summaryrefslogtreecommitdiffstats
path: root/drivers/pinctrl/qcom/pinctrl-qdf2xxx.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/pinctrl/qcom/pinctrl-qdf2xxx.c')
-rw-r--r--drivers/pinctrl/qcom/pinctrl-qdf2xxx.c164
1 files changed, 164 insertions, 0 deletions
diff --git a/drivers/pinctrl/qcom/pinctrl-qdf2xxx.c b/drivers/pinctrl/qcom/pinctrl-qdf2xxx.c
new file mode 100644
index 0000000000..b5808fcfb1
--- /dev/null
+++ b/drivers/pinctrl/qcom/pinctrl-qdf2xxx.c
@@ -0,0 +1,164 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * GPIO and pin control functions on this SOC are handled by the "TLMM"
+ * device. The driver which controls this device is pinctrl-msm.c. Each
+ * SOC with a TLMM is expected to create a client driver that registers
+ * with pinctrl-msm.c. This means that all TLMM drivers are pin control
+ * drivers.
+ *
+ * This pin control driver is intended to be used only an ACPI-enabled
+ * system. As such, UEFI will handle all pin control configuration, so
+ * this driver does not provide pin control functions. It is effectively
+ * a GPIO-only driver. The alternative is to duplicate the GPIO code of
+ * pinctrl-msm.c into another driver.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/acpi.h>
+
+#include "pinctrl-msm.h"
+
+/* A maximum of 256 allows us to use a u8 array to hold the GPIO numbers */
+#define MAX_GPIOS 256
+
+/* maximum size of each gpio name (enough room for "gpioXXX" + null) */
+#define NAME_SIZE 8
+
+static int qdf2xxx_pinctrl_probe(struct platform_device *pdev)
+{
+ struct msm_pinctrl_soc_data *pinctrl;
+ struct pinctrl_pin_desc *pins;
+ struct msm_pingroup *groups;
+ char (*names)[NAME_SIZE];
+ unsigned int i;
+ u32 num_gpios;
+ unsigned int avail_gpios; /* The number of GPIOs we support */
+ u8 gpios[MAX_GPIOS]; /* An array of supported GPIOs */
+ int ret;
+
+ /* Query the number of GPIOs from ACPI */
+ ret = device_property_read_u32(&pdev->dev, "num-gpios", &num_gpios);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "missing 'num-gpios' property\n");
+ return ret;
+ }
+ if (!num_gpios || num_gpios > MAX_GPIOS) {
+ dev_err(&pdev->dev, "invalid 'num-gpios' property\n");
+ return -ENODEV;
+ }
+
+ /* The number of GPIOs in the approved list */
+ ret = device_property_count_u8(&pdev->dev, "gpios");
+ if (ret < 0) {
+ dev_err(&pdev->dev, "missing 'gpios' property\n");
+ return ret;
+ }
+ /*
+ * The number of available GPIOs should be non-zero, and no
+ * more than the total number of GPIOS.
+ */
+ if (!ret || ret > num_gpios) {
+ dev_err(&pdev->dev, "invalid 'gpios' property\n");
+ return -ENODEV;
+ }
+ avail_gpios = ret;
+
+ ret = device_property_read_u8_array(&pdev->dev, "gpios", gpios,
+ avail_gpios);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "could not read list of GPIOs\n");
+ return ret;
+ }
+
+ pinctrl = devm_kzalloc(&pdev->dev, sizeof(*pinctrl), GFP_KERNEL);
+ pins = devm_kcalloc(&pdev->dev, num_gpios,
+ sizeof(struct pinctrl_pin_desc), GFP_KERNEL);
+ groups = devm_kcalloc(&pdev->dev, num_gpios,
+ sizeof(struct msm_pingroup), GFP_KERNEL);
+ names = devm_kcalloc(&pdev->dev, avail_gpios, NAME_SIZE, GFP_KERNEL);
+
+ if (!pinctrl || !pins || !groups || !names)
+ return -ENOMEM;
+
+ /*
+ * Initialize the array. GPIOs not listed in the 'gpios' array
+ * still need a number, but nothing else.
+ */
+ for (i = 0; i < num_gpios; i++) {
+ pins[i].number = i;
+ groups[i].grp.pins = &pins[i].number;
+ }
+
+ /* Populate the entries that are meant to be exposed as GPIOs. */
+ for (i = 0; i < avail_gpios; i++) {
+ unsigned int gpio = gpios[i];
+
+ groups[gpio].grp.npins = 1;
+ snprintf(names[i], NAME_SIZE, "gpio%u", gpio);
+ pins[gpio].name = names[i];
+ groups[gpio].grp.name = names[i];
+
+ groups[gpio].ctl_reg = 0x10000 * gpio;
+ groups[gpio].io_reg = 0x04 + 0x10000 * gpio;
+ groups[gpio].intr_cfg_reg = 0x08 + 0x10000 * gpio;
+ groups[gpio].intr_status_reg = 0x0c + 0x10000 * gpio;
+ groups[gpio].intr_target_reg = 0x08 + 0x10000 * gpio;
+
+ groups[gpio].mux_bit = 2;
+ groups[gpio].pull_bit = 0;
+ groups[gpio].drv_bit = 6;
+ groups[gpio].oe_bit = 9;
+ groups[gpio].in_bit = 0;
+ groups[gpio].out_bit = 1;
+ groups[gpio].intr_enable_bit = 0;
+ groups[gpio].intr_status_bit = 0;
+ groups[gpio].intr_target_bit = 5;
+ groups[gpio].intr_target_kpss_val = 1;
+ groups[gpio].intr_raw_status_bit = 4;
+ groups[gpio].intr_polarity_bit = 1;
+ groups[gpio].intr_detection_bit = 2;
+ groups[gpio].intr_detection_width = 2;
+ }
+
+ pinctrl->pins = pins;
+ pinctrl->groups = groups;
+ pinctrl->npins = num_gpios;
+ pinctrl->ngroups = num_gpios;
+ pinctrl->ngpios = num_gpios;
+
+ return msm_pinctrl_probe(pdev, pinctrl);
+}
+
+static const struct acpi_device_id qdf2xxx_acpi_ids[] = {
+ {"QCOM8002"},
+ {},
+};
+MODULE_DEVICE_TABLE(acpi, qdf2xxx_acpi_ids);
+
+static struct platform_driver qdf2xxx_pinctrl_driver = {
+ .driver = {
+ .name = "qdf2xxx-pinctrl",
+ .acpi_match_table = qdf2xxx_acpi_ids,
+ },
+ .probe = qdf2xxx_pinctrl_probe,
+ .remove = msm_pinctrl_remove,
+};
+
+static int __init qdf2xxx_pinctrl_init(void)
+{
+ return platform_driver_register(&qdf2xxx_pinctrl_driver);
+}
+arch_initcall(qdf2xxx_pinctrl_init);
+
+static void __exit qdf2xxx_pinctrl_exit(void)
+{
+ platform_driver_unregister(&qdf2xxx_pinctrl_driver);
+}
+module_exit(qdf2xxx_pinctrl_exit);
+
+MODULE_DESCRIPTION("Qualcomm Technologies QDF2xxx pin control driver");
+MODULE_LICENSE("GPL v2");