summaryrefslogtreecommitdiffstats
path: root/drivers/phy/qualcomm/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/phy/qualcomm/Kconfig')
-rw-r--r--drivers/phy/qualcomm/Kconfig220
1 files changed, 220 insertions, 0 deletions
diff --git a/drivers/phy/qualcomm/Kconfig b/drivers/phy/qualcomm/Kconfig
new file mode 100644
index 0000000000..d891058b7c
--- /dev/null
+++ b/drivers/phy/qualcomm/Kconfig
@@ -0,0 +1,220 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Phy drivers for Qualcomm and Atheros platforms
+#
+config PHY_ATH79_USB
+ tristate "Atheros AR71XX/9XXX USB PHY driver"
+ depends on OF && (ATH79 || COMPILE_TEST)
+ default y if USB_EHCI_HCD_PLATFORM || USB_OHCI_HCD_PLATFORM
+ select RESET_CONTROLLER
+ select GENERIC_PHY
+ help
+ Enable this to support the USB PHY on Atheros AR71XX/9XXX SoCs.
+
+config PHY_QCOM_APQ8064_SATA
+ tristate "Qualcomm APQ8064 SATA SerDes/PHY driver"
+ depends on ARCH_QCOM
+ depends on HAS_IOMEM
+ depends on OF
+ select GENERIC_PHY
+
+config PHY_QCOM_EDP
+ tristate "Qualcomm eDP PHY driver"
+ depends on ARCH_QCOM || COMPILE_TEST
+ depends on OF
+ depends on COMMON_CLK
+ select GENERIC_PHY
+ help
+ Enable this driver to support the Qualcomm eDP PHY found in various
+ Qualcomm chipsets.
+
+config PHY_QCOM_IPQ4019_USB
+ tristate "Qualcomm IPQ4019 USB PHY driver"
+ depends on OF && (ARCH_QCOM || COMPILE_TEST)
+ select GENERIC_PHY
+ help
+ Support for the USB PHY-s on Qualcomm IPQ40xx SoC-s.
+
+config PHY_QCOM_IPQ806X_SATA
+ tristate "Qualcomm IPQ806x SATA SerDes/PHY driver"
+ depends on ARCH_QCOM
+ depends on HAS_IOMEM
+ depends on OF
+ select GENERIC_PHY
+
+config PHY_QCOM_PCIE2
+ tristate "Qualcomm PCIe Gen2 PHY Driver"
+ depends on OF && COMMON_CLK && (ARCH_QCOM || COMPILE_TEST)
+ select GENERIC_PHY
+ help
+ Enable this to support the Qualcomm PCIe PHY, used with the Synopsys
+ based PCIe controller.
+
+menuconfig PHY_QCOM_QMP
+ tristate "Qualcomm QMP PHY Drivers"
+ depends on OF && COMMON_CLK && (ARCH_QCOM || COMPILE_TEST)
+
+if PHY_QCOM_QMP
+
+config PHY_QCOM_QMP_COMBO
+ tristate "Qualcomm QMP Combo PHY Driver"
+ default PHY_QCOM_QMP
+ depends on TYPEC || TYPEC=n
+ depends on DRM || DRM=n
+ select GENERIC_PHY
+ select MFD_SYSCON
+ select DRM_PANEL_BRIDGE if DRM
+ help
+ Enable this to support the QMP Combo PHY transceiver that is used
+ with USB3 and DisplayPort controllers on Qualcomm chips.
+
+config PHY_QCOM_QMP_PCIE
+ tristate "Qualcomm QMP PCIe PHY Driver"
+ depends on PCI || COMPILE_TEST
+ select GENERIC_PHY
+ default PHY_QCOM_QMP
+ help
+ Enable this to support the QMP PCIe PHY transceiver that is used
+ with PCIe controllers on Qualcomm chips.
+
+config PHY_QCOM_QMP_PCIE_8996
+ tristate "Qualcomm QMP PCIe 8996 PHY Driver"
+ depends on PCI || COMPILE_TEST
+ select GENERIC_PHY
+ default PHY_QCOM_QMP
+ help
+ Enable this to support the QMP PCIe PHY transceiver that is used
+ with PCIe controllers on Qualcomm msm8996 chips.
+
+config PHY_QCOM_QMP_UFS
+ tristate "Qualcomm QMP UFS PHY Driver"
+ select GENERIC_PHY
+ default PHY_QCOM_QMP
+ help
+ Enable this to support the QMP UFS PHY transceiver that is used
+ with UFS controllers on Qualcomm chips.
+
+config PHY_QCOM_QMP_USB
+ tristate "Qualcomm QMP USB PHY Driver"
+ select GENERIC_PHY
+ default PHY_QCOM_QMP
+ help
+ Enable this to support the QMP USB PHY transceiver that is used
+ with USB3 controllers on Qualcomm chips.
+
+config PHY_QCOM_QMP_USB_LEGACY
+ tristate "Qualcomm QMP legacy USB PHY Driver"
+ select GENERIC_PHY
+ default n
+ help
+ Enable this legacy driver to support the QMP USB+DisplayPort Combo
+ PHY transceivers working only in USB3 mode on Qualcomm chips. This
+ driver exists only for compatibility with older device trees,
+ existing users have been migrated to PHY_QCOM_QMP_COMBO driver.
+
+endif # PHY_QCOM_QMP
+
+config PHY_QCOM_QUSB2
+ tristate "Qualcomm QUSB2 PHY Driver"
+ depends on OF && (ARCH_QCOM || COMPILE_TEST)
+ depends on NVMEM || !NVMEM
+ select GENERIC_PHY
+ help
+ Enable this to support the HighSpeed QUSB2 PHY transceiver for USB
+ controllers on Qualcomm chips. This driver supports the high-speed
+ PHY which is usually paired with either the ChipIdea or Synopsys DWC3
+ USB IPs on MSM SOCs.
+
+config PHY_QCOM_SNPS_EUSB2
+ tristate "Qualcomm SNPS eUSB2 PHY Driver"
+ depends on OF && (ARCH_QCOM || COMPILE_TEST)
+ select GENERIC_PHY
+ help
+ Enable support for the USB high-speed SNPS eUSB2 phy on Qualcomm
+ chipsets. The PHY is paired with a Synopsys DWC3 USB controller
+ on Qualcomm SOCs.
+
+config PHY_QCOM_EUSB2_REPEATER
+ tristate "Qualcomm SNPS eUSB2 Repeater Driver"
+ depends on OF && (ARCH_QCOM || COMPILE_TEST)
+ select GENERIC_PHY
+ help
+ Enable support for the USB high-speed SNPS eUSB2 repeater on Qualcomm
+ PMICs. The repeater is paired with a Synopsys eUSB2 Phy
+ on Qualcomm SOCs.
+
+config PHY_QCOM_M31_USB
+ tristate "Qualcomm M31 HS PHY driver support"
+ depends on USB && (ARCH_QCOM || COMPILE_TEST)
+ select GENERIC_PHY
+ help
+ Enable this to support M31 HS PHY transceivers on Qualcomm chips
+ with DWC3 USB core. It handles PHY initialization, clock
+ management required after resetting the hardware and power
+ management. This driver is required even for peripheral only or
+ host only mode configurations.
+
+config PHY_QCOM_USB_HS
+ tristate "Qualcomm USB HS PHY module"
+ depends on USB_ULPI_BUS
+ depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in
+ select GENERIC_PHY
+ help
+ Support for the USB high-speed ULPI compliant phy on Qualcomm
+ chipsets.
+
+config PHY_QCOM_USB_SNPS_FEMTO_V2
+ tristate "Qualcomm SNPS FEMTO USB HS PHY V2 module"
+ depends on OF && (ARCH_QCOM || COMPILE_TEST)
+ select GENERIC_PHY
+ help
+ Enable support for the USB high-speed SNPS Femto phy on Qualcomm
+ chipsets. This PHY has differences in the register map compared
+ to the V1 variants. The PHY is paired with a Synopsys DWC3 USB
+ controller on Qualcomm SOCs.
+
+config PHY_QCOM_USB_HSIC
+ tristate "Qualcomm USB HSIC ULPI PHY module"
+ depends on USB_ULPI_BUS
+ select GENERIC_PHY
+ help
+ Support for the USB HSIC ULPI compliant PHY on QCOM chipsets.
+
+config PHY_QCOM_USB_HS_28NM
+ tristate "Qualcomm 28nm High-Speed PHY"
+ depends on OF && (ARCH_QCOM || COMPILE_TEST)
+ depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in
+ select GENERIC_PHY
+ help
+ Enable this to support the Qualcomm Synopsys DesignWare Core 28nm
+ High-Speed PHY driver. This driver supports the Hi-Speed PHY which
+ is usually paired with either the ChipIdea or Synopsys DWC3 USB
+ IPs on MSM SOCs.
+
+config PHY_QCOM_USB_SS
+ tristate "Qualcomm USB Super-Speed PHY driver"
+ depends on OF && (ARCH_QCOM || COMPILE_TEST)
+ depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in
+ select GENERIC_PHY
+ help
+ Enable this to support the Super-Speed USB transceiver on various
+ Qualcomm chipsets.
+
+config PHY_QCOM_IPQ806X_USB
+ tristate "Qualcomm IPQ806x DWC3 USB PHY driver"
+ depends on HAS_IOMEM
+ depends on OF && (ARCH_QCOM || COMPILE_TEST)
+ select GENERIC_PHY
+ help
+ This option enables support for the Synopsis PHYs present inside the
+ Qualcomm USB3.0 DWC3 controller on ipq806x SoC. This driver supports
+ both HS and SS PHY controllers.
+
+config PHY_QCOM_SGMII_ETH
+ tristate "Qualcomm DWMAC SGMII SerDes/PHY driver"
+ depends on OF && (ARCH_QCOM || COMPILE_TEST)
+ depends on HAS_IOMEM
+ select GENERIC_PHY
+ help
+ Enable this to support the internal SerDes/SGMII PHY on various
+ Qualcomm chipsets.