diff options
Diffstat (limited to 'drivers/phy/mediatek/phy-mtk-tphy.c')
| -rw-r--r-- | drivers/phy/mediatek/phy-mtk-tphy.c | 1673 |
1 files changed, 1673 insertions, 0 deletions
diff --git a/drivers/phy/mediatek/phy-mtk-tphy.c b/drivers/phy/mediatek/phy-mtk-tphy.c new file mode 100644 index 0000000000..05eab90141 --- /dev/null +++ b/drivers/phy/mediatek/phy-mtk-tphy.c @@ -0,0 +1,1673 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2015 MediaTek Inc. + * Author: Chunfeng Yun <chunfeng.yun@mediatek.com> + * + */ + +#include <dt-bindings/phy/phy.h> +#include <linux/clk.h> +#include <linux/debugfs.h> +#include <linux/delay.h> +#include <linux/iopoll.h> +#include <linux/mfd/syscon.h> +#include <linux/module.h> +#include <linux/nvmem-consumer.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> + +#include "phy-mtk-io.h" + +/* version V1 sub-banks offset base address */ +/* banks shared by multiple phys */ +#define SSUSB_SIFSLV_V1_SPLLC 0x000 /* shared by u3 phys */ +#define SSUSB_SIFSLV_V1_U2FREQ 0x100 /* shared by u2 phys */ +#define SSUSB_SIFSLV_V1_CHIP 0x300 /* shared by u3 phys */ +/* u2 phy bank */ +#define SSUSB_SIFSLV_V1_U2PHY_COM 0x000 +/* u3/pcie/sata phy banks */ +#define SSUSB_SIFSLV_V1_U3PHYD 0x000 +#define SSUSB_SIFSLV_V1_U3PHYA 0x200 + +/* version V2/V3 sub-banks offset base address */ +/* V3: U2FREQ is not used anymore, but reserved */ +/* u2 phy banks */ +#define SSUSB_SIFSLV_V2_MISC 0x000 +#define SSUSB_SIFSLV_V2_U2FREQ 0x100 +#define SSUSB_SIFSLV_V2_U2PHY_COM 0x300 +/* u3/pcie/sata phy banks */ +#define SSUSB_SIFSLV_V2_SPLLC 0x000 +#define SSUSB_SIFSLV_V2_CHIP 0x100 +#define SSUSB_SIFSLV_V2_U3PHYD 0x200 +#define SSUSB_SIFSLV_V2_U3PHYA 0x400 + +#define U3P_MISC_REG1 0x04 +#define MR1_EFUSE_AUTO_LOAD_DIS BIT(6) + +#define U3P_USBPHYACR0 0x000 +#define PA0_RG_U2PLL_FORCE_ON BIT(15) +#define PA0_USB20_PLL_PREDIV GENMASK(7, 6) +#define PA0_RG_USB20_INTR_EN BIT(5) + +#define U3P_USBPHYACR1 0x004 +#define PA1_RG_INTR_CAL GENMASK(23, 19) +#define PA1_RG_VRT_SEL GENMASK(14, 12) +#define PA1_RG_TERM_SEL GENMASK(10, 8) + +#define U3P_USBPHYACR2 0x008 +#define PA2_RG_U2PLL_BW GENMASK(21, 19) +#define PA2_RG_SIF_U2PLL_FORCE_EN BIT(18) + +#define U3P_USBPHYACR5 0x014 +#define PA5_RG_U2_HSTX_SRCAL_EN BIT(15) +#define PA5_RG_U2_HSTX_SRCTRL GENMASK(14, 12) +#define PA5_RG_U2_HS_100U_U3_EN BIT(11) + +#define U3P_USBPHYACR6 0x018 +#define PA6_RG_U2_PRE_EMP GENMASK(31, 30) +#define PA6_RG_U2_BC11_SW_EN BIT(23) +#define PA6_RG_U2_OTG_VBUSCMP_EN BIT(20) +#define PA6_RG_U2_DISCTH GENMASK(7, 4) +#define PA6_RG_U2_SQTH GENMASK(3, 0) + +#define U3P_U2PHYACR4 0x020 +#define P2C_RG_USB20_GPIO_CTL BIT(9) +#define P2C_USB20_GPIO_MODE BIT(8) +#define P2C_U2_GPIO_CTR_MSK (P2C_RG_USB20_GPIO_CTL | P2C_USB20_GPIO_MODE) + +#define U3P_U2PHYA_RESV 0x030 +#define P2R_RG_U2PLL_FBDIV_26M 0x1bb13b +#define P2R_RG_U2PLL_FBDIV_48M 0x3c0000 + +#define U3P_U2PHYA_RESV1 0x044 +#define P2R_RG_U2PLL_REFCLK_SEL BIT(5) +#define P2R_RG_U2PLL_FRA_EN BIT(3) + +#define U3D_U2PHYDCR0 0x060 +#define P2C_RG_SIF_U2PLL_FORCE_ON BIT(24) + +#define U3P_U2PHYDTM0 0x068 +#define P2C_FORCE_UART_EN BIT(26) +#define P2C_FORCE_DATAIN BIT(23) +#define P2C_FORCE_DM_PULLDOWN BIT(21) +#define P2C_FORCE_DP_PULLDOWN BIT(20) +#define P2C_FORCE_XCVRSEL BIT(19) +#define P2C_FORCE_SUSPENDM BIT(18) +#define P2C_FORCE_TERMSEL BIT(17) +#define P2C_RG_DATAIN GENMASK(13, 10) +#define P2C_RG_DMPULLDOWN BIT(7) +#define P2C_RG_DPPULLDOWN BIT(6) +#define P2C_RG_XCVRSEL GENMASK(5, 4) +#define P2C_RG_SUSPENDM BIT(3) +#define P2C_RG_TERMSEL BIT(2) +#define P2C_DTM0_PART_MASK \ + (P2C_FORCE_DATAIN | P2C_FORCE_DM_PULLDOWN | \ + P2C_FORCE_DP_PULLDOWN | P2C_FORCE_XCVRSEL | \ + P2C_FORCE_TERMSEL | P2C_RG_DMPULLDOWN | \ + P2C_RG_DPPULLDOWN | P2C_RG_TERMSEL) + +#define U3P_U2PHYDTM1 0x06C +#define P2C_RG_UART_EN BIT(16) +#define P2C_FORCE_IDDIG BIT(9) +#define P2C_RG_VBUSVALID BIT(5) +#define P2C_RG_SESSEND BIT(4) +#define P2C_RG_AVALID BIT(2) +#define P2C_RG_IDDIG BIT(1) + +#define U3P_U2PHYBC12C 0x080 +#define P2C_RG_CHGDT_EN BIT(0) + +#define U3P_U3_CHIP_GPIO_CTLD 0x0c +#define P3C_REG_IP_SW_RST BIT(31) +#define P3C_MCU_BUS_CK_GATE_EN BIT(30) +#define P3C_FORCE_IP_SW_RST BIT(29) + +#define U3P_U3_CHIP_GPIO_CTLE 0x10 +#define P3C_RG_SWRST_U3_PHYD BIT(25) +#define P3C_RG_SWRST_U3_PHYD_FORCE_EN BIT(24) + +#define U3P_U3_PHYA_REG0 0x000 +#define P3A_RG_IEXT_INTR GENMASK(15, 10) +#define P3A_RG_CLKDRV_OFF GENMASK(3, 2) + +#define U3P_U3_PHYA_REG1 0x004 +#define P3A_RG_CLKDRV_AMP GENMASK(31, 29) + +#define U3P_U3_PHYA_REG6 0x018 +#define P3A_RG_TX_EIDLE_CM GENMASK(31, 28) + +#define U3P_U3_PHYA_REG9 0x024 +#define P3A_RG_RX_DAC_MUX GENMASK(5, 1) + +#define U3P_U3_PHYA_DA_REG0 0x100 +#define P3A_RG_XTAL_EXT_PE2H GENMASK(17, 16) +#define P3A_RG_XTAL_EXT_PE1H GENMASK(13, 12) +#define P3A_RG_XTAL_EXT_EN_U3 GENMASK(11, 10) + +#define U3P_U3_PHYA_DA_REG4 0x108 +#define P3A_RG_PLL_DIVEN_PE2H GENMASK(21, 19) +#define P3A_RG_PLL_BC_PE2H GENMASK(7, 6) + +#define U3P_U3_PHYA_DA_REG5 0x10c +#define P3A_RG_PLL_BR_PE2H GENMASK(29, 28) +#define P3A_RG_PLL_IC_PE2H GENMASK(15, 12) + +#define U3P_U3_PHYA_DA_REG6 0x110 +#define P3A_RG_PLL_IR_PE2H GENMASK(19, 16) + +#define U3P_U3_PHYA_DA_REG7 0x114 +#define P3A_RG_PLL_BP_PE2H GENMASK(19, 16) + +#define U3P_U3_PHYA_DA_REG20 0x13c +#define P3A_RG_PLL_DELTA1_PE2H GENMASK(31, 16) + +#define U3P_U3_PHYA_DA_REG25 0x148 +#define P3A_RG_PLL_DELTA_PE2H GENMASK(15, 0) + +#define U3P_U3_PHYD_LFPS1 0x00c +#define P3D_RG_FWAKE_TH GENMASK(21, 16) + +#define U3P_U3_PHYD_IMPCAL0 0x010 +#define P3D_RG_FORCE_TX_IMPEL BIT(31) +#define P3D_RG_TX_IMPEL GENMASK(28, 24) + +#define U3P_U3_PHYD_IMPCAL1 0x014 +#define P3D_RG_FORCE_RX_IMPEL BIT(31) +#define P3D_RG_RX_IMPEL GENMASK(28, 24) + +#define U3P_U3_PHYD_RSV 0x054 +#define P3D_RG_EFUSE_AUTO_LOAD_DIS BIT(12) + +#define U3P_U3_PHYD_CDR1 0x05c +#define P3D_RG_CDR_BIR_LTD1 GENMASK(28, 24) +#define P3D_RG_CDR_BIR_LTD0 GENMASK(12, 8) + +#define U3P_U3_PHYD_RXDET1 0x128 +#define P3D_RG_RXDET_STB2_SET GENMASK(17, 9) + +#define U3P_U3_PHYD_RXDET2 0x12c +#define P3D_RG_RXDET_STB2_SET_P3 GENMASK(8, 0) + +#define U3P_SPLLC_XTALCTL3 0x018 +#define XC3_RG_U3_XTAL_RX_PWD BIT(9) +#define XC3_RG_U3_FRC_XTAL_RX_PWD BIT(8) + +#define U3P_U2FREQ_FMCR0 0x00 +#define P2F_RG_MONCLK_SEL GENMASK(27, 26) +#define P2F_RG_FREQDET_EN BIT(24) +#define P2F_RG_CYCLECNT GENMASK(23, 0) + +#define U3P_U2FREQ_VALUE 0x0c + +#define U3P_U2FREQ_FMMONR1 0x10 +#define P2F_USB_FM_VALID BIT(0) +#define P2F_RG_FRCK_EN BIT(8) + +#define U3P_REF_CLK 26 /* MHZ */ +#define U3P_SLEW_RATE_COEF 28 +#define U3P_SR_COEF_DIVISOR 1000 +#define U3P_FM_DET_CYCLE_CNT 1024 + +/* SATA register setting */ +#define PHYD_CTRL_SIGNAL_MODE4 0x1c +/* CDR Charge Pump P-path current adjustment */ +#define RG_CDR_BICLTD1_GEN1_MSK GENMASK(23, 20) +#define RG_CDR_BICLTD0_GEN1_MSK GENMASK(11, 8) + +#define PHYD_DESIGN_OPTION2 0x24 +/* Symbol lock count selection */ +#define RG_LOCK_CNT_SEL_MSK GENMASK(5, 4) + +#define PHYD_DESIGN_OPTION9 0x40 +/* COMWAK GAP width window */ +#define RG_TG_MAX_MSK GENMASK(20, 16) +/* COMINIT GAP width window */ +#define RG_T2_MAX_MSK GENMASK(13, 8) +/* COMWAK GAP width window */ +#define RG_TG_MIN_MSK GENMASK(7, 5) +/* COMINIT GAP width window */ +#define RG_T2_MIN_MSK GENMASK(4, 0) + +#define ANA_RG_CTRL_SIGNAL1 0x4c +/* TX driver tail current control for 0dB de-empahsis mdoe for Gen1 speed */ +#define RG_IDRV_0DB_GEN1_MSK GENMASK(13, 8) + +#define ANA_RG_CTRL_SIGNAL4 0x58 +#define RG_CDR_BICLTR_GEN1_MSK GENMASK(23, 20) +/* Loop filter R1 resistance adjustment for Gen1 speed */ +#define RG_CDR_BR_GEN2_MSK GENMASK(10, 8) + +#define ANA_RG_CTRL_SIGNAL6 0x60 +/* I-path capacitance adjustment for Gen1 */ +#define RG_CDR_BC_GEN1_MSK GENMASK(28, 24) +#define RG_CDR_BIRLTR_GEN1_MSK GENMASK(4, 0) + +#define ANA_EQ_EYE_CTRL_SIGNAL1 0x6c +/* RX Gen1 LEQ tuning step */ +#define RG_EQ_DLEQ_LFI_GEN1_MSK GENMASK(11, 8) + +#define ANA_EQ_EYE_CTRL_SIGNAL4 0xd8 +#define RG_CDR_BIRLTD0_GEN1_MSK GENMASK(20, 16) + +#define ANA_EQ_EYE_CTRL_SIGNAL5 0xdc +#define RG_CDR_BIRLTD0_GEN3_MSK GENMASK(4, 0) + +/* PHY switch between pcie/usb3/sgmii/sata */ +#define USB_PHY_SWITCH_CTRL 0x0 +#define RG_PHY_SW_TYPE GENMASK(3, 0) +#define RG_PHY_SW_PCIE 0x0 +#define RG_PHY_SW_USB3 0x1 +#define RG_PHY_SW_SGMII 0x2 +#define RG_PHY_SW_SATA 0x3 + +#define TPHY_CLKS_CNT 2 + +#define USER_BUF_LEN(count) min_t(size_t, 8, (count)) + +enum mtk_phy_version { + MTK_PHY_V1 = 1, + MTK_PHY_V2, + MTK_PHY_V3, +}; + +struct mtk_phy_pdata { + /* avoid RX sensitivity level degradation only for mt8173 */ + bool avoid_rx_sen_degradation; + /* + * workaround only for mt8195, HW fix it for others of V3, + * u2phy should use integer mode instead of fractional mode of + * 48M PLL, fix it by switching PLL to 26M from default 48M + */ + bool sw_pll_48m_to_26m; + /* + * Some SoCs (e.g. mt8195) drop a bit when use auto load efuse, + * support sw way, also support it for v2/v3 optionally. + */ + bool sw_efuse_supported; + enum mtk_phy_version version; +}; + +struct u2phy_banks { + void __iomem *misc; + void __iomem *fmreg; + void __iomem *com; +}; + +struct u3phy_banks { + void __iomem *spllc; + void __iomem *chip; + void __iomem *phyd; /* include u3phyd_bank2 */ + void __iomem *phya; /* include u3phya_da */ +}; + +struct mtk_phy_instance { + struct phy *phy; + void __iomem *port_base; + union { + struct u2phy_banks u2_banks; + struct u3phy_banks u3_banks; + }; + struct clk_bulk_data clks[TPHY_CLKS_CNT]; + u32 index; + u32 type; + struct regmap *type_sw; + u32 type_sw_reg; + u32 type_sw_index; + u32 efuse_sw_en; + u32 efuse_intr; + u32 efuse_tx_imp; + u32 efuse_rx_imp; + int eye_src; + int eye_vrt; + int eye_term; + int intr; + int discth; + int pre_emphasis; + bool bc12_en; +}; + +struct mtk_tphy { + struct device *dev; + void __iomem *sif_base; /* only shared sif */ + const struct mtk_phy_pdata *pdata; + struct mtk_phy_instance **phys; + int nphys; + int src_ref_clk; /* MHZ, reference clock for slew rate calibrate */ + int src_coef; /* coefficient for slew rate calibrate */ +}; + +#if IS_ENABLED(CONFIG_DEBUG_FS) + +enum u2_phy_params { + U2P_EYE_VRT = 0, + U2P_EYE_TERM, + U2P_EFUSE_EN, + U2P_EFUSE_INTR, + U2P_DISCTH, + U2P_PRE_EMPHASIS, +}; + +enum u3_phy_params { + U3P_EFUSE_EN = 0, + U3P_EFUSE_INTR, + U3P_EFUSE_TX_IMP, + U3P_EFUSE_RX_IMP, +}; + +static const char *const u2_phy_files[] = { + [U2P_EYE_VRT] = "vrt", + [U2P_EYE_TERM] = "term", + [U2P_EFUSE_EN] = "efuse", + [U2P_EFUSE_INTR] = "intr", + [U2P_DISCTH] = "discth", + [U2P_PRE_EMPHASIS] = "preemph", +}; + +static const char *const u3_phy_files[] = { + [U3P_EFUSE_EN] = "efuse", + [U3P_EFUSE_INTR] = "intr", + [U3P_EFUSE_TX_IMP] = "tx-imp", + [U3P_EFUSE_RX_IMP] = "rx-imp", +}; + +static int u2_phy_params_show(struct seq_file *sf, void *unused) +{ + struct mtk_phy_instance *inst = sf->private; + const char *fname = file_dentry(sf->file)->d_iname; + struct u2phy_banks *u2_banks = &inst->u2_banks; + void __iomem *com = u2_banks->com; + u32 max = 0; + u32 tmp = 0; + u32 val = 0; + int ret; + + ret = match_string(u2_phy_files, ARRAY_SIZE(u2_phy_files), fname); + if (ret < 0) + return ret; + + switch (ret) { + case U2P_EYE_VRT: + tmp = readl(com + U3P_USBPHYACR1); + val = FIELD_GET(PA1_RG_VRT_SEL, tmp); + max = FIELD_MAX(PA1_RG_VRT_SEL); + break; + + case U2P_EYE_TERM: + tmp = readl(com + U3P_USBPHYACR1); + val = FIELD_GET(PA1_RG_TERM_SEL, tmp); + max = FIELD_MAX(PA1_RG_TERM_SEL); + break; + + case U2P_EFUSE_EN: + if (u2_banks->misc) { + tmp = readl(u2_banks->misc + U3P_MISC_REG1); + max = 1; + } + + val = !!(tmp & MR1_EFUSE_AUTO_LOAD_DIS); + break; + + case U2P_EFUSE_INTR: + tmp = readl(com + U3P_USBPHYACR1); + val = FIELD_GET(PA1_RG_INTR_CAL, tmp); + max = FIELD_MAX(PA1_RG_INTR_CAL); + break; + + case U2P_DISCTH: + tmp = readl(com + U3P_USBPHYACR6); + val = FIELD_GET(PA6_RG_U2_DISCTH, tmp); + max = FIELD_MAX(PA6_RG_U2_DISCTH); + break; + + case U2P_PRE_EMPHASIS: + tmp = readl(com + U3P_USBPHYACR6); + val = FIELD_GET(PA6_RG_U2_PRE_EMP, tmp); + max = FIELD_MAX(PA6_RG_U2_PRE_EMP); + break; + + default: + seq_printf(sf, "invalid, %d\n", ret); + break; + } + + seq_printf(sf, "%s : %d [0, %d]\n", fname, val, max); + + return 0; +} + +static int u2_phy_params_open(struct inode *inode, struct file *file) +{ + return single_open(file, u2_phy_params_show, inode->i_private); +} + +static ssize_t u2_phy_params_write(struct file *file, const char __user *ubuf, + size_t count, loff_t *ppos) +{ + const char *fname = file_dentry(file)->d_iname; + struct seq_file *sf = file->private_data; + struct mtk_phy_instance *inst = sf->private; + struct u2phy_banks *u2_banks = &inst->u2_banks; + void __iomem *com = u2_banks->com; + ssize_t rc; + u32 val; + int ret; + + rc = kstrtouint_from_user(ubuf, USER_BUF_LEN(count), 0, &val); + if (rc) + return rc; + + ret = match_string(u2_phy_files, ARRAY_SIZE(u2_phy_files), fname); + if (ret < 0) + return (ssize_t)ret; + + switch (ret) { + case U2P_EYE_VRT: + mtk_phy_update_field(com + U3P_USBPHYACR1, PA1_RG_VRT_SEL, val); + break; + + case U2P_EYE_TERM: + mtk_phy_update_field(com + U3P_USBPHYACR1, PA1_RG_TERM_SEL, val); + break; + + case U2P_EFUSE_EN: + if (u2_banks->misc) + mtk_phy_update_field(u2_banks->misc + U3P_MISC_REG1, + MR1_EFUSE_AUTO_LOAD_DIS, !!val); + break; + + case U2P_EFUSE_INTR: + mtk_phy_update_field(com + U3P_USBPHYACR1, PA1_RG_INTR_CAL, val); + break; + + case U2P_DISCTH: + mtk_phy_update_field(com + U3P_USBPHYACR6, PA6_RG_U2_DISCTH, val); + break; + + case U2P_PRE_EMPHASIS: + mtk_phy_update_field(com + U3P_USBPHYACR6, PA6_RG_U2_PRE_EMP, val); + break; + + default: + break; + } + + return count; +} + +static const struct file_operations u2_phy_fops = { + .open = u2_phy_params_open, + .write = u2_phy_params_write, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static void u2_phy_dbgfs_files_create(struct mtk_phy_instance *inst) +{ + u32 count = ARRAY_SIZE(u2_phy_files); + int i; + + for (i = 0; i < count; i++) + debugfs_create_file(u2_phy_files[i], 0644, inst->phy->debugfs, + inst, &u2_phy_fops); +} + +static int u3_phy_params_show(struct seq_file *sf, void *unused) +{ + struct mtk_phy_instance *inst = sf->private; + const char *fname = file_dentry(sf->file)->d_iname; + struct u3phy_banks *u3_banks = &inst->u3_banks; + u32 val = 0; + u32 max = 0; + u32 tmp; + int ret; + + ret = match_string(u3_phy_files, ARRAY_SIZE(u3_phy_files), fname); + if (ret < 0) + return ret; + + switch (ret) { + case U3P_EFUSE_EN: + tmp = readl(u3_banks->phyd + U3P_U3_PHYD_RSV); + val = !!(tmp & P3D_RG_EFUSE_AUTO_LOAD_DIS); + max = 1; + break; + + case U3P_EFUSE_INTR: + tmp = readl(u3_banks->phya + U3P_U3_PHYA_REG0); + val = FIELD_GET(P3A_RG_IEXT_INTR, tmp); + max = FIELD_MAX(P3A_RG_IEXT_INTR); + break; + + case U3P_EFUSE_TX_IMP: + tmp = readl(u3_banks->phyd + U3P_U3_PHYD_IMPCAL0); + val = FIELD_GET(P3D_RG_TX_IMPEL, tmp); + max = FIELD_MAX(P3D_RG_TX_IMPEL); + break; + + case U3P_EFUSE_RX_IMP: + tmp = readl(u3_banks->phyd + U3P_U3_PHYD_IMPCAL1); + val = FIELD_GET(P3D_RG_RX_IMPEL, tmp); + max = FIELD_MAX(P3D_RG_RX_IMPEL); + break; + + default: + seq_printf(sf, "invalid, %d\n", ret); + break; + } + + seq_printf(sf, "%s : %d [0, %d]\n", fname, val, max); + + return 0; +} + +static int u3_phy_params_open(struct inode *inode, struct file *file) +{ + return single_open(file, u3_phy_params_show, inode->i_private); +} + +static ssize_t u3_phy_params_write(struct file *file, const char __user *ubuf, + size_t count, loff_t *ppos) +{ + const char *fname = file_dentry(file)->d_iname; + struct seq_file *sf = file->private_data; + struct mtk_phy_instance *inst = sf->private; + struct u3phy_banks *u3_banks = &inst->u3_banks; + void __iomem *phyd = u3_banks->phyd; + ssize_t rc; + u32 val; + int ret; + + rc = kstrtouint_from_user(ubuf, USER_BUF_LEN(count), 0, &val); + if (rc) + return rc; + + ret = match_string(u3_phy_files, ARRAY_SIZE(u3_phy_files), fname); + if (ret < 0) + return (ssize_t)ret; + + switch (ret) { + case U3P_EFUSE_EN: + mtk_phy_update_field(phyd + U3P_U3_PHYD_RSV, + P3D_RG_EFUSE_AUTO_LOAD_DIS, !!val); + break; + + case U3P_EFUSE_INTR: + mtk_phy_update_field(u3_banks->phya + U3P_U3_PHYA_REG0, + P3A_RG_IEXT_INTR, val); + break; + + case U3P_EFUSE_TX_IMP: + mtk_phy_update_field(phyd + U3P_U3_PHYD_IMPCAL0, P3D_RG_TX_IMPEL, val); + mtk_phy_set_bits(phyd + U3P_U3_PHYD_IMPCAL0, P3D_RG_FORCE_TX_IMPEL); + break; + + case U3P_EFUSE_RX_IMP: + mtk_phy_update_field(phyd + U3P_U3_PHYD_IMPCAL1, P3D_RG_RX_IMPEL, val); + mtk_phy_set_bits(phyd + U3P_U3_PHYD_IMPCAL1, P3D_RG_FORCE_RX_IMPEL); + break; + + default: + break; + } + + return count; +} + +static const struct file_operations u3_phy_fops = { + .open = u3_phy_params_open, + .write = u3_phy_params_write, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static void u3_phy_dbgfs_files_create(struct mtk_phy_instance *inst) +{ + u32 count = ARRAY_SIZE(u3_phy_files); + int i; + + for (i = 0; i < count; i++) + debugfs_create_file(u3_phy_files[i], 0644, inst->phy->debugfs, + inst, &u3_phy_fops); +} + +static int phy_type_show(struct seq_file *sf, void *unused) +{ + struct mtk_phy_instance *inst = sf->private; + const char *type; + + switch (inst->type) { + case PHY_TYPE_USB2: + type = "USB2"; + break; + case PHY_TYPE_USB3: + type = "USB3"; + break; + case PHY_TYPE_PCIE: + type = "PCIe"; + break; + case PHY_TYPE_SGMII: + type = "SGMII"; + break; + case PHY_TYPE_SATA: + type = "SATA"; + break; + default: + type = ""; + } + + seq_printf(sf, "%s\n", type); + + return 0; +} +DEFINE_SHOW_ATTRIBUTE(phy_type); + +/* these files will be removed when phy is released by phy core */ +static void phy_debugfs_init(struct mtk_phy_instance *inst) +{ + debugfs_create_file("type", 0444, inst->phy->debugfs, inst, &phy_type_fops); + + switch (inst->type) { + case PHY_TYPE_USB2: + u2_phy_dbgfs_files_create(inst); + break; + case PHY_TYPE_USB3: + case PHY_TYPE_PCIE: + u3_phy_dbgfs_files_create(inst); + break; + default: + break; + } +} + +#else + +static void phy_debugfs_init(struct mtk_phy_instance *inst) +{} + +#endif + +static void hs_slew_rate_calibrate(struct mtk_tphy *tphy, + struct mtk_phy_instance *instance) +{ + struct u2phy_banks *u2_banks = &instance->u2_banks; + void __iomem *fmreg = u2_banks->fmreg; + void __iomem *com = u2_banks->com; + int calibration_val; + int fm_out; + u32 tmp; + + /* HW V3 doesn't support slew rate cal anymore */ + if (tphy->pdata->version == MTK_PHY_V3) + return; + + /* use force value */ + if (instance->eye_src) + return; + + /* enable USB ring oscillator */ + mtk_phy_set_bits(com + U3P_USBPHYACR5, PA5_RG_U2_HSTX_SRCAL_EN); + udelay(1); + + /*enable free run clock */ + mtk_phy_set_bits(fmreg + U3P_U2FREQ_FMMONR1, P2F_RG_FRCK_EN); + + /* set cycle count as 1024, and select u2 channel */ + tmp = readl(fmreg + U3P_U2FREQ_FMCR0); + tmp &= ~(P2F_RG_CYCLECNT | P2F_RG_MONCLK_SEL); + tmp |= FIELD_PREP(P2F_RG_CYCLECNT, U3P_FM_DET_CYCLE_CNT); + if (tphy->pdata->version == MTK_PHY_V1) + tmp |= FIELD_PREP(P2F_RG_MONCLK_SEL, instance->index >> 1); + + writel(tmp, fmreg + U3P_U2FREQ_FMCR0); + + /* enable frequency meter */ + mtk_phy_set_bits(fmreg + U3P_U2FREQ_FMCR0, P2F_RG_FREQDET_EN); + + /* ignore return value */ + readl_poll_timeout(fmreg + U3P_U2FREQ_FMMONR1, tmp, + (tmp & P2F_USB_FM_VALID), 10, 200); + + fm_out = readl(fmreg + U3P_U2FREQ_VALUE); + + /* disable frequency meter */ + mtk_phy_clear_bits(fmreg + U3P_U2FREQ_FMCR0, P2F_RG_FREQDET_EN); + + /*disable free run clock */ + mtk_phy_clear_bits(fmreg + U3P_U2FREQ_FMMONR1, P2F_RG_FRCK_EN); + + if (fm_out) { + /* ( 1024 / FM_OUT ) x reference clock frequency x coef */ + tmp = tphy->src_ref_clk * tphy->src_coef; + tmp = (tmp * U3P_FM_DET_CYCLE_CNT) / fm_out; + calibration_val = DIV_ROUND_CLOSEST(tmp, U3P_SR_COEF_DIVISOR); + } else { + /* if FM detection fail, set default value */ + calibration_val = 4; + } + dev_dbg(tphy->dev, "phy:%d, fm_out:%d, calib:%d (clk:%d, coef:%d)\n", + instance->index, fm_out, calibration_val, + tphy->src_ref_clk, tphy->src_coef); + + /* set HS slew rate */ + mtk_phy_update_field(com + U3P_USBPHYACR5, PA5_RG_U2_HSTX_SRCTRL, + calibration_val); + + /* disable USB ring oscillator */ + mtk_phy_clear_bits(com + U3P_USBPHYACR5, PA5_RG_U2_HSTX_SRCAL_EN); +} + +static void u3_phy_instance_init(struct mtk_tphy *tphy, + struct mtk_phy_instance *instance) +{ + struct u3phy_banks *u3_banks = &instance->u3_banks; + void __iomem *phya = u3_banks->phya; + void __iomem *phyd = u3_banks->phyd; + + /* gating PCIe Analog XTAL clock */ + mtk_phy_set_bits(u3_banks->spllc + U3P_SPLLC_XTALCTL3, + XC3_RG_U3_XTAL_RX_PWD | XC3_RG_U3_FRC_XTAL_RX_PWD); + + /* gating XSQ */ + mtk_phy_update_field(phya + U3P_U3_PHYA_DA_REG0, P3A_RG_XTAL_EXT_EN_U3, 2); + + mtk_phy_update_field(phya + U3P_U3_PHYA_REG9, P3A_RG_RX_DAC_MUX, 4); + + mtk_phy_update_field(phya + U3P_U3_PHYA_REG6, P3A_RG_TX_EIDLE_CM, 0xe); + + mtk_phy_update_bits(u3_banks->phyd + U3P_U3_PHYD_CDR1, + P3D_RG_CDR_BIR_LTD0 | P3D_RG_CDR_BIR_LTD1, + FIELD_PREP(P3D_RG_CDR_BIR_LTD0, 0xc) | + FIELD_PREP(P3D_RG_CDR_BIR_LTD1, 0x3)); + + mtk_phy_update_field(phyd + U3P_U3_PHYD_LFPS1, P3D_RG_FWAKE_TH, 0x34); + + mtk_phy_update_field(phyd + U3P_U3_PHYD_RXDET1, P3D_RG_RXDET_STB2_SET, 0x10); + + mtk_phy_update_field(phyd + U3P_U3_PHYD_RXDET2, P3D_RG_RXDET_STB2_SET_P3, 0x10); + + dev_dbg(tphy->dev, "%s(%d)\n", __func__, instance->index); +} + +static void u2_phy_pll_26m_set(struct mtk_tphy *tphy, + struct mtk_phy_instance *instance) +{ + struct u2phy_banks *u2_banks = &instance->u2_banks; + void __iomem *com = u2_banks->com; + + if (!tphy->pdata->sw_pll_48m_to_26m) + return; + + mtk_phy_update_field(com + U3P_USBPHYACR0, PA0_USB20_PLL_PREDIV, 0); + + mtk_phy_update_field(com + U3P_USBPHYACR2, PA2_RG_U2PLL_BW, 3); + + writel(P2R_RG_U2PLL_FBDIV_26M, com + U3P_U2PHYA_RESV); + + mtk_phy_set_bits(com + U3P_U2PHYA_RESV1, + P2R_RG_U2PLL_FRA_EN | P2R_RG_U2PLL_REFCLK_SEL); +} + +static void u2_phy_instance_init(struct mtk_tphy *tphy, + struct mtk_phy_instance *instance) +{ + struct u2phy_banks *u2_banks = &instance->u2_banks; + void __iomem *com = u2_banks->com; + u32 index = instance->index; + + /* switch to USB function, and enable usb pll */ + mtk_phy_clear_bits(com + U3P_U2PHYDTM0, P2C_FORCE_UART_EN | P2C_FORCE_SUSPENDM); + + mtk_phy_clear_bits(com + U3P_U2PHYDTM0, + P2C_RG_XCVRSEL | P2C_RG_DATAIN | P2C_DTM0_PART_MASK); + + mtk_phy_clear_bits(com + U3P_U2PHYDTM1, P2C_RG_UART_EN); + + mtk_phy_set_bits(com + U3P_USBPHYACR0, PA0_RG_USB20_INTR_EN); + + /* disable switch 100uA current to SSUSB */ + mtk_phy_clear_bits(com + U3P_USBPHYACR5, PA5_RG_U2_HS_100U_U3_EN); + + mtk_phy_clear_bits(com + U3P_U2PHYACR4, P2C_U2_GPIO_CTR_MSK); + + if (tphy->pdata->avoid_rx_sen_degradation) { + if (!index) { + mtk_phy_set_bits(com + U3P_USBPHYACR2, PA2_RG_SIF_U2PLL_FORCE_EN); + + mtk_phy_clear_bits(com + U3D_U2PHYDCR0, P2C_RG_SIF_U2PLL_FORCE_ON); + } else { + mtk_phy_set_bits(com + U3D_U2PHYDCR0, P2C_RG_SIF_U2PLL_FORCE_ON); + + mtk_phy_set_bits(com + U3P_U2PHYDTM0, + P2C_RG_SUSPENDM | P2C_FORCE_SUSPENDM); + } + } + + /* DP/DM BC1.1 path Disable */ + mtk_phy_clear_bits(com + U3P_USBPHYACR6, PA6_RG_U2_BC11_SW_EN); + + mtk_phy_update_field(com + U3P_USBPHYACR6, PA6_RG_U2_SQTH, 2); + + /* Workaround only for mt8195, HW fix it for others (V3) */ + u2_phy_pll_26m_set(tphy, instance); + + dev_dbg(tphy->dev, "%s(%d)\n", __func__, index); +} + +static void u2_phy_instance_power_on(struct mtk_tphy *tphy, + struct mtk_phy_instance *instance) +{ + struct u2phy_banks *u2_banks = &instance->u2_banks; + void __iomem *com = u2_banks->com; + u32 index = instance->index; + + /* OTG Enable */ + mtk_phy_set_bits(com + U3P_USBPHYACR6, PA6_RG_U2_OTG_VBUSCMP_EN); + + mtk_phy_set_bits(com + U3P_U2PHYDTM1, P2C_RG_VBUSVALID | P2C_RG_AVALID); + + mtk_phy_clear_bits(com + U3P_U2PHYDTM1, P2C_RG_SESSEND); + + if (tphy->pdata->avoid_rx_sen_degradation && index) { + mtk_phy_set_bits(com + U3D_U2PHYDCR0, P2C_RG_SIF_U2PLL_FORCE_ON); + + mtk_phy_set_bits(com + U3P_U2PHYDTM0, P2C_RG_SUSPENDM | P2C_FORCE_SUSPENDM); + } + dev_dbg(tphy->dev, "%s(%d)\n", __func__, index); +} + +static void u2_phy_instance_power_off(struct mtk_tphy *tphy, + struct mtk_phy_instance *instance) +{ + struct u2phy_banks *u2_banks = &instance->u2_banks; + void __iomem *com = u2_banks->com; + u32 index = instance->index; + + /* OTG Disable */ + mtk_phy_clear_bits(com + U3P_USBPHYACR6, PA6_RG_U2_OTG_VBUSCMP_EN); + + mtk_phy_clear_bits(com + U3P_U2PHYDTM1, P2C_RG_VBUSVALID | P2C_RG_AVALID); + + mtk_phy_set_bits(com + U3P_U2PHYDTM1, P2C_RG_SESSEND); + + if (tphy->pdata->avoid_rx_sen_degradation && index) { + mtk_phy_clear_bits(com + U3P_U2PHYDTM0, P2C_RG_SUSPENDM | P2C_FORCE_SUSPENDM); + + mtk_phy_clear_bits(com + U3D_U2PHYDCR0, P2C_RG_SIF_U2PLL_FORCE_ON); + } + + dev_dbg(tphy->dev, "%s(%d)\n", __func__, index); +} + +static void u2_phy_instance_exit(struct mtk_tphy *tphy, + struct mtk_phy_instance *instance) +{ + struct u2phy_banks *u2_banks = &instance->u2_banks; + void __iomem *com = u2_banks->com; + u32 index = instance->index; + + if (tphy->pdata->avoid_rx_sen_degradation && index) { + mtk_phy_clear_bits(com + U3D_U2PHYDCR0, P2C_RG_SIF_U2PLL_FORCE_ON); + + mtk_phy_clear_bits(com + U3P_U2PHYDTM0, P2C_FORCE_SUSPENDM); + } +} + +static void u2_phy_instance_set_mode(struct mtk_tphy *tphy, + struct mtk_phy_instance *instance, + enum phy_mode mode) +{ + struct u2phy_banks *u2_banks = &instance->u2_banks; + u32 tmp; + + tmp = readl(u2_banks->com + U3P_U2PHYDTM1); + switch (mode) { + case PHY_MODE_USB_DEVICE: + tmp |= P2C_FORCE_IDDIG | P2C_RG_IDDIG; + break; + case PHY_MODE_USB_HOST: + tmp |= P2C_FORCE_IDDIG; + tmp &= ~P2C_RG_IDDIG; + break; + case PHY_MODE_USB_OTG: + tmp &= ~(P2C_FORCE_IDDIG | P2C_RG_IDDIG); + break; + default: + return; + } + writel(tmp, u2_banks->com + U3P_U2PHYDTM1); +} + +static void pcie_phy_instance_init(struct mtk_tphy *tphy, + struct mtk_phy_instance *instance) +{ + struct u3phy_banks *u3_banks = &instance->u3_banks; + void __iomem *phya = u3_banks->phya; + + if (tphy->pdata->version != MTK_PHY_V1) + return; + + mtk_phy_update_bits(phya + U3P_U3_PHYA_DA_REG0, + P3A_RG_XTAL_EXT_PE1H | P3A_RG_XTAL_EXT_PE2H, + FIELD_PREP(P3A_RG_XTAL_EXT_PE1H, 0x2) | + FIELD_PREP(P3A_RG_XTAL_EXT_PE2H, 0x2)); + + /* ref clk drive */ + mtk_phy_update_field(phya + U3P_U3_PHYA_REG1, P3A_RG_CLKDRV_AMP, 0x4); + + mtk_phy_update_field(phya + U3P_U3_PHYA_REG0, P3A_RG_CLKDRV_OFF, 0x1); + + /* SSC delta -5000ppm */ + mtk_phy_update_field(phya + U3P_U3_PHYA_DA_REG20, P3A_RG_PLL_DELTA1_PE2H, 0x3c); + + mtk_phy_update_field(phya + U3P_U3_PHYA_DA_REG25, P3A_RG_PLL_DELTA_PE2H, 0x36); + + /* change pll BW 0.6M */ + mtk_phy_update_bits(phya + U3P_U3_PHYA_DA_REG5, + P3A_RG_PLL_BR_PE2H | P3A_RG_PLL_IC_PE2H, + FIELD_PREP(P3A_RG_PLL_BR_PE2H, 0x1) | + FIELD_PREP(P3A_RG_PLL_IC_PE2H, 0x1)); + + mtk_phy_update_bits(phya + U3P_U3_PHYA_DA_REG4, + P3A_RG_PLL_DIVEN_PE2H | P3A_RG_PLL_BC_PE2H, + FIELD_PREP(P3A_RG_PLL_BC_PE2H, 0x3)); + + mtk_phy_update_field(phya + U3P_U3_PHYA_DA_REG6, P3A_RG_PLL_IR_PE2H, 0x2); + + mtk_phy_update_field(phya + U3P_U3_PHYA_DA_REG7, P3A_RG_PLL_BP_PE2H, 0xa); + + /* Tx Detect Rx Timing: 10us -> 5us */ + mtk_phy_update_field(u3_banks->phyd + U3P_U3_PHYD_RXDET1, + P3D_RG_RXDET_STB2_SET, 0x10); + + mtk_phy_update_field(u3_banks->phyd + U3P_U3_PHYD_RXDET2, + P3D_RG_RXDET_STB2_SET_P3, 0x10); + + /* wait for PCIe subsys register to active */ + usleep_range(2500, 3000); + dev_dbg(tphy->dev, "%s(%d)\n", __func__, instance->index); +} + +static void pcie_phy_instance_power_on(struct mtk_tphy *tphy, + struct mtk_phy_instance *instance) +{ + struct u3phy_banks *bank = &instance->u3_banks; + + mtk_phy_clear_bits(bank->chip + U3P_U3_CHIP_GPIO_CTLD, + P3C_FORCE_IP_SW_RST | P3C_REG_IP_SW_RST); + + mtk_phy_clear_bits(bank->chip + U3P_U3_CHIP_GPIO_CTLE, + P3C_RG_SWRST_U3_PHYD_FORCE_EN | P3C_RG_SWRST_U3_PHYD); +} + +static void pcie_phy_instance_power_off(struct mtk_tphy *tphy, + struct mtk_phy_instance *instance) + +{ + struct u3phy_banks *bank = &instance->u3_banks; + + mtk_phy_set_bits(bank->chip + U3P_U3_CHIP_GPIO_CTLD, + P3C_FORCE_IP_SW_RST | P3C_REG_IP_SW_RST); + + mtk_phy_set_bits(bank->chip + U3P_U3_CHIP_GPIO_CTLE, + P3C_RG_SWRST_U3_PHYD_FORCE_EN | P3C_RG_SWRST_U3_PHYD); +} + +static void sata_phy_instance_init(struct mtk_tphy *tphy, + struct mtk_phy_instance *instance) +{ + struct u3phy_banks *u3_banks = &instance->u3_banks; + void __iomem *phyd = u3_banks->phyd; + + /* charge current adjustment */ + mtk_phy_update_bits(phyd + ANA_RG_CTRL_SIGNAL6, + RG_CDR_BIRLTR_GEN1_MSK | RG_CDR_BC_GEN1_MSK, + FIELD_PREP(RG_CDR_BIRLTR_GEN1_MSK, 0x6) | + FIELD_PREP(RG_CDR_BC_GEN1_MSK, 0x1a)); + + mtk_phy_update_field(phyd + ANA_EQ_EYE_CTRL_SIGNAL4, RG_CDR_BIRLTD0_GEN1_MSK, 0x18); + + mtk_phy_update_field(phyd + ANA_EQ_EYE_CTRL_SIGNAL5, RG_CDR_BIRLTD0_GEN3_MSK, 0x06); + + mtk_phy_update_bits(phyd + ANA_RG_CTRL_SIGNAL4, + RG_CDR_BICLTR_GEN1_MSK | RG_CDR_BR_GEN2_MSK, + FIELD_PREP(RG_CDR_BICLTR_GEN1_MSK, 0x0c) | + FIELD_PREP(RG_CDR_BR_GEN2_MSK, 0x07)); + + mtk_phy_update_bits(phyd + PHYD_CTRL_SIGNAL_MODE4, + RG_CDR_BICLTD0_GEN1_MSK | RG_CDR_BICLTD1_GEN1_MSK, + FIELD_PREP(RG_CDR_BICLTD0_GEN1_MSK, 0x08) | + FIELD_PREP(RG_CDR_BICLTD1_GEN1_MSK, 0x02)); + + mtk_phy_update_field(phyd + PHYD_DESIGN_OPTION2, RG_LOCK_CNT_SEL_MSK, 0x02); + + mtk_phy_update_bits(phyd + PHYD_DESIGN_OPTION9, + RG_T2_MIN_MSK | RG_TG_MIN_MSK, + FIELD_PREP(RG_T2_MIN_MSK, 0x12) | + FIELD_PREP(RG_TG_MIN_MSK, 0x04)); + + mtk_phy_update_bits(phyd + PHYD_DESIGN_OPTION9, + RG_T2_MAX_MSK | RG_TG_MAX_MSK, + FIELD_PREP(RG_T2_MAX_MSK, 0x31) | + FIELD_PREP(RG_TG_MAX_MSK, 0x0e)); + + mtk_phy_update_field(phyd + ANA_RG_CTRL_SIGNAL1, RG_IDRV_0DB_GEN1_MSK, 0x20); + + mtk_phy_update_field(phyd + ANA_EQ_EYE_CTRL_SIGNAL1, RG_EQ_DLEQ_LFI_GEN1_MSK, 0x03); + + dev_dbg(tphy->dev, "%s(%d)\n", __func__, instance->index); +} + +static void phy_v1_banks_init(struct mtk_tphy *tphy, + struct mtk_phy_instance *instance) +{ + struct u2phy_banks *u2_banks = &instance->u2_banks; + struct u3phy_banks *u3_banks = &instance->u3_banks; + + switch (instance->type) { + case PHY_TYPE_USB2: + u2_banks->misc = NULL; + u2_banks->fmreg = tphy->sif_base + SSUSB_SIFSLV_V1_U2FREQ; + u2_banks->com = instance->port_base + SSUSB_SIFSLV_V1_U2PHY_COM; + break; + case PHY_TYPE_USB3: + case PHY_TYPE_PCIE: + u3_banks->spllc = tphy->sif_base + SSUSB_SIFSLV_V1_SPLLC; + u3_banks->chip = tphy->sif_base + SSUSB_SIFSLV_V1_CHIP; + u3_banks->phyd = instance->port_base + SSUSB_SIFSLV_V1_U3PHYD; + u3_banks->phya = instance->port_base + SSUSB_SIFSLV_V1_U3PHYA; + break; + case PHY_TYPE_SATA: + u3_banks->phyd = instance->port_base + SSUSB_SIFSLV_V1_U3PHYD; + break; + default: + dev_err(tphy->dev, "incompatible PHY type\n"); + return; + } +} + +static void phy_v2_banks_init(struct mtk_tphy *tphy, + struct mtk_phy_instance *instance) +{ + struct u2phy_banks *u2_banks = &instance->u2_banks; + struct u3phy_banks *u3_banks = &instance->u3_banks; + + switch (instance->type) { + case PHY_TYPE_USB2: + u2_banks->misc = instance->port_base + SSUSB_SIFSLV_V2_MISC; + u2_banks->fmreg = instance->port_base + SSUSB_SIFSLV_V2_U2FREQ; + u2_banks->com = instance->port_base + SSUSB_SIFSLV_V2_U2PHY_COM; + break; + case PHY_TYPE_USB3: + case PHY_TYPE_PCIE: + u3_banks->spllc = instance->port_base + SSUSB_SIFSLV_V2_SPLLC; + u3_banks->chip = instance->port_base + SSUSB_SIFSLV_V2_CHIP; + u3_banks->phyd = instance->port_base + SSUSB_SIFSLV_V2_U3PHYD; + u3_banks->phya = instance->port_base + SSUSB_SIFSLV_V2_U3PHYA; + break; + default: + dev_err(tphy->dev, "incompatible PHY type\n"); + return; + } +} + +static void phy_parse_property(struct mtk_tphy *tphy, + struct mtk_phy_instance *instance) +{ + struct device *dev = &instance->phy->dev; + + if (instance->type != PHY_TYPE_USB2) + return; + + instance->bc12_en = device_property_read_bool(dev, "mediatek,bc12"); + device_property_read_u32(dev, "mediatek,eye-src", + &instance->eye_src); + device_property_read_u32(dev, "mediatek,eye-vrt", + &instance->eye_vrt); + device_property_read_u32(dev, "mediatek,eye-term", + &instance->eye_term); + device_property_read_u32(dev, "mediatek,intr", + &instance->intr); + device_property_read_u32(dev, "mediatek,discth", + &instance->discth); + device_property_read_u32(dev, "mediatek,pre-emphasis", + &instance->pre_emphasis); + dev_dbg(dev, "bc12:%d, src:%d, vrt:%d, term:%d, intr:%d, disc:%d\n", + instance->bc12_en, instance->eye_src, + instance->eye_vrt, instance->eye_term, + instance->intr, instance->discth); + dev_dbg(dev, "pre-emp:%d\n", instance->pre_emphasis); +} + +static void u2_phy_props_set(struct mtk_tphy *tphy, + struct mtk_phy_instance *instance) +{ + struct u2phy_banks *u2_banks = &instance->u2_banks; + void __iomem *com = u2_banks->com; + + if (instance->bc12_en) /* BC1.2 path Enable */ + mtk_phy_set_bits(com + U3P_U2PHYBC12C, P2C_RG_CHGDT_EN); + + if (tphy->pdata->version < MTK_PHY_V3 && instance->eye_src) + mtk_phy_update_field(com + U3P_USBPHYACR5, PA5_RG_U2_HSTX_SRCTRL, + instance->eye_src); + + if (instance->eye_vrt) + mtk_phy_update_field(com + U3P_USBPHYACR1, PA1_RG_VRT_SEL, + instance->eye_vrt); + + if (instance->eye_term) + mtk_phy_update_field(com + U3P_USBPHYACR1, PA1_RG_TERM_SEL, + instance->eye_term); + + if (instance->intr) { + if (u2_banks->misc) + mtk_phy_set_bits(u2_banks->misc + U3P_MISC_REG1, + MR1_EFUSE_AUTO_LOAD_DIS); + + mtk_phy_update_field(com + U3P_USBPHYACR1, PA1_RG_INTR_CAL, + instance->intr); + } + + if (instance->discth) + mtk_phy_update_field(com + U3P_USBPHYACR6, PA6_RG_U2_DISCTH, + instance->discth); + + if (instance->pre_emphasis) + mtk_phy_update_field(com + U3P_USBPHYACR6, PA6_RG_U2_PRE_EMP, + instance->pre_emphasis); +} + +/* type switch for usb3/pcie/sgmii/sata */ +static int phy_type_syscon_get(struct mtk_phy_instance *instance, + struct device_node *dn) +{ + struct of_phandle_args args; + int ret; + + /* type switch function is optional */ + if (!of_property_read_bool(dn, "mediatek,syscon-type")) + return 0; + + ret = of_parse_phandle_with_fixed_args(dn, "mediatek,syscon-type", + 2, 0, &args); + if (ret) + return ret; + + instance->type_sw_reg = args.args[0]; + instance->type_sw_index = args.args[1] & 0x3; /* <=3 */ + instance->type_sw = syscon_node_to_regmap(args.np); + of_node_put(args.np); + dev_info(&instance->phy->dev, "type_sw - reg %#x, index %d\n", + instance->type_sw_reg, instance->type_sw_index); + + return PTR_ERR_OR_ZERO(instance->type_sw); +} + +static int phy_type_set(struct mtk_phy_instance *instance) +{ + int type; + u32 offset; + + if (!instance->type_sw) + return 0; + + switch (instance->type) { + case PHY_TYPE_USB3: + type = RG_PHY_SW_USB3; + break; + case PHY_TYPE_PCIE: + type = RG_PHY_SW_PCIE; + break; + case PHY_TYPE_SGMII: + type = RG_PHY_SW_SGMII; + break; + case PHY_TYPE_SATA: + type = RG_PHY_SW_SATA; + break; + case PHY_TYPE_USB2: + default: + return 0; + } + + offset = instance->type_sw_index * BITS_PER_BYTE; + regmap_update_bits(instance->type_sw, instance->type_sw_reg, + RG_PHY_SW_TYPE << offset, type << offset); + + return 0; +} + +static int phy_efuse_get(struct mtk_tphy *tphy, struct mtk_phy_instance *instance) +{ + struct device *dev = &instance->phy->dev; + int ret = 0; + + /* tphy v1 doesn't support sw efuse, skip it */ + if (!tphy->pdata->sw_efuse_supported) { + instance->efuse_sw_en = 0; + return 0; + } + + /* software efuse is optional */ + instance->efuse_sw_en = device_property_read_bool(dev, "nvmem-cells"); + if (!instance->efuse_sw_en) + return 0; + + switch (instance->type) { + case PHY_TYPE_USB2: + ret = nvmem_cell_read_variable_le_u32(dev, "intr", &instance->efuse_intr); + if (ret) { + dev_err(dev, "fail to get u2 intr efuse, %d\n", ret); + break; + } + + /* no efuse, ignore it */ + if (!instance->efuse_intr) { + dev_warn(dev, "no u2 intr efuse, but dts enable it\n"); + instance->efuse_sw_en = 0; + break; + } + + dev_dbg(dev, "u2 efuse - intr %x\n", instance->efuse_intr); + break; + + case PHY_TYPE_USB3: + case PHY_TYPE_PCIE: + ret = nvmem_cell_read_variable_le_u32(dev, "intr", &instance->efuse_intr); + if (ret) { + dev_err(dev, "fail to get u3 intr efuse, %d\n", ret); + break; + } + + ret = nvmem_cell_read_variable_le_u32(dev, "rx_imp", &instance->efuse_rx_imp); + if (ret) { + dev_err(dev, "fail to get u3 rx_imp efuse, %d\n", ret); + break; + } + + ret = nvmem_cell_read_variable_le_u32(dev, "tx_imp", &instance->efuse_tx_imp); + if (ret) { + dev_err(dev, "fail to get u3 tx_imp efuse, %d\n", ret); + break; + } + + /* no efuse, ignore it */ + if (!instance->efuse_intr && + !instance->efuse_rx_imp && + !instance->efuse_tx_imp) { + dev_warn(dev, "no u3 intr efuse, but dts enable it\n"); + instance->efuse_sw_en = 0; + break; + } + + dev_dbg(dev, "u3 efuse - intr %x, rx_imp %x, tx_imp %x\n", + instance->efuse_intr, instance->efuse_rx_imp,instance->efuse_tx_imp); + break; + default: + dev_err(dev, "no sw efuse for type %d\n", instance->type); + ret = -EINVAL; + } + + return ret; +} + +static void phy_efuse_set(struct mtk_phy_instance *instance) +{ + struct device *dev = &instance->phy->dev; + struct u2phy_banks *u2_banks = &instance->u2_banks; + struct u3phy_banks *u3_banks = &instance->u3_banks; + + if (!instance->efuse_sw_en) + return; + + switch (instance->type) { + case PHY_TYPE_USB2: + mtk_phy_set_bits(u2_banks->misc + U3P_MISC_REG1, MR1_EFUSE_AUTO_LOAD_DIS); + + mtk_phy_update_field(u2_banks->com + U3P_USBPHYACR1, PA1_RG_INTR_CAL, + instance->efuse_intr); + break; + case PHY_TYPE_USB3: + case PHY_TYPE_PCIE: + mtk_phy_set_bits(u3_banks->phyd + U3P_U3_PHYD_RSV, P3D_RG_EFUSE_AUTO_LOAD_DIS); + + mtk_phy_update_field(u3_banks->phyd + U3P_U3_PHYD_IMPCAL0, P3D_RG_TX_IMPEL, + instance->efuse_tx_imp); + mtk_phy_set_bits(u3_banks->phyd + U3P_U3_PHYD_IMPCAL0, P3D_RG_FORCE_TX_IMPEL); + + mtk_phy_update_field(u3_banks->phyd + U3P_U3_PHYD_IMPCAL1, P3D_RG_RX_IMPEL, + instance->efuse_rx_imp); + mtk_phy_set_bits(u3_banks->phyd + U3P_U3_PHYD_IMPCAL1, P3D_RG_FORCE_RX_IMPEL); + + mtk_phy_update_field(u3_banks->phya + U3P_U3_PHYA_REG0, P3A_RG_IEXT_INTR, + instance->efuse_intr); + break; + default: + dev_warn(dev, "no sw efuse for type %d\n", instance->type); + break; + } +} + +static int mtk_phy_init(struct phy *phy) +{ + struct mtk_phy_instance *instance = phy_get_drvdata(phy); + struct mtk_tphy *tphy = dev_get_drvdata(phy->dev.parent); + int ret; + + ret = clk_bulk_prepare_enable(TPHY_CLKS_CNT, instance->clks); + if (ret) + return ret; + + phy_efuse_set(instance); + + switch (instance->type) { + case PHY_TYPE_USB2: + u2_phy_instance_init(tphy, instance); + u2_phy_props_set(tphy, instance); + break; + case PHY_TYPE_USB3: + u3_phy_instance_init(tphy, instance); + break; + case PHY_TYPE_PCIE: + pcie_phy_instance_init(tphy, instance); + break; + case PHY_TYPE_SATA: + sata_phy_instance_init(tphy, instance); + break; + case PHY_TYPE_SGMII: + /* nothing to do, only used to set type */ + break; + default: + dev_err(tphy->dev, "incompatible PHY type\n"); + clk_bulk_disable_unprepare(TPHY_CLKS_CNT, instance->clks); + return -EINVAL; + } + + return 0; +} + +static int mtk_phy_power_on(struct phy *phy) +{ + struct mtk_phy_instance *instance = phy_get_drvdata(phy); + struct mtk_tphy *tphy = dev_get_drvdata(phy->dev.parent); + + if (instance->type == PHY_TYPE_USB2) { + u2_phy_instance_power_on(tphy, instance); + hs_slew_rate_calibrate(tphy, instance); + } else if (instance->type == PHY_TYPE_PCIE) { + pcie_phy_instance_power_on(tphy, instance); + } + + return 0; +} + +static int mtk_phy_power_off(struct phy *phy) +{ + struct mtk_phy_instance *instance = phy_get_drvdata(phy); + struct mtk_tphy *tphy = dev_get_drvdata(phy->dev.parent); + + if (instance->type == PHY_TYPE_USB2) + u2_phy_instance_power_off(tphy, instance); + else if (instance->type == PHY_TYPE_PCIE) + pcie_phy_instance_power_off(tphy, instance); + + return 0; +} + +static int mtk_phy_exit(struct phy *phy) +{ + struct mtk_phy_instance *instance = phy_get_drvdata(phy); + struct mtk_tphy *tphy = dev_get_drvdata(phy->dev.parent); + + if (instance->type == PHY_TYPE_USB2) + u2_phy_instance_exit(tphy, instance); + + clk_bulk_disable_unprepare(TPHY_CLKS_CNT, instance->clks); + return 0; +} + +static int mtk_phy_set_mode(struct phy *phy, enum phy_mode mode, int submode) +{ + struct mtk_phy_instance *instance = phy_get_drvdata(phy); + struct mtk_tphy *tphy = dev_get_drvdata(phy->dev.parent); + + if (instance->type == PHY_TYPE_USB2) + u2_phy_instance_set_mode(tphy, instance, mode); + + return 0; +} + +static struct phy *mtk_phy_xlate(struct device *dev, + struct of_phandle_args *args) +{ + struct mtk_tphy *tphy = dev_get_drvdata(dev); + struct mtk_phy_instance *instance = NULL; + struct device_node *phy_np = args->np; + int index; + int ret; + + if (args->args_count != 1) { + dev_err(dev, "invalid number of cells in 'phy' property\n"); + return ERR_PTR(-EINVAL); + } + + for (index = 0; index < tphy->nphys; index++) + if (phy_np == tphy->phys[index]->phy->dev.of_node) { + instance = tphy->phys[index]; + break; + } + + if (!instance) { + dev_err(dev, "failed to find appropriate phy\n"); + return ERR_PTR(-EINVAL); + } + + instance->type = args->args[0]; + if (!(instance->type == PHY_TYPE_USB2 || + instance->type == PHY_TYPE_USB3 || + instance->type == PHY_TYPE_PCIE || + instance->type == PHY_TYPE_SATA || + instance->type == PHY_TYPE_SGMII)) { + dev_err(dev, "unsupported device type: %d\n", instance->type); + return ERR_PTR(-EINVAL); + } + + switch (tphy->pdata->version) { + case MTK_PHY_V1: + phy_v1_banks_init(tphy, instance); + break; + case MTK_PHY_V2: + case MTK_PHY_V3: + phy_v2_banks_init(tphy, instance); + break; + default: + dev_err(dev, "phy version is not supported\n"); + return ERR_PTR(-EINVAL); + } + + ret = phy_efuse_get(tphy, instance); + if (ret) + return ERR_PTR(ret); + + phy_parse_property(tphy, instance); + phy_type_set(instance); + phy_debugfs_init(instance); + + return instance->phy; +} + +static const struct phy_ops mtk_tphy_ops = { + .init = mtk_phy_init, + .exit = mtk_phy_exit, + .power_on = mtk_phy_power_on, + .power_off = mtk_phy_power_off, + .set_mode = mtk_phy_set_mode, + .owner = THIS_MODULE, +}; + +static const struct mtk_phy_pdata tphy_v1_pdata = { + .avoid_rx_sen_degradation = false, + .version = MTK_PHY_V1, +}; + +static const struct mtk_phy_pdata tphy_v2_pdata = { + .avoid_rx_sen_degradation = false, + .sw_efuse_supported = true, + .version = MTK_PHY_V2, +}; + +static const struct mtk_phy_pdata tphy_v3_pdata = { + .sw_efuse_supported = true, + .version = MTK_PHY_V3, +}; + +static const struct mtk_phy_pdata mt8173_pdata = { + .avoid_rx_sen_degradation = true, + .version = MTK_PHY_V1, +}; + +static const struct mtk_phy_pdata mt8195_pdata = { + .sw_pll_48m_to_26m = true, + .sw_efuse_supported = true, + .version = MTK_PHY_V3, +}; + +static const struct of_device_id mtk_tphy_id_table[] = { + { .compatible = "mediatek,mt2701-u3phy", .data = &tphy_v1_pdata }, + { .compatible = "mediatek,mt2712-u3phy", .data = &tphy_v2_pdata }, + { .compatible = "mediatek,mt8173-u3phy", .data = &mt8173_pdata }, + { .compatible = "mediatek,mt8195-tphy", .data = &mt8195_pdata }, + { .compatible = "mediatek,generic-tphy-v1", .data = &tphy_v1_pdata }, + { .compatible = "mediatek,generic-tphy-v2", .data = &tphy_v2_pdata }, + { .compatible = "mediatek,generic-tphy-v3", .data = &tphy_v3_pdata }, + { }, +}; +MODULE_DEVICE_TABLE(of, mtk_tphy_id_table); + +static int mtk_tphy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct device_node *child_np; + struct phy_provider *provider; + struct resource *sif_res; + struct mtk_tphy *tphy; + struct resource res; + int port, retval; + + tphy = devm_kzalloc(dev, sizeof(*tphy), GFP_KERNEL); + if (!tphy) + return -ENOMEM; + + tphy->pdata = of_device_get_match_data(dev); + if (!tphy->pdata) + return -EINVAL; + + tphy->nphys = of_get_child_count(np); + tphy->phys = devm_kcalloc(dev, tphy->nphys, + sizeof(*tphy->phys), GFP_KERNEL); + if (!tphy->phys) + return -ENOMEM; + + tphy->dev = dev; + platform_set_drvdata(pdev, tphy); + + sif_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + /* SATA phy of V1 needn't it if not shared with PCIe or USB */ + if (sif_res && tphy->pdata->version == MTK_PHY_V1) { + /* get banks shared by multiple phys */ + tphy->sif_base = devm_ioremap_resource(dev, sif_res); + if (IS_ERR(tphy->sif_base)) { + dev_err(dev, "failed to remap sif regs\n"); + return PTR_ERR(tphy->sif_base); + } + } + + if (tphy->pdata->version < MTK_PHY_V3) { + tphy->src_ref_clk = U3P_REF_CLK; + tphy->src_coef = U3P_SLEW_RATE_COEF; + /* update parameters of slew rate calibrate if exist */ + device_property_read_u32(dev, "mediatek,src-ref-clk-mhz", + &tphy->src_ref_clk); + device_property_read_u32(dev, "mediatek,src-coef", + &tphy->src_coef); + } + + port = 0; + for_each_child_of_node(np, child_np) { + struct mtk_phy_instance *instance; + struct clk_bulk_data *clks; + struct device *subdev; + struct phy *phy; + + instance = devm_kzalloc(dev, sizeof(*instance), GFP_KERNEL); + if (!instance) { + retval = -ENOMEM; + goto put_child; + } + + tphy->phys[port] = instance; + + phy = devm_phy_create(dev, child_np, &mtk_tphy_ops); + if (IS_ERR(phy)) { + dev_err(dev, "failed to create phy\n"); + retval = PTR_ERR(phy); + goto put_child; + } + + subdev = &phy->dev; + retval = of_address_to_resource(child_np, 0, &res); + if (retval) { + dev_err(subdev, "failed to get address resource(id-%d)\n", + port); + goto put_child; + } + + instance->port_base = devm_ioremap_resource(subdev, &res); + if (IS_ERR(instance->port_base)) { + retval = PTR_ERR(instance->port_base); + goto put_child; + } + + instance->phy = phy; + instance->index = port; + phy_set_drvdata(phy, instance); + port++; + + clks = instance->clks; + clks[0].id = "ref"; /* digital (& analog) clock */ + clks[1].id = "da_ref"; /* analog clock */ + retval = devm_clk_bulk_get_optional(subdev, TPHY_CLKS_CNT, clks); + if (retval) + goto put_child; + + retval = phy_type_syscon_get(instance, child_np); + if (retval) + goto put_child; + } + + provider = devm_of_phy_provider_register(dev, mtk_phy_xlate); + + return PTR_ERR_OR_ZERO(provider); +put_child: + of_node_put(child_np); + return retval; +} + +static struct platform_driver mtk_tphy_driver = { + .probe = mtk_tphy_probe, + .driver = { + .name = "mtk-tphy", + .of_match_table = mtk_tphy_id_table, + }, +}; + +module_platform_driver(mtk_tphy_driver); + +MODULE_AUTHOR("Chunfeng Yun <chunfeng.yun@mediatek.com>"); +MODULE_DESCRIPTION("MediaTek T-PHY driver"); +MODULE_LICENSE("GPL v2"); |