase[1] > 6) ? (mcsbase[1] - 6) : 0;
+		rtl8xxxu_write8(priv, REG_OFDM0_XD_TX_IQ_IMBALANCE + i, val8);
+	}
+}
+
+static void rtl8xxxu_set_linktype(struct rtl8xxxu_priv *priv,
+				  enum nl80211_iftype linktype)
+{
+	u8 val8;
+
+	val8 = rtl8xxxu_read8(priv, REG_MSR);
+	val8 &= ~MSR_LINKTYPE_MASK;
+
+	switch (linktype) {
+	case NL80211_IFTYPE_UNSPECIFIED:
+		val8 |= MSR_LINKTYPE_NONE;
+		break;
+	case NL80211_IFTYPE_ADHOC:
+		val8 |= MSR_LINKTYPE_ADHOC;
+		break;
+	case NL80211_IFTYPE_STATION:
+		val8 |= MSR_LINKTYPE_STATION;
+		break;
+	case NL80211_IFTYPE_AP:
+		val8 |= MSR_LINKTYPE_AP;
+		break;
+	default:
+		goto out;
+	}
+
+	rtl8xxxu_write8(priv, REG_MSR, val8);
+out:
+	return;
+}
+
+static void
+rtl8xxxu_set_retry(struct rtl8xxxu_priv *priv, u16 short_retry, u16 long_retry)
+{
+	u16 val16;
+
+	val16 = ((short_retry << RETRY_LIMIT_SHORT_SHIFT) &
+		 RETRY_LIMIT_SHORT_MASK) |
+		((long_retry << RETRY_LIMIT_LONG_SHIFT) &
+		 RETRY_LIMIT_LONG_MASK);
+
+	rtl8xxxu_write16(priv, REG_RETRY_LIMIT, val16);
+}
+
+static void
+rtl8xxxu_set_spec_sifs(struct rtl8xxxu_priv *priv, u16 cck, u16 ofdm)
+{
+	u16 val16;
+
+	val16 = ((cck << SPEC_SIFS_CCK_SHIFT) & SPEC_SIFS_CCK_MASK) |
+		((ofdm << SPEC_SIFS_OFDM_SHIFT) & SPEC_SIFS_OFDM_MASK);
+
+	rtl8xxxu_write16(priv, REG_SPEC_SIFS, val16);
+}
+
+static void rtl8xxxu_print_chipinfo(struct rtl8xxxu_priv *priv)
+{
+	struct device *dev = &priv->udev->dev;
+	char cut = 'A' + priv->chip_cut;
+
+	dev_info(dev,
+		 "RTL%s rev %c (%s) romver %d, %iT%iR, TX queues %i, WiFi=%i, BT=%i, GPS=%i, HI PA=%i\n",
+		 priv->chip_name, cut, priv->chip_vendor, priv->rom_rev,
+		 priv->tx_paths, priv->rx_paths, priv->ep_tx_count,
+		 priv->has_wifi, priv->has_bluetooth, priv->has_gps,
+		 priv->hi_pa);
+
+	dev_info(dev, "RTL%s MAC: %pM\n", priv->chip_name, priv->mac_addr);
+}
+
+void rtl8xxxu_identify_vendor_1bit(struct rtl8xxxu_priv *priv, u32 vendor)
+{
+	if (vendor) {
+		strscpy(priv->chip_vendor, "UMC", sizeof(priv->chip_vendor));
+		priv->vendor_umc = 1;
+	} else {
+		strscpy(priv->chip_vendor, "TSMC", sizeof(priv->chip_vendor));
+	}
+}
+
+void rtl8xxxu_identify_vendor_2bits(struct rtl8xxxu_priv *priv, u32 vendor)
+{
+	switch (vendor) {
+	case SYS_CFG_VENDOR_ID_TSMC:
+		strscpy(priv->chip_vendor, "TSMC", sizeof(priv->chip_vendor));
+		break;
+	case SYS_CFG_VENDOR_ID_SMIC:
+		strscpy(priv->chip_vendor, "SMIC", sizeof(priv->chip_vendor));
+		priv->vendor_smic = 1;
+		break;
+	case SYS_CFG_VENDOR_ID_UMC:
+		strscpy(priv->chip_vendor, "UMC", sizeof(priv->chip_vendor));
+		priv->vendor_umc = 1;
+		break;
+	default:
+		strscpy(priv->chip_vendor, "unknown", sizeof(priv->chip_vendor));
+	}
+}
+
+void rtl8xxxu_config_endpoints_sie(struct rtl8xxxu_priv *priv)
+{
+	u16 val16;
+
+	val16 = rtl8xxxu_read16(priv, REG_NORMAL_SIE_EP_TX);
+
+	if (val16 & NORMAL_SIE_EP_TX_HIGH_MASK) {
+		priv->ep_tx_high_queue = 1;
+		priv->ep_tx_count++;
+	}
+
+	if (val16 & NORMAL_SIE_EP_TX_NORMAL_MASK) {
+		priv->ep_tx_normal_queue = 1;
+		priv->ep_tx_count++;
+	}
+
+	if (val16 & NORMAL_SIE_EP_TX_LOW_MASK) {
+		priv->ep_tx_low_queue = 1;
+		priv->ep_tx_count++;
+	}
+}
+
+int rtl8xxxu_config_endpoints_no_sie(struct rtl8xxxu_priv *priv)
+{
+	struct device *dev = &priv->udev->dev;
+
+	switch (priv->nr_out_eps) {
+	case 6:
+	case 5:
+	case 4:
+	case 3:
+		priv->ep_tx_low_queue = 1;
+		priv->ep_tx_count++;
+		fallthrough;
+	case 2:
+		priv->ep_tx_normal_queue = 1;
+		priv->ep_tx_count++;
+		fallthrough;
+	case 1:
+		priv->ep_tx_high_queue = 1;
+		priv->ep_tx_count++;
+		break;
+	default:
+		dev_info(dev, "Unsupported USB TX end-points\n");
+		return -ENOTSUPP;
+	}
+
+	return 0;
+}
+
+int
+rtl8xxxu_read_efuse8(struct rtl8xxxu_priv *priv, u16 offset, u8 *data)
+{
+	int i;
+	u8 val8;
+	u32 val32;
+
+	/* Write Address */
+	rtl8xxxu_write8(priv, REG_EFUSE_CTRL + 1, offset & 0xff);
+	val8 = rtl8xxxu_read8(priv, REG_EFUSE_CTRL + 2);
+	val8 &= 0xfc;
+	val8 |= (offset >> 8) & 0x03;
+	rtl8xxxu_write8(priv, REG_EFUSE_CTRL + 2, val8);
+
+	val8 = rtl8xxxu_read8(priv, REG_EFUSE_CTRL + 3);
+	rtl8xxxu_write8(priv, REG_EFUSE_CTRL + 3, val8 & 0x7f);
+
+	/* Poll for data read */
+	val32 = rtl8xxxu_read32(priv, REG_EFUSE_CTRL);
+	for (i = 0; i < RTL8XXXU_MAX_REG_POLL; i++) {
+		val32 = rtl8xxxu_read32(priv, REG_EFUSE_CTRL);
+		if (val32 & BIT(31))
+			break;
+	}
+
+	if (i == RTL8XXXU_MAX_REG_POLL)
+		return -EIO;
+
+	udelay(50);
+	val32 = rtl8xxxu_read32(priv, REG_EFUSE_CTRL);
+
+	*data = val32 & 0xff;
+	return 0;
+}
+
+int rtl8xxxu_read_efuse(struct rtl8xxxu_priv *priv)
+{
+	struct device *dev = &priv->udev->dev;
+	int i, ret = 0;
+	u8 val8, word_mask, header, extheader;
+	u16 val16, efuse_addr, offset;
+	u32 val32;
+
+	val16 = rtl8xxxu_read16(priv, REG_9346CR);
+	if (val16 & EEPROM_ENABLE)
+		priv->has_eeprom = 1;
+	if (val16 & EEPROM_BOOT)
+		priv->boot_eeprom = 1;
+
+	if (priv->is_multi_func) {
+		val32 = rtl8xxxu_read32(priv, REG_EFUSE_TEST);
+		val32 = (val32 & ~EFUSE_SELECT_MASK) | EFUSE_WIFI_SELECT;
+		rtl8xxxu_write32(priv, REG_EFUSE_TEST, val32);
+	}
+
+	dev_dbg(dev, "Booting from %s\n",
+		priv->boot_eeprom ? "EEPROM" : "EFUSE");
+
+	rtl8xxxu_write8(priv, REG_EFUSE_ACCESS, EFUSE_ACCESS_ENABLE);
+
+	/*  1.2V Power: From VDDON with Power Cut(0x0000[15]), default valid */
+	val16 = rtl8xxxu_read16(priv, REG_SYS_ISO_CTRL);
+	if (!(val16 & SYS_ISO_PWC_EV12V)) {
+		val16 |= SYS_ISO_PWC_EV12V;
+		rtl8xxxu_write16(priv, REG_SYS_ISO_CTRL, val16);
+	}
+	/*  Reset: 0x0000[28], default valid */
+	val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC);
+	if (!(val16 & SYS_FUNC_ELDR)) {
+		val16 |= SYS_FUNC_ELDR;
+		rtl8xxxu_write16(priv, REG_SYS_FUNC, val16);
+	}
+
+	/*
+	 * Clock: Gated(0x0008[5]) 8M(0x0008[1]) clock from ANA, default valid
+	 */
+	val16 = rtl8xxxu_read16(priv, REG_SYS_CLKR);
+	if (!(val16 & SYS_CLK_LOADER_ENABLE) || !(val16 & SYS_CLK_ANA8M)) {
+		val16 |= (SYS_CLK_LOADER_ENABLE | SYS_CLK_ANA8M);
+		rtl8xxxu_write16(priv, REG_SYS_CLKR, val16);
+	}
+
+	/* Default value is 0xff */
+	memset(priv->efuse_wifi.raw, 0xff, EFUSE_MAP_LEN);
+
+	efuse_addr = 0;
+	while (efuse_addr < EFUSE_REAL_CONTENT_LEN_8723A) {
+		u16 map_addr;
+
+		ret = rtl8xxxu_read_efuse8(priv, efuse_addr++, &header);
+		if (ret || header == 0xff)
+			goto exit;
+
+		if ((header & 0x1f) == 0x0f) {	/* extended header */
+			offset = (header & 0xe0) >> 5;
+
+			ret = rtl8xxxu_read_efuse8(priv, efuse_addr++,
+						   &extheader);
+			if (ret)
+				goto exit;
+			/* All words disabled */
+			if ((extheader & 0x0f) == 0x0f)
+				continue;
+
+			offset |= ((extheader & 0xf0) >> 1);
+			word_mask = extheader & 0x0f;
+		} else {
+			offset = (header >> 4) & 0x0f;
+			word_mask = header & 0x0f;
+		}
+
+		/* Get word enable value from PG header */
+
+		/* We have 8 bits to indicate validity */
+		map_addr = offset * 8;
+		for (i = 0; i < EFUSE_MAX_WORD_UNIT; i++) {
+			/* Check word enable condition in the section */
+			if (word_mask & BIT(i)) {
+				map_addr += 2;
+				continue;
+			}
+
+			ret = rtl8xxxu_read_efuse8(priv, efuse_addr++, &val8);
+			if (ret)
+				goto exit;
+			if (map_addr >= EFUSE_MAP_LEN - 1) {
+				dev_warn(dev, "%s: Illegal map_addr (%04x), "
+					 "efuse corrupt!\n",
+					 __func__, map_addr);
+				ret = -EINVAL;
+				goto exit;
+			}
+			priv->efuse_wifi.raw[map_addr++] = val8;
+
+			ret = rtl8xxxu_read_efuse8(priv, efuse_addr++, &val8);
+			if (ret)
+				goto exit;
+			priv->efuse_wifi.raw[map_addr++] = val8;
+		}
+	}
+
+exit:
+	rtl8xxxu_write8(priv, REG_EFUSE_ACCESS, EFUSE_ACCESS_DISABLE);
+
+	return ret;
+}
+
+static void rtl8xxxu_dump_efuse(struct rtl8xxxu_priv *priv)
+{
+	dev_info(&priv->udev->dev,
+		 "Dumping efuse for RTL%s (0x%02x bytes):\n",
+		 priv->chip_name, EFUSE_MAP_LEN);
+
+	print_hex_dump(KERN_INFO, "", DUMP_PREFIX_OFFSET, 16, 1,
+		       priv->efuse_wifi.raw, EFUSE_MAP_LEN, true);
+}
+
+void rtl8xxxu_reset_8051(struct rtl8xxxu_priv *priv)
+{
+	u8 val8;
+	u16 sys_func;
+
+	val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL + 1);
+	val8 &= ~BIT(0);
+	rtl8xxxu_write8(priv, REG_RSV_CTRL + 1, val8);
+
+	sys_func = rtl8xxxu_read16(priv, REG_SYS_FUNC);
+	sys_func &= ~SYS_FUNC_CPU_ENABLE;
+	rtl8xxxu_write16(priv, REG_SYS_FUNC, sys_func);
+
+	val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL + 1);
+	val8 |= BIT(0);
+	rtl8xxxu_write8(priv, REG_RSV_CTRL + 1, val8);
+
+	sys_func |= SYS_FUNC_CPU_ENABLE;
+	rtl8xxxu_write16(priv, REG_SYS_FUNC, sys_func);
+}
+
+static int rtl8xxxu_start_firmware(struct rtl8xxxu_priv *priv)
+{
+	struct device *dev = &priv->udev->dev;
+	u16 reg_mcu_fw_dl;
+	int ret = 0, i;
+	u32 val32;
+
+	if (priv->rtl_chip == RTL8710B)
+		reg_mcu_fw_dl = REG_8051FW_CTRL_V1_8710B;
+	else
+		reg_mcu_fw_dl = REG_MCU_FW_DL;
+
+	/* Poll checksum report */
+	for (i = 0; i < RTL8XXXU_FIRMWARE_POLL_MAX; i++) {
+		val32 = rtl8xxxu_read32(priv, reg_mcu_fw_dl);
+		if (val32 & MCU_FW_DL_CSUM_REPORT)
+			break;
+	}
+
+	if (i == RTL8XXXU_FIRMWARE_POLL_MAX) {
+		dev_warn(dev, "Firmware checksum poll timed out\n");
+		ret = -EAGAIN;
+		goto exit;
+	}
+
+	val32 = rtl8xxxu_read32(priv, reg_mcu_fw_dl);
+	val32 |= MCU_FW_DL_READY;
+	val32 &= ~MCU_WINT_INIT_READY;
+	rtl8xxxu_write32(priv, reg_mcu_fw_dl, val32);
+
+	/*
+	 * Reset the 8051 in order for the firmware to start running,
+	 * otherwise it won't come up on the 8192eu
+	 */
+	priv->fops->reset_8051(priv);
+
+	/* Wait for firmware to become ready */
+	for (i = 0; i < RTL8XXXU_FIRMWARE_POLL_MAX; i++) {
+		val32 = rtl8xxxu_read32(priv, reg_mcu_fw_dl);
+		if (val32 & MCU_WINT_INIT_READY)
+			break;
+
+		udelay(100);
+	}
+
+	if (i == RTL8XXXU_FIRMWARE_POLL_MAX) {
+		dev_warn(dev, "Firmware failed to start\n");
+		ret = -EAGAIN;
+		goto exit;
+	}
+
+	/*
+	 * Init H2C command
+	 */
+	if (priv->fops->init_reg_hmtfr)
+		rtl8xxxu_write8(priv, REG_HMTFR, 0x0f);
+exit:
+	return ret;
+}
+
+static int rtl8xxxu_download_firmware(struct rtl8xxxu_priv *priv)
+{
+	int pages, remainder, i, ret;
+	u16 reg_fw_start_address;
+	u16 reg_mcu_fw_dl;
+	u8 val8;
+	u16 val16;
+	u32 val32;
+	u8 *fwptr;
+
+	if (priv->rtl_chip == RTL8192F)
+		reg_fw_start_address = REG_FW_START_ADDRESS_8192F;
+	else
+		reg_fw_start_address = REG_FW_START_ADDRESS;
+
+	if (priv->rtl_chip == RTL8710B) {
+		reg_mcu_fw_dl = REG_8051FW_CTRL_V1_8710B;
+	} else {
+		reg_mcu_fw_dl = REG_MCU_FW_DL;
+
+		val8 = rtl8xxxu_read8(priv, REG_SYS_FUNC + 1);
+		val8 |= 4;
+		rtl8xxxu_write8(priv, REG_SYS_FUNC + 1, val8);
+
+		/* 8051 enable */
+		val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC);
+		val16 |= SYS_FUNC_CPU_ENABLE;
+		rtl8xxxu_write16(priv, REG_SYS_FUNC, val16);
+	}
+
+	val8 = rtl8xxxu_read8(priv, reg_mcu_fw_dl);
+	if (val8 & MCU_FW_RAM_SEL) {
+		dev_info(&priv->udev->dev,
+			 "Firmware is already running, resetting the MCU.\n");
+		rtl8xxxu_write8(priv, reg_mcu_fw_dl, 0x00);
+		priv->fops->reset_8051(priv);
+	}
+
+	/* MCU firmware download enable */
+	val8 = rtl8xxxu_read8(priv, reg_mcu_fw_dl);
+	val8 |= MCU_FW_DL_ENABLE;
+	rtl8xxxu_write8(priv, reg_mcu_fw_dl, val8);
+
+	/* 8051 reset */
+	val32 = rtl8xxxu_read32(priv, reg_mcu_fw_dl);
+	val32 &= ~BIT(19);
+	rtl8xxxu_write32(priv, reg_mcu_fw_dl, val32);
+
+	if (priv->rtl_chip == RTL8710B) {
+		/* We must set 0x8090[8]=1 before download FW. */
+		val8 = rtl8xxxu_read8(priv, reg_mcu_fw_dl + 1);
+		val8 |= BIT(0);
+		rtl8xxxu_write8(priv, reg_mcu_fw_dl + 1, val8);
+	}
+
+	/* Reset firmware download checksum */
+	val8 = rtl8xxxu_read8(priv, reg_mcu_fw_dl);
+	val8 |= MCU_FW_DL_CSUM_REPORT;
+	rtl8xxxu_write8(priv, reg_mcu_fw_dl, val8);
+
+	pages = priv->fw_size / RTL_FW_PAGE_SIZE;
+	remainder = priv->fw_size % RTL_FW_PAGE_SIZE;
+
+	fwptr = priv->fw_data->data;
+
+	for (i = 0; i < pages; i++) {
+		val8 = rtl8xxxu_read8(priv, reg_mcu_fw_dl + 2) & 0xF8;
+		val8 |= i;
+		rtl8xxxu_write8(priv, reg_mcu_fw_dl + 2, val8);
+
+		ret = rtl8xxxu_writeN(priv, reg_fw_start_address,
+				      fwptr, RTL_FW_PAGE_SIZE);
+		if (ret != RTL_FW_PAGE_SIZE) {
+			ret = -EAGAIN;
+			goto fw_abort;
+		}
+
+		fwptr += RTL_FW_PAGE_SIZE;
+	}
+
+	if (remainder) {
+		val8 = rtl8xxxu_read8(priv, reg_mcu_fw_dl + 2) & 0xF8;
+		val8 |= i;
+		rtl8xxxu_write8(priv, reg_mcu_fw_dl + 2, val8);
+		ret = rtl8xxxu_writeN(priv, reg_fw_start_address,
+				      fwptr, remainder);
+		if (ret != remainder) {
+			ret = -EAGAIN;
+			goto fw_abort;
+		}
+	}
+
+	ret = 0;
+fw_abort:
+	/* MCU firmware download disable */
+	val16 = rtl8xxxu_read16(priv, reg_mcu_fw_dl);
+	val16 &= ~MCU_FW_DL_ENABLE;
+	rtl8xxxu_write16(priv, reg_mcu_fw_dl, val16);
+
+	return ret;
+}
+
+int rtl8xxxu_load_firmware(struct rtl8xxxu_priv *priv, const char *fw_name)
+{
+	struct device *dev = &priv->udev->dev;
+	const struct firmware *fw;
+	int ret = 0;
+	u16 signature;
+
+	dev_info(dev, "%s: Loading firmware %s\n", DRIVER_NAME, fw_name);
+	if (request_firmware(&fw, fw_name, &priv->udev->dev)) {
+		dev_warn(dev, "request_firmware(%s) failed\n", fw_name);
+		ret = -EAGAIN;
+		goto exit;
+	}
+	if (!fw) {
+		dev_warn(dev, "Firmware data not available\n");
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	priv->fw_data = kmemdup(fw->data, fw->size, GFP_KERNEL);
+	if (!priv->fw_data) {
+		ret = -ENOMEM;
+		goto exit;
+	}
+	priv->fw_size = fw->size - sizeof(struct rtl8xxxu_firmware_header);
+
+	signature = le16_to_cpu(priv->fw_data->signature);
+	switch (signature & 0xfff0) {
+	case 0x92e0:
+	case 0x92c0:
+	case 0x88e0:
+	case 0x88c0:
+	case 0x5300:
+	case 0x2300:
+	case 0x88f0:
+	case 0x10b0:
+	case 0x92f0:
+		break;
+	default:
+		ret = -EINVAL;
+		dev_warn(dev, "%s: Invalid firmware signature: 0x%04x\n",
+			 __func__, signature);
+	}
+
+	dev_info(dev, "Firmware revision %i.%i (signature 0x%04x)\n",
+		 le16_to_cpu(priv->fw_data->major_version),
+		 priv->fw_data->minor_version, signature);
+
+exit:
+	release_firmware(fw);
+	return ret;
+}
+
+void rtl8xxxu_firmware_self_reset(struct rtl8xxxu_priv *priv)
+{
+	u16 val16;
+	int i = 100;
+
+	/* Inform 8051 to perform reset */
+	rtl8xxxu_write8(priv, REG_HMTFR + 3, 0x20);
+
+	for (i = 100; i > 0; i--) {
+		val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC);
+
+		if (!(val16 & SYS_FUNC_CPU_ENABLE)) {
+			dev_dbg(&priv->udev->dev,
+				"%s: Firmware self reset success!\n", __func__);
+			break;
+		}
+		udelay(50);
+	}
+
+	if (!i) {
+		/* Force firmware reset */
+		val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC);
+		val16 &= ~SYS_FUNC_CPU_ENABLE;
+		rtl8xxxu_write16(priv, REG_SYS_FUNC, val16);
+	}
+}
+
+static int
+rtl8xxxu_init_mac(struct rtl8xxxu_priv *priv)
+{
+	const struct rtl8xxxu_reg8val *array = priv->fops->mactable;
+	int i, ret;
+	u16 reg;
+	u8 val;
+
+	for (i = 0; ; i++) {
+		reg = array[i].reg;
+		val = array[i].val;
+
+		if (reg == 0xffff && val == 0xff)
+			break;
+
+		ret = rtl8xxxu_write8(priv, reg, val);
+		if (ret != 1) {
+			dev_warn(&priv->udev->dev,
+				 "Failed to initialize MAC "
+				 "(reg: %04x, val %02x)\n", reg, val);
+			return -EAGAIN;
+		}
+	}
+
+	switch (priv->rtl_chip) {
+	case RTL8188C:
+	case RTL8188R:
+	case RTL8191C:
+	case RTL8192C:
+	case RTL8723A:
+		rtl8xxxu_write8(priv, REG_MAX_AGGR_NUM, 0x0a);
+		break;
+	case RTL8188E:
+		rtl8xxxu_write16(priv, REG_MAX_AGGR_NUM, 0x0707);
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+int rtl8xxxu_init_phy_regs(struct rtl8xxxu_priv *priv,
+			   const struct rtl8xxxu_reg32val *array)
+{
+	int i, ret;
+	u16 reg;
+	u32 val;
+
+	for (i = 0; ; i++) {
+		reg = array[i].reg;
+		val = array[i].val;
+
+		if (reg == 0xffff && val == 0xffffffff)
+			break;
+
+		ret = rtl8xxxu_write32(priv, reg, val);
+		if (ret != sizeof(val)) {
+			dev_warn(&priv->udev->dev,
+				 "Failed to initialize PHY\n");
+			return -EAGAIN;
+		}
+		udelay(1);
+	}
+
+	return 0;
+}
+
+void rtl8xxxu_gen1_init_phy_bb(struct rtl8xxxu_priv *priv)
+{
+	u8 val8, ldoa15, ldov12d, lpldo, ldohci12;
+	u16 val16;
+	u32 val32;
+
+	val8 = rtl8xxxu_read8(priv, REG_AFE_PLL_CTRL);
+	udelay(2);
+	val8 |= AFE_PLL_320_ENABLE;
+	rtl8xxxu_write8(priv, REG_AFE_PLL_CTRL, val8);
+	udelay(2);
+
+	rtl8xxxu_write8(priv, REG_AFE_PLL_CTRL + 1, 0xff);
+	udelay(2);
+
+	val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC);
+	val16 |= SYS_FUNC_BB_GLB_RSTN | SYS_FUNC_BBRSTB;
+	rtl8xxxu_write16(priv, REG_SYS_FUNC, val16);
+
+	val32 = rtl8xxxu_read32(priv, REG_AFE_XTAL_CTRL);
+	val32 &= ~AFE_XTAL_RF_GATE;
+	if (priv->has_bluetooth)
+		val32 &= ~AFE_XTAL_BT_GATE;
+	rtl8xxxu_write32(priv, REG_AFE_XTAL_CTRL, val32);
+
+	/* 6. 0x1f[7:0] = 0x07 */
+	val8 = RF_ENABLE | RF_RSTB | RF_SDMRSTB;
+	rtl8xxxu_write8(priv, REG_RF_CTRL, val8);
+
+	if (priv->hi_pa)
+		rtl8xxxu_init_phy_regs(priv, rtl8188ru_phy_1t_highpa_table);
+	else if (priv->tx_paths == 2)
+		rtl8xxxu_init_phy_regs(priv, rtl8192cu_phy_2t_init_table);
+	else
+		rtl8xxxu_init_phy_regs(priv, rtl8723a_phy_1t_init_table);
+
+	if (priv->rtl_chip == RTL8188R && priv->hi_pa &&
+	    priv->vendor_umc && priv->chip_cut == 1)
+		rtl8xxxu_write8(priv, REG_OFDM0_AGC_PARM1 + 2, 0x50);
+
+	if (priv->hi_pa)
+		rtl8xxxu_init_phy_regs(priv, rtl8xxx_agc_highpa_table);
+	else
+		rtl8xxxu_init_phy_regs(priv, rtl8xxx_agc_standard_table);
+
+	ldoa15 = LDOA15_ENABLE | LDOA15_OBUF;
+	ldov12d = LDOV12D_ENABLE | BIT(2) | (2 << LDOV12D_VADJ_SHIFT);
+	ldohci12 = 0x57;
+	lpldo = 1;
+	val32 = (lpldo << 24) | (ldohci12 << 16) | (ldov12d << 8) | ldoa15;
+	rtl8xxxu_write32(priv, REG_LDOA15_CTRL, val32);
+}
+
+/*
+ * Most of this is black magic retrieved from the old rtl8723au driver
+ */
+static int rtl8xxxu_init_phy_bb(struct rtl8xxxu_priv *priv)
+{
+	u32 val32;
+
+	priv->fops->init_phy_bb(priv);
+
+	if (priv->tx_paths == 1 && priv->rx_paths == 2) {
+		/*
+		 * For 1T2R boards, patch the registers.
+		 *
+		 * It looks like 8191/2 1T2R boards use path B for TX
+		 */
+		val32 = rtl8xxxu_read32(priv, REG_FPGA0_TX_INFO);
+		val32 &= ~(BIT(0) | BIT(1));
+		val32 |= BIT(1);
+		rtl8xxxu_write32(priv, REG_FPGA0_TX_INFO, val32);
+
+		val32 = rtl8xxxu_read32(priv, REG_FPGA1_TX_INFO);
+		val32 &= ~0x300033;
+		val32 |= 0x200022;
+		rtl8xxxu_write32(priv, REG_FPGA1_TX_INFO, val32);
+
+		val32 = rtl8xxxu_read32(priv, REG_CCK0_AFE_SETTING);
+		val32 &= ~CCK0_AFE_RX_MASK;
+		val32 &= 0x00ffffff;
+		val32 |= 0x40000000;
+		val32 |= CCK0_AFE_RX_ANT_B;
+		rtl8xxxu_write32(priv, REG_CCK0_AFE_SETTING, val32);
+
+		val32 = rtl8xxxu_read32(priv, REG_OFDM0_TRX_PATH_ENABLE);
+		val32 &= ~(OFDM_RF_PATH_RX_MASK | OFDM_RF_PATH_TX_MASK);
+		val32 |= (OFDM_RF_PATH_RX_A | OFDM_RF_PATH_RX_B |
+			  OFDM_RF_PATH_TX_B);
+		rtl8xxxu_write32(priv, REG_OFDM0_TRX_PATH_ENABLE, val32);
+
+		val32 = rtl8xxxu_read32(priv, REG_OFDM0_AGC_PARM1);
+		val32 &= ~(BIT(4) | BIT(5));
+		val32 |= BIT(4);
+		rtl8xxxu_write32(priv, REG_OFDM0_AGC_PARM1, val32);
+
+		val32 = rtl8xxxu_read32(priv, REG_TX_CCK_RFON);
+		val32 &= ~(BIT(27) | BIT(26));
+		val32 |= BIT(27);
+		rtl8xxxu_write32(priv, REG_TX_CCK_RFON, val32);
+
+		val32 = rtl8xxxu_read32(priv, REG_TX_CCK_BBON);
+		val32 &= ~(BIT(27) | BIT(26));
+		val32 |= BIT(27);
+		rtl8xxxu_write32(priv, REG_TX_CCK_BBON, val32);
+
+		val32 = rtl8xxxu_read32(priv, REG_TX_OFDM_RFON);
+		val32 &= ~(BIT(27) | BIT(26));
+		val32 |= BIT(27);
+		rtl8xxxu_write32(priv, REG_TX_OFDM_RFON, val32);
+
+		val32 = rtl8xxxu_read32(priv, REG_TX_OFDM_BBON);
+		val32 &= ~(BIT(27) | BIT(26));
+		val32 |= BIT(27);
+		rtl8xxxu_write32(priv, REG_TX_OFDM_BBON, val32);
+
+		val32 = rtl8xxxu_read32(priv, REG_TX_TO_TX);
+		val32 &= ~(BIT(27) | BIT(26));
+		val32 |= BIT(27);
+		rtl8xxxu_write32(priv, REG_TX_TO_TX, val32);
+	}
+
+	if (priv->fops->set_crystal_cap)
+		priv->fops->set_crystal_cap(priv, priv->default_crystal_cap);
+
+	if (priv->rtl_chip == RTL8192E)
+		rtl8xxxu_write32(priv, REG_AFE_XTAL_CTRL, 0x000f81fb);
+
+	return 0;
+}
+
+static int rtl8xxxu_init_rf_regs(struct rtl8xxxu_priv *priv,
+				 const struct rtl8xxxu_rfregval *array,
+				 enum rtl8xxxu_rfpath path)
+{
+	int i, ret;
+	u8 reg;
+	u32 val;
+
+	for (i = 0; ; i++) {
+		reg = array[i].reg;
+		val = array[i].val;
+
+		if (reg == 0xff && val == 0xffffffff)
+			break;
+
+		switch (reg) {
+		case 0xfe:
+			msleep(50);
+			continue;
+		case 0xfd:
+			mdelay(5);
+			continue;
+		case 0xfc:
+			mdelay(1);
+			continue;
+		case 0xfb:
+			udelay(50);
+			continue;
+		case 0xfa:
+			udelay(5);
+			continue;
+		case 0xf9:
+			udelay(1);
+			continue;
+		}
+
+		ret = rtl8xxxu_write_rfreg(priv, path, reg, val);
+		if (ret) {
+			dev_warn(&priv->udev->dev,
+				 "Failed to initialize RF\n");
+			return -EAGAIN;
+		}
+		udelay(1);
+	}
+
+	return 0;
+}
+
+int rtl8xxxu_init_phy_rf(struct rtl8xxxu_priv *priv,
+			 const struct rtl8xxxu_rfregval *table,
+			 enum rtl8xxxu_rfpath path)
+{
+	u32 val32;
+	u16 val16, rfsi_rfenv;
+	u16 reg_sw_ctrl, reg_int_oe, reg_hssi_parm2;
+
+	switch (path) {
+	case RF_A:
+		reg_sw_ctrl = REG_FPGA0_XA_RF_SW_CTRL;
+		reg_int_oe = REG_FPGA0_XA_RF_INT_OE;
+		reg_hssi_parm2 = REG_FPGA0_XA_HSSI_PARM2;
+		break;
+	case RF_B:
+		reg_sw_ctrl = REG_FPGA0_XB_RF_SW_CTRL;
+		reg_int_oe = REG_FPGA0_XB_RF_INT_OE;
+		reg_hssi_parm2 = REG_FPGA0_XB_HSSI_PARM2;
+		break;
+	default:
+		dev_err(&priv->udev->dev, "%s:Unsupported RF path %c\n",
+			__func__, path + 'A');
+		return -EINVAL;
+	}
+	/* For path B, use XB */
+	rfsi_rfenv = rtl8xxxu_read16(priv, reg_sw_ctrl);
+	rfsi_rfenv &= FPGA0_RF_RFENV;
+
+	/*
+	 * These two we might be able to optimize into one
+	 */
+	val32 = rtl8xxxu_read32(priv, reg_int_oe);
+	val32 |= BIT(20);	/* 0x10 << 16 */
+	rtl8xxxu_write32(priv, reg_int_oe, val32);
+	udelay(1);
+
+	val32 = rtl8xxxu_read32(priv, reg_int_oe);
+	val32 |= BIT(4);
+	rtl8xxxu_write32(priv, reg_int_oe, val32);
+	udelay(1);
+
+	/*
+	 * These two we might be able to optimize into one
+	 */
+	val32 = rtl8xxxu_read32(priv, reg_hssi_parm2);
+	val32 &= ~FPGA0_HSSI_3WIRE_ADDR_LEN;
+	rtl8xxxu_write32(priv, reg_hssi_parm2, val32);
+	udelay(1);
+
+	val32 = rtl8xxxu_read32(priv, reg_hssi_parm2);
+	val32 &= ~FPGA0_HSSI_3WIRE_DATA_LEN;
+	rtl8xxxu_write32(priv, reg_hssi_parm2, val32);
+	udelay(1);
+
+	rtl8xxxu_init_rf_regs(priv, table, path);
+
+	/* For path B, use XB */
+	val16 = rtl8xxxu_read16(priv, reg_sw_ctrl);
+	val16 &= ~FPGA0_RF_RFENV;
+	val16 |= rfsi_rfenv;
+	rtl8xxxu_write16(priv, reg_sw_ctrl, val16);
+
+	return 0;
+}
+
+static int rtl8xxxu_llt_write(struct rtl8xxxu_priv *priv, u8 address, u8 data)
+{
+	int ret = -EBUSY;
+	int count = 0;
+	u32 value;
+
+	value = LLT_OP_WRITE | address << 8 | data;
+
+	rtl8xxxu_write32(priv, REG_LLT_INIT, value);
+
+	do {
+		value = rtl8xxxu_read32(priv, REG_LLT_INIT);
+		if ((value & LLT_OP_MASK) == LLT_OP_INACTIVE) {
+			ret = 0;
+			break;
+		}
+	} while (count++ < 20);
+
+	return ret;
+}
+
+int rtl8xxxu_init_llt_table(struct rtl8xxxu_priv *priv)
+{
+	int ret;
+	int i, last_entry;
+	u8 last_tx_page;
+
+	last_tx_page = priv->fops->total_page_num;
+
+	if (priv->fops->last_llt_entry)
+		last_entry = priv->fops->last_llt_entry;
+	else
+		last_entry = 255;
+
+	for (i = 0; i < last_tx_page; i++) {
+		ret = rtl8xxxu_llt_write(priv, i, i + 1);
+		if (ret)
+			goto exit;
+	}
+
+	ret = rtl8xxxu_llt_write(priv, last_tx_page, 0xff);
+	if (ret)
+		goto exit;
+
+	/* Mark remaining pages as a ring buffer */
+	for (i = last_tx_page + 1; i < last_entry; i++) {
+		ret = rtl8xxxu_llt_write(priv, i, (i + 1));
+		if (ret)
+			goto exit;
+	}
+
+	/*  Let last entry point to the start entry of ring buffer */
+	ret = rtl8xxxu_llt_write(priv, last_entry, last_tx_page + 1);
+	if (ret)
+		goto exit;
+
+exit:
+	return ret;
+}
+
+int rtl8xxxu_auto_llt_table(struct rtl8xxxu_priv *priv)
+{
+	u32 val32;
+	int ret = 0;
+	int i;
+
+	val32 = rtl8xxxu_read32(priv, REG_AUTO_LLT);
+	val32 |= AUTO_LLT_INIT_LLT;
+	rtl8xxxu_write32(priv, REG_AUTO_LLT, val32);
+
+	for (i = 500; i; i--) {
+		val32 = rtl8xxxu_read32(priv, REG_AUTO_LLT);
+		if (!(val32 & AUTO_LLT_INIT_LLT))
+			break;
+		usleep_range(2, 4);
+	}
+
+	if (!i) {
+		ret = -EBUSY;
+		dev_warn(&priv->udev->dev, "LLT table init failed\n");
+	}
+
+	return ret;
+}
+
+static int rtl8xxxu_init_queue_priority(struct rtl8xxxu_priv *priv)
+{
+	u16 val16, hi, lo;
+	u16 hiq, mgq, bkq, beq, viq, voq;
+	int hip, mgp, bkp, bep, vip, vop;
+	int ret = 0;
+	u32 val32;
+
+	switch (priv->ep_tx_count) {
+	case 1:
+		if (priv->ep_tx_high_queue) {
+			hi = TRXDMA_QUEUE_HIGH;
+		} else if (priv->ep_tx_low_queue) {
+			hi = TRXDMA_QUEUE_LOW;
+		} else if (priv->ep_tx_normal_queue) {
+			hi = TRXDMA_QUEUE_NORMAL;
+		} else {
+			hi = 0;
+			ret = -EINVAL;
+		}
+
+		hiq = hi;
+		mgq = hi;
+		bkq = hi;
+		beq = hi;
+		viq = hi;
+		voq = hi;
+
+		hip = 0;
+		mgp = 0;
+		bkp = 0;
+		bep = 0;
+		vip = 0;
+		vop = 0;
+		break;
+	case 2:
+		if (priv->ep_tx_high_queue && priv->ep_tx_low_queue) {
+			hi = TRXDMA_QUEUE_HIGH;
+			lo = TRXDMA_QUEUE_LOW;
+		} else if (priv->ep_tx_normal_queue && priv->ep_tx_low_queue) {
+			hi = TRXDMA_QUEUE_NORMAL;
+			lo = TRXDMA_QUEUE_LOW;
+		} else if (priv->ep_tx_high_queue && priv->ep_tx_normal_queue) {
+			hi = TRXDMA_QUEUE_HIGH;
+			lo = TRXDMA_QUEUE_NORMAL;
+		} else {
+			ret = -EINVAL;
+			hi = 0;
+			lo = 0;
+		}
+
+		hiq = hi;
+		mgq = hi;
+		bkq = lo;
+		beq = lo;
+		viq = hi;
+		voq = hi;
+
+		hip = 0;
+		mgp = 0;
+		bkp = 1;
+		bep = 1;
+		vip = 0;
+		vop = 0;
+		break;
+	case 3:
+		beq = TRXDMA_QUEUE_LOW;
+		bkq = TRXDMA_QUEUE_LOW;
+		viq = TRXDMA_QUEUE_NORMAL;
+		voq = TRXDMA_QUEUE_HIGH;
+		mgq = TRXDMA_QUEUE_HIGH;
+		hiq = TRXDMA_QUEUE_HIGH;
+
+		hip = hiq ^ 3;
+		mgp = mgq ^ 3;
+		bkp = bkq ^ 3;
+		bep = beq ^ 3;
+		vip = viq ^ 3;
+		vop = viq ^ 3;
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	/*
+	 * None of the vendor drivers are configuring the beacon
+	 * queue here .... why?
+	 */
+	if (!ret) {
+		/* Only RTL8192F seems to do it like this. */
+		if (priv->rtl_chip == RTL8192F) {
+			val32 = rtl8xxxu_read32(priv, REG_TRXDMA_CTRL);
+			val32 &= 0x7;
+			val32 |= (voq << TRXDMA_CTRL_VOQ_SHIFT_8192F) |
+				 (viq << TRXDMA_CTRL_VIQ_SHIFT_8192F) |
+				 (beq << TRXDMA_CTRL_BEQ_SHIFT_8192F) |
+				 (bkq << TRXDMA_CTRL_BKQ_SHIFT_8192F) |
+				 (mgq << TRXDMA_CTRL_MGQ_SHIFT_8192F) |
+				 (hiq << TRXDMA_CTRL_HIQ_SHIFT_8192F);
+			rtl8xxxu_write32(priv, REG_TRXDMA_CTRL, val32);
+		} else {
+			val16 = rtl8xxxu_read16(priv, REG_TRXDMA_CTRL);
+			val16 &= 0x7;
+			val16 |= (voq << TRXDMA_CTRL_VOQ_SHIFT) |
+				 (viq << TRXDMA_CTRL_VIQ_SHIFT) |
+				 (beq << TRXDMA_CTRL_BEQ_SHIFT) |
+				 (bkq << TRXDMA_CTRL_BKQ_SHIFT) |
+				 (mgq << TRXDMA_CTRL_MGQ_SHIFT) |
+				 (hiq << TRXDMA_CTRL_HIQ_SHIFT);
+			rtl8xxxu_write16(priv, REG_TRXDMA_CTRL, val16);
+		}
+
+		priv->pipe_out[TXDESC_QUEUE_VO] =
+			usb_sndbulkpipe(priv->udev, priv->out_ep[vop]);
+		priv->pipe_out[TXDESC_QUEUE_VI] =
+			usb_sndbulkpipe(priv->udev, priv->out_ep[vip]);
+		priv->pipe_out[TXDESC_QUEUE_BE] =
+			usb_sndbulkpipe(priv->udev, priv->out_ep[bep]);
+		priv->pipe_out[TXDESC_QUEUE_BK] =
+			usb_sndbulkpipe(priv->udev, priv->out_ep[bkp]);
+		priv->pipe_out[TXDESC_QUEUE_BEACON] =
+			usb_sndbulkpipe(priv->udev, priv->out_ep[0]);
+		priv->pipe_out[TXDESC_QUEUE_MGNT] =
+			usb_sndbulkpipe(priv->udev, priv->out_ep[mgp]);
+		priv->pipe_out[TXDESC_QUEUE_HIGH] =
+			usb_sndbulkpipe(priv->udev, priv->out_ep[hip]);
+		priv->pipe_out[TXDESC_QUEUE_CMD] =
+			usb_sndbulkpipe(priv->udev, priv->out_ep[0]);
+	}
+
+	return ret;
+}
+
+void rtl8xxxu_fill_iqk_matrix_a(struct rtl8xxxu_priv *priv, bool iqk_ok,
+				int result[][8], int candidate, bool tx_only)
+{
+	u32 oldval, x, tx0_a, reg;
+	int y, tx0_c;
+	u32 val32;
+
+	if (!iqk_ok)
+		return;
+
+	val32 = rtl8xxxu_read32(priv, REG_OFDM0_XA_TX_IQ_IMBALANCE);
+	oldval = val32 >> 22;
+
+	x = result[candidate][0];
+	if ((x & 0x00000200) != 0)
+		x = x | 0xfffffc00;
+	tx0_a = (x * oldval) >> 8;
+
+	val32 = rtl8xxxu_read32(priv, REG_OFDM0_XA_TX_IQ_IMBALANCE);
+	val32 &= ~0x3ff;
+	val32 |= tx0_a;
+	rtl8xxxu_write32(priv, REG_OFDM0_XA_TX_IQ_IMBALANCE, val32);
+
+	val32 = rtl8xxxu_read32(priv, REG_OFDM0_ENERGY_CCA_THRES);
+	val32 &= ~BIT(31);
+	if ((x * oldval >> 7) & 0x1)
+		val32 |= BIT(31);
+	rtl8xxxu_write32(priv, REG_OFDM0_ENERGY_CCA_THRES, val32);
+
+	y = result[candidate][1];
+	if ((y & 0x00000200) != 0)
+		y = y | 0xfffffc00;
+	tx0_c = (y * oldval) >> 8;
+
+	val32 = rtl8xxxu_read32(priv, REG_OFDM0_XC_TX_AFE);
+	val32 &= ~0xf0000000;
+	val32 |= (((tx0_c & 0x3c0) >> 6) << 28);
+	rtl8xxxu_write32(priv, REG_OFDM0_XC_TX_AFE, val32);
+
+	val32 = rtl8xxxu_read32(priv, REG_OFDM0_XA_TX_IQ_IMBALANCE);
+	val32 &= ~0x003f0000;
+	val32 |= ((tx0_c & 0x3f) << 16);
+	rtl8xxxu_write32(priv, REG_OFDM0_XA_TX_IQ_IMBALANCE, val32);
+
+	val32 = rtl8xxxu_read32(priv, REG_OFDM0_ENERGY_CCA_THRES);
+	val32 &= ~BIT(29);
+	if ((y * oldval >> 7) & 0x1)
+		val32 |= BIT(29);
+	rtl8xxxu_write32(priv, REG_OFDM0_ENERGY_CCA_THRES, val32);
+
+	if (tx_only) {
+		dev_dbg(&priv->udev->dev, "%s: only TX\n", __func__);
+		return;
+	}
+
+	reg = result[candidate][2];
+
+	val32 = rtl8xxxu_read32(priv, REG_OFDM0_XA_RX_IQ_IMBALANCE);
+	val32 &= ~0x3ff;
+	val32 |= (reg & 0x3ff);
+	rtl8xxxu_write32(priv, REG_OFDM0_XA_RX_IQ_IMBALANCE, val32);
+
+	reg = result[candidate][3] & 0x3F;
+
+	val32 = rtl8xxxu_read32(priv, REG_OFDM0_XA_RX_IQ_IMBALANCE);
+	val32 &= ~0xfc00;
+	val32 |= ((reg << 10) & 0xfc00);
+	rtl8xxxu_write32(priv, REG_OFDM0_XA_RX_IQ_IMBALANCE, val32);
+
+	reg = (result[candidate][3] >> 6) & 0xF;
+
+	val32 = rtl8xxxu_read32(priv, REG_OFDM0_RX_IQ_EXT_ANTA);
+	val32 &= ~0xf0000000;
+	val32 |= (reg << 28);
+	rtl8xxxu_write32(priv, REG_OFDM0_RX_IQ_EXT_ANTA, val32);
+}
+
+void rtl8xxxu_fill_iqk_matrix_b(struct rtl8xxxu_priv *priv, bool iqk_ok,
+				int result[][8], int candidate, bool tx_only)
+{
+	u32 oldval, x, tx1_a, reg;
+	int y, tx1_c;
+	u32 val32;
+
+	if (!iqk_ok)
+		return;
+
+	val32 = rtl8xxxu_read32(priv, REG_OFDM0_XB_TX_IQ_IMBALANCE);
+	oldval = val32 >> 22;
+
+	x = result[candidate][4];
+	if ((x & 0x00000200) != 0)
+		x = x | 0xfffffc00;
+	tx1_a = (x * oldval) >> 8;
+
+	val32 = rtl8xxxu_read32(priv, REG_OFDM0_XB_TX_IQ_IMBALANCE);
+	val32 &= ~0x3ff;
+	val32 |= tx1_a;
+	rtl8xxxu_write32(priv, REG_OFDM0_XB_TX_IQ_IMBALANCE, val32);
+
+	val32 = rtl8xxxu_read32(priv, REG_OFDM0_ENERGY_CCA_THRES);
+	val32 &= ~BIT(27);
+	if ((x * oldval >> 7) & 0x1)
+		val32 |= BIT(27);
+	rtl8xxxu_write32(priv, REG_OFDM0_ENERGY_CCA_THRES, val32);
+
+	y = result[candidate][5];
+	if ((y & 0x00000200) != 0)
+		y = y | 0xfffffc00;
+	tx1_c = (y * oldval) >> 8;
+
+	val32 = rtl8xxxu_read32(priv, REG_OFDM0_XD_TX_AFE);
+	val32 &= ~0xf0000000;
+	val32 |= (((tx1_c & 0x3c0) >> 6) << 28);
+	rtl8xxxu_write32(priv, REG_OFDM0_XD_TX_AFE, val32);
+
+	val32 = rtl8xxxu_read32(priv, REG_OFDM0_XB_TX_IQ_IMBALANCE);
+	val32 &= ~0x003f0000;
+	val32 |= ((tx1_c & 0x3f) << 16);
+	rtl8xxxu_write32(priv, REG_OFDM0_XB_TX_IQ_IMBALANCE, val32);
+
+	val32 = rtl8xxxu_read32(priv, REG_OFDM0_ENERGY_CCA_THRES);
+	val32 &= ~BIT(25);
+	if ((y * oldval >> 7) & 0x1)
+		val32 |= BIT(25);
+	rtl8xxxu_write32(priv, REG_OFDM0_ENERGY_CCA_THRES, val32);
+
+	if (tx_only) {
+		dev_dbg(&priv->udev->dev, "%s: only TX\n", __func__);
+		return;
+	}
+
+	reg = result[candidate][6];
+
+	val32 = rtl8xxxu_read32(priv, REG_OFDM0_XB_RX_IQ_IMBALANCE);
+	val32 &= ~0x3ff;
+	val32 |= (reg & 0x3ff);
+	rtl8xxxu_write32(priv, REG_OFDM0_XB_RX_IQ_IMBALANCE, val32);
+
+	reg = result[candidate][7] & 0x3f;
+
+	val32 = rtl8xxxu_read32(priv, REG_OFDM0_XB_RX_IQ_IMBALANCE);
+	val32 &= ~0xfc00;
+	val32 |= ((reg << 10) & 0xfc00);
+	rtl8xxxu_write32(priv, REG_OFDM0_XB_RX_IQ_IMBALANCE, val32);
+
+	reg = (result[candidate][7] >> 6) & 0xf;
+
+	if (priv->rtl_chip == RTL8192F) {
+		rtl8xxxu_write32_mask(priv, REG_RXIQB_EXT, 0x000000f0, reg);
+	} else {
+		val32 = rtl8xxxu_read32(priv, REG_OFDM0_AGC_RSSI_TABLE);
+		val32 &= ~0x0000f000;
+		val32 |= (reg << 12);
+		rtl8xxxu_write32(priv, REG_OFDM0_AGC_RSSI_TABLE, val32);
+	}
+}
+
+#define MAX_TOLERANCE		5
+
+bool rtl8xxxu_simularity_compare(struct rtl8xxxu_priv *priv,
+				 int result[][8], int c1, int c2)
+{
+	u32 i, j, diff, simubitmap, bound = 0;
+	int candidate[2] = {-1, -1};	/* for path A and path B */
+	bool retval = true;
+
+	if (priv->tx_paths > 1)
+		bound = 8;
+	else
+		bound = 4;
+
+	simubitmap = 0;
+
+	for (i = 0; i < bound; i++) {
+		diff = (result[c1][i] > result[c2][i]) ?
+			(result[c1][i] - result[c2][i]) :
+			(result[c2][i] - result[c1][i]);
+		if (diff > MAX_TOLERANCE) {
+			if ((i == 2 || i == 6) && !simubitmap) {
+				if (result[c1][i] + result[c1][i + 1] == 0)
+					candidate[(i / 4)] = c2;
+				else if (result[c2][i] + result[c2][i + 1] == 0)
+					candidate[(i / 4)] = c1;
+				else
+					simubitmap = simubitmap | (1 << i);
+			} else {
+				simubitmap = simubitmap | (1 << i);
+			}
+		}
+	}
+
+	if (simubitmap == 0) {
+		for (i = 0; i < (bound / 4); i++) {
+			if (candidate[i] >= 0) {
+				for (j = i * 4; j < (i + 1) * 4 - 2; j++)
+					result[3][j] = result[candidate[i]][j];
+				retval = false;
+			}
+		}
+		return retval;
+	} else if (!(simubitmap & 0x0f)) {
+		/* path A OK */
+		for (i = 0; i < 4; i++)
+			result[3][i] = result[c1][i];
+	} else if (!(simubitmap & 0xf0) && priv->tx_paths > 1) {
+		/* path B OK */
+		for (i = 4; i < 8; i++)
+			result[3][i] = result[c1][i];
+	}
+
+	return false;
+}
+
+bool rtl8xxxu_gen2_simularity_compare(struct rtl8xxxu_priv *priv,
+				      int result[][8], int c1, int c2)
+{
+	u32 i, j, diff, simubitmap, bound = 0;
+	int candidate[2] = {-1, -1};	/* for path A and path B */
+	int tmp1, tmp2;
+	bool retval = true;
+
+	if (priv->tx_paths > 1)
+		bound = 8;
+	else
+		bound = 4;
+
+	simubitmap = 0;
+
+	for (i = 0; i < bound; i++) {
+		if (i & 1) {
+			if ((result[c1][i] & 0x00000200))
+				tmp1 = result[c1][i] | 0xfffffc00;
+			else
+				tmp1 = result[c1][i];
+
+			if ((result[c2][i]& 0x00000200))
+				tmp2 = result[c2][i] | 0xfffffc00;
+			else
+				tmp2 = result[c2][i];
+		} else {
+			tmp1 = result[c1][i];
+			tmp2 = result[c2][i];
+		}
+
+		diff = (tmp1 > tmp2) ? (tmp1 - tmp2) : (tmp2 - tmp1);
+
+		if (diff > MAX_TOLERANCE) {
+			if ((i == 2 || i == 6) && !simubitmap) {
+				if (result[c1][i] + result[c1][i + 1] == 0)
+					candidate[(i / 4)] = c2;
+				else if (result[c2][i] + result[c2][i + 1] == 0)
+					candidate[(i / 4)] = c1;
+				else
+					simubitmap = simubitmap | (1 << i);
+			} else {
+				simubitmap = simubitmap | (1 << i);
+			}
+		}
+	}
+
+	if (simubitmap == 0) {
+		for (i = 0; i < (bound / 4); i++) {
+			if (candidate[i] >= 0) {
+				for (j = i * 4; j < (i + 1) * 4 - 2; j++)
+					result[3][j] = result[candidate[i]][j];
+				retval = false;
+			}
+		}
+		return retval;
+	} else {
+		if (!(simubitmap & 0x03)) {
+			/* path A TX OK */
+			for (i = 0; i < 2; i++)
+				result[3][i] = result[c1][i];
+		}
+
+		if (!(simubitmap & 0x0c)) {
+			/* path A RX OK */
+			for (i = 2; i < 4; i++)
+				result[3][i] = result[c1][i];
+		}
+
+		if (!(simubitmap & 0x30) && priv->tx_paths > 1) {
+			/* path B TX OK */
+			for (i = 4; i < 6; i++)
+				result[3][i] = result[c1][i];
+		}
+
+		if (!(simubitmap & 0xc0) && priv->tx_paths > 1) {
+			/* path B RX OK */
+			for (i = 6; i < 8; i++)
+				result[3][i] = result[c1][i];
+		}
+	}
+
+	return false;
+}
+
+void
+rtl8xxxu_save_mac_regs(struct rtl8xxxu_priv *priv, const u32 *reg, u32 *backup)
+{
+	int i;
+
+	for (i = 0; i < (RTL8XXXU_MAC_REGS - 1); i++)
+		backup[i] = rtl8xxxu_read8(priv, reg[i]);
+
+	backup[i] = rtl8xxxu_read32(priv, reg[i]);
+}
+
+void rtl8xxxu_restore_mac_regs(struct rtl8xxxu_priv *priv,
+			       const u32 *reg, u32 *backup)
+{
+	int i;
+
+	for (i = 0; i < (RTL8XXXU_MAC_REGS - 1); i++)
+		rtl8xxxu_write8(priv, reg[i], backup[i]);
+
+	rtl8xxxu_write32(priv, reg[i], backup[i]);
+}
+
+void rtl8xxxu_save_regs(struct rtl8xxxu_priv *priv, const u32 *regs,
+			u32 *backup, int count)
+{
+	int i;
+
+	for (i = 0; i < count; i++)
+		backup[i] = rtl8xxxu_read32(priv, regs[i]);
+}
+
+void rtl8xxxu_restore_regs(struct rtl8xxxu_priv *priv, const u32 *regs,
+			   u32 *backup, int count)
+{
+	int i;
+
+	for (i = 0; i < count; i++)
+		rtl8xxxu_write32(priv, regs[i], backup[i]);
+}
+
+
+void rtl8xxxu_path_adda_on(struct rtl8xxxu_priv *priv, const u32 *regs,
+			   bool path_a_on)
+{
+	u32 path_on;
+	int i;
+
+	if (priv->tx_paths == 1) {
+		path_on = priv->fops->adda_1t_path_on;
+		rtl8xxxu_write32(priv, regs[0], priv->fops->adda_1t_init);
+	} else {
+		path_on = path_a_on ? priv->fops->adda_2t_path_on_a :
+			priv->fops->adda_2t_path_on_b;
+
+		rtl8xxxu_write32(priv, regs[0], path_on);
+	}
+
+	for (i = 1 ; i < RTL8XXXU_ADDA_REGS ; i++)
+		rtl8xxxu_write32(priv, regs[i], path_on);
+}
+
+void rtl8xxxu_mac_calibration(struct rtl8xxxu_priv *priv,
+			      const u32 *regs, u32 *backup)
+{
+	int i = 0;
+
+	rtl8xxxu_write8(priv, regs[i], 0x3f);
+
+	for (i = 1 ; i < (RTL8XXXU_MAC_REGS - 1); i++)
+		rtl8xxxu_write8(priv, regs[i], (u8)(backup[i] & ~BIT(3)));
+
+	rtl8xxxu_write8(priv, regs[i], (u8)(backup[i] & ~BIT(5)));
+}
+
+static int rtl8xxxu_iqk_path_a(struct rtl8xxxu_priv *priv)
+{
+	u32 reg_eac, reg_e94, reg_e9c, reg_ea4, val32;
+	int result = 0;
+
+	/* path-A IQK setting */
+	rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x10008c1f);
+	rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x10008c1f);
+	rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x82140102);
+
+	val32 = (priv->rf_paths > 1) ? 0x28160202 :
+		/*IS_81xxC_VENDOR_UMC_B_CUT(pHalData->VersionID)?0x28160202: */
+		0x28160502;
+	rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, val32);
+
+	/* path-B IQK setting */
+	if (priv->rf_paths > 1) {
+		rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x10008c22);
+		rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x10008c22);
+		rtl8xxxu_write32(priv, REG_TX_IQK_PI_B, 0x82140102);
+		rtl8xxxu_write32(priv, REG_RX_IQK_PI_B, 0x28160202);
+	}
+
+	/* LO calibration setting */
+	rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x001028d1);
+
+	/* One shot, path A LOK & IQK */
+	rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000);
+	rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000);
+
+	mdelay(1);
+
+	/* Check failed */
+	reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2);
+	reg_e94 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_A);
+	reg_e9c = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_A);
+	reg_ea4 = rtl8xxxu_read32(priv, REG_RX_POWER_BEFORE_IQK_A_2);
+
+	if (!(reg_eac & BIT(28)) &&
+	    ((reg_e94 & 0x03ff0000) != 0x01420000) &&
+	    ((reg_e9c & 0x03ff0000) != 0x00420000))
+		result |= 0x01;
+	else	/* If TX not OK, ignore RX */
+		goto out;
+
+	/* If TX is OK, check whether RX is OK */
+	if (!(reg_eac & BIT(27)) &&
+	    ((reg_ea4 & 0x03ff0000) != 0x01320000) &&
+	    ((reg_eac & 0x03ff0000) != 0x00360000))
+		result |= 0x02;
+	else
+		dev_warn(&priv->udev->dev, "%s: Path A RX IQK failed!\n",
+			 __func__);
+out:
+	return result;
+}
+
+static int rtl8xxxu_iqk_path_b(struct rtl8xxxu_priv *priv)
+{
+	u32 reg_eac, reg_eb4, reg_ebc, reg_ec4, reg_ecc;
+	int result = 0;
+
+	/* One shot, path B LOK & IQK */
+	rtl8xxxu_write32(priv, REG_IQK_AGC_CONT, 0x00000002);
+	rtl8xxxu_write32(priv, REG_IQK_AGC_CONT, 0x00000000);
+
+	mdelay(1);
+
+	/* Check failed */
+	reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2);
+	reg_eb4 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_B);
+	reg_ebc = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_B);
+	reg_ec4 = rtl8xxxu_read32(priv, REG_RX_POWER_BEFORE_IQK_B_2);
+	reg_ecc = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_B_2);
+
+	if (!(reg_eac & BIT(31)) &&
+	    ((reg_eb4 & 0x03ff0000) != 0x01420000) &&
+	    ((reg_ebc & 0x03ff0000) != 0x00420000))
+		result |= 0x01;
+	else
+		goto out;
+
+	if (!(reg_eac & BIT(30)) &&
+	    (((reg_ec4 & 0x03ff0000) >> 16) != 0x132) &&
+	    (((reg_ecc & 0x03ff0000) >> 16) != 0x36))
+		result |= 0x02;
+	else
+		dev_warn(&priv->udev->dev, "%s: Path B RX IQK failed!\n",
+			 __func__);
+out:
+	return result;
+}
+
+static void rtl8xxxu_phy_iqcalibrate(struct rtl8xxxu_priv *priv,
+				     int result[][8], int t)
+{
+	struct device *dev = &priv->udev->dev;
+	u32 i, val32;
+	int path_a_ok, path_b_ok;
+	int retry = 2;
+	static const u32 adda_regs[RTL8XXXU_ADDA_REGS] = {
+		REG_FPGA0_XCD_SWITCH_CTRL, REG_BLUETOOTH,
+		REG_RX_WAIT_CCA, REG_TX_CCK_RFON,
+		REG_TX_CCK_BBON, REG_TX_OFDM_RFON,
+		REG_TX_OFDM_BBON, REG_TX_TO_RX,
+		REG_TX_TO_TX, REG_RX_CCK,
+		REG_RX_OFDM, REG_RX_WAIT_RIFS,
+		REG_RX_TO_RX, REG_STANDBY,
+		REG_SLEEP, REG_PMPD_ANAEN
+	};
+	static const u32 iqk_mac_regs[RTL8XXXU_MAC_REGS] = {
+		REG_TXPAUSE, REG_BEACON_CTRL,
+		REG_BEACON_CTRL_1, REG_GPIO_MUXCFG
+	};
+	static const u32 iqk_bb_regs[RTL8XXXU_BB_REGS] = {
+		REG_OFDM0_TRX_PATH_ENABLE, REG_OFDM0_TR_MUX_PAR,
+		REG_FPGA0_XCD_RF_SW_CTRL, REG_CONFIG_ANT_A, REG_CONFIG_ANT_B,
+		REG_FPGA0_XAB_RF_SW_CTRL, REG_FPGA0_XA_RF_INT_OE,
+		REG_FPGA0_XB_RF_INT_OE, REG_FPGA0_RF_MODE
+	};
+
+	/*
+	 * Note: IQ calibration must be performed after loading
+	 *       PHY_REG.txt , and radio_a, radio_b.txt
+	 */
+
+	if (t == 0) {
+		/* Save ADDA parameters, turn Path A ADDA on */
+		rtl8xxxu_save_regs(priv, adda_regs, priv->adda_backup,
+				   RTL8XXXU_ADDA_REGS);
+		rtl8xxxu_save_mac_regs(priv, iqk_mac_regs, priv->mac_backup);
+		rtl8xxxu_save_regs(priv, iqk_bb_regs,
+				   priv->bb_backup, RTL8XXXU_BB_REGS);
+	}
+
+	rtl8xxxu_path_adda_on(priv, adda_regs, true);
+
+	if (t == 0) {
+		val32 = rtl8xxxu_read32(priv, REG_FPGA0_XA_HSSI_PARM1);
+		if (val32 & FPGA0_HSSI_PARM1_PI)
+			priv->pi_enabled = 1;
+	}
+
+	if (!priv->pi_enabled) {
+		/* Switch BB to PI mode to do IQ Calibration. */
+		rtl8xxxu_write32(priv, REG_FPGA0_XA_HSSI_PARM1, 0x01000100);
+		rtl8xxxu_write32(priv, REG_FPGA0_XB_HSSI_PARM1, 0x01000100);
+	}
+
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE);
+	val32 &= ~FPGA_RF_MODE_CCK;
+	rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32);
+
+	rtl8xxxu_write32(priv, REG_OFDM0_TRX_PATH_ENABLE, 0x03a05600);
+	rtl8xxxu_write32(priv, REG_OFDM0_TR_MUX_PAR, 0x000800e4);
+	rtl8xxxu_write32(priv, REG_FPGA0_XCD_RF_SW_CTRL, 0x22204000);
+
+	if (!priv->no_pape) {
+		val32 = rtl8xxxu_read32(priv, REG_FPGA0_XAB_RF_SW_CTRL);
+		val32 |= (FPGA0_RF_PAPE |
+			  (FPGA0_RF_PAPE << FPGA0_RF_BD_CTRL_SHIFT));
+		rtl8xxxu_write32(priv, REG_FPGA0_XAB_RF_SW_CTRL, val32);
+	}
+
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_XA_RF_INT_OE);
+	val32 &= ~BIT(10);
+	rtl8xxxu_write32(priv, REG_FPGA0_XA_RF_INT_OE, val32);
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_XB_RF_INT_OE);
+	val32 &= ~BIT(10);
+	rtl8xxxu_write32(priv, REG_FPGA0_XB_RF_INT_OE, val32);
+
+	if (priv->tx_paths > 1) {
+		rtl8xxxu_write32(priv, REG_FPGA0_XA_LSSI_PARM, 0x00010000);
+		rtl8xxxu_write32(priv, REG_FPGA0_XB_LSSI_PARM, 0x00010000);
+	}
+
+	/* MAC settings */
+	rtl8xxxu_mac_calibration(priv, iqk_mac_regs, priv->mac_backup);
+
+	/* Page B init */
+	rtl8xxxu_write32(priv, REG_CONFIG_ANT_A, 0x00080000);
+
+	if (priv->tx_paths > 1)
+		rtl8xxxu_write32(priv, REG_CONFIG_ANT_B, 0x00080000);
+
+	/* IQ calibration setting */
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000);
+	rtl8xxxu_write32(priv, REG_TX_IQK, 0x01007c00);
+	rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800);
+
+	for (i = 0; i < retry; i++) {
+		path_a_ok = rtl8xxxu_iqk_path_a(priv);
+		if (path_a_ok == 0x03) {
+			val32 = rtl8xxxu_read32(priv,
+						REG_TX_POWER_BEFORE_IQK_A);
+			result[t][0] = (val32 >> 16) & 0x3ff;
+			val32 = rtl8xxxu_read32(priv,
+						REG_TX_POWER_AFTER_IQK_A);
+			result[t][1] = (val32 >> 16) & 0x3ff;
+			val32 = rtl8xxxu_read32(priv,
+						REG_RX_POWER_BEFORE_IQK_A_2);
+			result[t][2] = (val32 >> 16) & 0x3ff;
+			val32 = rtl8xxxu_read32(priv,
+						REG_RX_POWER_AFTER_IQK_A_2);
+			result[t][3] = (val32 >> 16) & 0x3ff;
+			break;
+		} else if (i == (retry - 1) && path_a_ok == 0x01) {
+			/* TX IQK OK */
+			dev_dbg(dev, "%s: Path A IQK Only Tx Success!!\n",
+				__func__);
+
+			val32 = rtl8xxxu_read32(priv,
+						REG_TX_POWER_BEFORE_IQK_A);
+			result[t][0] = (val32 >> 16) & 0x3ff;
+			val32 = rtl8xxxu_read32(priv,
+						REG_TX_POWER_AFTER_IQK_A);
+			result[t][1] = (val32 >> 16) & 0x3ff;
+		}
+	}
+
+	if (!path_a_ok)
+		dev_dbg(dev, "%s: Path A IQK failed!\n", __func__);
+
+	if (priv->tx_paths > 1) {
+		/*
+		 * Path A into standby
+		 */
+		rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x0);
+		rtl8xxxu_write32(priv, REG_FPGA0_XA_LSSI_PARM, 0x00010000);
+		rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000);
+
+		/* Turn Path B ADDA on */
+		rtl8xxxu_path_adda_on(priv, adda_regs, false);
+
+		for (i = 0; i < retry; i++) {
+			path_b_ok = rtl8xxxu_iqk_path_b(priv);
+			if (path_b_ok == 0x03) {
+				val32 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_B);
+				result[t][4] = (val32 >> 16) & 0x3ff;
+				val32 = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_B);
+				result[t][5] = (val32 >> 16) & 0x3ff;
+				val32 = rtl8xxxu_read32(priv, REG_RX_POWER_BEFORE_IQK_B_2);
+				result[t][6] = (val32 >> 16) & 0x3ff;
+				val32 = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_B_2);
+				result[t][7] = (val32 >> 16) & 0x3ff;
+				break;
+			} else if (i == (retry - 1) && path_b_ok == 0x01) {
+				/* TX IQK OK */
+				val32 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_B);
+				result[t][4] = (val32 >> 16) & 0x3ff;
+				val32 = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_B);
+				result[t][5] = (val32 >> 16) & 0x3ff;
+			}
+		}
+
+		if (!path_b_ok)
+			dev_dbg(dev, "%s: Path B IQK failed!\n", __func__);
+	}
+
+	/* Back to BB mode, load original value */
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0);
+
+	if (t) {
+		if (!priv->pi_enabled) {
+			/*
+			 * Switch back BB to SI mode after finishing
+			 * IQ Calibration
+			 */
+			val32 = 0x01000000;
+			rtl8xxxu_write32(priv, REG_FPGA0_XA_HSSI_PARM1, val32);
+			rtl8xxxu_write32(priv, REG_FPGA0_XB_HSSI_PARM1, val32);
+		}
+
+		/* Reload ADDA power saving parameters */
+		rtl8xxxu_restore_regs(priv, adda_regs, priv->adda_backup,
+				      RTL8XXXU_ADDA_REGS);
+
+		/* Reload MAC parameters */
+		rtl8xxxu_restore_mac_regs(priv, iqk_mac_regs, priv->mac_backup);
+
+		/* Reload BB parameters */
+		rtl8xxxu_restore_regs(priv, iqk_bb_regs,
+				      priv->bb_backup, RTL8XXXU_BB_REGS);
+
+		/* Restore RX initial gain */
+		rtl8xxxu_write32(priv, REG_FPGA0_XA_LSSI_PARM, 0x00032ed3);
+
+		if (priv->tx_paths > 1) {
+			rtl8xxxu_write32(priv, REG_FPGA0_XB_LSSI_PARM,
+					 0x00032ed3);
+		}
+
+		/* Load 0xe30 IQC default value */
+		rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x01008c00);
+		rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x01008c00);
+	}
+}
+
+void rtl8xxxu_gen2_prepare_calibrate(struct rtl8xxxu_priv *priv, u8 start)
+{
+	struct h2c_cmd h2c;
+
+	memset(&h2c, 0, sizeof(struct h2c_cmd));
+	h2c.bt_wlan_calibration.cmd = H2C_8723B_BT_WLAN_CALIBRATION;
+	h2c.bt_wlan_calibration.data = start;
+
+	rtl8xxxu_gen2_h2c_cmd(priv, &h2c, sizeof(h2c.bt_wlan_calibration));
+}
+
+void rtl8xxxu_gen1_phy_iq_calibrate(struct rtl8xxxu_priv *priv)
+{
+	struct device *dev = &priv->udev->dev;
+	int result[4][8];	/* last is final result */
+	int i, candidate;
+	bool path_a_ok, path_b_ok;
+	u32 reg_e94, reg_e9c, reg_ea4, reg_eac;
+	u32 reg_eb4, reg_ebc, reg_ec4, reg_ecc;
+	s32 reg_tmp = 0;
+	bool simu;
+
+	memset(result, 0, sizeof(result));
+	candidate = -1;
+
+	path_a_ok = false;
+	path_b_ok = false;
+
+	rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE);
+
+	for (i = 0; i < 3; i++) {
+		rtl8xxxu_phy_iqcalibrate(priv, result, i);
+
+		if (i == 1) {
+			simu = rtl8xxxu_simularity_compare(priv, result, 0, 1);
+			if (simu) {
+				candidate = 0;
+				break;
+			}
+		}
+
+		if (i == 2) {
+			simu = rtl8xxxu_simularity_compare(priv, result, 0, 2);
+			if (simu) {
+				candidate = 0;
+				break;
+			}
+
+			simu = rtl8xxxu_simularity_compare(priv, result, 1, 2);
+			if (simu) {
+				candidate = 1;
+			} else {
+				for (i = 0; i < 8; i++)
+					reg_tmp += result[3][i];
+
+				if (reg_tmp)
+					candidate = 3;
+				else
+					candidate = -1;
+			}
+		}
+	}
+
+	for (i = 0; i < 4; i++) {
+		reg_e94 = result[i][0];
+		reg_e9c = result[i][1];
+		reg_ea4 = result[i][2];
+		reg_eac = result[i][3];
+		reg_eb4 = result[i][4];
+		reg_ebc = result[i][5];
+		reg_ec4 = result[i][6];
+		reg_ecc = result[i][7];
+	}
+
+	if (candidate >= 0) {
+		reg_e94 = result[candidate][0];
+		priv->rege94 =  reg_e94;
+		reg_e9c = result[candidate][1];
+		priv->rege9c = reg_e9c;
+		reg_ea4 = result[candidate][2];
+		reg_eac = result[candidate][3];
+		reg_eb4 = result[candidate][4];
+		priv->regeb4 = reg_eb4;
+		reg_ebc = result[candidate][5];
+		priv->regebc = reg_ebc;
+		reg_ec4 = result[candidate][6];
+		reg_ecc = result[candidate][7];
+		dev_dbg(dev, "%s: candidate is %x\n", __func__, candidate);
+		dev_dbg(dev,
+			"%s: e94 =%x e9c=%x ea4=%x eac=%x eb4=%x ebc=%x ec4=%x ecc=%x\n",
+			__func__, reg_e94, reg_e9c,
+			reg_ea4, reg_eac, reg_eb4, reg_ebc, reg_ec4, reg_ecc);
+		path_a_ok = true;
+		path_b_ok = true;
+	} else {
+		reg_e94 = reg_eb4 = priv->rege94 = priv->regeb4 = 0x100;
+		reg_e9c = reg_ebc = priv->rege9c = priv->regebc = 0x0;
+	}
+
+	if (reg_e94 && candidate >= 0)
+		rtl8xxxu_fill_iqk_matrix_a(priv, path_a_ok, result,
+					   candidate, (reg_ea4 == 0));
+
+	if (priv->tx_paths > 1 && reg_eb4)
+		rtl8xxxu_fill_iqk_matrix_b(priv, path_b_ok, result,
+					   candidate, (reg_ec4 == 0));
+
+	rtl8xxxu_save_regs(priv, rtl8xxxu_iqk_phy_iq_bb_reg,
+			   priv->bb_recovery_backup, RTL8XXXU_BB_REGS);
+}
+
+void rtl8723a_phy_lc_calibrate(struct rtl8xxxu_priv *priv)
+{
+	u32 val32;
+	u32 rf_amode, rf_bmode = 0, lstf;
+
+	/* Check continuous TX and Packet TX */
+	lstf = rtl8xxxu_read32(priv, REG_OFDM1_LSTF);
+
+	if (lstf & OFDM_LSTF_MASK) {
+		/* Disable all continuous TX */
+		val32 = lstf & ~OFDM_LSTF_MASK;
+		rtl8xxxu_write32(priv, REG_OFDM1_LSTF, val32);
+
+		/* Read original RF mode Path A */
+		rf_amode = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_AC);
+
+		/* Set RF mode to standby Path A */
+		rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_AC,
+				     (rf_amode & 0x8ffff) | 0x10000);
+
+		/* Path-B */
+		if (priv->tx_paths > 1) {
+			rf_bmode = rtl8xxxu_read_rfreg(priv, RF_B,
+						       RF6052_REG_AC);
+
+			rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_AC,
+					     (rf_bmode & 0x8ffff) | 0x10000);
+		}
+	} else {
+		/*  Deal with Packet TX case */
+		/*  block all queues */
+		rtl8xxxu_write8(priv, REG_TXPAUSE, 0xff);
+	}
+
+	/* Start LC calibration */
+	if (priv->fops->has_s0s1)
+		rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_S0S1, 0xdfbe0);
+	val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_MODE_AG);
+	val32 |= 0x08000;
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_MODE_AG, val32);
+
+	msleep(100);
+
+	if (priv->fops->has_s0s1)
+		rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_S0S1, 0xdffe0);
+
+	/* Restore original parameters */
+	if (lstf & OFDM_LSTF_MASK) {
+		/* Path-A */
+		rtl8xxxu_write32(priv, REG_OFDM1_LSTF, lstf);
+		rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_AC, rf_amode);
+
+		/* Path-B */
+		if (priv->tx_paths > 1)
+			rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_AC,
+					     rf_bmode);
+	} else /*  Deal with Packet TX case */
+		rtl8xxxu_write8(priv, REG_TXPAUSE, 0x00);
+}
+
+static int rtl8xxxu_set_mac(struct rtl8xxxu_priv *priv)
+{
+	int i;
+	u16 reg;
+
+	reg = REG_MACID;
+
+	for (i = 0; i < ETH_ALEN; i++)
+		rtl8xxxu_write8(priv, reg + i, priv->mac_addr[i]);
+
+	return 0;
+}
+
+static int rtl8xxxu_set_bssid(struct rtl8xxxu_priv *priv, const u8 *bssid)
+{
+	int i;
+	u16 reg;
+
+	dev_dbg(&priv->udev->dev, "%s: (%pM)\n", __func__, bssid);
+
+	reg = REG_BSSID;
+
+	for (i = 0; i < ETH_ALEN; i++)
+		rtl8xxxu_write8(priv, reg + i, bssid[i]);
+
+	return 0;
+}
+
+static void
+rtl8xxxu_set_ampdu_factor(struct rtl8xxxu_priv *priv, u8 ampdu_factor)
+{
+	u8 vals[4] = { 0x41, 0xa8, 0x72, 0xb9 };
+	u8 max_agg = 0xf;
+	int i;
+
+	ampdu_factor = 1 << (ampdu_factor + 2);
+	if (ampdu_factor > max_agg)
+		ampdu_factor = max_agg;
+
+	for (i = 0; i < 4; i++) {
+		if ((vals[i] & 0xf0) > (ampdu_factor << 4))
+			vals[i] = (vals[i] & 0x0f) | (ampdu_factor << 4);
+
+		if ((vals[i] & 0x0f) > ampdu_factor)
+			vals[i] = (vals[i] & 0xf0) | ampdu_factor;
+
+		rtl8xxxu_write8(priv, REG_AGGLEN_LMT + i, vals[i]);
+	}
+}
+
+static void rtl8xxxu_set_ampdu_min_space(struct rtl8xxxu_priv *priv, u8 density)
+{
+	u8 val8;
+
+	val8 = rtl8xxxu_read8(priv, REG_AMPDU_MIN_SPACE);
+	val8 &= 0xf8;
+	val8 |= density;
+	rtl8xxxu_write8(priv, REG_AMPDU_MIN_SPACE, val8);
+}
+
+static int rtl8xxxu_active_to_emu(struct rtl8xxxu_priv *priv)
+{
+	u8 val8;
+	int count, ret = 0;
+
+	/* Start of rtl8723AU_card_enable_flow */
+	/* Act to Cardemu sequence*/
+	/* Turn off RF */
+	rtl8xxxu_write8(priv, REG_RF_CTRL, 0);
+
+	/* 0x004E[7] = 0, switch DPDT_SEL_P output from register 0x0065[2] */
+	val8 = rtl8xxxu_read8(priv, REG_LEDCFG2);
+	val8 &= ~LEDCFG2_DPDT_SELECT;
+	rtl8xxxu_write8(priv, REG_LEDCFG2, val8);
+
+	/* 0x0005[1] = 1 turn off MAC by HW state machine*/
+	val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
+	val8 |= BIT(1);
+	rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8);
+
+	for (count = RTL8XXXU_MAX_REG_POLL; count; count--) {
+		val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
+		if ((val8 & BIT(1)) == 0)
+			break;
+		udelay(10);
+	}
+
+	if (!count) {
+		dev_warn(&priv->udev->dev, "%s: Disabling MAC timed out\n",
+			 __func__);
+		ret = -EBUSY;
+		goto exit;
+	}
+
+	/* 0x0000[5] = 1 analog Ips to digital, 1:isolation */
+	val8 = rtl8xxxu_read8(priv, REG_SYS_ISO_CTRL);
+	val8 |= SYS_ISO_ANALOG_IPS;
+	rtl8xxxu_write8(priv, REG_SYS_ISO_CTRL, val8);
+
+	/* 0x0020[0] = 0 disable LDOA12 MACRO block*/
+	val8 = rtl8xxxu_read8(priv, REG_LDOA15_CTRL);
+	val8 &= ~LDOA15_ENABLE;
+	rtl8xxxu_write8(priv, REG_LDOA15_CTRL, val8);
+
+exit:
+	return ret;
+}
+
+int rtl8xxxu_active_to_lps(struct rtl8xxxu_priv *priv)
+{
+	u8 val8;
+	u8 val32;
+	int count, ret = 0;
+
+	rtl8xxxu_write8(priv, REG_TXPAUSE, 0xff);
+
+	/*
+	 * Poll - wait for RX packet to complete
+	 */
+	for (count = RTL8XXXU_MAX_REG_POLL; count; count--) {
+		val32 = rtl8xxxu_read32(priv, 0x5f8);
+		if (!val32)
+			break;
+		udelay(10);
+	}
+
+	if (!count) {
+		dev_warn(&priv->udev->dev,
+			 "%s: RX poll timed out (0x05f8)\n", __func__);
+		ret = -EBUSY;
+		goto exit;
+	}
+
+	/* Disable CCK and OFDM, clock gated */
+	val8 = rtl8xxxu_read8(priv, REG_SYS_FUNC);
+	val8 &= ~SYS_FUNC_BBRSTB;
+	rtl8xxxu_write8(priv, REG_SYS_FUNC, val8);
+
+	udelay(2);
+
+	/* Reset baseband */
+	val8 = rtl8xxxu_read8(priv, REG_SYS_FUNC);
+	val8 &= ~SYS_FUNC_BB_GLB_RSTN;
+	rtl8xxxu_write8(priv, REG_SYS_FUNC, val8);
+
+	/* Reset MAC TRX */
+	val8 = rtl8xxxu_read8(priv, REG_CR);
+	val8 = CR_HCI_TXDMA_ENABLE | CR_HCI_RXDMA_ENABLE;
+	rtl8xxxu_write8(priv, REG_CR, val8);
+
+	/* Reset MAC TRX */
+	val8 = rtl8xxxu_read8(priv, REG_CR + 1);
+	val8 &= ~BIT(1); /* CR_SECURITY_ENABLE */
+	rtl8xxxu_write8(priv, REG_CR + 1, val8);
+
+	/* Respond TX OK to scheduler */
+	val8 = rtl8xxxu_read8(priv, REG_DUAL_TSF_RST);
+	val8 |= DUAL_TSF_TX_OK;
+	rtl8xxxu_write8(priv, REG_DUAL_TSF_RST, val8);
+
+exit:
+	return ret;
+}
+
+void rtl8xxxu_disabled_to_emu(struct rtl8xxxu_priv *priv)
+{
+	u8 val8;
+
+	/* Clear suspend enable and power down enable*/
+	val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
+	val8 &= ~(BIT(3) | BIT(7));
+	rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8);
+
+	/* 0x48[16] = 0 to disable GPIO9 as EXT WAKEUP*/
+	val8 = rtl8xxxu_read8(priv, REG_GPIO_INTM + 2);
+	val8 &= ~BIT(0);
+	rtl8xxxu_write8(priv, REG_GPIO_INTM + 2, val8);
+
+	/* 0x04[12:11] = 11 enable WL suspend*/
+	val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
+	val8 &= ~(BIT(3) | BIT(4));
+	rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8);
+}
+
+static int rtl8xxxu_emu_to_disabled(struct rtl8xxxu_priv *priv)
+{
+	u8 val8;
+
+	/* 0x0007[7:0] = 0x20 SOP option to disable BG/MB */
+	rtl8xxxu_write8(priv, REG_APS_FSMCO + 3, 0x20);
+
+	/* 0x04[12:11] = 01 enable WL suspend */
+	val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
+	val8 &= ~BIT(4);
+	val8 |= BIT(3);
+	rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8);
+
+	val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
+	val8 |= BIT(7);
+	rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8);
+
+	/* 0x48[16] = 1 to enable GPIO9 as EXT wakeup */
+	val8 = rtl8xxxu_read8(priv, REG_GPIO_INTM + 2);
+	val8 |= BIT(0);
+	rtl8xxxu_write8(priv, REG_GPIO_INTM + 2, val8);
+
+	return 0;
+}
+
+int rtl8xxxu_flush_fifo(struct rtl8xxxu_priv *priv)
+{
+	struct device *dev = &priv->udev->dev;
+	u32 val32;
+	int retry, retval;
+
+	rtl8xxxu_write8(priv, REG_TXPAUSE, 0xff);
+
+	val32 = rtl8xxxu_read32(priv, REG_RXPKT_NUM);
+	val32 |= RXPKT_NUM_RW_RELEASE_EN;
+	rtl8xxxu_write32(priv, REG_RXPKT_NUM, val32);
+
+	retry = 100;
+	retval = -EBUSY;
+
+	do {
+		val32 = rtl8xxxu_read32(priv, REG_RXPKT_NUM);
+		if (val32 & RXPKT_NUM_RXDMA_IDLE) {
+			retval = 0;
+			break;
+		}
+	} while (retry--);
+
+	rtl8xxxu_write16(priv, REG_RQPN_NPQ, 0);
+	rtl8xxxu_write32(priv, REG_RQPN, 0x80000000);
+	mdelay(2);
+
+	if (!retry)
+		dev_warn(dev, "Failed to flush FIFO\n");
+
+	return retval;
+}
+
+void rtl8xxxu_gen1_usb_quirks(struct rtl8xxxu_priv *priv)
+{
+	/* Fix USB interface interference issue */
+	rtl8xxxu_write8(priv, 0xfe40, 0xe0);
+	rtl8xxxu_write8(priv, 0xfe41, 0x8d);
+	rtl8xxxu_write8(priv, 0xfe42, 0x80);
+	/*
+	 * This sets TXDMA_OFFSET_DROP_DATA_EN (bit 9) as well as bits
+	 * 8 and 5, for which I have found no documentation.
+	 */
+	rtl8xxxu_write32(priv, REG_TXDMA_OFFSET_CHK, 0xfd0320);
+
+	/*
+	 * Solve too many protocol error on USB bus.
+	 * Can't do this for 8188/8192 UMC A cut parts
+	 */
+	if (!(!priv->chip_cut && priv->vendor_umc)) {
+		rtl8xxxu_write8(priv, 0xfe40, 0xe6);
+		rtl8xxxu_write8(priv, 0xfe41, 0x94);
+		rtl8xxxu_write8(priv, 0xfe42, 0x80);
+
+		rtl8xxxu_write8(priv, 0xfe40, 0xe0);
+		rtl8xxxu_write8(priv, 0xfe41, 0x19);
+		rtl8xxxu_write8(priv, 0xfe42, 0x80);
+
+		rtl8xxxu_write8(priv, 0xfe40, 0xe5);
+		rtl8xxxu_write8(priv, 0xfe41, 0x91);
+		rtl8xxxu_write8(priv, 0xfe42, 0x80);
+
+		rtl8xxxu_write8(priv, 0xfe40, 0xe2);
+		rtl8xxxu_write8(priv, 0xfe41, 0x81);
+		rtl8xxxu_write8(priv, 0xfe42, 0x80);
+	}
+}
+
+void rtl8xxxu_gen2_usb_quirks(struct rtl8xxxu_priv *priv)
+{
+	u32 val32;
+
+	val32 = rtl8xxxu_read32(priv, REG_TXDMA_OFFSET_CHK);
+	val32 |= TXDMA_OFFSET_DROP_DATA_EN;
+	rtl8xxxu_write32(priv, REG_TXDMA_OFFSET_CHK, val32);
+}
+
+void rtl8xxxu_power_off(struct rtl8xxxu_priv *priv)
+{
+	u8 val8;
+	u16 val16;
+	u32 val32;
+
+	/*
+	 * Workaround for 8188RU LNA power leakage problem.
+	 */
+	if (priv->rtl_chip == RTL8188R) {
+		val32 = rtl8xxxu_read32(priv, REG_FPGA0_XCD_RF_PARM);
+		val32 |= BIT(1);
+		rtl8xxxu_write32(priv, REG_FPGA0_XCD_RF_PARM, val32);
+	}
+
+	rtl8xxxu_flush_fifo(priv);
+
+	rtl8xxxu_active_to_lps(priv);
+
+	/* Turn off RF */
+	rtl8xxxu_write8(priv, REG_RF_CTRL, 0x00);
+
+	/* Reset Firmware if running in RAM */
+	if (rtl8xxxu_read8(priv, REG_MCU_FW_DL) & MCU_FW_RAM_SEL)
+		rtl8xxxu_firmware_self_reset(priv);
+
+	/* Reset MCU */
+	val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC);
+	val16 &= ~SYS_FUNC_CPU_ENABLE;
+	rtl8xxxu_write16(priv, REG_SYS_FUNC, val16);
+
+	/* Reset MCU ready status */
+	rtl8xxxu_write8(priv, REG_MCU_FW_DL, 0x00);
+
+	rtl8xxxu_active_to_emu(priv);
+	rtl8xxxu_emu_to_disabled(priv);
+
+	/* Reset MCU IO Wrapper */
+	val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL + 1);
+	val8 &= ~BIT(0);
+	rtl8xxxu_write8(priv, REG_RSV_CTRL + 1, val8);
+
+	val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL + 1);
+	val8 |= BIT(0);
+	rtl8xxxu_write8(priv, REG_RSV_CTRL + 1, val8);
+
+	/* RSV_CTRL 0x1C[7:0] = 0x0e  lock ISO/CLK/Power control register */
+	rtl8xxxu_write8(priv, REG_RSV_CTRL, 0x0e);
+}
+
+void rtl8723bu_set_ps_tdma(struct rtl8xxxu_priv *priv,
+			   u8 arg1, u8 arg2, u8 arg3, u8 arg4, u8 arg5)
+{
+	struct h2c_cmd h2c;
+
+	memset(&h2c, 0, sizeof(struct h2c_cmd));
+	h2c.b_type_dma.cmd = H2C_8723B_B_TYPE_TDMA;
+	h2c.b_type_dma.data1 = arg1;
+	h2c.b_type_dma.data2 = arg2;
+	h2c.b_type_dma.data3 = arg3;
+	h2c.b_type_dma.data4 = arg4;
+	h2c.b_type_dma.data5 = arg5;
+	rtl8xxxu_gen2_h2c_cmd(priv, &h2c, sizeof(h2c.b_type_dma));
+}
+
+void rtl8xxxu_gen2_disable_rf(struct rtl8xxxu_priv *priv)
+{
+	u32 val32;
+
+	val32 = rtl8xxxu_read32(priv, REG_RX_WAIT_CCA);
+	val32 &= ~(BIT(22) | BIT(23));
+	rtl8xxxu_write32(priv, REG_RX_WAIT_CCA, val32);
+}
+
+static void rtl8xxxu_init_queue_reserved_page(struct rtl8xxxu_priv *priv)
+{
+	struct rtl8xxxu_fileops *fops = priv->fops;
+	u32 hq, lq, nq, eq, pubq;
+	u32 val32;
+
+	hq = 0;
+	lq = 0;
+	nq = 0;
+	eq = 0;
+	pubq = 0;
+
+	if (priv->ep_tx_high_queue)
+		hq = fops->page_num_hi;
+	if (priv->ep_tx_low_queue)
+		lq = fops->page_num_lo;
+	if (priv->ep_tx_normal_queue)
+		nq = fops->page_num_norm;
+
+	val32 = (nq << RQPN_NPQ_SHIFT) | (eq << RQPN_EPQ_SHIFT);
+	rtl8xxxu_write32(priv, REG_RQPN_NPQ, val32);
+
+	pubq = fops->total_page_num - hq - lq - nq - 1;
+
+	val32 = RQPN_LOAD;
+	val32 |= (hq << RQPN_HI_PQ_SHIFT);
+	val32 |= (lq << RQPN_LO_PQ_SHIFT);
+	val32 |= (pubq << RQPN_PUB_PQ_SHIFT);
+
+	rtl8xxxu_write32(priv, REG_RQPN, val32);
+}
+
+void rtl8xxxu_init_burst(struct rtl8xxxu_priv *priv)
+{
+	u8 val8;
+
+	/*
+	 * For USB high speed set 512B packets
+	 */
+	val8 = rtl8xxxu_read8(priv, REG_RXDMA_PRO_8723B);
+	u8p_replace_bits(&val8, 1, RXDMA_PRO_DMA_BURST_SIZE);
+	u8p_replace_bits(&val8, 3, RXDMA_PRO_DMA_BURST_CNT);
+	val8 |= RXDMA_PRO_DMA_MODE;
+	rtl8xxxu_write8(priv, REG_RXDMA_PRO_8723B, val8);
+
+	/*
+	 * Enable single packet AMPDU
+	 */
+	val8 = rtl8xxxu_read8(priv, REG_HT_SINGLE_AMPDU_8723B);
+	val8 |= HT_SINGLE_AMPDU_ENABLE;
+	rtl8xxxu_write8(priv, REG_HT_SINGLE_AMPDU_8723B, val8);
+
+	rtl8xxxu_write16(priv, REG_MAX_AGGR_NUM, priv->fops->max_aggr_num);
+	rtl8xxxu_write8(priv, REG_AMPDU_MAX_TIME_8723B,
+			priv->fops->ampdu_max_time);
+	rtl8xxxu_write32(priv, REG_AGGLEN_LMT, 0xffffffff);
+	rtl8xxxu_write8(priv, REG_RX_PKT_LIMIT, 0x18);
+	rtl8xxxu_write8(priv, REG_PIFS, 0x00);
+	if (priv->rtl_chip == RTL8188F || priv->rtl_chip == RTL8710B ||
+	    priv->rtl_chip == RTL8192F) {
+		rtl8xxxu_write8(priv, REG_FWHW_TXQ_CTRL, FWHW_TXQ_CTRL_AMPDU_RETRY);
+		rtl8xxxu_write32(priv, REG_FAST_EDCA_CTRL, 0x03086666);
+	}
+	rtl8xxxu_write8(priv, REG_USTIME_TSF_8723B, priv->fops->ustime_tsf_edca);
+	rtl8xxxu_write8(priv, REG_USTIME_EDCA, priv->fops->ustime_tsf_edca);
+
+	/* to prevent mac is reseted by bus. */
+	val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL);
+	val8 |= RSV_CTRL_WLOCK_1C | RSV_CTRL_DIS_PRST;
+	rtl8xxxu_write8(priv, REG_RSV_CTRL, val8);
+}
+
+static u8 rtl8xxxu_acquire_macid(struct rtl8xxxu_priv *priv)
+{
+	u8 macid;
+
+	macid = find_first_zero_bit(priv->mac_id_map, RTL8XXXU_MAX_MAC_ID_NUM);
+	if (macid < RTL8XXXU_MAX_MAC_ID_NUM)
+		set_bit(macid, priv->mac_id_map);
+
+	return macid;
+}
+
+static void rtl8xxxu_release_macid(struct rtl8xxxu_priv *priv, u8 macid)
+{
+	clear_bit(macid, priv->mac_id_map);
+}
+
+static inline u8 rtl8xxxu_get_macid(struct rtl8xxxu_priv *priv,
+				    struct ieee80211_sta *sta)
+{
+	struct rtl8xxxu_sta_info *sta_info;
+
+	if (!priv->vif || priv->vif->type == NL80211_IFTYPE_STATION || !sta)
+		return 0;
+
+	sta_info = (struct rtl8xxxu_sta_info *)sta->drv_priv;
+	return sta_info->macid;
+}
+
+static int rtl8xxxu_init_device(struct ieee80211_hw *hw)
+{
+	struct rtl8xxxu_priv *priv = hw->priv;
+	struct device *dev = &priv->udev->dev;
+	struct rtl8xxxu_fileops *fops = priv->fops;
+	bool macpower;
+	int ret;
+	u8 val8;
+	u16 val16;
+	u32 val32;
+
+	/* Check if MAC is already powered on */
+	val8 = rtl8xxxu_read8(priv, REG_CR);
+	val16 = rtl8xxxu_read16(priv, REG_SYS_CLKR);
+
+	/*
+	 * Fix 92DU-VC S3 hang with the reason is that secondary mac is not
+	 * initialized. First MAC returns 0xea, second MAC returns 0x00
+	 */
+	if (val8 == 0xea || !(val16 & SYS_CLK_MAC_CLK_ENABLE))
+		macpower = false;
+	else
+		macpower = true;
+
+	if (fops->needs_full_init)
+		macpower = false;
+
+	ret = fops->power_on(priv);
+	if (ret < 0) {
+		dev_warn(dev, "%s: Failed power on\n", __func__);
+		goto exit;
+	}
+
+	if (!macpower)
+		rtl8xxxu_init_queue_reserved_page(priv);
+
+	ret = rtl8xxxu_init_queue_priority(priv);
+	dev_dbg(dev, "%s: init_queue_priority %i\n", __func__, ret);
+	if (ret)
+		goto exit;
+
+	/*
+	 * Set RX page boundary
+	 */
+	rtl8xxxu_write16(priv, REG_TRXFF_BNDY + 2, fops->trxff_boundary);
+
+	ret = rtl8xxxu_download_firmware(priv);
+	dev_dbg(dev, "%s: download_firmware %i\n", __func__, ret);
+	if (ret)
+		goto exit;
+	ret = rtl8xxxu_start_firmware(priv);
+	dev_dbg(dev, "%s: start_firmware %i\n", __func__, ret);
+	if (ret)
+		goto exit;
+
+	if (fops->phy_init_antenna_selection)
+		fops->phy_init_antenna_selection(priv);
+
+	ret = rtl8xxxu_init_mac(priv);
+
+	dev_dbg(dev, "%s: init_mac %i\n", __func__, ret);
+	if (ret)
+		goto exit;
+
+	ret = rtl8xxxu_init_phy_bb(priv);
+	dev_dbg(dev, "%s: init_phy_bb %i\n", __func__, ret);
+	if (ret)
+		goto exit;
+
+	ret = fops->init_phy_rf(priv);
+	if (ret)
+		goto exit;
+
+	/* Mac APLL Setting */
+	if (priv->rtl_chip == RTL8192F)
+		rtl8xxxu_write16_set(priv, REG_AFE_CTRL4, BIT(4) | BIT(15));
+
+	/* RFSW Control - clear bit 14 ?? */
+	if (priv->rtl_chip != RTL8723B && priv->rtl_chip != RTL8192E &&
+	    priv->rtl_chip != RTL8188E && priv->rtl_chip != RTL8710B &&
+	    priv->rtl_chip != RTL8192F)
+		rtl8xxxu_write32(priv, REG_FPGA0_TX_INFO, 0x00000003);
+
+	val32 = FPGA0_RF_TRSW | FPGA0_RF_TRSWB | FPGA0_RF_ANTSW |
+		FPGA0_RF_ANTSWB |
+		((FPGA0_RF_ANTSW | FPGA0_RF_ANTSWB) << FPGA0_RF_BD_CTRL_SHIFT);
+	if (!priv->no_pape) {
+		val32 |= (FPGA0_RF_PAPE |
+			  (FPGA0_RF_PAPE << FPGA0_RF_BD_CTRL_SHIFT));
+	}
+	rtl8xxxu_write32(priv, REG_FPGA0_XAB_RF_SW_CTRL, val32);
+
+	/* 0x860[6:5]= 00 - why? - this sets antenna B */
+	if (priv->rtl_chip != RTL8192E && priv->rtl_chip != RTL8188E &&
+	    priv->rtl_chip != RTL8710B && priv->rtl_chip != RTL8192F)
+		rtl8xxxu_write32(priv, REG_FPGA0_XA_RF_INT_OE, 0x66f60210);
+
+	if (!macpower) {
+		/*
+		 * Set TX buffer boundary
+		 */
+		val8 = fops->total_page_num + 1;
+
+		rtl8xxxu_write8(priv, REG_TXPKTBUF_BCNQ_BDNY, val8);
+		rtl8xxxu_write8(priv, REG_TXPKTBUF_MGQ_BDNY, val8);
+		rtl8xxxu_write8(priv, REG_TXPKTBUF_WMAC_LBK_BF_HD, val8);
+		rtl8xxxu_write8(priv, REG_TRXFF_BNDY, val8);
+		rtl8xxxu_write8(priv, REG_TDECTRL + 1, val8);
+	}
+
+	/*
+	 * The vendor drivers set PBP for all devices, except 8192e.
+	 * There is no explanation for this in any of the sources.
+	 */
+	val8 = (fops->pbp_rx << PBP_PAGE_SIZE_RX_SHIFT) |
+		(fops->pbp_tx << PBP_PAGE_SIZE_TX_SHIFT);
+	if (priv->rtl_chip != RTL8192E)
+		rtl8xxxu_write8(priv, REG_PBP, val8);
+
+	dev_dbg(dev, "%s: macpower %i\n", __func__, macpower);
+	if (!macpower) {
+		ret = fops->llt_init(priv);
+		if (ret) {
+			dev_warn(dev, "%s: LLT table init failed\n", __func__);
+			goto exit;
+		}
+
+		/*
+		 * Chip specific quirks
+		 */
+		fops->usb_quirks(priv);
+
+		/*
+		 * Enable TX report and TX report timer for 8723bu/8188eu/...
+		 */
+		if (fops->has_tx_report) {
+			/*
+			 * The RTL8188EU has two types of TX reports:
+			 * rpt_sel=1:
+			 *   One report for one frame. We can use this for frames
+			 *   with IEEE80211_TX_CTL_REQ_TX_STATUS.
+			 * rpt_sel=2:
+			 *   One report for many frames transmitted over a period
+			 *   of time. (This is what REG_TX_REPORT_TIME is for.) The
+			 *   report includes the number of frames transmitted
+			 *   successfully, and the number of unsuccessful
+			 *   transmissions. We use this for software rate control.
+			 *
+			 * Bit 0 of REG_TX_REPORT_CTRL is required for both types.
+			 * Bit 1 (TX_REPORT_CTRL_TIMER_ENABLE) is required for
+			 * type 2.
+			 */
+			val8 = rtl8xxxu_read8(priv, REG_TX_REPORT_CTRL);
+			if (priv->rtl_chip == RTL8188E)
+				val8 |= BIT(0);
+			val8 |= TX_REPORT_CTRL_TIMER_ENABLE;
+			rtl8xxxu_write8(priv, REG_TX_REPORT_CTRL, val8);
+			/* Set MAX RPT MACID */
+			rtl8xxxu_write8(priv, REG_TX_REPORT_CTRL + 1, 0x02);
+			/* TX report Timer. Unit: 32us */
+			rtl8xxxu_write16(priv, REG_TX_REPORT_TIME, 0xcdf0);
+
+			/* tmp ps ? */
+			val8 = rtl8xxxu_read8(priv, 0xa3);
+			val8 &= 0xf8;
+			rtl8xxxu_write8(priv, 0xa3, val8);
+		}
+
+		if (priv->rtl_chip == RTL8710B || priv->rtl_chip == RTL8192F)
+			rtl8xxxu_write8(priv, REG_EARLY_MODE_CONTROL_8710B, 0);
+	}
+
+	/*
+	 * Unit in 8 bytes.
+	 * Get Rx PHY status in order to report RSSI and others.
+	 */
+	rtl8xxxu_write8(priv, REG_RX_DRVINFO_SZ, 4);
+
+	if (priv->rtl_chip == RTL8192E) {
+		rtl8xxxu_write32(priv, REG_HIMR0, 0x00);
+		rtl8xxxu_write32(priv, REG_HIMR1, 0x00);
+	} else if (priv->rtl_chip == RTL8188F) {
+		rtl8xxxu_write32(priv, REG_HISR0, 0xffffffff);
+		rtl8xxxu_write32(priv, REG_HISR1, 0xffffffff);
+	} else if (priv->rtl_chip == RTL8188E) {
+		rtl8xxxu_write32(priv, REG_HISR0, 0xffffffff);
+		val32 = IMR0_PSTIMEOUT | IMR0_TBDER | IMR0_CPWM | IMR0_CPWM2;
+		rtl8xxxu_write32(priv, REG_HIMR0, val32);
+		val32 = IMR1_TXERR | IMR1_RXERR | IMR1_TXFOVW | IMR1_RXFOVW;
+		rtl8xxxu_write32(priv, REG_HIMR1, val32);
+		val8 = rtl8xxxu_read8(priv, REG_USB_SPECIAL_OPTION);
+		val8 |= USB_SPEC_INT_BULK_SELECT;
+		rtl8xxxu_write8(priv, REG_USB_SPECIAL_OPTION, val8);
+	} else if (priv->rtl_chip == RTL8710B) {
+		rtl8xxxu_write32(priv, REG_HIMR0_8710B, 0);
+	} else if (priv->rtl_chip != RTL8192F) {
+		/*
+		 * Enable all interrupts - not obvious USB needs to do this
+		 */
+		rtl8xxxu_write32(priv, REG_HISR, 0xffffffff);
+		rtl8xxxu_write32(priv, REG_HIMR, 0xffffffff);
+	}
+
+	rtl8xxxu_set_mac(priv);
+	rtl8xxxu_set_linktype(priv, NL80211_IFTYPE_STATION);
+
+	/*
+	 * Configure initial WMAC settings
+	 */
+	val32 = RCR_ACCEPT_PHYS_MATCH | RCR_ACCEPT_MCAST | RCR_ACCEPT_BCAST |
+		RCR_ACCEPT_MGMT_FRAME | RCR_HTC_LOC_CTRL |
+		RCR_APPEND_PHYSTAT | RCR_APPEND_ICV | RCR_APPEND_MIC;
+	rtl8xxxu_write32(priv, REG_RCR, val32);
+	priv->regrcr = val32;
+
+	if (fops->init_reg_rxfltmap) {
+		/* Accept all data frames */
+		rtl8xxxu_write16(priv, REG_RXFLTMAP2, 0xffff);
+
+		/*
+		 * Since ADF is removed from RCR, ps-poll will not be indicate to driver,
+		 * RxFilterMap should mask ps-poll to gurantee AP mode can rx ps-poll.
+		 */
+		rtl8xxxu_write16(priv, REG_RXFLTMAP1, 0x400);
+
+		/* Accept all management frames */
+		rtl8xxxu_write16(priv, REG_RXFLTMAP0, 0xffff);
+	} else {
+		/*
+		 * Accept all multicast
+		 */
+		rtl8xxxu_write32(priv, REG_MAR, 0xffffffff);
+		rtl8xxxu_write32(priv, REG_MAR + 4, 0xffffffff);
+	}
+
+	/*
+	 * Init adaptive controls
+	 */
+	val32 = rtl8xxxu_read32(priv, REG_RESPONSE_RATE_SET);
+	val32 &= ~RESPONSE_RATE_BITMAP_ALL;
+	val32 |= RESPONSE_RATE_RRSR_CCK_ONLY_1M;
+	rtl8xxxu_write32(priv, REG_RESPONSE_RATE_SET, val32);
+
+	/* CCK = 0x0a, OFDM = 0x10 */
+	rtl8xxxu_set_spec_sifs(priv, 0x10, 0x10);
+	rtl8xxxu_set_retry(priv, 0x30, 0x30);
+	rtl8xxxu_set_spec_sifs(priv, 0x0a, 0x10);
+
+	/*
+	 * Init EDCA
+	 */
+	rtl8xxxu_write16(priv, REG_MAC_SPEC_SIFS, 0x100a);
+
+	/* Set CCK SIFS */
+	rtl8xxxu_write16(priv, REG_SIFS_CCK, 0x100a);
+
+	/* Set OFDM SIFS */
+	rtl8xxxu_write16(priv, REG_SIFS_OFDM, 0x100a);
+
+	/* TXOP */
+	rtl8xxxu_write32(priv, REG_EDCA_BE_PARAM, 0x005ea42b);
+	rtl8xxxu_write32(priv, REG_EDCA_BK_PARAM, 0x0000a44f);
+	rtl8xxxu_write32(priv, REG_EDCA_VI_PARAM, 0x005ea324);
+	rtl8xxxu_write32(priv, REG_EDCA_VO_PARAM, 0x002fa226);
+
+	/* Set data auto rate fallback retry count */
+	rtl8xxxu_write32(priv, REG_DARFRC, 0x00000000);
+	rtl8xxxu_write32(priv, REG_DARFRC + 4, 0x10080404);
+	rtl8xxxu_write32(priv, REG_RARFRC, 0x04030201);
+	rtl8xxxu_write32(priv, REG_RARFRC + 4, 0x08070605);
+
+	val8 = rtl8xxxu_read8(priv, REG_FWHW_TXQ_CTRL);
+	val8 |= FWHW_TXQ_CTRL_AMPDU_RETRY;
+	rtl8xxxu_write8(priv, REG_FWHW_TXQ_CTRL, val8);
+
+	/*  Set ACK timeout */
+	rtl8xxxu_write8(priv, REG_ACKTO, 0x40);
+
+	/*
+	 * Initialize beacon parameters
+	 */
+	val16 = BEACON_DISABLE_TSF_UPDATE | (BEACON_DISABLE_TSF_UPDATE << 8);
+	rtl8xxxu_write16(priv, REG_BEACON_CTRL, val16);
+	rtl8xxxu_write16(priv, REG_TBTT_PROHIBIT, 0x6404);
+	if (priv->rtl_chip != RTL8188F && priv->rtl_chip != RTL8710B &&
+	    priv->rtl_chip != RTL8192F)
+		/* Firmware will control REG_DRVERLYINT when power saving is enable, */
+		/* so don't set this register on STA mode. */
+		rtl8xxxu_write8(priv, REG_DRIVER_EARLY_INT, DRIVER_EARLY_INT_TIME);
+	rtl8xxxu_write8(priv, REG_BEACON_DMA_TIME, BEACON_DMA_ATIME_INT_TIME);
+	rtl8xxxu_write16(priv, REG_BEACON_TCFG, 0x660F);
+
+	/*
+	 * Initialize burst parameters
+	 */
+	if (priv->fops->init_burst)
+		priv->fops->init_burst(priv);
+
+	if (fops->init_aggregation)
+		fops->init_aggregation(priv);
+
+	if (fops->init_reg_pkt_life_time) {
+		rtl8xxxu_write16(priv, REG_PKT_VO_VI_LIFE_TIME, 0x0400); /* unit: 256us. 256ms */
+		rtl8xxxu_write16(priv, REG_PKT_BE_BK_LIFE_TIME, 0x0400); /* unit: 256us. 256ms */
+	}
+
+	/*
+	 * Enable CCK and OFDM block
+	 */
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE);
+	val32 |= (FPGA_RF_MODE_CCK | FPGA_RF_MODE_OFDM);
+	rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32);
+
+	/*
+	 * Invalidate all CAM entries - bit 30 is undocumented
+	 */
+	rtl8xxxu_write32(priv, REG_CAM_CMD, CAM_CMD_POLLING | BIT(30));
+
+	/*
+	 * Start out with default power levels for channel 6, 20MHz
+	 */
+	fops->set_tx_power(priv, 1, false);
+
+	/* Let the 8051 take control of antenna setting */
+	if (priv->rtl_chip != RTL8192E && priv->rtl_chip != RTL8188F &&
+	    priv->rtl_chip != RTL8710B) {
+		val8 = rtl8xxxu_read8(priv, REG_LEDCFG2);
+		val8 |= LEDCFG2_DPDT_SELECT;
+		rtl8xxxu_write8(priv, REG_LEDCFG2, val8);
+	}
+
+	rtl8xxxu_write8(priv, REG_HWSEQ_CTRL, 0xff);
+
+	/* Disable BAR - not sure if this has any effect on USB */
+	rtl8xxxu_write32(priv, REG_BAR_MODE_CTRL, 0x0201ffff);
+
+	if (priv->rtl_chip != RTL8188F && priv->rtl_chip != RTL8188E &&
+	    priv->rtl_chip != RTL8710B && priv->rtl_chip != RTL8192F)
+		rtl8xxxu_write16(priv, REG_FAST_EDCA_CTRL, 0);
+
+	if (fops->init_statistics)
+		fops->init_statistics(priv);
+
+	if (priv->rtl_chip == RTL8192E) {
+		/*
+		 * 0x4c6[3] 1: RTS BW = Data BW
+		 * 0: RTS BW depends on CCA / secondary CCA result.
+		 */
+		val8 = rtl8xxxu_read8(priv, REG_QUEUE_CTRL);
+		val8 &= ~BIT(3);
+		rtl8xxxu_write8(priv, REG_QUEUE_CTRL, val8);
+		/*
+		 * Reset USB mode switch setting
+		 */
+		rtl8xxxu_write8(priv, REG_ACLK_MON, 0x00);
+	} else if (priv->rtl_chip == RTL8188F || priv->rtl_chip == RTL8188E ||
+		   priv->rtl_chip == RTL8192F) {
+		/*
+		 * Init GPIO settings for 8188f, 8188e, 8192f
+		 */
+		val8 = rtl8xxxu_read8(priv, REG_GPIO_MUXCFG);
+		val8 &= ~GPIO_MUXCFG_IO_SEL_ENBT;
+		rtl8xxxu_write8(priv, REG_GPIO_MUXCFG, val8);
+	}
+
+	if (priv->rtl_chip == RTL8188F)
+		/* CCK PD */
+		rtl8xxxu_write8(priv, REG_CCK_PD_THRESH, CCK_PD_TYPE1_LV1_TH);
+
+	fops->phy_lc_calibrate(priv);
+
+	fops->phy_iq_calibrate(priv);
+
+	/*
+	 * This should enable thermal meter
+	 */
+	if (fops->gen2_thermal_meter) {
+		if (priv->rtl_chip == RTL8188F || priv->rtl_chip == RTL8710B) {
+			val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_T_METER_8723B);
+			val32 |= 0x30000;
+			rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_T_METER_8723B, val32);
+		} else {
+			rtl8xxxu_write_rfreg(priv,
+					     RF_A, RF6052_REG_T_METER_8723B, 0x37cf8);
+		}
+	} else {
+		rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_T_METER, 0x60);
+	}
+
+	/* Set NAV_UPPER to 30000us */
+	val8 = ((30000 + NAV_UPPER_UNIT - 1) / NAV_UPPER_UNIT);
+	rtl8xxxu_write8(priv, REG_NAV_UPPER, val8);
+
+	if (priv->rtl_chip == RTL8723A) {
+		/*
+		 * 2011/03/09 MH debug only, UMC-B cut pass 2500 S5 test,
+		 * but we need to find root cause.
+		 * This is 8723au only.
+		 */
+		val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE);
+		if ((val32 & 0xff000000) != 0x83000000) {
+			val32 |= FPGA_RF_MODE_CCK;
+			rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32);
+		}
+	} else if (priv->rtl_chip == RTL8192E || priv->rtl_chip == RTL8188E) {
+		rtl8xxxu_write8(priv, REG_USB_HRPWM, 0x00);
+	}
+
+	val32 = rtl8xxxu_read32(priv, REG_FWHW_TXQ_CTRL);
+	val32 |= FWHW_TXQ_CTRL_XMIT_MGMT_ACK;
+	/* ack for xmit mgmt frames. */
+	rtl8xxxu_write32(priv, REG_FWHW_TXQ_CTRL, val32);
+
+	if (priv->rtl_chip == RTL8192E) {
+		/*
+		 * Fix LDPC rx hang issue.
+		 */
+		val32 = rtl8xxxu_read32(priv, REG_AFE_MISC);
+		rtl8xxxu_write8(priv, REG_8192E_LDOV12_CTRL, 0x75);
+		val32 &= 0xfff00fff;
+		val32 |= 0x0007e000;
+		rtl8xxxu_write32(priv, REG_AFE_MISC, val32);
+
+		/*
+		 * 0x824[9] = 0x82C[9] = 0xA80[7] those registers setting
+		 * should be equal or CCK RSSI report may be incorrect
+		 */
+		val32 = rtl8xxxu_read32(priv, REG_FPGA0_XA_HSSI_PARM2);
+		priv->cck_agc_report_type =
+			u32_get_bits(val32, FPGA0_HSSI_PARM2_CCK_HIGH_PWR);
+
+		val32 = rtl8xxxu_read32(priv, REG_FPGA0_XB_HSSI_PARM2);
+		if (priv->cck_agc_report_type !=
+		    u32_get_bits(val32, FPGA0_HSSI_PARM2_CCK_HIGH_PWR)) {
+			if (priv->cck_agc_report_type)
+				val32 |= FPGA0_HSSI_PARM2_CCK_HIGH_PWR;
+			else
+				val32 &= ~FPGA0_HSSI_PARM2_CCK_HIGH_PWR;
+			rtl8xxxu_write32(priv, REG_FPGA0_XB_HSSI_PARM2, val32);
+		}
+
+		val32 = rtl8xxxu_read32(priv, REG_AGC_RPT);
+		if (priv->cck_agc_report_type)
+			val32 |= AGC_RPT_CCK;
+		else
+			val32 &= ~AGC_RPT_CCK;
+		rtl8xxxu_write32(priv, REG_AGC_RPT, val32);
+	}
+
+	if (priv->rtl_chip == RTL8710B) {
+		/*
+		 * 0x76D[5:4] is Port0,Port1 Enable Bit.
+		 * This is only for 8710B, 2b'00 for MP and 2b'11 for Normal Driver
+		 */
+		val8 = rtl8xxxu_read8(priv, REG_PORT_CONTROL_8710B);
+		val8 |= BIT(5) | BIT(4);
+		rtl8xxxu_write8(priv, REG_PORT_CONTROL_8710B, val8);
+
+		/* Set 0x5c[8] and [2:0] = 1, LDO mode */
+		val32 = rtl8xxxu_read32(priv, REG_WL_RF_PSS_8710B);
+		val32 |= 0x107;
+		rtl8xxxu_write32(priv, REG_WL_RF_PSS_8710B, val32);
+	}
+
+	val32 = rtl8xxxu_read32(priv, 0xa9c);
+	priv->cck_new_agc = u32_get_bits(val32, BIT(17));
+
+	/* Initialise the center frequency offset tracking */
+	if (priv->fops->set_crystal_cap) {
+		val32 = rtl8xxxu_read32(priv, REG_OFDM1_CFO_TRACKING);
+		priv->cfo_tracking.atc_status = val32 & CFO_TRACKING_ATC_STATUS;
+		priv->cfo_tracking.adjust = true;
+		priv->cfo_tracking.crystal_cap = priv->default_crystal_cap;
+	}
+
+	if (priv->rtl_chip == RTL8188E)
+		rtl8188e_ra_info_init_all(&priv->ra_info);
+
+	set_bit(RTL8XXXU_BC_MC_MACID, priv->mac_id_map);
+
+exit:
+	return ret;
+}
+
+static void rtl8xxxu_cam_write(struct rtl8xxxu_priv *priv,
+			       struct ieee80211_key_conf *key, const u8 *mac)
+{
+	u32 cmd, val32, addr, ctrl;
+	int j, i, tmp_debug;
+
+	tmp_debug = rtl8xxxu_debug;
+	if (rtl8xxxu_debug & RTL8XXXU_DEBUG_KEY)
+		rtl8xxxu_debug |= RTL8XXXU_DEBUG_REG_WRITE;
+
+	/*
+	 * This is a bit of a hack - the lower bits of the cipher
+	 * suite selector happens to match the cipher index in the CAM
+	 */
+	addr = key->keyidx << CAM_CMD_KEY_SHIFT;
+	ctrl = (key->cipher & 0x0f) << 2 | key->keyidx | CAM_WRITE_VALID;
+
+	for (j = 5; j >= 0; j--) {
+		switch (j) {
+		case 0:
+			val32 = ctrl | (mac[0] << 16) | (mac[1] << 24);
+			break;
+		case 1:
+			val32 = mac[2] | (mac[3] << 8) |
+				(mac[4] << 16) | (mac[5] << 24);
+			break;
+		default:
+			i = (j - 2) << 2;
+			val32 = key->key[i] | (key->key[i + 1] << 8) |
+				key->key[i + 2] << 16 | key->key[i + 3] << 24;
+			break;
+		}
+
+		rtl8xxxu_write32(priv, REG_CAM_WRITE, val32);
+		cmd = CAM_CMD_POLLING | CAM_CMD_WRITE | (addr + j);
+		rtl8xxxu_write32(priv, REG_CAM_CMD, cmd);
+		udelay(100);
+	}
+
+	rtl8xxxu_debug = tmp_debug;
+}
+
+static
+int rtl8xxxu_get_antenna(struct ieee80211_hw *hw, u32 *tx_ant, u32 *rx_ant)
+{
+	struct rtl8xxxu_priv *priv = hw->priv;
+
+	*tx_ant = BIT(priv->tx_paths) - 1;
+	*rx_ant = BIT(priv->rx_paths) - 1;
+
+	return 0;
+}
+
+static int rtl8xxxu_set_tim(struct ieee80211_hw *hw, struct ieee80211_sta *sta,
+			    bool set)
+{
+	struct rtl8xxxu_priv *priv = hw->priv;
+
+	schedule_work(&priv->update_beacon_work);
+
+	return 0;
+}
+
+static void rtl8xxxu_sw_scan_start(struct ieee80211_hw *hw,
+				   struct ieee80211_vif *vif, const u8 *mac)
+{
+	struct rtl8xxxu_priv *priv = hw->priv;
+	u8 val8;
+
+	val8 = rtl8xxxu_read8(priv, REG_BEACON_CTRL);
+	val8 |= BEACON_DISABLE_TSF_UPDATE;
+	rtl8xxxu_write8(priv, REG_BEACON_CTRL, val8);
+}
+
+static void rtl8xxxu_sw_scan_complete(struct ieee80211_hw *hw,
+				      struct ieee80211_vif *vif)
+{
+	struct rtl8xxxu_priv *priv = hw->priv;
+	u8 val8;
+
+	val8 = rtl8xxxu_read8(priv, REG_BEACON_CTRL);
+	val8 &= ~BEACON_DISABLE_TSF_UPDATE;
+	rtl8xxxu_write8(priv, REG_BEACON_CTRL, val8);
+}
+
+void rtl8xxxu_update_rate_mask(struct rtl8xxxu_priv *priv,
+			       u32 ramask, u8 rateid, int sgi, int txbw_40mhz,
+			       u8 macid)
+{
+	struct h2c_cmd h2c;
+
+	memset(&h2c, 0, sizeof(struct h2c_cmd));
+
+	h2c.ramask.cmd = H2C_SET_RATE_MASK;
+	h2c.ramask.mask_lo = cpu_to_le16(ramask & 0xffff);
+	h2c.ramask.mask_hi = cpu_to_le16(ramask >> 16);
+
+	h2c.ramask.arg = 0x80;
+	if (sgi)
+		h2c.ramask.arg |= 0x20;
+
+	dev_dbg(&priv->udev->dev, "%s: rate mask %08x, arg %02x, size %zi\n",
+		__func__, ramask, h2c.ramask.arg, sizeof(h2c.ramask));
+	rtl8xxxu_gen1_h2c_cmd(priv, &h2c, sizeof(h2c.ramask));
+}
+
+void rtl8xxxu_gen2_update_rate_mask(struct rtl8xxxu_priv *priv,
+				    u32 ramask, u8 rateid, int sgi, int txbw_40mhz,
+				    u8 macid)
+{
+	struct h2c_cmd h2c;
+	u8 bw;
+
+	if (txbw_40mhz)
+		bw = RTL8XXXU_CHANNEL_WIDTH_40;
+	else
+		bw = RTL8XXXU_CHANNEL_WIDTH_20;
+
+	memset(&h2c, 0, sizeof(struct h2c_cmd));
+
+	h2c.b_macid_cfg.cmd = H2C_8723B_MACID_CFG_RAID;
+	h2c.b_macid_cfg.ramask0 = ramask & 0xff;
+	h2c.b_macid_cfg.ramask1 = (ramask >> 8) & 0xff;
+	h2c.b_macid_cfg.ramask2 = (ramask >> 16) & 0xff;
+	h2c.b_macid_cfg.ramask3 = (ramask >> 24) & 0xff;
+	h2c.b_macid_cfg.macid = macid;
+
+	h2c.b_macid_cfg.data1 = rateid;
+	if (sgi)
+		h2c.b_macid_cfg.data1 |= BIT(7);
+
+	h2c.b_macid_cfg.data2 = bw;
+
+	dev_dbg(&priv->udev->dev, "%s: rate mask %08x, rateid %02x, sgi %d, size %zi\n",
+		__func__, ramask, rateid, sgi, sizeof(h2c.b_macid_cfg));
+	rtl8xxxu_gen2_h2c_cmd(priv, &h2c, sizeof(h2c.b_macid_cfg));
+}
+
+void rtl8xxxu_gen1_report_connect(struct rtl8xxxu_priv *priv,
+				  u8 macid, u8 role, bool connect)
+{
+	struct h2c_cmd h2c;
+
+	memset(&h2c, 0, sizeof(struct h2c_cmd));
+
+	h2c.joinbss.cmd = H2C_JOIN_BSS_REPORT;
+
+	if (connect)
+		h2c.joinbss.data = H2C_JOIN_BSS_CONNECT;
+	else
+		h2c.joinbss.data = H2C_JOIN_BSS_DISCONNECT;
+
+	rtl8xxxu_gen1_h2c_cmd(priv, &h2c, sizeof(h2c.joinbss));
+}
+
+void rtl8xxxu_gen2_report_connect(struct rtl8xxxu_priv *priv,
+				  u8 macid, u8 role, bool connect)
+{
+	/*
+	 * The firmware turns on the rate control when it knows it's
+	 * connected to a network.
+	 */
+	struct h2c_cmd h2c;
+
+	memset(&h2c, 0, sizeof(struct h2c_cmd));
+
+	h2c.media_status_rpt.cmd = H2C_8723B_MEDIA_STATUS_RPT;
+	if (connect)
+		h2c.media_status_rpt.parm |= BIT(0);
+	else
+		h2c.media_status_rpt.parm &= ~BIT(0);
+
+	h2c.media_status_rpt.parm |= ((role << 4) & 0xf0);
+	h2c.media_status_rpt.macid = macid;
+
+	rtl8xxxu_gen2_h2c_cmd(priv, &h2c, sizeof(h2c.media_status_rpt));
+}
+
+void rtl8xxxu_gen1_report_rssi(struct rtl8xxxu_priv *priv, u8 macid, u8 rssi)
+{
+	struct h2c_cmd h2c;
+	const int h2c_size = 4;
+
+	memset(&h2c, 0, sizeof(struct h2c_cmd));
+
+	h2c.rssi_report.cmd = H2C_SET_RSSI;
+	h2c.rssi_report.macid = macid;
+	h2c.rssi_report.rssi = rssi;
+
+	rtl8xxxu_gen1_h2c_cmd(priv, &h2c, h2c_size);
+}
+
+void rtl8xxxu_gen2_report_rssi(struct rtl8xxxu_priv *priv, u8 macid, u8 rssi)
+{
+	struct h2c_cmd h2c;
+	int h2c_size = sizeof(h2c.rssi_report);
+
+	if (priv->rtl_chip == RTL8723B)
+		h2c_size = 4;
+
+	memset(&h2c, 0, sizeof(struct h2c_cmd));
+
+	h2c.rssi_report.cmd = H2C_8723B_RSSI_SETTING;
+	h2c.rssi_report.macid = macid;
+	h2c.rssi_report.rssi = rssi;
+
+	rtl8xxxu_gen2_h2c_cmd(priv, &h2c, h2c_size);
+}
+
+void rtl8xxxu_gen1_init_aggregation(struct rtl8xxxu_priv *priv)
+{
+	u8 agg_ctrl, usb_spec, page_thresh, timeout;
+
+	usb_spec = rtl8xxxu_read8(priv, REG_USB_SPECIAL_OPTION);
+	usb_spec &= ~USB_SPEC_USB_AGG_ENABLE;
+	rtl8xxxu_write8(priv, REG_USB_SPECIAL_OPTION, usb_spec);
+
+	agg_ctrl = rtl8xxxu_read8(priv, REG_TRXDMA_CTRL);
+	agg_ctrl &= ~TRXDMA_CTRL_RXDMA_AGG_EN;
+
+	if (!rtl8xxxu_dma_aggregation) {
+		rtl8xxxu_write8(priv, REG_TRXDMA_CTRL, agg_ctrl);
+		return;
+	}
+
+	agg_ctrl |= TRXDMA_CTRL_RXDMA_AGG_EN;
+	rtl8xxxu_write8(priv, REG_TRXDMA_CTRL, agg_ctrl);
+
+	/*
+	 * The number of packets we can take looks to be buffer size / 512
+	 * which matches the 512 byte rounding we have to do when de-muxing
+	 * the packets.
+	 *
+	 * Sample numbers from the vendor driver:
+	 * USB High-Speed mode values:
+	 *   RxAggBlockCount = 8 : 512 byte unit
+	 *   RxAggBlockTimeout = 6
+	 *   RxAggPageCount = 48 : 128 byte unit
+	 *   RxAggPageTimeout = 4 or 6 (absolute time 34ms/(2^6))
+	 */
+
+	page_thresh = (priv->fops->rx_agg_buf_size / 512);
+	if (rtl8xxxu_dma_agg_pages >= 0) {
+		if (rtl8xxxu_dma_agg_pages <= page_thresh)
+			timeout = page_thresh;
+		else if (rtl8xxxu_dma_agg_pages <= 6)
+			dev_err(&priv->udev->dev,
+				"%s: dma_agg_pages=%i too small, minimum is 6\n",
+				__func__, rtl8xxxu_dma_agg_pages);
+		else
+			dev_err(&priv->udev->dev,
+				"%s: dma_agg_pages=%i larger than limit %i\n",
+				__func__, rtl8xxxu_dma_agg_pages, page_thresh);
+	}
+	rtl8xxxu_write8(priv, REG_RXDMA_AGG_PG_TH, page_thresh);
+	/*
+	 * REG_RXDMA_AGG_PG_TH + 1 seems to be the timeout register on
+	 * gen2 chips and rtl8188eu. The rtl8723au seems unhappy if we
+	 * don't set it, so better set both.
+	 */
+	timeout = 4;
+
+	if (rtl8xxxu_dma_agg_timeout >= 0) {
+		if (rtl8xxxu_dma_agg_timeout <= 127)
+			timeout = rtl8xxxu_dma_agg_timeout;
+		else
+			dev_err(&priv->udev->dev,
+				"%s: Invalid dma_agg_timeout: %i\n",
+				__func__, rtl8xxxu_dma_agg_timeout);
+	}
+
+	rtl8xxxu_write8(priv, REG_RXDMA_AGG_PG_TH + 1, timeout);
+	rtl8xxxu_write8(priv, REG_USB_DMA_AGG_TO, timeout);
+	priv->rx_buf_aggregation = 1;
+}
+
+static const struct ieee80211_rate rtl8xxxu_legacy_ratetable[] = {
+	{.bitrate = 10, .hw_value = 0x00,},
+	{.bitrate = 20, .hw_value = 0x01,},
+	{.bitrate = 55, .hw_value = 0x02,},
+	{.bitrate = 110, .hw_value = 0x03,},
+	{.bitrate = 60, .hw_value = 0x04,},
+	{.bitrate = 90, .hw_value = 0x05,},
+	{.bitrate = 120, .hw_value = 0x06,},
+	{.bitrate = 180, .hw_value = 0x07,},
+	{.bitrate = 240, .hw_value = 0x08,},
+	{.bitrate = 360, .hw_value = 0x09,},
+	{.bitrate = 480, .hw_value = 0x0a,},
+	{.bitrate = 540, .hw_value = 0x0b,},
+};
+
+static void rtl8xxxu_desc_to_mcsrate(u16 rate, u8 *mcs, u8 *nss)
+{
+	if (rate <= DESC_RATE_54M)
+		return;
+
+	if (rate >= DESC_RATE_MCS0 && rate <= DESC_RATE_MCS15) {
+		if (rate < DESC_RATE_MCS8)
+			*nss = 1;
+		else
+			*nss = 2;
+		*mcs = rate - DESC_RATE_MCS0;
+	}
+}
+
+static void rtl8xxxu_set_basic_rates(struct rtl8xxxu_priv *priv, u32 rate_cfg)
+{
+	struct ieee80211_hw *hw = priv->hw;
+	u32 val32;
+	u8 rate_idx = 0;
+
+	rate_cfg &= RESPONSE_RATE_BITMAP_ALL;
+
+	val32 = rtl8xxxu_read32(priv, REG_RESPONSE_RATE_SET);
+	if (hw->conf.chandef.chan->band == NL80211_BAND_5GHZ)
+		val32 &= RESPONSE_RATE_RRSR_INIT_5G;
+	else
+		val32 &= RESPONSE_RATE_RRSR_INIT_2G;
+	val32 |= rate_cfg;
+	rtl8xxxu_write32(priv, REG_RESPONSE_RATE_SET, val32);
+
+	dev_dbg(&priv->udev->dev, "%s: rates %08x\n", __func__,	rate_cfg);
+
+	while (rate_cfg) {
+		rate_cfg = (rate_cfg >> 1);
+		rate_idx++;
+	}
+	rtl8xxxu_write8(priv, REG_INIRTS_RATE_SEL, rate_idx);
+}
+
+static u16
+rtl8xxxu_wireless_mode(struct ieee80211_hw *hw, struct ieee80211_sta *sta)
+{
+	u16 network_type = WIRELESS_MODE_UNKNOWN;
+
+	if (hw->conf.chandef.chan->band == NL80211_BAND_5GHZ) {
+		if (sta->deflink.vht_cap.vht_supported)
+			network_type = WIRELESS_MODE_AC;
+		else if (sta->deflink.ht_cap.ht_supported)
+			network_type = WIRELESS_MODE_N_5G;
+
+		network_type |= WIRELESS_MODE_A;
+	} else {
+		if (sta->deflink.vht_cap.vht_supported)
+			network_type = WIRELESS_MODE_AC;
+		else if (sta->deflink.ht_cap.ht_supported)
+			network_type = WIRELESS_MODE_N_24G;
+
+		if (sta->deflink.supp_rates[0] <= 0xf)
+			network_type |= WIRELESS_MODE_B;
+		else if (sta->deflink.supp_rates[0] & 0xf)
+			network_type |= (WIRELESS_MODE_B | WIRELESS_MODE_G);
+		else
+			network_type |= WIRELESS_MODE_G;
+	}
+
+	return network_type;
+}
+
+static void rtl8xxxu_set_aifs(struct rtl8xxxu_priv *priv, u8 slot_time)
+{
+	u32 reg_edca_param[IEEE80211_NUM_ACS] = {
+		[IEEE80211_AC_VO] = REG_EDCA_VO_PARAM,
+		[IEEE80211_AC_VI] = REG_EDCA_VI_PARAM,
+		[IEEE80211_AC_BE] = REG_EDCA_BE_PARAM,
+		[IEEE80211_AC_BK] = REG_EDCA_BK_PARAM,
+	};
+	u32 val32;
+	u16 wireless_mode = 0;
+	u8 aifs, aifsn, sifs;
+	int i;
+
+	if (priv->vif) {
+		struct ieee80211_sta *sta;
+
+		rcu_read_lock();
+		sta = ieee80211_find_sta(priv->vif, priv->vif->bss_conf.bssid);
+		if (sta)
+			wireless_mode = rtl8xxxu_wireless_mode(priv->hw, sta);
+		rcu_read_unlock();
+	}
+
+	if (priv->hw->conf.chandef.chan->band == NL80211_BAND_5GHZ ||
+	    (wireless_mode & WIRELESS_MODE_N_24G))
+		sifs = 16;
+	else
+		sifs = 10;
+
+	for (i = 0; i < IEEE80211_NUM_ACS; i++) {
+		val32 = rtl8xxxu_read32(priv, reg_edca_param[i]);
+
+		/* It was set in conf_tx. */
+		aifsn = val32 & 0xff;
+
+		/* aifsn not set yet or already fixed */
+		if (aifsn < 2 || aifsn > 15)
+			continue;
+
+		aifs = aifsn * slot_time + sifs;
+
+		val32 &= ~0xff;
+		val32 |= aifs;
+		rtl8xxxu_write32(priv, reg_edca_param[i], val32);
+	}
+}
+
+void rtl8xxxu_update_ra_report(struct rtl8xxxu_ra_report *rarpt,
+			       u8 rate, u8 sgi, u8 bw)
+{
+	u8 mcs, nss;
+
+	rarpt->txrate.flags = 0;
+
+	if (rate <= DESC_RATE_54M) {
+		rarpt->txrate.legacy = rtl8xxxu_legacy_ratetable[rate].bitrate;
+	} else {
+		rtl8xxxu_desc_to_mcsrate(rate, &mcs, &nss);
+		rarpt->txrate.flags |= RATE_INFO_FLAGS_MCS;
+
+		rarpt->txrate.mcs = mcs;
+		rarpt->txrate.nss = nss;
+
+		if (sgi)
+			rarpt->txrate.flags |= RATE_INFO_FLAGS_SHORT_GI;
+
+		rarpt->txrate.bw = bw;
+	}
+
+	rarpt->bit_rate = cfg80211_calculate_bitrate(&rarpt->txrate);
+	rarpt->desc_rate = rate;
+}
+
+static void
+rtl8xxxu_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+			  struct ieee80211_bss_conf *bss_conf, u64 changed)
+{
+	struct rtl8xxxu_priv *priv = hw->priv;
+	struct device *dev = &priv->udev->dev;
+	struct ieee80211_sta *sta;
+	struct rtl8xxxu_ra_report *rarpt;
+	u32 val32;
+	u8 val8;
+
+	rarpt = &priv->ra_report;
+
+	if (changed & BSS_CHANGED_ASSOC) {
+		dev_dbg(dev, "Changed ASSOC: %i!\n", vif->cfg.assoc);
+
+		rtl8xxxu_set_linktype(priv, vif->type);
+
+		if (vif->cfg.assoc) {
+			u32 ramask;
+			int sgi = 0;
+			u8 highest_rate;
+			u8 bw;
+
+			rcu_read_lock();
+			sta = ieee80211_find_sta(vif, bss_conf->bssid);
+			if (!sta) {
+				dev_info(dev, "%s: ASSOC no sta found\n",
+					 __func__);
+				rcu_read_unlock();
+				goto error;
+			}
+
+			if (sta->deflink.ht_cap.ht_supported)
+				dev_info(dev, "%s: HT supported\n", __func__);
+			if (sta->deflink.vht_cap.vht_supported)
+				dev_info(dev, "%s: VHT supported\n", __func__);
+
+			/* TODO: Set bits 28-31 for rate adaptive id */
+			ramask = (sta->deflink.supp_rates[0] & 0xfff) |
+				sta->deflink.ht_cap.mcs.rx_mask[0] << 12 |
+				sta->deflink.ht_cap.mcs.rx_mask[1] << 20;
+			if (sta->deflink.ht_cap.cap &
+			    (IEEE80211_HT_CAP_SGI_40 | IEEE80211_HT_CAP_SGI_20))
+				sgi = 1;
+
+			highest_rate = fls(ramask) - 1;
+			if (rtl8xxxu_ht40_2g &&
+			    (sta->deflink.ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40))
+				bw = RATE_INFO_BW_40;
+			else
+				bw = RATE_INFO_BW_20;
+			rcu_read_unlock();
+
+			rtl8xxxu_update_ra_report(rarpt, highest_rate, sgi, bw);
+
+			priv->vif = vif;
+			priv->rssi_level = RTL8XXXU_RATR_STA_INIT;
+
+			priv->fops->update_rate_mask(priv, ramask, 0, sgi,
+						     bw == RATE_INFO_BW_40, 0);
+
+			rtl8xxxu_write8(priv, REG_BCN_MAX_ERR, 0xff);
+
+			rtl8xxxu_stop_tx_beacon(priv);
+
+			/* joinbss sequence */
+			rtl8xxxu_write16(priv, REG_BCN_PSR_RPT,
+					 0xc000 | vif->cfg.aid);
+
+			priv->fops->report_connect(priv, 0, H2C_MACID_ROLE_AP, true);
+		} else {
+			val8 = rtl8xxxu_read8(priv, REG_BEACON_CTRL);
+			val8 |= BEACON_DISABLE_TSF_UPDATE;
+			rtl8xxxu_write8(priv, REG_BEACON_CTRL, val8);
+
+			priv->fops->report_connect(priv, 0, H2C_MACID_ROLE_AP, false);
+		}
+	}
+
+	if (changed & BSS_CHANGED_ERP_PREAMBLE) {
+		dev_dbg(dev, "Changed ERP_PREAMBLE: Use short preamble %i\n",
+			bss_conf->use_short_preamble);
+		val32 = rtl8xxxu_read32(priv, REG_RESPONSE_RATE_SET);
+		if (bss_conf->use_short_preamble)
+			val32 |= RSR_ACK_SHORT_PREAMBLE;
+		else
+			val32 &= ~RSR_ACK_SHORT_PREAMBLE;
+		rtl8xxxu_write32(priv, REG_RESPONSE_RATE_SET, val32);
+	}
+
+	if (changed & BSS_CHANGED_ERP_SLOT) {
+		dev_dbg(dev, "Changed ERP_SLOT: short_slot_time %i\n",
+			bss_conf->use_short_slot);
+
+		if (bss_conf->use_short_slot)
+			val8 = 9;
+		else
+			val8 = 20;
+		rtl8xxxu_write8(priv, REG_SLOT, val8);
+
+		rtl8xxxu_set_aifs(priv, val8);
+	}
+
+	if (changed & BSS_CHANGED_BSSID) {
+		dev_dbg(dev, "Changed BSSID!\n");
+		rtl8xxxu_set_bssid(priv, bss_conf->bssid);
+	}
+
+	if (changed & BSS_CHANGED_BASIC_RATES) {
+		dev_dbg(dev, "Changed BASIC_RATES!\n");
+		rtl8xxxu_set_basic_rates(priv, bss_conf->basic_rates);
+	}
+
+	if (changed & BSS_CHANGED_BEACON_ENABLED) {
+		if (bss_conf->enable_beacon)
+			rtl8xxxu_start_tx_beacon(priv);
+		else
+			rtl8xxxu_stop_tx_beacon(priv);
+	}
+
+	if (changed & BSS_CHANGED_BEACON)
+		schedule_work(&priv->update_beacon_work);
+
+error:
+	return;
+}
+
+static int rtl8xxxu_start_ap(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+			     struct ieee80211_bss_conf *link_conf)
+{
+	struct rtl8xxxu_priv *priv = hw->priv;
+	struct device *dev = &priv->udev->dev;
+
+	dev_dbg(dev, "Start AP mode\n");
+	rtl8xxxu_set_bssid(priv, vif->bss_conf.bssid);
+	rtl8xxxu_write16(priv, REG_BCN_INTERVAL, vif->bss_conf.beacon_int);
+	priv->fops->report_connect(priv, RTL8XXXU_BC_MC_MACID, 0, true);
+
+	return 0;
+}
+
+static u32 rtl8xxxu_80211_to_rtl_queue(u32 queue)
+{
+	u32 rtlqueue;
+
+	switch (queue) {
+	case IEEE80211_AC_VO:
+		rtlqueue = TXDESC_QUEUE_VO;
+		break;
+	case IEEE80211_AC_VI:
+		rtlqueue = TXDESC_QUEUE_VI;
+		break;
+	case IEEE80211_AC_BE:
+		rtlqueue = TXDESC_QUEUE_BE;
+		break;
+	case IEEE80211_AC_BK:
+		rtlqueue = TXDESC_QUEUE_BK;
+		break;
+	default:
+		rtlqueue = TXDESC_QUEUE_BE;
+	}
+
+	return rtlqueue;
+}
+
+static u32 rtl8xxxu_queue_select(struct ieee80211_hdr *hdr, struct sk_buff *skb)
+{
+	u32 queue;
+
+	if (unlikely(ieee80211_is_beacon(hdr->frame_control)))
+		queue = TXDESC_QUEUE_BEACON;
+	else if (ieee80211_is_mgmt(hdr->frame_control))
+		queue = TXDESC_QUEUE_MGNT;
+	else
+		queue = rtl8xxxu_80211_to_rtl_queue(skb_get_queue_mapping(skb));
+
+	return queue;
+}
+
+/*
+ * Despite newer chips 8723b/8812/8821 having a larger TX descriptor
+ * format. The descriptor checksum is still only calculated over the
+ * initial 32 bytes of the descriptor!
+ */
+static void rtl8xxxu_calc_tx_desc_csum(struct rtl8xxxu_txdesc32 *tx_desc)
+{
+	__le16 *ptr = (__le16 *)tx_desc;
+	u16 csum = 0;
+	int i;
+
+	/*
+	 * Clear csum field before calculation, as the csum field is
+	 * in the middle of the struct.
+	 */
+	tx_desc->csum = cpu_to_le16(0);
+
+	for (i = 0; i < (sizeof(struct rtl8xxxu_txdesc32) / sizeof(u16)); i++)
+		csum = csum ^ le16_to_cpu(ptr[i]);
+
+	tx_desc->csum |= cpu_to_le16(csum);
+}
+
+static void rtl8xxxu_free_tx_resources(struct rtl8xxxu_priv *priv)
+{
+	struct rtl8xxxu_tx_urb *tx_urb, *tmp;
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->tx_urb_lock, flags);
+	list_for_each_entry_safe(tx_urb, tmp, &priv->tx_urb_free_list, list) {
+		list_del(&tx_urb->list);
+		priv->tx_urb_free_count--;
+		usb_free_urb(&tx_urb->urb);
+	}
+	spin_unlock_irqrestore(&priv->tx_urb_lock, flags);
+}
+
+static struct rtl8xxxu_tx_urb *
+rtl8xxxu_alloc_tx_urb(struct rtl8xxxu_priv *priv)
+{
+	struct rtl8xxxu_tx_urb *tx_urb;
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->tx_urb_lock, flags);
+	tx_urb = list_first_entry_or_null(&priv->tx_urb_free_list,
+					  struct rtl8xxxu_tx_urb, list);
+	if (tx_urb) {
+		list_del(&tx_urb->list);
+		priv->tx_urb_free_count--;
+		if (priv->tx_urb_free_count < RTL8XXXU_TX_URB_LOW_WATER &&
+		    !priv->tx_stopped) {
+			priv->tx_stopped = true;
+			ieee80211_stop_queues(priv->hw);
+		}
+	}
+
+	spin_unlock_irqrestore(&priv->tx_urb_lock, flags);
+
+	return tx_urb;
+}
+
+static void rtl8xxxu_free_tx_urb(struct rtl8xxxu_priv *priv,
+				 struct rtl8xxxu_tx_urb *tx_urb)
+{
+	unsigned long flags;
+
+	INIT_LIST_HEAD(&tx_urb->list);
+
+	spin_lock_irqsave(&priv->tx_urb_lock, flags);
+
+	list_add(&tx_urb->list, &priv->tx_urb_free_list);
+	priv->tx_urb_free_count++;
+	if (priv->tx_urb_free_count > RTL8XXXU_TX_URB_HIGH_WATER &&
+	    priv->tx_stopped) {
+		priv->tx_stopped = false;
+		ieee80211_wake_queues(priv->hw);
+	}
+
+	spin_unlock_irqrestore(&priv->tx_urb_lock, flags);
+}
+
+static void rtl8xxxu_tx_complete(struct urb *urb)
+{
+	struct sk_buff *skb = (struct sk_buff *)urb->context;
+	struct ieee80211_tx_info *tx_info;
+	struct ieee80211_hw *hw;
+	struct rtl8xxxu_priv *priv;
+	struct rtl8xxxu_tx_urb *tx_urb =
+		container_of(urb, struct rtl8xxxu_tx_urb, urb);
+
+	tx_info = IEEE80211_SKB_CB(skb);
+	hw = tx_info->rate_driver_data[0];
+	priv = hw->priv;
+
+	skb_pull(skb, priv->fops->tx_desc_size);
+
+	ieee80211_tx_info_clear_status(tx_info);
+	tx_info->status.rates[0].idx = -1;
+	tx_info->status.rates[0].count = 0;
+
+	if (!urb->status)
+		tx_info->flags |= IEEE80211_TX_STAT_ACK;
+
+	ieee80211_tx_status_irqsafe(hw, skb);
+
+	rtl8xxxu_free_tx_urb(priv, tx_urb);
+}
+
+static void rtl8xxxu_dump_action(struct device *dev,
+				 struct ieee80211_hdr *hdr)
+{
+	struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)hdr;
+	u16 cap, timeout;
+
+	if (!(rtl8xxxu_debug & RTL8XXXU_DEBUG_ACTION))
+		return;
+
+	switch (mgmt->u.action.u.addba_resp.action_code) {
+	case WLAN_ACTION_ADDBA_RESP:
+		cap = le16_to_cpu(mgmt->u.action.u.addba_resp.capab);
+		timeout = le16_to_cpu(mgmt->u.action.u.addba_resp.timeout);
+		dev_info(dev, "WLAN_ACTION_ADDBA_RESP: "
+			 "timeout %i, tid %02x, buf_size %02x, policy %02x, "
+			 "status %02x\n",
+			 timeout,
+			 (cap & IEEE80211_ADDBA_PARAM_TID_MASK) >> 2,
+			 (cap & IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK) >> 6,
+			 (cap >> 1) & 0x1,
+			 le16_to_cpu(mgmt->u.action.u.addba_resp.status));
+		break;
+	case WLAN_ACTION_ADDBA_REQ:
+		cap = le16_to_cpu(mgmt->u.action.u.addba_req.capab);
+		timeout = le16_to_cpu(mgmt->u.action.u.addba_req.timeout);
+		dev_info(dev, "WLAN_ACTION_ADDBA_REQ: "
+			 "timeout %i, tid %02x, buf_size %02x, policy %02x\n",
+			 timeout,
+			 (cap & IEEE80211_ADDBA_PARAM_TID_MASK) >> 2,
+			 (cap & IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK) >> 6,
+			 (cap >> 1) & 0x1);
+		break;
+	default:
+		dev_info(dev, "action frame %02x\n",
+			 mgmt->u.action.u.addba_resp.action_code);
+		break;
+	}
+}
+
+/*
+ * Fill in v1 (gen1) specific TX descriptor bits.
+ * This format is used on 8188cu/8192cu/8723au
+ */
+void
+rtl8xxxu_fill_txdesc_v1(struct ieee80211_hw *hw, struct ieee80211_hdr *hdr,
+			struct ieee80211_tx_info *tx_info,
+			struct rtl8xxxu_txdesc32 *tx_desc, bool sgi,
+			bool short_preamble, bool ampdu_enable, u32 rts_rate,
+			u8 macid)
+{
+	struct rtl8xxxu_priv *priv = hw->priv;
+	struct device *dev = &priv->udev->dev;
+	u8 *qc = ieee80211_get_qos_ctl(hdr);
+	u8 tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK;
+	u32 rate = 0;
+	u16 seq_number;
+
+	if (rtl8xxxu_debug & RTL8XXXU_DEBUG_TX)
+		dev_info(dev, "%s: TX rate: %d, pkt size %u\n",
+			 __func__, rate, le16_to_cpu(tx_desc->pkt_size));
+
+	seq_number = IEEE80211_SEQ_TO_SN(le16_to_cpu(hdr->seq_ctrl));
+
+	tx_desc->txdw5 = cpu_to_le32(rate);
+
+	if (ieee80211_is_data(hdr->frame_control))
+		tx_desc->txdw5 |= cpu_to_le32(0x0001ff00);
+
+	tx_desc->txdw3 = cpu_to_le32((u32)seq_number << TXDESC32_SEQ_SHIFT);
+
+	if (ampdu_enable && test_bit(tid, priv->tid_tx_operational))
+		tx_desc->txdw1 |= cpu_to_le32(TXDESC32_AGG_ENABLE);
+	else
+		tx_desc->txdw1 |= cpu_to_le32(TXDESC32_AGG_BREAK);
+
+	if (ieee80211_is_mgmt(hdr->frame_control)) {
+		tx_desc->txdw5 = cpu_to_le32(rate);
+		tx_desc->txdw4 |= cpu_to_le32(TXDESC32_USE_DRIVER_RATE);
+		tx_desc->txdw5 |= cpu_to_le32(6 << TXDESC32_RETRY_LIMIT_SHIFT);
+		tx_desc->txdw5 |= cpu_to_le32(TXDESC32_RETRY_LIMIT_ENABLE);
+	}
+
+	if (ieee80211_is_data_qos(hdr->frame_control))
+		tx_desc->txdw4 |= cpu_to_le32(TXDESC32_QOS);
+
+	if (short_preamble)
+		tx_desc->txdw4 |= cpu_to_le32(TXDESC32_SHORT_PREAMBLE);
+
+	if (sgi)
+		tx_desc->txdw5 |= cpu_to_le32(TXDESC32_SHORT_GI);
+
+	/*
+	 * rts_rate is zero if RTS/CTS or CTS to SELF are not enabled
+	 */
+	tx_desc->txdw4 |= cpu_to_le32(rts_rate << TXDESC32_RTS_RATE_SHIFT);
+	if (ampdu_enable || tx_info->control.use_rts) {
+		tx_desc->txdw4 |= cpu_to_le32(TXDESC32_RTS_CTS_ENABLE);
+		tx_desc->txdw4 |= cpu_to_le32(TXDESC32_HW_RTS_ENABLE);
+	} else if (tx_info->control.use_cts_prot) {
+		tx_desc->txdw4 |= cpu_to_le32(TXDESC32_CTS_SELF_ENABLE);
+		tx_desc->txdw4 |= cpu_to_le32(TXDESC32_HW_RTS_ENABLE);
+	}
+}
+
+/*
+ * Fill in v2 (gen2) specific TX descriptor bits.
+ * This format is used on 8192eu/8723bu
+ */
+void
+rtl8xxxu_fill_txdesc_v2(struct ieee80211_hw *hw, struct ieee80211_hdr *hdr,
+			struct ieee80211_tx_info *tx_info,
+			struct rtl8xxxu_txdesc32 *tx_desc32, bool sgi,
+			bool short_preamble, bool ampdu_enable, u32 rts_rate,
+			u8 macid)
+{
+	struct rtl8xxxu_priv *priv = hw->priv;
+	struct device *dev = &priv->udev->dev;
+	struct rtl8xxxu_txdesc40 *tx_desc40;
+	u8 *qc = ieee80211_get_qos_ctl(hdr);
+	u8 tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK;
+	u32 rate = 0;
+	u16 seq_number;
+
+	tx_desc40 = (struct rtl8xxxu_txdesc40 *)tx_desc32;
+
+	if (rtl8xxxu_debug & RTL8XXXU_DEBUG_TX)
+		dev_info(dev, "%s: TX rate: %d, pkt size %u\n",
+			 __func__, rate, le16_to_cpu(tx_desc40->pkt_size));
+
+	tx_desc40->txdw1 |= cpu_to_le32(macid << TXDESC40_MACID_SHIFT);
+
+	seq_number = IEEE80211_SEQ_TO_SN(le16_to_cpu(hdr->seq_ctrl));
+
+	tx_desc40->txdw4 = cpu_to_le32(rate);
+	if (ieee80211_is_data(hdr->frame_control)) {
+		tx_desc40->txdw4 |= cpu_to_le32(0x1f <<
+						TXDESC40_DATA_RATE_FB_SHIFT);
+	}
+
+	tx_desc40->txdw9 = cpu_to_le32((u32)seq_number << TXDESC40_SEQ_SHIFT);
+
+	if (ampdu_enable && test_bit(tid, priv->tid_tx_operational))
+		tx_desc40->txdw2 |= cpu_to_le32(TXDESC40_AGG_ENABLE);
+	else
+		tx_desc40->txdw2 |= cpu_to_le32(TXDESC40_AGG_BREAK);
+
+	if (ieee80211_is_mgmt(hdr->frame_control)) {
+		tx_desc40->txdw4 = cpu_to_le32(rate);
+		tx_desc40->txdw3 |= cpu_to_le32(TXDESC40_USE_DRIVER_RATE);
+		tx_desc40->txdw4 |=
+			cpu_to_le32(6 << TXDESC40_RETRY_LIMIT_SHIFT);
+		tx_desc40->txdw4 |= cpu_to_le32(TXDESC40_RETRY_LIMIT_ENABLE);
+	}
+
+	if (tx_info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ)
+		tx_desc40->txdw8 |= cpu_to_le32(TXDESC40_HW_SEQ_ENABLE);
+
+	if (short_preamble)
+		tx_desc40->txdw5 |= cpu_to_le32(TXDESC40_SHORT_PREAMBLE);
+
+	tx_desc40->txdw4 |= cpu_to_le32(rts_rate << TXDESC40_RTS_RATE_SHIFT);
+
+	/*
+	 * rts_rate is zero if RTS/CTS or CTS to SELF are not enabled
+	 */
+	if (ampdu_enable || tx_info->control.use_rts) {
+		tx_desc40->txdw3 |= cpu_to_le32(TXDESC40_RTS_CTS_ENABLE);
+		tx_desc40->txdw3 |= cpu_to_le32(TXDESC40_HW_RTS_ENABLE);
+	} else if (tx_info->control.use_cts_prot) {
+		/*
+		 * For some reason the vendor driver doesn't set
+		 * TXDESC40_HW_RTS_ENABLE for CTS to SELF
+		 */
+		tx_desc40->txdw3 |= cpu_to_le32(TXDESC40_CTS_SELF_ENABLE);
+	}
+}
+
+/*
+ * Fill in v3 (gen1) specific TX descriptor bits.
+ * This format is a hybrid between the v1 and v2 formats, only seen
+ * on 8188eu devices so far.
+ */
+void
+rtl8xxxu_fill_txdesc_v3(struct ieee80211_hw *hw, struct ieee80211_hdr *hdr,
+			struct ieee80211_tx_info *tx_info,
+			struct rtl8xxxu_txdesc32 *tx_desc, bool sgi,
+			bool short_preamble, bool ampdu_enable, u32 rts_rate,
+			u8 macid)
+{
+	struct rtl8xxxu_priv *priv = hw->priv;
+	struct device *dev = &priv->udev->dev;
+	struct rtl8xxxu_ra_info *ra = &priv->ra_info;
+	u8 *qc = ieee80211_get_qos_ctl(hdr);
+	u8 tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK;
+	u32 rate = 0;
+	u16 seq_number;
+
+	seq_number = IEEE80211_SEQ_TO_SN(le16_to_cpu(hdr->seq_ctrl));
+
+	if (ieee80211_is_data(hdr->frame_control)) {
+		rate = ra->decision_rate;
+		tx_desc->txdw5 = cpu_to_le32(rate);
+		tx_desc->txdw4 |= cpu_to_le32(TXDESC32_USE_DRIVER_RATE);
+		tx_desc->txdw4 |= le32_encode_bits(ra->pt_stage, TXDESC32_PT_STAGE_MASK);
+		/* Data/RTS rate FB limit */
+		tx_desc->txdw5 |= cpu_to_le32(0x0001ff00);
+	}
+
+	if (rtl8xxxu_debug & RTL8XXXU_DEBUG_TX)
+		dev_info(dev, "%s: TX rate: %d, pkt size %d\n",
+			 __func__, rate, le16_to_cpu(tx_desc->pkt_size));
+
+	tx_desc->txdw3 = cpu_to_le32((u32)seq_number << TXDESC32_SEQ_SHIFT);
+
+	if (ampdu_enable && test_bit(tid, priv->tid_tx_operational))
+		tx_desc->txdw2 |= cpu_to_le32(TXDESC40_AGG_ENABLE);
+	else
+		tx_desc->txdw2 |= cpu_to_le32(TXDESC40_AGG_BREAK);
+
+	if (ieee80211_is_mgmt(hdr->frame_control)) {
+		tx_desc->txdw5 = cpu_to_le32(rate);
+		tx_desc->txdw4 |= cpu_to_le32(TXDESC32_USE_DRIVER_RATE);
+		tx_desc->txdw5 |= cpu_to_le32(6 << TXDESC32_RETRY_LIMIT_SHIFT);
+		tx_desc->txdw5 |= cpu_to_le32(TXDESC32_RETRY_LIMIT_ENABLE);
+	}
+
+	if (ieee80211_is_data_qos(hdr->frame_control)) {
+		tx_desc->txdw4 |= cpu_to_le32(TXDESC32_QOS);
+
+		if (conf_is_ht40(&hw->conf)) {
+			tx_desc->txdw4 |= cpu_to_le32(TXDESC_DATA_BW);
+
+			if (conf_is_ht40_minus(&hw->conf))
+				tx_desc->txdw4 |= cpu_to_le32(TXDESC_PRIME_CH_OFF_UPPER);
+			else
+				tx_desc->txdw4 |= cpu_to_le32(TXDESC_PRIME_CH_OFF_LOWER);
+		}
+	}
+
+	if (short_preamble)
+		tx_desc->txdw4 |= cpu_to_le32(TXDESC32_SHORT_PREAMBLE);
+
+	if (sgi && ra->rate_sgi)
+		tx_desc->txdw5 |= cpu_to_le32(TXDESC32_SHORT_GI);
+
+	/*
+	 * rts_rate is zero if RTS/CTS or CTS to SELF are not enabled
+	 */
+	tx_desc->txdw4 |= cpu_to_le32(rts_rate << TXDESC32_RTS_RATE_SHIFT);
+	if (ampdu_enable || tx_info->control.use_rts) {
+		tx_desc->txdw4 |= cpu_to_le32(TXDESC32_RTS_CTS_ENABLE);
+		tx_desc->txdw4 |= cpu_to_le32(TXDESC32_HW_RTS_ENABLE);
+	} else if (tx_info->control.use_cts_prot) {
+		tx_desc->txdw4 |= cpu_to_le32(TXDESC32_CTS_SELF_ENABLE);
+		tx_desc->txdw4 |= cpu_to_le32(TXDESC32_HW_RTS_ENABLE);
+	}
+
+	tx_desc->txdw2 |= cpu_to_le32(TXDESC_ANTENNA_SELECT_A |
+				      TXDESC_ANTENNA_SELECT_B);
+	tx_desc->txdw7 |= cpu_to_le16(TXDESC_ANTENNA_SELECT_C >> 16);
+}
+
+static void rtl8xxxu_tx(struct ieee80211_hw *hw,
+			struct ieee80211_tx_control *control,
+			struct sk_buff *skb)
+{
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
+	struct rtl8xxxu_priv *priv = hw->priv;
+	struct rtl8xxxu_txdesc32 *tx_desc;
+	struct rtl8xxxu_tx_urb *tx_urb;
+	struct ieee80211_sta *sta = NULL;
+	struct ieee80211_vif *vif = tx_info->control.vif;
+	struct device *dev = &priv->udev->dev;
+	u32 queue, rts_rate;
+	u16 pktlen = skb->len;
+	int tx_desc_size = priv->fops->tx_desc_size;
+	u8 macid;
+	int ret;
+	bool ampdu_enable, sgi = false, short_preamble = false;
+
+	if (skb_headroom(skb) < tx_desc_size) {
+		dev_warn(dev,
+			 "%s: Not enough headroom (%i) for tx descriptor\n",
+			 __func__, skb_headroom(skb));
+		goto error;
+	}
+
+	if (unlikely(skb->len > (65535 - tx_desc_size))) {
+		dev_warn(dev, "%s: Trying to send over-sized skb (%i)\n",
+			 __func__, skb->len);
+		goto error;
+	}
+
+	tx_urb = rtl8xxxu_alloc_tx_urb(priv);
+	if (!tx_urb) {
+		dev_warn(dev, "%s: Unable to allocate tx urb\n", __func__);
+		goto error;
+	}
+
+	if (ieee80211_is_action(hdr->frame_control))
+		rtl8xxxu_dump_action(dev, hdr);
+
+	tx_info->rate_driver_data[0] = hw;
+
+	if (control && control->sta)
+		sta = control->sta;
+
+	queue = rtl8xxxu_queue_select(hdr, skb);
+
+	tx_desc = skb_push(skb, tx_desc_size);
+
+	memset(tx_desc, 0, tx_desc_size);
+	tx_desc->pkt_size = cpu_to_le16(pktlen);
+	tx_desc->pkt_offset = tx_desc_size;
+
+	/* These bits mean different things to the RTL8192F. */
+	if (priv->rtl_chip != RTL8192F)
+		tx_desc->txdw0 =
+			TXDESC_OWN | TXDESC_FIRST_SEGMENT | TXDESC_LAST_SEGMENT;
+	if (is_multicast_ether_addr(ieee80211_get_DA(hdr)) ||
+	    is_broadcast_ether_addr(ieee80211_get_DA(hdr)))
+		tx_desc->txdw0 |= TXDESC_BROADMULTICAST;
+
+	tx_desc->txdw1 = cpu_to_le32(queue << TXDESC_QUEUE_SHIFT);
+
+	if (tx_info->control.hw_key) {
+		switch (tx_info->control.hw_key->cipher) {
+		case WLAN_CIPHER_SUITE_WEP40:
+		case WLAN_CIPHER_SUITE_WEP104:
+		case WLAN_CIPHER_SUITE_TKIP:
+			tx_desc->txdw1 |= cpu_to_le32(TXDESC_SEC_RC4);
+			break;
+		case WLAN_CIPHER_SUITE_CCMP:
+			tx_desc->txdw1 |= cpu_to_le32(TXDESC_SEC_AES);
+			break;
+		default:
+			break;
+		}
+	}
+
+	/* (tx_info->flags & IEEE80211_TX_CTL_AMPDU) && */
+	ampdu_enable = false;
+	if (ieee80211_is_data_qos(hdr->frame_control) && sta) {
+		if (sta->deflink.ht_cap.ht_supported) {
+			u32 ampdu, val32;
+			u8 *qc = ieee80211_get_qos_ctl(hdr);
+			u8 tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK;
+
+			ampdu = (u32)sta->deflink.ht_cap.ampdu_density;
+			val32 = ampdu << TXDESC_AMPDU_DENSITY_SHIFT;
+			tx_desc->txdw2 |= cpu_to_le32(val32);
+
+			ampdu_enable = true;
+
+			if (!test_bit(tid, priv->tx_aggr_started) &&
+			    !(skb->protocol == cpu_to_be16(ETH_P_PAE)))
+				if (!ieee80211_start_tx_ba_session(sta, tid, 0))
+					set_bit(tid, priv->tx_aggr_started);
+		}
+	}
+
+	if (ieee80211_is_data_qos(hdr->frame_control) &&
+	    sta && sta->deflink.ht_cap.cap &
+	    (IEEE80211_HT_CAP_SGI_40 | IEEE80211_HT_CAP_SGI_20))
+		sgi = true;
+
+	if (sta && vif && vif->bss_conf.use_short_preamble)
+		short_preamble = true;
+
+	if (skb->len > hw->wiphy->rts_threshold)
+		tx_info->control.use_rts = true;
+
+	if (sta && vif && vif->bss_conf.use_cts_prot)
+		tx_info->control.use_cts_prot = true;
+
+	if (ampdu_enable || tx_info->control.use_rts ||
+	    tx_info->control.use_cts_prot)
+		rts_rate = DESC_RATE_24M;
+	else
+		rts_rate = 0;
+
+	macid = rtl8xxxu_get_macid(priv, sta);
+	priv->fops->fill_txdesc(hw, hdr, tx_info, tx_desc, sgi, short_preamble,
+				ampdu_enable, rts_rate, macid);
+
+	rtl8xxxu_calc_tx_desc_csum(tx_desc);
+
+	/* avoid zero checksum make tx hang */
+	if (priv->rtl_chip == RTL8710B || priv->rtl_chip == RTL8192F)
+		tx_desc->csum = ~tx_desc->csum;
+
+	usb_fill_bulk_urb(&tx_urb->urb, priv->udev, priv->pipe_out[queue],
+			  skb->data, skb->len, rtl8xxxu_tx_complete, skb);
+
+	usb_anchor_urb(&tx_urb->urb, &priv->tx_anchor);
+	ret = usb_submit_urb(&tx_urb->urb, GFP_ATOMIC);
+	if (ret) {
+		usb_unanchor_urb(&tx_urb->urb);
+		rtl8xxxu_free_tx_urb(priv, tx_urb);
+		goto error;
+	}
+	return;
+error:
+	dev_kfree_skb(skb);
+}
+
+static void rtl8xxxu_send_beacon_frame(struct ieee80211_hw *hw,
+				       struct ieee80211_vif *vif)
+{
+	struct rtl8xxxu_priv *priv = hw->priv;
+	struct sk_buff *skb = ieee80211_beacon_get(hw, vif, 0);
+	struct device *dev = &priv->udev->dev;
+	int retry;
+	u8 val8;
+
+	/* BCN_VALID, write 1 to clear, cleared by SW */
+	val8 = rtl8xxxu_read8(priv, REG_TDECTRL + 2);
+	val8 |= BIT_BCN_VALID >> 16;
+	rtl8xxxu_write8(priv, REG_TDECTRL + 2, val8);
+
+	/* SW_BCN_SEL - Port0 */
+	val8 = rtl8xxxu_read8(priv, REG_DWBCN1_CTRL_8723B + 2);
+	val8 &= ~(BIT_SW_BCN_SEL >> 16);
+	rtl8xxxu_write8(priv, REG_DWBCN1_CTRL_8723B + 2, val8);
+
+	if (skb)
+		rtl8xxxu_tx(hw, NULL, skb);
+
+	retry = 100;
+	do {
+		val8 = rtl8xxxu_read8(priv, REG_TDECTRL + 2);
+		if (val8 & (BIT_BCN_VALID >> 16))
+			break;
+		usleep_range(10, 20);
+	} while (--retry);
+
+	if (!retry)
+		dev_err(dev, "%s: Failed to read beacon valid bit\n", __func__);
+}
+
+static void rtl8xxxu_update_beacon_work_callback(struct work_struct *work)
+{
+	struct rtl8xxxu_priv *priv =
+		container_of(work, struct rtl8xxxu_priv, update_beacon_work);
+	struct ieee80211_hw *hw = priv->hw;
+	struct ieee80211_vif *vif = priv->vif;
+
+	if (!vif) {
+		WARN_ONCE(true, "no vif to update beacon\n");
+		return;
+	}
+
+	rtl8xxxu_send_beacon_frame(hw, vif);
+}
+
+void rtl8723au_rx_parse_phystats(struct rtl8xxxu_priv *priv,
+				 struct ieee80211_rx_status *rx_status,
+				 struct rtl8723au_phy_stats *phy_stats,
+				 u32 rxmcs, struct ieee80211_hdr *hdr,
+				 bool crc_icv_err)
+{
+	if (phy_stats->sgi_en)
+		rx_status->enc_flags |= RX_ENC_FLAG_SHORT_GI;
+
+	if (rxmcs < DESC_RATE_6M) {
+		/*
+		 * Handle PHY stats for CCK rates
+		 */
+		rx_status->signal = priv->fops->cck_rssi(priv, phy_stats);
+	} else {
+		bool parse_cfo = priv->fops->set_crystal_cap &&
+				 priv->vif &&
+				 priv->vif->type == NL80211_IFTYPE_STATION &&
+				 priv->vif->cfg.assoc &&
+				 !crc_icv_err &&
+				 !ieee80211_is_ctl(hdr->frame_control) &&
+				 ether_addr_equal(priv->vif->bss_conf.bssid, hdr->addr2);
+
+		if (parse_cfo) {
+			priv->cfo_tracking.cfo_tail[0] = phy_stats->path_cfotail[0];
+			priv->cfo_tracking.cfo_tail[1] = phy_stats->path_cfotail[1];
+
+			priv->cfo_tracking.packet_count++;
+		}
+
+		rx_status->signal =
+			(phy_stats->cck_sig_qual_ofdm_pwdb_all >> 1) - 110;
+	}
+}
+
+static void jaguar2_rx_parse_phystats_type0(struct rtl8xxxu_priv *priv,
+					    struct ieee80211_rx_status *rx_status,
+					    struct jaguar2_phy_stats_type0 *phy_stats0,
+					    u32 rxmcs, struct ieee80211_hdr *hdr,
+					    bool crc_icv_err)
+{
+	s8 rx_power = phy_stats0->pwdb - 110;
+
+	if (!priv->cck_new_agc)
+		rx_power = priv->fops->cck_rssi(priv, (struct rtl8723au_phy_stats *)phy_stats0);
+
+	rx_status->signal = rx_power;
+}
+
+static void jaguar2_rx_parse_phystats_type1(struct rtl8xxxu_priv *priv,
+					    struct ieee80211_rx_status *rx_status,
+					    struct jaguar2_phy_stats_type1 *phy_stats1,
+					    u32 rxmcs, struct ieee80211_hdr *hdr,
+					    bool crc_icv_err)
+{
+	bool parse_cfo = priv->fops->set_crystal_cap &&
+			 priv->vif &&
+			 priv->vif->type == NL80211_IFTYPE_STATION &&
+			 priv->vif->cfg.assoc &&
+			 !crc_icv_err &&
+			 !ieee80211_is_ctl(hdr->frame_control) &&
+			 ether_addr_equal(priv->vif->bss_conf.bssid, hdr->addr2);
+	u8 pwdb_max = 0;
+	int rx_path;
+
+	if (parse_cfo) {
+		/* Only path-A and path-B have CFO tail and short CFO */
+		priv->cfo_tracking.cfo_tail[RF_A] = phy_stats1->cfo_tail[RF_A];
+		priv->cfo_tracking.cfo_tail[RF_B] = phy_stats1->cfo_tail[RF_B];
+
+		priv->cfo_tracking.packet_count++;
+	}
+
+	for (rx_path = 0; rx_path < priv->rx_paths; rx_path++)
+		pwdb_max = max(pwdb_max, phy_stats1->pwdb[rx_path]);
+
+	rx_status->signal = pwdb_max - 110;
+}
+
+static void jaguar2_rx_parse_phystats_type2(struct rtl8xxxu_priv *priv,
+					    struct ieee80211_rx_status *rx_status,
+					    struct jaguar2_phy_stats_type2 *phy_stats2,
+					    u32 rxmcs, struct ieee80211_hdr *hdr,
+					    bool crc_icv_err)
+{
+	u8 pwdb_max = 0;
+	int rx_path;
+
+	for (rx_path = 0; rx_path < priv->rx_paths; rx_path++)
+		pwdb_max = max(pwdb_max, phy_stats2->pwdb[rx_path]);
+
+	rx_status->signal = pwdb_max - 110;
+}
+
+void jaguar2_rx_parse_phystats(struct rtl8xxxu_priv *priv,
+			       struct ieee80211_rx_status *rx_status,
+			       struct rtl8723au_phy_stats *phy_stats,
+			       u32 rxmcs, struct ieee80211_hdr *hdr,
+			       bool crc_icv_err)
+{
+	struct jaguar2_phy_stats_type0 *phy_stats0 = (struct jaguar2_phy_stats_type0 *)phy_stats;
+	struct jaguar2_phy_stats_type1 *phy_stats1 = (struct jaguar2_phy_stats_type1 *)phy_stats;
+	struct jaguar2_phy_stats_type2 *phy_stats2 = (struct jaguar2_phy_stats_type2 *)phy_stats;
+
+	switch (phy_stats0->page_num) {
+	case 0:
+		/* CCK */
+		jaguar2_rx_parse_phystats_type0(priv, rx_status, phy_stats0,
+						rxmcs, hdr, crc_icv_err);
+		break;
+	case 1:
+		/* OFDM */
+		jaguar2_rx_parse_phystats_type1(priv, rx_status, phy_stats1,
+						rxmcs, hdr, crc_icv_err);
+		break;
+	case 2:
+		/* Also OFDM but different (how?) */
+		jaguar2_rx_parse_phystats_type2(priv, rx_status, phy_stats2,
+						rxmcs, hdr, crc_icv_err);
+		break;
+	default:
+		return;
+	}
+}
+
+static void rtl8xxxu_free_rx_resources(struct rtl8xxxu_priv *priv)
+{
+	struct rtl8xxxu_rx_urb *rx_urb, *tmp;
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->rx_urb_lock, flags);
+
+	list_for_each_entry_safe(rx_urb, tmp,
+				 &priv->rx_urb_pending_list, list) {
+		list_del(&rx_urb->list);
+		priv->rx_urb_pending_count--;
+		usb_free_urb(&rx_urb->urb);
+	}
+
+	spin_unlock_irqrestore(&priv->rx_urb_lock, flags);
+}
+
+static void rtl8xxxu_queue_rx_urb(struct rtl8xxxu_priv *priv,
+				  struct rtl8xxxu_rx_urb *rx_urb)
+{
+	struct sk_buff *skb;
+	unsigned long flags;
+	int pending = 0;
+
+	spin_lock_irqsave(&priv->rx_urb_lock, flags);
+
+	if (!priv->shutdown) {
+		list_add_tail(&rx_urb->list, &priv->rx_urb_pending_list);
+		priv->rx_urb_pending_count++;
+		pending = priv->rx_urb_pending_count;
+	} else {
+		skb = (struct sk_buff *)rx_urb->urb.context;
+		dev_kfree_skb_irq(skb);
+		usb_free_urb(&rx_urb->urb);
+	}
+
+	spin_unlock_irqrestore(&priv->rx_urb_lock, flags);
+
+	if (pending > RTL8XXXU_RX_URB_PENDING_WATER)
+		schedule_work(&priv->rx_urb_wq);
+}
+
+static void rtl8xxxu_rx_urb_work(struct work_struct *work)
+{
+	struct rtl8xxxu_priv *priv;
+	struct rtl8xxxu_rx_urb *rx_urb, *tmp;
+	struct list_head local;
+	struct sk_buff *skb;
+	unsigned long flags;
+	int ret;
+
+	priv = container_of(work, struct rtl8xxxu_priv, rx_urb_wq);
+	INIT_LIST_HEAD(&local);
+
+	spin_lock_irqsave(&priv->rx_urb_lock, flags);
+
+	list_splice_init(&priv->rx_urb_pending_list, &local);
+	priv->rx_urb_pending_count = 0;
+
+	spin_unlock_irqrestore(&priv->rx_urb_lock, flags);
+
+	list_for_each_entry_safe(rx_urb, tmp, &local, list) {
+		list_del_init(&rx_urb->list);
+		ret = rtl8xxxu_submit_rx_urb(priv, rx_urb);
+		/*
+		 * If out of memory or temporary error, put it back on the
+		 * queue and try again. Otherwise the device is dead/gone
+		 * and we should drop it.
+		 */
+		switch (ret) {
+		case 0:
+			break;
+		case -ENOMEM:
+		case -EAGAIN:
+			rtl8xxxu_queue_rx_urb(priv, rx_urb);
+			break;
+		default:
+			dev_warn(&priv->udev->dev,
+				 "failed to requeue urb with error %i\n", ret);
+			skb = (struct sk_buff *)rx_urb->urb.context;
+			dev_kfree_skb(skb);
+			usb_free_urb(&rx_urb->urb);
+		}
+	}
+}
+
+/*
+ * The RTL8723BU/RTL8192EU vendor driver use coexistence table type
+ * 0-7 to represent writing different combinations of register values
+ * to REG_BT_COEX_TABLEs. It's for different kinds of coexistence use
+ * cases which Realtek doesn't provide detail for these settings. Keep
+ * this aligned with vendor driver for easier maintenance.
+ */
+static
+void rtl8723bu_set_coex_with_type(struct rtl8xxxu_priv *priv, u8 type)
+{
+	switch (type) {
+	case 0:
+		rtl8xxxu_write32(priv, REG_BT_COEX_TABLE1, 0x55555555);
+		rtl8xxxu_write32(priv, REG_BT_COEX_TABLE2, 0x55555555);
+		rtl8xxxu_write32(priv, REG_BT_COEX_TABLE3, 0x00ffffff);
+		rtl8xxxu_write8(priv, REG_BT_COEX_TABLE4, 0x03);
+		break;
+	case 1:
+	case 3:
+		rtl8xxxu_write32(priv, REG_BT_COEX_TABLE1, 0x55555555);
+		rtl8xxxu_write32(priv, REG_BT_COEX_TABLE2, 0x5a5a5a5a);
+		rtl8xxxu_write32(priv, REG_BT_COEX_TABLE3, 0x00ffffff);
+		rtl8xxxu_write8(priv, REG_BT_COEX_TABLE4, 0x03);
+		break;
+	case 2:
+		rtl8xxxu_write32(priv, REG_BT_COEX_TABLE1, 0x5a5a5a5a);
+		rtl8xxxu_write32(priv, REG_BT_COEX_TABLE2, 0x5a5a5a5a);
+		rtl8xxxu_write32(priv, REG_BT_COEX_TABLE3, 0x00ffffff);
+		rtl8xxxu_write8(priv, REG_BT_COEX_TABLE4, 0x03);
+		break;
+	case 4:
+		rtl8xxxu_write32(priv, REG_BT_COEX_TABLE1, 0x5a5a5a5a);
+		rtl8xxxu_write32(priv, REG_BT_COEX_TABLE2, 0xaaaa5a5a);
+		rtl8xxxu_write32(priv, REG_BT_COEX_TABLE3, 0x00ffffff);
+		rtl8xxxu_write8(priv, REG_BT_COEX_TABLE4, 0x03);
+		break;
+	case 5:
+		rtl8xxxu_write32(priv, REG_BT_COEX_TABLE1, 0x5a5a5a5a);
+		rtl8xxxu_write32(priv, REG_BT_COEX_TABLE2, 0xaa5a5a5a);
+		rtl8xxxu_write32(priv, REG_BT_COEX_TABLE3, 0x00ffffff);
+		rtl8xxxu_write8(priv, REG_BT_COEX_TABLE4, 0x03);
+		break;
+	case 6:
+		rtl8xxxu_write32(priv, REG_BT_COEX_TABLE1, 0x55555555);
+		rtl8xxxu_write32(priv, REG_BT_COEX_TABLE2, 0xaaaaaaaa);
+		rtl8xxxu_write32(priv, REG_BT_COEX_TABLE3, 0x00ffffff);
+		rtl8xxxu_write8(priv, REG_BT_COEX_TABLE4, 0x03);
+		break;
+	case 7:
+		rtl8xxxu_write32(priv, REG_BT_COEX_TABLE1, 0xaaaaaaaa);
+		rtl8xxxu_write32(priv, REG_BT_COEX_TABLE2, 0xaaaaaaaa);
+		rtl8xxxu_write32(priv, REG_BT_COEX_TABLE3, 0x00ffffff);
+		rtl8xxxu_write8(priv, REG_BT_COEX_TABLE4, 0x03);
+		break;
+	default:
+		break;
+	}
+}
+
+static
+void rtl8723bu_update_bt_link_info(struct rtl8xxxu_priv *priv, u8 bt_info)
+{
+	struct rtl8xxxu_btcoex *btcoex = &priv->bt_coex;
+
+	if (bt_info & BT_INFO_8723B_1ANT_B_INQ_PAGE)
+		btcoex->c2h_bt_inquiry = true;
+	else
+		btcoex->c2h_bt_inquiry = false;
+
+	if (!(bt_info & BT_INFO_8723B_1ANT_B_CONNECTION)) {
+		btcoex->bt_status = BT_8723B_1ANT_STATUS_NON_CONNECTED_IDLE;
+		btcoex->has_sco = false;
+		btcoex->has_hid = false;
+		btcoex->has_pan = false;
+		btcoex->has_a2dp = false;
+	} else {
+		if ((bt_info & 0x1f) == BT_INFO_8723B_1ANT_B_CONNECTION)
+			btcoex->bt_status = BT_8723B_1ANT_STATUS_CONNECTED_IDLE;
+		else if ((bt_info & BT_INFO_8723B_1ANT_B_SCO_ESCO) ||
+			 (bt_info & BT_INFO_8723B_1ANT_B_SCO_BUSY))
+			btcoex->bt_status = BT_8723B_1ANT_STATUS_SCO_BUSY;
+		else if (bt_info & BT_INFO_8723B_1ANT_B_ACL_BUSY)
+			btcoex->bt_status = BT_8723B_1ANT_STATUS_ACL_BUSY;
+		else
+			btcoex->bt_status = BT_8723B_1ANT_STATUS_MAX;
+
+		if (bt_info & BT_INFO_8723B_1ANT_B_FTP)
+			btcoex->has_pan = true;
+		else
+			btcoex->has_pan = false;
+
+		if (bt_info & BT_INFO_8723B_1ANT_B_A2DP)
+			btcoex->has_a2dp = true;
+		else
+			btcoex->has_a2dp = false;
+
+		if (bt_info & BT_INFO_8723B_1ANT_B_HID)
+			btcoex->has_hid = true;
+		else
+			btcoex->has_hid = false;
+
+		if (bt_info & BT_INFO_8723B_1ANT_B_SCO_ESCO)
+			btcoex->has_sco = true;
+		else
+			btcoex->has_sco = false;
+	}
+
+	if (!btcoex->has_a2dp && !btcoex->has_sco &&
+	    !btcoex->has_pan && btcoex->has_hid)
+		btcoex->hid_only = true;
+	else
+		btcoex->hid_only = false;
+
+	if (!btcoex->has_sco && !btcoex->has_pan &&
+	    !btcoex->has_hid && btcoex->has_a2dp)
+		btcoex->has_a2dp = true;
+	else
+		btcoex->has_a2dp = false;
+
+	if (btcoex->bt_status == BT_8723B_1ANT_STATUS_SCO_BUSY ||
+	    btcoex->bt_status == BT_8723B_1ANT_STATUS_ACL_BUSY)
+		btcoex->bt_busy = true;
+	else
+		btcoex->bt_busy = false;
+}
+
+static
+void rtl8723bu_handle_bt_inquiry(struct rtl8xxxu_priv *priv)
+{
+	struct ieee80211_vif *vif;
+	struct rtl8xxxu_btcoex *btcoex;
+	bool wifi_connected;
+
+	vif = priv->vif;
+	btcoex = &priv->bt_coex;
+	wifi_connected = (vif && vif->cfg.assoc);
+
+	if (!wifi_connected) {
+		rtl8723bu_set_ps_tdma(priv, 0x8, 0x0, 0x0, 0x0, 0x0);
+		rtl8723bu_set_coex_with_type(priv, 0);
+	} else if (btcoex->has_sco || btcoex->has_hid || btcoex->has_a2dp) {
+		rtl8723bu_set_ps_tdma(priv, 0x61, 0x35, 0x3, 0x11, 0x11);
+		rtl8723bu_set_coex_with_type(priv, 4);
+	} else if (btcoex->has_pan) {
+		rtl8723bu_set_ps_tdma(priv, 0x61, 0x3f, 0x3, 0x11, 0x11);
+		rtl8723bu_set_coex_with_type(priv, 4);
+	} else {
+		rtl8723bu_set_ps_tdma(priv, 0x8, 0x0, 0x0, 0x0, 0x0);
+		rtl8723bu_set_coex_with_type(priv, 7);
+	}
+}
+
+static
+void rtl8723bu_handle_bt_info(struct rtl8xxxu_priv *priv)
+{
+	struct ieee80211_vif *vif;
+	struct rtl8xxxu_btcoex *btcoex;
+	bool wifi_connected;
+
+	vif = priv->vif;
+	btcoex = &priv->bt_coex;
+	wifi_connected = (vif && vif->cfg.assoc);
+
+	if (wifi_connected) {
+		u32 val32 = 0;
+		u32 high_prio_tx = 0, high_prio_rx = 0;
+
+		val32 = rtl8xxxu_read32(priv, 0x770);
+		high_prio_tx = val32 & 0x0000ffff;
+		high_prio_rx = (val32  & 0xffff0000) >> 16;
+
+		if (btcoex->bt_busy) {
+			if (btcoex->hid_only) {
+				rtl8723bu_set_ps_tdma(priv, 0x61, 0x20,
+						      0x3, 0x11, 0x11);
+				rtl8723bu_set_coex_with_type(priv, 5);
+			} else if (btcoex->a2dp_only) {
+				rtl8723bu_set_ps_tdma(priv, 0x61, 0x35,
+						      0x3, 0x11, 0x11);
+				rtl8723bu_set_coex_with_type(priv, 4);
+			} else if ((btcoex->has_a2dp && btcoex->has_pan) ||
+				   (btcoex->has_hid && btcoex->has_a2dp &&
+				    btcoex->has_pan)) {
+				rtl8723bu_set_ps_tdma(priv, 0x51, 0x21,
+						      0x3, 0x10, 0x10);
+				rtl8723bu_set_coex_with_type(priv, 4);
+			} else if (btcoex->has_hid && btcoex->has_a2dp) {
+				rtl8723bu_set_ps_tdma(priv, 0x51, 0x21,
+						      0x3, 0x10, 0x10);
+				rtl8723bu_set_coex_with_type(priv, 3);
+			} else {
+				rtl8723bu_set_ps_tdma(priv, 0x61, 0x35,
+						      0x3, 0x11, 0x11);
+				rtl8723bu_set_coex_with_type(priv, 4);
+			}
+		} else {
+			rtl8723bu_set_ps_tdma(priv, 0x8, 0x0, 0x0, 0x0, 0x0);
+			if (high_prio_tx + high_prio_rx <= 60)
+				rtl8723bu_set_coex_with_type(priv, 2);
+			else
+				rtl8723bu_set_coex_with_type(priv, 7);
+		}
+	} else {
+		rtl8723bu_set_ps_tdma(priv, 0x8, 0x0, 0x0, 0x0, 0x0);
+		rtl8723bu_set_coex_with_type(priv, 0);
+	}
+}
+
+static void rtl8xxxu_c2hcmd_callback(struct work_struct *work)
+{
+	struct rtl8xxxu_priv *priv;
+	struct rtl8723bu_c2h *c2h;
+	struct sk_buff *skb = NULL;
+	u8 bt_info = 0;
+	struct rtl8xxxu_btcoex *btcoex;
+	struct rtl8xxxu_ra_report *rarpt;
+	u8 bw;
+
+	priv = container_of(work, struct rtl8xxxu_priv, c2hcmd_work);
+	btcoex = &priv->bt_coex;
+	rarpt = &priv->ra_report;
+
+	while (!skb_queue_empty(&priv->c2hcmd_queue)) {
+		skb = skb_dequeue(&priv->c2hcmd_queue);
+
+		c2h = (struct rtl8723bu_c2h *)skb->data;
+
+		switch (c2h->id) {
+		case C2H_8723B_BT_INFO:
+			bt_info = c2h->bt_info.bt_info;
+
+			rtl8723bu_update_bt_link_info(priv, bt_info);
+			if (btcoex->c2h_bt_inquiry) {
+				rtl8723bu_handle_bt_inquiry(priv);
+				break;
+			}
+			rtl8723bu_handle_bt_info(priv);
+			break;
+		case C2H_8723B_RA_REPORT:
+			bw = rarpt->txrate.bw;
+
+			if (skb->len >= offsetofend(typeof(*c2h), ra_report.bw)) {
+				if (c2h->ra_report.bw == RTL8XXXU_CHANNEL_WIDTH_40)
+					bw = RATE_INFO_BW_40;
+				else
+					bw = RATE_INFO_BW_20;
+			}
+
+			rtl8xxxu_update_ra_report(rarpt, c2h->ra_report.rate,
+						  c2h->ra_report.sgi, bw);
+			break;
+		default:
+			break;
+		}
+
+		dev_kfree_skb(skb);
+	}
+}
+
+static void rtl8723bu_handle_c2h(struct rtl8xxxu_priv *priv,
+				 struct sk_buff *skb)
+{
+	struct rtl8723bu_c2h *c2h = (struct rtl8723bu_c2h *)skb->data;
+	struct device *dev = &priv->udev->dev;
+	int len;
+
+	len = skb->len - 2;
+
+	dev_dbg(dev, "C2H ID %02x seq %02x, len %02x source %02x\n",
+		c2h->id, c2h->seq, len, c2h->bt_info.response_source);
+
+	switch(c2h->id) {
+	case C2H_8723B_BT_INFO:
+		if (c2h->bt_info.response_source >
+		    BT_INFO_SRC_8723B_BT_ACTIVE_SEND)
+			dev_dbg(dev, "C2H_BT_INFO WiFi only firmware\n");
+		else
+			dev_dbg(dev, "C2H_BT_INFO BT/WiFi coexist firmware\n");
+
+		if (c2h->bt_info.bt_has_reset)
+			dev_dbg(dev, "BT has been reset\n");
+		if (c2h->bt_info.tx_rx_mask)
+			dev_dbg(dev, "BT TRx mask\n");
+
+		break;
+	case C2H_8723B_BT_MP_INFO:
+		dev_dbg(dev, "C2H_MP_INFO ext ID %02x, status %02x\n",
+			c2h->bt_mp_info.ext_id, c2h->bt_mp_info.status);
+		break;
+	case C2H_8723B_RA_REPORT:
+		dev_dbg(dev,
+			"C2H RA RPT: rate %02x, unk %i, macid %02x, noise %i\n",
+			c2h->ra_report.rate, c2h->ra_report.sgi,
+			c2h->ra_report.macid, c2h->ra_report.noisy_state);
+		break;
+	default:
+		dev_info(dev, "Unhandled C2H event %02x seq %02x\n",
+			 c2h->id, c2h->seq);
+		print_hex_dump(KERN_INFO, "C2H content: ", DUMP_PREFIX_NONE,
+			       16, 1, c2h->raw.payload, len, false);
+		break;
+	}
+
+	skb_queue_tail(&priv->c2hcmd_queue, skb);
+
+	schedule_work(&priv->c2hcmd_work);
+}
+
+static void rtl8188e_c2hcmd_callback(struct work_struct *work)
+{
+	struct rtl8xxxu_priv *priv = container_of(work, struct rtl8xxxu_priv, c2hcmd_work);
+	struct device *dev = &priv->udev->dev;
+	struct sk_buff *skb = NULL;
+	struct rtl8xxxu_rxdesc16 *rx_desc;
+
+	while (!skb_queue_empty(&priv->c2hcmd_queue)) {
+		skb = skb_dequeue(&priv->c2hcmd_queue);
+
+		rx_desc = (struct rtl8xxxu_rxdesc16 *)(skb->data - sizeof(struct rtl8xxxu_rxdesc16));
+
+		switch (rx_desc->rpt_sel) {
+		case 1:
+			dev_dbg(dev, "C2H TX report type 1\n");
+
+			break;
+		case 2:
+			dev_dbg(dev, "C2H TX report type 2\n");
+
+			rtl8188e_handle_ra_tx_report2(priv, skb);
+
+			break;
+		case 3:
+			dev_dbg(dev, "C2H USB interrupt report\n");
+
+			break;
+		default:
+			dev_warn(dev, "%s: rpt_sel should not be %d\n",
+				 __func__, rx_desc->rpt_sel);
+
+			break;
+		}
+
+		dev_kfree_skb(skb);
+	}
+}
+
+int rtl8xxxu_parse_rxdesc16(struct rtl8xxxu_priv *priv, struct sk_buff *skb)
+{
+	struct ieee80211_hw *hw = priv->hw;
+	struct ieee80211_rx_status *rx_status;
+	struct rtl8xxxu_rxdesc16 *rx_desc;
+	struct rtl8723au_phy_stats *phy_stats;
+	struct sk_buff *next_skb = NULL;
+	__le32 *_rx_desc_le;
+	u32 *_rx_desc;
+	int drvinfo_sz, desc_shift;
+	int i, pkt_cnt, pkt_len, urb_len, pkt_offset;
+
+	urb_len = skb->len;
+	pkt_cnt = 0;
+
+	if (urb_len < sizeof(struct rtl8xxxu_rxdesc16)) {
+		kfree_skb(skb);
+		return RX_TYPE_ERROR;
+	}
+
+	do {
+		rx_desc = (struct rtl8xxxu_rxdesc16 *)skb->data;
+		_rx_desc_le = (__le32 *)skb->data;
+		_rx_desc = (u32 *)skb->data;
+
+		for (i = 0;
+		     i < (sizeof(struct rtl8xxxu_rxdesc16) / sizeof(u32)); i++)
+			_rx_desc[i] = le32_to_cpu(_rx_desc_le[i]);
+
+		/*
+		 * Only read pkt_cnt from the header if we're parsing the
+		 * first packet
+		 */
+		if (!pkt_cnt)
+			pkt_cnt = rx_desc->pkt_cnt;
+		pkt_len = rx_desc->pktlen;
+
+		drvinfo_sz = rx_desc->drvinfo_sz * 8;
+		desc_shift = rx_desc->shift;
+		pkt_offset = roundup(pkt_len + drvinfo_sz + desc_shift +
+				     sizeof(struct rtl8xxxu_rxdesc16), 128);
+
+		/*
+		 * Only clone the skb if there's enough data at the end to
+		 * at least cover the rx descriptor
+		 */
+		if (pkt_cnt > 1 &&
+		    urb_len >= (pkt_offset + sizeof(struct rtl8xxxu_rxdesc16)))
+			next_skb = skb_clone(skb, GFP_ATOMIC);
+
+		rx_status = IEEE80211_SKB_RXCB(skb);
+		memset(rx_status, 0, sizeof(struct ieee80211_rx_status));
+
+		skb_pull(skb, sizeof(struct rtl8xxxu_rxdesc16));
+
+		if (rx_desc->rpt_sel) {
+			skb_queue_tail(&priv->c2hcmd_queue, skb);
+			schedule_work(&priv->c2hcmd_work);
+		} else {
+			phy_stats = (struct rtl8723au_phy_stats *)skb->data;
+
+			skb_pull(skb, drvinfo_sz + desc_shift);
+
+			skb_trim(skb, pkt_len);
+
+			if (rx_desc->phy_stats)
+				priv->fops->parse_phystats(
+					priv, rx_status, phy_stats,
+					rx_desc->rxmcs,
+					(struct ieee80211_hdr *)skb->data,
+					rx_desc->crc32 || rx_desc->icverr);
+
+			rx_status->mactime = rx_desc->tsfl;
+			rx_status->flag |= RX_FLAG_MACTIME_START;
+
+			if (!rx_desc->swdec)
+				rx_status->flag |= RX_FLAG_DECRYPTED;
+			if (rx_desc->crc32)
+				rx_status->flag |= RX_FLAG_FAILED_FCS_CRC;
+			if (rx_desc->bw)
+				rx_status->bw = RATE_INFO_BW_40;
+
+			if (rx_desc->rxht) {
+				rx_status->encoding = RX_ENC_HT;
+				rx_status->rate_idx = rx_desc->rxmcs - DESC_RATE_MCS0;
+			} else {
+				rx_status->rate_idx = rx_desc->rxmcs;
+			}
+
+			rx_status->freq = hw->conf.chandef.chan->center_freq;
+			rx_status->band = hw->conf.chandef.chan->band;
+
+			ieee80211_rx_irqsafe(hw, skb);
+		}
+
+		skb = next_skb;
+		if (skb)
+			skb_pull(next_skb, pkt_offset);
+
+		pkt_cnt--;
+		urb_len -= pkt_offset;
+		next_skb = NULL;
+	} while (skb && pkt_cnt > 0 &&
+		 urb_len >= sizeof(struct rtl8xxxu_rxdesc16));
+
+	return RX_TYPE_DATA_PKT;
+}
+
+int rtl8xxxu_parse_rxdesc24(struct rtl8xxxu_priv *priv, struct sk_buff *skb)
+{
+	struct ieee80211_hw *hw = priv->hw;
+	struct ieee80211_rx_status *rx_status;
+	struct rtl8xxxu_rxdesc24 *rx_desc;
+	struct rtl8723au_phy_stats *phy_stats;
+	struct sk_buff *next_skb = NULL;
+	__le32 *_rx_desc_le;
+	u32 *_rx_desc;
+	int drvinfo_sz, desc_shift;
+	int i, pkt_len, urb_len, pkt_offset;
+
+	urb_len = skb->len;
+
+	if (urb_len < sizeof(struct rtl8xxxu_rxdesc24)) {
+		kfree_skb(skb);
+		return RX_TYPE_ERROR;
+	}
+
+	do {
+		rx_desc = (struct rtl8xxxu_rxdesc24 *)skb->data;
+		_rx_desc_le = (__le32 *)skb->data;
+		_rx_desc = (u32 *)skb->data;
+
+		for (i = 0; i < (sizeof(struct rtl8xxxu_rxdesc24) / sizeof(u32)); i++)
+			_rx_desc[i] = le32_to_cpu(_rx_desc_le[i]);
+
+		pkt_len = rx_desc->pktlen;
+
+		drvinfo_sz = rx_desc->drvinfo_sz * 8;
+		desc_shift = rx_desc->shift;
+		pkt_offset = roundup(pkt_len + drvinfo_sz + desc_shift +
+				     sizeof(struct rtl8xxxu_rxdesc24), 8);
+
+		/*
+		 * Only clone the skb if there's enough data at the end to
+		 * at least cover the rx descriptor
+		 */
+		if (urb_len >= (pkt_offset + sizeof(struct rtl8xxxu_rxdesc24)))
+			next_skb = skb_clone(skb, GFP_ATOMIC);
+
+		rx_status = IEEE80211_SKB_RXCB(skb);
+		memset(rx_status, 0, sizeof(struct ieee80211_rx_status));
+
+		skb_pull(skb, sizeof(struct rtl8xxxu_rxdesc24));
+
+		phy_stats = (struct rtl8723au_phy_stats *)skb->data;
+
+		skb_pull(skb, drvinfo_sz + desc_shift);
+
+		skb_trim(skb, pkt_len);
+
+		if (rx_desc->rpt_sel) {
+			struct device *dev = &priv->udev->dev;
+			dev_dbg(dev, "%s: C2H packet\n", __func__);
+			rtl8723bu_handle_c2h(priv, skb);
+		} else {
+			struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+
+			if (rx_desc->phy_stats)
+				priv->fops->parse_phystats(priv, rx_status, phy_stats,
+							   rx_desc->rxmcs, hdr,
+							   rx_desc->crc32 || rx_desc->icverr);
+
+			rx_status->mactime = rx_desc->tsfl;
+			rx_status->flag |= RX_FLAG_MACTIME_START;
+
+			if (!rx_desc->swdec)
+				rx_status->flag |= RX_FLAG_DECRYPTED;
+			if (rx_desc->crc32)
+				rx_status->flag |= RX_FLAG_FAILED_FCS_CRC;
+			if (rx_desc->bw)
+				rx_status->bw = RATE_INFO_BW_40;
+
+			if (rx_desc->rxmcs >= DESC_RATE_MCS0) {
+				rx_status->encoding = RX_ENC_HT;
+				rx_status->rate_idx = rx_desc->rxmcs - DESC_RATE_MCS0;
+			} else {
+				rx_status->rate_idx = rx_desc->rxmcs;
+			}
+
+			rx_status->freq = hw->conf.chandef.chan->center_freq;
+			rx_status->band = hw->conf.chandef.chan->band;
+
+			ieee80211_rx_irqsafe(hw, skb);
+		}
+
+		skb = next_skb;
+		if (skb)
+			skb_pull(next_skb, pkt_offset);
+
+		urb_len -= pkt_offset;
+		next_skb = NULL;
+	} while (skb && urb_len >= sizeof(struct rtl8xxxu_rxdesc24));
+
+	return RX_TYPE_DATA_PKT;
+}
+
+static void rtl8xxxu_rx_complete(struct urb *urb)
+{
+	struct rtl8xxxu_rx_urb *rx_urb =
+		container_of(urb, struct rtl8xxxu_rx_urb, urb);
+	struct ieee80211_hw *hw = rx_urb->hw;
+	struct rtl8xxxu_priv *priv = hw->priv;
+	struct sk_buff *skb = (struct sk_buff *)urb->context;
+	struct device *dev = &priv->udev->dev;
+
+	skb_put(skb, urb->actual_length);
+
+	if (urb->status == 0) {
+		priv->fops->parse_rx_desc(priv, skb);
+
+		skb = NULL;
+		rx_urb->urb.context = NULL;
+		rtl8xxxu_queue_rx_urb(priv, rx_urb);
+	} else {
+		dev_dbg(dev, "%s: status %i\n",	__func__, urb->status);
+		goto cleanup;
+	}
+	return;
+
+cleanup:
+	usb_free_urb(urb);
+	dev_kfree_skb(skb);
+}
+
+static int rtl8xxxu_submit_rx_urb(struct rtl8xxxu_priv *priv,
+				  struct rtl8xxxu_rx_urb *rx_urb)
+{
+	struct rtl8xxxu_fileops *fops = priv->fops;
+	struct sk_buff *skb;
+	int skb_size;
+	int ret, rx_desc_sz;
+
+	rx_desc_sz = fops->rx_desc_size;
+
+	if (priv->rx_buf_aggregation && fops->rx_agg_buf_size) {
+		skb_size = fops->rx_agg_buf_size;
+		skb_size += (rx_desc_sz + sizeof(struct rtl8723au_phy_stats));
+	} else {
+		skb_size = IEEE80211_MAX_FRAME_LEN;
+	}
+
+	skb = __netdev_alloc_skb(NULL, skb_size, GFP_KERNEL);
+	if (!skb)
+		return -ENOMEM;
+
+	memset(skb->data, 0, rx_desc_sz);
+	usb_fill_bulk_urb(&rx_urb->urb, priv->udev, priv->pipe_in, skb->data,
+			  skb_size, rtl8xxxu_rx_complete, skb);
+	usb_anchor_urb(&rx_urb->urb, &priv->rx_anchor);
+	ret = usb_submit_urb(&rx_urb->urb, GFP_ATOMIC);
+	if (ret)
+		usb_unanchor_urb(&rx_urb->urb);
+	return ret;
+}
+
+static void rtl8xxxu_int_complete(struct urb *urb)
+{
+	struct rtl8xxxu_priv *priv = (struct rtl8xxxu_priv *)urb->context;
+	struct device *dev = &priv->udev->dev;
+	int ret;
+
+	if (rtl8xxxu_debug & RTL8XXXU_DEBUG_INTERRUPT)
+		dev_dbg(dev, "%s: status %i\n", __func__, urb->status);
+	if (urb->status == 0) {
+		usb_anchor_urb(urb, &priv->int_anchor);
+		ret = usb_submit_urb(urb, GFP_ATOMIC);
+		if (ret)
+			usb_unanchor_urb(urb);
+	} else {
+		dev_dbg(dev, "%s: Error %i\n", __func__, urb->status);
+	}
+}
+
+
+static int rtl8xxxu_submit_int_urb(struct ieee80211_hw *hw)
+{
+	struct rtl8xxxu_priv *priv = hw->priv;
+	struct urb *urb;
+	u32 val32;
+	int ret;
+
+	urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!urb)
+		return -ENOMEM;
+
+	usb_fill_int_urb(urb, priv->udev, priv->pipe_interrupt,
+			 priv->int_buf, USB_INTR_CONTENT_LENGTH,
+			 rtl8xxxu_int_complete, priv, 1);
+	usb_anchor_urb(urb, &priv->int_anchor);
+	ret = usb_submit_urb(urb, GFP_KERNEL);
+	if (ret) {
+		usb_unanchor_urb(urb);
+		goto error;
+	}
+
+	val32 = rtl8xxxu_read32(priv, REG_USB_HIMR);
+	val32 |= USB_HIMR_CPWM;
+	rtl8xxxu_write32(priv, REG_USB_HIMR, val32);
+
+error:
+	usb_free_urb(urb);
+	return ret;
+}
+
+static int rtl8xxxu_add_interface(struct ieee80211_hw *hw,
+				  struct ieee80211_vif *vif)
+{
+	struct rtl8xxxu_priv *priv = hw->priv;
+	int ret;
+	u8 val8;
+
+	if (!priv->vif)
+		priv->vif = vif;
+	else
+		return -EOPNOTSUPP;
+
+	switch (vif->type) {
+	case NL80211_IFTYPE_STATION:
+		rtl8xxxu_stop_tx_beacon(priv);
+
+		val8 = rtl8xxxu_read8(priv, REG_BEACON_CTRL);
+		val8 |= BEACON_ATIM | BEACON_FUNCTION_ENABLE |
+			BEACON_DISABLE_TSF_UPDATE;
+		rtl8xxxu_write8(priv, REG_BEACON_CTRL, val8);
+		ret = 0;
+		break;
+	case NL80211_IFTYPE_AP:
+		rtl8xxxu_write8(priv, REG_BEACON_CTRL,
+				BEACON_DISABLE_TSF_UPDATE | BEACON_CTRL_MBSSID);
+		rtl8xxxu_write8(priv, REG_ATIMWND, 0x0c); /* 12ms */
+		rtl8xxxu_write16(priv, REG_TSFTR_SYN_OFFSET, 0x7fff); /* ~32ms */
+		rtl8xxxu_write8(priv, REG_DUAL_TSF_RST, DUAL_TSF_RESET_TSF0);
+
+		/* enable BCN0 function */
+		rtl8xxxu_write8(priv, REG_BEACON_CTRL,
+				BEACON_DISABLE_TSF_UPDATE |
+				BEACON_FUNCTION_ENABLE | BEACON_CTRL_MBSSID |
+				BEACON_CTRL_TX_BEACON_RPT);
+
+		/* select BCN on port 0 */
+		val8 = rtl8xxxu_read8(priv, REG_CCK_CHECK);
+		val8 &= ~BIT_BCN_PORT_SEL;
+		rtl8xxxu_write8(priv, REG_CCK_CHECK, val8);
+
+		ret = 0;
+		break;
+	default:
+		ret = -EOPNOTSUPP;
+	}
+
+	rtl8xxxu_set_linktype(priv, vif->type);
+	ether_addr_copy(priv->mac_addr, vif->addr);
+	rtl8xxxu_set_mac(priv);
+
+	return ret;
+}
+
+static void rtl8xxxu_remove_interface(struct ieee80211_hw *hw,
+				      struct ieee80211_vif *vif)
+{
+	struct rtl8xxxu_priv *priv = hw->priv;
+
+	dev_dbg(&priv->udev->dev, "%s\n", __func__);
+
+	if (priv->vif)
+		priv->vif = NULL;
+}
+
+static int rtl8xxxu_config(struct ieee80211_hw *hw, u32 changed)
+{
+	struct rtl8xxxu_priv *priv = hw->priv;
+	struct device *dev = &priv->udev->dev;
+	int ret = 0, channel;
+	bool ht40;
+
+	if (rtl8xxxu_debug & RTL8XXXU_DEBUG_CHANNEL)
+		dev_info(dev,
+			 "%s: channel: %i (changed %08x chandef.width %02x)\n",
+			 __func__, hw->conf.chandef.chan->hw_value,
+			 changed, hw->conf.chandef.width);
+
+	if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
+		switch (hw->conf.chandef.width) {
+		case NL80211_CHAN_WIDTH_20_NOHT:
+		case NL80211_CHAN_WIDTH_20:
+			ht40 = false;
+			break;
+		case NL80211_CHAN_WIDTH_40:
+			ht40 = true;
+			break;
+		default:
+			ret = -ENOTSUPP;
+			goto exit;
+		}
+
+		channel = hw->conf.chandef.chan->hw_value;
+
+		priv->fops->set_tx_power(priv, channel, ht40);
+
+		priv->fops->config_channel(hw);
+	}
+
+exit:
+	return ret;
+}
+
+static int rtl8xxxu_conf_tx(struct ieee80211_hw *hw,
+			    struct ieee80211_vif *vif,
+			    unsigned int link_id, u16 queue,
+			    const struct ieee80211_tx_queue_params *param)
+{
+	struct rtl8xxxu_priv *priv = hw->priv;
+	struct device *dev = &priv->udev->dev;
+	u32 val32;
+	u8 aifs, acm_ctrl, acm_bit;
+
+	aifs = param->aifs;
+
+	val32 = aifs |
+		fls(param->cw_min) << EDCA_PARAM_ECW_MIN_SHIFT |
+		fls(param->cw_max) << EDCA_PARAM_ECW_MAX_SHIFT |
+		(u32)param->txop << EDCA_PARAM_TXOP_SHIFT;
+
+	acm_ctrl = rtl8xxxu_read8(priv, REG_ACM_HW_CTRL);
+	dev_dbg(dev,
+		"%s: IEEE80211 queue %02x val %08x, acm %i, acm_ctrl %02x\n",
+		__func__, queue, val32, param->acm, acm_ctrl);
+
+	switch (queue) {
+	case IEEE80211_AC_VO:
+		acm_bit = ACM_HW_CTRL_VO;
+		rtl8xxxu_write32(priv, REG_EDCA_VO_PARAM, val32);
+		break;
+	case IEEE80211_AC_VI:
+		acm_bit = ACM_HW_CTRL_VI;
+		rtl8xxxu_write32(priv, REG_EDCA_VI_PARAM, val32);
+		break;
+	case IEEE80211_AC_BE:
+		acm_bit = ACM_HW_CTRL_BE;
+		rtl8xxxu_write32(priv, REG_EDCA_BE_PARAM, val32);
+		break;
+	case IEEE80211_AC_BK:
+		acm_bit = ACM_HW_CTRL_BK;
+		rtl8xxxu_write32(priv, REG_EDCA_BK_PARAM, val32);
+		break;
+	default:
+		acm_bit = 0;
+		break;
+	}
+
+	if (param->acm)
+		acm_ctrl |= acm_bit;
+	else
+		acm_ctrl &= ~acm_bit;
+	rtl8xxxu_write8(priv, REG_ACM_HW_CTRL, acm_ctrl);
+
+	return 0;
+}
+
+static void rtl8xxxu_configure_filter(struct ieee80211_hw *hw,
+				      unsigned int changed_flags,
+				      unsigned int *total_flags, u64 multicast)
+{
+	struct rtl8xxxu_priv *priv = hw->priv;
+	u32 rcr = priv->regrcr;
+
+	dev_dbg(&priv->udev->dev, "%s: changed_flags %08x, total_flags %08x\n",
+		__func__, changed_flags, *total_flags);
+
+	/*
+	 * FIF_ALLMULTI ignored as all multicast frames are accepted (REG_MAR)
+	 */
+
+	if (*total_flags & FIF_FCSFAIL)
+		rcr |= RCR_ACCEPT_CRC32;
+	else
+		rcr &= ~RCR_ACCEPT_CRC32;
+
+	/*
+	 * FIF_PLCPFAIL not supported?
+	 */
+
+	if (*total_flags & FIF_BCN_PRBRESP_PROMISC)
+		rcr &= ~(RCR_CHECK_BSSID_BEACON | RCR_CHECK_BSSID_MATCH);
+	else
+		rcr |= RCR_CHECK_BSSID_BEACON | RCR_CHECK_BSSID_MATCH;
+
+	if (priv->vif && priv->vif->type == NL80211_IFTYPE_AP)
+		rcr &= ~RCR_CHECK_BSSID_MATCH;
+
+	if (*total_flags & FIF_CONTROL)
+		rcr |= RCR_ACCEPT_CTRL_FRAME;
+	else
+		rcr &= ~RCR_ACCEPT_CTRL_FRAME;
+
+	if (*total_flags & FIF_OTHER_BSS)
+		rcr |= RCR_ACCEPT_AP;
+	else
+		rcr &= ~RCR_ACCEPT_AP;
+
+	if (*total_flags & FIF_PSPOLL)
+		rcr |= RCR_ACCEPT_PM;
+	else
+		rcr &= ~RCR_ACCEPT_PM;
+
+	/*
+	 * FIF_PROBE_REQ ignored as probe requests always seem to be accepted
+	 */
+
+	rtl8xxxu_write32(priv, REG_RCR, rcr);
+	priv->regrcr = rcr;
+
+	*total_flags &= (FIF_ALLMULTI | FIF_FCSFAIL | FIF_BCN_PRBRESP_PROMISC |
+			 FIF_CONTROL | FIF_OTHER_BSS | FIF_PSPOLL |
+			 FIF_PROBE_REQ);
+}
+
+static int rtl8xxxu_set_rts_threshold(struct ieee80211_hw *hw, u32 rts)
+{
+	if (rts > 2347 && rts != (u32)-1)
+		return -EINVAL;
+
+	return 0;
+}
+
+static int rtl8xxxu_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
+			    struct ieee80211_vif *vif,
+			    struct ieee80211_sta *sta,
+			    struct ieee80211_key_conf *key)
+{
+	struct rtl8xxxu_priv *priv = hw->priv;
+	struct device *dev = &priv->udev->dev;
+	u8 mac_addr[ETH_ALEN];
+	u8 val8;
+	u16 val16;
+	u32 val32;
+	int retval = -EOPNOTSUPP;
+
+	dev_dbg(dev, "%s: cmd %02x, cipher %08x, index %i\n",
+		__func__, cmd, key->cipher, key->keyidx);
+
+	if (vif->type != NL80211_IFTYPE_STATION)
+		return -EOPNOTSUPP;
+
+	if (key->keyidx > 3)
+		return -EOPNOTSUPP;
+
+	switch (key->cipher) {
+	case WLAN_CIPHER_SUITE_WEP40:
+	case WLAN_CIPHER_SUITE_WEP104:
+
+		break;
+	case WLAN_CIPHER_SUITE_CCMP:
+		key->flags |= IEEE80211_KEY_FLAG_SW_MGMT_TX;
+		break;
+	case WLAN_CIPHER_SUITE_TKIP:
+		key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC;
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	if (key->flags & IEEE80211_KEY_FLAG_PAIRWISE) {
+		dev_dbg(dev, "%s: pairwise key\n", __func__);
+		ether_addr_copy(mac_addr, sta->addr);
+	} else {
+		dev_dbg(dev, "%s: group key\n", __func__);
+		eth_broadcast_addr(mac_addr);
+	}
+
+	val16 = rtl8xxxu_read16(priv, REG_CR);
+	val16 |= CR_SECURITY_ENABLE;
+	rtl8xxxu_write16(priv, REG_CR, val16);
+
+	val8 = SEC_CFG_TX_SEC_ENABLE | SEC_CFG_TXBC_USE_DEFKEY |
+		SEC_CFG_RX_SEC_ENABLE | SEC_CFG_RXBC_USE_DEFKEY;
+	val8 |= SEC_CFG_TX_USE_DEFKEY | SEC_CFG_RX_USE_DEFKEY;
+	rtl8xxxu_write8(priv, REG_SECURITY_CFG, val8);
+
+	switch (cmd) {
+	case SET_KEY:
+		key->hw_key_idx = key->keyidx;
+		key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
+		rtl8xxxu_cam_write(priv, key, mac_addr);
+		retval = 0;
+		break;
+	case DISABLE_KEY:
+		rtl8xxxu_write32(priv, REG_CAM_WRITE, 0x00000000);
+		val32 = CAM_CMD_POLLING | CAM_CMD_WRITE |
+			key->keyidx << CAM_CMD_KEY_SHIFT;
+		rtl8xxxu_write32(priv, REG_CAM_CMD, val32);
+		retval = 0;
+		break;
+	default:
+		dev_warn(dev, "%s: Unsupported command %02x\n", __func__, cmd);
+	}
+
+	return retval;
+}
+
+static int
+rtl8xxxu_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+		      struct ieee80211_ampdu_params *params)
+{
+	struct rtl8xxxu_priv *priv = hw->priv;
+	struct device *dev = &priv->udev->dev;
+	u8 ampdu_factor, ampdu_density;
+	struct ieee80211_sta *sta = params->sta;
+	u16 tid = params->tid;
+	enum ieee80211_ampdu_mlme_action action = params->action;
+
+	switch (action) {
+	case IEEE80211_AMPDU_TX_START:
+		dev_dbg(dev, "%s: IEEE80211_AMPDU_TX_START\n", __func__);
+		ampdu_factor = sta->deflink.ht_cap.ampdu_factor;
+		ampdu_density = sta->deflink.ht_cap.ampdu_density;
+		rtl8xxxu_set_ampdu_factor(priv, ampdu_factor);
+		rtl8xxxu_set_ampdu_min_space(priv, ampdu_density);
+		dev_dbg(dev,
+			"Changed HT: ampdu_factor %02x, ampdu_density %02x\n",
+			ampdu_factor, ampdu_density);
+		return IEEE80211_AMPDU_TX_START_IMMEDIATE;
+	case IEEE80211_AMPDU_TX_STOP_CONT:
+	case IEEE80211_AMPDU_TX_STOP_FLUSH:
+	case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT:
+		dev_dbg(dev, "%s: IEEE80211_AMPDU_TX_STOP\n", __func__);
+		rtl8xxxu_set_ampdu_factor(priv, 0);
+		rtl8xxxu_set_ampdu_min_space(priv, 0);
+		clear_bit(tid, priv->tx_aggr_started);
+		clear_bit(tid, priv->tid_tx_operational);
+		ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid);
+		break;
+	case IEEE80211_AMPDU_TX_OPERATIONAL:
+		dev_dbg(dev, "%s: IEEE80211_AMPDU_TX_OPERATIONAL\n", __func__);
+		set_bit(tid, priv->tid_tx_operational);
+		break;
+	case IEEE80211_AMPDU_RX_START:
+		dev_dbg(dev, "%s: IEEE80211_AMPDU_RX_START\n", __func__);
+		break;
+	case IEEE80211_AMPDU_RX_STOP:
+		dev_dbg(dev, "%s: IEEE80211_AMPDU_RX_STOP\n", __func__);
+		break;
+	default:
+		break;
+	}
+	return 0;
+}
+
+static void
+rtl8xxxu_sta_statistics(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+			struct ieee80211_sta *sta, struct station_info *sinfo)
+{
+	struct rtl8xxxu_priv *priv = hw->priv;
+
+	sinfo->txrate = priv->ra_report.txrate;
+	sinfo->filled |= BIT_ULL(NL80211_STA_INFO_TX_BITRATE);
+}
+
+static u8 rtl8xxxu_signal_to_snr(int signal)
+{
+	if (signal < RTL8XXXU_NOISE_FLOOR_MIN)
+		signal = RTL8XXXU_NOISE_FLOOR_MIN;
+	else if (signal > 0)
+		signal = 0;
+	return (u8)(signal - RTL8XXXU_NOISE_FLOOR_MIN);
+}
+
+static void rtl8xxxu_refresh_rate_mask(struct rtl8xxxu_priv *priv,
+				       int signal, struct ieee80211_sta *sta,
+				       bool force)
+{
+	struct ieee80211_hw *hw = priv->hw;
+	u16 wireless_mode;
+	u8 rssi_level, ratr_idx;
+	u8 txbw_40mhz;
+	u8 snr, snr_thresh_high, snr_thresh_low;
+	u8 go_up_gap = 5;
+	u8 macid = rtl8xxxu_get_macid(priv, sta);
+
+	rssi_level = priv->rssi_level;
+	snr = rtl8xxxu_signal_to_snr(signal);
+	snr_thresh_high = RTL8XXXU_SNR_THRESH_HIGH;
+	snr_thresh_low = RTL8XXXU_SNR_THRESH_LOW;
+	txbw_40mhz = (hw->conf.chandef.width == NL80211_CHAN_WIDTH_40) ? 1 : 0;
+
+	switch (rssi_level) {
+	case RTL8XXXU_RATR_STA_MID:
+		snr_thresh_high += go_up_gap;
+		break;
+	case RTL8XXXU_RATR_STA_LOW:
+		snr_thresh_high += go_up_gap;
+		snr_thresh_low += go_up_gap;
+		break;
+	default:
+		break;
+	}
+
+	if (snr > snr_thresh_high)
+		rssi_level = RTL8XXXU_RATR_STA_HIGH;
+	else if (snr > snr_thresh_low)
+		rssi_level = RTL8XXXU_RATR_STA_MID;
+	else
+		rssi_level = RTL8XXXU_RATR_STA_LOW;
+
+	if (rssi_level != priv->rssi_level || force) {
+		int sgi = 0;
+		u32 rate_bitmap = 0;
+
+		rcu_read_lock();
+		rate_bitmap = (sta->deflink.supp_rates[0] & 0xfff) |
+				(sta->deflink.ht_cap.mcs.rx_mask[0] << 12) |
+				(sta->deflink.ht_cap.mcs.rx_mask[1] << 20);
+		if (sta->deflink.ht_cap.cap &
+		    (IEEE80211_HT_CAP_SGI_40 | IEEE80211_HT_CAP_SGI_20))
+			sgi = 1;
+		rcu_read_unlock();
+
+		wireless_mode = rtl8xxxu_wireless_mode(hw, sta);
+		switch (wireless_mode) {
+		case WIRELESS_MODE_B:
+			ratr_idx = RATEID_IDX_B;
+			if (rate_bitmap & 0x0000000c)
+				rate_bitmap &= 0x0000000d;
+			else
+				rate_bitmap &= 0x0000000f;
+			break;
+		case WIRELESS_MODE_A:
+		case WIRELESS_MODE_G:
+			ratr_idx = RATEID_IDX_G;
+			if (rssi_level == RTL8XXXU_RATR_STA_HIGH)
+				rate_bitmap &= 0x00000f00;
+			else
+				rate_bitmap &= 0x00000ff0;
+			break;
+		case (WIRELESS_MODE_B | WIRELESS_MODE_G):
+			ratr_idx = RATEID_IDX_BG;
+			if (rssi_level == RTL8XXXU_RATR_STA_HIGH)
+				rate_bitmap &= 0x00000f00;
+			else if (rssi_level == RTL8XXXU_RATR_STA_MID)
+				rate_bitmap &= 0x00000ff0;
+			else
+				rate_bitmap &= 0x00000ff5;
+			break;
+		case WIRELESS_MODE_N_24G:
+		case WIRELESS_MODE_N_5G:
+		case (WIRELESS_MODE_G | WIRELESS_MODE_N_24G):
+		case (WIRELESS_MODE_A | WIRELESS_MODE_N_5G):
+			if (priv->tx_paths == 2 && priv->rx_paths == 2)
+				ratr_idx = RATEID_IDX_GN_N2SS;
+			else
+				ratr_idx = RATEID_IDX_GN_N1SS;
+			break;
+		case (WIRELESS_MODE_B | WIRELESS_MODE_G | WIRELESS_MODE_N_24G):
+		case (WIRELESS_MODE_B | WIRELESS_MODE_N_24G):
+			if (txbw_40mhz) {
+				if (priv->tx_paths == 2 && priv->rx_paths == 2)
+					ratr_idx = RATEID_IDX_BGN_40M_2SS;
+				else
+					ratr_idx = RATEID_IDX_BGN_40M_1SS;
+			} else {
+				if (priv->tx_paths == 2 && priv->rx_paths == 2)
+					ratr_idx = RATEID_IDX_BGN_20M_2SS_BN;
+				else
+					ratr_idx = RATEID_IDX_BGN_20M_1SS_BN;
+			}
+
+			if (priv->tx_paths == 2 && priv->rx_paths == 2) {
+				if (rssi_level == RTL8XXXU_RATR_STA_HIGH) {
+					rate_bitmap &= 0x0f8f0000;
+				} else if (rssi_level == RTL8XXXU_RATR_STA_MID) {
+					rate_bitmap &= 0x0f8ff000;
+				} else {
+					if (txbw_40mhz)
+						rate_bitmap &= 0x0f8ff015;
+					else
+						rate_bitmap &= 0x0f8ff005;
+				}
+			} else {
+				if (rssi_level == RTL8XXXU_RATR_STA_HIGH) {
+					rate_bitmap &= 0x000f0000;
+				} else if (rssi_level == RTL8XXXU_RATR_STA_MID) {
+					rate_bitmap &= 0x000ff000;
+				} else {
+					if (txbw_40mhz)
+						rate_bitmap &= 0x000ff015;
+					else
+						rate_bitmap &= 0x000ff005;
+				}
+			}
+			break;
+		default:
+			ratr_idx = RATEID_IDX_BGN_40M_2SS;
+			rate_bitmap &= 0x0fffffff;
+			break;
+		}
+
+		priv->rssi_level = rssi_level;
+		priv->fops->update_rate_mask(priv, rate_bitmap, ratr_idx, sgi, txbw_40mhz, macid);
+	}
+}
+
+static void rtl8xxxu_set_atc_status(struct rtl8xxxu_priv *priv, bool atc_status)
+{
+	struct rtl8xxxu_cfo_tracking *cfo = &priv->cfo_tracking;
+	u32 val32;
+
+	if (atc_status == cfo->atc_status)
+		return;
+
+	cfo->atc_status = atc_status;
+
+	val32 = rtl8xxxu_read32(priv, REG_OFDM1_CFO_TRACKING);
+	if (atc_status)
+		val32 |= CFO_TRACKING_ATC_STATUS;
+	else
+		val32 &= ~CFO_TRACKING_ATC_STATUS;
+	rtl8xxxu_write32(priv, REG_OFDM1_CFO_TRACKING, val32);
+}
+
+/* Central frequency offset correction */
+static void rtl8xxxu_track_cfo(struct rtl8xxxu_priv *priv)
+{
+	struct rtl8xxxu_cfo_tracking *cfo = &priv->cfo_tracking;
+	int cfo_khz_a, cfo_khz_b, cfo_average;
+	int crystal_cap;
+
+	if (!priv->vif || !priv->vif->cfg.assoc) {
+		/* Reset */
+		cfo->adjust = true;
+
+		if (cfo->crystal_cap > priv->default_crystal_cap)
+			priv->fops->set_crystal_cap(priv, cfo->crystal_cap - 1);
+		else if (cfo->crystal_cap < priv->default_crystal_cap)
+			priv->fops->set_crystal_cap(priv, cfo->crystal_cap + 1);
+
+		rtl8xxxu_set_atc_status(priv, true);
+
+		return;
+	}
+
+	if (cfo->packet_count == cfo->packet_count_pre)
+		/* No new information. */
+		return;
+
+	cfo->packet_count_pre = cfo->packet_count;
+
+	/* CFO_tail[1:0] is S(8,7), (num_subcarrier>>7) x 312.5K = CFO value(K Hz) */
+	cfo_khz_a = (int)((cfo->cfo_tail[0] * 3125) / 10) >> 7;
+	cfo_khz_b = (int)((cfo->cfo_tail[1] * 3125) / 10) >> 7;
+
+	if (priv->tx_paths == 1)
+		cfo_average = cfo_khz_a;
+	else
+		cfo_average = (cfo_khz_a + cfo_khz_b) / 2;
+
+	dev_dbg(&priv->udev->dev, "cfo_average: %d\n", cfo_average);
+
+	if (cfo->adjust) {
+		if (abs(cfo_average) < CFO_TH_XTAL_LOW)
+			cfo->adjust = false;
+	} else {
+		if (abs(cfo_average) > CFO_TH_XTAL_HIGH)
+			cfo->adjust = true;
+	}
+
+	/*
+	 * TODO: We should return here only if bluetooth is enabled.
+	 * See the vendor drivers for how to determine that.
+	 */
+	if (priv->has_bluetooth)
+		return;
+
+	if (!cfo->adjust)
+		return;
+
+	crystal_cap = cfo->crystal_cap;
+
+	if (cfo_average > CFO_TH_XTAL_LOW)
+		crystal_cap++;
+	else if (cfo_average < -CFO_TH_XTAL_LOW)
+		crystal_cap--;
+
+	crystal_cap = clamp(crystal_cap, 0, 0x3f);
+
+	priv->fops->set_crystal_cap(priv, crystal_cap);
+
+	rtl8xxxu_set_atc_status(priv, abs(cfo_average) >= CFO_TH_ATC);
+}
+
+static void rtl8xxxu_watchdog_callback(struct work_struct *work)
+{
+	struct ieee80211_vif *vif;
+	struct rtl8xxxu_priv *priv;
+
+	priv = container_of(work, struct rtl8xxxu_priv, ra_watchdog.work);
+	vif = priv->vif;
+
+	if (vif && vif->type == NL80211_IFTYPE_STATION) {
+		int signal;
+		struct ieee80211_sta *sta;
+
+		rcu_read_lock();
+		sta = ieee80211_find_sta(vif, vif->bss_conf.bssid);
+		if (!sta) {
+			struct device *dev = &priv->udev->dev;
+
+			dev_dbg(dev, "%s: no sta found\n", __func__);
+			rcu_read_unlock();
+			goto out;
+		}
+		rcu_read_unlock();
+
+		signal = ieee80211_ave_rssi(vif);
+
+		priv->fops->report_rssi(priv, 0,
+					rtl8xxxu_signal_to_snr(signal));
+
+		if (priv->fops->set_crystal_cap)
+			rtl8xxxu_track_cfo(priv);
+
+		rtl8xxxu_refresh_rate_mask(priv, signal, sta, false);
+	}
+
+out:
+	schedule_delayed_work(&priv->ra_watchdog, 2 * HZ);
+}
+
+static int rtl8xxxu_start(struct ieee80211_hw *hw)
+{
+	struct rtl8xxxu_priv *priv = hw->priv;
+	struct rtl8xxxu_rx_urb *rx_urb;
+	struct rtl8xxxu_tx_urb *tx_urb;
+	struct sk_buff *skb;
+	unsigned long flags;
+	int ret, i;
+
+	ret = 0;
+
+	init_usb_anchor(&priv->rx_anchor);
+	init_usb_anchor(&priv->tx_anchor);
+	init_usb_anchor(&priv->int_anchor);
+
+	priv->fops->enable_rf(priv);
+	if (priv->usb_interrupts) {
+		ret = rtl8xxxu_submit_int_urb(hw);
+		if (ret)
+			goto exit;
+	}
+
+	for (i = 0; i < RTL8XXXU_TX_URBS; i++) {
+		tx_urb = kmalloc(sizeof(struct rtl8xxxu_tx_urb), GFP_KERNEL);
+		if (!tx_urb) {
+			if (!i)
+				ret = -ENOMEM;
+
+			goto error_out;
+		}
+		usb_init_urb(&tx_urb->urb);
+		INIT_LIST_HEAD(&tx_urb->list);
+		tx_urb->hw = hw;
+		list_add(&tx_urb->list, &priv->tx_urb_free_list);
+		priv->tx_urb_free_count++;
+	}
+
+	priv->tx_stopped = false;
+
+	spin_lock_irqsave(&priv->rx_urb_lock, flags);
+	priv->shutdown = false;
+	spin_unlock_irqrestore(&priv->rx_urb_lock, flags);
+
+	for (i = 0; i < RTL8XXXU_RX_URBS; i++) {
+		rx_urb = kmalloc(sizeof(struct rtl8xxxu_rx_urb), GFP_KERNEL);
+		if (!rx_urb) {
+			if (!i)
+				ret = -ENOMEM;
+
+			goto error_out;
+		}
+		usb_init_urb(&rx_urb->urb);
+		INIT_LIST_HEAD(&rx_urb->list);
+		rx_urb->hw = hw;
+
+		ret = rtl8xxxu_submit_rx_urb(priv, rx_urb);
+		if (ret) {
+			if (ret != -ENOMEM) {
+				skb = (struct sk_buff *)rx_urb->urb.context;
+				dev_kfree_skb(skb);
+			}
+			rtl8xxxu_queue_rx_urb(priv, rx_urb);
+		}
+	}
+
+	schedule_delayed_work(&priv->ra_watchdog, 2 * HZ);
+exit:
+	/*
+	 * Accept all data and mgmt frames
+	 */
+	rtl8xxxu_write16(priv, REG_RXFLTMAP2, 0xffff);
+	rtl8xxxu_write16(priv, REG_RXFLTMAP0, 0xffff);
+
+	rtl8xxxu_write32_mask(priv, REG_OFDM0_XA_AGC_CORE1,
+			      OFDM0_X_AGC_CORE1_IGI_MASK, 0x1e);
+
+	return ret;
+
+error_out:
+	rtl8xxxu_free_tx_resources(priv);
+	/*
+	 * Disable all data and mgmt frames
+	 */
+	rtl8xxxu_write16(priv, REG_RXFLTMAP2, 0x0000);
+	rtl8xxxu_write16(priv, REG_RXFLTMAP0, 0x0000);
+
+	return ret;
+}
+
+static void rtl8xxxu_stop(struct ieee80211_hw *hw)
+{
+	struct rtl8xxxu_priv *priv = hw->priv;
+	unsigned long flags;
+
+	rtl8xxxu_write8(priv, REG_TXPAUSE, 0xff);
+
+	rtl8xxxu_write16(priv, REG_RXFLTMAP0, 0x0000);
+	rtl8xxxu_write16(priv, REG_RXFLTMAP2, 0x0000);
+
+	spin_lock_irqsave(&priv->rx_urb_lock, flags);
+	priv->shutdown = true;
+	spin_unlock_irqrestore(&priv->rx_urb_lock, flags);
+
+	usb_kill_anchored_urbs(&priv->rx_anchor);
+	usb_kill_anchored_urbs(&priv->tx_anchor);
+	if (priv->usb_interrupts)
+		usb_kill_anchored_urbs(&priv->int_anchor);
+
+	rtl8xxxu_write8(priv, REG_TXPAUSE, 0xff);
+
+	priv->fops->disable_rf(priv);
+
+	/*
+	 * Disable interrupts
+	 */
+	if (priv->usb_interrupts)
+		rtl8xxxu_write32(priv, REG_USB_HIMR, 0);
+
+	cancel_delayed_work_sync(&priv->ra_watchdog);
+
+	rtl8xxxu_free_rx_resources(priv);
+	rtl8xxxu_free_tx_resources(priv);
+}
+
+static int rtl8xxxu_sta_add(struct ieee80211_hw *hw,
+			    struct ieee80211_vif *vif,
+			    struct ieee80211_sta *sta)
+{
+	struct rtl8xxxu_sta_info *sta_info = (struct rtl8xxxu_sta_info *)sta->drv_priv;
+	struct rtl8xxxu_priv *priv = hw->priv;
+
+	if (vif->type == NL80211_IFTYPE_AP) {
+		sta_info->macid = rtl8xxxu_acquire_macid(priv);
+		if (sta_info->macid >= RTL8XXXU_MAX_MAC_ID_NUM)
+			return -ENOSPC;
+
+		rtl8xxxu_refresh_rate_mask(priv, 0, sta, true);
+		priv->fops->report_connect(priv, sta_info->macid, H2C_MACID_ROLE_STA, true);
+	}
+
+	return 0;
+}
+
+static int rtl8xxxu_sta_remove(struct ieee80211_hw *hw,
+			       struct ieee80211_vif *vif,
+			       struct ieee80211_sta *sta)
+{
+	struct rtl8xxxu_sta_info *sta_info = (struct rtl8xxxu_sta_info *)sta->drv_priv;
+	struct rtl8xxxu_priv *priv = hw->priv;
+
+	if (vif->type == NL80211_IFTYPE_AP)
+		rtl8xxxu_release_macid(priv, sta_info->macid);
+
+	return 0;
+}
+
+static const struct ieee80211_ops rtl8xxxu_ops = {
+	.tx = rtl8xxxu_tx,
+	.wake_tx_queue = ieee80211_handle_wake_tx_queue,
+	.add_interface = rtl8xxxu_add_interface,
+	.remove_interface = rtl8xxxu_remove_interface,
+	.config = rtl8xxxu_config,
+	.conf_tx = rtl8xxxu_conf_tx,
+	.bss_info_changed = rtl8xxxu_bss_info_changed,
+	.start_ap = rtl8xxxu_start_ap,
+	.configure_filter = rtl8xxxu_configure_filter,
+	.set_rts_threshold = rtl8xxxu_set_rts_threshold,
+	.start = rtl8xxxu_start,
+	.stop = rtl8xxxu_stop,
+	.sw_scan_start = rtl8xxxu_sw_scan_start,
+	.sw_scan_complete = rtl8xxxu_sw_scan_complete,
+	.set_key = rtl8xxxu_set_key,
+	.ampdu_action = rtl8xxxu_ampdu_action,
+	.sta_statistics = rtl8xxxu_sta_statistics,
+	.get_antenna = rtl8xxxu_get_antenna,
+	.set_tim = rtl8xxxu_set_tim,
+	.sta_add = rtl8xxxu_sta_add,
+	.sta_remove = rtl8xxxu_sta_remove,
+};
+
+static int rtl8xxxu_parse_usb(struct rtl8xxxu_priv *priv,
+			      struct usb_interface *interface)
+{
+	struct usb_interface_descriptor *interface_desc;
+	struct usb_host_interface *host_interface;
+	struct usb_endpoint_descriptor *endpoint;
+	struct device *dev = &priv->udev->dev;
+	int i, j = 0, endpoints;
+	u8 dir, xtype, num;
+	int ret = 0;
+
+	host_interface = interface->cur_altsetting;
+	interface_desc = &host_interface->desc;
+	endpoints = interface_desc->bNumEndpoints;
+
+	for (i = 0; i < endpoints; i++) {
+		endpoint = &host_interface->endpoint[i].desc;
+
+		dir = endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK;
+		num = usb_endpoint_num(endpoint);
+		xtype = usb_endpoint_type(endpoint);
+		if (rtl8xxxu_debug & RTL8XXXU_DEBUG_USB)
+			dev_dbg(dev,
+				"%s: endpoint: dir %02x, # %02x, type %02x\n",
+				__func__, dir, num, xtype);
+		if (usb_endpoint_dir_in(endpoint) &&
+		    usb_endpoint_xfer_bulk(endpoint)) {
+			if (rtl8xxxu_debug & RTL8XXXU_DEBUG_USB)
+				dev_dbg(dev, "%s: in endpoint num %i\n",
+					__func__, num);
+
+			if (priv->pipe_in) {
+				dev_warn(dev,
+					 "%s: Too many IN pipes\n", __func__);
+				ret = -EINVAL;
+				goto exit;
+			}
+
+			priv->pipe_in =	usb_rcvbulkpipe(priv->udev, num);
+		}
+
+		if (usb_endpoint_dir_in(endpoint) &&
+		    usb_endpoint_xfer_int(endpoint)) {
+			if (rtl8xxxu_debug & RTL8XXXU_DEBUG_USB)
+				dev_dbg(dev, "%s: interrupt endpoint num %i\n",
+					__func__, num);
+
+			if (priv->pipe_interrupt) {
+				dev_warn(dev, "%s: Too many INTERRUPT pipes\n",
+					 __func__);
+				ret = -EINVAL;
+				goto exit;
+			}
+
+			priv->pipe_interrupt = usb_rcvintpipe(priv->udev, num);
+		}
+
+		if (usb_endpoint_dir_out(endpoint) &&
+		    usb_endpoint_xfer_bulk(endpoint)) {
+			if (rtl8xxxu_debug & RTL8XXXU_DEBUG_USB)
+				dev_dbg(dev, "%s: out endpoint num %i\n",
+					__func__, num);
+			if (j >= RTL8XXXU_OUT_ENDPOINTS) {
+				dev_warn(dev,
+					 "%s: Too many OUT pipes\n", __func__);
+				ret = -EINVAL;
+				goto exit;
+			}
+			priv->out_ep[j++] = num;
+		}
+	}
+exit:
+	priv->nr_out_eps = j;
+	return ret;
+}
+
+static void rtl8xxxu_init_led(struct rtl8xxxu_priv *priv)
+{
+	struct led_classdev *led = &priv->led_cdev;
+
+	if (!priv->fops->led_classdev_brightness_set)
+		return;
+
+	led->brightness_set_blocking = priv->fops->led_classdev_brightness_set;
+
+	snprintf(priv->led_name, sizeof(priv->led_name),
+		 "rtl8xxxu-usb%s", dev_name(&priv->udev->dev));
+	led->name = priv->led_name;
+	led->max_brightness = RTL8XXXU_HW_LED_CONTROL;
+
+	if (led_classdev_register(&priv->udev->dev, led))
+		return;
+
+	priv->led_registered = true;
+
+	led->brightness = led->max_brightness;
+	priv->fops->led_classdev_brightness_set(led, led->brightness);
+}
+
+static void rtl8xxxu_deinit_led(struct rtl8xxxu_priv *priv)
+{
+	struct led_classdev *led = &priv->led_cdev;
+
+	if (!priv->led_registered)
+		return;
+
+	priv->fops->led_classdev_brightness_set(led, LED_OFF);
+	led_classdev_unregister(led);
+}
+
+static int rtl8xxxu_probe(struct usb_interface *interface,
+			  const struct usb_device_id *id)
+{
+	struct rtl8xxxu_priv *priv;
+	struct ieee80211_hw *hw;
+	struct usb_device *udev;
+	struct ieee80211_supported_band *sband;
+	int ret;
+	int untested = 1;
+
+	udev = usb_get_dev(interface_to_usbdev(interface));
+
+	switch (id->idVendor) {
+	case USB_VENDOR_ID_REALTEK:
+		switch(id->idProduct) {
+		case 0x1724:
+		case 0x8176:
+		case 0x8178:
+		case 0x817f:
+		case 0x818b:
+		case 0xf179:
+		case 0x8179:
+		case 0xb711:
+		case 0xf192:
+			untested = 0;
+			break;
+		}
+		break;
+	case 0x7392:
+		if (id->idProduct == 0x7811 || id->idProduct == 0xa611 || id->idProduct == 0xb811)
+			untested = 0;
+		break;
+	case 0x050d:
+		if (id->idProduct == 0x1004)
+			untested = 0;
+		break;
+	case 0x20f4:
+		if (id->idProduct == 0x648b)
+			untested = 0;
+		break;
+	case 0x2001:
+		if (id->idProduct == 0x3308)
+			untested = 0;
+		break;
+	case 0x2357:
+		if (id->idProduct == 0x0109)
+			untested = 0;
+		break;
+	case 0x0b05:
+		if (id->idProduct == 0x18f1)
+			untested = 0;
+		break;
+	default:
+		break;
+	}
+
+	if (untested) {
+		rtl8xxxu_debug |= RTL8XXXU_DEBUG_EFUSE;
+		dev_info(&udev->dev,
+			 "This Realtek USB WiFi dongle (0x%04x:0x%04x) is untested!\n",
+			 id->idVendor, id->idProduct);
+		dev_info(&udev->dev,
+			 "Please report results to Jes.Sorensen@gmail.com\n");
+	}
+
+	hw = ieee80211_alloc_hw(sizeof(struct rtl8xxxu_priv), &rtl8xxxu_ops);
+	if (!hw) {
+		ret = -ENOMEM;
+		goto err_put_dev;
+	}
+
+	priv = hw->priv;
+	priv->hw = hw;
+	priv->udev = udev;
+	priv->fops = (struct rtl8xxxu_fileops *)id->driver_info;
+	mutex_init(&priv->usb_buf_mutex);
+	mutex_init(&priv->syson_indirect_access_mutex);
+	mutex_init(&priv->h2c_mutex);
+	INIT_LIST_HEAD(&priv->tx_urb_free_list);
+	spin_lock_init(&priv->tx_urb_lock);
+	INIT_LIST_HEAD(&priv->rx_urb_pending_list);
+	spin_lock_init(&priv->rx_urb_lock);
+	INIT_WORK(&priv->rx_urb_wq, rtl8xxxu_rx_urb_work);
+	INIT_DELAYED_WORK(&priv->ra_watchdog, rtl8xxxu_watchdog_callback);
+	INIT_WORK(&priv->update_beacon_work, rtl8xxxu_update_beacon_work_callback);
+	skb_queue_head_init(&priv->c2hcmd_queue);
+
+	usb_set_intfdata(interface, hw);
+
+	ret = rtl8xxxu_parse_usb(priv, interface);
+	if (ret)
+		goto err_set_intfdata;
+
+	ret = priv->fops->identify_chip(priv);
+	if (ret) {
+		dev_err(&udev->dev, "Fatal - failed to identify chip\n");
+		goto err_set_intfdata;
+	}
+
+	hw->wiphy->available_antennas_tx = BIT(priv->tx_paths) - 1;
+	hw->wiphy->available_antennas_rx = BIT(priv->rx_paths) - 1;
+
+	if (priv->rtl_chip == RTL8188E)
+		INIT_WORK(&priv->c2hcmd_work, rtl8188e_c2hcmd_callback);
+	else
+		INIT_WORK(&priv->c2hcmd_work, rtl8xxxu_c2hcmd_callback);
+
+	ret = priv->fops->read_efuse(priv);
+	if (ret) {
+		dev_err(&udev->dev, "Fatal - failed to read EFuse\n");
+		goto err_set_intfdata;
+	}
+
+	ret = priv->fops->parse_efuse(priv);
+	if (ret) {
+		dev_err(&udev->dev, "Fatal - failed to parse EFuse\n");
+		goto err_set_intfdata;
+	}
+
+	if (rtl8xxxu_debug & RTL8XXXU_DEBUG_EFUSE)
+		rtl8xxxu_dump_efuse(priv);
+
+	rtl8xxxu_print_chipinfo(priv);
+
+	ret = priv->fops->load_firmware(priv);
+	if (ret) {
+		dev_err(&udev->dev, "Fatal - failed to load firmware\n");
+		goto err_set_intfdata;
+	}
+
+	ret = rtl8xxxu_init_device(hw);
+	if (ret)
+		goto err_set_intfdata;
+
+	hw->wiphy->max_scan_ssids = 1;
+	hw->wiphy->max_scan_ie_len = IEEE80211_MAX_DATA_LEN;
+	if (priv->fops->max_macid_num)
+		hw->wiphy->max_ap_assoc_sta = priv->fops->max_macid_num - 1;
+	hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
+	if (priv->fops->supports_ap)
+		hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_AP);
+	hw->queues = 4;
+
+	sband = &rtl8xxxu_supported_band;
+	sband->ht_cap.ht_supported = true;
+	sband->ht_cap.ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K;
+	sband->ht_cap.ampdu_density = IEEE80211_HT_MPDU_DENSITY_16;
+	sband->ht_cap.cap = IEEE80211_HT_CAP_SGI_20 | IEEE80211_HT_CAP_SGI_40;
+	memset(&sband->ht_cap.mcs, 0, sizeof(sband->ht_cap.mcs));
+	sband->ht_cap.mcs.rx_mask[0] = 0xff;
+	sband->ht_cap.mcs.rx_mask[4] = 0x01;
+	if (priv->rf_paths > 1) {
+		sband->ht_cap.mcs.rx_mask[1] = 0xff;
+		sband->ht_cap.cap |= IEEE80211_HT_CAP_SGI_40;
+	}
+	sband->ht_cap.mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED;
+	/*
+	 * Some APs will negotiate HT20_40 in a noisy environment leading
+	 * to miserable performance. Rather than defaulting to this, only
+	 * enable it if explicitly requested at module load time.
+	 */
+	if (rtl8xxxu_ht40_2g) {
+		dev_info(&udev->dev, "Enabling HT_20_40 on the 2.4GHz band\n");
+		sband->ht_cap.cap |= IEEE80211_HT_CAP_SUP_WIDTH_20_40;
+	}
+	hw->wiphy->bands[NL80211_BAND_2GHZ] = sband;
+
+	hw->wiphy->rts_threshold = 2347;
+
+	SET_IEEE80211_DEV(priv->hw, &interface->dev);
+	SET_IEEE80211_PERM_ADDR(hw, priv->mac_addr);
+
+	hw->extra_tx_headroom = priv->fops->tx_desc_size;
+	ieee80211_hw_set(hw, SIGNAL_DBM);
+
+	/*
+	 * The firmware handles rate control, except for RTL8188EU,
+	 * where we handle the rate control in the driver.
+	 */
+	ieee80211_hw_set(hw, HAS_RATE_CONTROL);
+	ieee80211_hw_set(hw, SUPPORT_FAST_XMIT);
+	ieee80211_hw_set(hw, AMPDU_AGGREGATION);
+
+	wiphy_ext_feature_set(hw->wiphy, NL80211_EXT_FEATURE_CQM_RSSI_LIST);
+
+	ret = ieee80211_register_hw(priv->hw);
+	if (ret) {
+		dev_err(&udev->dev, "%s: Failed to register: %i\n",
+			__func__, ret);
+		goto err_set_intfdata;
+	}
+
+	rtl8xxxu_init_led(priv);
+
+	return 0;
+
+err_set_intfdata:
+	usb_set_intfdata(interface, NULL);
+
+	kfree(priv->fw_data);
+	mutex_destroy(&priv->usb_buf_mutex);
+	mutex_destroy(&priv->syson_indirect_access_mutex);
+	mutex_destroy(&priv->h2c_mutex);
+
+	ieee80211_free_hw(hw);
+err_put_dev:
+	usb_put_dev(udev);
+
+	return ret;
+}
+
+static void rtl8xxxu_disconnect(struct usb_interface *interface)
+{
+	struct rtl8xxxu_priv *priv;
+	struct ieee80211_hw *hw;
+
+	hw = usb_get_intfdata(interface);
+	priv = hw->priv;
+
+	rtl8xxxu_deinit_led(priv);
+
+	ieee80211_unregister_hw(hw);
+
+	priv->fops->power_off(priv);
+
+	usb_set_intfdata(interface, NULL);
+
+	dev_info(&priv->udev->dev, "disconnecting\n");
+
+	kfree(priv->fw_data);
+	mutex_destroy(&priv->usb_buf_mutex);
+	mutex_destroy(&priv->syson_indirect_access_mutex);
+	mutex_destroy(&priv->h2c_mutex);
+
+	if (priv->udev->state != USB_STATE_NOTATTACHED) {
+		dev_info(&priv->udev->dev,
+			 "Device still attached, trying to reset\n");
+		usb_reset_device(priv->udev);
+	}
+	usb_put_dev(priv->udev);
+	ieee80211_free_hw(hw);
+}
+
+static const struct usb_device_id dev_table[] = {
+{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x8724, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8723au_fops},
+{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x1724, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8723au_fops},
+{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x0724, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8723au_fops},
+{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x818b, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192eu_fops},
+/* TP-Link TL-WN822N v4 */
+{USB_DEVICE_AND_INTERFACE_INFO(0x2357, 0x0108, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192eu_fops},
+/* D-Link DWA-131 rev E1, tested by David Patiño */
+{USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x3319, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192eu_fops},
+/* Tested by Myckel Habets */
+{USB_DEVICE_AND_INTERFACE_INFO(0x2357, 0x0109, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192eu_fops},
+{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0xb720, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8723bu_fops},
+{USB_DEVICE_AND_INTERFACE_INFO(0x7392, 0xa611, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8723bu_fops},
+/* RTL8188FU */
+{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0xf179, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8188fu_fops},
+{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x8179, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8188eu_fops},
+/* Tested by Hans de Goede - rtl8188etv */
+{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x0179, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8188eu_fops},
+/* Sitecom rtl8188eus */
+{USB_DEVICE_AND_INTERFACE_INFO(0x0df6, 0x0076, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8188eu_fops},
+/* D-Link USB-GO-N150 */
+{USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x3311, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8188eu_fops},
+/* D-Link DWA-125 REV D1 */
+{USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x330f, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8188eu_fops},
+/* D-Link DWA-123 REV D1 */
+{USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x3310, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8188eu_fops},
+/* D-Link DWA-121 rev B1 */
+{USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x331b, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8188eu_fops},
+/* Abocom - Abocom */
+{USB_DEVICE_AND_INTERFACE_INFO(0x07b8, 0x8179, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8188eu_fops},
+/* Elecom WDC-150SU2M */
+{USB_DEVICE_AND_INTERFACE_INFO(0x056e, 0x4008, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8188eu_fops},
+/* TP-Link TL-WN722N v2 */
+{USB_DEVICE_AND_INTERFACE_INFO(0x2357, 0x010c, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8188eu_fops},
+/* TP-Link TL-WN727N v5.21 */
+{USB_DEVICE_AND_INTERFACE_INFO(0x2357, 0x0111, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8188eu_fops},
+/* MERCUSYS MW150US v2 */
+{USB_DEVICE_AND_INTERFACE_INFO(0x2c4e, 0x0102, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8188eu_fops},
+/* ASUS USB-N10 Nano B1 */
+{USB_DEVICE_AND_INTERFACE_INFO(0x0b05, 0x18f0, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8188eu_fops},
+ /* Edimax EW-7811Un V2 */
+{USB_DEVICE_AND_INTERFACE_INFO(0x7392, 0xb811, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8188eu_fops},
+/* Rosewill USB-N150 Nano */
+{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0xffef, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8188eu_fops},
+/* RTL8710BU aka RTL8188GU (not to be confused with RTL8188GTVU) */
+{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0xb711, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8710bu_fops},
+/* TOTOLINK N150UA V5 / N150UA-B */
+{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x2005, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8710bu_fops},
+/* Comfast CF-826F */
+{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0xf192, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192fu_fops},
+/* Asus USB-N13 rev C1 */
+{USB_DEVICE_AND_INTERFACE_INFO(0x0b05, 0x18f1, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192fu_fops},
+{USB_DEVICE_AND_INTERFACE_INFO(0x7392, 0xb722, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192fu_fops},
+{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x318b, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192fu_fops},
+#ifdef CONFIG_RTL8XXXU_UNTESTED
+/* Still supported by rtlwifi */
+{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x8176, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192cu_fops},
+{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x8178, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192cu_fops},
+{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x817f, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192cu_fops},
+/* Tested by Larry Finger */
+{USB_DEVICE_AND_INTERFACE_INFO(0x7392, 0x7811, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192cu_fops},
+/* Tested by Andrea Merello */
+{USB_DEVICE_AND_INTERFACE_INFO(0x050d, 0x1004, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192cu_fops},
+/* Tested by Jocelyn Mayer */
+{USB_DEVICE_AND_INTERFACE_INFO(0x20f4, 0x648b, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192cu_fops},
+/* Tested by Stefano Bravi */
+{USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x3308, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192cu_fops},
+/* Currently untested 8188 series devices */
+{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x018a, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192cu_fops},
+{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x8191, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192cu_fops},
+{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x8170, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192cu_fops},
+{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x8177, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192cu_fops},
+{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x817a, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192cu_fops},
+{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x817b, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192cu_fops},
+{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x817d, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192cu_fops},
+{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x817e, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192cu_fops},
+{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x818a, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192cu_fops},
+{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x317f, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192cu_fops},
+{USB_DEVICE_AND_INTERFACE_INFO(0x1058, 0x0631, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192cu_fops},
+{USB_DEVICE_AND_INTERFACE_INFO(0x04bb, 0x094c, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192cu_fops},
+{USB_DEVICE_AND_INTERFACE_INFO(0x050d, 0x1102, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192cu_fops},
+{USB_DEVICE_AND_INTERFACE_INFO(0x06f8, 0xe033, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192cu_fops},
+{USB_DEVICE_AND_INTERFACE_INFO(0x07b8, 0x8189, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192cu_fops},
+{USB_DEVICE_AND_INTERFACE_INFO(0x0846, 0x9041, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192cu_fops},
+{USB_DEVICE_AND_INTERFACE_INFO(0x0b05, 0x17ba, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192cu_fops},
+{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x1e1e, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192cu_fops},
+{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x5088, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192cu_fops},
+{USB_DEVICE_AND_INTERFACE_INFO(0x0df6, 0x0052, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192cu_fops},
+{USB_DEVICE_AND_INTERFACE_INFO(0x0df6, 0x005c, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192cu_fops},
+{USB_DEVICE_AND_INTERFACE_INFO(0x0eb0, 0x9071, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192cu_fops},
+{USB_DEVICE_AND_INTERFACE_INFO(0x103c, 0x1629, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192cu_fops},
+{USB_DEVICE_AND_INTERFACE_INFO(0x13d3, 0x3357, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192cu_fops},
+{USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x330b, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192cu_fops},
+{USB_DEVICE_AND_INTERFACE_INFO(0x2019, 0x4902, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192cu_fops},
+{USB_DEVICE_AND_INTERFACE_INFO(0x2019, 0xab2a, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192cu_fops},
+{USB_DEVICE_AND_INTERFACE_INFO(0x2019, 0xab2e, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192cu_fops},
+{USB_DEVICE_AND_INTERFACE_INFO(0x2019, 0xed17, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192cu_fops},
+{USB_DEVICE_AND_INTERFACE_INFO(0x4855, 0x0090, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192cu_fops},
+{USB_DEVICE_AND_INTERFACE_INFO(0x4856, 0x0091, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192cu_fops},
+{USB_DEVICE_AND_INTERFACE_INFO(0xcdab, 0x8010, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192cu_fops},
+{USB_DEVICE_AND_INTERFACE_INFO(0x04f2, 0xaff7, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192cu_fops},
+{USB_DEVICE_AND_INTERFACE_INFO(0x04f2, 0xaff9, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192cu_fops},
+{USB_DEVICE_AND_INTERFACE_INFO(0x04f2, 0xaffa, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192cu_fops},
+{USB_DEVICE_AND_INTERFACE_INFO(0x04f2, 0xaff8, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192cu_fops},
+{USB_DEVICE_AND_INTERFACE_INFO(0x04f2, 0xaffb, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192cu_fops},
+{USB_DEVICE_AND_INTERFACE_INFO(0x04f2, 0xaffc, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192cu_fops},
+{USB_DEVICE_AND_INTERFACE_INFO(0x2019, 0x1201, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192cu_fops},
+/* Currently untested 8192 series devices */
+{USB_DEVICE_AND_INTERFACE_INFO(0x04bb, 0x0950, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192cu_fops},
+{USB_DEVICE_AND_INTERFACE_INFO(0x050d, 0x2102, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192cu_fops},
+{USB_DEVICE_AND_INTERFACE_INFO(0x050d, 0x2103, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192cu_fops},
+{USB_DEVICE_AND_INTERFACE_INFO(0x0586, 0x341f, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192cu_fops},
+{USB_DEVICE_AND_INTERFACE_INFO(0x06f8, 0xe035, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192cu_fops},
+{USB_DEVICE_AND_INTERFACE_INFO(0x0b05, 0x17ab, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192cu_fops},
+{USB_DEVICE_AND_INTERFACE_INFO(0x0df6, 0x0061, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192cu_fops},
+{USB_DEVICE_AND_INTERFACE_INFO(0x0df6, 0x0070, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192cu_fops},
+{USB_DEVICE_AND_INTERFACE_INFO(0x0789, 0x016d, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192cu_fops},
+{USB_DEVICE_AND_INTERFACE_INFO(0x07aa, 0x0056, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192cu_fops},
+{USB_DEVICE_AND_INTERFACE_INFO(0x07b8, 0x8178, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192cu_fops},
+{USB_DEVICE_AND_INTERFACE_INFO(0x0846, 0x9021, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192cu_fops},
+{USB_DEVICE_AND_INTERFACE_INFO(0x0846, 0xf001, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192cu_fops},
+{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x2e2e, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192cu_fops},
+{USB_DEVICE_AND_INTERFACE_INFO(0x0e66, 0x0019, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192cu_fops},
+{USB_DEVICE_AND_INTERFACE_INFO(0x0e66, 0x0020, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192cu_fops},
+{USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x3307, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192cu_fops},
+{USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x3309, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192cu_fops},
+{USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x330a, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192cu_fops},
+{USB_DEVICE_AND_INTERFACE_INFO(0x2019, 0xab2b, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192cu_fops},
+{USB_DEVICE_AND_INTERFACE_INFO(0x20f4, 0x624d, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192cu_fops},
+{USB_DEVICE_AND_INTERFACE_INFO(0x2357, 0x0100, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192cu_fops},
+{USB_DEVICE_AND_INTERFACE_INFO(0x4855, 0x0091, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192cu_fops},
+{USB_DEVICE_AND_INTERFACE_INFO(0x7392, 0x7822, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192cu_fops},
+/* found in rtl8192eu vendor driver */
+{USB_DEVICE_AND_INTERFACE_INFO(0x2357, 0x0107, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192eu_fops},
+{USB_DEVICE_AND_INTERFACE_INFO(0x2019, 0xab33, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192eu_fops},
+{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x818c, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192eu_fops},
+#endif
+{ }
+};
+
+static struct usb_driver rtl8xxxu_driver = {
+	.name = DRIVER_NAME,
+	.probe = rtl8xxxu_probe,
+	.disconnect = rtl8xxxu_disconnect,
+	.id_table = dev_table,
+	.no_dynamic_id = 1,
+	.disable_hub_initiated_lpm = 1,
+};
+
+MODULE_DEVICE_TABLE(usb, dev_table);
+
+module_usb_driver(rtl8xxxu_driver);
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h
new file mode 100644
index 0000000000..920ee50e21
--- /dev/null
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h
@@ -0,0 +1,1366 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2014 - 2017 Jes Sorensen <Jes.Sorensen@gmail.com>
+ *
+ * Register definitions taken from original Realtek rtl8723au driver
+ */
+
+/* 0x0000 ~ 0x00FF	System Configuration */
+#define REG_SYS_ISO_CTRL		0x0000
+#define  SYS_ISO_MD2PP			BIT(0)
+#define  SYS_ISO_ANALOG_IPS		BIT(5)
+#define  SYS_ISO_DIOR			BIT(9)
+#define  SYS_ISO_PWC_EV25V		BIT(14)
+#define  SYS_ISO_PWC_EV12V		BIT(15)
+
+#define REG_SYS_FUNC			0x0002
+#define  SYS_FUNC_BBRSTB		BIT(0)
+#define  SYS_FUNC_BB_GLB_RSTN		BIT(1)
+#define  SYS_FUNC_USBA			BIT(2)
+#define  SYS_FUNC_UPLL			BIT(3)
+#define  SYS_FUNC_USBD			BIT(4)
+#define  SYS_FUNC_DIO_PCIE		BIT(5)
+#define  SYS_FUNC_PCIEA			BIT(6)
+#define  SYS_FUNC_PPLL			BIT(7)
+#define  SYS_FUNC_PCIED			BIT(8)
+#define  SYS_FUNC_DIOE			BIT(9)
+#define  SYS_FUNC_CPU_ENABLE		BIT(10)
+#define  SYS_FUNC_DCORE			BIT(11)
+#define  SYS_FUNC_ELDR			BIT(12)
+#define  SYS_FUNC_DIO_RF		BIT(13)
+#define  SYS_FUNC_HWPDN			BIT(14)
+#define  SYS_FUNC_MREGEN		BIT(15)
+
+#define REG_APS_FSMCO			0x0004
+#define  APS_FSMCO_PFM_ALDN		BIT(1)
+#define  APS_FSMCO_PFM_WOWL		BIT(3)
+#define  APS_FSMCO_ENABLE_POWERDOWN	BIT(4)
+#define  APS_FSMCO_MAC_ENABLE		BIT(8)
+#define  APS_FSMCO_MAC_OFF		BIT(9)
+#define  APS_FSMCO_SW_LPS		BIT(10)
+#define  APS_FSMCO_HW_SUSPEND		BIT(11)
+#define  APS_FSMCO_PCIE			BIT(12)
+#define  APS_FSMCO_HW_POWERDOWN		BIT(15)
+#define  APS_FSMCO_WLON_RESET		BIT(16)
+
+#define REG_SYS_CLKR			0x0008
+#define  SYS_CLK_ANAD16V_ENABLE		BIT(0)
+#define  SYS_CLK_ANA8M			BIT(1)
+#define  SYS_CLK_MACSLP			BIT(4)
+#define  SYS_CLK_LOADER_ENABLE		BIT(5)
+#define  SYS_CLK_80M_SSC_DISABLE	BIT(7)
+#define  SYS_CLK_80M_SSC_ENABLE_HO	BIT(8)
+#define  SYS_CLK_PHY_SSC_RSTB		BIT(9)
+#define  SYS_CLK_SEC_CLK_ENABLE		BIT(10)
+#define  SYS_CLK_MAC_CLK_ENABLE		BIT(11)
+#define  SYS_CLK_ENABLE			BIT(12)
+#define  SYS_CLK_RING_CLK_ENABLE	BIT(13)
+
+#define REG_9346CR			0x000a
+#define  EEPROM_BOOT			BIT(4)
+#define  EEPROM_ENABLE			BIT(5)
+
+#define REG_EE_VPD			0x000c
+#define REG_AFE_MISC			0x0010
+#define  AFE_MISC_WL_XTAL_CTRL		BIT(6)
+
+#define REG_SPS0_CTRL			0x0011
+#define REG_SPS_OCP_CFG			0x0018
+#define REG_8192E_LDOV12_CTRL		0x0014
+#define REG_SYS_SWR_CTRL2		0x0014
+#define REG_RSV_CTRL			0x001c
+#define  RSV_CTRL_WLOCK_1C		BIT(5)
+#define  RSV_CTRL_DIS_PRST		BIT(6)
+
+#define REG_RF_CTRL			0x001f
+#define  RF_ENABLE			BIT(0)
+#define  RF_RSTB			BIT(1)
+#define  RF_SDMRSTB			BIT(2)
+
+#define REG_LDOA15_CTRL			0x0020
+#define  LDOA15_ENABLE			BIT(0)
+#define  LDOA15_STANDBY			BIT(1)
+#define  LDOA15_OBUF			BIT(2)
+#define  LDOA15_REG_VOS			BIT(3)
+#define  LDOA15_VOADJ_SHIFT		4
+
+#define REG_LDOV12D_CTRL		0x0021
+#define  LDOV12D_ENABLE			BIT(0)
+#define  LDOV12D_STANDBY		BIT(1)
+#define  LDOV12D_VADJ_SHIFT		4
+
+#define REG_LDOHCI12_CTRL		0x0022
+
+#define REG_LPLDO_CTRL			0x0023
+#define  LPLDO_HSM			BIT(2)
+#define  LPLDO_LSM_DIS			BIT(3)
+
+#define REG_AFE_XTAL_CTRL		0x0024
+#define  AFE_XTAL_ENABLE		BIT(0)
+#define  AFE_XTAL_B_SELECT		BIT(1)
+#define  AFE_XTAL_GATE_USB		BIT(8)
+#define  AFE_XTAL_GATE_AFE		BIT(11)
+#define  AFE_XTAL_RF_GATE		BIT(14)
+#define  AFE_XTAL_GATE_DIG		BIT(17)
+#define  AFE_XTAL_BT_GATE		BIT(20)
+
+/*
+ * 0x0028 is also known as REG_AFE_CTRL2 on 8723bu/8192eu
+ */
+#define REG_AFE_PLL_CTRL		0x0028
+#define  AFE_PLL_ENABLE			BIT(0)
+#define  AFE_PLL_320_ENABLE		BIT(1)
+#define  APE_PLL_FREF_SELECT		BIT(2)
+#define  AFE_PLL_EDGE_SELECT		BIT(3)
+#define  AFE_PLL_WDOGB			BIT(4)
+#define  AFE_PLL_LPF_ENABLE		BIT(5)
+
+#define REG_MAC_PHY_CTRL		0x002c
+
+#define REG_EFUSE_CTRL			0x0030
+#define REG_EFUSE_TEST			0x0034
+#define  EFUSE_TRPT			BIT(7)
+	/*  00: Wifi Efuse, 01: BT Efuse0, 10: BT Efuse1, 11: BT Efuse2 */
+#define  EFUSE_CELL_SEL			(BIT(8) | BIT(9))
+#define  EFUSE_LDOE25_ENABLE		BIT(31)
+#define  EFUSE_SELECT_MASK		0x0300
+#define  EFUSE_WIFI_SELECT		0x0000
+#define  EFUSE_BT0_SELECT		0x0100
+#define  EFUSE_BT1_SELECT		0x0200
+#define  EFUSE_BT2_SELECT		0x0300
+
+#define  EFUSE_ACCESS_ENABLE		0x69	/* RTL8723 only */
+#define  EFUSE_ACCESS_DISABLE		0x00	/* RTL8723 only */
+
+#define REG_PWR_DATA			0x0038
+#define  PWR_DATA_EEPRPAD_RFE_CTRL_EN	BIT(11)
+
+#define REG_CAL_TIMER			0x003c
+#define REG_ACLK_MON			0x003e
+#define REG_GPIO_MUXCFG			0x0040
+#define  GPIO_MUXCFG_IO_SEL_ENBT	BIT(5)
+#define REG_GPIO_IO_SEL			0x0042
+#define REG_MAC_PINMUX_CFG		0x0043
+#define REG_GPIO_PIN_CTRL		0x0044
+#define REG_GPIO_INTM			0x0048
+#define  GPIO_INTM_EDGE_TRIG_IRQ	BIT(9)
+
+#define REG_LEDCFG0			0x004c
+#define  LEDCFG0_DPDT_SELECT		BIT(23)
+#define REG_LEDCFG1			0x004d
+#define  LEDCFG1_HW_LED_CONTROL		BIT(1)
+#define  LEDCFG1_LED_DISABLE		BIT(7)
+#define REG_LEDCFG2			0x004e
+#define  LEDCFG2_HW_LED_CONTROL		BIT(1)
+#define  LEDCFG2_HW_LED_ENABLE		BIT(5)
+#define  LEDCFG2_SW_LED_DISABLE		BIT(3)
+#define  LEDCFG2_SW_LED_CONTROL   	BIT(5)
+#define  LEDCFG2_DPDT_SELECT		BIT(7)
+#define REG_LEDCFG3			0x004f
+#define REG_LEDCFG			REG_LEDCFG2
+#define REG_FSIMR			0x0050
+#define REG_FSISR			0x0054
+#define REG_HSIMR			0x0058
+#define REG_HSISR			0x005c
+/*  RTL8723 WIFI/BT/GPS Multi-Function GPIO Pin Control. */
+#define REG_GPIO_PIN_CTRL_2		0x0060
+/*  RTL8723 WIFI/BT/GPS Multi-Function GPIO Select. */
+#define REG_GPIO_IO_SEL_2		0x0062
+#define  GPIO_IO_SEL_2_GPIO09_INPUT	BIT(1)
+#define  GPIO_IO_SEL_2_GPIO09_IRQ	BIT(9)
+
+/*  RTL8723B */
+#define REG_PAD_CTRL1			0x0064
+#define  PAD_CTRL1_SW_DPDT_SEL_DATA	BIT(0)
+
+/*  RTL8723 only WIFI/BT/GPS Multi-Function control source. */
+#define REG_MULTI_FUNC_CTRL		0x0068
+
+#define  MULTI_FN_WIFI_HW_PWRDOWN_EN	BIT(0)	/* Enable GPIO[9] as WiFi HW
+						   powerdown source */
+#define  MULTI_FN_WIFI_HW_PWRDOWN_SL	BIT(1)	/* WiFi HW powerdown polarity
+						   control */
+#define  MULTI_WIFI_FUNC_EN		BIT(2)	/* WiFi function enable */
+
+#define  MULTI_WIFI_HW_ROF_EN		BIT(3)	/* Enable GPIO[9] as WiFi RF HW
+						   powerdown source */
+#define  MULTI_BT_HW_PWRDOWN_EN		BIT(16)	/* Enable GPIO[11] as BT HW
+						   powerdown source */
+#define  MULTI_BT_HW_PWRDOWN_SL		BIT(17)	/* BT HW powerdown polarity
+						   control */
+#define  MULTI_BT_FUNC_EN		BIT(18)	/* BT function enable */
+#define  MULTI_BT_HW_ROF_EN		BIT(19)	/* Enable GPIO[11] as BT/GPS
+						   RF HW powerdown source */
+#define  MULTI_GPS_HW_PWRDOWN_EN	BIT(20)	/* Enable GPIO[10] as GPS HW
+						   powerdown source */
+#define  MULTI_GPS_HW_PWRDOWN_SL	BIT(21)	/* GPS HW powerdown polarity
+						   control */
+#define  MULTI_GPS_FUNC_EN		BIT(22)	/* GPS function enable */
+
+#define REG_AFE_CTRL4			0x0078	/* 8192eu/8723bu */
+#define REG_LDO_SW_CTRL			0x007c	/* 8192eu */
+
+#define REG_MCU_FW_DL			0x0080
+#define  MCU_FW_DL_ENABLE		BIT(0)
+#define  MCU_FW_DL_READY		BIT(1)
+#define  MCU_FW_DL_CSUM_REPORT		BIT(2)
+#define  MCU_MAC_INIT_READY		BIT(3)
+#define  MCU_BB_INIT_READY		BIT(4)
+#define  MCU_RF_INIT_READY		BIT(5)
+#define  MCU_WINT_INIT_READY		BIT(6)
+#define  MCU_FW_RAM_SEL			BIT(7)	/* 1: RAM, 0:ROM */
+#define  MCU_CP_RESET			BIT(23)
+
+#define REG_HMBOX_EXT_0			0x0088
+#define REG_HMBOX_EXT_1			0x008a
+#define REG_HMBOX_EXT_2			0x008c
+#define REG_HMBOX_EXT_3			0x008e
+
+#define REG_RSVD_1			0x0097
+
+/* Interrupt registers for 8192e/8723bu/8812 */
+#define REG_HIMR0			0x00b0
+#define	 IMR0_TXCCK			BIT(30)	/* TXRPT interrupt when CCX bit
+						   of the packet is set */
+#define	 IMR0_PSTIMEOUT			BIT(29)	/* Power Save Time Out Int */
+#define	 IMR0_GTINT4			BIT(28)	/* Set when GTIMER4 expires */
+#define	 IMR0_GTINT3			BIT(27)	/* Set when GTIMER3 expires */
+#define	 IMR0_TBDER			BIT(26)	/* Transmit Beacon0 Error */
+#define	 IMR0_TBDOK			BIT(25)	/* Transmit Beacon0 OK */
+#define	 IMR0_TSF_BIT32_TOGGLE		BIT(24)	/* TSF Timer BIT32 toggle
+						   indication interrupt */
+#define	 IMR0_BCNDMAINT0		BIT(20)	/* Beacon DMA Interrupt 0 */
+#define	 IMR0_BCNDERR0			BIT(16)	/* Beacon Queue DMA Error 0 */
+#define	 IMR0_HSISR_IND_ON_INT		BIT(15)	/* HSISR Indicator (HSIMR &
+						   HSISR is true) */
+#define	 IMR0_BCNDMAINT_E		BIT(14)	/* Beacon DMA Interrupt
+						   Extension for Win7 */
+#define	 IMR0_ATIMEND			BIT(12)	/* CTWidnow End or
+						   ATIM Window End */
+#define	 IMR0_HISR1_IND_INT		BIT(11)	/* HISR1 Indicator
+						   (HISR1 & HIMR1 is true) */
+#define	 IMR0_C2HCMD			BIT(10)	/* CPU to Host Command INT
+						   Status, Write 1 to clear */
+#define	 IMR0_CPWM2			BIT(9)	/* CPU power Mode exchange INT
+						   Status, Write 1 to clear */
+#define	 IMR0_CPWM			BIT(8)	/* CPU power Mode exchange INT
+						   Status, Write 1 to clear */
+#define	 IMR0_HIGHDOK			BIT(7)	/* High Queue DMA OK */
+#define	 IMR0_MGNTDOK			BIT(6)	/* Management Queue DMA OK */
+#define	 IMR0_BKDOK			BIT(5)	/* AC_BK DMA OK */
+#define	 IMR0_BEDOK			BIT(4)	/* AC_BE DMA OK */
+#define	 IMR0_VIDOK			BIT(3)	/* AC_VI DMA OK */
+#define	 IMR0_VODOK			BIT(2)	/* AC_VO DMA OK */
+#define	 IMR0_RDU			BIT(1)	/* Rx Descriptor Unavailable */
+#define	 IMR0_ROK			BIT(0)	/* Receive DMA OK */
+#define REG_HISR0			0x00b4
+#define REG_HIMR1			0x00b8
+#define	 IMR1_BCNDMAINT7		BIT(27)	/* Beacon DMA Interrupt 7 */
+#define	 IMR1_BCNDMAINT6		BIT(26)	/* Beacon DMA Interrupt 6 */
+#define	 IMR1_BCNDMAINT5		BIT(25)	/* Beacon DMA Interrupt 5 */
+#define	 IMR1_BCNDMAINT4		BIT(24)	/* Beacon DMA Interrupt 4 */
+#define	 IMR1_BCNDMAINT3		BIT(23)	/* Beacon DMA Interrupt 3 */
+#define	 IMR1_BCNDMAINT2		BIT(22)	/* Beacon DMA Interrupt 2 */
+#define	 IMR1_BCNDMAINT1		BIT(21)	/* Beacon DMA Interrupt 1 */
+#define	 IMR1_BCNDERR7			BIT(20)	/* Beacon Queue DMA Err Int 7 */
+#define	 IMR1_BCNDERR6			BIT(19)	/* Beacon Queue DMA Err Int 6 */
+#define	 IMR1_BCNDERR5			BIT(18)	/* Beacon Queue DMA Err Int 5 */
+#define	 IMR1_BCNDERR4			BIT(17)	/* Beacon Queue DMA Err Int 4 */
+#define	 IMR1_BCNDERR3			BIT(16)	/* Beacon Queue DMA Err Int 3 */
+#define	 IMR1_BCNDERR2			BIT(15)	/* Beacon Queue DMA Err Int 2 */
+#define	 IMR1_BCNDERR1			BIT(14)	/* Beacon Queue DMA Err Int 1 */
+#define	 IMR1_ATIMEND_E			BIT(13)	/* ATIM Window End Extension
+						   for Win7 */
+#define	 IMR1_TXERR			BIT(11)	/* Tx Error Flag Int Status,
+						   write 1 to clear */
+#define	 IMR1_RXERR			BIT(10)	/* Rx Error Flag Int Status,
+						   write 1 to clear */
+#define	 IMR1_TXFOVW			BIT(9)	/* Transmit FIFO Overflow */
+#define	 IMR1_RXFOVW			BIT(8)	/* Receive FIFO Overflow */
+#define REG_HISR1			0x00bc
+
+/*  Host suspend counter on FPGA platform */
+#define REG_HOST_SUSP_CNT		0x00bc
+/*  Efuse access protection for RTL8723 */
+#define REG_EFUSE_ACCESS		0x00cf
+#define REG_BIST_SCAN			0x00d0
+#define REG_BIST_RPT			0x00d4
+#define REG_BIST_ROM_RPT		0x00d8
+#define REG_RSVD_4			0x00dc
+#define REG_USB_SIE_INTF		0x00e0
+#define REG_PCIE_MIO_INTF		0x00e4
+#define REG_PCIE_MIO_INTD		0x00e8
+#define REG_HPON_FSM			0x00ec
+#define  HPON_FSM_BONDING_MASK		(BIT(22) | BIT(23))
+#define  HPON_FSM_BONDING_1T2R		BIT(22)
+#define REG_SYS_CFG			0x00f0
+#define  SYS_CFG_XCLK_VLD		BIT(0)
+#define  SYS_CFG_ACLK_VLD		BIT(1)
+#define  SYS_CFG_UCLK_VLD		BIT(2)
+#define  SYS_CFG_PCLK_VLD		BIT(3)
+#define  SYS_CFG_PCIRSTB		BIT(4)
+#define  SYS_CFG_V15_VLD		BIT(5)
+#define  SYS_CFG_TRP_B15V_EN		BIT(7)
+#define  SYS_CFG_SW_OFFLOAD_EN		BIT(7)	/* For chips with IOL support */
+#define  SYS_CFG_SIC_IDLE		BIT(8)
+#define  SYS_CFG_BD_MAC2		BIT(9)
+#define  SYS_CFG_BD_MAC1		BIT(10)
+#define  SYS_CFG_IC_MACPHY_MODE		BIT(11)
+#define  SYS_CFG_CHIP_VER		(BIT(12) | BIT(13) | BIT(14) | BIT(15))
+#define  SYS_CFG_BT_FUNC		BIT(16)
+#define  SYS_CFG_VENDOR_ID		BIT(19)
+#define  SYS_CFG_VENDOR_EXT_MASK	(BIT(18) | BIT(19))
+#define   SYS_CFG_VENDOR_ID_TSMC	0
+#define   SYS_CFG_VENDOR_ID_SMIC	BIT(18)
+#define   SYS_CFG_VENDOR_ID_UMC		BIT(19)
+#define  SYS_CFG_PAD_HWPD_IDN		BIT(22)
+#define  SYS_CFG_TRP_VAUX_EN		BIT(23)
+#define  SYS_CFG_TRP_BT_EN		BIT(24)
+#define  SYS_CFG_SPS_LDO_SEL		BIT(24)	/* 8192eu */
+#define  SYS_CFG_BD_PKG_SEL		BIT(25)
+#define  SYS_CFG_BD_HCI_SEL		BIT(26)
+#define  SYS_CFG_TYPE_ID		BIT(27)
+#define  SYS_CFG_RTL_ID			BIT(23) /*  TestChip ID,
+						    1:Test(RLE); 0:MP(RL) */
+#define  SYS_CFG_SPS_SEL		BIT(24) /*  1:LDO regulator mode;
+						    0:Switching regulator mode*/
+#define  SYS_CFG_CHIP_VERSION_MASK	0xf000	/* Bit 12 - 15 */
+
+#define REG_GPIO_OUTSTS			0x00f4	/*  For RTL8723 only. */
+#define  GPIO_EFS_HCI_SEL		(BIT(0) | BIT(1))
+#define  GPIO_PAD_HCI_SEL		(BIT(2) | BIT(3))
+#define  GPIO_HCI_SEL			(BIT(4) | BIT(5))
+#define  GPIO_PKG_SEL_HCI		BIT(6)
+#define  GPIO_FEN_GPS			BIT(7)
+#define  GPIO_FEN_BT			BIT(8)
+#define  GPIO_FEN_WL			BIT(9)
+#define  GPIO_FEN_PCI			BIT(10)
+#define  GPIO_FEN_USB			BIT(11)
+#define  GPIO_BTRF_HWPDN_N		BIT(12)
+#define  GPIO_WLRF_HWPDN_N		BIT(13)
+#define  GPIO_PDN_BT_N			BIT(14)
+#define  GPIO_PDN_GPS_N			BIT(15)
+#define  GPIO_BT_CTL_HWPDN		BIT(16)
+#define  GPIO_GPS_CTL_HWPDN		BIT(17)
+#define  GPIO_PPHY_SUSB			BIT(20)
+#define  GPIO_UPHY_SUSB			BIT(21)
+#define  GPIO_PCI_SUSEN			BIT(22)
+#define  GPIO_USB_SUSEN			BIT(23)
+#define  GPIO_RF_RL_ID			(BIT(31) | BIT(30) | BIT(29) | BIT(28))
+
+#define REG_SYS_CFG2			0x00fc	/* 8192eu */
+
+/* 0x0100 ~ 0x01FF	MACTOP General Configuration */
+#define REG_CR				0x0100
+#define  CR_HCI_TXDMA_ENABLE		BIT(0)
+#define  CR_HCI_RXDMA_ENABLE		BIT(1)
+#define  CR_TXDMA_ENABLE		BIT(2)
+#define  CR_RXDMA_ENABLE		BIT(3)
+#define  CR_PROTOCOL_ENABLE		BIT(4)
+#define  CR_SCHEDULE_ENABLE		BIT(5)
+#define  CR_MAC_TX_ENABLE		BIT(6)
+#define  CR_MAC_RX_ENABLE		BIT(7)
+#define  CR_SW_BEACON_ENABLE		BIT(8)
+#define  CR_SECURITY_ENABLE		BIT(9)
+#define  CR_CALTIMER_ENABLE		BIT(10)
+
+/* Media Status Register */
+#define REG_MSR				0x0102
+#define  MSR_LINKTYPE_MASK		0x3
+#define  MSR_LINKTYPE_NONE		0x0
+#define  MSR_LINKTYPE_ADHOC		0x1
+#define  MSR_LINKTYPE_STATION		0x2
+#define  MSR_LINKTYPE_AP		0x3
+
+#define REG_PBP				0x0104
+#define  PBP_PAGE_SIZE_RX_SHIFT		0
+#define  PBP_PAGE_SIZE_TX_SHIFT		4
+#define  PBP_PAGE_SIZE_64		0x0
+#define  PBP_PAGE_SIZE_128		0x1
+#define  PBP_PAGE_SIZE_256		0x2
+#define  PBP_PAGE_SIZE_512		0x3
+#define  PBP_PAGE_SIZE_1024		0x4
+
+/* 8188eu IOL magic */
+#define REG_PKT_BUF_ACCESS_CTRL		0x0106
+#define  PKT_BUF_ACCESS_CTRL_TX		0x69
+#define  PKT_BUF_ACCESS_CTRL_RX		0xa5
+
+#define REG_TRXDMA_CTRL			0x010c
+#define  TRXDMA_CTRL_RXDMA_AGG_EN	BIT(2)
+#define  TRXDMA_CTRL_VOQ_SHIFT		4
+#define  TRXDMA_CTRL_VIQ_SHIFT		6
+#define  TRXDMA_CTRL_BEQ_SHIFT		8
+#define  TRXDMA_CTRL_BKQ_SHIFT		10
+#define  TRXDMA_CTRL_MGQ_SHIFT		12
+#define  TRXDMA_CTRL_HIQ_SHIFT		14
+#define  TRXDMA_CTRL_VOQ_SHIFT_8192F	4
+#define  TRXDMA_CTRL_VIQ_SHIFT_8192F	7
+#define  TRXDMA_CTRL_BEQ_SHIFT_8192F	10
+#define  TRXDMA_CTRL_BKQ_SHIFT_8192F	13
+#define  TRXDMA_CTRL_MGQ_SHIFT_8192F	16
+#define  TRXDMA_CTRL_HIQ_SHIFT_8192F	19
+#define  TRXDMA_QUEUE_LOW		1
+#define  TRXDMA_QUEUE_NORMAL		2
+#define  TRXDMA_QUEUE_HIGH		3
+
+#define REG_TRXFF_BNDY			0x0114
+#define REG_TRXFF_STATUS		0x0118
+#define REG_RXFF_PTR			0x011c
+#define REG_HIMR			0x0120
+#define REG_HISR			0x0124
+#define REG_HIMRE			0x0128
+#define REG_HISRE			0x012c
+#define REG_CPWM			0x012f
+#define REG_FWIMR			0x0130
+#define REG_FWISR			0x0134
+#define REG_FTIMR			0x0138
+#define REG_PKTBUF_DBG_CTRL		0x0140
+#define REG_PKTBUF_DBG_DATA_L		0x0144
+#define REG_PKTBUF_DBG_DATA_H		0x0148
+
+#define REG_TC0_CTRL			0x0150
+#define REG_TC1_CTRL			0x0154
+#define REG_TC2_CTRL			0x0158
+#define REG_TC3_CTRL			0x015c
+#define REG_TC4_CTRL			0x0160
+#define REG_TCUNIT_BASE			0x0164
+#define REG_MBIST_START			0x0174
+#define REG_MBIST_DONE			0x0178
+#define REG_MBIST_FAIL			0x017c
+/* 8188EU */
+#define REG_32K_CTRL			0x0194
+#define REG_C2HEVT_MSG_NORMAL		0x01a0
+/* 8192EU/8723BU/8812 */
+#define REG_C2HEVT_CMD_ID_8723B		0x01ae
+#define REG_C2HEVT_CLEAR		0x01af
+#define REG_C2HEVT_MSG_TEST		0x01b8
+#define REG_MCUTST_1			0x01c0
+#define REG_FMTHR			0x01c8
+#define REG_HMTFR			0x01cc
+#define REG_HMBOX_0			0x01d0
+#define REG_HMBOX_1			0x01d4
+#define REG_HMBOX_2			0x01d8
+#define REG_HMBOX_3			0x01dc
+
+#define REG_LLT_INIT			0x01e0
+#define  LLT_OP_INACTIVE		0x0
+#define  LLT_OP_WRITE			(0x1 << 30)
+#define  LLT_OP_READ			(0x2 << 30)
+#define  LLT_OP_MASK			(0x3 << 30)
+
+#define REG_BB_ACCESS_CTRL		0x01e8
+#define REG_BB_ACCESS_DATA		0x01ec
+
+#define REG_HMBOX_EXT0_8723B		0x01f0
+#define REG_HMBOX_EXT1_8723B		0x01f4
+#define REG_HMBOX_EXT2_8723B		0x01f8
+#define REG_HMBOX_EXT3_8723B		0x01fc
+
+/* 0x0200 ~ 0x027F	TXDMA Configuration */
+#define REG_RQPN			0x0200
+#define  RQPN_HI_PQ_SHIFT		0
+#define  RQPN_LO_PQ_SHIFT		8
+#define  RQPN_PUB_PQ_SHIFT		16
+#define  RQPN_LOAD			BIT(31)
+
+#define REG_FIFOPAGE			0x0204
+#define REG_TDECTRL			0x0208
+#define  BIT_BCN_VALID			BIT(16)
+
+#define REG_DWBCN0_CTRL_8188F		REG_TDECTRL
+
+#define REG_TXDMA_OFFSET_CHK		0x020c
+#define  TXDMA_OFFSET_DROP_DATA_EN	BIT(9)
+#define REG_TXDMA_STATUS		0x0210
+#define REG_RQPN_NPQ			0x0214
+#define  RQPN_NPQ_SHIFT			0
+#define  RQPN_EPQ_SHIFT			16
+
+#define REG_AUTO_LLT			0x0224
+#define  AUTO_LLT_INIT_LLT		BIT(16)
+
+#define REG_DWBCN1_CTRL_8723B		0x0228
+#define  BIT_SW_BCN_SEL			BIT(20)
+
+/* 0x0280 ~ 0x02FF	RXDMA Configuration */
+#define REG_RXDMA_AGG_PG_TH		0x0280	/* 0-7 : USB DMA size bits
+						   8-14: USB DMA timeout
+						   15  : Aggregation enable
+						         Only seems to be used
+							 on 8723bu/8192eu */
+#define  RXDMA_USB_AGG_ENABLE		BIT(31)
+#define REG_RXPKT_NUM			0x0284
+#define  RXPKT_NUM_RXDMA_IDLE		BIT(17)
+#define  RXPKT_NUM_RW_RELEASE_EN	BIT(18)
+#define REG_RXDMA_STATUS		0x0288
+
+/* Presumably only found on newer chips such as 8723bu */
+#define REG_RX_DMA_CTRL_8723B		0x0286
+#define REG_RXDMA_PRO_8723B		0x0290
+#define  RXDMA_PRO_DMA_MODE		BIT(1)		/* Set to 0x1. */
+#define  RXDMA_PRO_DMA_BURST_CNT	GENMASK(3, 2)	/* Set to 0x3. */
+#define  RXDMA_PRO_DMA_BURST_SIZE	GENMASK(5, 4)	/* Set to 0x1. */
+
+#define REG_EARLY_MODE_CONTROL_8710B	0x02bc
+
+#define REG_RF_BB_CMD_ADDR		0x02c0
+#define REG_RF_BB_CMD_DATA		0x02c4
+
+/*  spec version 11 */
+/* 0x0400 ~ 0x047F	Protocol Configuration */
+/* 8192c, 8192d */
+#define REG_VOQ_INFO			0x0400
+#define REG_VIQ_INFO			0x0404
+#define REG_BEQ_INFO			0x0408
+#define REG_BKQ_INFO			0x040c
+/* 8188e, 8723a, 8812a, 8821a, 8192e, 8723b */
+#define REG_Q0_INFO			0x400
+#define REG_Q1_INFO			0x404
+#define REG_Q2_INFO			0x408
+#define REG_Q3_INFO			0x40c
+
+#define REG_MGQ_INFO			0x0410
+#define REG_HGQ_INFO			0x0414
+#define REG_BCNQ_INFO			0x0418
+
+#define REG_CPU_MGQ_INFORMATION		0x041c
+#define REG_FWHW_TXQ_CTRL		0x0420
+#define  FWHW_TXQ_CTRL_AMPDU_RETRY	BIT(7)
+#define  FWHW_TXQ_CTRL_XMIT_MGMT_ACK	BIT(12)
+#define  EN_BCNQ_DL			BIT(22)
+
+#define REG_HWSEQ_CTRL			0x0423
+#define REG_TXPKTBUF_BCNQ_BDNY		0x0424
+#define REG_TXPKTBUF_MGQ_BDNY		0x0425
+#define REG_LIFETIME_EN			0x0426
+#define REG_MULTI_BCNQ_OFFSET		0x0427
+
+#define REG_SPEC_SIFS			0x0428
+#define  SPEC_SIFS_CCK_MASK		0x00ff
+#define  SPEC_SIFS_CCK_SHIFT		0
+#define  SPEC_SIFS_OFDM_MASK		0xff00
+#define  SPEC_SIFS_OFDM_SHIFT		8
+
+#define REG_RETRY_LIMIT			0x042a
+#define  RETRY_LIMIT_LONG_SHIFT		0
+#define  RETRY_LIMIT_LONG_MASK		0x003f
+#define  RETRY_LIMIT_SHORT_SHIFT	8
+#define  RETRY_LIMIT_SHORT_MASK		0x3f00
+
+#define REG_DARFRC			0x0430
+#define REG_RARFRC			0x0438
+#define REG_RESPONSE_RATE_SET		0x0440
+#define  RESPONSE_RATE_BITMAP_ALL	0xfffff
+#define  RESPONSE_RATE_RRSR_CCK_ONLY_1M	0xffff1
+#define  RESPONSE_RATE_RRSR_INIT_2G	0x15f
+#define  RESPONSE_RATE_RRSR_INIT_5G	0x150
+#define  RSR_1M				BIT(0)
+#define  RSR_2M				BIT(1)
+#define  RSR_5_5M			BIT(2)
+#define  RSR_11M			BIT(3)
+#define  RSR_6M				BIT(4)
+#define  RSR_9M				BIT(5)
+#define  RSR_12M			BIT(6)
+#define  RSR_18M			BIT(7)
+#define  RSR_24M			BIT(8)
+#define  RSR_36M			BIT(9)
+#define  RSR_48M			BIT(10)
+#define  RSR_54M			BIT(11)
+#define  RSR_MCS0			BIT(12)
+#define  RSR_MCS1			BIT(13)
+#define  RSR_MCS2			BIT(14)
+#define  RSR_MCS3			BIT(15)
+#define  RSR_MCS4			BIT(16)
+#define  RSR_MCS5			BIT(17)
+#define  RSR_MCS6			BIT(18)
+#define  RSR_MCS7			BIT(19)
+#define  RSR_RSC_LOWER_SUB_CHANNEL	BIT(21)	/* 0x200000 */
+#define  RSR_RSC_UPPER_SUB_CHANNEL	BIT(22)	/* 0x400000 */
+#define  RSR_RSC_BANDWIDTH_40M		(RSR_RSC_UPPER_SUB_CHANNEL | \
+					 RSR_RSC_LOWER_SUB_CHANNEL)
+#define  RSR_ACK_SHORT_PREAMBLE		BIT(23)
+
+#define REG_ARFR0			0x0444
+#define REG_ARFR1			0x0448
+#define REG_ARFR2			0x044c
+#define REG_ARFR3			0x0450
+#define REG_CCK_CHECK			0x0454
+#define BIT_BCN_PORT_SEL		BIT(5)
+#define REG_AMPDU_MAX_TIME_8723B	0x0456
+#define REG_AGGLEN_LMT			0x0458
+#define REG_AMPDU_MIN_SPACE		0x045c
+#define REG_TXPKTBUF_WMAC_LBK_BF_HD	0x045d
+#define REG_FAST_EDCA_CTRL		0x0460
+#define REG_RD_RESP_PKT_TH		0x0463
+#define REG_INIRTS_RATE_SEL		0x0480
+/* 8723bu */
+#define REG_DATA_SUBCHANNEL		0x0483
+/* 8723au */
+#define REG_INIDATA_RATE_SEL		0x0484
+/* MACID_SLEEP_1/3 for 8723b, 8192e, 8812a, 8821a */
+#define REG_MACID_SLEEP_3_8732B		0x0484
+#define REG_MACID_SLEEP_1_8732B		0x0488
+
+#define REG_POWER_STATUS		0x04a4
+#define REG_POWER_STAGE1		0x04b4
+#define REG_POWER_STAGE2		0x04b8
+#define REG_AMPDU_BURST_MODE_8723B	0x04bc
+#define REG_PKT_VO_VI_LIFE_TIME		0x04c0
+#define REG_PKT_BE_BK_LIFE_TIME		0x04c2
+#define REG_STBC_SETTING		0x04c4
+#define REG_QUEUE_CTRL			0x04c6
+#define REG_HT_SINGLE_AMPDU_8723B	0x04c7
+#define  HT_SINGLE_AMPDU_ENABLE		BIT(7)
+#define REG_PROT_MODE_CTRL		0x04c8
+#define REG_MAX_AGGR_NUM		0x04ca
+#define REG_RTS_MAX_AGGR_NUM		0x04cb
+#define REG_BAR_MODE_CTRL		0x04cc
+#define REG_RA_TRY_RATE_AGG_LMT		0x04cf
+/* MACID_DROP for 8723a */
+#define REG_MACID_DROP_8732A		0x04d0
+/* EARLY_MODE_CONTROL 8188e */
+#define REG_EARLY_MODE_CONTROL_8188E	0x04d0
+/* MACID_SLEEP_2 for 8723b, 8192e, 8812a, 8821a */
+#define REG_MACID_SLEEP_2_8732B		0x04d0
+#define REG_MACID_SLEEP			0x04d4
+#define REG_NQOS_SEQ			0x04dc
+#define REG_QOS_SEQ			0x04de
+#define REG_NEED_CPU_HANDLE		0x04e0
+#define REG_PKT_LOSE_RPT		0x04e1
+#define REG_PTCL_ERR_STATUS		0x04e2
+#define REG_TX_REPORT_CTRL		0x04ec
+#define  TX_REPORT_CTRL_TIMER_ENABLE	BIT(1)
+
+#define REG_TX_REPORT_TIME		0x04f0
+#define REG_DUMMY			0x04fc
+
+/* 0x0500 ~ 0x05FF	EDCA Configuration */
+#define REG_EDCA_VO_PARAM		0x0500
+#define REG_EDCA_VI_PARAM		0x0504
+#define REG_EDCA_BE_PARAM		0x0508
+#define REG_EDCA_BK_PARAM		0x050c
+#define  EDCA_PARAM_ECW_MIN_SHIFT	8
+#define  EDCA_PARAM_ECW_MAX_SHIFT	12
+#define  EDCA_PARAM_TXOP_SHIFT		16
+#define REG_BEACON_TCFG			0x0510
+#define REG_PIFS			0x0512
+#define REG_RDG_PIFS			0x0513
+#define REG_SIFS_CCK			0x0514
+#define REG_SIFS_OFDM			0x0516
+#define REG_TSFTR_SYN_OFFSET		0x0518
+#define REG_AGGR_BREAK_TIME		0x051a
+#define REG_SLOT			0x051b
+#define REG_TX_PTCL_CTRL		0x0520
+#define REG_TXPAUSE			0x0522
+#define REG_DIS_TXREQ_CLR		0x0523
+#define REG_RD_CTRL			0x0524
+#define REG_TBTT_PROHIBIT		0x0540
+#define REG_RD_NAV_NXT			0x0544
+#define REG_NAV_PROT_LEN		0x0546
+
+#define REG_BEACON_CTRL			0x0550
+#define REG_BEACON_CTRL_1		0x0551
+#define  BEACON_ATIM			BIT(0)
+#define  BEACON_CTRL_MBSSID		BIT(1)
+#define  BEACON_CTRL_TX_BEACON_RPT	BIT(2)
+#define  BEACON_FUNCTION_ENABLE		BIT(3)
+#define  BEACON_DISABLE_TSF_UPDATE	BIT(4)
+
+#define REG_MBID_NUM			0x0552
+#define REG_DUAL_TSF_RST		0x0553
+#define  DUAL_TSF_RESET_TSF0		BIT(0)
+#define  DUAL_TSF_RESET_TSF1		BIT(1)
+#define  DUAL_TSF_RESET_P2P		BIT(4)
+#define  DUAL_TSF_TX_OK			BIT(5)
+
+/*  The same as REG_MBSSID_BCN_SPACE */
+#define REG_BCN_INTERVAL		0x0554
+#define REG_MBSSID_BCN_SPACE		0x0554
+
+#define REG_DRIVER_EARLY_INT		0x0558
+#define  DRIVER_EARLY_INT_TIME		5
+
+#define REG_BEACON_DMA_TIME		0x0559
+#define  BEACON_DMA_ATIME_INT_TIME	2
+
+#define REG_ATIMWND			0x055a
+#define REG_USTIME_TSF_8723B		0x055c
+#define REG_BCN_MAX_ERR			0x055d
+#define REG_RXTSF_OFFSET_CCK		0x055e
+#define REG_RXTSF_OFFSET_OFDM		0x055f
+#define REG_TSFTR			0x0560
+#define REG_TSFTR1			0x0568
+#define REG_INIT_TSFTR			0x0564
+#define REG_ATIMWND_1			0x0570
+#define REG_PSTIMER			0x0580
+#define REG_TIMER0			0x0584
+#define REG_TIMER1			0x0588
+#define REG_ACM_HW_CTRL			0x05c0
+#define  ACM_HW_CTRL_BK			BIT(0)
+#define  ACM_HW_CTRL_BE			BIT(1)
+#define  ACM_HW_CTRL_VI			BIT(2)
+#define  ACM_HW_CTRL_VO			BIT(3)
+#define REG_ACM_RST_CTRL		0x05c1
+#define REG_ACMAVG			0x05c2
+#define REG_VO_ADMTIME			0x05c4
+#define REG_VI_ADMTIME			0x05c6
+#define REG_BE_ADMTIME			0x05c8
+#define REG_EDCA_RANDOM_GEN		0x05cc
+#define REG_SCH_TXCMD			0x05d0
+
+/* define REG_FW_TSF_SYNC_CNT		0x04a0 */
+#define REG_SCH_TX_CMD			0x05f8
+#define REG_FW_RESET_TSF_CNT_1		0x05fc
+#define REG_FW_RESET_TSF_CNT_0		0x05fd
+#define REG_FW_BCN_DIS_CNT		0x05fe
+
+/* 0x0600 ~ 0x07FF  WMAC Configuration */
+#define REG_APSD_CTRL			0x0600
+#define  APSD_CTRL_OFF			BIT(6)
+#define  APSD_CTRL_OFF_STATUS		BIT(7)
+#define REG_BW_OPMODE			0x0603
+#define  BW_OPMODE_20MHZ		BIT(2)
+#define  BW_OPMODE_5G			BIT(1)
+#define  BW_OPMODE_11J			BIT(0)
+
+#define REG_TCR				0x0604
+
+/* Receive Configuration Register */
+#define REG_RCR				0x0608
+#define  RCR_ACCEPT_AP			BIT(0)  /* Accept all unicast packet */
+#define  RCR_ACCEPT_PHYS_MATCH		BIT(1)  /* Accept phys match packet */
+#define  RCR_ACCEPT_MCAST		BIT(2)
+#define  RCR_ACCEPT_BCAST		BIT(3)
+#define  RCR_ACCEPT_ADDR3		BIT(4)  /* Accept address 3 match
+						 packet */
+#define  RCR_ACCEPT_PM			BIT(5)  /* Accept power management
+						 packet */
+#define  RCR_CHECK_BSSID_MATCH		BIT(6)  /* Accept BSSID match packet */
+#define  RCR_CHECK_BSSID_BEACON		BIT(7)  /* Accept BSSID match packet
+						 (Rx beacon, probe rsp) */
+#define  RCR_ACCEPT_CRC32		BIT(8)  /* Accept CRC32 error packet */
+#define  RCR_ACCEPT_ICV			BIT(9)  /* Accept ICV error packet */
+#define  RCR_ACCEPT_DATA_FRAME		BIT(11) /* Accept all data pkt or use
+						   REG_RXFLTMAP2 */
+#define  RCR_ACCEPT_CTRL_FRAME		BIT(12) /* Accept all control pkt or use
+						   REG_RXFLTMAP1 */
+#define  RCR_ACCEPT_MGMT_FRAME		BIT(13) /* Accept all mgmt pkt or use
+						   REG_RXFLTMAP0 */
+#define  RCR_HTC_LOC_CTRL		BIT(14) /* MFC<--HTC=1 MFC-->HTC=0 */
+#define  RCR_UC_DATA_PKT_INT_ENABLE	BIT(16) /* Enable unicast data packet
+						   interrupt */
+#define  RCR_BM_DATA_PKT_INT_ENABLE	BIT(17) /* Enable broadcast data packet
+						   interrupt */
+#define  RCR_TIM_PARSER_ENABLE		BIT(18) /* Enable RX beacon TIM parser*/
+#define  RCR_MFBEN			BIT(22)
+#define  RCR_LSIG_ENABLE		BIT(23) /* Enable LSIG TXOP Protection
+						   function. Search KEYCAM for
+						   each rx packet to check if
+						   LSIGEN bit is set. */
+#define  RCR_MULTI_BSSID_ENABLE		BIT(24) /* Enable Multiple BssId */
+#define  RCR_FORCE_ACK			BIT(26)
+#define  RCR_ACCEPT_BA_SSN		BIT(27) /* Accept BA SSN */
+#define  RCR_APPEND_PHYSTAT		BIT(28)
+#define  RCR_APPEND_ICV			BIT(29)
+#define  RCR_APPEND_MIC			BIT(30)
+#define  RCR_APPEND_FCS			BIT(31) /* WMAC append FCS after */
+
+#define REG_RX_PKT_LIMIT		0x060c
+#define REG_RX_DLK_TIME			0x060d
+#define REG_RX_DRVINFO_SZ		0x060f
+
+#define REG_MACID			0x0610
+#define REG_BSSID			0x0618
+#define REG_MAR				0x0620
+#define REG_MBIDCAMCFG			0x0628
+
+#define REG_USTIME_EDCA			0x0638
+#define REG_MAC_SPEC_SIFS		0x063a
+
+/*  20100719 Joseph: Hardware register definition change. (HW datasheet v54) */
+	/*  [15:8]SIFS_R2T_OFDM, [7:0]SIFS_R2T_CCK */
+#define REG_R2T_SIFS			0x063c
+	/*  [15:8]SIFS_T2T_OFDM, [7:0]SIFS_T2T_CCK */
+#define REG_T2T_SIFS			0x063e
+#define REG_ACKTO			0x0640
+#define REG_CTS2TO			0x0641
+#define REG_EIFS			0x0642
+
+/* WMA, BA, CCX */
+#define REG_NAV_CTRL			0x0650
+/* In units of 128us */
+#define REG_NAV_UPPER			0x0652
+#define  NAV_UPPER_UNIT			128
+
+#define REG_BACAMCMD			0x0654
+#define REG_BACAMCONTENT		0x0658
+#define REG_LBDLY			0x0660
+#define REG_FWDLY			0x0661
+#define REG_RXERR_RPT			0x0664
+#define REG_WMAC_TRXPTCL_CTL		0x0668
+#define  WMAC_TRXPTCL_CTL_BW_MASK	(BIT(7) | BIT(8))
+#define  WMAC_TRXPTCL_CTL_BW_20		0
+#define  WMAC_TRXPTCL_CTL_BW_40		BIT(7)
+#define  WMAC_TRXPTCL_CTL_BW_80		BIT(8)
+
+/*  Security */
+#define REG_CAM_CMD			0x0670
+#define  CAM_CMD_POLLING		BIT(31)
+#define  CAM_CMD_WRITE			BIT(16)
+#define  CAM_CMD_KEY_SHIFT		3
+#define REG_CAM_WRITE			0x0674
+#define  CAM_WRITE_VALID		BIT(15)
+#define REG_CAM_READ			0x0678
+#define REG_CAM_DEBUG			0x067c
+#define REG_SECURITY_CFG		0x0680
+#define  SEC_CFG_TX_USE_DEFKEY		BIT(0)
+#define  SEC_CFG_RX_USE_DEFKEY		BIT(1)
+#define  SEC_CFG_TX_SEC_ENABLE		BIT(2)
+#define  SEC_CFG_RX_SEC_ENABLE		BIT(3)
+#define  SEC_CFG_SKBYA2			BIT(4)
+#define  SEC_CFG_NO_SKMC		BIT(5)
+#define  SEC_CFG_TXBC_USE_DEFKEY	BIT(6)
+#define  SEC_CFG_RXBC_USE_DEFKEY	BIT(7)
+
+/*  Power */
+#define REG_WOW_CTRL			0x0690
+#define REG_PSSTATUS			0x0691
+#define REG_PS_RX_INFO			0x0692
+#define REG_LPNAV_CTRL			0x0694
+#define REG_WKFMCAM_CMD			0x0698
+#define REG_WKFMCAM_RWD			0x069c
+
+/*
+ * RX Filters: each bit corresponds to the numerical value of the subtype.
+ * If it is set the subtype frame type is passed. The filter is only used when
+ * the RCR_ACCEPT_DATA_FRAME, RCR_ACCEPT_CTRL_FRAME, RCR_ACCEPT_MGMT_FRAME bit
+ * in the RCR are low.
+ *
+ * Example: Beacon subtype is binary 1000 which is decimal 8 so we have to set
+ * bit 8 (0x100) in REG_RXFLTMAP0 to enable reception.
+ */
+#define REG_RXFLTMAP0			0x06a0	/* Management frames */
+#define REG_RXFLTMAP1			0x06a2	/* Control frames */
+#define REG_RXFLTMAP2			0x06a4	/* Data frames */
+
+#define REG_BCN_PSR_RPT			0x06a8
+#define REG_CALB32K_CTRL		0x06ac
+#define REG_PKT_MON_CTRL		0x06b4
+#define REG_BT_COEX_TABLE1		0x06c0
+#define REG_BT_COEX_TABLE2		0x06c4
+#define REG_BT_COEX_TABLE3		0x06c8
+#define REG_BT_COEX_TABLE4		0x06cc
+#define REG_WMAC_RESP_TXINFO		0x06d8
+
+#define REG_MACID1			0x0700
+#define REG_BSSID1			0x0708
+
+/*
+ * This seems to be 8723bu specific
+ */
+#define REG_BT_CONTROL_8723BU		0x0764
+#define  BT_CONTROL_BT_GRANT		BIT(12)
+
+#define REG_PORT_CONTROL_8710B		0x076d
+#define REG_WLAN_ACT_CONTROL_8723B	0x076e
+
+#define REG_FPGA0_RF_MODE		0x0800
+#define  FPGA_RF_MODE			BIT(0)
+#define  FPGA_RF_MODE_JAPAN		BIT(1)
+#define  FPGA_RF_MODE_CCK		BIT(24)
+#define  FPGA_RF_MODE_OFDM		BIT(25)
+
+#define REG_FPGA0_TX_INFO		0x0804
+#define  FPGA0_TX_INFO_OFDM_PATH_A	BIT(0)
+#define  FPGA0_TX_INFO_OFDM_PATH_B	BIT(1)
+#define  FPGA0_TX_INFO_OFDM_PATH_C	BIT(2)
+#define  FPGA0_TX_INFO_OFDM_PATH_D	BIT(3)
+#define REG_FPGA0_PSD_FUNC		0x0808
+#define REG_FPGA0_TX_GAIN		0x080c
+#define REG_FPGA0_RF_TIMING1		0x0810
+#define REG_FPGA0_RF_TIMING2		0x0814
+#define REG_FPGA0_POWER_SAVE		0x0818
+#define  FPGA0_PS_LOWER_CHANNEL		BIT(26)
+#define  FPGA0_PS_UPPER_CHANNEL		BIT(27)
+
+#define REG_FPGA0_XA_HSSI_PARM1		0x0820	/* RF 3 wire register */
+#define  FPGA0_HSSI_PARM1_PI		BIT(8)
+#define REG_FPGA0_XA_HSSI_PARM2		0x0824
+#define REG_FPGA0_XB_HSSI_PARM1		0x0828
+#define REG_FPGA0_XB_HSSI_PARM2		0x082c
+#define  FPGA0_HSSI_3WIRE_DATA_LEN	0x800
+#define  FPGA0_HSSI_3WIRE_ADDR_LEN	0x400
+#define  FPGA0_HSSI_PARM2_ADDR_SHIFT	23
+#define  FPGA0_HSSI_PARM2_ADDR_MASK	0x7f800000	/* 0xff << 23 */
+#define  FPGA0_HSSI_PARM2_CCK_HIGH_PWR	BIT(9)
+#define  FPGA0_HSSI_PARM2_EDGE_READ	BIT(31)
+
+#define REG_TX_AGC_B_RATE18_06		0x0830
+#define REG_TX_AGC_B_RATE54_24		0x0834
+#define REG_TX_AGC_B_CCK1_55_MCS32	0x0838
+#define REG_TX_AGC_B_MCS03_MCS00	0x083c
+
+#define REG_FPGA0_XA_LSSI_PARM		0x0840
+#define REG_FPGA0_XB_LSSI_PARM		0x0844
+#define  FPGA0_LSSI_PARM_ADDR_SHIFT	20
+#define  FPGA0_LSSI_PARM_ADDR_MASK	0x0ff00000
+#define  FPGA0_LSSI_PARM_DATA_MASK	0x000fffff
+
+#define REG_TX_AGC_B_MCS07_MCS04	0x0848
+#define REG_TX_AGC_B_MCS11_MCS08	0x084c
+
+#define REG_FPGA0_XCD_SWITCH_CTRL	0x085c
+
+#define REG_FPGA0_XA_RF_INT_OE		0x0860	/* RF Channel switch */
+#define REG_FPGA0_XB_RF_INT_OE		0x0864
+#define  FPGA0_INT_OE_ANTENNA_AB_OPEN	0x000
+#define  FPGA0_INT_OE_ANTENNA_A		BIT(8)
+#define  FPGA0_INT_OE_ANTENNA_B		BIT(9)
+#define  FPGA0_INT_OE_ANTENNA_MASK	(FPGA0_INT_OE_ANTENNA_A | \
+					 FPGA0_INT_OE_ANTENNA_B)
+
+#define REG_TX_AGC_B_MCS15_MCS12	0x0868
+#define REG_TX_AGC_B_CCK11_A_CCK2_11	0x086c
+
+#define REG_FPGA0_XAB_RF_SW_CTRL	0x0870
+#define REG_FPGA0_XA_RF_SW_CTRL		0x0870	/* 16 bit */
+#define REG_FPGA0_XB_RF_SW_CTRL		0x0872	/* 16 bit */
+#define REG_FPGA0_XCD_RF_SW_CTRL	0x0874
+#define REG_FPGA0_XC_RF_SW_CTRL		0x0874	/* 16 bit */
+#define REG_FPGA0_XD_RF_SW_CTRL		0x0876	/* 16 bit */
+#define  FPGA0_RF_3WIRE_DATA		BIT(0)
+#define  FPGA0_RF_3WIRE_CLOC		BIT(1)
+#define  FPGA0_RF_3WIRE_LOAD		BIT(2)
+#define  FPGA0_RF_3WIRE_RW		BIT(3)
+#define  FPGA0_RF_3WIRE_MASK		0xf
+#define  FPGA0_RF_RFENV			BIT(4)
+#define  FPGA0_RF_TRSW			BIT(5)	/* Useless now */
+#define  FPGA0_RF_TRSWB			BIT(6)
+#define  FPGA0_RF_ANTSW			BIT(8)
+#define  FPGA0_RF_ANTSWB		BIT(9)
+#define  FPGA0_RF_PAPE			BIT(10)
+#define  FPGA0_RF_PAPE5G		BIT(11)
+#define  FPGA0_RF_BD_CTRL_SHIFT		16
+
+#define REG_FPGA0_XAB_RF_PARM		0x0878	/* Antenna select path in ODM */
+#define REG_FPGA0_XA_RF_PARM		0x0878	/* 16 bit */
+#define REG_FPGA0_XB_RF_PARM		0x087a	/* 16 bit */
+#define REG_FPGA0_XCD_RF_PARM		0x087c
+#define REG_FPGA0_XC_RF_PARM		0x087c	/* 16 bit */
+#define REG_FPGA0_XD_RF_PARM		0x087e	/* 16 bit */
+#define  FPGA0_RF_PARM_RFA_ENABLE	BIT(1)
+#define  FPGA0_RF_PARM_RFB_ENABLE	BIT(17)
+#define  FPGA0_RF_PARM_CLK_GATE		BIT(31)
+
+#define REG_FPGA0_ANALOG1		0x0880
+#define REG_FPGA0_ANALOG2		0x0884
+#define  FPGA0_ANALOG2_20MHZ		BIT(10)
+#define REG_FPGA0_ANALOG3		0x0888
+#define REG_FPGA0_ANALOG4		0x088c
+
+#define REG_NHM_TH9_TH10_8723B		0x0890
+#define REG_NHM_TIMER_8723B		0x0894
+#define REG_NHM_TH3_TO_TH0_8723B	0x0898
+#define REG_NHM_TH7_TO_TH4_8723B	0x089c
+
+#define REG_FPGA0_XA_LSSI_READBACK	0x08a0	/* Tranceiver LSSI Readback */
+#define REG_FPGA0_XB_LSSI_READBACK	0x08a4
+#define REG_FPGA0_PSD_REPORT		0x08b4
+#define REG_HSPI_XA_READBACK		0x08b8	/* Transceiver A HSPI read */
+#define REG_HSPI_XB_READBACK		0x08bc	/* Transceiver B HSPI read */
+
+#define REG_FPGA1_RF_MODE		0x0900
+
+#define REG_FPGA1_TX_INFO		0x090c
+#define  FPGA1_TX_ANT_MASK		0x0000000f
+#define  FPGA1_TX_ANT_L_MASK		0x000000f0
+#define  FPGA1_TX_ANT_NON_HT_MASK	0x00000f00
+#define  FPGA1_TX_ANT_HT1_MASK		0x0000f000
+#define  FPGA1_TX_ANT_HT2_MASK		0x000f0000
+#define  FPGA1_TX_ANT_HT_S1_MASK	0x00f00000
+#define  FPGA1_TX_ANT_NON_HT_S1_MASK	0x0f000000
+#define  FPGA1_TX_OFDM_TXSC_MASK	0x30000000
+
+#define REG_ANT_MAPPING1		0x0914
+#define REG_RFE_OPT			0x0920
+#define REG_DPDT_CTRL			0x092c	/* 8723BU */
+#define REG_RFE_CTRL_ANTA_SRC		0x0930	/* 8723BU */
+#define REG_RFE_CTRL_ANT_SRC1		0x0934
+#define REG_RFE_CTRL_ANT_SRC2		0x0938
+#define REG_RFE_CTRL_ANT_SRC3		0x093c
+#define REG_RFE_PATH_SELECT		0x0940	/* 8723BU */
+#define REG_RFE_BUFFER			0x0944	/* 8723BU */
+#define REG_S0S1_PATH_SWITCH		0x0948	/* 8723BU */
+#define REG_RX_DFIR_MOD_97F		0x0948
+#define REG_OFDM_RX_DFIR		0x954
+#define REG_RFE_OPT62			0x0968
+
+#define REG_CCK0_SYSTEM			0x0a00
+#define  CCK0_SIDEBAND			BIT(4)
+
+#define REG_CCK0_AFE_SETTING		0x0a04
+#define  CCK0_AFE_RX_MASK		0x0f000000
+#define  CCK0_AFE_TX_MASK		0xf0000000
+#define  CCK0_AFE_RX_ANT_A		0
+#define  CCK0_AFE_RX_ANT_B		BIT(26)
+#define  CCK0_AFE_RX_ANT_C		BIT(27)
+#define  CCK0_AFE_RX_ANT_D		(BIT(26) | BIT(27))
+#define  CCK0_AFE_RX_ANT_OPTION_A	0
+#define  CCK0_AFE_RX_ANT_OPTION_B	BIT(24)
+#define  CCK0_AFE_RX_ANT_OPTION_C	BIT(25)
+#define  CCK0_AFE_RX_ANT_OPTION_D	(BIT(24) | BIT(25))
+#define  CCK0_AFE_TX_ANT_A		BIT(31)
+#define  CCK0_AFE_TX_ANT_B		BIT(30)
+
+#define REG_CCK_ANTDIV_PARA2		0x0a04
+#define REG_BB_POWER_SAVE4		0x0a74
+
+/* 8188eu */
+#define REG_LNA_SWITCH			0x0b2c
+#define  LNA_SWITCH_DISABLE_CSCG	BIT(22)
+#define  LNA_SWITCH_OUTPUT_CG		BIT(31)
+
+#define REG_CCK_PD_THRESH			0x0a0a
+#define  CCK_PD_TYPE1_LV0_TH		0x40
+#define  CCK_PD_TYPE1_LV1_TH		0x83
+#define  CCK_PD_TYPE1_LV2_TH		0xcd
+#define  CCK_PD_TYPE1_LV3_TH		0xdd
+#define  CCK_PD_TYPE1_LV4_TH		0xed
+
+#define REG_CCK0_TX_FILTER1		0x0a20
+#define REG_CCK0_TX_FILTER2		0x0a24
+#define REG_CCK0_DEBUG_PORT		0x0a28	/* debug port and Tx filter3 */
+#define REG_AGC_RPT			0xa80
+#define  AGC_RPT_CCK			BIT(7)
+#define REG_CCK0_TX_FILTER3		0x0aac
+
+#define REG_CONFIG_ANT_A		0x0b68
+#define REG_CONFIG_ANT_B		0x0b6c
+
+#define REG_OFDM0_TRX_PATH_ENABLE	0x0c04
+#define OFDM_RF_PATH_RX_MASK		0x0f
+#define OFDM_RF_PATH_RX_A		BIT(0)
+#define OFDM_RF_PATH_RX_B		BIT(1)
+#define OFDM_RF_PATH_RX_C		BIT(2)
+#define OFDM_RF_PATH_RX_D		BIT(3)
+#define OFDM_RF_PATH_TX_MASK		0xf0
+#define OFDM_RF_PATH_TX_A		BIT(4)
+#define OFDM_RF_PATH_TX_B		BIT(5)
+#define OFDM_RF_PATH_TX_C		BIT(6)
+#define OFDM_RF_PATH_TX_D		BIT(7)
+
+#define REG_OFDM0_TR_MUX_PAR		0x0c08
+
+#define REG_OFDM0_FA_RSTC		0x0c0c
+
+#define REG_DOWNSAM_FACTOR		0x0c10
+
+#define REG_OFDM0_XA_RX_AFE		0x0c10
+#define REG_OFDM0_XA_RX_IQ_IMBALANCE	0x0c14
+#define REG_OFDM0_XB_RX_IQ_IMBALANCE	0x0c1c
+
+#define REG_OFDM0_ENERGY_CCA_THRES	0x0c4c
+
+#define REG_OFDM0_RX_D_SYNC_PATH	0x0c40
+#define  OFDM0_SYNC_PATH_NOTCH_FILTER	BIT(1)
+
+#define REG_OFDM0_XA_AGC_CORE1		0x0c50
+#define REG_OFDM0_XA_AGC_CORE2		0x0c54
+#define REG_OFDM0_XB_AGC_CORE1		0x0c58
+#define REG_OFDM0_XB_AGC_CORE2		0x0c5c
+#define REG_OFDM0_XC_AGC_CORE1		0x0c60
+#define REG_OFDM0_XC_AGC_CORE2		0x0c64
+#define REG_OFDM0_XD_AGC_CORE1		0x0c68
+#define REG_OFDM0_XD_AGC_CORE2		0x0c6c
+#define  OFDM0_X_AGC_CORE1_IGI_MASK	0x0000007F
+
+#define REG_OFDM0_AGC_PARM1		0x0c70
+
+#define REG_OFDM0_AGC_RSSI_TABLE	0x0c78
+
+#define REG_OFDM0_XA_TX_IQ_IMBALANCE	0x0c80
+#define REG_OFDM0_XB_TX_IQ_IMBALANCE	0x0c88
+#define REG_OFDM0_XC_TX_IQ_IMBALANCE	0x0c90
+#define REG_OFDM0_XD_TX_IQ_IMBALANCE	0x0c98
+
+#define REG_OFDM0_XC_TX_AFE		0x0c94
+#define REG_OFDM0_XD_TX_AFE		0x0c9c
+
+#define REG_OFDM0_RX_IQ_EXT_ANTA	0x0ca0
+
+/* 8188eu */
+#define REG_ANTDIV_PARA1		0x0ca4
+
+#define REG_RXIQB_EXT			0x0ca8
+
+/* 8723bu */
+#define REG_OFDM0_TX_PSDO_NOISE_WEIGHT	0x0ce4
+
+#define REG_OFDM1_LSTF			0x0d00
+#define  OFDM_LSTF_PRIME_CH_LOW		BIT(10)
+#define  OFDM_LSTF_PRIME_CH_HIGH	BIT(11)
+#define  OFDM_LSTF_PRIME_CH_MASK	(OFDM_LSTF_PRIME_CH_LOW | \
+					 OFDM_LSTF_PRIME_CH_HIGH)
+#define  OFDM_LSTF_CONTINUE_TX		BIT(28)
+#define  OFDM_LSTF_SINGLE_CARRIER	BIT(29)
+#define  OFDM_LSTF_SINGLE_TONE		BIT(30)
+#define  OFDM_LSTF_MASK			0x70000000
+
+#define REG_OFDM1_TRX_PATH_ENABLE	0x0d04
+#define REG_OFDM1_CFO_TRACKING		0x0d2c
+#define  CFO_TRACKING_ATC_STATUS	BIT(11)
+#define REG_OFDM1_CSI_FIX_MASK1		0x0d40
+#define REG_OFDM1_CSI_FIX_MASK2		0x0d44
+
+#define REG_ANAPWR1			0x0d94
+
+#define REG_TX_AGC_A_RATE18_06		0x0e00
+#define REG_TX_AGC_A_RATE54_24		0x0e04
+#define REG_TX_AGC_A_CCK1_MCS32		0x0e08
+#define REG_TX_AGC_A_MCS03_MCS00	0x0e10
+#define REG_TX_AGC_A_MCS07_MCS04	0x0e14
+#define REG_TX_AGC_A_MCS11_MCS08	0x0e18
+#define REG_TX_AGC_A_MCS15_MCS12	0x0e1c
+
+#define REG_NP_ANTA			0x0e20
+
+#define REG_TAP_UPD_97F			0x0e24
+
+#define REG_FPGA0_IQK			0x0e28
+
+#define REG_TX_IQK_TONE_A		0x0e30
+#define REG_RX_IQK_TONE_A		0x0e34
+#define REG_TX_IQK_PI_A			0x0e38
+#define REG_RX_IQK_PI_A			0x0e3c
+
+#define REG_TX_IQK			0x0e40
+#define REG_RX_IQK			0x0e44
+#define REG_IQK_AGC_PTS			0x0e48
+#define REG_IQK_AGC_RSP			0x0e4c
+#define REG_TX_IQK_TONE_B		0x0e50
+#define REG_RX_IQK_TONE_B		0x0e54
+#define REG_TX_IQK_PI_B			0x0e58
+#define REG_RX_IQK_PI_B			0x0e5c
+#define REG_IQK_AGC_CONT		0x0e60
+
+#define REG_BLUETOOTH			0x0e6c
+#define REG_RX_WAIT_CCA			0x0e70
+#define REG_TX_CCK_RFON			0x0e74
+#define REG_TX_CCK_BBON			0x0e78
+#define REG_TX_OFDM_RFON		0x0e7c
+#define REG_TX_OFDM_BBON		0x0e80
+#define REG_TX_TO_RX			0x0e84
+#define REG_TX_TO_TX			0x0e88
+#define REG_RX_CCK			0x0e8c
+
+#define REG_TX_POWER_BEFORE_IQK_A	0x0e94
+#define REG_IQK_RPT_TXA			0x0e98
+#define REG_TX_POWER_AFTER_IQK_A	0x0e9c
+
+#define REG_RX_POWER_BEFORE_IQK_A	0x0ea0
+#define REG_RX_POWER_BEFORE_IQK_A_2	0x0ea4
+#define REG_RX_POWER_AFTER_IQK_A	0x0ea8
+#define REG_IQK_RPT_RXA			0x0ea8
+#define REG_RX_POWER_AFTER_IQK_A_2	0x0eac
+
+#define REG_TX_POWER_BEFORE_IQK_B	0x0eb4
+#define REG_IQK_RPT_TXB			0x0eb8
+#define REG_TX_POWER_AFTER_IQK_B	0x0ebc
+
+#define REG_RX_POWER_BEFORE_IQK_B	0x0ec0
+#define REG_RX_POWER_BEFORE_IQK_B_2	0x0ec4
+#define REG_RX_POWER_AFTER_IQK_B	0x0ec8
+#define REG_IQK_RPT_RXB			0x0ec8
+#define REG_RX_POWER_AFTER_IQK_B_2	0x0ecc
+
+#define REG_RX_OFDM			0x0ed0
+#define REG_RX_WAIT_RIFS		0x0ed4
+#define REG_RX_TO_RX			0x0ed8
+#define REG_STANDBY			0x0edc
+#define REG_SLEEP			0x0ee0
+#define REG_PMPD_ANAEN			0x0eec
+
+#define REG_FW_START_ADDRESS		0x1000
+#define REG_FW_START_ADDRESS_8192F	0x4000
+
+#define REG_SW_GPIO_SHARE_CTRL_0	0x1038
+#define REG_SW_GPIO_SHARE_CTRL_1	0x103c
+#define REG_GPIO_A0			0x1050
+#define REG_GPIO_B0			0x105b
+
+#define REG_USB_INFO			0xfe17
+#define REG_USB_HIMR			0xfe38
+#define  USB_HIMR_TIMEOUT2		BIT(31)
+#define  USB_HIMR_TIMEOUT1		BIT(30)
+#define  USB_HIMR_PSTIMEOUT		BIT(29)
+#define  USB_HIMR_GTINT4		BIT(28)
+#define  USB_HIMR_GTINT3		BIT(27)
+#define  USB_HIMR_TXBCNERR		BIT(26)
+#define  USB_HIMR_TXBCNOK		BIT(25)
+#define  USB_HIMR_TSF_BIT32_TOGGLE	BIT(24)
+#define  USB_HIMR_BCNDMAINT3		BIT(23)
+#define  USB_HIMR_BCNDMAINT2		BIT(22)
+#define  USB_HIMR_BCNDMAINT1		BIT(21)
+#define  USB_HIMR_BCNDMAINT0		BIT(20)
+#define  USB_HIMR_BCNDOK3		BIT(19)
+#define  USB_HIMR_BCNDOK2		BIT(18)
+#define  USB_HIMR_BCNDOK1		BIT(17)
+#define  USB_HIMR_BCNDOK0		BIT(16)
+#define  USB_HIMR_HSISR_IND		BIT(15)
+#define  USB_HIMR_BCNDMAINT_E		BIT(14)
+/* RSVD	BIT(13) */
+#define  USB_HIMR_CTW_END		BIT(12)
+/* RSVD	BIT(11) */
+#define  USB_HIMR_C2HCMD		BIT(10)
+#define  USB_HIMR_CPWM2			BIT(9)
+#define  USB_HIMR_CPWM			BIT(8)
+#define  USB_HIMR_HIGHDOK		BIT(7)	/*  High Queue DMA OK
+						    Interrupt */
+#define  USB_HIMR_MGNTDOK		BIT(6)	/*  Management Queue DMA OK
+						    Interrupt */
+#define  USB_HIMR_BKDOK			BIT(5)	/*  AC_BK DMA OK Interrupt */
+#define  USB_HIMR_BEDOK			BIT(4)	/*  AC_BE DMA OK Interrupt */
+#define  USB_HIMR_VIDOK			BIT(3)	/*  AC_VI DMA OK Interrupt */
+#define  USB_HIMR_VODOK			BIT(2)	/*  AC_VO DMA Interrupt */
+#define  USB_HIMR_RDU			BIT(1)	/*  Receive Descriptor
+						    Unavailable */
+#define  USB_HIMR_ROK			BIT(0)	/*  Receive DMA OK Interrupt */
+
+#define REG_USB_ACCESS_TIMEOUT		0xfe4c
+
+#define REG_USB_SPECIAL_OPTION		0xfe55
+#define  USB_SPEC_USB_AGG_ENABLE	BIT(3)	/* Enable USB aggregation */
+#define  USB_SPEC_INT_BULK_SELECT	BIT(4)	/* Use interrupt endpoint to
+						   deliver interrupt packet.
+						   0: Use int, 1: use bulk */
+#define REG_USB_HRPWM			0xfe58
+#define REG_USB_DMA_AGG_TO		0xfe5b
+#define REG_USB_AGG_TIMEOUT		0xfe5c
+#define REG_USB_AGG_THRESH		0xfe5d
+
+#define REG_NORMAL_SIE_VID		0xfe60	/* 0xfe60 - 0xfe61 */
+#define REG_NORMAL_SIE_PID		0xfe62	/* 0xfe62 - 0xfe63 */
+#define REG_NORMAL_SIE_OPTIONAL		0xfe64
+#define REG_NORMAL_SIE_EP		0xfe65	/* 0xfe65 - 0xfe67 */
+#define REG_NORMAL_SIE_EP_TX		0xfe66
+#define  NORMAL_SIE_EP_TX_HIGH_MASK	0x000f
+#define  NORMAL_SIE_EP_TX_NORMAL_MASK	0x00f0
+#define  NORMAL_SIE_EP_TX_LOW_MASK	0x0f00
+
+#define REG_NORMAL_SIE_PHY		0xfe68	/* 0xfe68 - 0xfe6b */
+#define REG_NORMAL_SIE_OPTIONAL2	0xfe6c
+#define REG_NORMAL_SIE_GPS_EP		0xfe6d	/* RTL8723 only */
+#define REG_NORMAL_SIE_MAC_ADDR		0xfe70	/* 0xfe70 - 0xfe75 */
+#define REG_NORMAL_SIE_STRING		0xfe80	/* 0xfe80 - 0xfedf */
+
+/*
+ * 8710B register addresses between 0x00 and 0xff must have 0x8000
+ * added to them. We take care of that in the rtl8xxxu_read{8,16,32}
+ * and rtl8xxxu_write{8,16,32} functions.
+ */
+#define REG_SYS_FUNC_8710B		0x0004
+#define REG_AFE_CTRL_8710B		0x0050
+#define REG_WL_RF_PSS_8710B		0x005c
+#define REG_EFUSE_INDIRECT_CTRL_8710B	0x006c
+#define  NORMAL_REG_READ_OFFSET		0x83000000
+#define  NORMAL_REG_WRITE_OFFSET	0x84000000
+#define  EFUSE_READ_OFFSET		0x85000000
+#define  EFUSE_WRITE_OFFSET		0x86000000
+#define REG_HIMR0_8710B			0x0080
+#define REG_HISR0_8710B			0x0084
+/*
+ * 8710B uses this instead of REG_MCU_FW_DL, but at least bits
+ * 0-7 have the same meaning.
+ */
+#define REG_8051FW_CTRL_V1_8710B	0x0090
+#define REG_USB_HOST_INDIRECT_DATA_8710B	0x009c
+#define REG_WL_STATUS_8710B		0x00f0
+#define REG_USB_HOST_INDIRECT_ADDR_8710B	0x00f8
+
+/*
+ * 8710B registers which must be accessed through rtl8710b_read_syson_reg
+ * and rtl8710b_write_syson_reg.
+ */
+#define SYSON_REG_BASE_ADDR_8710B	0x40000000
+#define REG_SYS_XTAL_CTRL0_8710B	0x060
+#define REG_SYS_EEPROM_CTRL0_8710B	0x0e0
+#define REG_SYS_SYSTEM_CFG0_8710B	0x1f0
+#define REG_SYS_SYSTEM_CFG1_8710B	0x1f4
+#define REG_SYS_SYSTEM_CFG2_8710B	0x1f8
+
+/* RF6052 registers */
+#define RF6052_REG_AC			0x00
+#define RF6052_REG_IQADJ_G1		0x01
+#define RF6052_REG_IQADJ_G2		0x02
+#define RF6052_REG_BS_PA_APSET_G1_G4	0x03
+#define RF6052_REG_BS_PA_APSET_G5_G8	0x04
+#define RF6052_REG_POW_TRSW		0x05
+#define RF6052_REG_GAIN_RX		0x06
+#define RF6052_REG_GAIN_TX		0x07
+#define RF6052_REG_TXM_IDAC		0x08
+#define RF6052_REG_IPA_G		0x09
+#define RF6052_REG_TXBIAS_G		0x0a
+#define RF6052_REG_TXPA_AG		0x0b
+#define RF6052_REG_IPA_A		0x0c
+#define RF6052_REG_TXBIAS_A		0x0d
+#define RF6052_REG_BS_PA_APSET_G9_G11	0x0e
+#define RF6052_REG_BS_IQGEN		0x0f
+#define RF6052_REG_MODE1		0x10
+#define RF6052_REG_MODE2		0x11
+#define RF6052_REG_RX_AGC_HP		0x12
+#define RF6052_REG_TX_AGC		0x13
+#define RF6052_REG_BIAS			0x14
+#define RF6052_REG_IPA			0x15
+#define RF6052_REG_TXBIAS		0x16
+#define RF6052_REG_POW_ABILITY		0x17
+#define RF6052_REG_MODE_AG		0x18	/* RF channel and BW switch */
+#define  MODE_AG_CHANNEL_MASK		0x3ff
+#define  MODE_AG_CHANNEL_20MHZ		BIT(10)
+#define  MODE_AG_BW_MASK		(BIT(10) | BIT(11))
+#define  MODE_AG_BW_20MHZ_8723B		(BIT(10) | BIT(11))
+#define  MODE_AG_BW_40MHZ_8723B		BIT(10)
+#define  MODE_AG_BW_80MHZ_8723B		0
+
+#define RF6052_REG_TOP			0x19
+#define RF6052_REG_RX_G1		0x1a
+#define RF6052_REG_RX_G2		0x1b
+#define RF6052_REG_RX_BB2		0x1c
+#define RF6052_REG_RX_BB1		0x1d
+#define RF6052_REG_RCK1			0x1e
+#define RF6052_REG_RCK2			0x1f
+#define RF6052_REG_TX_G1		0x20
+#define RF6052_REG_TX_G2		0x21
+#define RF6052_REG_TX_G3		0x22
+#define RF6052_REG_TX_BB1		0x23
+#define RF6052_REG_T_METER		0x24
+#define RF6052_REG_SYN_G1		0x25	/* RF TX Power control */
+#define RF6052_REG_SYN_G2		0x26	/* RF TX Power control */
+#define RF6052_REG_SYN_G3		0x27	/* RF TX Power control */
+#define RF6052_REG_SYN_G4		0x28	/* RF TX Power control */
+#define RF6052_REG_SYN_G5		0x29	/* RF TX Power control */
+#define RF6052_REG_SYN_G6		0x2a	/* RF TX Power control */
+#define RF6052_REG_SYN_G7		0x2b	/* RF TX Power control */
+#define RF6052_REG_SYN_G8		0x2c	/* RF TX Power control */
+
+#define RF6052_REG_RCK_OS		0x30	/* RF TX PA control */
+
+#define RF6052_REG_TXPA_G1		0x31	/* RF TX PA control */
+#define RF6052_REG_TXPA_G2		0x32	/* RF TX PA control */
+#define RF6052_REG_TXPA_G3		0x33	/* RF TX PA control */
+
+/*
+ * NextGen regs: 8723BU
+ */
+#define RF6052_REG_GAIN_P1		0x35
+#define RF6052_REG_T_METER_8723B	0x42
+#define RF6052_REG_UNKNOWN_43		0x43
+#define RF6052_REG_UNKNOWN_55		0x55
+#define RF6052_REG_PAD_TXG		0x56
+#define RF6052_REG_TXMOD		0x58
+#define RF6052_REG_RXG_MIX_SWBW		0x87
+#define RF6052_REG_S0S1			0xb0
+#define RF6052_REG_GAIN_CCA		0xdf
+#define RF6052_REG_UNKNOWN_ED		0xed
+#define RF6052_REG_WE_LUT		0xef
+#define RF6052_REG_GAIN_CTRL		0xf5