summaryrefslogtreecommitdiffstats
path: root/drivers/pci/hotplug/cpqphp_pci.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/pci/hotplug/cpqphp_pci.c')
-rw-r--r--drivers/pci/hotplug/cpqphp_pci.c1562
1 files changed, 1562 insertions, 0 deletions
diff --git a/drivers/pci/hotplug/cpqphp_pci.c b/drivers/pci/hotplug/cpqphp_pci.c
new file mode 100644
index 0000000000..3b248426a9
--- /dev/null
+++ b/drivers/pci/hotplug/cpqphp_pci.c
@@ -0,0 +1,1562 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Compaq Hot Plug Controller Driver
+ *
+ * Copyright (C) 1995,2001 Compaq Computer Corporation
+ * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
+ * Copyright (C) 2001 IBM Corp.
+ *
+ * All rights reserved.
+ *
+ * Send feedback to <greg@kroah.com>
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+#include <linux/proc_fs.h>
+#include <linux/pci.h>
+#include <linux/pci_hotplug.h>
+#include "../pci.h"
+#include "cpqphp.h"
+#include "cpqphp_nvram.h"
+
+
+u8 cpqhp_nic_irq;
+u8 cpqhp_disk_irq;
+
+static u16 unused_IRQ;
+
+/*
+ * detect_HRT_floating_pointer
+ *
+ * find the Hot Plug Resource Table in the specified region of memory.
+ *
+ */
+static void __iomem *detect_HRT_floating_pointer(void __iomem *begin, void __iomem *end)
+{
+ void __iomem *fp;
+ void __iomem *endp;
+ u8 temp1, temp2, temp3, temp4;
+ int status = 0;
+
+ endp = (end - sizeof(struct hrt) + 1);
+
+ for (fp = begin; fp <= endp; fp += 16) {
+ temp1 = readb(fp + SIG0);
+ temp2 = readb(fp + SIG1);
+ temp3 = readb(fp + SIG2);
+ temp4 = readb(fp + SIG3);
+ if (temp1 == '$' &&
+ temp2 == 'H' &&
+ temp3 == 'R' &&
+ temp4 == 'T') {
+ status = 1;
+ break;
+ }
+ }
+
+ if (!status)
+ fp = NULL;
+
+ dbg("Discovered Hotplug Resource Table at %p\n", fp);
+ return fp;
+}
+
+
+int cpqhp_configure_device(struct controller *ctrl, struct pci_func *func)
+{
+ struct pci_bus *child;
+ int num;
+
+ pci_lock_rescan_remove();
+
+ if (func->pci_dev == NULL)
+ func->pci_dev = pci_get_domain_bus_and_slot(0, func->bus,
+ PCI_DEVFN(func->device,
+ func->function));
+
+ /* No pci device, we need to create it then */
+ if (func->pci_dev == NULL) {
+ dbg("INFO: pci_dev still null\n");
+
+ num = pci_scan_slot(ctrl->pci_dev->bus, PCI_DEVFN(func->device, func->function));
+ if (num)
+ pci_bus_add_devices(ctrl->pci_dev->bus);
+
+ func->pci_dev = pci_get_domain_bus_and_slot(0, func->bus,
+ PCI_DEVFN(func->device,
+ func->function));
+ if (func->pci_dev == NULL) {
+ dbg("ERROR: pci_dev still null\n");
+ goto out;
+ }
+ }
+
+ if (func->pci_dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
+ pci_hp_add_bridge(func->pci_dev);
+ child = func->pci_dev->subordinate;
+ if (child)
+ pci_bus_add_devices(child);
+ }
+
+ pci_dev_put(func->pci_dev);
+
+ out:
+ pci_unlock_rescan_remove();
+ return 0;
+}
+
+
+int cpqhp_unconfigure_device(struct pci_func *func)
+{
+ int j;
+
+ dbg("%s: bus/dev/func = %x/%x/%x\n", __func__, func->bus, func->device, func->function);
+
+ pci_lock_rescan_remove();
+ for (j = 0; j < 8 ; j++) {
+ struct pci_dev *temp = pci_get_domain_bus_and_slot(0,
+ func->bus,
+ PCI_DEVFN(func->device,
+ j));
+ if (temp) {
+ pci_dev_put(temp);
+ pci_stop_and_remove_bus_device(temp);
+ }
+ }
+ pci_unlock_rescan_remove();
+ return 0;
+}
+
+static int PCI_RefinedAccessConfig(struct pci_bus *bus, unsigned int devfn, u8 offset, u32 *value)
+{
+ u32 vendID = 0;
+
+ if (pci_bus_read_config_dword(bus, devfn, PCI_VENDOR_ID, &vendID) == -1)
+ return -1;
+ if (vendID == 0xffffffff)
+ return -1;
+ return pci_bus_read_config_dword(bus, devfn, offset, value);
+}
+
+
+/*
+ * cpqhp_set_irq
+ *
+ * @bus_num: bus number of PCI device
+ * @dev_num: device number of PCI device
+ * @slot: pointer to u8 where slot number will be returned
+ */
+int cpqhp_set_irq(u8 bus_num, u8 dev_num, u8 int_pin, u8 irq_num)
+{
+ int rc = 0;
+
+ if (cpqhp_legacy_mode) {
+ struct pci_dev *fakedev;
+ struct pci_bus *fakebus;
+ u16 temp_word;
+
+ fakedev = kmalloc(sizeof(*fakedev), GFP_KERNEL);
+ fakebus = kmalloc(sizeof(*fakebus), GFP_KERNEL);
+ if (!fakedev || !fakebus) {
+ kfree(fakedev);
+ kfree(fakebus);
+ return -ENOMEM;
+ }
+
+ fakedev->devfn = dev_num << 3;
+ fakedev->bus = fakebus;
+ fakebus->number = bus_num;
+ dbg("%s: dev %d, bus %d, pin %d, num %d\n",
+ __func__, dev_num, bus_num, int_pin, irq_num);
+ rc = pcibios_set_irq_routing(fakedev, int_pin - 1, irq_num);
+ kfree(fakedev);
+ kfree(fakebus);
+ dbg("%s: rc %d\n", __func__, rc);
+ if (!rc)
+ return !rc;
+
+ /* set the Edge Level Control Register (ELCR) */
+ temp_word = inb(0x4d0);
+ temp_word |= inb(0x4d1) << 8;
+
+ temp_word |= 0x01 << irq_num;
+
+ /* This should only be for x86 as it sets the Edge Level
+ * Control Register
+ */
+ outb((u8)(temp_word & 0xFF), 0x4d0);
+ outb((u8)((temp_word & 0xFF00) >> 8), 0x4d1);
+ rc = 0;
+ }
+
+ return rc;
+}
+
+
+static int PCI_ScanBusForNonBridge(struct controller *ctrl, u8 bus_num, u8 *dev_num)
+{
+ u16 tdevice;
+ u32 work;
+ u8 tbus;
+
+ ctrl->pci_bus->number = bus_num;
+
+ for (tdevice = 0; tdevice < 0xFF; tdevice++) {
+ /* Scan for access first */
+ if (PCI_RefinedAccessConfig(ctrl->pci_bus, tdevice, 0x08, &work) == -1)
+ continue;
+ dbg("Looking for nonbridge bus_num %d dev_num %d\n", bus_num, tdevice);
+ /* Yep we got one. Not a bridge ? */
+ if ((work >> 8) != PCI_TO_PCI_BRIDGE_CLASS) {
+ *dev_num = tdevice;
+ dbg("found it !\n");
+ return 0;
+ }
+ }
+ for (tdevice = 0; tdevice < 0xFF; tdevice++) {
+ /* Scan for access first */
+ if (PCI_RefinedAccessConfig(ctrl->pci_bus, tdevice, 0x08, &work) == -1)
+ continue;
+ dbg("Looking for bridge bus_num %d dev_num %d\n", bus_num, tdevice);
+ /* Yep we got one. bridge ? */
+ if ((work >> 8) == PCI_TO_PCI_BRIDGE_CLASS) {
+ pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(tdevice, 0), PCI_SECONDARY_BUS, &tbus);
+ /* XXX: no recursion, wtf? */
+ dbg("Recurse on bus_num %d tdevice %d\n", tbus, tdevice);
+ return 0;
+ }
+ }
+
+ return -1;
+}
+
+
+static int PCI_GetBusDevHelper(struct controller *ctrl, u8 *bus_num, u8 *dev_num, u8 slot, u8 nobridge)
+{
+ int loop, len;
+ u32 work;
+ u8 tbus, tdevice, tslot;
+
+ len = cpqhp_routing_table_length();
+ for (loop = 0; loop < len; ++loop) {
+ tbus = cpqhp_routing_table->slots[loop].bus;
+ tdevice = cpqhp_routing_table->slots[loop].devfn;
+ tslot = cpqhp_routing_table->slots[loop].slot;
+
+ if (tslot == slot) {
+ *bus_num = tbus;
+ *dev_num = tdevice;
+ ctrl->pci_bus->number = tbus;
+ pci_bus_read_config_dword(ctrl->pci_bus, *dev_num, PCI_VENDOR_ID, &work);
+ if (!nobridge || (work == 0xffffffff))
+ return 0;
+
+ dbg("bus_num %d devfn %d\n", *bus_num, *dev_num);
+ pci_bus_read_config_dword(ctrl->pci_bus, *dev_num, PCI_CLASS_REVISION, &work);
+ dbg("work >> 8 (%x) = BRIDGE (%x)\n", work >> 8, PCI_TO_PCI_BRIDGE_CLASS);
+
+ if ((work >> 8) == PCI_TO_PCI_BRIDGE_CLASS) {
+ pci_bus_read_config_byte(ctrl->pci_bus, *dev_num, PCI_SECONDARY_BUS, &tbus);
+ dbg("Scan bus for Non Bridge: bus %d\n", tbus);
+ if (PCI_ScanBusForNonBridge(ctrl, tbus, dev_num) == 0) {
+ *bus_num = tbus;
+ return 0;
+ }
+ } else
+ return 0;
+ }
+ }
+ return -1;
+}
+
+
+int cpqhp_get_bus_dev(struct controller *ctrl, u8 *bus_num, u8 *dev_num, u8 slot)
+{
+ /* plain (bridges allowed) */
+ return PCI_GetBusDevHelper(ctrl, bus_num, dev_num, slot, 0);
+}
+
+
+/* More PCI configuration routines; this time centered around hotplug
+ * controller
+ */
+
+
+/*
+ * cpqhp_save_config
+ *
+ * Reads configuration for all slots in a PCI bus and saves info.
+ *
+ * Note: For non-hot plug buses, the slot # saved is the device #
+ *
+ * returns 0 if success
+ */
+int cpqhp_save_config(struct controller *ctrl, int busnumber, int is_hot_plug)
+{
+ long rc;
+ u8 class_code;
+ u8 header_type;
+ u32 ID;
+ u8 secondary_bus;
+ struct pci_func *new_slot;
+ int sub_bus;
+ int FirstSupported;
+ int LastSupported;
+ int max_functions;
+ int function;
+ u8 DevError;
+ int device = 0;
+ int cloop = 0;
+ int stop_it;
+ int index;
+ u16 devfn;
+
+ /* Decide which slots are supported */
+
+ if (is_hot_plug) {
+ /*
+ * is_hot_plug is the slot mask
+ */
+ FirstSupported = is_hot_plug >> 4;
+ LastSupported = FirstSupported + (is_hot_plug & 0x0F) - 1;
+ } else {
+ FirstSupported = 0;
+ LastSupported = 0x1F;
+ }
+
+ /* Save PCI configuration space for all devices in supported slots */
+ ctrl->pci_bus->number = busnumber;
+ for (device = FirstSupported; device <= LastSupported; device++) {
+ ID = 0xFFFFFFFF;
+ rc = pci_bus_read_config_dword(ctrl->pci_bus, PCI_DEVFN(device, 0), PCI_VENDOR_ID, &ID);
+
+ if (ID == 0xFFFFFFFF) {
+ if (is_hot_plug) {
+ /* Setup slot structure with entry for empty
+ * slot
+ */
+ new_slot = cpqhp_slot_create(busnumber);
+ if (new_slot == NULL)
+ return 1;
+
+ new_slot->bus = (u8) busnumber;
+ new_slot->device = (u8) device;
+ new_slot->function = 0;
+ new_slot->is_a_board = 0;
+ new_slot->presence_save = 0;
+ new_slot->switch_save = 0;
+ }
+ continue;
+ }
+
+ rc = pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(device, 0), 0x0B, &class_code);
+ if (rc)
+ return rc;
+
+ rc = pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(device, 0), PCI_HEADER_TYPE, &header_type);
+ if (rc)
+ return rc;
+
+ /* If multi-function device, set max_functions to 8 */
+ if (header_type & 0x80)
+ max_functions = 8;
+ else
+ max_functions = 1;
+
+ function = 0;
+
+ do {
+ DevError = 0;
+ if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
+ /* Recurse the subordinate bus
+ * get the subordinate bus number
+ */
+ rc = pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(device, function), PCI_SECONDARY_BUS, &secondary_bus);
+ if (rc) {
+ return rc;
+ } else {
+ sub_bus = (int) secondary_bus;
+
+ /* Save secondary bus cfg spc
+ * with this recursive call.
+ */
+ rc = cpqhp_save_config(ctrl, sub_bus, 0);
+ if (rc)
+ return rc;
+ ctrl->pci_bus->number = busnumber;
+ }
+ }
+
+ index = 0;
+ new_slot = cpqhp_slot_find(busnumber, device, index++);
+ while (new_slot &&
+ (new_slot->function != (u8) function))
+ new_slot = cpqhp_slot_find(busnumber, device, index++);
+
+ if (!new_slot) {
+ /* Setup slot structure. */
+ new_slot = cpqhp_slot_create(busnumber);
+ if (new_slot == NULL)
+ return 1;
+ }
+
+ new_slot->bus = (u8) busnumber;
+ new_slot->device = (u8) device;
+ new_slot->function = (u8) function;
+ new_slot->is_a_board = 1;
+ new_slot->switch_save = 0x10;
+ /* In case of unsupported board */
+ new_slot->status = DevError;
+ devfn = (new_slot->device << 3) | new_slot->function;
+ new_slot->pci_dev = pci_get_domain_bus_and_slot(0,
+ new_slot->bus, devfn);
+
+ for (cloop = 0; cloop < 0x20; cloop++) {
+ rc = pci_bus_read_config_dword(ctrl->pci_bus, PCI_DEVFN(device, function), cloop << 2, (u32 *) &(new_slot->config_space[cloop]));
+ if (rc)
+ return rc;
+ }
+
+ pci_dev_put(new_slot->pci_dev);
+
+ function++;
+
+ stop_it = 0;
+
+ /* this loop skips to the next present function
+ * reading in Class Code and Header type.
+ */
+ while ((function < max_functions) && (!stop_it)) {
+ rc = pci_bus_read_config_dword(ctrl->pci_bus, PCI_DEVFN(device, function), PCI_VENDOR_ID, &ID);
+ if (ID == 0xFFFFFFFF) {
+ function++;
+ continue;
+ }
+ rc = pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(device, function), 0x0B, &class_code);
+ if (rc)
+ return rc;
+
+ rc = pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(device, function), PCI_HEADER_TYPE, &header_type);
+ if (rc)
+ return rc;
+
+ stop_it++;
+ }
+
+ } while (function < max_functions);
+ } /* End of FOR loop */
+
+ return 0;
+}
+
+
+/*
+ * cpqhp_save_slot_config
+ *
+ * Saves configuration info for all PCI devices in a given slot
+ * including subordinate buses.
+ *
+ * returns 0 if success
+ */
+int cpqhp_save_slot_config(struct controller *ctrl, struct pci_func *new_slot)
+{
+ long rc;
+ u8 class_code;
+ u8 header_type;
+ u32 ID;
+ u8 secondary_bus;
+ int sub_bus;
+ int max_functions;
+ int function = 0;
+ int cloop;
+ int stop_it;
+
+ ID = 0xFFFFFFFF;
+
+ ctrl->pci_bus->number = new_slot->bus;
+ pci_bus_read_config_dword(ctrl->pci_bus, PCI_DEVFN(new_slot->device, 0), PCI_VENDOR_ID, &ID);
+
+ if (ID == 0xFFFFFFFF)
+ return 2;
+
+ pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(new_slot->device, 0), 0x0B, &class_code);
+ pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(new_slot->device, 0), PCI_HEADER_TYPE, &header_type);
+
+ if (header_type & 0x80) /* Multi-function device */
+ max_functions = 8;
+ else
+ max_functions = 1;
+
+ while (function < max_functions) {
+ if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
+ /* Recurse the subordinate bus */
+ pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), PCI_SECONDARY_BUS, &secondary_bus);
+
+ sub_bus = (int) secondary_bus;
+
+ /* Save the config headers for the secondary
+ * bus.
+ */
+ rc = cpqhp_save_config(ctrl, sub_bus, 0);
+ if (rc)
+ return(rc);
+ ctrl->pci_bus->number = new_slot->bus;
+
+ }
+
+ new_slot->status = 0;
+
+ for (cloop = 0; cloop < 0x20; cloop++)
+ pci_bus_read_config_dword(ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), cloop << 2, (u32 *) &(new_slot->config_space[cloop]));
+
+ function++;
+
+ stop_it = 0;
+
+ /* this loop skips to the next present function
+ * reading in the Class Code and the Header type.
+ */
+ while ((function < max_functions) && (!stop_it)) {
+ pci_bus_read_config_dword(ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), PCI_VENDOR_ID, &ID);
+
+ if (ID == 0xFFFFFFFF)
+ function++;
+ else {
+ pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), 0x0B, &class_code);
+ pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), PCI_HEADER_TYPE, &header_type);
+ stop_it++;
+ }
+ }
+
+ }
+
+ return 0;
+}
+
+
+/*
+ * cpqhp_save_base_addr_length
+ *
+ * Saves the length of all base address registers for the
+ * specified slot. this is for hot plug REPLACE
+ *
+ * returns 0 if success
+ */
+int cpqhp_save_base_addr_length(struct controller *ctrl, struct pci_func *func)
+{
+ u8 cloop;
+ u8 header_type;
+ u8 secondary_bus;
+ u8 type;
+ int sub_bus;
+ u32 temp_register;
+ u32 base;
+ u32 rc;
+ struct pci_func *next;
+ int index = 0;
+ struct pci_bus *pci_bus = ctrl->pci_bus;
+ unsigned int devfn;
+
+ func = cpqhp_slot_find(func->bus, func->device, index++);
+
+ while (func != NULL) {
+ pci_bus->number = func->bus;
+ devfn = PCI_DEVFN(func->device, func->function);
+
+ /* Check for Bridge */
+ pci_bus_read_config_byte(pci_bus, devfn, PCI_HEADER_TYPE, &header_type);
+
+ if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
+ pci_bus_read_config_byte(pci_bus, devfn, PCI_SECONDARY_BUS, &secondary_bus);
+
+ sub_bus = (int) secondary_bus;
+
+ next = cpqhp_slot_list[sub_bus];
+
+ while (next != NULL) {
+ rc = cpqhp_save_base_addr_length(ctrl, next);
+ if (rc)
+ return rc;
+
+ next = next->next;
+ }
+ pci_bus->number = func->bus;
+
+ /* FIXME: this loop is duplicated in the non-bridge
+ * case. The two could be rolled together Figure out
+ * IO and memory base lengths
+ */
+ for (cloop = 0x10; cloop <= 0x14; cloop += 4) {
+ temp_register = 0xFFFFFFFF;
+ pci_bus_write_config_dword(pci_bus, devfn, cloop, temp_register);
+ pci_bus_read_config_dword(pci_bus, devfn, cloop, &base);
+ /* If this register is implemented */
+ if (base) {
+ if (base & 0x01L) {
+ /* IO base
+ * set base = amount of IO space
+ * requested
+ */
+ base = base & 0xFFFFFFFE;
+ base = (~base) + 1;
+
+ type = 1;
+ } else {
+ /* memory base */
+ base = base & 0xFFFFFFF0;
+ base = (~base) + 1;
+
+ type = 0;
+ }
+ } else {
+ base = 0x0L;
+ type = 0;
+ }
+
+ /* Save information in slot structure */
+ func->base_length[(cloop - 0x10) >> 2] =
+ base;
+ func->base_type[(cloop - 0x10) >> 2] = type;
+
+ } /* End of base register loop */
+
+ } else if ((header_type & 0x7F) == 0x00) {
+ /* Figure out IO and memory base lengths */
+ for (cloop = 0x10; cloop <= 0x24; cloop += 4) {
+ temp_register = 0xFFFFFFFF;
+ pci_bus_write_config_dword(pci_bus, devfn, cloop, temp_register);
+ pci_bus_read_config_dword(pci_bus, devfn, cloop, &base);
+
+ /* If this register is implemented */
+ if (base) {
+ if (base & 0x01L) {
+ /* IO base
+ * base = amount of IO space
+ * requested
+ */
+ base = base & 0xFFFFFFFE;
+ base = (~base) + 1;
+
+ type = 1;
+ } else {
+ /* memory base
+ * base = amount of memory
+ * space requested
+ */
+ base = base & 0xFFFFFFF0;
+ base = (~base) + 1;
+
+ type = 0;
+ }
+ } else {
+ base = 0x0L;
+ type = 0;
+ }
+
+ /* Save information in slot structure */
+ func->base_length[(cloop - 0x10) >> 2] = base;
+ func->base_type[(cloop - 0x10) >> 2] = type;
+
+ } /* End of base register loop */
+
+ } else { /* Some other unknown header type */
+ }
+
+ /* find the next device in this slot */
+ func = cpqhp_slot_find(func->bus, func->device, index++);
+ }
+
+ return(0);
+}
+
+
+/*
+ * cpqhp_save_used_resources
+ *
+ * Stores used resource information for existing boards. this is
+ * for boards that were in the system when this driver was loaded.
+ * this function is for hot plug ADD
+ *
+ * returns 0 if success
+ */
+int cpqhp_save_used_resources(struct controller *ctrl, struct pci_func *func)
+{
+ u8 cloop;
+ u8 header_type;
+ u8 secondary_bus;
+ u8 temp_byte;
+ u8 b_base;
+ u8 b_length;
+ u16 command;
+ u16 save_command;
+ u16 w_base;
+ u16 w_length;
+ u32 temp_register;
+ u32 save_base;
+ u32 base;
+ int index = 0;
+ struct pci_resource *mem_node;
+ struct pci_resource *p_mem_node;
+ struct pci_resource *io_node;
+ struct pci_resource *bus_node;
+ struct pci_bus *pci_bus = ctrl->pci_bus;
+ unsigned int devfn;
+
+ func = cpqhp_slot_find(func->bus, func->device, index++);
+
+ while ((func != NULL) && func->is_a_board) {
+ pci_bus->number = func->bus;
+ devfn = PCI_DEVFN(func->device, func->function);
+
+ /* Save the command register */
+ pci_bus_read_config_word(pci_bus, devfn, PCI_COMMAND, &save_command);
+
+ /* disable card */
+ command = 0x00;
+ pci_bus_write_config_word(pci_bus, devfn, PCI_COMMAND, command);
+
+ /* Check for Bridge */
+ pci_bus_read_config_byte(pci_bus, devfn, PCI_HEADER_TYPE, &header_type);
+
+ if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
+ /* Clear Bridge Control Register */
+ command = 0x00;
+ pci_bus_write_config_word(pci_bus, devfn, PCI_BRIDGE_CONTROL, command);
+ pci_bus_read_config_byte(pci_bus, devfn, PCI_SECONDARY_BUS, &secondary_bus);
+ pci_bus_read_config_byte(pci_bus, devfn, PCI_SUBORDINATE_BUS, &temp_byte);
+
+ bus_node = kmalloc(sizeof(*bus_node), GFP_KERNEL);
+ if (!bus_node)
+ return -ENOMEM;
+
+ bus_node->base = secondary_bus;
+ bus_node->length = temp_byte - secondary_bus + 1;
+
+ bus_node->next = func->bus_head;
+ func->bus_head = bus_node;
+
+ /* Save IO base and Limit registers */
+ pci_bus_read_config_byte(pci_bus, devfn, PCI_IO_BASE, &b_base);
+ pci_bus_read_config_byte(pci_bus, devfn, PCI_IO_LIMIT, &b_length);
+
+ if ((b_base <= b_length) && (save_command & 0x01)) {
+ io_node = kmalloc(sizeof(*io_node), GFP_KERNEL);
+ if (!io_node)
+ return -ENOMEM;
+
+ io_node->base = (b_base & 0xF0) << 8;
+ io_node->length = (b_length - b_base + 0x10) << 8;
+
+ io_node->next = func->io_head;
+ func->io_head = io_node;
+ }
+
+ /* Save memory base and Limit registers */
+ pci_bus_read_config_word(pci_bus, devfn, PCI_MEMORY_BASE, &w_base);
+ pci_bus_read_config_word(pci_bus, devfn, PCI_MEMORY_LIMIT, &w_length);
+
+ if ((w_base <= w_length) && (save_command & 0x02)) {
+ mem_node = kmalloc(sizeof(*mem_node), GFP_KERNEL);
+ if (!mem_node)
+ return -ENOMEM;
+
+ mem_node->base = w_base << 16;
+ mem_node->length = (w_length - w_base + 0x10) << 16;
+
+ mem_node->next = func->mem_head;
+ func->mem_head = mem_node;
+ }
+
+ /* Save prefetchable memory base and Limit registers */
+ pci_bus_read_config_word(pci_bus, devfn, PCI_PREF_MEMORY_BASE, &w_base);
+ pci_bus_read_config_word(pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, &w_length);
+
+ if ((w_base <= w_length) && (save_command & 0x02)) {
+ p_mem_node = kmalloc(sizeof(*p_mem_node), GFP_KERNEL);
+ if (!p_mem_node)
+ return -ENOMEM;
+
+ p_mem_node->base = w_base << 16;
+ p_mem_node->length = (w_length - w_base + 0x10) << 16;
+
+ p_mem_node->next = func->p_mem_head;
+ func->p_mem_head = p_mem_node;
+ }
+ /* Figure out IO and memory base lengths */
+ for (cloop = 0x10; cloop <= 0x14; cloop += 4) {
+ pci_bus_read_config_dword(pci_bus, devfn, cloop, &save_base);
+
+ temp_register = 0xFFFFFFFF;
+ pci_bus_write_config_dword(pci_bus, devfn, cloop, temp_register);
+ pci_bus_read_config_dword(pci_bus, devfn, cloop, &base);
+
+ temp_register = base;
+
+ /* If this register is implemented */
+ if (base) {
+ if (((base & 0x03L) == 0x01)
+ && (save_command & 0x01)) {
+ /* IO base
+ * set temp_register = amount
+ * of IO space requested
+ */
+ temp_register = base & 0xFFFFFFFE;
+ temp_register = (~temp_register) + 1;
+
+ io_node = kmalloc(sizeof(*io_node),
+ GFP_KERNEL);
+ if (!io_node)
+ return -ENOMEM;
+
+ io_node->base =
+ save_base & (~0x03L);
+ io_node->length = temp_register;
+
+ io_node->next = func->io_head;
+ func->io_head = io_node;
+ } else
+ if (((base & 0x0BL) == 0x08)
+ && (save_command & 0x02)) {
+ /* prefetchable memory base */
+ temp_register = base & 0xFFFFFFF0;
+ temp_register = (~temp_register) + 1;
+
+ p_mem_node = kmalloc(sizeof(*p_mem_node),
+ GFP_KERNEL);
+ if (!p_mem_node)
+ return -ENOMEM;
+
+ p_mem_node->base = save_base & (~0x0FL);
+ p_mem_node->length = temp_register;
+
+ p_mem_node->next = func->p_mem_head;
+ func->p_mem_head = p_mem_node;
+ } else
+ if (((base & 0x0BL) == 0x00)
+ && (save_command & 0x02)) {
+ /* prefetchable memory base */
+ temp_register = base & 0xFFFFFFF0;
+ temp_register = (~temp_register) + 1;
+
+ mem_node = kmalloc(sizeof(*mem_node),
+ GFP_KERNEL);
+ if (!mem_node)
+ return -ENOMEM;
+
+ mem_node->base = save_base & (~0x0FL);
+ mem_node->length = temp_register;
+
+ mem_node->next = func->mem_head;
+ func->mem_head = mem_node;
+ } else
+ return(1);
+ }
+ } /* End of base register loop */
+ /* Standard header */
+ } else if ((header_type & 0x7F) == 0x00) {
+ /* Figure out IO and memory base lengths */
+ for (cloop = 0x10; cloop <= 0x24; cloop += 4) {
+ pci_bus_read_config_dword(pci_bus, devfn, cloop, &save_base);
+
+ temp_register = 0xFFFFFFFF;
+ pci_bus_write_config_dword(pci_bus, devfn, cloop, temp_register);
+ pci_bus_read_config_dword(pci_bus, devfn, cloop, &base);
+
+ temp_register = base;
+
+ /* If this register is implemented */
+ if (base) {
+ if (((base & 0x03L) == 0x01)
+ && (save_command & 0x01)) {
+ /* IO base
+ * set temp_register = amount
+ * of IO space requested
+ */
+ temp_register = base & 0xFFFFFFFE;
+ temp_register = (~temp_register) + 1;
+
+ io_node = kmalloc(sizeof(*io_node),
+ GFP_KERNEL);
+ if (!io_node)
+ return -ENOMEM;
+
+ io_node->base = save_base & (~0x01L);
+ io_node->length = temp_register;
+
+ io_node->next = func->io_head;
+ func->io_head = io_node;
+ } else
+ if (((base & 0x0BL) == 0x08)
+ && (save_command & 0x02)) {
+ /* prefetchable memory base */
+ temp_register = base & 0xFFFFFFF0;
+ temp_register = (~temp_register) + 1;
+
+ p_mem_node = kmalloc(sizeof(*p_mem_node),
+ GFP_KERNEL);
+ if (!p_mem_node)
+ return -ENOMEM;
+
+ p_mem_node->base = save_base & (~0x0FL);
+ p_mem_node->length = temp_register;
+
+ p_mem_node->next = func->p_mem_head;
+ func->p_mem_head = p_mem_node;
+ } else
+ if (((base & 0x0BL) == 0x00)
+ && (save_command & 0x02)) {
+ /* prefetchable memory base */
+ temp_register = base & 0xFFFFFFF0;
+ temp_register = (~temp_register) + 1;
+
+ mem_node = kmalloc(sizeof(*mem_node),
+ GFP_KERNEL);
+ if (!mem_node)
+ return -ENOMEM;
+
+ mem_node->base = save_base & (~0x0FL);
+ mem_node->length = temp_register;
+
+ mem_node->next = func->mem_head;
+ func->mem_head = mem_node;
+ } else
+ return(1);
+ }
+ } /* End of base register loop */
+ }
+
+ /* find the next device in this slot */
+ func = cpqhp_slot_find(func->bus, func->device, index++);
+ }
+
+ return 0;
+}
+
+
+/*
+ * cpqhp_configure_board
+ *
+ * Copies saved configuration information to one slot.
+ * this is called recursively for bridge devices.
+ * this is for hot plug REPLACE!
+ *
+ * returns 0 if success
+ */
+int cpqhp_configure_board(struct controller *ctrl, struct pci_func *func)
+{
+ int cloop;
+ u8 header_type;
+ u8 secondary_bus;
+ int sub_bus;
+ struct pci_func *next;
+ u32 temp;
+ u32 rc;
+ int index = 0;
+ struct pci_bus *pci_bus = ctrl->pci_bus;
+ unsigned int devfn;
+
+ func = cpqhp_slot_find(func->bus, func->device, index++);
+
+ while (func != NULL) {
+ pci_bus->number = func->bus;
+ devfn = PCI_DEVFN(func->device, func->function);
+
+ /* Start at the top of config space so that the control
+ * registers are programmed last
+ */
+ for (cloop = 0x3C; cloop > 0; cloop -= 4)
+ pci_bus_write_config_dword(pci_bus, devfn, cloop, func->config_space[cloop >> 2]);
+
+ pci_bus_read_config_byte(pci_bus, devfn, PCI_HEADER_TYPE, &header_type);
+
+ /* If this is a bridge device, restore subordinate devices */
+ if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
+ pci_bus_read_config_byte(pci_bus, devfn, PCI_SECONDARY_BUS, &secondary_bus);
+
+ sub_bus = (int) secondary_bus;
+
+ next = cpqhp_slot_list[sub_bus];
+
+ while (next != NULL) {
+ rc = cpqhp_configure_board(ctrl, next);
+ if (rc)
+ return rc;
+
+ next = next->next;
+ }
+ } else {
+
+ /* Check all the base Address Registers to make sure
+ * they are the same. If not, the board is different.
+ */
+
+ for (cloop = 16; cloop < 40; cloop += 4) {
+ pci_bus_read_config_dword(pci_bus, devfn, cloop, &temp);
+
+ if (temp != func->config_space[cloop >> 2]) {
+ dbg("Config space compare failure!!! offset = %x\n", cloop);
+ dbg("bus = %x, device = %x, function = %x\n", func->bus, func->device, func->function);
+ dbg("temp = %x, config space = %x\n\n", temp, func->config_space[cloop >> 2]);
+ return 1;
+ }
+ }
+ }
+
+ func->configured = 1;
+
+ func = cpqhp_slot_find(func->bus, func->device, index++);
+ }
+
+ return 0;
+}
+
+
+/*
+ * cpqhp_valid_replace
+ *
+ * this function checks to see if a board is the same as the
+ * one it is replacing. this check will detect if the device's
+ * vendor or device id's are the same
+ *
+ * returns 0 if the board is the same nonzero otherwise
+ */
+int cpqhp_valid_replace(struct controller *ctrl, struct pci_func *func)
+{
+ u8 cloop;
+ u8 header_type;
+ u8 secondary_bus;
+ u8 type;
+ u32 temp_register = 0;
+ u32 base;
+ u32 rc;
+ struct pci_func *next;
+ int index = 0;
+ struct pci_bus *pci_bus = ctrl->pci_bus;
+ unsigned int devfn;
+
+ if (!func->is_a_board)
+ return(ADD_NOT_SUPPORTED);
+
+ func = cpqhp_slot_find(func->bus, func->device, index++);
+
+ while (func != NULL) {
+ pci_bus->number = func->bus;
+ devfn = PCI_DEVFN(func->device, func->function);
+
+ pci_bus_read_config_dword(pci_bus, devfn, PCI_VENDOR_ID, &temp_register);
+
+ /* No adapter present */
+ if (temp_register == 0xFFFFFFFF)
+ return(NO_ADAPTER_PRESENT);
+
+ if (temp_register != func->config_space[0])
+ return(ADAPTER_NOT_SAME);
+
+ /* Check for same revision number and class code */
+ pci_bus_read_config_dword(pci_bus, devfn, PCI_CLASS_REVISION, &temp_register);
+
+ /* Adapter not the same */
+ if (temp_register != func->config_space[0x08 >> 2])
+ return(ADAPTER_NOT_SAME);
+
+ /* Check for Bridge */
+ pci_bus_read_config_byte(pci_bus, devfn, PCI_HEADER_TYPE, &header_type);
+
+ if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
+ /* In order to continue checking, we must program the
+ * bus registers in the bridge to respond to accesses
+ * for its subordinate bus(es)
+ */
+
+ temp_register = func->config_space[0x18 >> 2];
+ pci_bus_write_config_dword(pci_bus, devfn, PCI_PRIMARY_BUS, temp_register);
+
+ secondary_bus = (temp_register >> 8) & 0xFF;
+
+ next = cpqhp_slot_list[secondary_bus];
+
+ while (next != NULL) {
+ rc = cpqhp_valid_replace(ctrl, next);
+ if (rc)
+ return rc;
+
+ next = next->next;
+ }
+
+ }
+ /* Check to see if it is a standard config header */
+ else if ((header_type & 0x7F) == PCI_HEADER_TYPE_NORMAL) {
+ /* Check subsystem vendor and ID */
+ pci_bus_read_config_dword(pci_bus, devfn, PCI_SUBSYSTEM_VENDOR_ID, &temp_register);
+
+ if (temp_register != func->config_space[0x2C >> 2]) {
+ /* If it's a SMART-2 and the register isn't
+ * filled in, ignore the difference because
+ * they just have an old rev of the firmware
+ */
+ if (!((func->config_space[0] == 0xAE100E11)
+ && (temp_register == 0x00L)))
+ return(ADAPTER_NOT_SAME);
+ }
+ /* Figure out IO and memory base lengths */
+ for (cloop = 0x10; cloop <= 0x24; cloop += 4) {
+ temp_register = 0xFFFFFFFF;
+ pci_bus_write_config_dword(pci_bus, devfn, cloop, temp_register);
+ pci_bus_read_config_dword(pci_bus, devfn, cloop, &base);
+
+ /* If this register is implemented */
+ if (base) {
+ if (base & 0x01L) {
+ /* IO base
+ * set base = amount of IO
+ * space requested
+ */
+ base = base & 0xFFFFFFFE;
+ base = (~base) + 1;
+
+ type = 1;
+ } else {
+ /* memory base */
+ base = base & 0xFFFFFFF0;
+ base = (~base) + 1;
+
+ type = 0;
+ }
+ } else {
+ base = 0x0L;
+ type = 0;
+ }
+
+ /* Check information in slot structure */
+ if (func->base_length[(cloop - 0x10) >> 2] != base)
+ return(ADAPTER_NOT_SAME);
+
+ if (func->base_type[(cloop - 0x10) >> 2] != type)
+ return(ADAPTER_NOT_SAME);
+
+ } /* End of base register loop */
+
+ } /* End of (type 0 config space) else */
+ else {
+ /* this is not a type 0 or 1 config space header so
+ * we don't know how to do it
+ */
+ return(DEVICE_TYPE_NOT_SUPPORTED);
+ }
+
+ /* Get the next function */
+ func = cpqhp_slot_find(func->bus, func->device, index++);
+ }
+
+
+ return 0;
+}
+
+
+/*
+ * cpqhp_find_available_resources
+ *
+ * Finds available memory, IO, and IRQ resources for programming
+ * devices which may be added to the system
+ * this function is for hot plug ADD!
+ *
+ * returns 0 if success
+ */
+int cpqhp_find_available_resources(struct controller *ctrl, void __iomem *rom_start)
+{
+ u8 temp;
+ u8 populated_slot;
+ u8 bridged_slot;
+ void __iomem *one_slot;
+ void __iomem *rom_resource_table;
+ struct pci_func *func = NULL;
+ int i = 10, index;
+ u32 temp_dword, rc;
+ struct pci_resource *mem_node;
+ struct pci_resource *p_mem_node;
+ struct pci_resource *io_node;
+ struct pci_resource *bus_node;
+
+ rom_resource_table = detect_HRT_floating_pointer(rom_start, rom_start+0xffff);
+ dbg("rom_resource_table = %p\n", rom_resource_table);
+
+ if (rom_resource_table == NULL)
+ return -ENODEV;
+
+ /* Sum all resources and setup resource maps */
+ unused_IRQ = readl(rom_resource_table + UNUSED_IRQ);
+ dbg("unused_IRQ = %x\n", unused_IRQ);
+
+ temp = 0;
+ while (unused_IRQ) {
+ if (unused_IRQ & 1) {
+ cpqhp_disk_irq = temp;
+ break;
+ }
+ unused_IRQ = unused_IRQ >> 1;
+ temp++;
+ }
+
+ dbg("cpqhp_disk_irq= %d\n", cpqhp_disk_irq);
+ unused_IRQ = unused_IRQ >> 1;
+ temp++;
+
+ while (unused_IRQ) {
+ if (unused_IRQ & 1) {
+ cpqhp_nic_irq = temp;
+ break;
+ }
+ unused_IRQ = unused_IRQ >> 1;
+ temp++;
+ }
+
+ dbg("cpqhp_nic_irq= %d\n", cpqhp_nic_irq);
+ unused_IRQ = readl(rom_resource_table + PCIIRQ);
+
+ temp = 0;
+
+ if (!cpqhp_nic_irq)
+ cpqhp_nic_irq = ctrl->cfgspc_irq;
+
+ if (!cpqhp_disk_irq)
+ cpqhp_disk_irq = ctrl->cfgspc_irq;
+
+ dbg("cpqhp_disk_irq, cpqhp_nic_irq= %d, %d\n", cpqhp_disk_irq, cpqhp_nic_irq);
+
+ rc = compaq_nvram_load(rom_start, ctrl);
+ if (rc)
+ return rc;
+
+ one_slot = rom_resource_table + sizeof(struct hrt);
+
+ i = readb(rom_resource_table + NUMBER_OF_ENTRIES);
+ dbg("number_of_entries = %d\n", i);
+
+ if (!readb(one_slot + SECONDARY_BUS))
+ return 1;
+
+ dbg("dev|IO base|length|Mem base|length|Pre base|length|PB SB MB\n");
+
+ while (i && readb(one_slot + SECONDARY_BUS)) {
+ u8 dev_func = readb(one_slot + DEV_FUNC);
+ u8 primary_bus = readb(one_slot + PRIMARY_BUS);
+ u8 secondary_bus = readb(one_slot + SECONDARY_BUS);
+ u8 max_bus = readb(one_slot + MAX_BUS);
+ u16 io_base = readw(one_slot + IO_BASE);
+ u16 io_length = readw(one_slot + IO_LENGTH);
+ u16 mem_base = readw(one_slot + MEM_BASE);
+ u16 mem_length = readw(one_slot + MEM_LENGTH);
+ u16 pre_mem_base = readw(one_slot + PRE_MEM_BASE);
+ u16 pre_mem_length = readw(one_slot + PRE_MEM_LENGTH);
+
+ dbg("%2.2x | %4.4x | %4.4x | %4.4x | %4.4x | %4.4x | %4.4x |%2.2x %2.2x %2.2x\n",
+ dev_func, io_base, io_length, mem_base, mem_length, pre_mem_base, pre_mem_length,
+ primary_bus, secondary_bus, max_bus);
+
+ /* If this entry isn't for our controller's bus, ignore it */
+ if (primary_bus != ctrl->bus) {
+ i--;
+ one_slot += sizeof(struct slot_rt);
+ continue;
+ }
+ /* find out if this entry is for an occupied slot */
+ ctrl->pci_bus->number = primary_bus;
+ pci_bus_read_config_dword(ctrl->pci_bus, dev_func, PCI_VENDOR_ID, &temp_dword);
+ dbg("temp_D_word = %x\n", temp_dword);
+
+ if (temp_dword != 0xFFFFFFFF) {
+ index = 0;
+ func = cpqhp_slot_find(primary_bus, dev_func >> 3, 0);
+
+ while (func && (func->function != (dev_func & 0x07))) {
+ dbg("func = %p (bus, dev, fun) = (%d, %d, %d)\n", func, primary_bus, dev_func >> 3, index);
+ func = cpqhp_slot_find(primary_bus, dev_func >> 3, index++);
+ }
+
+ /* If we can't find a match, skip this table entry */
+ if (!func) {
+ i--;
+ one_slot += sizeof(struct slot_rt);
+ continue;
+ }
+ /* this may not work and shouldn't be used */
+ if (secondary_bus != primary_bus)
+ bridged_slot = 1;
+ else
+ bridged_slot = 0;
+
+ populated_slot = 1;
+ } else {
+ populated_slot = 0;
+ bridged_slot = 0;
+ }
+
+
+ /* If we've got a valid IO base, use it */
+
+ temp_dword = io_base + io_length;
+
+ if ((io_base) && (temp_dword < 0x10000)) {
+ io_node = kmalloc(sizeof(*io_node), GFP_KERNEL);
+ if (!io_node)
+ return -ENOMEM;
+
+ io_node->base = io_base;
+ io_node->length = io_length;
+
+ dbg("found io_node(base, length) = %x, %x\n",
+ io_node->base, io_node->length);
+ dbg("populated slot =%d \n", populated_slot);
+ if (!populated_slot) {
+ io_node->next = ctrl->io_head;
+ ctrl->io_head = io_node;
+ } else {
+ io_node->next = func->io_head;
+ func->io_head = io_node;
+ }
+ }
+
+ /* If we've got a valid memory base, use it */
+ temp_dword = mem_base + mem_length;
+ if ((mem_base) && (temp_dword < 0x10000)) {
+ mem_node = kmalloc(sizeof(*mem_node), GFP_KERNEL);
+ if (!mem_node)
+ return -ENOMEM;
+
+ mem_node->base = mem_base << 16;
+
+ mem_node->length = mem_length << 16;
+
+ dbg("found mem_node(base, length) = %x, %x\n",
+ mem_node->base, mem_node->length);
+ dbg("populated slot =%d \n", populated_slot);
+ if (!populated_slot) {
+ mem_node->next = ctrl->mem_head;
+ ctrl->mem_head = mem_node;
+ } else {
+ mem_node->next = func->mem_head;
+ func->mem_head = mem_node;
+ }
+ }
+
+ /* If we've got a valid prefetchable memory base, and
+ * the base + length isn't greater than 0xFFFF
+ */
+ temp_dword = pre_mem_base + pre_mem_length;
+ if ((pre_mem_base) && (temp_dword < 0x10000)) {
+ p_mem_node = kmalloc(sizeof(*p_mem_node), GFP_KERNEL);
+ if (!p_mem_node)
+ return -ENOMEM;
+
+ p_mem_node->base = pre_mem_base << 16;
+
+ p_mem_node->length = pre_mem_length << 16;
+ dbg("found p_mem_node(base, length) = %x, %x\n",
+ p_mem_node->base, p_mem_node->length);
+ dbg("populated slot =%d \n", populated_slot);
+
+ if (!populated_slot) {
+ p_mem_node->next = ctrl->p_mem_head;
+ ctrl->p_mem_head = p_mem_node;
+ } else {
+ p_mem_node->next = func->p_mem_head;
+ func->p_mem_head = p_mem_node;
+ }
+ }
+
+ /* If we've got a valid bus number, use it
+ * The second condition is to ignore bus numbers on
+ * populated slots that don't have PCI-PCI bridges
+ */
+ if (secondary_bus && (secondary_bus != primary_bus)) {
+ bus_node = kmalloc(sizeof(*bus_node), GFP_KERNEL);
+ if (!bus_node)
+ return -ENOMEM;
+
+ bus_node->base = secondary_bus;
+ bus_node->length = max_bus - secondary_bus + 1;
+ dbg("found bus_node(base, length) = %x, %x\n",
+ bus_node->base, bus_node->length);
+ dbg("populated slot =%d \n", populated_slot);
+ if (!populated_slot) {
+ bus_node->next = ctrl->bus_head;
+ ctrl->bus_head = bus_node;
+ } else {
+ bus_node->next = func->bus_head;
+ func->bus_head = bus_node;
+ }
+ }
+
+ i--;
+ one_slot += sizeof(struct slot_rt);
+ }
+
+ /* If all of the following fail, we don't have any resources for
+ * hot plug add
+ */
+ rc = 1;
+ rc &= cpqhp_resource_sort_and_combine(&(ctrl->mem_head));
+ rc &= cpqhp_resource_sort_and_combine(&(ctrl->p_mem_head));
+ rc &= cpqhp_resource_sort_and_combine(&(ctrl->io_head));
+ rc &= cpqhp_resource_sort_and_combine(&(ctrl->bus_head));
+
+ return rc;
+}
+
+
+/*
+ * cpqhp_return_board_resources
+ *
+ * this routine returns all resources allocated to a board to
+ * the available pool.
+ *
+ * returns 0 if success
+ */
+int cpqhp_return_board_resources(struct pci_func *func, struct resource_lists *resources)
+{
+ int rc = 0;
+ struct pci_resource *node;
+ struct pci_resource *t_node;
+ dbg("%s\n", __func__);
+
+ if (!func)
+ return 1;
+
+ node = func->io_head;
+ func->io_head = NULL;
+ while (node) {
+ t_node = node->next;
+ return_resource(&(resources->io_head), node);
+ node = t_node;
+ }
+
+ node = func->mem_head;
+ func->mem_head = NULL;
+ while (node) {
+ t_node = node->next;
+ return_resource(&(resources->mem_head), node);
+ node = t_node;
+ }
+
+ node = func->p_mem_head;
+ func->p_mem_head = NULL;
+ while (node) {
+ t_node = node->next;
+ return_resource(&(resources->p_mem_head), node);
+ node = t_node;
+ }
+
+ node = func->bus_head;
+ func->bus_head = NULL;
+ while (node) {
+ t_node = node->next;
+ return_resource(&(resources->bus_head), node);
+ node = t_node;
+ }
+
+ rc |= cpqhp_resource_sort_and_combine(&(resources->mem_head));
+ rc |= cpqhp_resource_sort_and_combine(&(resources->p_mem_head));
+ rc |= cpqhp_resource_sort_and_combine(&(resources->io_head));
+ rc |= cpqhp_resource_sort_and_combine(&(resources->bus_head));
+
+ return rc;
+}
+
+
+/*
+ * cpqhp_destroy_resource_list
+ *
+ * Puts node back in the resource list pointed to by head
+ */
+void cpqhp_destroy_resource_list(struct resource_lists *resources)
+{
+ struct pci_resource *res, *tres;
+
+ res = resources->io_head;
+ resources->io_head = NULL;
+
+ while (res) {
+ tres = res;
+ res = res->next;
+ kfree(tres);
+ }
+
+ res = resources->mem_head;
+ resources->mem_head = NULL;
+
+ while (res) {
+ tres = res;
+ res = res->next;
+ kfree(tres);
+ }
+
+ res = resources->p_mem_head;
+ resources->p_mem_head = NULL;
+
+ while (res) {
+ tres = res;
+ res = res->next;
+ kfree(tres);
+ }
+
+ res = resources->bus_head;
+ resources->bus_head = NULL;
+
+ while (res) {
+ tres = res;
+ res = res->next;
+ kfree(tres);
+ }
+}
+
+
+/*
+ * cpqhp_destroy_board_resources
+ *
+ * Puts node back in the resource list pointed to by head
+ */
+void cpqhp_destroy_board_resources(struct pci_func *func)
+{
+ struct pci_resource *res, *tres;
+
+ res = func->io_head;
+ func->io_head = NULL;
+
+ while (res) {
+ tres = res;
+ res = res->next;
+ kfree(tres);
+ }
+
+ res = func->mem_head;
+ func->mem_head = NULL;
+
+ while (res) {
+ tres = res;
+ res = res->next;
+ kfree(tres);
+ }
+
+ res = func->p_mem_head;
+ func->p_mem_head = NULL;
+
+ while (res) {
+ tres = res;
+ res = res->next;
+ kfree(tres);
+ }
+
+ res = func->bus_head;
+ func->bus_head = NULL;
+
+ while (res) {
+ tres = res;
+ res = res->next;
+ kfree(tres);
+ }
+}