diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/pinctrl/intel/pinctrl-intel.h | 281 |
1 files changed, 281 insertions, 0 deletions
diff --git a/drivers/pinctrl/intel/pinctrl-intel.h b/drivers/pinctrl/intel/pinctrl-intel.h new file mode 100644 index 0000000000..cee512f97b --- /dev/null +++ b/drivers/pinctrl/intel/pinctrl-intel.h @@ -0,0 +1,281 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Core pinctrl/GPIO driver for Intel GPIO controllers + * + * Copyright (C) 2015, Intel Corporation + * Authors: Mathias Nyman <mathias.nyman@linux.intel.com> + * Mika Westerberg <mika.westerberg@linux.intel.com> + */ + +#ifndef PINCTRL_INTEL_H +#define PINCTRL_INTEL_H + +#include <linux/bits.h> +#include <linux/compiler_types.h> +#include <linux/gpio/driver.h> +#include <linux/irq.h> +#include <linux/kernel.h> +#include <linux/pm.h> +#include <linux/pinctrl/pinctrl.h> +#include <linux/spinlock_types.h> + +struct platform_device; +struct device; + +/** + * struct intel_pingroup - Description about group of pins + * @grp: Generic data of the pin group (name and pins) + * @mode: Native mode in which the group is muxed out @pins. Used if @modes is %NULL. + * @modes: If not %NULL this will hold mode for each pin in @pins + */ +struct intel_pingroup { + struct pingroup grp; + unsigned short mode; + const unsigned int *modes; +}; + +/** + * struct intel_function - Description about a function + * @func: Generic data of the pin function (name and groups of pins) + */ +struct intel_function { + struct pinfunction func; +}; + +#define INTEL_PINCTRL_MAX_GPP_SIZE 32 + +/** + * struct intel_padgroup - Hardware pad group information + * @reg_num: GPI_IS register number + * @base: Starting pin of this group + * @size: Size of this group (maximum is %INTEL_PINCTRL_MAX_GPP_SIZE). + * @gpio_base: Starting GPIO base of this group + * @padown_num: PAD_OWN register number (assigned by the core driver) + * + * If pad groups of a community are not the same size, use this structure + * to specify them. + */ +struct intel_padgroup { + unsigned int reg_num; + unsigned int base; + unsigned int size; + int gpio_base; + unsigned int padown_num; +}; + +/** + * enum - Special treatment for GPIO base in pad group + * + * @INTEL_GPIO_BASE_ZERO: force GPIO base to be 0 + * @INTEL_GPIO_BASE_NOMAP: no GPIO mapping should be created + * @INTEL_GPIO_BASE_MATCH: matches with starting pin number + */ +enum { + INTEL_GPIO_BASE_ZERO = -2, + INTEL_GPIO_BASE_NOMAP = -1, + INTEL_GPIO_BASE_MATCH = 0, +}; + +/** + * struct intel_community - Intel pin community description + * @barno: MMIO BAR number where registers for this community reside + * @padown_offset: Register offset of PAD_OWN register from @regs. If %0 + * then there is no support for owner. + * @padcfglock_offset: Register offset of PADCFGLOCK from @regs. If %0 then + * locking is not supported. + * @hostown_offset: Register offset of HOSTSW_OWN from @regs. If %0 then it + * is assumed that the host owns the pin (rather than + * ACPI). + * @is_offset: Register offset of GPI_IS from @regs. + * @ie_offset: Register offset of GPI_IE from @regs. + * @features: Additional features supported by the hardware + * @pin_base: Starting pin of pins in this community + * @npins: Number of pins in this community + * @gpp_size: Maximum number of pads in each group, such as PADCFGLOCK, + * HOSTSW_OWN, GPI_IS, GPI_IE. Used when @gpps is %NULL. + * @gpp_num_padown_regs: Number of pad registers each pad group consumes at + * minimum. Used when @gpps is %NULL. + * @gpps: Pad groups if the controller has variable size pad groups + * @ngpps: Number of pad groups in this community + * @pad_map: Optional non-linear mapping of the pads + * @nirqs: Optional total number of IRQs this community can generate + * @acpi_space_id: Optional address space ID for ACPI OpRegion handler + * @regs: Community specific common registers (reserved for core driver) + * @pad_regs: Community specific pad registers (reserved for core driver) + * + * In older Intel GPIO host controllers, this driver supports, each pad group + * is of equal size (except the last one). In that case the driver can just + * fill in @gpp_size and @gpp_num_padown_regs fields and let the core driver + * to handle the rest. + * + * In newer Intel GPIO host controllers each pad group is of variable size, + * so the client driver can pass custom @gpps and @ngpps instead. + */ +struct intel_community { + unsigned int barno; + unsigned int padown_offset; + unsigned int padcfglock_offset; + unsigned int hostown_offset; + unsigned int is_offset; + unsigned int ie_offset; + unsigned int features; + unsigned int pin_base; + size_t npins; + unsigned int gpp_size; + unsigned int gpp_num_padown_regs; + const struct intel_padgroup *gpps; + size_t ngpps; + const unsigned int *pad_map; + unsigned short nirqs; + unsigned short acpi_space_id; + + /* Reserved for the core driver */ + void __iomem *regs; + void __iomem *pad_regs; +}; + +/* Additional features supported by the hardware */ +#define PINCTRL_FEATURE_DEBOUNCE BIT(0) +#define PINCTRL_FEATURE_1K_PD BIT(1) +#define PINCTRL_FEATURE_GPIO_HW_INFO BIT(2) +#define PINCTRL_FEATURE_PWM BIT(3) +#define PINCTRL_FEATURE_BLINK BIT(4) +#define PINCTRL_FEATURE_EXP BIT(5) + +#define __INTEL_COMMUNITY(b, s, e, g, n, gs, gn, soc) \ + { \ + .barno = (b), \ + .padown_offset = soc ## _PAD_OWN, \ + .padcfglock_offset = soc ## _PADCFGLOCK, \ + .hostown_offset = soc ## _HOSTSW_OWN, \ + .is_offset = soc ## _GPI_IS, \ + .ie_offset = soc ## _GPI_IE, \ + .gpp_size = (gs), \ + .gpp_num_padown_regs = (gn), \ + .pin_base = (s), \ + .npins = ((e) - (s) + 1), \ + .gpps = (g), \ + .ngpps = (n), \ + } + +#define INTEL_COMMUNITY_GPPS(b, s, e, g, soc) \ + __INTEL_COMMUNITY(b, s, e, g, ARRAY_SIZE(g), 0, 0, soc) + +#define INTEL_COMMUNITY_SIZE(b, s, e, gs, gn, soc) \ + __INTEL_COMMUNITY(b, s, e, NULL, 0, gs, gn, soc) + +/** + * PIN_GROUP - Declare a pin group + * @n: Name of the group + * @p: An array of pins this group consists + * @m: Mode which the pins are put when this group is active. Can be either + * a single integer or an array of integers in which case mode is per + * pin. + */ +#define PIN_GROUP(n, p, m) \ + { \ + .grp = PINCTRL_PINGROUP((n), (p), ARRAY_SIZE((p))), \ + .mode = __builtin_choose_expr(__builtin_constant_p((m)), (m), 0), \ + .modes = __builtin_choose_expr(__builtin_constant_p((m)), NULL, (m)), \ + } + +#define FUNCTION(n, g) \ + { \ + .func = PINCTRL_PINFUNCTION((n), (g), ARRAY_SIZE(g)), \ + } + +/** + * struct intel_pinctrl_soc_data - Intel pin controller per-SoC configuration + * @uid: ACPI _UID for the probe driver use if needed + * @pins: Array if pins this pinctrl controls + * @npins: Number of pins in the array + * @groups: Array of pin groups + * @ngroups: Number of groups in the array + * @functions: Array of functions + * @nfunctions: Number of functions in the array + * @communities: Array of communities this pinctrl handles + * @ncommunities: Number of communities in the array + * + * The @communities is used as a template by the core driver. It will make + * copy of all communities and fill in rest of the information. + */ +struct intel_pinctrl_soc_data { + const char *uid; + const struct pinctrl_pin_desc *pins; + size_t npins; + const struct intel_pingroup *groups; + size_t ngroups; + const struct intel_function *functions; + size_t nfunctions; + const struct intel_community *communities; + size_t ncommunities; +}; + +const struct intel_pinctrl_soc_data *intel_pinctrl_get_soc_data(struct platform_device *pdev); + +struct intel_pad_context; +struct intel_community_context; + +/** + * struct intel_pinctrl_context - context to be saved during suspend-resume + * @pads: Opaque context per pad (driver dependent) + * @communities: Opaque context per community (driver dependent) + */ +struct intel_pinctrl_context { + struct intel_pad_context *pads; + struct intel_community_context *communities; +}; + +/** + * struct intel_pinctrl - Intel pinctrl private structure + * @dev: Pointer to the device structure + * @lock: Lock to serialize register access + * @pctldesc: Pin controller description + * @pctldev: Pointer to the pin controller device + * @chip: GPIO chip in this pin controller + * @soc: SoC/PCH specific pin configuration data + * @communities: All communities in this pin controller + * @ncommunities: Number of communities in this pin controller + * @context: Configuration saved over system sleep + * @irq: pinctrl/GPIO chip irq number + */ +struct intel_pinctrl { + struct device *dev; + raw_spinlock_t lock; + struct pinctrl_desc pctldesc; + struct pinctrl_dev *pctldev; + struct gpio_chip chip; + const struct intel_pinctrl_soc_data *soc; + struct intel_community *communities; + size_t ncommunities; + struct intel_pinctrl_context context; + int irq; +}; + +int intel_pinctrl_probe_by_hid(struct platform_device *pdev); +int intel_pinctrl_probe_by_uid(struct platform_device *pdev); + +#ifdef CONFIG_PM_SLEEP +int intel_pinctrl_suspend_noirq(struct device *dev); +int intel_pinctrl_resume_noirq(struct device *dev); +#endif + +#define INTEL_PINCTRL_PM_OPS(_name) \ +const struct dev_pm_ops _name = { \ + SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(intel_pinctrl_suspend_noirq, \ + intel_pinctrl_resume_noirq) \ +} + +struct intel_community *intel_get_community(struct intel_pinctrl *pctrl, unsigned int pin); + +int intel_get_groups_count(struct pinctrl_dev *pctldev); +const char *intel_get_group_name(struct pinctrl_dev *pctldev, unsigned int group); +int intel_get_group_pins(struct pinctrl_dev *pctldev, unsigned int group, + const unsigned int **pins, unsigned int *npins); + +int intel_get_functions_count(struct pinctrl_dev *pctldev); +const char *intel_get_function_name(struct pinctrl_dev *pctldev, unsigned int function); +int intel_get_function_groups(struct pinctrl_dev *pctldev, unsigned int function, + const char * const **groups, unsigned int * const ngroups); + +#endif /* PINCTRL_INTEL_H */ |