diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/platform/x86/winmate-fm07-keys.c | 189 |
1 files changed, 189 insertions, 0 deletions
diff --git a/drivers/platform/x86/winmate-fm07-keys.c b/drivers/platform/x86/winmate-fm07-keys.c new file mode 100644 index 0000000000..465ffad81a --- /dev/null +++ b/drivers/platform/x86/winmate-fm07-keys.c @@ -0,0 +1,189 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Driver for the Winmate FM07 front-panel keys +// +// Author: Daniel Beer <daniel.beer@tirotech.co.nz> + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/input.h> +#include <linux/ioport.h> +#include <linux/platform_device.h> +#include <linux/dmi.h> +#include <linux/io.h> + +#define DRV_NAME "winmate-fm07keys" + +#define PORT_CMD 0x6c +#define PORT_DATA 0x68 + +#define EC_ADDR_KEYS 0x3b +#define EC_CMD_READ 0x80 + +#define BASE_KEY KEY_F13 +#define NUM_KEYS 5 + +/* Typically we're done in fewer than 10 iterations */ +#define LOOP_TIMEOUT 1000 + +static void fm07keys_poll(struct input_dev *input) +{ + uint8_t k; + int i; + + /* Flush output buffer */ + i = 0; + while (inb(PORT_CMD) & 0x01) { + if (++i >= LOOP_TIMEOUT) + goto timeout; + inb(PORT_DATA); + } + + /* Send request and wait for write completion */ + outb(EC_CMD_READ, PORT_CMD); + i = 0; + while (inb(PORT_CMD) & 0x02) + if (++i >= LOOP_TIMEOUT) + goto timeout; + + outb(EC_ADDR_KEYS, PORT_DATA); + i = 0; + while (inb(PORT_CMD) & 0x02) + if (++i >= LOOP_TIMEOUT) + goto timeout; + + /* Wait for data ready */ + i = 0; + while (!(inb(PORT_CMD) & 0x01)) + if (++i >= LOOP_TIMEOUT) + goto timeout; + k = inb(PORT_DATA); + + /* Notify of new key states */ + for (i = 0; i < NUM_KEYS; i++) { + input_report_key(input, BASE_KEY + i, (~k) & 1); + k >>= 1; + } + + input_sync(input); + return; + +timeout: + dev_warn_ratelimited(&input->dev, "timeout polling IO memory\n"); +} + +static int fm07keys_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct input_dev *input; + int ret; + int i; + + input = devm_input_allocate_device(dev); + if (!input) { + dev_err(dev, "no memory for input device\n"); + return -ENOMEM; + } + + if (!devm_request_region(dev, PORT_CMD, 1, "Winmate FM07 EC")) + return -EBUSY; + if (!devm_request_region(dev, PORT_DATA, 1, "Winmate FM07 EC")) + return -EBUSY; + + input->name = "Winmate FM07 front-panel keys"; + input->phys = DRV_NAME "/input0"; + + input->id.bustype = BUS_HOST; + input->id.vendor = 0x0001; + input->id.product = 0x0001; + input->id.version = 0x0100; + + __set_bit(EV_KEY, input->evbit); + + for (i = 0; i < NUM_KEYS; i++) + __set_bit(BASE_KEY + i, input->keybit); + + ret = input_setup_polling(input, fm07keys_poll); + if (ret) { + dev_err(dev, "unable to set up polling, err=%d\n", ret); + return ret; + } + + /* These are silicone buttons. They can't be pressed in rapid + * succession too quickly, and 50 Hz seems to be an adequate + * sampling rate without missing any events when tested. + */ + input_set_poll_interval(input, 20); + + ret = input_register_device(input); + if (ret) { + dev_err(dev, "unable to register polled device, err=%d\n", + ret); + return ret; + } + + input_sync(input); + return 0; +} + +static struct platform_driver fm07keys_driver = { + .probe = fm07keys_probe, + .driver = { + .name = DRV_NAME + }, +}; + +static struct platform_device *dev; + +static const struct dmi_system_id fm07keys_dmi_table[] __initconst = { + { + /* FM07 and FM07P */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Winmate Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "IP30"), + }, + }, + { } +}; + +MODULE_DEVICE_TABLE(dmi, fm07keys_dmi_table); + +static int __init fm07keys_init(void) +{ + int ret; + + if (!dmi_check_system(fm07keys_dmi_table)) + return -ENODEV; + + ret = platform_driver_register(&fm07keys_driver); + if (ret) { + pr_err("fm07keys: failed to register driver, err=%d\n", ret); + return ret; + } + + dev = platform_device_register_simple(DRV_NAME, PLATFORM_DEVID_NONE, NULL, 0); + if (IS_ERR(dev)) { + ret = PTR_ERR(dev); + pr_err("fm07keys: failed to allocate device, err = %d\n", ret); + goto fail_register; + } + + return 0; + +fail_register: + platform_driver_unregister(&fm07keys_driver); + return ret; +} + +static void __exit fm07keys_exit(void) +{ + platform_driver_unregister(&fm07keys_driver); + platform_device_unregister(dev); +} + +module_init(fm07keys_init); +module_exit(fm07keys_exit); + +MODULE_AUTHOR("Daniel Beer <daniel.beer@tirotech.co.nz>"); +MODULE_DESCRIPTION("Winmate FM07 front-panel keys driver"); +MODULE_LICENSE("GPL"); |