summaryrefslogtreecommitdiffstats
path: root/drivers/phy/rockchip
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/phy/rockchip')
-rw-r--r--drivers/phy/rockchip/Kconfig109
-rw-r--r--drivers/phy/rockchip/Makefile13
-rw-r--r--drivers/phy/rockchip/phy-rockchip-dp.c151
-rw-r--r--drivers/phy/rockchip/phy-rockchip-dphy-rx0.c383
-rw-r--r--drivers/phy/rockchip/phy-rockchip-emmc.c426
-rw-r--r--drivers/phy/rockchip/phy-rockchip-inno-csidphy.c481
-rw-r--r--drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c793
-rw-r--r--drivers/phy/rockchip/phy-rockchip-inno-hdmi.c1438
-rw-r--r--drivers/phy/rockchip/phy-rockchip-inno-usb2.c2018
-rw-r--r--drivers/phy/rockchip/phy-rockchip-naneng-combphy.c766
-rw-r--r--drivers/phy/rockchip/phy-rockchip-pcie.c426
-rw-r--r--drivers/phy/rockchip/phy-rockchip-snps-pcie3.c323
-rw-r--r--drivers/phy/rockchip/phy-rockchip-typec.c1225
-rw-r--r--drivers/phy/rockchip/phy-rockchip-usb.c581
14 files changed, 9133 insertions, 0 deletions
diff --git a/drivers/phy/rockchip/Kconfig b/drivers/phy/rockchip/Kconfig
new file mode 100644
index 0000000000..94360fc96a
--- /dev/null
+++ b/drivers/phy/rockchip/Kconfig
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Phy drivers for Rockchip platforms
+#
+config PHY_ROCKCHIP_DP
+ tristate "Rockchip Display Port PHY Driver"
+ depends on ARCH_ROCKCHIP && OF
+ select GENERIC_PHY
+ help
+ Enable this to support the Rockchip Display Port PHY.
+
+config PHY_ROCKCHIP_DPHY_RX0
+ tristate "Rockchip MIPI Synopsys DPHY RX0 driver"
+ depends on ARCH_ROCKCHIP || COMPILE_TEST
+ select GENERIC_PHY_MIPI_DPHY
+ select GENERIC_PHY
+ help
+ Enable this to support the Rockchip MIPI Synopsys DPHY RX0
+ associated to the Rockchip ISP module present in RK3399 SoCs.
+
+ To compile this driver as a module, choose M here: the module
+ will be called phy-rockchip-dphy-rx0.
+
+config PHY_ROCKCHIP_EMMC
+ tristate "Rockchip EMMC PHY Driver"
+ depends on ARCH_ROCKCHIP && OF
+ select GENERIC_PHY
+ help
+ Enable this to support the Rockchip EMMC PHY.
+
+config PHY_ROCKCHIP_INNO_HDMI
+ tristate "Rockchip INNO HDMI PHY Driver"
+ depends on (ARCH_ROCKCHIP || COMPILE_TEST) && OF
+ depends on COMMON_CLK
+ depends on HAS_IOMEM
+ select GENERIC_PHY
+ help
+ Enable this to support the Rockchip Innosilicon HDMI PHY.
+
+config PHY_ROCKCHIP_INNO_USB2
+ tristate "Rockchip INNO USB2PHY Driver"
+ depends on (ARCH_ROCKCHIP || COMPILE_TEST) && OF
+ depends on COMMON_CLK
+ depends on EXTCON
+ depends on USB_SUPPORT
+ select GENERIC_PHY
+ select USB_COMMON
+ help
+ Support for Rockchip USB2.0 PHY with Innosilicon IP block.
+
+config PHY_ROCKCHIP_INNO_CSIDPHY
+ tristate "Rockchip Innosilicon MIPI CSI PHY driver"
+ depends on (ARCH_ROCKCHIP || COMPILE_TEST) && OF
+ select GENERIC_PHY
+ select GENERIC_PHY_MIPI_DPHY
+ help
+ Enable this to support the Rockchip MIPI CSI PHY with
+ Innosilicon IP block.
+
+config PHY_ROCKCHIP_INNO_DSIDPHY
+ tristate "Rockchip Innosilicon MIPI/LVDS/TTL PHY driver"
+ depends on (ARCH_ROCKCHIP || COMPILE_TEST) && OF
+ select GENERIC_PHY
+ select GENERIC_PHY_MIPI_DPHY
+ help
+ Enable this to support the Rockchip MIPI/LVDS/TTL PHY with
+ Innosilicon IP block.
+
+config PHY_ROCKCHIP_NANENG_COMBO_PHY
+ tristate "Rockchip NANENG COMBO PHY Driver"
+ depends on ARCH_ROCKCHIP && OF
+ select GENERIC_PHY
+ help
+ Enable this to support the Rockchip PCIe/USB3.0/SATA/QSGMII
+ combo PHY with NaNeng IP block.
+
+config PHY_ROCKCHIP_PCIE
+ tristate "Rockchip PCIe PHY Driver"
+ depends on (ARCH_ROCKCHIP && OF) || COMPILE_TEST
+ depends on HAS_IOMEM
+ select GENERIC_PHY
+ select MFD_SYSCON
+ help
+ Enable this to support the Rockchip PCIe PHY.
+
+config PHY_ROCKCHIP_SNPS_PCIE3
+ tristate "Rockchip Snps PCIe3 PHY Driver"
+ depends on (ARCH_ROCKCHIP && OF) || COMPILE_TEST
+ depends on HAS_IOMEM
+ select GENERIC_PHY
+ select MFD_SYSCON
+ help
+ Enable this to support the Rockchip snps PCIe3 PHY.
+
+config PHY_ROCKCHIP_TYPEC
+ tristate "Rockchip TYPEC PHY Driver"
+ depends on OF && (ARCH_ROCKCHIP || COMPILE_TEST)
+ select EXTCON
+ select GENERIC_PHY
+ select RESET_CONTROLLER
+ help
+ Enable this to support the Rockchip USB TYPEC PHY.
+
+config PHY_ROCKCHIP_USB
+ tristate "Rockchip USB2 PHY Driver"
+ depends on ARCH_ROCKCHIP && OF
+ select GENERIC_PHY
+ help
+ Enable this to support the Rockchip USB 2.0 PHY.
diff --git a/drivers/phy/rockchip/Makefile b/drivers/phy/rockchip/Makefile
new file mode 100644
index 0000000000..7eab129230
--- /dev/null
+++ b/drivers/phy/rockchip/Makefile
@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_PHY_ROCKCHIP_DP) += phy-rockchip-dp.o
+obj-$(CONFIG_PHY_ROCKCHIP_DPHY_RX0) += phy-rockchip-dphy-rx0.o
+obj-$(CONFIG_PHY_ROCKCHIP_EMMC) += phy-rockchip-emmc.o
+obj-$(CONFIG_PHY_ROCKCHIP_INNO_CSIDPHY) += phy-rockchip-inno-csidphy.o
+obj-$(CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY) += phy-rockchip-inno-dsidphy.o
+obj-$(CONFIG_PHY_ROCKCHIP_INNO_HDMI) += phy-rockchip-inno-hdmi.o
+obj-$(CONFIG_PHY_ROCKCHIP_INNO_USB2) += phy-rockchip-inno-usb2.o
+obj-$(CONFIG_PHY_ROCKCHIP_NANENG_COMBO_PHY) += phy-rockchip-naneng-combphy.o
+obj-$(CONFIG_PHY_ROCKCHIP_PCIE) += phy-rockchip-pcie.o
+obj-$(CONFIG_PHY_ROCKCHIP_SNPS_PCIE3) += phy-rockchip-snps-pcie3.o
+obj-$(CONFIG_PHY_ROCKCHIP_TYPEC) += phy-rockchip-typec.o
+obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o
diff --git a/drivers/phy/rockchip/phy-rockchip-dp.c b/drivers/phy/rockchip/phy-rockchip-dp.c
new file mode 100644
index 0000000000..592aa956ee
--- /dev/null
+++ b/drivers/phy/rockchip/phy-rockchip-dp.c
@@ -0,0 +1,151 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Rockchip DP PHY driver
+ *
+ * Copyright (C) 2016 FuZhou Rockchip Co., Ltd.
+ * Author: Yakir Yang <ykk@@rock-chips.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define GRF_SOC_CON12 0x0274
+
+#define GRF_EDP_REF_CLK_SEL_INTER_HIWORD_MASK BIT(20)
+#define GRF_EDP_REF_CLK_SEL_INTER BIT(4)
+
+#define GRF_EDP_PHY_SIDDQ_HIWORD_MASK BIT(21)
+#define GRF_EDP_PHY_SIDDQ_ON 0
+#define GRF_EDP_PHY_SIDDQ_OFF BIT(5)
+
+struct rockchip_dp_phy {
+ struct device *dev;
+ struct regmap *grf;
+ struct clk *phy_24m;
+};
+
+static int rockchip_set_phy_state(struct phy *phy, bool enable)
+{
+ struct rockchip_dp_phy *dp = phy_get_drvdata(phy);
+ int ret;
+
+ if (enable) {
+ ret = regmap_write(dp->grf, GRF_SOC_CON12,
+ GRF_EDP_PHY_SIDDQ_HIWORD_MASK |
+ GRF_EDP_PHY_SIDDQ_ON);
+ if (ret < 0) {
+ dev_err(dp->dev, "Can't enable PHY power %d\n", ret);
+ return ret;
+ }
+
+ ret = clk_prepare_enable(dp->phy_24m);
+ } else {
+ clk_disable_unprepare(dp->phy_24m);
+
+ ret = regmap_write(dp->grf, GRF_SOC_CON12,
+ GRF_EDP_PHY_SIDDQ_HIWORD_MASK |
+ GRF_EDP_PHY_SIDDQ_OFF);
+ }
+
+ return ret;
+}
+
+static int rockchip_dp_phy_power_on(struct phy *phy)
+{
+ return rockchip_set_phy_state(phy, true);
+}
+
+static int rockchip_dp_phy_power_off(struct phy *phy)
+{
+ return rockchip_set_phy_state(phy, false);
+}
+
+static const struct phy_ops rockchip_dp_phy_ops = {
+ .power_on = rockchip_dp_phy_power_on,
+ .power_off = rockchip_dp_phy_power_off,
+ .owner = THIS_MODULE,
+};
+
+static int rockchip_dp_phy_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ struct phy_provider *phy_provider;
+ struct rockchip_dp_phy *dp;
+ struct phy *phy;
+ int ret;
+
+ if (!np)
+ return -ENODEV;
+
+ if (!dev->parent || !dev->parent->of_node)
+ return -ENODEV;
+
+ dp = devm_kzalloc(dev, sizeof(*dp), GFP_KERNEL);
+ if (!dp)
+ return -ENOMEM;
+
+ dp->dev = dev;
+
+ dp->phy_24m = devm_clk_get(dev, "24m");
+ if (IS_ERR(dp->phy_24m)) {
+ dev_err(dev, "cannot get clock 24m\n");
+ return PTR_ERR(dp->phy_24m);
+ }
+
+ ret = clk_set_rate(dp->phy_24m, 24000000);
+ if (ret < 0) {
+ dev_err(dp->dev, "cannot set clock phy_24m %d\n", ret);
+ return ret;
+ }
+
+ dp->grf = syscon_node_to_regmap(dev->parent->of_node);
+ if (IS_ERR(dp->grf)) {
+ dev_err(dev, "rk3288-dp needs the General Register Files syscon\n");
+ return PTR_ERR(dp->grf);
+ }
+
+ ret = regmap_write(dp->grf, GRF_SOC_CON12, GRF_EDP_REF_CLK_SEL_INTER |
+ GRF_EDP_REF_CLK_SEL_INTER_HIWORD_MASK);
+ if (ret != 0) {
+ dev_err(dp->dev, "Could not config GRF edp ref clk: %d\n", ret);
+ return ret;
+ }
+
+ phy = devm_phy_create(dev, np, &rockchip_dp_phy_ops);
+ if (IS_ERR(phy)) {
+ dev_err(dev, "failed to create phy\n");
+ return PTR_ERR(phy);
+ }
+ phy_set_drvdata(phy, dp);
+
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+ return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id rockchip_dp_phy_dt_ids[] = {
+ { .compatible = "rockchip,rk3288-dp-phy" },
+ {}
+};
+
+MODULE_DEVICE_TABLE(of, rockchip_dp_phy_dt_ids);
+
+static struct platform_driver rockchip_dp_phy_driver = {
+ .probe = rockchip_dp_phy_probe,
+ .driver = {
+ .name = "rockchip-dp-phy",
+ .of_match_table = rockchip_dp_phy_dt_ids,
+ },
+};
+
+module_platform_driver(rockchip_dp_phy_driver);
+
+MODULE_AUTHOR("Yakir Yang <ykk@rock-chips.com>");
+MODULE_DESCRIPTION("Rockchip DP PHY driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/rockchip/phy-rockchip-dphy-rx0.c b/drivers/phy/rockchip/phy-rockchip-dphy-rx0.c
new file mode 100644
index 0000000000..e6a768bbb9
--- /dev/null
+++ b/drivers/phy/rockchip/phy-rockchip-dphy-rx0.c
@@ -0,0 +1,383 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Rockchip MIPI Synopsys DPHY RX0 driver
+ *
+ * Copyright (C) 2019 Collabora, Ltd.
+ *
+ * Based on:
+ *
+ * drivers/media/platform/rockchip/isp1/mipi_dphy_sy.c
+ * in https://chromium.googlesource.com/chromiumos/third_party/kernel,
+ * chromeos-4.4 branch.
+ *
+ * Copyright (C) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ * Jacob Chen <jacob2.chen@rock-chips.com>
+ * Shunqian Zheng <zhengsq@rock-chips.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/phy/phy-mipi-dphy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define RK3399_GRF_SOC_CON9 0x6224
+#define RK3399_GRF_SOC_CON21 0x6254
+#define RK3399_GRF_SOC_CON22 0x6258
+#define RK3399_GRF_SOC_CON23 0x625c
+#define RK3399_GRF_SOC_CON24 0x6260
+#define RK3399_GRF_SOC_CON25 0x6264
+#define RK3399_GRF_SOC_STATUS1 0xe2a4
+
+#define CLOCK_LANE_HS_RX_CONTROL 0x34
+#define LANE0_HS_RX_CONTROL 0x44
+#define LANE1_HS_RX_CONTROL 0x54
+#define LANE2_HS_RX_CONTROL 0x84
+#define LANE3_HS_RX_CONTROL 0x94
+#define LANES_THS_SETTLE_CONTROL 0x75
+#define THS_SETTLE_COUNTER_THRESHOLD 0x04
+
+struct hsfreq_range {
+ u16 range_h;
+ u8 cfg_bit;
+};
+
+static const struct hsfreq_range rk3399_mipidphy_hsfreq_ranges[] = {
+ { 89, 0x00 }, { 99, 0x10 }, { 109, 0x20 }, { 129, 0x01 },
+ { 139, 0x11 }, { 149, 0x21 }, { 169, 0x02 }, { 179, 0x12 },
+ { 199, 0x22 }, { 219, 0x03 }, { 239, 0x13 }, { 249, 0x23 },
+ { 269, 0x04 }, { 299, 0x14 }, { 329, 0x05 }, { 359, 0x15 },
+ { 399, 0x25 }, { 449, 0x06 }, { 499, 0x16 }, { 549, 0x07 },
+ { 599, 0x17 }, { 649, 0x08 }, { 699, 0x18 }, { 749, 0x09 },
+ { 799, 0x19 }, { 849, 0x29 }, { 899, 0x39 }, { 949, 0x0a },
+ { 999, 0x1a }, { 1049, 0x2a }, { 1099, 0x3a }, { 1149, 0x0b },
+ { 1199, 0x1b }, { 1249, 0x2b }, { 1299, 0x3b }, { 1349, 0x0c },
+ { 1399, 0x1c }, { 1449, 0x2c }, { 1500, 0x3c }
+};
+
+static const char * const rk3399_mipidphy_clks[] = {
+ "dphy-ref",
+ "dphy-cfg",
+ "grf",
+};
+
+enum dphy_reg_id {
+ GRF_DPHY_RX0_TURNDISABLE = 0,
+ GRF_DPHY_RX0_FORCERXMODE,
+ GRF_DPHY_RX0_FORCETXSTOPMODE,
+ GRF_DPHY_RX0_ENABLE,
+ GRF_DPHY_RX0_TESTCLR,
+ GRF_DPHY_RX0_TESTCLK,
+ GRF_DPHY_RX0_TESTEN,
+ GRF_DPHY_RX0_TESTDIN,
+ GRF_DPHY_RX0_TURNREQUEST,
+ GRF_DPHY_RX0_TESTDOUT,
+ GRF_DPHY_TX0_TURNDISABLE,
+ GRF_DPHY_TX0_FORCERXMODE,
+ GRF_DPHY_TX0_FORCETXSTOPMODE,
+ GRF_DPHY_TX0_TURNREQUEST,
+ GRF_DPHY_TX1RX1_TURNDISABLE,
+ GRF_DPHY_TX1RX1_FORCERXMODE,
+ GRF_DPHY_TX1RX1_FORCETXSTOPMODE,
+ GRF_DPHY_TX1RX1_ENABLE,
+ GRF_DPHY_TX1RX1_MASTERSLAVEZ,
+ GRF_DPHY_TX1RX1_BASEDIR,
+ GRF_DPHY_TX1RX1_ENABLECLK,
+ GRF_DPHY_TX1RX1_TURNREQUEST,
+ GRF_DPHY_RX1_SRC_SEL,
+ /* rk3288 only */
+ GRF_CON_DISABLE_ISP,
+ GRF_CON_ISP_DPHY_SEL,
+ GRF_DSI_CSI_TESTBUS_SEL,
+ GRF_DVP_V18SEL,
+ /* below is for rk3399 only */
+ GRF_DPHY_RX0_CLK_INV_SEL,
+ GRF_DPHY_RX1_CLK_INV_SEL,
+};
+
+struct dphy_reg {
+ u16 offset;
+ u8 mask;
+ u8 shift;
+};
+
+#define PHY_REG(_offset, _width, _shift) \
+ { .offset = _offset, .mask = BIT(_width) - 1, .shift = _shift, }
+
+static const struct dphy_reg rk3399_grf_dphy_regs[] = {
+ [GRF_DPHY_RX0_TURNREQUEST] = PHY_REG(RK3399_GRF_SOC_CON9, 4, 0),
+ [GRF_DPHY_RX0_CLK_INV_SEL] = PHY_REG(RK3399_GRF_SOC_CON9, 1, 10),
+ [GRF_DPHY_RX1_CLK_INV_SEL] = PHY_REG(RK3399_GRF_SOC_CON9, 1, 11),
+ [GRF_DPHY_RX0_ENABLE] = PHY_REG(RK3399_GRF_SOC_CON21, 4, 0),
+ [GRF_DPHY_RX0_FORCERXMODE] = PHY_REG(RK3399_GRF_SOC_CON21, 4, 4),
+ [GRF_DPHY_RX0_FORCETXSTOPMODE] = PHY_REG(RK3399_GRF_SOC_CON21, 4, 8),
+ [GRF_DPHY_RX0_TURNDISABLE] = PHY_REG(RK3399_GRF_SOC_CON21, 4, 12),
+ [GRF_DPHY_TX0_FORCERXMODE] = PHY_REG(RK3399_GRF_SOC_CON22, 4, 0),
+ [GRF_DPHY_TX0_FORCETXSTOPMODE] = PHY_REG(RK3399_GRF_SOC_CON22, 4, 4),
+ [GRF_DPHY_TX0_TURNDISABLE] = PHY_REG(RK3399_GRF_SOC_CON22, 4, 8),
+ [GRF_DPHY_TX0_TURNREQUEST] = PHY_REG(RK3399_GRF_SOC_CON22, 4, 12),
+ [GRF_DPHY_TX1RX1_ENABLE] = PHY_REG(RK3399_GRF_SOC_CON23, 4, 0),
+ [GRF_DPHY_TX1RX1_FORCERXMODE] = PHY_REG(RK3399_GRF_SOC_CON23, 4, 4),
+ [GRF_DPHY_TX1RX1_FORCETXSTOPMODE] = PHY_REG(RK3399_GRF_SOC_CON23, 4, 8),
+ [GRF_DPHY_TX1RX1_TURNDISABLE] = PHY_REG(RK3399_GRF_SOC_CON23, 4, 12),
+ [GRF_DPHY_TX1RX1_TURNREQUEST] = PHY_REG(RK3399_GRF_SOC_CON24, 4, 0),
+ [GRF_DPHY_RX1_SRC_SEL] = PHY_REG(RK3399_GRF_SOC_CON24, 1, 4),
+ [GRF_DPHY_TX1RX1_BASEDIR] = PHY_REG(RK3399_GRF_SOC_CON24, 1, 5),
+ [GRF_DPHY_TX1RX1_ENABLECLK] = PHY_REG(RK3399_GRF_SOC_CON24, 1, 6),
+ [GRF_DPHY_TX1RX1_MASTERSLAVEZ] = PHY_REG(RK3399_GRF_SOC_CON24, 1, 7),
+ [GRF_DPHY_RX0_TESTDIN] = PHY_REG(RK3399_GRF_SOC_CON25, 8, 0),
+ [GRF_DPHY_RX0_TESTEN] = PHY_REG(RK3399_GRF_SOC_CON25, 1, 8),
+ [GRF_DPHY_RX0_TESTCLK] = PHY_REG(RK3399_GRF_SOC_CON25, 1, 9),
+ [GRF_DPHY_RX0_TESTCLR] = PHY_REG(RK3399_GRF_SOC_CON25, 1, 10),
+ [GRF_DPHY_RX0_TESTDOUT] = PHY_REG(RK3399_GRF_SOC_STATUS1, 8, 0),
+};
+
+struct rk_dphy_drv_data {
+ const char * const *clks;
+ unsigned int num_clks;
+ const struct hsfreq_range *hsfreq_ranges;
+ unsigned int num_hsfreq_ranges;
+ const struct dphy_reg *regs;
+};
+
+struct rk_dphy {
+ struct device *dev;
+ struct regmap *grf;
+ struct clk_bulk_data *clks;
+
+ const struct rk_dphy_drv_data *drv_data;
+ struct phy_configure_opts_mipi_dphy config;
+
+ u8 hsfreq;
+};
+
+static inline void rk_dphy_write_grf(struct rk_dphy *priv,
+ unsigned int index, u8 value)
+{
+ const struct dphy_reg *reg = &priv->drv_data->regs[index];
+ /* Update high word */
+ unsigned int val = (value << reg->shift) |
+ (reg->mask << (reg->shift + 16));
+
+ if (WARN_ON(!reg->offset))
+ return;
+ regmap_write(priv->grf, reg->offset, val);
+}
+
+static void rk_dphy_write(struct rk_dphy *priv, u8 test_code, u8 test_data)
+{
+ rk_dphy_write_grf(priv, GRF_DPHY_RX0_TESTDIN, test_code);
+ rk_dphy_write_grf(priv, GRF_DPHY_RX0_TESTEN, 1);
+ /*
+ * With the falling edge on TESTCLK, the TESTDIN[7:0] signal content
+ * is latched internally as the current test code. Test data is
+ * programmed internally by rising edge on TESTCLK.
+ * This code assumes that TESTCLK is already 1.
+ */
+ rk_dphy_write_grf(priv, GRF_DPHY_RX0_TESTCLK, 0);
+ rk_dphy_write_grf(priv, GRF_DPHY_RX0_TESTEN, 0);
+ rk_dphy_write_grf(priv, GRF_DPHY_RX0_TESTDIN, test_data);
+ rk_dphy_write_grf(priv, GRF_DPHY_RX0_TESTCLK, 1);
+}
+
+static void rk_dphy_enable(struct rk_dphy *priv)
+{
+ rk_dphy_write_grf(priv, GRF_DPHY_RX0_FORCERXMODE, 0);
+ rk_dphy_write_grf(priv, GRF_DPHY_RX0_FORCETXSTOPMODE, 0);
+
+ /* Disable lane turn around, which is ignored in receive mode */
+ rk_dphy_write_grf(priv, GRF_DPHY_RX0_TURNREQUEST, 0);
+ rk_dphy_write_grf(priv, GRF_DPHY_RX0_TURNDISABLE, 0xf);
+
+ rk_dphy_write_grf(priv, GRF_DPHY_RX0_ENABLE,
+ GENMASK(priv->config.lanes - 1, 0));
+
+ /* dphy start */
+ rk_dphy_write_grf(priv, GRF_DPHY_RX0_TESTCLK, 1);
+ rk_dphy_write_grf(priv, GRF_DPHY_RX0_TESTCLR, 1);
+ usleep_range(100, 150);
+ rk_dphy_write_grf(priv, GRF_DPHY_RX0_TESTCLR, 0);
+ usleep_range(100, 150);
+
+ /* set clock lane */
+ /* HS hsfreq_range & lane 0 settle bypass */
+ rk_dphy_write(priv, CLOCK_LANE_HS_RX_CONTROL, 0);
+ /* HS RX Control of lane0 */
+ rk_dphy_write(priv, LANE0_HS_RX_CONTROL, priv->hsfreq << 1);
+ /* HS RX Control of lane1 */
+ rk_dphy_write(priv, LANE1_HS_RX_CONTROL, priv->hsfreq << 1);
+ /* HS RX Control of lane2 */
+ rk_dphy_write(priv, LANE2_HS_RX_CONTROL, priv->hsfreq << 1);
+ /* HS RX Control of lane3 */
+ rk_dphy_write(priv, LANE3_HS_RX_CONTROL, priv->hsfreq << 1);
+ /* HS RX Data Lanes Settle State Time Control */
+ rk_dphy_write(priv, LANES_THS_SETTLE_CONTROL,
+ THS_SETTLE_COUNTER_THRESHOLD);
+
+ /* Normal operation */
+ rk_dphy_write(priv, 0x0, 0);
+}
+
+static int rk_dphy_configure(struct phy *phy, union phy_configure_opts *opts)
+{
+ struct rk_dphy *priv = phy_get_drvdata(phy);
+ const struct rk_dphy_drv_data *drv_data = priv->drv_data;
+ struct phy_configure_opts_mipi_dphy *config = &opts->mipi_dphy;
+ unsigned int hsfreq = 0;
+ unsigned int i;
+ u64 data_rate_mbps;
+ int ret;
+
+ /* pass with phy_mipi_dphy_get_default_config (with pixel rate?) */
+ ret = phy_mipi_dphy_config_validate(config);
+ if (ret)
+ return ret;
+
+ data_rate_mbps = div_u64(config->hs_clk_rate, 1000 * 1000);
+
+ dev_dbg(priv->dev, "lanes %d - data_rate_mbps %llu\n",
+ config->lanes, data_rate_mbps);
+ for (i = 0; i < drv_data->num_hsfreq_ranges; i++) {
+ if (drv_data->hsfreq_ranges[i].range_h >= data_rate_mbps) {
+ hsfreq = drv_data->hsfreq_ranges[i].cfg_bit;
+ break;
+ }
+ }
+ if (!hsfreq)
+ return -EINVAL;
+
+ priv->hsfreq = hsfreq;
+ priv->config = *config;
+ return 0;
+}
+
+static int rk_dphy_power_on(struct phy *phy)
+{
+ struct rk_dphy *priv = phy_get_drvdata(phy);
+ int ret;
+
+ ret = clk_bulk_enable(priv->drv_data->num_clks, priv->clks);
+ if (ret)
+ return ret;
+
+ rk_dphy_enable(priv);
+
+ return 0;
+}
+
+static int rk_dphy_power_off(struct phy *phy)
+{
+ struct rk_dphy *priv = phy_get_drvdata(phy);
+
+ rk_dphy_write_grf(priv, GRF_DPHY_RX0_ENABLE, 0);
+ clk_bulk_disable(priv->drv_data->num_clks, priv->clks);
+ return 0;
+}
+
+static int rk_dphy_init(struct phy *phy)
+{
+ struct rk_dphy *priv = phy_get_drvdata(phy);
+
+ return clk_bulk_prepare(priv->drv_data->num_clks, priv->clks);
+}
+
+static int rk_dphy_exit(struct phy *phy)
+{
+ struct rk_dphy *priv = phy_get_drvdata(phy);
+
+ clk_bulk_unprepare(priv->drv_data->num_clks, priv->clks);
+ return 0;
+}
+
+static const struct phy_ops rk_dphy_ops = {
+ .power_on = rk_dphy_power_on,
+ .power_off = rk_dphy_power_off,
+ .init = rk_dphy_init,
+ .exit = rk_dphy_exit,
+ .configure = rk_dphy_configure,
+ .owner = THIS_MODULE,
+};
+
+static const struct rk_dphy_drv_data rk3399_mipidphy_drv_data = {
+ .clks = rk3399_mipidphy_clks,
+ .num_clks = ARRAY_SIZE(rk3399_mipidphy_clks),
+ .hsfreq_ranges = rk3399_mipidphy_hsfreq_ranges,
+ .num_hsfreq_ranges = ARRAY_SIZE(rk3399_mipidphy_hsfreq_ranges),
+ .regs = rk3399_grf_dphy_regs,
+};
+
+static const struct of_device_id rk_dphy_dt_ids[] = {
+ {
+ .compatible = "rockchip,rk3399-mipi-dphy-rx0",
+ .data = &rk3399_mipidphy_drv_data,
+ },
+ {}
+};
+MODULE_DEVICE_TABLE(of, rk_dphy_dt_ids);
+
+static int rk_dphy_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ const struct rk_dphy_drv_data *drv_data;
+ struct phy_provider *phy_provider;
+ struct rk_dphy *priv;
+ struct phy *phy;
+ unsigned int i;
+ int ret;
+
+ if (!dev->parent || !dev->parent->of_node)
+ return -ENODEV;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+ priv->dev = dev;
+
+ priv->grf = syscon_node_to_regmap(dev->parent->of_node);
+ if (IS_ERR(priv->grf)) {
+ dev_err(dev, "Can't find GRF syscon\n");
+ return -ENODEV;
+ }
+
+ drv_data = of_device_get_match_data(dev);
+ priv->drv_data = drv_data;
+ priv->clks = devm_kcalloc(&pdev->dev, drv_data->num_clks,
+ sizeof(*priv->clks), GFP_KERNEL);
+ if (!priv->clks)
+ return -ENOMEM;
+ for (i = 0; i < drv_data->num_clks; i++)
+ priv->clks[i].id = drv_data->clks[i];
+ ret = devm_clk_bulk_get(&pdev->dev, drv_data->num_clks, priv->clks);
+ if (ret)
+ return ret;
+
+ phy = devm_phy_create(dev, np, &rk_dphy_ops);
+ if (IS_ERR(phy)) {
+ dev_err(dev, "failed to create phy\n");
+ return PTR_ERR(phy);
+ }
+ phy_set_drvdata(phy, priv);
+
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+ return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static struct platform_driver rk_dphy_driver = {
+ .probe = rk_dphy_probe,
+ .driver = {
+ .name = "rockchip-mipi-dphy-rx0",
+ .of_match_table = rk_dphy_dt_ids,
+ },
+};
+module_platform_driver(rk_dphy_driver);
+
+MODULE_AUTHOR("Ezequiel Garcia <ezequiel@collabora.com>");
+MODULE_DESCRIPTION("Rockchip MIPI Synopsys DPHY RX0 driver");
+MODULE_LICENSE("Dual MIT/GPL");
diff --git a/drivers/phy/rockchip/phy-rockchip-emmc.c b/drivers/phy/rockchip/phy-rockchip-emmc.c
new file mode 100644
index 0000000000..20023f6eb9
--- /dev/null
+++ b/drivers/phy/rockchip/phy-rockchip-emmc.c
@@ -0,0 +1,426 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Rockchip emmc PHY driver
+ *
+ * Copyright (C) 2016 Shawn Lin <shawn.lin@rock-chips.com>
+ * Copyright (C) 2016 ROCKCHIP, Inc.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+/*
+ * The higher 16-bit of this register is used for write protection
+ * only if BIT(x + 16) set to 1 the BIT(x) can be written.
+ */
+#define HIWORD_UPDATE(val, mask, shift) \
+ ((val) << (shift) | (mask) << ((shift) + 16))
+
+/* Register definition */
+#define GRF_EMMCPHY_CON0 0x0
+#define GRF_EMMCPHY_CON1 0x4
+#define GRF_EMMCPHY_CON2 0x8
+#define GRF_EMMCPHY_CON3 0xc
+#define GRF_EMMCPHY_CON4 0x10
+#define GRF_EMMCPHY_CON5 0x14
+#define GRF_EMMCPHY_CON6 0x18
+#define GRF_EMMCPHY_STATUS 0x20
+
+#define PHYCTRL_PDB_MASK 0x1
+#define PHYCTRL_PDB_SHIFT 0x0
+#define PHYCTRL_PDB_PWR_ON 0x1
+#define PHYCTRL_PDB_PWR_OFF 0x0
+#define PHYCTRL_ENDLL_MASK 0x1
+#define PHYCTRL_ENDLL_SHIFT 0x1
+#define PHYCTRL_ENDLL_ENABLE 0x1
+#define PHYCTRL_ENDLL_DISABLE 0x0
+#define PHYCTRL_CALDONE_MASK 0x1
+#define PHYCTRL_CALDONE_SHIFT 0x6
+#define PHYCTRL_CALDONE_DONE 0x1
+#define PHYCTRL_CALDONE_GOING 0x0
+#define PHYCTRL_DLLRDY_MASK 0x1
+#define PHYCTRL_DLLRDY_SHIFT 0x5
+#define PHYCTRL_DLLRDY_DONE 0x1
+#define PHYCTRL_DLLRDY_GOING 0x0
+#define PHYCTRL_FREQSEL_200M 0x0
+#define PHYCTRL_FREQSEL_50M 0x1
+#define PHYCTRL_FREQSEL_100M 0x2
+#define PHYCTRL_FREQSEL_150M 0x3
+#define PHYCTRL_FREQSEL_MASK 0x3
+#define PHYCTRL_FREQSEL_SHIFT 0xc
+#define PHYCTRL_DR_MASK 0x7
+#define PHYCTRL_DR_SHIFT 0x4
+#define PHYCTRL_DR_50OHM 0x0
+#define PHYCTRL_DR_33OHM 0x1
+#define PHYCTRL_DR_66OHM 0x2
+#define PHYCTRL_DR_100OHM 0x3
+#define PHYCTRL_DR_40OHM 0x4
+#define PHYCTRL_OTAPDLYENA 0x1
+#define PHYCTRL_OTAPDLYENA_MASK 0x1
+#define PHYCTRL_OTAPDLYENA_SHIFT 0xb
+#define PHYCTRL_OTAPDLYSEL_DEFAULT 0x4
+#define PHYCTRL_OTAPDLYSEL_MAXVALUE 0xf
+#define PHYCTRL_OTAPDLYSEL_MASK 0xf
+#define PHYCTRL_OTAPDLYSEL_SHIFT 0x7
+#define PHYCTRL_REN_STRB_DISABLE 0x0
+#define PHYCTRL_REN_STRB_ENABLE 0x1
+#define PHYCTRL_REN_STRB_MASK 0x1
+#define PHYCTRL_REN_STRB_SHIFT 0x9
+
+#define PHYCTRL_IS_CALDONE(x) \
+ ((((x) >> PHYCTRL_CALDONE_SHIFT) & \
+ PHYCTRL_CALDONE_MASK) == PHYCTRL_CALDONE_DONE)
+#define PHYCTRL_IS_DLLRDY(x) \
+ ((((x) >> PHYCTRL_DLLRDY_SHIFT) & \
+ PHYCTRL_DLLRDY_MASK) == PHYCTRL_DLLRDY_DONE)
+
+struct rockchip_emmc_phy {
+ unsigned int reg_offset;
+ struct regmap *reg_base;
+ struct clk *emmcclk;
+ unsigned int drive_impedance;
+ unsigned int enable_strobe_pulldown;
+ unsigned int output_tapdelay_select;
+};
+
+static int rockchip_emmc_phy_power(struct phy *phy, bool on_off)
+{
+ struct rockchip_emmc_phy *rk_phy = phy_get_drvdata(phy);
+ unsigned int caldone;
+ unsigned int dllrdy;
+ unsigned int freqsel = PHYCTRL_FREQSEL_200M;
+ unsigned long rate;
+ int ret;
+
+ /*
+ * Keep phyctrl_pdb and phyctrl_endll low to allow
+ * initialization of CALIO state M/C DFFs
+ */
+ regmap_write(rk_phy->reg_base,
+ rk_phy->reg_offset + GRF_EMMCPHY_CON6,
+ HIWORD_UPDATE(PHYCTRL_PDB_PWR_OFF,
+ PHYCTRL_PDB_MASK,
+ PHYCTRL_PDB_SHIFT));
+ regmap_write(rk_phy->reg_base,
+ rk_phy->reg_offset + GRF_EMMCPHY_CON6,
+ HIWORD_UPDATE(PHYCTRL_ENDLL_DISABLE,
+ PHYCTRL_ENDLL_MASK,
+ PHYCTRL_ENDLL_SHIFT));
+
+ /* Already finish power_off above */
+ if (on_off == PHYCTRL_PDB_PWR_OFF)
+ return 0;
+
+ rate = clk_get_rate(rk_phy->emmcclk);
+
+ if (rate != 0) {
+ unsigned long ideal_rate;
+ unsigned long diff;
+
+ switch (rate) {
+ case 1 ... 74999999:
+ ideal_rate = 50000000;
+ freqsel = PHYCTRL_FREQSEL_50M;
+ break;
+ case 75000000 ... 124999999:
+ ideal_rate = 100000000;
+ freqsel = PHYCTRL_FREQSEL_100M;
+ break;
+ case 125000000 ... 174999999:
+ ideal_rate = 150000000;
+ freqsel = PHYCTRL_FREQSEL_150M;
+ break;
+ default:
+ ideal_rate = 200000000;
+ break;
+ }
+
+ diff = (rate > ideal_rate) ?
+ rate - ideal_rate : ideal_rate - rate;
+
+ /*
+ * In order for tuning delays to be accurate we need to be
+ * pretty spot on for the DLL range, so warn if we're too
+ * far off. Also warn if we're above the 200 MHz max. Don't
+ * warn for really slow rates since we won't be tuning then.
+ */
+ if ((rate > 50000000 && diff > 15000000) || (rate > 200000000))
+ dev_warn(&phy->dev, "Unsupported rate: %lu\n", rate);
+ }
+
+ /*
+ * According to the user manual, calpad calibration
+ * cycle takes more than 2us without the minimal recommended
+ * value, so we may need a little margin here
+ */
+ udelay(3);
+ regmap_write(rk_phy->reg_base,
+ rk_phy->reg_offset + GRF_EMMCPHY_CON6,
+ HIWORD_UPDATE(PHYCTRL_PDB_PWR_ON,
+ PHYCTRL_PDB_MASK,
+ PHYCTRL_PDB_SHIFT));
+
+ /*
+ * According to the user manual, it asks driver to wait 5us for
+ * calpad busy trimming. However it is documented that this value is
+ * PVT(A.K.A process,voltage and temperature) relevant, so some
+ * failure cases are found which indicates we should be more tolerant
+ * to calpad busy trimming.
+ */
+ ret = regmap_read_poll_timeout(rk_phy->reg_base,
+ rk_phy->reg_offset + GRF_EMMCPHY_STATUS,
+ caldone, PHYCTRL_IS_CALDONE(caldone),
+ 0, 50);
+ if (ret) {
+ pr_err("%s: caldone failed, ret=%d\n", __func__, ret);
+ return ret;
+ }
+
+ /* Set the frequency of the DLL operation */
+ regmap_write(rk_phy->reg_base,
+ rk_phy->reg_offset + GRF_EMMCPHY_CON0,
+ HIWORD_UPDATE(freqsel, PHYCTRL_FREQSEL_MASK,
+ PHYCTRL_FREQSEL_SHIFT));
+
+ /* Turn on the DLL */
+ regmap_write(rk_phy->reg_base,
+ rk_phy->reg_offset + GRF_EMMCPHY_CON6,
+ HIWORD_UPDATE(PHYCTRL_ENDLL_ENABLE,
+ PHYCTRL_ENDLL_MASK,
+ PHYCTRL_ENDLL_SHIFT));
+
+ /*
+ * We turned on the DLL even though the rate was 0 because we the
+ * clock might be turned on later. ...but we can't wait for the DLL
+ * to lock when the rate is 0 because it will never lock with no
+ * input clock.
+ *
+ * Technically we should be checking the lock later when the clock
+ * is turned on, but for now we won't.
+ */
+ if (rate == 0)
+ return 0;
+
+ /*
+ * After enabling analog DLL circuits docs say that we need 10.2 us if
+ * our source clock is at 50 MHz and that lock time scales linearly
+ * with clock speed. If we are powering on the PHY and the card clock
+ * is super slow (like 100 kHZ) this could take as long as 5.1 ms as
+ * per the math: 10.2 us * (50000000 Hz / 100000 Hz) => 5.1 ms
+ * Hopefully we won't be running at 100 kHz, but we should still make
+ * sure we wait long enough.
+ *
+ * NOTE: There appear to be corner cases where the DLL seems to take
+ * extra long to lock for reasons that aren't understood. In some
+ * extreme cases we've seen it take up to over 10ms (!). We'll be
+ * generous and give it 50ms.
+ */
+ ret = regmap_read_poll_timeout(rk_phy->reg_base,
+ rk_phy->reg_offset + GRF_EMMCPHY_STATUS,
+ dllrdy, PHYCTRL_IS_DLLRDY(dllrdy),
+ 0, 50 * USEC_PER_MSEC);
+ if (ret) {
+ pr_err("%s: dllrdy failed. ret=%d\n", __func__, ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int rockchip_emmc_phy_init(struct phy *phy)
+{
+ struct rockchip_emmc_phy *rk_phy = phy_get_drvdata(phy);
+ int ret = 0;
+
+ /*
+ * We purposely get the clock here and not in probe to avoid the
+ * circular dependency problem. We expect:
+ * - PHY driver to probe
+ * - SDHCI driver to start probe
+ * - SDHCI driver to register it's clock
+ * - SDHCI driver to get the PHY
+ * - SDHCI driver to init the PHY
+ *
+ * The clock is optional, using clk_get_optional() to get the clock
+ * and do error processing if the return value != NULL
+ *
+ * NOTE: we don't do anything special for EPROBE_DEFER here. Given the
+ * above expected use case, EPROBE_DEFER isn't sensible to expect, so
+ * it's just like any other error.
+ */
+ rk_phy->emmcclk = clk_get_optional(&phy->dev, "emmcclk");
+ if (IS_ERR(rk_phy->emmcclk)) {
+ ret = PTR_ERR(rk_phy->emmcclk);
+ dev_err(&phy->dev, "Error getting emmcclk: %d\n", ret);
+ rk_phy->emmcclk = NULL;
+ }
+
+ return ret;
+}
+
+static int rockchip_emmc_phy_exit(struct phy *phy)
+{
+ struct rockchip_emmc_phy *rk_phy = phy_get_drvdata(phy);
+
+ clk_put(rk_phy->emmcclk);
+
+ return 0;
+}
+
+static int rockchip_emmc_phy_power_off(struct phy *phy)
+{
+ /* Power down emmc phy analog blocks */
+ return rockchip_emmc_phy_power(phy, PHYCTRL_PDB_PWR_OFF);
+}
+
+static int rockchip_emmc_phy_power_on(struct phy *phy)
+{
+ struct rockchip_emmc_phy *rk_phy = phy_get_drvdata(phy);
+
+ /* Drive impedance: from DTS */
+ regmap_write(rk_phy->reg_base,
+ rk_phy->reg_offset + GRF_EMMCPHY_CON6,
+ HIWORD_UPDATE(rk_phy->drive_impedance,
+ PHYCTRL_DR_MASK,
+ PHYCTRL_DR_SHIFT));
+
+ /* Output tap delay: enable */
+ regmap_write(rk_phy->reg_base,
+ rk_phy->reg_offset + GRF_EMMCPHY_CON0,
+ HIWORD_UPDATE(PHYCTRL_OTAPDLYENA,
+ PHYCTRL_OTAPDLYENA_MASK,
+ PHYCTRL_OTAPDLYENA_SHIFT));
+
+ /* Output tap delay */
+ regmap_write(rk_phy->reg_base,
+ rk_phy->reg_offset + GRF_EMMCPHY_CON0,
+ HIWORD_UPDATE(rk_phy->output_tapdelay_select,
+ PHYCTRL_OTAPDLYSEL_MASK,
+ PHYCTRL_OTAPDLYSEL_SHIFT));
+
+ /* Internal pull-down for strobe line */
+ regmap_write(rk_phy->reg_base,
+ rk_phy->reg_offset + GRF_EMMCPHY_CON2,
+ HIWORD_UPDATE(rk_phy->enable_strobe_pulldown,
+ PHYCTRL_REN_STRB_MASK,
+ PHYCTRL_REN_STRB_SHIFT));
+
+ /* Power up emmc phy analog blocks */
+ return rockchip_emmc_phy_power(phy, PHYCTRL_PDB_PWR_ON);
+}
+
+static const struct phy_ops ops = {
+ .init = rockchip_emmc_phy_init,
+ .exit = rockchip_emmc_phy_exit,
+ .power_on = rockchip_emmc_phy_power_on,
+ .power_off = rockchip_emmc_phy_power_off,
+ .owner = THIS_MODULE,
+};
+
+static u32 convert_drive_impedance_ohm(struct platform_device *pdev, u32 dr_ohm)
+{
+ switch (dr_ohm) {
+ case 100:
+ return PHYCTRL_DR_100OHM;
+ case 66:
+ return PHYCTRL_DR_66OHM;
+ case 50:
+ return PHYCTRL_DR_50OHM;
+ case 40:
+ return PHYCTRL_DR_40OHM;
+ case 33:
+ return PHYCTRL_DR_33OHM;
+ }
+
+ dev_warn(&pdev->dev, "Invalid value %u for drive-impedance-ohm.\n",
+ dr_ohm);
+ return PHYCTRL_DR_50OHM;
+}
+
+static int rockchip_emmc_phy_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct rockchip_emmc_phy *rk_phy;
+ struct phy *generic_phy;
+ struct phy_provider *phy_provider;
+ struct regmap *grf;
+ unsigned int reg_offset;
+ u32 val;
+
+ if (!dev->parent || !dev->parent->of_node)
+ return -ENODEV;
+
+ grf = syscon_node_to_regmap(dev->parent->of_node);
+ if (IS_ERR(grf)) {
+ dev_err(dev, "Missing rockchip,grf property\n");
+ return PTR_ERR(grf);
+ }
+
+ rk_phy = devm_kzalloc(dev, sizeof(*rk_phy), GFP_KERNEL);
+ if (!rk_phy)
+ return -ENOMEM;
+
+ if (of_property_read_u32(dev->of_node, "reg", &reg_offset)) {
+ dev_err(dev, "missing reg property in node %pOFn\n",
+ dev->of_node);
+ return -EINVAL;
+ }
+
+ rk_phy->reg_offset = reg_offset;
+ rk_phy->reg_base = grf;
+ rk_phy->drive_impedance = PHYCTRL_DR_50OHM;
+ rk_phy->enable_strobe_pulldown = PHYCTRL_REN_STRB_DISABLE;
+ rk_phy->output_tapdelay_select = PHYCTRL_OTAPDLYSEL_DEFAULT;
+
+ if (!of_property_read_u32(dev->of_node, "drive-impedance-ohm", &val))
+ rk_phy->drive_impedance = convert_drive_impedance_ohm(pdev, val);
+
+ if (of_property_read_bool(dev->of_node, "rockchip,enable-strobe-pulldown"))
+ rk_phy->enable_strobe_pulldown = PHYCTRL_REN_STRB_ENABLE;
+
+ if (!of_property_read_u32(dev->of_node, "rockchip,output-tapdelay-select", &val)) {
+ if (val <= PHYCTRL_OTAPDLYSEL_MAXVALUE)
+ rk_phy->output_tapdelay_select = val;
+ else
+ dev_err(dev, "output-tapdelay-select exceeds limit, apply default\n");
+ }
+
+ generic_phy = devm_phy_create(dev, dev->of_node, &ops);
+ if (IS_ERR(generic_phy)) {
+ dev_err(dev, "failed to create PHY\n");
+ return PTR_ERR(generic_phy);
+ }
+
+ phy_set_drvdata(generic_phy, rk_phy);
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+ return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id rockchip_emmc_phy_dt_ids[] = {
+ { .compatible = "rockchip,rk3399-emmc-phy" },
+ {}
+};
+
+MODULE_DEVICE_TABLE(of, rockchip_emmc_phy_dt_ids);
+
+static struct platform_driver rockchip_emmc_driver = {
+ .probe = rockchip_emmc_phy_probe,
+ .driver = {
+ .name = "rockchip-emmc-phy",
+ .of_match_table = rockchip_emmc_phy_dt_ids,
+ },
+};
+
+module_platform_driver(rockchip_emmc_driver);
+
+MODULE_AUTHOR("Shawn Lin <shawn.lin@rock-chips.com>");
+MODULE_DESCRIPTION("Rockchip EMMC PHY driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/rockchip/phy-rockchip-inno-csidphy.c b/drivers/phy/rockchip/phy-rockchip-inno-csidphy.c
new file mode 100644
index 0000000000..98c92d6c48
--- /dev/null
+++ b/drivers/phy/rockchip/phy-rockchip-inno-csidphy.c
@@ -0,0 +1,481 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Rockchip MIPI RX Innosilicon DPHY driver
+ *
+ * Copyright (C) 2021 Fuzhou Rockchip Electronics Co., Ltd.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/phy/phy.h>
+#include <linux/phy/phy-mipi-dphy.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+
+/* GRF */
+#define RK1808_GRF_PD_VI_CON_OFFSET 0x0430
+
+#define RK3326_GRF_PD_VI_CON_OFFSET 0x0430
+
+#define RK3368_GRF_SOC_CON6_OFFSET 0x0418
+
+#define RK3568_GRF_VI_CON0 0x0340
+#define RK3568_GRF_VI_CON1 0x0344
+
+/* PHY */
+#define CSIDPHY_CTRL_LANE_ENABLE 0x00
+#define CSIDPHY_CTRL_LANE_ENABLE_CK BIT(6)
+#define CSIDPHY_CTRL_LANE_ENABLE_MASK GENMASK(5, 2)
+#define CSIDPHY_CTRL_LANE_ENABLE_UNDEFINED BIT(0)
+
+/* not present on all variants */
+#define CSIDPHY_CTRL_PWRCTL 0x04
+#define CSIDPHY_CTRL_PWRCTL_UNDEFINED GENMASK(7, 5)
+#define CSIDPHY_CTRL_PWRCTL_SYNCRST BIT(2)
+#define CSIDPHY_CTRL_PWRCTL_LDO_PD BIT(1)
+#define CSIDPHY_CTRL_PWRCTL_PLL_PD BIT(0)
+
+#define CSIDPHY_CTRL_DIG_RST 0x80
+#define CSIDPHY_CTRL_DIG_RST_UNDEFINED 0x1e
+#define CSIDPHY_CTRL_DIG_RST_RESET BIT(0)
+
+/* offset after ths_settle_offset */
+#define CSIDPHY_CLK_THS_SETTLE 0
+#define CSIDPHY_LANE_THS_SETTLE(n) (((n) + 1) * 0x80)
+#define CSIDPHY_THS_SETTLE_MASK GENMASK(6, 0)
+
+/* offset after calib_offset */
+#define CSIDPHY_CLK_CALIB_EN 0
+#define CSIDPHY_LANE_CALIB_EN(n) (((n) + 1) * 0x80)
+#define CSIDPHY_CALIB_EN BIT(7)
+
+/* Configure the count time of the THS-SETTLE by protocol. */
+#define RK1808_CSIDPHY_CLK_WR_THS_SETTLE 0x160
+#define RK3326_CSIDPHY_CLK_WR_THS_SETTLE 0x100
+#define RK3368_CSIDPHY_CLK_WR_THS_SETTLE 0x100
+#define RK3568_CSIDPHY_CLK_WR_THS_SETTLE 0x160
+
+/* Calibration reception enable */
+#define RK1808_CSIDPHY_CLK_CALIB_EN 0x168
+#define RK3568_CSIDPHY_CLK_CALIB_EN 0x168
+
+/*
+ * The higher 16-bit of this register is used for write protection
+ * only if BIT(x + 16) set to 1 the BIT(x) can be written.
+ */
+#define HIWORD_UPDATE(val, mask, shift) \
+ ((val) << (shift) | (mask) << ((shift) + 16))
+
+#define HZ_TO_MHZ(freq) div_u64(freq, 1000 * 1000)
+
+enum dphy_reg_id {
+ /* rk1808 & rk3326 */
+ GRF_DPHY_CSIPHY_FORCERXMODE,
+ GRF_DPHY_CSIPHY_CLKLANE_EN,
+ GRF_DPHY_CSIPHY_DATALANE_EN,
+};
+
+struct dphy_reg {
+ u32 offset;
+ u32 mask;
+ u32 shift;
+};
+
+#define PHY_REG(_offset, _width, _shift) \
+ { .offset = _offset, .mask = BIT(_width) - 1, .shift = _shift, }
+
+static const struct dphy_reg rk1808_grf_dphy_regs[] = {
+ [GRF_DPHY_CSIPHY_FORCERXMODE] = PHY_REG(RK1808_GRF_PD_VI_CON_OFFSET, 4, 0),
+ [GRF_DPHY_CSIPHY_CLKLANE_EN] = PHY_REG(RK1808_GRF_PD_VI_CON_OFFSET, 1, 8),
+ [GRF_DPHY_CSIPHY_DATALANE_EN] = PHY_REG(RK1808_GRF_PD_VI_CON_OFFSET, 4, 4),
+};
+
+static const struct dphy_reg rk3326_grf_dphy_regs[] = {
+ [GRF_DPHY_CSIPHY_FORCERXMODE] = PHY_REG(RK3326_GRF_PD_VI_CON_OFFSET, 4, 0),
+ [GRF_DPHY_CSIPHY_CLKLANE_EN] = PHY_REG(RK3326_GRF_PD_VI_CON_OFFSET, 1, 8),
+ [GRF_DPHY_CSIPHY_DATALANE_EN] = PHY_REG(RK3326_GRF_PD_VI_CON_OFFSET, 4, 4),
+};
+
+static const struct dphy_reg rk3368_grf_dphy_regs[] = {
+ [GRF_DPHY_CSIPHY_FORCERXMODE] = PHY_REG(RK3368_GRF_SOC_CON6_OFFSET, 4, 8),
+};
+
+static const struct dphy_reg rk3568_grf_dphy_regs[] = {
+ [GRF_DPHY_CSIPHY_FORCERXMODE] = PHY_REG(RK3568_GRF_VI_CON0, 4, 0),
+ [GRF_DPHY_CSIPHY_DATALANE_EN] = PHY_REG(RK3568_GRF_VI_CON0, 4, 4),
+ [GRF_DPHY_CSIPHY_CLKLANE_EN] = PHY_REG(RK3568_GRF_VI_CON0, 1, 8),
+};
+
+struct hsfreq_range {
+ u32 range_h;
+ u8 cfg_bit;
+};
+
+struct dphy_drv_data {
+ int pwrctl_offset;
+ int ths_settle_offset;
+ int calib_offset;
+ const struct hsfreq_range *hsfreq_ranges;
+ int num_hsfreq_ranges;
+ const struct dphy_reg *grf_regs;
+};
+
+struct rockchip_inno_csidphy {
+ struct device *dev;
+ void __iomem *phy_base;
+ struct clk *pclk;
+ struct regmap *grf;
+ struct reset_control *rst;
+ const struct dphy_drv_data *drv_data;
+ struct phy_configure_opts_mipi_dphy config;
+ u8 hsfreq;
+};
+
+static inline void write_grf_reg(struct rockchip_inno_csidphy *priv,
+ int index, u8 value)
+{
+ const struct dphy_drv_data *drv_data = priv->drv_data;
+ const struct dphy_reg *reg = &drv_data->grf_regs[index];
+
+ if (reg->offset)
+ regmap_write(priv->grf, reg->offset,
+ HIWORD_UPDATE(value, reg->mask, reg->shift));
+}
+
+/* These tables must be sorted by .range_h ascending. */
+static const struct hsfreq_range rk1808_mipidphy_hsfreq_ranges[] = {
+ { 109, 0x02}, { 149, 0x03}, { 199, 0x06}, { 249, 0x06},
+ { 299, 0x06}, { 399, 0x08}, { 499, 0x0b}, { 599, 0x0e},
+ { 699, 0x10}, { 799, 0x12}, { 999, 0x16}, {1199, 0x1e},
+ {1399, 0x23}, {1599, 0x2d}, {1799, 0x32}, {1999, 0x37},
+ {2199, 0x3c}, {2399, 0x41}, {2499, 0x46}
+};
+
+static const struct hsfreq_range rk3326_mipidphy_hsfreq_ranges[] = {
+ { 109, 0x00}, { 149, 0x01}, { 199, 0x02}, { 249, 0x03},
+ { 299, 0x04}, { 399, 0x05}, { 499, 0x06}, { 599, 0x07},
+ { 699, 0x08}, { 799, 0x09}, { 899, 0x0a}, {1099, 0x0b},
+ {1249, 0x0c}, {1349, 0x0d}, {1500, 0x0e}
+};
+
+static const struct hsfreq_range rk3368_mipidphy_hsfreq_ranges[] = {
+ { 109, 0x00}, { 149, 0x01}, { 199, 0x02}, { 249, 0x03},
+ { 299, 0x04}, { 399, 0x05}, { 499, 0x06}, { 599, 0x07},
+ { 699, 0x08}, { 799, 0x09}, { 899, 0x0a}, {1099, 0x0b},
+ {1249, 0x0c}, {1349, 0x0d}, {1500, 0x0e}
+};
+
+static void rockchip_inno_csidphy_ths_settle(struct rockchip_inno_csidphy *priv,
+ int hsfreq, int offset)
+{
+ const struct dphy_drv_data *drv_data = priv->drv_data;
+ u32 val;
+
+ val = readl(priv->phy_base + drv_data->ths_settle_offset + offset);
+ val &= ~CSIDPHY_THS_SETTLE_MASK;
+ val |= hsfreq;
+ writel(val, priv->phy_base + drv_data->ths_settle_offset + offset);
+}
+
+static int rockchip_inno_csidphy_configure(struct phy *phy,
+ union phy_configure_opts *opts)
+{
+ struct rockchip_inno_csidphy *priv = phy_get_drvdata(phy);
+ const struct dphy_drv_data *drv_data = priv->drv_data;
+ struct phy_configure_opts_mipi_dphy *config = &opts->mipi_dphy;
+ unsigned int hsfreq = 0;
+ unsigned int i;
+ u64 data_rate_mbps;
+ int ret;
+
+ /* pass with phy_mipi_dphy_get_default_config (with pixel rate?) */
+ ret = phy_mipi_dphy_config_validate(config);
+ if (ret)
+ return ret;
+
+ data_rate_mbps = HZ_TO_MHZ(config->hs_clk_rate);
+
+ dev_dbg(priv->dev, "lanes %d - data_rate_mbps %llu\n",
+ config->lanes, data_rate_mbps);
+ for (i = 0; i < drv_data->num_hsfreq_ranges; i++) {
+ if (drv_data->hsfreq_ranges[i].range_h >= data_rate_mbps) {
+ hsfreq = drv_data->hsfreq_ranges[i].cfg_bit;
+ break;
+ }
+ }
+ if (!hsfreq)
+ return -EINVAL;
+
+ priv->hsfreq = hsfreq;
+ priv->config = *config;
+ return 0;
+}
+
+static int rockchip_inno_csidphy_power_on(struct phy *phy)
+{
+ struct rockchip_inno_csidphy *priv = phy_get_drvdata(phy);
+ const struct dphy_drv_data *drv_data = priv->drv_data;
+ u64 data_rate_mbps = HZ_TO_MHZ(priv->config.hs_clk_rate);
+ u32 val;
+ int ret, i;
+
+ ret = clk_enable(priv->pclk);
+ if (ret < 0)
+ return ret;
+
+ ret = pm_runtime_resume_and_get(priv->dev);
+ if (ret < 0) {
+ clk_disable(priv->pclk);
+ return ret;
+ }
+
+ /* phy start */
+ if (drv_data->pwrctl_offset >= 0)
+ writel(CSIDPHY_CTRL_PWRCTL_UNDEFINED |
+ CSIDPHY_CTRL_PWRCTL_SYNCRST,
+ priv->phy_base + drv_data->pwrctl_offset);
+
+ /* set data lane num and enable clock lane */
+ val = FIELD_PREP(CSIDPHY_CTRL_LANE_ENABLE_MASK, GENMASK(priv->config.lanes - 1, 0)) |
+ FIELD_PREP(CSIDPHY_CTRL_LANE_ENABLE_CK, 1) |
+ FIELD_PREP(CSIDPHY_CTRL_LANE_ENABLE_UNDEFINED, 1);
+ writel(val, priv->phy_base + CSIDPHY_CTRL_LANE_ENABLE);
+
+ /* Reset dphy analog part */
+ if (drv_data->pwrctl_offset >= 0)
+ writel(CSIDPHY_CTRL_PWRCTL_UNDEFINED,
+ priv->phy_base + drv_data->pwrctl_offset);
+ usleep_range(500, 1000);
+
+ /* Reset dphy digital part */
+ writel(CSIDPHY_CTRL_DIG_RST_UNDEFINED,
+ priv->phy_base + CSIDPHY_CTRL_DIG_RST);
+ writel(CSIDPHY_CTRL_DIG_RST_UNDEFINED + CSIDPHY_CTRL_DIG_RST_RESET,
+ priv->phy_base + CSIDPHY_CTRL_DIG_RST);
+
+ /* not into receive mode/wait stopstate */
+ write_grf_reg(priv, GRF_DPHY_CSIPHY_FORCERXMODE, 0x0);
+
+ /* enable calibration */
+ if (data_rate_mbps > 1500 && drv_data->calib_offset >= 0) {
+ writel(CSIDPHY_CALIB_EN,
+ priv->phy_base + drv_data->calib_offset +
+ CSIDPHY_CLK_CALIB_EN);
+ for (i = 0; i < priv->config.lanes; i++)
+ writel(CSIDPHY_CALIB_EN,
+ priv->phy_base + drv_data->calib_offset +
+ CSIDPHY_LANE_CALIB_EN(i));
+ }
+
+ rockchip_inno_csidphy_ths_settle(priv, priv->hsfreq,
+ CSIDPHY_CLK_THS_SETTLE);
+ for (i = 0; i < priv->config.lanes; i++)
+ rockchip_inno_csidphy_ths_settle(priv, priv->hsfreq,
+ CSIDPHY_LANE_THS_SETTLE(i));
+
+ write_grf_reg(priv, GRF_DPHY_CSIPHY_CLKLANE_EN, 0x1);
+ write_grf_reg(priv, GRF_DPHY_CSIPHY_DATALANE_EN,
+ GENMASK(priv->config.lanes - 1, 0));
+
+ return 0;
+}
+
+static int rockchip_inno_csidphy_power_off(struct phy *phy)
+{
+ struct rockchip_inno_csidphy *priv = phy_get_drvdata(phy);
+ const struct dphy_drv_data *drv_data = priv->drv_data;
+
+ /* disable all lanes */
+ writel(CSIDPHY_CTRL_LANE_ENABLE_UNDEFINED,
+ priv->phy_base + CSIDPHY_CTRL_LANE_ENABLE);
+
+ /* disable pll and ldo */
+ if (drv_data->pwrctl_offset >= 0)
+ writel(CSIDPHY_CTRL_PWRCTL_UNDEFINED |
+ CSIDPHY_CTRL_PWRCTL_LDO_PD |
+ CSIDPHY_CTRL_PWRCTL_PLL_PD,
+ priv->phy_base + drv_data->pwrctl_offset);
+ usleep_range(500, 1000);
+
+ pm_runtime_put(priv->dev);
+ clk_disable(priv->pclk);
+
+ return 0;
+}
+
+static int rockchip_inno_csidphy_init(struct phy *phy)
+{
+ struct rockchip_inno_csidphy *priv = phy_get_drvdata(phy);
+
+ return clk_prepare(priv->pclk);
+}
+
+static int rockchip_inno_csidphy_exit(struct phy *phy)
+{
+ struct rockchip_inno_csidphy *priv = phy_get_drvdata(phy);
+
+ clk_unprepare(priv->pclk);
+
+ return 0;
+}
+
+static const struct phy_ops rockchip_inno_csidphy_ops = {
+ .power_on = rockchip_inno_csidphy_power_on,
+ .power_off = rockchip_inno_csidphy_power_off,
+ .init = rockchip_inno_csidphy_init,
+ .exit = rockchip_inno_csidphy_exit,
+ .configure = rockchip_inno_csidphy_configure,
+ .owner = THIS_MODULE,
+};
+
+static const struct dphy_drv_data rk1808_mipidphy_drv_data = {
+ .pwrctl_offset = -1,
+ .ths_settle_offset = RK1808_CSIDPHY_CLK_WR_THS_SETTLE,
+ .calib_offset = RK1808_CSIDPHY_CLK_CALIB_EN,
+ .hsfreq_ranges = rk1808_mipidphy_hsfreq_ranges,
+ .num_hsfreq_ranges = ARRAY_SIZE(rk1808_mipidphy_hsfreq_ranges),
+ .grf_regs = rk1808_grf_dphy_regs,
+};
+
+static const struct dphy_drv_data rk3326_mipidphy_drv_data = {
+ .pwrctl_offset = CSIDPHY_CTRL_PWRCTL,
+ .ths_settle_offset = RK3326_CSIDPHY_CLK_WR_THS_SETTLE,
+ .calib_offset = -1,
+ .hsfreq_ranges = rk3326_mipidphy_hsfreq_ranges,
+ .num_hsfreq_ranges = ARRAY_SIZE(rk3326_mipidphy_hsfreq_ranges),
+ .grf_regs = rk3326_grf_dphy_regs,
+};
+
+static const struct dphy_drv_data rk3368_mipidphy_drv_data = {
+ .pwrctl_offset = CSIDPHY_CTRL_PWRCTL,
+ .ths_settle_offset = RK3368_CSIDPHY_CLK_WR_THS_SETTLE,
+ .calib_offset = -1,
+ .hsfreq_ranges = rk3368_mipidphy_hsfreq_ranges,
+ .num_hsfreq_ranges = ARRAY_SIZE(rk3368_mipidphy_hsfreq_ranges),
+ .grf_regs = rk3368_grf_dphy_regs,
+};
+
+static const struct dphy_drv_data rk3568_mipidphy_drv_data = {
+ .pwrctl_offset = -1,
+ .ths_settle_offset = RK3568_CSIDPHY_CLK_WR_THS_SETTLE,
+ .calib_offset = RK3568_CSIDPHY_CLK_CALIB_EN,
+ .hsfreq_ranges = rk1808_mipidphy_hsfreq_ranges,
+ .num_hsfreq_ranges = ARRAY_SIZE(rk1808_mipidphy_hsfreq_ranges),
+ .grf_regs = rk3568_grf_dphy_regs,
+};
+
+static const struct of_device_id rockchip_inno_csidphy_match_id[] = {
+ {
+ .compatible = "rockchip,px30-csi-dphy",
+ .data = &rk3326_mipidphy_drv_data,
+ },
+ {
+ .compatible = "rockchip,rk1808-csi-dphy",
+ .data = &rk1808_mipidphy_drv_data,
+ },
+ {
+ .compatible = "rockchip,rk3326-csi-dphy",
+ .data = &rk3326_mipidphy_drv_data,
+ },
+ {
+ .compatible = "rockchip,rk3368-csi-dphy",
+ .data = &rk3368_mipidphy_drv_data,
+ },
+ {
+ .compatible = "rockchip,rk3568-csi-dphy",
+ .data = &rk3568_mipidphy_drv_data,
+ },
+ {}
+};
+MODULE_DEVICE_TABLE(of, rockchip_inno_csidphy_match_id);
+
+static int rockchip_inno_csidphy_probe(struct platform_device *pdev)
+{
+ struct rockchip_inno_csidphy *priv;
+ struct device *dev = &pdev->dev;
+ struct phy_provider *phy_provider;
+ struct phy *phy;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->dev = dev;
+ platform_set_drvdata(pdev, priv);
+
+ priv->drv_data = of_device_get_match_data(dev);
+ if (!priv->drv_data) {
+ dev_err(dev, "Can't find device data\n");
+ return -ENODEV;
+ }
+
+ priv->grf = syscon_regmap_lookup_by_phandle(dev->of_node,
+ "rockchip,grf");
+ if (IS_ERR(priv->grf)) {
+ dev_err(dev, "Can't find GRF syscon\n");
+ return PTR_ERR(priv->grf);
+ }
+
+ priv->phy_base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(priv->phy_base))
+ return PTR_ERR(priv->phy_base);
+
+ priv->pclk = devm_clk_get(dev, "pclk");
+ if (IS_ERR(priv->pclk)) {
+ dev_err(dev, "failed to get pclk\n");
+ return PTR_ERR(priv->pclk);
+ }
+
+ priv->rst = devm_reset_control_get(dev, "apb");
+ if (IS_ERR(priv->rst)) {
+ dev_err(dev, "failed to get system reset control\n");
+ return PTR_ERR(priv->rst);
+ }
+
+ phy = devm_phy_create(dev, NULL, &rockchip_inno_csidphy_ops);
+ if (IS_ERR(phy)) {
+ dev_err(dev, "failed to create phy\n");
+ return PTR_ERR(phy);
+ }
+
+ phy_set_drvdata(phy, priv);
+
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+ if (IS_ERR(phy_provider)) {
+ dev_err(dev, "failed to register phy provider\n");
+ return PTR_ERR(phy_provider);
+ }
+
+ pm_runtime_enable(dev);
+
+ return 0;
+}
+
+static void rockchip_inno_csidphy_remove(struct platform_device *pdev)
+{
+ struct rockchip_inno_csidphy *priv = platform_get_drvdata(pdev);
+
+ pm_runtime_disable(priv->dev);
+}
+
+static struct platform_driver rockchip_inno_csidphy_driver = {
+ .driver = {
+ .name = "rockchip-inno-csidphy",
+ .of_match_table = rockchip_inno_csidphy_match_id,
+ },
+ .probe = rockchip_inno_csidphy_probe,
+ .remove_new = rockchip_inno_csidphy_remove,
+};
+
+module_platform_driver(rockchip_inno_csidphy_driver);
+MODULE_AUTHOR("Heiko Stuebner <heiko.stuebner@theobroma-systems.com>");
+MODULE_DESCRIPTION("Rockchip MIPI Innosilicon CSI-DPHY driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c b/drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c
new file mode 100644
index 0000000000..6405943a26
--- /dev/null
+++ b/drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c
@@ -0,0 +1,793 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018 Rockchip Electronics Co. Ltd.
+ *
+ * Author: Wyon Bi <bivvy.bi@rock-chips.com>
+ */
+
+#include <linux/bits.h>
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/iopoll.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/reset.h>
+#include <linux/time64.h>
+
+#include <linux/phy/phy.h>
+#include <linux/phy/phy-mipi-dphy.h>
+
+#define UPDATE(x, h, l) (((x) << (l)) & GENMASK((h), (l)))
+
+/*
+ * The offset address[7:0] is distributed two parts, one from the bit7 to bit5
+ * is the first address, the other from the bit4 to bit0 is the second address.
+ * when you configure the registers, you must set both of them. The Clock Lane
+ * and Data Lane use the same registers with the same second address, but the
+ * first address is different.
+ */
+#define FIRST_ADDRESS(x) (((x) & 0x7) << 5)
+#define SECOND_ADDRESS(x) (((x) & 0x1f) << 0)
+#define PHY_REG(first, second) (FIRST_ADDRESS(first) | \
+ SECOND_ADDRESS(second))
+
+/* Analog Register Part: reg00 */
+#define BANDGAP_POWER_MASK BIT(7)
+#define BANDGAP_POWER_DOWN BIT(7)
+#define BANDGAP_POWER_ON 0
+#define LANE_EN_MASK GENMASK(6, 2)
+#define LANE_EN_CK BIT(6)
+#define LANE_EN_3 BIT(5)
+#define LANE_EN_2 BIT(4)
+#define LANE_EN_1 BIT(3)
+#define LANE_EN_0 BIT(2)
+#define POWER_WORK_MASK GENMASK(1, 0)
+#define POWER_WORK_ENABLE UPDATE(1, 1, 0)
+#define POWER_WORK_DISABLE UPDATE(2, 1, 0)
+/* Analog Register Part: reg01 */
+#define REG_SYNCRST_MASK BIT(2)
+#define REG_SYNCRST_RESET BIT(2)
+#define REG_SYNCRST_NORMAL 0
+#define REG_LDOPD_MASK BIT(1)
+#define REG_LDOPD_POWER_DOWN BIT(1)
+#define REG_LDOPD_POWER_ON 0
+#define REG_PLLPD_MASK BIT(0)
+#define REG_PLLPD_POWER_DOWN BIT(0)
+#define REG_PLLPD_POWER_ON 0
+/* Analog Register Part: reg03 */
+#define REG_FBDIV_HI_MASK BIT(5)
+#define REG_FBDIV_HI(x) UPDATE((x >> 8), 5, 5)
+#define REG_PREDIV_MASK GENMASK(4, 0)
+#define REG_PREDIV(x) UPDATE(x, 4, 0)
+/* Analog Register Part: reg04 */
+#define REG_FBDIV_LO_MASK GENMASK(7, 0)
+#define REG_FBDIV_LO(x) UPDATE(x, 7, 0)
+/* Analog Register Part: reg05 */
+#define SAMPLE_CLOCK_PHASE_MASK GENMASK(6, 4)
+#define SAMPLE_CLOCK_PHASE(x) UPDATE(x, 6, 4)
+#define CLOCK_LANE_SKEW_PHASE_MASK GENMASK(2, 0)
+#define CLOCK_LANE_SKEW_PHASE(x) UPDATE(x, 2, 0)
+/* Analog Register Part: reg06 */
+#define DATA_LANE_3_SKEW_PHASE_MASK GENMASK(6, 4)
+#define DATA_LANE_3_SKEW_PHASE(x) UPDATE(x, 6, 4)
+#define DATA_LANE_2_SKEW_PHASE_MASK GENMASK(2, 0)
+#define DATA_LANE_2_SKEW_PHASE(x) UPDATE(x, 2, 0)
+/* Analog Register Part: reg07 */
+#define DATA_LANE_1_SKEW_PHASE_MASK GENMASK(6, 4)
+#define DATA_LANE_1_SKEW_PHASE(x) UPDATE(x, 6, 4)
+#define DATA_LANE_0_SKEW_PHASE_MASK GENMASK(2, 0)
+#define DATA_LANE_0_SKEW_PHASE(x) UPDATE(x, 2, 0)
+/* Analog Register Part: reg08 */
+#define PLL_POST_DIV_ENABLE_MASK BIT(5)
+#define PLL_POST_DIV_ENABLE BIT(5)
+#define SAMPLE_CLOCK_DIRECTION_MASK BIT(4)
+#define SAMPLE_CLOCK_DIRECTION_REVERSE BIT(4)
+#define SAMPLE_CLOCK_DIRECTION_FORWARD 0
+#define LOWFRE_EN_MASK BIT(5)
+#define PLL_OUTPUT_FREQUENCY_DIV_BY_1 0
+#define PLL_OUTPUT_FREQUENCY_DIV_BY_2 1
+/* Analog Register Part: reg0b */
+#define CLOCK_LANE_VOD_RANGE_SET_MASK GENMASK(3, 0)
+#define CLOCK_LANE_VOD_RANGE_SET(x) UPDATE(x, 3, 0)
+#define VOD_MIN_RANGE 0x1
+#define VOD_MID_RANGE 0x3
+#define VOD_BIG_RANGE 0x7
+#define VOD_MAX_RANGE 0xf
+/* Analog Register Part: reg1E */
+#define PLL_MODE_SEL_MASK GENMASK(6, 5)
+#define PLL_MODE_SEL_LVDS_MODE 0
+#define PLL_MODE_SEL_MIPI_MODE BIT(5)
+/* Digital Register Part: reg00 */
+#define REG_DIG_RSTN_MASK BIT(0)
+#define REG_DIG_RSTN_NORMAL BIT(0)
+#define REG_DIG_RSTN_RESET 0
+/* Digital Register Part: reg01 */
+#define INVERT_TXCLKESC_MASK BIT(1)
+#define INVERT_TXCLKESC_ENABLE BIT(1)
+#define INVERT_TXCLKESC_DISABLE 0
+#define INVERT_TXBYTECLKHS_MASK BIT(0)
+#define INVERT_TXBYTECLKHS_ENABLE BIT(0)
+#define INVERT_TXBYTECLKHS_DISABLE 0
+/* Clock/Data0/Data1/Data2/Data3 Lane Register Part: reg05 */
+#define T_LPX_CNT_MASK GENMASK(5, 0)
+#define T_LPX_CNT(x) UPDATE(x, 5, 0)
+/* Clock/Data0/Data1/Data2/Data3 Lane Register Part: reg06 */
+#define T_HS_ZERO_CNT_HI_MASK BIT(7)
+#define T_HS_ZERO_CNT_HI(x) UPDATE(x, 7, 7)
+#define T_HS_PREPARE_CNT_MASK GENMASK(6, 0)
+#define T_HS_PREPARE_CNT(x) UPDATE(x, 6, 0)
+/* Clock/Data0/Data1/Data2/Data3 Lane Register Part: reg07 */
+#define T_HS_ZERO_CNT_LO_MASK GENMASK(5, 0)
+#define T_HS_ZERO_CNT_LO(x) UPDATE(x, 5, 0)
+/* Clock/Data0/Data1/Data2/Data3 Lane Register Part: reg08 */
+#define T_HS_TRAIL_CNT_MASK GENMASK(6, 0)
+#define T_HS_TRAIL_CNT(x) UPDATE(x, 6, 0)
+/* Clock/Data0/Data1/Data2/Data3 Lane Register Part: reg09 */
+#define T_HS_EXIT_CNT_LO_MASK GENMASK(4, 0)
+#define T_HS_EXIT_CNT_LO(x) UPDATE(x, 4, 0)
+/* Clock/Data0/Data1/Data2/Data3 Lane Register Part: reg0a */
+#define T_CLK_POST_CNT_LO_MASK GENMASK(3, 0)
+#define T_CLK_POST_CNT_LO(x) UPDATE(x, 3, 0)
+/* Clock/Data0/Data1/Data2/Data3 Lane Register Part: reg0c */
+#define LPDT_TX_PPI_SYNC_MASK BIT(2)
+#define LPDT_TX_PPI_SYNC_ENABLE BIT(2)
+#define LPDT_TX_PPI_SYNC_DISABLE 0
+#define T_WAKEUP_CNT_HI_MASK GENMASK(1, 0)
+#define T_WAKEUP_CNT_HI(x) UPDATE(x, 1, 0)
+/* Clock/Data0/Data1/Data2/Data3 Lane Register Part: reg0d */
+#define T_WAKEUP_CNT_LO_MASK GENMASK(7, 0)
+#define T_WAKEUP_CNT_LO(x) UPDATE(x, 7, 0)
+/* Clock/Data0/Data1/Data2/Data3 Lane Register Part: reg0e */
+#define T_CLK_PRE_CNT_MASK GENMASK(3, 0)
+#define T_CLK_PRE_CNT(x) UPDATE(x, 3, 0)
+/* Clock/Data0/Data1/Data2/Data3 Lane Register Part: reg10 */
+#define T_CLK_POST_CNT_HI_MASK GENMASK(7, 6)
+#define T_CLK_POST_CNT_HI(x) UPDATE(x, 7, 6)
+#define T_TA_GO_CNT_MASK GENMASK(5, 0)
+#define T_TA_GO_CNT(x) UPDATE(x, 5, 0)
+/* Clock/Data0/Data1/Data2/Data3 Lane Register Part: reg11 */
+#define T_HS_EXIT_CNT_HI_MASK BIT(6)
+#define T_HS_EXIT_CNT_HI(x) UPDATE(x, 6, 6)
+#define T_TA_SURE_CNT_MASK GENMASK(5, 0)
+#define T_TA_SURE_CNT(x) UPDATE(x, 5, 0)
+/* Clock/Data0/Data1/Data2/Data3 Lane Register Part: reg12 */
+#define T_TA_WAIT_CNT_MASK GENMASK(5, 0)
+#define T_TA_WAIT_CNT(x) UPDATE(x, 5, 0)
+/* LVDS Register Part: reg00 */
+#define LVDS_DIGITAL_INTERNAL_RESET_MASK BIT(2)
+#define LVDS_DIGITAL_INTERNAL_RESET_DISABLE BIT(2)
+#define LVDS_DIGITAL_INTERNAL_RESET_ENABLE 0
+/* LVDS Register Part: reg01 */
+#define LVDS_DIGITAL_INTERNAL_ENABLE_MASK BIT(7)
+#define LVDS_DIGITAL_INTERNAL_ENABLE BIT(7)
+#define LVDS_DIGITAL_INTERNAL_DISABLE 0
+/* LVDS Register Part: reg03 */
+#define MODE_ENABLE_MASK GENMASK(2, 0)
+#define TTL_MODE_ENABLE BIT(2)
+#define LVDS_MODE_ENABLE BIT(1)
+#define MIPI_MODE_ENABLE BIT(0)
+/* LVDS Register Part: reg0b */
+#define LVDS_LANE_EN_MASK GENMASK(7, 3)
+#define LVDS_DATA_LANE0_EN BIT(7)
+#define LVDS_DATA_LANE1_EN BIT(6)
+#define LVDS_DATA_LANE2_EN BIT(5)
+#define LVDS_DATA_LANE3_EN BIT(4)
+#define LVDS_CLK_LANE_EN BIT(3)
+#define LVDS_PLL_POWER_MASK BIT(2)
+#define LVDS_PLL_POWER_OFF BIT(2)
+#define LVDS_PLL_POWER_ON 0
+#define LVDS_BANDGAP_POWER_MASK BIT(0)
+#define LVDS_BANDGAP_POWER_DOWN BIT(0)
+#define LVDS_BANDGAP_POWER_ON 0
+
+#define DSI_PHY_RSTZ 0xa0
+#define PHY_ENABLECLK BIT(2)
+#define DSI_PHY_STATUS 0xb0
+#define PHY_LOCK BIT(0)
+
+enum phy_max_rate {
+ MAX_1GHZ,
+ MAX_2_5GHZ,
+};
+
+struct inno_video_phy_plat_data {
+ const struct inno_mipi_dphy_timing *inno_mipi_dphy_timing_table;
+ const unsigned int num_timings;
+ enum phy_max_rate max_rate;
+};
+
+struct inno_dsidphy {
+ struct device *dev;
+ struct clk *ref_clk;
+ struct clk *pclk_phy;
+ struct clk *pclk_host;
+ const struct inno_video_phy_plat_data *pdata;
+ void __iomem *phy_base;
+ void __iomem *host_base;
+ struct reset_control *rst;
+ enum phy_mode mode;
+ struct phy_configure_opts_mipi_dphy dphy_cfg;
+
+ struct clk *pll_clk;
+ struct {
+ struct clk_hw hw;
+ u8 prediv;
+ u16 fbdiv;
+ unsigned long rate;
+ } pll;
+};
+
+enum {
+ REGISTER_PART_ANALOG,
+ REGISTER_PART_DIGITAL,
+ REGISTER_PART_CLOCK_LANE,
+ REGISTER_PART_DATA0_LANE,
+ REGISTER_PART_DATA1_LANE,
+ REGISTER_PART_DATA2_LANE,
+ REGISTER_PART_DATA3_LANE,
+ REGISTER_PART_LVDS,
+};
+
+struct inno_mipi_dphy_timing {
+ unsigned long rate;
+ u8 lpx;
+ u8 hs_prepare;
+ u8 clk_lane_hs_zero;
+ u8 data_lane_hs_zero;
+ u8 hs_trail;
+};
+
+static const
+struct inno_mipi_dphy_timing inno_mipi_dphy_timing_table_max_1ghz[] = {
+ { 110000000, 0x0, 0x20, 0x16, 0x02, 0x22},
+ { 150000000, 0x0, 0x06, 0x16, 0x03, 0x45},
+ { 200000000, 0x0, 0x18, 0x17, 0x04, 0x0b},
+ { 250000000, 0x0, 0x05, 0x17, 0x05, 0x16},
+ { 300000000, 0x0, 0x51, 0x18, 0x06, 0x2c},
+ { 400000000, 0x0, 0x64, 0x19, 0x07, 0x33},
+ { 500000000, 0x0, 0x20, 0x1b, 0x07, 0x4e},
+ { 600000000, 0x0, 0x6a, 0x1d, 0x08, 0x3a},
+ { 700000000, 0x0, 0x3e, 0x1e, 0x08, 0x6a},
+ { 800000000, 0x0, 0x21, 0x1f, 0x09, 0x29},
+ {1000000000, 0x0, 0x09, 0x20, 0x09, 0x27},
+};
+
+static const
+struct inno_mipi_dphy_timing inno_mipi_dphy_timing_table_max_2_5ghz[] = {
+ { 110000000, 0x02, 0x7f, 0x16, 0x02, 0x02},
+ { 150000000, 0x02, 0x7f, 0x16, 0x03, 0x02},
+ { 200000000, 0x02, 0x7f, 0x17, 0x04, 0x02},
+ { 250000000, 0x02, 0x7f, 0x17, 0x05, 0x04},
+ { 300000000, 0x02, 0x7f, 0x18, 0x06, 0x04},
+ { 400000000, 0x03, 0x7e, 0x19, 0x07, 0x04},
+ { 500000000, 0x03, 0x7c, 0x1b, 0x07, 0x08},
+ { 600000000, 0x03, 0x70, 0x1d, 0x08, 0x10},
+ { 700000000, 0x05, 0x40, 0x1e, 0x08, 0x30},
+ { 800000000, 0x05, 0x02, 0x1f, 0x09, 0x30},
+ {1000000000, 0x05, 0x08, 0x20, 0x09, 0x30},
+ {1200000000, 0x06, 0x03, 0x32, 0x14, 0x0f},
+ {1400000000, 0x09, 0x03, 0x32, 0x14, 0x0f},
+ {1600000000, 0x0d, 0x42, 0x36, 0x0e, 0x0f},
+ {1800000000, 0x0e, 0x47, 0x7a, 0x0e, 0x0f},
+ {2000000000, 0x11, 0x64, 0x7a, 0x0e, 0x0b},
+ {2200000000, 0x13, 0x64, 0x7e, 0x15, 0x0b},
+ {2400000000, 0x13, 0x33, 0x7f, 0x15, 0x6a},
+ {2500000000, 0x15, 0x54, 0x7f, 0x15, 0x6a},
+};
+
+static void phy_update_bits(struct inno_dsidphy *inno,
+ u8 first, u8 second, u8 mask, u8 val)
+{
+ u32 reg = PHY_REG(first, second) << 2;
+ unsigned int tmp, orig;
+
+ orig = readl(inno->phy_base + reg);
+ tmp = orig & ~mask;
+ tmp |= val & mask;
+ writel(tmp, inno->phy_base + reg);
+}
+
+static unsigned long inno_dsidphy_pll_calc_rate(struct inno_dsidphy *inno,
+ unsigned long rate)
+{
+ unsigned long prate = clk_get_rate(inno->ref_clk);
+ unsigned long best_freq = 0;
+ unsigned long fref, fout;
+ u8 min_prediv, max_prediv;
+ u8 _prediv, best_prediv = 1;
+ u16 _fbdiv, best_fbdiv = 1;
+ u32 min_delta = UINT_MAX;
+
+ /*
+ * The PLL output frequency can be calculated using a simple formula:
+ * PLL_Output_Frequency = (FREF / PREDIV * FBDIV) / 2
+ * PLL_Output_Frequency: it is equal to DDR-Clock-Frequency * 2
+ */
+ fref = prate / 2;
+ if (rate > 1000000000UL)
+ fout = 1000000000UL;
+ else
+ fout = rate;
+
+ /* 5Mhz < Fref / prediv < 40MHz */
+ min_prediv = DIV_ROUND_UP(fref, 40000000);
+ max_prediv = fref / 5000000;
+
+ for (_prediv = min_prediv; _prediv <= max_prediv; _prediv++) {
+ u64 tmp;
+ u32 delta;
+
+ tmp = (u64)fout * _prediv;
+ do_div(tmp, fref);
+ _fbdiv = tmp;
+
+ /*
+ * The possible settings of feedback divider are
+ * 12, 13, 14, 16, ~ 511
+ */
+ if (_fbdiv == 15)
+ continue;
+
+ if (_fbdiv < 12 || _fbdiv > 511)
+ continue;
+
+ tmp = (u64)_fbdiv * fref;
+ do_div(tmp, _prediv);
+
+ delta = abs(fout - tmp);
+ if (!delta) {
+ best_prediv = _prediv;
+ best_fbdiv = _fbdiv;
+ best_freq = tmp;
+ break;
+ } else if (delta < min_delta) {
+ best_prediv = _prediv;
+ best_fbdiv = _fbdiv;
+ best_freq = tmp;
+ min_delta = delta;
+ }
+ }
+
+ if (best_freq) {
+ inno->pll.prediv = best_prediv;
+ inno->pll.fbdiv = best_fbdiv;
+ inno->pll.rate = best_freq;
+ }
+
+ return best_freq;
+}
+
+static void inno_dsidphy_mipi_mode_enable(struct inno_dsidphy *inno)
+{
+ struct phy_configure_opts_mipi_dphy *cfg = &inno->dphy_cfg;
+ const struct inno_mipi_dphy_timing *timings;
+ u32 t_txbyteclkhs, t_txclkesc;
+ u32 txbyteclkhs, txclkesc, esc_clk_div;
+ u32 hs_exit, clk_post, clk_pre, wakeup, lpx, ta_go, ta_sure, ta_wait;
+ u32 hs_prepare, hs_trail, hs_zero, clk_lane_hs_zero, data_lane_hs_zero;
+ unsigned int i;
+
+ timings = inno->pdata->inno_mipi_dphy_timing_table;
+
+ inno_dsidphy_pll_calc_rate(inno, cfg->hs_clk_rate);
+
+ /* Select MIPI mode */
+ phy_update_bits(inno, REGISTER_PART_LVDS, 0x03,
+ MODE_ENABLE_MASK, MIPI_MODE_ENABLE);
+ /* Configure PLL */
+ phy_update_bits(inno, REGISTER_PART_ANALOG, 0x03,
+ REG_PREDIV_MASK, REG_PREDIV(inno->pll.prediv));
+ phy_update_bits(inno, REGISTER_PART_ANALOG, 0x03,
+ REG_FBDIV_HI_MASK, REG_FBDIV_HI(inno->pll.fbdiv));
+ phy_update_bits(inno, REGISTER_PART_ANALOG, 0x04,
+ REG_FBDIV_LO_MASK, REG_FBDIV_LO(inno->pll.fbdiv));
+ if (inno->pdata->max_rate == MAX_2_5GHZ) {
+ phy_update_bits(inno, REGISTER_PART_ANALOG, 0x08,
+ PLL_POST_DIV_ENABLE_MASK, PLL_POST_DIV_ENABLE);
+ phy_update_bits(inno, REGISTER_PART_ANALOG, 0x0b,
+ CLOCK_LANE_VOD_RANGE_SET_MASK,
+ CLOCK_LANE_VOD_RANGE_SET(VOD_MAX_RANGE));
+ }
+ /* Enable PLL and LDO */
+ phy_update_bits(inno, REGISTER_PART_ANALOG, 0x01,
+ REG_LDOPD_MASK | REG_PLLPD_MASK,
+ REG_LDOPD_POWER_ON | REG_PLLPD_POWER_ON);
+ /* Reset analog */
+ phy_update_bits(inno, REGISTER_PART_ANALOG, 0x01,
+ REG_SYNCRST_MASK, REG_SYNCRST_RESET);
+ udelay(1);
+ phy_update_bits(inno, REGISTER_PART_ANALOG, 0x01,
+ REG_SYNCRST_MASK, REG_SYNCRST_NORMAL);
+ /* Reset digital */
+ phy_update_bits(inno, REGISTER_PART_DIGITAL, 0x00,
+ REG_DIG_RSTN_MASK, REG_DIG_RSTN_RESET);
+ udelay(1);
+ phy_update_bits(inno, REGISTER_PART_DIGITAL, 0x00,
+ REG_DIG_RSTN_MASK, REG_DIG_RSTN_NORMAL);
+
+ txbyteclkhs = inno->pll.rate / 8;
+ t_txbyteclkhs = div_u64(PSEC_PER_SEC, txbyteclkhs);
+
+ esc_clk_div = DIV_ROUND_UP(txbyteclkhs, 20000000);
+ txclkesc = txbyteclkhs / esc_clk_div;
+ t_txclkesc = div_u64(PSEC_PER_SEC, txclkesc);
+
+ /*
+ * The value of counter for HS Ths-exit
+ * Ths-exit = Tpin_txbyteclkhs * value
+ */
+ hs_exit = DIV_ROUND_UP(cfg->hs_exit, t_txbyteclkhs);
+ /*
+ * The value of counter for HS Tclk-post
+ * Tclk-post = Tpin_txbyteclkhs * value
+ */
+ clk_post = DIV_ROUND_UP(cfg->clk_post, t_txbyteclkhs);
+ /*
+ * The value of counter for HS Tclk-pre
+ * Tclk-pre = Tpin_txbyteclkhs * value
+ */
+ clk_pre = DIV_ROUND_UP(cfg->clk_pre, BITS_PER_BYTE);
+
+ /*
+ * The value of counter for HS Tta-go
+ * Tta-go for turnaround
+ * Tta-go = Ttxclkesc * value
+ */
+ ta_go = DIV_ROUND_UP(cfg->ta_go, t_txclkesc);
+ /*
+ * The value of counter for HS Tta-sure
+ * Tta-sure for turnaround
+ * Tta-sure = Ttxclkesc * value
+ */
+ ta_sure = DIV_ROUND_UP(cfg->ta_sure, t_txclkesc);
+ /*
+ * The value of counter for HS Tta-wait
+ * Tta-wait for turnaround
+ * Tta-wait = Ttxclkesc * value
+ */
+ ta_wait = DIV_ROUND_UP(cfg->ta_get, t_txclkesc);
+
+ for (i = 0; i < inno->pdata->num_timings; i++)
+ if (inno->pll.rate <= timings[i].rate)
+ break;
+
+ if (i == inno->pdata->num_timings)
+ --i;
+
+ /*
+ * The value of counter for HS Tlpx Time
+ * Tlpx = Tpin_txbyteclkhs * (2 + value)
+ */
+ if (inno->pdata->max_rate == MAX_1GHZ) {
+ lpx = DIV_ROUND_UP(cfg->lpx, t_txbyteclkhs);
+ if (lpx >= 2)
+ lpx -= 2;
+ } else
+ lpx = timings[i].lpx;
+
+ hs_prepare = timings[i].hs_prepare;
+ hs_trail = timings[i].hs_trail;
+ clk_lane_hs_zero = timings[i].clk_lane_hs_zero;
+ data_lane_hs_zero = timings[i].data_lane_hs_zero;
+ wakeup = 0x3ff;
+
+ for (i = REGISTER_PART_CLOCK_LANE; i <= REGISTER_PART_DATA3_LANE; i++) {
+ if (i == REGISTER_PART_CLOCK_LANE)
+ hs_zero = clk_lane_hs_zero;
+ else
+ hs_zero = data_lane_hs_zero;
+
+ phy_update_bits(inno, i, 0x05, T_LPX_CNT_MASK,
+ T_LPX_CNT(lpx));
+ phy_update_bits(inno, i, 0x06, T_HS_PREPARE_CNT_MASK,
+ T_HS_PREPARE_CNT(hs_prepare));
+ if (inno->pdata->max_rate == MAX_2_5GHZ)
+ phy_update_bits(inno, i, 0x06, T_HS_ZERO_CNT_HI_MASK,
+ T_HS_ZERO_CNT_HI(hs_zero >> 6));
+ phy_update_bits(inno, i, 0x07, T_HS_ZERO_CNT_LO_MASK,
+ T_HS_ZERO_CNT_LO(hs_zero));
+ phy_update_bits(inno, i, 0x08, T_HS_TRAIL_CNT_MASK,
+ T_HS_TRAIL_CNT(hs_trail));
+ if (inno->pdata->max_rate == MAX_2_5GHZ)
+ phy_update_bits(inno, i, 0x11, T_HS_EXIT_CNT_HI_MASK,
+ T_HS_EXIT_CNT_HI(hs_exit >> 5));
+ phy_update_bits(inno, i, 0x09, T_HS_EXIT_CNT_LO_MASK,
+ T_HS_EXIT_CNT_LO(hs_exit));
+ if (inno->pdata->max_rate == MAX_2_5GHZ)
+ phy_update_bits(inno, i, 0x10, T_CLK_POST_CNT_HI_MASK,
+ T_CLK_POST_CNT_HI(clk_post >> 4));
+ phy_update_bits(inno, i, 0x0a, T_CLK_POST_CNT_LO_MASK,
+ T_CLK_POST_CNT_LO(clk_post));
+ phy_update_bits(inno, i, 0x0e, T_CLK_PRE_CNT_MASK,
+ T_CLK_PRE_CNT(clk_pre));
+ phy_update_bits(inno, i, 0x0c, T_WAKEUP_CNT_HI_MASK,
+ T_WAKEUP_CNT_HI(wakeup >> 8));
+ phy_update_bits(inno, i, 0x0d, T_WAKEUP_CNT_LO_MASK,
+ T_WAKEUP_CNT_LO(wakeup));
+ phy_update_bits(inno, i, 0x10, T_TA_GO_CNT_MASK,
+ T_TA_GO_CNT(ta_go));
+ phy_update_bits(inno, i, 0x11, T_TA_SURE_CNT_MASK,
+ T_TA_SURE_CNT(ta_sure));
+ phy_update_bits(inno, i, 0x12, T_TA_WAIT_CNT_MASK,
+ T_TA_WAIT_CNT(ta_wait));
+ }
+
+ /* Enable all lanes on analog part */
+ phy_update_bits(inno, REGISTER_PART_ANALOG, 0x00,
+ LANE_EN_MASK, LANE_EN_CK | LANE_EN_3 | LANE_EN_2 |
+ LANE_EN_1 | LANE_EN_0);
+}
+
+static void inno_dsidphy_lvds_mode_enable(struct inno_dsidphy *inno)
+{
+ u8 prediv = 2;
+ u16 fbdiv = 28;
+
+ /* Sample clock reverse direction */
+ phy_update_bits(inno, REGISTER_PART_ANALOG, 0x08,
+ SAMPLE_CLOCK_DIRECTION_MASK | LOWFRE_EN_MASK,
+ SAMPLE_CLOCK_DIRECTION_REVERSE |
+ PLL_OUTPUT_FREQUENCY_DIV_BY_1);
+
+ /* Select LVDS mode */
+ phy_update_bits(inno, REGISTER_PART_LVDS, 0x03,
+ MODE_ENABLE_MASK, LVDS_MODE_ENABLE);
+ /* Configure PLL */
+ phy_update_bits(inno, REGISTER_PART_ANALOG, 0x03,
+ REG_PREDIV_MASK, REG_PREDIV(prediv));
+ phy_update_bits(inno, REGISTER_PART_ANALOG, 0x03,
+ REG_FBDIV_HI_MASK, REG_FBDIV_HI(fbdiv));
+ phy_update_bits(inno, REGISTER_PART_ANALOG, 0x04,
+ REG_FBDIV_LO_MASK, REG_FBDIV_LO(fbdiv));
+ phy_update_bits(inno, REGISTER_PART_LVDS, 0x08, 0xff, 0xfc);
+ /* Enable PLL and Bandgap */
+ phy_update_bits(inno, REGISTER_PART_LVDS, 0x0b,
+ LVDS_PLL_POWER_MASK | LVDS_BANDGAP_POWER_MASK,
+ LVDS_PLL_POWER_ON | LVDS_BANDGAP_POWER_ON);
+
+ msleep(20);
+
+ /* Select PLL mode */
+ phy_update_bits(inno, REGISTER_PART_ANALOG, 0x1e,
+ PLL_MODE_SEL_MASK, PLL_MODE_SEL_LVDS_MODE);
+
+ /* Reset LVDS digital logic */
+ phy_update_bits(inno, REGISTER_PART_LVDS, 0x00,
+ LVDS_DIGITAL_INTERNAL_RESET_MASK,
+ LVDS_DIGITAL_INTERNAL_RESET_ENABLE);
+ udelay(1);
+ phy_update_bits(inno, REGISTER_PART_LVDS, 0x00,
+ LVDS_DIGITAL_INTERNAL_RESET_MASK,
+ LVDS_DIGITAL_INTERNAL_RESET_DISABLE);
+ /* Enable LVDS digital logic */
+ phy_update_bits(inno, REGISTER_PART_LVDS, 0x01,
+ LVDS_DIGITAL_INTERNAL_ENABLE_MASK,
+ LVDS_DIGITAL_INTERNAL_ENABLE);
+ /* Enable LVDS analog driver */
+ phy_update_bits(inno, REGISTER_PART_LVDS, 0x0b,
+ LVDS_LANE_EN_MASK, LVDS_CLK_LANE_EN |
+ LVDS_DATA_LANE0_EN | LVDS_DATA_LANE1_EN |
+ LVDS_DATA_LANE2_EN | LVDS_DATA_LANE3_EN);
+}
+
+static int inno_dsidphy_power_on(struct phy *phy)
+{
+ struct inno_dsidphy *inno = phy_get_drvdata(phy);
+
+ clk_prepare_enable(inno->pclk_phy);
+ clk_prepare_enable(inno->ref_clk);
+ pm_runtime_get_sync(inno->dev);
+
+ /* Bandgap power on */
+ phy_update_bits(inno, REGISTER_PART_ANALOG, 0x00,
+ BANDGAP_POWER_MASK, BANDGAP_POWER_ON);
+ /* Enable power work */
+ phy_update_bits(inno, REGISTER_PART_ANALOG, 0x00,
+ POWER_WORK_MASK, POWER_WORK_ENABLE);
+
+ switch (inno->mode) {
+ case PHY_MODE_MIPI_DPHY:
+ inno_dsidphy_mipi_mode_enable(inno);
+ break;
+ case PHY_MODE_LVDS:
+ inno_dsidphy_lvds_mode_enable(inno);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int inno_dsidphy_power_off(struct phy *phy)
+{
+ struct inno_dsidphy *inno = phy_get_drvdata(phy);
+
+ phy_update_bits(inno, REGISTER_PART_ANALOG, 0x00, LANE_EN_MASK, 0);
+ phy_update_bits(inno, REGISTER_PART_ANALOG, 0x01,
+ REG_LDOPD_MASK | REG_PLLPD_MASK,
+ REG_LDOPD_POWER_DOWN | REG_PLLPD_POWER_DOWN);
+ phy_update_bits(inno, REGISTER_PART_ANALOG, 0x00,
+ POWER_WORK_MASK, POWER_WORK_DISABLE);
+ phy_update_bits(inno, REGISTER_PART_ANALOG, 0x00,
+ BANDGAP_POWER_MASK, BANDGAP_POWER_DOWN);
+
+ phy_update_bits(inno, REGISTER_PART_LVDS, 0x0b, LVDS_LANE_EN_MASK, 0);
+ phy_update_bits(inno, REGISTER_PART_LVDS, 0x01,
+ LVDS_DIGITAL_INTERNAL_ENABLE_MASK,
+ LVDS_DIGITAL_INTERNAL_DISABLE);
+ phy_update_bits(inno, REGISTER_PART_LVDS, 0x0b,
+ LVDS_PLL_POWER_MASK | LVDS_BANDGAP_POWER_MASK,
+ LVDS_PLL_POWER_OFF | LVDS_BANDGAP_POWER_DOWN);
+
+ pm_runtime_put(inno->dev);
+ clk_disable_unprepare(inno->ref_clk);
+ clk_disable_unprepare(inno->pclk_phy);
+
+ return 0;
+}
+
+static int inno_dsidphy_set_mode(struct phy *phy, enum phy_mode mode,
+ int submode)
+{
+ struct inno_dsidphy *inno = phy_get_drvdata(phy);
+
+ switch (mode) {
+ case PHY_MODE_MIPI_DPHY:
+ case PHY_MODE_LVDS:
+ inno->mode = mode;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int inno_dsidphy_configure(struct phy *phy,
+ union phy_configure_opts *opts)
+{
+ struct inno_dsidphy *inno = phy_get_drvdata(phy);
+ int ret;
+
+ if (inno->mode != PHY_MODE_MIPI_DPHY)
+ return -EINVAL;
+
+ ret = phy_mipi_dphy_config_validate(&opts->mipi_dphy);
+ if (ret)
+ return ret;
+
+ memcpy(&inno->dphy_cfg, &opts->mipi_dphy, sizeof(inno->dphy_cfg));
+
+ return 0;
+}
+
+static const struct phy_ops inno_dsidphy_ops = {
+ .configure = inno_dsidphy_configure,
+ .set_mode = inno_dsidphy_set_mode,
+ .power_on = inno_dsidphy_power_on,
+ .power_off = inno_dsidphy_power_off,
+ .owner = THIS_MODULE,
+};
+
+static const struct inno_video_phy_plat_data max_1ghz_video_phy_plat_data = {
+ .inno_mipi_dphy_timing_table = inno_mipi_dphy_timing_table_max_1ghz,
+ .num_timings = ARRAY_SIZE(inno_mipi_dphy_timing_table_max_1ghz),
+ .max_rate = MAX_1GHZ,
+};
+
+static const struct inno_video_phy_plat_data max_2_5ghz_video_phy_plat_data = {
+ .inno_mipi_dphy_timing_table = inno_mipi_dphy_timing_table_max_2_5ghz,
+ .num_timings = ARRAY_SIZE(inno_mipi_dphy_timing_table_max_2_5ghz),
+ .max_rate = MAX_2_5GHZ,
+};
+
+static int inno_dsidphy_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct inno_dsidphy *inno;
+ struct phy_provider *phy_provider;
+ struct phy *phy;
+ int ret;
+
+ inno = devm_kzalloc(dev, sizeof(*inno), GFP_KERNEL);
+ if (!inno)
+ return -ENOMEM;
+
+ inno->dev = dev;
+ inno->pdata = of_device_get_match_data(inno->dev);
+ platform_set_drvdata(pdev, inno);
+
+ inno->phy_base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(inno->phy_base))
+ return PTR_ERR(inno->phy_base);
+
+ inno->ref_clk = devm_clk_get(dev, "ref");
+ if (IS_ERR(inno->ref_clk)) {
+ ret = PTR_ERR(inno->ref_clk);
+ dev_err(dev, "failed to get ref clock: %d\n", ret);
+ return ret;
+ }
+
+ inno->pclk_phy = devm_clk_get(dev, "pclk");
+ if (IS_ERR(inno->pclk_phy)) {
+ ret = PTR_ERR(inno->pclk_phy);
+ dev_err(dev, "failed to get phy pclk: %d\n", ret);
+ return ret;
+ }
+
+ inno->rst = devm_reset_control_get(dev, "apb");
+ if (IS_ERR(inno->rst)) {
+ ret = PTR_ERR(inno->rst);
+ dev_err(dev, "failed to get system reset control: %d\n", ret);
+ return ret;
+ }
+
+ phy = devm_phy_create(dev, NULL, &inno_dsidphy_ops);
+ if (IS_ERR(phy)) {
+ ret = PTR_ERR(phy);
+ dev_err(dev, "failed to create phy: %d\n", ret);
+ return ret;
+ }
+
+ phy_set_drvdata(phy, inno);
+
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+ if (IS_ERR(phy_provider)) {
+ ret = PTR_ERR(phy_provider);
+ dev_err(dev, "failed to register phy provider: %d\n", ret);
+ return ret;
+ }
+
+ pm_runtime_enable(dev);
+
+ return 0;
+}
+
+static void inno_dsidphy_remove(struct platform_device *pdev)
+{
+ struct inno_dsidphy *inno = platform_get_drvdata(pdev);
+
+ pm_runtime_disable(inno->dev);
+}
+
+static const struct of_device_id inno_dsidphy_of_match[] = {
+ {
+ .compatible = "rockchip,px30-dsi-dphy",
+ .data = &max_1ghz_video_phy_plat_data,
+ }, {
+ .compatible = "rockchip,rk3128-dsi-dphy",
+ .data = &max_1ghz_video_phy_plat_data,
+ }, {
+ .compatible = "rockchip,rk3368-dsi-dphy",
+ .data = &max_1ghz_video_phy_plat_data,
+ }, {
+ .compatible = "rockchip,rk3568-dsi-dphy",
+ .data = &max_2_5ghz_video_phy_plat_data,
+ }, {
+ .compatible = "rockchip,rv1126-dsi-dphy",
+ .data = &max_2_5ghz_video_phy_plat_data,
+ },
+ {}
+};
+MODULE_DEVICE_TABLE(of, inno_dsidphy_of_match);
+
+static struct platform_driver inno_dsidphy_driver = {
+ .driver = {
+ .name = "inno-dsidphy",
+ .of_match_table = of_match_ptr(inno_dsidphy_of_match),
+ },
+ .probe = inno_dsidphy_probe,
+ .remove_new = inno_dsidphy_remove,
+};
+module_platform_driver(inno_dsidphy_driver);
+
+MODULE_AUTHOR("Wyon Bi <bivvy.bi@rock-chips.com>");
+MODULE_DESCRIPTION("Innosilicon MIPI/LVDS/TTL Video Combo PHY driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c b/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c
new file mode 100644
index 0000000000..053bd62e31
--- /dev/null
+++ b/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c
@@ -0,0 +1,1438 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2017 Rockchip Electronics Co. Ltd.
+ *
+ * Author: Zheng Yang <zhengyang@rock-chips.com>
+ * Heiko Stuebner <heiko@sntech.de>
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/phy/phy.h>
+#include <linux/slab.h>
+
+#define UPDATE(x, h, l) (((x) << (l)) & GENMASK((h), (l)))
+
+/* REG: 0x00 */
+#define RK3228_PRE_PLL_REFCLK_SEL_PCLK BIT(0)
+/* REG: 0x01 */
+#define RK3228_BYPASS_RXSENSE_EN BIT(2)
+#define RK3228_BYPASS_PWRON_EN BIT(1)
+#define RK3228_BYPASS_PLLPD_EN BIT(0)
+/* REG: 0x02 */
+#define RK3228_BYPASS_PDATA_EN BIT(4)
+#define RK3228_PDATAEN_DISABLE BIT(0)
+/* REG: 0x03 */
+#define RK3228_BYPASS_AUTO_TERM_RES_CAL BIT(7)
+#define RK3228_AUTO_TERM_RES_CAL_SPEED_14_8(x) UPDATE(x, 6, 0)
+/* REG: 0x04 */
+#define RK3228_AUTO_TERM_RES_CAL_SPEED_7_0(x) UPDATE(x, 7, 0)
+/* REG: 0xaa */
+#define RK3228_POST_PLL_CTRL_MANUAL BIT(0)
+/* REG: 0xe0 */
+#define RK3228_POST_PLL_POWER_DOWN BIT(5)
+#define RK3228_PRE_PLL_POWER_DOWN BIT(4)
+#define RK3228_RXSENSE_CLK_CH_ENABLE BIT(3)
+#define RK3228_RXSENSE_DATA_CH2_ENABLE BIT(2)
+#define RK3228_RXSENSE_DATA_CH1_ENABLE BIT(1)
+#define RK3228_RXSENSE_DATA_CH0_ENABLE BIT(0)
+/* REG: 0xe1 */
+#define RK3228_BANDGAP_ENABLE BIT(4)
+#define RK3228_TMDS_DRIVER_ENABLE GENMASK(3, 0)
+/* REG: 0xe2 */
+#define RK3228_PRE_PLL_FB_DIV_8_MASK BIT(7)
+#define RK3228_PRE_PLL_FB_DIV_8(x) UPDATE((x) >> 8, 7, 7)
+#define RK3228_PCLK_VCO_DIV_5_MASK BIT(5)
+#define RK3228_PCLK_VCO_DIV_5(x) UPDATE(x, 5, 5)
+#define RK3228_PRE_PLL_PRE_DIV_MASK GENMASK(4, 0)
+#define RK3228_PRE_PLL_PRE_DIV(x) UPDATE(x, 4, 0)
+/* REG: 0xe3 */
+#define RK3228_PRE_PLL_FB_DIV_7_0(x) UPDATE(x, 7, 0)
+/* REG: 0xe4 */
+#define RK3228_PRE_PLL_PCLK_DIV_B_MASK GENMASK(6, 5)
+#define RK3228_PRE_PLL_PCLK_DIV_B_SHIFT 5
+#define RK3228_PRE_PLL_PCLK_DIV_B(x) UPDATE(x, 6, 5)
+#define RK3228_PRE_PLL_PCLK_DIV_A_MASK GENMASK(4, 0)
+#define RK3228_PRE_PLL_PCLK_DIV_A(x) UPDATE(x, 4, 0)
+/* REG: 0xe5 */
+#define RK3228_PRE_PLL_PCLK_DIV_C_MASK GENMASK(6, 5)
+#define RK3228_PRE_PLL_PCLK_DIV_C(x) UPDATE(x, 6, 5)
+#define RK3228_PRE_PLL_PCLK_DIV_D_MASK GENMASK(4, 0)
+#define RK3228_PRE_PLL_PCLK_DIV_D(x) UPDATE(x, 4, 0)
+/* REG: 0xe6 */
+#define RK3228_PRE_PLL_TMDSCLK_DIV_C_MASK GENMASK(5, 4)
+#define RK3228_PRE_PLL_TMDSCLK_DIV_C(x) UPDATE(x, 5, 4)
+#define RK3228_PRE_PLL_TMDSCLK_DIV_A_MASK GENMASK(3, 2)
+#define RK3228_PRE_PLL_TMDSCLK_DIV_A(x) UPDATE(x, 3, 2)
+#define RK3228_PRE_PLL_TMDSCLK_DIV_B_MASK GENMASK(1, 0)
+#define RK3228_PRE_PLL_TMDSCLK_DIV_B(x) UPDATE(x, 1, 0)
+/* REG: 0xe8 */
+#define RK3228_PRE_PLL_LOCK_STATUS BIT(0)
+/* REG: 0xe9 */
+#define RK3228_POST_PLL_POST_DIV_ENABLE UPDATE(3, 7, 6)
+#define RK3228_POST_PLL_PRE_DIV_MASK GENMASK(4, 0)
+#define RK3228_POST_PLL_PRE_DIV(x) UPDATE(x, 4, 0)
+/* REG: 0xea */
+#define RK3228_POST_PLL_FB_DIV_7_0(x) UPDATE(x, 7, 0)
+/* REG: 0xeb */
+#define RK3228_POST_PLL_FB_DIV_8_MASK BIT(7)
+#define RK3228_POST_PLL_FB_DIV_8(x) UPDATE((x) >> 8, 7, 7)
+#define RK3228_POST_PLL_POST_DIV_MASK GENMASK(5, 4)
+#define RK3228_POST_PLL_POST_DIV(x) UPDATE(x, 5, 4)
+#define RK3228_POST_PLL_LOCK_STATUS BIT(0)
+/* REG: 0xee */
+#define RK3228_TMDS_CH_TA_ENABLE GENMASK(7, 4)
+/* REG: 0xef */
+#define RK3228_TMDS_CLK_CH_TA(x) UPDATE(x, 7, 6)
+#define RK3228_TMDS_DATA_CH2_TA(x) UPDATE(x, 5, 4)
+#define RK3228_TMDS_DATA_CH1_TA(x) UPDATE(x, 3, 2)
+#define RK3228_TMDS_DATA_CH0_TA(x) UPDATE(x, 1, 0)
+/* REG: 0xf0 */
+#define RK3228_TMDS_DATA_CH2_PRE_EMPHASIS_MASK GENMASK(5, 4)
+#define RK3228_TMDS_DATA_CH2_PRE_EMPHASIS(x) UPDATE(x, 5, 4)
+#define RK3228_TMDS_DATA_CH1_PRE_EMPHASIS_MASK GENMASK(3, 2)
+#define RK3228_TMDS_DATA_CH1_PRE_EMPHASIS(x) UPDATE(x, 3, 2)
+#define RK3228_TMDS_DATA_CH0_PRE_EMPHASIS_MASK GENMASK(1, 0)
+#define RK3228_TMDS_DATA_CH0_PRE_EMPHASIS(x) UPDATE(x, 1, 0)
+/* REG: 0xf1 */
+#define RK3228_TMDS_CLK_CH_OUTPUT_SWING(x) UPDATE(x, 7, 4)
+#define RK3228_TMDS_DATA_CH2_OUTPUT_SWING(x) UPDATE(x, 3, 0)
+/* REG: 0xf2 */
+#define RK3228_TMDS_DATA_CH1_OUTPUT_SWING(x) UPDATE(x, 7, 4)
+#define RK3228_TMDS_DATA_CH0_OUTPUT_SWING(x) UPDATE(x, 3, 0)
+
+/* REG: 0x01 */
+#define RK3328_BYPASS_RXSENSE_EN BIT(2)
+#define RK3328_BYPASS_POWERON_EN BIT(1)
+#define RK3328_BYPASS_PLLPD_EN BIT(0)
+/* REG: 0x02 */
+#define RK3328_INT_POL_HIGH BIT(7)
+#define RK3328_BYPASS_PDATA_EN BIT(4)
+#define RK3328_PDATA_EN BIT(0)
+/* REG:0x05 */
+#define RK3328_INT_TMDS_CLK(x) UPDATE(x, 7, 4)
+#define RK3328_INT_TMDS_D2(x) UPDATE(x, 3, 0)
+/* REG:0x07 */
+#define RK3328_INT_TMDS_D1(x) UPDATE(x, 7, 4)
+#define RK3328_INT_TMDS_D0(x) UPDATE(x, 3, 0)
+/* for all RK3328_INT_TMDS_*, ESD_DET as defined in 0xc8-0xcb */
+#define RK3328_INT_AGND_LOW_PULSE_LOCKED BIT(3)
+#define RK3328_INT_RXSENSE_LOW_PULSE_LOCKED BIT(2)
+#define RK3328_INT_VSS_AGND_ESD_DET BIT(1)
+#define RK3328_INT_AGND_VSS_ESD_DET BIT(0)
+/* REG: 0xa0 */
+#define RK3328_PCLK_VCO_DIV_5_MASK BIT(1)
+#define RK3328_PCLK_VCO_DIV_5(x) UPDATE(x, 1, 1)
+#define RK3328_PRE_PLL_POWER_DOWN BIT(0)
+/* REG: 0xa1 */
+#define RK3328_PRE_PLL_PRE_DIV_MASK GENMASK(5, 0)
+#define RK3328_PRE_PLL_PRE_DIV(x) UPDATE(x, 5, 0)
+/* REG: 0xa2 */
+/* unset means center spread */
+#define RK3328_SPREAD_SPECTRUM_MOD_DOWN BIT(7)
+#define RK3328_SPREAD_SPECTRUM_MOD_DISABLE BIT(6)
+#define RK3328_PRE_PLL_FRAC_DIV_DISABLE UPDATE(3, 5, 4)
+#define RK3328_PRE_PLL_FB_DIV_11_8_MASK GENMASK(3, 0)
+#define RK3328_PRE_PLL_FB_DIV_11_8(x) UPDATE((x) >> 8, 3, 0)
+/* REG: 0xa3 */
+#define RK3328_PRE_PLL_FB_DIV_7_0(x) UPDATE(x, 7, 0)
+/* REG: 0xa4*/
+#define RK3328_PRE_PLL_TMDSCLK_DIV_C_MASK GENMASK(1, 0)
+#define RK3328_PRE_PLL_TMDSCLK_DIV_C(x) UPDATE(x, 1, 0)
+#define RK3328_PRE_PLL_TMDSCLK_DIV_B_MASK GENMASK(3, 2)
+#define RK3328_PRE_PLL_TMDSCLK_DIV_B(x) UPDATE(x, 3, 2)
+#define RK3328_PRE_PLL_TMDSCLK_DIV_A_MASK GENMASK(5, 4)
+#define RK3328_PRE_PLL_TMDSCLK_DIV_A(x) UPDATE(x, 5, 4)
+/* REG: 0xa5 */
+#define RK3328_PRE_PLL_PCLK_DIV_B_SHIFT 5
+#define RK3328_PRE_PLL_PCLK_DIV_B_MASK GENMASK(6, 5)
+#define RK3328_PRE_PLL_PCLK_DIV_B(x) UPDATE(x, 6, 5)
+#define RK3328_PRE_PLL_PCLK_DIV_A_MASK GENMASK(4, 0)
+#define RK3328_PRE_PLL_PCLK_DIV_A(x) UPDATE(x, 4, 0)
+/* REG: 0xa6 */
+#define RK3328_PRE_PLL_PCLK_DIV_C_SHIFT 5
+#define RK3328_PRE_PLL_PCLK_DIV_C_MASK GENMASK(6, 5)
+#define RK3328_PRE_PLL_PCLK_DIV_C(x) UPDATE(x, 6, 5)
+#define RK3328_PRE_PLL_PCLK_DIV_D_MASK GENMASK(4, 0)
+#define RK3328_PRE_PLL_PCLK_DIV_D(x) UPDATE(x, 4, 0)
+/* REG: 0xa9 */
+#define RK3328_PRE_PLL_LOCK_STATUS BIT(0)
+/* REG: 0xaa */
+#define RK3328_POST_PLL_POST_DIV_ENABLE GENMASK(3, 2)
+#define RK3328_POST_PLL_REFCLK_SEL_TMDS BIT(1)
+#define RK3328_POST_PLL_POWER_DOWN BIT(0)
+/* REG:0xab */
+#define RK3328_POST_PLL_FB_DIV_8(x) UPDATE((x) >> 8, 7, 7)
+#define RK3328_POST_PLL_PRE_DIV(x) UPDATE(x, 4, 0)
+/* REG: 0xac */
+#define RK3328_POST_PLL_FB_DIV_7_0(x) UPDATE(x, 7, 0)
+/* REG: 0xad */
+#define RK3328_POST_PLL_POST_DIV_MASK GENMASK(1, 0)
+#define RK3328_POST_PLL_POST_DIV_2 0x0
+#define RK3328_POST_PLL_POST_DIV_4 0x1
+#define RK3328_POST_PLL_POST_DIV_8 0x3
+/* REG: 0xaf */
+#define RK3328_POST_PLL_LOCK_STATUS BIT(0)
+/* REG: 0xb0 */
+#define RK3328_BANDGAP_ENABLE BIT(2)
+/* REG: 0xb2 */
+#define RK3328_TMDS_CLK_DRIVER_EN BIT(3)
+#define RK3328_TMDS_D2_DRIVER_EN BIT(2)
+#define RK3328_TMDS_D1_DRIVER_EN BIT(1)
+#define RK3328_TMDS_D0_DRIVER_EN BIT(0)
+#define RK3328_TMDS_DRIVER_ENABLE (RK3328_TMDS_CLK_DRIVER_EN | \
+ RK3328_TMDS_D2_DRIVER_EN | \
+ RK3328_TMDS_D1_DRIVER_EN | \
+ RK3328_TMDS_D0_DRIVER_EN)
+/* REG:0xc5 */
+#define RK3328_BYPASS_TERM_RESISTOR_CALIB BIT(7)
+#define RK3328_TERM_RESISTOR_CALIB_SPEED_14_8(x) UPDATE((x) >> 8, 6, 0)
+/* REG:0xc6 */
+#define RK3328_TERM_RESISTOR_CALIB_SPEED_7_0(x) UPDATE(x, 7, 0)
+/* REG:0xc7 */
+#define RK3328_TERM_RESISTOR_50 UPDATE(0, 2, 1)
+#define RK3328_TERM_RESISTOR_62_5 UPDATE(1, 2, 1)
+#define RK3328_TERM_RESISTOR_75 UPDATE(2, 2, 1)
+#define RK3328_TERM_RESISTOR_100 UPDATE(3, 2, 1)
+/* REG 0xc8 - 0xcb */
+#define RK3328_ESD_DETECT_MASK GENMASK(7, 6)
+#define RK3328_ESD_DETECT_340MV (0x0 << 6)
+#define RK3328_ESD_DETECT_280MV (0x1 << 6)
+#define RK3328_ESD_DETECT_260MV (0x2 << 6)
+#define RK3328_ESD_DETECT_240MV (0x3 << 6)
+/* resistors can be used in parallel */
+#define RK3328_TMDS_TERM_RESIST_MASK GENMASK(5, 0)
+#define RK3328_TMDS_TERM_RESIST_75 BIT(5)
+#define RK3328_TMDS_TERM_RESIST_150 BIT(4)
+#define RK3328_TMDS_TERM_RESIST_300 BIT(3)
+#define RK3328_TMDS_TERM_RESIST_600 BIT(2)
+#define RK3328_TMDS_TERM_RESIST_1000 BIT(1)
+#define RK3328_TMDS_TERM_RESIST_2000 BIT(0)
+/* REG: 0xd1 */
+#define RK3328_PRE_PLL_FRAC_DIV_23_16(x) UPDATE((x) >> 16, 7, 0)
+/* REG: 0xd2 */
+#define RK3328_PRE_PLL_FRAC_DIV_15_8(x) UPDATE((x) >> 8, 7, 0)
+/* REG: 0xd3 */
+#define RK3328_PRE_PLL_FRAC_DIV_7_0(x) UPDATE(x, 7, 0)
+
+struct inno_hdmi_phy_drv_data;
+
+struct inno_hdmi_phy {
+ struct device *dev;
+ struct regmap *regmap;
+ int irq;
+
+ struct phy *phy;
+ struct clk *sysclk;
+ struct clk *refoclk;
+ struct clk *refpclk;
+
+ /* platform data */
+ const struct inno_hdmi_phy_drv_data *plat_data;
+ int chip_version;
+
+ /* clk provider */
+ struct clk_hw hw;
+ struct clk *phyclk;
+ unsigned long pixclock;
+ unsigned long tmdsclock;
+};
+
+struct pre_pll_config {
+ unsigned long pixclock;
+ unsigned long tmdsclock;
+ u8 prediv;
+ u16 fbdiv;
+ u8 tmds_div_a;
+ u8 tmds_div_b;
+ u8 tmds_div_c;
+ u8 pclk_div_a;
+ u8 pclk_div_b;
+ u8 pclk_div_c;
+ u8 pclk_div_d;
+ u8 vco_div_5_en;
+ u32 fracdiv;
+};
+
+struct post_pll_config {
+ unsigned long tmdsclock;
+ u8 prediv;
+ u16 fbdiv;
+ u8 postdiv;
+ u8 version;
+};
+
+struct phy_config {
+ unsigned long tmdsclock;
+ u8 regs[14];
+};
+
+struct inno_hdmi_phy_ops {
+ int (*init)(struct inno_hdmi_phy *inno);
+ int (*power_on)(struct inno_hdmi_phy *inno,
+ const struct post_pll_config *cfg,
+ const struct phy_config *phy_cfg);
+ void (*power_off)(struct inno_hdmi_phy *inno);
+};
+
+struct inno_hdmi_phy_drv_data {
+ const struct inno_hdmi_phy_ops *ops;
+ const struct clk_ops *clk_ops;
+ const struct phy_config *phy_cfg_table;
+};
+
+static const struct pre_pll_config pre_pll_cfg_table[] = {
+ { 25175000, 25175000, 3, 125, 3, 1, 1, 1, 3, 3, 4, 0, 0xe00000},
+ { 25175000, 31468750, 1, 41, 0, 3, 3, 1, 3, 3, 4, 0, 0xf5554f},
+ { 27000000, 27000000, 1, 36, 0, 3, 3, 1, 2, 3, 4, 0, 0x0},
+ { 27000000, 33750000, 1, 45, 0, 3, 3, 1, 3, 3, 4, 0, 0x0},
+ { 31500000, 31500000, 1, 42, 0, 3, 3, 1, 2, 3, 4, 0, 0x0},
+ { 31500000, 39375000, 1, 105, 1, 3, 3, 10, 0, 3, 4, 0, 0x0},
+ { 33750000, 33750000, 1, 45, 0, 3, 3, 1, 2, 3, 4, 0, 0x0},
+ { 33750000, 42187500, 1, 169, 2, 3, 3, 15, 0, 3, 4, 0, 0x0},
+ { 35500000, 35500000, 1, 71, 2, 2, 2, 6, 0, 3, 4, 0, 0x0},
+ { 35500000, 44375000, 1, 74, 3, 1, 1, 25, 0, 1, 1, 0, 0x0},
+ { 36000000, 36000000, 1, 36, 2, 1, 1, 1, 1, 3, 4, 0, 0x0},
+ { 36000000, 45000000, 1, 45, 2, 1, 1, 15, 0, 1, 1, 0, 0x0},
+ { 40000000, 40000000, 1, 40, 2, 1, 1, 1, 1, 3, 4, 0, 0x0},
+ { 40000000, 50000000, 1, 50, 2, 1, 1, 15, 0, 1, 1, 0, 0x0},
+ { 49500000, 49500000, 1, 66, 0, 3, 3, 1, 2, 3, 4, 0, 0x0},
+ { 49500000, 61875000, 1, 165, 1, 3, 3, 10, 0, 3, 4, 0, 0x0},
+ { 50000000, 50000000, 1, 50, 2, 1, 1, 1, 1, 3, 4, 0, 0x0},
+ { 50000000, 62500000, 1, 125, 2, 2, 2, 15, 0, 2, 2, 0, 0x0},
+ { 54000000, 54000000, 1, 36, 0, 2, 2, 1, 0, 3, 4, 0, 0x0},
+ { 54000000, 67500000, 1, 45, 0, 2, 2, 1, 3, 2, 2, 0, 0x0},
+ { 56250000, 56250000, 1, 75, 0, 3, 3, 1, 2, 3, 4, 0, 0x0},
+ { 56250000, 70312500, 1, 117, 3, 1, 1, 25, 0, 1, 1, 0, 0x0},
+ { 59341000, 59341000, 1, 118, 2, 2, 2, 6, 0, 3, 4, 0, 0xae978d},
+ { 59341000, 74176250, 2, 148, 2, 1, 1, 15, 0, 1, 1, 0, 0x5a3d70},
+ { 59400000, 59400000, 1, 99, 3, 1, 1, 1, 3, 3, 4, 0, 0x0},
+ { 59400000, 74250000, 1, 99, 0, 3, 3, 1, 3, 3, 4, 0, 0x0},
+ { 65000000, 65000000, 1, 65, 2, 1, 1, 1, 1, 3, 4, 0, 0x0},
+ { 65000000, 81250000, 3, 325, 0, 3, 3, 1, 3, 3, 4, 0, 0x0},
+ { 68250000, 68250000, 1, 91, 0, 3, 3, 1, 2, 3, 4, 0, 0x0},
+ { 68250000, 85312500, 1, 142, 3, 1, 1, 25, 0, 1, 1, 0, 0x0},
+ { 71000000, 71000000, 1, 71, 2, 1, 1, 1, 1, 3, 4, 0, 0x0},
+ { 71000000, 88750000, 3, 355, 0, 3, 3, 1, 3, 3, 4, 0, 0x0},
+ { 72000000, 72000000, 1, 36, 2, 0, 0, 1, 1, 2, 2, 0, 0x0},
+ { 72000000, 90000000, 1, 60, 0, 2, 2, 1, 3, 2, 2, 0, 0x0},
+ { 73250000, 73250000, 3, 293, 0, 3, 3, 1, 2, 3, 4, 0, 0x0},
+ { 73250000, 91562500, 1, 61, 0, 2, 2, 1, 3, 2, 2, 0, 0x0},
+ { 74176000, 74176000, 1, 37, 2, 0, 0, 1, 1, 2, 2, 0, 0x16872b},
+ { 74176000, 92720000, 2, 185, 2, 1, 1, 15, 0, 1, 1, 0, 0x70a3d7},
+ { 74250000, 74250000, 1, 99, 0, 3, 3, 1, 2, 3, 4, 0, 0x0},
+ { 74250000, 92812500, 4, 495, 0, 3, 3, 1, 3, 3, 4, 0, 0x0},
+ { 75000000, 75000000, 1, 50, 0, 2, 2, 1, 0, 3, 4, 0, 0x0},
+ { 75000000, 93750000, 1, 125, 0, 3, 3, 1, 3, 3, 4, 0, 0x0},
+ { 78750000, 78750000, 1, 105, 0, 3, 3, 1, 2, 3, 4, 0, 0x0},
+ { 78750000, 98437500, 1, 164, 3, 1, 1, 25, 0, 1, 1, 0, 0x0},
+ { 79500000, 79500000, 1, 53, 0, 2, 2, 1, 0, 3, 4, 0, 0x0},
+ { 79500000, 99375000, 1, 199, 2, 2, 2, 15, 0, 2, 2, 0, 0x0},
+ { 83500000, 83500000, 2, 167, 2, 1, 1, 1, 1, 3, 4, 0, 0x0},
+ { 83500000, 104375000, 1, 104, 2, 1, 1, 15, 0, 1, 1, 0, 0x600000},
+ { 85500000, 85500000, 1, 57, 0, 2, 2, 1, 0, 3, 4, 0, 0x0},
+ { 85500000, 106875000, 1, 178, 3, 1, 1, 25, 0, 1, 1, 0, 0x0},
+ { 85750000, 85750000, 3, 343, 0, 3, 3, 1, 2, 3, 4, 0, 0x0},
+ { 85750000, 107187500, 1, 143, 0, 3, 3, 1, 3, 3, 4, 0, 0x0},
+ { 88750000, 88750000, 3, 355, 0, 3, 3, 1, 2, 3, 4, 0, 0x0},
+ { 88750000, 110937500, 1, 110, 2, 1, 1, 15, 0, 1, 1, 0, 0xf00000},
+ { 94500000, 94500000, 1, 63, 0, 2, 2, 1, 0, 3, 4, 0, 0x0},
+ { 94500000, 118125000, 1, 197, 3, 1, 1, 25, 0, 1, 1, 0, 0x0},
+ {101000000, 101000000, 1, 101, 2, 1, 1, 1, 1, 3, 4, 0, 0x0},
+ {101000000, 126250000, 1, 42, 0, 1, 1, 1, 3, 1, 1, 0, 0x0},
+ {102250000, 102250000, 4, 409, 2, 1, 1, 1, 1, 3, 4, 0, 0x0},
+ {102250000, 127812500, 1, 128, 2, 1, 1, 15, 0, 1, 1, 0, 0x0},
+ {106500000, 106500000, 1, 71, 0, 2, 2, 1, 0, 3, 4, 0, 0x0},
+ {106500000, 133125000, 1, 133, 2, 1, 1, 15, 0, 1, 1, 0, 0x0},
+ {108000000, 108000000, 1, 36, 0, 1, 1, 1, 0, 2, 2, 0, 0x0},
+ {108000000, 135000000, 1, 45, 0, 1, 1, 1, 3, 1, 1, 0, 0x0},
+ {115500000, 115500000, 1, 77, 0, 2, 2, 1, 0, 3, 4, 0, 0x0},
+ {115500000, 144375000, 1, 48, 0, 1, 1, 1, 3, 1, 1, 0, 0x0},
+ {117500000, 117500000, 2, 235, 2, 1, 1, 1, 1, 3, 4, 0, 0x0},
+ {117500000, 146875000, 1, 49, 0, 1, 1, 1, 3, 1, 1, 0, 0x0},
+ {119000000, 119000000, 1, 119, 2, 1, 1, 1, 1, 3, 4, 0, 0x0},
+ {119000000, 148750000, 3, 148, 0, 1, 1, 1, 3, 1, 1, 0, 0xc00000},
+ {121750000, 121750000, 4, 487, 2, 1, 1, 1, 1, 3, 4, 0, 0x0},
+ {121750000, 152187500, 1, 203, 0, 3, 3, 1, 3, 3, 4, 0, 0x0},
+ {122500000, 122500000, 2, 245, 2, 1, 1, 1, 1, 3, 4, 0, 0x0},
+ {122500000, 153125000, 1, 51, 0, 1, 1, 1, 3, 1, 1, 0, 0x0},
+ {135000000, 135000000, 1, 45, 0, 1, 1, 1, 0, 2, 2, 0, 0x0},
+ {135000000, 168750000, 1, 169, 2, 1, 1, 15, 0, 1, 1, 0, 0x0},
+ {136750000, 136750000, 1, 68, 2, 0, 0, 1, 1, 2, 2, 0, 0x600000},
+ {136750000, 170937500, 1, 113, 0, 2, 2, 1, 3, 2, 2, 0, 0xf5554f},
+ {140250000, 140250000, 2, 187, 0, 2, 2, 1, 0, 3, 4, 0, 0x0},
+ {140250000, 175312500, 1, 117, 0, 2, 2, 1, 3, 2, 2, 0, 0x0},
+ {146250000, 146250000, 2, 195, 0, 2, 2, 1, 0, 3, 4, 0, 0x0},
+ {146250000, 182812500, 1, 61, 0, 1, 1, 1, 3, 1, 1, 0, 0x0},
+ {148250000, 148250000, 3, 222, 2, 0, 0, 1, 1, 2, 2, 0, 0x600000},
+ {148250000, 185312500, 1, 123, 0, 2, 2, 1, 3, 2, 2, 0, 0x8aaab0},
+ {148352000, 148352000, 2, 148, 2, 0, 0, 1, 1, 2, 2, 0, 0x5a1cac},
+ {148352000, 185440000, 3, 185, 0, 1, 1, 1, 3, 1, 1, 0, 0x70a3d7},
+ {148500000, 148500000, 1, 99, 0, 2, 2, 1, 0, 3, 4, 0, 0x0},
+ {148500000, 185625000, 4, 495, 0, 2, 2, 1, 3, 2, 2, 0, 0x0},
+ {154000000, 154000000, 1, 77, 2, 0, 0, 1, 1, 2, 2, 0, 0x0},
+ {154000000, 192500000, 1, 64, 0, 1, 1, 1, 3, 1, 1, 0, 0x0},
+ {156000000, 156000000, 1, 52, 0, 1, 1, 1, 0, 2, 2, 0, 0x0},
+ {156000000, 195000000, 1, 65, 0, 1, 1, 1, 3, 1, 1, 0, 0x0},
+ {156750000, 156750000, 2, 209, 0, 2, 2, 1, 0, 3, 4, 0, 0x0},
+ {156750000, 195937500, 1, 196, 2, 1, 1, 15, 0, 1, 1, 0, 0x0},
+ {157000000, 157000000, 2, 157, 2, 0, 0, 1, 1, 2, 2, 0, 0x0},
+ {157000000, 196250000, 1, 131, 0, 2, 2, 1, 3, 2, 2, 0, 0x0},
+ {157500000, 157500000, 1, 105, 0, 2, 2, 1, 0, 3, 4, 0, 0x0},
+ {157500000, 196875000, 1, 197, 2, 1, 1, 15, 0, 1, 1, 0, 0x0},
+ {162000000, 162000000, 1, 54, 0, 1, 1, 1, 0, 2, 2, 0, 0x0},
+ {162000000, 202500000, 2, 135, 0, 1, 1, 1, 3, 1, 1, 0, 0x0},
+ {175500000, 175500000, 1, 117, 0, 2, 2, 1, 0, 3, 4, 0, 0x0},
+ {175500000, 219375000, 1, 73, 0, 1, 1, 1, 3, 1, 1, 0, 0x0},
+ {179500000, 179500000, 3, 359, 0, 2, 2, 1, 0, 3, 4, 0, 0x0},
+ {179500000, 224375000, 1, 75, 0, 1, 1, 1, 3, 1, 1, 0, 0x0},
+ {182750000, 182750000, 1, 91, 2, 0, 0, 1, 1, 2, 2, 0, 0x600000},
+ {182750000, 228437500, 1, 152, 0, 2, 2, 1, 3, 2, 2, 0, 0x4aaab0},
+ {182750000, 228437500, 1, 152, 0, 2, 2, 1, 3, 2, 2, 0, 0x4aaab0},
+ {187000000, 187000000, 2, 187, 2, 0, 0, 1, 1, 2, 2, 0, 0x0},
+ {187000000, 233750000, 1, 39, 0, 0, 0, 1, 3, 0, 0, 1, 0x0},
+ {187250000, 187250000, 3, 280, 2, 0, 0, 1, 1, 2, 2, 0, 0xe00000},
+ {187250000, 234062500, 1, 156, 0, 2, 2, 1, 3, 2, 2, 0, 0xaaab0},
+ {189000000, 189000000, 1, 63, 0, 1, 1, 1, 0, 2, 2, 0, 0x0},
+ {189000000, 236250000, 1, 79, 0, 1, 1, 1, 3, 1, 1, 0, 0x0},
+ {193250000, 193250000, 3, 289, 2, 0, 0, 1, 1, 2, 2, 0, 0xe00000},
+ {193250000, 241562500, 1, 161, 0, 2, 2, 1, 3, 2, 2, 0, 0xaaab0},
+ {202500000, 202500000, 2, 135, 0, 1, 1, 1, 0, 2, 2, 0, 0x0},
+ {202500000, 253125000, 1, 169, 0, 2, 2, 1, 3, 2, 2, 0, 0x0},
+ {204750000, 204750000, 4, 273, 0, 1, 1, 1, 0, 2, 2, 0, 0x0},
+ {204750000, 255937500, 1, 171, 0, 2, 2, 1, 3, 2, 2, 0, 0x0},
+ {208000000, 208000000, 1, 104, 2, 0, 0, 1, 1, 2, 2, 0, 0x0},
+ {208000000, 260000000, 1, 173, 0, 2, 2, 1, 3, 2, 2, 0, 0x0},
+ {214750000, 214750000, 1, 107, 2, 0, 0, 1, 1, 2, 2, 0, 0x600000},
+ {214750000, 268437500, 1, 178, 0, 2, 2, 1, 3, 2, 2, 0, 0xf5554f},
+ {218250000, 218250000, 4, 291, 0, 1, 1, 1, 0, 2, 2, 0, 0x0},
+ {218250000, 272812500, 1, 91, 0, 1, 1, 1, 3, 1, 1, 0, 0x0},
+ {229500000, 229500000, 2, 153, 0, 1, 1, 1, 0, 2, 2, 0, 0x0},
+ {229500000, 286875000, 1, 191, 0, 2, 2, 1, 3, 2, 2, 0, 0x0},
+ {234000000, 234000000, 1, 39, 0, 0, 0, 1, 0, 1, 1, 0, 0x0},
+ {234000000, 292500000, 1, 195, 0, 2, 2, 1, 3, 2, 2, 0, 0x0},
+ {241500000, 241500000, 2, 161, 0, 1, 1, 1, 0, 2, 2, 0, 0x0},
+ {241500000, 301875000, 1, 201, 0, 2, 2, 1, 3, 2, 2, 0, 0x0},
+ {245250000, 245250000, 4, 327, 0, 1, 1, 1, 0, 2, 2, 0, 0x0},
+ {245250000, 306562500, 1, 51, 0, 0, 0, 1, 3, 0, 0, 1, 0x0},
+ {245500000, 245500000, 4, 491, 2, 0, 0, 1, 1, 2, 2, 0, 0x0},
+ {245500000, 306875000, 1, 51, 0, 0, 0, 1, 3, 0, 0, 1, 0x0},
+ {261000000, 261000000, 1, 87, 0, 1, 1, 1, 0, 2, 2, 0, 0x0},
+ {261000000, 326250000, 1, 109, 0, 1, 1, 1, 3, 1, 1, 0, 0x0},
+ {268250000, 268250000, 9, 402, 0, 0, 0, 1, 0, 1, 1, 0, 0x600000},
+ {268250000, 335312500, 1, 111, 0, 1, 1, 1, 3, 1, 1, 0, 0xc5554f},
+ {268500000, 268500000, 2, 179, 0, 1, 1, 1, 0, 2, 2, 0, 0x0},
+ {268500000, 335625000, 1, 56, 0, 0, 0, 1, 3, 0, 0, 1, 0x0},
+ {281250000, 281250000, 4, 375, 0, 1, 1, 1, 0, 2, 2, 0, 0x0},
+ {281250000, 351562500, 1, 117, 0, 3, 1, 1, 3, 1, 1, 0, 0x0},
+ {288000000, 288000000, 1, 48, 0, 0, 0, 1, 0, 1, 1, 0, 0x0},
+ {288000000, 360000000, 1, 60, 0, 2, 0, 1, 3, 0, 0, 1, 0x0},
+ {296703000, 296703000, 1, 49, 0, 0, 0, 1, 0, 1, 1, 0, 0x7353f7},
+ {296703000, 370878750, 1, 123, 0, 3, 1, 1, 3, 1, 1, 0, 0xa051eb},
+ {297000000, 297000000, 1, 99, 0, 1, 1, 1, 0, 2, 2, 0, 0x0},
+ {297000000, 371250000, 4, 495, 0, 3, 1, 1, 3, 1, 1, 0, 0x0},
+ {312250000, 312250000, 9, 468, 0, 0, 0, 1, 0, 1, 1, 0, 0x600000},
+ {312250000, 390312500, 1, 130, 0, 3, 1, 1, 3, 1, 1, 0, 0x1aaab0},
+ {317000000, 317000000, 3, 317, 0, 1, 1, 1, 0, 2, 2, 0, 0x0},
+ {317000000, 396250000, 1, 66, 0, 2, 0, 1, 3, 0, 0, 1, 0x0},
+ {319750000, 319750000, 3, 159, 0, 0, 0, 1, 0, 1, 1, 0, 0xe00000},
+ {319750000, 399687500, 3, 199, 0, 2, 0, 1, 3, 0, 0, 1, 0xd80000},
+ {333250000, 333250000, 9, 499, 0, 0, 0, 1, 0, 1, 1, 0, 0xe00000},
+ {333250000, 416562500, 1, 138, 0, 3, 1, 1, 3, 1, 1, 0, 0xdaaab0},
+ {348500000, 348500000, 9, 522, 0, 2, 0, 1, 0, 1, 1, 0, 0xc00000},
+ {348500000, 435625000, 1, 145, 0, 3, 1, 1, 3, 1, 1, 0, 0x35554f},
+ {356500000, 356500000, 9, 534, 0, 2, 0, 1, 0, 1, 1, 0, 0xc00000},
+ {356500000, 445625000, 1, 148, 0, 3, 1, 1, 3, 1, 1, 0, 0x8aaab0},
+ {380500000, 380500000, 9, 570, 0, 2, 0, 1, 0, 1, 1, 0, 0xc00000},
+ {380500000, 475625000, 1, 158, 0, 3, 1, 1, 3, 1, 1, 0, 0x8aaab0},
+ {443250000, 443250000, 1, 73, 0, 2, 0, 1, 0, 1, 1, 0, 0xe00000},
+ {443250000, 554062500, 1, 92, 0, 2, 0, 1, 3, 0, 0, 1, 0x580000},
+ {505250000, 505250000, 9, 757, 0, 2, 0, 1, 0, 1, 1, 0, 0xe00000},
+ {552750000, 552750000, 3, 276, 0, 2, 0, 1, 0, 1, 1, 0, 0x600000},
+ {593407000, 296703500, 3, 296, 0, 1, 1, 1, 0, 1, 1, 0, 0xb41893},
+ {593407000, 370879375, 4, 494, 0, 3, 1, 1, 3, 0, 0, 1, 0x817e4a},
+ {593407000, 593407000, 3, 296, 0, 2, 0, 1, 0, 1, 1, 0, 0xb41893},
+ {594000000, 297000000, 1, 99, 0, 1, 1, 1, 0, 1, 1, 0, 0x0},
+ {594000000, 371250000, 4, 495, 0, 3, 1, 1, 3, 0, 0, 1, 0x0},
+ {594000000, 594000000, 1, 99, 0, 2, 0, 1, 0, 1, 1, 0, 0x0},
+ { /* sentinel */ }
+};
+
+static const struct post_pll_config post_pll_cfg_table[] = {
+ {33750000, 1, 40, 8, 1},
+ {33750000, 1, 80, 8, 2},
+ {74250000, 1, 40, 8, 1},
+ {74250000, 18, 80, 8, 2},
+ {148500000, 2, 40, 4, 3},
+ {297000000, 4, 40, 2, 3},
+ {594000000, 8, 40, 1, 3},
+ { /* sentinel */ }
+};
+
+/* phy tuning values for an undocumented set of registers */
+static const struct phy_config rk3228_phy_cfg[] = {
+ { 165000000, {
+ 0xaa, 0x00, 0x44, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00,
+ },
+ }, {
+ 340000000, {
+ 0xaa, 0x15, 0x6a, 0xaa, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00,
+ },
+ }, {
+ 594000000, {
+ 0xaa, 0x15, 0x7a, 0xaa, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00,
+ },
+ }, { /* sentinel */ },
+};
+
+/* phy tuning values for an undocumented set of registers */
+static const struct phy_config rk3328_phy_cfg[] = {
+ { 165000000, {
+ 0x07, 0x0a, 0x0a, 0x0a, 0x00, 0x00, 0x08, 0x08, 0x08,
+ 0x00, 0xac, 0xcc, 0xcc, 0xcc,
+ },
+ }, {
+ 340000000, {
+ 0x0b, 0x0d, 0x0d, 0x0d, 0x07, 0x15, 0x08, 0x08, 0x08,
+ 0x3f, 0xac, 0xcc, 0xcd, 0xdd,
+ },
+ }, {
+ 594000000, {
+ 0x10, 0x1a, 0x1a, 0x1a, 0x07, 0x15, 0x08, 0x08, 0x08,
+ 0x00, 0xac, 0xcc, 0xcc, 0xcc,
+ },
+ }, { /* sentinel */ },
+};
+
+static inline struct inno_hdmi_phy *to_inno_hdmi_phy(struct clk_hw *hw)
+{
+ return container_of(hw, struct inno_hdmi_phy, hw);
+}
+
+/*
+ * The register description of the IP block does not use any distinct names
+ * but instead the databook simply numbers the registers in one-increments.
+ * As the registers are obviously 32bit sized, the inno_* functions
+ * translate the databook register names to the actual registers addresses.
+ */
+static inline void inno_write(struct inno_hdmi_phy *inno, u32 reg, u8 val)
+{
+ regmap_write(inno->regmap, reg * 4, val);
+}
+
+static inline u8 inno_read(struct inno_hdmi_phy *inno, u32 reg)
+{
+ u32 val;
+
+ regmap_read(inno->regmap, reg * 4, &val);
+
+ return val;
+}
+
+static inline void inno_update_bits(struct inno_hdmi_phy *inno, u8 reg,
+ u8 mask, u8 val)
+{
+ regmap_update_bits(inno->regmap, reg * 4, mask, val);
+}
+
+#define inno_poll(inno, reg, val, cond, sleep_us, timeout_us) \
+ regmap_read_poll_timeout((inno)->regmap, (reg) * 4, val, cond, \
+ sleep_us, timeout_us)
+
+static unsigned long inno_hdmi_phy_get_tmdsclk(struct inno_hdmi_phy *inno,
+ unsigned long rate)
+{
+ int bus_width = phy_get_bus_width(inno->phy);
+
+ switch (bus_width) {
+ case 4:
+ case 5:
+ case 6:
+ case 10:
+ case 12:
+ case 16:
+ return (u64)rate * bus_width / 8;
+ default:
+ return rate;
+ }
+}
+
+static irqreturn_t inno_hdmi_phy_rk3328_hardirq(int irq, void *dev_id)
+{
+ struct inno_hdmi_phy *inno = dev_id;
+ int intr_stat1, intr_stat2, intr_stat3;
+
+ intr_stat1 = inno_read(inno, 0x04);
+ intr_stat2 = inno_read(inno, 0x06);
+ intr_stat3 = inno_read(inno, 0x08);
+
+ if (intr_stat1)
+ inno_write(inno, 0x04, intr_stat1);
+ if (intr_stat2)
+ inno_write(inno, 0x06, intr_stat2);
+ if (intr_stat3)
+ inno_write(inno, 0x08, intr_stat3);
+
+ if (intr_stat1 || intr_stat2 || intr_stat3)
+ return IRQ_WAKE_THREAD;
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t inno_hdmi_phy_rk3328_irq(int irq, void *dev_id)
+{
+ struct inno_hdmi_phy *inno = dev_id;
+
+ inno_update_bits(inno, 0x02, RK3328_PDATA_EN, 0);
+ usleep_range(10, 20);
+ inno_update_bits(inno, 0x02, RK3328_PDATA_EN, RK3328_PDATA_EN);
+
+ return IRQ_HANDLED;
+}
+
+static int inno_hdmi_phy_power_on(struct phy *phy)
+{
+ struct inno_hdmi_phy *inno = phy_get_drvdata(phy);
+ const struct post_pll_config *cfg = post_pll_cfg_table;
+ const struct phy_config *phy_cfg = inno->plat_data->phy_cfg_table;
+ unsigned long tmdsclock = inno_hdmi_phy_get_tmdsclk(inno,
+ inno->pixclock);
+ int ret;
+
+ if (!tmdsclock) {
+ dev_err(inno->dev, "TMDS clock is zero!\n");
+ return -EINVAL;
+ }
+
+ if (!inno->plat_data->ops->power_on)
+ return -EINVAL;
+
+ for (; cfg->tmdsclock != 0; cfg++)
+ if (tmdsclock <= cfg->tmdsclock &&
+ cfg->version & inno->chip_version)
+ break;
+
+ for (; phy_cfg->tmdsclock != 0; phy_cfg++)
+ if (tmdsclock <= phy_cfg->tmdsclock)
+ break;
+
+ if (cfg->tmdsclock == 0 || phy_cfg->tmdsclock == 0)
+ return -EINVAL;
+
+ dev_dbg(inno->dev, "Inno HDMI PHY Power On\n");
+
+ inno->plat_data->clk_ops->set_rate(&inno->hw, inno->pixclock, 24000000);
+
+ ret = clk_prepare_enable(inno->phyclk);
+ if (ret)
+ return ret;
+
+ ret = inno->plat_data->ops->power_on(inno, cfg, phy_cfg);
+ if (ret) {
+ clk_disable_unprepare(inno->phyclk);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int inno_hdmi_phy_power_off(struct phy *phy)
+{
+ struct inno_hdmi_phy *inno = phy_get_drvdata(phy);
+
+ if (!inno->plat_data->ops->power_off)
+ return -EINVAL;
+
+ inno->plat_data->ops->power_off(inno);
+
+ clk_disable_unprepare(inno->phyclk);
+
+ inno->tmdsclock = 0;
+
+ dev_dbg(inno->dev, "Inno HDMI PHY Power Off\n");
+
+ return 0;
+}
+
+static const struct phy_ops inno_hdmi_phy_ops = {
+ .owner = THIS_MODULE,
+ .power_on = inno_hdmi_phy_power_on,
+ .power_off = inno_hdmi_phy_power_off,
+};
+
+static const
+struct pre_pll_config *inno_hdmi_phy_get_pre_pll_cfg(struct inno_hdmi_phy *inno,
+ unsigned long rate)
+{
+ const struct pre_pll_config *cfg = pre_pll_cfg_table;
+ unsigned long tmdsclock = inno_hdmi_phy_get_tmdsclk(inno, rate);
+
+ for (; cfg->pixclock != 0; cfg++)
+ if (cfg->pixclock == rate && cfg->tmdsclock == tmdsclock)
+ break;
+
+ if (cfg->pixclock == 0)
+ return ERR_PTR(-EINVAL);
+
+ return cfg;
+}
+
+static int inno_hdmi_phy_rk3228_clk_is_prepared(struct clk_hw *hw)
+{
+ struct inno_hdmi_phy *inno = to_inno_hdmi_phy(hw);
+ u8 status;
+
+ status = inno_read(inno, 0xe0) & RK3228_PRE_PLL_POWER_DOWN;
+ return status ? 0 : 1;
+}
+
+static int inno_hdmi_phy_rk3228_clk_prepare(struct clk_hw *hw)
+{
+ struct inno_hdmi_phy *inno = to_inno_hdmi_phy(hw);
+
+ inno_update_bits(inno, 0xe0, RK3228_PRE_PLL_POWER_DOWN, 0);
+ return 0;
+}
+
+static void inno_hdmi_phy_rk3228_clk_unprepare(struct clk_hw *hw)
+{
+ struct inno_hdmi_phy *inno = to_inno_hdmi_phy(hw);
+
+ inno_update_bits(inno, 0xe0, RK3228_PRE_PLL_POWER_DOWN,
+ RK3228_PRE_PLL_POWER_DOWN);
+}
+
+static
+unsigned long inno_hdmi_phy_rk3228_clk_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct inno_hdmi_phy *inno = to_inno_hdmi_phy(hw);
+ u8 nd, no_a, no_b, no_d;
+ u64 vco;
+ u16 nf;
+
+ nd = inno_read(inno, 0xe2) & RK3228_PRE_PLL_PRE_DIV_MASK;
+ nf = (inno_read(inno, 0xe2) & RK3228_PRE_PLL_FB_DIV_8_MASK) << 1;
+ nf |= inno_read(inno, 0xe3);
+ vco = parent_rate * nf;
+
+ if (inno_read(inno, 0xe2) & RK3228_PCLK_VCO_DIV_5_MASK) {
+ do_div(vco, nd * 5);
+ } else {
+ no_a = inno_read(inno, 0xe4) & RK3228_PRE_PLL_PCLK_DIV_A_MASK;
+ if (!no_a)
+ no_a = 1;
+ no_b = inno_read(inno, 0xe4) & RK3228_PRE_PLL_PCLK_DIV_B_MASK;
+ no_b >>= RK3228_PRE_PLL_PCLK_DIV_B_SHIFT;
+ no_b += 2;
+ no_d = inno_read(inno, 0xe5) & RK3228_PRE_PLL_PCLK_DIV_D_MASK;
+
+ do_div(vco, (nd * (no_a == 1 ? no_b : no_a) * no_d * 2));
+ }
+
+ inno->pixclock = vco;
+
+ dev_dbg(inno->dev, "%s rate %lu\n", __func__, inno->pixclock);
+
+ return vco;
+}
+
+static long inno_hdmi_phy_rk3228_clk_round_rate(struct clk_hw *hw,
+ unsigned long rate,
+ unsigned long *parent_rate)
+{
+ const struct pre_pll_config *cfg = pre_pll_cfg_table;
+
+ rate = (rate / 1000) * 1000;
+
+ for (; cfg->pixclock != 0; cfg++)
+ if (cfg->pixclock == rate && !cfg->fracdiv)
+ break;
+
+ if (cfg->pixclock == 0)
+ return -EINVAL;
+
+ return cfg->pixclock;
+}
+
+static int inno_hdmi_phy_rk3228_clk_set_rate(struct clk_hw *hw,
+ unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct inno_hdmi_phy *inno = to_inno_hdmi_phy(hw);
+ const struct pre_pll_config *cfg;
+ unsigned long tmdsclock = inno_hdmi_phy_get_tmdsclk(inno, rate);
+ u32 v;
+ int ret;
+
+ dev_dbg(inno->dev, "%s rate %lu tmdsclk %lu\n",
+ __func__, rate, tmdsclock);
+
+ if (inno->pixclock == rate && inno->tmdsclock == tmdsclock)
+ return 0;
+
+ cfg = inno_hdmi_phy_get_pre_pll_cfg(inno, rate);
+ if (IS_ERR(cfg))
+ return PTR_ERR(cfg);
+
+ /* Power down PRE-PLL */
+ inno_update_bits(inno, 0xe0, RK3228_PRE_PLL_POWER_DOWN,
+ RK3228_PRE_PLL_POWER_DOWN);
+
+ inno_update_bits(inno, 0xe2, RK3228_PRE_PLL_FB_DIV_8_MASK |
+ RK3228_PCLK_VCO_DIV_5_MASK |
+ RK3228_PRE_PLL_PRE_DIV_MASK,
+ RK3228_PRE_PLL_FB_DIV_8(cfg->fbdiv) |
+ RK3228_PCLK_VCO_DIV_5(cfg->vco_div_5_en) |
+ RK3228_PRE_PLL_PRE_DIV(cfg->prediv));
+ inno_write(inno, 0xe3, RK3228_PRE_PLL_FB_DIV_7_0(cfg->fbdiv));
+ inno_update_bits(inno, 0xe4, RK3228_PRE_PLL_PCLK_DIV_B_MASK |
+ RK3228_PRE_PLL_PCLK_DIV_A_MASK,
+ RK3228_PRE_PLL_PCLK_DIV_B(cfg->pclk_div_b) |
+ RK3228_PRE_PLL_PCLK_DIV_A(cfg->pclk_div_a));
+ inno_update_bits(inno, 0xe5, RK3228_PRE_PLL_PCLK_DIV_C_MASK |
+ RK3228_PRE_PLL_PCLK_DIV_D_MASK,
+ RK3228_PRE_PLL_PCLK_DIV_C(cfg->pclk_div_c) |
+ RK3228_PRE_PLL_PCLK_DIV_D(cfg->pclk_div_d));
+ inno_update_bits(inno, 0xe6, RK3228_PRE_PLL_TMDSCLK_DIV_C_MASK |
+ RK3228_PRE_PLL_TMDSCLK_DIV_A_MASK |
+ RK3228_PRE_PLL_TMDSCLK_DIV_B_MASK,
+ RK3228_PRE_PLL_TMDSCLK_DIV_C(cfg->tmds_div_c) |
+ RK3228_PRE_PLL_TMDSCLK_DIV_A(cfg->tmds_div_a) |
+ RK3228_PRE_PLL_TMDSCLK_DIV_B(cfg->tmds_div_b));
+
+ /* Power up PRE-PLL */
+ inno_update_bits(inno, 0xe0, RK3228_PRE_PLL_POWER_DOWN, 0);
+
+ /* Wait for Pre-PLL lock */
+ ret = inno_poll(inno, 0xe8, v, v & RK3228_PRE_PLL_LOCK_STATUS,
+ 100, 100000);
+ if (ret) {
+ dev_err(inno->dev, "Pre-PLL locking failed\n");
+ return ret;
+ }
+
+ inno->pixclock = rate;
+ inno->tmdsclock = tmdsclock;
+
+ return 0;
+}
+
+static const struct clk_ops inno_hdmi_phy_rk3228_clk_ops = {
+ .prepare = inno_hdmi_phy_rk3228_clk_prepare,
+ .unprepare = inno_hdmi_phy_rk3228_clk_unprepare,
+ .is_prepared = inno_hdmi_phy_rk3228_clk_is_prepared,
+ .recalc_rate = inno_hdmi_phy_rk3228_clk_recalc_rate,
+ .round_rate = inno_hdmi_phy_rk3228_clk_round_rate,
+ .set_rate = inno_hdmi_phy_rk3228_clk_set_rate,
+};
+
+static int inno_hdmi_phy_rk3328_clk_is_prepared(struct clk_hw *hw)
+{
+ struct inno_hdmi_phy *inno = to_inno_hdmi_phy(hw);
+ u8 status;
+
+ status = inno_read(inno, 0xa0) & RK3328_PRE_PLL_POWER_DOWN;
+ return status ? 0 : 1;
+}
+
+static int inno_hdmi_phy_rk3328_clk_prepare(struct clk_hw *hw)
+{
+ struct inno_hdmi_phy *inno = to_inno_hdmi_phy(hw);
+
+ inno_update_bits(inno, 0xa0, RK3328_PRE_PLL_POWER_DOWN, 0);
+ return 0;
+}
+
+static void inno_hdmi_phy_rk3328_clk_unprepare(struct clk_hw *hw)
+{
+ struct inno_hdmi_phy *inno = to_inno_hdmi_phy(hw);
+
+ inno_update_bits(inno, 0xa0, RK3328_PRE_PLL_POWER_DOWN,
+ RK3328_PRE_PLL_POWER_DOWN);
+}
+
+static
+unsigned long inno_hdmi_phy_rk3328_clk_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct inno_hdmi_phy *inno = to_inno_hdmi_phy(hw);
+ unsigned long frac;
+ u8 nd, no_a, no_b, no_d;
+ u64 vco;
+ u16 nf;
+
+ nd = inno_read(inno, 0xa1) & RK3328_PRE_PLL_PRE_DIV_MASK;
+ nf = ((inno_read(inno, 0xa2) & RK3328_PRE_PLL_FB_DIV_11_8_MASK) << 8);
+ nf |= inno_read(inno, 0xa3);
+ vco = parent_rate * nf;
+
+ if (!(inno_read(inno, 0xa2) & RK3328_PRE_PLL_FRAC_DIV_DISABLE)) {
+ frac = inno_read(inno, 0xd3) |
+ (inno_read(inno, 0xd2) << 8) |
+ (inno_read(inno, 0xd1) << 16);
+ vco += DIV_ROUND_CLOSEST(parent_rate * frac, (1 << 24));
+ }
+
+ if (inno_read(inno, 0xa0) & RK3328_PCLK_VCO_DIV_5_MASK) {
+ do_div(vco, nd * 5);
+ } else {
+ no_a = inno_read(inno, 0xa5) & RK3328_PRE_PLL_PCLK_DIV_A_MASK;
+ no_b = inno_read(inno, 0xa5) & RK3328_PRE_PLL_PCLK_DIV_B_MASK;
+ no_b >>= RK3328_PRE_PLL_PCLK_DIV_B_SHIFT;
+ no_b += 2;
+ no_d = inno_read(inno, 0xa6) & RK3328_PRE_PLL_PCLK_DIV_D_MASK;
+
+ do_div(vco, (nd * (no_a == 1 ? no_b : no_a) * no_d * 2));
+ }
+
+ inno->pixclock = DIV_ROUND_CLOSEST((unsigned long)vco, 1000) * 1000;
+
+ dev_dbg(inno->dev, "%s rate %lu vco %llu\n",
+ __func__, inno->pixclock, vco);
+
+ return inno->pixclock;
+}
+
+static long inno_hdmi_phy_rk3328_clk_round_rate(struct clk_hw *hw,
+ unsigned long rate,
+ unsigned long *parent_rate)
+{
+ const struct pre_pll_config *cfg = pre_pll_cfg_table;
+
+ rate = (rate / 1000) * 1000;
+
+ for (; cfg->pixclock != 0; cfg++)
+ if (cfg->pixclock == rate)
+ break;
+
+ if (cfg->pixclock == 0)
+ return -EINVAL;
+
+ return cfg->pixclock;
+}
+
+static int inno_hdmi_phy_rk3328_clk_set_rate(struct clk_hw *hw,
+ unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct inno_hdmi_phy *inno = to_inno_hdmi_phy(hw);
+ const struct pre_pll_config *cfg;
+ unsigned long tmdsclock = inno_hdmi_phy_get_tmdsclk(inno, rate);
+ u32 val;
+ int ret;
+
+ dev_dbg(inno->dev, "%s rate %lu tmdsclk %lu\n",
+ __func__, rate, tmdsclock);
+
+ if (inno->pixclock == rate && inno->tmdsclock == tmdsclock)
+ return 0;
+
+ cfg = inno_hdmi_phy_get_pre_pll_cfg(inno, rate);
+ if (IS_ERR(cfg))
+ return PTR_ERR(cfg);
+
+ inno_update_bits(inno, 0xa0, RK3328_PRE_PLL_POWER_DOWN,
+ RK3328_PRE_PLL_POWER_DOWN);
+
+ /* Configure pre-pll */
+ inno_update_bits(inno, 0xa0, RK3328_PCLK_VCO_DIV_5_MASK,
+ RK3328_PCLK_VCO_DIV_5(cfg->vco_div_5_en));
+ inno_write(inno, 0xa1, RK3328_PRE_PLL_PRE_DIV(cfg->prediv));
+
+ val = RK3328_SPREAD_SPECTRUM_MOD_DISABLE;
+ if (!cfg->fracdiv)
+ val |= RK3328_PRE_PLL_FRAC_DIV_DISABLE;
+ inno_write(inno, 0xa2, RK3328_PRE_PLL_FB_DIV_11_8(cfg->fbdiv) | val);
+ inno_write(inno, 0xa3, RK3328_PRE_PLL_FB_DIV_7_0(cfg->fbdiv));
+ inno_write(inno, 0xa5, RK3328_PRE_PLL_PCLK_DIV_A(cfg->pclk_div_a) |
+ RK3328_PRE_PLL_PCLK_DIV_B(cfg->pclk_div_b));
+ inno_write(inno, 0xa6, RK3328_PRE_PLL_PCLK_DIV_C(cfg->pclk_div_c) |
+ RK3328_PRE_PLL_PCLK_DIV_D(cfg->pclk_div_d));
+ inno_write(inno, 0xa4, RK3328_PRE_PLL_TMDSCLK_DIV_C(cfg->tmds_div_c) |
+ RK3328_PRE_PLL_TMDSCLK_DIV_A(cfg->tmds_div_a) |
+ RK3328_PRE_PLL_TMDSCLK_DIV_B(cfg->tmds_div_b));
+ inno_write(inno, 0xd3, RK3328_PRE_PLL_FRAC_DIV_7_0(cfg->fracdiv));
+ inno_write(inno, 0xd2, RK3328_PRE_PLL_FRAC_DIV_15_8(cfg->fracdiv));
+ inno_write(inno, 0xd1, RK3328_PRE_PLL_FRAC_DIV_23_16(cfg->fracdiv));
+
+ inno_update_bits(inno, 0xa0, RK3328_PRE_PLL_POWER_DOWN, 0);
+
+ /* Wait for Pre-PLL lock */
+ ret = inno_poll(inno, 0xa9, val, val & RK3328_PRE_PLL_LOCK_STATUS,
+ 1000, 10000);
+ if (ret) {
+ dev_err(inno->dev, "Pre-PLL locking failed\n");
+ return ret;
+ }
+
+ inno->pixclock = rate;
+ inno->tmdsclock = tmdsclock;
+
+ return 0;
+}
+
+static const struct clk_ops inno_hdmi_phy_rk3328_clk_ops = {
+ .prepare = inno_hdmi_phy_rk3328_clk_prepare,
+ .unprepare = inno_hdmi_phy_rk3328_clk_unprepare,
+ .is_prepared = inno_hdmi_phy_rk3328_clk_is_prepared,
+ .recalc_rate = inno_hdmi_phy_rk3328_clk_recalc_rate,
+ .round_rate = inno_hdmi_phy_rk3328_clk_round_rate,
+ .set_rate = inno_hdmi_phy_rk3328_clk_set_rate,
+};
+
+static int inno_hdmi_phy_clk_register(struct inno_hdmi_phy *inno)
+{
+ struct device *dev = inno->dev;
+ struct device_node *np = dev->of_node;
+ struct clk_init_data init;
+ const char *parent_name;
+ int ret;
+
+ parent_name = __clk_get_name(inno->refoclk);
+
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+ init.flags = 0;
+ init.name = "pin_hd20_pclk";
+ init.ops = inno->plat_data->clk_ops;
+
+ /* optional override of the clock name */
+ of_property_read_string(np, "clock-output-names", &init.name);
+
+ inno->hw.init = &init;
+
+ inno->phyclk = devm_clk_register(dev, &inno->hw);
+ if (IS_ERR(inno->phyclk)) {
+ ret = PTR_ERR(inno->phyclk);
+ dev_err(dev, "failed to register clock: %d\n", ret);
+ return ret;
+ }
+
+ ret = of_clk_add_provider(np, of_clk_src_simple_get, inno->phyclk);
+ if (ret) {
+ dev_err(dev, "failed to register clock provider: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int inno_hdmi_phy_rk3228_init(struct inno_hdmi_phy *inno)
+{
+ /*
+ * Use phy internal register control
+ * rxsense/poweron/pllpd/pdataen signal.
+ */
+ inno_write(inno, 0x01, RK3228_BYPASS_RXSENSE_EN |
+ RK3228_BYPASS_PWRON_EN |
+ RK3228_BYPASS_PLLPD_EN);
+ inno_update_bits(inno, 0x02, RK3228_BYPASS_PDATA_EN,
+ RK3228_BYPASS_PDATA_EN);
+
+ /* manual power down post-PLL */
+ inno_update_bits(inno, 0xaa, RK3228_POST_PLL_CTRL_MANUAL,
+ RK3228_POST_PLL_CTRL_MANUAL);
+
+ inno->chip_version = 1;
+
+ return 0;
+}
+
+static int
+inno_hdmi_phy_rk3228_power_on(struct inno_hdmi_phy *inno,
+ const struct post_pll_config *cfg,
+ const struct phy_config *phy_cfg)
+{
+ int ret;
+ u32 v;
+
+ inno_update_bits(inno, 0x02, RK3228_PDATAEN_DISABLE,
+ RK3228_PDATAEN_DISABLE);
+ inno_update_bits(inno, 0xe0, RK3228_PRE_PLL_POWER_DOWN |
+ RK3228_POST_PLL_POWER_DOWN,
+ RK3228_PRE_PLL_POWER_DOWN |
+ RK3228_POST_PLL_POWER_DOWN);
+
+ /* Post-PLL update */
+ inno_update_bits(inno, 0xe9, RK3228_POST_PLL_PRE_DIV_MASK,
+ RK3228_POST_PLL_PRE_DIV(cfg->prediv));
+ inno_update_bits(inno, 0xeb, RK3228_POST_PLL_FB_DIV_8_MASK,
+ RK3228_POST_PLL_FB_DIV_8(cfg->fbdiv));
+ inno_write(inno, 0xea, RK3228_POST_PLL_FB_DIV_7_0(cfg->fbdiv));
+
+ if (cfg->postdiv == 1) {
+ inno_update_bits(inno, 0xe9, RK3228_POST_PLL_POST_DIV_ENABLE,
+ 0);
+ } else {
+ int div = cfg->postdiv / 2 - 1;
+
+ inno_update_bits(inno, 0xe9, RK3228_POST_PLL_POST_DIV_ENABLE,
+ RK3228_POST_PLL_POST_DIV_ENABLE);
+ inno_update_bits(inno, 0xeb, RK3228_POST_PLL_POST_DIV_MASK,
+ RK3228_POST_PLL_POST_DIV(div));
+ }
+
+ for (v = 0; v < 4; v++)
+ inno_write(inno, 0xef + v, phy_cfg->regs[v]);
+
+ inno_update_bits(inno, 0xe0, RK3228_PRE_PLL_POWER_DOWN |
+ RK3228_POST_PLL_POWER_DOWN, 0);
+ inno_update_bits(inno, 0xe1, RK3228_BANDGAP_ENABLE,
+ RK3228_BANDGAP_ENABLE);
+ inno_update_bits(inno, 0xe1, RK3228_TMDS_DRIVER_ENABLE,
+ RK3228_TMDS_DRIVER_ENABLE);
+
+ /* Wait for post PLL lock */
+ ret = inno_poll(inno, 0xeb, v, v & RK3228_POST_PLL_LOCK_STATUS,
+ 100, 100000);
+ if (ret) {
+ dev_err(inno->dev, "Post-PLL locking failed\n");
+ return ret;
+ }
+
+ if (cfg->tmdsclock > 340000000)
+ msleep(100);
+
+ inno_update_bits(inno, 0x02, RK3228_PDATAEN_DISABLE, 0);
+ return 0;
+}
+
+static void inno_hdmi_phy_rk3228_power_off(struct inno_hdmi_phy *inno)
+{
+ inno_update_bits(inno, 0xe1, RK3228_TMDS_DRIVER_ENABLE, 0);
+ inno_update_bits(inno, 0xe1, RK3228_BANDGAP_ENABLE, 0);
+ inno_update_bits(inno, 0xe0, RK3228_POST_PLL_POWER_DOWN,
+ RK3228_POST_PLL_POWER_DOWN);
+}
+
+static const struct inno_hdmi_phy_ops rk3228_hdmi_phy_ops = {
+ .init = inno_hdmi_phy_rk3228_init,
+ .power_on = inno_hdmi_phy_rk3228_power_on,
+ .power_off = inno_hdmi_phy_rk3228_power_off,
+};
+
+static int inno_hdmi_phy_rk3328_init(struct inno_hdmi_phy *inno)
+{
+ struct nvmem_cell *cell;
+ unsigned char *efuse_buf;
+ size_t len;
+
+ /*
+ * Use phy internal register control
+ * rxsense/poweron/pllpd/pdataen signal.
+ */
+ inno_write(inno, 0x01, RK3328_BYPASS_RXSENSE_EN |
+ RK3328_BYPASS_POWERON_EN |
+ RK3328_BYPASS_PLLPD_EN);
+ inno_write(inno, 0x02, RK3328_INT_POL_HIGH | RK3328_BYPASS_PDATA_EN |
+ RK3328_PDATA_EN);
+
+ /* Disable phy irq */
+ inno_write(inno, 0x05, 0);
+ inno_write(inno, 0x07, 0);
+
+ /* try to read the chip-version */
+ inno->chip_version = 1;
+ cell = nvmem_cell_get(inno->dev, "cpu-version");
+ if (IS_ERR(cell)) {
+ if (PTR_ERR(cell) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+
+ return 0;
+ }
+
+ efuse_buf = nvmem_cell_read(cell, &len);
+ nvmem_cell_put(cell);
+
+ if (IS_ERR(efuse_buf))
+ return 0;
+ if (len == 1)
+ inno->chip_version = efuse_buf[0] + 1;
+ kfree(efuse_buf);
+
+ return 0;
+}
+
+static int
+inno_hdmi_phy_rk3328_power_on(struct inno_hdmi_phy *inno,
+ const struct post_pll_config *cfg,
+ const struct phy_config *phy_cfg)
+{
+ int ret;
+ u32 v;
+
+ inno_update_bits(inno, 0x02, RK3328_PDATA_EN, 0);
+ inno_update_bits(inno, 0xaa, RK3328_POST_PLL_POWER_DOWN,
+ RK3328_POST_PLL_POWER_DOWN);
+
+ inno_write(inno, 0xac, RK3328_POST_PLL_FB_DIV_7_0(cfg->fbdiv));
+ if (cfg->postdiv == 1) {
+ inno_write(inno, 0xab, RK3328_POST_PLL_FB_DIV_8(cfg->fbdiv) |
+ RK3328_POST_PLL_PRE_DIV(cfg->prediv));
+ inno_write(inno, 0xaa, RK3328_POST_PLL_REFCLK_SEL_TMDS |
+ RK3328_POST_PLL_POWER_DOWN);
+ } else {
+ v = (cfg->postdiv / 2) - 1;
+ v &= RK3328_POST_PLL_POST_DIV_MASK;
+ inno_write(inno, 0xad, v);
+ inno_write(inno, 0xab, RK3328_POST_PLL_FB_DIV_8(cfg->fbdiv) |
+ RK3328_POST_PLL_PRE_DIV(cfg->prediv));
+ inno_write(inno, 0xaa, RK3328_POST_PLL_POST_DIV_ENABLE |
+ RK3328_POST_PLL_REFCLK_SEL_TMDS |
+ RK3328_POST_PLL_POWER_DOWN);
+ }
+
+ for (v = 0; v < 14; v++)
+ inno_write(inno, 0xb5 + v, phy_cfg->regs[v]);
+
+ /* set ESD detection threshold for TMDS CLK, D2, D1 and D0 */
+ for (v = 0; v < 4; v++)
+ inno_update_bits(inno, 0xc8 + v, RK3328_ESD_DETECT_MASK,
+ RK3328_ESD_DETECT_340MV);
+
+ if (phy_cfg->tmdsclock > 340000000) {
+ /* Set termination resistor to 100ohm */
+ v = clk_get_rate(inno->sysclk) / 100000;
+ inno_write(inno, 0xc5, RK3328_TERM_RESISTOR_CALIB_SPEED_14_8(v)
+ | RK3328_BYPASS_TERM_RESISTOR_CALIB);
+ inno_write(inno, 0xc6, RK3328_TERM_RESISTOR_CALIB_SPEED_7_0(v));
+ inno_write(inno, 0xc7, RK3328_TERM_RESISTOR_100);
+ inno_update_bits(inno, 0xc5,
+ RK3328_BYPASS_TERM_RESISTOR_CALIB, 0);
+ } else {
+ inno_write(inno, 0xc5, RK3328_BYPASS_TERM_RESISTOR_CALIB);
+
+ /* clk termination resistor is 50ohm (parallel resistors) */
+ if (phy_cfg->tmdsclock > 165000000)
+ inno_update_bits(inno, 0xc8,
+ RK3328_TMDS_TERM_RESIST_MASK,
+ RK3328_TMDS_TERM_RESIST_75 |
+ RK3328_TMDS_TERM_RESIST_150);
+
+ /* data termination resistor for D2, D1 and D0 is 150ohm */
+ for (v = 0; v < 3; v++)
+ inno_update_bits(inno, 0xc9 + v,
+ RK3328_TMDS_TERM_RESIST_MASK,
+ RK3328_TMDS_TERM_RESIST_150);
+ }
+
+ inno_update_bits(inno, 0xaa, RK3328_POST_PLL_POWER_DOWN, 0);
+ inno_update_bits(inno, 0xb0, RK3328_BANDGAP_ENABLE,
+ RK3328_BANDGAP_ENABLE);
+ inno_update_bits(inno, 0xb2, RK3328_TMDS_DRIVER_ENABLE,
+ RK3328_TMDS_DRIVER_ENABLE);
+
+ /* Wait for post PLL lock */
+ ret = inno_poll(inno, 0xaf, v, v & RK3328_POST_PLL_LOCK_STATUS,
+ 1000, 10000);
+ if (ret) {
+ dev_err(inno->dev, "Post-PLL locking failed\n");
+ return ret;
+ }
+
+ if (phy_cfg->tmdsclock > 340000000)
+ msleep(100);
+
+ inno_update_bits(inno, 0x02, RK3328_PDATA_EN, RK3328_PDATA_EN);
+
+ /* Enable PHY IRQ */
+ inno_write(inno, 0x05, RK3328_INT_TMDS_CLK(RK3328_INT_VSS_AGND_ESD_DET)
+ | RK3328_INT_TMDS_D2(RK3328_INT_VSS_AGND_ESD_DET));
+ inno_write(inno, 0x07, RK3328_INT_TMDS_D1(RK3328_INT_VSS_AGND_ESD_DET)
+ | RK3328_INT_TMDS_D0(RK3328_INT_VSS_AGND_ESD_DET));
+ return 0;
+}
+
+static void inno_hdmi_phy_rk3328_power_off(struct inno_hdmi_phy *inno)
+{
+ inno_update_bits(inno, 0xb2, RK3328_TMDS_DRIVER_ENABLE, 0);
+ inno_update_bits(inno, 0xb0, RK3328_BANDGAP_ENABLE, 0);
+ inno_update_bits(inno, 0xaa, RK3328_POST_PLL_POWER_DOWN,
+ RK3328_POST_PLL_POWER_DOWN);
+
+ /* Disable PHY IRQ */
+ inno_write(inno, 0x05, 0);
+ inno_write(inno, 0x07, 0);
+}
+
+static const struct inno_hdmi_phy_ops rk3328_hdmi_phy_ops = {
+ .init = inno_hdmi_phy_rk3328_init,
+ .power_on = inno_hdmi_phy_rk3328_power_on,
+ .power_off = inno_hdmi_phy_rk3328_power_off,
+};
+
+static const struct inno_hdmi_phy_drv_data rk3228_hdmi_phy_drv_data = {
+ .ops = &rk3228_hdmi_phy_ops,
+ .clk_ops = &inno_hdmi_phy_rk3228_clk_ops,
+ .phy_cfg_table = rk3228_phy_cfg,
+};
+
+static const struct inno_hdmi_phy_drv_data rk3328_hdmi_phy_drv_data = {
+ .ops = &rk3328_hdmi_phy_ops,
+ .clk_ops = &inno_hdmi_phy_rk3328_clk_ops,
+ .phy_cfg_table = rk3328_phy_cfg,
+};
+
+static const struct regmap_config inno_hdmi_phy_regmap_config = {
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = 4,
+ .max_register = 0x400,
+};
+
+static void inno_hdmi_phy_action(void *data)
+{
+ struct inno_hdmi_phy *inno = data;
+
+ clk_disable_unprepare(inno->refpclk);
+ clk_disable_unprepare(inno->sysclk);
+}
+
+static int inno_hdmi_phy_probe(struct platform_device *pdev)
+{
+ struct inno_hdmi_phy *inno;
+ struct phy_provider *phy_provider;
+ void __iomem *regs;
+ int ret;
+
+ inno = devm_kzalloc(&pdev->dev, sizeof(*inno), GFP_KERNEL);
+ if (!inno)
+ return -ENOMEM;
+
+ inno->dev = &pdev->dev;
+
+ inno->plat_data = of_device_get_match_data(inno->dev);
+ if (!inno->plat_data || !inno->plat_data->ops)
+ return -EINVAL;
+
+ regs = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(regs))
+ return PTR_ERR(regs);
+
+ inno->sysclk = devm_clk_get(inno->dev, "sysclk");
+ if (IS_ERR(inno->sysclk)) {
+ ret = PTR_ERR(inno->sysclk);
+ dev_err(inno->dev, "failed to get sysclk: %d\n", ret);
+ return ret;
+ }
+
+ inno->refpclk = devm_clk_get(inno->dev, "refpclk");
+ if (IS_ERR(inno->refpclk)) {
+ ret = PTR_ERR(inno->refpclk);
+ dev_err(inno->dev, "failed to get ref clock: %d\n", ret);
+ return ret;
+ }
+
+ inno->refoclk = devm_clk_get(inno->dev, "refoclk");
+ if (IS_ERR(inno->refoclk)) {
+ ret = PTR_ERR(inno->refoclk);
+ dev_err(inno->dev, "failed to get oscillator-ref clock: %d\n",
+ ret);
+ return ret;
+ }
+
+ ret = clk_prepare_enable(inno->sysclk);
+ if (ret) {
+ dev_err(inno->dev, "Cannot enable inno phy sysclk: %d\n", ret);
+ return ret;
+ }
+
+ /*
+ * Refpclk needs to be on, on at least the rk3328 for still
+ * unknown reasons.
+ */
+ ret = clk_prepare_enable(inno->refpclk);
+ if (ret) {
+ dev_err(inno->dev, "failed to enable refpclk\n");
+ clk_disable_unprepare(inno->sysclk);
+ return ret;
+ }
+
+ ret = devm_add_action_or_reset(inno->dev, inno_hdmi_phy_action,
+ inno);
+ if (ret)
+ return ret;
+
+ inno->regmap = devm_regmap_init_mmio(inno->dev, regs,
+ &inno_hdmi_phy_regmap_config);
+ if (IS_ERR(inno->regmap))
+ return PTR_ERR(inno->regmap);
+
+ /* only the newer rk3328 hdmiphy has an interrupt */
+ inno->irq = platform_get_irq(pdev, 0);
+ if (inno->irq > 0) {
+ ret = devm_request_threaded_irq(inno->dev, inno->irq,
+ inno_hdmi_phy_rk3328_hardirq,
+ inno_hdmi_phy_rk3328_irq,
+ IRQF_SHARED,
+ dev_name(inno->dev), inno);
+ if (ret)
+ return ret;
+ }
+
+ inno->phy = devm_phy_create(inno->dev, NULL, &inno_hdmi_phy_ops);
+ if (IS_ERR(inno->phy)) {
+ dev_err(inno->dev, "failed to create HDMI PHY\n");
+ return PTR_ERR(inno->phy);
+ }
+
+ phy_set_drvdata(inno->phy, inno);
+ phy_set_bus_width(inno->phy, 8);
+
+ if (inno->plat_data->ops->init) {
+ ret = inno->plat_data->ops->init(inno);
+ if (ret)
+ return ret;
+ }
+
+ ret = inno_hdmi_phy_clk_register(inno);
+ if (ret)
+ return ret;
+
+ phy_provider = devm_of_phy_provider_register(inno->dev,
+ of_phy_simple_xlate);
+ return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static void inno_hdmi_phy_remove(struct platform_device *pdev)
+{
+ of_clk_del_provider(pdev->dev.of_node);
+}
+
+static const struct of_device_id inno_hdmi_phy_of_match[] = {
+ {
+ .compatible = "rockchip,rk3228-hdmi-phy",
+ .data = &rk3228_hdmi_phy_drv_data
+ }, {
+ .compatible = "rockchip,rk3328-hdmi-phy",
+ .data = &rk3328_hdmi_phy_drv_data
+ }, { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, inno_hdmi_phy_of_match);
+
+static struct platform_driver inno_hdmi_phy_driver = {
+ .probe = inno_hdmi_phy_probe,
+ .remove_new = inno_hdmi_phy_remove,
+ .driver = {
+ .name = "inno-hdmi-phy",
+ .of_match_table = inno_hdmi_phy_of_match,
+ },
+};
+module_platform_driver(inno_hdmi_phy_driver);
+
+MODULE_AUTHOR("Zheng Yang <zhengyang@rock-chips.com>");
+MODULE_DESCRIPTION("Innosilion HDMI 2.0 Transmitter PHY Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
new file mode 100644
index 0000000000..b982c3f0d4
--- /dev/null
+++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
@@ -0,0 +1,2018 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Rockchip USB2.0 PHY with Innosilicon IP block driver
+ *
+ * Copyright (C) 2016 Fuzhou Rockchip Electronics Co., Ltd
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/extcon-provider.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/gpio/consumer.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include <linux/mfd/syscon.h>
+#include <linux/usb/of.h>
+#include <linux/usb/otg.h>
+
+#define BIT_WRITEABLE_SHIFT 16
+#define SCHEDULE_DELAY (60 * HZ)
+#define OTG_SCHEDULE_DELAY (2 * HZ)
+
+struct rockchip_usb2phy;
+
+enum rockchip_usb2phy_port_id {
+ USB2PHY_PORT_OTG,
+ USB2PHY_PORT_HOST,
+ USB2PHY_NUM_PORTS,
+};
+
+enum rockchip_usb2phy_host_state {
+ PHY_STATE_HS_ONLINE = 0,
+ PHY_STATE_DISCONNECT = 1,
+ PHY_STATE_CONNECT = 2,
+ PHY_STATE_FS_LS_ONLINE = 4,
+};
+
+/**
+ * enum usb_chg_state - Different states involved in USB charger detection.
+ * @USB_CHG_STATE_UNDEFINED: USB charger is not connected or detection
+ * process is not yet started.
+ * @USB_CHG_STATE_WAIT_FOR_DCD: Waiting for Data pins contact.
+ * @USB_CHG_STATE_DCD_DONE: Data pin contact is detected.
+ * @USB_CHG_STATE_PRIMARY_DONE: Primary detection is completed (Detects
+ * between SDP and DCP/CDP).
+ * @USB_CHG_STATE_SECONDARY_DONE: Secondary detection is completed (Detects
+ * between DCP and CDP).
+ * @USB_CHG_STATE_DETECTED: USB charger type is determined.
+ */
+enum usb_chg_state {
+ USB_CHG_STATE_UNDEFINED = 0,
+ USB_CHG_STATE_WAIT_FOR_DCD,
+ USB_CHG_STATE_DCD_DONE,
+ USB_CHG_STATE_PRIMARY_DONE,
+ USB_CHG_STATE_SECONDARY_DONE,
+ USB_CHG_STATE_DETECTED,
+};
+
+static const unsigned int rockchip_usb2phy_extcon_cable[] = {
+ EXTCON_USB,
+ EXTCON_USB_HOST,
+ EXTCON_CHG_USB_SDP,
+ EXTCON_CHG_USB_CDP,
+ EXTCON_CHG_USB_DCP,
+ EXTCON_CHG_USB_SLOW,
+ EXTCON_NONE,
+};
+
+struct usb2phy_reg {
+ unsigned int offset;
+ unsigned int bitend;
+ unsigned int bitstart;
+ unsigned int disable;
+ unsigned int enable;
+};
+
+/**
+ * struct rockchip_chg_det_reg - usb charger detect registers
+ * @cp_det: charging port detected successfully.
+ * @dcp_det: dedicated charging port detected successfully.
+ * @dp_det: assert data pin connect successfully.
+ * @idm_sink_en: open dm sink curren.
+ * @idp_sink_en: open dp sink current.
+ * @idp_src_en: open dm source current.
+ * @rdm_pdwn_en: open dm pull down resistor.
+ * @vdm_src_en: open dm voltage source.
+ * @vdp_src_en: open dp voltage source.
+ * @opmode: utmi operational mode.
+ */
+struct rockchip_chg_det_reg {
+ struct usb2phy_reg cp_det;
+ struct usb2phy_reg dcp_det;
+ struct usb2phy_reg dp_det;
+ struct usb2phy_reg idm_sink_en;
+ struct usb2phy_reg idp_sink_en;
+ struct usb2phy_reg idp_src_en;
+ struct usb2phy_reg rdm_pdwn_en;
+ struct usb2phy_reg vdm_src_en;
+ struct usb2phy_reg vdp_src_en;
+ struct usb2phy_reg opmode;
+};
+
+/**
+ * struct rockchip_usb2phy_port_cfg - usb-phy port configuration.
+ * @phy_sus: phy suspend register.
+ * @bvalid_det_en: vbus valid rise detection enable register.
+ * @bvalid_det_st: vbus valid rise detection status register.
+ * @bvalid_det_clr: vbus valid rise detection clear register.
+ * @disfall_en: host disconnect fall edge detection enable.
+ * @disfall_st: host disconnect fall edge detection state.
+ * @disfall_clr: host disconnect fall edge detection clear.
+ * @disrise_en: host disconnect rise edge detection enable.
+ * @disrise_st: host disconnect rise edge detection state.
+ * @disrise_clr: host disconnect rise edge detection clear.
+ * @id_det_en: id detection enable register.
+ * @id_det_st: id detection state register.
+ * @id_det_clr: id detection clear register.
+ * @ls_det_en: linestate detection enable register.
+ * @ls_det_st: linestate detection state register.
+ * @ls_det_clr: linestate detection clear register.
+ * @utmi_avalid: utmi vbus avalid status register.
+ * @utmi_bvalid: utmi vbus bvalid status register.
+ * @utmi_id: utmi id state register.
+ * @utmi_ls: utmi linestate state register.
+ * @utmi_hstdet: utmi host disconnect register.
+ */
+struct rockchip_usb2phy_port_cfg {
+ struct usb2phy_reg phy_sus;
+ struct usb2phy_reg bvalid_det_en;
+ struct usb2phy_reg bvalid_det_st;
+ struct usb2phy_reg bvalid_det_clr;
+ struct usb2phy_reg disfall_en;
+ struct usb2phy_reg disfall_st;
+ struct usb2phy_reg disfall_clr;
+ struct usb2phy_reg disrise_en;
+ struct usb2phy_reg disrise_st;
+ struct usb2phy_reg disrise_clr;
+ struct usb2phy_reg id_det_en;
+ struct usb2phy_reg id_det_st;
+ struct usb2phy_reg id_det_clr;
+ struct usb2phy_reg ls_det_en;
+ struct usb2phy_reg ls_det_st;
+ struct usb2phy_reg ls_det_clr;
+ struct usb2phy_reg utmi_avalid;
+ struct usb2phy_reg utmi_bvalid;
+ struct usb2phy_reg utmi_id;
+ struct usb2phy_reg utmi_ls;
+ struct usb2phy_reg utmi_hstdet;
+};
+
+/**
+ * struct rockchip_usb2phy_cfg - usb-phy configuration.
+ * @reg: the address offset of grf for usb-phy config.
+ * @num_ports: specify how many ports that the phy has.
+ * @phy_tuning: phy default parameters tuning.
+ * @clkout_ctl: keep on/turn off output clk of phy.
+ * @port_cfgs: usb-phy port configurations.
+ * @chg_det: charger detection registers.
+ */
+struct rockchip_usb2phy_cfg {
+ unsigned int reg;
+ unsigned int num_ports;
+ int (*phy_tuning)(struct rockchip_usb2phy *rphy);
+ struct usb2phy_reg clkout_ctl;
+ const struct rockchip_usb2phy_port_cfg port_cfgs[USB2PHY_NUM_PORTS];
+ const struct rockchip_chg_det_reg chg_det;
+};
+
+/**
+ * struct rockchip_usb2phy_port - usb-phy port data.
+ * @phy: generic phy.
+ * @port_id: flag for otg port or host port.
+ * @suspended: phy suspended flag.
+ * @vbus_attached: otg device vbus status.
+ * @host_disconnect: usb host disconnect status.
+ * @bvalid_irq: IRQ number assigned for vbus valid rise detection.
+ * @id_irq: IRQ number assigned for ID pin detection.
+ * @ls_irq: IRQ number assigned for linestate detection.
+ * @otg_mux_irq: IRQ number which multiplex otg-id/otg-bvalid/linestate
+ * irqs to one irq in otg-port.
+ * @mutex: for register updating in sm_work.
+ * @chg_work: charge detect work.
+ * @otg_sm_work: OTG state machine work.
+ * @sm_work: HOST state machine work.
+ * @port_cfg: port register configuration, assigned by driver data.
+ * @event_nb: hold event notification callback.
+ * @state: define OTG enumeration states before device reset.
+ * @mode: the dr_mode of the controller.
+ */
+struct rockchip_usb2phy_port {
+ struct phy *phy;
+ unsigned int port_id;
+ bool suspended;
+ bool vbus_attached;
+ bool host_disconnect;
+ int bvalid_irq;
+ int id_irq;
+ int ls_irq;
+ int otg_mux_irq;
+ struct mutex mutex;
+ struct delayed_work chg_work;
+ struct delayed_work otg_sm_work;
+ struct delayed_work sm_work;
+ const struct rockchip_usb2phy_port_cfg *port_cfg;
+ struct notifier_block event_nb;
+ enum usb_otg_state state;
+ enum usb_dr_mode mode;
+};
+
+/**
+ * struct rockchip_usb2phy - usb2.0 phy driver data.
+ * @dev: pointer to device.
+ * @grf: General Register Files regmap.
+ * @usbgrf: USB General Register Files regmap.
+ * @clk: clock struct of phy input clk.
+ * @clk480m: clock struct of phy output clk.
+ * @clk480m_hw: clock struct of phy output clk management.
+ * @phy_reset: phy reset control.
+ * @chg_state: states involved in USB charger detection.
+ * @chg_type: USB charger types.
+ * @dcd_retries: The retry count used to track Data contact
+ * detection process.
+ * @edev: extcon device for notification registration
+ * @irq: muxed interrupt for single irq configuration
+ * @phy_cfg: phy register configuration, assigned by driver data.
+ * @ports: phy port instance.
+ */
+struct rockchip_usb2phy {
+ struct device *dev;
+ struct regmap *grf;
+ struct regmap *usbgrf;
+ struct clk *clk;
+ struct clk *clk480m;
+ struct clk_hw clk480m_hw;
+ struct reset_control *phy_reset;
+ enum usb_chg_state chg_state;
+ enum power_supply_type chg_type;
+ u8 dcd_retries;
+ struct extcon_dev *edev;
+ int irq;
+ const struct rockchip_usb2phy_cfg *phy_cfg;
+ struct rockchip_usb2phy_port ports[USB2PHY_NUM_PORTS];
+};
+
+static inline struct regmap *get_reg_base(struct rockchip_usb2phy *rphy)
+{
+ return rphy->usbgrf == NULL ? rphy->grf : rphy->usbgrf;
+}
+
+static inline int property_enable(struct regmap *base,
+ const struct usb2phy_reg *reg, bool en)
+{
+ unsigned int val, mask, tmp;
+
+ tmp = en ? reg->enable : reg->disable;
+ mask = GENMASK(reg->bitend, reg->bitstart);
+ val = (tmp << reg->bitstart) | (mask << BIT_WRITEABLE_SHIFT);
+
+ return regmap_write(base, reg->offset, val);
+}
+
+static inline bool property_enabled(struct regmap *base,
+ const struct usb2phy_reg *reg)
+{
+ int ret;
+ unsigned int tmp, orig;
+ unsigned int mask = GENMASK(reg->bitend, reg->bitstart);
+
+ ret = regmap_read(base, reg->offset, &orig);
+ if (ret)
+ return false;
+
+ tmp = (orig & mask) >> reg->bitstart;
+ return tmp != reg->disable;
+}
+
+static int rockchip_usb2phy_reset(struct rockchip_usb2phy *rphy)
+{
+ int ret;
+
+ ret = reset_control_assert(rphy->phy_reset);
+ if (ret)
+ return ret;
+
+ udelay(10);
+
+ ret = reset_control_deassert(rphy->phy_reset);
+ if (ret)
+ return ret;
+
+ usleep_range(100, 200);
+
+ return 0;
+}
+
+static int rockchip_usb2phy_clk480m_prepare(struct clk_hw *hw)
+{
+ struct rockchip_usb2phy *rphy =
+ container_of(hw, struct rockchip_usb2phy, clk480m_hw);
+ struct regmap *base = get_reg_base(rphy);
+ int ret;
+
+ /* turn on 480m clk output if it is off */
+ if (!property_enabled(base, &rphy->phy_cfg->clkout_ctl)) {
+ ret = property_enable(base, &rphy->phy_cfg->clkout_ctl, true);
+ if (ret)
+ return ret;
+
+ /* waiting for the clk become stable */
+ usleep_range(1200, 1300);
+ }
+
+ return 0;
+}
+
+static void rockchip_usb2phy_clk480m_unprepare(struct clk_hw *hw)
+{
+ struct rockchip_usb2phy *rphy =
+ container_of(hw, struct rockchip_usb2phy, clk480m_hw);
+ struct regmap *base = get_reg_base(rphy);
+
+ /* turn off 480m clk output */
+ property_enable(base, &rphy->phy_cfg->clkout_ctl, false);
+}
+
+static int rockchip_usb2phy_clk480m_prepared(struct clk_hw *hw)
+{
+ struct rockchip_usb2phy *rphy =
+ container_of(hw, struct rockchip_usb2phy, clk480m_hw);
+ struct regmap *base = get_reg_base(rphy);
+
+ return property_enabled(base, &rphy->phy_cfg->clkout_ctl);
+}
+
+static unsigned long
+rockchip_usb2phy_clk480m_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ return 480000000;
+}
+
+static const struct clk_ops rockchip_usb2phy_clkout_ops = {
+ .prepare = rockchip_usb2phy_clk480m_prepare,
+ .unprepare = rockchip_usb2phy_clk480m_unprepare,
+ .is_prepared = rockchip_usb2phy_clk480m_prepared,
+ .recalc_rate = rockchip_usb2phy_clk480m_recalc_rate,
+};
+
+static void rockchip_usb2phy_clk480m_unregister(void *data)
+{
+ struct rockchip_usb2phy *rphy = data;
+
+ of_clk_del_provider(rphy->dev->of_node);
+ clk_unregister(rphy->clk480m);
+}
+
+static int
+rockchip_usb2phy_clk480m_register(struct rockchip_usb2phy *rphy)
+{
+ struct device_node *node = rphy->dev->of_node;
+ struct clk_init_data init;
+ const char *clk_name;
+ int ret = 0;
+
+ init.flags = 0;
+ init.name = "clk_usbphy_480m";
+ init.ops = &rockchip_usb2phy_clkout_ops;
+
+ /* optional override of the clockname */
+ of_property_read_string(node, "clock-output-names", &init.name);
+
+ if (rphy->clk) {
+ clk_name = __clk_get_name(rphy->clk);
+ init.parent_names = &clk_name;
+ init.num_parents = 1;
+ } else {
+ init.parent_names = NULL;
+ init.num_parents = 0;
+ }
+
+ rphy->clk480m_hw.init = &init;
+
+ /* register the clock */
+ rphy->clk480m = clk_register(rphy->dev, &rphy->clk480m_hw);
+ if (IS_ERR(rphy->clk480m)) {
+ ret = PTR_ERR(rphy->clk480m);
+ goto err_ret;
+ }
+
+ ret = of_clk_add_provider(node, of_clk_src_simple_get, rphy->clk480m);
+ if (ret < 0)
+ goto err_clk_provider;
+
+ return devm_add_action_or_reset(rphy->dev, rockchip_usb2phy_clk480m_unregister, rphy);
+
+err_clk_provider:
+ clk_unregister(rphy->clk480m);
+err_ret:
+ return ret;
+}
+
+static int rockchip_usb2phy_extcon_register(struct rockchip_usb2phy *rphy)
+{
+ int ret;
+ struct device_node *node = rphy->dev->of_node;
+ struct extcon_dev *edev;
+
+ if (of_property_read_bool(node, "extcon")) {
+ edev = extcon_get_edev_by_phandle(rphy->dev, 0);
+ if (IS_ERR(edev)) {
+ if (PTR_ERR(edev) != -EPROBE_DEFER)
+ dev_err(rphy->dev, "Invalid or missing extcon\n");
+ return PTR_ERR(edev);
+ }
+ } else {
+ /* Initialize extcon device */
+ edev = devm_extcon_dev_allocate(rphy->dev,
+ rockchip_usb2phy_extcon_cable);
+
+ if (IS_ERR(edev))
+ return -ENOMEM;
+
+ ret = devm_extcon_dev_register(rphy->dev, edev);
+ if (ret) {
+ dev_err(rphy->dev, "failed to register extcon device\n");
+ return ret;
+ }
+ }
+
+ rphy->edev = edev;
+
+ return 0;
+}
+
+static int rockchip_usb2phy_enable_host_disc_irq(struct rockchip_usb2phy *rphy,
+ struct rockchip_usb2phy_port *rport,
+ bool en)
+{
+ int ret;
+
+ ret = property_enable(rphy->grf, &rport->port_cfg->disfall_clr, true);
+ if (ret)
+ return ret;
+
+ ret = property_enable(rphy->grf, &rport->port_cfg->disfall_en, en);
+ if (ret)
+ return ret;
+
+ ret = property_enable(rphy->grf, &rport->port_cfg->disrise_clr, true);
+ if (ret)
+ return ret;
+
+ return property_enable(rphy->grf, &rport->port_cfg->disrise_en, en);
+}
+
+static int rockchip_usb2phy_init(struct phy *phy)
+{
+ struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy);
+ struct rockchip_usb2phy *rphy = dev_get_drvdata(phy->dev.parent);
+ int ret = 0;
+
+ mutex_lock(&rport->mutex);
+
+ if (rport->port_id == USB2PHY_PORT_OTG) {
+ if (rport->mode != USB_DR_MODE_HOST &&
+ rport->mode != USB_DR_MODE_UNKNOWN) {
+ /* clear bvalid status and enable bvalid detect irq */
+ ret = property_enable(rphy->grf,
+ &rport->port_cfg->bvalid_det_clr,
+ true);
+ if (ret)
+ goto out;
+
+ ret = property_enable(rphy->grf,
+ &rport->port_cfg->bvalid_det_en,
+ true);
+ if (ret)
+ goto out;
+
+ /* clear id status and enable id detect irq */
+ ret = property_enable(rphy->grf,
+ &rport->port_cfg->id_det_clr,
+ true);
+ if (ret)
+ goto out;
+
+ ret = property_enable(rphy->grf,
+ &rport->port_cfg->id_det_en,
+ true);
+ if (ret)
+ goto out;
+
+ schedule_delayed_work(&rport->otg_sm_work,
+ OTG_SCHEDULE_DELAY * 3);
+ } else {
+ /* If OTG works in host only mode, do nothing. */
+ dev_dbg(&rport->phy->dev, "mode %d\n", rport->mode);
+ }
+ } else if (rport->port_id == USB2PHY_PORT_HOST) {
+ if (rport->port_cfg->disfall_en.offset) {
+ rport->host_disconnect = true;
+ ret = rockchip_usb2phy_enable_host_disc_irq(rphy, rport, true);
+ if (ret) {
+ dev_err(rphy->dev, "failed to enable disconnect irq\n");
+ goto out;
+ }
+ }
+
+ /* clear linestate and enable linestate detect irq */
+ ret = property_enable(rphy->grf,
+ &rport->port_cfg->ls_det_clr, true);
+ if (ret)
+ goto out;
+
+ ret = property_enable(rphy->grf,
+ &rport->port_cfg->ls_det_en, true);
+ if (ret)
+ goto out;
+
+ schedule_delayed_work(&rport->sm_work, SCHEDULE_DELAY);
+ }
+
+out:
+ mutex_unlock(&rport->mutex);
+ return ret;
+}
+
+static int rockchip_usb2phy_power_on(struct phy *phy)
+{
+ struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy);
+ struct rockchip_usb2phy *rphy = dev_get_drvdata(phy->dev.parent);
+ struct regmap *base = get_reg_base(rphy);
+ int ret;
+
+ dev_dbg(&rport->phy->dev, "port power on\n");
+
+ if (!rport->suspended)
+ return 0;
+
+ ret = clk_prepare_enable(rphy->clk480m);
+ if (ret)
+ return ret;
+
+ ret = property_enable(base, &rport->port_cfg->phy_sus, false);
+ if (ret) {
+ clk_disable_unprepare(rphy->clk480m);
+ return ret;
+ }
+
+ /*
+ * For rk3588, it needs to reset phy when exit from
+ * suspend mode with common_on_n 1'b1(aka REFCLK_LOGIC,
+ * Bias, and PLL blocks are powered down) for lower
+ * power consumption. If you don't want to reset phy,
+ * please keep the common_on_n 1'b0 to set these blocks
+ * remain powered.
+ */
+ ret = rockchip_usb2phy_reset(rphy);
+ if (ret)
+ return ret;
+
+ /* waiting for the utmi_clk to become stable */
+ usleep_range(1500, 2000);
+
+ rport->suspended = false;
+ return 0;
+}
+
+static int rockchip_usb2phy_power_off(struct phy *phy)
+{
+ struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy);
+ struct rockchip_usb2phy *rphy = dev_get_drvdata(phy->dev.parent);
+ struct regmap *base = get_reg_base(rphy);
+ int ret;
+
+ dev_dbg(&rport->phy->dev, "port power off\n");
+
+ if (rport->suspended)
+ return 0;
+
+ ret = property_enable(base, &rport->port_cfg->phy_sus, true);
+ if (ret)
+ return ret;
+
+ rport->suspended = true;
+ clk_disable_unprepare(rphy->clk480m);
+
+ return 0;
+}
+
+static int rockchip_usb2phy_exit(struct phy *phy)
+{
+ struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy);
+
+ if (rport->port_id == USB2PHY_PORT_OTG &&
+ rport->mode != USB_DR_MODE_HOST &&
+ rport->mode != USB_DR_MODE_UNKNOWN) {
+ cancel_delayed_work_sync(&rport->otg_sm_work);
+ cancel_delayed_work_sync(&rport->chg_work);
+ } else if (rport->port_id == USB2PHY_PORT_HOST)
+ cancel_delayed_work_sync(&rport->sm_work);
+
+ return 0;
+}
+
+static const struct phy_ops rockchip_usb2phy_ops = {
+ .init = rockchip_usb2phy_init,
+ .exit = rockchip_usb2phy_exit,
+ .power_on = rockchip_usb2phy_power_on,
+ .power_off = rockchip_usb2phy_power_off,
+ .owner = THIS_MODULE,
+};
+
+static void rockchip_usb2phy_otg_sm_work(struct work_struct *work)
+{
+ struct rockchip_usb2phy_port *rport =
+ container_of(work, struct rockchip_usb2phy_port,
+ otg_sm_work.work);
+ struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent);
+ static unsigned int cable;
+ unsigned long delay;
+ bool vbus_attach, sch_work, notify_charger;
+
+ vbus_attach = property_enabled(rphy->grf,
+ &rport->port_cfg->utmi_bvalid);
+
+ sch_work = false;
+ notify_charger = false;
+ delay = OTG_SCHEDULE_DELAY;
+ dev_dbg(&rport->phy->dev, "%s otg sm work\n",
+ usb_otg_state_string(rport->state));
+
+ switch (rport->state) {
+ case OTG_STATE_UNDEFINED:
+ rport->state = OTG_STATE_B_IDLE;
+ if (!vbus_attach)
+ rockchip_usb2phy_power_off(rport->phy);
+ fallthrough;
+ case OTG_STATE_B_IDLE:
+ if (extcon_get_state(rphy->edev, EXTCON_USB_HOST) > 0) {
+ dev_dbg(&rport->phy->dev, "usb otg host connect\n");
+ rport->state = OTG_STATE_A_HOST;
+ rockchip_usb2phy_power_on(rport->phy);
+ return;
+ } else if (vbus_attach) {
+ dev_dbg(&rport->phy->dev, "vbus_attach\n");
+ switch (rphy->chg_state) {
+ case USB_CHG_STATE_UNDEFINED:
+ schedule_delayed_work(&rport->chg_work, 0);
+ return;
+ case USB_CHG_STATE_DETECTED:
+ switch (rphy->chg_type) {
+ case POWER_SUPPLY_TYPE_USB:
+ dev_dbg(&rport->phy->dev, "sdp cable is connected\n");
+ rockchip_usb2phy_power_on(rport->phy);
+ rport->state = OTG_STATE_B_PERIPHERAL;
+ notify_charger = true;
+ sch_work = true;
+ cable = EXTCON_CHG_USB_SDP;
+ break;
+ case POWER_SUPPLY_TYPE_USB_DCP:
+ dev_dbg(&rport->phy->dev, "dcp cable is connected\n");
+ rockchip_usb2phy_power_off(rport->phy);
+ notify_charger = true;
+ sch_work = true;
+ cable = EXTCON_CHG_USB_DCP;
+ break;
+ case POWER_SUPPLY_TYPE_USB_CDP:
+ dev_dbg(&rport->phy->dev, "cdp cable is connected\n");
+ rockchip_usb2phy_power_on(rport->phy);
+ rport->state = OTG_STATE_B_PERIPHERAL;
+ notify_charger = true;
+ sch_work = true;
+ cable = EXTCON_CHG_USB_CDP;
+ break;
+ default:
+ break;
+ }
+ break;
+ default:
+ break;
+ }
+ } else {
+ notify_charger = true;
+ rphy->chg_state = USB_CHG_STATE_UNDEFINED;
+ rphy->chg_type = POWER_SUPPLY_TYPE_UNKNOWN;
+ }
+
+ if (rport->vbus_attached != vbus_attach) {
+ rport->vbus_attached = vbus_attach;
+
+ if (notify_charger && rphy->edev) {
+ extcon_set_state_sync(rphy->edev,
+ cable, vbus_attach);
+ if (cable == EXTCON_CHG_USB_SDP)
+ extcon_set_state_sync(rphy->edev,
+ EXTCON_USB,
+ vbus_attach);
+ }
+ }
+ break;
+ case OTG_STATE_B_PERIPHERAL:
+ if (!vbus_attach) {
+ dev_dbg(&rport->phy->dev, "usb disconnect\n");
+ rphy->chg_state = USB_CHG_STATE_UNDEFINED;
+ rphy->chg_type = POWER_SUPPLY_TYPE_UNKNOWN;
+ rport->state = OTG_STATE_B_IDLE;
+ delay = 0;
+ rockchip_usb2phy_power_off(rport->phy);
+ }
+ sch_work = true;
+ break;
+ case OTG_STATE_A_HOST:
+ if (extcon_get_state(rphy->edev, EXTCON_USB_HOST) == 0) {
+ dev_dbg(&rport->phy->dev, "usb otg host disconnect\n");
+ rport->state = OTG_STATE_B_IDLE;
+ rockchip_usb2phy_power_off(rport->phy);
+ }
+ break;
+ default:
+ break;
+ }
+
+ if (sch_work)
+ schedule_delayed_work(&rport->otg_sm_work, delay);
+}
+
+static const char *chg_to_string(enum power_supply_type chg_type)
+{
+ switch (chg_type) {
+ case POWER_SUPPLY_TYPE_USB:
+ return "USB_SDP_CHARGER";
+ case POWER_SUPPLY_TYPE_USB_DCP:
+ return "USB_DCP_CHARGER";
+ case POWER_SUPPLY_TYPE_USB_CDP:
+ return "USB_CDP_CHARGER";
+ default:
+ return "INVALID_CHARGER";
+ }
+}
+
+static void rockchip_chg_enable_dcd(struct rockchip_usb2phy *rphy,
+ bool en)
+{
+ struct regmap *base = get_reg_base(rphy);
+
+ property_enable(base, &rphy->phy_cfg->chg_det.rdm_pdwn_en, en);
+ property_enable(base, &rphy->phy_cfg->chg_det.idp_src_en, en);
+}
+
+static void rockchip_chg_enable_primary_det(struct rockchip_usb2phy *rphy,
+ bool en)
+{
+ struct regmap *base = get_reg_base(rphy);
+
+ property_enable(base, &rphy->phy_cfg->chg_det.vdp_src_en, en);
+ property_enable(base, &rphy->phy_cfg->chg_det.idm_sink_en, en);
+}
+
+static void rockchip_chg_enable_secondary_det(struct rockchip_usb2phy *rphy,
+ bool en)
+{
+ struct regmap *base = get_reg_base(rphy);
+
+ property_enable(base, &rphy->phy_cfg->chg_det.vdm_src_en, en);
+ property_enable(base, &rphy->phy_cfg->chg_det.idp_sink_en, en);
+}
+
+#define CHG_DCD_POLL_TIME (100 * HZ / 1000)
+#define CHG_DCD_MAX_RETRIES 6
+#define CHG_PRIMARY_DET_TIME (40 * HZ / 1000)
+#define CHG_SECONDARY_DET_TIME (40 * HZ / 1000)
+static void rockchip_chg_detect_work(struct work_struct *work)
+{
+ struct rockchip_usb2phy_port *rport =
+ container_of(work, struct rockchip_usb2phy_port, chg_work.work);
+ struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent);
+ struct regmap *base = get_reg_base(rphy);
+ bool is_dcd, tmout, vout;
+ unsigned long delay;
+
+ dev_dbg(&rport->phy->dev, "chg detection work state = %d\n",
+ rphy->chg_state);
+ switch (rphy->chg_state) {
+ case USB_CHG_STATE_UNDEFINED:
+ if (!rport->suspended)
+ rockchip_usb2phy_power_off(rport->phy);
+ /* put the controller in non-driving mode */
+ property_enable(base, &rphy->phy_cfg->chg_det.opmode, false);
+ /* Start DCD processing stage 1 */
+ rockchip_chg_enable_dcd(rphy, true);
+ rphy->chg_state = USB_CHG_STATE_WAIT_FOR_DCD;
+ rphy->dcd_retries = 0;
+ delay = CHG_DCD_POLL_TIME;
+ break;
+ case USB_CHG_STATE_WAIT_FOR_DCD:
+ /* get data contact detection status */
+ is_dcd = property_enabled(rphy->grf,
+ &rphy->phy_cfg->chg_det.dp_det);
+ tmout = ++rphy->dcd_retries == CHG_DCD_MAX_RETRIES;
+ /* stage 2 */
+ if (is_dcd || tmout) {
+ /* stage 4 */
+ /* Turn off DCD circuitry */
+ rockchip_chg_enable_dcd(rphy, false);
+ /* Voltage Source on DP, Probe on DM */
+ rockchip_chg_enable_primary_det(rphy, true);
+ delay = CHG_PRIMARY_DET_TIME;
+ rphy->chg_state = USB_CHG_STATE_DCD_DONE;
+ } else {
+ /* stage 3 */
+ delay = CHG_DCD_POLL_TIME;
+ }
+ break;
+ case USB_CHG_STATE_DCD_DONE:
+ vout = property_enabled(rphy->grf,
+ &rphy->phy_cfg->chg_det.cp_det);
+ rockchip_chg_enable_primary_det(rphy, false);
+ if (vout) {
+ /* Voltage Source on DM, Probe on DP */
+ rockchip_chg_enable_secondary_det(rphy, true);
+ delay = CHG_SECONDARY_DET_TIME;
+ rphy->chg_state = USB_CHG_STATE_PRIMARY_DONE;
+ } else {
+ if (rphy->dcd_retries == CHG_DCD_MAX_RETRIES) {
+ /* floating charger found */
+ rphy->chg_type = POWER_SUPPLY_TYPE_USB_DCP;
+ rphy->chg_state = USB_CHG_STATE_DETECTED;
+ delay = 0;
+ } else {
+ rphy->chg_type = POWER_SUPPLY_TYPE_USB;
+ rphy->chg_state = USB_CHG_STATE_DETECTED;
+ delay = 0;
+ }
+ }
+ break;
+ case USB_CHG_STATE_PRIMARY_DONE:
+ vout = property_enabled(rphy->grf,
+ &rphy->phy_cfg->chg_det.dcp_det);
+ /* Turn off voltage source */
+ rockchip_chg_enable_secondary_det(rphy, false);
+ if (vout)
+ rphy->chg_type = POWER_SUPPLY_TYPE_USB_DCP;
+ else
+ rphy->chg_type = POWER_SUPPLY_TYPE_USB_CDP;
+ fallthrough;
+ case USB_CHG_STATE_SECONDARY_DONE:
+ rphy->chg_state = USB_CHG_STATE_DETECTED;
+ fallthrough;
+ case USB_CHG_STATE_DETECTED:
+ /* put the controller in normal mode */
+ property_enable(base, &rphy->phy_cfg->chg_det.opmode, true);
+ rockchip_usb2phy_otg_sm_work(&rport->otg_sm_work.work);
+ dev_dbg(&rport->phy->dev, "charger = %s\n",
+ chg_to_string(rphy->chg_type));
+ return;
+ default:
+ return;
+ }
+
+ schedule_delayed_work(&rport->chg_work, delay);
+}
+
+/*
+ * The function manage host-phy port state and suspend/resume phy port
+ * to save power.
+ *
+ * we rely on utmi_linestate and utmi_hostdisconnect to identify whether
+ * devices is disconnect or not. Besides, we do not need care it is FS/LS
+ * disconnected or HS disconnected, actually, we just only need get the
+ * device is disconnected at last through rearm the delayed work,
+ * to suspend the phy port in _PHY_STATE_DISCONNECT_ case.
+ *
+ * NOTE: It may invoke *phy_powr_off or *phy_power_on which will invoke
+ * some clk related APIs, so do not invoke it from interrupt context directly.
+ */
+static void rockchip_usb2phy_sm_work(struct work_struct *work)
+{
+ struct rockchip_usb2phy_port *rport =
+ container_of(work, struct rockchip_usb2phy_port, sm_work.work);
+ struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent);
+ unsigned int sh, ul, uhd, state;
+ unsigned int ul_mask, uhd_mask;
+ int ret;
+
+ mutex_lock(&rport->mutex);
+
+ ret = regmap_read(rphy->grf, rport->port_cfg->utmi_ls.offset, &ul);
+ if (ret < 0)
+ goto next_schedule;
+
+ ul_mask = GENMASK(rport->port_cfg->utmi_ls.bitend,
+ rport->port_cfg->utmi_ls.bitstart);
+
+ if (rport->port_cfg->utmi_hstdet.offset) {
+ ret = regmap_read(rphy->grf, rport->port_cfg->utmi_hstdet.offset, &uhd);
+ if (ret < 0)
+ goto next_schedule;
+
+ uhd_mask = GENMASK(rport->port_cfg->utmi_hstdet.bitend,
+ rport->port_cfg->utmi_hstdet.bitstart);
+
+ sh = rport->port_cfg->utmi_hstdet.bitend -
+ rport->port_cfg->utmi_hstdet.bitstart + 1;
+ /* stitch on utmi_ls and utmi_hstdet as phy state */
+ state = ((uhd & uhd_mask) >> rport->port_cfg->utmi_hstdet.bitstart) |
+ (((ul & ul_mask) >> rport->port_cfg->utmi_ls.bitstart) << sh);
+ } else {
+ state = ((ul & ul_mask) >> rport->port_cfg->utmi_ls.bitstart) << 1 |
+ rport->host_disconnect;
+ }
+
+ switch (state) {
+ case PHY_STATE_HS_ONLINE:
+ dev_dbg(&rport->phy->dev, "HS online\n");
+ break;
+ case PHY_STATE_FS_LS_ONLINE:
+ /*
+ * For FS/LS device, the online state share with connect state
+ * from utmi_ls and utmi_hstdet register, so we distinguish
+ * them via suspended flag.
+ *
+ * Plus, there are two cases, one is D- Line pull-up, and D+
+ * line pull-down, the state is 4; another is D+ line pull-up,
+ * and D- line pull-down, the state is 2.
+ */
+ if (!rport->suspended) {
+ /* D- line pull-up, D+ line pull-down */
+ dev_dbg(&rport->phy->dev, "FS/LS online\n");
+ break;
+ }
+ fallthrough;
+ case PHY_STATE_CONNECT:
+ if (rport->suspended) {
+ dev_dbg(&rport->phy->dev, "Connected\n");
+ rockchip_usb2phy_power_on(rport->phy);
+ rport->suspended = false;
+ } else {
+ /* D+ line pull-up, D- line pull-down */
+ dev_dbg(&rport->phy->dev, "FS/LS online\n");
+ }
+ break;
+ case PHY_STATE_DISCONNECT:
+ if (!rport->suspended) {
+ dev_dbg(&rport->phy->dev, "Disconnected\n");
+ rockchip_usb2phy_power_off(rport->phy);
+ rport->suspended = true;
+ }
+
+ /*
+ * activate the linestate detection to get the next device
+ * plug-in irq.
+ */
+ property_enable(rphy->grf, &rport->port_cfg->ls_det_clr, true);
+ property_enable(rphy->grf, &rport->port_cfg->ls_det_en, true);
+
+ /*
+ * we don't need to rearm the delayed work when the phy port
+ * is suspended.
+ */
+ mutex_unlock(&rport->mutex);
+ return;
+ default:
+ dev_dbg(&rport->phy->dev, "unknown phy state\n");
+ break;
+ }
+
+next_schedule:
+ mutex_unlock(&rport->mutex);
+ schedule_delayed_work(&rport->sm_work, SCHEDULE_DELAY);
+}
+
+static irqreturn_t rockchip_usb2phy_linestate_irq(int irq, void *data)
+{
+ struct rockchip_usb2phy_port *rport = data;
+ struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent);
+
+ if (!property_enabled(rphy->grf, &rport->port_cfg->ls_det_st))
+ return IRQ_NONE;
+
+ mutex_lock(&rport->mutex);
+
+ /* disable linestate detect irq and clear its status */
+ property_enable(rphy->grf, &rport->port_cfg->ls_det_en, false);
+ property_enable(rphy->grf, &rport->port_cfg->ls_det_clr, true);
+
+ mutex_unlock(&rport->mutex);
+
+ /*
+ * In this case for host phy port, a new device is plugged in,
+ * meanwhile, if the phy port is suspended, we need rearm the work to
+ * resume it and mange its states; otherwise, we do nothing about that.
+ */
+ if (rport->suspended && rport->port_id == USB2PHY_PORT_HOST)
+ rockchip_usb2phy_sm_work(&rport->sm_work.work);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t rockchip_usb2phy_bvalid_irq(int irq, void *data)
+{
+ struct rockchip_usb2phy_port *rport = data;
+ struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent);
+
+ if (!property_enabled(rphy->grf, &rport->port_cfg->bvalid_det_st))
+ return IRQ_NONE;
+
+ /* clear bvalid detect irq pending status */
+ property_enable(rphy->grf, &rport->port_cfg->bvalid_det_clr, true);
+
+ rockchip_usb2phy_otg_sm_work(&rport->otg_sm_work.work);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t rockchip_usb2phy_id_irq(int irq, void *data)
+{
+ struct rockchip_usb2phy_port *rport = data;
+ struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent);
+ bool id;
+
+ if (!property_enabled(rphy->grf, &rport->port_cfg->id_det_st))
+ return IRQ_NONE;
+
+ /* clear id detect irq pending status */
+ property_enable(rphy->grf, &rport->port_cfg->id_det_clr, true);
+
+ id = property_enabled(rphy->grf, &rport->port_cfg->utmi_id);
+ extcon_set_state_sync(rphy->edev, EXTCON_USB_HOST, !id);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t rockchip_usb2phy_otg_mux_irq(int irq, void *data)
+{
+ irqreturn_t ret = IRQ_NONE;
+
+ ret |= rockchip_usb2phy_bvalid_irq(irq, data);
+ ret |= rockchip_usb2phy_id_irq(irq, data);
+
+ return ret;
+}
+
+static irqreturn_t rockchip_usb2phy_host_disc_irq(int irq, void *data)
+{
+ struct rockchip_usb2phy_port *rport = data;
+ struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent);
+
+ if (!property_enabled(rphy->grf, &rport->port_cfg->disfall_st) &&
+ !property_enabled(rphy->grf, &rport->port_cfg->disrise_st))
+ return IRQ_NONE;
+
+ mutex_lock(&rport->mutex);
+
+ /* clear disconnect fall or rise detect irq pending status */
+ if (property_enabled(rphy->grf, &rport->port_cfg->disfall_st)) {
+ property_enable(rphy->grf, &rport->port_cfg->disfall_clr, true);
+ rport->host_disconnect = false;
+ } else if (property_enabled(rphy->grf, &rport->port_cfg->disrise_st)) {
+ property_enable(rphy->grf, &rport->port_cfg->disrise_clr, true);
+ rport->host_disconnect = true;
+ }
+
+ mutex_unlock(&rport->mutex);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t rockchip_usb2phy_irq(int irq, void *data)
+{
+ struct rockchip_usb2phy *rphy = data;
+ struct rockchip_usb2phy_port *rport;
+ irqreturn_t ret = IRQ_NONE;
+ unsigned int index;
+
+ for (index = 0; index < rphy->phy_cfg->num_ports; index++) {
+ rport = &rphy->ports[index];
+ if (!rport->phy)
+ continue;
+
+ if (rport->port_id == USB2PHY_PORT_HOST &&
+ rport->port_cfg->disfall_en.offset)
+ ret |= rockchip_usb2phy_host_disc_irq(irq, rport);
+
+ switch (rport->port_id) {
+ case USB2PHY_PORT_OTG:
+ if (rport->mode != USB_DR_MODE_HOST &&
+ rport->mode != USB_DR_MODE_UNKNOWN)
+ ret |= rockchip_usb2phy_otg_mux_irq(irq, rport);
+ break;
+ case USB2PHY_PORT_HOST:
+ ret |= rockchip_usb2phy_linestate_irq(irq, rport);
+ break;
+ }
+ }
+
+ return ret;
+}
+
+static int rockchip_usb2phy_port_irq_init(struct rockchip_usb2phy *rphy,
+ struct rockchip_usb2phy_port *rport,
+ struct device_node *child_np)
+{
+ int ret;
+
+ /*
+ * If the usb2 phy used combined irq for otg and host port,
+ * don't need to init otg and host port irq separately.
+ */
+ if (rphy->irq > 0)
+ return 0;
+
+ switch (rport->port_id) {
+ case USB2PHY_PORT_HOST:
+ rport->ls_irq = of_irq_get_byname(child_np, "linestate");
+ if (rport->ls_irq < 0) {
+ dev_err(rphy->dev, "no linestate irq provided\n");
+ return rport->ls_irq;
+ }
+
+ ret = devm_request_threaded_irq(rphy->dev, rport->ls_irq, NULL,
+ rockchip_usb2phy_linestate_irq,
+ IRQF_ONESHOT,
+ "rockchip_usb2phy", rport);
+ if (ret) {
+ dev_err(rphy->dev, "failed to request linestate irq handle\n");
+ return ret;
+ }
+ break;
+ case USB2PHY_PORT_OTG:
+ /*
+ * Some SoCs use one interrupt with otg-id/otg-bvalid/linestate
+ * interrupts muxed together, so probe the otg-mux interrupt first,
+ * if not found, then look for the regular interrupts one by one.
+ */
+ rport->otg_mux_irq = of_irq_get_byname(child_np, "otg-mux");
+ if (rport->otg_mux_irq > 0) {
+ ret = devm_request_threaded_irq(rphy->dev, rport->otg_mux_irq,
+ NULL,
+ rockchip_usb2phy_otg_mux_irq,
+ IRQF_ONESHOT,
+ "rockchip_usb2phy_otg",
+ rport);
+ if (ret) {
+ dev_err(rphy->dev,
+ "failed to request otg-mux irq handle\n");
+ return ret;
+ }
+ } else {
+ rport->bvalid_irq = of_irq_get_byname(child_np, "otg-bvalid");
+ if (rport->bvalid_irq < 0) {
+ dev_err(rphy->dev, "no vbus valid irq provided\n");
+ ret = rport->bvalid_irq;
+ return ret;
+ }
+
+ ret = devm_request_threaded_irq(rphy->dev, rport->bvalid_irq,
+ NULL,
+ rockchip_usb2phy_bvalid_irq,
+ IRQF_ONESHOT,
+ "rockchip_usb2phy_bvalid",
+ rport);
+ if (ret) {
+ dev_err(rphy->dev,
+ "failed to request otg-bvalid irq handle\n");
+ return ret;
+ }
+
+ rport->id_irq = of_irq_get_byname(child_np, "otg-id");
+ if (rport->id_irq < 0) {
+ dev_err(rphy->dev, "no otg-id irq provided\n");
+ ret = rport->id_irq;
+ return ret;
+ }
+
+ ret = devm_request_threaded_irq(rphy->dev, rport->id_irq,
+ NULL,
+ rockchip_usb2phy_id_irq,
+ IRQF_ONESHOT,
+ "rockchip_usb2phy_id",
+ rport);
+ if (ret) {
+ dev_err(rphy->dev,
+ "failed to request otg-id irq handle\n");
+ return ret;
+ }
+ }
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int rockchip_usb2phy_host_port_init(struct rockchip_usb2phy *rphy,
+ struct rockchip_usb2phy_port *rport,
+ struct device_node *child_np)
+{
+ int ret;
+
+ rport->port_id = USB2PHY_PORT_HOST;
+ rport->port_cfg = &rphy->phy_cfg->port_cfgs[USB2PHY_PORT_HOST];
+ rport->suspended = true;
+
+ mutex_init(&rport->mutex);
+ INIT_DELAYED_WORK(&rport->sm_work, rockchip_usb2phy_sm_work);
+
+ ret = rockchip_usb2phy_port_irq_init(rphy, rport, child_np);
+ if (ret) {
+ dev_err(rphy->dev, "failed to setup host irq\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int rockchip_otg_event(struct notifier_block *nb,
+ unsigned long event, void *ptr)
+{
+ struct rockchip_usb2phy_port *rport =
+ container_of(nb, struct rockchip_usb2phy_port, event_nb);
+
+ schedule_delayed_work(&rport->otg_sm_work, OTG_SCHEDULE_DELAY);
+
+ return NOTIFY_DONE;
+}
+
+static int rockchip_usb2phy_otg_port_init(struct rockchip_usb2phy *rphy,
+ struct rockchip_usb2phy_port *rport,
+ struct device_node *child_np)
+{
+ int ret, id;
+
+ rport->port_id = USB2PHY_PORT_OTG;
+ rport->port_cfg = &rphy->phy_cfg->port_cfgs[USB2PHY_PORT_OTG];
+ rport->state = OTG_STATE_UNDEFINED;
+
+ /*
+ * set suspended flag to true, but actually don't
+ * put phy in suspend mode, it aims to enable usb
+ * phy and clock in power_on() called by usb controller
+ * driver during probe.
+ */
+ rport->suspended = true;
+ rport->vbus_attached = false;
+
+ mutex_init(&rport->mutex);
+
+ rport->mode = of_usb_get_dr_mode_by_phy(child_np, -1);
+ if (rport->mode == USB_DR_MODE_HOST ||
+ rport->mode == USB_DR_MODE_UNKNOWN) {
+ ret = 0;
+ goto out;
+ }
+
+ INIT_DELAYED_WORK(&rport->chg_work, rockchip_chg_detect_work);
+ INIT_DELAYED_WORK(&rport->otg_sm_work, rockchip_usb2phy_otg_sm_work);
+
+ ret = rockchip_usb2phy_port_irq_init(rphy, rport, child_np);
+ if (ret) {
+ dev_err(rphy->dev, "failed to init irq for host port\n");
+ goto out;
+ }
+
+ if (!IS_ERR(rphy->edev)) {
+ rport->event_nb.notifier_call = rockchip_otg_event;
+
+ ret = devm_extcon_register_notifier(rphy->dev, rphy->edev,
+ EXTCON_USB_HOST, &rport->event_nb);
+ if (ret) {
+ dev_err(rphy->dev, "register USB HOST notifier failed\n");
+ goto out;
+ }
+
+ if (!of_property_read_bool(rphy->dev->of_node, "extcon")) {
+ /* do initial sync of usb state */
+ id = property_enabled(rphy->grf, &rport->port_cfg->utmi_id);
+ extcon_set_state_sync(rphy->edev, EXTCON_USB_HOST, !id);
+ }
+ }
+
+out:
+ return ret;
+}
+
+static int rockchip_usb2phy_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ struct device_node *child_np;
+ struct phy_provider *provider;
+ struct rockchip_usb2phy *rphy;
+ const struct rockchip_usb2phy_cfg *phy_cfgs;
+ unsigned int reg;
+ int index, ret;
+
+ rphy = devm_kzalloc(dev, sizeof(*rphy), GFP_KERNEL);
+ if (!rphy)
+ return -ENOMEM;
+
+ if (!dev->parent || !dev->parent->of_node) {
+ rphy->grf = syscon_regmap_lookup_by_phandle(np, "rockchip,usbgrf");
+ if (IS_ERR(rphy->grf)) {
+ dev_err(dev, "failed to locate usbgrf\n");
+ return PTR_ERR(rphy->grf);
+ }
+ }
+
+ else {
+ rphy->grf = syscon_node_to_regmap(dev->parent->of_node);
+ if (IS_ERR(rphy->grf))
+ return PTR_ERR(rphy->grf);
+ }
+
+ if (of_device_is_compatible(np, "rockchip,rv1108-usb2phy")) {
+ rphy->usbgrf =
+ syscon_regmap_lookup_by_phandle(dev->of_node,
+ "rockchip,usbgrf");
+ if (IS_ERR(rphy->usbgrf))
+ return PTR_ERR(rphy->usbgrf);
+ } else {
+ rphy->usbgrf = NULL;
+ }
+
+ if (of_property_read_u32_index(np, "reg", 0, &reg)) {
+ dev_err(dev, "the reg property is not assigned in %pOFn node\n",
+ np);
+ return -EINVAL;
+ }
+
+ /* support address_cells=2 */
+ if (of_property_count_u32_elems(np, "reg") > 2 && reg == 0) {
+ if (of_property_read_u32_index(np, "reg", 1, &reg)) {
+ dev_err(dev, "the reg property is not assigned in %pOFn node\n",
+ np);
+ return -EINVAL;
+ }
+ }
+
+ rphy->dev = dev;
+ phy_cfgs = device_get_match_data(dev);
+ rphy->chg_state = USB_CHG_STATE_UNDEFINED;
+ rphy->chg_type = POWER_SUPPLY_TYPE_UNKNOWN;
+ rphy->irq = platform_get_irq_optional(pdev, 0);
+ platform_set_drvdata(pdev, rphy);
+
+ if (!phy_cfgs)
+ return dev_err_probe(dev, -EINVAL, "phy configs are not assigned!\n");
+
+ ret = rockchip_usb2phy_extcon_register(rphy);
+ if (ret)
+ return ret;
+
+ /* find out a proper config which can be matched with dt. */
+ index = 0;
+ do {
+ if (phy_cfgs[index].reg == reg) {
+ rphy->phy_cfg = &phy_cfgs[index];
+ break;
+ }
+
+ ++index;
+ } while (phy_cfgs[index].reg);
+
+ if (!rphy->phy_cfg) {
+ dev_err(dev, "could not find phy config for reg=0x%08x\n", reg);
+ return -EINVAL;
+ }
+
+ rphy->phy_reset = devm_reset_control_get_optional(dev, "phy");
+ if (IS_ERR(rphy->phy_reset))
+ return PTR_ERR(rphy->phy_reset);
+
+ rphy->clk = devm_clk_get_optional_enabled(dev, "phyclk");
+ if (IS_ERR(rphy->clk)) {
+ return dev_err_probe(&pdev->dev, PTR_ERR(rphy->clk),
+ "failed to get phyclk\n");
+ }
+
+ ret = rockchip_usb2phy_clk480m_register(rphy);
+ if (ret) {
+ dev_err(dev, "failed to register 480m output clock\n");
+ return ret;
+ }
+
+ if (rphy->phy_cfg->phy_tuning) {
+ ret = rphy->phy_cfg->phy_tuning(rphy);
+ if (ret)
+ return ret;
+ }
+
+ index = 0;
+ for_each_available_child_of_node(np, child_np) {
+ struct rockchip_usb2phy_port *rport = &rphy->ports[index];
+ struct phy *phy;
+
+ /* This driver aims to support both otg-port and host-port */
+ if (!of_node_name_eq(child_np, "host-port") &&
+ !of_node_name_eq(child_np, "otg-port"))
+ goto next_child;
+
+ phy = devm_phy_create(dev, child_np, &rockchip_usb2phy_ops);
+ if (IS_ERR(phy)) {
+ dev_err_probe(dev, PTR_ERR(phy), "failed to create phy\n");
+ ret = PTR_ERR(phy);
+ goto put_child;
+ }
+
+ rport->phy = phy;
+ phy_set_drvdata(rport->phy, rport);
+
+ /* initialize otg/host port separately */
+ if (of_node_name_eq(child_np, "host-port")) {
+ ret = rockchip_usb2phy_host_port_init(rphy, rport,
+ child_np);
+ if (ret)
+ goto put_child;
+ } else {
+ ret = rockchip_usb2phy_otg_port_init(rphy, rport,
+ child_np);
+ if (ret)
+ goto put_child;
+ }
+
+next_child:
+ /* to prevent out of boundary */
+ if (++index >= rphy->phy_cfg->num_ports) {
+ of_node_put(child_np);
+ break;
+ }
+ }
+
+ provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+ if (rphy->irq > 0) {
+ ret = devm_request_threaded_irq(rphy->dev, rphy->irq, NULL,
+ rockchip_usb2phy_irq,
+ IRQF_ONESHOT,
+ "rockchip_usb2phy",
+ rphy);
+ if (ret) {
+ dev_err(rphy->dev,
+ "failed to request usb2phy irq handle\n");
+ goto put_child;
+ }
+ }
+
+ return PTR_ERR_OR_ZERO(provider);
+
+put_child:
+ of_node_put(child_np);
+ return ret;
+}
+
+static int rk3588_usb2phy_tuning(struct rockchip_usb2phy *rphy)
+{
+ int ret;
+ bool usb3otg = false;
+ /*
+ * utmi_termselect = 1'b1 (en FS terminations)
+ * utmi_xcvrselect = 2'b01 (FS transceiver)
+ */
+ int suspend_cfg = 0x14;
+
+ if (rphy->phy_cfg->reg == 0x0000 || rphy->phy_cfg->reg == 0x4000) {
+ /* USB2 config for USB3_0 and USB3_1 */
+ suspend_cfg |= 0x01; /* utmi_opmode = 2'b01 (no-driving) */
+ usb3otg = true;
+ } else if (rphy->phy_cfg->reg == 0x8000 || rphy->phy_cfg->reg == 0xc000) {
+ /* USB2 config for USB2_0 and USB2_1 */
+ suspend_cfg |= 0x00; /* utmi_opmode = 2'b00 (normal) */
+ } else {
+ return -EINVAL;
+ }
+
+ /* Deassert SIDDQ to power on analog block */
+ ret = regmap_write(rphy->grf, 0x0008, GENMASK(29, 29) | 0x0000);
+ if (ret)
+ return ret;
+
+ /* Do reset after exit IDDQ mode */
+ ret = rockchip_usb2phy_reset(rphy);
+ if (ret)
+ return ret;
+
+ /* suspend configuration */
+ ret |= regmap_write(rphy->grf, 0x000c, GENMASK(20, 16) | suspend_cfg);
+
+ /* HS DC Voltage Level Adjustment 4'b1001 : +5.89% */
+ ret |= regmap_write(rphy->grf, 0x0004, GENMASK(27, 24) | 0x0900);
+
+ /* HS Transmitter Pre-Emphasis Current Control 2'b10 : 2x */
+ ret |= regmap_write(rphy->grf, 0x0008, GENMASK(20, 19) | 0x0010);
+
+ if (!usb3otg)
+ return ret;
+
+ /* Pullup iddig pin for USB3_0 OTG mode */
+ ret |= regmap_write(rphy->grf, 0x0010, GENMASK(17, 16) | 0x0003);
+
+ return ret;
+}
+
+static const struct rockchip_usb2phy_cfg rk3228_phy_cfgs[] = {
+ {
+ .reg = 0x760,
+ .num_ports = 2,
+ .clkout_ctl = { 0x0768, 4, 4, 1, 0 },
+ .port_cfgs = {
+ [USB2PHY_PORT_OTG] = {
+ .phy_sus = { 0x0760, 15, 0, 0, 0x1d1 },
+ .bvalid_det_en = { 0x0680, 3, 3, 0, 1 },
+ .bvalid_det_st = { 0x0690, 3, 3, 0, 1 },
+ .bvalid_det_clr = { 0x06a0, 3, 3, 0, 1 },
+ .id_det_en = { 0x0680, 6, 5, 0, 3 },
+ .id_det_st = { 0x0690, 6, 5, 0, 3 },
+ .id_det_clr = { 0x06a0, 6, 5, 0, 3 },
+ .ls_det_en = { 0x0680, 2, 2, 0, 1 },
+ .ls_det_st = { 0x0690, 2, 2, 0, 1 },
+ .ls_det_clr = { 0x06a0, 2, 2, 0, 1 },
+ .utmi_bvalid = { 0x0480, 4, 4, 0, 1 },
+ .utmi_id = { 0x0480, 1, 1, 0, 1 },
+ .utmi_ls = { 0x0480, 3, 2, 0, 1 },
+ },
+ [USB2PHY_PORT_HOST] = {
+ .phy_sus = { 0x0764, 15, 0, 0, 0x1d1 },
+ .ls_det_en = { 0x0680, 4, 4, 0, 1 },
+ .ls_det_st = { 0x0690, 4, 4, 0, 1 },
+ .ls_det_clr = { 0x06a0, 4, 4, 0, 1 }
+ }
+ },
+ .chg_det = {
+ .opmode = { 0x0760, 3, 0, 5, 1 },
+ .cp_det = { 0x0884, 4, 4, 0, 1 },
+ .dcp_det = { 0x0884, 3, 3, 0, 1 },
+ .dp_det = { 0x0884, 5, 5, 0, 1 },
+ .idm_sink_en = { 0x0768, 8, 8, 0, 1 },
+ .idp_sink_en = { 0x0768, 7, 7, 0, 1 },
+ .idp_src_en = { 0x0768, 9, 9, 0, 1 },
+ .rdm_pdwn_en = { 0x0768, 10, 10, 0, 1 },
+ .vdm_src_en = { 0x0768, 12, 12, 0, 1 },
+ .vdp_src_en = { 0x0768, 11, 11, 0, 1 },
+ },
+ },
+ {
+ .reg = 0x800,
+ .num_ports = 2,
+ .clkout_ctl = { 0x0808, 4, 4, 1, 0 },
+ .port_cfgs = {
+ [USB2PHY_PORT_OTG] = {
+ .phy_sus = { 0x800, 15, 0, 0, 0x1d1 },
+ .ls_det_en = { 0x0684, 0, 0, 0, 1 },
+ .ls_det_st = { 0x0694, 0, 0, 0, 1 },
+ .ls_det_clr = { 0x06a4, 0, 0, 0, 1 }
+ },
+ [USB2PHY_PORT_HOST] = {
+ .phy_sus = { 0x804, 15, 0, 0, 0x1d1 },
+ .ls_det_en = { 0x0684, 1, 1, 0, 1 },
+ .ls_det_st = { 0x0694, 1, 1, 0, 1 },
+ .ls_det_clr = { 0x06a4, 1, 1, 0, 1 }
+ }
+ },
+ },
+ { /* sentinel */ }
+};
+
+static const struct rockchip_usb2phy_cfg rk3308_phy_cfgs[] = {
+ {
+ .reg = 0x100,
+ .num_ports = 2,
+ .clkout_ctl = { 0x108, 4, 4, 1, 0 },
+ .port_cfgs = {
+ [USB2PHY_PORT_OTG] = {
+ .phy_sus = { 0x0100, 8, 0, 0, 0x1d1 },
+ .bvalid_det_en = { 0x3020, 3, 2, 0, 3 },
+ .bvalid_det_st = { 0x3024, 3, 2, 0, 3 },
+ .bvalid_det_clr = { 0x3028, 3, 2, 0, 3 },
+ .id_det_en = { 0x3020, 5, 4, 0, 3 },
+ .id_det_st = { 0x3024, 5, 4, 0, 3 },
+ .id_det_clr = { 0x3028, 5, 4, 0, 3 },
+ .ls_det_en = { 0x3020, 0, 0, 0, 1 },
+ .ls_det_st = { 0x3024, 0, 0, 0, 1 },
+ .ls_det_clr = { 0x3028, 0, 0, 0, 1 },
+ .utmi_avalid = { 0x0120, 10, 10, 0, 1 },
+ .utmi_bvalid = { 0x0120, 9, 9, 0, 1 },
+ .utmi_id = { 0x0120, 6, 6, 0, 1 },
+ .utmi_ls = { 0x0120, 5, 4, 0, 1 },
+ },
+ [USB2PHY_PORT_HOST] = {
+ .phy_sus = { 0x0104, 8, 0, 0, 0x1d1 },
+ .ls_det_en = { 0x3020, 1, 1, 0, 1 },
+ .ls_det_st = { 0x3024, 1, 1, 0, 1 },
+ .ls_det_clr = { 0x3028, 1, 1, 0, 1 },
+ .utmi_ls = { 0x0120, 17, 16, 0, 1 },
+ .utmi_hstdet = { 0x0120, 19, 19, 0, 1 }
+ }
+ },
+ .chg_det = {
+ .opmode = { 0x0100, 3, 0, 5, 1 },
+ .cp_det = { 0x0120, 24, 24, 0, 1 },
+ .dcp_det = { 0x0120, 23, 23, 0, 1 },
+ .dp_det = { 0x0120, 25, 25, 0, 1 },
+ .idm_sink_en = { 0x0108, 8, 8, 0, 1 },
+ .idp_sink_en = { 0x0108, 7, 7, 0, 1 },
+ .idp_src_en = { 0x0108, 9, 9, 0, 1 },
+ .rdm_pdwn_en = { 0x0108, 10, 10, 0, 1 },
+ .vdm_src_en = { 0x0108, 12, 12, 0, 1 },
+ .vdp_src_en = { 0x0108, 11, 11, 0, 1 },
+ },
+ },
+ { /* sentinel */ }
+};
+
+static const struct rockchip_usb2phy_cfg rk3328_phy_cfgs[] = {
+ {
+ .reg = 0x100,
+ .num_ports = 2,
+ .clkout_ctl = { 0x108, 4, 4, 1, 0 },
+ .port_cfgs = {
+ [USB2PHY_PORT_OTG] = {
+ .phy_sus = { 0x0100, 15, 0, 0, 0x1d1 },
+ .bvalid_det_en = { 0x0110, 3, 2, 0, 3 },
+ .bvalid_det_st = { 0x0114, 3, 2, 0, 3 },
+ .bvalid_det_clr = { 0x0118, 3, 2, 0, 3 },
+ .id_det_en = { 0x0110, 5, 4, 0, 3 },
+ .id_det_st = { 0x0114, 5, 4, 0, 3 },
+ .id_det_clr = { 0x0118, 5, 4, 0, 3 },
+ .ls_det_en = { 0x0110, 0, 0, 0, 1 },
+ .ls_det_st = { 0x0114, 0, 0, 0, 1 },
+ .ls_det_clr = { 0x0118, 0, 0, 0, 1 },
+ .utmi_avalid = { 0x0120, 10, 10, 0, 1 },
+ .utmi_bvalid = { 0x0120, 9, 9, 0, 1 },
+ .utmi_id = { 0x0120, 6, 6, 0, 1 },
+ .utmi_ls = { 0x0120, 5, 4, 0, 1 },
+ },
+ [USB2PHY_PORT_HOST] = {
+ .phy_sus = { 0x104, 15, 0, 0, 0x1d1 },
+ .ls_det_en = { 0x110, 1, 1, 0, 1 },
+ .ls_det_st = { 0x114, 1, 1, 0, 1 },
+ .ls_det_clr = { 0x118, 1, 1, 0, 1 },
+ .utmi_ls = { 0x120, 17, 16, 0, 1 },
+ .utmi_hstdet = { 0x120, 19, 19, 0, 1 }
+ }
+ },
+ .chg_det = {
+ .opmode = { 0x0100, 3, 0, 5, 1 },
+ .cp_det = { 0x0120, 24, 24, 0, 1 },
+ .dcp_det = { 0x0120, 23, 23, 0, 1 },
+ .dp_det = { 0x0120, 25, 25, 0, 1 },
+ .idm_sink_en = { 0x0108, 8, 8, 0, 1 },
+ .idp_sink_en = { 0x0108, 7, 7, 0, 1 },
+ .idp_src_en = { 0x0108, 9, 9, 0, 1 },
+ .rdm_pdwn_en = { 0x0108, 10, 10, 0, 1 },
+ .vdm_src_en = { 0x0108, 12, 12, 0, 1 },
+ .vdp_src_en = { 0x0108, 11, 11, 0, 1 },
+ },
+ },
+ { /* sentinel */ }
+};
+
+static const struct rockchip_usb2phy_cfg rk3366_phy_cfgs[] = {
+ {
+ .reg = 0x700,
+ .num_ports = 2,
+ .clkout_ctl = { 0x0724, 15, 15, 1, 0 },
+ .port_cfgs = {
+ [USB2PHY_PORT_HOST] = {
+ .phy_sus = { 0x0728, 15, 0, 0, 0x1d1 },
+ .ls_det_en = { 0x0680, 4, 4, 0, 1 },
+ .ls_det_st = { 0x0690, 4, 4, 0, 1 },
+ .ls_det_clr = { 0x06a0, 4, 4, 0, 1 },
+ .utmi_ls = { 0x049c, 14, 13, 0, 1 },
+ .utmi_hstdet = { 0x049c, 12, 12, 0, 1 }
+ }
+ },
+ },
+ { /* sentinel */ }
+};
+
+static const struct rockchip_usb2phy_cfg rk3399_phy_cfgs[] = {
+ {
+ .reg = 0xe450,
+ .num_ports = 2,
+ .clkout_ctl = { 0xe450, 4, 4, 1, 0 },
+ .port_cfgs = {
+ [USB2PHY_PORT_OTG] = {
+ .phy_sus = { 0xe454, 1, 0, 2, 1 },
+ .bvalid_det_en = { 0xe3c0, 3, 3, 0, 1 },
+ .bvalid_det_st = { 0xe3e0, 3, 3, 0, 1 },
+ .bvalid_det_clr = { 0xe3d0, 3, 3, 0, 1 },
+ .id_det_en = { 0xe3c0, 5, 4, 0, 3 },
+ .id_det_st = { 0xe3e0, 5, 4, 0, 3 },
+ .id_det_clr = { 0xe3d0, 5, 4, 0, 3 },
+ .utmi_avalid = { 0xe2ac, 7, 7, 0, 1 },
+ .utmi_bvalid = { 0xe2ac, 12, 12, 0, 1 },
+ .utmi_id = { 0xe2ac, 8, 8, 0, 1 },
+ },
+ [USB2PHY_PORT_HOST] = {
+ .phy_sus = { 0xe458, 1, 0, 0x2, 0x1 },
+ .ls_det_en = { 0xe3c0, 6, 6, 0, 1 },
+ .ls_det_st = { 0xe3e0, 6, 6, 0, 1 },
+ .ls_det_clr = { 0xe3d0, 6, 6, 0, 1 },
+ .utmi_ls = { 0xe2ac, 22, 21, 0, 1 },
+ .utmi_hstdet = { 0xe2ac, 23, 23, 0, 1 }
+ }
+ },
+ .chg_det = {
+ .opmode = { 0xe454, 3, 0, 5, 1 },
+ .cp_det = { 0xe2ac, 2, 2, 0, 1 },
+ .dcp_det = { 0xe2ac, 1, 1, 0, 1 },
+ .dp_det = { 0xe2ac, 0, 0, 0, 1 },
+ .idm_sink_en = { 0xe450, 8, 8, 0, 1 },
+ .idp_sink_en = { 0xe450, 7, 7, 0, 1 },
+ .idp_src_en = { 0xe450, 9, 9, 0, 1 },
+ .rdm_pdwn_en = { 0xe450, 10, 10, 0, 1 },
+ .vdm_src_en = { 0xe450, 12, 12, 0, 1 },
+ .vdp_src_en = { 0xe450, 11, 11, 0, 1 },
+ },
+ },
+ {
+ .reg = 0xe460,
+ .num_ports = 2,
+ .clkout_ctl = { 0xe460, 4, 4, 1, 0 },
+ .port_cfgs = {
+ [USB2PHY_PORT_OTG] = {
+ .phy_sus = { 0xe464, 1, 0, 2, 1 },
+ .bvalid_det_en = { 0xe3c0, 8, 8, 0, 1 },
+ .bvalid_det_st = { 0xe3e0, 8, 8, 0, 1 },
+ .bvalid_det_clr = { 0xe3d0, 8, 8, 0, 1 },
+ .id_det_en = { 0xe3c0, 10, 9, 0, 3 },
+ .id_det_st = { 0xe3e0, 10, 9, 0, 3 },
+ .id_det_clr = { 0xe3d0, 10, 9, 0, 3 },
+ .utmi_avalid = { 0xe2ac, 10, 10, 0, 1 },
+ .utmi_bvalid = { 0xe2ac, 16, 16, 0, 1 },
+ .utmi_id = { 0xe2ac, 11, 11, 0, 1 },
+ },
+ [USB2PHY_PORT_HOST] = {
+ .phy_sus = { 0xe468, 1, 0, 0x2, 0x1 },
+ .ls_det_en = { 0xe3c0, 11, 11, 0, 1 },
+ .ls_det_st = { 0xe3e0, 11, 11, 0, 1 },
+ .ls_det_clr = { 0xe3d0, 11, 11, 0, 1 },
+ .utmi_ls = { 0xe2ac, 26, 25, 0, 1 },
+ .utmi_hstdet = { 0xe2ac, 27, 27, 0, 1 }
+ }
+ },
+ },
+ { /* sentinel */ }
+};
+
+static const struct rockchip_usb2phy_cfg rk3568_phy_cfgs[] = {
+ {
+ .reg = 0xfe8a0000,
+ .num_ports = 2,
+ .clkout_ctl = { 0x0008, 4, 4, 1, 0 },
+ .port_cfgs = {
+ [USB2PHY_PORT_OTG] = {
+ .phy_sus = { 0x0000, 8, 0, 0, 0x1d1 },
+ .bvalid_det_en = { 0x0080, 3, 2, 0, 3 },
+ .bvalid_det_st = { 0x0084, 3, 2, 0, 3 },
+ .bvalid_det_clr = { 0x0088, 3, 2, 0, 3 },
+ .id_det_en = { 0x0080, 5, 4, 0, 3 },
+ .id_det_st = { 0x0084, 5, 4, 0, 3 },
+ .id_det_clr = { 0x0088, 5, 4, 0, 3 },
+ .utmi_avalid = { 0x00c0, 10, 10, 0, 1 },
+ .utmi_bvalid = { 0x00c0, 9, 9, 0, 1 },
+ .utmi_id = { 0x00c0, 6, 6, 0, 1 },
+ },
+ [USB2PHY_PORT_HOST] = {
+ /* Select suspend control from controller */
+ .phy_sus = { 0x0004, 8, 0, 0x1d2, 0x1d2 },
+ .ls_det_en = { 0x0080, 1, 1, 0, 1 },
+ .ls_det_st = { 0x0084, 1, 1, 0, 1 },
+ .ls_det_clr = { 0x0088, 1, 1, 0, 1 },
+ .utmi_ls = { 0x00c0, 17, 16, 0, 1 },
+ .utmi_hstdet = { 0x00c0, 19, 19, 0, 1 }
+ }
+ },
+ .chg_det = {
+ .opmode = { 0x0000, 3, 0, 5, 1 },
+ .cp_det = { 0x00c0, 24, 24, 0, 1 },
+ .dcp_det = { 0x00c0, 23, 23, 0, 1 },
+ .dp_det = { 0x00c0, 25, 25, 0, 1 },
+ .idm_sink_en = { 0x0008, 8, 8, 0, 1 },
+ .idp_sink_en = { 0x0008, 7, 7, 0, 1 },
+ .idp_src_en = { 0x0008, 9, 9, 0, 1 },
+ .rdm_pdwn_en = { 0x0008, 10, 10, 0, 1 },
+ .vdm_src_en = { 0x0008, 12, 12, 0, 1 },
+ .vdp_src_en = { 0x0008, 11, 11, 0, 1 },
+ },
+ },
+ {
+ .reg = 0xfe8b0000,
+ .num_ports = 2,
+ .clkout_ctl = { 0x0008, 4, 4, 1, 0 },
+ .port_cfgs = {
+ [USB2PHY_PORT_OTG] = {
+ .phy_sus = { 0x0000, 8, 0, 0x1d2, 0x1d1 },
+ .ls_det_en = { 0x0080, 0, 0, 0, 1 },
+ .ls_det_st = { 0x0084, 0, 0, 0, 1 },
+ .ls_det_clr = { 0x0088, 0, 0, 0, 1 },
+ .utmi_ls = { 0x00c0, 5, 4, 0, 1 },
+ .utmi_hstdet = { 0x00c0, 7, 7, 0, 1 }
+ },
+ [USB2PHY_PORT_HOST] = {
+ .phy_sus = { 0x0004, 8, 0, 0x1d2, 0x1d1 },
+ .ls_det_en = { 0x0080, 1, 1, 0, 1 },
+ .ls_det_st = { 0x0084, 1, 1, 0, 1 },
+ .ls_det_clr = { 0x0088, 1, 1, 0, 1 },
+ .utmi_ls = { 0x00c0, 17, 16, 0, 1 },
+ .utmi_hstdet = { 0x00c0, 19, 19, 0, 1 }
+ }
+ },
+ },
+ { /* sentinel */ }
+};
+
+static const struct rockchip_usb2phy_cfg rk3588_phy_cfgs[] = {
+ {
+ .reg = 0x0000,
+ .num_ports = 1,
+ .phy_tuning = rk3588_usb2phy_tuning,
+ .clkout_ctl = { 0x0000, 0, 0, 1, 0 },
+ .port_cfgs = {
+ [USB2PHY_PORT_OTG] = {
+ .phy_sus = { 0x000c, 11, 11, 0, 1 },
+ .bvalid_det_en = { 0x0080, 1, 1, 0, 1 },
+ .bvalid_det_st = { 0x0084, 1, 1, 0, 1 },
+ .bvalid_det_clr = { 0x0088, 1, 1, 0, 1 },
+ .ls_det_en = { 0x0080, 0, 0, 0, 1 },
+ .ls_det_st = { 0x0084, 0, 0, 0, 1 },
+ .ls_det_clr = { 0x0088, 0, 0, 0, 1 },
+ .disfall_en = { 0x0080, 6, 6, 0, 1 },
+ .disfall_st = { 0x0084, 6, 6, 0, 1 },
+ .disfall_clr = { 0x0088, 6, 6, 0, 1 },
+ .disrise_en = { 0x0080, 5, 5, 0, 1 },
+ .disrise_st = { 0x0084, 5, 5, 0, 1 },
+ .disrise_clr = { 0x0088, 5, 5, 0, 1 },
+ .utmi_avalid = { 0x00c0, 7, 7, 0, 1 },
+ .utmi_bvalid = { 0x00c0, 6, 6, 0, 1 },
+ .utmi_ls = { 0x00c0, 10, 9, 0, 1 },
+ }
+ },
+ .chg_det = {
+ .cp_det = { 0x00c0, 0, 0, 0, 1 },
+ .dcp_det = { 0x00c0, 0, 0, 0, 1 },
+ .dp_det = { 0x00c0, 1, 1, 1, 0 },
+ .idm_sink_en = { 0x0008, 5, 5, 1, 0 },
+ .idp_sink_en = { 0x0008, 5, 5, 0, 1 },
+ .idp_src_en = { 0x0008, 14, 14, 0, 1 },
+ .rdm_pdwn_en = { 0x0008, 14, 14, 0, 1 },
+ .vdm_src_en = { 0x0008, 7, 6, 0, 3 },
+ .vdp_src_en = { 0x0008, 7, 6, 0, 3 },
+ },
+ },
+ {
+ .reg = 0x4000,
+ .num_ports = 1,
+ .phy_tuning = rk3588_usb2phy_tuning,
+ .clkout_ctl = { 0x0000, 0, 0, 1, 0 },
+ .port_cfgs = {
+ [USB2PHY_PORT_OTG] = {
+ .phy_sus = { 0x000c, 11, 11, 0, 1 },
+ .bvalid_det_en = { 0x0080, 1, 1, 0, 1 },
+ .bvalid_det_st = { 0x0084, 1, 1, 0, 1 },
+ .bvalid_det_clr = { 0x0088, 1, 1, 0, 1 },
+ .ls_det_en = { 0x0080, 0, 0, 0, 1 },
+ .ls_det_st = { 0x0084, 0, 0, 0, 1 },
+ .ls_det_clr = { 0x0088, 0, 0, 0, 1 },
+ .disfall_en = { 0x0080, 6, 6, 0, 1 },
+ .disfall_st = { 0x0084, 6, 6, 0, 1 },
+ .disfall_clr = { 0x0088, 6, 6, 0, 1 },
+ .disrise_en = { 0x0080, 5, 5, 0, 1 },
+ .disrise_st = { 0x0084, 5, 5, 0, 1 },
+ .disrise_clr = { 0x0088, 5, 5, 0, 1 },
+ .utmi_avalid = { 0x00c0, 7, 7, 0, 1 },
+ .utmi_bvalid = { 0x00c0, 6, 6, 0, 1 },
+ .utmi_ls = { 0x00c0, 10, 9, 0, 1 },
+ }
+ },
+ .chg_det = {
+ .cp_det = { 0x00c0, 0, 0, 0, 1 },
+ .dcp_det = { 0x00c0, 0, 0, 0, 1 },
+ .dp_det = { 0x00c0, 1, 1, 1, 0 },
+ .idm_sink_en = { 0x0008, 5, 5, 1, 0 },
+ .idp_sink_en = { 0x0008, 5, 5, 0, 1 },
+ .idp_src_en = { 0x0008, 14, 14, 0, 1 },
+ .rdm_pdwn_en = { 0x0008, 14, 14, 0, 1 },
+ .vdm_src_en = { 0x0008, 7, 6, 0, 3 },
+ .vdp_src_en = { 0x0008, 7, 6, 0, 3 },
+ },
+ },
+ {
+ .reg = 0x8000,
+ .num_ports = 1,
+ .phy_tuning = rk3588_usb2phy_tuning,
+ .clkout_ctl = { 0x0000, 0, 0, 1, 0 },
+ .port_cfgs = {
+ [USB2PHY_PORT_HOST] = {
+ .phy_sus = { 0x0008, 2, 2, 0, 1 },
+ .ls_det_en = { 0x0080, 0, 0, 0, 1 },
+ .ls_det_st = { 0x0084, 0, 0, 0, 1 },
+ .ls_det_clr = { 0x0088, 0, 0, 0, 1 },
+ .disfall_en = { 0x0080, 6, 6, 0, 1 },
+ .disfall_st = { 0x0084, 6, 6, 0, 1 },
+ .disfall_clr = { 0x0088, 6, 6, 0, 1 },
+ .disrise_en = { 0x0080, 5, 5, 0, 1 },
+ .disrise_st = { 0x0084, 5, 5, 0, 1 },
+ .disrise_clr = { 0x0088, 5, 5, 0, 1 },
+ .utmi_ls = { 0x00c0, 10, 9, 0, 1 },
+ }
+ },
+ },
+ {
+ .reg = 0xc000,
+ .num_ports = 1,
+ .phy_tuning = rk3588_usb2phy_tuning,
+ .clkout_ctl = { 0x0000, 0, 0, 1, 0 },
+ .port_cfgs = {
+ [USB2PHY_PORT_HOST] = {
+ .phy_sus = { 0x0008, 2, 2, 0, 1 },
+ .ls_det_en = { 0x0080, 0, 0, 0, 1 },
+ .ls_det_st = { 0x0084, 0, 0, 0, 1 },
+ .ls_det_clr = { 0x0088, 0, 0, 0, 1 },
+ .disfall_en = { 0x0080, 6, 6, 0, 1 },
+ .disfall_st = { 0x0084, 6, 6, 0, 1 },
+ .disfall_clr = { 0x0088, 6, 6, 0, 1 },
+ .disrise_en = { 0x0080, 5, 5, 0, 1 },
+ .disrise_st = { 0x0084, 5, 5, 0, 1 },
+ .disrise_clr = { 0x0088, 5, 5, 0, 1 },
+ .utmi_ls = { 0x00c0, 10, 9, 0, 1 },
+ }
+ },
+ },
+ { /* sentinel */ }
+};
+
+static const struct rockchip_usb2phy_cfg rv1108_phy_cfgs[] = {
+ {
+ .reg = 0x100,
+ .num_ports = 2,
+ .clkout_ctl = { 0x108, 4, 4, 1, 0 },
+ .port_cfgs = {
+ [USB2PHY_PORT_OTG] = {
+ .phy_sus = { 0x0100, 15, 0, 0, 0x1d1 },
+ .bvalid_det_en = { 0x0680, 3, 3, 0, 1 },
+ .bvalid_det_st = { 0x0690, 3, 3, 0, 1 },
+ .bvalid_det_clr = { 0x06a0, 3, 3, 0, 1 },
+ .ls_det_en = { 0x0680, 2, 2, 0, 1 },
+ .ls_det_st = { 0x0690, 2, 2, 0, 1 },
+ .ls_det_clr = { 0x06a0, 2, 2, 0, 1 },
+ .utmi_bvalid = { 0x0804, 10, 10, 0, 1 },
+ .utmi_ls = { 0x0804, 13, 12, 0, 1 },
+ },
+ [USB2PHY_PORT_HOST] = {
+ .phy_sus = { 0x0104, 15, 0, 0, 0x1d1 },
+ .ls_det_en = { 0x0680, 4, 4, 0, 1 },
+ .ls_det_st = { 0x0690, 4, 4, 0, 1 },
+ .ls_det_clr = { 0x06a0, 4, 4, 0, 1 },
+ .utmi_ls = { 0x0804, 9, 8, 0, 1 },
+ .utmi_hstdet = { 0x0804, 7, 7, 0, 1 }
+ }
+ },
+ .chg_det = {
+ .opmode = { 0x0100, 3, 0, 5, 1 },
+ .cp_det = { 0x0804, 1, 1, 0, 1 },
+ .dcp_det = { 0x0804, 0, 0, 0, 1 },
+ .dp_det = { 0x0804, 2, 2, 0, 1 },
+ .idm_sink_en = { 0x0108, 8, 8, 0, 1 },
+ .idp_sink_en = { 0x0108, 7, 7, 0, 1 },
+ .idp_src_en = { 0x0108, 9, 9, 0, 1 },
+ .rdm_pdwn_en = { 0x0108, 10, 10, 0, 1 },
+ .vdm_src_en = { 0x0108, 12, 12, 0, 1 },
+ .vdp_src_en = { 0x0108, 11, 11, 0, 1 },
+ },
+ },
+ { /* sentinel */ }
+};
+
+static const struct of_device_id rockchip_usb2phy_dt_match[] = {
+ { .compatible = "rockchip,px30-usb2phy", .data = &rk3328_phy_cfgs },
+ { .compatible = "rockchip,rk3228-usb2phy", .data = &rk3228_phy_cfgs },
+ { .compatible = "rockchip,rk3308-usb2phy", .data = &rk3308_phy_cfgs },
+ { .compatible = "rockchip,rk3328-usb2phy", .data = &rk3328_phy_cfgs },
+ { .compatible = "rockchip,rk3366-usb2phy", .data = &rk3366_phy_cfgs },
+ { .compatible = "rockchip,rk3399-usb2phy", .data = &rk3399_phy_cfgs },
+ { .compatible = "rockchip,rk3568-usb2phy", .data = &rk3568_phy_cfgs },
+ { .compatible = "rockchip,rk3588-usb2phy", .data = &rk3588_phy_cfgs },
+ { .compatible = "rockchip,rv1108-usb2phy", .data = &rv1108_phy_cfgs },
+ {}
+};
+MODULE_DEVICE_TABLE(of, rockchip_usb2phy_dt_match);
+
+static struct platform_driver rockchip_usb2phy_driver = {
+ .probe = rockchip_usb2phy_probe,
+ .driver = {
+ .name = "rockchip-usb2phy",
+ .of_match_table = rockchip_usb2phy_dt_match,
+ },
+};
+module_platform_driver(rockchip_usb2phy_driver);
+
+MODULE_AUTHOR("Frank Wang <frank.wang@rock-chips.com>");
+MODULE_DESCRIPTION("Rockchip USB2.0 PHY driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c b/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c
new file mode 100644
index 0000000000..5de5e2e97f
--- /dev/null
+++ b/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c
@@ -0,0 +1,766 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Rockchip PIPE USB3.0 PCIE SATA Combo Phy driver
+ *
+ * Copyright (C) 2021 Rockchip Electronics Co., Ltd.
+ */
+
+#include <dt-bindings/phy/phy.h>
+#include <linux/clk.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include <linux/units.h>
+
+#define BIT_WRITEABLE_SHIFT 16
+#define REF_CLOCK_24MHz (24 * HZ_PER_MHZ)
+#define REF_CLOCK_25MHz (25 * HZ_PER_MHZ)
+#define REF_CLOCK_100MHz (100 * HZ_PER_MHZ)
+
+/* COMBO PHY REG */
+#define PHYREG6 0x14
+#define PHYREG6_PLL_DIV_MASK GENMASK(7, 6)
+#define PHYREG6_PLL_DIV_SHIFT 6
+#define PHYREG6_PLL_DIV_2 1
+
+#define PHYREG7 0x18
+#define PHYREG7_TX_RTERM_MASK GENMASK(7, 4)
+#define PHYREG7_TX_RTERM_SHIFT 4
+#define PHYREG7_TX_RTERM_50OHM 8
+#define PHYREG7_RX_RTERM_MASK GENMASK(3, 0)
+#define PHYREG7_RX_RTERM_SHIFT 0
+#define PHYREG7_RX_RTERM_44OHM 15
+
+#define PHYREG8 0x1C
+#define PHYREG8_SSC_EN BIT(4)
+
+#define PHYREG11 0x28
+#define PHYREG11_SU_TRIM_0_7 0xF0
+
+#define PHYREG12 0x2C
+#define PHYREG12_PLL_LPF_ADJ_VALUE 4
+
+#define PHYREG13 0x30
+#define PHYREG13_RESISTER_MASK GENMASK(5, 4)
+#define PHYREG13_RESISTER_SHIFT 0x4
+#define PHYREG13_RESISTER_HIGH_Z 3
+#define PHYREG13_CKRCV_AMP0 BIT(7)
+
+#define PHYREG14 0x34
+#define PHYREG14_CKRCV_AMP1 BIT(0)
+
+#define PHYREG15 0x38
+#define PHYREG15_CTLE_EN BIT(0)
+#define PHYREG15_SSC_CNT_MASK GENMASK(7, 6)
+#define PHYREG15_SSC_CNT_SHIFT 6
+#define PHYREG15_SSC_CNT_VALUE 1
+
+#define PHYREG16 0x3C
+#define PHYREG16_SSC_CNT_VALUE 0x5f
+
+#define PHYREG18 0x44
+#define PHYREG18_PLL_LOOP 0x32
+
+#define PHYREG27 0x6C
+#define PHYREG27_RX_TRIM_RK3588 0x4C
+
+#define PHYREG32 0x7C
+#define PHYREG32_SSC_MASK GENMASK(7, 4)
+#define PHYREG32_SSC_DIR_SHIFT 4
+#define PHYREG32_SSC_UPWARD 0
+#define PHYREG32_SSC_DOWNWARD 1
+#define PHYREG32_SSC_OFFSET_SHIFT 6
+#define PHYREG32_SSC_OFFSET_500PPM 1
+
+#define PHYREG33 0x80
+#define PHYREG33_PLL_KVCO_MASK GENMASK(4, 2)
+#define PHYREG33_PLL_KVCO_SHIFT 2
+#define PHYREG33_PLL_KVCO_VALUE 2
+
+struct rockchip_combphy_priv;
+
+struct combphy_reg {
+ u16 offset;
+ u16 bitend;
+ u16 bitstart;
+ u16 disable;
+ u16 enable;
+};
+
+struct rockchip_combphy_grfcfg {
+ struct combphy_reg pcie_mode_set;
+ struct combphy_reg usb_mode_set;
+ struct combphy_reg sgmii_mode_set;
+ struct combphy_reg qsgmii_mode_set;
+ struct combphy_reg pipe_rxterm_set;
+ struct combphy_reg pipe_txelec_set;
+ struct combphy_reg pipe_txcomp_set;
+ struct combphy_reg pipe_clk_25m;
+ struct combphy_reg pipe_clk_100m;
+ struct combphy_reg pipe_phymode_sel;
+ struct combphy_reg pipe_rate_sel;
+ struct combphy_reg pipe_rxterm_sel;
+ struct combphy_reg pipe_txelec_sel;
+ struct combphy_reg pipe_txcomp_sel;
+ struct combphy_reg pipe_clk_ext;
+ struct combphy_reg pipe_sel_usb;
+ struct combphy_reg pipe_sel_qsgmii;
+ struct combphy_reg pipe_phy_status;
+ struct combphy_reg con0_for_pcie;
+ struct combphy_reg con1_for_pcie;
+ struct combphy_reg con2_for_pcie;
+ struct combphy_reg con3_for_pcie;
+ struct combphy_reg con0_for_sata;
+ struct combphy_reg con1_for_sata;
+ struct combphy_reg con2_for_sata;
+ struct combphy_reg con3_for_sata;
+ struct combphy_reg pipe_con0_for_sata;
+ struct combphy_reg pipe_con1_for_sata;
+ struct combphy_reg pipe_xpcs_phy_ready;
+ struct combphy_reg pipe_pcie1l0_sel;
+ struct combphy_reg pipe_pcie1l1_sel;
+};
+
+struct rockchip_combphy_cfg {
+ const struct rockchip_combphy_grfcfg *grfcfg;
+ int (*combphy_cfg)(struct rockchip_combphy_priv *priv);
+};
+
+struct rockchip_combphy_priv {
+ u8 type;
+ void __iomem *mmio;
+ int num_clks;
+ struct clk_bulk_data *clks;
+ struct device *dev;
+ struct regmap *pipe_grf;
+ struct regmap *phy_grf;
+ struct phy *phy;
+ struct reset_control *phy_rst;
+ const struct rockchip_combphy_cfg *cfg;
+ bool enable_ssc;
+ bool ext_refclk;
+ struct clk *refclk;
+};
+
+static void rockchip_combphy_updatel(struct rockchip_combphy_priv *priv,
+ int mask, int val, int reg)
+{
+ unsigned int temp;
+
+ temp = readl(priv->mmio + reg);
+ temp = (temp & ~(mask)) | val;
+ writel(temp, priv->mmio + reg);
+}
+
+static int rockchip_combphy_param_write(struct regmap *base,
+ const struct combphy_reg *reg, bool en)
+{
+ u32 val, mask, tmp;
+
+ tmp = en ? reg->enable : reg->disable;
+ mask = GENMASK(reg->bitend, reg->bitstart);
+ val = (tmp << reg->bitstart) | (mask << BIT_WRITEABLE_SHIFT);
+
+ return regmap_write(base, reg->offset, val);
+}
+
+static u32 rockchip_combphy_is_ready(struct rockchip_combphy_priv *priv)
+{
+ const struct rockchip_combphy_grfcfg *cfg = priv->cfg->grfcfg;
+ u32 mask, val;
+
+ mask = GENMASK(cfg->pipe_phy_status.bitend,
+ cfg->pipe_phy_status.bitstart);
+
+ regmap_read(priv->phy_grf, cfg->pipe_phy_status.offset, &val);
+ val = (val & mask) >> cfg->pipe_phy_status.bitstart;
+
+ return val;
+}
+
+static int rockchip_combphy_init(struct phy *phy)
+{
+ struct rockchip_combphy_priv *priv = phy_get_drvdata(phy);
+ const struct rockchip_combphy_grfcfg *cfg = priv->cfg->grfcfg;
+ u32 val;
+ int ret;
+
+ ret = clk_bulk_prepare_enable(priv->num_clks, priv->clks);
+ if (ret) {
+ dev_err(priv->dev, "failed to enable clks\n");
+ return ret;
+ }
+
+ switch (priv->type) {
+ case PHY_TYPE_PCIE:
+ case PHY_TYPE_USB3:
+ case PHY_TYPE_SATA:
+ case PHY_TYPE_SGMII:
+ case PHY_TYPE_QSGMII:
+ if (priv->cfg->combphy_cfg)
+ ret = priv->cfg->combphy_cfg(priv);
+ break;
+ default:
+ dev_err(priv->dev, "incompatible PHY type\n");
+ ret = -EINVAL;
+ break;
+ }
+
+ if (ret) {
+ dev_err(priv->dev, "failed to init phy for phy type %x\n", priv->type);
+ goto err_clk;
+ }
+
+ ret = reset_control_deassert(priv->phy_rst);
+ if (ret)
+ goto err_clk;
+
+ if (priv->type == PHY_TYPE_USB3) {
+ ret = readx_poll_timeout_atomic(rockchip_combphy_is_ready,
+ priv, val,
+ val == cfg->pipe_phy_status.enable,
+ 10, 1000);
+ if (ret)
+ dev_warn(priv->dev, "wait phy status ready timeout\n");
+ }
+
+ return 0;
+
+err_clk:
+ clk_bulk_disable_unprepare(priv->num_clks, priv->clks);
+
+ return ret;
+}
+
+static int rockchip_combphy_exit(struct phy *phy)
+{
+ struct rockchip_combphy_priv *priv = phy_get_drvdata(phy);
+
+ clk_bulk_disable_unprepare(priv->num_clks, priv->clks);
+ reset_control_assert(priv->phy_rst);
+
+ return 0;
+}
+
+static const struct phy_ops rochchip_combphy_ops = {
+ .init = rockchip_combphy_init,
+ .exit = rockchip_combphy_exit,
+ .owner = THIS_MODULE,
+};
+
+static struct phy *rockchip_combphy_xlate(struct device *dev, struct of_phandle_args *args)
+{
+ struct rockchip_combphy_priv *priv = dev_get_drvdata(dev);
+
+ if (args->args_count != 1) {
+ dev_err(dev, "invalid number of arguments\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ if (priv->type != PHY_NONE && priv->type != args->args[0])
+ dev_warn(dev, "phy type select %d overwriting type %d\n",
+ args->args[0], priv->type);
+
+ priv->type = args->args[0];
+
+ return priv->phy;
+}
+
+static int rockchip_combphy_parse_dt(struct device *dev, struct rockchip_combphy_priv *priv)
+{
+ int i;
+
+ priv->num_clks = devm_clk_bulk_get_all(dev, &priv->clks);
+ if (priv->num_clks < 1)
+ return -EINVAL;
+
+ priv->refclk = NULL;
+ for (i = 0; i < priv->num_clks; i++) {
+ if (!strncmp(priv->clks[i].id, "ref", 3)) {
+ priv->refclk = priv->clks[i].clk;
+ break;
+ }
+ }
+
+ if (!priv->refclk) {
+ dev_err(dev, "no refclk found\n");
+ return -EINVAL;
+ }
+
+ priv->pipe_grf = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,pipe-grf");
+ if (IS_ERR(priv->pipe_grf)) {
+ dev_err(dev, "failed to find peri_ctrl pipe-grf regmap\n");
+ return PTR_ERR(priv->pipe_grf);
+ }
+
+ priv->phy_grf = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,pipe-phy-grf");
+ if (IS_ERR(priv->phy_grf)) {
+ dev_err(dev, "failed to find peri_ctrl pipe-phy-grf regmap\n");
+ return PTR_ERR(priv->phy_grf);
+ }
+
+ priv->enable_ssc = device_property_present(dev, "rockchip,enable-ssc");
+
+ priv->ext_refclk = device_property_present(dev, "rockchip,ext-refclk");
+
+ priv->phy_rst = devm_reset_control_array_get_exclusive(dev);
+ if (IS_ERR(priv->phy_rst))
+ return dev_err_probe(dev, PTR_ERR(priv->phy_rst), "failed to get phy reset\n");
+
+ return 0;
+}
+
+static int rockchip_combphy_probe(struct platform_device *pdev)
+{
+ struct phy_provider *phy_provider;
+ struct device *dev = &pdev->dev;
+ struct rockchip_combphy_priv *priv;
+ const struct rockchip_combphy_cfg *phy_cfg;
+ struct resource *res;
+ int ret;
+
+ phy_cfg = of_device_get_match_data(dev);
+ if (!phy_cfg) {
+ dev_err(dev, "no OF match data provided\n");
+ return -EINVAL;
+ }
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->mmio = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
+ if (IS_ERR(priv->mmio)) {
+ ret = PTR_ERR(priv->mmio);
+ return ret;
+ }
+
+ priv->dev = dev;
+ priv->type = PHY_NONE;
+ priv->cfg = phy_cfg;
+
+ ret = rockchip_combphy_parse_dt(dev, priv);
+ if (ret)
+ return ret;
+
+ ret = reset_control_assert(priv->phy_rst);
+ if (ret) {
+ dev_err(dev, "failed to reset phy\n");
+ return ret;
+ }
+
+ priv->phy = devm_phy_create(dev, NULL, &rochchip_combphy_ops);
+ if (IS_ERR(priv->phy)) {
+ dev_err(dev, "failed to create combphy\n");
+ return PTR_ERR(priv->phy);
+ }
+
+ dev_set_drvdata(dev, priv);
+ phy_set_drvdata(priv->phy, priv);
+
+ phy_provider = devm_of_phy_provider_register(dev, rockchip_combphy_xlate);
+
+ return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static int rk3568_combphy_cfg(struct rockchip_combphy_priv *priv)
+{
+ const struct rockchip_combphy_grfcfg *cfg = priv->cfg->grfcfg;
+ unsigned long rate;
+ u32 val;
+
+ switch (priv->type) {
+ case PHY_TYPE_PCIE:
+ /* Set SSC downward spread spectrum. */
+ rockchip_combphy_updatel(priv, PHYREG32_SSC_MASK,
+ PHYREG32_SSC_DOWNWARD << PHYREG32_SSC_DIR_SHIFT,
+ PHYREG32);
+
+ rockchip_combphy_param_write(priv->phy_grf, &cfg->con0_for_pcie, true);
+ rockchip_combphy_param_write(priv->phy_grf, &cfg->con1_for_pcie, true);
+ rockchip_combphy_param_write(priv->phy_grf, &cfg->con2_for_pcie, true);
+ rockchip_combphy_param_write(priv->phy_grf, &cfg->con3_for_pcie, true);
+ break;
+
+ case PHY_TYPE_USB3:
+ /* Set SSC downward spread spectrum. */
+ rockchip_combphy_updatel(priv, PHYREG32_SSC_MASK,
+ PHYREG32_SSC_DOWNWARD << PHYREG32_SSC_DIR_SHIFT,
+ PHYREG32);
+
+ /* Enable adaptive CTLE for USB3.0 Rx. */
+ val = readl(priv->mmio + PHYREG15);
+ val |= PHYREG15_CTLE_EN;
+ writel(val, priv->mmio + PHYREG15);
+
+ /* Set PLL KVCO fine tuning signals. */
+ rockchip_combphy_updatel(priv, PHYREG33_PLL_KVCO_MASK,
+ PHYREG33_PLL_KVCO_VALUE << PHYREG33_PLL_KVCO_SHIFT,
+ PHYREG33);
+
+ /* Enable controlling random jitter. */
+ writel(PHYREG12_PLL_LPF_ADJ_VALUE, priv->mmio + PHYREG12);
+
+ /* Set PLL input clock divider 1/2. */
+ rockchip_combphy_updatel(priv, PHYREG6_PLL_DIV_MASK,
+ PHYREG6_PLL_DIV_2 << PHYREG6_PLL_DIV_SHIFT,
+ PHYREG6);
+
+ writel(PHYREG18_PLL_LOOP, priv->mmio + PHYREG18);
+ writel(PHYREG11_SU_TRIM_0_7, priv->mmio + PHYREG11);
+
+ rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_sel_usb, true);
+ rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_txcomp_sel, false);
+ rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_txelec_sel, false);
+ rockchip_combphy_param_write(priv->phy_grf, &cfg->usb_mode_set, true);
+ break;
+
+ case PHY_TYPE_SATA:
+ /* Enable adaptive CTLE for SATA Rx. */
+ val = readl(priv->mmio + PHYREG15);
+ val |= PHYREG15_CTLE_EN;
+ writel(val, priv->mmio + PHYREG15);
+ /*
+ * Set tx_rterm=50ohm and rx_rterm=44ohm for SATA.
+ * 0: 60ohm, 8: 50ohm 15: 44ohm (by step abort 1ohm)
+ */
+ val = PHYREG7_TX_RTERM_50OHM << PHYREG7_TX_RTERM_SHIFT;
+ val |= PHYREG7_RX_RTERM_44OHM << PHYREG7_RX_RTERM_SHIFT;
+ writel(val, priv->mmio + PHYREG7);
+
+ rockchip_combphy_param_write(priv->phy_grf, &cfg->con0_for_sata, true);
+ rockchip_combphy_param_write(priv->phy_grf, &cfg->con1_for_sata, true);
+ rockchip_combphy_param_write(priv->phy_grf, &cfg->con2_for_sata, true);
+ rockchip_combphy_param_write(priv->phy_grf, &cfg->con3_for_sata, true);
+ rockchip_combphy_param_write(priv->pipe_grf, &cfg->pipe_con0_for_sata, true);
+ break;
+
+ case PHY_TYPE_SGMII:
+ rockchip_combphy_param_write(priv->pipe_grf, &cfg->pipe_xpcs_phy_ready, true);
+ rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_phymode_sel, true);
+ rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_sel_qsgmii, true);
+ rockchip_combphy_param_write(priv->phy_grf, &cfg->sgmii_mode_set, true);
+ break;
+
+ case PHY_TYPE_QSGMII:
+ rockchip_combphy_param_write(priv->pipe_grf, &cfg->pipe_xpcs_phy_ready, true);
+ rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_phymode_sel, true);
+ rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_rate_sel, true);
+ rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_sel_qsgmii, true);
+ rockchip_combphy_param_write(priv->phy_grf, &cfg->qsgmii_mode_set, true);
+ break;
+
+ default:
+ dev_err(priv->dev, "incompatible PHY type\n");
+ return -EINVAL;
+ }
+
+ rate = clk_get_rate(priv->refclk);
+
+ switch (rate) {
+ case REF_CLOCK_24MHz:
+ if (priv->type == PHY_TYPE_USB3 || priv->type == PHY_TYPE_SATA) {
+ /* Set ssc_cnt[9:0]=0101111101 & 31.5KHz. */
+ val = PHYREG15_SSC_CNT_VALUE << PHYREG15_SSC_CNT_SHIFT;
+ rockchip_combphy_updatel(priv, PHYREG15_SSC_CNT_MASK,
+ val, PHYREG15);
+
+ writel(PHYREG16_SSC_CNT_VALUE, priv->mmio + PHYREG16);
+ }
+ break;
+
+ case REF_CLOCK_25MHz:
+ rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_25m, true);
+ break;
+
+ case REF_CLOCK_100MHz:
+ rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_100m, true);
+ if (priv->type == PHY_TYPE_PCIE) {
+ /* PLL KVCO fine tuning. */
+ val = PHYREG33_PLL_KVCO_VALUE << PHYREG33_PLL_KVCO_SHIFT;
+ rockchip_combphy_updatel(priv, PHYREG33_PLL_KVCO_MASK,
+ val, PHYREG33);
+
+ /* Enable controlling random jitter. */
+ writel(PHYREG12_PLL_LPF_ADJ_VALUE, priv->mmio + PHYREG12);
+
+ val = PHYREG6_PLL_DIV_2 << PHYREG6_PLL_DIV_SHIFT;
+ rockchip_combphy_updatel(priv, PHYREG6_PLL_DIV_MASK,
+ val, PHYREG6);
+
+ writel(PHYREG18_PLL_LOOP, priv->mmio + PHYREG18);
+ writel(PHYREG11_SU_TRIM_0_7, priv->mmio + PHYREG11);
+ } else if (priv->type == PHY_TYPE_SATA) {
+ /* downward spread spectrum +500ppm */
+ val = PHYREG32_SSC_DOWNWARD << PHYREG32_SSC_DIR_SHIFT;
+ val |= PHYREG32_SSC_OFFSET_500PPM << PHYREG32_SSC_OFFSET_SHIFT;
+ rockchip_combphy_updatel(priv, PHYREG32_SSC_MASK, val, PHYREG32);
+ }
+ break;
+
+ default:
+ dev_err(priv->dev, "unsupported rate: %lu\n", rate);
+ return -EINVAL;
+ }
+
+ if (priv->ext_refclk) {
+ rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_ext, true);
+ if (priv->type == PHY_TYPE_PCIE && rate == REF_CLOCK_100MHz) {
+ val = PHYREG13_RESISTER_HIGH_Z << PHYREG13_RESISTER_SHIFT;
+ val |= PHYREG13_CKRCV_AMP0;
+ rockchip_combphy_updatel(priv, PHYREG13_RESISTER_MASK, val, PHYREG13);
+
+ val = readl(priv->mmio + PHYREG14);
+ val |= PHYREG14_CKRCV_AMP1;
+ writel(val, priv->mmio + PHYREG14);
+ }
+ }
+
+ if (priv->enable_ssc) {
+ val = readl(priv->mmio + PHYREG8);
+ val |= PHYREG8_SSC_EN;
+ writel(val, priv->mmio + PHYREG8);
+ }
+
+ return 0;
+}
+
+static const struct rockchip_combphy_grfcfg rk3568_combphy_grfcfgs = {
+ /* pipe-phy-grf */
+ .pcie_mode_set = { 0x0000, 5, 0, 0x00, 0x11 },
+ .usb_mode_set = { 0x0000, 5, 0, 0x00, 0x04 },
+ .sgmii_mode_set = { 0x0000, 5, 0, 0x00, 0x01 },
+ .qsgmii_mode_set = { 0x0000, 5, 0, 0x00, 0x21 },
+ .pipe_rxterm_set = { 0x0000, 12, 12, 0x00, 0x01 },
+ .pipe_txelec_set = { 0x0004, 1, 1, 0x00, 0x01 },
+ .pipe_txcomp_set = { 0x0004, 4, 4, 0x00, 0x01 },
+ .pipe_clk_25m = { 0x0004, 14, 13, 0x00, 0x01 },
+ .pipe_clk_100m = { 0x0004, 14, 13, 0x00, 0x02 },
+ .pipe_phymode_sel = { 0x0008, 1, 1, 0x00, 0x01 },
+ .pipe_rate_sel = { 0x0008, 2, 2, 0x00, 0x01 },
+ .pipe_rxterm_sel = { 0x0008, 8, 8, 0x00, 0x01 },
+ .pipe_txelec_sel = { 0x0008, 12, 12, 0x00, 0x01 },
+ .pipe_txcomp_sel = { 0x0008, 15, 15, 0x00, 0x01 },
+ .pipe_clk_ext = { 0x000c, 9, 8, 0x02, 0x01 },
+ .pipe_sel_usb = { 0x000c, 14, 13, 0x00, 0x01 },
+ .pipe_sel_qsgmii = { 0x000c, 15, 13, 0x00, 0x07 },
+ .pipe_phy_status = { 0x0034, 6, 6, 0x01, 0x00 },
+ .con0_for_pcie = { 0x0000, 15, 0, 0x00, 0x1000 },
+ .con1_for_pcie = { 0x0004, 15, 0, 0x00, 0x0000 },
+ .con2_for_pcie = { 0x0008, 15, 0, 0x00, 0x0101 },
+ .con3_for_pcie = { 0x000c, 15, 0, 0x00, 0x0200 },
+ .con0_for_sata = { 0x0000, 15, 0, 0x00, 0x0119 },
+ .con1_for_sata = { 0x0004, 15, 0, 0x00, 0x0040 },
+ .con2_for_sata = { 0x0008, 15, 0, 0x00, 0x80c3 },
+ .con3_for_sata = { 0x000c, 15, 0, 0x00, 0x4407 },
+ /* pipe-grf */
+ .pipe_con0_for_sata = { 0x0000, 15, 0, 0x00, 0x2220 },
+ .pipe_xpcs_phy_ready = { 0x0040, 2, 2, 0x00, 0x01 },
+};
+
+static const struct rockchip_combphy_cfg rk3568_combphy_cfgs = {
+ .grfcfg = &rk3568_combphy_grfcfgs,
+ .combphy_cfg = rk3568_combphy_cfg,
+};
+
+static int rk3588_combphy_cfg(struct rockchip_combphy_priv *priv)
+{
+ const struct rockchip_combphy_grfcfg *cfg = priv->cfg->grfcfg;
+ unsigned long rate;
+ u32 val;
+
+ switch (priv->type) {
+ case PHY_TYPE_PCIE:
+ rockchip_combphy_param_write(priv->phy_grf, &cfg->con0_for_pcie, true);
+ rockchip_combphy_param_write(priv->phy_grf, &cfg->con1_for_pcie, true);
+ rockchip_combphy_param_write(priv->phy_grf, &cfg->con2_for_pcie, true);
+ rockchip_combphy_param_write(priv->phy_grf, &cfg->con3_for_pcie, true);
+ rockchip_combphy_param_write(priv->pipe_grf, &cfg->pipe_pcie1l0_sel, true);
+ rockchip_combphy_param_write(priv->pipe_grf, &cfg->pipe_pcie1l1_sel, true);
+ break;
+ case PHY_TYPE_USB3:
+ /* Set SSC downward spread spectrum */
+ rockchip_combphy_updatel(priv, PHYREG32_SSC_MASK,
+ PHYREG32_SSC_DOWNWARD << PHYREG32_SSC_DIR_SHIFT,
+ PHYREG32);
+
+ /* Enable adaptive CTLE for USB3.0 Rx. */
+ val = readl(priv->mmio + PHYREG15);
+ val |= PHYREG15_CTLE_EN;
+ writel(val, priv->mmio + PHYREG15);
+
+ /* Set PLL KVCO fine tuning signals. */
+ rockchip_combphy_updatel(priv, PHYREG33_PLL_KVCO_MASK,
+ PHYREG33_PLL_KVCO_VALUE << PHYREG33_PLL_KVCO_SHIFT,
+ PHYREG33);
+
+ /* Enable controlling random jitter. */
+ writel(PHYREG12_PLL_LPF_ADJ_VALUE, priv->mmio + PHYREG12);
+
+ /* Set PLL input clock divider 1/2. */
+ rockchip_combphy_updatel(priv, PHYREG6_PLL_DIV_MASK,
+ PHYREG6_PLL_DIV_2 << PHYREG6_PLL_DIV_SHIFT,
+ PHYREG6);
+
+ writel(PHYREG18_PLL_LOOP, priv->mmio + PHYREG18);
+ writel(PHYREG11_SU_TRIM_0_7, priv->mmio + PHYREG11);
+
+ rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_txcomp_sel, false);
+ rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_txelec_sel, false);
+ rockchip_combphy_param_write(priv->phy_grf, &cfg->usb_mode_set, true);
+ break;
+ case PHY_TYPE_SATA:
+ /* Enable adaptive CTLE for SATA Rx. */
+ val = readl(priv->mmio + PHYREG15);
+ val |= PHYREG15_CTLE_EN;
+ writel(val, priv->mmio + PHYREG15);
+ /*
+ * Set tx_rterm=50ohm and rx_rterm=44ohm for SATA.
+ * 0: 60ohm, 8: 50ohm 15: 44ohm (by step abort 1ohm)
+ */
+ val = PHYREG7_TX_RTERM_50OHM << PHYREG7_TX_RTERM_SHIFT;
+ val |= PHYREG7_RX_RTERM_44OHM << PHYREG7_RX_RTERM_SHIFT;
+ writel(val, priv->mmio + PHYREG7);
+
+ rockchip_combphy_param_write(priv->phy_grf, &cfg->con0_for_sata, true);
+ rockchip_combphy_param_write(priv->phy_grf, &cfg->con1_for_sata, true);
+ rockchip_combphy_param_write(priv->phy_grf, &cfg->con2_for_sata, true);
+ rockchip_combphy_param_write(priv->phy_grf, &cfg->con3_for_sata, true);
+ rockchip_combphy_param_write(priv->pipe_grf, &cfg->pipe_con0_for_sata, true);
+ rockchip_combphy_param_write(priv->pipe_grf, &cfg->pipe_con1_for_sata, true);
+ break;
+ case PHY_TYPE_SGMII:
+ case PHY_TYPE_QSGMII:
+ default:
+ dev_err(priv->dev, "incompatible PHY type\n");
+ return -EINVAL;
+ }
+
+ rate = clk_get_rate(priv->refclk);
+
+ switch (rate) {
+ case REF_CLOCK_24MHz:
+ if (priv->type == PHY_TYPE_USB3 || priv->type == PHY_TYPE_SATA) {
+ /* Set ssc_cnt[9:0]=0101111101 & 31.5KHz. */
+ val = PHYREG15_SSC_CNT_VALUE << PHYREG15_SSC_CNT_SHIFT;
+ rockchip_combphy_updatel(priv, PHYREG15_SSC_CNT_MASK,
+ val, PHYREG15);
+
+ writel(PHYREG16_SSC_CNT_VALUE, priv->mmio + PHYREG16);
+ }
+ break;
+
+ case REF_CLOCK_25MHz:
+ rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_25m, true);
+ break;
+ case REF_CLOCK_100MHz:
+ rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_100m, true);
+ if (priv->type == PHY_TYPE_PCIE) {
+ /* PLL KVCO fine tuning. */
+ val = 4 << PHYREG33_PLL_KVCO_SHIFT;
+ rockchip_combphy_updatel(priv, PHYREG33_PLL_KVCO_MASK,
+ val, PHYREG33);
+
+ /* Enable controlling random jitter. */
+ writel(PHYREG12_PLL_LPF_ADJ_VALUE, priv->mmio + PHYREG12);
+
+ /* Set up rx_trim: PLL LPF C1 85pf R1 1.25kohm */
+ writel(PHYREG27_RX_TRIM_RK3588, priv->mmio + PHYREG27);
+
+ /* Set up su_trim: */
+ writel(PHYREG11_SU_TRIM_0_7, priv->mmio + PHYREG11);
+ } else if (priv->type == PHY_TYPE_SATA) {
+ /* downward spread spectrum +500ppm */
+ val = PHYREG32_SSC_DOWNWARD << PHYREG32_SSC_DIR_SHIFT;
+ val |= PHYREG32_SSC_OFFSET_500PPM << PHYREG32_SSC_OFFSET_SHIFT;
+ rockchip_combphy_updatel(priv, PHYREG32_SSC_MASK, val, PHYREG32);
+ }
+ break;
+ default:
+ dev_err(priv->dev, "Unsupported rate: %lu\n", rate);
+ return -EINVAL;
+ }
+
+ if (priv->ext_refclk) {
+ rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_ext, true);
+ if (priv->type == PHY_TYPE_PCIE && rate == REF_CLOCK_100MHz) {
+ val = PHYREG13_RESISTER_HIGH_Z << PHYREG13_RESISTER_SHIFT;
+ val |= PHYREG13_CKRCV_AMP0;
+ rockchip_combphy_updatel(priv, PHYREG13_RESISTER_MASK, val, PHYREG13);
+
+ val = readl(priv->mmio + PHYREG14);
+ val |= PHYREG14_CKRCV_AMP1;
+ writel(val, priv->mmio + PHYREG14);
+ }
+ }
+
+ if (priv->enable_ssc) {
+ val = readl(priv->mmio + PHYREG8);
+ val |= PHYREG8_SSC_EN;
+ writel(val, priv->mmio + PHYREG8);
+ }
+
+ return 0;
+}
+
+static const struct rockchip_combphy_grfcfg rk3588_combphy_grfcfgs = {
+ /* pipe-phy-grf */
+ .pcie_mode_set = { 0x0000, 5, 0, 0x00, 0x11 },
+ .usb_mode_set = { 0x0000, 5, 0, 0x00, 0x04 },
+ .pipe_rxterm_set = { 0x0000, 12, 12, 0x00, 0x01 },
+ .pipe_txelec_set = { 0x0004, 1, 1, 0x00, 0x01 },
+ .pipe_txcomp_set = { 0x0004, 4, 4, 0x00, 0x01 },
+ .pipe_clk_25m = { 0x0004, 14, 13, 0x00, 0x01 },
+ .pipe_clk_100m = { 0x0004, 14, 13, 0x00, 0x02 },
+ .pipe_rxterm_sel = { 0x0008, 8, 8, 0x00, 0x01 },
+ .pipe_txelec_sel = { 0x0008, 12, 12, 0x00, 0x01 },
+ .pipe_txcomp_sel = { 0x0008, 15, 15, 0x00, 0x01 },
+ .pipe_clk_ext = { 0x000c, 9, 8, 0x02, 0x01 },
+ .pipe_phy_status = { 0x0034, 6, 6, 0x01, 0x00 },
+ .con0_for_pcie = { 0x0000, 15, 0, 0x00, 0x1000 },
+ .con1_for_pcie = { 0x0004, 15, 0, 0x00, 0x0000 },
+ .con2_for_pcie = { 0x0008, 15, 0, 0x00, 0x0101 },
+ .con3_for_pcie = { 0x000c, 15, 0, 0x00, 0x0200 },
+ .con0_for_sata = { 0x0000, 15, 0, 0x00, 0x0129 },
+ .con1_for_sata = { 0x0004, 15, 0, 0x00, 0x0000 },
+ .con2_for_sata = { 0x0008, 15, 0, 0x00, 0x80c1 },
+ .con3_for_sata = { 0x000c, 15, 0, 0x00, 0x0407 },
+ /* pipe-grf */
+ .pipe_con0_for_sata = { 0x0000, 11, 5, 0x00, 0x22 },
+ .pipe_con1_for_sata = { 0x0000, 2, 0, 0x00, 0x2 },
+ .pipe_pcie1l0_sel = { 0x0100, 0, 0, 0x01, 0x0 },
+ .pipe_pcie1l1_sel = { 0x0100, 1, 1, 0x01, 0x0 },
+};
+
+static const struct rockchip_combphy_cfg rk3588_combphy_cfgs = {
+ .grfcfg = &rk3588_combphy_grfcfgs,
+ .combphy_cfg = rk3588_combphy_cfg,
+};
+
+static const struct of_device_id rockchip_combphy_of_match[] = {
+ {
+ .compatible = "rockchip,rk3568-naneng-combphy",
+ .data = &rk3568_combphy_cfgs,
+ },
+ {
+ .compatible = "rockchip,rk3588-naneng-combphy",
+ .data = &rk3588_combphy_cfgs,
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(of, rockchip_combphy_of_match);
+
+static struct platform_driver rockchip_combphy_driver = {
+ .probe = rockchip_combphy_probe,
+ .driver = {
+ .name = "rockchip-naneng-combphy",
+ .of_match_table = rockchip_combphy_of_match,
+ },
+};
+module_platform_driver(rockchip_combphy_driver);
+
+MODULE_DESCRIPTION("Rockchip NANENG COMBPHY driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/rockchip/phy-rockchip-pcie.c b/drivers/phy/rockchip/phy-rockchip-pcie.c
new file mode 100644
index 0000000000..8234b83fdd
--- /dev/null
+++ b/drivers/phy/rockchip/phy-rockchip-pcie.c
@@ -0,0 +1,426 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Rockchip PCIe PHY driver
+ *
+ * Copyright (C) 2016 Shawn Lin <shawn.lin@rock-chips.com>
+ * Copyright (C) 2016 ROCKCHIP, Inc.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+
+/*
+ * The higher 16-bit of this register is used for write protection
+ * only if BIT(x + 16) set to 1 the BIT(x) can be written.
+ */
+#define HIWORD_UPDATE(val, mask, shift) \
+ ((val) << (shift) | (mask) << ((shift) + 16))
+
+#define PHY_MAX_LANE_NUM 4
+#define PHY_CFG_DATA_SHIFT 7
+#define PHY_CFG_ADDR_SHIFT 1
+#define PHY_CFG_DATA_MASK 0xf
+#define PHY_CFG_ADDR_MASK 0x3f
+#define PHY_CFG_RD_MASK 0x3ff
+#define PHY_CFG_WR_ENABLE 1
+#define PHY_CFG_WR_DISABLE 1
+#define PHY_CFG_WR_SHIFT 0
+#define PHY_CFG_WR_MASK 1
+#define PHY_CFG_PLL_LOCK 0x10
+#define PHY_CFG_CLK_TEST 0x10
+#define PHY_CFG_CLK_SCC 0x12
+#define PHY_CFG_SEPE_RATE BIT(3)
+#define PHY_CFG_PLL_100M BIT(3)
+#define PHY_PLL_LOCKED BIT(9)
+#define PHY_PLL_OUTPUT BIT(10)
+#define PHY_LANE_A_STATUS 0x30
+#define PHY_LANE_B_STATUS 0x31
+#define PHY_LANE_C_STATUS 0x32
+#define PHY_LANE_D_STATUS 0x33
+#define PHY_LANE_RX_DET_SHIFT 11
+#define PHY_LANE_RX_DET_TH 0x1
+#define PHY_LANE_IDLE_OFF 0x1
+#define PHY_LANE_IDLE_MASK 0x1
+#define PHY_LANE_IDLE_A_SHIFT 3
+#define PHY_LANE_IDLE_B_SHIFT 4
+#define PHY_LANE_IDLE_C_SHIFT 5
+#define PHY_LANE_IDLE_D_SHIFT 6
+
+struct rockchip_pcie_data {
+ unsigned int pcie_conf;
+ unsigned int pcie_status;
+ unsigned int pcie_laneoff;
+};
+
+struct rockchip_pcie_phy {
+ struct rockchip_pcie_data *phy_data;
+ struct regmap *reg_base;
+ struct phy_pcie_instance {
+ struct phy *phy;
+ u32 index;
+ } phys[PHY_MAX_LANE_NUM];
+ struct mutex pcie_mutex;
+ struct reset_control *phy_rst;
+ struct clk *clk_pciephy_ref;
+ int pwr_cnt;
+ int init_cnt;
+};
+
+static struct rockchip_pcie_phy *to_pcie_phy(struct phy_pcie_instance *inst)
+{
+ return container_of(inst, struct rockchip_pcie_phy,
+ phys[inst->index]);
+}
+
+static struct phy *rockchip_pcie_phy_of_xlate(struct device *dev,
+ struct of_phandle_args *args)
+{
+ struct rockchip_pcie_phy *rk_phy = dev_get_drvdata(dev);
+
+ if (args->args_count == 0)
+ return rk_phy->phys[0].phy;
+
+ if (WARN_ON(args->args[0] >= PHY_MAX_LANE_NUM))
+ return ERR_PTR(-ENODEV);
+
+ return rk_phy->phys[args->args[0]].phy;
+}
+
+
+static inline void phy_wr_cfg(struct rockchip_pcie_phy *rk_phy,
+ u32 addr, u32 data)
+{
+ regmap_write(rk_phy->reg_base, rk_phy->phy_data->pcie_conf,
+ HIWORD_UPDATE(data,
+ PHY_CFG_DATA_MASK,
+ PHY_CFG_DATA_SHIFT) |
+ HIWORD_UPDATE(addr,
+ PHY_CFG_ADDR_MASK,
+ PHY_CFG_ADDR_SHIFT));
+ udelay(1);
+ regmap_write(rk_phy->reg_base, rk_phy->phy_data->pcie_conf,
+ HIWORD_UPDATE(PHY_CFG_WR_ENABLE,
+ PHY_CFG_WR_MASK,
+ PHY_CFG_WR_SHIFT));
+ udelay(1);
+ regmap_write(rk_phy->reg_base, rk_phy->phy_data->pcie_conf,
+ HIWORD_UPDATE(PHY_CFG_WR_DISABLE,
+ PHY_CFG_WR_MASK,
+ PHY_CFG_WR_SHIFT));
+}
+
+static int rockchip_pcie_phy_power_off(struct phy *phy)
+{
+ struct phy_pcie_instance *inst = phy_get_drvdata(phy);
+ struct rockchip_pcie_phy *rk_phy = to_pcie_phy(inst);
+ int err = 0;
+
+ mutex_lock(&rk_phy->pcie_mutex);
+
+ regmap_write(rk_phy->reg_base,
+ rk_phy->phy_data->pcie_laneoff,
+ HIWORD_UPDATE(PHY_LANE_IDLE_OFF,
+ PHY_LANE_IDLE_MASK,
+ PHY_LANE_IDLE_A_SHIFT + inst->index));
+
+ if (--rk_phy->pwr_cnt)
+ goto err_out;
+
+ err = reset_control_assert(rk_phy->phy_rst);
+ if (err) {
+ dev_err(&phy->dev, "assert phy_rst err %d\n", err);
+ goto err_restore;
+ }
+
+err_out:
+ mutex_unlock(&rk_phy->pcie_mutex);
+ return 0;
+
+err_restore:
+ rk_phy->pwr_cnt++;
+ regmap_write(rk_phy->reg_base,
+ rk_phy->phy_data->pcie_laneoff,
+ HIWORD_UPDATE(!PHY_LANE_IDLE_OFF,
+ PHY_LANE_IDLE_MASK,
+ PHY_LANE_IDLE_A_SHIFT + inst->index));
+ mutex_unlock(&rk_phy->pcie_mutex);
+ return err;
+}
+
+static int rockchip_pcie_phy_power_on(struct phy *phy)
+{
+ struct phy_pcie_instance *inst = phy_get_drvdata(phy);
+ struct rockchip_pcie_phy *rk_phy = to_pcie_phy(inst);
+ int err = 0;
+ u32 status;
+ unsigned long timeout;
+
+ mutex_lock(&rk_phy->pcie_mutex);
+
+ if (rk_phy->pwr_cnt++)
+ goto err_out;
+
+ err = reset_control_deassert(rk_phy->phy_rst);
+ if (err) {
+ dev_err(&phy->dev, "deassert phy_rst err %d\n", err);
+ goto err_pwr_cnt;
+ }
+
+ regmap_write(rk_phy->reg_base, rk_phy->phy_data->pcie_conf,
+ HIWORD_UPDATE(PHY_CFG_PLL_LOCK,
+ PHY_CFG_ADDR_MASK,
+ PHY_CFG_ADDR_SHIFT));
+
+ regmap_write(rk_phy->reg_base,
+ rk_phy->phy_data->pcie_laneoff,
+ HIWORD_UPDATE(!PHY_LANE_IDLE_OFF,
+ PHY_LANE_IDLE_MASK,
+ PHY_LANE_IDLE_A_SHIFT + inst->index));
+
+ /*
+ * No documented timeout value for phy operation below,
+ * so we make it large enough here. And we use loop-break
+ * method which should not be harmful.
+ */
+ timeout = jiffies + msecs_to_jiffies(1000);
+
+ err = -EINVAL;
+ while (time_before(jiffies, timeout)) {
+ regmap_read(rk_phy->reg_base,
+ rk_phy->phy_data->pcie_status,
+ &status);
+ if (status & PHY_PLL_LOCKED) {
+ dev_dbg(&phy->dev, "pll locked!\n");
+ err = 0;
+ break;
+ }
+ msleep(20);
+ }
+
+ if (err) {
+ dev_err(&phy->dev, "pll lock timeout!\n");
+ goto err_pll_lock;
+ }
+
+ phy_wr_cfg(rk_phy, PHY_CFG_CLK_TEST, PHY_CFG_SEPE_RATE);
+ phy_wr_cfg(rk_phy, PHY_CFG_CLK_SCC, PHY_CFG_PLL_100M);
+
+ err = -ETIMEDOUT;
+ while (time_before(jiffies, timeout)) {
+ regmap_read(rk_phy->reg_base,
+ rk_phy->phy_data->pcie_status,
+ &status);
+ if (!(status & PHY_PLL_OUTPUT)) {
+ dev_dbg(&phy->dev, "pll output enable done!\n");
+ err = 0;
+ break;
+ }
+ msleep(20);
+ }
+
+ if (err) {
+ dev_err(&phy->dev, "pll output enable timeout!\n");
+ goto err_pll_lock;
+ }
+
+ regmap_write(rk_phy->reg_base, rk_phy->phy_data->pcie_conf,
+ HIWORD_UPDATE(PHY_CFG_PLL_LOCK,
+ PHY_CFG_ADDR_MASK,
+ PHY_CFG_ADDR_SHIFT));
+ err = -EINVAL;
+ while (time_before(jiffies, timeout)) {
+ regmap_read(rk_phy->reg_base,
+ rk_phy->phy_data->pcie_status,
+ &status);
+ if (status & PHY_PLL_LOCKED) {
+ dev_dbg(&phy->dev, "pll relocked!\n");
+ err = 0;
+ break;
+ }
+ msleep(20);
+ }
+
+ if (err) {
+ dev_err(&phy->dev, "pll relock timeout!\n");
+ goto err_pll_lock;
+ }
+
+err_out:
+ mutex_unlock(&rk_phy->pcie_mutex);
+ return 0;
+
+err_pll_lock:
+ reset_control_assert(rk_phy->phy_rst);
+err_pwr_cnt:
+ rk_phy->pwr_cnt--;
+ mutex_unlock(&rk_phy->pcie_mutex);
+ return err;
+}
+
+static int rockchip_pcie_phy_init(struct phy *phy)
+{
+ struct phy_pcie_instance *inst = phy_get_drvdata(phy);
+ struct rockchip_pcie_phy *rk_phy = to_pcie_phy(inst);
+ int err = 0;
+
+ mutex_lock(&rk_phy->pcie_mutex);
+
+ if (rk_phy->init_cnt++)
+ goto err_out;
+
+ err = clk_prepare_enable(rk_phy->clk_pciephy_ref);
+ if (err) {
+ dev_err(&phy->dev, "Fail to enable pcie ref clock.\n");
+ goto err_refclk;
+ }
+
+ err = reset_control_assert(rk_phy->phy_rst);
+ if (err) {
+ dev_err(&phy->dev, "assert phy_rst err %d\n", err);
+ goto err_reset;
+ }
+
+err_out:
+ mutex_unlock(&rk_phy->pcie_mutex);
+ return 0;
+
+err_reset:
+
+ clk_disable_unprepare(rk_phy->clk_pciephy_ref);
+err_refclk:
+ rk_phy->init_cnt--;
+ mutex_unlock(&rk_phy->pcie_mutex);
+ return err;
+}
+
+static int rockchip_pcie_phy_exit(struct phy *phy)
+{
+ struct phy_pcie_instance *inst = phy_get_drvdata(phy);
+ struct rockchip_pcie_phy *rk_phy = to_pcie_phy(inst);
+
+ mutex_lock(&rk_phy->pcie_mutex);
+
+ if (--rk_phy->init_cnt)
+ goto err_init_cnt;
+
+ clk_disable_unprepare(rk_phy->clk_pciephy_ref);
+
+err_init_cnt:
+ mutex_unlock(&rk_phy->pcie_mutex);
+ return 0;
+}
+
+static const struct phy_ops ops = {
+ .init = rockchip_pcie_phy_init,
+ .exit = rockchip_pcie_phy_exit,
+ .power_on = rockchip_pcie_phy_power_on,
+ .power_off = rockchip_pcie_phy_power_off,
+ .owner = THIS_MODULE,
+};
+
+static const struct rockchip_pcie_data rk3399_pcie_data = {
+ .pcie_conf = 0xe220,
+ .pcie_status = 0xe2a4,
+ .pcie_laneoff = 0xe214,
+};
+
+static const struct of_device_id rockchip_pcie_phy_dt_ids[] = {
+ {
+ .compatible = "rockchip,rk3399-pcie-phy",
+ .data = &rk3399_pcie_data,
+ },
+ {}
+};
+
+MODULE_DEVICE_TABLE(of, rockchip_pcie_phy_dt_ids);
+
+static int rockchip_pcie_phy_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct rockchip_pcie_phy *rk_phy;
+ struct phy_provider *phy_provider;
+ struct regmap *grf;
+ const struct of_device_id *of_id;
+ int i;
+ u32 phy_num;
+
+ grf = syscon_node_to_regmap(dev->parent->of_node);
+ if (IS_ERR(grf)) {
+ dev_err(dev, "Cannot find GRF syscon\n");
+ return PTR_ERR(grf);
+ }
+
+ rk_phy = devm_kzalloc(dev, sizeof(*rk_phy), GFP_KERNEL);
+ if (!rk_phy)
+ return -ENOMEM;
+
+ of_id = of_match_device(rockchip_pcie_phy_dt_ids, &pdev->dev);
+ if (!of_id)
+ return -EINVAL;
+
+ rk_phy->phy_data = (struct rockchip_pcie_data *)of_id->data;
+ rk_phy->reg_base = grf;
+
+ mutex_init(&rk_phy->pcie_mutex);
+
+ rk_phy->phy_rst = devm_reset_control_get(dev, "phy");
+ if (IS_ERR(rk_phy->phy_rst)) {
+ if (PTR_ERR(rk_phy->phy_rst) != -EPROBE_DEFER)
+ dev_err(dev,
+ "missing phy property for reset controller\n");
+ return PTR_ERR(rk_phy->phy_rst);
+ }
+
+ rk_phy->clk_pciephy_ref = devm_clk_get(dev, "refclk");
+ if (IS_ERR(rk_phy->clk_pciephy_ref)) {
+ dev_err(dev, "refclk not found.\n");
+ return PTR_ERR(rk_phy->clk_pciephy_ref);
+ }
+
+ /* parse #phy-cells to see if it's legacy PHY model */
+ if (of_property_read_u32(dev->of_node, "#phy-cells", &phy_num))
+ return -ENOENT;
+
+ phy_num = (phy_num == 0) ? 1 : PHY_MAX_LANE_NUM;
+ dev_dbg(dev, "phy number is %d\n", phy_num);
+
+ for (i = 0; i < phy_num; i++) {
+ rk_phy->phys[i].phy = devm_phy_create(dev, dev->of_node, &ops);
+ if (IS_ERR(rk_phy->phys[i].phy)) {
+ dev_err(dev, "failed to create PHY%d\n", i);
+ return PTR_ERR(rk_phy->phys[i].phy);
+ }
+ rk_phy->phys[i].index = i;
+ phy_set_drvdata(rk_phy->phys[i].phy, &rk_phy->phys[i]);
+ }
+
+ platform_set_drvdata(pdev, rk_phy);
+ phy_provider = devm_of_phy_provider_register(dev,
+ rockchip_pcie_phy_of_xlate);
+
+ return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static struct platform_driver rockchip_pcie_driver = {
+ .probe = rockchip_pcie_phy_probe,
+ .driver = {
+ .name = "rockchip-pcie-phy",
+ .of_match_table = rockchip_pcie_phy_dt_ids,
+ },
+};
+
+module_platform_driver(rockchip_pcie_driver);
+
+MODULE_AUTHOR("Shawn Lin <shawn.lin@rock-chips.com>");
+MODULE_DESCRIPTION("Rockchip PCIe PHY driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c b/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
new file mode 100644
index 0000000000..121e5961ce
--- /dev/null
+++ b/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
@@ -0,0 +1,323 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Rockchip PCIE3.0 phy driver
+ *
+ * Copyright (C) 2022 Rockchip Electronics Co., Ltd.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy/pcie.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+
+/* Register for RK3568 */
+#define GRF_PCIE30PHY_CON1 0x4
+#define GRF_PCIE30PHY_CON6 0x18
+#define GRF_PCIE30PHY_CON9 0x24
+#define GRF_PCIE30PHY_DA_OCM (BIT(15) | BIT(31))
+#define GRF_PCIE30PHY_STATUS0 0x80
+#define GRF_PCIE30PHY_WR_EN (0xf << 16)
+#define SRAM_INIT_DONE(reg) (reg & BIT(14))
+
+#define RK3568_BIFURCATION_LANE_0_1 BIT(0)
+
+/* Register for RK3588 */
+#define PHP_GRF_PCIESEL_CON 0x100
+#define RK3588_PCIE3PHY_GRF_CMN_CON0 0x0
+#define RK3588_PCIE3PHY_GRF_PHY0_STATUS1 0x904
+#define RK3588_PCIE3PHY_GRF_PHY1_STATUS1 0xa04
+#define RK3588_SRAM_INIT_DONE(reg) (reg & BIT(0))
+
+#define RK3588_BIFURCATION_LANE_0_1 BIT(0)
+#define RK3588_BIFURCATION_LANE_2_3 BIT(1)
+#define RK3588_LANE_AGGREGATION BIT(2)
+
+struct rockchip_p3phy_ops;
+
+struct rockchip_p3phy_priv {
+ const struct rockchip_p3phy_ops *ops;
+ void __iomem *mmio;
+ /* mode: RC, EP */
+ int mode;
+ /* pcie30_phymode: Aggregation, Bifurcation */
+ int pcie30_phymode;
+ struct regmap *phy_grf;
+ struct regmap *pipe_grf;
+ struct reset_control *p30phy;
+ struct phy *phy;
+ struct clk_bulk_data *clks;
+ int num_clks;
+ int num_lanes;
+ u32 lanes[4];
+};
+
+struct rockchip_p3phy_ops {
+ int (*phy_init)(struct rockchip_p3phy_priv *priv);
+};
+
+static int rockchip_p3phy_set_mode(struct phy *phy, enum phy_mode mode, int submode)
+{
+ struct rockchip_p3phy_priv *priv = phy_get_drvdata(phy);
+
+ /* Actually We don't care EP/RC mode, but just record it */
+ switch (submode) {
+ case PHY_MODE_PCIE_RC:
+ priv->mode = PHY_MODE_PCIE_RC;
+ break;
+ case PHY_MODE_PCIE_EP:
+ priv->mode = PHY_MODE_PCIE_EP;
+ break;
+ default:
+ dev_err(&phy->dev, "%s, invalid mode\n", __func__);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int rockchip_p3phy_rk3568_init(struct rockchip_p3phy_priv *priv)
+{
+ struct phy *phy = priv->phy;
+ bool bifurcation = false;
+ int ret;
+ u32 reg;
+
+ /* Deassert PCIe PMA output clamp mode */
+ regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON9, GRF_PCIE30PHY_DA_OCM);
+
+ for (int i = 0; i < priv->num_lanes; i++) {
+ dev_info(&phy->dev, "lane number %d, val %d\n", i, priv->lanes[i]);
+ if (priv->lanes[i] > 1)
+ bifurcation = true;
+ }
+
+ /* Set bifurcation if needed, and it doesn't care RC/EP */
+ if (bifurcation) {
+ dev_info(&phy->dev, "bifurcation enabled\n");
+ regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON6,
+ GRF_PCIE30PHY_WR_EN | RK3568_BIFURCATION_LANE_0_1);
+ regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON1,
+ GRF_PCIE30PHY_DA_OCM);
+ } else {
+ dev_dbg(&phy->dev, "bifurcation disabled\n");
+ regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON6,
+ GRF_PCIE30PHY_WR_EN & ~RK3568_BIFURCATION_LANE_0_1);
+ }
+
+ reset_control_deassert(priv->p30phy);
+
+ ret = regmap_read_poll_timeout(priv->phy_grf,
+ GRF_PCIE30PHY_STATUS0,
+ reg, SRAM_INIT_DONE(reg),
+ 0, 500);
+ if (ret)
+ dev_err(&priv->phy->dev, "%s: lock failed 0x%x, check input refclk and power supply\n",
+ __func__, reg);
+ return ret;
+}
+
+static const struct rockchip_p3phy_ops rk3568_ops = {
+ .phy_init = rockchip_p3phy_rk3568_init,
+};
+
+static int rockchip_p3phy_rk3588_init(struct rockchip_p3phy_priv *priv)
+{
+ u32 reg = 0;
+ u8 mode = 0;
+ int ret;
+
+ /* Deassert PCIe PMA output clamp mode */
+ regmap_write(priv->phy_grf, RK3588_PCIE3PHY_GRF_CMN_CON0, BIT(8) | BIT(24));
+
+ /* Set bifurcation if needed */
+ for (int i = 0; i < priv->num_lanes; i++) {
+ if (!priv->lanes[i])
+ mode |= (BIT(i) << 3);
+
+ if (priv->lanes[i] > 1)
+ mode |= (BIT(i) >> 1);
+ }
+
+ if (!mode)
+ reg = RK3588_LANE_AGGREGATION;
+ else {
+ if (mode & (BIT(0) | BIT(1)))
+ reg |= RK3588_BIFURCATION_LANE_0_1;
+
+ if (mode & (BIT(2) | BIT(3)))
+ reg |= RK3588_BIFURCATION_LANE_2_3;
+ }
+
+ regmap_write(priv->phy_grf, RK3588_PCIE3PHY_GRF_CMN_CON0, (0x7<<16) | reg);
+
+ /* Set pcie1ln_sel in PHP_GRF_PCIESEL_CON */
+ if (!IS_ERR(priv->pipe_grf)) {
+ reg = (mode & (BIT(6) | BIT(7))) >> 6;
+ if (reg)
+ regmap_write(priv->pipe_grf, PHP_GRF_PCIESEL_CON,
+ (reg << 16) | reg);
+ }
+
+ reset_control_deassert(priv->p30phy);
+
+ ret = regmap_read_poll_timeout(priv->phy_grf,
+ RK3588_PCIE3PHY_GRF_PHY0_STATUS1,
+ reg, RK3588_SRAM_INIT_DONE(reg),
+ 0, 500);
+ ret |= regmap_read_poll_timeout(priv->phy_grf,
+ RK3588_PCIE3PHY_GRF_PHY1_STATUS1,
+ reg, RK3588_SRAM_INIT_DONE(reg),
+ 0, 500);
+ if (ret)
+ dev_err(&priv->phy->dev, "lock failed 0x%x, check input refclk and power supply\n",
+ reg);
+ return ret;
+}
+
+static const struct rockchip_p3phy_ops rk3588_ops = {
+ .phy_init = rockchip_p3phy_rk3588_init,
+};
+
+static int rochchip_p3phy_init(struct phy *phy)
+{
+ struct rockchip_p3phy_priv *priv = phy_get_drvdata(phy);
+ int ret;
+
+ ret = clk_bulk_prepare_enable(priv->num_clks, priv->clks);
+ if (ret) {
+ dev_err(&priv->phy->dev, "failed to enable PCIe bulk clks %d\n", ret);
+ return ret;
+ }
+
+ reset_control_assert(priv->p30phy);
+ udelay(1);
+
+ if (priv->ops->phy_init) {
+ ret = priv->ops->phy_init(priv);
+ if (ret)
+ clk_bulk_disable_unprepare(priv->num_clks, priv->clks);
+ }
+
+ return ret;
+}
+
+static int rochchip_p3phy_exit(struct phy *phy)
+{
+ struct rockchip_p3phy_priv *priv = phy_get_drvdata(phy);
+
+ clk_bulk_disable_unprepare(priv->num_clks, priv->clks);
+ reset_control_assert(priv->p30phy);
+ return 0;
+}
+
+static const struct phy_ops rochchip_p3phy_ops = {
+ .init = rochchip_p3phy_init,
+ .exit = rochchip_p3phy_exit,
+ .set_mode = rockchip_p3phy_set_mode,
+ .owner = THIS_MODULE,
+};
+
+static int rockchip_p3phy_probe(struct platform_device *pdev)
+{
+ struct phy_provider *phy_provider;
+ struct device *dev = &pdev->dev;
+ struct rockchip_p3phy_priv *priv;
+ struct device_node *np = dev->of_node;
+ int ret;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->mmio = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
+ if (IS_ERR(priv->mmio)) {
+ ret = PTR_ERR(priv->mmio);
+ return ret;
+ }
+
+ priv->ops = of_device_get_match_data(&pdev->dev);
+ if (!priv->ops) {
+ dev_err(dev, "no of match data provided\n");
+ return -EINVAL;
+ }
+
+ priv->phy_grf = syscon_regmap_lookup_by_phandle(np, "rockchip,phy-grf");
+ if (IS_ERR(priv->phy_grf)) {
+ dev_err(dev, "failed to find rockchip,phy_grf regmap\n");
+ return PTR_ERR(priv->phy_grf);
+ }
+
+ if (of_device_is_compatible(np, "rockchip,rk3588-pcie3-phy")) {
+ priv->pipe_grf =
+ syscon_regmap_lookup_by_phandle(dev->of_node,
+ "rockchip,pipe-grf");
+ if (IS_ERR(priv->pipe_grf))
+ dev_info(dev, "failed to find rockchip,pipe_grf regmap\n");
+ } else {
+ priv->pipe_grf = NULL;
+ }
+
+ priv->num_lanes = of_property_read_variable_u32_array(dev->of_node, "data-lanes",
+ priv->lanes, 2,
+ ARRAY_SIZE(priv->lanes));
+
+ /* if no data-lanes assume aggregation */
+ if (priv->num_lanes == -EINVAL) {
+ dev_dbg(dev, "no data-lanes property found\n");
+ priv->num_lanes = 1;
+ priv->lanes[0] = 1;
+ } else if (priv->num_lanes < 0) {
+ dev_err(dev, "failed to read data-lanes property %d\n", priv->num_lanes);
+ return priv->num_lanes;
+ }
+
+ priv->phy = devm_phy_create(dev, NULL, &rochchip_p3phy_ops);
+ if (IS_ERR(priv->phy)) {
+ dev_err(dev, "failed to create combphy\n");
+ return PTR_ERR(priv->phy);
+ }
+
+ priv->p30phy = devm_reset_control_get_optional_exclusive(dev, "phy");
+ if (IS_ERR(priv->p30phy)) {
+ return dev_err_probe(dev, PTR_ERR(priv->p30phy),
+ "failed to get phy reset control\n");
+ }
+ if (!priv->p30phy)
+ dev_info(dev, "no phy reset control specified\n");
+
+ priv->num_clks = devm_clk_bulk_get_all(dev, &priv->clks);
+ if (priv->num_clks < 1)
+ return -ENODEV;
+
+ dev_set_drvdata(dev, priv);
+ phy_set_drvdata(priv->phy, priv);
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+ return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id rockchip_p3phy_of_match[] = {
+ { .compatible = "rockchip,rk3568-pcie3-phy", .data = &rk3568_ops },
+ { .compatible = "rockchip,rk3588-pcie3-phy", .data = &rk3588_ops },
+ { },
+};
+MODULE_DEVICE_TABLE(of, rockchip_p3phy_of_match);
+
+static struct platform_driver rockchip_p3phy_driver = {
+ .probe = rockchip_p3phy_probe,
+ .driver = {
+ .name = "rockchip-snps-pcie3-phy",
+ .of_match_table = rockchip_p3phy_of_match,
+ },
+};
+module_platform_driver(rockchip_p3phy_driver);
+MODULE_DESCRIPTION("Rockchip Synopsys PCIe 3.0 PHY driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/phy/rockchip/phy-rockchip-typec.c b/drivers/phy/rockchip/phy-rockchip-typec.c
new file mode 100644
index 0000000000..4efcb78b0a
--- /dev/null
+++ b/drivers/phy/rockchip/phy-rockchip-typec.c
@@ -0,0 +1,1225 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) Fuzhou Rockchip Electronics Co.Ltd
+ * Author: Chris Zhong <zyw@rock-chips.com>
+ * Kever Yang <kever.yang@rock-chips.com>
+ *
+ * The ROCKCHIP Type-C PHY has two PLL clocks. The first PLL clock
+ * is used for USB3, the second PLL clock is used for DP. This Type-C PHY has
+ * 3 working modes: USB3 only mode, DP only mode, and USB3+DP mode.
+ * At USB3 only mode, both PLL clocks need to be initialized, this allows the
+ * PHY to switch mode between USB3 and USB3+DP, without disconnecting the USB
+ * device.
+ * In The DP only mode, only the DP PLL needs to be powered on, and the 4 lanes
+ * are all used for DP.
+ *
+ * This driver gets extcon cable state and property, then decides which mode to
+ * select:
+ *
+ * 1. USB3 only mode:
+ * EXTCON_USB or EXTCON_USB_HOST state is true, and
+ * EXTCON_PROP_USB_SS property is true.
+ * EXTCON_DISP_DP state is false.
+ *
+ * 2. DP only mode:
+ * EXTCON_DISP_DP state is true, and
+ * EXTCON_PROP_USB_SS property is false.
+ * If EXTCON_USB_HOST state is true, it is DP + USB2 mode, since the USB2 phy
+ * is a separate phy, so this case is still DP only mode.
+ *
+ * 3. USB3+DP mode:
+ * EXTCON_USB_HOST and EXTCON_DISP_DP are both true, and
+ * EXTCON_PROP_USB_SS property is true.
+ *
+ * This Type-C PHY driver supports normal and flip orientation. The orientation
+ * is reported by the EXTCON_PROP_USB_TYPEC_POLARITY property: true is flip
+ * orientation, false is normal orientation.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/extcon.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+
+#include <linux/mfd/syscon.h>
+#include <linux/phy/phy.h>
+
+#define CMN_SSM_BANDGAP (0x21 << 2)
+#define CMN_SSM_BIAS (0x22 << 2)
+#define CMN_PLLSM0_PLLEN (0x29 << 2)
+#define CMN_PLLSM0_PLLPRE (0x2a << 2)
+#define CMN_PLLSM0_PLLVREF (0x2b << 2)
+#define CMN_PLLSM0_PLLLOCK (0x2c << 2)
+#define CMN_PLLSM1_PLLEN (0x31 << 2)
+#define CMN_PLLSM1_PLLPRE (0x32 << 2)
+#define CMN_PLLSM1_PLLVREF (0x33 << 2)
+#define CMN_PLLSM1_PLLLOCK (0x34 << 2)
+#define CMN_PLLSM1_USER_DEF_CTRL (0x37 << 2)
+#define CMN_ICAL_OVRD (0xc1 << 2)
+#define CMN_PLL0_VCOCAL_OVRD (0x83 << 2)
+#define CMN_PLL0_VCOCAL_INIT (0x84 << 2)
+#define CMN_PLL0_VCOCAL_ITER (0x85 << 2)
+#define CMN_PLL0_LOCK_REFCNT_START (0x90 << 2)
+#define CMN_PLL0_LOCK_PLLCNT_START (0x92 << 2)
+#define CMN_PLL0_LOCK_PLLCNT_THR (0x93 << 2)
+#define CMN_PLL0_INTDIV (0x94 << 2)
+#define CMN_PLL0_FRACDIV (0x95 << 2)
+#define CMN_PLL0_HIGH_THR (0x96 << 2)
+#define CMN_PLL0_DSM_DIAG (0x97 << 2)
+#define CMN_PLL0_SS_CTRL1 (0x98 << 2)
+#define CMN_PLL0_SS_CTRL2 (0x99 << 2)
+#define CMN_PLL1_VCOCAL_START (0xa1 << 2)
+#define CMN_PLL1_VCOCAL_OVRD (0xa3 << 2)
+#define CMN_PLL1_VCOCAL_INIT (0xa4 << 2)
+#define CMN_PLL1_VCOCAL_ITER (0xa5 << 2)
+#define CMN_PLL1_LOCK_REFCNT_START (0xb0 << 2)
+#define CMN_PLL1_LOCK_PLLCNT_START (0xb2 << 2)
+#define CMN_PLL1_LOCK_PLLCNT_THR (0xb3 << 2)
+#define CMN_PLL1_INTDIV (0xb4 << 2)
+#define CMN_PLL1_FRACDIV (0xb5 << 2)
+#define CMN_PLL1_HIGH_THR (0xb6 << 2)
+#define CMN_PLL1_DSM_DIAG (0xb7 << 2)
+#define CMN_PLL1_SS_CTRL1 (0xb8 << 2)
+#define CMN_PLL1_SS_CTRL2 (0xb9 << 2)
+#define CMN_RXCAL_OVRD (0xd1 << 2)
+
+#define CMN_TXPUCAL_CTRL (0xe0 << 2)
+#define CMN_TXPUCAL_OVRD (0xe1 << 2)
+#define CMN_TXPDCAL_CTRL (0xf0 << 2)
+#define CMN_TXPDCAL_OVRD (0xf1 << 2)
+
+/* For CMN_TXPUCAL_CTRL, CMN_TXPDCAL_CTRL */
+#define CMN_TXPXCAL_START BIT(15)
+#define CMN_TXPXCAL_DONE BIT(14)
+#define CMN_TXPXCAL_NO_RESPONSE BIT(13)
+#define CMN_TXPXCAL_CURRENT_RESPONSE BIT(12)
+
+#define CMN_TXPU_ADJ_CTRL (0x108 << 2)
+#define CMN_TXPD_ADJ_CTRL (0x10c << 2)
+
+/*
+ * For CMN_TXPUCAL_CTRL, CMN_TXPDCAL_CTRL,
+ * CMN_TXPU_ADJ_CTRL, CMN_TXPDCAL_CTRL
+ *
+ * NOTE: some of these registers are documented to be 2's complement
+ * signed numbers, but then documented to be always positive. Weird.
+ * In such a case, using CMN_CALIB_CODE_POS() avoids the unnecessary
+ * sign extension.
+ */
+#define CMN_CALIB_CODE_WIDTH 7
+#define CMN_CALIB_CODE_OFFSET 0
+#define CMN_CALIB_CODE_MASK GENMASK(CMN_CALIB_CODE_WIDTH, 0)
+#define CMN_CALIB_CODE(x) \
+ sign_extend32((x) >> CMN_CALIB_CODE_OFFSET, CMN_CALIB_CODE_WIDTH)
+
+#define CMN_CALIB_CODE_POS_MASK GENMASK(CMN_CALIB_CODE_WIDTH - 1, 0)
+#define CMN_CALIB_CODE_POS(x) \
+ (((x) >> CMN_CALIB_CODE_OFFSET) & CMN_CALIB_CODE_POS_MASK)
+
+#define CMN_DIAG_PLL0_FBH_OVRD (0x1c0 << 2)
+#define CMN_DIAG_PLL0_FBL_OVRD (0x1c1 << 2)
+#define CMN_DIAG_PLL0_OVRD (0x1c2 << 2)
+#define CMN_DIAG_PLL0_V2I_TUNE (0x1c5 << 2)
+#define CMN_DIAG_PLL0_CP_TUNE (0x1c6 << 2)
+#define CMN_DIAG_PLL0_LF_PROG (0x1c7 << 2)
+#define CMN_DIAG_PLL1_FBH_OVRD (0x1d0 << 2)
+#define CMN_DIAG_PLL1_FBL_OVRD (0x1d1 << 2)
+#define CMN_DIAG_PLL1_OVRD (0x1d2 << 2)
+#define CMN_DIAG_PLL1_V2I_TUNE (0x1d5 << 2)
+#define CMN_DIAG_PLL1_CP_TUNE (0x1d6 << 2)
+#define CMN_DIAG_PLL1_LF_PROG (0x1d7 << 2)
+#define CMN_DIAG_PLL1_PTATIS_TUNE1 (0x1d8 << 2)
+#define CMN_DIAG_PLL1_PTATIS_TUNE2 (0x1d9 << 2)
+#define CMN_DIAG_PLL1_INCLK_CTRL (0x1da << 2)
+#define CMN_DIAG_HSCLK_SEL (0x1e0 << 2)
+
+#define XCVR_PSM_RCTRL(n) ((0x4001 | ((n) << 9)) << 2)
+#define XCVR_PSM_CAL_TMR(n) ((0x4002 | ((n) << 9)) << 2)
+#define XCVR_PSM_A0IN_TMR(n) ((0x4003 | ((n) << 9)) << 2)
+#define TX_TXCC_CAL_SCLR_MULT(n) ((0x4047 | ((n) << 9)) << 2)
+#define TX_TXCC_CPOST_MULT_00(n) ((0x404c | ((n) << 9)) << 2)
+#define TX_TXCC_CPOST_MULT_01(n) ((0x404d | ((n) << 9)) << 2)
+#define TX_TXCC_CPOST_MULT_10(n) ((0x404e | ((n) << 9)) << 2)
+#define TX_TXCC_CPOST_MULT_11(n) ((0x404f | ((n) << 9)) << 2)
+#define TX_TXCC_MGNFS_MULT_000(n) ((0x4050 | ((n) << 9)) << 2)
+#define TX_TXCC_MGNFS_MULT_001(n) ((0x4051 | ((n) << 9)) << 2)
+#define TX_TXCC_MGNFS_MULT_010(n) ((0x4052 | ((n) << 9)) << 2)
+#define TX_TXCC_MGNFS_MULT_011(n) ((0x4053 | ((n) << 9)) << 2)
+#define TX_TXCC_MGNFS_MULT_100(n) ((0x4054 | ((n) << 9)) << 2)
+#define TX_TXCC_MGNFS_MULT_101(n) ((0x4055 | ((n) << 9)) << 2)
+#define TX_TXCC_MGNFS_MULT_110(n) ((0x4056 | ((n) << 9)) << 2)
+#define TX_TXCC_MGNFS_MULT_111(n) ((0x4057 | ((n) << 9)) << 2)
+#define TX_TXCC_MGNLS_MULT_000(n) ((0x4058 | ((n) << 9)) << 2)
+#define TX_TXCC_MGNLS_MULT_001(n) ((0x4059 | ((n) << 9)) << 2)
+#define TX_TXCC_MGNLS_MULT_010(n) ((0x405a | ((n) << 9)) << 2)
+#define TX_TXCC_MGNLS_MULT_011(n) ((0x405b | ((n) << 9)) << 2)
+#define TX_TXCC_MGNLS_MULT_100(n) ((0x405c | ((n) << 9)) << 2)
+#define TX_TXCC_MGNLS_MULT_101(n) ((0x405d | ((n) << 9)) << 2)
+#define TX_TXCC_MGNLS_MULT_110(n) ((0x405e | ((n) << 9)) << 2)
+#define TX_TXCC_MGNLS_MULT_111(n) ((0x405f | ((n) << 9)) << 2)
+
+#define XCVR_DIAG_PLLDRC_CTRL(n) ((0x40e0 | ((n) << 9)) << 2)
+#define XCVR_DIAG_BIDI_CTRL(n) ((0x40e8 | ((n) << 9)) << 2)
+#define XCVR_DIAG_LANE_FCM_EN_MGN(n) ((0x40f2 | ((n) << 9)) << 2)
+#define TX_PSC_A0(n) ((0x4100 | ((n) << 9)) << 2)
+#define TX_PSC_A1(n) ((0x4101 | ((n) << 9)) << 2)
+#define TX_PSC_A2(n) ((0x4102 | ((n) << 9)) << 2)
+#define TX_PSC_A3(n) ((0x4103 | ((n) << 9)) << 2)
+#define TX_RCVDET_CTRL(n) ((0x4120 | ((n) << 9)) << 2)
+#define TX_RCVDET_EN_TMR(n) ((0x4122 | ((n) << 9)) << 2)
+#define TX_RCVDET_ST_TMR(n) ((0x4123 | ((n) << 9)) << 2)
+#define TX_DIAG_TX_DRV(n) ((0x41e1 | ((n) << 9)) << 2)
+#define TX_DIAG_BGREF_PREDRV_DELAY (0x41e7 << 2)
+
+/* Use this for "n" in macros like "_MULT_XXX" to target the aux channel */
+#define AUX_CH_LANE 8
+
+#define TX_ANA_CTRL_REG_1 (0x5020 << 2)
+
+#define TXDA_DP_AUX_EN BIT(15)
+#define AUXDA_SE_EN BIT(14)
+#define TXDA_CAL_LATCH_EN BIT(13)
+#define AUXDA_POLARITY BIT(12)
+#define TXDA_DRV_POWER_ISOLATION_EN BIT(11)
+#define TXDA_DRV_POWER_EN_PH_2_N BIT(10)
+#define TXDA_DRV_POWER_EN_PH_1_N BIT(9)
+#define TXDA_BGREF_EN BIT(8)
+#define TXDA_DRV_LDO_EN BIT(7)
+#define TXDA_DECAP_EN_DEL BIT(6)
+#define TXDA_DECAP_EN BIT(5)
+#define TXDA_UPHY_SUPPLY_EN_DEL BIT(4)
+#define TXDA_UPHY_SUPPLY_EN BIT(3)
+#define TXDA_LOW_LEAKAGE_EN BIT(2)
+#define TXDA_DRV_IDLE_LOWI_EN BIT(1)
+#define TXDA_DRV_CMN_MODE_EN BIT(0)
+
+#define TX_ANA_CTRL_REG_2 (0x5021 << 2)
+
+#define AUXDA_DEBOUNCING_CLK BIT(15)
+#define TXDA_LPBK_RECOVERED_CLK_EN BIT(14)
+#define TXDA_LPBK_ISI_GEN_EN BIT(13)
+#define TXDA_LPBK_SERIAL_EN BIT(12)
+#define TXDA_LPBK_LINE_EN BIT(11)
+#define TXDA_DRV_LDO_REDC_SINKIQ BIT(10)
+#define XCVR_DECAP_EN_DEL BIT(9)
+#define XCVR_DECAP_EN BIT(8)
+#define TXDA_MPHY_ENABLE_HS_NT BIT(7)
+#define TXDA_MPHY_SA_MODE BIT(6)
+#define TXDA_DRV_LDO_RBYR_FB_EN BIT(5)
+#define TXDA_DRV_RST_PULL_DOWN BIT(4)
+#define TXDA_DRV_LDO_BG_FB_EN BIT(3)
+#define TXDA_DRV_LDO_BG_REF_EN BIT(2)
+#define TXDA_DRV_PREDRV_EN_DEL BIT(1)
+#define TXDA_DRV_PREDRV_EN BIT(0)
+
+#define TXDA_COEFF_CALC_CTRL (0x5022 << 2)
+
+#define TX_HIGH_Z BIT(6)
+#define TX_VMARGIN_OFFSET 3
+#define TX_VMARGIN_MASK 0x7
+#define LOW_POWER_SWING_EN BIT(2)
+#define TX_FCM_DRV_MAIN_EN BIT(1)
+#define TX_FCM_FULL_MARGIN BIT(0)
+
+#define TX_DIG_CTRL_REG_2 (0x5024 << 2)
+
+#define TX_HIGH_Z_TM_EN BIT(15)
+#define TX_RESCAL_CODE_OFFSET 0
+#define TX_RESCAL_CODE_MASK 0x3f
+
+#define TXDA_CYA_AUXDA_CYA (0x5025 << 2)
+#define TX_ANA_CTRL_REG_3 (0x5026 << 2)
+#define TX_ANA_CTRL_REG_4 (0x5027 << 2)
+#define TX_ANA_CTRL_REG_5 (0x5029 << 2)
+
+#define RX_PSC_A0(n) ((0x8000 | ((n) << 9)) << 2)
+#define RX_PSC_A1(n) ((0x8001 | ((n) << 9)) << 2)
+#define RX_PSC_A2(n) ((0x8002 | ((n) << 9)) << 2)
+#define RX_PSC_A3(n) ((0x8003 | ((n) << 9)) << 2)
+#define RX_PSC_CAL(n) ((0x8006 | ((n) << 9)) << 2)
+#define RX_PSC_RDY(n) ((0x8007 | ((n) << 9)) << 2)
+#define RX_IQPI_ILL_CAL_OVRD (0x8023 << 2)
+#define RX_EPI_ILL_CAL_OVRD (0x8033 << 2)
+#define RX_SDCAL0_OVRD (0x8041 << 2)
+#define RX_SDCAL1_OVRD (0x8049 << 2)
+#define RX_SLC_INIT (0x806d << 2)
+#define RX_SLC_RUN (0x806e << 2)
+#define RX_CDRLF_CNFG2 (0x8081 << 2)
+#define RX_SIGDET_HL_FILT_TMR(n) ((0x8090 | ((n) << 9)) << 2)
+#define RX_SLC_IOP0_OVRD (0x8101 << 2)
+#define RX_SLC_IOP1_OVRD (0x8105 << 2)
+#define RX_SLC_QOP0_OVRD (0x8109 << 2)
+#define RX_SLC_QOP1_OVRD (0x810d << 2)
+#define RX_SLC_EOP0_OVRD (0x8111 << 2)
+#define RX_SLC_EOP1_OVRD (0x8115 << 2)
+#define RX_SLC_ION0_OVRD (0x8119 << 2)
+#define RX_SLC_ION1_OVRD (0x811d << 2)
+#define RX_SLC_QON0_OVRD (0x8121 << 2)
+#define RX_SLC_QON1_OVRD (0x8125 << 2)
+#define RX_SLC_EON0_OVRD (0x8129 << 2)
+#define RX_SLC_EON1_OVRD (0x812d << 2)
+#define RX_SLC_IEP0_OVRD (0x8131 << 2)
+#define RX_SLC_IEP1_OVRD (0x8135 << 2)
+#define RX_SLC_QEP0_OVRD (0x8139 << 2)
+#define RX_SLC_QEP1_OVRD (0x813d << 2)
+#define RX_SLC_EEP0_OVRD (0x8141 << 2)
+#define RX_SLC_EEP1_OVRD (0x8145 << 2)
+#define RX_SLC_IEN0_OVRD (0x8149 << 2)
+#define RX_SLC_IEN1_OVRD (0x814d << 2)
+#define RX_SLC_QEN0_OVRD (0x8151 << 2)
+#define RX_SLC_QEN1_OVRD (0x8155 << 2)
+#define RX_SLC_EEN0_OVRD (0x8159 << 2)
+#define RX_SLC_EEN1_OVRD (0x815d << 2)
+#define RX_REE_CTRL_DATA_MASK(n) ((0x81bb | ((n) << 9)) << 2)
+#define RX_DIAG_SIGDET_TUNE(n) ((0x81dc | ((n) << 9)) << 2)
+#define RX_DIAG_SC2C_DELAY (0x81e1 << 2)
+
+#define PMA_LANE_CFG (0xc000 << 2)
+#define PIPE_CMN_CTRL1 (0xc001 << 2)
+#define PIPE_CMN_CTRL2 (0xc002 << 2)
+#define PIPE_COM_LOCK_CFG1 (0xc003 << 2)
+#define PIPE_COM_LOCK_CFG2 (0xc004 << 2)
+#define PIPE_RCV_DET_INH (0xc005 << 2)
+#define DP_MODE_CTL (0xc008 << 2)
+#define DP_CLK_CTL (0xc009 << 2)
+#define STS (0xc00F << 2)
+#define PHY_ISO_CMN_CTRL (0xc010 << 2)
+#define PHY_DP_TX_CTL (0xc408 << 2)
+#define PMA_CMN_CTRL1 (0xc800 << 2)
+#define PHY_PMA_ISO_CMN_CTRL (0xc810 << 2)
+#define PHY_ISOLATION_CTRL (0xc81f << 2)
+#define PHY_PMA_ISO_XCVR_CTRL(n) ((0xcc11 | ((n) << 6)) << 2)
+#define PHY_PMA_ISO_LINK_MODE(n) ((0xcc12 | ((n) << 6)) << 2)
+#define PHY_PMA_ISO_PWRST_CTRL(n) ((0xcc13 | ((n) << 6)) << 2)
+#define PHY_PMA_ISO_TX_DATA_LO(n) ((0xcc14 | ((n) << 6)) << 2)
+#define PHY_PMA_ISO_TX_DATA_HI(n) ((0xcc15 | ((n) << 6)) << 2)
+#define PHY_PMA_ISO_RX_DATA_LO(n) ((0xcc16 | ((n) << 6)) << 2)
+#define PHY_PMA_ISO_RX_DATA_HI(n) ((0xcc17 | ((n) << 6)) << 2)
+#define TX_BIST_CTRL(n) ((0x4140 | ((n) << 9)) << 2)
+#define TX_BIST_UDDWR(n) ((0x4141 | ((n) << 9)) << 2)
+
+/*
+ * Selects which PLL clock will be driven on the analog high speed
+ * clock 0: PLL 0 div 1
+ * clock 1: PLL 1 div 2
+ */
+#define CLK_PLL_CONFIG 0X30
+#define CLK_PLL_MASK 0x33
+
+#define CMN_READY BIT(0)
+
+#define DP_PLL_CLOCK_ENABLE BIT(2)
+#define DP_PLL_ENABLE BIT(0)
+#define DP_PLL_DATA_RATE_RBR ((2 << 12) | (4 << 8))
+#define DP_PLL_DATA_RATE_HBR ((2 << 12) | (4 << 8))
+#define DP_PLL_DATA_RATE_HBR2 ((1 << 12) | (2 << 8))
+
+#define DP_MODE_A0 BIT(4)
+#define DP_MODE_A2 BIT(6)
+#define DP_MODE_ENTER_A0 0xc101
+#define DP_MODE_ENTER_A2 0xc104
+
+#define PHY_MODE_SET_TIMEOUT 100000
+
+#define PIN_ASSIGN_C_E 0x51d9
+#define PIN_ASSIGN_D_F 0x5100
+
+#define MODE_DISCONNECT 0
+#define MODE_UFP_USB BIT(0)
+#define MODE_DFP_USB BIT(1)
+#define MODE_DFP_DP BIT(2)
+
+struct usb3phy_reg {
+ u32 offset;
+ u32 enable_bit;
+ u32 write_enable;
+};
+
+/**
+ * struct rockchip_usb3phy_port_cfg - usb3-phy port configuration.
+ * @reg: the base address for usb3-phy config.
+ * @typec_conn_dir: the register of type-c connector direction.
+ * @usb3tousb2_en: the register of type-c force usb2 to usb2 enable.
+ * @external_psm: the register of type-c phy external psm clock.
+ * @pipe_status: the register of type-c phy pipe status.
+ * @usb3_host_disable: the register of type-c usb3 host disable.
+ * @usb3_host_port: the register of type-c usb3 host port.
+ * @uphy_dp_sel: the register of type-c phy DP select control.
+ */
+struct rockchip_usb3phy_port_cfg {
+ unsigned int reg;
+ struct usb3phy_reg typec_conn_dir;
+ struct usb3phy_reg usb3tousb2_en;
+ struct usb3phy_reg external_psm;
+ struct usb3phy_reg pipe_status;
+ struct usb3phy_reg usb3_host_disable;
+ struct usb3phy_reg usb3_host_port;
+ struct usb3phy_reg uphy_dp_sel;
+};
+
+struct rockchip_typec_phy {
+ struct device *dev;
+ void __iomem *base;
+ struct extcon_dev *extcon;
+ struct regmap *grf_regs;
+ struct clk *clk_core;
+ struct clk *clk_ref;
+ struct reset_control *uphy_rst;
+ struct reset_control *pipe_rst;
+ struct reset_control *tcphy_rst;
+ const struct rockchip_usb3phy_port_cfg *port_cfgs;
+ /* mutex to protect access to individual PHYs */
+ struct mutex lock;
+
+ bool flip;
+ u8 mode;
+};
+
+struct phy_reg {
+ u16 value;
+ u32 addr;
+};
+
+static struct phy_reg usb3_pll_cfg[] = {
+ { 0xf0, CMN_PLL0_VCOCAL_INIT },
+ { 0x18, CMN_PLL0_VCOCAL_ITER },
+ { 0xd0, CMN_PLL0_INTDIV },
+ { 0x4a4a, CMN_PLL0_FRACDIV },
+ { 0x34, CMN_PLL0_HIGH_THR },
+ { 0x1ee, CMN_PLL0_SS_CTRL1 },
+ { 0x7f03, CMN_PLL0_SS_CTRL2 },
+ { 0x20, CMN_PLL0_DSM_DIAG },
+ { 0, CMN_DIAG_PLL0_OVRD },
+ { 0, CMN_DIAG_PLL0_FBH_OVRD },
+ { 0, CMN_DIAG_PLL0_FBL_OVRD },
+ { 0x7, CMN_DIAG_PLL0_V2I_TUNE },
+ { 0x45, CMN_DIAG_PLL0_CP_TUNE },
+ { 0x8, CMN_DIAG_PLL0_LF_PROG },
+};
+
+static struct phy_reg dp_pll_cfg[] = {
+ { 0xf0, CMN_PLL1_VCOCAL_INIT },
+ { 0x18, CMN_PLL1_VCOCAL_ITER },
+ { 0x30b9, CMN_PLL1_VCOCAL_START },
+ { 0x21c, CMN_PLL1_INTDIV },
+ { 0, CMN_PLL1_FRACDIV },
+ { 0x5, CMN_PLL1_HIGH_THR },
+ { 0x35, CMN_PLL1_SS_CTRL1 },
+ { 0x7f1e, CMN_PLL1_SS_CTRL2 },
+ { 0x20, CMN_PLL1_DSM_DIAG },
+ { 0, CMN_PLLSM1_USER_DEF_CTRL },
+ { 0, CMN_DIAG_PLL1_OVRD },
+ { 0, CMN_DIAG_PLL1_FBH_OVRD },
+ { 0, CMN_DIAG_PLL1_FBL_OVRD },
+ { 0x6, CMN_DIAG_PLL1_V2I_TUNE },
+ { 0x45, CMN_DIAG_PLL1_CP_TUNE },
+ { 0x8, CMN_DIAG_PLL1_LF_PROG },
+ { 0x100, CMN_DIAG_PLL1_PTATIS_TUNE1 },
+ { 0x7, CMN_DIAG_PLL1_PTATIS_TUNE2 },
+ { 0x4, CMN_DIAG_PLL1_INCLK_CTRL },
+};
+
+static const struct rockchip_usb3phy_port_cfg rk3399_usb3phy_port_cfgs[] = {
+ {
+ .reg = 0xff7c0000,
+ .typec_conn_dir = { 0xe580, 0, 16 },
+ .usb3tousb2_en = { 0xe580, 3, 19 },
+ .external_psm = { 0xe588, 14, 30 },
+ .pipe_status = { 0xe5c0, 0, 0 },
+ .usb3_host_disable = { 0x2434, 0, 16 },
+ .usb3_host_port = { 0x2434, 12, 28 },
+ .uphy_dp_sel = { 0x6268, 19, 19 },
+ },
+ {
+ .reg = 0xff800000,
+ .typec_conn_dir = { 0xe58c, 0, 16 },
+ .usb3tousb2_en = { 0xe58c, 3, 19 },
+ .external_psm = { 0xe594, 14, 30 },
+ .pipe_status = { 0xe5c0, 16, 16 },
+ .usb3_host_disable = { 0x2444, 0, 16 },
+ .usb3_host_port = { 0x2444, 12, 28 },
+ .uphy_dp_sel = { 0x6268, 3, 19 },
+ },
+ { /* sentinel */ }
+};
+
+static void tcphy_cfg_24m(struct rockchip_typec_phy *tcphy)
+{
+ u32 i, rdata;
+
+ /*
+ * cmn_ref_clk_sel = 3, select the 24Mhz for clk parent
+ * cmn_psm_clk_dig_div = 2, set the clk division to 2
+ */
+ writel(0x830, tcphy->base + PMA_CMN_CTRL1);
+ for (i = 0; i < 4; i++) {
+ /*
+ * The following PHY configuration assumes a 24 MHz reference
+ * clock.
+ */
+ writel(0x90, tcphy->base + XCVR_DIAG_LANE_FCM_EN_MGN(i));
+ writel(0x960, tcphy->base + TX_RCVDET_EN_TMR(i));
+ writel(0x30, tcphy->base + TX_RCVDET_ST_TMR(i));
+ }
+
+ rdata = readl(tcphy->base + CMN_DIAG_HSCLK_SEL);
+ rdata &= ~CLK_PLL_MASK;
+ rdata |= CLK_PLL_CONFIG;
+ writel(rdata, tcphy->base + CMN_DIAG_HSCLK_SEL);
+}
+
+static void tcphy_cfg_usb3_pll(struct rockchip_typec_phy *tcphy)
+{
+ u32 i;
+
+ /* load the configuration of PLL0 */
+ for (i = 0; i < ARRAY_SIZE(usb3_pll_cfg); i++)
+ writel(usb3_pll_cfg[i].value,
+ tcphy->base + usb3_pll_cfg[i].addr);
+}
+
+static void tcphy_cfg_dp_pll(struct rockchip_typec_phy *tcphy)
+{
+ u32 i;
+
+ /* set the default mode to RBR */
+ writel(DP_PLL_CLOCK_ENABLE | DP_PLL_ENABLE | DP_PLL_DATA_RATE_RBR,
+ tcphy->base + DP_CLK_CTL);
+
+ /* load the configuration of PLL1 */
+ for (i = 0; i < ARRAY_SIZE(dp_pll_cfg); i++)
+ writel(dp_pll_cfg[i].value, tcphy->base + dp_pll_cfg[i].addr);
+}
+
+static void tcphy_tx_usb3_cfg_lane(struct rockchip_typec_phy *tcphy, u32 lane)
+{
+ writel(0x7799, tcphy->base + TX_PSC_A0(lane));
+ writel(0x7798, tcphy->base + TX_PSC_A1(lane));
+ writel(0x5098, tcphy->base + TX_PSC_A2(lane));
+ writel(0x5098, tcphy->base + TX_PSC_A3(lane));
+ writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_000(lane));
+ writel(0xbf, tcphy->base + XCVR_DIAG_BIDI_CTRL(lane));
+}
+
+static void tcphy_rx_usb3_cfg_lane(struct rockchip_typec_phy *tcphy, u32 lane)
+{
+ writel(0xa6fd, tcphy->base + RX_PSC_A0(lane));
+ writel(0xa6fd, tcphy->base + RX_PSC_A1(lane));
+ writel(0xa410, tcphy->base + RX_PSC_A2(lane));
+ writel(0x2410, tcphy->base + RX_PSC_A3(lane));
+ writel(0x23ff, tcphy->base + RX_PSC_CAL(lane));
+ writel(0x13, tcphy->base + RX_SIGDET_HL_FILT_TMR(lane));
+ writel(0x03e7, tcphy->base + RX_REE_CTRL_DATA_MASK(lane));
+ writel(0x1004, tcphy->base + RX_DIAG_SIGDET_TUNE(lane));
+ writel(0x2010, tcphy->base + RX_PSC_RDY(lane));
+ writel(0xfb, tcphy->base + XCVR_DIAG_BIDI_CTRL(lane));
+}
+
+static void tcphy_dp_cfg_lane(struct rockchip_typec_phy *tcphy, u32 lane)
+{
+ u16 rdata;
+
+ writel(0xbefc, tcphy->base + XCVR_PSM_RCTRL(lane));
+ writel(0x6799, tcphy->base + TX_PSC_A0(lane));
+ writel(0x6798, tcphy->base + TX_PSC_A1(lane));
+ writel(0x98, tcphy->base + TX_PSC_A2(lane));
+ writel(0x98, tcphy->base + TX_PSC_A3(lane));
+
+ writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_000(lane));
+ writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_001(lane));
+ writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_010(lane));
+ writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_011(lane));
+ writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_100(lane));
+ writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_101(lane));
+ writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_110(lane));
+ writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_111(lane));
+ writel(0, tcphy->base + TX_TXCC_CPOST_MULT_10(lane));
+ writel(0, tcphy->base + TX_TXCC_CPOST_MULT_01(lane));
+ writel(0, tcphy->base + TX_TXCC_CPOST_MULT_00(lane));
+ writel(0, tcphy->base + TX_TXCC_CPOST_MULT_11(lane));
+
+ writel(0x128, tcphy->base + TX_TXCC_CAL_SCLR_MULT(lane));
+ writel(0x400, tcphy->base + TX_DIAG_TX_DRV(lane));
+
+ rdata = readl(tcphy->base + XCVR_DIAG_PLLDRC_CTRL(lane));
+ rdata = (rdata & 0x8fff) | 0x6000;
+ writel(rdata, tcphy->base + XCVR_DIAG_PLLDRC_CTRL(lane));
+}
+
+static inline int property_enable(struct rockchip_typec_phy *tcphy,
+ const struct usb3phy_reg *reg, bool en)
+{
+ u32 mask = 1 << reg->write_enable;
+ u32 val = en << reg->enable_bit;
+
+ return regmap_write(tcphy->grf_regs, reg->offset, val | mask);
+}
+
+static void tcphy_dp_aux_set_flip(struct rockchip_typec_phy *tcphy)
+{
+ u16 tx_ana_ctrl_reg_1;
+
+ /*
+ * Select the polarity of the xcvr:
+ * 1, Reverses the polarity (If TYPEC, Pulls ups aux_p and pull
+ * down aux_m)
+ * 0, Normal polarity (if TYPEC, pulls up aux_m and pulls down
+ * aux_p)
+ */
+ tx_ana_ctrl_reg_1 = readl(tcphy->base + TX_ANA_CTRL_REG_1);
+ if (!tcphy->flip)
+ tx_ana_ctrl_reg_1 |= AUXDA_POLARITY;
+ else
+ tx_ana_ctrl_reg_1 &= ~AUXDA_POLARITY;
+ writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1);
+}
+
+static void tcphy_dp_aux_calibration(struct rockchip_typec_phy *tcphy)
+{
+ u16 val;
+ u16 tx_ana_ctrl_reg_1;
+ u16 tx_ana_ctrl_reg_2;
+ s32 pu_calib_code, pd_calib_code;
+ s32 pu_adj, pd_adj;
+ u16 calib;
+
+ /*
+ * Calculate calibration code as per docs: use an average of the
+ * pull down and pull up. Then add in adjustments.
+ */
+ val = readl(tcphy->base + CMN_TXPUCAL_CTRL);
+ pu_calib_code = CMN_CALIB_CODE_POS(val);
+ val = readl(tcphy->base + CMN_TXPDCAL_CTRL);
+ pd_calib_code = CMN_CALIB_CODE_POS(val);
+ val = readl(tcphy->base + CMN_TXPU_ADJ_CTRL);
+ pu_adj = CMN_CALIB_CODE(val);
+ val = readl(tcphy->base + CMN_TXPD_ADJ_CTRL);
+ pd_adj = CMN_CALIB_CODE(val);
+ calib = (pu_calib_code + pd_calib_code) / 2 + pu_adj + pd_adj;
+
+ /* disable txda_cal_latch_en for rewrite the calibration values */
+ tx_ana_ctrl_reg_1 = readl(tcphy->base + TX_ANA_CTRL_REG_1);
+ tx_ana_ctrl_reg_1 &= ~TXDA_CAL_LATCH_EN;
+ writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1);
+
+ /* write the calibration, then delay 10 ms as sample in docs */
+ val = readl(tcphy->base + TX_DIG_CTRL_REG_2);
+ val &= ~(TX_RESCAL_CODE_MASK << TX_RESCAL_CODE_OFFSET);
+ val |= calib << TX_RESCAL_CODE_OFFSET;
+ writel(val, tcphy->base + TX_DIG_CTRL_REG_2);
+ usleep_range(10000, 10050);
+
+ /*
+ * Enable signal for latch that sample and holds calibration values.
+ * Activate this signal for 1 clock cycle to sample new calibration
+ * values.
+ */
+ tx_ana_ctrl_reg_1 |= TXDA_CAL_LATCH_EN;
+ writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1);
+ usleep_range(150, 200);
+
+ /* set TX Voltage Level and TX Deemphasis to 0 */
+ writel(0, tcphy->base + PHY_DP_TX_CTL);
+
+ /* re-enable decap */
+ tx_ana_ctrl_reg_2 = XCVR_DECAP_EN;
+ writel(tx_ana_ctrl_reg_2, tcphy->base + TX_ANA_CTRL_REG_2);
+ udelay(1);
+ tx_ana_ctrl_reg_2 |= XCVR_DECAP_EN_DEL;
+ writel(tx_ana_ctrl_reg_2, tcphy->base + TX_ANA_CTRL_REG_2);
+
+ writel(0, tcphy->base + TX_ANA_CTRL_REG_3);
+
+ tx_ana_ctrl_reg_1 |= TXDA_UPHY_SUPPLY_EN;
+ writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1);
+ udelay(1);
+ tx_ana_ctrl_reg_1 |= TXDA_UPHY_SUPPLY_EN_DEL;
+ writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1);
+
+ writel(0, tcphy->base + TX_ANA_CTRL_REG_5);
+
+ /*
+ * Programs txda_drv_ldo_prog[15:0], Sets driver LDO
+ * voltage 16'h1001 for DP-AUX-TX and RX
+ */
+ writel(0x1001, tcphy->base + TX_ANA_CTRL_REG_4);
+
+ /* re-enables Bandgap reference for LDO */
+ tx_ana_ctrl_reg_1 |= TXDA_DRV_LDO_EN;
+ writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1);
+ udelay(5);
+ tx_ana_ctrl_reg_1 |= TXDA_BGREF_EN;
+ writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1);
+
+ /*
+ * re-enables the transmitter pre-driver, driver data selection MUX,
+ * and receiver detect circuits.
+ */
+ tx_ana_ctrl_reg_2 |= TXDA_DRV_PREDRV_EN;
+ writel(tx_ana_ctrl_reg_2, tcphy->base + TX_ANA_CTRL_REG_2);
+ udelay(1);
+ tx_ana_ctrl_reg_2 |= TXDA_DRV_PREDRV_EN_DEL;
+ writel(tx_ana_ctrl_reg_2, tcphy->base + TX_ANA_CTRL_REG_2);
+
+ /*
+ * Do all the undocumented magic:
+ * - Turn on TXDA_DP_AUX_EN, whatever that is, even though sample
+ * never shows this going on.
+ * - Turn on TXDA_DECAP_EN (and TXDA_DECAP_EN_DEL) even though
+ * docs say for aux it's always 0.
+ * - Turn off the LDO and BGREF, which we just spent time turning
+ * on above (???).
+ *
+ * Without this magic, things seem worse.
+ */
+ tx_ana_ctrl_reg_1 |= TXDA_DP_AUX_EN;
+ tx_ana_ctrl_reg_1 |= TXDA_DECAP_EN;
+ tx_ana_ctrl_reg_1 &= ~TXDA_DRV_LDO_EN;
+ tx_ana_ctrl_reg_1 &= ~TXDA_BGREF_EN;
+ writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1);
+ udelay(1);
+ tx_ana_ctrl_reg_1 |= TXDA_DECAP_EN_DEL;
+ writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1);
+
+ /*
+ * Undo the work we did to set the LDO voltage.
+ * This doesn't seem to help nor hurt, but it kinda goes with the
+ * undocumented magic above.
+ */
+ writel(0, tcphy->base + TX_ANA_CTRL_REG_4);
+
+ /* Don't set voltage swing to 400 mV peak to peak (differential) */
+ writel(0, tcphy->base + TXDA_COEFF_CALC_CTRL);
+
+ /* Init TXDA_CYA_AUXDA_CYA for unknown magic reasons */
+ writel(0, tcphy->base + TXDA_CYA_AUXDA_CYA);
+
+ /*
+ * More undocumented magic, presumably the goal of which is to
+ * make the "auxda_source_aux_oen" be ignored and instead to decide
+ * about "high impedance state" based on what software puts in the
+ * register TXDA_COEFF_CALC_CTRL (see TX_HIGH_Z). Since we only
+ * program that register once and we don't set the bit TX_HIGH_Z,
+ * presumably the goal here is that we should never put the analog
+ * driver in high impedance state.
+ */
+ val = readl(tcphy->base + TX_DIG_CTRL_REG_2);
+ val |= TX_HIGH_Z_TM_EN;
+ writel(val, tcphy->base + TX_DIG_CTRL_REG_2);
+}
+
+static int tcphy_phy_init(struct rockchip_typec_phy *tcphy, u8 mode)
+{
+ const struct rockchip_usb3phy_port_cfg *cfg = tcphy->port_cfgs;
+ int ret, i;
+ u32 val;
+
+ ret = clk_prepare_enable(tcphy->clk_core);
+ if (ret) {
+ dev_err(tcphy->dev, "Failed to prepare_enable core clock\n");
+ return ret;
+ }
+
+ ret = clk_prepare_enable(tcphy->clk_ref);
+ if (ret) {
+ dev_err(tcphy->dev, "Failed to prepare_enable ref clock\n");
+ goto err_clk_core;
+ }
+
+ reset_control_deassert(tcphy->tcphy_rst);
+
+ property_enable(tcphy, &cfg->typec_conn_dir, tcphy->flip);
+ tcphy_dp_aux_set_flip(tcphy);
+
+ tcphy_cfg_24m(tcphy);
+
+ if (mode == MODE_DFP_DP) {
+ tcphy_cfg_dp_pll(tcphy);
+ for (i = 0; i < 4; i++)
+ tcphy_dp_cfg_lane(tcphy, i);
+
+ writel(PIN_ASSIGN_C_E, tcphy->base + PMA_LANE_CFG);
+ } else {
+ tcphy_cfg_usb3_pll(tcphy);
+ tcphy_cfg_dp_pll(tcphy);
+ if (tcphy->flip) {
+ tcphy_tx_usb3_cfg_lane(tcphy, 3);
+ tcphy_rx_usb3_cfg_lane(tcphy, 2);
+ tcphy_dp_cfg_lane(tcphy, 0);
+ tcphy_dp_cfg_lane(tcphy, 1);
+ } else {
+ tcphy_tx_usb3_cfg_lane(tcphy, 0);
+ tcphy_rx_usb3_cfg_lane(tcphy, 1);
+ tcphy_dp_cfg_lane(tcphy, 2);
+ tcphy_dp_cfg_lane(tcphy, 3);
+ }
+
+ writel(PIN_ASSIGN_D_F, tcphy->base + PMA_LANE_CFG);
+ }
+
+ writel(DP_MODE_ENTER_A2, tcphy->base + DP_MODE_CTL);
+
+ reset_control_deassert(tcphy->uphy_rst);
+
+ ret = readx_poll_timeout(readl, tcphy->base + PMA_CMN_CTRL1,
+ val, val & CMN_READY, 10,
+ PHY_MODE_SET_TIMEOUT);
+ if (ret < 0) {
+ dev_err(tcphy->dev, "wait pma ready timeout\n");
+ ret = -ETIMEDOUT;
+ goto err_wait_pma;
+ }
+
+ reset_control_deassert(tcphy->pipe_rst);
+
+ return 0;
+
+err_wait_pma:
+ reset_control_assert(tcphy->uphy_rst);
+ reset_control_assert(tcphy->tcphy_rst);
+ clk_disable_unprepare(tcphy->clk_ref);
+err_clk_core:
+ clk_disable_unprepare(tcphy->clk_core);
+ return ret;
+}
+
+static void tcphy_phy_deinit(struct rockchip_typec_phy *tcphy)
+{
+ reset_control_assert(tcphy->tcphy_rst);
+ reset_control_assert(tcphy->uphy_rst);
+ reset_control_assert(tcphy->pipe_rst);
+ clk_disable_unprepare(tcphy->clk_core);
+ clk_disable_unprepare(tcphy->clk_ref);
+}
+
+static int tcphy_get_mode(struct rockchip_typec_phy *tcphy)
+{
+ struct extcon_dev *edev = tcphy->extcon;
+ union extcon_property_value property;
+ unsigned int id;
+ u8 mode;
+ int ret, ufp, dp;
+
+ if (!edev)
+ return MODE_DFP_USB;
+
+ ufp = extcon_get_state(edev, EXTCON_USB);
+ dp = extcon_get_state(edev, EXTCON_DISP_DP);
+
+ mode = MODE_DFP_USB;
+ id = EXTCON_USB_HOST;
+
+ if (ufp > 0) {
+ mode = MODE_UFP_USB;
+ id = EXTCON_USB;
+ } else if (dp > 0) {
+ mode = MODE_DFP_DP;
+ id = EXTCON_DISP_DP;
+
+ ret = extcon_get_property(edev, id, EXTCON_PROP_USB_SS,
+ &property);
+ if (ret) {
+ dev_err(tcphy->dev, "get superspeed property failed\n");
+ return ret;
+ }
+
+ if (property.intval)
+ mode |= MODE_DFP_USB;
+ }
+
+ ret = extcon_get_property(edev, id, EXTCON_PROP_USB_TYPEC_POLARITY,
+ &property);
+ if (ret) {
+ dev_err(tcphy->dev, "get polarity property failed\n");
+ return ret;
+ }
+
+ tcphy->flip = property.intval ? 1 : 0;
+
+ return mode;
+}
+
+static int tcphy_cfg_usb3_to_usb2_only(struct rockchip_typec_phy *tcphy,
+ bool value)
+{
+ const struct rockchip_usb3phy_port_cfg *cfg = tcphy->port_cfgs;
+
+ property_enable(tcphy, &cfg->usb3tousb2_en, value);
+ property_enable(tcphy, &cfg->usb3_host_disable, value);
+ property_enable(tcphy, &cfg->usb3_host_port, !value);
+
+ return 0;
+}
+
+static int rockchip_usb3_phy_power_on(struct phy *phy)
+{
+ struct rockchip_typec_phy *tcphy = phy_get_drvdata(phy);
+ const struct rockchip_usb3phy_port_cfg *cfg = tcphy->port_cfgs;
+ const struct usb3phy_reg *reg = &cfg->pipe_status;
+ int timeout, new_mode, ret = 0;
+ u32 val;
+
+ mutex_lock(&tcphy->lock);
+
+ new_mode = tcphy_get_mode(tcphy);
+ if (new_mode < 0) {
+ ret = new_mode;
+ goto unlock_ret;
+ }
+
+ /* DP-only mode; fall back to USB2 */
+ if (!(new_mode & (MODE_DFP_USB | MODE_UFP_USB))) {
+ tcphy_cfg_usb3_to_usb2_only(tcphy, true);
+ goto unlock_ret;
+ }
+
+ if (tcphy->mode == new_mode)
+ goto unlock_ret;
+
+ if (tcphy->mode == MODE_DISCONNECT) {
+ ret = tcphy_phy_init(tcphy, new_mode);
+ if (ret)
+ goto unlock_ret;
+ }
+
+ /* wait TCPHY for pipe ready */
+ for (timeout = 0; timeout < 100; timeout++) {
+ regmap_read(tcphy->grf_regs, reg->offset, &val);
+ if (!(val & BIT(reg->enable_bit))) {
+ tcphy->mode |= new_mode & (MODE_DFP_USB | MODE_UFP_USB);
+
+ /* enable usb3 host */
+ tcphy_cfg_usb3_to_usb2_only(tcphy, false);
+ goto unlock_ret;
+ }
+ usleep_range(10, 20);
+ }
+
+ if (tcphy->mode == MODE_DISCONNECT)
+ tcphy_phy_deinit(tcphy);
+
+ ret = -ETIMEDOUT;
+
+unlock_ret:
+ mutex_unlock(&tcphy->lock);
+ return ret;
+}
+
+static int rockchip_usb3_phy_power_off(struct phy *phy)
+{
+ struct rockchip_typec_phy *tcphy = phy_get_drvdata(phy);
+
+ mutex_lock(&tcphy->lock);
+ tcphy_cfg_usb3_to_usb2_only(tcphy, false);
+
+ if (tcphy->mode == MODE_DISCONNECT)
+ goto unlock;
+
+ tcphy->mode &= ~(MODE_UFP_USB | MODE_DFP_USB);
+ if (tcphy->mode == MODE_DISCONNECT)
+ tcphy_phy_deinit(tcphy);
+
+unlock:
+ mutex_unlock(&tcphy->lock);
+ return 0;
+}
+
+static const struct phy_ops rockchip_usb3_phy_ops = {
+ .power_on = rockchip_usb3_phy_power_on,
+ .power_off = rockchip_usb3_phy_power_off,
+ .owner = THIS_MODULE,
+};
+
+static int rockchip_dp_phy_power_on(struct phy *phy)
+{
+ struct rockchip_typec_phy *tcphy = phy_get_drvdata(phy);
+ const struct rockchip_usb3phy_port_cfg *cfg = tcphy->port_cfgs;
+ int new_mode, ret = 0;
+ u32 val;
+
+ mutex_lock(&tcphy->lock);
+
+ new_mode = tcphy_get_mode(tcphy);
+ if (new_mode < 0) {
+ ret = new_mode;
+ goto unlock_ret;
+ }
+
+ if (!(new_mode & MODE_DFP_DP)) {
+ ret = -ENODEV;
+ goto unlock_ret;
+ }
+
+ if (tcphy->mode == new_mode)
+ goto unlock_ret;
+
+ /*
+ * If the PHY has been power on, but the mode is not DP only mode,
+ * re-init the PHY for setting all of 4 lanes to DP.
+ */
+ if (new_mode == MODE_DFP_DP && tcphy->mode != MODE_DISCONNECT) {
+ tcphy_phy_deinit(tcphy);
+ ret = tcphy_phy_init(tcphy, new_mode);
+ } else if (tcphy->mode == MODE_DISCONNECT) {
+ ret = tcphy_phy_init(tcphy, new_mode);
+ }
+ if (ret)
+ goto unlock_ret;
+
+ property_enable(tcphy, &cfg->uphy_dp_sel, 1);
+
+ ret = readx_poll_timeout(readl, tcphy->base + DP_MODE_CTL,
+ val, val & DP_MODE_A2, 1000,
+ PHY_MODE_SET_TIMEOUT);
+ if (ret < 0) {
+ dev_err(tcphy->dev, "failed to wait TCPHY enter A2\n");
+ goto power_on_finish;
+ }
+
+ tcphy_dp_aux_calibration(tcphy);
+
+ writel(DP_MODE_ENTER_A0, tcphy->base + DP_MODE_CTL);
+
+ ret = readx_poll_timeout(readl, tcphy->base + DP_MODE_CTL,
+ val, val & DP_MODE_A0, 1000,
+ PHY_MODE_SET_TIMEOUT);
+ if (ret < 0) {
+ writel(DP_MODE_ENTER_A2, tcphy->base + DP_MODE_CTL);
+ dev_err(tcphy->dev, "failed to wait TCPHY enter A0\n");
+ goto power_on_finish;
+ }
+
+ tcphy->mode |= MODE_DFP_DP;
+
+power_on_finish:
+ if (tcphy->mode == MODE_DISCONNECT)
+ tcphy_phy_deinit(tcphy);
+unlock_ret:
+ mutex_unlock(&tcphy->lock);
+ return ret;
+}
+
+static int rockchip_dp_phy_power_off(struct phy *phy)
+{
+ struct rockchip_typec_phy *tcphy = phy_get_drvdata(phy);
+
+ mutex_lock(&tcphy->lock);
+
+ if (tcphy->mode == MODE_DISCONNECT)
+ goto unlock;
+
+ tcphy->mode &= ~MODE_DFP_DP;
+
+ writel(DP_MODE_ENTER_A2, tcphy->base + DP_MODE_CTL);
+
+ if (tcphy->mode == MODE_DISCONNECT)
+ tcphy_phy_deinit(tcphy);
+
+unlock:
+ mutex_unlock(&tcphy->lock);
+ return 0;
+}
+
+static const struct phy_ops rockchip_dp_phy_ops = {
+ .power_on = rockchip_dp_phy_power_on,
+ .power_off = rockchip_dp_phy_power_off,
+ .owner = THIS_MODULE,
+};
+
+static int tcphy_parse_dt(struct rockchip_typec_phy *tcphy,
+ struct device *dev)
+{
+ tcphy->grf_regs = syscon_regmap_lookup_by_phandle(dev->of_node,
+ "rockchip,grf");
+ if (IS_ERR(tcphy->grf_regs)) {
+ dev_err(dev, "could not find grf dt node\n");
+ return PTR_ERR(tcphy->grf_regs);
+ }
+
+ tcphy->clk_core = devm_clk_get(dev, "tcpdcore");
+ if (IS_ERR(tcphy->clk_core)) {
+ dev_err(dev, "could not get uphy core clock\n");
+ return PTR_ERR(tcphy->clk_core);
+ }
+
+ tcphy->clk_ref = devm_clk_get(dev, "tcpdphy-ref");
+ if (IS_ERR(tcphy->clk_ref)) {
+ dev_err(dev, "could not get uphy ref clock\n");
+ return PTR_ERR(tcphy->clk_ref);
+ }
+
+ tcphy->uphy_rst = devm_reset_control_get(dev, "uphy");
+ if (IS_ERR(tcphy->uphy_rst)) {
+ dev_err(dev, "no uphy_rst reset control found\n");
+ return PTR_ERR(tcphy->uphy_rst);
+ }
+
+ tcphy->pipe_rst = devm_reset_control_get(dev, "uphy-pipe");
+ if (IS_ERR(tcphy->pipe_rst)) {
+ dev_err(dev, "no pipe_rst reset control found\n");
+ return PTR_ERR(tcphy->pipe_rst);
+ }
+
+ tcphy->tcphy_rst = devm_reset_control_get(dev, "uphy-tcphy");
+ if (IS_ERR(tcphy->tcphy_rst)) {
+ dev_err(dev, "no tcphy_rst reset control found\n");
+ return PTR_ERR(tcphy->tcphy_rst);
+ }
+
+ return 0;
+}
+
+static void typec_phy_pre_init(struct rockchip_typec_phy *tcphy)
+{
+ const struct rockchip_usb3phy_port_cfg *cfg = tcphy->port_cfgs;
+
+ reset_control_assert(tcphy->tcphy_rst);
+ reset_control_assert(tcphy->uphy_rst);
+ reset_control_assert(tcphy->pipe_rst);
+
+ /* select external psm clock */
+ property_enable(tcphy, &cfg->external_psm, 1);
+ property_enable(tcphy, &cfg->usb3tousb2_en, 0);
+
+ tcphy->mode = MODE_DISCONNECT;
+}
+
+static int rockchip_typec_phy_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ struct device_node *child_np;
+ struct rockchip_typec_phy *tcphy;
+ struct phy_provider *phy_provider;
+ struct resource *res;
+ const struct rockchip_usb3phy_port_cfg *phy_cfgs;
+ int index, ret;
+
+ tcphy = devm_kzalloc(dev, sizeof(*tcphy), GFP_KERNEL);
+ if (!tcphy)
+ return -ENOMEM;
+
+ phy_cfgs = of_device_get_match_data(dev);
+ if (!phy_cfgs) {
+ dev_err(dev, "phy configs are not assigned!\n");
+ return -EINVAL;
+ }
+
+ tcphy->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
+ if (IS_ERR(tcphy->base))
+ return PTR_ERR(tcphy->base);
+
+ /* find out a proper config which can be matched with dt. */
+ index = 0;
+ while (phy_cfgs[index].reg) {
+ if (phy_cfgs[index].reg == res->start) {
+ tcphy->port_cfgs = &phy_cfgs[index];
+ break;
+ }
+
+ ++index;
+ }
+
+ if (!tcphy->port_cfgs) {
+ dev_err(dev, "no phy-config can be matched with %pOFn node\n",
+ np);
+ return -EINVAL;
+ }
+
+ ret = tcphy_parse_dt(tcphy, dev);
+ if (ret)
+ return ret;
+
+ tcphy->dev = dev;
+ platform_set_drvdata(pdev, tcphy);
+ mutex_init(&tcphy->lock);
+
+ typec_phy_pre_init(tcphy);
+
+ tcphy->extcon = extcon_get_edev_by_phandle(dev, 0);
+ if (IS_ERR(tcphy->extcon)) {
+ if (PTR_ERR(tcphy->extcon) == -ENODEV) {
+ tcphy->extcon = NULL;
+ } else {
+ if (PTR_ERR(tcphy->extcon) != -EPROBE_DEFER)
+ dev_err(dev, "Invalid or missing extcon\n");
+ return PTR_ERR(tcphy->extcon);
+ }
+ }
+
+ pm_runtime_enable(dev);
+
+ for_each_available_child_of_node(np, child_np) {
+ struct phy *phy;
+
+ if (of_node_name_eq(child_np, "dp-port"))
+ phy = devm_phy_create(dev, child_np,
+ &rockchip_dp_phy_ops);
+ else if (of_node_name_eq(child_np, "usb3-port"))
+ phy = devm_phy_create(dev, child_np,
+ &rockchip_usb3_phy_ops);
+ else
+ continue;
+
+ if (IS_ERR(phy)) {
+ dev_err(dev, "failed to create phy: %pOFn\n",
+ child_np);
+ pm_runtime_disable(dev);
+ of_node_put(child_np);
+ return PTR_ERR(phy);
+ }
+
+ phy_set_drvdata(phy, tcphy);
+ }
+
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+ if (IS_ERR(phy_provider)) {
+ dev_err(dev, "Failed to register phy provider\n");
+ pm_runtime_disable(dev);
+ return PTR_ERR(phy_provider);
+ }
+
+ return 0;
+}
+
+static void rockchip_typec_phy_remove(struct platform_device *pdev)
+{
+ pm_runtime_disable(&pdev->dev);
+}
+
+static const struct of_device_id rockchip_typec_phy_dt_ids[] = {
+ {
+ .compatible = "rockchip,rk3399-typec-phy",
+ .data = &rk3399_usb3phy_port_cfgs
+ },
+ { /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, rockchip_typec_phy_dt_ids);
+
+static struct platform_driver rockchip_typec_phy_driver = {
+ .probe = rockchip_typec_phy_probe,
+ .remove_new = rockchip_typec_phy_remove,
+ .driver = {
+ .name = "rockchip-typec-phy",
+ .of_match_table = rockchip_typec_phy_dt_ids,
+ },
+};
+
+module_platform_driver(rockchip_typec_phy_driver);
+
+MODULE_AUTHOR("Chris Zhong <zyw@rock-chips.com>");
+MODULE_AUTHOR("Kever Yang <kever.yang@rock-chips.com>");
+MODULE_DESCRIPTION("Rockchip USB TYPE-C PHY driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/rockchip/phy-rockchip-usb.c b/drivers/phy/rockchip/phy-rockchip-usb.c
new file mode 100644
index 0000000000..8454285977
--- /dev/null
+++ b/drivers/phy/rockchip/phy-rockchip-usb.c
@@ -0,0 +1,581 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Rockchip usb PHY driver
+ *
+ * Copyright (C) 2014 Yunzhi Li <lyz@rock-chips.com>
+ * Copyright (C) 2014 ROCKCHIP, Inc.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/reset.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+#include <linux/delay.h>
+
+static int enable_usb_uart;
+
+#define HIWORD_UPDATE(val, mask) \
+ ((val) | (mask) << 16)
+
+#define UOC_CON0 0x00
+#define UOC_CON0_SIDDQ BIT(13)
+#define UOC_CON0_DISABLE BIT(4)
+#define UOC_CON0_COMMON_ON_N BIT(0)
+
+#define UOC_CON2 0x08
+#define UOC_CON2_SOFT_CON_SEL BIT(2)
+
+#define UOC_CON3 0x0c
+/* bits present on rk3188 and rk3288 phys */
+#define UOC_CON3_UTMI_TERMSEL_FULLSPEED BIT(5)
+#define UOC_CON3_UTMI_XCVRSEELCT_FSTRANSC (1 << 3)
+#define UOC_CON3_UTMI_XCVRSEELCT_MASK (3 << 3)
+#define UOC_CON3_UTMI_OPMODE_NODRIVING (1 << 1)
+#define UOC_CON3_UTMI_OPMODE_MASK (3 << 1)
+#define UOC_CON3_UTMI_SUSPENDN BIT(0)
+
+struct rockchip_usb_phys {
+ int reg;
+ const char *pll_name;
+};
+
+struct rockchip_usb_phy_base;
+struct rockchip_usb_phy_pdata {
+ struct rockchip_usb_phys *phys;
+ int (*init_usb_uart)(struct regmap *grf,
+ const struct rockchip_usb_phy_pdata *pdata);
+ int usb_uart_phy;
+};
+
+struct rockchip_usb_phy_base {
+ struct device *dev;
+ struct regmap *reg_base;
+ const struct rockchip_usb_phy_pdata *pdata;
+};
+
+struct rockchip_usb_phy {
+ struct rockchip_usb_phy_base *base;
+ struct device_node *np;
+ unsigned int reg_offset;
+ struct clk *clk;
+ struct clk *clk480m;
+ struct clk_hw clk480m_hw;
+ struct phy *phy;
+ bool uart_enabled;
+ struct reset_control *reset;
+ struct regulator *vbus;
+};
+
+static int rockchip_usb_phy_power(struct rockchip_usb_phy *phy,
+ bool siddq)
+{
+ u32 val = HIWORD_UPDATE(siddq ? UOC_CON0_SIDDQ : 0, UOC_CON0_SIDDQ);
+
+ return regmap_write(phy->base->reg_base, phy->reg_offset, val);
+}
+
+static unsigned long rockchip_usb_phy480m_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ return 480000000;
+}
+
+static void rockchip_usb_phy480m_disable(struct clk_hw *hw)
+{
+ struct rockchip_usb_phy *phy = container_of(hw,
+ struct rockchip_usb_phy,
+ clk480m_hw);
+
+ if (phy->vbus)
+ regulator_disable(phy->vbus);
+
+ /* Power down usb phy analog blocks by set siddq 1 */
+ rockchip_usb_phy_power(phy, 1);
+}
+
+static int rockchip_usb_phy480m_enable(struct clk_hw *hw)
+{
+ struct rockchip_usb_phy *phy = container_of(hw,
+ struct rockchip_usb_phy,
+ clk480m_hw);
+
+ /* Power up usb phy analog blocks by set siddq 0 */
+ return rockchip_usb_phy_power(phy, 0);
+}
+
+static int rockchip_usb_phy480m_is_enabled(struct clk_hw *hw)
+{
+ struct rockchip_usb_phy *phy = container_of(hw,
+ struct rockchip_usb_phy,
+ clk480m_hw);
+ int ret;
+ u32 val;
+
+ ret = regmap_read(phy->base->reg_base, phy->reg_offset, &val);
+ if (ret < 0)
+ return ret;
+
+ return (val & UOC_CON0_SIDDQ) ? 0 : 1;
+}
+
+static const struct clk_ops rockchip_usb_phy480m_ops = {
+ .enable = rockchip_usb_phy480m_enable,
+ .disable = rockchip_usb_phy480m_disable,
+ .is_enabled = rockchip_usb_phy480m_is_enabled,
+ .recalc_rate = rockchip_usb_phy480m_recalc_rate,
+};
+
+static int rockchip_usb_phy_power_off(struct phy *_phy)
+{
+ struct rockchip_usb_phy *phy = phy_get_drvdata(_phy);
+
+ if (phy->uart_enabled)
+ return -EBUSY;
+
+ clk_disable_unprepare(phy->clk480m);
+
+ return 0;
+}
+
+static int rockchip_usb_phy_power_on(struct phy *_phy)
+{
+ struct rockchip_usb_phy *phy = phy_get_drvdata(_phy);
+
+ if (phy->uart_enabled)
+ return -EBUSY;
+
+ if (phy->vbus) {
+ int ret;
+
+ ret = regulator_enable(phy->vbus);
+ if (ret)
+ return ret;
+ }
+
+ return clk_prepare_enable(phy->clk480m);
+}
+
+static int rockchip_usb_phy_reset(struct phy *_phy)
+{
+ struct rockchip_usb_phy *phy = phy_get_drvdata(_phy);
+
+ if (phy->reset) {
+ reset_control_assert(phy->reset);
+ udelay(10);
+ reset_control_deassert(phy->reset);
+ }
+
+ return 0;
+}
+
+static const struct phy_ops ops = {
+ .power_on = rockchip_usb_phy_power_on,
+ .power_off = rockchip_usb_phy_power_off,
+ .reset = rockchip_usb_phy_reset,
+ .owner = THIS_MODULE,
+};
+
+static void rockchip_usb_phy_action(void *data)
+{
+ struct rockchip_usb_phy *rk_phy = data;
+
+ if (!rk_phy->uart_enabled) {
+ of_clk_del_provider(rk_phy->np);
+ clk_unregister(rk_phy->clk480m);
+ }
+
+ if (rk_phy->clk)
+ clk_put(rk_phy->clk);
+}
+
+static int rockchip_usb_phy_init(struct rockchip_usb_phy_base *base,
+ struct device_node *child)
+{
+ struct rockchip_usb_phy *rk_phy;
+ unsigned int reg_offset;
+ const char *clk_name;
+ struct clk_init_data init;
+ int err, i;
+
+ rk_phy = devm_kzalloc(base->dev, sizeof(*rk_phy), GFP_KERNEL);
+ if (!rk_phy)
+ return -ENOMEM;
+
+ rk_phy->base = base;
+ rk_phy->np = child;
+
+ if (of_property_read_u32(child, "reg", &reg_offset)) {
+ dev_err(base->dev, "missing reg property in node %pOFn\n",
+ child);
+ return -EINVAL;
+ }
+
+ rk_phy->reset = of_reset_control_get(child, "phy-reset");
+ if (IS_ERR(rk_phy->reset))
+ rk_phy->reset = NULL;
+
+ rk_phy->reg_offset = reg_offset;
+
+ rk_phy->clk = of_clk_get_by_name(child, "phyclk");
+ if (IS_ERR(rk_phy->clk))
+ rk_phy->clk = NULL;
+
+ i = 0;
+ init.name = NULL;
+ while (base->pdata->phys[i].reg) {
+ if (base->pdata->phys[i].reg == reg_offset) {
+ init.name = base->pdata->phys[i].pll_name;
+ break;
+ }
+ i++;
+ }
+
+ if (!init.name) {
+ dev_err(base->dev, "phy data not found\n");
+ return -EINVAL;
+ }
+
+ if (enable_usb_uart && base->pdata->usb_uart_phy == i) {
+ dev_dbg(base->dev, "phy%d used as uart output\n", i);
+ rk_phy->uart_enabled = true;
+ } else {
+ if (rk_phy->clk) {
+ clk_name = __clk_get_name(rk_phy->clk);
+ init.flags = 0;
+ init.parent_names = &clk_name;
+ init.num_parents = 1;
+ } else {
+ init.flags = 0;
+ init.parent_names = NULL;
+ init.num_parents = 0;
+ }
+
+ init.ops = &rockchip_usb_phy480m_ops;
+ rk_phy->clk480m_hw.init = &init;
+
+ rk_phy->clk480m = clk_register(base->dev, &rk_phy->clk480m_hw);
+ if (IS_ERR(rk_phy->clk480m)) {
+ err = PTR_ERR(rk_phy->clk480m);
+ goto err_clk;
+ }
+
+ err = of_clk_add_provider(child, of_clk_src_simple_get,
+ rk_phy->clk480m);
+ if (err < 0)
+ goto err_clk_prov;
+ }
+
+ err = devm_add_action_or_reset(base->dev, rockchip_usb_phy_action,
+ rk_phy);
+ if (err)
+ return err;
+
+ rk_phy->phy = devm_phy_create(base->dev, child, &ops);
+ if (IS_ERR(rk_phy->phy)) {
+ dev_err(base->dev, "failed to create PHY\n");
+ return PTR_ERR(rk_phy->phy);
+ }
+ phy_set_drvdata(rk_phy->phy, rk_phy);
+
+ rk_phy->vbus = devm_regulator_get_optional(&rk_phy->phy->dev, "vbus");
+ if (IS_ERR(rk_phy->vbus)) {
+ if (PTR_ERR(rk_phy->vbus) == -EPROBE_DEFER)
+ return PTR_ERR(rk_phy->vbus);
+ rk_phy->vbus = NULL;
+ }
+
+ /*
+ * When acting as uart-pipe, just keep clock on otherwise
+ * only power up usb phy when it use, so disable it when init
+ */
+ if (rk_phy->uart_enabled)
+ return clk_prepare_enable(rk_phy->clk);
+ else
+ return rockchip_usb_phy_power(rk_phy, 1);
+
+err_clk_prov:
+ if (!rk_phy->uart_enabled)
+ clk_unregister(rk_phy->clk480m);
+err_clk:
+ if (rk_phy->clk)
+ clk_put(rk_phy->clk);
+ return err;
+}
+
+static const struct rockchip_usb_phy_pdata rk3066a_pdata = {
+ .phys = (struct rockchip_usb_phys[]){
+ { .reg = 0x17c, .pll_name = "sclk_otgphy0_480m" },
+ { .reg = 0x188, .pll_name = "sclk_otgphy1_480m" },
+ { /* sentinel */ }
+ },
+};
+
+static int __init rockchip_init_usb_uart_common(struct regmap *grf,
+ const struct rockchip_usb_phy_pdata *pdata)
+{
+ int regoffs = pdata->phys[pdata->usb_uart_phy].reg;
+ int ret;
+ u32 val;
+
+ /*
+ * COMMON_ON and DISABLE settings are described in the TRM,
+ * but were not present in the original code.
+ * Also disable the analog phy components to save power.
+ */
+ val = HIWORD_UPDATE(UOC_CON0_COMMON_ON_N
+ | UOC_CON0_DISABLE
+ | UOC_CON0_SIDDQ,
+ UOC_CON0_COMMON_ON_N
+ | UOC_CON0_DISABLE
+ | UOC_CON0_SIDDQ);
+ ret = regmap_write(grf, regoffs + UOC_CON0, val);
+ if (ret)
+ return ret;
+
+ val = HIWORD_UPDATE(UOC_CON2_SOFT_CON_SEL,
+ UOC_CON2_SOFT_CON_SEL);
+ ret = regmap_write(grf, regoffs + UOC_CON2, val);
+ if (ret)
+ return ret;
+
+ val = HIWORD_UPDATE(UOC_CON3_UTMI_OPMODE_NODRIVING
+ | UOC_CON3_UTMI_XCVRSEELCT_FSTRANSC
+ | UOC_CON3_UTMI_TERMSEL_FULLSPEED,
+ UOC_CON3_UTMI_SUSPENDN
+ | UOC_CON3_UTMI_OPMODE_MASK
+ | UOC_CON3_UTMI_XCVRSEELCT_MASK
+ | UOC_CON3_UTMI_TERMSEL_FULLSPEED);
+ ret = regmap_write(grf, UOC_CON3, val);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+#define RK3188_UOC0_CON0 0x10c
+#define RK3188_UOC0_CON0_BYPASSSEL BIT(9)
+#define RK3188_UOC0_CON0_BYPASSDMEN BIT(8)
+
+/*
+ * Enable the bypass of uart2 data through the otg usb phy.
+ * See description of rk3288-variant for details.
+ */
+static int __init rk3188_init_usb_uart(struct regmap *grf,
+ const struct rockchip_usb_phy_pdata *pdata)
+{
+ u32 val;
+ int ret;
+
+ ret = rockchip_init_usb_uart_common(grf, pdata);
+ if (ret)
+ return ret;
+
+ val = HIWORD_UPDATE(RK3188_UOC0_CON0_BYPASSSEL
+ | RK3188_UOC0_CON0_BYPASSDMEN,
+ RK3188_UOC0_CON0_BYPASSSEL
+ | RK3188_UOC0_CON0_BYPASSDMEN);
+ ret = regmap_write(grf, RK3188_UOC0_CON0, val);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static const struct rockchip_usb_phy_pdata rk3188_pdata = {
+ .phys = (struct rockchip_usb_phys[]){
+ { .reg = 0x10c, .pll_name = "sclk_otgphy0_480m" },
+ { .reg = 0x11c, .pll_name = "sclk_otgphy1_480m" },
+ { /* sentinel */ }
+ },
+ .init_usb_uart = rk3188_init_usb_uart,
+ .usb_uart_phy = 0,
+};
+
+#define RK3288_UOC0_CON3 0x32c
+#define RK3288_UOC0_CON3_BYPASSDMEN BIT(6)
+#define RK3288_UOC0_CON3_BYPASSSEL BIT(7)
+
+/*
+ * Enable the bypass of uart2 data through the otg usb phy.
+ * Original description in the TRM.
+ * 1. Disable the OTG block by setting OTGDISABLE0 to 1’b1.
+ * 2. Disable the pull-up resistance on the D+ line by setting
+ * OPMODE0[1:0] to 2’b01.
+ * 3. To ensure that the XO, Bias, and PLL blocks are powered down in Suspend
+ * mode, set COMMONONN to 1’b1.
+ * 4. Place the USB PHY in Suspend mode by setting SUSPENDM0 to 1’b0.
+ * 5. Set BYPASSSEL0 to 1’b1.
+ * 6. To transmit data, controls BYPASSDMEN0, and BYPASSDMDATA0.
+ * To receive data, monitor FSVPLUS0.
+ *
+ * The actual code in the vendor kernel does some things differently.
+ */
+static int __init rk3288_init_usb_uart(struct regmap *grf,
+ const struct rockchip_usb_phy_pdata *pdata)
+{
+ u32 val;
+ int ret;
+
+ ret = rockchip_init_usb_uart_common(grf, pdata);
+ if (ret)
+ return ret;
+
+ val = HIWORD_UPDATE(RK3288_UOC0_CON3_BYPASSSEL
+ | RK3288_UOC0_CON3_BYPASSDMEN,
+ RK3288_UOC0_CON3_BYPASSSEL
+ | RK3288_UOC0_CON3_BYPASSDMEN);
+ ret = regmap_write(grf, RK3288_UOC0_CON3, val);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static const struct rockchip_usb_phy_pdata rk3288_pdata = {
+ .phys = (struct rockchip_usb_phys[]){
+ { .reg = 0x320, .pll_name = "sclk_otgphy0_480m" },
+ { .reg = 0x334, .pll_name = "sclk_otgphy1_480m" },
+ { .reg = 0x348, .pll_name = "sclk_otgphy2_480m" },
+ { /* sentinel */ }
+ },
+ .init_usb_uart = rk3288_init_usb_uart,
+ .usb_uart_phy = 0,
+};
+
+static int rockchip_usb_phy_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct rockchip_usb_phy_base *phy_base;
+ struct phy_provider *phy_provider;
+ const struct of_device_id *match;
+ struct device_node *child;
+ int err;
+
+ phy_base = devm_kzalloc(dev, sizeof(*phy_base), GFP_KERNEL);
+ if (!phy_base)
+ return -ENOMEM;
+
+ match = of_match_device(dev->driver->of_match_table, dev);
+ if (!match || !match->data) {
+ dev_err(dev, "missing phy data\n");
+ return -EINVAL;
+ }
+
+ phy_base->pdata = match->data;
+
+ phy_base->dev = dev;
+ phy_base->reg_base = ERR_PTR(-ENODEV);
+ if (dev->parent && dev->parent->of_node)
+ phy_base->reg_base = syscon_node_to_regmap(
+ dev->parent->of_node);
+ if (IS_ERR(phy_base->reg_base))
+ phy_base->reg_base = syscon_regmap_lookup_by_phandle(
+ dev->of_node, "rockchip,grf");
+ if (IS_ERR(phy_base->reg_base)) {
+ dev_err(&pdev->dev, "Missing rockchip,grf property\n");
+ return PTR_ERR(phy_base->reg_base);
+ }
+
+ for_each_available_child_of_node(dev->of_node, child) {
+ err = rockchip_usb_phy_init(phy_base, child);
+ if (err) {
+ of_node_put(child);
+ return err;
+ }
+ }
+
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+ return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id rockchip_usb_phy_dt_ids[] = {
+ { .compatible = "rockchip,rk3066a-usb-phy", .data = &rk3066a_pdata },
+ { .compatible = "rockchip,rk3188-usb-phy", .data = &rk3188_pdata },
+ { .compatible = "rockchip,rk3288-usb-phy", .data = &rk3288_pdata },
+ {}
+};
+
+MODULE_DEVICE_TABLE(of, rockchip_usb_phy_dt_ids);
+
+static struct platform_driver rockchip_usb_driver = {
+ .probe = rockchip_usb_phy_probe,
+ .driver = {
+ .name = "rockchip-usb-phy",
+ .of_match_table = rockchip_usb_phy_dt_ids,
+ },
+};
+
+module_platform_driver(rockchip_usb_driver);
+
+#ifndef MODULE
+static int __init rockchip_init_usb_uart(void)
+{
+ const struct of_device_id *match;
+ const struct rockchip_usb_phy_pdata *data;
+ struct device_node *np;
+ struct regmap *grf;
+ int ret;
+
+ if (!enable_usb_uart)
+ return 0;
+
+ np = of_find_matching_node_and_match(NULL, rockchip_usb_phy_dt_ids,
+ &match);
+ if (!np) {
+ pr_err("%s: failed to find usbphy node\n", __func__);
+ return -ENOTSUPP;
+ }
+
+ pr_debug("%s: using settings for %s\n", __func__, match->compatible);
+ data = match->data;
+
+ if (!data->init_usb_uart) {
+ pr_err("%s: usb-uart not available on %s\n",
+ __func__, match->compatible);
+ return -ENOTSUPP;
+ }
+
+ grf = ERR_PTR(-ENODEV);
+ if (np->parent)
+ grf = syscon_node_to_regmap(np->parent);
+ if (IS_ERR(grf))
+ grf = syscon_regmap_lookup_by_phandle(np, "rockchip,grf");
+ if (IS_ERR(grf)) {
+ pr_err("%s: Missing rockchip,grf property, %lu\n",
+ __func__, PTR_ERR(grf));
+ return PTR_ERR(grf);
+ }
+
+ ret = data->init_usb_uart(grf, data);
+ if (ret) {
+ pr_err("%s: could not init usb_uart, %d\n", __func__, ret);
+ enable_usb_uart = 0;
+ return ret;
+ }
+
+ return 0;
+}
+early_initcall(rockchip_init_usb_uart);
+
+static int __init rockchip_usb_uart(char *buf)
+{
+ enable_usb_uart = true;
+ return 0;
+}
+early_param("rockchip.usb_uart", rockchip_usb_uart);
+#endif
+
+MODULE_AUTHOR("Yunzhi Li <lyz@rock-chips.com>");
+MODULE_DESCRIPTION("Rockchip USB 2.0 PHY driver");
+MODULE_LICENSE("GPL v2");
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-25 18:32:55 +0000