diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/platform/x86/samsung-laptop.c | 1658 |
1 files changed, 1658 insertions, 0 deletions
diff --git a/drivers/platform/x86/samsung-laptop.c b/drivers/platform/x86/samsung-laptop.c new file mode 100644 index 0000000000..b4aa8ba35d --- /dev/null +++ b/drivers/platform/x86/samsung-laptop.c @@ -0,0 +1,1658 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Samsung Laptop driver + * + * Copyright (C) 2009,2011 Greg Kroah-Hartman (gregkh@suse.de) + * Copyright (C) 2009,2011 Novell Inc. + */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/pci.h> +#include <linux/backlight.h> +#include <linux/leds.h> +#include <linux/fb.h> +#include <linux/dmi.h> +#include <linux/platform_device.h> +#include <linux/rfkill.h> +#include <linux/acpi.h> +#include <linux/seq_file.h> +#include <linux/debugfs.h> +#include <linux/ctype.h> +#include <linux/efi.h> +#include <linux/suspend.h> +#include <acpi/video.h> + +/* + * This driver is needed because a number of Samsung laptops do not hook + * their control settings through ACPI. So we have to poke around in the + * BIOS to do things like brightness values, and "special" key controls. + */ + +/* + * We have 0 - 8 as valid brightness levels. The specs say that level 0 should + * be reserved by the BIOS (which really doesn't make much sense), we tell + * userspace that the value is 0 - 7 and then just tell the hardware 1 - 8 + */ +#define MAX_BRIGHT 0x07 + + +#define SABI_IFACE_MAIN 0x00 +#define SABI_IFACE_SUB 0x02 +#define SABI_IFACE_COMPLETE 0x04 +#define SABI_IFACE_DATA 0x05 + +#define WL_STATUS_WLAN 0x0 +#define WL_STATUS_BT 0x2 + +/* Structure get/set data using sabi */ +struct sabi_data { + union { + struct { + u32 d0; + u32 d1; + u16 d2; + u8 d3; + }; + u8 data[11]; + }; +}; + +struct sabi_header_offsets { + u8 port; + u8 re_mem; + u8 iface_func; + u8 en_mem; + u8 data_offset; + u8 data_segment; +}; + +struct sabi_commands { + /* + * Brightness is 0 - 8, as described above. + * Value 0 is for the BIOS to use + */ + u16 get_brightness; + u16 set_brightness; + + /* + * first byte: + * 0x00 - wireless is off + * 0x01 - wireless is on + * second byte: + * 0x02 - 3G is off + * 0x03 - 3G is on + * TODO, verify 3G is correct, that doesn't seem right... + */ + u16 get_wireless_button; + u16 set_wireless_button; + + /* 0 is off, 1 is on */ + u16 get_backlight; + u16 set_backlight; + + /* + * 0x80 or 0x00 - no action + * 0x81 - recovery key pressed + */ + u16 get_recovery_mode; + u16 set_recovery_mode; + + /* + * on seclinux: 0 is low, 1 is high, + * on swsmi: 0 is normal, 1 is silent, 2 is turbo + */ + u16 get_performance_level; + u16 set_performance_level; + + /* 0x80 is off, 0x81 is on */ + u16 get_battery_life_extender; + u16 set_battery_life_extender; + + /* 0x80 is off, 0x81 is on */ + u16 get_usb_charge; + u16 set_usb_charge; + + /* the first byte is for bluetooth and the third one is for wlan */ + u16 get_wireless_status; + u16 set_wireless_status; + + /* 0x80 is off, 0x81 is on */ + u16 get_lid_handling; + u16 set_lid_handling; + + /* 0x81 to read, (0x82 | level << 8) to set, 0xaabb to enable */ + u16 kbd_backlight; + + /* + * Tell the BIOS that Linux is running on this machine. + * 81 is on, 80 is off + */ + u16 set_linux; +}; + +struct sabi_performance_level { + const char *name; + u16 value; +}; + +struct sabi_config { + int sabi_version; + const char *test_string; + u16 main_function; + const struct sabi_header_offsets header_offsets; + const struct sabi_commands commands; + const struct sabi_performance_level performance_levels[4]; + u8 min_brightness; + u8 max_brightness; +}; + +static const struct sabi_config sabi_configs[] = { + { + /* I don't know if it is really 2, but it is + * less than 3 anyway */ + .sabi_version = 2, + + .test_string = "SECLINUX", + + .main_function = 0x4c49, + + .header_offsets = { + .port = 0x00, + .re_mem = 0x02, + .iface_func = 0x03, + .en_mem = 0x04, + .data_offset = 0x05, + .data_segment = 0x07, + }, + + .commands = { + .get_brightness = 0x00, + .set_brightness = 0x01, + + .get_wireless_button = 0x02, + .set_wireless_button = 0x03, + + .get_backlight = 0x04, + .set_backlight = 0x05, + + .get_recovery_mode = 0x06, + .set_recovery_mode = 0x07, + + .get_performance_level = 0x08, + .set_performance_level = 0x09, + + .get_battery_life_extender = 0xFFFF, + .set_battery_life_extender = 0xFFFF, + + .get_usb_charge = 0xFFFF, + .set_usb_charge = 0xFFFF, + + .get_wireless_status = 0xFFFF, + .set_wireless_status = 0xFFFF, + + .get_lid_handling = 0xFFFF, + .set_lid_handling = 0xFFFF, + + .kbd_backlight = 0xFFFF, + + .set_linux = 0x0a, + }, + + .performance_levels = { + { + .name = "silent", + .value = 0, + }, + { + .name = "normal", + .value = 1, + }, + { }, + }, + .min_brightness = 1, + .max_brightness = 8, + }, + { + .sabi_version = 3, + + .test_string = "SwSmi@", + + .main_function = 0x5843, + + .header_offsets = { + .port = 0x00, + .re_mem = 0x04, + .iface_func = 0x02, + .en_mem = 0x03, + .data_offset = 0x05, + .data_segment = 0x07, + }, + + .commands = { + .get_brightness = 0x10, + .set_brightness = 0x11, + + .get_wireless_button = 0x12, + .set_wireless_button = 0x13, + + .get_backlight = 0x2d, + .set_backlight = 0x2e, + + .get_recovery_mode = 0xff, + .set_recovery_mode = 0xff, + + .get_performance_level = 0x31, + .set_performance_level = 0x32, + + .get_battery_life_extender = 0x65, + .set_battery_life_extender = 0x66, + + .get_usb_charge = 0x67, + .set_usb_charge = 0x68, + + .get_wireless_status = 0x69, + .set_wireless_status = 0x6a, + + .get_lid_handling = 0x6d, + .set_lid_handling = 0x6e, + + .kbd_backlight = 0x78, + + .set_linux = 0xff, + }, + + .performance_levels = { + { + .name = "normal", + .value = 0, + }, + { + .name = "silent", + .value = 1, + }, + { + .name = "overclock", + .value = 2, + }, + { }, + }, + .min_brightness = 0, + .max_brightness = 8, + }, + { }, +}; + +/* + * samsung-laptop/ - debugfs root directory + * f0000_segment - dump f0000 segment + * command - current command + * data - current data + * d0, d1, d2, d3 - data fields + * call - call SABI using command and data + * + * This allow to call arbitrary sabi commands wihout + * modifying the driver at all. + * For example, setting the keyboard backlight brightness to 5 + * + * echo 0x78 > command + * echo 0x0582 > d0 + * echo 0 > d1 + * echo 0 > d2 + * echo 0 > d3 + * cat call + */ + +struct samsung_laptop_debug { + struct dentry *root; + struct sabi_data data; + u16 command; + + struct debugfs_blob_wrapper f0000_wrapper; + struct debugfs_blob_wrapper data_wrapper; + struct debugfs_blob_wrapper sdiag_wrapper; +}; + +struct samsung_laptop; + +struct samsung_rfkill { + struct samsung_laptop *samsung; + struct rfkill *rfkill; + enum rfkill_type type; +}; + +struct samsung_laptop { + const struct sabi_config *config; + + void __iomem *sabi; + void __iomem *sabi_iface; + void __iomem *f0000_segment; + + struct mutex sabi_mutex; + + struct platform_device *platform_device; + struct backlight_device *backlight_device; + + struct samsung_rfkill wlan; + struct samsung_rfkill bluetooth; + + struct led_classdev kbd_led; + int kbd_led_wk; + struct workqueue_struct *led_workqueue; + struct work_struct kbd_led_work; + + struct samsung_laptop_debug debug; + struct samsung_quirks *quirks; + + struct notifier_block pm_nb; + + bool handle_backlight; + bool has_stepping_quirk; + + char sdiag[64]; +}; + +struct samsung_quirks { + bool four_kbd_backlight_levels; + bool enable_kbd_backlight; + bool lid_handling; +}; + +static struct samsung_quirks samsung_unknown = {}; + +static struct samsung_quirks samsung_np740u3e = { + .four_kbd_backlight_levels = true, + .enable_kbd_backlight = true, +}; + +static struct samsung_quirks samsung_lid_handling = { + .lid_handling = true, +}; + +static bool force; +module_param(force, bool, 0); +MODULE_PARM_DESC(force, + "Disable the DMI check and forces the driver to be loaded"); + +static bool debug; +module_param(debug, bool, 0644); +MODULE_PARM_DESC(debug, "Debug enabled or not"); + +static int sabi_command(struct samsung_laptop *samsung, u16 command, + struct sabi_data *in, + struct sabi_data *out) +{ + const struct sabi_config *config = samsung->config; + int ret = 0; + u16 port = readw(samsung->sabi + config->header_offsets.port); + u8 complete, iface_data; + + mutex_lock(&samsung->sabi_mutex); + + if (debug) { + if (in) + pr_info("SABI command:0x%04x " + "data:{0x%08x, 0x%08x, 0x%04x, 0x%02x}", + command, in->d0, in->d1, in->d2, in->d3); + else + pr_info("SABI command:0x%04x", command); + } + + /* enable memory to be able to write to it */ + outb(readb(samsung->sabi + config->header_offsets.en_mem), port); + + /* write out the command */ + writew(config->main_function, samsung->sabi_iface + SABI_IFACE_MAIN); + writew(command, samsung->sabi_iface + SABI_IFACE_SUB); + writeb(0, samsung->sabi_iface + SABI_IFACE_COMPLETE); + if (in) { + writel(in->d0, samsung->sabi_iface + SABI_IFACE_DATA); + writel(in->d1, samsung->sabi_iface + SABI_IFACE_DATA + 4); + writew(in->d2, samsung->sabi_iface + SABI_IFACE_DATA + 8); + writeb(in->d3, samsung->sabi_iface + SABI_IFACE_DATA + 10); + } + outb(readb(samsung->sabi + config->header_offsets.iface_func), port); + + /* write protect memory to make it safe */ + outb(readb(samsung->sabi + config->header_offsets.re_mem), port); + + /* see if the command actually succeeded */ + complete = readb(samsung->sabi_iface + SABI_IFACE_COMPLETE); + iface_data = readb(samsung->sabi_iface + SABI_IFACE_DATA); + + /* iface_data = 0xFF happens when a command is not known + * so we only add a warning in debug mode since we will + * probably issue some unknown command at startup to find + * out which features are supported */ + if (complete != 0xaa || (iface_data == 0xff && debug)) + pr_warn("SABI command 0x%04x failed with" + " completion flag 0x%02x and interface data 0x%02x", + command, complete, iface_data); + + if (complete != 0xaa || iface_data == 0xff) { + ret = -EINVAL; + goto exit; + } + + if (out) { + out->d0 = readl(samsung->sabi_iface + SABI_IFACE_DATA); + out->d1 = readl(samsung->sabi_iface + SABI_IFACE_DATA + 4); + out->d2 = readw(samsung->sabi_iface + SABI_IFACE_DATA + 2); + out->d3 = readb(samsung->sabi_iface + SABI_IFACE_DATA + 1); + } + + if (debug && out) { + pr_info("SABI return data:{0x%08x, 0x%08x, 0x%04x, 0x%02x}", + out->d0, out->d1, out->d2, out->d3); + } + +exit: + mutex_unlock(&samsung->sabi_mutex); + return ret; +} + +/* simple wrappers usable with most commands */ +static int sabi_set_commandb(struct samsung_laptop *samsung, + u16 command, u8 data) +{ + struct sabi_data in = { { { .d0 = 0, .d1 = 0, .d2 = 0, .d3 = 0 } } }; + + in.data[0] = data; + return sabi_command(samsung, command, &in, NULL); +} + +static int read_brightness(struct samsung_laptop *samsung) +{ + const struct sabi_config *config = samsung->config; + const struct sabi_commands *commands = &samsung->config->commands; + struct sabi_data sretval; + int user_brightness = 0; + int retval; + + retval = sabi_command(samsung, commands->get_brightness, + NULL, &sretval); + if (retval) + return retval; + + user_brightness = sretval.data[0]; + if (user_brightness > config->min_brightness) + user_brightness -= config->min_brightness; + else + user_brightness = 0; + + return user_brightness; +} + +static void set_brightness(struct samsung_laptop *samsung, u8 user_brightness) +{ + const struct sabi_config *config = samsung->config; + const struct sabi_commands *commands = &samsung->config->commands; + u8 user_level = user_brightness + config->min_brightness; + + if (samsung->has_stepping_quirk && user_level != 0) { + /* + * short circuit if the specified level is what's already set + * to prevent the screen from flickering needlessly + */ + if (user_brightness == read_brightness(samsung)) + return; + + sabi_set_commandb(samsung, commands->set_brightness, 0); + } + + sabi_set_commandb(samsung, commands->set_brightness, user_level); +} + +static int get_brightness(struct backlight_device *bd) +{ + struct samsung_laptop *samsung = bl_get_data(bd); + + return read_brightness(samsung); +} + +static void check_for_stepping_quirk(struct samsung_laptop *samsung) +{ + int initial_level; + int check_level; + int orig_level = read_brightness(samsung); + + /* + * Some laptops exhibit the strange behaviour of stepping toward + * (rather than setting) the brightness except when changing to/from + * brightness level 0. This behaviour is checked for here and worked + * around in set_brightness. + */ + + if (orig_level == 0) + set_brightness(samsung, 1); + + initial_level = read_brightness(samsung); + + if (initial_level <= 2) + check_level = initial_level + 2; + else + check_level = initial_level - 2; + + samsung->has_stepping_quirk = false; + set_brightness(samsung, check_level); + + if (read_brightness(samsung) != check_level) { + samsung->has_stepping_quirk = true; + pr_info("enabled workaround for brightness stepping quirk\n"); + } + + set_brightness(samsung, orig_level); +} + +static int update_status(struct backlight_device *bd) +{ + struct samsung_laptop *samsung = bl_get_data(bd); + const struct sabi_commands *commands = &samsung->config->commands; + + set_brightness(samsung, bd->props.brightness); + + if (bd->props.power == FB_BLANK_UNBLANK) + sabi_set_commandb(samsung, commands->set_backlight, 1); + else + sabi_set_commandb(samsung, commands->set_backlight, 0); + + return 0; +} + +static const struct backlight_ops backlight_ops = { + .get_brightness = get_brightness, + .update_status = update_status, +}; + +static int seclinux_rfkill_set(void *data, bool blocked) +{ + struct samsung_rfkill *srfkill = data; + struct samsung_laptop *samsung = srfkill->samsung; + const struct sabi_commands *commands = &samsung->config->commands; + + return sabi_set_commandb(samsung, commands->set_wireless_button, + !blocked); +} + +static const struct rfkill_ops seclinux_rfkill_ops = { + .set_block = seclinux_rfkill_set, +}; + +static int swsmi_wireless_status(struct samsung_laptop *samsung, + struct sabi_data *data) +{ + const struct sabi_commands *commands = &samsung->config->commands; + + return sabi_command(samsung, commands->get_wireless_status, + NULL, data); +} + +static int swsmi_rfkill_set(void *priv, bool blocked) +{ + struct samsung_rfkill *srfkill = priv; + struct samsung_laptop *samsung = srfkill->samsung; + const struct sabi_commands *commands = &samsung->config->commands; + struct sabi_data data; + int ret, i; + + ret = swsmi_wireless_status(samsung, &data); + if (ret) + return ret; + + /* Don't set the state for non-present devices */ + for (i = 0; i < 4; i++) + if (data.data[i] == 0x02) + data.data[1] = 0; + + if (srfkill->type == RFKILL_TYPE_WLAN) + data.data[WL_STATUS_WLAN] = !blocked; + else if (srfkill->type == RFKILL_TYPE_BLUETOOTH) + data.data[WL_STATUS_BT] = !blocked; + + return sabi_command(samsung, commands->set_wireless_status, + &data, &data); +} + +static void swsmi_rfkill_query(struct rfkill *rfkill, void *priv) +{ + struct samsung_rfkill *srfkill = priv; + struct samsung_laptop *samsung = srfkill->samsung; + struct sabi_data data; + int ret; + + ret = swsmi_wireless_status(samsung, &data); + if (ret) + return ; + + if (srfkill->type == RFKILL_TYPE_WLAN) + ret = data.data[WL_STATUS_WLAN]; + else if (srfkill->type == RFKILL_TYPE_BLUETOOTH) + ret = data.data[WL_STATUS_BT]; + else + return ; + + rfkill_set_sw_state(rfkill, !ret); +} + +static const struct rfkill_ops swsmi_rfkill_ops = { + .set_block = swsmi_rfkill_set, + .query = swsmi_rfkill_query, +}; + +static ssize_t get_performance_level(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct samsung_laptop *samsung = dev_get_drvdata(dev); + const struct sabi_config *config = samsung->config; + const struct sabi_commands *commands = &config->commands; + struct sabi_data sretval; + int retval; + int i; + + /* Read the state */ + retval = sabi_command(samsung, commands->get_performance_level, + NULL, &sretval); + if (retval) + return retval; + + /* The logic is backwards, yeah, lots of fun... */ + for (i = 0; config->performance_levels[i].name; ++i) { + if (sretval.data[0] == config->performance_levels[i].value) + return sprintf(buf, "%s\n", config->performance_levels[i].name); + } + return sprintf(buf, "%s\n", "unknown"); +} + +static ssize_t set_performance_level(struct device *dev, + struct device_attribute *attr, const char *buf, + size_t count) +{ + struct samsung_laptop *samsung = dev_get_drvdata(dev); + const struct sabi_config *config = samsung->config; + const struct sabi_commands *commands = &config->commands; + int i; + + if (count < 1) + return count; + + for (i = 0; config->performance_levels[i].name; ++i) { + const struct sabi_performance_level *level = + &config->performance_levels[i]; + if (!strncasecmp(level->name, buf, strlen(level->name))) { + sabi_set_commandb(samsung, + commands->set_performance_level, + level->value); + break; + } + } + + if (!config->performance_levels[i].name) + return -EINVAL; + + return count; +} + +static DEVICE_ATTR(performance_level, 0644, + get_performance_level, set_performance_level); + +static int read_battery_life_extender(struct samsung_laptop *samsung) +{ + const struct sabi_commands *commands = &samsung->config->commands; + struct sabi_data data; + int retval; + + if (commands->get_battery_life_extender == 0xFFFF) + return -ENODEV; + + memset(&data, 0, sizeof(data)); + data.data[0] = 0x80; + retval = sabi_command(samsung, commands->get_battery_life_extender, + &data, &data); + + if (retval) + return retval; + + if (data.data[0] != 0 && data.data[0] != 1) + return -ENODEV; + + return data.data[0]; +} + +static int write_battery_life_extender(struct samsung_laptop *samsung, + int enabled) +{ + const struct sabi_commands *commands = &samsung->config->commands; + struct sabi_data data; + + memset(&data, 0, sizeof(data)); + data.data[0] = 0x80 | enabled; + return sabi_command(samsung, commands->set_battery_life_extender, + &data, NULL); +} + +static ssize_t get_battery_life_extender(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct samsung_laptop *samsung = dev_get_drvdata(dev); + int ret; + + ret = read_battery_life_extender(samsung); + if (ret < 0) + return ret; + + return sprintf(buf, "%d\n", ret); +} + +static ssize_t set_battery_life_extender(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct samsung_laptop *samsung = dev_get_drvdata(dev); + int ret, value; + + if (!count || kstrtoint(buf, 0, &value) != 0) + return -EINVAL; + + ret = write_battery_life_extender(samsung, !!value); + if (ret < 0) + return ret; + + return count; +} + +static DEVICE_ATTR(battery_life_extender, 0644, + get_battery_life_extender, set_battery_life_extender); + +static int read_usb_charge(struct samsung_laptop *samsung) +{ + const struct sabi_commands *commands = &samsung->config->commands; + struct sabi_data data; + int retval; + + if (commands->get_usb_charge == 0xFFFF) + return -ENODEV; + + memset(&data, 0, sizeof(data)); + data.data[0] = 0x80; + retval = sabi_command(samsung, commands->get_usb_charge, + &data, &data); + + if (retval) + return retval; + + if (data.data[0] != 0 && data.data[0] != 1) + return -ENODEV; + + return data.data[0]; +} + +static int write_usb_charge(struct samsung_laptop *samsung, + int enabled) +{ + const struct sabi_commands *commands = &samsung->config->commands; + struct sabi_data data; + + memset(&data, 0, sizeof(data)); + data.data[0] = 0x80 | enabled; + return sabi_command(samsung, commands->set_usb_charge, + &data, NULL); +} + +static ssize_t get_usb_charge(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct samsung_laptop *samsung = dev_get_drvdata(dev); + int ret; + + ret = read_usb_charge(samsung); + if (ret < 0) + return ret; + + return sprintf(buf, "%d\n", ret); +} + +static ssize_t set_usb_charge(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct samsung_laptop *samsung = dev_get_drvdata(dev); + int ret, value; + + if (!count || kstrtoint(buf, 0, &value) != 0) + return -EINVAL; + + ret = write_usb_charge(samsung, !!value); + if (ret < 0) + return ret; + + return count; +} + +static DEVICE_ATTR(usb_charge, 0644, + get_usb_charge, set_usb_charge); + +static int read_lid_handling(struct samsung_laptop *samsung) +{ + const struct sabi_commands *commands = &samsung->config->commands; + struct sabi_data data; + int retval; + + if (commands->get_lid_handling == 0xFFFF) + return -ENODEV; + + memset(&data, 0, sizeof(data)); + retval = sabi_command(samsung, commands->get_lid_handling, + &data, &data); + + if (retval) + return retval; + + return data.data[0] & 0x1; +} + +static int write_lid_handling(struct samsung_laptop *samsung, + int enabled) +{ + const struct sabi_commands *commands = &samsung->config->commands; + struct sabi_data data; + + memset(&data, 0, sizeof(data)); + data.data[0] = 0x80 | enabled; + return sabi_command(samsung, commands->set_lid_handling, + &data, NULL); +} + +static ssize_t get_lid_handling(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct samsung_laptop *samsung = dev_get_drvdata(dev); + int ret; + + ret = read_lid_handling(samsung); + if (ret < 0) + return ret; + + return sprintf(buf, "%d\n", ret); +} + +static ssize_t set_lid_handling(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct samsung_laptop *samsung = dev_get_drvdata(dev); + int ret, value; + + if (!count || kstrtoint(buf, 0, &value) != 0) + return -EINVAL; + + ret = write_lid_handling(samsung, !!value); + if (ret < 0) + return ret; + + return count; +} + +static DEVICE_ATTR(lid_handling, 0644, + get_lid_handling, set_lid_handling); + +static struct attribute *platform_attributes[] = { + &dev_attr_performance_level.attr, + &dev_attr_battery_life_extender.attr, + &dev_attr_usb_charge.attr, + &dev_attr_lid_handling.attr, + NULL +}; + +static int find_signature(void __iomem *memcheck, const char *testStr) +{ + int i = 0; + int loca; + + for (loca = 0; loca < 0xffff; loca++) { + char temp = readb(memcheck + loca); + + if (temp == testStr[i]) { + if (i == strlen(testStr)-1) + break; + ++i; + } else { + i = 0; + } + } + return loca; +} + +static void samsung_rfkill_exit(struct samsung_laptop *samsung) +{ + if (samsung->wlan.rfkill) { + rfkill_unregister(samsung->wlan.rfkill); + rfkill_destroy(samsung->wlan.rfkill); + samsung->wlan.rfkill = NULL; + } + if (samsung->bluetooth.rfkill) { + rfkill_unregister(samsung->bluetooth.rfkill); + rfkill_destroy(samsung->bluetooth.rfkill); + samsung->bluetooth.rfkill = NULL; + } +} + +static int samsung_new_rfkill(struct samsung_laptop *samsung, + struct samsung_rfkill *arfkill, + const char *name, enum rfkill_type type, + const struct rfkill_ops *ops, + int blocked) +{ + struct rfkill **rfkill = &arfkill->rfkill; + int ret; + + arfkill->type = type; + arfkill->samsung = samsung; + + *rfkill = rfkill_alloc(name, &samsung->platform_device->dev, + type, ops, arfkill); + + if (!*rfkill) + return -EINVAL; + + if (blocked != -1) + rfkill_init_sw_state(*rfkill, blocked); + + ret = rfkill_register(*rfkill); + if (ret) { + rfkill_destroy(*rfkill); + *rfkill = NULL; + return ret; + } + return 0; +} + +static int __init samsung_rfkill_init_seclinux(struct samsung_laptop *samsung) +{ + return samsung_new_rfkill(samsung, &samsung->wlan, "samsung-wlan", + RFKILL_TYPE_WLAN, &seclinux_rfkill_ops, -1); +} + +static int __init samsung_rfkill_init_swsmi(struct samsung_laptop *samsung) +{ + struct sabi_data data; + int ret; + + ret = swsmi_wireless_status(samsung, &data); + if (ret) { + /* Some swsmi laptops use the old seclinux way to control + * wireless devices */ + if (ret == -EINVAL) + ret = samsung_rfkill_init_seclinux(samsung); + return ret; + } + + /* 0x02 seems to mean that the device is no present/available */ + + if (data.data[WL_STATUS_WLAN] != 0x02) + ret = samsung_new_rfkill(samsung, &samsung->wlan, + "samsung-wlan", + RFKILL_TYPE_WLAN, + &swsmi_rfkill_ops, + !data.data[WL_STATUS_WLAN]); + if (ret) + goto exit; + + if (data.data[WL_STATUS_BT] != 0x02) + ret = samsung_new_rfkill(samsung, &samsung->bluetooth, + "samsung-bluetooth", + RFKILL_TYPE_BLUETOOTH, + &swsmi_rfkill_ops, + !data.data[WL_STATUS_BT]); + if (ret) + goto exit; + +exit: + if (ret) + samsung_rfkill_exit(samsung); + + return ret; +} + +static int __init samsung_rfkill_init(struct samsung_laptop *samsung) +{ + if (samsung->config->sabi_version == 2) + return samsung_rfkill_init_seclinux(samsung); + if (samsung->config->sabi_version == 3) + return samsung_rfkill_init_swsmi(samsung); + return 0; +} + +static void samsung_lid_handling_exit(struct samsung_laptop *samsung) +{ + if (samsung->quirks->lid_handling) + write_lid_handling(samsung, 0); +} + +static int __init samsung_lid_handling_init(struct samsung_laptop *samsung) +{ + int retval = 0; + + if (samsung->quirks->lid_handling) + retval = write_lid_handling(samsung, 1); + + return retval; +} + +static int kbd_backlight_enable(struct samsung_laptop *samsung) +{ + const struct sabi_commands *commands = &samsung->config->commands; + struct sabi_data data; + int retval; + + if (commands->kbd_backlight == 0xFFFF) + return -ENODEV; + + memset(&data, 0, sizeof(data)); + data.d0 = 0xaabb; + retval = sabi_command(samsung, commands->kbd_backlight, + &data, &data); + + if (retval) + return retval; + + if (data.d0 != 0xccdd) + return -ENODEV; + return 0; +} + +static int kbd_backlight_read(struct samsung_laptop *samsung) +{ + const struct sabi_commands *commands = &samsung->config->commands; + struct sabi_data data; + int retval; + + memset(&data, 0, sizeof(data)); + data.data[0] = 0x81; + retval = sabi_command(samsung, commands->kbd_backlight, + &data, &data); + + if (retval) + return retval; + + return data.data[0]; +} + +static int kbd_backlight_write(struct samsung_laptop *samsung, int brightness) +{ + const struct sabi_commands *commands = &samsung->config->commands; + struct sabi_data data; + + memset(&data, 0, sizeof(data)); + data.d0 = 0x82 | ((brightness & 0xFF) << 8); + return sabi_command(samsung, commands->kbd_backlight, + &data, NULL); +} + +static void kbd_led_update(struct work_struct *work) +{ + struct samsung_laptop *samsung; + + samsung = container_of(work, struct samsung_laptop, kbd_led_work); + kbd_backlight_write(samsung, samsung->kbd_led_wk); +} + +static void kbd_led_set(struct led_classdev *led_cdev, + enum led_brightness value) +{ + struct samsung_laptop *samsung; + + samsung = container_of(led_cdev, struct samsung_laptop, kbd_led); + + if (value > samsung->kbd_led.max_brightness) + value = samsung->kbd_led.max_brightness; + + samsung->kbd_led_wk = value; + queue_work(samsung->led_workqueue, &samsung->kbd_led_work); +} + +static enum led_brightness kbd_led_get(struct led_classdev *led_cdev) +{ + struct samsung_laptop *samsung; + + samsung = container_of(led_cdev, struct samsung_laptop, kbd_led); + return kbd_backlight_read(samsung); +} + +static void samsung_leds_exit(struct samsung_laptop *samsung) +{ + led_classdev_unregister(&samsung->kbd_led); + if (samsung->led_workqueue) + destroy_workqueue(samsung->led_workqueue); +} + +static int __init samsung_leds_init(struct samsung_laptop *samsung) +{ + int ret = 0; + + samsung->led_workqueue = create_singlethread_workqueue("led_workqueue"); + if (!samsung->led_workqueue) + return -ENOMEM; + + if (kbd_backlight_enable(samsung) >= 0) { + INIT_WORK(&samsung->kbd_led_work, kbd_led_update); + + samsung->kbd_led.name = "samsung::kbd_backlight"; + samsung->kbd_led.brightness_set = kbd_led_set; + samsung->kbd_led.brightness_get = kbd_led_get; + samsung->kbd_led.max_brightness = 8; + if (samsung->quirks->four_kbd_backlight_levels) + samsung->kbd_led.max_brightness = 4; + + ret = led_classdev_register(&samsung->platform_device->dev, + &samsung->kbd_led); + } + + if (ret) + samsung_leds_exit(samsung); + + return ret; +} + +static void samsung_backlight_exit(struct samsung_laptop *samsung) +{ + if (samsung->backlight_device) { + backlight_device_unregister(samsung->backlight_device); + samsung->backlight_device = NULL; + } +} + +static int __init samsung_backlight_init(struct samsung_laptop *samsung) +{ + struct backlight_device *bd; + struct backlight_properties props; + + if (!samsung->handle_backlight) + return 0; + + memset(&props, 0, sizeof(struct backlight_properties)); + props.type = BACKLIGHT_PLATFORM; + props.max_brightness = samsung->config->max_brightness - + samsung->config->min_brightness; + + bd = backlight_device_register("samsung", + &samsung->platform_device->dev, + samsung, &backlight_ops, + &props); + if (IS_ERR(bd)) + return PTR_ERR(bd); + + samsung->backlight_device = bd; + samsung->backlight_device->props.brightness = read_brightness(samsung); + samsung->backlight_device->props.power = FB_BLANK_UNBLANK; + backlight_update_status(samsung->backlight_device); + + return 0; +} + +static umode_t samsung_sysfs_is_visible(struct kobject *kobj, + struct attribute *attr, int idx) +{ + struct device *dev = kobj_to_dev(kobj); + struct samsung_laptop *samsung = dev_get_drvdata(dev); + bool ok = true; + + if (attr == &dev_attr_performance_level.attr) + ok = !!samsung->config->performance_levels[0].name; + if (attr == &dev_attr_battery_life_extender.attr) + ok = !!(read_battery_life_extender(samsung) >= 0); + if (attr == &dev_attr_usb_charge.attr) + ok = !!(read_usb_charge(samsung) >= 0); + if (attr == &dev_attr_lid_handling.attr) + ok = !!(read_lid_handling(samsung) >= 0); + + return ok ? attr->mode : 0; +} + +static const struct attribute_group platform_attribute_group = { + .is_visible = samsung_sysfs_is_visible, + .attrs = platform_attributes +}; + +static void samsung_sysfs_exit(struct samsung_laptop *samsung) +{ + struct platform_device *device = samsung->platform_device; + + sysfs_remove_group(&device->dev.kobj, &platform_attribute_group); +} + +static int __init samsung_sysfs_init(struct samsung_laptop *samsung) +{ + struct platform_device *device = samsung->platform_device; + + return sysfs_create_group(&device->dev.kobj, &platform_attribute_group); + +} + +static int samsung_laptop_call_show(struct seq_file *m, void *data) +{ + struct samsung_laptop *samsung = m->private; + struct sabi_data *sdata = &samsung->debug.data; + int ret; + + seq_printf(m, "SABI 0x%04x {0x%08x, 0x%08x, 0x%04x, 0x%02x}\n", + samsung->debug.command, + sdata->d0, sdata->d1, sdata->d2, sdata->d3); + + ret = sabi_command(samsung, samsung->debug.command, sdata, sdata); + + if (ret) { + seq_printf(m, "SABI command 0x%04x failed\n", + samsung->debug.command); + return ret; + } + + seq_printf(m, "SABI {0x%08x, 0x%08x, 0x%04x, 0x%02x}\n", + sdata->d0, sdata->d1, sdata->d2, sdata->d3); + return 0; +} +DEFINE_SHOW_ATTRIBUTE(samsung_laptop_call); + +static void samsung_debugfs_exit(struct samsung_laptop *samsung) +{ + debugfs_remove_recursive(samsung->debug.root); +} + +static void samsung_debugfs_init(struct samsung_laptop *samsung) +{ + struct dentry *root; + + root = debugfs_create_dir("samsung-laptop", NULL); + samsung->debug.root = root; + + samsung->debug.f0000_wrapper.data = samsung->f0000_segment; + samsung->debug.f0000_wrapper.size = 0xffff; + + samsung->debug.data_wrapper.data = &samsung->debug.data; + samsung->debug.data_wrapper.size = sizeof(samsung->debug.data); + + samsung->debug.sdiag_wrapper.data = samsung->sdiag; + samsung->debug.sdiag_wrapper.size = strlen(samsung->sdiag); + + debugfs_create_u16("command", 0644, root, &samsung->debug.command); + debugfs_create_u32("d0", 0644, root, &samsung->debug.data.d0); + debugfs_create_u32("d1", 0644, root, &samsung->debug.data.d1); + debugfs_create_u16("d2", 0644, root, &samsung->debug.data.d2); + debugfs_create_u8("d3", 0644, root, &samsung->debug.data.d3); + debugfs_create_blob("data", 0444, root, &samsung->debug.data_wrapper); + debugfs_create_blob("f0000_segment", 0400, root, + &samsung->debug.f0000_wrapper); + debugfs_create_file("call", 0444, root, samsung, + &samsung_laptop_call_fops); + debugfs_create_blob("sdiag", 0444, root, &samsung->debug.sdiag_wrapper); +} + +static void samsung_sabi_exit(struct samsung_laptop *samsung) +{ + const struct sabi_config *config = samsung->config; + + /* Turn off "Linux" mode in the BIOS */ + if (config && config->commands.set_linux != 0xff) + sabi_set_commandb(samsung, config->commands.set_linux, 0x80); + + if (samsung->sabi_iface) { + iounmap(samsung->sabi_iface); + samsung->sabi_iface = NULL; + } + if (samsung->f0000_segment) { + iounmap(samsung->f0000_segment); + samsung->f0000_segment = NULL; + } + + samsung->config = NULL; +} + +static __init void samsung_sabi_infos(struct samsung_laptop *samsung, int loca, + unsigned int ifaceP) +{ + const struct sabi_config *config = samsung->config; + + printk(KERN_DEBUG "This computer supports SABI==%x\n", + loca + 0xf0000 - 6); + + printk(KERN_DEBUG "SABI header:\n"); + printk(KERN_DEBUG " SMI Port Number = 0x%04x\n", + readw(samsung->sabi + config->header_offsets.port)); + printk(KERN_DEBUG " SMI Interface Function = 0x%02x\n", + readb(samsung->sabi + config->header_offsets.iface_func)); + printk(KERN_DEBUG " SMI enable memory buffer = 0x%02x\n", + readb(samsung->sabi + config->header_offsets.en_mem)); + printk(KERN_DEBUG " SMI restore memory buffer = 0x%02x\n", + readb(samsung->sabi + config->header_offsets.re_mem)); + printk(KERN_DEBUG " SABI data offset = 0x%04x\n", + readw(samsung->sabi + config->header_offsets.data_offset)); + printk(KERN_DEBUG " SABI data segment = 0x%04x\n", + readw(samsung->sabi + config->header_offsets.data_segment)); + + printk(KERN_DEBUG " SABI pointer = 0x%08x\n", ifaceP); +} + +static void __init samsung_sabi_diag(struct samsung_laptop *samsung) +{ + int loca = find_signature(samsung->f0000_segment, "SDiaG@"); + int i; + + if (loca == 0xffff) + return ; + + /* Example: + * Ident: @SDiaG@686XX-N90X3A/966-SEC-07HL-S90X3A + * + * Product name: 90X3A + * BIOS Version: 07HL + */ + loca += 1; + for (i = 0; loca < 0xffff && i < sizeof(samsung->sdiag) - 1; loca++) { + char temp = readb(samsung->f0000_segment + loca); + + if (isalnum(temp) || temp == '/' || temp == '-') + samsung->sdiag[i++] = temp; + else + break ; + } + + if (debug && samsung->sdiag[0]) + pr_info("sdiag: %s", samsung->sdiag); +} + +static int __init samsung_sabi_init(struct samsung_laptop *samsung) +{ + const struct sabi_config *config = NULL; + const struct sabi_commands *commands; + unsigned int ifaceP; + int loca = 0xffff; + int ret = 0; + int i; + + samsung->f0000_segment = ioremap(0xf0000, 0xffff); + if (!samsung->f0000_segment) { + if (debug || force) + pr_err("Can't map the segment at 0xf0000\n"); + ret = -EINVAL; + goto exit; + } + + samsung_sabi_diag(samsung); + + /* Try to find one of the signatures in memory to find the header */ + for (i = 0; sabi_configs[i].test_string != NULL; ++i) { + samsung->config = &sabi_configs[i]; + loca = find_signature(samsung->f0000_segment, + samsung->config->test_string); + if (loca != 0xffff) + break; + } + + if (loca == 0xffff) { + if (debug || force) + pr_err("This computer does not support SABI\n"); + ret = -ENODEV; + goto exit; + } + + config = samsung->config; + commands = &config->commands; + + /* point to the SMI port Number */ + loca += 1; + samsung->sabi = (samsung->f0000_segment + loca); + + /* Get a pointer to the SABI Interface */ + ifaceP = (readw(samsung->sabi + config->header_offsets.data_segment) & 0x0ffff) << 4; + ifaceP += readw(samsung->sabi + config->header_offsets.data_offset) & 0x0ffff; + + if (debug) + samsung_sabi_infos(samsung, loca, ifaceP); + + samsung->sabi_iface = ioremap(ifaceP, 16); + if (!samsung->sabi_iface) { + pr_err("Can't remap %x\n", ifaceP); + ret = -EINVAL; + goto exit; + } + + /* Turn on "Linux" mode in the BIOS */ + if (commands->set_linux != 0xff) { + int retval = sabi_set_commandb(samsung, + commands->set_linux, 0x81); + if (retval) { + pr_warn("Linux mode was not set!\n"); + ret = -ENODEV; + goto exit; + } + } + + /* Check for stepping quirk */ + if (samsung->handle_backlight) + check_for_stepping_quirk(samsung); + + pr_info("detected SABI interface: %s\n", + samsung->config->test_string); + +exit: + if (ret) + samsung_sabi_exit(samsung); + + return ret; +} + +static void samsung_platform_exit(struct samsung_laptop *samsung) +{ + if (samsung->platform_device) { + platform_device_unregister(samsung->platform_device); + samsung->platform_device = NULL; + } +} + +static int samsung_pm_notification(struct notifier_block *nb, + unsigned long val, void *ptr) +{ + struct samsung_laptop *samsung; + + samsung = container_of(nb, struct samsung_laptop, pm_nb); + if (val == PM_POST_HIBERNATION && + samsung->quirks->enable_kbd_backlight) + kbd_backlight_enable(samsung); + + if (val == PM_POST_HIBERNATION && samsung->quirks->lid_handling) + write_lid_handling(samsung, 1); + + return 0; +} + +static int __init samsung_platform_init(struct samsung_laptop *samsung) +{ + struct platform_device *pdev; + + pdev = platform_device_register_simple("samsung", PLATFORM_DEVID_NONE, NULL, 0); + if (IS_ERR(pdev)) + return PTR_ERR(pdev); + + samsung->platform_device = pdev; + platform_set_drvdata(samsung->platform_device, samsung); + return 0; +} + +static struct samsung_quirks *quirks; + +static int __init samsung_dmi_matched(const struct dmi_system_id *d) +{ + quirks = d->driver_data; + return 0; +} + +static const struct dmi_system_id samsung_dmi_table[] __initconst = { + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, + "SAMSUNG ELECTRONICS CO., LTD."), + DMI_MATCH(DMI_CHASSIS_TYPE, "8"), /* Portable */ + }, + }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, + "SAMSUNG ELECTRONICS CO., LTD."), + DMI_MATCH(DMI_CHASSIS_TYPE, "9"), /* Laptop */ + }, + }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, + "SAMSUNG ELECTRONICS CO., LTD."), + DMI_MATCH(DMI_CHASSIS_TYPE, "10"), /* Notebook */ + }, + }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, + "SAMSUNG ELECTRONICS CO., LTD."), + DMI_MATCH(DMI_CHASSIS_TYPE, "14"), /* Sub-Notebook */ + }, + }, + /* DMI ids for laptops with bad Chassis Type */ + { + .ident = "R40/R41", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), + DMI_MATCH(DMI_PRODUCT_NAME, "R40/R41"), + DMI_MATCH(DMI_BOARD_NAME, "R40/R41"), + }, + }, + /* Specific DMI ids for laptop with quirks */ + { + .callback = samsung_dmi_matched, + .ident = "730U3E/740U3E", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), + DMI_MATCH(DMI_PRODUCT_NAME, "730U3E/740U3E"), + }, + .driver_data = &samsung_np740u3e, + }, + { + .callback = samsung_dmi_matched, + .ident = "300V3Z/300V4Z/300V5Z", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), + DMI_MATCH(DMI_PRODUCT_NAME, "300V3Z/300V4Z/300V5Z"), + }, + .driver_data = &samsung_lid_handling, + }, + { }, +}; +MODULE_DEVICE_TABLE(dmi, samsung_dmi_table); + +static struct platform_device *samsung_platform_device; + +static int __init samsung_init(void) +{ + struct samsung_laptop *samsung; + int ret; + + if (efi_enabled(EFI_BOOT)) + return -ENODEV; + + quirks = &samsung_unknown; + if (!force && !dmi_check_system(samsung_dmi_table)) + return -ENODEV; + + samsung = kzalloc(sizeof(*samsung), GFP_KERNEL); + if (!samsung) + return -ENOMEM; + + mutex_init(&samsung->sabi_mutex); + samsung->handle_backlight = true; + samsung->quirks = quirks; + + if (acpi_video_get_backlight_type() != acpi_backlight_vendor) + samsung->handle_backlight = false; + + ret = samsung_platform_init(samsung); + if (ret) + goto error_platform; + + ret = samsung_sabi_init(samsung); + if (ret) + goto error_sabi; + + ret = samsung_sysfs_init(samsung); + if (ret) + goto error_sysfs; + + ret = samsung_backlight_init(samsung); + if (ret) + goto error_backlight; + + ret = samsung_rfkill_init(samsung); + if (ret) + goto error_rfkill; + + ret = samsung_leds_init(samsung); + if (ret) + goto error_leds; + + ret = samsung_lid_handling_init(samsung); + if (ret) + goto error_lid_handling; + + samsung_debugfs_init(samsung); + + samsung->pm_nb.notifier_call = samsung_pm_notification; + register_pm_notifier(&samsung->pm_nb); + + samsung_platform_device = samsung->platform_device; + return ret; + +error_lid_handling: + samsung_leds_exit(samsung); +error_leds: + samsung_rfkill_exit(samsung); +error_rfkill: + samsung_backlight_exit(samsung); +error_backlight: + samsung_sysfs_exit(samsung); +error_sysfs: + samsung_sabi_exit(samsung); +error_sabi: + samsung_platform_exit(samsung); +error_platform: + kfree(samsung); + return ret; +} + +static void __exit samsung_exit(void) +{ + struct samsung_laptop *samsung; + + samsung = platform_get_drvdata(samsung_platform_device); + unregister_pm_notifier(&samsung->pm_nb); + + samsung_debugfs_exit(samsung); + samsung_lid_handling_exit(samsung); + samsung_leds_exit(samsung); + samsung_rfkill_exit(samsung); + samsung_backlight_exit(samsung); + samsung_sysfs_exit(samsung); + samsung_sabi_exit(samsung); + samsung_platform_exit(samsung); + + kfree(samsung); + samsung_platform_device = NULL; +} + +module_init(samsung_init); +module_exit(samsung_exit); + +MODULE_AUTHOR("Greg Kroah-Hartman <gregkh@suse.de>"); +MODULE_DESCRIPTION("Samsung Backlight driver"); +MODULE_LICENSE("GPL"); |