diff options
Diffstat (limited to 'drivers/pinctrl/pinctrl-keembay.c')
| -rw-r--r-- | drivers/pinctrl/pinctrl-keembay.c | 1716 |
1 files changed, 1716 insertions, 0 deletions
diff --git a/drivers/pinctrl/pinctrl-keembay.c b/drivers/pinctrl/pinctrl-keembay.c new file mode 100644 index 0000000000..152c35bce8 --- /dev/null +++ b/drivers/pinctrl/pinctrl-keembay.c @@ -0,0 +1,1716 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (C) 2020 Intel Corporation */ + +#include <linux/bitfield.h> +#include <linux/bitops.h> +#include <linux/gpio/driver.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/module.h> + +#include <linux/pinctrl/pinconf.h> +#include <linux/pinctrl/pinconf-generic.h> +#include <linux/pinctrl/pinctrl.h> +#include <linux/pinctrl/pinmux.h> + +#include <linux/platform_device.h> + +#include "core.h" +#include "pinmux.h" + +/* GPIO data registers' offsets */ +#define KEEMBAY_GPIO_DATA_OUT 0x000 +#define KEEMBAY_GPIO_DATA_IN 0x020 +#define KEEMBAY_GPIO_DATA_IN_RAW 0x040 +#define KEEMBAY_GPIO_DATA_HIGH 0x060 +#define KEEMBAY_GPIO_DATA_LOW 0x080 + +/* GPIO Interrupt and mode registers' offsets */ +#define KEEMBAY_GPIO_INT_CFG 0x000 +#define KEEMBAY_GPIO_MODE 0x070 + +/* GPIO mode register bit fields */ +#define KEEMBAY_GPIO_MODE_PULLUP_MASK GENMASK(13, 12) +#define KEEMBAY_GPIO_MODE_DRIVE_MASK GENMASK(8, 7) +#define KEEMBAY_GPIO_MODE_INV_MASK GENMASK(5, 4) +#define KEEMBAY_GPIO_MODE_SELECT_MASK GENMASK(2, 0) +#define KEEMBAY_GPIO_MODE_DIR_OVR BIT(15) +#define KEEMBAY_GPIO_MODE_REN BIT(11) +#define KEEMBAY_GPIO_MODE_SCHMITT_EN BIT(10) +#define KEEMBAY_GPIO_MODE_SLEW_RATE BIT(9) +#define KEEMBAY_GPIO_IRQ_ENABLE BIT(7) +#define KEEMBAY_GPIO_MODE_DIR BIT(3) +#define KEEMBAY_GPIO_MODE_DEFAULT 0x7 +#define KEEMBAY_GPIO_MODE_INV_VAL 0x3 + +#define KEEMBAY_GPIO_DISABLE 0 +#define KEEMBAY_GPIO_PULL_UP 1 +#define KEEMBAY_GPIO_PULL_DOWN 2 +#define KEEMBAY_GPIO_BUS_HOLD 3 +#define KEEMBAY_GPIO_NUM_IRQ 8 +#define KEEMBAY_GPIO_MAX_PER_IRQ 4 +#define KEEMBAY_GPIO_MAX_PER_REG 32 +#define KEEMBAY_GPIO_MIN_STRENGTH 2 +#define KEEMBAY_GPIO_MAX_STRENGTH 12 +#define KEEMBAY_GPIO_SENSE_LOW (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_EDGE_FALLING) + +/* GPIO reg address calculation */ +#define KEEMBAY_GPIO_REG_OFFSET(pin) ((pin) * 4) + +/** + * struct keembay_mux_desc - Mux properties of each GPIO pin + * @mode: Pin mode when operating in this function + * @name: Pin function name + */ +struct keembay_mux_desc { + u8 mode; + const char *name; +}; + +#define KEEMBAY_PIN_DESC(pin_number, pin_name, ...) { \ + .number = pin_number, \ + .name = pin_name, \ + .drv_data = &(struct keembay_mux_desc[]) { \ + __VA_ARGS__, { } }, \ +} \ + +#define KEEMBAY_MUX(pin_mode, pin_function) { \ + .mode = pin_mode, \ + .name = pin_function, \ +} \ + +/** + * struct keembay_gpio_irq - Config of each GPIO Interrupt sources + * @source: Interrupt source number (0 - 7) + * @line: Actual Interrupt line number + * @pins: Array of GPIO pins using this Interrupt line + * @trigger: Interrupt trigger type for this line + * @num_share: Number of pins currently using this Interrupt line + */ +struct keembay_gpio_irq { + unsigned int source; + unsigned int line; + unsigned int pins[KEEMBAY_GPIO_MAX_PER_IRQ]; + unsigned int trigger; + unsigned int num_share; +}; + +/** + * struct keembay_pinctrl - Intel Keembay pinctrl structure + * @pctrl: Pointer to the pin controller device + * @base0: First register base address + * @base1: Second register base address + * @dev: Pointer to the device structure + * @chip: GPIO chip used by this pin controller + * @soc: Pin control configuration data based on SoC + * @lock: Spinlock to protect various gpio config register access + * @ngroups: Number of pin groups available + * @nfuncs: Number of pin functions available + * @npins: Number of GPIO pins available + * @irq: Store Interrupt source + * @max_gpios_level_type: Store max level trigger type + * @max_gpios_edge_type: Store max edge trigger type + */ +struct keembay_pinctrl { + struct pinctrl_dev *pctrl; + void __iomem *base0; + void __iomem *base1; + struct device *dev; + struct gpio_chip chip; + const struct keembay_pin_soc *soc; + raw_spinlock_t lock; + unsigned int ngroups; + unsigned int nfuncs; + unsigned int npins; + struct keembay_gpio_irq irq[KEEMBAY_GPIO_NUM_IRQ]; + int max_gpios_level_type; + int max_gpios_edge_type; +}; + +/** + * struct keembay_pin_soc - Pin control config data based on SoC + * @pins: Pin description structure + */ +struct keembay_pin_soc { + const struct pinctrl_pin_desc *pins; +}; + +static const struct pinctrl_pin_desc keembay_pins[] = { + KEEMBAY_PIN_DESC(0, "GPIO0", + KEEMBAY_MUX(0x0, "I2S0_M0"), + KEEMBAY_MUX(0x1, "SD0_M1"), + KEEMBAY_MUX(0x2, "SLVDS0_M2"), + KEEMBAY_MUX(0x3, "I2C0_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "ETH_M5"), + KEEMBAY_MUX(0x6, "LCD_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(1, "GPIO1", + KEEMBAY_MUX(0x0, "I2S0_M0"), + KEEMBAY_MUX(0x1, "SD0_M1"), + KEEMBAY_MUX(0x2, "SLVDS0_M2"), + KEEMBAY_MUX(0x3, "I2C0_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "ETH_M5"), + KEEMBAY_MUX(0x6, "LCD_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(2, "GPIO2", + KEEMBAY_MUX(0x0, "I2S0_M0"), + KEEMBAY_MUX(0x1, "I2S0_M1"), + KEEMBAY_MUX(0x2, "SLVDS0_M2"), + KEEMBAY_MUX(0x3, "I2C1_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "ETH_M5"), + KEEMBAY_MUX(0x6, "LCD_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(3, "GPIO3", + KEEMBAY_MUX(0x0, "I2S0_M0"), + KEEMBAY_MUX(0x1, "I2S0_M1"), + KEEMBAY_MUX(0x2, "SLVDS0_M2"), + KEEMBAY_MUX(0x3, "I2C1_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "ETH_M5"), + KEEMBAY_MUX(0x6, "LCD_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(4, "GPIO4", + KEEMBAY_MUX(0x0, "I2S0_M0"), + KEEMBAY_MUX(0x1, "I2S0_M1"), + KEEMBAY_MUX(0x2, "SLVDS0_M2"), + KEEMBAY_MUX(0x3, "I2C2_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "ETH_M5"), + KEEMBAY_MUX(0x6, "LCD_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(5, "GPIO5", + KEEMBAY_MUX(0x0, "I2S0_M0"), + KEEMBAY_MUX(0x1, "I2S0_M1"), + KEEMBAY_MUX(0x2, "SLVDS0_M2"), + KEEMBAY_MUX(0x3, "I2C2_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "ETH_M5"), + KEEMBAY_MUX(0x6, "LCD_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(6, "GPIO6", + KEEMBAY_MUX(0x0, "I2S1_M0"), + KEEMBAY_MUX(0x1, "SD0_M1"), + KEEMBAY_MUX(0x2, "SLVDS0_M2"), + KEEMBAY_MUX(0x3, "I2C3_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "ETH_M5"), + KEEMBAY_MUX(0x6, "LCD_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(7, "GPIO7", + KEEMBAY_MUX(0x0, "I2S1_M0"), + KEEMBAY_MUX(0x1, "SD0_M1"), + KEEMBAY_MUX(0x2, "SLVDS0_M2"), + KEEMBAY_MUX(0x3, "I2C3_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "ETH_M5"), + KEEMBAY_MUX(0x6, "LCD_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(8, "GPIO8", + KEEMBAY_MUX(0x0, "I2S1_M0"), + KEEMBAY_MUX(0x1, "I2S1_M1"), + KEEMBAY_MUX(0x2, "SLVDS0_M2"), + KEEMBAY_MUX(0x3, "UART0_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "ETH_M5"), + KEEMBAY_MUX(0x6, "LCD_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(9, "GPIO9", + KEEMBAY_MUX(0x0, "I2S1_M0"), + KEEMBAY_MUX(0x1, "I2S1_M1"), + KEEMBAY_MUX(0x2, "PWM_M2"), + KEEMBAY_MUX(0x3, "UART0_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "ETH_M5"), + KEEMBAY_MUX(0x6, "LCD_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(10, "GPIO10", + KEEMBAY_MUX(0x0, "I2S2_M0"), + KEEMBAY_MUX(0x1, "SD0_M1"), + KEEMBAY_MUX(0x2, "PWM_M2"), + KEEMBAY_MUX(0x3, "UART0_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "ETH_M5"), + KEEMBAY_MUX(0x6, "LCD_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(11, "GPIO11", + KEEMBAY_MUX(0x0, "I2S2_M0"), + KEEMBAY_MUX(0x1, "SD0_M1"), + KEEMBAY_MUX(0x2, "PWM_M2"), + KEEMBAY_MUX(0x3, "UART0_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "ETH_M5"), + KEEMBAY_MUX(0x6, "LCD_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(12, "GPIO12", + KEEMBAY_MUX(0x0, "I2S2_M0"), + KEEMBAY_MUX(0x1, "I2S2_M1"), + KEEMBAY_MUX(0x2, "PWM_M2"), + KEEMBAY_MUX(0x3, "SPI0_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "ETH_M5"), + KEEMBAY_MUX(0x6, "LCD_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(13, "GPIO13", + KEEMBAY_MUX(0x0, "I2S2_M0"), + KEEMBAY_MUX(0x1, "I2S2_M1"), + KEEMBAY_MUX(0x2, "PWM_M2"), + KEEMBAY_MUX(0x3, "SPI0_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "ETH_M5"), + KEEMBAY_MUX(0x6, "LCD_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(14, "GPIO14", + KEEMBAY_MUX(0x0, "UART0_M0"), + KEEMBAY_MUX(0x1, "I2S3_M1"), + KEEMBAY_MUX(0x2, "PWM_M2"), + KEEMBAY_MUX(0x3, "SD1_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "ETH_M5"), + KEEMBAY_MUX(0x6, "LCD_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(15, "GPIO15", + KEEMBAY_MUX(0x0, "UART0_M0"), + KEEMBAY_MUX(0x1, "I2S3_M1"), + KEEMBAY_MUX(0x2, "UART0_M2"), + KEEMBAY_MUX(0x3, "SD1_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "SPI1_M5"), + KEEMBAY_MUX(0x6, "LCD_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(16, "GPIO16", + KEEMBAY_MUX(0x0, "UART0_M0"), + KEEMBAY_MUX(0x1, "I2S3_M1"), + KEEMBAY_MUX(0x2, "UART0_M2"), + KEEMBAY_MUX(0x3, "SD1_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "SPI1_M5"), + KEEMBAY_MUX(0x6, "LCD_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(17, "GPIO17", + KEEMBAY_MUX(0x0, "UART0_M0"), + KEEMBAY_MUX(0x1, "I2S3_M1"), + KEEMBAY_MUX(0x2, "I2S3_M2"), + KEEMBAY_MUX(0x3, "SD1_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "SPI1_M5"), + KEEMBAY_MUX(0x6, "LCD_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(18, "GPIO18", + KEEMBAY_MUX(0x0, "UART1_M0"), + KEEMBAY_MUX(0x1, "SPI0_M1"), + KEEMBAY_MUX(0x2, "I2S3_M2"), + KEEMBAY_MUX(0x3, "SD1_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "SPI1_M5"), + KEEMBAY_MUX(0x6, "LCD_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(19, "GPIO19", + KEEMBAY_MUX(0x0, "UART1_M0"), + KEEMBAY_MUX(0x1, "LCD_M1"), + KEEMBAY_MUX(0x2, "DEBUG_M2"), + KEEMBAY_MUX(0x3, "SD1_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "SPI1_M5"), + KEEMBAY_MUX(0x6, "LCD_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(20, "GPIO20", + KEEMBAY_MUX(0x0, "UART1_M0"), + KEEMBAY_MUX(0x1, "LCD_M1"), + KEEMBAY_MUX(0x2, "DEBUG_M2"), + KEEMBAY_MUX(0x3, "CPR_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "SPI1_M5"), + KEEMBAY_MUX(0x6, "SLVDS0_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(21, "GPIO21", + KEEMBAY_MUX(0x0, "UART1_M0"), + KEEMBAY_MUX(0x1, "LCD_M1"), + KEEMBAY_MUX(0x2, "DEBUG_M2"), + KEEMBAY_MUX(0x3, "CPR_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "I3C0_M5"), + KEEMBAY_MUX(0x6, "SLVDS0_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(22, "GPIO22", + KEEMBAY_MUX(0x0, "I2C0_M0"), + KEEMBAY_MUX(0x1, "UART2_M1"), + KEEMBAY_MUX(0x2, "DEBUG_M2"), + KEEMBAY_MUX(0x3, "CPR_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "I3C0_M5"), + KEEMBAY_MUX(0x6, "SLVDS0_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(23, "GPIO23", + KEEMBAY_MUX(0x0, "I2C0_M0"), + KEEMBAY_MUX(0x1, "UART2_M1"), + KEEMBAY_MUX(0x2, "DEBUG_M2"), + KEEMBAY_MUX(0x3, "CPR_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "I3C1_M5"), + KEEMBAY_MUX(0x6, "SLVDS0_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(24, "GPIO24", + KEEMBAY_MUX(0x0, "I2C1_M0"), + KEEMBAY_MUX(0x1, "UART2_M1"), + KEEMBAY_MUX(0x2, "DEBUG_M2"), + KEEMBAY_MUX(0x3, "CPR_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "I3C1_M5"), + KEEMBAY_MUX(0x6, "SLVDS0_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(25, "GPIO25", + KEEMBAY_MUX(0x0, "I2C1_M0"), + KEEMBAY_MUX(0x1, "UART2_M1"), + KEEMBAY_MUX(0x2, "SPI0_M2"), + KEEMBAY_MUX(0x3, "CPR_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "I3C2_M5"), + KEEMBAY_MUX(0x6, "SLVDS0_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(26, "GPIO26", + KEEMBAY_MUX(0x0, "SPI0_M0"), + KEEMBAY_MUX(0x1, "I2C2_M1"), + KEEMBAY_MUX(0x2, "UART0_M2"), + KEEMBAY_MUX(0x3, "DSU_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "I3C2_M5"), + KEEMBAY_MUX(0x6, "SLVDS0_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(27, "GPIO27", + KEEMBAY_MUX(0x0, "SPI0_M0"), + KEEMBAY_MUX(0x1, "I2C2_M1"), + KEEMBAY_MUX(0x2, "UART0_M2"), + KEEMBAY_MUX(0x3, "DSU_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "I3C0_M5"), + KEEMBAY_MUX(0x6, "SLVDS0_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(28, "GPIO28", + KEEMBAY_MUX(0x0, "SPI0_M0"), + KEEMBAY_MUX(0x1, "I2C3_M1"), + KEEMBAY_MUX(0x2, "UART0_M2"), + KEEMBAY_MUX(0x3, "PWM_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "I3C1_M5"), + KEEMBAY_MUX(0x6, "SLVDS0_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(29, "GPIO29", + KEEMBAY_MUX(0x0, "SPI0_M0"), + KEEMBAY_MUX(0x1, "I2C3_M1"), + KEEMBAY_MUX(0x2, "UART0_M2"), + KEEMBAY_MUX(0x3, "PWM_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "I3C2_M5"), + KEEMBAY_MUX(0x6, "SLVDS1_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(30, "GPIO30", + KEEMBAY_MUX(0x0, "SPI0_M0"), + KEEMBAY_MUX(0x1, "I2S0_M1"), + KEEMBAY_MUX(0x2, "I2C4_M2"), + KEEMBAY_MUX(0x3, "PWM_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "SLVDS1_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(31, "GPIO31", + KEEMBAY_MUX(0x0, "SPI0_M0"), + KEEMBAY_MUX(0x1, "I2S0_M1"), + KEEMBAY_MUX(0x2, "I2C4_M2"), + KEEMBAY_MUX(0x3, "PWM_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "UART1_M5"), + KEEMBAY_MUX(0x6, "SLVDS1_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(32, "GPIO32", + KEEMBAY_MUX(0x0, "SD0_M0"), + KEEMBAY_MUX(0x1, "SPI0_M1"), + KEEMBAY_MUX(0x2, "UART1_M2"), + KEEMBAY_MUX(0x3, "PWM_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "PCIE_M5"), + KEEMBAY_MUX(0x6, "SLVDS1_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(33, "GPIO33", + KEEMBAY_MUX(0x0, "SD0_M0"), + KEEMBAY_MUX(0x1, "SPI0_M1"), + KEEMBAY_MUX(0x2, "UART1_M2"), + KEEMBAY_MUX(0x3, "PWM_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "PCIE_M5"), + KEEMBAY_MUX(0x6, "SLVDS1_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(34, "GPIO34", + KEEMBAY_MUX(0x0, "SD0_M0"), + KEEMBAY_MUX(0x1, "SPI0_M1"), + KEEMBAY_MUX(0x2, "I2C0_M2"), + KEEMBAY_MUX(0x3, "UART1_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "I2S0_M5"), + KEEMBAY_MUX(0x6, "SLVDS1_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(35, "GPIO35", + KEEMBAY_MUX(0x0, "SD0_M0"), + KEEMBAY_MUX(0x1, "PCIE_M1"), + KEEMBAY_MUX(0x2, "I2C0_M2"), + KEEMBAY_MUX(0x3, "UART1_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "I2S0_M5"), + KEEMBAY_MUX(0x6, "SLVDS1_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(36, "GPIO36", + KEEMBAY_MUX(0x0, "SD0_M0"), + KEEMBAY_MUX(0x1, "SPI3_M1"), + KEEMBAY_MUX(0x2, "I2C1_M2"), + KEEMBAY_MUX(0x3, "DEBUG_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "I2S0_M5"), + KEEMBAY_MUX(0x6, "SLVDS1_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(37, "GPIO37", + KEEMBAY_MUX(0x0, "SD0_M0"), + KEEMBAY_MUX(0x1, "SPI3_M1"), + KEEMBAY_MUX(0x2, "I2C1_M2"), + KEEMBAY_MUX(0x3, "DEBUG_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "I2S0_M5"), + KEEMBAY_MUX(0x6, "SLVDS1_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(38, "GPIO38", + KEEMBAY_MUX(0x0, "I3C1_M0"), + KEEMBAY_MUX(0x1, "SPI3_M1"), + KEEMBAY_MUX(0x2, "UART3_M2"), + KEEMBAY_MUX(0x3, "DEBUG_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "I2C2_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(39, "GPIO39", + KEEMBAY_MUX(0x0, "I3C1_M0"), + KEEMBAY_MUX(0x1, "SPI3_M1"), + KEEMBAY_MUX(0x2, "UART3_M2"), + KEEMBAY_MUX(0x3, "DEBUG_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "I2C2_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(40, "GPIO40", + KEEMBAY_MUX(0x0, "I2S2_M0"), + KEEMBAY_MUX(0x1, "SPI3_M1"), + KEEMBAY_MUX(0x2, "UART3_M2"), + KEEMBAY_MUX(0x3, "DEBUG_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "I2C3_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(41, "GPIO41", + KEEMBAY_MUX(0x0, "ETH_M0"), + KEEMBAY_MUX(0x1, "SPI3_M1"), + KEEMBAY_MUX(0x2, "SPI3_M2"), + KEEMBAY_MUX(0x3, "DEBUG_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "I2C3_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(42, "GPIO42", + KEEMBAY_MUX(0x0, "ETH_M0"), + KEEMBAY_MUX(0x1, "SD1_M1"), + KEEMBAY_MUX(0x2, "SPI3_M2"), + KEEMBAY_MUX(0x3, "CPR_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "I2C4_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(43, "GPIO43", + KEEMBAY_MUX(0x0, "ETH_M0"), + KEEMBAY_MUX(0x1, "SD1_M1"), + KEEMBAY_MUX(0x2, "SPI3_M2"), + KEEMBAY_MUX(0x3, "CPR_M3"), + KEEMBAY_MUX(0x4, "I2S0_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "I2C4_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(44, "GPIO44", + KEEMBAY_MUX(0x0, "ETH_M0"), + KEEMBAY_MUX(0x1, "SD1_M1"), + KEEMBAY_MUX(0x2, "SPI0_M2"), + KEEMBAY_MUX(0x3, "CPR_M3"), + KEEMBAY_MUX(0x4, "I2S0_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "CAM_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(45, "GPIO45", + KEEMBAY_MUX(0x0, "ETH_M0"), + KEEMBAY_MUX(0x1, "SD1_M1"), + KEEMBAY_MUX(0x2, "SPI0_M2"), + KEEMBAY_MUX(0x3, "CPR_M3"), + KEEMBAY_MUX(0x4, "I2S0_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "CAM_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(46, "GPIO46", + KEEMBAY_MUX(0x0, "ETH_M0"), + KEEMBAY_MUX(0x1, "SD1_M1"), + KEEMBAY_MUX(0x2, "SPI0_M2"), + KEEMBAY_MUX(0x3, "TPIU_M3"), + KEEMBAY_MUX(0x4, "I2S0_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "CAM_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(47, "GPIO47", + KEEMBAY_MUX(0x0, "ETH_M0"), + KEEMBAY_MUX(0x1, "SD1_M1"), + KEEMBAY_MUX(0x2, "SPI0_M2"), + KEEMBAY_MUX(0x3, "TPIU_M3"), + KEEMBAY_MUX(0x4, "I2S0_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "CAM_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(48, "GPIO48", + KEEMBAY_MUX(0x0, "ETH_M0"), + KEEMBAY_MUX(0x1, "SPI2_M1"), + KEEMBAY_MUX(0x2, "UART2_M2"), + KEEMBAY_MUX(0x3, "TPIU_M3"), + KEEMBAY_MUX(0x4, "I2S0_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "CAM_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(49, "GPIO49", + KEEMBAY_MUX(0x0, "ETH_M0"), + KEEMBAY_MUX(0x1, "SPI2_M1"), + KEEMBAY_MUX(0x2, "UART2_M2"), + KEEMBAY_MUX(0x3, "TPIU_M3"), + KEEMBAY_MUX(0x4, "I2S1_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "CAM_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(50, "GPIO50", + KEEMBAY_MUX(0x0, "ETH_M0"), + KEEMBAY_MUX(0x1, "SPI2_M1"), + KEEMBAY_MUX(0x2, "UART2_M2"), + KEEMBAY_MUX(0x3, "TPIU_M3"), + KEEMBAY_MUX(0x4, "I2S1_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "CAM_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(51, "GPIO51", + KEEMBAY_MUX(0x0, "ETH_M0"), + KEEMBAY_MUX(0x1, "SPI2_M1"), + KEEMBAY_MUX(0x2, "UART2_M2"), + KEEMBAY_MUX(0x3, "TPIU_M3"), + KEEMBAY_MUX(0x4, "I2S1_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "CAM_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(52, "GPIO52", + KEEMBAY_MUX(0x0, "ETH_M0"), + KEEMBAY_MUX(0x1, "SPI2_M1"), + KEEMBAY_MUX(0x2, "SD0_M2"), + KEEMBAY_MUX(0x3, "TPIU_M3"), + KEEMBAY_MUX(0x4, "I2S1_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "CAM_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(53, "GPIO53", + KEEMBAY_MUX(0x0, "ETH_M0"), + KEEMBAY_MUX(0x1, "SPI2_M1"), + KEEMBAY_MUX(0x2, "SD0_M2"), + KEEMBAY_MUX(0x3, "TPIU_M3"), + KEEMBAY_MUX(0x4, "I2S2_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "CAM_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(54, "GPIO54", + KEEMBAY_MUX(0x0, "ETH_M0"), + KEEMBAY_MUX(0x1, "SPI2_M1"), + KEEMBAY_MUX(0x2, "SD0_M2"), + KEEMBAY_MUX(0x3, "TPIU_M3"), + KEEMBAY_MUX(0x4, "I2S2_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "CAM_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(55, "GPIO55", + KEEMBAY_MUX(0x0, "ETH_M0"), + KEEMBAY_MUX(0x1, "SPI2_M1"), + KEEMBAY_MUX(0x2, "SD1_M2"), + KEEMBAY_MUX(0x3, "TPIU_M3"), + KEEMBAY_MUX(0x4, "I2S2_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "CAM_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(56, "GPIO56", + KEEMBAY_MUX(0x0, "ETH_M0"), + KEEMBAY_MUX(0x1, "SPI2_M1"), + KEEMBAY_MUX(0x2, "SD1_M2"), + KEEMBAY_MUX(0x3, "TPIU_M3"), + KEEMBAY_MUX(0x4, "I2S2_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "CAM_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(57, "GPIO57", + KEEMBAY_MUX(0x0, "SPI1_M0"), + KEEMBAY_MUX(0x1, "I2S1_M1"), + KEEMBAY_MUX(0x2, "SD1_M2"), + KEEMBAY_MUX(0x3, "TPIU_M3"), + KEEMBAY_MUX(0x4, "UART0_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "CAM_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(58, "GPIO58", + KEEMBAY_MUX(0x0, "SPI1_M0"), + KEEMBAY_MUX(0x1, "ETH_M1"), + KEEMBAY_MUX(0x2, "SD0_M2"), + KEEMBAY_MUX(0x3, "TPIU_M3"), + KEEMBAY_MUX(0x4, "UART0_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "CAM_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(59, "GPIO59", + KEEMBAY_MUX(0x0, "SPI1_M0"), + KEEMBAY_MUX(0x1, "ETH_M1"), + KEEMBAY_MUX(0x2, "SD0_M2"), + KEEMBAY_MUX(0x3, "TPIU_M3"), + KEEMBAY_MUX(0x4, "UART0_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "CAM_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(60, "GPIO60", + KEEMBAY_MUX(0x0, "SPI1_M0"), + KEEMBAY_MUX(0x1, "ETH_M1"), + KEEMBAY_MUX(0x2, "I3C1_M2"), + KEEMBAY_MUX(0x3, "TPIU_M3"), + KEEMBAY_MUX(0x4, "UART0_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "CAM_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(61, "GPIO61", + KEEMBAY_MUX(0x0, "SPI1_M0"), + KEEMBAY_MUX(0x1, "ETH_M1"), + KEEMBAY_MUX(0x2, "SD0_M2"), + KEEMBAY_MUX(0x3, "TPIU_M3"), + KEEMBAY_MUX(0x4, "UART1_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "CAM_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(62, "GPIO62", + KEEMBAY_MUX(0x0, "SPI1_M0"), + KEEMBAY_MUX(0x1, "ETH_M1"), + KEEMBAY_MUX(0x2, "SD1_M2"), + KEEMBAY_MUX(0x3, "TPIU_M3"), + KEEMBAY_MUX(0x4, "UART1_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "CAM_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(63, "GPIO63", + KEEMBAY_MUX(0x0, "I2S1_M0"), + KEEMBAY_MUX(0x1, "SPI1_M1"), + KEEMBAY_MUX(0x2, "SD1_M2"), + KEEMBAY_MUX(0x3, "TPIU_M3"), + KEEMBAY_MUX(0x4, "UART1_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "CAM_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(64, "GPIO64", + KEEMBAY_MUX(0x0, "I2S2_M0"), + KEEMBAY_MUX(0x1, "SPI1_M1"), + KEEMBAY_MUX(0x2, "ETH_M2"), + KEEMBAY_MUX(0x3, "TPIU_M3"), + KEEMBAY_MUX(0x4, "UART1_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "CAM_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(65, "GPIO65", + KEEMBAY_MUX(0x0, "I3C0_M0"), + KEEMBAY_MUX(0x1, "SPI1_M1"), + KEEMBAY_MUX(0x2, "SD1_M2"), + KEEMBAY_MUX(0x3, "TPIU_M3"), + KEEMBAY_MUX(0x4, "SPI0_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "CAM_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(66, "GPIO66", + KEEMBAY_MUX(0x0, "I3C0_M0"), + KEEMBAY_MUX(0x1, "ETH_M1"), + KEEMBAY_MUX(0x2, "I2C0_M2"), + KEEMBAY_MUX(0x3, "TPIU_M3"), + KEEMBAY_MUX(0x4, "SPI0_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "CAM_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(67, "GPIO67", + KEEMBAY_MUX(0x0, "I3C1_M0"), + KEEMBAY_MUX(0x1, "ETH_M1"), + KEEMBAY_MUX(0x2, "I2C0_M2"), + KEEMBAY_MUX(0x3, "TPIU_M3"), + KEEMBAY_MUX(0x4, "SPI0_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "I2S3_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(68, "GPIO68", + KEEMBAY_MUX(0x0, "I3C1_M0"), + KEEMBAY_MUX(0x1, "ETH_M1"), + KEEMBAY_MUX(0x2, "I2C1_M2"), + KEEMBAY_MUX(0x3, "TPIU_M3"), + KEEMBAY_MUX(0x4, "SPI0_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "I2S3_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(69, "GPIO69", + KEEMBAY_MUX(0x0, "I3C2_M0"), + KEEMBAY_MUX(0x1, "ETH_M1"), + KEEMBAY_MUX(0x2, "I2C1_M2"), + KEEMBAY_MUX(0x3, "TPIU_M3"), + KEEMBAY_MUX(0x4, "SPI0_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "I2S3_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(70, "GPIO70", + KEEMBAY_MUX(0x0, "I3C2_M0"), + KEEMBAY_MUX(0x1, "ETH_M1"), + KEEMBAY_MUX(0x2, "SPI0_M2"), + KEEMBAY_MUX(0x3, "TPIU_M3"), + KEEMBAY_MUX(0x4, "SD0_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "I2S3_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(71, "GPIO71", + KEEMBAY_MUX(0x0, "I3C0_M0"), + KEEMBAY_MUX(0x1, "ETH_M1"), + KEEMBAY_MUX(0x2, "SLVDS1_M2"), + KEEMBAY_MUX(0x3, "TPIU_M3"), + KEEMBAY_MUX(0x4, "SD0_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "I2S3_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(72, "GPIO72", + KEEMBAY_MUX(0x0, "I3C1_M0"), + KEEMBAY_MUX(0x1, "ETH_M1"), + KEEMBAY_MUX(0x2, "SLVDS1_M2"), + KEEMBAY_MUX(0x3, "TPIU_M3"), + KEEMBAY_MUX(0x4, "SD0_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "UART2_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(73, "GPIO73", + KEEMBAY_MUX(0x0, "I3C2_M0"), + KEEMBAY_MUX(0x1, "ETH_M1"), + KEEMBAY_MUX(0x2, "SLVDS1_M2"), + KEEMBAY_MUX(0x3, "TPIU_M3"), + KEEMBAY_MUX(0x4, "SD0_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "UART2_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(74, "GPIO74", + KEEMBAY_MUX(0x0, "I3C0_M0"), + KEEMBAY_MUX(0x1, "ETH_M1"), + KEEMBAY_MUX(0x2, "SLVDS1_M2"), + KEEMBAY_MUX(0x3, "TPIU_M3"), + KEEMBAY_MUX(0x4, "SD0_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "UART2_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(75, "GPIO75", + KEEMBAY_MUX(0x0, "I3C0_M0"), + KEEMBAY_MUX(0x1, "ETH_M1"), + KEEMBAY_MUX(0x2, "SLVDS1_M2"), + KEEMBAY_MUX(0x3, "TPIU_M3"), + KEEMBAY_MUX(0x4, "SD0_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "UART2_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(76, "GPIO76", + KEEMBAY_MUX(0x0, "I2C2_M0"), + KEEMBAY_MUX(0x1, "I3C0_M1"), + KEEMBAY_MUX(0x2, "SLVDS1_M2"), + KEEMBAY_MUX(0x3, "TPIU_M3"), + KEEMBAY_MUX(0x4, "ETH_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "UART3_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(77, "GPIO77", + KEEMBAY_MUX(0x0, "PCIE_M0"), + KEEMBAY_MUX(0x1, "I3C1_M1"), + KEEMBAY_MUX(0x2, "SLVDS1_M2"), + KEEMBAY_MUX(0x3, "TPIU_M3"), + KEEMBAY_MUX(0x4, "I3C2_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "UART3_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(78, "GPIO78", + KEEMBAY_MUX(0x0, "PCIE_M0"), + KEEMBAY_MUX(0x1, "I3C2_M1"), + KEEMBAY_MUX(0x2, "SLVDS1_M2"), + KEEMBAY_MUX(0x3, "TPIU_M3"), + KEEMBAY_MUX(0x4, "I3C2_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "UART3_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(79, "GPIO79", + KEEMBAY_MUX(0x0, "PCIE_M0"), + KEEMBAY_MUX(0x1, "I2C2_M1"), + KEEMBAY_MUX(0x2, "SLVDS1_M2"), + KEEMBAY_MUX(0x3, "TPIU_M3"), + KEEMBAY_MUX(0x4, "I3C2_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "UART3_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), +}; + +static inline u32 keembay_read_reg(void __iomem *base, unsigned int pin) +{ + return readl(base + KEEMBAY_GPIO_REG_OFFSET(pin)); +} + +static inline u32 keembay_read_gpio_reg(void __iomem *base, unsigned int pin) +{ + return keembay_read_reg(base, pin / KEEMBAY_GPIO_MAX_PER_REG); +} + +static inline u32 keembay_read_pin(void __iomem *base, unsigned int pin) +{ + u32 val = keembay_read_gpio_reg(base, pin); + + return !!(val & BIT(pin % KEEMBAY_GPIO_MAX_PER_REG)); +} + +static inline void keembay_write_reg(u32 val, void __iomem *base, unsigned int pin) +{ + writel(val, base + KEEMBAY_GPIO_REG_OFFSET(pin)); +} + +static inline void keembay_write_gpio_reg(u32 val, void __iomem *base, unsigned int pin) +{ + keembay_write_reg(val, base, pin / KEEMBAY_GPIO_MAX_PER_REG); +} + +static void keembay_gpio_invert(struct keembay_pinctrl *kpc, unsigned int pin) +{ + unsigned int val = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_MODE, pin); + + /* + * This IP doesn't support the falling edge and low level interrupt + * trigger. Invert API is used to mimic the falling edge and low + * level support + */ + + val |= FIELD_PREP(KEEMBAY_GPIO_MODE_INV_MASK, KEEMBAY_GPIO_MODE_INV_VAL); + keembay_write_reg(val, kpc->base1 + KEEMBAY_GPIO_MODE, pin); +} + +static void keembay_gpio_restore_default(struct keembay_pinctrl *kpc, unsigned int pin) +{ + unsigned int val = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_MODE, pin); + + val &= FIELD_PREP(KEEMBAY_GPIO_MODE_INV_MASK, 0); + keembay_write_reg(val, kpc->base1 + KEEMBAY_GPIO_MODE, pin); +} + +static int keembay_request_gpio(struct pinctrl_dev *pctldev, + struct pinctrl_gpio_range *range, unsigned int pin) +{ + struct keembay_pinctrl *kpc = pinctrl_dev_get_drvdata(pctldev); + unsigned int val; + + if (pin >= kpc->npins) + return -EINVAL; + + val = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_MODE, pin); + val = FIELD_GET(KEEMBAY_GPIO_MODE_SELECT_MASK, val); + + /* As per Pin Mux Map, Modes 0 to 6 are for peripherals */ + if (val != KEEMBAY_GPIO_MODE_DEFAULT) + return -EBUSY; + + return 0; +} + +static int keembay_set_mux(struct pinctrl_dev *pctldev, unsigned int fun_sel, + unsigned int grp_sel) +{ + struct keembay_pinctrl *kpc = pinctrl_dev_get_drvdata(pctldev); + struct function_desc *func; + struct group_desc *grp; + unsigned int val; + u8 pin_mode; + int pin; + + grp = pinctrl_generic_get_group(pctldev, grp_sel); + if (!grp) + return -EINVAL; + + func = pinmux_generic_get_function(pctldev, fun_sel); + if (!func) + return -EINVAL; + + /* Change modes for pins in the selected group */ + pin = *grp->pins; + pin_mode = *(u8 *)(func->data); + + val = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_MODE, pin); + val = u32_replace_bits(val, pin_mode, KEEMBAY_GPIO_MODE_SELECT_MASK); + keembay_write_reg(val, kpc->base1 + KEEMBAY_GPIO_MODE, pin); + + return 0; +} + +static u32 keembay_pinconf_get_pull(struct keembay_pinctrl *kpc, unsigned int pin) +{ + unsigned int val = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_MODE, pin); + + return FIELD_GET(KEEMBAY_GPIO_MODE_PULLUP_MASK, val); +} + +static int keembay_pinconf_set_pull(struct keembay_pinctrl *kpc, unsigned int pin, + unsigned int pull) +{ + unsigned int val = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_MODE, pin); + + val = u32_replace_bits(val, pull, KEEMBAY_GPIO_MODE_PULLUP_MASK); + keembay_write_reg(val, kpc->base1 + KEEMBAY_GPIO_MODE, pin); + + return 0; +} + +static int keembay_pinconf_get_drive(struct keembay_pinctrl *kpc, unsigned int pin) +{ + unsigned int val = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_MODE, pin); + + val = FIELD_GET(KEEMBAY_GPIO_MODE_DRIVE_MASK, val) * 4; + if (val) + return val; + + return KEEMBAY_GPIO_MIN_STRENGTH; +} + +static int keembay_pinconf_set_drive(struct keembay_pinctrl *kpc, unsigned int pin, + unsigned int drive) +{ + unsigned int val = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_MODE, pin); + unsigned int strength = clamp_val(drive, KEEMBAY_GPIO_MIN_STRENGTH, + KEEMBAY_GPIO_MAX_STRENGTH) / 4; + + val = u32_replace_bits(val, strength, KEEMBAY_GPIO_MODE_DRIVE_MASK); + keembay_write_reg(val, kpc->base1 + KEEMBAY_GPIO_MODE, pin); + + return 0; +} + +static int keembay_pinconf_get_slew_rate(struct keembay_pinctrl *kpc, unsigned int pin) +{ + unsigned int val = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_MODE, pin); + + return !!(val & KEEMBAY_GPIO_MODE_SLEW_RATE); +} + +static int keembay_pinconf_set_slew_rate(struct keembay_pinctrl *kpc, unsigned int pin, + unsigned int slew_rate) +{ + unsigned int val = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_MODE, pin); + + if (slew_rate) + val |= KEEMBAY_GPIO_MODE_SLEW_RATE; + else + val &= ~KEEMBAY_GPIO_MODE_SLEW_RATE; + + keembay_write_reg(val, kpc->base1 + KEEMBAY_GPIO_MODE, pin); + + return 0; +} + +static int keembay_pinconf_get_schmitt(struct keembay_pinctrl *kpc, unsigned int pin) +{ + unsigned int val = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_MODE, pin); + + return !!(val & KEEMBAY_GPIO_MODE_SCHMITT_EN); +} + +static int keembay_pinconf_set_schmitt(struct keembay_pinctrl *kpc, unsigned int pin, + unsigned int schmitt_en) +{ + unsigned int val = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_MODE, pin); + + if (schmitt_en) + val |= KEEMBAY_GPIO_MODE_SCHMITT_EN; + else + val &= ~KEEMBAY_GPIO_MODE_SCHMITT_EN; + + keembay_write_reg(val, kpc->base1 + KEEMBAY_GPIO_MODE, pin); + + return 0; +} + +static int keembay_pinconf_get(struct pinctrl_dev *pctldev, unsigned int pin, + unsigned long *cfg) +{ + struct keembay_pinctrl *kpc = pinctrl_dev_get_drvdata(pctldev); + unsigned int param = pinconf_to_config_param(*cfg); + unsigned int val; + + if (pin >= kpc->npins) + return -EINVAL; + + switch (param) { + case PIN_CONFIG_BIAS_DISABLE: + if (keembay_pinconf_get_pull(kpc, pin) != KEEMBAY_GPIO_DISABLE) + return -EINVAL; + break; + + case PIN_CONFIG_BIAS_PULL_UP: + if (keembay_pinconf_get_pull(kpc, pin) != KEEMBAY_GPIO_PULL_UP) + return -EINVAL; + break; + + case PIN_CONFIG_BIAS_PULL_DOWN: + if (keembay_pinconf_get_pull(kpc, pin) != KEEMBAY_GPIO_PULL_DOWN) + return -EINVAL; + break; + + case PIN_CONFIG_BIAS_BUS_HOLD: + if (keembay_pinconf_get_pull(kpc, pin) != KEEMBAY_GPIO_BUS_HOLD) + return -EINVAL; + break; + + case PIN_CONFIG_INPUT_SCHMITT_ENABLE: + if (!keembay_pinconf_get_schmitt(kpc, pin)) + return -EINVAL; + break; + + case PIN_CONFIG_SLEW_RATE: + val = keembay_pinconf_get_slew_rate(kpc, pin); + *cfg = pinconf_to_config_packed(param, val); + break; + + case PIN_CONFIG_DRIVE_STRENGTH: + val = keembay_pinconf_get_drive(kpc, pin); + *cfg = pinconf_to_config_packed(param, val); + break; + + default: + return -ENOTSUPP; + } + + return 0; +} + +static int keembay_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin, + unsigned long *cfg, unsigned int num_configs) +{ + struct keembay_pinctrl *kpc = pinctrl_dev_get_drvdata(pctldev); + enum pin_config_param param; + unsigned int arg, i; + int ret = 0; + + if (pin >= kpc->npins) + return -EINVAL; + + for (i = 0; i < num_configs; i++) { + param = pinconf_to_config_param(cfg[i]); + arg = pinconf_to_config_argument(cfg[i]); + + switch (param) { + case PIN_CONFIG_BIAS_DISABLE: + ret = keembay_pinconf_set_pull(kpc, pin, KEEMBAY_GPIO_DISABLE); + break; + + case PIN_CONFIG_BIAS_PULL_UP: + ret = keembay_pinconf_set_pull(kpc, pin, KEEMBAY_GPIO_PULL_UP); + break; + + case PIN_CONFIG_BIAS_PULL_DOWN: + ret = keembay_pinconf_set_pull(kpc, pin, KEEMBAY_GPIO_PULL_DOWN); + break; + + case PIN_CONFIG_BIAS_BUS_HOLD: + ret = keembay_pinconf_set_pull(kpc, pin, KEEMBAY_GPIO_BUS_HOLD); + break; + + case PIN_CONFIG_INPUT_SCHMITT_ENABLE: + ret = keembay_pinconf_set_schmitt(kpc, pin, arg); + break; + + case PIN_CONFIG_SLEW_RATE: + ret = keembay_pinconf_set_slew_rate(kpc, pin, arg); + break; + + case PIN_CONFIG_DRIVE_STRENGTH: + ret = keembay_pinconf_set_drive(kpc, pin, arg); + break; + + default: + return -ENOTSUPP; + } + if (ret) + return ret; + } + return ret; +} + +static const struct pinctrl_ops keembay_pctlops = { + .get_groups_count = pinctrl_generic_get_group_count, + .get_group_name = pinctrl_generic_get_group_name, + .get_group_pins = pinctrl_generic_get_group_pins, + .dt_node_to_map = pinconf_generic_dt_node_to_map_all, + .dt_free_map = pinconf_generic_dt_free_map, +}; + +static const struct pinmux_ops keembay_pmxops = { + .get_functions_count = pinmux_generic_get_function_count, + .get_function_name = pinmux_generic_get_function_name, + .get_function_groups = pinmux_generic_get_function_groups, + .gpio_request_enable = keembay_request_gpio, + .set_mux = keembay_set_mux, +}; + +static const struct pinconf_ops keembay_confops = { + .is_generic = true, + .pin_config_get = keembay_pinconf_get, + .pin_config_set = keembay_pinconf_set, +}; + +static struct pinctrl_desc keembay_pinctrl_desc = { + .name = "keembay-pinmux", + .pctlops = &keembay_pctlops, + .pmxops = &keembay_pmxops, + .confops = &keembay_confops, + .owner = THIS_MODULE, +}; + +static int keembay_gpio_get(struct gpio_chip *gc, unsigned int pin) +{ + struct keembay_pinctrl *kpc = gpiochip_get_data(gc); + unsigned int val, offset; + + val = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_MODE, pin); + offset = (val & KEEMBAY_GPIO_MODE_DIR) ? KEEMBAY_GPIO_DATA_IN : KEEMBAY_GPIO_DATA_OUT; + + return keembay_read_pin(kpc->base0 + offset, pin); +} + +static void keembay_gpio_set(struct gpio_chip *gc, unsigned int pin, int val) +{ + struct keembay_pinctrl *kpc = gpiochip_get_data(gc); + unsigned int reg_val; + + reg_val = keembay_read_gpio_reg(kpc->base0 + KEEMBAY_GPIO_DATA_OUT, pin); + if (val) + keembay_write_gpio_reg(reg_val | BIT(pin % KEEMBAY_GPIO_MAX_PER_REG), + kpc->base0 + KEEMBAY_GPIO_DATA_HIGH, pin); + else + keembay_write_gpio_reg(~reg_val | BIT(pin % KEEMBAY_GPIO_MAX_PER_REG), + kpc->base0 + KEEMBAY_GPIO_DATA_LOW, pin); +} + +static int keembay_gpio_get_direction(struct gpio_chip *gc, unsigned int pin) +{ + struct keembay_pinctrl *kpc = gpiochip_get_data(gc); + unsigned int val = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_MODE, pin); + + return !!(val & KEEMBAY_GPIO_MODE_DIR); +} + +static int keembay_gpio_set_direction_in(struct gpio_chip *gc, unsigned int pin) +{ + struct keembay_pinctrl *kpc = gpiochip_get_data(gc); + unsigned int val; + + val = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_MODE, pin); + val |= KEEMBAY_GPIO_MODE_DIR; + keembay_write_reg(val, kpc->base1 + KEEMBAY_GPIO_MODE, pin); + + return 0; +} + +static int keembay_gpio_set_direction_out(struct gpio_chip *gc, + unsigned int pin, int value) +{ + struct keembay_pinctrl *kpc = gpiochip_get_data(gc); + unsigned int val; + + val = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_MODE, pin); + val &= ~KEEMBAY_GPIO_MODE_DIR; + keembay_write_reg(val, kpc->base1 + KEEMBAY_GPIO_MODE, pin); + keembay_gpio_set(gc, pin, value); + + return 0; +} + +static void keembay_gpio_irq_handler(struct irq_desc *desc) +{ + struct gpio_chip *gc = irq_desc_get_handler_data(desc); + unsigned int kmb_irq = irq_desc_get_irq(desc); + unsigned long reg, clump = 0, bit = 0; + struct irq_chip *parent_chip; + struct keembay_pinctrl *kpc; + unsigned int src, pin, val; + + /* Identify GPIO interrupt number from GIC interrupt number */ + for (src = 0; src < KEEMBAY_GPIO_NUM_IRQ; src++) { + if (kmb_irq == gc->irq.parents[src]) + break; + } + + if (src == KEEMBAY_GPIO_NUM_IRQ) + return; + + parent_chip = irq_desc_get_chip(desc); + kpc = gpiochip_get_data(gc); + + chained_irq_enter(parent_chip, desc); + reg = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_INT_CFG, src); + + /* + * Each Interrupt line can be shared by up to 4 GPIO pins. Enable bit + * and input values were checked to identify the source of the + * Interrupt. The checked enable bit positions are 7, 15, 23 and 31. + */ + for_each_set_clump8(bit, clump, ®, BITS_PER_TYPE(typeof(reg))) { + pin = clump & ~KEEMBAY_GPIO_IRQ_ENABLE; + val = keembay_read_pin(kpc->base0 + KEEMBAY_GPIO_DATA_IN, pin); + kmb_irq = irq_linear_revmap(gc->irq.domain, pin); + + /* Checks if the interrupt is enabled */ + if (val && (clump & KEEMBAY_GPIO_IRQ_ENABLE)) + generic_handle_irq(kmb_irq); + } + chained_irq_exit(parent_chip, desc); +} + +static void keembay_gpio_clear_irq(struct irq_data *data, unsigned long pos, + u32 src, irq_hw_number_t pin) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(data); + struct keembay_pinctrl *kpc = gpiochip_get_data(gc); + unsigned long trig = irqd_get_trigger_type(data); + struct keembay_gpio_irq *irq = &kpc->irq[src]; + unsigned long val; + + /* Check if the value of pos/KEEMBAY_GPIO_NUM_IRQ is in valid range. */ + if ((pos / KEEMBAY_GPIO_NUM_IRQ) >= KEEMBAY_GPIO_MAX_PER_IRQ) + return; + + /* Retains val register as it handles other interrupts as well. */ + val = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_INT_CFG, src); + + bitmap_set_value8(&val, 0, pos); + keembay_write_reg(val, kpc->base1 + KEEMBAY_GPIO_INT_CFG, src); + + irq->num_share--; + irq->pins[pos / KEEMBAY_GPIO_NUM_IRQ] = 0; + + if (trig & IRQ_TYPE_LEVEL_MASK) + keembay_gpio_restore_default(kpc, pin); + + if (irq->trigger == IRQ_TYPE_LEVEL_HIGH) + kpc->max_gpios_level_type++; + else if (irq->trigger == IRQ_TYPE_EDGE_RISING) + kpc->max_gpios_edge_type++; +} + +static int keembay_find_free_slot(struct keembay_pinctrl *kpc, unsigned int src) +{ + unsigned long val = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_INT_CFG, src); + + return bitmap_find_free_region(&val, KEEMBAY_GPIO_MAX_PER_REG, 3) / KEEMBAY_GPIO_NUM_IRQ; +} + +static int keembay_find_free_src(struct keembay_pinctrl *kpc, unsigned int trig) +{ + int src, type = 0; + + if (trig & IRQ_TYPE_LEVEL_MASK) + type = IRQ_TYPE_LEVEL_HIGH; + else if (trig & IRQ_TYPE_EDGE_BOTH) + type = IRQ_TYPE_EDGE_RISING; + + for (src = 0; src < KEEMBAY_GPIO_NUM_IRQ; src++) { + if (kpc->irq[src].trigger != type) + continue; + + if (!keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_INT_CFG, src) || + kpc->irq[src].num_share < KEEMBAY_GPIO_MAX_PER_IRQ) + return src; + } + + return -EBUSY; +} + +static void keembay_gpio_set_irq(struct keembay_pinctrl *kpc, int src, + int slot, irq_hw_number_t pin) +{ + unsigned long val = pin | KEEMBAY_GPIO_IRQ_ENABLE; + struct keembay_gpio_irq *irq = &kpc->irq[src]; + unsigned long flags, reg; + + raw_spin_lock_irqsave(&kpc->lock, flags); + reg = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_INT_CFG, src); + bitmap_set_value8(®, val, slot * 8); + keembay_write_reg(reg, kpc->base1 + KEEMBAY_GPIO_INT_CFG, src); + raw_spin_unlock_irqrestore(&kpc->lock, flags); + + if (irq->trigger == IRQ_TYPE_LEVEL_HIGH) + kpc->max_gpios_level_type--; + else if (irq->trigger == IRQ_TYPE_EDGE_RISING) + kpc->max_gpios_edge_type--; + + irq->source = src; + irq->pins[slot] = pin; + irq->num_share++; +} + +static void keembay_gpio_irq_enable(struct irq_data *data) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(data); + struct keembay_pinctrl *kpc = gpiochip_get_data(gc); + unsigned int trig = irqd_get_trigger_type(data); + irq_hw_number_t pin = irqd_to_hwirq(data); + int src, slot; + + /* Check which Interrupt source and slot is available */ + src = keembay_find_free_src(kpc, trig); + slot = keembay_find_free_slot(kpc, src); + + if (src < 0 || slot < 0) + return; + + if (trig & KEEMBAY_GPIO_SENSE_LOW) + keembay_gpio_invert(kpc, pin); + + keembay_gpio_set_irq(kpc, src, slot, pin); +} + +static void keembay_gpio_irq_ack(struct irq_data *data) +{ + /* + * The keembay_gpio_irq_ack function is needed to handle_edge_irq. + * IRQ ack is not possible from the SOC perspective. The IP by itself + * is used for handling interrupts which do not come in short-time and + * not used as protocol or communication interrupts. All the interrupts + * are threaded IRQ interrupts. But this function is expected to be + * present as the gpio IP is registered with irq framework. Otherwise + * handle_edge_irq() fails. + */ +} + +static void keembay_gpio_irq_disable(struct irq_data *data) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(data); + struct keembay_pinctrl *kpc = gpiochip_get_data(gc); + irq_hw_number_t pin = irqd_to_hwirq(data); + unsigned long reg, clump = 0, pos = 0; + unsigned int src; + + for (src = 0; src < KEEMBAY_GPIO_NUM_IRQ; src++) { + reg = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_INT_CFG, src); + for_each_set_clump8(pos, clump, ®, BITS_PER_TYPE(typeof(reg))) { + if ((clump & ~KEEMBAY_GPIO_IRQ_ENABLE) == pin) { + keembay_gpio_clear_irq(data, pos, src, pin); + return; + } + } + } +} + +static int keembay_gpio_irq_set_type(struct irq_data *data, unsigned int type) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(data); + struct keembay_pinctrl *kpc = gpiochip_get_data(gc); + + /* Change EDGE_BOTH as EDGE_RISING in order to claim the IRQ for power button */ + if (!kpc->max_gpios_edge_type && (type & IRQ_TYPE_EDGE_BOTH)) + type = IRQ_TYPE_EDGE_RISING; + + if (!kpc->max_gpios_level_type && (type & IRQ_TYPE_LEVEL_MASK)) + type = IRQ_TYPE_NONE; + + if (type & IRQ_TYPE_EDGE_BOTH) + irq_set_handler_locked(data, handle_edge_irq); + else if (type & IRQ_TYPE_LEVEL_MASK) + irq_set_handler_locked(data, handle_level_irq); + else + return -EINVAL; + + return 0; +} + +static int keembay_gpio_add_pin_ranges(struct gpio_chip *chip) +{ + struct keembay_pinctrl *kpc = gpiochip_get_data(chip); + int ret; + + ret = gpiochip_add_pin_range(chip, dev_name(kpc->dev), 0, 0, chip->ngpio); + if (ret) + dev_err_probe(kpc->dev, ret, "failed to add GPIO pin range\n"); + return ret; +} + +static struct irq_chip keembay_gpio_irqchip = { + .name = "keembay-gpio", + .irq_enable = keembay_gpio_irq_enable, + .irq_disable = keembay_gpio_irq_disable, + .irq_set_type = keembay_gpio_irq_set_type, + .irq_ack = keembay_gpio_irq_ack, +}; + +static int keembay_gpiochip_probe(struct keembay_pinctrl *kpc, + struct platform_device *pdev) +{ + unsigned int i, level_line = 0, edge_line = 0; + struct gpio_chip *gc = &kpc->chip; + struct gpio_irq_chip *girq; + + /* Setup GPIO IRQ chip */ + girq = &kpc->chip.irq; + girq->chip = &keembay_gpio_irqchip; + girq->parent_handler = keembay_gpio_irq_handler; + girq->num_parents = KEEMBAY_GPIO_NUM_IRQ; + girq->parents = devm_kcalloc(kpc->dev, girq->num_parents, + sizeof(*girq->parents), GFP_KERNEL); + + if (!girq->parents) + return -ENOMEM; + + /* Setup GPIO chip */ + gc->label = dev_name(kpc->dev); + gc->parent = kpc->dev; + gc->request = gpiochip_generic_request; + gc->free = gpiochip_generic_free; + gc->get_direction = keembay_gpio_get_direction; + gc->direction_input = keembay_gpio_set_direction_in; + gc->direction_output = keembay_gpio_set_direction_out; + gc->get = keembay_gpio_get; + gc->set = keembay_gpio_set; + gc->set_config = gpiochip_generic_config; + gc->base = -1; + gc->ngpio = kpc->npins; + gc->add_pin_ranges = keembay_gpio_add_pin_ranges; + + for (i = 0; i < KEEMBAY_GPIO_NUM_IRQ; i++) { + struct keembay_gpio_irq *kmb_irq = &kpc->irq[i]; + int irq; + + irq = platform_get_irq_optional(pdev, i); + if (irq <= 0) + continue; + + girq->parents[i] = irq; + kmb_irq->line = girq->parents[i]; + kmb_irq->source = i; + kmb_irq->trigger = irq_get_trigger_type(girq->parents[i]); + kmb_irq->num_share = 0; + + if (kmb_irq->trigger == IRQ_TYPE_LEVEL_HIGH) + level_line++; + else + edge_line++; + } + + kpc->max_gpios_level_type = level_line * KEEMBAY_GPIO_MAX_PER_IRQ; + kpc->max_gpios_edge_type = edge_line * KEEMBAY_GPIO_MAX_PER_IRQ; + + girq->default_type = IRQ_TYPE_NONE; + girq->handler = handle_bad_irq; + + return devm_gpiochip_add_data(kpc->dev, gc, kpc); +} + +static int keembay_build_groups(struct keembay_pinctrl *kpc) +{ + struct group_desc *grp; + unsigned int i; + + kpc->ngroups = kpc->npins; + grp = devm_kcalloc(kpc->dev, kpc->ngroups, sizeof(*grp), GFP_KERNEL); + if (!grp) + return -ENOMEM; + + /* Each pin is categorised as one group */ + for (i = 0; i < kpc->ngroups; i++) { + const struct pinctrl_pin_desc *pdesc = keembay_pins + i; + struct group_desc *kmb_grp = grp + i; + + kmb_grp->name = pdesc->name; + kmb_grp->pins = (int *)&pdesc->number; + pinctrl_generic_add_group(kpc->pctrl, kmb_grp->name, + kmb_grp->pins, 1, NULL); + } + + return 0; +} + +static int keembay_pinctrl_reg(struct keembay_pinctrl *kpc, struct device *dev) +{ + int ret; + + keembay_pinctrl_desc.pins = keembay_pins; + ret = of_property_read_u32(dev->of_node, "ngpios", &kpc->npins); + if (ret < 0) + return ret; + keembay_pinctrl_desc.npins = kpc->npins; + + kpc->pctrl = devm_pinctrl_register(kpc->dev, &keembay_pinctrl_desc, kpc); + + return PTR_ERR_OR_ZERO(kpc->pctrl); +} + +static int keembay_add_functions(struct keembay_pinctrl *kpc, + struct function_desc *functions) +{ + unsigned int i; + + /* Assign the groups for each function */ + for (i = 0; i < kpc->nfuncs; i++) { + struct function_desc *func = &functions[i]; + const char **group_names; + unsigned int grp_idx = 0; + int j; + + group_names = devm_kcalloc(kpc->dev, func->num_group_names, + sizeof(*group_names), GFP_KERNEL); + if (!group_names) + return -ENOMEM; + + for (j = 0; j < kpc->npins; j++) { + const struct pinctrl_pin_desc *pdesc = &keembay_pins[j]; + struct keembay_mux_desc *mux; + + for (mux = pdesc->drv_data; mux->name; mux++) { + if (!strcmp(mux->name, func->name)) + group_names[grp_idx++] = pdesc->name; + } + } + + func->group_names = group_names; + } + + /* Add all functions */ + for (i = 0; i < kpc->nfuncs; i++) { + pinmux_generic_add_function(kpc->pctrl, + functions[i].name, + functions[i].group_names, + functions[i].num_group_names, + functions[i].data); + } + + return 0; +} + +static int keembay_build_functions(struct keembay_pinctrl *kpc) +{ + struct function_desc *keembay_funcs, *new_funcs; + int i; + + /* + * Allocate maximum possible number of functions. Assume every pin + * being part of 8 (hw maximum) globally unique muxes. + */ + kpc->nfuncs = 0; + keembay_funcs = kcalloc(kpc->npins * 8, sizeof(*keembay_funcs), GFP_KERNEL); + if (!keembay_funcs) + return -ENOMEM; + + /* Setup 1 function for each unique mux */ + for (i = 0; i < kpc->npins; i++) { + const struct pinctrl_pin_desc *pdesc = keembay_pins + i; + struct keembay_mux_desc *mux; + + for (mux = pdesc->drv_data; mux->name; mux++) { + struct function_desc *fdesc; + + /* Check if we already have function for this mux */ + for (fdesc = keembay_funcs; fdesc->name; fdesc++) { + if (!strcmp(mux->name, fdesc->name)) { + fdesc->num_group_names++; + break; + } + } + + /* Setup new function for this mux we didn't see before */ + if (!fdesc->name) { + fdesc->name = mux->name; + fdesc->num_group_names = 1; + fdesc->data = &mux->mode; + kpc->nfuncs++; + } + } + } + + /* Reallocate memory based on actual number of functions */ + new_funcs = krealloc(keembay_funcs, kpc->nfuncs * sizeof(*new_funcs), GFP_KERNEL); + if (!new_funcs) { + kfree(keembay_funcs); + return -ENOMEM; + } + + return keembay_add_functions(kpc, new_funcs); +} + +static const struct keembay_pin_soc keembay_data = { + .pins = keembay_pins, +}; + +static const struct of_device_id keembay_pinctrl_match[] = { + { .compatible = "intel,keembay-pinctrl", .data = &keembay_data }, + { } +}; +MODULE_DEVICE_TABLE(of, keembay_pinctrl_match); + +static int keembay_pinctrl_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct keembay_pinctrl *kpc; + int ret; + + kpc = devm_kzalloc(dev, sizeof(*kpc), GFP_KERNEL); + if (!kpc) + return -ENOMEM; + + kpc->dev = dev; + kpc->soc = device_get_match_data(dev); + + kpc->base0 = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(kpc->base0)) + return PTR_ERR(kpc->base0); + + kpc->base1 = devm_platform_ioremap_resource(pdev, 1); + if (IS_ERR(kpc->base1)) + return PTR_ERR(kpc->base1); + + raw_spin_lock_init(&kpc->lock); + + ret = keembay_pinctrl_reg(kpc, dev); + if (ret) + return ret; + + ret = keembay_build_groups(kpc); + if (ret) + return ret; + + ret = keembay_build_functions(kpc); + if (ret) + return ret; + + ret = keembay_gpiochip_probe(kpc, pdev); + if (ret) + return ret; + + platform_set_drvdata(pdev, kpc); + + return 0; +} + +static struct platform_driver keembay_pinctrl_driver = { + .probe = keembay_pinctrl_probe, + .driver = { + .name = "keembay-pinctrl", + .of_match_table = keembay_pinctrl_match, + }, +}; +module_platform_driver(keembay_pinctrl_driver); + +MODULE_AUTHOR("Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>"); +MODULE_AUTHOR("Vijayakannan Ayyathurai <vijayakannan.ayyathurai@intel.com>"); +MODULE_AUTHOR("Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com>"); +MODULE_DESCRIPTION("Intel Keem Bay SoC pinctrl/GPIO driver"); +MODULE_LICENSE("GPL"); |