summaryrefslogtreecommitdiffstats
path: root/drivers/pinctrl/samsung/pinctrl-s3c64xx.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/pinctrl/samsung/pinctrl-s3c64xx.c')
-rw-r--r--drivers/pinctrl/samsung/pinctrl-s3c64xx.c806
1 files changed, 806 insertions, 0 deletions
diff --git a/drivers/pinctrl/samsung/pinctrl-s3c64xx.c b/drivers/pinctrl/samsung/pinctrl-s3c64xx.c
new file mode 100644
index 000000000..c5d92db4f
--- /dev/null
+++ b/drivers/pinctrl/samsung/pinctrl-s3c64xx.c
@@ -0,0 +1,806 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// S3C64xx specific support for pinctrl-samsung driver.
+//
+// Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
+//
+// Based on pinctrl-exynos.c, please see the file for original copyrights.
+//
+// This file contains the Samsung S3C64xx specific information required by the
+// the Samsung pinctrl/gpiolib driver. It also includes the implementation of
+// external gpio and wakeup interrupt support.
+
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/irqdomain.h>
+#include <linux/irq.h>
+#include <linux/of_irq.h>
+#include <linux/io.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+
+#include "pinctrl-samsung.h"
+
+#define NUM_EINT0 28
+#define NUM_EINT0_IRQ 4
+#define EINT_MAX_PER_REG 16
+#define EINT_MAX_PER_GROUP 16
+
+/* External GPIO and wakeup interrupt related definitions */
+#define SVC_GROUP_SHIFT 4
+#define SVC_GROUP_MASK 0xf
+#define SVC_NUM_MASK 0xf
+#define SVC_GROUP(x) ((x >> SVC_GROUP_SHIFT) & \
+ SVC_GROUP_MASK)
+
+#define EINT12CON_REG 0x200
+#define EINT12MASK_REG 0x240
+#define EINT12PEND_REG 0x260
+
+#define EINT_OFFS(i) ((i) % (2 * EINT_MAX_PER_GROUP))
+#define EINT_GROUP(i) ((i) / EINT_MAX_PER_GROUP)
+#define EINT_REG(g) (4 * ((g) / 2))
+
+#define EINTCON_REG(i) (EINT12CON_REG + EINT_REG(EINT_GROUP(i)))
+#define EINTMASK_REG(i) (EINT12MASK_REG + EINT_REG(EINT_GROUP(i)))
+#define EINTPEND_REG(i) (EINT12PEND_REG + EINT_REG(EINT_GROUP(i)))
+
+#define SERVICE_REG 0x284
+#define SERVICEPEND_REG 0x288
+
+#define EINT0CON0_REG 0x900
+#define EINT0MASK_REG 0x920
+#define EINT0PEND_REG 0x924
+
+/* S3C64xx specific external interrupt trigger types */
+#define EINT_LEVEL_LOW 0
+#define EINT_LEVEL_HIGH 1
+#define EINT_EDGE_FALLING 2
+#define EINT_EDGE_RISING 4
+#define EINT_EDGE_BOTH 6
+#define EINT_CON_MASK 0xF
+#define EINT_CON_LEN 4
+
+static const struct samsung_pin_bank_type bank_type_4bit_off = {
+ .fld_width = { 4, 1, 2, 0, 2, 2, },
+ .reg_offset = { 0x00, 0x04, 0x08, 0, 0x0c, 0x10, },
+};
+
+static const struct samsung_pin_bank_type bank_type_4bit_alive = {
+ .fld_width = { 4, 1, 2, },
+ .reg_offset = { 0x00, 0x04, 0x08, },
+};
+
+static const struct samsung_pin_bank_type bank_type_4bit2_off = {
+ .fld_width = { 4, 1, 2, 0, 2, 2, },
+ .reg_offset = { 0x00, 0x08, 0x0c, 0, 0x10, 0x14, },
+};
+
+static const struct samsung_pin_bank_type bank_type_4bit2_alive = {
+ .fld_width = { 4, 1, 2, },
+ .reg_offset = { 0x00, 0x08, 0x0c, },
+};
+
+static const struct samsung_pin_bank_type bank_type_2bit_off = {
+ .fld_width = { 2, 1, 2, 0, 2, 2, },
+ .reg_offset = { 0x00, 0x04, 0x08, 0, 0x0c, 0x10, },
+};
+
+static const struct samsung_pin_bank_type bank_type_2bit_alive = {
+ .fld_width = { 2, 1, 2, },
+ .reg_offset = { 0x00, 0x04, 0x08, },
+};
+
+#define PIN_BANK_4BIT(pins, reg, id) \
+ { \
+ .type = &bank_type_4bit_off, \
+ .pctl_offset = reg, \
+ .nr_pins = pins, \
+ .eint_type = EINT_TYPE_NONE, \
+ .name = id \
+ }
+
+#define PIN_BANK_4BIT_EINTG(pins, reg, id, eoffs) \
+ { \
+ .type = &bank_type_4bit_off, \
+ .pctl_offset = reg, \
+ .nr_pins = pins, \
+ .eint_type = EINT_TYPE_GPIO, \
+ .eint_func = 7, \
+ .eint_mask = (1 << (pins)) - 1, \
+ .eint_offset = eoffs, \
+ .name = id \
+ }
+
+#define PIN_BANK_4BIT_EINTW(pins, reg, id, eoffs, emask) \
+ { \
+ .type = &bank_type_4bit_alive,\
+ .pctl_offset = reg, \
+ .nr_pins = pins, \
+ .eint_type = EINT_TYPE_WKUP, \
+ .eint_func = 3, \
+ .eint_mask = emask, \
+ .eint_offset = eoffs, \
+ .name = id \
+ }
+
+#define PIN_BANK_4BIT2_EINTG(pins, reg, id, eoffs) \
+ { \
+ .type = &bank_type_4bit2_off, \
+ .pctl_offset = reg, \
+ .nr_pins = pins, \
+ .eint_type = EINT_TYPE_GPIO, \
+ .eint_func = 7, \
+ .eint_mask = (1 << (pins)) - 1, \
+ .eint_offset = eoffs, \
+ .name = id \
+ }
+
+#define PIN_BANK_4BIT2_EINTW(pins, reg, id, eoffs, emask) \
+ { \
+ .type = &bank_type_4bit2_alive,\
+ .pctl_offset = reg, \
+ .nr_pins = pins, \
+ .eint_type = EINT_TYPE_WKUP, \
+ .eint_func = 3, \
+ .eint_mask = emask, \
+ .eint_offset = eoffs, \
+ .name = id \
+ }
+
+#define PIN_BANK_4BIT2_ALIVE(pins, reg, id) \
+ { \
+ .type = &bank_type_4bit2_alive,\
+ .pctl_offset = reg, \
+ .nr_pins = pins, \
+ .eint_type = EINT_TYPE_NONE, \
+ .name = id \
+ }
+
+#define PIN_BANK_2BIT(pins, reg, id) \
+ { \
+ .type = &bank_type_2bit_off, \
+ .pctl_offset = reg, \
+ .nr_pins = pins, \
+ .eint_type = EINT_TYPE_NONE, \
+ .name = id \
+ }
+
+#define PIN_BANK_2BIT_EINTG(pins, reg, id, eoffs, emask) \
+ { \
+ .type = &bank_type_2bit_off, \
+ .pctl_offset = reg, \
+ .nr_pins = pins, \
+ .eint_type = EINT_TYPE_GPIO, \
+ .eint_func = 3, \
+ .eint_mask = emask, \
+ .eint_offset = eoffs, \
+ .name = id \
+ }
+
+#define PIN_BANK_2BIT_EINTW(pins, reg, id, eoffs) \
+ { \
+ .type = &bank_type_2bit_alive,\
+ .pctl_offset = reg, \
+ .nr_pins = pins, \
+ .eint_type = EINT_TYPE_WKUP, \
+ .eint_func = 2, \
+ .eint_mask = (1 << (pins)) - 1, \
+ .eint_offset = eoffs, \
+ .name = id \
+ }
+
+/**
+ * struct s3c64xx_eint0_data - EINT0 common data
+ * @drvdata: pin controller driver data
+ * @domains: IRQ domains of particular EINT0 interrupts
+ * @pins: pin offsets inside of banks of particular EINT0 interrupts
+ */
+struct s3c64xx_eint0_data {
+ struct samsung_pinctrl_drv_data *drvdata;
+ struct irq_domain *domains[NUM_EINT0];
+ u8 pins[NUM_EINT0];
+};
+
+/**
+ * struct s3c64xx_eint0_domain_data - EINT0 per-domain data
+ * @bank: pin bank related to the domain
+ * @eints: EINT0 interrupts related to the domain
+ */
+struct s3c64xx_eint0_domain_data {
+ struct samsung_pin_bank *bank;
+ u8 eints[];
+};
+
+/**
+ * struct s3c64xx_eint_gpio_data - GPIO EINT data
+ * @drvdata: pin controller driver data
+ * @domains: array of domains related to EINT interrupt groups
+ */
+struct s3c64xx_eint_gpio_data {
+ struct samsung_pinctrl_drv_data *drvdata;
+ struct irq_domain *domains[];
+};
+
+/*
+ * Common functions for S3C64xx EINT configuration
+ */
+
+static int s3c64xx_irq_get_trigger(unsigned int type)
+{
+ int trigger;
+
+ switch (type) {
+ case IRQ_TYPE_EDGE_RISING:
+ trigger = EINT_EDGE_RISING;
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ trigger = EINT_EDGE_FALLING;
+ break;
+ case IRQ_TYPE_EDGE_BOTH:
+ trigger = EINT_EDGE_BOTH;
+ break;
+ case IRQ_TYPE_LEVEL_HIGH:
+ trigger = EINT_LEVEL_HIGH;
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ trigger = EINT_LEVEL_LOW;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return trigger;
+}
+
+static void s3c64xx_irq_set_handler(struct irq_data *d, unsigned int type)
+{
+ /* Edge- and level-triggered interrupts need different handlers */
+ if (type & IRQ_TYPE_EDGE_BOTH)
+ irq_set_handler_locked(d, handle_edge_irq);
+ else
+ irq_set_handler_locked(d, handle_level_irq);
+}
+
+static void s3c64xx_irq_set_function(struct samsung_pinctrl_drv_data *d,
+ struct samsung_pin_bank *bank, int pin)
+{
+ const struct samsung_pin_bank_type *bank_type = bank->type;
+ unsigned long flags;
+ void __iomem *reg;
+ u8 shift;
+ u32 mask;
+ u32 val;
+
+ /* Make sure that pin is configured as interrupt */
+ reg = d->virt_base + bank->pctl_offset;
+ shift = pin;
+ if (bank_type->fld_width[PINCFG_TYPE_FUNC] * shift >= 32) {
+ /* 4-bit bank type with 2 con regs */
+ reg += 4;
+ shift -= 8;
+ }
+
+ shift = shift * bank_type->fld_width[PINCFG_TYPE_FUNC];
+ mask = (1 << bank_type->fld_width[PINCFG_TYPE_FUNC]) - 1;
+
+ raw_spin_lock_irqsave(&bank->slock, flags);
+
+ val = readl(reg);
+ val &= ~(mask << shift);
+ val |= bank->eint_func << shift;
+ writel(val, reg);
+
+ raw_spin_unlock_irqrestore(&bank->slock, flags);
+}
+
+/*
+ * Functions for EINT GPIO configuration (EINT groups 1-9)
+ */
+
+static inline void s3c64xx_gpio_irq_set_mask(struct irq_data *irqd, bool mask)
+{
+ struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd);
+ struct samsung_pinctrl_drv_data *d = bank->drvdata;
+ unsigned char index = EINT_OFFS(bank->eint_offset) + irqd->hwirq;
+ void __iomem *reg = d->virt_base + EINTMASK_REG(bank->eint_offset);
+ u32 val;
+
+ val = readl(reg);
+ if (mask)
+ val |= 1 << index;
+ else
+ val &= ~(1 << index);
+ writel(val, reg);
+}
+
+static void s3c64xx_gpio_irq_unmask(struct irq_data *irqd)
+{
+ s3c64xx_gpio_irq_set_mask(irqd, false);
+}
+
+static void s3c64xx_gpio_irq_mask(struct irq_data *irqd)
+{
+ s3c64xx_gpio_irq_set_mask(irqd, true);
+}
+
+static void s3c64xx_gpio_irq_ack(struct irq_data *irqd)
+{
+ struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd);
+ struct samsung_pinctrl_drv_data *d = bank->drvdata;
+ unsigned char index = EINT_OFFS(bank->eint_offset) + irqd->hwirq;
+ void __iomem *reg = d->virt_base + EINTPEND_REG(bank->eint_offset);
+
+ writel(1 << index, reg);
+}
+
+static int s3c64xx_gpio_irq_set_type(struct irq_data *irqd, unsigned int type)
+{
+ struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd);
+ struct samsung_pinctrl_drv_data *d = bank->drvdata;
+ void __iomem *reg;
+ int trigger;
+ u8 shift;
+ u32 val;
+
+ trigger = s3c64xx_irq_get_trigger(type);
+ if (trigger < 0) {
+ pr_err("unsupported external interrupt type\n");
+ return -EINVAL;
+ }
+
+ s3c64xx_irq_set_handler(irqd, type);
+
+ /* Set up interrupt trigger */
+ reg = d->virt_base + EINTCON_REG(bank->eint_offset);
+ shift = EINT_OFFS(bank->eint_offset) + irqd->hwirq;
+ shift = 4 * (shift / 4); /* 4 EINTs per trigger selector */
+
+ val = readl(reg);
+ val &= ~(EINT_CON_MASK << shift);
+ val |= trigger << shift;
+ writel(val, reg);
+
+ s3c64xx_irq_set_function(d, bank, irqd->hwirq);
+
+ return 0;
+}
+
+/*
+ * irq_chip for gpio interrupts.
+ */
+static struct irq_chip s3c64xx_gpio_irq_chip = {
+ .name = "GPIO",
+ .irq_unmask = s3c64xx_gpio_irq_unmask,
+ .irq_mask = s3c64xx_gpio_irq_mask,
+ .irq_ack = s3c64xx_gpio_irq_ack,
+ .irq_set_type = s3c64xx_gpio_irq_set_type,
+};
+
+static int s3c64xx_gpio_irq_map(struct irq_domain *h, unsigned int virq,
+ irq_hw_number_t hw)
+{
+ struct samsung_pin_bank *bank = h->host_data;
+
+ if (!(bank->eint_mask & (1 << hw)))
+ return -EINVAL;
+
+ irq_set_chip_and_handler(virq,
+ &s3c64xx_gpio_irq_chip, handle_level_irq);
+ irq_set_chip_data(virq, bank);
+
+ return 0;
+}
+
+/*
+ * irq domain callbacks for external gpio interrupt controller.
+ */
+static const struct irq_domain_ops s3c64xx_gpio_irqd_ops = {
+ .map = s3c64xx_gpio_irq_map,
+ .xlate = irq_domain_xlate_twocell,
+};
+
+static void s3c64xx_eint_gpio_irq(struct irq_desc *desc)
+{
+ struct irq_chip *chip = irq_desc_get_chip(desc);
+ struct s3c64xx_eint_gpio_data *data = irq_desc_get_handler_data(desc);
+ struct samsung_pinctrl_drv_data *drvdata = data->drvdata;
+
+ chained_irq_enter(chip, desc);
+
+ do {
+ unsigned int svc;
+ unsigned int group;
+ unsigned int pin;
+ int ret;
+
+ svc = readl(drvdata->virt_base + SERVICE_REG);
+ group = SVC_GROUP(svc);
+ pin = svc & SVC_NUM_MASK;
+
+ if (!group)
+ break;
+
+ /* Group 1 is used for two pin banks */
+ if (group == 1) {
+ if (pin < 8)
+ group = 0;
+ else
+ pin -= 8;
+ }
+
+ ret = generic_handle_domain_irq(data->domains[group], pin);
+ /*
+ * Something must be really wrong if an unmapped EINT
+ * was unmasked...
+ */
+ BUG_ON(ret);
+ } while (1);
+
+ chained_irq_exit(chip, desc);
+}
+
+/**
+ * s3c64xx_eint_gpio_init() - setup handling of external gpio interrupts.
+ * @d: driver data of samsung pinctrl driver.
+ */
+static int s3c64xx_eint_gpio_init(struct samsung_pinctrl_drv_data *d)
+{
+ struct s3c64xx_eint_gpio_data *data;
+ struct samsung_pin_bank *bank;
+ struct device *dev = d->dev;
+ unsigned int nr_domains;
+ unsigned int i;
+
+ if (!d->irq) {
+ dev_err(dev, "irq number not available\n");
+ return -EINVAL;
+ }
+
+ nr_domains = 0;
+ bank = d->pin_banks;
+ for (i = 0; i < d->nr_banks; ++i, ++bank) {
+ unsigned int nr_eints;
+ unsigned int mask;
+
+ if (bank->eint_type != EINT_TYPE_GPIO)
+ continue;
+
+ mask = bank->eint_mask;
+ nr_eints = fls(mask);
+
+ bank->irq_domain = irq_domain_create_linear(bank->fwnode,
+ nr_eints, &s3c64xx_gpio_irqd_ops, bank);
+ if (!bank->irq_domain) {
+ dev_err(dev, "gpio irq domain add failed\n");
+ return -ENXIO;
+ }
+
+ ++nr_domains;
+ }
+
+ data = devm_kzalloc(dev, struct_size(data, domains, nr_domains),
+ GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+ data->drvdata = d;
+
+ bank = d->pin_banks;
+ nr_domains = 0;
+ for (i = 0; i < d->nr_banks; ++i, ++bank) {
+ if (bank->eint_type != EINT_TYPE_GPIO)
+ continue;
+
+ data->domains[nr_domains++] = bank->irq_domain;
+ }
+
+ irq_set_chained_handler_and_data(d->irq, s3c64xx_eint_gpio_irq, data);
+
+ return 0;
+}
+
+/*
+ * Functions for configuration of EINT0 wake-up interrupts
+ */
+
+static inline void s3c64xx_eint0_irq_set_mask(struct irq_data *irqd, bool mask)
+{
+ struct s3c64xx_eint0_domain_data *ddata =
+ irq_data_get_irq_chip_data(irqd);
+ struct samsung_pinctrl_drv_data *d = ddata->bank->drvdata;
+ u32 val;
+
+ val = readl(d->virt_base + EINT0MASK_REG);
+ if (mask)
+ val |= 1 << ddata->eints[irqd->hwirq];
+ else
+ val &= ~(1 << ddata->eints[irqd->hwirq]);
+ writel(val, d->virt_base + EINT0MASK_REG);
+}
+
+static void s3c64xx_eint0_irq_unmask(struct irq_data *irqd)
+{
+ s3c64xx_eint0_irq_set_mask(irqd, false);
+}
+
+static void s3c64xx_eint0_irq_mask(struct irq_data *irqd)
+{
+ s3c64xx_eint0_irq_set_mask(irqd, true);
+}
+
+static void s3c64xx_eint0_irq_ack(struct irq_data *irqd)
+{
+ struct s3c64xx_eint0_domain_data *ddata =
+ irq_data_get_irq_chip_data(irqd);
+ struct samsung_pinctrl_drv_data *d = ddata->bank->drvdata;
+
+ writel(1 << ddata->eints[irqd->hwirq],
+ d->virt_base + EINT0PEND_REG);
+}
+
+static int s3c64xx_eint0_irq_set_type(struct irq_data *irqd, unsigned int type)
+{
+ struct s3c64xx_eint0_domain_data *ddata =
+ irq_data_get_irq_chip_data(irqd);
+ struct samsung_pin_bank *bank = ddata->bank;
+ struct samsung_pinctrl_drv_data *d = bank->drvdata;
+ void __iomem *reg;
+ int trigger;
+ u8 shift;
+ u32 val;
+
+ trigger = s3c64xx_irq_get_trigger(type);
+ if (trigger < 0) {
+ pr_err("unsupported external interrupt type\n");
+ return -EINVAL;
+ }
+
+ s3c64xx_irq_set_handler(irqd, type);
+
+ /* Set up interrupt trigger */
+ reg = d->virt_base + EINT0CON0_REG;
+ shift = ddata->eints[irqd->hwirq];
+ if (shift >= EINT_MAX_PER_REG) {
+ reg += 4;
+ shift -= EINT_MAX_PER_REG;
+ }
+ shift = EINT_CON_LEN * (shift / 2);
+
+ val = readl(reg);
+ val &= ~(EINT_CON_MASK << shift);
+ val |= trigger << shift;
+ writel(val, reg);
+
+ s3c64xx_irq_set_function(d, bank, irqd->hwirq);
+
+ return 0;
+}
+
+/*
+ * irq_chip for wakeup interrupts
+ */
+static struct irq_chip s3c64xx_eint0_irq_chip = {
+ .name = "EINT0",
+ .irq_unmask = s3c64xx_eint0_irq_unmask,
+ .irq_mask = s3c64xx_eint0_irq_mask,
+ .irq_ack = s3c64xx_eint0_irq_ack,
+ .irq_set_type = s3c64xx_eint0_irq_set_type,
+};
+
+static inline void s3c64xx_irq_demux_eint(struct irq_desc *desc, u32 range)
+{
+ struct irq_chip *chip = irq_desc_get_chip(desc);
+ struct s3c64xx_eint0_data *data = irq_desc_get_handler_data(desc);
+ struct samsung_pinctrl_drv_data *drvdata = data->drvdata;
+ unsigned int pend, mask;
+
+ chained_irq_enter(chip, desc);
+
+ pend = readl(drvdata->virt_base + EINT0PEND_REG);
+ mask = readl(drvdata->virt_base + EINT0MASK_REG);
+
+ pend = pend & range & ~mask;
+ pend &= range;
+
+ while (pend) {
+ unsigned int irq;
+ int ret;
+
+ irq = fls(pend) - 1;
+ pend &= ~(1 << irq);
+ ret = generic_handle_domain_irq(data->domains[irq], data->pins[irq]);
+ /*
+ * Something must be really wrong if an unmapped EINT
+ * was unmasked...
+ */
+ BUG_ON(ret);
+ }
+
+ chained_irq_exit(chip, desc);
+}
+
+static void s3c64xx_demux_eint0_3(struct irq_desc *desc)
+{
+ s3c64xx_irq_demux_eint(desc, 0xf);
+}
+
+static void s3c64xx_demux_eint4_11(struct irq_desc *desc)
+{
+ s3c64xx_irq_demux_eint(desc, 0xff0);
+}
+
+static void s3c64xx_demux_eint12_19(struct irq_desc *desc)
+{
+ s3c64xx_irq_demux_eint(desc, 0xff000);
+}
+
+static void s3c64xx_demux_eint20_27(struct irq_desc *desc)
+{
+ s3c64xx_irq_demux_eint(desc, 0xff00000);
+}
+
+static irq_flow_handler_t s3c64xx_eint0_handlers[NUM_EINT0_IRQ] = {
+ s3c64xx_demux_eint0_3,
+ s3c64xx_demux_eint4_11,
+ s3c64xx_demux_eint12_19,
+ s3c64xx_demux_eint20_27,
+};
+
+static int s3c64xx_eint0_irq_map(struct irq_domain *h, unsigned int virq,
+ irq_hw_number_t hw)
+{
+ struct s3c64xx_eint0_domain_data *ddata = h->host_data;
+ struct samsung_pin_bank *bank = ddata->bank;
+
+ if (!(bank->eint_mask & (1 << hw)))
+ return -EINVAL;
+
+ irq_set_chip_and_handler(virq,
+ &s3c64xx_eint0_irq_chip, handle_level_irq);
+ irq_set_chip_data(virq, ddata);
+
+ return 0;
+}
+
+/*
+ * irq domain callbacks for external wakeup interrupt controller.
+ */
+static const struct irq_domain_ops s3c64xx_eint0_irqd_ops = {
+ .map = s3c64xx_eint0_irq_map,
+ .xlate = irq_domain_xlate_twocell,
+};
+
+/* list of external wakeup controllers supported */
+static const struct of_device_id s3c64xx_eint0_irq_ids[] = {
+ { .compatible = "samsung,s3c64xx-wakeup-eint", },
+ { }
+};
+
+/**
+ * s3c64xx_eint_eint0_init() - setup handling of external wakeup interrupts.
+ * @d: driver data of samsung pinctrl driver.
+ */
+static int s3c64xx_eint_eint0_init(struct samsung_pinctrl_drv_data *d)
+{
+ struct device *dev = d->dev;
+ struct device_node *eint0_np = NULL;
+ struct device_node *np;
+ struct samsung_pin_bank *bank;
+ struct s3c64xx_eint0_data *data;
+ unsigned int i;
+
+ for_each_child_of_node(dev->of_node, np) {
+ if (of_match_node(s3c64xx_eint0_irq_ids, np)) {
+ eint0_np = np;
+ break;
+ }
+ }
+ if (!eint0_np)
+ return -ENODEV;
+
+ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+ if (!data) {
+ of_node_put(eint0_np);
+ return -ENOMEM;
+ }
+ data->drvdata = d;
+
+ for (i = 0; i < NUM_EINT0_IRQ; ++i) {
+ unsigned int irq;
+
+ irq = irq_of_parse_and_map(eint0_np, i);
+ if (!irq) {
+ dev_err(dev, "failed to get wakeup EINT IRQ %d\n", i);
+ of_node_put(eint0_np);
+ return -ENXIO;
+ }
+
+ irq_set_chained_handler_and_data(irq,
+ s3c64xx_eint0_handlers[i],
+ data);
+ }
+ of_node_put(eint0_np);
+
+ bank = d->pin_banks;
+ for (i = 0; i < d->nr_banks; ++i, ++bank) {
+ struct s3c64xx_eint0_domain_data *ddata;
+ unsigned int nr_eints;
+ unsigned int mask;
+ unsigned int irq;
+ unsigned int pin;
+
+ if (bank->eint_type != EINT_TYPE_WKUP)
+ continue;
+
+ mask = bank->eint_mask;
+ nr_eints = fls(mask);
+
+ ddata = devm_kzalloc(dev,
+ sizeof(*ddata) + nr_eints, GFP_KERNEL);
+ if (!ddata)
+ return -ENOMEM;
+ ddata->bank = bank;
+
+ bank->irq_domain = irq_domain_create_linear(bank->fwnode,
+ nr_eints, &s3c64xx_eint0_irqd_ops, ddata);
+ if (!bank->irq_domain) {
+ dev_err(dev, "wkup irq domain add failed\n");
+ return -ENXIO;
+ }
+
+ irq = bank->eint_offset;
+ mask = bank->eint_mask;
+ for (pin = 0; mask; ++pin, mask >>= 1) {
+ if (!(mask & 1))
+ continue;
+ data->domains[irq] = bank->irq_domain;
+ data->pins[irq] = pin;
+ ddata->eints[pin] = irq;
+ ++irq;
+ }
+ }
+
+ return 0;
+}
+
+/* pin banks of s3c64xx pin-controller 0 */
+static const struct samsung_pin_bank_data s3c64xx_pin_banks0[] __initconst = {
+ PIN_BANK_4BIT_EINTG(8, 0x000, "gpa", 0),
+ PIN_BANK_4BIT_EINTG(7, 0x020, "gpb", 8),
+ PIN_BANK_4BIT_EINTG(8, 0x040, "gpc", 16),
+ PIN_BANK_4BIT_EINTG(5, 0x060, "gpd", 32),
+ PIN_BANK_4BIT(5, 0x080, "gpe"),
+ PIN_BANK_2BIT_EINTG(16, 0x0a0, "gpf", 48, 0x3fff),
+ PIN_BANK_4BIT_EINTG(7, 0x0c0, "gpg", 64),
+ PIN_BANK_4BIT2_EINTG(10, 0x0e0, "gph", 80),
+ PIN_BANK_2BIT(16, 0x100, "gpi"),
+ PIN_BANK_2BIT(12, 0x120, "gpj"),
+ PIN_BANK_4BIT2_ALIVE(16, 0x800, "gpk"),
+ PIN_BANK_4BIT2_EINTW(15, 0x810, "gpl", 16, 0x7f00),
+ PIN_BANK_4BIT_EINTW(6, 0x820, "gpm", 23, 0x1f),
+ PIN_BANK_2BIT_EINTW(16, 0x830, "gpn", 0),
+ PIN_BANK_2BIT_EINTG(16, 0x140, "gpo", 96, 0xffff),
+ PIN_BANK_2BIT_EINTG(15, 0x160, "gpp", 112, 0x7fff),
+ PIN_BANK_2BIT_EINTG(9, 0x180, "gpq", 128, 0x1ff),
+};
+
+/*
+ * Samsung pinctrl driver data for S3C64xx SoC. S3C64xx SoC includes
+ * one gpio/pin-mux/pinconfig controller.
+ */
+static const struct samsung_pin_ctrl s3c64xx_pin_ctrl[] __initconst = {
+ {
+ /* pin-controller instance 1 data */
+ .pin_banks = s3c64xx_pin_banks0,
+ .nr_banks = ARRAY_SIZE(s3c64xx_pin_banks0),
+ .eint_gpio_init = s3c64xx_eint_gpio_init,
+ .eint_wkup_init = s3c64xx_eint_eint0_init,
+ },
+};
+
+const struct samsung_pinctrl_of_match_data s3c64xx_of_data __initconst = {
+ .ctrl = s3c64xx_pin_ctrl,
+ .num_ctrl = ARRAY_SIZE(s3c64xx_pin_ctrl),
+};