summaryrefslogtreecommitdiffstats
path: root/drivers/phy/hisilicon
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/phy/hisilicon')
-rw-r--r--drivers/phy/hisilicon/Kconfig71
-rw-r--r--drivers/phy/hisilicon/Makefile8
-rw-r--r--drivers/phy/hisilicon/phy-hi3660-usb3.c234
-rw-r--r--drivers/phy/hisilicon/phy-hi3670-pcie.c845
-rw-r--r--drivers/phy/hisilicon/phy-hi3670-usb3.c662
-rw-r--r--drivers/phy/hisilicon/phy-hi6220-usb.c165
-rw-r--r--drivers/phy/hisilicon/phy-hisi-inno-usb2.c220
-rw-r--r--drivers/phy/hisilicon/phy-histb-combphy.c285
-rw-r--r--drivers/phy/hisilicon/phy-hix5hd2-sata.c188
9 files changed, 2678 insertions, 0 deletions
diff --git a/drivers/phy/hisilicon/Kconfig b/drivers/phy/hisilicon/Kconfig
new file mode 100644
index 0000000000..6c89136fc8
--- /dev/null
+++ b/drivers/phy/hisilicon/Kconfig
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Phy drivers for Hisilicon platforms
+#
+config PHY_HI6220_USB
+ tristate "hi6220 USB PHY support"
+ depends on (ARCH_HISI && ARM64) || COMPILE_TEST
+ depends on HAS_IOMEM
+ select GENERIC_PHY
+ select MFD_SYSCON
+ help
+ Enable this to support the HISILICON HI6220 USB PHY.
+
+ To compile this driver as a module, choose M here.
+
+config PHY_HI3660_USB
+ tristate "hi3660 USB PHY support"
+ depends on (ARCH_HISI && ARM64) || COMPILE_TEST
+ select GENERIC_PHY
+ select MFD_SYSCON
+ help
+ Enable this to support the HISILICON HI3660 USB PHY.
+
+ To compile this driver as a module, choose M here.
+
+config PHY_HI3670_USB
+ tristate "hi3670 USB PHY support"
+ depends on (ARCH_HISI && ARM64) || COMPILE_TEST
+ select GENERIC_PHY
+ select MFD_SYSCON
+ help
+ Enable this to support the HISILICON HI3670 USB PHY.
+
+ To compile this driver as a module, choose M here.
+
+config PHY_HI3670_PCIE
+ tristate "hi3670 PCIe PHY support"
+ depends on (ARCH_HISI && ARM64) || COMPILE_TEST
+ select GENERIC_PHY
+ select MFD_SYSCON
+ help
+ Enable this to support the HiSilicon hi3670 PCIe PHY.
+
+ To compile this driver as a module, choose M here.
+
+config PHY_HISTB_COMBPHY
+ tristate "HiSilicon STB SoCs COMBPHY support"
+ depends on (ARCH_HISI && ARM64) || COMPILE_TEST
+ select GENERIC_PHY
+ select MFD_SYSCON
+ help
+ Enable this to support the HISILICON STB SoCs COMBPHY.
+ If unsure, say N.
+
+config PHY_HISI_INNO_USB2
+ tristate "HiSilicon INNO USB2 PHY support"
+ depends on ARCH_HISI || COMPILE_TEST
+ select GENERIC_PHY
+ select MFD_SYSCON
+ help
+ Support for INNO USB2 PHY on HiSilicon SoCs. This Phy supports
+ USB 1.5Mb/s, USB 12Mb/s, USB 480Mb/s speeds. It supports one
+ USB host port to accept one USB device.
+
+config PHY_HIX5HD2_SATA
+ tristate "HIX5HD2 SATA PHY Driver"
+ depends on ARCH_HIX5HD2 && OF && HAS_IOMEM
+ select GENERIC_PHY
+ select MFD_SYSCON
+ help
+ Support for SATA PHY on Hisilicon hix5hd2 Soc.
diff --git a/drivers/phy/hisilicon/Makefile b/drivers/phy/hisilicon/Makefile
new file mode 100644
index 0000000000..4029d3813b
--- /dev/null
+++ b/drivers/phy/hisilicon/Makefile
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_PHY_HI6220_USB) += phy-hi6220-usb.o
+obj-$(CONFIG_PHY_HI3660_USB) += phy-hi3660-usb3.o
+obj-$(CONFIG_PHY_HI3670_USB) += phy-hi3670-usb3.o
+obj-$(CONFIG_PHY_HI3670_PCIE) += phy-hi3670-pcie.o
+obj-$(CONFIG_PHY_HISTB_COMBPHY) += phy-histb-combphy.o
+obj-$(CONFIG_PHY_HISI_INNO_USB2) += phy-hisi-inno-usb2.o
+obj-$(CONFIG_PHY_HIX5HD2_SATA) += phy-hix5hd2-sata.o
diff --git a/drivers/phy/hisilicon/phy-hi3660-usb3.c b/drivers/phy/hisilicon/phy-hi3660-usb3.c
new file mode 100644
index 0000000000..e2a09d67fa
--- /dev/null
+++ b/drivers/phy/hisilicon/phy-hi3660-usb3.c
@@ -0,0 +1,234 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Phy provider for USB 3.0 controller on HiSilicon 3660 platform
+ *
+ * Copyright (C) 2017-2018 Hilisicon Electronics Co., Ltd.
+ * http://www.huawei.com
+ *
+ * Authors: Yu Chen <chenyu56@huawei.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define PERI_CRG_CLK_EN4 0x40
+#define PERI_CRG_CLK_DIS4 0x44
+#define GT_CLK_USB3OTG_REF BIT(0)
+#define GT_ACLK_USB3OTG BIT(1)
+
+#define PERI_CRG_RSTEN4 0x90
+#define PERI_CRG_RSTDIS4 0x94
+#define IP_RST_USB3OTGPHY_POR BIT(3)
+#define IP_RST_USB3OTG BIT(5)
+
+#define PERI_CRG_ISODIS 0x148
+#define USB_REFCLK_ISO_EN BIT(25)
+
+#define PCTRL_PERI_CTRL3 0x10
+#define PCTRL_PERI_CTRL3_MSK_START 16
+#define USB_TCXO_EN BIT(1)
+
+#define PCTRL_PERI_CTRL24 0x64
+#define SC_CLK_USB3PHY_3MUX1_SEL BIT(25)
+
+#define USBOTG3_CTRL0 0x00
+#define SC_USB3PHY_ABB_GT_EN BIT(15)
+
+#define USBOTG3_CTRL2 0x08
+#define USBOTG3CTRL2_POWERDOWN_HSP BIT(0)
+#define USBOTG3CTRL2_POWERDOWN_SSP BIT(1)
+
+#define USBOTG3_CTRL3 0x0C
+#define USBOTG3_CTRL3_VBUSVLDEXT BIT(6)
+#define USBOTG3_CTRL3_VBUSVLDEXTSEL BIT(5)
+
+#define USBOTG3_CTRL4 0x10
+
+#define USBOTG3_CTRL7 0x1c
+#define REF_SSP_EN BIT(16)
+
+/* This value config the default txtune parameter of the usb 2.0 phy */
+#define HI3660_USB_DEFAULT_PHY_PARAM 0x1c466e3
+
+struct hi3660_priv {
+ struct device *dev;
+ struct regmap *peri_crg;
+ struct regmap *pctrl;
+ struct regmap *otg_bc;
+ u32 eye_diagram_param;
+};
+
+static int hi3660_phy_init(struct phy *phy)
+{
+ struct hi3660_priv *priv = phy_get_drvdata(phy);
+ u32 val, mask;
+ int ret;
+
+ /* usb refclk iso disable */
+ ret = regmap_write(priv->peri_crg, PERI_CRG_ISODIS, USB_REFCLK_ISO_EN);
+ if (ret)
+ goto out;
+
+ /* enable usb_tcxo_en */
+ val = USB_TCXO_EN | (USB_TCXO_EN << PCTRL_PERI_CTRL3_MSK_START);
+ ret = regmap_write(priv->pctrl, PCTRL_PERI_CTRL3, val);
+ if (ret)
+ goto out;
+
+ /* assert phy */
+ val = IP_RST_USB3OTGPHY_POR | IP_RST_USB3OTG;
+ ret = regmap_write(priv->peri_crg, PERI_CRG_RSTEN4, val);
+ if (ret)
+ goto out;
+
+ /* enable phy ref clk */
+ val = SC_USB3PHY_ABB_GT_EN;
+ mask = val;
+ ret = regmap_update_bits(priv->otg_bc, USBOTG3_CTRL0, mask, val);
+ if (ret)
+ goto out;
+
+ val = REF_SSP_EN;
+ mask = val;
+ ret = regmap_update_bits(priv->otg_bc, USBOTG3_CTRL7, mask, val);
+ if (ret)
+ goto out;
+
+ /* exit from IDDQ mode */
+ mask = USBOTG3CTRL2_POWERDOWN_HSP | USBOTG3CTRL2_POWERDOWN_SSP;
+ ret = regmap_update_bits(priv->otg_bc, USBOTG3_CTRL2, mask, 0);
+ if (ret)
+ goto out;
+
+ /* delay for exit from IDDQ mode */
+ usleep_range(100, 120);
+
+ /* deassert phy */
+ val = IP_RST_USB3OTGPHY_POR | IP_RST_USB3OTG;
+ ret = regmap_write(priv->peri_crg, PERI_CRG_RSTDIS4, val);
+ if (ret)
+ goto out;
+
+ /* delay for phy deasserted */
+ usleep_range(10000, 15000);
+
+ /* fake vbus valid signal */
+ val = USBOTG3_CTRL3_VBUSVLDEXT | USBOTG3_CTRL3_VBUSVLDEXTSEL;
+ mask = val;
+ ret = regmap_update_bits(priv->otg_bc, USBOTG3_CTRL3, mask, val);
+ if (ret)
+ goto out;
+
+ /* delay for vbus valid */
+ usleep_range(100, 120);
+
+ ret = regmap_write(priv->otg_bc, USBOTG3_CTRL4,
+ priv->eye_diagram_param);
+ if (ret)
+ goto out;
+
+ return 0;
+out:
+ dev_err(priv->dev, "failed to init phy ret: %d\n", ret);
+ return ret;
+}
+
+static int hi3660_phy_exit(struct phy *phy)
+{
+ struct hi3660_priv *priv = phy_get_drvdata(phy);
+ u32 val;
+ int ret;
+
+ /* assert phy */
+ val = IP_RST_USB3OTGPHY_POR;
+ ret = regmap_write(priv->peri_crg, PERI_CRG_RSTEN4, val);
+ if (ret)
+ goto out;
+
+ /* disable usb_tcxo_en */
+ val = USB_TCXO_EN << PCTRL_PERI_CTRL3_MSK_START;
+ ret = regmap_write(priv->pctrl, PCTRL_PERI_CTRL3, val);
+ if (ret)
+ goto out;
+
+ return 0;
+out:
+ dev_err(priv->dev, "failed to exit phy ret: %d\n", ret);
+ return ret;
+}
+
+static const struct phy_ops hi3660_phy_ops = {
+ .init = hi3660_phy_init,
+ .exit = hi3660_phy_exit,
+ .owner = THIS_MODULE,
+};
+
+static int hi3660_phy_probe(struct platform_device *pdev)
+{
+ struct phy_provider *phy_provider;
+ struct device *dev = &pdev->dev;
+ struct phy *phy;
+ struct hi3660_priv *priv;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->dev = dev;
+ priv->peri_crg = syscon_regmap_lookup_by_phandle(dev->of_node,
+ "hisilicon,pericrg-syscon");
+ if (IS_ERR(priv->peri_crg)) {
+ dev_err(dev, "no hisilicon,pericrg-syscon\n");
+ return PTR_ERR(priv->peri_crg);
+ }
+
+ priv->pctrl = syscon_regmap_lookup_by_phandle(dev->of_node,
+ "hisilicon,pctrl-syscon");
+ if (IS_ERR(priv->pctrl)) {
+ dev_err(dev, "no hisilicon,pctrl-syscon\n");
+ return PTR_ERR(priv->pctrl);
+ }
+
+ /* node of hi3660 phy is a sub-node of usb3_otg_bc */
+ priv->otg_bc = syscon_node_to_regmap(dev->parent->of_node);
+ if (IS_ERR(priv->otg_bc)) {
+ dev_err(dev, "no hisilicon,usb3-otg-bc-syscon\n");
+ return PTR_ERR(priv->otg_bc);
+ }
+
+ if (of_property_read_u32(dev->of_node, "hisilicon,eye-diagram-param",
+ &(priv->eye_diagram_param)))
+ priv->eye_diagram_param = HI3660_USB_DEFAULT_PHY_PARAM;
+
+ phy = devm_phy_create(dev, NULL, &hi3660_phy_ops);
+ if (IS_ERR(phy))
+ return PTR_ERR(phy);
+
+ phy_set_drvdata(phy, priv);
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+ return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id hi3660_phy_of_match[] = {
+ {.compatible = "hisilicon,hi3660-usb-phy",},
+ { }
+};
+MODULE_DEVICE_TABLE(of, hi3660_phy_of_match);
+
+static struct platform_driver hi3660_phy_driver = {
+ .probe = hi3660_phy_probe,
+ .driver = {
+ .name = "hi3660-usb-phy",
+ .of_match_table = hi3660_phy_of_match,
+ }
+};
+module_platform_driver(hi3660_phy_driver);
+
+MODULE_AUTHOR("Yu Chen <chenyu56@huawei.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Hilisicon Hi3660 USB3 PHY Driver");
diff --git a/drivers/phy/hisilicon/phy-hi3670-pcie.c b/drivers/phy/hisilicon/phy-hi3670-pcie.c
new file mode 100644
index 0000000000..0ac9634b39
--- /dev/null
+++ b/drivers/phy/hisilicon/phy-hi3670-pcie.c
@@ -0,0 +1,845 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * PCIe phy driver for Kirin 970
+ *
+ * Copyright (C) 2017 HiSilicon Electronics Co., Ltd.
+ * https://www.huawei.com
+ * Copyright (C) 2021 Huawei Technologies Co., Ltd.
+ * https://www.huawei.com
+ *
+ * Authors:
+ * Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+ * Manivannan Sadhasivam <mani@kernel.org>
+ *
+ * Based on:
+ * https://lore.kernel.org/lkml/4c9d6581478aa966698758c0420933f5defab4dd.1612335031.git.mchehab+huawei@kernel.org/
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_gpio.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define AXI_CLK_FREQ 207500000
+#define REF_CLK_FREQ 100000000
+
+/* PCIe CTRL registers */
+#define SOC_PCIECTRL_CTRL7_ADDR 0x01c
+#define SOC_PCIECTRL_CTRL12_ADDR 0x030
+#define SOC_PCIECTRL_CTRL20_ADDR 0x050
+#define SOC_PCIECTRL_CTRL21_ADDR 0x054
+
+#define PCIE_OUTPUT_PULL_BITS GENMASK(3, 0)
+#define SOC_PCIECTRL_CTRL20_2P_MEM_CTRL 0x02605550
+#define SOC_PCIECTRL_CTRL21_DEFAULT 0x20000070
+#define PCIE_PULL_UP_SYS_AUX_PWR_DET BIT(10)
+#define PCIE_OUTPUT_PULL_DOWN BIT(1)
+
+/* PCIe PHY registers */
+#define SOC_PCIEPHY_CTRL0_ADDR 0x000
+#define SOC_PCIEPHY_CTRL1_ADDR 0x004
+#define SOC_PCIEPHY_CTRL38_ADDR 0x0098
+#define SOC_PCIEPHY_STATE0_ADDR 0x400
+
+#define RAWLANEN_DIG_PCS_XF_TX_OVRD_IN_1 0xc004
+#define SUP_DIG_LVL_OVRD_IN 0x003c
+#define LANEN_DIG_ASIC_TX_OVRD_IN_1 0x4008
+#define LANEN_DIG_ASIC_TX_OVRD_IN_2 0x400c
+
+#define PCIEPHY_RESET_BIT BIT(17)
+#define PCIEPHY_PIPE_LINE0_RESET_BIT BIT(19)
+#define PCIE_TXDETECT_RX_FAIL BIT(2)
+#define PCIE_CLK_SOURCE BIT(8)
+#define PCIE_IS_CLOCK_STABLE BIT(19)
+#define PCIE_PULL_DOWN_PHY_TEST_POWERDOWN BIT(22)
+#define PCIE_DEASSERT_CONTROLLER_PERST BIT(2)
+
+#define EYEPARAM_NOCFG 0xffffffff
+#define EYE_PARM0_MASK GENMASK(8, 6)
+#define EYE_PARM1_MASK GENMASK(11, 8)
+#define EYE_PARM2_MASK GENMASK(5, 0)
+#define EYE_PARM3_MASK GENMASK(12, 7)
+#define EYE_PARM4_MASK GENMASK(14, 9)
+#define EYE_PARM0_EN BIT(9)
+#define EYE_PARM1_EN BIT(12)
+#define EYE_PARM2_EN BIT(6)
+#define EYE_PARM3_EN BIT(13)
+#define EYE_PARM4_EN BIT(15)
+
+/* hi3670 pciephy register */
+#define APB_PHY_START_ADDR 0x40000
+#define SOC_PCIEPHY_MMC1PLL_CTRL1 0xc04
+#define SOC_PCIEPHY_MMC1PLL_CTRL16 0xC40
+#define SOC_PCIEPHY_MMC1PLL_CTRL17 0xC44
+#define SOC_PCIEPHY_MMC1PLL_CTRL20 0xC50
+#define SOC_PCIEPHY_MMC1PLL_CTRL21 0xC54
+#define SOC_PCIEPHY_MMC1PLL_STAT0 0xE00
+
+#define CRGPERIPH_PEREN12 0x470
+#define CRGPERIPH_PERDIS12 0x474
+#define CRGPERIPH_PCIECTRL0 0x800
+
+#define PCIE_FNPLL_FBDIV_MASK GENMASK(27, 16)
+#define PCIE_FNPLL_FRACDIV_MASK GENMASK(23, 0)
+#define PCIE_FNPLL_POSTDIV1_MASK GENMASK(10, 8)
+#define PCIE_FNPLL_POSTDIV2_MASK GENMASK(14, 12)
+#define PCIE_FNPLL_PLL_MODE_MASK BIT(25)
+
+#define PCIE_FNPLL_DLL_EN BIT(27)
+#define PCIE_FNPLL_FBDIV 0xd0
+#define PCIE_FNPLL_FRACDIV 0x555555
+#define PCIE_FNPLL_POSTDIV1 0x5
+#define PCIE_FNPLL_POSTDIV2 0x4
+#define PCIE_FNPLL_PLL_MODE 0x0
+
+#define PCIE_PHY_MMC1PLL 0x20
+#define PCIE_PHY_CHOOSE_FNPLL BIT(27)
+#define PCIE_PHY_MMC1PLL_DISABLE BIT(0)
+#define PCIE_PHY_PCIEPL_BP BIT(16)
+
+/* define ie,oe cfg */
+#define IO_OE_HARD_GT_MODE BIT(1)
+#define IO_IE_EN_HARD_BYPASS BIT(27)
+#define IO_OE_EN_HARD_BYPASS BIT(11)
+#define IO_HARD_CTRL_DEBOUNCE_BYPASS BIT(10)
+#define IO_OE_GT_MODE BIT(8)
+#define DEBOUNCE_WAITCFG_IN GENMASK(23, 20)
+#define DEBOUNCE_WAITCFG_OUT GENMASK(16, 13)
+
+#define IO_HP_DEBOUNCE_GT (BIT(12) | BIT(15))
+#define IO_PHYREF_SOFT_GT_MODE BIT(14)
+#define IO_REF_SOFT_GT_MODE BIT(13)
+#define IO_REF_HARD_GT_MODE BIT(0)
+
+/* noc power domain */
+#define NOC_POWER_IDLEREQ_1 0x38c
+#define NOC_POWER_IDLE_1 0x394
+#define NOC_PW_MASK 0x10000
+#define NOC_PW_SET_BIT 0x1
+
+#define NUM_EYEPARAM 5
+
+/* info located in sysctrl */
+#define SCTRL_PCIE_CMOS_OFFSET 0x60
+#define SCTRL_PCIE_CMOS_BIT 0x10
+#define SCTRL_PCIE_ISO_OFFSET 0x44
+#define SCTRL_PCIE_ISO_BIT 0x30
+#define SCTRL_PCIE_HPCLK_OFFSET 0x190
+#define SCTRL_PCIE_HPCLK_BIT 0x184000
+#define SCTRL_PCIE_OE_OFFSET 0x14a
+#define PCIE_DEBOUNCE_PARAM 0xf0f400
+#define PCIE_OE_BYPASS GENMASK(29, 28)
+
+/* peri_crg ctrl */
+#define CRGCTRL_PCIE_ASSERT_OFFSET 0x88
+#define CRGCTRL_PCIE_ASSERT_BIT 0x8c000000
+
+#define FNPLL_HAS_LOCKED BIT(4)
+
+/* Time for delay */
+#define TIME_CMOS_MIN 100
+#define TIME_CMOS_MAX 105
+#define PIPE_CLK_STABLE_TIME 100
+#define PLL_CTRL_WAIT_TIME 200
+#define NOC_POWER_TIME 100
+
+struct hi3670_pcie_phy {
+ struct device *dev;
+ void __iomem *base;
+ struct regmap *apb;
+ struct regmap *crgctrl;
+ struct regmap *sysctrl;
+ struct regmap *pmctrl;
+ struct clk *apb_sys_clk;
+ struct clk *apb_phy_clk;
+ struct clk *phy_ref_clk;
+ struct clk *aclk;
+ struct clk *aux_clk;
+ u32 eye_param[NUM_EYEPARAM];
+};
+
+/* Registers in PCIePHY */
+static inline void hi3670_apb_phy_writel(struct hi3670_pcie_phy *phy, u32 val,
+ u32 reg)
+{
+ writel(val, phy->base + APB_PHY_START_ADDR + reg);
+}
+
+static inline u32 hi3670_apb_phy_readl(struct hi3670_pcie_phy *phy, u32 reg)
+{
+ return readl(phy->base + APB_PHY_START_ADDR + reg);
+}
+
+static inline void hi3670_apb_phy_updatel(struct hi3670_pcie_phy *phy,
+ u32 val, u32 mask, u32 reg)
+{
+ u32 regval;
+
+ regval = hi3670_apb_phy_readl(phy, reg);
+ regval &= ~mask;
+ regval |= val;
+ hi3670_apb_phy_writel(phy, regval, reg);
+}
+
+static inline void kirin_apb_natural_phy_writel(struct hi3670_pcie_phy *phy,
+ u32 val, u32 reg)
+{
+ writel(val, phy->base + reg);
+}
+
+static inline u32 kirin_apb_natural_phy_readl(struct hi3670_pcie_phy *phy,
+ u32 reg)
+{
+ return readl(phy->base + reg);
+}
+
+static void hi3670_pcie_phy_oe_enable(struct hi3670_pcie_phy *phy, bool enable)
+{
+ u32 val;
+
+ regmap_read(phy->sysctrl, SCTRL_PCIE_OE_OFFSET, &val);
+ val |= PCIE_DEBOUNCE_PARAM;
+ if (enable)
+ val &= ~PCIE_OE_BYPASS;
+ else
+ val |= PCIE_OE_BYPASS;
+ regmap_write(phy->sysctrl, SCTRL_PCIE_OE_OFFSET, val);
+}
+
+static void hi3670_pcie_get_eyeparam(struct hi3670_pcie_phy *phy)
+{
+ struct device *dev = phy->dev;
+ struct device_node *np;
+ int ret, i;
+
+ np = dev->of_node;
+
+ ret = of_property_read_u32_array(np, "hisilicon,eye-diagram-param",
+ phy->eye_param, NUM_EYEPARAM);
+ if (!ret)
+ return;
+
+ /* There's no optional eye_param property. Set array to default */
+ for (i = 0; i < NUM_EYEPARAM; i++)
+ phy->eye_param[i] = EYEPARAM_NOCFG;
+}
+
+static void hi3670_pcie_set_eyeparam(struct hi3670_pcie_phy *phy)
+{
+ u32 val;
+
+ val = kirin_apb_natural_phy_readl(phy, RAWLANEN_DIG_PCS_XF_TX_OVRD_IN_1);
+
+ if (phy->eye_param[1] != EYEPARAM_NOCFG) {
+ val &= ~EYE_PARM1_MASK;
+ val |= FIELD_PREP(EYE_PARM1_MASK, phy->eye_param[1]);
+ val |= EYE_PARM1_EN;
+ }
+ kirin_apb_natural_phy_writel(phy, val,
+ RAWLANEN_DIG_PCS_XF_TX_OVRD_IN_1);
+
+ val = kirin_apb_natural_phy_readl(phy, LANEN_DIG_ASIC_TX_OVRD_IN_2);
+ val &= ~(EYE_PARM2_MASK | EYE_PARM3_MASK);
+ if (phy->eye_param[2] != EYEPARAM_NOCFG) {
+ val |= FIELD_PREP(EYE_PARM2_MASK, phy->eye_param[2]);
+ val |= EYE_PARM2_EN;
+ }
+
+ if (phy->eye_param[3] != EYEPARAM_NOCFG) {
+ val |= FIELD_PREP(EYE_PARM3_MASK, phy->eye_param[3]);
+ val |= EYE_PARM3_EN;
+ }
+
+ kirin_apb_natural_phy_writel(phy, val, LANEN_DIG_ASIC_TX_OVRD_IN_2);
+
+ val = kirin_apb_natural_phy_readl(phy, SUP_DIG_LVL_OVRD_IN);
+ if (phy->eye_param[0] != EYEPARAM_NOCFG) {
+ val &= ~EYE_PARM0_MASK;
+ val |= FIELD_PREP(EYE_PARM0_MASK, phy->eye_param[0]);
+ val |= EYE_PARM0_EN;
+ }
+ kirin_apb_natural_phy_writel(phy, val, SUP_DIG_LVL_OVRD_IN);
+
+ val = kirin_apb_natural_phy_readl(phy, LANEN_DIG_ASIC_TX_OVRD_IN_1);
+ if (phy->eye_param[4] != EYEPARAM_NOCFG) {
+ val &= ~EYE_PARM4_MASK;
+ val |= FIELD_PREP(EYE_PARM4_MASK, phy->eye_param[4]);
+ val |= EYE_PARM4_EN;
+ }
+ kirin_apb_natural_phy_writel(phy, val, LANEN_DIG_ASIC_TX_OVRD_IN_1);
+}
+
+static void hi3670_pcie_natural_cfg(struct hi3670_pcie_phy *phy)
+{
+ u32 val;
+
+ /* change 2p mem_ctrl */
+ regmap_write(phy->apb, SOC_PCIECTRL_CTRL20_ADDR,
+ SOC_PCIECTRL_CTRL20_2P_MEM_CTRL);
+
+ regmap_read(phy->apb, SOC_PCIECTRL_CTRL7_ADDR, &val);
+ val |= PCIE_PULL_UP_SYS_AUX_PWR_DET;
+ regmap_write(phy->apb, SOC_PCIECTRL_CTRL7_ADDR, val);
+
+ /* output, pull down */
+ regmap_read(phy->apb, SOC_PCIECTRL_CTRL12_ADDR, &val);
+ val &= ~PCIE_OUTPUT_PULL_BITS;
+ val |= PCIE_OUTPUT_PULL_DOWN;
+ regmap_write(phy->apb, SOC_PCIECTRL_CTRL12_ADDR, val);
+
+ /* Handle phy_reset and lane0_reset to HW */
+ hi3670_apb_phy_updatel(phy, PCIEPHY_RESET_BIT,
+ PCIEPHY_PIPE_LINE0_RESET_BIT | PCIEPHY_RESET_BIT,
+ SOC_PCIEPHY_CTRL1_ADDR);
+
+ /* fix chip bug: TxDetectRx fail */
+ hi3670_apb_phy_updatel(phy, PCIE_TXDETECT_RX_FAIL, PCIE_TXDETECT_RX_FAIL,
+ SOC_PCIEPHY_CTRL38_ADDR);
+}
+
+static void hi3670_pcie_pll_init(struct hi3670_pcie_phy *phy)
+{
+ hi3670_apb_phy_updatel(phy, PCIE_PHY_CHOOSE_FNPLL, PCIE_PHY_CHOOSE_FNPLL,
+ SOC_PCIEPHY_MMC1PLL_CTRL1);
+
+ hi3670_apb_phy_updatel(phy,
+ FIELD_PREP(PCIE_FNPLL_FBDIV_MASK, PCIE_FNPLL_FBDIV),
+ PCIE_FNPLL_FBDIV_MASK,
+ SOC_PCIEPHY_MMC1PLL_CTRL16);
+
+ hi3670_apb_phy_updatel(phy,
+ FIELD_PREP(PCIE_FNPLL_FRACDIV_MASK, PCIE_FNPLL_FRACDIV),
+ PCIE_FNPLL_FRACDIV_MASK, SOC_PCIEPHY_MMC1PLL_CTRL17);
+
+ hi3670_apb_phy_updatel(phy,
+ PCIE_FNPLL_DLL_EN |
+ FIELD_PREP(PCIE_FNPLL_POSTDIV1_MASK, PCIE_FNPLL_POSTDIV1) |
+ FIELD_PREP(PCIE_FNPLL_POSTDIV2_MASK, PCIE_FNPLL_POSTDIV2) |
+ FIELD_PREP(PCIE_FNPLL_PLL_MODE_MASK, PCIE_FNPLL_PLL_MODE),
+ PCIE_FNPLL_POSTDIV1_MASK |
+ PCIE_FNPLL_POSTDIV2_MASK |
+ PCIE_FNPLL_PLL_MODE_MASK | PCIE_FNPLL_DLL_EN,
+ SOC_PCIEPHY_MMC1PLL_CTRL20);
+
+ hi3670_apb_phy_writel(phy, PCIE_PHY_MMC1PLL,
+ SOC_PCIEPHY_MMC1PLL_CTRL21);
+}
+
+static int hi3670_pcie_pll_ctrl(struct hi3670_pcie_phy *phy, bool enable)
+{
+ struct device *dev = phy->dev;
+ u32 val;
+ int time = PLL_CTRL_WAIT_TIME;
+
+ if (enable) {
+ /* pd = 0 */
+ hi3670_apb_phy_updatel(phy, 0, PCIE_PHY_MMC1PLL_DISABLE,
+ SOC_PCIEPHY_MMC1PLL_CTRL16);
+
+ /* choose FNPLL */
+ val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_MMC1PLL_STAT0);
+ while (!(val & FNPLL_HAS_LOCKED)) {
+ if (!time) {
+ dev_err(dev, "wait for pll_lock timeout\n");
+ return -EINVAL;
+ }
+ time--;
+ udelay(1);
+ val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_MMC1PLL_STAT0);
+ }
+
+ hi3670_apb_phy_updatel(phy, 0, PCIE_PHY_PCIEPL_BP,
+ SOC_PCIEPHY_MMC1PLL_CTRL20);
+
+ } else {
+ hi3670_apb_phy_updatel(phy,
+ PCIE_PHY_MMC1PLL_DISABLE,
+ PCIE_PHY_MMC1PLL_DISABLE,
+ SOC_PCIEPHY_MMC1PLL_CTRL16);
+
+ hi3670_apb_phy_updatel(phy, PCIE_PHY_PCIEPL_BP,
+ PCIE_PHY_PCIEPL_BP,
+ SOC_PCIEPHY_MMC1PLL_CTRL20);
+ }
+
+ return 0;
+}
+
+static void hi3670_pcie_hp_debounce_gt(struct hi3670_pcie_phy *phy, bool open)
+{
+ if (open)
+ /* gt_clk_pcie_hp/gt_clk_pcie_debounce open */
+ regmap_write(phy->crgctrl, CRGPERIPH_PEREN12,
+ IO_HP_DEBOUNCE_GT);
+ else
+ /* gt_clk_pcie_hp/gt_clk_pcie_debounce close */
+ regmap_write(phy->crgctrl, CRGPERIPH_PERDIS12,
+ IO_HP_DEBOUNCE_GT);
+}
+
+static void hi3670_pcie_phyref_gt(struct hi3670_pcie_phy *phy, bool open)
+{
+ unsigned int val;
+
+ regmap_read(phy->crgctrl, CRGPERIPH_PCIECTRL0, &val);
+
+ if (open)
+ val &= ~IO_OE_HARD_GT_MODE; /* enable hard gt mode */
+ else
+ val |= IO_OE_HARD_GT_MODE; /* disable hard gt mode */
+
+ regmap_write(phy->crgctrl, CRGPERIPH_PCIECTRL0, val);
+
+ /* disable soft gt mode */
+ regmap_write(phy->crgctrl, CRGPERIPH_PERDIS12, IO_PHYREF_SOFT_GT_MODE);
+}
+
+static void hi3670_pcie_oe_ctrl(struct hi3670_pcie_phy *phy, bool en_flag)
+{
+ unsigned int val;
+
+ regmap_read(phy->crgctrl, CRGPERIPH_PCIECTRL0, &val);
+
+ /* set ie cfg */
+ val |= IO_IE_EN_HARD_BYPASS;
+
+ /* set oe cfg */
+ val &= ~IO_HARD_CTRL_DEBOUNCE_BYPASS;
+
+ /* set phy_debounce in&out time */
+ val |= (DEBOUNCE_WAITCFG_IN | DEBOUNCE_WAITCFG_OUT);
+
+ /* select oe_gt_mode */
+ val |= IO_OE_GT_MODE;
+
+ if (en_flag)
+ val &= ~IO_OE_EN_HARD_BYPASS;
+ else
+ val |= IO_OE_EN_HARD_BYPASS;
+
+ regmap_write(phy->crgctrl, CRGPERIPH_PCIECTRL0, val);
+}
+
+static void hi3670_pcie_ioref_gt(struct hi3670_pcie_phy *phy, bool open)
+{
+ unsigned int val;
+
+ if (open) {
+ regmap_write(phy->apb, SOC_PCIECTRL_CTRL21_ADDR,
+ SOC_PCIECTRL_CTRL21_DEFAULT);
+
+ hi3670_pcie_oe_ctrl(phy, true);
+
+ /* en hard gt mode */
+ regmap_read(phy->crgctrl, CRGPERIPH_PCIECTRL0, &val);
+ val &= ~IO_REF_HARD_GT_MODE;
+ regmap_write(phy->crgctrl, CRGPERIPH_PCIECTRL0, val);
+
+ /* disable soft gt mode */
+ regmap_write(phy->crgctrl, CRGPERIPH_PERDIS12,
+ IO_REF_SOFT_GT_MODE);
+
+ } else {
+ /* disable hard gt mode */
+ regmap_read(phy->crgctrl, CRGPERIPH_PCIECTRL0, &val);
+ val |= IO_REF_HARD_GT_MODE;
+ regmap_write(phy->crgctrl, CRGPERIPH_PCIECTRL0, val);
+
+ /* disable soft gt mode */
+ regmap_write(phy->crgctrl, CRGPERIPH_PERDIS12,
+ IO_REF_SOFT_GT_MODE);
+
+ hi3670_pcie_oe_ctrl(phy, false);
+ }
+}
+
+static int hi3670_pcie_allclk_ctrl(struct hi3670_pcie_phy *phy, bool clk_on)
+{
+ struct device *dev = phy->dev;
+ int ret = 0;
+
+ if (!clk_on)
+ goto close_clocks;
+
+ /* choose 100MHz clk src: Bit[8]==1 pad, Bit[8]==0 pll */
+ hi3670_apb_phy_updatel(phy, 0, PCIE_CLK_SOURCE,
+ SOC_PCIEPHY_CTRL1_ADDR);
+
+ hi3670_pcie_pll_init(phy);
+
+ ret = hi3670_pcie_pll_ctrl(phy, true);
+ if (ret) {
+ dev_err(dev, "Failed to enable pll\n");
+ return -EINVAL;
+ }
+ hi3670_pcie_hp_debounce_gt(phy, true);
+ hi3670_pcie_phyref_gt(phy, true);
+ hi3670_pcie_ioref_gt(phy, true);
+
+ ret = clk_set_rate(phy->aclk, AXI_CLK_FREQ);
+ if (ret) {
+ dev_err(dev, "Failed to set rate\n");
+ goto close_clocks;
+ }
+
+ return 0;
+
+close_clocks:
+ hi3670_pcie_ioref_gt(phy, false);
+ hi3670_pcie_phyref_gt(phy, false);
+ hi3670_pcie_hp_debounce_gt(phy, false);
+
+ hi3670_pcie_pll_ctrl(phy, false);
+
+ return ret;
+}
+
+static bool is_pipe_clk_stable(struct hi3670_pcie_phy *phy)
+{
+ struct device *dev = phy->dev;
+ u32 val;
+ u32 time = PIPE_CLK_STABLE_TIME;
+ u32 pipe_clk_stable = PCIE_IS_CLOCK_STABLE;
+
+ val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_STATE0_ADDR);
+ while (val & pipe_clk_stable) {
+ mdelay(1);
+ if (!time) {
+ dev_err(dev, "PIPE clk is not stable\n");
+ return false;
+ }
+ time--;
+ val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_STATE0_ADDR);
+ }
+
+ return true;
+}
+
+static int hi3670_pcie_noc_power(struct hi3670_pcie_phy *phy, bool enable)
+{
+ struct device *dev = phy->dev;
+ u32 time = NOC_POWER_TIME;
+ unsigned int val = NOC_PW_MASK;
+ int rst;
+
+ if (enable)
+ val = NOC_PW_MASK | NOC_PW_SET_BIT;
+ else
+ val = NOC_PW_MASK;
+ rst = enable ? 1 : 0;
+
+ regmap_write(phy->pmctrl, NOC_POWER_IDLEREQ_1, val);
+
+ time = NOC_POWER_TIME;
+ regmap_read(phy->pmctrl, NOC_POWER_IDLE_1, &val);
+ while ((val & NOC_PW_SET_BIT) != rst) {
+ udelay(10);
+ if (!time) {
+ dev_err(dev, "Failed to reverse noc power-status\n");
+ return -EINVAL;
+ }
+ time--;
+ regmap_read(phy->pmctrl, NOC_POWER_IDLE_1, &val);
+ }
+
+ return 0;
+}
+
+static int hi3670_pcie_get_resources_from_pcie(struct hi3670_pcie_phy *phy)
+{
+ struct device_node *pcie_port;
+ struct device *dev = phy->dev;
+ struct device *pcie_dev;
+
+ pcie_port = of_get_child_by_name(dev->parent->of_node, "pcie");
+ if (!pcie_port) {
+ dev_err(dev, "no pcie node found in %s\n",
+ dev->parent->of_node->full_name);
+ return -ENODEV;
+ }
+
+ pcie_dev = bus_find_device_by_of_node(&platform_bus_type, pcie_port);
+ if (!pcie_dev) {
+ dev_err(dev, "Didn't find pcie device\n");
+ return -ENODEV;
+ }
+
+ /*
+ * We might just use NULL instead of the APB name, as the
+ * pcie-kirin currently registers directly just one regmap (although
+ * the DWC driver register other regmaps).
+ *
+ * Yet, it sounds safer to warrant that it will be accessing the
+ * right regmap. So, let's use the named version.
+ */
+ phy->apb = dev_get_regmap(pcie_dev, "kirin_pcie_apb");
+ if (!phy->apb) {
+ dev_err(dev, "Failed to get APB regmap\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static int kirin_pcie_clk_ctrl(struct hi3670_pcie_phy *phy, bool enable)
+{
+ int ret = 0;
+
+ if (!enable)
+ goto close_clk;
+
+ ret = clk_set_rate(phy->phy_ref_clk, REF_CLK_FREQ);
+ if (ret)
+ return ret;
+
+ ret = clk_prepare_enable(phy->phy_ref_clk);
+ if (ret)
+ return ret;
+
+ ret = clk_prepare_enable(phy->apb_sys_clk);
+ if (ret)
+ goto apb_sys_fail;
+
+ ret = clk_prepare_enable(phy->apb_phy_clk);
+ if (ret)
+ goto apb_phy_fail;
+
+ ret = clk_prepare_enable(phy->aclk);
+ if (ret)
+ goto aclk_fail;
+
+ ret = clk_prepare_enable(phy->aux_clk);
+ if (ret)
+ goto aux_clk_fail;
+
+ return 0;
+
+close_clk:
+ clk_disable_unprepare(phy->aux_clk);
+aux_clk_fail:
+ clk_disable_unprepare(phy->aclk);
+aclk_fail:
+ clk_disable_unprepare(phy->apb_phy_clk);
+apb_phy_fail:
+ clk_disable_unprepare(phy->apb_sys_clk);
+apb_sys_fail:
+ clk_disable_unprepare(phy->phy_ref_clk);
+
+ return ret;
+}
+
+static int hi3670_pcie_phy_init(struct phy *generic_phy)
+{
+ struct hi3670_pcie_phy *phy = phy_get_drvdata(generic_phy);
+ int ret;
+
+ /*
+ * The code under hi3670_pcie_get_resources_from_pcie() need to
+ * access the reset-gpios and the APB registers, both from the
+ * pcie-kirin driver.
+ *
+ * The APB is obtained via the pcie driver's regmap
+ * Such kind of resource can only be obtained during the PCIe
+ * power_on sequence, as the code inside pcie-kirin needs to
+ * be already probed, as it needs to register the APB regmap.
+ */
+
+ ret = hi3670_pcie_get_resources_from_pcie(phy);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int hi3670_pcie_phy_power_on(struct phy *generic_phy)
+{
+ struct hi3670_pcie_phy *phy = phy_get_drvdata(generic_phy);
+ int val, ret;
+
+ /* Power supply for Host */
+ regmap_write(phy->sysctrl, SCTRL_PCIE_CMOS_OFFSET, SCTRL_PCIE_CMOS_BIT);
+ usleep_range(TIME_CMOS_MIN, TIME_CMOS_MAX);
+
+ hi3670_pcie_phy_oe_enable(phy, true);
+
+ ret = kirin_pcie_clk_ctrl(phy, true);
+ if (ret)
+ return ret;
+
+ /* ISO disable, PCIeCtrl, PHY assert and clk gate clear */
+ regmap_write(phy->sysctrl, SCTRL_PCIE_ISO_OFFSET, SCTRL_PCIE_ISO_BIT);
+ regmap_write(phy->crgctrl, CRGCTRL_PCIE_ASSERT_OFFSET,
+ CRGCTRL_PCIE_ASSERT_BIT);
+ regmap_write(phy->sysctrl, SCTRL_PCIE_HPCLK_OFFSET,
+ SCTRL_PCIE_HPCLK_BIT);
+
+ hi3670_pcie_natural_cfg(phy);
+
+ ret = hi3670_pcie_allclk_ctrl(phy, true);
+ if (ret)
+ goto disable_clks;
+
+ /* pull down phy_test_powerdown signal */
+ hi3670_apb_phy_updatel(phy, 0, PCIE_PULL_DOWN_PHY_TEST_POWERDOWN,
+ SOC_PCIEPHY_CTRL0_ADDR);
+
+ /* deassert controller perst_n */
+ regmap_read(phy->apb, SOC_PCIECTRL_CTRL12_ADDR, &val);
+ val |= PCIE_DEASSERT_CONTROLLER_PERST;
+ regmap_write(phy->apb, SOC_PCIECTRL_CTRL12_ADDR, val);
+ udelay(10);
+
+ ret = is_pipe_clk_stable(phy);
+ if (!ret)
+ goto disable_clks;
+
+ hi3670_pcie_set_eyeparam(phy);
+
+ ret = hi3670_pcie_noc_power(phy, false);
+ if (ret)
+ goto disable_clks;
+
+ return 0;
+
+disable_clks:
+ kirin_pcie_clk_ctrl(phy, false);
+ return ret;
+}
+
+static int hi3670_pcie_phy_power_off(struct phy *generic_phy)
+{
+ struct hi3670_pcie_phy *phy = phy_get_drvdata(generic_phy);
+
+ hi3670_pcie_phy_oe_enable(phy, false);
+
+ hi3670_pcie_allclk_ctrl(phy, false);
+
+ /* Drop power supply for Host */
+ regmap_write(phy->sysctrl, SCTRL_PCIE_CMOS_OFFSET, 0);
+
+ /*
+ * FIXME: The enabled clocks should be disabled here by calling
+ * kirin_pcie_clk_ctrl(phy, false);
+ * However, some clocks used at Kirin 970 should be marked as
+ * CLK_IS_CRITICAL at clk-hi3670 driver, as powering such clocks off
+ * cause an Asynchronous SError interrupt, which produces panic().
+ * While clk-hi3670 is not fixed, we cannot risk disabling clocks here.
+ */
+
+ return 0;
+}
+
+static const struct phy_ops hi3670_phy_ops = {
+ .init = hi3670_pcie_phy_init,
+ .power_on = hi3670_pcie_phy_power_on,
+ .power_off = hi3670_pcie_phy_power_off,
+ .owner = THIS_MODULE,
+};
+
+static int hi3670_pcie_phy_get_resources(struct hi3670_pcie_phy *phy,
+ struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+
+ /* syscon */
+ phy->crgctrl = syscon_regmap_lookup_by_compatible("hisilicon,hi3670-crgctrl");
+ if (IS_ERR(phy->crgctrl))
+ return PTR_ERR(phy->crgctrl);
+
+ phy->sysctrl = syscon_regmap_lookup_by_compatible("hisilicon,hi3670-sctrl");
+ if (IS_ERR(phy->sysctrl))
+ return PTR_ERR(phy->sysctrl);
+
+ phy->pmctrl = syscon_regmap_lookup_by_compatible("hisilicon,hi3670-pmctrl");
+ if (IS_ERR(phy->pmctrl))
+ return PTR_ERR(phy->pmctrl);
+
+ /* clocks */
+ phy->phy_ref_clk = devm_clk_get(dev, "phy_ref");
+ if (IS_ERR(phy->phy_ref_clk))
+ return PTR_ERR(phy->phy_ref_clk);
+
+ phy->aux_clk = devm_clk_get(dev, "aux");
+ if (IS_ERR(phy->aux_clk))
+ return PTR_ERR(phy->aux_clk);
+
+ phy->apb_phy_clk = devm_clk_get(dev, "apb_phy");
+ if (IS_ERR(phy->apb_phy_clk))
+ return PTR_ERR(phy->apb_phy_clk);
+
+ phy->apb_sys_clk = devm_clk_get(dev, "apb_sys");
+ if (IS_ERR(phy->apb_sys_clk))
+ return PTR_ERR(phy->apb_sys_clk);
+
+ phy->aclk = devm_clk_get(dev, "aclk");
+ if (IS_ERR(phy->aclk))
+ return PTR_ERR(phy->aclk);
+
+ /* registers */
+ phy->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(phy->base))
+ return PTR_ERR(phy->base);
+
+ hi3670_pcie_get_eyeparam(phy);
+
+ return 0;
+}
+
+static int hi3670_pcie_phy_probe(struct platform_device *pdev)
+{
+ struct phy_provider *phy_provider;
+ struct device *dev = &pdev->dev;
+ struct hi3670_pcie_phy *phy;
+ struct phy *generic_phy;
+ int ret;
+
+ phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
+ if (!phy)
+ return -ENOMEM;
+
+ phy->dev = dev;
+
+ ret = hi3670_pcie_phy_get_resources(phy, pdev);
+ if (ret)
+ return ret;
+
+ generic_phy = devm_phy_create(dev, dev->of_node, &hi3670_phy_ops);
+ if (IS_ERR(generic_phy)) {
+ dev_err(dev, "failed to create PHY\n");
+ return PTR_ERR(generic_phy);
+ }
+
+ phy_set_drvdata(generic_phy, phy);
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+ return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id hi3670_pcie_phy_match[] = {
+ {
+ .compatible = "hisilicon,hi970-pcie-phy",
+ },
+ {},
+};
+
+static struct platform_driver hi3670_pcie_phy_driver = {
+ .probe = hi3670_pcie_phy_probe,
+ .driver = {
+ .of_match_table = hi3670_pcie_phy_match,
+ .name = "hi3670_pcie_phy",
+ .suppress_bind_attrs = true,
+ }
+};
+builtin_platform_driver(hi3670_pcie_phy_driver);
+
+MODULE_DEVICE_TABLE(of, hi3670_pcie_phy_match);
+MODULE_DESCRIPTION("PCIe phy driver for Kirin 970");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@kernel.org>");
+MODULE_AUTHOR("Manivannan Sadhasivam <mani@kernel.org>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/hisilicon/phy-hi3670-usb3.c b/drivers/phy/hisilicon/phy-hi3670-usb3.c
new file mode 100644
index 0000000000..40d3cf128b
--- /dev/null
+++ b/drivers/phy/hisilicon/phy-hi3670-usb3.c
@@ -0,0 +1,662 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Phy provider for USB 3.1 controller on HiSilicon Kirin970 platform
+ *
+ * Copyright (C) 2017-2020 Hilisicon Electronics Co., Ltd.
+ * http://www.huawei.com
+ *
+ * Authors: Yu Chen <chenyu56@huawei.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define SCTRL_SCDEEPSLEEPED (0x0)
+#define USB_CLK_SELECTED BIT(20)
+
+#define PERI_CRG_PEREN0 (0x00)
+#define PERI_CRG_PERDIS0 (0x04)
+#define PERI_CRG_PEREN4 (0x40)
+#define PERI_CRG_PERDIS4 (0x44)
+#define PERI_CRG_PERRSTEN4 (0x90)
+#define PERI_CRG_PERRSTDIS4 (0x94)
+#define PERI_CRG_ISODIS (0x148)
+#define PERI_CRG_PEREN6 (0x410)
+#define PERI_CRG_PERDIS6 (0x414)
+
+#define USB_REFCLK_ISO_EN BIT(25)
+
+#define GT_CLK_USB2PHY_REF BIT(19)
+
+#define PCTRL_PERI_CTRL3 (0x10)
+#define PCTRL_PERI_CTRL3_MSK_START (16)
+#define USB_TCXO_EN BIT(1)
+
+#define PCTRL_PERI_CTRL24 (0x64)
+#define SC_CLK_USB3PHY_3MUX1_SEL BIT(25)
+
+#define USB3OTG_CTRL0 (0x00)
+#define USB3OTG_CTRL3 (0x0c)
+#define USB3OTG_CTRL4 (0x10)
+#define USB3OTG_CTRL5 (0x14)
+#define USB3OTG_CTRL7 (0x1c)
+#define USB_MISC_CFG50 (0x50)
+#define USB_MISC_CFG54 (0x54)
+#define USB_MISC_CFG58 (0x58)
+#define USB_MISC_CFG5C (0x5c)
+#define USB_MISC_CFGA0 (0xa0)
+#define TCA_CLK_RST (0x200)
+#define TCA_INTR_EN (0x204)
+#define TCA_INTR_STS (0x208)
+#define TCA_GCFG (0x210)
+#define TCA_TCPC (0x214)
+#define TCA_SYSMODE_CFG (0x218)
+#define TCA_VBUS_CTRL (0x240)
+
+#define CTRL0_USB3_VBUSVLD BIT(7)
+#define CTRL0_USB3_VBUSVLD_SEL BIT(6)
+
+#define CTRL3_USB2_VBUSVLDEXT0 BIT(6)
+#define CTRL3_USB2_VBUSVLDEXTSEL0 BIT(5)
+
+#define CTRL5_USB2_SIDDQ BIT(0)
+
+#define CTRL7_USB2_REFCLKSEL_MASK GENMASK(4, 3)
+#define CTRL7_USB2_REFCLKSEL_ABB (BIT(4) | BIT(3))
+#define CTRL7_USB2_REFCLKSEL_PAD BIT(4)
+
+#define CFG50_USB3_PHY_TEST_POWERDOWN BIT(23)
+
+#define CFG54_USB31PHY_CR_ADDR_MASK GENMASK(31, 16)
+
+#define CFG54_USB3PHY_REF_USE_PAD BIT(12)
+#define CFG54_PHY0_PMA_PWR_STABLE BIT(11)
+#define CFG54_PHY0_PCS_PWR_STABLE BIT(9)
+#define CFG54_USB31PHY_CR_ACK BIT(7)
+#define CFG54_USB31PHY_CR_WR_EN BIT(5)
+#define CFG54_USB31PHY_CR_SEL BIT(4)
+#define CFG54_USB31PHY_CR_RD_EN BIT(3)
+#define CFG54_USB31PHY_CR_CLK BIT(2)
+#define CFG54_USB3_PHY0_ANA_PWR_EN BIT(1)
+
+#define CFG58_USB31PHY_CR_DATA_MASK GENMASK(31, 16)
+
+#define CFG5C_USB3_PHY0_SS_MPLLA_SSC_EN BIT(1)
+
+#define CFGA0_VAUX_RESET BIT(9)
+#define CFGA0_USB31C_RESET BIT(8)
+#define CFGA0_USB2PHY_REFCLK_SELECT BIT(4)
+#define CFGA0_USB3PHY_RESET BIT(1)
+#define CFGA0_USB2PHY_POR BIT(0)
+
+#define INTR_EN_XA_TIMEOUT_EVT_EN BIT(1)
+#define INTR_EN_XA_ACK_EVT_EN BIT(0)
+
+#define CLK_RST_TCA_REF_CLK_EN BIT(1)
+#define CLK_RST_SUSPEND_CLK_EN BIT(0)
+
+#define GCFG_ROLE_HSTDEV BIT(4)
+#define GCFG_OP_MODE GENMASK(1, 0)
+#define GCFG_OP_MODE_CTRL_SYNC_MODE BIT(0)
+
+#define TCPC_VALID BIT(4)
+#define TCPC_LOW_POWER_EN BIT(3)
+#define TCPC_MUX_CONTROL_MASK GENMASK(1, 0)
+#define TCPC_MUX_CONTROL_USB31 BIT(0)
+
+#define SYSMODE_CFG_TYPEC_DISABLE BIT(3)
+
+#define VBUS_CTRL_POWERPRESENT_OVERRD GENMASK(3, 2)
+#define VBUS_CTRL_VBUSVALID_OVERRD GENMASK(1, 0)
+
+#define KIRIN970_USB_DEFAULT_PHY_PARAM (0xfdfee4)
+#define KIRIN970_USB_DEFAULT_PHY_VBOOST (0x5)
+
+#define TX_VBOOST_LVL_REG (0xf)
+#define TX_VBOOST_LVL_START (6)
+#define TX_VBOOST_LVL_ENABLE BIT(9)
+
+struct hi3670_priv {
+ struct device *dev;
+ struct regmap *peri_crg;
+ struct regmap *pctrl;
+ struct regmap *sctrl;
+ struct regmap *usb31misc;
+
+ u32 eye_diagram_param;
+ u32 tx_vboost_lvl;
+
+ u32 peri_crg_offset;
+ u32 pctrl_offset;
+ u32 usb31misc_offset;
+};
+
+static int hi3670_phy_cr_clk(struct regmap *usb31misc)
+{
+ int ret;
+
+ /* Clock up */
+ ret = regmap_update_bits(usb31misc, USB_MISC_CFG54,
+ CFG54_USB31PHY_CR_CLK, CFG54_USB31PHY_CR_CLK);
+ if (ret)
+ return ret;
+
+ /* Clock down */
+ return regmap_update_bits(usb31misc, USB_MISC_CFG54,
+ CFG54_USB31PHY_CR_CLK, 0);
+}
+
+static int hi3670_phy_cr_set_sel(struct regmap *usb31misc)
+{
+ return regmap_update_bits(usb31misc, USB_MISC_CFG54,
+ CFG54_USB31PHY_CR_SEL, CFG54_USB31PHY_CR_SEL);
+}
+
+static int hi3670_phy_cr_start(struct regmap *usb31misc, int direction)
+{
+ int ret, reg;
+
+ if (direction)
+ reg = CFG54_USB31PHY_CR_WR_EN;
+ else
+ reg = CFG54_USB31PHY_CR_RD_EN;
+
+ ret = regmap_update_bits(usb31misc, USB_MISC_CFG54, reg, reg);
+
+ if (ret)
+ return ret;
+
+ ret = hi3670_phy_cr_clk(usb31misc);
+ if (ret)
+ return ret;
+
+ return regmap_update_bits(usb31misc, USB_MISC_CFG54,
+ CFG54_USB31PHY_CR_RD_EN | CFG54_USB31PHY_CR_WR_EN, 0);
+}
+
+static int hi3670_phy_cr_wait_ack(struct regmap *usb31misc)
+{
+ u32 reg;
+ int retry = 10;
+ int ret;
+
+ while (retry-- > 0) {
+ ret = regmap_read(usb31misc, USB_MISC_CFG54, &reg);
+ if (ret)
+ return ret;
+ if ((reg & CFG54_USB31PHY_CR_ACK) == CFG54_USB31PHY_CR_ACK)
+ return 0;
+
+ ret = hi3670_phy_cr_clk(usb31misc);
+ if (ret)
+ return ret;
+
+ usleep_range(10, 20);
+ }
+
+ return -ETIMEDOUT;
+}
+
+static int hi3670_phy_cr_set_addr(struct regmap *usb31misc, u32 addr)
+{
+ u32 reg;
+ int ret;
+
+ ret = regmap_read(usb31misc, USB_MISC_CFG54, &reg);
+ if (ret)
+ return ret;
+
+ reg = FIELD_PREP(CFG54_USB31PHY_CR_ADDR_MASK, addr);
+
+ return regmap_update_bits(usb31misc, USB_MISC_CFG54,
+ CFG54_USB31PHY_CR_ADDR_MASK, reg);
+}
+
+static int hi3670_phy_cr_read(struct regmap *usb31misc, u32 addr, u32 *val)
+{
+ int reg, i, ret;
+
+ for (i = 0; i < 100; i++) {
+ ret = hi3670_phy_cr_clk(usb31misc);
+ if (ret)
+ return ret;
+ }
+
+ ret = hi3670_phy_cr_set_sel(usb31misc);
+ if (ret)
+ return ret;
+
+ ret = hi3670_phy_cr_set_addr(usb31misc, addr);
+ if (ret)
+ return ret;
+
+ ret = hi3670_phy_cr_start(usb31misc, 0);
+ if (ret)
+ return ret;
+
+ ret = hi3670_phy_cr_wait_ack(usb31misc);
+ if (ret)
+ return ret;
+
+ ret = regmap_read(usb31misc, USB_MISC_CFG58, &reg);
+ if (ret)
+ return ret;
+
+ *val = FIELD_GET(CFG58_USB31PHY_CR_DATA_MASK, reg);
+
+ return 0;
+}
+
+static int hi3670_phy_cr_write(struct regmap *usb31misc, u32 addr, u32 val)
+{
+ int i;
+ int ret;
+
+ for (i = 0; i < 100; i++) {
+ ret = hi3670_phy_cr_clk(usb31misc);
+ if (ret)
+ return ret;
+ }
+
+ ret = hi3670_phy_cr_set_sel(usb31misc);
+ if (ret)
+ return ret;
+
+ ret = hi3670_phy_cr_set_addr(usb31misc, addr);
+ if (ret)
+ return ret;
+
+ ret = regmap_write(usb31misc, USB_MISC_CFG58,
+ FIELD_PREP(CFG58_USB31PHY_CR_DATA_MASK, val));
+ if (ret)
+ return ret;
+
+ ret = hi3670_phy_cr_start(usb31misc, 1);
+ if (ret)
+ return ret;
+
+ return hi3670_phy_cr_wait_ack(usb31misc);
+}
+
+static int hi3670_phy_set_params(struct hi3670_priv *priv)
+{
+ u32 reg;
+ int ret;
+ int retry = 3;
+
+ ret = regmap_write(priv->usb31misc, USB3OTG_CTRL4,
+ priv->eye_diagram_param);
+ if (ret) {
+ dev_err(priv->dev, "set USB3OTG_CTRL4 failed\n");
+ return ret;
+ }
+
+ while (retry-- > 0) {
+ ret = hi3670_phy_cr_read(priv->usb31misc,
+ TX_VBOOST_LVL_REG, &reg);
+ if (!ret)
+ break;
+
+ if (ret != -ETIMEDOUT) {
+ dev_err(priv->dev, "read TX_VBOOST_LVL_REG failed\n");
+ return ret;
+ }
+ }
+ if (ret)
+ return ret;
+
+ reg |= (TX_VBOOST_LVL_ENABLE | (priv->tx_vboost_lvl << TX_VBOOST_LVL_START));
+ ret = hi3670_phy_cr_write(priv->usb31misc, TX_VBOOST_LVL_REG, reg);
+ if (ret)
+ dev_err(priv->dev, "write TX_VBOOST_LVL_REG failed\n");
+
+ return ret;
+}
+
+static bool hi3670_is_abbclk_selected(struct hi3670_priv *priv)
+{
+ u32 reg;
+
+ if (!priv->sctrl) {
+ dev_err(priv->dev, "priv->sctrl is null!\n");
+ return false;
+ }
+
+ if (regmap_read(priv->sctrl, SCTRL_SCDEEPSLEEPED, &reg)) {
+ dev_err(priv->dev, "SCTRL_SCDEEPSLEEPED read failed!\n");
+ return false;
+ }
+
+ if ((reg & USB_CLK_SELECTED) == 0)
+ return false;
+
+ return true;
+}
+
+static int hi3670_config_phy_clock(struct hi3670_priv *priv)
+{
+ u32 val, mask;
+ int ret;
+
+ if (!hi3670_is_abbclk_selected(priv)) {
+ /* usb refclk iso disable */
+ ret = regmap_write(priv->peri_crg, PERI_CRG_ISODIS,
+ USB_REFCLK_ISO_EN);
+ if (ret)
+ goto out;
+
+ /* enable usb_tcxo_en */
+ ret = regmap_write(priv->pctrl, PCTRL_PERI_CTRL3,
+ USB_TCXO_EN |
+ (USB_TCXO_EN << PCTRL_PERI_CTRL3_MSK_START));
+
+ /* select usbphy clk from abb */
+ mask = SC_CLK_USB3PHY_3MUX1_SEL;
+ ret = regmap_update_bits(priv->pctrl,
+ PCTRL_PERI_CTRL24, mask, 0);
+ if (ret)
+ goto out;
+
+ ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFGA0,
+ CFGA0_USB2PHY_REFCLK_SELECT, 0);
+ if (ret)
+ goto out;
+
+ ret = regmap_read(priv->usb31misc, USB3OTG_CTRL7, &val);
+ if (ret)
+ goto out;
+ val &= ~CTRL7_USB2_REFCLKSEL_MASK;
+ val |= CTRL7_USB2_REFCLKSEL_ABB;
+ ret = regmap_write(priv->usb31misc, USB3OTG_CTRL7, val);
+ if (ret)
+ goto out;
+
+ return 0;
+ }
+
+ ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFG54,
+ CFG54_USB3PHY_REF_USE_PAD,
+ CFG54_USB3PHY_REF_USE_PAD);
+ if (ret)
+ goto out;
+
+ ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFGA0,
+ CFGA0_USB2PHY_REFCLK_SELECT,
+ CFGA0_USB2PHY_REFCLK_SELECT);
+ if (ret)
+ goto out;
+
+ ret = regmap_read(priv->usb31misc, USB3OTG_CTRL7, &val);
+ if (ret)
+ goto out;
+ val &= ~CTRL7_USB2_REFCLKSEL_MASK;
+ val |= CTRL7_USB2_REFCLKSEL_PAD;
+ ret = regmap_write(priv->usb31misc, USB3OTG_CTRL7, val);
+ if (ret)
+ goto out;
+
+ ret = regmap_write(priv->peri_crg,
+ PERI_CRG_PEREN6, GT_CLK_USB2PHY_REF);
+ if (ret)
+ goto out;
+
+ return 0;
+out:
+ dev_err(priv->dev, "failed to config phy clock ret: %d\n", ret);
+ return ret;
+}
+
+static int hi3670_config_tca(struct hi3670_priv *priv)
+{
+ u32 val, mask;
+ int ret;
+
+ ret = regmap_write(priv->usb31misc, TCA_INTR_STS, 0xffff);
+ if (ret)
+ goto out;
+
+ ret = regmap_write(priv->usb31misc, TCA_INTR_EN,
+ INTR_EN_XA_TIMEOUT_EVT_EN | INTR_EN_XA_ACK_EVT_EN);
+ if (ret)
+ goto out;
+
+ mask = CLK_RST_TCA_REF_CLK_EN | CLK_RST_SUSPEND_CLK_EN;
+ ret = regmap_update_bits(priv->usb31misc, TCA_CLK_RST, mask, 0);
+ if (ret)
+ goto out;
+
+ ret = regmap_update_bits(priv->usb31misc, TCA_GCFG,
+ GCFG_ROLE_HSTDEV | GCFG_OP_MODE,
+ GCFG_ROLE_HSTDEV | GCFG_OP_MODE_CTRL_SYNC_MODE);
+ if (ret)
+ goto out;
+
+ ret = regmap_update_bits(priv->usb31misc, TCA_SYSMODE_CFG,
+ SYSMODE_CFG_TYPEC_DISABLE, 0);
+ if (ret)
+ goto out;
+
+ ret = regmap_read(priv->usb31misc, TCA_TCPC, &val);
+ if (ret)
+ goto out;
+ val &= ~(TCPC_VALID | TCPC_LOW_POWER_EN | TCPC_MUX_CONTROL_MASK);
+ val |= (TCPC_VALID | TCPC_MUX_CONTROL_USB31);
+ ret = regmap_write(priv->usb31misc, TCA_TCPC, val);
+ if (ret)
+ goto out;
+
+ ret = regmap_write(priv->usb31misc, TCA_VBUS_CTRL,
+ VBUS_CTRL_POWERPRESENT_OVERRD | VBUS_CTRL_VBUSVALID_OVERRD);
+ if (ret)
+ goto out;
+
+ return 0;
+out:
+ dev_err(priv->dev, "failed to config phy clock ret: %d\n", ret);
+ return ret;
+}
+
+static int hi3670_phy_init(struct phy *phy)
+{
+ struct hi3670_priv *priv = phy_get_drvdata(phy);
+ u32 val;
+ int ret;
+
+ /* assert controller */
+ val = CFGA0_VAUX_RESET | CFGA0_USB31C_RESET |
+ CFGA0_USB3PHY_RESET | CFGA0_USB2PHY_POR;
+ ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFGA0, val, 0);
+ if (ret)
+ goto out;
+
+ ret = hi3670_config_phy_clock(priv);
+ if (ret)
+ goto out;
+
+ /* Exit from IDDQ mode */
+ ret = regmap_update_bits(priv->usb31misc, USB3OTG_CTRL5,
+ CTRL5_USB2_SIDDQ, 0);
+ if (ret)
+ goto out;
+
+ /* Release USB31 PHY out of TestPowerDown mode */
+ ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFG50,
+ CFG50_USB3_PHY_TEST_POWERDOWN, 0);
+ if (ret)
+ goto out;
+
+ /* Deassert phy */
+ val = CFGA0_USB3PHY_RESET | CFGA0_USB2PHY_POR;
+ ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFGA0, val, val);
+ if (ret)
+ goto out;
+
+ usleep_range(100, 120);
+
+ /* Tell the PHY power is stable */
+ val = CFG54_USB3_PHY0_ANA_PWR_EN | CFG54_PHY0_PCS_PWR_STABLE |
+ CFG54_PHY0_PMA_PWR_STABLE;
+ ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFG54,
+ val, val);
+ if (ret)
+ goto out;
+
+ ret = hi3670_config_tca(priv);
+ if (ret)
+ goto out;
+
+ /* Enable SSC */
+ ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFG5C,
+ CFG5C_USB3_PHY0_SS_MPLLA_SSC_EN,
+ CFG5C_USB3_PHY0_SS_MPLLA_SSC_EN);
+ if (ret)
+ goto out;
+
+ /* Deassert controller */
+ val = CFGA0_VAUX_RESET | CFGA0_USB31C_RESET;
+ ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFGA0, val, val);
+ if (ret)
+ goto out;
+
+ usleep_range(100, 120);
+
+ /* Set fake vbus valid signal */
+ val = CTRL0_USB3_VBUSVLD | CTRL0_USB3_VBUSVLD_SEL;
+ ret = regmap_update_bits(priv->usb31misc, USB3OTG_CTRL0, val, val);
+ if (ret)
+ goto out;
+
+ val = CTRL3_USB2_VBUSVLDEXT0 | CTRL3_USB2_VBUSVLDEXTSEL0;
+ ret = regmap_update_bits(priv->usb31misc, USB3OTG_CTRL3, val, val);
+ if (ret)
+ goto out;
+
+ usleep_range(100, 120);
+
+ ret = hi3670_phy_set_params(priv);
+ if (ret)
+ goto out;
+
+ return 0;
+out:
+ dev_err(priv->dev, "failed to init phy ret: %d\n", ret);
+ return ret;
+}
+
+static int hi3670_phy_exit(struct phy *phy)
+{
+ struct hi3670_priv *priv = phy_get_drvdata(phy);
+ u32 mask;
+ int ret;
+
+ /* Assert phy */
+ mask = CFGA0_USB3PHY_RESET | CFGA0_USB2PHY_POR;
+ ret = regmap_update_bits(priv->usb31misc, USB_MISC_CFGA0, mask, 0);
+ if (ret)
+ goto out;
+
+ if (!hi3670_is_abbclk_selected(priv)) {
+ /* disable usb_tcxo_en */
+ ret = regmap_write(priv->pctrl, PCTRL_PERI_CTRL3,
+ USB_TCXO_EN << PCTRL_PERI_CTRL3_MSK_START);
+ } else {
+ ret = regmap_write(priv->peri_crg, PERI_CRG_PERDIS6,
+ GT_CLK_USB2PHY_REF);
+ if (ret)
+ goto out;
+ }
+
+ return 0;
+out:
+ dev_err(priv->dev, "failed to exit phy ret: %d\n", ret);
+ return ret;
+}
+
+static const struct phy_ops hi3670_phy_ops = {
+ .init = hi3670_phy_init,
+ .exit = hi3670_phy_exit,
+ .owner = THIS_MODULE,
+};
+
+static int hi3670_phy_probe(struct platform_device *pdev)
+{
+ struct phy_provider *phy_provider;
+ struct device *dev = &pdev->dev;
+ struct phy *phy;
+ struct hi3670_priv *priv;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->dev = dev;
+ priv->peri_crg = syscon_regmap_lookup_by_phandle(dev->of_node,
+ "hisilicon,pericrg-syscon");
+ if (IS_ERR(priv->peri_crg)) {
+ dev_err(dev, "no hisilicon,pericrg-syscon\n");
+ return PTR_ERR(priv->peri_crg);
+ }
+
+ priv->pctrl = syscon_regmap_lookup_by_phandle(dev->of_node,
+ "hisilicon,pctrl-syscon");
+ if (IS_ERR(priv->pctrl)) {
+ dev_err(dev, "no hisilicon,pctrl-syscon\n");
+ return PTR_ERR(priv->pctrl);
+ }
+
+ priv->sctrl = syscon_regmap_lookup_by_phandle(dev->of_node,
+ "hisilicon,sctrl-syscon");
+ if (IS_ERR(priv->sctrl)) {
+ dev_err(dev, "no hisilicon,sctrl-syscon\n");
+ return PTR_ERR(priv->sctrl);
+ }
+
+ /* node of hi3670 phy is a sub-node of usb3_otg_bc */
+ priv->usb31misc = syscon_node_to_regmap(dev->parent->of_node);
+ if (IS_ERR(priv->usb31misc)) {
+ dev_err(dev, "no hisilicon,usb3-otg-bc-syscon\n");
+ return PTR_ERR(priv->usb31misc);
+ }
+
+ if (of_property_read_u32(dev->of_node, "hisilicon,eye-diagram-param",
+ &priv->eye_diagram_param))
+ priv->eye_diagram_param = KIRIN970_USB_DEFAULT_PHY_PARAM;
+
+ if (of_property_read_u32(dev->of_node, "hisilicon,tx-vboost-lvl",
+ &priv->tx_vboost_lvl))
+ priv->tx_vboost_lvl = KIRIN970_USB_DEFAULT_PHY_VBOOST;
+
+ phy = devm_phy_create(dev, NULL, &hi3670_phy_ops);
+ if (IS_ERR(phy))
+ return PTR_ERR(phy);
+
+ phy_set_drvdata(phy, priv);
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+ return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id hi3670_phy_of_match[] = {
+ { .compatible = "hisilicon,hi3670-usb-phy" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, hi3670_phy_of_match);
+
+static struct platform_driver hi3670_phy_driver = {
+ .probe = hi3670_phy_probe,
+ .driver = {
+ .name = "hi3670-usb-phy",
+ .of_match_table = hi3670_phy_of_match,
+ }
+};
+module_platform_driver(hi3670_phy_driver);
+
+MODULE_AUTHOR("Yu Chen <chenyu56@huawei.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Hilisicon Kirin970 USB31 PHY Driver");
diff --git a/drivers/phy/hisilicon/phy-hi6220-usb.c b/drivers/phy/hisilicon/phy-hi6220-usb.c
new file mode 100644
index 0000000000..97bd363dfe
--- /dev/null
+++ b/drivers/phy/hisilicon/phy-hi6220-usb.c
@@ -0,0 +1,165 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2015 Linaro Ltd.
+ * Copyright (c) 2015 HiSilicon Limited.
+ */
+
+#include <linux/mfd/syscon.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/phy/phy.h>
+#include <linux/regmap.h>
+
+#define SC_PERIPH_CTRL4 0x00c
+
+#define CTRL4_PICO_SIDDQ BIT(6)
+#define CTRL4_PICO_OGDISABLE BIT(8)
+#define CTRL4_PICO_VBUSVLDEXT BIT(10)
+#define CTRL4_PICO_VBUSVLDEXTSEL BIT(11)
+#define CTRL4_OTG_PHY_SEL BIT(21)
+
+#define SC_PERIPH_CTRL5 0x010
+
+#define CTRL5_USBOTG_RES_SEL BIT(3)
+#define CTRL5_PICOPHY_ACAENB BIT(4)
+#define CTRL5_PICOPHY_BC_MODE BIT(5)
+#define CTRL5_PICOPHY_CHRGSEL BIT(6)
+#define CTRL5_PICOPHY_VDATSRCEND BIT(7)
+#define CTRL5_PICOPHY_VDATDETENB BIT(8)
+#define CTRL5_PICOPHY_DCDENB BIT(9)
+#define CTRL5_PICOPHY_IDDIG BIT(10)
+
+#define SC_PERIPH_CTRL8 0x018
+#define SC_PERIPH_RSTEN0 0x300
+#define SC_PERIPH_RSTDIS0 0x304
+
+#define RST0_USBOTG_BUS BIT(4)
+#define RST0_POR_PICOPHY BIT(5)
+#define RST0_USBOTG BIT(6)
+#define RST0_USBOTG_32K BIT(7)
+
+#define EYE_PATTERN_PARA 0x7053348c
+
+struct hi6220_priv {
+ struct regmap *reg;
+ struct device *dev;
+};
+
+static void hi6220_phy_init(struct hi6220_priv *priv)
+{
+ struct regmap *reg = priv->reg;
+ u32 val, mask;
+
+ val = RST0_USBOTG_BUS | RST0_POR_PICOPHY |
+ RST0_USBOTG | RST0_USBOTG_32K;
+ mask = val;
+ regmap_update_bits(reg, SC_PERIPH_RSTEN0, mask, val);
+ regmap_update_bits(reg, SC_PERIPH_RSTDIS0, mask, val);
+}
+
+static int hi6220_phy_setup(struct hi6220_priv *priv, bool on)
+{
+ struct regmap *reg = priv->reg;
+ u32 val, mask;
+ int ret;
+
+ if (on) {
+ val = CTRL5_USBOTG_RES_SEL | CTRL5_PICOPHY_ACAENB;
+ mask = val | CTRL5_PICOPHY_BC_MODE;
+ ret = regmap_update_bits(reg, SC_PERIPH_CTRL5, mask, val);
+ if (ret)
+ goto out;
+
+ val = CTRL4_PICO_VBUSVLDEXT | CTRL4_PICO_VBUSVLDEXTSEL |
+ CTRL4_OTG_PHY_SEL;
+ mask = val | CTRL4_PICO_SIDDQ | CTRL4_PICO_OGDISABLE;
+ ret = regmap_update_bits(reg, SC_PERIPH_CTRL4, mask, val);
+ if (ret)
+ goto out;
+
+ ret = regmap_write(reg, SC_PERIPH_CTRL8, EYE_PATTERN_PARA);
+ if (ret)
+ goto out;
+ } else {
+ val = CTRL4_PICO_SIDDQ;
+ mask = val;
+ ret = regmap_update_bits(reg, SC_PERIPH_CTRL4, mask, val);
+ if (ret)
+ goto out;
+ }
+
+ return 0;
+out:
+ dev_err(priv->dev, "failed to setup phy ret: %d\n", ret);
+ return ret;
+}
+
+static int hi6220_phy_start(struct phy *phy)
+{
+ struct hi6220_priv *priv = phy_get_drvdata(phy);
+
+ return hi6220_phy_setup(priv, true);
+}
+
+static int hi6220_phy_exit(struct phy *phy)
+{
+ struct hi6220_priv *priv = phy_get_drvdata(phy);
+
+ return hi6220_phy_setup(priv, false);
+}
+
+static const struct phy_ops hi6220_phy_ops = {
+ .init = hi6220_phy_start,
+ .exit = hi6220_phy_exit,
+ .owner = THIS_MODULE,
+};
+
+static int hi6220_phy_probe(struct platform_device *pdev)
+{
+ struct phy_provider *phy_provider;
+ struct device *dev = &pdev->dev;
+ struct phy *phy;
+ struct hi6220_priv *priv;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->dev = dev;
+ priv->reg = syscon_regmap_lookup_by_phandle(dev->of_node,
+ "hisilicon,peripheral-syscon");
+ if (IS_ERR(priv->reg)) {
+ dev_err(dev, "no hisilicon,peripheral-syscon\n");
+ return PTR_ERR(priv->reg);
+ }
+
+ hi6220_phy_init(priv);
+
+ phy = devm_phy_create(dev, NULL, &hi6220_phy_ops);
+ if (IS_ERR(phy))
+ return PTR_ERR(phy);
+
+ phy_set_drvdata(phy, priv);
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+ return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id hi6220_phy_of_match[] = {
+ {.compatible = "hisilicon,hi6220-usb-phy",},
+ { },
+};
+MODULE_DEVICE_TABLE(of, hi6220_phy_of_match);
+
+static struct platform_driver hi6220_phy_driver = {
+ .probe = hi6220_phy_probe,
+ .driver = {
+ .name = "hi6220-usb-phy",
+ .of_match_table = hi6220_phy_of_match,
+ }
+};
+module_platform_driver(hi6220_phy_driver);
+
+MODULE_DESCRIPTION("HISILICON HI6220 USB PHY driver");
+MODULE_ALIAS("platform:hi6220-usb-phy");
+MODULE_LICENSE("GPL");
diff --git a/drivers/phy/hisilicon/phy-hisi-inno-usb2.c b/drivers/phy/hisilicon/phy-hisi-inno-usb2.c
new file mode 100644
index 0000000000..c138cd4807
--- /dev/null
+++ b/drivers/phy/hisilicon/phy-hisi-inno-usb2.c
@@ -0,0 +1,220 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * HiSilicon INNO USB2 PHY Driver.
+ *
+ * Copyright (c) 2016-2017 HiSilicon Technologies Co., Ltd.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+
+#define INNO_PHY_PORT_NUM 2
+#define REF_CLK_STABLE_TIME 100 /* unit:us */
+#define UTMI_CLK_STABLE_TIME 200 /* unit:us */
+#define TEST_CLK_STABLE_TIME 2 /* unit:ms */
+#define PHY_CLK_STABLE_TIME 2 /* unit:ms */
+#define UTMI_RST_COMPLETE_TIME 2 /* unit:ms */
+#define POR_RST_COMPLETE_TIME 300 /* unit:us */
+
+#define PHY_TYPE_0 0
+#define PHY_TYPE_1 1
+
+#define PHY_TEST_DATA GENMASK(7, 0)
+#define PHY_TEST_ADDR_OFFSET 8
+#define PHY0_TEST_ADDR GENMASK(15, 8)
+#define PHY0_TEST_PORT_OFFSET 16
+#define PHY0_TEST_PORT GENMASK(18, 16)
+#define PHY0_TEST_WREN BIT(21)
+#define PHY0_TEST_CLK BIT(22) /* rising edge active */
+#define PHY0_TEST_RST BIT(23) /* low active */
+#define PHY1_TEST_ADDR GENMASK(11, 8)
+#define PHY1_TEST_PORT_OFFSET 12
+#define PHY1_TEST_PORT BIT(12)
+#define PHY1_TEST_WREN BIT(13)
+#define PHY1_TEST_CLK BIT(14) /* rising edge active */
+#define PHY1_TEST_RST BIT(15) /* low active */
+
+#define PHY_CLK_ENABLE BIT(2)
+
+struct hisi_inno_phy_port {
+ struct reset_control *utmi_rst;
+ struct hisi_inno_phy_priv *priv;
+};
+
+struct hisi_inno_phy_priv {
+ void __iomem *mmio;
+ struct clk *ref_clk;
+ struct reset_control *por_rst;
+ unsigned int type;
+ struct hisi_inno_phy_port ports[INNO_PHY_PORT_NUM];
+};
+
+static void hisi_inno_phy_write_reg(struct hisi_inno_phy_priv *priv,
+ u8 port, u32 addr, u32 data)
+{
+ void __iomem *reg = priv->mmio;
+ u32 val;
+ u32 value;
+
+ if (priv->type == PHY_TYPE_0)
+ val = (data & PHY_TEST_DATA) |
+ ((addr << PHY_TEST_ADDR_OFFSET) & PHY0_TEST_ADDR) |
+ ((port << PHY0_TEST_PORT_OFFSET) & PHY0_TEST_PORT) |
+ PHY0_TEST_WREN | PHY0_TEST_RST;
+ else
+ val = (data & PHY_TEST_DATA) |
+ ((addr << PHY_TEST_ADDR_OFFSET) & PHY1_TEST_ADDR) |
+ ((port << PHY1_TEST_PORT_OFFSET) & PHY1_TEST_PORT) |
+ PHY1_TEST_WREN | PHY1_TEST_RST;
+ writel(val, reg);
+
+ value = val;
+ if (priv->type == PHY_TYPE_0)
+ value |= PHY0_TEST_CLK;
+ else
+ value |= PHY1_TEST_CLK;
+ writel(value, reg);
+
+ writel(val, reg);
+}
+
+static void hisi_inno_phy_setup(struct hisi_inno_phy_priv *priv)
+{
+ /* The phy clk is controlled by the port0 register 0x06. */
+ hisi_inno_phy_write_reg(priv, 0, 0x06, PHY_CLK_ENABLE);
+ msleep(PHY_CLK_STABLE_TIME);
+}
+
+static int hisi_inno_phy_init(struct phy *phy)
+{
+ struct hisi_inno_phy_port *port = phy_get_drvdata(phy);
+ struct hisi_inno_phy_priv *priv = port->priv;
+ int ret;
+
+ ret = clk_prepare_enable(priv->ref_clk);
+ if (ret)
+ return ret;
+ udelay(REF_CLK_STABLE_TIME);
+
+ reset_control_deassert(priv->por_rst);
+ udelay(POR_RST_COMPLETE_TIME);
+
+ /* Set up phy registers */
+ hisi_inno_phy_setup(priv);
+
+ reset_control_deassert(port->utmi_rst);
+ udelay(UTMI_RST_COMPLETE_TIME);
+
+ return 0;
+}
+
+static int hisi_inno_phy_exit(struct phy *phy)
+{
+ struct hisi_inno_phy_port *port = phy_get_drvdata(phy);
+ struct hisi_inno_phy_priv *priv = port->priv;
+
+ reset_control_assert(port->utmi_rst);
+ reset_control_assert(priv->por_rst);
+ clk_disable_unprepare(priv->ref_clk);
+
+ return 0;
+}
+
+static const struct phy_ops hisi_inno_phy_ops = {
+ .init = hisi_inno_phy_init,
+ .exit = hisi_inno_phy_exit,
+ .owner = THIS_MODULE,
+};
+
+static int hisi_inno_phy_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ struct hisi_inno_phy_priv *priv;
+ struct phy_provider *provider;
+ struct device_node *child;
+ int i = 0;
+ int ret;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->mmio = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(priv->mmio)) {
+ ret = PTR_ERR(priv->mmio);
+ return ret;
+ }
+
+ priv->ref_clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(priv->ref_clk))
+ return PTR_ERR(priv->ref_clk);
+
+ priv->por_rst = devm_reset_control_get_exclusive(dev, NULL);
+ if (IS_ERR(priv->por_rst))
+ return PTR_ERR(priv->por_rst);
+
+ priv->type = (uintptr_t) of_device_get_match_data(dev);
+
+ for_each_child_of_node(np, child) {
+ struct reset_control *rst;
+ struct phy *phy;
+
+ rst = of_reset_control_get_exclusive(child, NULL);
+ if (IS_ERR(rst)) {
+ of_node_put(child);
+ return PTR_ERR(rst);
+ }
+
+ priv->ports[i].utmi_rst = rst;
+ priv->ports[i].priv = priv;
+
+ phy = devm_phy_create(dev, child, &hisi_inno_phy_ops);
+ if (IS_ERR(phy)) {
+ of_node_put(child);
+ return PTR_ERR(phy);
+ }
+
+ phy_set_bus_width(phy, 8);
+ phy_set_drvdata(phy, &priv->ports[i]);
+ i++;
+
+ if (i >= INNO_PHY_PORT_NUM) {
+ dev_warn(dev, "Support %d ports in maximum\n", i);
+ of_node_put(child);
+ break;
+ }
+ }
+
+ provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+ return PTR_ERR_OR_ZERO(provider);
+}
+
+static const struct of_device_id hisi_inno_phy_of_match[] = {
+ { .compatible = "hisilicon,inno-usb2-phy",
+ .data = (void *) PHY_TYPE_0 },
+ { .compatible = "hisilicon,hi3798cv200-usb2-phy",
+ .data = (void *) PHY_TYPE_0 },
+ { .compatible = "hisilicon,hi3798mv100-usb2-phy",
+ .data = (void *) PHY_TYPE_1 },
+ { },
+};
+MODULE_DEVICE_TABLE(of, hisi_inno_phy_of_match);
+
+static struct platform_driver hisi_inno_phy_driver = {
+ .probe = hisi_inno_phy_probe,
+ .driver = {
+ .name = "hisi-inno-phy",
+ .of_match_table = hisi_inno_phy_of_match,
+ }
+};
+module_platform_driver(hisi_inno_phy_driver);
+
+MODULE_DESCRIPTION("HiSilicon INNO USB2 PHY Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/hisilicon/phy-histb-combphy.c b/drivers/phy/hisilicon/phy-histb-combphy.c
new file mode 100644
index 0000000000..c44588fd5a
--- /dev/null
+++ b/drivers/phy/hisilicon/phy-histb-combphy.c
@@ -0,0 +1,285 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * COMBPHY driver for HiSilicon STB SoCs
+ *
+ * Copyright (C) 2016-2017 HiSilicon Co., Ltd. http://www.hisilicon.com
+ *
+ * Authors: Jianguo Sun <sunjianguo1@huawei.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include <dt-bindings/phy/phy.h>
+
+#define COMBPHY_MODE_PCIE 0
+#define COMBPHY_MODE_USB3 1
+#define COMBPHY_MODE_SATA 2
+
+#define COMBPHY_CFG_REG 0x0
+#define COMBPHY_BYPASS_CODEC BIT(31)
+#define COMBPHY_TEST_WRITE BIT(24)
+#define COMBPHY_TEST_DATA_SHIFT 20
+#define COMBPHY_TEST_DATA_MASK GENMASK(23, 20)
+#define COMBPHY_TEST_ADDR_SHIFT 12
+#define COMBPHY_TEST_ADDR_MASK GENMASK(16, 12)
+#define COMBPHY_CLKREF_OUT_OEN BIT(0)
+
+struct histb_combphy_mode {
+ int fixed;
+ int select;
+ u32 reg;
+ u32 shift;
+ u32 mask;
+};
+
+struct histb_combphy_priv {
+ void __iomem *mmio;
+ struct regmap *syscon;
+ struct reset_control *por_rst;
+ struct clk *ref_clk;
+ struct phy *phy;
+ struct histb_combphy_mode mode;
+};
+
+static void nano_register_write(struct histb_combphy_priv *priv,
+ u32 addr, u32 data)
+{
+ void __iomem *reg = priv->mmio + COMBPHY_CFG_REG;
+ u32 val;
+
+ /* Set up address and data for the write */
+ val = readl(reg);
+ val &= ~COMBPHY_TEST_ADDR_MASK;
+ val |= addr << COMBPHY_TEST_ADDR_SHIFT;
+ val &= ~COMBPHY_TEST_DATA_MASK;
+ val |= data << COMBPHY_TEST_DATA_SHIFT;
+ writel(val, reg);
+
+ /* Flip strobe control to trigger the write */
+ val &= ~COMBPHY_TEST_WRITE;
+ writel(val, reg);
+ val |= COMBPHY_TEST_WRITE;
+ writel(val, reg);
+}
+
+static int is_mode_fixed(struct histb_combphy_mode *mode)
+{
+ return (mode->fixed != PHY_NONE) ? true : false;
+}
+
+static int histb_combphy_set_mode(struct histb_combphy_priv *priv)
+{
+ struct histb_combphy_mode *mode = &priv->mode;
+ struct regmap *syscon = priv->syscon;
+ u32 hw_sel;
+
+ if (is_mode_fixed(mode))
+ return 0;
+
+ switch (mode->select) {
+ case PHY_TYPE_SATA:
+ hw_sel = COMBPHY_MODE_SATA;
+ break;
+ case PHY_TYPE_PCIE:
+ hw_sel = COMBPHY_MODE_PCIE;
+ break;
+ case PHY_TYPE_USB3:
+ hw_sel = COMBPHY_MODE_USB3;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return regmap_update_bits(syscon, mode->reg, mode->mask,
+ hw_sel << mode->shift);
+}
+
+static int histb_combphy_init(struct phy *phy)
+{
+ struct histb_combphy_priv *priv = phy_get_drvdata(phy);
+ u32 val;
+ int ret;
+
+ ret = histb_combphy_set_mode(priv);
+ if (ret)
+ return ret;
+
+ /* Clear bypass bit to enable encoding/decoding */
+ val = readl(priv->mmio + COMBPHY_CFG_REG);
+ val &= ~COMBPHY_BYPASS_CODEC;
+ writel(val, priv->mmio + COMBPHY_CFG_REG);
+
+ ret = clk_prepare_enable(priv->ref_clk);
+ if (ret)
+ return ret;
+
+ reset_control_deassert(priv->por_rst);
+
+ /* Enable EP clock */
+ val = readl(priv->mmio + COMBPHY_CFG_REG);
+ val |= COMBPHY_CLKREF_OUT_OEN;
+ writel(val, priv->mmio + COMBPHY_CFG_REG);
+
+ /* Need to wait for EP clock stable */
+ mdelay(5);
+
+ /* Configure nano phy registers as suggested by vendor */
+ nano_register_write(priv, 0x1, 0x8);
+ nano_register_write(priv, 0xc, 0x9);
+ nano_register_write(priv, 0x1a, 0x4);
+
+ return 0;
+}
+
+static int histb_combphy_exit(struct phy *phy)
+{
+ struct histb_combphy_priv *priv = phy_get_drvdata(phy);
+ u32 val;
+
+ /* Disable EP clock */
+ val = readl(priv->mmio + COMBPHY_CFG_REG);
+ val &= ~COMBPHY_CLKREF_OUT_OEN;
+ writel(val, priv->mmio + COMBPHY_CFG_REG);
+
+ reset_control_assert(priv->por_rst);
+ clk_disable_unprepare(priv->ref_clk);
+
+ return 0;
+}
+
+static const struct phy_ops histb_combphy_ops = {
+ .init = histb_combphy_init,
+ .exit = histb_combphy_exit,
+ .owner = THIS_MODULE,
+};
+
+static struct phy *histb_combphy_xlate(struct device *dev,
+ struct of_phandle_args *args)
+{
+ struct histb_combphy_priv *priv = dev_get_drvdata(dev);
+ struct histb_combphy_mode *mode = &priv->mode;
+
+ if (args->args_count < 1) {
+ dev_err(dev, "invalid number of arguments\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ mode->select = args->args[0];
+
+ if (mode->select < PHY_TYPE_SATA || mode->select > PHY_TYPE_USB3) {
+ dev_err(dev, "invalid phy mode select argument\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ if (is_mode_fixed(mode) && mode->select != mode->fixed) {
+ dev_err(dev, "mode select %d mismatch fixed phy mode %d\n",
+ mode->select, mode->fixed);
+ return ERR_PTR(-EINVAL);
+ }
+
+ return priv->phy;
+}
+
+static int histb_combphy_probe(struct platform_device *pdev)
+{
+ struct phy_provider *phy_provider;
+ struct device *dev = &pdev->dev;
+ struct histb_combphy_priv *priv;
+ struct device_node *np = dev->of_node;
+ struct histb_combphy_mode *mode;
+ u32 vals[3];
+ int ret;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->mmio = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(priv->mmio)) {
+ ret = PTR_ERR(priv->mmio);
+ return ret;
+ }
+
+ priv->syscon = syscon_node_to_regmap(np->parent);
+ if (IS_ERR(priv->syscon)) {
+ dev_err(dev, "failed to find peri_ctrl syscon regmap\n");
+ return PTR_ERR(priv->syscon);
+ }
+
+ mode = &priv->mode;
+ mode->fixed = PHY_NONE;
+
+ ret = of_property_read_u32(np, "hisilicon,fixed-mode", &mode->fixed);
+ if (ret == 0)
+ dev_dbg(dev, "found fixed phy mode %d\n", mode->fixed);
+
+ ret = of_property_read_u32_array(np, "hisilicon,mode-select-bits",
+ vals, ARRAY_SIZE(vals));
+ if (ret == 0) {
+ if (is_mode_fixed(mode)) {
+ dev_err(dev, "found select bits for fixed mode phy\n");
+ return -EINVAL;
+ }
+
+ mode->reg = vals[0];
+ mode->shift = vals[1];
+ mode->mask = vals[2];
+ dev_dbg(dev, "found mode select bits\n");
+ } else {
+ if (!is_mode_fixed(mode)) {
+ dev_err(dev, "no valid select bits found for non-fixed phy\n");
+ return -ENODEV;
+ }
+ }
+
+ priv->ref_clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(priv->ref_clk)) {
+ dev_err(dev, "failed to find ref clock\n");
+ return PTR_ERR(priv->ref_clk);
+ }
+
+ priv->por_rst = devm_reset_control_get(dev, NULL);
+ if (IS_ERR(priv->por_rst)) {
+ dev_err(dev, "failed to get poweron reset\n");
+ return PTR_ERR(priv->por_rst);
+ }
+
+ priv->phy = devm_phy_create(dev, NULL, &histb_combphy_ops);
+ if (IS_ERR(priv->phy)) {
+ dev_err(dev, "failed to create combphy\n");
+ return PTR_ERR(priv->phy);
+ }
+
+ dev_set_drvdata(dev, priv);
+ phy_set_drvdata(priv->phy, priv);
+
+ phy_provider = devm_of_phy_provider_register(dev, histb_combphy_xlate);
+ return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id histb_combphy_of_match[] = {
+ { .compatible = "hisilicon,hi3798cv200-combphy" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, histb_combphy_of_match);
+
+static struct platform_driver histb_combphy_driver = {
+ .probe = histb_combphy_probe,
+ .driver = {
+ .name = "combphy",
+ .of_match_table = histb_combphy_of_match,
+ },
+};
+module_platform_driver(histb_combphy_driver);
+
+MODULE_DESCRIPTION("HiSilicon STB COMBPHY driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/hisilicon/phy-hix5hd2-sata.c b/drivers/phy/hisilicon/phy-hix5hd2-sata.c
new file mode 100644
index 0000000000..1b26ddb4c8
--- /dev/null
+++ b/drivers/phy/hisilicon/phy-hix5hd2-sata.c
@@ -0,0 +1,188 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2014 Linaro Ltd.
+ * Copyright (c) 2014 HiSilicon Limited.
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define SATA_PHY0_CTLL 0xa0
+#define MPLL_MULTIPLIER_SHIFT 1
+#define MPLL_MULTIPLIER_MASK 0xfe
+#define MPLL_MULTIPLIER_50M 0x3c
+#define MPLL_MULTIPLIER_100M 0x1e
+#define PHY_RESET BIT(0)
+#define REF_SSP_EN BIT(9)
+#define SSC_EN BIT(10)
+#define REF_USE_PAD BIT(23)
+
+#define SATA_PORT_PHYCTL 0x174
+#define SPEED_MODE_MASK 0x6f0000
+#define HALF_RATE_SHIFT 16
+#define PHY_CONFIG_SHIFT 18
+#define GEN2_EN_SHIFT 21
+#define SPEED_CTRL BIT(20)
+
+#define SATA_PORT_PHYCTL1 0x148
+#define AMPLITUDE_MASK 0x3ffffe
+#define AMPLITUDE_GEN3 0x68
+#define AMPLITUDE_GEN3_SHIFT 15
+#define AMPLITUDE_GEN2 0x56
+#define AMPLITUDE_GEN2_SHIFT 8
+#define AMPLITUDE_GEN1 0x56
+#define AMPLITUDE_GEN1_SHIFT 1
+
+#define SATA_PORT_PHYCTL2 0x14c
+#define PREEMPH_MASK 0x3ffff
+#define PREEMPH_GEN3 0x20
+#define PREEMPH_GEN3_SHIFT 12
+#define PREEMPH_GEN2 0x15
+#define PREEMPH_GEN2_SHIFT 6
+#define PREEMPH_GEN1 0x5
+#define PREEMPH_GEN1_SHIFT 0
+
+struct hix5hd2_priv {
+ void __iomem *base;
+ struct regmap *peri_ctrl;
+};
+
+enum phy_speed_mode {
+ SPEED_MODE_GEN1 = 0,
+ SPEED_MODE_GEN2 = 1,
+ SPEED_MODE_GEN3 = 2,
+};
+
+static int hix5hd2_sata_phy_init(struct phy *phy)
+{
+ struct hix5hd2_priv *priv = phy_get_drvdata(phy);
+ u32 val, data[2];
+ int ret;
+
+ if (priv->peri_ctrl) {
+ ret = of_property_read_u32_array(phy->dev.of_node,
+ "hisilicon,power-reg",
+ &data[0], 2);
+ if (ret) {
+ dev_err(&phy->dev, "Fail read hisilicon,power-reg\n");
+ return ret;
+ }
+
+ regmap_update_bits(priv->peri_ctrl, data[0],
+ BIT(data[1]), BIT(data[1]));
+ }
+
+ /* reset phy */
+ val = readl_relaxed(priv->base + SATA_PHY0_CTLL);
+ val &= ~(MPLL_MULTIPLIER_MASK | REF_USE_PAD);
+ val |= MPLL_MULTIPLIER_50M << MPLL_MULTIPLIER_SHIFT |
+ REF_SSP_EN | PHY_RESET;
+ writel_relaxed(val, priv->base + SATA_PHY0_CTLL);
+ msleep(20);
+ val &= ~PHY_RESET;
+ writel_relaxed(val, priv->base + SATA_PHY0_CTLL);
+
+ val = readl_relaxed(priv->base + SATA_PORT_PHYCTL1);
+ val &= ~AMPLITUDE_MASK;
+ val |= AMPLITUDE_GEN3 << AMPLITUDE_GEN3_SHIFT |
+ AMPLITUDE_GEN2 << AMPLITUDE_GEN2_SHIFT |
+ AMPLITUDE_GEN1 << AMPLITUDE_GEN1_SHIFT;
+ writel_relaxed(val, priv->base + SATA_PORT_PHYCTL1);
+
+ val = readl_relaxed(priv->base + SATA_PORT_PHYCTL2);
+ val &= ~PREEMPH_MASK;
+ val |= PREEMPH_GEN3 << PREEMPH_GEN3_SHIFT |
+ PREEMPH_GEN2 << PREEMPH_GEN2_SHIFT |
+ PREEMPH_GEN1 << PREEMPH_GEN1_SHIFT;
+ writel_relaxed(val, priv->base + SATA_PORT_PHYCTL2);
+
+ /* ensure PHYCTRL setting takes effect */
+ val = readl_relaxed(priv->base + SATA_PORT_PHYCTL);
+ val &= ~SPEED_MODE_MASK;
+ val |= SPEED_MODE_GEN1 << HALF_RATE_SHIFT |
+ SPEED_MODE_GEN1 << PHY_CONFIG_SHIFT |
+ SPEED_MODE_GEN1 << GEN2_EN_SHIFT | SPEED_CTRL;
+ writel_relaxed(val, priv->base + SATA_PORT_PHYCTL);
+
+ msleep(20);
+ val &= ~SPEED_MODE_MASK;
+ val |= SPEED_MODE_GEN3 << HALF_RATE_SHIFT |
+ SPEED_MODE_GEN3 << PHY_CONFIG_SHIFT |
+ SPEED_MODE_GEN3 << GEN2_EN_SHIFT | SPEED_CTRL;
+ writel_relaxed(val, priv->base + SATA_PORT_PHYCTL);
+
+ val &= ~(SPEED_MODE_MASK | SPEED_CTRL);
+ val |= SPEED_MODE_GEN2 << HALF_RATE_SHIFT |
+ SPEED_MODE_GEN2 << PHY_CONFIG_SHIFT |
+ SPEED_MODE_GEN2 << GEN2_EN_SHIFT;
+ writel_relaxed(val, priv->base + SATA_PORT_PHYCTL);
+
+ return 0;
+}
+
+static const struct phy_ops hix5hd2_sata_phy_ops = {
+ .init = hix5hd2_sata_phy_init,
+ .owner = THIS_MODULE,
+};
+
+static int hix5hd2_sata_phy_probe(struct platform_device *pdev)
+{
+ struct phy_provider *phy_provider;
+ struct device *dev = &pdev->dev;
+ struct resource *res;
+ struct phy *phy;
+ struct hix5hd2_priv *priv;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -EINVAL;
+
+ priv->base = devm_ioremap(dev, res->start, resource_size(res));
+ if (!priv->base)
+ return -ENOMEM;
+
+ priv->peri_ctrl = syscon_regmap_lookup_by_phandle(dev->of_node,
+ "hisilicon,peripheral-syscon");
+ if (IS_ERR(priv->peri_ctrl))
+ priv->peri_ctrl = NULL;
+
+ phy = devm_phy_create(dev, NULL, &hix5hd2_sata_phy_ops);
+ if (IS_ERR(phy)) {
+ dev_err(dev, "failed to create PHY\n");
+ return PTR_ERR(phy);
+ }
+
+ phy_set_drvdata(phy, priv);
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+ return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id hix5hd2_sata_phy_of_match[] = {
+ {.compatible = "hisilicon,hix5hd2-sata-phy",},
+ { },
+};
+MODULE_DEVICE_TABLE(of, hix5hd2_sata_phy_of_match);
+
+static struct platform_driver hix5hd2_sata_phy_driver = {
+ .probe = hix5hd2_sata_phy_probe,
+ .driver = {
+ .name = "hix5hd2-sata-phy",
+ .of_match_table = hix5hd2_sata_phy_of_match,
+ }
+};
+module_platform_driver(hix5hd2_sata_phy_driver);
+
+MODULE_AUTHOR("Jiancheng Xue <xuejiancheng@huawei.com>");
+MODULE_DESCRIPTION("HISILICON HIX5HD2 SATA PHY driver");
+MODULE_ALIAS("platform:hix5hd2-sata-phy");
+MODULE_LICENSE("GPL v2");
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-15 12:20:10 +0000