summaryrefslogtreecommitdiffstats
path: root/drivers/ntb/hw/idt/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ntb/hw/idt/Kconfig')
-rw-r--r--drivers/ntb/hw/idt/Kconfig31
1 files changed, 31 insertions, 0 deletions
diff --git a/drivers/ntb/hw/idt/Kconfig b/drivers/ntb/hw/idt/Kconfig
new file mode 100644
index 000000000..c79b54c17
--- /dev/null
+++ b/drivers/ntb/hw/idt/Kconfig
@@ -0,0 +1,31 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config NTB_IDT
+ tristate "IDT PCIe-switch Non-Transparent Bridge support"
+ depends on PCI
+ select HWMON
+ help
+ This driver supports NTB of capable IDT PCIe-switches.
+
+ Some of the pre-initializations must be made before IDT PCIe-switch
+ exposes its NT-functions correctly. It should be done by either proper
+ initialization of EEPROM connected to master SMbus of the switch or
+ by BIOS using slave-SMBus interface changing corresponding registers
+ value. Evidently it must be done before PCI bus enumeration is
+ finished in Linux kernel.
+
+ First of all partitions must be activated and properly assigned to all
+ the ports with NT-functions intended to be activated (see SWPARTxCTL
+ and SWPORTxCTL registers). Then all NT-function BARs must be enabled
+ with chosen valid aperture. For memory windows related BARs the
+ aperture settings shall determine the maximum size of memory windows
+ accepted by a BAR. Note that BAR0 must map PCI configuration space
+ registers.
+
+ It's worth to note, that since a part of this driver relies on the
+ BAR settings of peer NT-functions, the BAR setups can't be done over
+ kernel PCI fixups. That's why the alternative pre-initialization
+ techniques like BIOS using SMBus interface or EEPROM should be
+ utilized.
+
+ If unsure, say N.
+