diff options
Diffstat (limited to 'drivers/nvmem/sc27xx-efuse.c')
| -rw-r--r-- | drivers/nvmem/sc27xx-efuse.c | 277 |
1 files changed, 277 insertions, 0 deletions
diff --git a/drivers/nvmem/sc27xx-efuse.c b/drivers/nvmem/sc27xx-efuse.c new file mode 100644 index 0000000000..2210da40df --- /dev/null +++ b/drivers/nvmem/sc27xx-efuse.c @@ -0,0 +1,277 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (C) 2018 Spreadtrum Communications Inc. + +#include <linux/hwspinlock.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/nvmem-provider.h> + +/* PMIC global registers definition */ +#define SC27XX_MODULE_EN 0xc08 +#define SC2730_MODULE_EN 0x1808 +#define SC27XX_EFUSE_EN BIT(6) + +/* Efuse controller registers definition */ +#define SC27XX_EFUSE_GLB_CTRL 0x0 +#define SC27XX_EFUSE_DATA_RD 0x4 +#define SC27XX_EFUSE_DATA_WR 0x8 +#define SC27XX_EFUSE_BLOCK_INDEX 0xc +#define SC27XX_EFUSE_MODE_CTRL 0x10 +#define SC27XX_EFUSE_STATUS 0x14 +#define SC27XX_EFUSE_WR_TIMING_CTRL 0x20 +#define SC27XX_EFUSE_RD_TIMING_CTRL 0x24 +#define SC27XX_EFUSE_EFUSE_DEB_CTRL 0x28 + +/* Mask definition for SC27XX_EFUSE_BLOCK_INDEX register */ +#define SC27XX_EFUSE_BLOCK_MASK GENMASK(4, 0) + +/* Bits definitions for SC27XX_EFUSE_MODE_CTRL register */ +#define SC27XX_EFUSE_PG_START BIT(0) +#define SC27XX_EFUSE_RD_START BIT(1) +#define SC27XX_EFUSE_CLR_RDDONE BIT(2) + +/* Bits definitions for SC27XX_EFUSE_STATUS register */ +#define SC27XX_EFUSE_PGM_BUSY BIT(0) +#define SC27XX_EFUSE_READ_BUSY BIT(1) +#define SC27XX_EFUSE_STANDBY BIT(2) +#define SC27XX_EFUSE_GLOBAL_PROT BIT(3) +#define SC27XX_EFUSE_RD_DONE BIT(4) + +/* Block number and block width (bytes) definitions */ +#define SC27XX_EFUSE_BLOCK_MAX 32 +#define SC27XX_EFUSE_BLOCK_WIDTH 2 + +/* Timeout (ms) for the trylock of hardware spinlocks */ +#define SC27XX_EFUSE_HWLOCK_TIMEOUT 5000 + +/* Timeout (us) of polling the status */ +#define SC27XX_EFUSE_POLL_TIMEOUT 3000000 +#define SC27XX_EFUSE_POLL_DELAY_US 10000 + +/* + * Since different PMICs of SC27xx series can have different + * address , we should save address in the device data structure. + */ +struct sc27xx_efuse_variant_data { + u32 module_en; +}; + +struct sc27xx_efuse { + struct device *dev; + struct regmap *regmap; + struct hwspinlock *hwlock; + struct mutex mutex; + u32 base; + const struct sc27xx_efuse_variant_data *var_data; +}; + +static const struct sc27xx_efuse_variant_data sc2731_edata = { + .module_en = SC27XX_MODULE_EN, +}; + +static const struct sc27xx_efuse_variant_data sc2730_edata = { + .module_en = SC2730_MODULE_EN, +}; + +/* + * On Spreadtrum platform, we have multi-subsystems will access the unique + * efuse controller, so we need one hardware spinlock to synchronize between + * the multiple subsystems. + */ +static int sc27xx_efuse_lock(struct sc27xx_efuse *efuse) +{ + int ret; + + mutex_lock(&efuse->mutex); + + ret = hwspin_lock_timeout_raw(efuse->hwlock, + SC27XX_EFUSE_HWLOCK_TIMEOUT); + if (ret) { + dev_err(efuse->dev, "timeout to get the hwspinlock\n"); + mutex_unlock(&efuse->mutex); + return ret; + } + + return 0; +} + +static void sc27xx_efuse_unlock(struct sc27xx_efuse *efuse) +{ + hwspin_unlock_raw(efuse->hwlock); + mutex_unlock(&efuse->mutex); +} + +static int sc27xx_efuse_poll_status(struct sc27xx_efuse *efuse, u32 bits) +{ + int ret; + u32 val; + + ret = regmap_read_poll_timeout(efuse->regmap, + efuse->base + SC27XX_EFUSE_STATUS, + val, (val & bits), + SC27XX_EFUSE_POLL_DELAY_US, + SC27XX_EFUSE_POLL_TIMEOUT); + if (ret) { + dev_err(efuse->dev, "timeout to update the efuse status\n"); + return ret; + } + + return 0; +} + +static int sc27xx_efuse_read(void *context, u32 offset, void *val, size_t bytes) +{ + struct sc27xx_efuse *efuse = context; + u32 buf, blk_index = offset / SC27XX_EFUSE_BLOCK_WIDTH; + u32 blk_offset = (offset % SC27XX_EFUSE_BLOCK_WIDTH) * BITS_PER_BYTE; + int ret; + + if (blk_index > SC27XX_EFUSE_BLOCK_MAX || + bytes > SC27XX_EFUSE_BLOCK_WIDTH) + return -EINVAL; + + ret = sc27xx_efuse_lock(efuse); + if (ret) + return ret; + + /* Enable the efuse controller. */ + ret = regmap_update_bits(efuse->regmap, efuse->var_data->module_en, + SC27XX_EFUSE_EN, SC27XX_EFUSE_EN); + if (ret) + goto unlock_efuse; + + /* + * Before reading, we should ensure the efuse controller is in + * standby state. + */ + ret = sc27xx_efuse_poll_status(efuse, SC27XX_EFUSE_STANDBY); + if (ret) + goto disable_efuse; + + /* Set the block address to be read. */ + ret = regmap_write(efuse->regmap, + efuse->base + SC27XX_EFUSE_BLOCK_INDEX, + blk_index & SC27XX_EFUSE_BLOCK_MASK); + if (ret) + goto disable_efuse; + + /* Start reading process from efuse memory. */ + ret = regmap_update_bits(efuse->regmap, + efuse->base + SC27XX_EFUSE_MODE_CTRL, + SC27XX_EFUSE_RD_START, + SC27XX_EFUSE_RD_START); + if (ret) + goto disable_efuse; + + /* + * Polling the read done status to make sure the reading process + * is completed, that means the data can be read out now. + */ + ret = sc27xx_efuse_poll_status(efuse, SC27XX_EFUSE_RD_DONE); + if (ret) + goto disable_efuse; + + /* Read data from efuse memory. */ + ret = regmap_read(efuse->regmap, efuse->base + SC27XX_EFUSE_DATA_RD, + &buf); + if (ret) + goto disable_efuse; + + /* Clear the read done flag. */ + ret = regmap_update_bits(efuse->regmap, + efuse->base + SC27XX_EFUSE_MODE_CTRL, + SC27XX_EFUSE_CLR_RDDONE, + SC27XX_EFUSE_CLR_RDDONE); + +disable_efuse: + /* Disable the efuse controller after reading. */ + regmap_update_bits(efuse->regmap, efuse->var_data->module_en, SC27XX_EFUSE_EN, 0); +unlock_efuse: + sc27xx_efuse_unlock(efuse); + + if (!ret) { + buf >>= blk_offset; + memcpy(val, &buf, bytes); + } + + return ret; +} + +static int sc27xx_efuse_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct nvmem_config econfig = { }; + struct nvmem_device *nvmem; + struct sc27xx_efuse *efuse; + int ret; + + efuse = devm_kzalloc(&pdev->dev, sizeof(*efuse), GFP_KERNEL); + if (!efuse) + return -ENOMEM; + + efuse->regmap = dev_get_regmap(pdev->dev.parent, NULL); + if (!efuse->regmap) { + dev_err(&pdev->dev, "failed to get efuse regmap\n"); + return -ENODEV; + } + + ret = of_property_read_u32(np, "reg", &efuse->base); + if (ret) { + dev_err(&pdev->dev, "failed to get efuse base address\n"); + return ret; + } + + ret = of_hwspin_lock_get_id(np, 0); + if (ret < 0) { + dev_err(&pdev->dev, "failed to get hwspinlock id\n"); + return ret; + } + + efuse->hwlock = devm_hwspin_lock_request_specific(&pdev->dev, ret); + if (!efuse->hwlock) { + dev_err(&pdev->dev, "failed to request hwspinlock\n"); + return -ENXIO; + } + + mutex_init(&efuse->mutex); + efuse->dev = &pdev->dev; + efuse->var_data = of_device_get_match_data(&pdev->dev); + + econfig.stride = 1; + econfig.word_size = 1; + econfig.read_only = true; + econfig.name = "sc27xx-efuse"; + econfig.size = SC27XX_EFUSE_BLOCK_MAX * SC27XX_EFUSE_BLOCK_WIDTH; + econfig.reg_read = sc27xx_efuse_read; + econfig.priv = efuse; + econfig.dev = &pdev->dev; + nvmem = devm_nvmem_register(&pdev->dev, &econfig); + if (IS_ERR(nvmem)) { + dev_err(&pdev->dev, "failed to register nvmem config\n"); + return PTR_ERR(nvmem); + } + + return 0; +} + +static const struct of_device_id sc27xx_efuse_of_match[] = { + { .compatible = "sprd,sc2731-efuse", .data = &sc2731_edata}, + { .compatible = "sprd,sc2730-efuse", .data = &sc2730_edata}, + { } +}; + +static struct platform_driver sc27xx_efuse_driver = { + .probe = sc27xx_efuse_probe, + .driver = { + .name = "sc27xx-efuse", + .of_match_table = sc27xx_efuse_of_match, + }, +}; + +module_platform_driver(sc27xx_efuse_driver); + +MODULE_AUTHOR("Freeman Liu <freeman.liu@spreadtrum.com>"); +MODULE_DESCRIPTION("Spreadtrum SC27xx efuse driver"); +MODULE_LICENSE("GPL v2"); |