summaryrefslogtreecommitdiffstats
path: root/drivers/phy/marvell/phy-mvebu-cp110-utmi.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/phy/marvell/phy-mvebu-cp110-utmi.c')
-rw-r--r--drivers/phy/marvell/phy-mvebu-cp110-utmi.c384
1 files changed, 384 insertions, 0 deletions
diff --git a/drivers/phy/marvell/phy-mvebu-cp110-utmi.c b/drivers/phy/marvell/phy-mvebu-cp110-utmi.c
new file mode 100644
index 0000000000..4922a5f332
--- /dev/null
+++ b/drivers/phy/marvell/phy-mvebu-cp110-utmi.c
@@ -0,0 +1,384 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021 Marvell
+ *
+ * Authors:
+ * Konstantin Porotchkin <kostap@marvell.com>
+ *
+ * Marvell CP110 UTMI PHY driver
+ */
+
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/usb/of.h>
+#include <linux/usb/otg.h>
+
+#define UTMI_PHY_PORTS 2
+
+/* CP110 UTMI register macro definetions */
+#define SYSCON_USB_CFG_REG 0x420
+#define USB_CFG_DEVICE_EN_MASK BIT(0)
+#define USB_CFG_DEVICE_MUX_OFFSET 1
+#define USB_CFG_DEVICE_MUX_MASK BIT(1)
+#define USB_CFG_PLL_MASK BIT(25)
+
+#define SYSCON_UTMI_CFG_REG(id) (0x440 + (id) * 4)
+#define UTMI_PHY_CFG_PU_MASK BIT(5)
+
+#define UTMI_PLL_CTRL_REG 0x0
+#define PLL_REFDIV_OFFSET 0
+#define PLL_REFDIV_MASK GENMASK(6, 0)
+#define PLL_REFDIV_VAL 0x5
+#define PLL_FBDIV_OFFSET 16
+#define PLL_FBDIV_MASK GENMASK(24, 16)
+#define PLL_FBDIV_VAL 0x60
+#define PLL_SEL_LPFR_MASK GENMASK(29, 28)
+#define PLL_RDY BIT(31)
+#define UTMI_CAL_CTRL_REG 0x8
+#define IMPCAL_VTH_OFFSET 8
+#define IMPCAL_VTH_MASK GENMASK(10, 8)
+#define IMPCAL_VTH_VAL 0x7
+#define IMPCAL_DONE BIT(23)
+#define PLLCAL_DONE BIT(31)
+#define UTMI_TX_CH_CTRL_REG 0xC
+#define DRV_EN_LS_OFFSET 12
+#define DRV_EN_LS_MASK GENMASK(15, 12)
+#define IMP_SEL_LS_OFFSET 16
+#define IMP_SEL_LS_MASK GENMASK(19, 16)
+#define TX_AMP_OFFSET 20
+#define TX_AMP_MASK GENMASK(22, 20)
+#define TX_AMP_VAL 0x4
+#define UTMI_RX_CH_CTRL0_REG 0x14
+#define SQ_DET_EN BIT(15)
+#define SQ_ANA_DTC_SEL BIT(28)
+#define UTMI_RX_CH_CTRL1_REG 0x18
+#define SQ_AMP_CAL_OFFSET 0
+#define SQ_AMP_CAL_MASK GENMASK(2, 0)
+#define SQ_AMP_CAL_VAL 1
+#define SQ_AMP_CAL_EN BIT(3)
+#define UTMI_CTRL_STATUS0_REG 0x24
+#define SUSPENDM BIT(22)
+#define TEST_SEL BIT(25)
+#define UTMI_CHGDTC_CTRL_REG 0x38
+#define VDAT_OFFSET 8
+#define VDAT_MASK GENMASK(9, 8)
+#define VDAT_VAL 1
+#define VSRC_OFFSET 10
+#define VSRC_MASK GENMASK(11, 10)
+#define VSRC_VAL 1
+
+#define PLL_LOCK_DELAY_US 10000
+#define PLL_LOCK_TIMEOUT_US 1000000
+
+#define PORT_REGS(p) ((p)->priv->regs + (p)->id * 0x1000)
+
+/**
+ * struct mvebu_cp110_utmi - PHY driver data
+ *
+ * @regs: PHY registers
+ * @syscon: Regmap with system controller registers
+ * @dev: device driver handle
+ * @ops: phy ops
+ */
+struct mvebu_cp110_utmi {
+ void __iomem *regs;
+ struct regmap *syscon;
+ struct device *dev;
+ const struct phy_ops *ops;
+};
+
+/**
+ * struct mvebu_cp110_utmi_port - PHY port data
+ *
+ * @priv: PHY driver data
+ * @id: PHY port ID
+ * @dr_mode: PHY connection: USB_DR_MODE_HOST or USB_DR_MODE_PERIPHERAL
+ */
+struct mvebu_cp110_utmi_port {
+ struct mvebu_cp110_utmi *priv;
+ u32 id;
+ enum usb_dr_mode dr_mode;
+};
+
+static void mvebu_cp110_utmi_port_setup(struct mvebu_cp110_utmi_port *port)
+{
+ u32 reg;
+
+ /*
+ * Setup PLL.
+ * The reference clock is the frequency of quartz resonator
+ * connected to pins REFCLK_XIN and REFCLK_XOUT of the SoC.
+ * Register init values are matching the 40MHz default clock.
+ * The crystal used for all platform boards is now 25MHz.
+ * See the functional specification for details.
+ */
+ reg = readl(PORT_REGS(port) + UTMI_PLL_CTRL_REG);
+ reg &= ~(PLL_REFDIV_MASK | PLL_FBDIV_MASK | PLL_SEL_LPFR_MASK);
+ reg |= (PLL_REFDIV_VAL << PLL_REFDIV_OFFSET) |
+ (PLL_FBDIV_VAL << PLL_FBDIV_OFFSET);
+ writel(reg, PORT_REGS(port) + UTMI_PLL_CTRL_REG);
+
+ /* Impedance Calibration Threshold Setting */
+ reg = readl(PORT_REGS(port) + UTMI_CAL_CTRL_REG);
+ reg &= ~IMPCAL_VTH_MASK;
+ reg |= IMPCAL_VTH_VAL << IMPCAL_VTH_OFFSET;
+ writel(reg, PORT_REGS(port) + UTMI_CAL_CTRL_REG);
+
+ /* Set LS TX driver strength coarse control */
+ reg = readl(PORT_REGS(port) + UTMI_TX_CH_CTRL_REG);
+ reg &= ~TX_AMP_MASK;
+ reg |= TX_AMP_VAL << TX_AMP_OFFSET;
+ writel(reg, PORT_REGS(port) + UTMI_TX_CH_CTRL_REG);
+
+ /* Disable SQ and enable analog squelch detect */
+ reg = readl(PORT_REGS(port) + UTMI_RX_CH_CTRL0_REG);
+ reg &= ~SQ_DET_EN;
+ reg |= SQ_ANA_DTC_SEL;
+ writel(reg, PORT_REGS(port) + UTMI_RX_CH_CTRL0_REG);
+
+ /*
+ * Set External squelch calibration number and
+ * enable the External squelch calibration
+ */
+ reg = readl(PORT_REGS(port) + UTMI_RX_CH_CTRL1_REG);
+ reg &= ~SQ_AMP_CAL_MASK;
+ reg |= (SQ_AMP_CAL_VAL << SQ_AMP_CAL_OFFSET) | SQ_AMP_CAL_EN;
+ writel(reg, PORT_REGS(port) + UTMI_RX_CH_CTRL1_REG);
+
+ /*
+ * Set Control VDAT Reference Voltage - 0.325V and
+ * Control VSRC Reference Voltage - 0.6V
+ */
+ reg = readl(PORT_REGS(port) + UTMI_CHGDTC_CTRL_REG);
+ reg &= ~(VDAT_MASK | VSRC_MASK);
+ reg |= (VDAT_VAL << VDAT_OFFSET) | (VSRC_VAL << VSRC_OFFSET);
+ writel(reg, PORT_REGS(port) + UTMI_CHGDTC_CTRL_REG);
+}
+
+static int mvebu_cp110_utmi_phy_power_off(struct phy *phy)
+{
+ struct mvebu_cp110_utmi_port *port = phy_get_drvdata(phy);
+ struct mvebu_cp110_utmi *utmi = port->priv;
+ int i;
+
+ /* Power down UTMI PHY port */
+ regmap_clear_bits(utmi->syscon, SYSCON_UTMI_CFG_REG(port->id),
+ UTMI_PHY_CFG_PU_MASK);
+
+ for (i = 0; i < UTMI_PHY_PORTS; i++) {
+ int test = regmap_test_bits(utmi->syscon,
+ SYSCON_UTMI_CFG_REG(i),
+ UTMI_PHY_CFG_PU_MASK);
+ /* skip PLL shutdown if there are active UTMI PHY ports */
+ if (test != 0)
+ return 0;
+ }
+
+ /* PLL Power down if all UTMI PHYs are down */
+ regmap_clear_bits(utmi->syscon, SYSCON_USB_CFG_REG, USB_CFG_PLL_MASK);
+
+ return 0;
+}
+
+static int mvebu_cp110_utmi_phy_power_on(struct phy *phy)
+{
+ struct mvebu_cp110_utmi_port *port = phy_get_drvdata(phy);
+ struct mvebu_cp110_utmi *utmi = port->priv;
+ struct device *dev = &phy->dev;
+ int ret;
+ u32 reg;
+
+ /* It is necessary to power off UTMI before configuration */
+ ret = mvebu_cp110_utmi_phy_power_off(phy);
+ if (ret) {
+ dev_err(dev, "UTMI power OFF before power ON failed\n");
+ return ret;
+ }
+
+ /*
+ * If UTMI port is connected to USB Device controller,
+ * configure the USB MUX prior to UTMI PHY initialization.
+ * The single USB device controller can be connected
+ * to UTMI0 or to UTMI1 PHY port, but not to both.
+ */
+ if (port->dr_mode == USB_DR_MODE_PERIPHERAL) {
+ regmap_update_bits(utmi->syscon, SYSCON_USB_CFG_REG,
+ USB_CFG_DEVICE_EN_MASK | USB_CFG_DEVICE_MUX_MASK,
+ USB_CFG_DEVICE_EN_MASK |
+ (port->id << USB_CFG_DEVICE_MUX_OFFSET));
+ }
+
+ /* Set Test suspendm mode and enable Test UTMI select */
+ reg = readl(PORT_REGS(port) + UTMI_CTRL_STATUS0_REG);
+ reg |= SUSPENDM | TEST_SEL;
+ writel(reg, PORT_REGS(port) + UTMI_CTRL_STATUS0_REG);
+
+ /* Wait for UTMI power down */
+ mdelay(1);
+
+ /* PHY port setup first */
+ mvebu_cp110_utmi_port_setup(port);
+
+ /* Power UP UTMI PHY */
+ regmap_set_bits(utmi->syscon, SYSCON_UTMI_CFG_REG(port->id),
+ UTMI_PHY_CFG_PU_MASK);
+
+ /* Disable Test UTMI select */
+ reg = readl(PORT_REGS(port) + UTMI_CTRL_STATUS0_REG);
+ reg &= ~TEST_SEL;
+ writel(reg, PORT_REGS(port) + UTMI_CTRL_STATUS0_REG);
+
+ /* Wait for impedance calibration */
+ ret = readl_poll_timeout(PORT_REGS(port) + UTMI_CAL_CTRL_REG, reg,
+ reg & IMPCAL_DONE,
+ PLL_LOCK_DELAY_US, PLL_LOCK_TIMEOUT_US);
+ if (ret) {
+ dev_err(dev, "Failed to end UTMI impedance calibration\n");
+ return ret;
+ }
+
+ /* Wait for PLL calibration */
+ ret = readl_poll_timeout(PORT_REGS(port) + UTMI_CAL_CTRL_REG, reg,
+ reg & PLLCAL_DONE,
+ PLL_LOCK_DELAY_US, PLL_LOCK_TIMEOUT_US);
+ if (ret) {
+ dev_err(dev, "Failed to end UTMI PLL calibration\n");
+ return ret;
+ }
+
+ /* Wait for PLL ready */
+ ret = readl_poll_timeout(PORT_REGS(port) + UTMI_PLL_CTRL_REG, reg,
+ reg & PLL_RDY,
+ PLL_LOCK_DELAY_US, PLL_LOCK_TIMEOUT_US);
+ if (ret) {
+ dev_err(dev, "PLL is not ready\n");
+ return ret;
+ }
+
+ /* PLL Power up */
+ regmap_set_bits(utmi->syscon, SYSCON_USB_CFG_REG, USB_CFG_PLL_MASK);
+
+ return 0;
+}
+
+static const struct phy_ops mvebu_cp110_utmi_phy_ops = {
+ .power_on = mvebu_cp110_utmi_phy_power_on,
+ .power_off = mvebu_cp110_utmi_phy_power_off,
+ .owner = THIS_MODULE,
+};
+
+static const struct of_device_id mvebu_cp110_utmi_of_match[] = {
+ { .compatible = "marvell,cp110-utmi-phy" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, mvebu_cp110_utmi_of_match);
+
+static int mvebu_cp110_utmi_phy_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct mvebu_cp110_utmi *utmi;
+ struct phy_provider *provider;
+ struct device_node *child;
+ u32 usb_devices = 0;
+
+ utmi = devm_kzalloc(dev, sizeof(*utmi), GFP_KERNEL);
+ if (!utmi)
+ return -ENOMEM;
+
+ utmi->dev = dev;
+
+ /* Get system controller region */
+ utmi->syscon = syscon_regmap_lookup_by_phandle(dev->of_node,
+ "marvell,system-controller");
+ if (IS_ERR(utmi->syscon)) {
+ dev_err(dev, "Missing UTMI system controller\n");
+ return PTR_ERR(utmi->syscon);
+ }
+
+ /* Get UTMI memory region */
+ utmi->regs = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(utmi->regs))
+ return PTR_ERR(utmi->regs);
+
+ for_each_available_child_of_node(dev->of_node, child) {
+ struct mvebu_cp110_utmi_port *port;
+ struct phy *phy;
+ int ret;
+ u32 port_id;
+
+ ret = of_property_read_u32(child, "reg", &port_id);
+ if ((ret < 0) || (port_id >= UTMI_PHY_PORTS)) {
+ dev_err(dev,
+ "invalid 'reg' property on child %pOF\n",
+ child);
+ continue;
+ }
+
+ port = devm_kzalloc(dev, sizeof(*port), GFP_KERNEL);
+ if (!port) {
+ of_node_put(child);
+ return -ENOMEM;
+ }
+
+ port->dr_mode = of_usb_get_dr_mode_by_phy(child, -1);
+ if ((port->dr_mode != USB_DR_MODE_HOST) &&
+ (port->dr_mode != USB_DR_MODE_PERIPHERAL)) {
+ dev_err(&pdev->dev,
+ "Missing dual role setting of the port%d, will use HOST mode\n",
+ port_id);
+ port->dr_mode = USB_DR_MODE_HOST;
+ }
+
+ if (port->dr_mode == USB_DR_MODE_PERIPHERAL) {
+ usb_devices++;
+ if (usb_devices > 1) {
+ dev_err(dev,
+ "Single USB device allowed! Port%d will use HOST mode\n",
+ port_id);
+ port->dr_mode = USB_DR_MODE_HOST;
+ }
+ }
+
+ /* Retrieve PHY capabilities */
+ utmi->ops = &mvebu_cp110_utmi_phy_ops;
+
+ /* Instantiate the PHY */
+ phy = devm_phy_create(dev, child, utmi->ops);
+ if (IS_ERR(phy)) {
+ dev_err(dev, "Failed to create the UTMI PHY\n");
+ of_node_put(child);
+ return PTR_ERR(phy);
+ }
+
+ port->priv = utmi;
+ port->id = port_id;
+ phy_set_drvdata(phy, port);
+
+ /* Ensure the PHY is powered off */
+ mvebu_cp110_utmi_phy_power_off(phy);
+ }
+
+ dev_set_drvdata(dev, utmi);
+ provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+ return PTR_ERR_OR_ZERO(provider);
+}
+
+static struct platform_driver mvebu_cp110_utmi_driver = {
+ .probe = mvebu_cp110_utmi_phy_probe,
+ .driver = {
+ .name = "mvebu-cp110-utmi-phy",
+ .of_match_table = mvebu_cp110_utmi_of_match,
+ },
+};
+module_platform_driver(mvebu_cp110_utmi_driver);
+
+MODULE_AUTHOR("Konstatin Porotchkin <kostap@marvell.com>");
+MODULE_DESCRIPTION("Marvell Armada CP110 UTMI PHY driver");
+MODULE_LICENSE("GPL v2");