diff options
Diffstat (limited to 'drivers/phy/qualcomm/phy-qcom-qusb2.c')
| -rw-r--r-- | drivers/phy/qualcomm/phy-qcom-qusb2.c | 1108 |
1 files changed, 1108 insertions, 0 deletions
diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c new file mode 100644 index 0000000000..c52655a383 --- /dev/null +++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c @@ -0,0 +1,1108 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2017, 2019, The Linux Foundation. All rights reserved. + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/mfd/syscon.h> +#include <linux/module.h> +#include <linux/nvmem-consumer.h> +#include <linux/of.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/regulator/consumer.h> +#include <linux/reset.h> +#include <linux/slab.h> + +#include <dt-bindings/phy/phy-qcom-qusb2.h> + +#define QUSB2PHY_PLL 0x0 +#define QUSB2PHY_PLL_TEST 0x04 +#define CLK_REF_SEL BIT(7) + +#define QUSB2PHY_PLL_TUNE 0x08 +#define QUSB2PHY_PLL_USER_CTL1 0x0c +#define QUSB2PHY_PLL_USER_CTL2 0x10 +#define QUSB2PHY_PLL_AUTOPGM_CTL1 0x1c +#define QUSB2PHY_PLL_PWR_CTRL 0x18 + +/* QUSB2PHY_PLL_STATUS register bits */ +#define PLL_LOCKED BIT(5) + +/* QUSB2PHY_PLL_COMMON_STATUS_ONE register bits */ +#define CORE_READY_STATUS BIT(0) + +/* QUSB2PHY_PORT_POWERDOWN register bits */ +#define CLAMP_N_EN BIT(5) +#define FREEZIO_N BIT(1) +#define POWER_DOWN BIT(0) + +/* QUSB2PHY_PWR_CTRL1 register bits */ +#define PWR_CTRL1_VREF_SUPPLY_TRIM BIT(5) +#define PWR_CTRL1_CLAMP_N_EN BIT(1) + +#define QUSB2PHY_REFCLK_ENABLE BIT(0) + +#define PHY_CLK_SCHEME_SEL BIT(0) + +/* QUSB2PHY_INTR_CTRL register bits */ +#define DMSE_INTR_HIGH_SEL BIT(4) +#define DPSE_INTR_HIGH_SEL BIT(3) +#define CHG_DET_INTR_EN BIT(2) +#define DMSE_INTR_EN BIT(1) +#define DPSE_INTR_EN BIT(0) + +/* QUSB2PHY_PLL_CORE_INPUT_OVERRIDE register bits */ +#define CORE_PLL_EN_FROM_RESET BIT(4) +#define CORE_RESET BIT(5) +#define CORE_RESET_MUX BIT(6) + +/* QUSB2PHY_IMP_CTRL1 register bits */ +#define IMP_RES_OFFSET_MASK GENMASK(5, 0) +#define IMP_RES_OFFSET_SHIFT 0x0 + +/* QUSB2PHY_PLL_BIAS_CONTROL_2 register bits */ +#define BIAS_CTRL2_RES_OFFSET_MASK GENMASK(5, 0) +#define BIAS_CTRL2_RES_OFFSET_SHIFT 0x0 + +/* QUSB2PHY_CHG_CONTROL_2 register bits */ +#define CHG_CTRL2_OFFSET_MASK GENMASK(5, 4) +#define CHG_CTRL2_OFFSET_SHIFT 0x4 + +/* QUSB2PHY_PORT_TUNE1 register bits */ +#define HSTX_TRIM_MASK GENMASK(7, 4) +#define HSTX_TRIM_SHIFT 0x4 +#define PREEMPH_WIDTH_HALF_BIT BIT(2) +#define PREEMPHASIS_EN_MASK GENMASK(1, 0) +#define PREEMPHASIS_EN_SHIFT 0x0 + +/* QUSB2PHY_PORT_TUNE2 register bits */ +#define HSDISC_TRIM_MASK GENMASK(1, 0) +#define HSDISC_TRIM_SHIFT 0x0 + +#define QUSB2PHY_PLL_ANALOG_CONTROLS_TWO 0x04 +#define QUSB2PHY_PLL_CLOCK_INVERTERS 0x18c +#define QUSB2PHY_PLL_CMODE 0x2c +#define QUSB2PHY_PLL_LOCK_DELAY 0x184 +#define QUSB2PHY_PLL_DIGITAL_TIMERS_TWO 0xb4 +#define QUSB2PHY_PLL_BIAS_CONTROL_1 0x194 +#define QUSB2PHY_PLL_BIAS_CONTROL_2 0x198 +#define QUSB2PHY_PWR_CTRL2 0x214 +#define QUSB2PHY_IMP_CTRL1 0x220 +#define QUSB2PHY_IMP_CTRL2 0x224 +#define QUSB2PHY_CHG_CTRL2 0x23c + +struct qusb2_phy_init_tbl { + unsigned int offset; + unsigned int val; + /* + * register part of layout ? + * if yes, then offset gives index in the reg-layout + */ + int in_layout; +}; + +#define QUSB2_PHY_INIT_CFG(o, v) \ + { \ + .offset = o, \ + .val = v, \ + } + +#define QUSB2_PHY_INIT_CFG_L(o, v) \ + { \ + .offset = o, \ + .val = v, \ + .in_layout = 1, \ + } + +/* set of registers with offsets different per-PHY */ +enum qusb2phy_reg_layout { + QUSB2PHY_PLL_CORE_INPUT_OVERRIDE, + QUSB2PHY_PLL_STATUS, + QUSB2PHY_PORT_TUNE1, + QUSB2PHY_PORT_TUNE2, + QUSB2PHY_PORT_TUNE3, + QUSB2PHY_PORT_TUNE4, + QUSB2PHY_PORT_TUNE5, + QUSB2PHY_PORT_TEST1, + QUSB2PHY_PORT_TEST2, + QUSB2PHY_PORT_POWERDOWN, + QUSB2PHY_INTR_CTRL, +}; + +static const struct qusb2_phy_init_tbl ipq6018_init_tbl[] = { + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL, 0x14), + QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE1, 0xF8), + QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE2, 0xB3), + QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE3, 0x83), + QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE4, 0xC0), + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_TUNE, 0x30), + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_USER_CTL1, 0x79), + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_USER_CTL2, 0x21), + QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE5, 0x00), + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_PWR_CTRL, 0x00), + QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TEST2, 0x14), + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_TEST, 0x80), + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_AUTOPGM_CTL1, 0x9F), +}; + +static const unsigned int ipq6018_regs_layout[] = { + [QUSB2PHY_PLL_STATUS] = 0x38, + [QUSB2PHY_PORT_TUNE1] = 0x80, + [QUSB2PHY_PORT_TUNE2] = 0x84, + [QUSB2PHY_PORT_TUNE3] = 0x88, + [QUSB2PHY_PORT_TUNE4] = 0x8C, + [QUSB2PHY_PORT_TUNE5] = 0x90, + [QUSB2PHY_PORT_TEST1] = 0x98, + [QUSB2PHY_PORT_TEST2] = 0x9C, + [QUSB2PHY_PORT_POWERDOWN] = 0xB4, + [QUSB2PHY_INTR_CTRL] = 0xBC, +}; + +static const unsigned int msm8996_regs_layout[] = { + [QUSB2PHY_PLL_STATUS] = 0x38, + [QUSB2PHY_PORT_TUNE1] = 0x80, + [QUSB2PHY_PORT_TUNE2] = 0x84, + [QUSB2PHY_PORT_TUNE3] = 0x88, + [QUSB2PHY_PORT_TUNE4] = 0x8c, + [QUSB2PHY_PORT_TUNE5] = 0x90, + [QUSB2PHY_PORT_TEST1] = 0xb8, + [QUSB2PHY_PORT_TEST2] = 0x9c, + [QUSB2PHY_PORT_POWERDOWN] = 0xb4, + [QUSB2PHY_INTR_CTRL] = 0xbc, +}; + +static const struct qusb2_phy_init_tbl msm8996_init_tbl[] = { + QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE1, 0xf8), + QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE2, 0xb3), + QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE3, 0x83), + QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE4, 0xc0), + + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_TUNE, 0x30), + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_USER_CTL1, 0x79), + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_USER_CTL2, 0x21), + + QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TEST2, 0x14), + + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_AUTOPGM_CTL1, 0x9f), + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_PWR_CTRL, 0x00), +}; + +static const unsigned int msm8998_regs_layout[] = { + [QUSB2PHY_PLL_CORE_INPUT_OVERRIDE] = 0xa8, + [QUSB2PHY_PLL_STATUS] = 0x1a0, + [QUSB2PHY_PORT_TUNE1] = 0x23c, + [QUSB2PHY_PORT_TUNE2] = 0x240, + [QUSB2PHY_PORT_TUNE3] = 0x244, + [QUSB2PHY_PORT_TUNE4] = 0x248, + [QUSB2PHY_PORT_TEST1] = 0x24c, + [QUSB2PHY_PORT_TEST2] = 0x250, + [QUSB2PHY_PORT_POWERDOWN] = 0x210, + [QUSB2PHY_INTR_CTRL] = 0x22c, +}; + +static const struct qusb2_phy_init_tbl msm8998_init_tbl[] = { + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_ANALOG_CONTROLS_TWO, 0x13), + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_CLOCK_INVERTERS, 0x7c), + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_CMODE, 0x80), + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_LOCK_DELAY, 0x0a), + + QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE1, 0xa5), + QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE2, 0x09), + + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_DIGITAL_TIMERS_TWO, 0x19), +}; + +static const struct qusb2_phy_init_tbl sm6115_init_tbl[] = { + QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE1, 0xf8), + QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE2, 0x53), + QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE3, 0x81), + QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE4, 0x17), + + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_TUNE, 0x30), + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_USER_CTL1, 0x79), + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_USER_CTL2, 0x21), + + QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TEST2, 0x14), + + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_AUTOPGM_CTL1, 0x9f), + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_PWR_CTRL, 0x00), +}; + +static const unsigned int qusb2_v2_regs_layout[] = { + [QUSB2PHY_PLL_CORE_INPUT_OVERRIDE] = 0xa8, + [QUSB2PHY_PLL_STATUS] = 0x1a0, + [QUSB2PHY_PORT_TUNE1] = 0x240, + [QUSB2PHY_PORT_TUNE2] = 0x244, + [QUSB2PHY_PORT_TUNE3] = 0x248, + [QUSB2PHY_PORT_TUNE4] = 0x24c, + [QUSB2PHY_PORT_TUNE5] = 0x250, + [QUSB2PHY_PORT_TEST1] = 0x254, + [QUSB2PHY_PORT_TEST2] = 0x258, + [QUSB2PHY_PORT_POWERDOWN] = 0x210, + [QUSB2PHY_INTR_CTRL] = 0x230, +}; + +static const struct qusb2_phy_init_tbl qusb2_v2_init_tbl[] = { + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_ANALOG_CONTROLS_TWO, 0x03), + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_CLOCK_INVERTERS, 0x7c), + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_CMODE, 0x80), + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_LOCK_DELAY, 0x0a), + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_DIGITAL_TIMERS_TWO, 0x19), + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_BIAS_CONTROL_1, 0x40), + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_BIAS_CONTROL_2, 0x20), + QUSB2_PHY_INIT_CFG(QUSB2PHY_PWR_CTRL2, 0x21), + QUSB2_PHY_INIT_CFG(QUSB2PHY_IMP_CTRL1, 0x0), + QUSB2_PHY_INIT_CFG(QUSB2PHY_IMP_CTRL2, 0x58), + + QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE1, 0x30), + QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE2, 0x29), + QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE3, 0xca), + QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE4, 0x04), + QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE5, 0x03), + + QUSB2_PHY_INIT_CFG(QUSB2PHY_CHG_CTRL2, 0x0), +}; + +struct qusb2_phy_cfg { + const struct qusb2_phy_init_tbl *tbl; + /* number of entries in the table */ + unsigned int tbl_num; + /* offset to PHY_CLK_SCHEME register in TCSR map */ + unsigned int clk_scheme_offset; + + /* array of registers with different offsets */ + const unsigned int *regs; + unsigned int mask_core_ready; + unsigned int disable_ctrl; + unsigned int autoresume_en; + + /* true if PHY has PLL_TEST register to select clk_scheme */ + bool has_pll_test; + + /* true if TUNE1 register must be updated by fused value, else TUNE2 */ + bool update_tune1_with_efuse; + + /* true if PHY has PLL_CORE_INPUT_OVERRIDE register to reset PLL */ + bool has_pll_override; + + /* true if PHY default clk scheme is single-ended */ + bool se_clk_scheme_default; +}; + +static const struct qusb2_phy_cfg msm8996_phy_cfg = { + .tbl = msm8996_init_tbl, + .tbl_num = ARRAY_SIZE(msm8996_init_tbl), + .regs = msm8996_regs_layout, + + .has_pll_test = true, + .se_clk_scheme_default = true, + .disable_ctrl = (CLAMP_N_EN | FREEZIO_N | POWER_DOWN), + .mask_core_ready = PLL_LOCKED, + .autoresume_en = BIT(3), +}; + +static const struct qusb2_phy_cfg msm8998_phy_cfg = { + .tbl = msm8998_init_tbl, + .tbl_num = ARRAY_SIZE(msm8998_init_tbl), + .regs = msm8998_regs_layout, + + .disable_ctrl = POWER_DOWN, + .mask_core_ready = CORE_READY_STATUS, + .has_pll_override = true, + .se_clk_scheme_default = true, + .autoresume_en = BIT(0), + .update_tune1_with_efuse = true, +}; + +static const struct qusb2_phy_cfg ipq6018_phy_cfg = { + .tbl = ipq6018_init_tbl, + .tbl_num = ARRAY_SIZE(ipq6018_init_tbl), + .regs = ipq6018_regs_layout, + + .disable_ctrl = POWER_DOWN, + .mask_core_ready = PLL_LOCKED, + /* autoresume not used */ + .autoresume_en = BIT(0), +}; + +static const struct qusb2_phy_cfg qusb2_v2_phy_cfg = { + .tbl = qusb2_v2_init_tbl, + .tbl_num = ARRAY_SIZE(qusb2_v2_init_tbl), + .regs = qusb2_v2_regs_layout, + + .disable_ctrl = (PWR_CTRL1_VREF_SUPPLY_TRIM | PWR_CTRL1_CLAMP_N_EN | + POWER_DOWN), + .mask_core_ready = CORE_READY_STATUS, + .has_pll_override = true, + .se_clk_scheme_default = true, + .autoresume_en = BIT(0), + .update_tune1_with_efuse = true, +}; + +static const struct qusb2_phy_cfg sdm660_phy_cfg = { + .tbl = msm8996_init_tbl, + .tbl_num = ARRAY_SIZE(msm8996_init_tbl), + .regs = msm8996_regs_layout, + + .has_pll_test = true, + .se_clk_scheme_default = false, + .disable_ctrl = (CLAMP_N_EN | FREEZIO_N | POWER_DOWN), + .mask_core_ready = PLL_LOCKED, + .autoresume_en = BIT(3), +}; + +static const struct qusb2_phy_cfg sm6115_phy_cfg = { + .tbl = sm6115_init_tbl, + .tbl_num = ARRAY_SIZE(sm6115_init_tbl), + .regs = msm8996_regs_layout, + + .has_pll_test = true, + .se_clk_scheme_default = true, + .disable_ctrl = (CLAMP_N_EN | FREEZIO_N | POWER_DOWN), + .mask_core_ready = PLL_LOCKED, + .autoresume_en = BIT(3), +}; + +static const char * const qusb2_phy_vreg_names[] = { + "vdd", "vdda-pll", "vdda-phy-dpdm", +}; + +#define QUSB2_NUM_VREGS ARRAY_SIZE(qusb2_phy_vreg_names) + +/* struct override_param - structure holding qusb2 v2 phy overriding param + * set override true if the device tree property exists and read and assign + * to value + */ +struct override_param { + bool override; + u8 value; +}; + +/*struct override_params - structure holding qusb2 v2 phy overriding params + * @imp_res_offset: rescode offset to be updated in IMP_CTRL1 register + * @hstx_trim: HSTX_TRIM to be updated in TUNE1 register + * @preemphasis: Amplitude Pre-Emphasis to be updated in TUNE1 register + * @preemphasis_width: half/full-width Pre-Emphasis updated via TUNE1 + * @bias_ctrl: bias ctrl to be updated in BIAS_CONTROL_2 register + * @charge_ctrl: charge ctrl to be updated in CHG_CTRL2 register + * @hsdisc_trim: disconnect threshold to be updated in TUNE2 register + */ +struct override_params { + struct override_param imp_res_offset; + struct override_param hstx_trim; + struct override_param preemphasis; + struct override_param preemphasis_width; + struct override_param bias_ctrl; + struct override_param charge_ctrl; + struct override_param hsdisc_trim; +}; + +/** + * struct qusb2_phy - structure holding qusb2 phy attributes + * + * @phy: generic phy + * @base: iomapped memory space for qubs2 phy + * + * @cfg_ahb_clk: AHB2PHY interface clock + * @ref_clk: phy reference clock + * @iface_clk: phy interface clock + * @phy_reset: phy reset control + * @vregs: regulator supplies bulk data + * + * @tcsr: TCSR syscon register map + * @cell: nvmem cell containing phy tuning value + * + * @overrides: pointer to structure for all overriding tuning params + * + * @cfg: phy config data + * @has_se_clk_scheme: indicate if PHY has single-ended ref clock scheme + * @phy_initialized: indicate if PHY has been initialized + * @mode: current PHY mode + */ +struct qusb2_phy { + struct phy *phy; + void __iomem *base; + + struct clk *cfg_ahb_clk; + struct clk *ref_clk; + struct clk *iface_clk; + struct reset_control *phy_reset; + struct regulator_bulk_data vregs[QUSB2_NUM_VREGS]; + + struct regmap *tcsr; + struct nvmem_cell *cell; + + struct override_params overrides; + + const struct qusb2_phy_cfg *cfg; + bool has_se_clk_scheme; + bool phy_initialized; + enum phy_mode mode; +}; + +static inline void qusb2_write_mask(void __iomem *base, u32 offset, + u32 val, u32 mask) +{ + u32 reg; + + reg = readl(base + offset); + reg &= ~mask; + reg |= val & mask; + writel(reg, base + offset); + + /* Ensure above write is completed */ + readl(base + offset); +} + +static inline void qusb2_setbits(void __iomem *base, u32 offset, u32 val) +{ + u32 reg; + + reg = readl(base + offset); + reg |= val; + writel(reg, base + offset); + + /* Ensure above write is completed */ + readl(base + offset); +} + +static inline void qusb2_clrbits(void __iomem *base, u32 offset, u32 val) +{ + u32 reg; + + reg = readl(base + offset); + reg &= ~val; + writel(reg, base + offset); + + /* Ensure above write is completed */ + readl(base + offset); +} + +static inline +void qcom_qusb2_phy_configure(void __iomem *base, + const unsigned int *regs, + const struct qusb2_phy_init_tbl tbl[], int num) +{ + int i; + + for (i = 0; i < num; i++) { + if (tbl[i].in_layout) + writel(tbl[i].val, base + regs[tbl[i].offset]); + else + writel(tbl[i].val, base + tbl[i].offset); + } +} + +/* + * Update board specific PHY tuning override values if specified from + * device tree. + */ +static void qusb2_phy_override_phy_params(struct qusb2_phy *qphy) +{ + const struct qusb2_phy_cfg *cfg = qphy->cfg; + struct override_params *or = &qphy->overrides; + + if (or->imp_res_offset.override) + qusb2_write_mask(qphy->base, QUSB2PHY_IMP_CTRL1, + or->imp_res_offset.value << IMP_RES_OFFSET_SHIFT, + IMP_RES_OFFSET_MASK); + + if (or->bias_ctrl.override) + qusb2_write_mask(qphy->base, QUSB2PHY_PLL_BIAS_CONTROL_2, + or->bias_ctrl.value << BIAS_CTRL2_RES_OFFSET_SHIFT, + BIAS_CTRL2_RES_OFFSET_MASK); + + if (or->charge_ctrl.override) + qusb2_write_mask(qphy->base, QUSB2PHY_CHG_CTRL2, + or->charge_ctrl.value << CHG_CTRL2_OFFSET_SHIFT, + CHG_CTRL2_OFFSET_MASK); + + if (or->hstx_trim.override) + qusb2_write_mask(qphy->base, cfg->regs[QUSB2PHY_PORT_TUNE1], + or->hstx_trim.value << HSTX_TRIM_SHIFT, + HSTX_TRIM_MASK); + + if (or->preemphasis.override) + qusb2_write_mask(qphy->base, cfg->regs[QUSB2PHY_PORT_TUNE1], + or->preemphasis.value << PREEMPHASIS_EN_SHIFT, + PREEMPHASIS_EN_MASK); + + if (or->preemphasis_width.override) { + if (or->preemphasis_width.value == + QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT) + qusb2_setbits(qphy->base, + cfg->regs[QUSB2PHY_PORT_TUNE1], + PREEMPH_WIDTH_HALF_BIT); + else + qusb2_clrbits(qphy->base, + cfg->regs[QUSB2PHY_PORT_TUNE1], + PREEMPH_WIDTH_HALF_BIT); + } + + if (or->hsdisc_trim.override) + qusb2_write_mask(qphy->base, cfg->regs[QUSB2PHY_PORT_TUNE2], + or->hsdisc_trim.value << HSDISC_TRIM_SHIFT, + HSDISC_TRIM_MASK); +} + +/* + * Fetches HS Tx tuning value from nvmem and sets the + * QUSB2PHY_PORT_TUNE1/2 register. + * For error case, skip setting the value and use the default value. + */ +static void qusb2_phy_set_tune2_param(struct qusb2_phy *qphy) +{ + struct device *dev = &qphy->phy->dev; + const struct qusb2_phy_cfg *cfg = qphy->cfg; + u8 *val, hstx_trim; + + /* efuse register is optional */ + if (!qphy->cell) + return; + + /* + * Read efuse register having TUNE2/1 parameter's high nibble. + * If efuse register shows value as 0x0 (indicating value is not + * fused), or if we fail to find a valid efuse register setting, + * then use default value for high nibble that we have already + * set while configuring the phy. + */ + val = nvmem_cell_read(qphy->cell, NULL); + if (IS_ERR(val)) { + dev_dbg(dev, "failed to read a valid hs-tx trim value\n"); + return; + } + hstx_trim = val[0]; + kfree(val); + if (!hstx_trim) { + dev_dbg(dev, "failed to read a valid hs-tx trim value\n"); + return; + } + + /* Fused TUNE1/2 value is the higher nibble only */ + if (cfg->update_tune1_with_efuse) + qusb2_write_mask(qphy->base, cfg->regs[QUSB2PHY_PORT_TUNE1], + hstx_trim << HSTX_TRIM_SHIFT, HSTX_TRIM_MASK); + else + qusb2_write_mask(qphy->base, cfg->regs[QUSB2PHY_PORT_TUNE2], + hstx_trim << HSTX_TRIM_SHIFT, HSTX_TRIM_MASK); +} + +static int qusb2_phy_set_mode(struct phy *phy, + enum phy_mode mode, int submode) +{ + struct qusb2_phy *qphy = phy_get_drvdata(phy); + + qphy->mode = mode; + + return 0; +} + +static int __maybe_unused qusb2_phy_runtime_suspend(struct device *dev) +{ + struct qusb2_phy *qphy = dev_get_drvdata(dev); + const struct qusb2_phy_cfg *cfg = qphy->cfg; + u32 intr_mask; + + dev_vdbg(dev, "Suspending QUSB2 Phy, mode:%d\n", qphy->mode); + + if (!qphy->phy_initialized) { + dev_vdbg(dev, "PHY not initialized, bailing out\n"); + return 0; + } + + /* + * Enable DP/DM interrupts to detect line state changes based on current + * speed. In other words, enable the triggers _opposite_ of what the + * current D+/D- levels are e.g. if currently D+ high, D- low + * (HS 'J'/Suspend), configure the mask to trigger on D+ low OR D- high + */ + intr_mask = DPSE_INTR_EN | DMSE_INTR_EN; + switch (qphy->mode) { + case PHY_MODE_USB_HOST_HS: + case PHY_MODE_USB_HOST_FS: + case PHY_MODE_USB_DEVICE_HS: + case PHY_MODE_USB_DEVICE_FS: + intr_mask |= DMSE_INTR_HIGH_SEL; + break; + case PHY_MODE_USB_HOST_LS: + case PHY_MODE_USB_DEVICE_LS: + intr_mask |= DPSE_INTR_HIGH_SEL; + break; + default: + /* No device connected, enable both DP/DM high interrupt */ + intr_mask |= DMSE_INTR_HIGH_SEL; + intr_mask |= DPSE_INTR_HIGH_SEL; + break; + } + + writel(intr_mask, qphy->base + cfg->regs[QUSB2PHY_INTR_CTRL]); + + /* hold core PLL into reset */ + if (cfg->has_pll_override) { + qusb2_setbits(qphy->base, + cfg->regs[QUSB2PHY_PLL_CORE_INPUT_OVERRIDE], + CORE_PLL_EN_FROM_RESET | CORE_RESET | + CORE_RESET_MUX); + } + + /* enable phy auto-resume only if device is connected on bus */ + if (qphy->mode != PHY_MODE_INVALID) { + qusb2_setbits(qphy->base, cfg->regs[QUSB2PHY_PORT_TEST1], + cfg->autoresume_en); + /* Autoresume bit has to be toggled in order to enable it */ + qusb2_clrbits(qphy->base, cfg->regs[QUSB2PHY_PORT_TEST1], + cfg->autoresume_en); + } + + if (!qphy->has_se_clk_scheme) + clk_disable_unprepare(qphy->ref_clk); + + clk_disable_unprepare(qphy->cfg_ahb_clk); + clk_disable_unprepare(qphy->iface_clk); + + return 0; +} + +static int __maybe_unused qusb2_phy_runtime_resume(struct device *dev) +{ + struct qusb2_phy *qphy = dev_get_drvdata(dev); + const struct qusb2_phy_cfg *cfg = qphy->cfg; + int ret; + + dev_vdbg(dev, "Resuming QUSB2 phy, mode:%d\n", qphy->mode); + + if (!qphy->phy_initialized) { + dev_vdbg(dev, "PHY not initialized, bailing out\n"); + return 0; + } + + ret = clk_prepare_enable(qphy->iface_clk); + if (ret) { + dev_err(dev, "failed to enable iface_clk, %d\n", ret); + return ret; + } + + ret = clk_prepare_enable(qphy->cfg_ahb_clk); + if (ret) { + dev_err(dev, "failed to enable cfg ahb clock, %d\n", ret); + goto disable_iface_clk; + } + + if (!qphy->has_se_clk_scheme) { + ret = clk_prepare_enable(qphy->ref_clk); + if (ret) { + dev_err(dev, "failed to enable ref clk, %d\n", ret); + goto disable_ahb_clk; + } + } + + writel(0x0, qphy->base + cfg->regs[QUSB2PHY_INTR_CTRL]); + + /* bring core PLL out of reset */ + if (cfg->has_pll_override) { + qusb2_clrbits(qphy->base, + cfg->regs[QUSB2PHY_PLL_CORE_INPUT_OVERRIDE], + CORE_RESET | CORE_RESET_MUX); + } + + return 0; + +disable_ahb_clk: + clk_disable_unprepare(qphy->cfg_ahb_clk); +disable_iface_clk: + clk_disable_unprepare(qphy->iface_clk); + + return ret; +} + +static int qusb2_phy_init(struct phy *phy) +{ + struct qusb2_phy *qphy = phy_get_drvdata(phy); + const struct qusb2_phy_cfg *cfg = qphy->cfg; + unsigned int val = 0; + unsigned int clk_scheme; + int ret; + + dev_vdbg(&phy->dev, "%s(): Initializing QUSB2 phy\n", __func__); + + /* turn on regulator supplies */ + ret = regulator_bulk_enable(ARRAY_SIZE(qphy->vregs), qphy->vregs); + if (ret) + return ret; + + ret = clk_prepare_enable(qphy->iface_clk); + if (ret) { + dev_err(&phy->dev, "failed to enable iface_clk, %d\n", ret); + goto poweroff_phy; + } + + /* enable ahb interface clock to program phy */ + ret = clk_prepare_enable(qphy->cfg_ahb_clk); + if (ret) { + dev_err(&phy->dev, "failed to enable cfg ahb clock, %d\n", ret); + goto disable_iface_clk; + } + + /* Perform phy reset */ + ret = reset_control_assert(qphy->phy_reset); + if (ret) { + dev_err(&phy->dev, "failed to assert phy_reset, %d\n", ret); + goto disable_ahb_clk; + } + + /* 100 us delay to keep PHY in reset mode */ + usleep_range(100, 150); + + ret = reset_control_deassert(qphy->phy_reset); + if (ret) { + dev_err(&phy->dev, "failed to de-assert phy_reset, %d\n", ret); + goto disable_ahb_clk; + } + + /* Disable the PHY */ + qusb2_setbits(qphy->base, cfg->regs[QUSB2PHY_PORT_POWERDOWN], + qphy->cfg->disable_ctrl); + + if (cfg->has_pll_test) { + /* save reset value to override reference clock scheme later */ + val = readl(qphy->base + QUSB2PHY_PLL_TEST); + } + + qcom_qusb2_phy_configure(qphy->base, cfg->regs, cfg->tbl, + cfg->tbl_num); + + /* Override board specific PHY tuning values */ + qusb2_phy_override_phy_params(qphy); + + /* Set efuse value for tuning the PHY */ + qusb2_phy_set_tune2_param(qphy); + + /* Enable the PHY */ + qusb2_clrbits(qphy->base, cfg->regs[QUSB2PHY_PORT_POWERDOWN], + POWER_DOWN); + + /* Required to get phy pll lock successfully */ + usleep_range(150, 160); + + /* + * Not all the SoCs have got a readable TCSR_PHY_CLK_SCHEME + * register in the TCSR so, if there's none, use the default + * value hardcoded in the configuration. + */ + qphy->has_se_clk_scheme = cfg->se_clk_scheme_default; + + /* + * read TCSR_PHY_CLK_SCHEME register to check if single-ended + * clock scheme is selected. If yes, then disable differential + * ref_clk and use single-ended clock, otherwise use differential + * ref_clk only. + */ + if (qphy->tcsr) { + ret = regmap_read(qphy->tcsr, qphy->cfg->clk_scheme_offset, + &clk_scheme); + if (ret) { + dev_err(&phy->dev, "failed to read clk scheme reg\n"); + goto assert_phy_reset; + } + + /* is it a differential clock scheme ? */ + if (!(clk_scheme & PHY_CLK_SCHEME_SEL)) { + dev_vdbg(&phy->dev, "%s(): select differential clk\n", + __func__); + qphy->has_se_clk_scheme = false; + } else { + dev_vdbg(&phy->dev, "%s(): select single-ended clk\n", + __func__); + } + } + + if (!qphy->has_se_clk_scheme) { + ret = clk_prepare_enable(qphy->ref_clk); + if (ret) { + dev_err(&phy->dev, "failed to enable ref clk, %d\n", + ret); + goto assert_phy_reset; + } + } + + if (cfg->has_pll_test) { + if (!qphy->has_se_clk_scheme) + val &= ~CLK_REF_SEL; + else + val |= CLK_REF_SEL; + + writel(val, qphy->base + QUSB2PHY_PLL_TEST); + + /* ensure above write is through */ + readl(qphy->base + QUSB2PHY_PLL_TEST); + } + + /* Required to get phy pll lock successfully */ + usleep_range(100, 110); + + val = readb(qphy->base + cfg->regs[QUSB2PHY_PLL_STATUS]); + if (!(val & cfg->mask_core_ready)) { + dev_err(&phy->dev, + "QUSB2PHY pll lock failed: status reg = %x\n", val); + ret = -EBUSY; + goto disable_ref_clk; + } + qphy->phy_initialized = true; + + return 0; + +disable_ref_clk: + if (!qphy->has_se_clk_scheme) + clk_disable_unprepare(qphy->ref_clk); +assert_phy_reset: + reset_control_assert(qphy->phy_reset); +disable_ahb_clk: + clk_disable_unprepare(qphy->cfg_ahb_clk); +disable_iface_clk: + clk_disable_unprepare(qphy->iface_clk); +poweroff_phy: + regulator_bulk_disable(ARRAY_SIZE(qphy->vregs), qphy->vregs); + + return ret; +} + +static int qusb2_phy_exit(struct phy *phy) +{ + struct qusb2_phy *qphy = phy_get_drvdata(phy); + + /* Disable the PHY */ + qusb2_setbits(qphy->base, qphy->cfg->regs[QUSB2PHY_PORT_POWERDOWN], + qphy->cfg->disable_ctrl); + + if (!qphy->has_se_clk_scheme) + clk_disable_unprepare(qphy->ref_clk); + + reset_control_assert(qphy->phy_reset); + + clk_disable_unprepare(qphy->cfg_ahb_clk); + clk_disable_unprepare(qphy->iface_clk); + + regulator_bulk_disable(ARRAY_SIZE(qphy->vregs), qphy->vregs); + + qphy->phy_initialized = false; + + return 0; +} + +static const struct phy_ops qusb2_phy_gen_ops = { + .init = qusb2_phy_init, + .exit = qusb2_phy_exit, + .set_mode = qusb2_phy_set_mode, + .owner = THIS_MODULE, +}; + +static const struct of_device_id qusb2_phy_of_match_table[] = { + { + .compatible = "qcom,ipq6018-qusb2-phy", + .data = &ipq6018_phy_cfg, + }, { + .compatible = "qcom,ipq8074-qusb2-phy", + .data = &msm8996_phy_cfg, + }, { + .compatible = "qcom,ipq9574-qusb2-phy", + .data = &ipq6018_phy_cfg, + }, { + .compatible = "qcom,msm8953-qusb2-phy", + .data = &msm8996_phy_cfg, + }, { + .compatible = "qcom,msm8996-qusb2-phy", + .data = &msm8996_phy_cfg, + }, { + .compatible = "qcom,msm8998-qusb2-phy", + .data = &msm8998_phy_cfg, + }, { + .compatible = "qcom,qcm2290-qusb2-phy", + .data = &sm6115_phy_cfg, + }, { + .compatible = "qcom,sdm660-qusb2-phy", + .data = &sdm660_phy_cfg, + }, { + .compatible = "qcom,sm4250-qusb2-phy", + .data = &sm6115_phy_cfg, + }, { + .compatible = "qcom,sm6115-qusb2-phy", + .data = &sm6115_phy_cfg, + }, { + /* + * Deprecated. Only here to support legacy device + * trees that didn't include "qcom,qusb2-v2-phy" + */ + .compatible = "qcom,sdm845-qusb2-phy", + .data = &qusb2_v2_phy_cfg, + }, { + .compatible = "qcom,qusb2-v2-phy", + .data = &qusb2_v2_phy_cfg, + }, + { }, +}; +MODULE_DEVICE_TABLE(of, qusb2_phy_of_match_table); + +static const struct dev_pm_ops qusb2_phy_pm_ops = { + SET_RUNTIME_PM_OPS(qusb2_phy_runtime_suspend, + qusb2_phy_runtime_resume, NULL) +}; + +static int qusb2_phy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct qusb2_phy *qphy; + struct phy_provider *phy_provider; + struct phy *generic_phy; + int ret, i; + int num; + u32 value; + struct override_params *or; + + qphy = devm_kzalloc(dev, sizeof(*qphy), GFP_KERNEL); + if (!qphy) + return -ENOMEM; + or = &qphy->overrides; + + qphy->base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(qphy->base)) + return PTR_ERR(qphy->base); + + qphy->cfg_ahb_clk = devm_clk_get(dev, "cfg_ahb"); + if (IS_ERR(qphy->cfg_ahb_clk)) + return dev_err_probe(dev, PTR_ERR(qphy->cfg_ahb_clk), + "failed to get cfg ahb clk\n"); + + qphy->ref_clk = devm_clk_get(dev, "ref"); + if (IS_ERR(qphy->ref_clk)) + return dev_err_probe(dev, PTR_ERR(qphy->ref_clk), + "failed to get ref clk\n"); + + qphy->iface_clk = devm_clk_get_optional(dev, "iface"); + if (IS_ERR(qphy->iface_clk)) + return PTR_ERR(qphy->iface_clk); + + qphy->phy_reset = devm_reset_control_get_by_index(&pdev->dev, 0); + if (IS_ERR(qphy->phy_reset)) { + dev_err(dev, "failed to get phy core reset\n"); + return PTR_ERR(qphy->phy_reset); + } + + num = ARRAY_SIZE(qphy->vregs); + for (i = 0; i < num; i++) + qphy->vregs[i].supply = qusb2_phy_vreg_names[i]; + + ret = devm_regulator_bulk_get(dev, num, qphy->vregs); + if (ret) + return dev_err_probe(dev, ret, + "failed to get regulator supplies\n"); + + /* Get the specific init parameters of QMP phy */ + qphy->cfg = of_device_get_match_data(dev); + + qphy->tcsr = syscon_regmap_lookup_by_phandle(dev->of_node, + "qcom,tcsr-syscon"); + if (IS_ERR(qphy->tcsr)) { + dev_dbg(dev, "failed to lookup TCSR regmap\n"); + qphy->tcsr = NULL; + } + + qphy->cell = devm_nvmem_cell_get(dev, NULL); + if (IS_ERR(qphy->cell)) { + if (PTR_ERR(qphy->cell) == -EPROBE_DEFER) + return -EPROBE_DEFER; + qphy->cell = NULL; + dev_dbg(dev, "failed to lookup tune2 hstx trim value\n"); + } + + if (!of_property_read_u32(dev->of_node, "qcom,imp-res-offset-value", + &value)) { + or->imp_res_offset.value = (u8)value; + or->imp_res_offset.override = true; + } + + if (!of_property_read_u32(dev->of_node, "qcom,bias-ctrl-value", + &value)) { + or->bias_ctrl.value = (u8)value; + or->bias_ctrl.override = true; + } + + if (!of_property_read_u32(dev->of_node, "qcom,charge-ctrl-value", + &value)) { + or->charge_ctrl.value = (u8)value; + or->charge_ctrl.override = true; + } + + if (!of_property_read_u32(dev->of_node, "qcom,hstx-trim-value", + &value)) { + or->hstx_trim.value = (u8)value; + or->hstx_trim.override = true; + } + + if (!of_property_read_u32(dev->of_node, "qcom,preemphasis-level", + &value)) { + or->preemphasis.value = (u8)value; + or->preemphasis.override = true; + } + + if (!of_property_read_u32(dev->of_node, "qcom,preemphasis-width", + &value)) { + or->preemphasis_width.value = (u8)value; + or->preemphasis_width.override = true; + } + + if (!of_property_read_u32(dev->of_node, "qcom,hsdisc-trim-value", + &value)) { + or->hsdisc_trim.value = (u8)value; + or->hsdisc_trim.override = true; + } + + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + /* + * Prevent runtime pm from being ON by default. Users can enable + * it using power/control in sysfs. + */ + pm_runtime_forbid(dev); + + generic_phy = devm_phy_create(dev, NULL, &qusb2_phy_gen_ops); + if (IS_ERR(generic_phy)) { + ret = PTR_ERR(generic_phy); + dev_err(dev, "failed to create phy, %d\n", ret); + pm_runtime_disable(dev); + return ret; + } + qphy->phy = generic_phy; + + dev_set_drvdata(dev, qphy); + phy_set_drvdata(generic_phy, qphy); + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + if (!IS_ERR(phy_provider)) + dev_info(dev, "Registered Qcom-QUSB2 phy\n"); + else + pm_runtime_disable(dev); + + return PTR_ERR_OR_ZERO(phy_provider); +} + +static struct platform_driver qusb2_phy_driver = { + .probe = qusb2_phy_probe, + .driver = { + .name = "qcom-qusb2-phy", + .pm = &qusb2_phy_pm_ops, + .of_match_table = qusb2_phy_of_match_table, + }, +}; + +module_platform_driver(qusb2_phy_driver); + +MODULE_AUTHOR("Vivek Gautam <vivek.gautam@codeaurora.org>"); +MODULE_DESCRIPTION("Qualcomm QUSB2 PHY driver"); +MODULE_LICENSE("GPL v2"); |