diff options
Diffstat (limited to 'drivers/pci/controller/pcie-iproc.c')
| -rw-r--r-- | drivers/pci/controller/pcie-iproc.c | 1598 |
1 files changed, 1598 insertions, 0 deletions
diff --git a/drivers/pci/controller/pcie-iproc.c b/drivers/pci/controller/pcie-iproc.c new file mode 100644 index 000000000..bd1c98b68 --- /dev/null +++ b/drivers/pci/controller/pcie-iproc.c @@ -0,0 +1,1598 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2014 Hauke Mehrtens <hauke@hauke-m.de> + * Copyright (C) 2015 Broadcom Corporation + */ + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/pci-ecam.h> +#include <linux/msi.h> +#include <linux/clk.h> +#include <linux/module.h> +#include <linux/mbus.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/irqchip/arm-gic-v3.h> +#include <linux/platform_device.h> +#include <linux/of_address.h> +#include <linux/of_pci.h> +#include <linux/of_platform.h> +#include <linux/phy/phy.h> + +#include "pcie-iproc.h" + +#define EP_PERST_SOURCE_SELECT_SHIFT 2 +#define EP_PERST_SOURCE_SELECT BIT(EP_PERST_SOURCE_SELECT_SHIFT) +#define EP_MODE_SURVIVE_PERST_SHIFT 1 +#define EP_MODE_SURVIVE_PERST BIT(EP_MODE_SURVIVE_PERST_SHIFT) +#define RC_PCIE_RST_OUTPUT_SHIFT 0 +#define RC_PCIE_RST_OUTPUT BIT(RC_PCIE_RST_OUTPUT_SHIFT) +#define PAXC_RESET_MASK 0x7f + +#define GIC_V3_CFG_SHIFT 0 +#define GIC_V3_CFG BIT(GIC_V3_CFG_SHIFT) + +#define MSI_ENABLE_CFG_SHIFT 0 +#define MSI_ENABLE_CFG BIT(MSI_ENABLE_CFG_SHIFT) + +#define CFG_IND_ADDR_MASK 0x00001ffc + +#define CFG_ADDR_REG_NUM_MASK 0x00000ffc +#define CFG_ADDR_CFG_TYPE_1 1 + +#define SYS_RC_INTX_MASK 0xf + +#define PCIE_PHYLINKUP_SHIFT 3 +#define PCIE_PHYLINKUP BIT(PCIE_PHYLINKUP_SHIFT) +#define PCIE_DL_ACTIVE_SHIFT 2 +#define PCIE_DL_ACTIVE BIT(PCIE_DL_ACTIVE_SHIFT) + +#define APB_ERR_EN_SHIFT 0 +#define APB_ERR_EN BIT(APB_ERR_EN_SHIFT) + +#define CFG_RD_SUCCESS 0 +#define CFG_RD_UR 1 +#define CFG_RD_CRS 2 +#define CFG_RD_CA 3 +#define CFG_RETRY_STATUS 0xffff0001 +#define CFG_RETRY_STATUS_TIMEOUT_US 500000 /* 500 milliseconds */ + +/* derive the enum index of the outbound/inbound mapping registers */ +#define MAP_REG(base_reg, index) ((base_reg) + (index) * 2) + +/* + * Maximum number of outbound mapping window sizes that can be supported by any + * OARR/OMAP mapping pair + */ +#define MAX_NUM_OB_WINDOW_SIZES 4 + +#define OARR_VALID_SHIFT 0 +#define OARR_VALID BIT(OARR_VALID_SHIFT) +#define OARR_SIZE_CFG_SHIFT 1 + +/* + * Maximum number of inbound mapping region sizes that can be supported by an + * IARR + */ +#define MAX_NUM_IB_REGION_SIZES 9 + +#define IMAP_VALID_SHIFT 0 +#define IMAP_VALID BIT(IMAP_VALID_SHIFT) + +#define IPROC_PCI_PM_CAP 0x48 +#define IPROC_PCI_PM_CAP_MASK 0xffff +#define IPROC_PCI_EXP_CAP 0xac + +#define IPROC_PCIE_REG_INVALID 0xffff + +/** + * struct iproc_pcie_ob_map - iProc PCIe outbound mapping controller-specific + * parameters + * @window_sizes: list of supported outbound mapping window sizes in MB + * @nr_sizes: number of supported outbound mapping window sizes + */ +struct iproc_pcie_ob_map { + resource_size_t window_sizes[MAX_NUM_OB_WINDOW_SIZES]; + unsigned int nr_sizes; +}; + +static const struct iproc_pcie_ob_map paxb_ob_map[] = { + { + /* OARR0/OMAP0 */ + .window_sizes = { 128, 256 }, + .nr_sizes = 2, + }, + { + /* OARR1/OMAP1 */ + .window_sizes = { 128, 256 }, + .nr_sizes = 2, + }, +}; + +static const struct iproc_pcie_ob_map paxb_v2_ob_map[] = { + { + /* OARR0/OMAP0 */ + .window_sizes = { 128, 256 }, + .nr_sizes = 2, + }, + { + /* OARR1/OMAP1 */ + .window_sizes = { 128, 256 }, + .nr_sizes = 2, + }, + { + /* OARR2/OMAP2 */ + .window_sizes = { 128, 256, 512, 1024 }, + .nr_sizes = 4, + }, + { + /* OARR3/OMAP3 */ + .window_sizes = { 128, 256, 512, 1024 }, + .nr_sizes = 4, + }, +}; + +/** + * enum iproc_pcie_ib_map_type - iProc PCIe inbound mapping type + * @IPROC_PCIE_IB_MAP_MEM: DDR memory + * @IPROC_PCIE_IB_MAP_IO: device I/O memory + * @IPROC_PCIE_IB_MAP_INVALID: invalid or unused + */ +enum iproc_pcie_ib_map_type { + IPROC_PCIE_IB_MAP_MEM = 0, + IPROC_PCIE_IB_MAP_IO, + IPROC_PCIE_IB_MAP_INVALID +}; + +/** + * struct iproc_pcie_ib_map - iProc PCIe inbound mapping controller-specific + * parameters + * @type: inbound mapping region type + * @size_unit: inbound mapping region size unit, could be SZ_1K, SZ_1M, or + * SZ_1G + * @region_sizes: list of supported inbound mapping region sizes in KB, MB, or + * GB, depending on the size unit + * @nr_sizes: number of supported inbound mapping region sizes + * @nr_windows: number of supported inbound mapping windows for the region + * @imap_addr_offset: register offset between the upper and lower 32-bit + * IMAP address registers + * @imap_window_offset: register offset between each IMAP window + */ +struct iproc_pcie_ib_map { + enum iproc_pcie_ib_map_type type; + unsigned int size_unit; + resource_size_t region_sizes[MAX_NUM_IB_REGION_SIZES]; + unsigned int nr_sizes; + unsigned int nr_windows; + u16 imap_addr_offset; + u16 imap_window_offset; +}; + +static const struct iproc_pcie_ib_map paxb_v2_ib_map[] = { + { + /* IARR0/IMAP0 */ + .type = IPROC_PCIE_IB_MAP_IO, + .size_unit = SZ_1K, + .region_sizes = { 32 }, + .nr_sizes = 1, + .nr_windows = 8, + .imap_addr_offset = 0x40, + .imap_window_offset = 0x4, + }, + { + /* IARR1/IMAP1 */ + .type = IPROC_PCIE_IB_MAP_MEM, + .size_unit = SZ_1M, + .region_sizes = { 8 }, + .nr_sizes = 1, + .nr_windows = 8, + .imap_addr_offset = 0x4, + .imap_window_offset = 0x8, + + }, + { + /* IARR2/IMAP2 */ + .type = IPROC_PCIE_IB_MAP_MEM, + .size_unit = SZ_1M, + .region_sizes = { 64, 128, 256, 512, 1024, 2048, 4096, 8192, + 16384 }, + .nr_sizes = 9, + .nr_windows = 1, + .imap_addr_offset = 0x4, + .imap_window_offset = 0x8, + }, + { + /* IARR3/IMAP3 */ + .type = IPROC_PCIE_IB_MAP_MEM, + .size_unit = SZ_1G, + .region_sizes = { 1, 2, 4, 8, 16, 32 }, + .nr_sizes = 6, + .nr_windows = 8, + .imap_addr_offset = 0x4, + .imap_window_offset = 0x8, + }, + { + /* IARR4/IMAP4 */ + .type = IPROC_PCIE_IB_MAP_MEM, + .size_unit = SZ_1G, + .region_sizes = { 32, 64, 128, 256, 512 }, + .nr_sizes = 5, + .nr_windows = 8, + .imap_addr_offset = 0x4, + .imap_window_offset = 0x8, + }, +}; + +/* + * iProc PCIe host registers + */ +enum iproc_pcie_reg { + /* clock/reset signal control */ + IPROC_PCIE_CLK_CTRL = 0, + + /* + * To allow MSI to be steered to an external MSI controller (e.g., ARM + * GICv3 ITS) + */ + IPROC_PCIE_MSI_GIC_MODE, + + /* + * IPROC_PCIE_MSI_BASE_ADDR and IPROC_PCIE_MSI_WINDOW_SIZE define the + * window where the MSI posted writes are written, for the writes to be + * interpreted as MSI writes. + */ + IPROC_PCIE_MSI_BASE_ADDR, + IPROC_PCIE_MSI_WINDOW_SIZE, + + /* + * To hold the address of the register where the MSI writes are + * programmed. When ARM GICv3 ITS is used, this should be programmed + * with the address of the GITS_TRANSLATER register. + */ + IPROC_PCIE_MSI_ADDR_LO, + IPROC_PCIE_MSI_ADDR_HI, + + /* enable MSI */ + IPROC_PCIE_MSI_EN_CFG, + + /* allow access to root complex configuration space */ + IPROC_PCIE_CFG_IND_ADDR, + IPROC_PCIE_CFG_IND_DATA, + + /* allow access to device configuration space */ + IPROC_PCIE_CFG_ADDR, + IPROC_PCIE_CFG_DATA, + + /* enable INTx */ + IPROC_PCIE_INTX_EN, + + /* outbound address mapping */ + IPROC_PCIE_OARR0, + IPROC_PCIE_OMAP0, + IPROC_PCIE_OARR1, + IPROC_PCIE_OMAP1, + IPROC_PCIE_OARR2, + IPROC_PCIE_OMAP2, + IPROC_PCIE_OARR3, + IPROC_PCIE_OMAP3, + + /* inbound address mapping */ + IPROC_PCIE_IARR0, + IPROC_PCIE_IMAP0, + IPROC_PCIE_IARR1, + IPROC_PCIE_IMAP1, + IPROC_PCIE_IARR2, + IPROC_PCIE_IMAP2, + IPROC_PCIE_IARR3, + IPROC_PCIE_IMAP3, + IPROC_PCIE_IARR4, + IPROC_PCIE_IMAP4, + + /* config read status */ + IPROC_PCIE_CFG_RD_STATUS, + + /* link status */ + IPROC_PCIE_LINK_STATUS, + + /* enable APB error for unsupported requests */ + IPROC_PCIE_APB_ERR_EN, + + /* total number of core registers */ + IPROC_PCIE_MAX_NUM_REG, +}; + +/* iProc PCIe PAXB BCMA registers */ +static const u16 iproc_pcie_reg_paxb_bcma[IPROC_PCIE_MAX_NUM_REG] = { + [IPROC_PCIE_CLK_CTRL] = 0x000, + [IPROC_PCIE_CFG_IND_ADDR] = 0x120, + [IPROC_PCIE_CFG_IND_DATA] = 0x124, + [IPROC_PCIE_CFG_ADDR] = 0x1f8, + [IPROC_PCIE_CFG_DATA] = 0x1fc, + [IPROC_PCIE_INTX_EN] = 0x330, + [IPROC_PCIE_LINK_STATUS] = 0xf0c, +}; + +/* iProc PCIe PAXB registers */ +static const u16 iproc_pcie_reg_paxb[IPROC_PCIE_MAX_NUM_REG] = { + [IPROC_PCIE_CLK_CTRL] = 0x000, + [IPROC_PCIE_CFG_IND_ADDR] = 0x120, + [IPROC_PCIE_CFG_IND_DATA] = 0x124, + [IPROC_PCIE_CFG_ADDR] = 0x1f8, + [IPROC_PCIE_CFG_DATA] = 0x1fc, + [IPROC_PCIE_INTX_EN] = 0x330, + [IPROC_PCIE_OARR0] = 0xd20, + [IPROC_PCIE_OMAP0] = 0xd40, + [IPROC_PCIE_OARR1] = 0xd28, + [IPROC_PCIE_OMAP1] = 0xd48, + [IPROC_PCIE_LINK_STATUS] = 0xf0c, + [IPROC_PCIE_APB_ERR_EN] = 0xf40, +}; + +/* iProc PCIe PAXB v2 registers */ +static const u16 iproc_pcie_reg_paxb_v2[IPROC_PCIE_MAX_NUM_REG] = { + [IPROC_PCIE_CLK_CTRL] = 0x000, + [IPROC_PCIE_CFG_IND_ADDR] = 0x120, + [IPROC_PCIE_CFG_IND_DATA] = 0x124, + [IPROC_PCIE_CFG_ADDR] = 0x1f8, + [IPROC_PCIE_CFG_DATA] = 0x1fc, + [IPROC_PCIE_INTX_EN] = 0x330, + [IPROC_PCIE_OARR0] = 0xd20, + [IPROC_PCIE_OMAP0] = 0xd40, + [IPROC_PCIE_OARR1] = 0xd28, + [IPROC_PCIE_OMAP1] = 0xd48, + [IPROC_PCIE_OARR2] = 0xd60, + [IPROC_PCIE_OMAP2] = 0xd68, + [IPROC_PCIE_OARR3] = 0xdf0, + [IPROC_PCIE_OMAP3] = 0xdf8, + [IPROC_PCIE_IARR0] = 0xd00, + [IPROC_PCIE_IMAP0] = 0xc00, + [IPROC_PCIE_IARR1] = 0xd08, + [IPROC_PCIE_IMAP1] = 0xd70, + [IPROC_PCIE_IARR2] = 0xd10, + [IPROC_PCIE_IMAP2] = 0xcc0, + [IPROC_PCIE_IARR3] = 0xe00, + [IPROC_PCIE_IMAP3] = 0xe08, + [IPROC_PCIE_IARR4] = 0xe68, + [IPROC_PCIE_IMAP4] = 0xe70, + [IPROC_PCIE_CFG_RD_STATUS] = 0xee0, + [IPROC_PCIE_LINK_STATUS] = 0xf0c, + [IPROC_PCIE_APB_ERR_EN] = 0xf40, +}; + +/* iProc PCIe PAXC v1 registers */ +static const u16 iproc_pcie_reg_paxc[IPROC_PCIE_MAX_NUM_REG] = { + [IPROC_PCIE_CLK_CTRL] = 0x000, + [IPROC_PCIE_CFG_IND_ADDR] = 0x1f0, + [IPROC_PCIE_CFG_IND_DATA] = 0x1f4, + [IPROC_PCIE_CFG_ADDR] = 0x1f8, + [IPROC_PCIE_CFG_DATA] = 0x1fc, +}; + +/* iProc PCIe PAXC v2 registers */ +static const u16 iproc_pcie_reg_paxc_v2[IPROC_PCIE_MAX_NUM_REG] = { + [IPROC_PCIE_MSI_GIC_MODE] = 0x050, + [IPROC_PCIE_MSI_BASE_ADDR] = 0x074, + [IPROC_PCIE_MSI_WINDOW_SIZE] = 0x078, + [IPROC_PCIE_MSI_ADDR_LO] = 0x07c, + [IPROC_PCIE_MSI_ADDR_HI] = 0x080, + [IPROC_PCIE_MSI_EN_CFG] = 0x09c, + [IPROC_PCIE_CFG_IND_ADDR] = 0x1f0, + [IPROC_PCIE_CFG_IND_DATA] = 0x1f4, + [IPROC_PCIE_CFG_ADDR] = 0x1f8, + [IPROC_PCIE_CFG_DATA] = 0x1fc, +}; + +/* + * List of device IDs of controllers that have corrupted capability list that + * require SW fixup + */ +static const u16 iproc_pcie_corrupt_cap_did[] = { + 0x16cd, + 0x16f0, + 0xd802, + 0xd804 +}; + +static inline struct iproc_pcie *iproc_data(struct pci_bus *bus) +{ + struct iproc_pcie *pcie = bus->sysdata; + return pcie; +} + +static inline bool iproc_pcie_reg_is_invalid(u16 reg_offset) +{ + return !!(reg_offset == IPROC_PCIE_REG_INVALID); +} + +static inline u16 iproc_pcie_reg_offset(struct iproc_pcie *pcie, + enum iproc_pcie_reg reg) +{ + return pcie->reg_offsets[reg]; +} + +static inline u32 iproc_pcie_read_reg(struct iproc_pcie *pcie, + enum iproc_pcie_reg reg) +{ + u16 offset = iproc_pcie_reg_offset(pcie, reg); + + if (iproc_pcie_reg_is_invalid(offset)) + return 0; + + return readl(pcie->base + offset); +} + +static inline void iproc_pcie_write_reg(struct iproc_pcie *pcie, + enum iproc_pcie_reg reg, u32 val) +{ + u16 offset = iproc_pcie_reg_offset(pcie, reg); + + if (iproc_pcie_reg_is_invalid(offset)) + return; + + writel(val, pcie->base + offset); +} + +/* + * APB error forwarding can be disabled during access of configuration + * registers of the endpoint device, to prevent unsupported requests + * (typically seen during enumeration with multi-function devices) from + * triggering a system exception. + */ +static inline void iproc_pcie_apb_err_disable(struct pci_bus *bus, + bool disable) +{ + struct iproc_pcie *pcie = iproc_data(bus); + u32 val; + + if (bus->number && pcie->has_apb_err_disable) { + val = iproc_pcie_read_reg(pcie, IPROC_PCIE_APB_ERR_EN); + if (disable) + val &= ~APB_ERR_EN; + else + val |= APB_ERR_EN; + iproc_pcie_write_reg(pcie, IPROC_PCIE_APB_ERR_EN, val); + } +} + +static void __iomem *iproc_pcie_map_ep_cfg_reg(struct iproc_pcie *pcie, + unsigned int busno, + unsigned int devfn, + int where) +{ + u16 offset; + u32 val; + + /* EP device access */ + val = ALIGN_DOWN(PCIE_ECAM_OFFSET(busno, devfn, where), 4) | + CFG_ADDR_CFG_TYPE_1; + + iproc_pcie_write_reg(pcie, IPROC_PCIE_CFG_ADDR, val); + offset = iproc_pcie_reg_offset(pcie, IPROC_PCIE_CFG_DATA); + + if (iproc_pcie_reg_is_invalid(offset)) + return NULL; + + return (pcie->base + offset); +} + +static unsigned int iproc_pcie_cfg_retry(struct iproc_pcie *pcie, + void __iomem *cfg_data_p) +{ + int timeout = CFG_RETRY_STATUS_TIMEOUT_US; + unsigned int data; + u32 status; + + /* + * As per PCIe spec r3.1, sec 2.3.2, CRS Software Visibility only + * affects config reads of the Vendor ID. For config writes or any + * other config reads, the Root may automatically reissue the + * configuration request again as a new request. + * + * For config reads, this hardware returns CFG_RETRY_STATUS data + * when it receives a CRS completion, regardless of the address of + * the read or the CRS Software Visibility Enable bit. As a + * partial workaround for this, we retry in software any read that + * returns CFG_RETRY_STATUS. + * + * Note that a non-Vendor ID config register may have a value of + * CFG_RETRY_STATUS. If we read that, we can't distinguish it from + * a CRS completion, so we will incorrectly retry the read and + * eventually return the wrong data (0xffffffff). + */ + data = readl(cfg_data_p); + while (data == CFG_RETRY_STATUS && timeout--) { + /* + * CRS state is set in CFG_RD status register + * This will handle the case where CFG_RETRY_STATUS is + * valid config data. + */ + status = iproc_pcie_read_reg(pcie, IPROC_PCIE_CFG_RD_STATUS); + if (status != CFG_RD_CRS) + return data; + + udelay(1); + data = readl(cfg_data_p); + } + + if (data == CFG_RETRY_STATUS) + data = 0xffffffff; + + return data; +} + +static void iproc_pcie_fix_cap(struct iproc_pcie *pcie, int where, u32 *val) +{ + u32 i, dev_id; + + switch (where & ~0x3) { + case PCI_VENDOR_ID: + dev_id = *val >> 16; + + /* + * Activate fixup for those controllers that have corrupted + * capability list registers + */ + for (i = 0; i < ARRAY_SIZE(iproc_pcie_corrupt_cap_did); i++) + if (dev_id == iproc_pcie_corrupt_cap_did[i]) + pcie->fix_paxc_cap = true; + break; + + case IPROC_PCI_PM_CAP: + if (pcie->fix_paxc_cap) { + /* advertise PM, force next capability to PCIe */ + *val &= ~IPROC_PCI_PM_CAP_MASK; + *val |= IPROC_PCI_EXP_CAP << 8 | PCI_CAP_ID_PM; + } + break; + + case IPROC_PCI_EXP_CAP: + if (pcie->fix_paxc_cap) { + /* advertise root port, version 2, terminate here */ + *val = (PCI_EXP_TYPE_ROOT_PORT << 4 | 2) << 16 | + PCI_CAP_ID_EXP; + } + break; + + case IPROC_PCI_EXP_CAP + PCI_EXP_RTCTL: + /* Don't advertise CRS SV support */ + *val &= ~(PCI_EXP_RTCAP_CRSVIS << 16); + break; + + default: + break; + } +} + +static int iproc_pcie_config_read(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 *val) +{ + struct iproc_pcie *pcie = iproc_data(bus); + unsigned int busno = bus->number; + void __iomem *cfg_data_p; + unsigned int data; + int ret; + + /* root complex access */ + if (busno == 0) { + ret = pci_generic_config_read32(bus, devfn, where, size, val); + if (ret == PCIBIOS_SUCCESSFUL) + iproc_pcie_fix_cap(pcie, where, val); + + return ret; + } + + cfg_data_p = iproc_pcie_map_ep_cfg_reg(pcie, busno, devfn, where); + + if (!cfg_data_p) + return PCIBIOS_DEVICE_NOT_FOUND; + + data = iproc_pcie_cfg_retry(pcie, cfg_data_p); + + *val = data; + if (size <= 2) + *val = (data >> (8 * (where & 3))) & ((1 << (size * 8)) - 1); + + /* + * For PAXC and PAXCv2, the total number of PFs that one can enumerate + * depends on the firmware configuration. Unfortunately, due to an ASIC + * bug, unconfigured PFs cannot be properly hidden from the root + * complex. As a result, write access to these PFs will cause bus lock + * up on the embedded processor + * + * Since all unconfigured PFs are left with an incorrect, staled device + * ID of 0x168e (PCI_DEVICE_ID_NX2_57810), we try to catch those access + * early here and reject them all + */ +#define DEVICE_ID_MASK 0xffff0000 +#define DEVICE_ID_SHIFT 16 + if (pcie->rej_unconfig_pf && + (where & CFG_ADDR_REG_NUM_MASK) == PCI_VENDOR_ID) + if ((*val & DEVICE_ID_MASK) == + (PCI_DEVICE_ID_NX2_57810 << DEVICE_ID_SHIFT)) + return PCIBIOS_FUNC_NOT_SUPPORTED; + + return PCIBIOS_SUCCESSFUL; +} + +/* + * Note access to the configuration registers are protected at the higher layer + * by 'pci_lock' in drivers/pci/access.c + */ +static void __iomem *iproc_pcie_map_cfg_bus(struct iproc_pcie *pcie, + int busno, unsigned int devfn, + int where) +{ + u16 offset; + + /* root complex access */ + if (busno == 0) { + if (PCIE_ECAM_DEVFN(devfn) > 0) + return NULL; + + iproc_pcie_write_reg(pcie, IPROC_PCIE_CFG_IND_ADDR, + where & CFG_IND_ADDR_MASK); + offset = iproc_pcie_reg_offset(pcie, IPROC_PCIE_CFG_IND_DATA); + if (iproc_pcie_reg_is_invalid(offset)) + return NULL; + else + return (pcie->base + offset); + } + + return iproc_pcie_map_ep_cfg_reg(pcie, busno, devfn, where); +} + +static void __iomem *iproc_pcie_bus_map_cfg_bus(struct pci_bus *bus, + unsigned int devfn, + int where) +{ + return iproc_pcie_map_cfg_bus(iproc_data(bus), bus->number, devfn, + where); +} + +static int iproc_pci_raw_config_read32(struct iproc_pcie *pcie, + unsigned int devfn, int where, + int size, u32 *val) +{ + void __iomem *addr; + + addr = iproc_pcie_map_cfg_bus(pcie, 0, devfn, where & ~0x3); + if (!addr) + return PCIBIOS_DEVICE_NOT_FOUND; + + *val = readl(addr); + + if (size <= 2) + *val = (*val >> (8 * (where & 3))) & ((1 << (size * 8)) - 1); + + return PCIBIOS_SUCCESSFUL; +} + +static int iproc_pci_raw_config_write32(struct iproc_pcie *pcie, + unsigned int devfn, int where, + int size, u32 val) +{ + void __iomem *addr; + u32 mask, tmp; + + addr = iproc_pcie_map_cfg_bus(pcie, 0, devfn, where & ~0x3); + if (!addr) + return PCIBIOS_DEVICE_NOT_FOUND; + + if (size == 4) { + writel(val, addr); + return PCIBIOS_SUCCESSFUL; + } + + mask = ~(((1 << (size * 8)) - 1) << ((where & 0x3) * 8)); + tmp = readl(addr) & mask; + tmp |= val << ((where & 0x3) * 8); + writel(tmp, addr); + + return PCIBIOS_SUCCESSFUL; +} + +static int iproc_pcie_config_read32(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 *val) +{ + int ret; + struct iproc_pcie *pcie = iproc_data(bus); + + iproc_pcie_apb_err_disable(bus, true); + if (pcie->iproc_cfg_read) + ret = iproc_pcie_config_read(bus, devfn, where, size, val); + else + ret = pci_generic_config_read32(bus, devfn, where, size, val); + iproc_pcie_apb_err_disable(bus, false); + + return ret; +} + +static int iproc_pcie_config_write32(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 val) +{ + int ret; + + iproc_pcie_apb_err_disable(bus, true); + ret = pci_generic_config_write32(bus, devfn, where, size, val); + iproc_pcie_apb_err_disable(bus, false); + + return ret; +} + +static struct pci_ops iproc_pcie_ops = { + .map_bus = iproc_pcie_bus_map_cfg_bus, + .read = iproc_pcie_config_read32, + .write = iproc_pcie_config_write32, +}; + +static void iproc_pcie_perst_ctrl(struct iproc_pcie *pcie, bool assert) +{ + u32 val; + + /* + * PAXC and the internal emulated endpoint device downstream should not + * be reset. If firmware has been loaded on the endpoint device at an + * earlier boot stage, reset here causes issues. + */ + if (pcie->ep_is_internal) + return; + + if (assert) { + val = iproc_pcie_read_reg(pcie, IPROC_PCIE_CLK_CTRL); + val &= ~EP_PERST_SOURCE_SELECT & ~EP_MODE_SURVIVE_PERST & + ~RC_PCIE_RST_OUTPUT; + iproc_pcie_write_reg(pcie, IPROC_PCIE_CLK_CTRL, val); + udelay(250); + } else { + val = iproc_pcie_read_reg(pcie, IPROC_PCIE_CLK_CTRL); + val |= RC_PCIE_RST_OUTPUT; + iproc_pcie_write_reg(pcie, IPROC_PCIE_CLK_CTRL, val); + msleep(100); + } +} + +int iproc_pcie_shutdown(struct iproc_pcie *pcie) +{ + iproc_pcie_perst_ctrl(pcie, true); + msleep(500); + + return 0; +} +EXPORT_SYMBOL_GPL(iproc_pcie_shutdown); + +static int iproc_pcie_check_link(struct iproc_pcie *pcie) +{ + struct device *dev = pcie->dev; + u32 hdr_type, link_ctrl, link_status, class, val; + bool link_is_active = false; + + /* + * PAXC connects to emulated endpoint devices directly and does not + * have a Serdes. Therefore skip the link detection logic here. + */ + if (pcie->ep_is_internal) + return 0; + + val = iproc_pcie_read_reg(pcie, IPROC_PCIE_LINK_STATUS); + if (!(val & PCIE_PHYLINKUP) || !(val & PCIE_DL_ACTIVE)) { + dev_err(dev, "PHY or data link is INACTIVE!\n"); + return -ENODEV; + } + + /* make sure we are not in EP mode */ + iproc_pci_raw_config_read32(pcie, 0, PCI_HEADER_TYPE, 1, &hdr_type); + if ((hdr_type & 0x7f) != PCI_HEADER_TYPE_BRIDGE) { + dev_err(dev, "in EP mode, hdr=%#02x\n", hdr_type); + return -EFAULT; + } + + /* force class to PCI_CLASS_BRIDGE_PCI_NORMAL (0x060400) */ +#define PCI_BRIDGE_CTRL_REG_OFFSET 0x43c +#define PCI_BRIDGE_CTRL_REG_CLASS_MASK 0xffffff + iproc_pci_raw_config_read32(pcie, 0, PCI_BRIDGE_CTRL_REG_OFFSET, + 4, &class); + class &= ~PCI_BRIDGE_CTRL_REG_CLASS_MASK; + class |= PCI_CLASS_BRIDGE_PCI_NORMAL; + iproc_pci_raw_config_write32(pcie, 0, PCI_BRIDGE_CTRL_REG_OFFSET, + 4, class); + + /* check link status to see if link is active */ + iproc_pci_raw_config_read32(pcie, 0, IPROC_PCI_EXP_CAP + PCI_EXP_LNKSTA, + 2, &link_status); + if (link_status & PCI_EXP_LNKSTA_NLW) + link_is_active = true; + + if (!link_is_active) { + /* try GEN 1 link speed */ +#define PCI_TARGET_LINK_SPEED_MASK 0xf +#define PCI_TARGET_LINK_SPEED_GEN2 0x2 +#define PCI_TARGET_LINK_SPEED_GEN1 0x1 + iproc_pci_raw_config_read32(pcie, 0, + IPROC_PCI_EXP_CAP + PCI_EXP_LNKCTL2, + 4, &link_ctrl); + if ((link_ctrl & PCI_TARGET_LINK_SPEED_MASK) == + PCI_TARGET_LINK_SPEED_GEN2) { + link_ctrl &= ~PCI_TARGET_LINK_SPEED_MASK; + link_ctrl |= PCI_TARGET_LINK_SPEED_GEN1; + iproc_pci_raw_config_write32(pcie, 0, + IPROC_PCI_EXP_CAP + PCI_EXP_LNKCTL2, + 4, link_ctrl); + msleep(100); + + iproc_pci_raw_config_read32(pcie, 0, + IPROC_PCI_EXP_CAP + PCI_EXP_LNKSTA, + 2, &link_status); + if (link_status & PCI_EXP_LNKSTA_NLW) + link_is_active = true; + } + } + + dev_info(dev, "link: %s\n", link_is_active ? "UP" : "DOWN"); + + return link_is_active ? 0 : -ENODEV; +} + +static void iproc_pcie_enable(struct iproc_pcie *pcie) +{ + iproc_pcie_write_reg(pcie, IPROC_PCIE_INTX_EN, SYS_RC_INTX_MASK); +} + +static inline bool iproc_pcie_ob_is_valid(struct iproc_pcie *pcie, + int window_idx) +{ + u32 val; + + val = iproc_pcie_read_reg(pcie, MAP_REG(IPROC_PCIE_OARR0, window_idx)); + + return !!(val & OARR_VALID); +} + +static inline int iproc_pcie_ob_write(struct iproc_pcie *pcie, int window_idx, + int size_idx, u64 axi_addr, u64 pci_addr) +{ + struct device *dev = pcie->dev; + u16 oarr_offset, omap_offset; + + /* + * Derive the OARR/OMAP offset from the first pair (OARR0/OMAP0) based + * on window index. + */ + oarr_offset = iproc_pcie_reg_offset(pcie, MAP_REG(IPROC_PCIE_OARR0, + window_idx)); + omap_offset = iproc_pcie_reg_offset(pcie, MAP_REG(IPROC_PCIE_OMAP0, + window_idx)); + if (iproc_pcie_reg_is_invalid(oarr_offset) || + iproc_pcie_reg_is_invalid(omap_offset)) + return -EINVAL; + + /* + * Program the OARR registers. The upper 32-bit OARR register is + * always right after the lower 32-bit OARR register. + */ + writel(lower_32_bits(axi_addr) | (size_idx << OARR_SIZE_CFG_SHIFT) | + OARR_VALID, pcie->base + oarr_offset); + writel(upper_32_bits(axi_addr), pcie->base + oarr_offset + 4); + + /* now program the OMAP registers */ + writel(lower_32_bits(pci_addr), pcie->base + omap_offset); + writel(upper_32_bits(pci_addr), pcie->base + omap_offset + 4); + + dev_dbg(dev, "ob window [%d]: offset 0x%x axi %pap pci %pap\n", + window_idx, oarr_offset, &axi_addr, &pci_addr); + dev_dbg(dev, "oarr lo 0x%x oarr hi 0x%x\n", + readl(pcie->base + oarr_offset), + readl(pcie->base + oarr_offset + 4)); + dev_dbg(dev, "omap lo 0x%x omap hi 0x%x\n", + readl(pcie->base + omap_offset), + readl(pcie->base + omap_offset + 4)); + + return 0; +} + +/* + * Some iProc SoCs require the SW to configure the outbound address mapping + * + * Outbound address translation: + * + * iproc_pcie_address = axi_address - axi_offset + * OARR = iproc_pcie_address + * OMAP = pci_addr + * + * axi_addr -> iproc_pcie_address -> OARR -> OMAP -> pci_address + */ +static int iproc_pcie_setup_ob(struct iproc_pcie *pcie, u64 axi_addr, + u64 pci_addr, resource_size_t size) +{ + struct iproc_pcie_ob *ob = &pcie->ob; + struct device *dev = pcie->dev; + int ret = -EINVAL, window_idx, size_idx; + + if (axi_addr < ob->axi_offset) { + dev_err(dev, "axi address %pap less than offset %pap\n", + &axi_addr, &ob->axi_offset); + return -EINVAL; + } + + /* + * Translate the AXI address to the internal address used by the iProc + * PCIe core before programming the OARR + */ + axi_addr -= ob->axi_offset; + + /* iterate through all OARR/OMAP mapping windows */ + for (window_idx = ob->nr_windows - 1; window_idx >= 0; window_idx--) { + const struct iproc_pcie_ob_map *ob_map = + &pcie->ob_map[window_idx]; + + /* + * If current outbound window is already in use, move on to the + * next one. + */ + if (iproc_pcie_ob_is_valid(pcie, window_idx)) + continue; + + /* + * Iterate through all supported window sizes within the + * OARR/OMAP pair to find a match. Go through the window sizes + * in a descending order. + */ + for (size_idx = ob_map->nr_sizes - 1; size_idx >= 0; + size_idx--) { + resource_size_t window_size = + ob_map->window_sizes[size_idx] * SZ_1M; + + /* + * Keep iterating until we reach the last window and + * with the minimal window size at index zero. In this + * case, we take a compromise by mapping it using the + * minimum window size that can be supported + */ + if (size < window_size) { + if (size_idx > 0 || window_idx > 0) + continue; + + /* + * For the corner case of reaching the minimal + * window size that can be supported on the + * last window + */ + axi_addr = ALIGN_DOWN(axi_addr, window_size); + pci_addr = ALIGN_DOWN(pci_addr, window_size); + size = window_size; + } + + if (!IS_ALIGNED(axi_addr, window_size) || + !IS_ALIGNED(pci_addr, window_size)) { + dev_err(dev, + "axi %pap or pci %pap not aligned\n", + &axi_addr, &pci_addr); + return -EINVAL; + } + + /* + * Match found! Program both OARR and OMAP and mark + * them as a valid entry. + */ + ret = iproc_pcie_ob_write(pcie, window_idx, size_idx, + axi_addr, pci_addr); + if (ret) + goto err_ob; + + size -= window_size; + if (size == 0) + return 0; + + /* + * If we are here, we are done with the current window, + * but not yet finished all mappings. Need to move on + * to the next window. + */ + axi_addr += window_size; + pci_addr += window_size; + break; + } + } + +err_ob: + dev_err(dev, "unable to configure outbound mapping\n"); + dev_err(dev, + "axi %pap, axi offset %pap, pci %pap, res size %pap\n", + &axi_addr, &ob->axi_offset, &pci_addr, &size); + + return ret; +} + +static int iproc_pcie_map_ranges(struct iproc_pcie *pcie, + struct list_head *resources) +{ + struct device *dev = pcie->dev; + struct resource_entry *window; + int ret; + + resource_list_for_each_entry(window, resources) { + struct resource *res = window->res; + u64 res_type = resource_type(res); + + switch (res_type) { + case IORESOURCE_IO: + case IORESOURCE_BUS: + break; + case IORESOURCE_MEM: + ret = iproc_pcie_setup_ob(pcie, res->start, + res->start - window->offset, + resource_size(res)); + if (ret) + return ret; + break; + default: + dev_err(dev, "invalid resource %pR\n", res); + return -EINVAL; + } + } + + return 0; +} + +static inline bool iproc_pcie_ib_is_in_use(struct iproc_pcie *pcie, + int region_idx) +{ + const struct iproc_pcie_ib_map *ib_map = &pcie->ib_map[region_idx]; + u32 val; + + val = iproc_pcie_read_reg(pcie, MAP_REG(IPROC_PCIE_IARR0, region_idx)); + + return !!(val & (BIT(ib_map->nr_sizes) - 1)); +} + +static inline bool iproc_pcie_ib_check_type(const struct iproc_pcie_ib_map *ib_map, + enum iproc_pcie_ib_map_type type) +{ + return !!(ib_map->type == type); +} + +static int iproc_pcie_ib_write(struct iproc_pcie *pcie, int region_idx, + int size_idx, int nr_windows, u64 axi_addr, + u64 pci_addr, resource_size_t size) +{ + struct device *dev = pcie->dev; + const struct iproc_pcie_ib_map *ib_map = &pcie->ib_map[region_idx]; + u16 iarr_offset, imap_offset; + u32 val; + int window_idx; + + iarr_offset = iproc_pcie_reg_offset(pcie, + MAP_REG(IPROC_PCIE_IARR0, region_idx)); + imap_offset = iproc_pcie_reg_offset(pcie, + MAP_REG(IPROC_PCIE_IMAP0, region_idx)); + if (iproc_pcie_reg_is_invalid(iarr_offset) || + iproc_pcie_reg_is_invalid(imap_offset)) + return -EINVAL; + + dev_dbg(dev, "ib region [%d]: offset 0x%x axi %pap pci %pap\n", + region_idx, iarr_offset, &axi_addr, &pci_addr); + + /* + * Program the IARR registers. The upper 32-bit IARR register is + * always right after the lower 32-bit IARR register. + */ + writel(lower_32_bits(pci_addr) | BIT(size_idx), + pcie->base + iarr_offset); + writel(upper_32_bits(pci_addr), pcie->base + iarr_offset + 4); + + dev_dbg(dev, "iarr lo 0x%x iarr hi 0x%x\n", + readl(pcie->base + iarr_offset), + readl(pcie->base + iarr_offset + 4)); + + /* + * Now program the IMAP registers. Each IARR region may have one or + * more IMAP windows. + */ + size >>= ilog2(nr_windows); + for (window_idx = 0; window_idx < nr_windows; window_idx++) { + val = readl(pcie->base + imap_offset); + val |= lower_32_bits(axi_addr) | IMAP_VALID; + writel(val, pcie->base + imap_offset); + writel(upper_32_bits(axi_addr), + pcie->base + imap_offset + ib_map->imap_addr_offset); + + dev_dbg(dev, "imap window [%d] lo 0x%x hi 0x%x\n", + window_idx, readl(pcie->base + imap_offset), + readl(pcie->base + imap_offset + + ib_map->imap_addr_offset)); + + imap_offset += ib_map->imap_window_offset; + axi_addr += size; + } + + return 0; +} + +static int iproc_pcie_setup_ib(struct iproc_pcie *pcie, + struct resource_entry *entry, + enum iproc_pcie_ib_map_type type) +{ + struct device *dev = pcie->dev; + struct iproc_pcie_ib *ib = &pcie->ib; + int ret; + unsigned int region_idx, size_idx; + u64 axi_addr = entry->res->start; + u64 pci_addr = entry->res->start - entry->offset; + resource_size_t size = resource_size(entry->res); + + /* iterate through all IARR mapping regions */ + for (region_idx = 0; region_idx < ib->nr_regions; region_idx++) { + const struct iproc_pcie_ib_map *ib_map = + &pcie->ib_map[region_idx]; + + /* + * If current inbound region is already in use or not a + * compatible type, move on to the next. + */ + if (iproc_pcie_ib_is_in_use(pcie, region_idx) || + !iproc_pcie_ib_check_type(ib_map, type)) + continue; + + /* iterate through all supported region sizes to find a match */ + for (size_idx = 0; size_idx < ib_map->nr_sizes; size_idx++) { + resource_size_t region_size = + ib_map->region_sizes[size_idx] * ib_map->size_unit; + + if (size != region_size) + continue; + + if (!IS_ALIGNED(axi_addr, region_size) || + !IS_ALIGNED(pci_addr, region_size)) { + dev_err(dev, + "axi %pap or pci %pap not aligned\n", + &axi_addr, &pci_addr); + return -EINVAL; + } + + /* Match found! Program IARR and all IMAP windows. */ + ret = iproc_pcie_ib_write(pcie, region_idx, size_idx, + ib_map->nr_windows, axi_addr, + pci_addr, size); + if (ret) + goto err_ib; + else + return 0; + + } + } + ret = -EINVAL; + +err_ib: + dev_err(dev, "unable to configure inbound mapping\n"); + dev_err(dev, "axi %pap, pci %pap, res size %pap\n", + &axi_addr, &pci_addr, &size); + + return ret; +} + +static int iproc_pcie_map_dma_ranges(struct iproc_pcie *pcie) +{ + struct pci_host_bridge *host = pci_host_bridge_from_priv(pcie); + struct resource_entry *entry; + int ret = 0; + + resource_list_for_each_entry(entry, &host->dma_ranges) { + /* Each range entry corresponds to an inbound mapping region */ + ret = iproc_pcie_setup_ib(pcie, entry, IPROC_PCIE_IB_MAP_MEM); + if (ret) + break; + } + + return ret; +} + +static void iproc_pcie_invalidate_mapping(struct iproc_pcie *pcie) +{ + struct iproc_pcie_ib *ib = &pcie->ib; + struct iproc_pcie_ob *ob = &pcie->ob; + int idx; + + if (pcie->ep_is_internal) + return; + + if (pcie->need_ob_cfg) { + /* iterate through all OARR mapping regions */ + for (idx = ob->nr_windows - 1; idx >= 0; idx--) { + iproc_pcie_write_reg(pcie, + MAP_REG(IPROC_PCIE_OARR0, idx), 0); + } + } + + if (pcie->need_ib_cfg) { + /* iterate through all IARR mapping regions */ + for (idx = 0; idx < ib->nr_regions; idx++) { + iproc_pcie_write_reg(pcie, + MAP_REG(IPROC_PCIE_IARR0, idx), 0); + } + } +} + +static int iproce_pcie_get_msi(struct iproc_pcie *pcie, + struct device_node *msi_node, + u64 *msi_addr) +{ + struct device *dev = pcie->dev; + int ret; + struct resource res; + + /* + * Check if 'msi-map' points to ARM GICv3 ITS, which is the only + * supported external MSI controller that requires steering. + */ + if (!of_device_is_compatible(msi_node, "arm,gic-v3-its")) { + dev_err(dev, "unable to find compatible MSI controller\n"); + return -ENODEV; + } + + /* derive GITS_TRANSLATER address from GICv3 */ + ret = of_address_to_resource(msi_node, 0, &res); + if (ret < 0) { + dev_err(dev, "unable to obtain MSI controller resources\n"); + return ret; + } + + *msi_addr = res.start + GITS_TRANSLATER; + return 0; +} + +static int iproc_pcie_paxb_v2_msi_steer(struct iproc_pcie *pcie, u64 msi_addr) +{ + int ret; + struct resource_entry entry; + + memset(&entry, 0, sizeof(entry)); + entry.res = &entry.__res; + + msi_addr &= ~(SZ_32K - 1); + entry.res->start = msi_addr; + entry.res->end = msi_addr + SZ_32K - 1; + + ret = iproc_pcie_setup_ib(pcie, &entry, IPROC_PCIE_IB_MAP_IO); + return ret; +} + +static void iproc_pcie_paxc_v2_msi_steer(struct iproc_pcie *pcie, u64 msi_addr, + bool enable) +{ + u32 val; + + if (!enable) { + /* + * Disable PAXC MSI steering. All write transfers will be + * treated as non-MSI transfers + */ + val = iproc_pcie_read_reg(pcie, IPROC_PCIE_MSI_EN_CFG); + val &= ~MSI_ENABLE_CFG; + iproc_pcie_write_reg(pcie, IPROC_PCIE_MSI_EN_CFG, val); + return; + } + + /* + * Program bits [43:13] of address of GITS_TRANSLATER register into + * bits [30:0] of the MSI base address register. In fact, in all iProc + * based SoCs, all I/O register bases are well below the 32-bit + * boundary, so we can safely assume bits [43:32] are always zeros. + */ + iproc_pcie_write_reg(pcie, IPROC_PCIE_MSI_BASE_ADDR, + (u32)(msi_addr >> 13)); + + /* use a default 8K window size */ + iproc_pcie_write_reg(pcie, IPROC_PCIE_MSI_WINDOW_SIZE, 0); + + /* steering MSI to GICv3 ITS */ + val = iproc_pcie_read_reg(pcie, IPROC_PCIE_MSI_GIC_MODE); + val |= GIC_V3_CFG; + iproc_pcie_write_reg(pcie, IPROC_PCIE_MSI_GIC_MODE, val); + + /* + * Program bits [43:2] of address of GITS_TRANSLATER register into the + * iProc MSI address registers. + */ + msi_addr >>= 2; + iproc_pcie_write_reg(pcie, IPROC_PCIE_MSI_ADDR_HI, + upper_32_bits(msi_addr)); + iproc_pcie_write_reg(pcie, IPROC_PCIE_MSI_ADDR_LO, + lower_32_bits(msi_addr)); + + /* enable MSI */ + val = iproc_pcie_read_reg(pcie, IPROC_PCIE_MSI_EN_CFG); + val |= MSI_ENABLE_CFG; + iproc_pcie_write_reg(pcie, IPROC_PCIE_MSI_EN_CFG, val); +} + +static int iproc_pcie_msi_steer(struct iproc_pcie *pcie, + struct device_node *msi_node) +{ + struct device *dev = pcie->dev; + int ret; + u64 msi_addr; + + ret = iproce_pcie_get_msi(pcie, msi_node, &msi_addr); + if (ret < 0) { + dev_err(dev, "msi steering failed\n"); + return ret; + } + + switch (pcie->type) { + case IPROC_PCIE_PAXB_V2: + ret = iproc_pcie_paxb_v2_msi_steer(pcie, msi_addr); + if (ret) + return ret; + break; + case IPROC_PCIE_PAXC_V2: + iproc_pcie_paxc_v2_msi_steer(pcie, msi_addr, true); + break; + default: + return -EINVAL; + } + + return 0; +} + +static int iproc_pcie_msi_enable(struct iproc_pcie *pcie) +{ + struct device_node *msi_node; + int ret; + + /* + * Either the "msi-parent" or the "msi-map" phandle needs to exist + * for us to obtain the MSI node. + */ + + msi_node = of_parse_phandle(pcie->dev->of_node, "msi-parent", 0); + if (!msi_node) { + const __be32 *msi_map = NULL; + int len; + u32 phandle; + + msi_map = of_get_property(pcie->dev->of_node, "msi-map", &len); + if (!msi_map) + return -ENODEV; + + phandle = be32_to_cpup(msi_map + 1); + msi_node = of_find_node_by_phandle(phandle); + if (!msi_node) + return -ENODEV; + } + + /* + * Certain revisions of the iProc PCIe controller require additional + * configurations to steer the MSI writes towards an external MSI + * controller. + */ + if (pcie->need_msi_steer) { + ret = iproc_pcie_msi_steer(pcie, msi_node); + if (ret) + goto out_put_node; + } + + /* + * If another MSI controller is being used, the call below should fail + * but that is okay + */ + ret = iproc_msi_init(pcie, msi_node); + +out_put_node: + of_node_put(msi_node); + return ret; +} + +static void iproc_pcie_msi_disable(struct iproc_pcie *pcie) +{ + iproc_msi_exit(pcie); +} + +static int iproc_pcie_rev_init(struct iproc_pcie *pcie) +{ + struct device *dev = pcie->dev; + unsigned int reg_idx; + const u16 *regs; + + switch (pcie->type) { + case IPROC_PCIE_PAXB_BCMA: + regs = iproc_pcie_reg_paxb_bcma; + break; + case IPROC_PCIE_PAXB: + regs = iproc_pcie_reg_paxb; + pcie->has_apb_err_disable = true; + if (pcie->need_ob_cfg) { + pcie->ob_map = paxb_ob_map; + pcie->ob.nr_windows = ARRAY_SIZE(paxb_ob_map); + } + break; + case IPROC_PCIE_PAXB_V2: + regs = iproc_pcie_reg_paxb_v2; + pcie->iproc_cfg_read = true; + pcie->has_apb_err_disable = true; + if (pcie->need_ob_cfg) { + pcie->ob_map = paxb_v2_ob_map; + pcie->ob.nr_windows = ARRAY_SIZE(paxb_v2_ob_map); + } + pcie->ib.nr_regions = ARRAY_SIZE(paxb_v2_ib_map); + pcie->ib_map = paxb_v2_ib_map; + pcie->need_msi_steer = true; + dev_warn(dev, "reads of config registers that contain %#x return incorrect data\n", + CFG_RETRY_STATUS); + break; + case IPROC_PCIE_PAXC: + regs = iproc_pcie_reg_paxc; + pcie->ep_is_internal = true; + pcie->iproc_cfg_read = true; + pcie->rej_unconfig_pf = true; + break; + case IPROC_PCIE_PAXC_V2: + regs = iproc_pcie_reg_paxc_v2; + pcie->ep_is_internal = true; + pcie->iproc_cfg_read = true; + pcie->rej_unconfig_pf = true; + pcie->need_msi_steer = true; + break; + default: + dev_err(dev, "incompatible iProc PCIe interface\n"); + return -EINVAL; + } + + pcie->reg_offsets = devm_kcalloc(dev, IPROC_PCIE_MAX_NUM_REG, + sizeof(*pcie->reg_offsets), + GFP_KERNEL); + if (!pcie->reg_offsets) + return -ENOMEM; + + /* go through the register table and populate all valid registers */ + pcie->reg_offsets[0] = (pcie->type == IPROC_PCIE_PAXC_V2) ? + IPROC_PCIE_REG_INVALID : regs[0]; + for (reg_idx = 1; reg_idx < IPROC_PCIE_MAX_NUM_REG; reg_idx++) + pcie->reg_offsets[reg_idx] = regs[reg_idx] ? + regs[reg_idx] : IPROC_PCIE_REG_INVALID; + + return 0; +} + +int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res) +{ + struct device *dev; + int ret; + struct pci_dev *pdev; + struct pci_host_bridge *host = pci_host_bridge_from_priv(pcie); + + dev = pcie->dev; + + ret = iproc_pcie_rev_init(pcie); + if (ret) { + dev_err(dev, "unable to initialize controller parameters\n"); + return ret; + } + + ret = phy_init(pcie->phy); + if (ret) { + dev_err(dev, "unable to initialize PCIe PHY\n"); + return ret; + } + + ret = phy_power_on(pcie->phy); + if (ret) { + dev_err(dev, "unable to power on PCIe PHY\n"); + goto err_exit_phy; + } + + iproc_pcie_perst_ctrl(pcie, true); + iproc_pcie_perst_ctrl(pcie, false); + + iproc_pcie_invalidate_mapping(pcie); + + if (pcie->need_ob_cfg) { + ret = iproc_pcie_map_ranges(pcie, res); + if (ret) { + dev_err(dev, "map failed\n"); + goto err_power_off_phy; + } + } + + if (pcie->need_ib_cfg) { + ret = iproc_pcie_map_dma_ranges(pcie); + if (ret && ret != -ENOENT) + goto err_power_off_phy; + } + + ret = iproc_pcie_check_link(pcie); + if (ret) { + dev_err(dev, "no PCIe EP device detected\n"); + goto err_power_off_phy; + } + + iproc_pcie_enable(pcie); + + if (IS_ENABLED(CONFIG_PCI_MSI)) + if (iproc_pcie_msi_enable(pcie)) + dev_info(dev, "not using iProc MSI\n"); + + host->ops = &iproc_pcie_ops; + host->sysdata = pcie; + host->map_irq = pcie->map_irq; + + ret = pci_host_probe(host); + if (ret < 0) { + dev_err(dev, "failed to scan host: %d\n", ret); + goto err_power_off_phy; + } + + for_each_pci_bridge(pdev, host->bus) { + if (pci_pcie_type(pdev) == PCI_EXP_TYPE_ROOT_PORT) + pcie_print_link_status(pdev); + } + + return 0; + +err_power_off_phy: + phy_power_off(pcie->phy); +err_exit_phy: + phy_exit(pcie->phy); + return ret; +} +EXPORT_SYMBOL(iproc_pcie_setup); + +void iproc_pcie_remove(struct iproc_pcie *pcie) +{ + struct pci_host_bridge *host = pci_host_bridge_from_priv(pcie); + + pci_stop_root_bus(host->bus); + pci_remove_root_bus(host->bus); + + iproc_pcie_msi_disable(pcie); + + phy_power_off(pcie->phy); + phy_exit(pcie->phy); +} +EXPORT_SYMBOL(iproc_pcie_remove); + +/* + * The MSI parsing logic in certain revisions of Broadcom PAXC based root + * complex does not work and needs to be disabled + */ +static void quirk_paxc_disable_msi_parsing(struct pci_dev *pdev) +{ + struct iproc_pcie *pcie = iproc_data(pdev->bus); + + if (pdev->hdr_type == PCI_HEADER_TYPE_BRIDGE) + iproc_pcie_paxc_v2_msi_steer(pcie, 0, false); +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0x16f0, + quirk_paxc_disable_msi_parsing); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0xd802, + quirk_paxc_disable_msi_parsing); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0xd804, + quirk_paxc_disable_msi_parsing); + +static void quirk_paxc_bridge(struct pci_dev *pdev) +{ + /* + * The PCI config space is shared with the PAXC root port and the first + * Ethernet device. So, we need to workaround this by telling the PCI + * code that the bridge is not an Ethernet device. + */ + if (pdev->hdr_type == PCI_HEADER_TYPE_BRIDGE) + pdev->class = PCI_CLASS_BRIDGE_PCI_NORMAL; + + /* + * MPSS is not being set properly (as it is currently 0). This is + * because that area of the PCI config space is hard coded to zero, and + * is not modifiable by firmware. Set this to 2 (e.g., 512 byte MPS) + * so that the MPS can be set to the real max value. + */ + pdev->pcie_mpss = 2; +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0x16cd, quirk_paxc_bridge); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0x16f0, quirk_paxc_bridge); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0xd750, quirk_paxc_bridge); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0xd802, quirk_paxc_bridge); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0xd804, quirk_paxc_bridge); + +MODULE_AUTHOR("Ray Jui <rjui@broadcom.com>"); +MODULE_DESCRIPTION("Broadcom iPROC PCIe common driver"); +MODULE_LICENSE("GPL v2"); |