diff options
Diffstat (limited to 'drivers/pcmcia/Kconfig')
| -rw-r--r-- | drivers/pcmcia/Kconfig | 256 |
1 files changed, 256 insertions, 0 deletions
diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig new file mode 100644 index 0000000000..dddb235dd0 --- /dev/null +++ b/drivers/pcmcia/Kconfig @@ -0,0 +1,256 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# PCCARD (PCMCIA/CardBus) bus subsystem configuration +# + +menuconfig PCCARD + tristate "PCCard (PCMCIA/CardBus) support" + help + Say Y here if you want to attach PCMCIA- or PC-cards to your Linux + computer. These are credit-card size devices such as network cards, + modems or hard drives often used with laptops computers. There are + actually two varieties of these cards: 16 bit PCMCIA and 32 bit + CardBus cards. + + To compile this driver as modules, choose M here: the + module will be called pcmcia_core. + +if PCCARD + +config PCMCIA + tristate "16-bit PCMCIA support" + depends on HAS_IOMEM + select CRC32 + default y + help + This option enables support for 16-bit PCMCIA cards. Most older + PC-cards are such 16-bit PCMCIA cards, so unless you know you're + only using 32-bit CardBus cards, say Y or M here. + + To use 16-bit PCMCIA cards, you will need supporting software in + most cases. (see the file <file:Documentation/Changes> for + location and details). + + To compile this driver as modules, choose M here: the + module will be called pcmcia. + + If unsure, say Y. + +config PCMCIA_LOAD_CIS + bool "Load CIS updates from userspace" + depends on PCMCIA + select FW_LOADER + default y + help + Some PCMCIA cards require an updated Card Information Structure (CIS) + to be loaded from userspace to work correctly. If you say Y here, + and your userspace is arranged correctly, this will be loaded + automatically using the in-kernel firmware loader and the hotplug + subsystem, instead of relying on cardmgr from pcmcia-cs to do so. + + If unsure, say Y. + +config CARDBUS + bool "32-bit CardBus support" + depends on PCI + default y + help + CardBus is a bus mastering architecture for PC-cards, which allows + for 32 bit PC-cards (the original PCMCIA standard specifies only + a 16 bit wide bus). Many newer PC-cards are actually CardBus cards. + + To use 32 bit PC-cards, you also need a CardBus compatible host + bridge. Virtually all modern PCMCIA bridges do this, and most of + them are "yenta-compatible", so say Y or M there, too. + + If unsure, say Y. + +config PCMCIA_MAX1600 + tristate + +comment "PC-card bridges" + +config YENTA + tristate "CardBus yenta-compatible bridge support" + depends on PCI + select CARDBUS if !EXPERT + select PCCARD_NONSTATIC if PCMCIA != n + help + This option enables support for CardBus host bridges. Virtually + all modern PCMCIA bridges are CardBus compatible. A "bridge" is + the hardware inside your computer that PCMCIA cards are plugged + into. + + To compile this driver as modules, choose M here: the + module will be called yenta_socket. + + If unsure, say Y. + +config YENTA_O2 + default y + bool "Special initialization for O2Micro bridges" if EXPERT + depends on YENTA + +config YENTA_RICOH + default y + bool "Special initialization for Ricoh bridges" if EXPERT + depends on YENTA + +config YENTA_TI + default y + bool "Special initialization for TI and EnE bridges" if EXPERT + depends on YENTA + +config YENTA_ENE_TUNE + default y + bool "Auto-tune EnE bridges for CB cards" if EXPERT + depends on YENTA_TI && CARDBUS + +config YENTA_TOSHIBA + default y + bool "Special initialization for Toshiba ToPIC bridges" if EXPERT + depends on YENTA + +config PD6729 + tristate "Cirrus PD6729 compatible bridge support" + depends on PCMCIA && PCI && HAS_IOPORT + select PCCARD_NONSTATIC + help + This provides support for the Cirrus PD6729 PCI-to-PCMCIA bridge + device, found in some older laptops and PCMCIA card readers. + +config I82092 + tristate "i82092 compatible bridge support" + depends on PCMCIA && PCI && HAS_IOPORT + select PCCARD_NONSTATIC + help + This provides support for the Intel I82092AA PCI-to-PCMCIA bridge device, + found in some older laptops and more commonly in evaluation boards for the + chip. + +config I82365 + tristate "i82365 compatible bridge support" + depends on PCMCIA && ISA + select PCCARD_NONSTATIC + help + Say Y here to include support for ISA-bus PCMCIA host bridges that + are register compatible with the Intel i82365. These are found on + older laptops and ISA-bus card readers for desktop systems. A + "bridge" is the hardware inside your computer that PCMCIA cards are + plugged into. If unsure, say N. + +config TCIC + tristate "Databook TCIC host bridge support" + depends on PCMCIA && ISA + select PCCARD_NONSTATIC + help + Say Y here to include support for the Databook TCIC family of PCMCIA + host bridges. These are only found on a handful of old systems. + "Bridge" is the name used for the hardware inside your computer that + PCMCIA cards are plugged into. If unsure, say N. + +config PCMCIA_ALCHEMY_DEVBOARD + tristate "Alchemy Db/Pb1xxx PCMCIA socket services" + depends on MIPS_DB1XXX && PCMCIA + help + Enable this driver of you want PCMCIA support on your Alchemy + Db1000, Db/Pb1100, Db/Pb1500, Db/Pb1550, Db/Pb1200, DB1300 + board. NOT suitable for the PB1000! + + This driver is also available as a module called db1xxx_ss.ko + +config PCMCIA_XXS1500 + tristate "MyCable XXS1500 PCMCIA socket support" + depends on PCMCIA && MIPS_XXS1500 + help + Support for the PCMCIA/CF socket interface on MyCable XXS1500 + systems. + + This driver is also available as a module called xxs1500_ss.ko + +config PCMCIA_BCM63XX + tristate "bcm63xx pcmcia support" + depends on BCM63XX && PCMCIA + +config PCMCIA_SOC_COMMON + tristate + +config PCMCIA_SA11XX_BASE + tristate + +config PCMCIA_SA1100 + tristate "SA1100 support" + depends on ARM && ARCH_SA1100 && PCMCIA + select PCMCIA_SOC_COMMON + select PCMCIA_SA11XX_BASE + help + Say Y here to include support for SA11x0-based PCMCIA or CF + sockets, found on HP iPAQs, Yopy, and other StrongARM(R)/ + Xscale(R) embedded machines. + + This driver is also available as a module called sa1100_cs. + +config PCMCIA_SA1111 + tristate "SA1111 support" + depends on ARM && SA1111 && PCMCIA + select PCMCIA_SOC_COMMON + select PCMCIA_SA11XX_BASE + select PCMCIA_MAX1600 if ASSABET_NEPONSET + help + Say Y here to include support for SA1111-based PCMCIA or CF + sockets, found on the Jornada 720, Graphicsmaster and other + StrongARM(R)/Xscale(R) embedded machines. + + This driver is also available as a module called sa1111_cs. + +config PCMCIA_PXA2XX + tristate "PXA2xx support" + depends on ARM && ARCH_PXA && PCMCIA && PXA_SHARPSL + select PCMCIA_SOC_COMMON + help + Say Y here to include support for the PXA2xx PCMCIA controller + +config PCMCIA_DEBUG + bool "Enable debugging" + depends on (PCMCIA_SA1111 || PCMCIA_SA1100 || PCMCIA_PXA2XX) + help + Say Y here to enable debugging for the SoC PCMCIA layer. + You will need to choose the debugging level either via the + kernel command line, or module options depending whether + you build the drivers as modules. + + The kernel command line options are: + sa11xx_core.pc_debug=N + pxa2xx_core.pc_debug=N + + The module option is called pc_debug=N + + In all the above examples, N is the debugging verbosity + level. + +config PCMCIA_PROBE + bool + default y if ISA && !ARCH_SA1100 && !PARISC + +config OMAP_CF + tristate "OMAP CompactFlash Controller" + depends on PCMCIA + depends on ARCH_OMAP16XX || (ARM && COMPILE_TEST) + help + Say Y here to support the CompactFlash controller on OMAP. + Note that this doesn't support "True IDE" mode. + +config ELECTRA_CF + tristate "Electra CompactFlash Controller" + depends on PCMCIA && PPC_PASEMI + help + Say Y here to support the CompactFlash controller on the + PA Semi Electra eval board. + +config PCCARD_NONSTATIC + bool + +config PCCARD_IODYN + bool + +endif # PCCARD |