diff options
Diffstat (limited to 'drivers/pinctrl/pinctrl-equilibrium.h')
| -rw-r--r-- | drivers/pinctrl/pinctrl-equilibrium.h | 144 |
1 files changed, 144 insertions, 0 deletions
diff --git a/drivers/pinctrl/pinctrl-equilibrium.h b/drivers/pinctrl/pinctrl-equilibrium.h new file mode 100644 index 0000000000..83768cc8b3 --- /dev/null +++ b/drivers/pinctrl/pinctrl-equilibrium.h @@ -0,0 +1,144 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright(c) 2019 Intel Corporation. + */ + +#ifndef __PINCTRL_EQUILIBRIUM_H +#define __PINCTRL_EQUILIBRIUM_H + +/* PINPAD register offset */ +#define REG_PMX_BASE 0x0 /* Port Multiplexer Control Register */ +#define REG_PUEN 0x80 /* PULL UP Enable Register */ +#define REG_PDEN 0x84 /* PULL DOWN Enable Register */ +#define REG_SRC 0x88 /* Slew Rate Control Register */ +#define REG_DCC0 0x8C /* Drive Current Control Register 0 */ +#define REG_DCC1 0x90 /* Drive Current Control Register 1 */ +#define REG_OD 0x94 /* Open Drain Enable Register */ +#define REG_AVAIL 0x98 /* Pad Control Availability Register */ +#define DRV_CUR_PINS 16 /* Drive Current pin number per register */ +#define REG_DRCC(x) (REG_DCC0 + (x) * 4) /* Driver current macro */ + +/* GPIO register offset */ +#define GPIO_OUT 0x0 /* Data Output Register */ +#define GPIO_IN 0x4 /* Data Input Register */ +#define GPIO_DIR 0x8 /* Direction Register */ +#define GPIO_EXINTCR0 0x18 /* External Interrupt Control Register 0 */ +#define GPIO_EXINTCR1 0x1C /* External Interrupt Control Register 1 */ +#define GPIO_IRNCR 0x20 /* IRN Capture Register */ +#define GPIO_IRNICR 0x24 /* IRN Interrupt Control Register */ +#define GPIO_IRNEN 0x28 /* IRN Interrupt Enable Register */ +#define GPIO_IRNCFG 0x2C /* IRN Interrupt Configuration Register */ +#define GPIO_IRNRNSET 0x30 /* IRN Interrupt Enable Set Register */ +#define GPIO_IRNENCLR 0x34 /* IRN Interrupt Enable Clear Register */ +#define GPIO_OUTSET 0x40 /* Output Set Register */ +#define GPIO_OUTCLR 0x44 /* Output Clear Register */ +#define GPIO_DIRSET 0x48 /* Direction Set Register */ +#define GPIO_DIRCLR 0x4C /* Direction Clear Register */ + +/* parse given pin's driver current value */ +#define PARSE_DRV_CURRENT(val, pin) (((val) >> ((pin) * 2)) & 0x3) + +#define GPIO_EDGE_TRIG 0 +#define GPIO_LEVEL_TRIG 1 +#define GPIO_SINGLE_EDGE 0 +#define GPIO_BOTH_EDGE 1 +#define GPIO_POSITIVE_TRIG 0 +#define GPIO_NEGATIVE_TRIG 1 + +#define EQBR_GPIO_MODE 0 + +typedef enum { + OP_COUNT_NR_FUNCS, + OP_ADD_FUNCS, + OP_COUNT_NR_FUNC_GRPS, + OP_ADD_FUNC_GRPS, + OP_NONE, +} funcs_util_ops; + +/** + * struct gpio_irq_type: gpio irq configuration + * @trig_type: level trigger or edge trigger + * @edge_type: sigle edge or both edge + * @logic_type: positive trigger or negative trigger + */ +struct gpio_irq_type { + unsigned int trig_type; + unsigned int edge_type; + unsigned int logic_type; +}; + +/** + * struct eqbr_pmx_func: represent a pin function. + * @name: name of the pin function, used to lookup the function. + * @groups: one or more names of pin groups that provide this function. + * @nr_groups: number of groups included in @groups. + */ +struct eqbr_pmx_func { + const char *name; + const char **groups; + unsigned int nr_groups; +}; + +/** + * struct eqbr_pin_bank: represent a pin bank. + * @membase: base address of the pin bank register. + * @id: bank id, to idenify the unique bank. + * @pin_base: starting pin number of the pin bank. + * @nr_pins: number of the pins of the pin bank. + * @aval_pinmap: available pin bitmap of the pin bank. + */ +struct eqbr_pin_bank { + void __iomem *membase; + unsigned int id; + unsigned int pin_base; + unsigned int nr_pins; + u32 aval_pinmap; +}; + +struct fwnode_handle; + +/** + * struct eqbr_gpio_ctrl: represent a gpio controller. + * @chip: gpio chip. + * @fwnode: firmware node of gpio controller. + * @bank: pointer to corresponding pin bank. + * @membase: base address of the gpio controller. + * @name: gpio chip name. + * @virq: irq number of the gpio chip to parent's irq domain. + * @lock: spin lock to protect gpio register write. + */ +struct eqbr_gpio_ctrl { + struct gpio_chip chip; + struct fwnode_handle *fwnode; + struct eqbr_pin_bank *bank; + void __iomem *membase; + const char *name; + unsigned int virq; + raw_spinlock_t lock; /* protect gpio register */ +}; + +/** + * struct eqbr_pinctrl_drv_data: + * @dev: device instance representing the controller. + * @pctl_desc: pin controller descriptor. + * @pctl_dev: pin control class device + * @membase: base address of pin controller + * @pin_banks: list of pin banks of the driver. + * @nr_banks: number of pin banks. + * @gpio_ctrls: list of gpio controllers. + * @nr_gpio_ctrls: number of gpio controllers. + * @lock: protect pinctrl register write + */ +struct eqbr_pinctrl_drv_data { + struct device *dev; + struct pinctrl_desc pctl_desc; + struct pinctrl_dev *pctl_dev; + void __iomem *membase; + struct eqbr_pin_bank *pin_banks; + unsigned int nr_banks; + struct eqbr_gpio_ctrl *gpio_ctrls; + unsigned int nr_gpio_ctrls; + raw_spinlock_t lock; /* protect pinpad register */ +}; + +#endif /* __PINCTRL_EQUILIBRIUM_H */ |