summaryrefslogtreecommitdiffstats
path: root/drivers/pinctrl/tegra/pinctrl-tegra.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/pinctrl/tegra/pinctrl-tegra.h')
-rw-r--r--drivers/pinctrl/tegra/pinctrl-tegra.h209
1 files changed, 209 insertions, 0 deletions
diff --git a/drivers/pinctrl/tegra/pinctrl-tegra.h b/drivers/pinctrl/tegra/pinctrl-tegra.h
new file mode 100644
index 0000000000..b3289bdf72
--- /dev/null
+++ b/drivers/pinctrl/tegra/pinctrl-tegra.h
@@ -0,0 +1,209 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Driver for the NVIDIA Tegra pinmux
+ *
+ * Copyright (c) 2011, NVIDIA CORPORATION. All rights reserved.
+ */
+
+#ifndef __PINMUX_TEGRA_H__
+#define __PINMUX_TEGRA_H__
+
+struct tegra_pmx {
+ struct device *dev;
+ struct pinctrl_dev *pctl;
+
+ const struct tegra_pinctrl_soc_data *soc;
+ struct tegra_function *functions;
+ const char **group_pins;
+
+ struct pinctrl_gpio_range gpio_range;
+ struct pinctrl_desc desc;
+ int nbanks;
+ void __iomem **regs;
+ u32 *backup_regs;
+};
+
+enum tegra_pinconf_param {
+ /* argument: tegra_pinconf_pull */
+ TEGRA_PINCONF_PARAM_PULL,
+ /* argument: tegra_pinconf_tristate */
+ TEGRA_PINCONF_PARAM_TRISTATE,
+ /* argument: Boolean */
+ TEGRA_PINCONF_PARAM_ENABLE_INPUT,
+ /* argument: Boolean */
+ TEGRA_PINCONF_PARAM_OPEN_DRAIN,
+ /* argument: Boolean */
+ TEGRA_PINCONF_PARAM_LOCK,
+ /* argument: Boolean */
+ TEGRA_PINCONF_PARAM_IORESET,
+ /* argument: Boolean */
+ TEGRA_PINCONF_PARAM_RCV_SEL,
+ /* argument: Boolean */
+ TEGRA_PINCONF_PARAM_HIGH_SPEED_MODE,
+ /* argument: Boolean */
+ TEGRA_PINCONF_PARAM_SCHMITT,
+ /* argument: Boolean */
+ TEGRA_PINCONF_PARAM_LOW_POWER_MODE,
+ /* argument: Integer, range is HW-dependant */
+ TEGRA_PINCONF_PARAM_DRIVE_DOWN_STRENGTH,
+ /* argument: Integer, range is HW-dependant */
+ TEGRA_PINCONF_PARAM_DRIVE_UP_STRENGTH,
+ /* argument: Integer, range is HW-dependant */
+ TEGRA_PINCONF_PARAM_SLEW_RATE_FALLING,
+ /* argument: Integer, range is HW-dependant */
+ TEGRA_PINCONF_PARAM_SLEW_RATE_RISING,
+ /* argument: Integer, range is HW-dependant */
+ TEGRA_PINCONF_PARAM_DRIVE_TYPE,
+};
+
+enum tegra_pinconf_pull {
+ TEGRA_PINCONFIG_PULL_NONE,
+ TEGRA_PINCONFIG_PULL_DOWN,
+ TEGRA_PINCONFIG_PULL_UP,
+};
+
+enum tegra_pinconf_tristate {
+ TEGRA_PINCONFIG_DRIVEN,
+ TEGRA_PINCONFIG_TRISTATE,
+};
+
+#define TEGRA_PINCONF_PACK(_param_, _arg_) ((_param_) << 16 | (_arg_))
+#define TEGRA_PINCONF_UNPACK_PARAM(_conf_) ((_conf_) >> 16)
+#define TEGRA_PINCONF_UNPACK_ARG(_conf_) ((_conf_) & 0xffff)
+
+/**
+ * struct tegra_function - Tegra pinctrl mux function
+ * @name: The name of the function, exported to pinctrl core.
+ * @groups: An array of pin groups that may select this function.
+ * @ngroups: The number of entries in @groups.
+ */
+struct tegra_function {
+ const char *name;
+ const char **groups;
+ unsigned ngroups;
+};
+
+/**
+ * struct tegra_pingroup - Tegra pin group
+ * @name The name of the pin group.
+ * @pins An array of pin IDs included in this pin group.
+ * @npins The number of entries in @pins.
+ * @funcs The mux functions which can be muxed onto this group.
+ * @mux_reg: Mux register offset.
+ * This register contains the mux, einput, odrain, lock,
+ * ioreset, rcv_sel parameters.
+ * @mux_bank: Mux register bank.
+ * @mux_bit: Mux register bit.
+ * @pupd_reg: Pull-up/down register offset.
+ * @pupd_bank: Pull-up/down register bank.
+ * @pupd_bit: Pull-up/down register bit.
+ * @tri_reg: Tri-state register offset.
+ * @tri_bank: Tri-state register bank.
+ * @tri_bit: Tri-state register bit.
+ * @einput_bit: Enable-input register bit.
+ * @odrain_bit: Open-drain register bit.
+ * @lock_bit: Lock register bit.
+ * @ioreset_bit: IO reset register bit.
+ * @rcv_sel_bit: Receiver select bit.
+ * @drv_reg: Drive fields register offset.
+ * This register contains hsm, schmitt, lpmd, drvdn,
+ * drvup, slwr, slwf, and drvtype parameters.
+ * @drv_bank: Drive fields register bank.
+ * @hsm_bit: High Speed Mode register bit.
+ * @sfsel_bit: GPIO/SFIO selection register bit.
+ * @schmitt_bit: Schmitt register bit.
+ * @lpmd_bit: Low Power Mode register bit.
+ * @drvdn_bit: Drive Down register bit.
+ * @drvdn_width: Drive Down field width.
+ * @drvup_bit: Drive Up register bit.
+ * @drvup_width: Drive Up field width.
+ * @slwr_bit: Slew Rising register bit.
+ * @slwr_width: Slew Rising field width.
+ * @slwf_bit: Slew Falling register bit.
+ * @slwf_width: Slew Falling field width.
+ * @lpdr_bit: Base driver enabling bit.
+ * @drvtype_bit: Drive type register bit.
+ * @parked_bitmask: Parked register mask. 0 if unsupported.
+ *
+ * -1 in a *_reg field means that feature is unsupported for this group.
+ * *_bank and *_reg values are irrelevant when *_reg is -1.
+ * When *_reg is valid, *_bit may be -1 to indicate an unsupported feature.
+ *
+ * A representation of a group of pins (possibly just one pin) in the Tegra
+ * pin controller. Each group allows some parameter or parameters to be
+ * configured. The most common is mux function selection. Many others exist
+ * such as pull-up/down, tri-state, etc. Tegra's pin controller is complex;
+ * certain groups may only support configuring certain parameters, hence
+ * each parameter is optional.
+ */
+struct tegra_pingroup {
+ const char *name;
+ const unsigned *pins;
+ u8 npins;
+ u8 funcs[4];
+ s32 mux_reg;
+ s32 pupd_reg;
+ s32 tri_reg;
+ s32 drv_reg;
+ u32 mux_bank:2;
+ u32 pupd_bank:2;
+ u32 tri_bank:2;
+ u32 drv_bank:2;
+ s32 mux_bit:6;
+ s32 pupd_bit:6;
+ s32 tri_bit:6;
+ s32 einput_bit:6;
+ s32 odrain_bit:6;
+ s32 lock_bit:6;
+ s32 ioreset_bit:6;
+ s32 rcv_sel_bit:6;
+ s32 hsm_bit:6;
+ s32 sfsel_bit:6;
+ s32 schmitt_bit:6;
+ s32 lpmd_bit:6;
+ s32 drvdn_bit:6;
+ s32 drvup_bit:6;
+ s32 slwr_bit:6;
+ s32 slwf_bit:6;
+ s32 lpdr_bit:6;
+ s32 drvtype_bit:6;
+ s32 drvdn_width:6;
+ s32 drvup_width:6;
+ s32 slwr_width:6;
+ s32 slwf_width:6;
+ u32 parked_bitmask;
+};
+
+/**
+ * struct tegra_pinctrl_soc_data - Tegra pin controller driver configuration
+ * @ngpios: The number of GPIO pins the pin controller HW affects.
+ * @pins: An array describing all pins the pin controller affects.
+ * All pins which are also GPIOs must be listed first within the
+ * array, and be numbered identically to the GPIO controller's
+ * numbering.
+ * @npins: The numbmer of entries in @pins.
+ * @functions: An array describing all mux functions the SoC supports.
+ * @nfunctions: The numbmer of entries in @functions.
+ * @groups: An array describing all pin groups the pin SoC supports.
+ * @ngroups: The numbmer of entries in @groups.
+ */
+struct tegra_pinctrl_soc_data {
+ unsigned ngpios;
+ const char *gpio_compatible;
+ const struct pinctrl_pin_desc *pins;
+ unsigned npins;
+ const char * const *functions;
+ unsigned nfunctions;
+ const struct tegra_pingroup *groups;
+ unsigned ngroups;
+ bool hsm_in_mux;
+ bool schmitt_in_mux;
+ bool drvtype_in_mux;
+ bool sfsel_in_mux;
+};
+
+extern const struct dev_pm_ops tegra_pinctrl_pm;
+
+int tegra_pinctrl_probe(struct platform_device *pdev,
+ const struct tegra_pinctrl_soc_data *soc_data);
+#endif