diff options
Diffstat (limited to 'drivers/phy/mediatek/phy-mtk-tphy.c')
-rw-r--r-- | drivers/phy/mediatek/phy-mtk-tphy.c | 25 |
1 files changed, 25 insertions, 0 deletions
diff --git a/drivers/phy/mediatek/phy-mtk-tphy.c b/drivers/phy/mediatek/phy-mtk-tphy.c index 05eab90141..a4746f6cb8 100644 --- a/drivers/phy/mediatek/phy-mtk-tphy.c +++ b/drivers/phy/mediatek/phy-mtk-tphy.c @@ -185,6 +185,10 @@ #define P3D_RG_CDR_BIR_LTD1 GENMASK(28, 24) #define P3D_RG_CDR_BIR_LTD0 GENMASK(12, 8) +#define U3P_U3_PHYD_TOP1 0x100 +#define P3D_RG_PHY_MODE GENMASK(2, 1) +#define P3D_RG_FORCE_PHY_MODE BIT(0) + #define U3P_U3_PHYD_RXDET1 0x128 #define P3D_RG_RXDET_STB2_SET GENMASK(17, 9) @@ -327,6 +331,7 @@ struct mtk_phy_instance { int discth; int pre_emphasis; bool bc12_en; + bool type_force_mode; }; struct mtk_tphy { @@ -768,6 +773,23 @@ static void u3_phy_instance_init(struct mtk_tphy *tphy, void __iomem *phya = u3_banks->phya; void __iomem *phyd = u3_banks->phyd; + if (instance->type_force_mode) { + /* force phy as usb mode, default is pcie rc mode */ + mtk_phy_update_field(phyd + U3P_U3_PHYD_TOP1, P3D_RG_PHY_MODE, 1); + mtk_phy_set_bits(phyd + U3P_U3_PHYD_TOP1, P3D_RG_FORCE_PHY_MODE); + /* power down phy by ip and pipe reset */ + mtk_phy_set_bits(u3_banks->chip + U3P_U3_CHIP_GPIO_CTLD, + P3C_FORCE_IP_SW_RST | P3C_MCU_BUS_CK_GATE_EN); + mtk_phy_set_bits(u3_banks->chip + U3P_U3_CHIP_GPIO_CTLE, + P3C_RG_SWRST_U3_PHYD | P3C_RG_SWRST_U3_PHYD_FORCE_EN); + udelay(10); + /* power on phy again */ + mtk_phy_clear_bits(u3_banks->chip + U3P_U3_CHIP_GPIO_CTLD, + P3C_FORCE_IP_SW_RST | P3C_MCU_BUS_CK_GATE_EN); + mtk_phy_clear_bits(u3_banks->chip + U3P_U3_CHIP_GPIO_CTLE, + P3C_RG_SWRST_U3_PHYD | P3C_RG_SWRST_U3_PHYD_FORCE_EN); + } + /* gating PCIe Analog XTAL clock */ mtk_phy_set_bits(u3_banks->spllc + U3P_SPLLC_XTALCTL3, XC3_RG_U3_XTAL_RX_PWD | XC3_RG_U3_FRC_XTAL_RX_PWD); @@ -1120,6 +1142,9 @@ static void phy_parse_property(struct mtk_tphy *tphy, { struct device *dev = &instance->phy->dev; + if (instance->type == PHY_TYPE_USB3) + instance->type_force_mode = device_property_read_bool(dev, "mediatek,force-mode"); + if (instance->type != PHY_TYPE_USB2) return; |