summaryrefslogtreecommitdiffstats
path: root/drivers/perf/arm_spe_pmu.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/perf/arm_spe_pmu.c')
-rw-r--r--drivers/perf/arm_spe_pmu.c1338
1 files changed, 1338 insertions, 0 deletions
diff --git a/drivers/perf/arm_spe_pmu.c b/drivers/perf/arm_spe_pmu.c
new file mode 100644
index 0000000000..d2b0cbf0e0
--- /dev/null
+++ b/drivers/perf/arm_spe_pmu.c
@@ -0,0 +1,1338 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Perf support for the Statistical Profiling Extension, introduced as
+ * part of ARMv8.2.
+ *
+ * Copyright (C) 2016 ARM Limited
+ *
+ * Author: Will Deacon <will.deacon@arm.com>
+ */
+
+#define PMUNAME "arm_spe"
+#define DRVNAME PMUNAME "_pmu"
+#define pr_fmt(fmt) DRVNAME ": " fmt
+
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/bug.h>
+#include <linux/capability.h>
+#include <linux/cpuhotplug.h>
+#include <linux/cpumask.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/perf_event.h>
+#include <linux/perf/arm_pmu.h>
+#include <linux/platform_device.h>
+#include <linux/printk.h>
+#include <linux/slab.h>
+#include <linux/smp.h>
+#include <linux/vmalloc.h>
+
+#include <asm/barrier.h>
+#include <asm/cpufeature.h>
+#include <asm/mmu.h>
+#include <asm/sysreg.h>
+
+/*
+ * Cache if the event is allowed to trace Context information.
+ * This allows us to perform the check, i.e, perfmon_capable(),
+ * in the context of the event owner, once, during the event_init().
+ */
+#define SPE_PMU_HW_FLAGS_CX 0x00001
+
+static_assert((PERF_EVENT_FLAG_ARCH & SPE_PMU_HW_FLAGS_CX) == SPE_PMU_HW_FLAGS_CX);
+
+static void set_spe_event_has_cx(struct perf_event *event)
+{
+ if (IS_ENABLED(CONFIG_PID_IN_CONTEXTIDR) && perfmon_capable())
+ event->hw.flags |= SPE_PMU_HW_FLAGS_CX;
+}
+
+static bool get_spe_event_has_cx(struct perf_event *event)
+{
+ return !!(event->hw.flags & SPE_PMU_HW_FLAGS_CX);
+}
+
+#define ARM_SPE_BUF_PAD_BYTE 0
+
+struct arm_spe_pmu_buf {
+ int nr_pages;
+ bool snapshot;
+ void *base;
+};
+
+struct arm_spe_pmu {
+ struct pmu pmu;
+ struct platform_device *pdev;
+ cpumask_t supported_cpus;
+ struct hlist_node hotplug_node;
+
+ int irq; /* PPI */
+ u16 pmsver;
+ u16 min_period;
+ u16 counter_sz;
+
+#define SPE_PMU_FEAT_FILT_EVT (1UL << 0)
+#define SPE_PMU_FEAT_FILT_TYP (1UL << 1)
+#define SPE_PMU_FEAT_FILT_LAT (1UL << 2)
+#define SPE_PMU_FEAT_ARCH_INST (1UL << 3)
+#define SPE_PMU_FEAT_LDS (1UL << 4)
+#define SPE_PMU_FEAT_ERND (1UL << 5)
+#define SPE_PMU_FEAT_INV_FILT_EVT (1UL << 6)
+#define SPE_PMU_FEAT_DEV_PROBED (1UL << 63)
+ u64 features;
+
+ u16 max_record_sz;
+ u16 align;
+ struct perf_output_handle __percpu *handle;
+};
+
+#define to_spe_pmu(p) (container_of(p, struct arm_spe_pmu, pmu))
+
+/* Convert a free-running index from perf into an SPE buffer offset */
+#define PERF_IDX2OFF(idx, buf) ((idx) % ((buf)->nr_pages << PAGE_SHIFT))
+
+/* Keep track of our dynamic hotplug state */
+static enum cpuhp_state arm_spe_pmu_online;
+
+enum arm_spe_pmu_buf_fault_action {
+ SPE_PMU_BUF_FAULT_ACT_SPURIOUS,
+ SPE_PMU_BUF_FAULT_ACT_FATAL,
+ SPE_PMU_BUF_FAULT_ACT_OK,
+};
+
+/* This sysfs gunk was really good fun to write. */
+enum arm_spe_pmu_capabilities {
+ SPE_PMU_CAP_ARCH_INST = 0,
+ SPE_PMU_CAP_ERND,
+ SPE_PMU_CAP_FEAT_MAX,
+ SPE_PMU_CAP_CNT_SZ = SPE_PMU_CAP_FEAT_MAX,
+ SPE_PMU_CAP_MIN_IVAL,
+};
+
+static int arm_spe_pmu_feat_caps[SPE_PMU_CAP_FEAT_MAX] = {
+ [SPE_PMU_CAP_ARCH_INST] = SPE_PMU_FEAT_ARCH_INST,
+ [SPE_PMU_CAP_ERND] = SPE_PMU_FEAT_ERND,
+};
+
+static u32 arm_spe_pmu_cap_get(struct arm_spe_pmu *spe_pmu, int cap)
+{
+ if (cap < SPE_PMU_CAP_FEAT_MAX)
+ return !!(spe_pmu->features & arm_spe_pmu_feat_caps[cap]);
+
+ switch (cap) {
+ case SPE_PMU_CAP_CNT_SZ:
+ return spe_pmu->counter_sz;
+ case SPE_PMU_CAP_MIN_IVAL:
+ return spe_pmu->min_period;
+ default:
+ WARN(1, "unknown cap %d\n", cap);
+ }
+
+ return 0;
+}
+
+static ssize_t arm_spe_pmu_cap_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct arm_spe_pmu *spe_pmu = dev_get_drvdata(dev);
+ struct dev_ext_attribute *ea =
+ container_of(attr, struct dev_ext_attribute, attr);
+ int cap = (long)ea->var;
+
+ return sysfs_emit(buf, "%u\n", arm_spe_pmu_cap_get(spe_pmu, cap));
+}
+
+#define SPE_EXT_ATTR_ENTRY(_name, _func, _var) \
+ &((struct dev_ext_attribute[]) { \
+ { __ATTR(_name, S_IRUGO, _func, NULL), (void *)_var } \
+ })[0].attr.attr
+
+#define SPE_CAP_EXT_ATTR_ENTRY(_name, _var) \
+ SPE_EXT_ATTR_ENTRY(_name, arm_spe_pmu_cap_show, _var)
+
+static struct attribute *arm_spe_pmu_cap_attr[] = {
+ SPE_CAP_EXT_ATTR_ENTRY(arch_inst, SPE_PMU_CAP_ARCH_INST),
+ SPE_CAP_EXT_ATTR_ENTRY(ernd, SPE_PMU_CAP_ERND),
+ SPE_CAP_EXT_ATTR_ENTRY(count_size, SPE_PMU_CAP_CNT_SZ),
+ SPE_CAP_EXT_ATTR_ENTRY(min_interval, SPE_PMU_CAP_MIN_IVAL),
+ NULL,
+};
+
+static const struct attribute_group arm_spe_pmu_cap_group = {
+ .name = "caps",
+ .attrs = arm_spe_pmu_cap_attr,
+};
+
+/* User ABI */
+#define ATTR_CFG_FLD_ts_enable_CFG config /* PMSCR_EL1.TS */
+#define ATTR_CFG_FLD_ts_enable_LO 0
+#define ATTR_CFG_FLD_ts_enable_HI 0
+#define ATTR_CFG_FLD_pa_enable_CFG config /* PMSCR_EL1.PA */
+#define ATTR_CFG_FLD_pa_enable_LO 1
+#define ATTR_CFG_FLD_pa_enable_HI 1
+#define ATTR_CFG_FLD_pct_enable_CFG config /* PMSCR_EL1.PCT */
+#define ATTR_CFG_FLD_pct_enable_LO 2
+#define ATTR_CFG_FLD_pct_enable_HI 2
+#define ATTR_CFG_FLD_jitter_CFG config /* PMSIRR_EL1.RND */
+#define ATTR_CFG_FLD_jitter_LO 16
+#define ATTR_CFG_FLD_jitter_HI 16
+#define ATTR_CFG_FLD_branch_filter_CFG config /* PMSFCR_EL1.B */
+#define ATTR_CFG_FLD_branch_filter_LO 32
+#define ATTR_CFG_FLD_branch_filter_HI 32
+#define ATTR_CFG_FLD_load_filter_CFG config /* PMSFCR_EL1.LD */
+#define ATTR_CFG_FLD_load_filter_LO 33
+#define ATTR_CFG_FLD_load_filter_HI 33
+#define ATTR_CFG_FLD_store_filter_CFG config /* PMSFCR_EL1.ST */
+#define ATTR_CFG_FLD_store_filter_LO 34
+#define ATTR_CFG_FLD_store_filter_HI 34
+
+#define ATTR_CFG_FLD_event_filter_CFG config1 /* PMSEVFR_EL1 */
+#define ATTR_CFG_FLD_event_filter_LO 0
+#define ATTR_CFG_FLD_event_filter_HI 63
+
+#define ATTR_CFG_FLD_min_latency_CFG config2 /* PMSLATFR_EL1.MINLAT */
+#define ATTR_CFG_FLD_min_latency_LO 0
+#define ATTR_CFG_FLD_min_latency_HI 11
+
+#define ATTR_CFG_FLD_inv_event_filter_CFG config3 /* PMSNEVFR_EL1 */
+#define ATTR_CFG_FLD_inv_event_filter_LO 0
+#define ATTR_CFG_FLD_inv_event_filter_HI 63
+
+/* Why does everything I do descend into this? */
+#define __GEN_PMU_FORMAT_ATTR(cfg, lo, hi) \
+ (lo) == (hi) ? #cfg ":" #lo "\n" : #cfg ":" #lo "-" #hi
+
+#define _GEN_PMU_FORMAT_ATTR(cfg, lo, hi) \
+ __GEN_PMU_FORMAT_ATTR(cfg, lo, hi)
+
+#define GEN_PMU_FORMAT_ATTR(name) \
+ PMU_FORMAT_ATTR(name, \
+ _GEN_PMU_FORMAT_ATTR(ATTR_CFG_FLD_##name##_CFG, \
+ ATTR_CFG_FLD_##name##_LO, \
+ ATTR_CFG_FLD_##name##_HI))
+
+#define _ATTR_CFG_GET_FLD(attr, cfg, lo, hi) \
+ ((((attr)->cfg) >> lo) & GENMASK(hi - lo, 0))
+
+#define ATTR_CFG_GET_FLD(attr, name) \
+ _ATTR_CFG_GET_FLD(attr, \
+ ATTR_CFG_FLD_##name##_CFG, \
+ ATTR_CFG_FLD_##name##_LO, \
+ ATTR_CFG_FLD_##name##_HI)
+
+GEN_PMU_FORMAT_ATTR(ts_enable);
+GEN_PMU_FORMAT_ATTR(pa_enable);
+GEN_PMU_FORMAT_ATTR(pct_enable);
+GEN_PMU_FORMAT_ATTR(jitter);
+GEN_PMU_FORMAT_ATTR(branch_filter);
+GEN_PMU_FORMAT_ATTR(load_filter);
+GEN_PMU_FORMAT_ATTR(store_filter);
+GEN_PMU_FORMAT_ATTR(event_filter);
+GEN_PMU_FORMAT_ATTR(inv_event_filter);
+GEN_PMU_FORMAT_ATTR(min_latency);
+
+static struct attribute *arm_spe_pmu_formats_attr[] = {
+ &format_attr_ts_enable.attr,
+ &format_attr_pa_enable.attr,
+ &format_attr_pct_enable.attr,
+ &format_attr_jitter.attr,
+ &format_attr_branch_filter.attr,
+ &format_attr_load_filter.attr,
+ &format_attr_store_filter.attr,
+ &format_attr_event_filter.attr,
+ &format_attr_inv_event_filter.attr,
+ &format_attr_min_latency.attr,
+ NULL,
+};
+
+static umode_t arm_spe_pmu_format_attr_is_visible(struct kobject *kobj,
+ struct attribute *attr,
+ int unused)
+ {
+ struct device *dev = kobj_to_dev(kobj);
+ struct arm_spe_pmu *spe_pmu = dev_get_drvdata(dev);
+
+ if (attr == &format_attr_inv_event_filter.attr && !(spe_pmu->features & SPE_PMU_FEAT_INV_FILT_EVT))
+ return 0;
+
+ return attr->mode;
+}
+
+static const struct attribute_group arm_spe_pmu_format_group = {
+ .name = "format",
+ .is_visible = arm_spe_pmu_format_attr_is_visible,
+ .attrs = arm_spe_pmu_formats_attr,
+};
+
+static ssize_t cpumask_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct arm_spe_pmu *spe_pmu = dev_get_drvdata(dev);
+
+ return cpumap_print_to_pagebuf(true, buf, &spe_pmu->supported_cpus);
+}
+static DEVICE_ATTR_RO(cpumask);
+
+static struct attribute *arm_spe_pmu_attrs[] = {
+ &dev_attr_cpumask.attr,
+ NULL,
+};
+
+static const struct attribute_group arm_spe_pmu_group = {
+ .attrs = arm_spe_pmu_attrs,
+};
+
+static const struct attribute_group *arm_spe_pmu_attr_groups[] = {
+ &arm_spe_pmu_group,
+ &arm_spe_pmu_cap_group,
+ &arm_spe_pmu_format_group,
+ NULL,
+};
+
+/* Convert between user ABI and register values */
+static u64 arm_spe_event_to_pmscr(struct perf_event *event)
+{
+ struct perf_event_attr *attr = &event->attr;
+ u64 reg = 0;
+
+ reg |= FIELD_PREP(PMSCR_EL1_TS, ATTR_CFG_GET_FLD(attr, ts_enable));
+ reg |= FIELD_PREP(PMSCR_EL1_PA, ATTR_CFG_GET_FLD(attr, pa_enable));
+ reg |= FIELD_PREP(PMSCR_EL1_PCT, ATTR_CFG_GET_FLD(attr, pct_enable));
+
+ if (!attr->exclude_user)
+ reg |= PMSCR_EL1_E0SPE;
+
+ if (!attr->exclude_kernel)
+ reg |= PMSCR_EL1_E1SPE;
+
+ if (get_spe_event_has_cx(event))
+ reg |= PMSCR_EL1_CX;
+
+ return reg;
+}
+
+static void arm_spe_event_sanitise_period(struct perf_event *event)
+{
+ struct arm_spe_pmu *spe_pmu = to_spe_pmu(event->pmu);
+ u64 period = event->hw.sample_period;
+ u64 max_period = PMSIRR_EL1_INTERVAL_MASK;
+
+ if (period < spe_pmu->min_period)
+ period = spe_pmu->min_period;
+ else if (period > max_period)
+ period = max_period;
+ else
+ period &= max_period;
+
+ event->hw.sample_period = period;
+}
+
+static u64 arm_spe_event_to_pmsirr(struct perf_event *event)
+{
+ struct perf_event_attr *attr = &event->attr;
+ u64 reg = 0;
+
+ arm_spe_event_sanitise_period(event);
+
+ reg |= FIELD_PREP(PMSIRR_EL1_RND, ATTR_CFG_GET_FLD(attr, jitter));
+ reg |= event->hw.sample_period;
+
+ return reg;
+}
+
+static u64 arm_spe_event_to_pmsfcr(struct perf_event *event)
+{
+ struct perf_event_attr *attr = &event->attr;
+ u64 reg = 0;
+
+ reg |= FIELD_PREP(PMSFCR_EL1_LD, ATTR_CFG_GET_FLD(attr, load_filter));
+ reg |= FIELD_PREP(PMSFCR_EL1_ST, ATTR_CFG_GET_FLD(attr, store_filter));
+ reg |= FIELD_PREP(PMSFCR_EL1_B, ATTR_CFG_GET_FLD(attr, branch_filter));
+
+ if (reg)
+ reg |= PMSFCR_EL1_FT;
+
+ if (ATTR_CFG_GET_FLD(attr, event_filter))
+ reg |= PMSFCR_EL1_FE;
+
+ if (ATTR_CFG_GET_FLD(attr, inv_event_filter))
+ reg |= PMSFCR_EL1_FnE;
+
+ if (ATTR_CFG_GET_FLD(attr, min_latency))
+ reg |= PMSFCR_EL1_FL;
+
+ return reg;
+}
+
+static u64 arm_spe_event_to_pmsevfr(struct perf_event *event)
+{
+ struct perf_event_attr *attr = &event->attr;
+ return ATTR_CFG_GET_FLD(attr, event_filter);
+}
+
+static u64 arm_spe_event_to_pmsnevfr(struct perf_event *event)
+{
+ struct perf_event_attr *attr = &event->attr;
+ return ATTR_CFG_GET_FLD(attr, inv_event_filter);
+}
+
+static u64 arm_spe_event_to_pmslatfr(struct perf_event *event)
+{
+ struct perf_event_attr *attr = &event->attr;
+ return FIELD_PREP(PMSLATFR_EL1_MINLAT, ATTR_CFG_GET_FLD(attr, min_latency));
+}
+
+static void arm_spe_pmu_pad_buf(struct perf_output_handle *handle, int len)
+{
+ struct arm_spe_pmu_buf *buf = perf_get_aux(handle);
+ u64 head = PERF_IDX2OFF(handle->head, buf);
+
+ memset(buf->base + head, ARM_SPE_BUF_PAD_BYTE, len);
+ if (!buf->snapshot)
+ perf_aux_output_skip(handle, len);
+}
+
+static u64 arm_spe_pmu_next_snapshot_off(struct perf_output_handle *handle)
+{
+ struct arm_spe_pmu_buf *buf = perf_get_aux(handle);
+ struct arm_spe_pmu *spe_pmu = to_spe_pmu(handle->event->pmu);
+ u64 head = PERF_IDX2OFF(handle->head, buf);
+ u64 limit = buf->nr_pages * PAGE_SIZE;
+
+ /*
+ * The trace format isn't parseable in reverse, so clamp
+ * the limit to half of the buffer size in snapshot mode
+ * so that the worst case is half a buffer of records, as
+ * opposed to a single record.
+ */
+ if (head < limit >> 1)
+ limit >>= 1;
+
+ /*
+ * If we're within max_record_sz of the limit, we must
+ * pad, move the head index and recompute the limit.
+ */
+ if (limit - head < spe_pmu->max_record_sz) {
+ arm_spe_pmu_pad_buf(handle, limit - head);
+ handle->head = PERF_IDX2OFF(limit, buf);
+ limit = ((buf->nr_pages * PAGE_SIZE) >> 1) + handle->head;
+ }
+
+ return limit;
+}
+
+static u64 __arm_spe_pmu_next_off(struct perf_output_handle *handle)
+{
+ struct arm_spe_pmu *spe_pmu = to_spe_pmu(handle->event->pmu);
+ struct arm_spe_pmu_buf *buf = perf_get_aux(handle);
+ const u64 bufsize = buf->nr_pages * PAGE_SIZE;
+ u64 limit = bufsize;
+ u64 head, tail, wakeup;
+
+ /*
+ * The head can be misaligned for two reasons:
+ *
+ * 1. The hardware left PMBPTR pointing to the first byte after
+ * a record when generating a buffer management event.
+ *
+ * 2. We used perf_aux_output_skip to consume handle->size bytes
+ * and CIRC_SPACE was used to compute the size, which always
+ * leaves one entry free.
+ *
+ * Deal with this by padding to the next alignment boundary and
+ * moving the head index. If we run out of buffer space, we'll
+ * reduce handle->size to zero and end up reporting truncation.
+ */
+ head = PERF_IDX2OFF(handle->head, buf);
+ if (!IS_ALIGNED(head, spe_pmu->align)) {
+ unsigned long delta = roundup(head, spe_pmu->align) - head;
+
+ delta = min(delta, handle->size);
+ arm_spe_pmu_pad_buf(handle, delta);
+ head = PERF_IDX2OFF(handle->head, buf);
+ }
+
+ /* If we've run out of free space, then nothing more to do */
+ if (!handle->size)
+ goto no_space;
+
+ /* Compute the tail and wakeup indices now that we've aligned head */
+ tail = PERF_IDX2OFF(handle->head + handle->size, buf);
+ wakeup = PERF_IDX2OFF(handle->wakeup, buf);
+
+ /*
+ * Avoid clobbering unconsumed data. We know we have space, so
+ * if we see head == tail we know that the buffer is empty. If
+ * head > tail, then there's nothing to clobber prior to
+ * wrapping.
+ */
+ if (head < tail)
+ limit = round_down(tail, PAGE_SIZE);
+
+ /*
+ * Wakeup may be arbitrarily far into the future. If it's not in
+ * the current generation, either we'll wrap before hitting it,
+ * or it's in the past and has been handled already.
+ *
+ * If there's a wakeup before we wrap, arrange to be woken up by
+ * the page boundary following it. Keep the tail boundary if
+ * that's lower.
+ */
+ if (handle->wakeup < (handle->head + handle->size) && head <= wakeup)
+ limit = min(limit, round_up(wakeup, PAGE_SIZE));
+
+ if (limit > head)
+ return limit;
+
+ arm_spe_pmu_pad_buf(handle, handle->size);
+no_space:
+ perf_aux_output_flag(handle, PERF_AUX_FLAG_TRUNCATED);
+ perf_aux_output_end(handle, 0);
+ return 0;
+}
+
+static u64 arm_spe_pmu_next_off(struct perf_output_handle *handle)
+{
+ struct arm_spe_pmu_buf *buf = perf_get_aux(handle);
+ struct arm_spe_pmu *spe_pmu = to_spe_pmu(handle->event->pmu);
+ u64 limit = __arm_spe_pmu_next_off(handle);
+ u64 head = PERF_IDX2OFF(handle->head, buf);
+
+ /*
+ * If the head has come too close to the end of the buffer,
+ * then pad to the end and recompute the limit.
+ */
+ if (limit && (limit - head < spe_pmu->max_record_sz)) {
+ arm_spe_pmu_pad_buf(handle, limit - head);
+ limit = __arm_spe_pmu_next_off(handle);
+ }
+
+ return limit;
+}
+
+static void arm_spe_perf_aux_output_begin(struct perf_output_handle *handle,
+ struct perf_event *event)
+{
+ u64 base, limit;
+ struct arm_spe_pmu_buf *buf;
+
+ /* Start a new aux session */
+ buf = perf_aux_output_begin(handle, event);
+ if (!buf) {
+ event->hw.state |= PERF_HES_STOPPED;
+ /*
+ * We still need to clear the limit pointer, since the
+ * profiler might only be disabled by virtue of a fault.
+ */
+ limit = 0;
+ goto out_write_limit;
+ }
+
+ limit = buf->snapshot ? arm_spe_pmu_next_snapshot_off(handle)
+ : arm_spe_pmu_next_off(handle);
+ if (limit)
+ limit |= PMBLIMITR_EL1_E;
+
+ limit += (u64)buf->base;
+ base = (u64)buf->base + PERF_IDX2OFF(handle->head, buf);
+ write_sysreg_s(base, SYS_PMBPTR_EL1);
+
+out_write_limit:
+ write_sysreg_s(limit, SYS_PMBLIMITR_EL1);
+}
+
+static void arm_spe_perf_aux_output_end(struct perf_output_handle *handle)
+{
+ struct arm_spe_pmu_buf *buf = perf_get_aux(handle);
+ u64 offset, size;
+
+ offset = read_sysreg_s(SYS_PMBPTR_EL1) - (u64)buf->base;
+ size = offset - PERF_IDX2OFF(handle->head, buf);
+
+ if (buf->snapshot)
+ handle->head = offset;
+
+ perf_aux_output_end(handle, size);
+}
+
+static void arm_spe_pmu_disable_and_drain_local(void)
+{
+ /* Disable profiling at EL0 and EL1 */
+ write_sysreg_s(0, SYS_PMSCR_EL1);
+ isb();
+
+ /* Drain any buffered data */
+ psb_csync();
+ dsb(nsh);
+
+ /* Disable the profiling buffer */
+ write_sysreg_s(0, SYS_PMBLIMITR_EL1);
+ isb();
+}
+
+/* IRQ handling */
+static enum arm_spe_pmu_buf_fault_action
+arm_spe_pmu_buf_get_fault_act(struct perf_output_handle *handle)
+{
+ const char *err_str;
+ u64 pmbsr;
+ enum arm_spe_pmu_buf_fault_action ret;
+
+ /*
+ * Ensure new profiling data is visible to the CPU and any external
+ * aborts have been resolved.
+ */
+ psb_csync();
+ dsb(nsh);
+
+ /* Ensure hardware updates to PMBPTR_EL1 are visible */
+ isb();
+
+ /* Service required? */
+ pmbsr = read_sysreg_s(SYS_PMBSR_EL1);
+ if (!FIELD_GET(PMBSR_EL1_S, pmbsr))
+ return SPE_PMU_BUF_FAULT_ACT_SPURIOUS;
+
+ /*
+ * If we've lost data, disable profiling and also set the PARTIAL
+ * flag to indicate that the last record is corrupted.
+ */
+ if (FIELD_GET(PMBSR_EL1_DL, pmbsr))
+ perf_aux_output_flag(handle, PERF_AUX_FLAG_TRUNCATED |
+ PERF_AUX_FLAG_PARTIAL);
+
+ /* Report collisions to userspace so that it can up the period */
+ if (FIELD_GET(PMBSR_EL1_COLL, pmbsr))
+ perf_aux_output_flag(handle, PERF_AUX_FLAG_COLLISION);
+
+ /* We only expect buffer management events */
+ switch (FIELD_GET(PMBSR_EL1_EC, pmbsr)) {
+ case PMBSR_EL1_EC_BUF:
+ /* Handled below */
+ break;
+ case PMBSR_EL1_EC_FAULT_S1:
+ case PMBSR_EL1_EC_FAULT_S2:
+ err_str = "Unexpected buffer fault";
+ goto out_err;
+ default:
+ err_str = "Unknown error code";
+ goto out_err;
+ }
+
+ /* Buffer management event */
+ switch (FIELD_GET(PMBSR_EL1_BUF_BSC_MASK, pmbsr)) {
+ case PMBSR_EL1_BUF_BSC_FULL:
+ ret = SPE_PMU_BUF_FAULT_ACT_OK;
+ goto out_stop;
+ default:
+ err_str = "Unknown buffer status code";
+ }
+
+out_err:
+ pr_err_ratelimited("%s on CPU %d [PMBSR=0x%016llx, PMBPTR=0x%016llx, PMBLIMITR=0x%016llx]\n",
+ err_str, smp_processor_id(), pmbsr,
+ read_sysreg_s(SYS_PMBPTR_EL1),
+ read_sysreg_s(SYS_PMBLIMITR_EL1));
+ ret = SPE_PMU_BUF_FAULT_ACT_FATAL;
+
+out_stop:
+ arm_spe_perf_aux_output_end(handle);
+ return ret;
+}
+
+static irqreturn_t arm_spe_pmu_irq_handler(int irq, void *dev)
+{
+ struct perf_output_handle *handle = dev;
+ struct perf_event *event = handle->event;
+ enum arm_spe_pmu_buf_fault_action act;
+
+ if (!perf_get_aux(handle))
+ return IRQ_NONE;
+
+ act = arm_spe_pmu_buf_get_fault_act(handle);
+ if (act == SPE_PMU_BUF_FAULT_ACT_SPURIOUS)
+ return IRQ_NONE;
+
+ /*
+ * Ensure perf callbacks have completed, which may disable the
+ * profiling buffer in response to a TRUNCATION flag.
+ */
+ irq_work_run();
+
+ switch (act) {
+ case SPE_PMU_BUF_FAULT_ACT_FATAL:
+ /*
+ * If a fatal exception occurred then leaving the profiling
+ * buffer enabled is a recipe waiting to happen. Since
+ * fatal faults don't always imply truncation, make sure
+ * that the profiling buffer is disabled explicitly before
+ * clearing the syndrome register.
+ */
+ arm_spe_pmu_disable_and_drain_local();
+ break;
+ case SPE_PMU_BUF_FAULT_ACT_OK:
+ /*
+ * We handled the fault (the buffer was full), so resume
+ * profiling as long as we didn't detect truncation.
+ * PMBPTR might be misaligned, but we'll burn that bridge
+ * when we get to it.
+ */
+ if (!(handle->aux_flags & PERF_AUX_FLAG_TRUNCATED)) {
+ arm_spe_perf_aux_output_begin(handle, event);
+ isb();
+ }
+ break;
+ case SPE_PMU_BUF_FAULT_ACT_SPURIOUS:
+ /* We've seen you before, but GCC has the memory of a sieve. */
+ break;
+ }
+
+ /* The buffer pointers are now sane, so resume profiling. */
+ write_sysreg_s(0, SYS_PMBSR_EL1);
+ return IRQ_HANDLED;
+}
+
+static u64 arm_spe_pmsevfr_res0(u16 pmsver)
+{
+ switch (pmsver) {
+ case ID_AA64DFR0_EL1_PMSVer_IMP:
+ return PMSEVFR_EL1_RES0_IMP;
+ case ID_AA64DFR0_EL1_PMSVer_V1P1:
+ return PMSEVFR_EL1_RES0_V1P1;
+ case ID_AA64DFR0_EL1_PMSVer_V1P2:
+ /* Return the highest version we support in default */
+ default:
+ return PMSEVFR_EL1_RES0_V1P2;
+ }
+}
+
+/* Perf callbacks */
+static int arm_spe_pmu_event_init(struct perf_event *event)
+{
+ u64 reg;
+ struct perf_event_attr *attr = &event->attr;
+ struct arm_spe_pmu *spe_pmu = to_spe_pmu(event->pmu);
+
+ /* This is, of course, deeply driver-specific */
+ if (attr->type != event->pmu->type)
+ return -ENOENT;
+
+ if (event->cpu >= 0 &&
+ !cpumask_test_cpu(event->cpu, &spe_pmu->supported_cpus))
+ return -ENOENT;
+
+ if (arm_spe_event_to_pmsevfr(event) & arm_spe_pmsevfr_res0(spe_pmu->pmsver))
+ return -EOPNOTSUPP;
+
+ if (arm_spe_event_to_pmsnevfr(event) & arm_spe_pmsevfr_res0(spe_pmu->pmsver))
+ return -EOPNOTSUPP;
+
+ if (attr->exclude_idle)
+ return -EOPNOTSUPP;
+
+ /*
+ * Feedback-directed frequency throttling doesn't work when we
+ * have a buffer of samples. We'd need to manually count the
+ * samples in the buffer when it fills up and adjust the event
+ * count to reflect that. Instead, just force the user to specify
+ * a sample period.
+ */
+ if (attr->freq)
+ return -EINVAL;
+
+ reg = arm_spe_event_to_pmsfcr(event);
+ if ((FIELD_GET(PMSFCR_EL1_FE, reg)) &&
+ !(spe_pmu->features & SPE_PMU_FEAT_FILT_EVT))
+ return -EOPNOTSUPP;
+
+ if ((FIELD_GET(PMSFCR_EL1_FnE, reg)) &&
+ !(spe_pmu->features & SPE_PMU_FEAT_INV_FILT_EVT))
+ return -EOPNOTSUPP;
+
+ if ((FIELD_GET(PMSFCR_EL1_FT, reg)) &&
+ !(spe_pmu->features & SPE_PMU_FEAT_FILT_TYP))
+ return -EOPNOTSUPP;
+
+ if ((FIELD_GET(PMSFCR_EL1_FL, reg)) &&
+ !(spe_pmu->features & SPE_PMU_FEAT_FILT_LAT))
+ return -EOPNOTSUPP;
+
+ set_spe_event_has_cx(event);
+ reg = arm_spe_event_to_pmscr(event);
+ if (!perfmon_capable() &&
+ (reg & (PMSCR_EL1_PA | PMSCR_EL1_PCT)))
+ return -EACCES;
+
+ return 0;
+}
+
+static void arm_spe_pmu_start(struct perf_event *event, int flags)
+{
+ u64 reg;
+ struct arm_spe_pmu *spe_pmu = to_spe_pmu(event->pmu);
+ struct hw_perf_event *hwc = &event->hw;
+ struct perf_output_handle *handle = this_cpu_ptr(spe_pmu->handle);
+
+ hwc->state = 0;
+ arm_spe_perf_aux_output_begin(handle, event);
+ if (hwc->state)
+ return;
+
+ reg = arm_spe_event_to_pmsfcr(event);
+ write_sysreg_s(reg, SYS_PMSFCR_EL1);
+
+ reg = arm_spe_event_to_pmsevfr(event);
+ write_sysreg_s(reg, SYS_PMSEVFR_EL1);
+
+ if (spe_pmu->features & SPE_PMU_FEAT_INV_FILT_EVT) {
+ reg = arm_spe_event_to_pmsnevfr(event);
+ write_sysreg_s(reg, SYS_PMSNEVFR_EL1);
+ }
+
+ reg = arm_spe_event_to_pmslatfr(event);
+ write_sysreg_s(reg, SYS_PMSLATFR_EL1);
+
+ if (flags & PERF_EF_RELOAD) {
+ reg = arm_spe_event_to_pmsirr(event);
+ write_sysreg_s(reg, SYS_PMSIRR_EL1);
+ isb();
+ reg = local64_read(&hwc->period_left);
+ write_sysreg_s(reg, SYS_PMSICR_EL1);
+ }
+
+ reg = arm_spe_event_to_pmscr(event);
+ isb();
+ write_sysreg_s(reg, SYS_PMSCR_EL1);
+}
+
+static void arm_spe_pmu_stop(struct perf_event *event, int flags)
+{
+ struct arm_spe_pmu *spe_pmu = to_spe_pmu(event->pmu);
+ struct hw_perf_event *hwc = &event->hw;
+ struct perf_output_handle *handle = this_cpu_ptr(spe_pmu->handle);
+
+ /* If we're already stopped, then nothing to do */
+ if (hwc->state & PERF_HES_STOPPED)
+ return;
+
+ /* Stop all trace generation */
+ arm_spe_pmu_disable_and_drain_local();
+
+ if (flags & PERF_EF_UPDATE) {
+ /*
+ * If there's a fault pending then ensure we contain it
+ * to this buffer, since we might be on the context-switch
+ * path.
+ */
+ if (perf_get_aux(handle)) {
+ enum arm_spe_pmu_buf_fault_action act;
+
+ act = arm_spe_pmu_buf_get_fault_act(handle);
+ if (act == SPE_PMU_BUF_FAULT_ACT_SPURIOUS)
+ arm_spe_perf_aux_output_end(handle);
+ else
+ write_sysreg_s(0, SYS_PMBSR_EL1);
+ }
+
+ /*
+ * This may also contain ECOUNT, but nobody else should
+ * be looking at period_left, since we forbid frequency
+ * based sampling.
+ */
+ local64_set(&hwc->period_left, read_sysreg_s(SYS_PMSICR_EL1));
+ hwc->state |= PERF_HES_UPTODATE;
+ }
+
+ hwc->state |= PERF_HES_STOPPED;
+}
+
+static int arm_spe_pmu_add(struct perf_event *event, int flags)
+{
+ int ret = 0;
+ struct arm_spe_pmu *spe_pmu = to_spe_pmu(event->pmu);
+ struct hw_perf_event *hwc = &event->hw;
+ int cpu = event->cpu == -1 ? smp_processor_id() : event->cpu;
+
+ if (!cpumask_test_cpu(cpu, &spe_pmu->supported_cpus))
+ return -ENOENT;
+
+ hwc->state = PERF_HES_UPTODATE | PERF_HES_STOPPED;
+
+ if (flags & PERF_EF_START) {
+ arm_spe_pmu_start(event, PERF_EF_RELOAD);
+ if (hwc->state & PERF_HES_STOPPED)
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+static void arm_spe_pmu_del(struct perf_event *event, int flags)
+{
+ arm_spe_pmu_stop(event, PERF_EF_UPDATE);
+}
+
+static void arm_spe_pmu_read(struct perf_event *event)
+{
+}
+
+static void *arm_spe_pmu_setup_aux(struct perf_event *event, void **pages,
+ int nr_pages, bool snapshot)
+{
+ int i, cpu = event->cpu;
+ struct page **pglist;
+ struct arm_spe_pmu_buf *buf;
+
+ /* We need at least two pages for this to work. */
+ if (nr_pages < 2)
+ return NULL;
+
+ /*
+ * We require an even number of pages for snapshot mode, so that
+ * we can effectively treat the buffer as consisting of two equal
+ * parts and give userspace a fighting chance of getting some
+ * useful data out of it.
+ */
+ if (snapshot && (nr_pages & 1))
+ return NULL;
+
+ if (cpu == -1)
+ cpu = raw_smp_processor_id();
+
+ buf = kzalloc_node(sizeof(*buf), GFP_KERNEL, cpu_to_node(cpu));
+ if (!buf)
+ return NULL;
+
+ pglist = kcalloc(nr_pages, sizeof(*pglist), GFP_KERNEL);
+ if (!pglist)
+ goto out_free_buf;
+
+ for (i = 0; i < nr_pages; ++i)
+ pglist[i] = virt_to_page(pages[i]);
+
+ buf->base = vmap(pglist, nr_pages, VM_MAP, PAGE_KERNEL);
+ if (!buf->base)
+ goto out_free_pglist;
+
+ buf->nr_pages = nr_pages;
+ buf->snapshot = snapshot;
+
+ kfree(pglist);
+ return buf;
+
+out_free_pglist:
+ kfree(pglist);
+out_free_buf:
+ kfree(buf);
+ return NULL;
+}
+
+static void arm_spe_pmu_free_aux(void *aux)
+{
+ struct arm_spe_pmu_buf *buf = aux;
+
+ vunmap(buf->base);
+ kfree(buf);
+}
+
+/* Initialisation and teardown functions */
+static int arm_spe_pmu_perf_init(struct arm_spe_pmu *spe_pmu)
+{
+ static atomic_t pmu_idx = ATOMIC_INIT(-1);
+
+ int idx;
+ char *name;
+ struct device *dev = &spe_pmu->pdev->dev;
+
+ spe_pmu->pmu = (struct pmu) {
+ .module = THIS_MODULE,
+ .capabilities = PERF_PMU_CAP_EXCLUSIVE | PERF_PMU_CAP_ITRACE,
+ .attr_groups = arm_spe_pmu_attr_groups,
+ /*
+ * We hitch a ride on the software context here, so that
+ * we can support per-task profiling (which is not possible
+ * with the invalid context as it doesn't get sched callbacks).
+ * This requires that userspace either uses a dummy event for
+ * perf_event_open, since the aux buffer is not setup until
+ * a subsequent mmap, or creates the profiling event in a
+ * disabled state and explicitly PERF_EVENT_IOC_ENABLEs it
+ * once the buffer has been created.
+ */
+ .task_ctx_nr = perf_sw_context,
+ .event_init = arm_spe_pmu_event_init,
+ .add = arm_spe_pmu_add,
+ .del = arm_spe_pmu_del,
+ .start = arm_spe_pmu_start,
+ .stop = arm_spe_pmu_stop,
+ .read = arm_spe_pmu_read,
+ .setup_aux = arm_spe_pmu_setup_aux,
+ .free_aux = arm_spe_pmu_free_aux,
+ };
+
+ idx = atomic_inc_return(&pmu_idx);
+ name = devm_kasprintf(dev, GFP_KERNEL, "%s_%d", PMUNAME, idx);
+ if (!name) {
+ dev_err(dev, "failed to allocate name for pmu %d\n", idx);
+ return -ENOMEM;
+ }
+
+ return perf_pmu_register(&spe_pmu->pmu, name, -1);
+}
+
+static void arm_spe_pmu_perf_destroy(struct arm_spe_pmu *spe_pmu)
+{
+ perf_pmu_unregister(&spe_pmu->pmu);
+}
+
+static void __arm_spe_pmu_dev_probe(void *info)
+{
+ int fld;
+ u64 reg;
+ struct arm_spe_pmu *spe_pmu = info;
+ struct device *dev = &spe_pmu->pdev->dev;
+
+ fld = cpuid_feature_extract_unsigned_field(read_cpuid(ID_AA64DFR0_EL1),
+ ID_AA64DFR0_EL1_PMSVer_SHIFT);
+ if (!fld) {
+ dev_err(dev,
+ "unsupported ID_AA64DFR0_EL1.PMSVer [%d] on CPU %d\n",
+ fld, smp_processor_id());
+ return;
+ }
+ spe_pmu->pmsver = (u16)fld;
+
+ /* Read PMBIDR first to determine whether or not we have access */
+ reg = read_sysreg_s(SYS_PMBIDR_EL1);
+ if (FIELD_GET(PMBIDR_EL1_P, reg)) {
+ dev_err(dev,
+ "profiling buffer owned by higher exception level\n");
+ return;
+ }
+
+ /* Minimum alignment. If it's out-of-range, then fail the probe */
+ fld = FIELD_GET(PMBIDR_EL1_ALIGN, reg);
+ spe_pmu->align = 1 << fld;
+ if (spe_pmu->align > SZ_2K) {
+ dev_err(dev, "unsupported PMBIDR.Align [%d] on CPU %d\n",
+ fld, smp_processor_id());
+ return;
+ }
+
+ /* It's now safe to read PMSIDR and figure out what we've got */
+ reg = read_sysreg_s(SYS_PMSIDR_EL1);
+ if (FIELD_GET(PMSIDR_EL1_FE, reg))
+ spe_pmu->features |= SPE_PMU_FEAT_FILT_EVT;
+
+ if (FIELD_GET(PMSIDR_EL1_FnE, reg))
+ spe_pmu->features |= SPE_PMU_FEAT_INV_FILT_EVT;
+
+ if (FIELD_GET(PMSIDR_EL1_FT, reg))
+ spe_pmu->features |= SPE_PMU_FEAT_FILT_TYP;
+
+ if (FIELD_GET(PMSIDR_EL1_FL, reg))
+ spe_pmu->features |= SPE_PMU_FEAT_FILT_LAT;
+
+ if (FIELD_GET(PMSIDR_EL1_ARCHINST, reg))
+ spe_pmu->features |= SPE_PMU_FEAT_ARCH_INST;
+
+ if (FIELD_GET(PMSIDR_EL1_LDS, reg))
+ spe_pmu->features |= SPE_PMU_FEAT_LDS;
+
+ if (FIELD_GET(PMSIDR_EL1_ERND, reg))
+ spe_pmu->features |= SPE_PMU_FEAT_ERND;
+
+ /* This field has a spaced out encoding, so just use a look-up */
+ fld = FIELD_GET(PMSIDR_EL1_INTERVAL, reg);
+ switch (fld) {
+ case PMSIDR_EL1_INTERVAL_256:
+ spe_pmu->min_period = 256;
+ break;
+ case PMSIDR_EL1_INTERVAL_512:
+ spe_pmu->min_period = 512;
+ break;
+ case PMSIDR_EL1_INTERVAL_768:
+ spe_pmu->min_period = 768;
+ break;
+ case PMSIDR_EL1_INTERVAL_1024:
+ spe_pmu->min_period = 1024;
+ break;
+ case PMSIDR_EL1_INTERVAL_1536:
+ spe_pmu->min_period = 1536;
+ break;
+ case PMSIDR_EL1_INTERVAL_2048:
+ spe_pmu->min_period = 2048;
+ break;
+ case PMSIDR_EL1_INTERVAL_3072:
+ spe_pmu->min_period = 3072;
+ break;
+ default:
+ dev_warn(dev, "unknown PMSIDR_EL1.Interval [%d]; assuming 8\n",
+ fld);
+ fallthrough;
+ case PMSIDR_EL1_INTERVAL_4096:
+ spe_pmu->min_period = 4096;
+ }
+
+ /* Maximum record size. If it's out-of-range, then fail the probe */
+ fld = FIELD_GET(PMSIDR_EL1_MAXSIZE, reg);
+ spe_pmu->max_record_sz = 1 << fld;
+ if (spe_pmu->max_record_sz > SZ_2K || spe_pmu->max_record_sz < 16) {
+ dev_err(dev, "unsupported PMSIDR_EL1.MaxSize [%d] on CPU %d\n",
+ fld, smp_processor_id());
+ return;
+ }
+
+ fld = FIELD_GET(PMSIDR_EL1_COUNTSIZE, reg);
+ switch (fld) {
+ default:
+ dev_warn(dev, "unknown PMSIDR_EL1.CountSize [%d]; assuming 2\n",
+ fld);
+ fallthrough;
+ case PMSIDR_EL1_COUNTSIZE_12_BIT_SAT:
+ spe_pmu->counter_sz = 12;
+ break;
+ case PMSIDR_EL1_COUNTSIZE_16_BIT_SAT:
+ spe_pmu->counter_sz = 16;
+ }
+
+ dev_info(dev,
+ "probed SPEv1.%d for CPUs %*pbl [max_record_sz %u, align %u, features 0x%llx]\n",
+ spe_pmu->pmsver - 1, cpumask_pr_args(&spe_pmu->supported_cpus),
+ spe_pmu->max_record_sz, spe_pmu->align, spe_pmu->features);
+
+ spe_pmu->features |= SPE_PMU_FEAT_DEV_PROBED;
+}
+
+static void __arm_spe_pmu_reset_local(void)
+{
+ /*
+ * This is probably overkill, as we have no idea where we're
+ * draining any buffered data to...
+ */
+ arm_spe_pmu_disable_and_drain_local();
+
+ /* Reset the buffer base pointer */
+ write_sysreg_s(0, SYS_PMBPTR_EL1);
+ isb();
+
+ /* Clear any pending management interrupts */
+ write_sysreg_s(0, SYS_PMBSR_EL1);
+ isb();
+}
+
+static void __arm_spe_pmu_setup_one(void *info)
+{
+ struct arm_spe_pmu *spe_pmu = info;
+
+ __arm_spe_pmu_reset_local();
+ enable_percpu_irq(spe_pmu->irq, IRQ_TYPE_NONE);
+}
+
+static void __arm_spe_pmu_stop_one(void *info)
+{
+ struct arm_spe_pmu *spe_pmu = info;
+
+ disable_percpu_irq(spe_pmu->irq);
+ __arm_spe_pmu_reset_local();
+}
+
+static int arm_spe_pmu_cpu_startup(unsigned int cpu, struct hlist_node *node)
+{
+ struct arm_spe_pmu *spe_pmu;
+
+ spe_pmu = hlist_entry_safe(node, struct arm_spe_pmu, hotplug_node);
+ if (!cpumask_test_cpu(cpu, &spe_pmu->supported_cpus))
+ return 0;
+
+ __arm_spe_pmu_setup_one(spe_pmu);
+ return 0;
+}
+
+static int arm_spe_pmu_cpu_teardown(unsigned int cpu, struct hlist_node *node)
+{
+ struct arm_spe_pmu *spe_pmu;
+
+ spe_pmu = hlist_entry_safe(node, struct arm_spe_pmu, hotplug_node);
+ if (!cpumask_test_cpu(cpu, &spe_pmu->supported_cpus))
+ return 0;
+
+ __arm_spe_pmu_stop_one(spe_pmu);
+ return 0;
+}
+
+static int arm_spe_pmu_dev_init(struct arm_spe_pmu *spe_pmu)
+{
+ int ret;
+ cpumask_t *mask = &spe_pmu->supported_cpus;
+
+ /* Make sure we probe the hardware on a relevant CPU */
+ ret = smp_call_function_any(mask, __arm_spe_pmu_dev_probe, spe_pmu, 1);
+ if (ret || !(spe_pmu->features & SPE_PMU_FEAT_DEV_PROBED))
+ return -ENXIO;
+
+ /* Request our PPIs (note that the IRQ is still disabled) */
+ ret = request_percpu_irq(spe_pmu->irq, arm_spe_pmu_irq_handler, DRVNAME,
+ spe_pmu->handle);
+ if (ret)
+ return ret;
+
+ /*
+ * Register our hotplug notifier now so we don't miss any events.
+ * This will enable the IRQ for any supported CPUs that are already
+ * up.
+ */
+ ret = cpuhp_state_add_instance(arm_spe_pmu_online,
+ &spe_pmu->hotplug_node);
+ if (ret)
+ free_percpu_irq(spe_pmu->irq, spe_pmu->handle);
+
+ return ret;
+}
+
+static void arm_spe_pmu_dev_teardown(struct arm_spe_pmu *spe_pmu)
+{
+ cpuhp_state_remove_instance(arm_spe_pmu_online, &spe_pmu->hotplug_node);
+ free_percpu_irq(spe_pmu->irq, spe_pmu->handle);
+}
+
+/* Driver and device probing */
+static int arm_spe_pmu_irq_probe(struct arm_spe_pmu *spe_pmu)
+{
+ struct platform_device *pdev = spe_pmu->pdev;
+ int irq = platform_get_irq(pdev, 0);
+
+ if (irq < 0)
+ return -ENXIO;
+
+ if (!irq_is_percpu(irq)) {
+ dev_err(&pdev->dev, "expected PPI but got SPI (%d)\n", irq);
+ return -EINVAL;
+ }
+
+ if (irq_get_percpu_devid_partition(irq, &spe_pmu->supported_cpus)) {
+ dev_err(&pdev->dev, "failed to get PPI partition (%d)\n", irq);
+ return -EINVAL;
+ }
+
+ spe_pmu->irq = irq;
+ return 0;
+}
+
+static const struct of_device_id arm_spe_pmu_of_match[] = {
+ { .compatible = "arm,statistical-profiling-extension-v1", .data = (void *)1 },
+ { /* Sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, arm_spe_pmu_of_match);
+
+static const struct platform_device_id arm_spe_match[] = {
+ { ARMV8_SPE_PDEV_NAME, 0},
+ { }
+};
+MODULE_DEVICE_TABLE(platform, arm_spe_match);
+
+static int arm_spe_pmu_device_probe(struct platform_device *pdev)
+{
+ int ret;
+ struct arm_spe_pmu *spe_pmu;
+ struct device *dev = &pdev->dev;
+
+ /*
+ * If kernelspace is unmapped when running at EL0, then the SPE
+ * buffer will fault and prematurely terminate the AUX session.
+ */
+ if (arm64_kernel_unmapped_at_el0()) {
+ dev_warn_once(dev, "profiling buffer inaccessible. Try passing \"kpti=off\" on the kernel command line\n");
+ return -EPERM;
+ }
+
+ spe_pmu = devm_kzalloc(dev, sizeof(*spe_pmu), GFP_KERNEL);
+ if (!spe_pmu)
+ return -ENOMEM;
+
+ spe_pmu->handle = alloc_percpu(typeof(*spe_pmu->handle));
+ if (!spe_pmu->handle)
+ return -ENOMEM;
+
+ spe_pmu->pdev = pdev;
+ platform_set_drvdata(pdev, spe_pmu);
+
+ ret = arm_spe_pmu_irq_probe(spe_pmu);
+ if (ret)
+ goto out_free_handle;
+
+ ret = arm_spe_pmu_dev_init(spe_pmu);
+ if (ret)
+ goto out_free_handle;
+
+ ret = arm_spe_pmu_perf_init(spe_pmu);
+ if (ret)
+ goto out_teardown_dev;
+
+ return 0;
+
+out_teardown_dev:
+ arm_spe_pmu_dev_teardown(spe_pmu);
+out_free_handle:
+ free_percpu(spe_pmu->handle);
+ return ret;
+}
+
+static int arm_spe_pmu_device_remove(struct platform_device *pdev)
+{
+ struct arm_spe_pmu *spe_pmu = platform_get_drvdata(pdev);
+
+ arm_spe_pmu_perf_destroy(spe_pmu);
+ arm_spe_pmu_dev_teardown(spe_pmu);
+ free_percpu(spe_pmu->handle);
+ return 0;
+}
+
+static struct platform_driver arm_spe_pmu_driver = {
+ .id_table = arm_spe_match,
+ .driver = {
+ .name = DRVNAME,
+ .of_match_table = of_match_ptr(arm_spe_pmu_of_match),
+ .suppress_bind_attrs = true,
+ },
+ .probe = arm_spe_pmu_device_probe,
+ .remove = arm_spe_pmu_device_remove,
+};
+
+static int __init arm_spe_pmu_init(void)
+{
+ int ret;
+
+ ret = cpuhp_setup_state_multi(CPUHP_AP_ONLINE_DYN, DRVNAME,
+ arm_spe_pmu_cpu_startup,
+ arm_spe_pmu_cpu_teardown);
+ if (ret < 0)
+ return ret;
+ arm_spe_pmu_online = ret;
+
+ ret = platform_driver_register(&arm_spe_pmu_driver);
+ if (ret)
+ cpuhp_remove_multi_state(arm_spe_pmu_online);
+
+ return ret;
+}
+
+static void __exit arm_spe_pmu_exit(void)
+{
+ platform_driver_unregister(&arm_spe_pmu_driver);
+ cpuhp_remove_multi_state(arm_spe_pmu_online);
+}
+
+module_init(arm_spe_pmu_init);
+module_exit(arm_spe_pmu_exit);
+
+MODULE_DESCRIPTION("Perf driver for the ARMv8.2 Statistical Profiling Extension");
+MODULE_AUTHOR("Will Deacon <will.deacon@arm.com>");
+MODULE_LICENSE("GPL v2");