diff options
Diffstat (limited to 'drivers/net/wireless/realtek/rtw88/sdio.h')
| -rw-r--r-- | drivers/net/wireless/realtek/rtw88/sdio.h | 178 |
1 files changed, 178 insertions, 0 deletions
diff --git a/drivers/net/wireless/realtek/rtw88/sdio.h b/drivers/net/wireless/realtek/rtw88/sdio.h new file mode 100644 index 0000000000..3c659ed180 --- /dev/null +++ b/drivers/net/wireless/realtek/rtw88/sdio.h @@ -0,0 +1,178 @@ +/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */ +/* Copyright (C) 2021 Martin Blumenstingl <martin.blumenstingl@googlemail.com> + * Copyright (C) 2021 Jernej Skrabec <jernej.skrabec@gmail.com> + */ + +#ifndef __REG_SDIO_H_ +#define __REG_SDIO_H_ + +/* I/O bus domain address mapping */ +#define SDIO_LOCAL_OFFSET 0x10250000 +#define WLAN_IOREG_OFFSET 0x10260000 +#define FIRMWARE_FIFO_OFFSET 0x10270000 +#define TX_HIQ_OFFSET 0x10310000 +#define TX_MIQ_OFFSET 0x10320000 +#define TX_LOQ_OFFSET 0x10330000 +#define TX_EPQ_OFFSET 0x10350000 +#define RX_RX0FF_OFFSET 0x10340000 + +#define RTW_SDIO_BUS_MSK 0xffff0000 +#define SDIO_LOCAL_REG_MSK 0x00000fff +#define WLAN_IOREG_REG_MSK 0x0000ffff + +/* SDIO Tx Control */ +#define REG_SDIO_TX_CTRL (SDIO_LOCAL_OFFSET + 0x0000) + +/*SDIO status timeout*/ +#define REG_SDIO_TIMEOUT (SDIO_LOCAL_OFFSET + 0x0002) + +/* SDIO Host Interrupt Mask */ +#define REG_SDIO_HIMR (SDIO_LOCAL_OFFSET + 0x0014) +#define REG_SDIO_HIMR_RX_REQUEST BIT(0) +#define REG_SDIO_HIMR_AVAL BIT(1) +#define REG_SDIO_HIMR_TXERR BIT(2) +#define REG_SDIO_HIMR_RXERR BIT(3) +#define REG_SDIO_HIMR_TXFOVW BIT(4) +#define REG_SDIO_HIMR_RXFOVW BIT(5) +#define REG_SDIO_HIMR_TXBCNOK BIT(6) +#define REG_SDIO_HIMR_TXBCNERR BIT(7) +#define REG_SDIO_HIMR_BCNERLY_INT BIT(16) +#define REG_SDIO_HIMR_C2HCMD BIT(17) +#define REG_SDIO_HIMR_CPWM1 BIT(18) +#define REG_SDIO_HIMR_CPWM2 BIT(19) +#define REG_SDIO_HIMR_HSISR_IND BIT(20) +#define REG_SDIO_HIMR_GTINT3_IND BIT(21) +#define REG_SDIO_HIMR_GTINT4_IND BIT(22) +#define REG_SDIO_HIMR_PSTIMEOUT BIT(23) +#define REG_SDIO_HIMR_OCPINT BIT(24) +#define REG_SDIO_HIMR_ATIMEND BIT(25) +#define REG_SDIO_HIMR_ATIMEND_E BIT(26) +#define REG_SDIO_HIMR_CTWEND BIT(27) +/* the following two are RTL8188 SDIO Specific */ +#define REG_SDIO_HIMR_MCU_ERR BIT(28) +#define REG_SDIO_HIMR_TSF_BIT32_TOGGLE BIT(29) + +/* SDIO Host Interrupt Service Routine */ +#define REG_SDIO_HISR (SDIO_LOCAL_OFFSET + 0x0018) +#define REG_SDIO_HISR_RX_REQUEST BIT(0) +#define REG_SDIO_HISR_AVAL BIT(1) +#define REG_SDIO_HISR_TXERR BIT(2) +#define REG_SDIO_HISR_RXERR BIT(3) +#define REG_SDIO_HISR_TXFOVW BIT(4) +#define REG_SDIO_HISR_RXFOVW BIT(5) +#define REG_SDIO_HISR_TXBCNOK BIT(6) +#define REG_SDIO_HISR_TXBCNERR BIT(7) +#define REG_SDIO_HISR_BCNERLY_INT BIT(16) +#define REG_SDIO_HISR_C2HCMD BIT(17) +#define REG_SDIO_HISR_CPWM1 BIT(18) +#define REG_SDIO_HISR_CPWM2 BIT(19) +#define REG_SDIO_HISR_HSISR_IND BIT(20) +#define REG_SDIO_HISR_GTINT3_IND BIT(21) +#define REG_SDIO_HISR_GTINT4_IND BIT(22) +#define REG_SDIO_HISR_PSTIMEOUT BIT(23) +#define REG_SDIO_HISR_OCPINT BIT(24) +#define REG_SDIO_HISR_ATIMEND BIT(25) +#define REG_SDIO_HISR_ATIMEND_E BIT(26) +#define REG_SDIO_HISR_CTWEND BIT(27) +/* the following two are RTL8188 SDIO Specific */ +#define REG_SDIO_HISR_MCU_ERR BIT(28) +#define REG_SDIO_HISR_TSF_BIT32_TOGGLE BIT(29) + +/* HCI Current Power Mode */ +#define REG_SDIO_HCPWM (SDIO_LOCAL_OFFSET + 0x0019) +/* RXDMA Request Length */ +#define REG_SDIO_RX0_REQ_LEN (SDIO_LOCAL_OFFSET + 0x001C) +/* OQT Free Page */ +#define REG_SDIO_OQT_FREE_PG (SDIO_LOCAL_OFFSET + 0x001E) +/* Free Tx Buffer Page */ +#define REG_SDIO_FREE_TXPG (SDIO_LOCAL_OFFSET + 0x0020) +/* HCI Current Power Mode 1 */ +#define REG_SDIO_HCPWM1 (SDIO_LOCAL_OFFSET + 0x0024) +/* HCI Current Power Mode 2 */ +#define REG_SDIO_HCPWM2 (SDIO_LOCAL_OFFSET + 0x0026) +/* Free Tx Page Sequence */ +#define REG_SDIO_FREE_TXPG_SEQ (SDIO_LOCAL_OFFSET + 0x0028) +/* HTSF Information */ +#define REG_SDIO_HTSFR_INFO (SDIO_LOCAL_OFFSET + 0x0030) +#define REG_SDIO_HCPWM1_V2 (SDIO_LOCAL_OFFSET + 0x0038) +/* H2C */ +#define REG_SDIO_H2C (SDIO_LOCAL_OFFSET + 0x0060) +/* HCI Request Power Mode 1 */ +#define REG_SDIO_HRPWM1 (SDIO_LOCAL_OFFSET + 0x0080) +/* HCI Request Power Mode 2 */ +#define REG_SDIO_HRPWM2 (SDIO_LOCAL_OFFSET + 0x0082) +/* HCI Power Save Clock */ +#define REG_SDIO_HPS_CLKR (SDIO_LOCAL_OFFSET + 0x0084) +/* SDIO HCI Suspend Control */ +#define REG_SDIO_HSUS_CTRL (SDIO_LOCAL_OFFSET + 0x0086) +#define BIT_HCI_SUS_REQ BIT(0) +#define BIT_HCI_RESUME_RDY BIT(1) +/* SDIO Host Extension Interrupt Mask Always */ +#define REG_SDIO_HIMR_ON (SDIO_LOCAL_OFFSET + 0x0090) +/* SDIO Host Extension Interrupt Status Always */ +#define REG_SDIO_HISR_ON (SDIO_LOCAL_OFFSET + 0x0091) + +#define REG_SDIO_INDIRECT_REG_CFG (SDIO_LOCAL_OFFSET + 0x0040) +#define BIT_SDIO_INDIRECT_REG_CFG_WORD BIT(16) +#define BIT_SDIO_INDIRECT_REG_CFG_DWORD BIT(17) +#define BIT_SDIO_INDIRECT_REG_CFG_WRITE BIT(18) +#define BIT_SDIO_INDIRECT_REG_CFG_READ BIT(19) +#define BIT_SDIO_INDIRECT_REG_CFG_UNK20 BIT(20) +#define REG_SDIO_INDIRECT_REG_DATA (SDIO_LOCAL_OFFSET + 0x0044) + +/* Sdio Address for SDIO Local Reg, TRX FIFO, MAC Reg */ +#define REG_SDIO_CMD_ADDR_MSK GENMASK(16, 13) +#define REG_SDIO_CMD_ADDR_SDIO_REG 0 +#define REG_SDIO_CMD_ADDR_MAC_REG 8 +#define REG_SDIO_CMD_ADDR_TXFF_HIGH 4 +#define REG_SDIO_CMD_ADDR_TXFF_LOW 6 +#define REG_SDIO_CMD_ADDR_TXFF_NORMAL 5 +#define REG_SDIO_CMD_ADDR_TXFF_EXTRA 7 +#define REG_SDIO_CMD_ADDR_RXFF 7 + +#define RTW_SDIO_BLOCK_SIZE 512 +#define RTW_SDIO_ADDR_RX_RX0FF_GEN(_id) (0x0e000 | ((_id) & 0x3)) + +#define RTW_SDIO_DATA_PTR_ALIGN 8 + +struct sdio_func; +struct sdio_device_id; + +struct rtw_sdio_tx_data { + u8 sn; +}; + +struct rtw_sdio_work_data { + struct work_struct work; + struct rtw_dev *rtwdev; +}; + +struct rtw_sdio { + struct sdio_func *sdio_func; + + u32 irq_mask; + u8 rx_addr; + bool sdio3_bus_mode; + + void *irq_thread; + + struct workqueue_struct *txwq; + struct rtw_sdio_work_data *tx_handler_data; + struct sk_buff_head tx_queue[RTK_MAX_TX_QUEUE_NUM]; +}; + +extern const struct dev_pm_ops rtw_sdio_pm_ops; + +int rtw_sdio_probe(struct sdio_func *sdio_func, + const struct sdio_device_id *id); +void rtw_sdio_remove(struct sdio_func *sdio_func); +void rtw_sdio_shutdown(struct device *dev); + +static inline bool rtw_sdio_is_sdio30_supported(struct rtw_dev *rtwdev) +{ + struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv; + + return rtwsdio->sdio3_bus_mode; +} + +#endif |