diff options
Diffstat (limited to 'drivers/parport/Kconfig')
| -rw-r--r-- | drivers/parport/Kconfig | 156 |
1 files changed, 156 insertions, 0 deletions
diff --git a/drivers/parport/Kconfig b/drivers/parport/Kconfig new file mode 100644 index 0000000000..631c193fe4 --- /dev/null +++ b/drivers/parport/Kconfig @@ -0,0 +1,156 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# For a description of the syntax of this configuration file, +# see Documentation/kbuild/kconfig-language.rst. +# +# Parport configuration. +# + +config ARCH_MIGHT_HAVE_PC_PARPORT + bool + help + Select this config option from the architecture Kconfig if + the architecture might have PC parallel port hardware. + +menuconfig PARPORT + tristate "Parallel port support" + depends on HAS_IOMEM + help + If you want to use devices connected to your machine's parallel port + (the connector at the computer with 25 holes), e.g. printer, ZIP + drive, PLIP link (Parallel Line Internet Protocol is mainly used to + create a mini network by connecting the parallel ports of two local + machines) etc., then you need to say Y here; please read + <file:Documentation/admin-guide/parport.rst> and + <file:drivers/parport/BUGS-parport>. + + For extensive information about drivers for many devices attaching + to the parallel port see <http://www.torque.net/linux-pp.html> on + the WWW. + + It is possible to share a single parallel port among several devices + and it is safe to compile all the corresponding drivers into the + kernel. To compile parallel port support as a module, choose M here: + the module will be called parport. + If you have more than one parallel port and want to specify which + port and IRQ to be used by this driver at module load time, take a + look at <file:Documentation/admin-guide/parport.rst>. + + If unsure, say Y. + +if PARPORT + +config PARPORT_PC + tristate "PC-style hardware" + depends on ARCH_MIGHT_HAVE_PC_PARPORT || PCI + depends on HAS_IOPORT + help + You should say Y here if you have a PC-style parallel port. All + IBM PC compatible computers and some Alphas have PC-style + parallel ports. PA-RISC owners should only say Y here if they + have a SuperIO parallel port. + + To compile this driver as a module, choose M here: the + module will be called parport_pc. + + If unsure, say Y. + +config PARPORT_SERIAL + tristate "Multi-IO cards (parallel and serial)" + depends on SERIAL_8250_PCI && PARPORT_PC && PCI + help + This adds support for multi-IO PCI cards that have parallel and + serial ports. You should say Y or M here. If you say M, the module + will be called parport_serial. + +config PARPORT_PC_FIFO + bool "Use FIFO/DMA if available" + depends on PARPORT_PC + help + Many parallel port chipsets provide hardware that can speed up + printing. Say Y here if you want to take advantage of that. + + As well as actually having a FIFO, or DMA capability, the kernel + will need to know which IRQ the parallel port has. By default, + parallel port interrupts will not be used, and so neither will the + FIFO. See <file:Documentation/admin-guide/parport.rst> to find out how to + specify which IRQ/DMA to use. + +config PARPORT_PC_SUPERIO + bool "SuperIO chipset support" + depends on ARCH_MIGHT_HAVE_PC_PARPORT && PARPORT_PC && !PARISC + help + Saying Y here enables some probes for Super-IO chipsets in order to + find out things like base addresses, IRQ lines and DMA channels. It + is safe to say N. + +config PARPORT_PC_PCMCIA + tristate "Support for PCMCIA management for PC-style ports" + depends on PCMCIA && PARPORT_PC + help + Say Y here if you need PCMCIA support for your PC-style parallel + ports. If unsure, say N. + +config PARPORT_IP32 + tristate "SGI IP32 builtin port" + depends on SGI_IP32 + select PARPORT_NOT_PC + help + Say Y here if you need support for the parallel port on + SGI O2 machines. This code is also available as a module (say M), + called parport_ip32. If in doubt, saying N is the safe plan. + +config PARPORT_AMIGA + tristate "Amiga builtin port" + depends on AMIGA + select PARPORT_NOT_PC + help + Say Y here if you need support for the parallel port hardware on + Amiga machines. This code is also available as a module (say M), + called parport_amiga. If in doubt, saying N is the safe plan. + +config PARPORT_MFC3 + tristate "Multiface III parallel port" + depends on ZORRO + select PARPORT_NOT_PC + help + Say Y here if you need parallel port support for the MFC3 card. + This code is also available as a module (say M), called + parport_mfc3. If in doubt, saying N is the safe plan. + +config PARPORT_ATARI + tristate "Atari hardware" + depends on ATARI + select PARPORT_NOT_PC + help + Say Y here if you need support for the parallel port hardware on + Atari machines. This code is also available as a module (say M), + called parport_atari. If in doubt, saying N is the safe plan. + +config PARPORT_GSC + tristate + default GSC + select PARPORT_NOT_PC + +config PARPORT_SUNBPP + tristate "Sparc hardware" + depends on SBUS + select PARPORT_NOT_PC + help + This driver provides support for the bidirectional parallel port + found on many Sun machines. Note that many of the newer Ultras + actually have pc style hardware instead. + +config PARPORT_1284 + bool "IEEE 1284 transfer modes" + help + If you have a printer that supports status readback or device ID, or + want to use a device that uses enhanced parallel port transfer modes + such as EPP and ECP, say Y here to enable advanced IEEE 1284 + transfer modes. Also say Y if you want device ID information to + appear in /proc/sys/dev/parport/*/autoprobe*. It is safe to say N. + +config PARPORT_NOT_PC + bool + +endif # PARPORT |