diff options
Diffstat (limited to 'drivers/pcmcia/pcmcia_cis.c')
| -rw-r--r-- | drivers/pcmcia/pcmcia_cis.c | 434 |
1 files changed, 434 insertions, 0 deletions
diff --git a/drivers/pcmcia/pcmcia_cis.c b/drivers/pcmcia/pcmcia_cis.c new file mode 100644 index 0000000000..6bc0bc24d3 --- /dev/null +++ b/drivers/pcmcia/pcmcia_cis.c @@ -0,0 +1,434 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * PCMCIA high-level CIS access functions + * + * The initial developer of the original code is David A. Hinds + * <dahinds@users.sourceforge.net>. Portions created by David A. Hinds + * are Copyright (C) 1999 David A. Hinds. All Rights Reserved. + * + * Copyright (C) 1999 David A. Hinds + * Copyright (C) 2004-2010 Dominik Brodowski + */ + +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> + +#include <pcmcia/cisreg.h> +#include <pcmcia/cistpl.h> +#include <pcmcia/ss.h> +#include <pcmcia/ds.h> +#include "cs_internal.h" + + +/** + * pccard_read_tuple() - internal CIS tuple access + * @s: the struct pcmcia_socket where the card is inserted + * @function: the device function we loop for + * @code: which CIS code shall we look for? + * @parse: buffer where the tuple shall be parsed (or NULL, if no parse) + * + * pccard_read_tuple() reads out one tuple and attempts to parse it + */ +int pccard_read_tuple(struct pcmcia_socket *s, unsigned int function, + cisdata_t code, void *parse) +{ + tuple_t tuple; + cisdata_t *buf; + int ret; + + buf = kmalloc(256, GFP_KERNEL); + if (buf == NULL) { + dev_warn(&s->dev, "no memory to read tuple\n"); + return -ENOMEM; + } + tuple.DesiredTuple = code; + tuple.Attributes = 0; + if (function == BIND_FN_ALL) + tuple.Attributes = TUPLE_RETURN_COMMON; + ret = pccard_get_first_tuple(s, function, &tuple); + if (ret != 0) + goto done; + tuple.TupleData = buf; + tuple.TupleOffset = 0; + tuple.TupleDataMax = 255; + ret = pccard_get_tuple_data(s, &tuple); + if (ret != 0) + goto done; + ret = pcmcia_parse_tuple(&tuple, parse); +done: + kfree(buf); + return ret; +} + + +/** + * pccard_loop_tuple() - loop over tuples in the CIS + * @s: the struct pcmcia_socket where the card is inserted + * @function: the device function we loop for + * @code: which CIS code shall we look for? + * @parse: buffer where the tuple shall be parsed (or NULL, if no parse) + * @priv_data: private data to be passed to the loop_tuple function. + * @loop_tuple: function to call for each CIS entry of type @function. IT + * gets passed the raw tuple, the paresed tuple (if @parse is + * set) and @priv_data. + * + * pccard_loop_tuple() loops over all CIS entries of type @function, and + * calls the @loop_tuple function for each entry. If the call to @loop_tuple + * returns 0, the loop exits. Returns 0 on success or errorcode otherwise. + */ +static int pccard_loop_tuple(struct pcmcia_socket *s, unsigned int function, + cisdata_t code, cisparse_t *parse, void *priv_data, + int (*loop_tuple) (tuple_t *tuple, + cisparse_t *parse, + void *priv_data)) +{ + tuple_t tuple; + cisdata_t *buf; + int ret; + + buf = kzalloc(256, GFP_KERNEL); + if (buf == NULL) { + dev_warn(&s->dev, "no memory to read tuple\n"); + return -ENOMEM; + } + + tuple.TupleData = buf; + tuple.TupleDataMax = 255; + tuple.TupleOffset = 0; + tuple.DesiredTuple = code; + tuple.Attributes = 0; + + ret = pccard_get_first_tuple(s, function, &tuple); + while (!ret) { + if (pccard_get_tuple_data(s, &tuple)) + goto next_entry; + + if (parse) + if (pcmcia_parse_tuple(&tuple, parse)) + goto next_entry; + + ret = loop_tuple(&tuple, parse, priv_data); + if (!ret) + break; + +next_entry: + ret = pccard_get_next_tuple(s, function, &tuple); + } + + kfree(buf); + return ret; +} + + +/* + * pcmcia_io_cfg_data_width() - convert cfgtable to data path width parameter + */ +static int pcmcia_io_cfg_data_width(unsigned int flags) +{ + if (!(flags & CISTPL_IO_8BIT)) + return IO_DATA_PATH_WIDTH_16; + if (!(flags & CISTPL_IO_16BIT)) + return IO_DATA_PATH_WIDTH_8; + return IO_DATA_PATH_WIDTH_AUTO; +} + + +struct pcmcia_cfg_mem { + struct pcmcia_device *p_dev; + int (*conf_check) (struct pcmcia_device *p_dev, void *priv_data); + void *priv_data; + cisparse_t parse; + cistpl_cftable_entry_t dflt; +}; + +/* + * pcmcia_do_loop_config() - internal helper for pcmcia_loop_config() + * + * pcmcia_do_loop_config() is the internal callback for the call from + * pcmcia_loop_config() to pccard_loop_tuple(). Data is transferred + * by a struct pcmcia_cfg_mem. + */ +static int pcmcia_do_loop_config(tuple_t *tuple, cisparse_t *parse, void *priv) +{ + struct pcmcia_cfg_mem *cfg_mem = priv; + struct pcmcia_device *p_dev = cfg_mem->p_dev; + cistpl_cftable_entry_t *cfg = &parse->cftable_entry; + cistpl_cftable_entry_t *dflt = &cfg_mem->dflt; + unsigned int flags = p_dev->config_flags; + unsigned int vcc = p_dev->socket->socket.Vcc; + + dev_dbg(&p_dev->dev, "testing configuration %x, autoconf %x\n", + cfg->index, flags); + + /* default values */ + cfg_mem->p_dev->config_index = cfg->index; + if (cfg->flags & CISTPL_CFTABLE_DEFAULT) + cfg_mem->dflt = *cfg; + + /* check for matching Vcc? */ + if (flags & CONF_AUTO_CHECK_VCC) { + if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) { + if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) + return -ENODEV; + } else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) { + if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000) + return -ENODEV; + } + } + + /* set Vpp? */ + if (flags & CONF_AUTO_SET_VPP) { + if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) + p_dev->vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; + else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM)) + p_dev->vpp = + dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000; + } + + /* enable audio? */ + if ((flags & CONF_AUTO_AUDIO) && (cfg->flags & CISTPL_CFTABLE_AUDIO)) + p_dev->config_flags |= CONF_ENABLE_SPKR; + + + /* IO window settings? */ + if (flags & CONF_AUTO_SET_IO) { + cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; + int i = 0; + + p_dev->resource[0]->start = p_dev->resource[0]->end = 0; + p_dev->resource[1]->start = p_dev->resource[1]->end = 0; + if (io->nwin == 0) + return -ENODEV; + + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= + pcmcia_io_cfg_data_width(io->flags); + if (io->nwin > 1) { + /* For multifunction cards, by convention, we + * configure the network function with window 0, + * and serial with window 1 */ + i = (io->win[1].len > io->win[0].len); + p_dev->resource[1]->flags = p_dev->resource[0]->flags; + p_dev->resource[1]->start = io->win[1-i].base; + p_dev->resource[1]->end = io->win[1-i].len; + } + p_dev->resource[0]->start = io->win[i].base; + p_dev->resource[0]->end = io->win[i].len; + p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; + } + + /* MEM window settings? */ + if (flags & CONF_AUTO_SET_IOMEM) { + /* so far, we only set one memory window */ + cistpl_mem_t *mem = (cfg->mem.nwin) ? &cfg->mem : &dflt->mem; + + p_dev->resource[2]->start = p_dev->resource[2]->end = 0; + if (mem->nwin == 0) + return -ENODEV; + + p_dev->resource[2]->start = mem->win[0].host_addr; + p_dev->resource[2]->end = mem->win[0].len; + if (p_dev->resource[2]->end < 0x1000) + p_dev->resource[2]->end = 0x1000; + p_dev->card_addr = mem->win[0].card_addr; + } + + dev_dbg(&p_dev->dev, + "checking configuration %x: %pr %pr %pr (%d lines)\n", + p_dev->config_index, p_dev->resource[0], p_dev->resource[1], + p_dev->resource[2], p_dev->io_lines); + + return cfg_mem->conf_check(p_dev, cfg_mem->priv_data); +} + +/** + * pcmcia_loop_config() - loop over configuration options + * @p_dev: the struct pcmcia_device which we need to loop for. + * @conf_check: function to call for each configuration option. + * It gets passed the struct pcmcia_device and private data + * being passed to pcmcia_loop_config() + * @priv_data: private data to be passed to the conf_check function. + * + * pcmcia_loop_config() loops over all configuration options, and calls + * the driver-specific conf_check() for each one, checking whether + * it is a valid one. Returns 0 on success or errorcode otherwise. + */ +int pcmcia_loop_config(struct pcmcia_device *p_dev, + int (*conf_check) (struct pcmcia_device *p_dev, + void *priv_data), + void *priv_data) +{ + struct pcmcia_cfg_mem *cfg_mem; + int ret; + + cfg_mem = kzalloc(sizeof(struct pcmcia_cfg_mem), GFP_KERNEL); + if (cfg_mem == NULL) + return -ENOMEM; + + cfg_mem->p_dev = p_dev; + cfg_mem->conf_check = conf_check; + cfg_mem->priv_data = priv_data; + + ret = pccard_loop_tuple(p_dev->socket, p_dev->func, + CISTPL_CFTABLE_ENTRY, &cfg_mem->parse, + cfg_mem, pcmcia_do_loop_config); + + kfree(cfg_mem); + return ret; +} +EXPORT_SYMBOL(pcmcia_loop_config); + + +struct pcmcia_loop_mem { + struct pcmcia_device *p_dev; + void *priv_data; + int (*loop_tuple) (struct pcmcia_device *p_dev, + tuple_t *tuple, + void *priv_data); +}; + +/* + * pcmcia_do_loop_tuple() - internal helper for pcmcia_loop_config() + * + * pcmcia_do_loop_tuple() is the internal callback for the call from + * pcmcia_loop_tuple() to pccard_loop_tuple(). Data is transferred + * by a struct pcmcia_cfg_mem. + */ +static int pcmcia_do_loop_tuple(tuple_t *tuple, cisparse_t *parse, void *priv) +{ + struct pcmcia_loop_mem *loop = priv; + + return loop->loop_tuple(loop->p_dev, tuple, loop->priv_data); +}; + +/** + * pcmcia_loop_tuple() - loop over tuples in the CIS + * @p_dev: the struct pcmcia_device which we need to loop for. + * @code: which CIS code shall we look for? + * @priv_data: private data to be passed to the loop_tuple function. + * @loop_tuple: function to call for each CIS entry of type @function. IT + * gets passed the raw tuple and @priv_data. + * + * pcmcia_loop_tuple() loops over all CIS entries of type @function, and + * calls the @loop_tuple function for each entry. If the call to @loop_tuple + * returns 0, the loop exits. Returns 0 on success or errorcode otherwise. + */ +int pcmcia_loop_tuple(struct pcmcia_device *p_dev, cisdata_t code, + int (*loop_tuple) (struct pcmcia_device *p_dev, + tuple_t *tuple, + void *priv_data), + void *priv_data) +{ + struct pcmcia_loop_mem loop = { + .p_dev = p_dev, + .loop_tuple = loop_tuple, + .priv_data = priv_data}; + + return pccard_loop_tuple(p_dev->socket, p_dev->func, code, NULL, + &loop, pcmcia_do_loop_tuple); +} +EXPORT_SYMBOL(pcmcia_loop_tuple); + + +struct pcmcia_loop_get { + size_t len; + cisdata_t **buf; +}; + +/* + * pcmcia_do_get_tuple() - internal helper for pcmcia_get_tuple() + * + * pcmcia_do_get_tuple() is the internal callback for the call from + * pcmcia_get_tuple() to pcmcia_loop_tuple(). As we're only interested in + * the first tuple, return 0 unconditionally. Create a memory buffer large + * enough to hold the content of the tuple, and fill it with the tuple data. + * The caller is responsible to free the buffer. + */ +static int pcmcia_do_get_tuple(struct pcmcia_device *p_dev, tuple_t *tuple, + void *priv) +{ + struct pcmcia_loop_get *get = priv; + + *get->buf = kzalloc(tuple->TupleDataLen, GFP_KERNEL); + if (*get->buf) { + get->len = tuple->TupleDataLen; + memcpy(*get->buf, tuple->TupleData, tuple->TupleDataLen); + } else + dev_dbg(&p_dev->dev, "do_get_tuple: out of memory\n"); + return 0; +} + +/** + * pcmcia_get_tuple() - get first tuple from CIS + * @p_dev: the struct pcmcia_device which we need to loop for. + * @code: which CIS code shall we look for? + * @buf: pointer to store the buffer to. + * + * pcmcia_get_tuple() gets the content of the first CIS entry of type @code. + * It returns the buffer length (or zero). The caller is responsible to free + * the buffer passed in @buf. + */ +size_t pcmcia_get_tuple(struct pcmcia_device *p_dev, cisdata_t code, + unsigned char **buf) +{ + struct pcmcia_loop_get get = { + .len = 0, + .buf = buf, + }; + + *get.buf = NULL; + pcmcia_loop_tuple(p_dev, code, pcmcia_do_get_tuple, &get); + + return get.len; +} +EXPORT_SYMBOL(pcmcia_get_tuple); + +#ifdef CONFIG_NET +/* + * pcmcia_do_get_mac() - internal helper for pcmcia_get_mac_from_cis() + * + * pcmcia_do_get_mac() is the internal callback for the call from + * pcmcia_get_mac_from_cis() to pcmcia_loop_tuple(). We check whether the + * tuple contains a proper LAN_NODE_ID of length 6, and copy the data + * to struct net_device->dev_addr[i]. + */ +static int pcmcia_do_get_mac(struct pcmcia_device *p_dev, tuple_t *tuple, + void *priv) +{ + struct net_device *dev = priv; + + if (tuple->TupleData[0] != CISTPL_FUNCE_LAN_NODE_ID) + return -EINVAL; + if (tuple->TupleDataLen < ETH_ALEN + 2) { + dev_warn(&p_dev->dev, "Invalid CIS tuple length for " + "LAN_NODE_ID\n"); + return -EINVAL; + } + + if (tuple->TupleData[1] != ETH_ALEN) { + dev_warn(&p_dev->dev, "Invalid header for LAN_NODE_ID\n"); + return -EINVAL; + } + eth_hw_addr_set(dev, &tuple->TupleData[2]); + return 0; +} + +/** + * pcmcia_get_mac_from_cis() - read out MAC address from CISTPL_FUNCE + * @p_dev: the struct pcmcia_device for which we want the address. + * @dev: a properly prepared struct net_device to store the info to. + * + * pcmcia_get_mac_from_cis() reads out the hardware MAC address from + * CISTPL_FUNCE and stores it into struct net_device *dev->dev_addr which + * must be set up properly by the driver (see examples!). + */ +int pcmcia_get_mac_from_cis(struct pcmcia_device *p_dev, struct net_device *dev) +{ + return pcmcia_loop_tuple(p_dev, CISTPL_FUNCE, pcmcia_do_get_mac, dev); +} +EXPORT_SYMBOL(pcmcia_get_mac_from_cis); + +#endif /* CONFIG_NET */ |