diff options
Diffstat (limited to 'drivers/power/supply/mm8013.c')
| -rw-r--r-- | drivers/power/supply/mm8013.c | 317 |
1 files changed, 317 insertions, 0 deletions
diff --git a/drivers/power/supply/mm8013.c b/drivers/power/supply/mm8013.c new file mode 100644 index 000000000..caa272b03 --- /dev/null +++ b/drivers/power/supply/mm8013.c @@ -0,0 +1,317 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2016-2019 The Linux Foundation. All rights reserved. + * Copyright (c) 2023, Linaro Limited + */ +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/power_supply.h> +#include <linux/regmap.h> + +#define REG_BATID 0x00 /* This one is very unclear */ + #define BATID_101 0x0101 /* 107kOhm */ + #define BATID_102 0x0102 /* 10kOhm */ +#define REG_TEMPERATURE 0x06 +#define REG_VOLTAGE 0x08 +#define REG_FLAGS 0x0a + #define MM8013_FLAG_OTC BIT(15) + #define MM8013_FLAG_OTD BIT(14) + #define MM8013_FLAG_BATHI BIT(13) + #define MM8013_FLAG_BATLOW BIT(12) + #define MM8013_FLAG_CHG_INH BIT(11) + #define MM8013_FLAG_FC BIT(9) + #define MM8013_FLAG_CHG BIT(8) + #define MM8013_FLAG_OCC BIT(6) + #define MM8013_FLAG_ODC BIT(5) + #define MM8013_FLAG_OT BIT(4) + #define MM8013_FLAG_UT BIT(3) + #define MM8013_FLAG_DSG BIT(0) +#define REG_FULL_CHARGE_CAPACITY 0x0e +#define REG_NOMINAL_CHARGE_CAPACITY 0x0c +#define REG_AVERAGE_CURRENT 0x14 +#define REG_AVERAGE_TIME_TO_EMPTY 0x16 +#define REG_AVERAGE_TIME_TO_FULL 0x18 +#define REG_MAX_LOAD_CURRENT 0x1e +#define REG_CYCLE_COUNT 0x2a +#define REG_STATE_OF_CHARGE 0x2c +#define REG_DESIGN_CAPACITY 0x3c +/* TODO: 0x62-0x68 seem to contain 'MM8013C' in a length-prefixed, non-terminated string */ + +#define DECIKELVIN_TO_DECIDEGC(t) (t - 2731) + +struct mm8013_chip { + struct i2c_client *client; + struct regmap *regmap; +}; + +static int mm8013_checkdevice(struct mm8013_chip *chip) +{ + int battery_id, ret; + u32 val; + + ret = regmap_write(chip->regmap, REG_BATID, 0x0008); + if (ret < 0) + return ret; + + ret = regmap_read(chip->regmap, REG_BATID, &val); + if (ret < 0) + return ret; + + if (val == BATID_102) + battery_id = 2; + else if (val == BATID_101) + battery_id = 1; + else + return -EINVAL; + + dev_dbg(&chip->client->dev, "battery_id: %d\n", battery_id); + + return 0; +} + +static enum power_supply_property mm8013_battery_props[] = { + POWER_SUPPLY_PROP_CAPACITY, + POWER_SUPPLY_PROP_CHARGE_BEHAVIOUR, + POWER_SUPPLY_PROP_CHARGE_FULL, + POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, + POWER_SUPPLY_PROP_CHARGE_NOW, + POWER_SUPPLY_PROP_CURRENT_MAX, + POWER_SUPPLY_PROP_CURRENT_NOW, + POWER_SUPPLY_PROP_CYCLE_COUNT, + POWER_SUPPLY_PROP_HEALTH, + POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_TEMP, + POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG, + POWER_SUPPLY_PROP_TIME_TO_FULL_AVG, + POWER_SUPPLY_PROP_VOLTAGE_NOW, +}; + +static int mm8013_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct mm8013_chip *chip = psy->drv_data; + int ret = 0; + u32 regval; + + switch (psp) { + case POWER_SUPPLY_PROP_CAPACITY: + ret = regmap_read(chip->regmap, REG_STATE_OF_CHARGE, ®val); + if (ret < 0) + return ret; + + val->intval = regval; + break; + case POWER_SUPPLY_PROP_CHARGE_BEHAVIOUR: + ret = regmap_read(chip->regmap, REG_FLAGS, ®val); + if (ret < 0) + return ret; + + if (regval & MM8013_FLAG_CHG_INH) + val->intval = POWER_SUPPLY_CHARGE_BEHAVIOUR_INHIBIT_CHARGE; + else + val->intval = POWER_SUPPLY_CHARGE_BEHAVIOUR_AUTO; + break; + case POWER_SUPPLY_PROP_CHARGE_FULL: + ret = regmap_read(chip->regmap, REG_FULL_CHARGE_CAPACITY, ®val); + if (ret < 0) + return ret; + + val->intval = 1000 * regval; + break; + case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN: + ret = regmap_read(chip->regmap, REG_DESIGN_CAPACITY, ®val); + if (ret < 0) + return ret; + + val->intval = 1000 * regval; + break; + case POWER_SUPPLY_PROP_CHARGE_NOW: + ret = regmap_read(chip->regmap, REG_NOMINAL_CHARGE_CAPACITY, ®val); + if (ret < 0) + return ret; + + val->intval = 1000 * regval; + break; + case POWER_SUPPLY_PROP_CURRENT_MAX: + ret = regmap_read(chip->regmap, REG_MAX_LOAD_CURRENT, ®val); + if (ret < 0) + return ret; + + val->intval = -1000 * (s16)regval; + break; + case POWER_SUPPLY_PROP_CURRENT_NOW: + ret = regmap_read(chip->regmap, REG_AVERAGE_CURRENT, ®val); + if (ret < 0) + return ret; + + val->intval = -1000 * (s16)regval; + break; + case POWER_SUPPLY_PROP_CYCLE_COUNT: + ret = regmap_read(chip->regmap, REG_CYCLE_COUNT, ®val); + if (ret < 0) + return ret; + + val->intval = regval; + break; + case POWER_SUPPLY_PROP_HEALTH: + ret = regmap_read(chip->regmap, REG_FLAGS, ®val); + if (ret < 0) + return ret; + + if (regval & MM8013_FLAG_UT) + val->intval = POWER_SUPPLY_HEALTH_COLD; + else if (regval & (MM8013_FLAG_ODC | MM8013_FLAG_OCC)) + val->intval = POWER_SUPPLY_HEALTH_OVERCURRENT; + else if (regval & (MM8013_FLAG_BATLOW)) + val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE; + else if (regval & MM8013_FLAG_BATHI) + val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE; + else if (regval & (MM8013_FLAG_OT | MM8013_FLAG_OTD | MM8013_FLAG_OTC)) + val->intval = POWER_SUPPLY_HEALTH_OVERHEAT; + else + val->intval = POWER_SUPPLY_HEALTH_GOOD; + break; + case POWER_SUPPLY_PROP_PRESENT: + ret = regmap_read(chip->regmap, REG_TEMPERATURE, ®val); + if (ret < 0) + return ret; + + val->intval = ((s16)regval > 0); + break; + case POWER_SUPPLY_PROP_STATUS: + ret = regmap_read(chip->regmap, REG_FLAGS, ®val); + if (ret < 0) + return ret; + + if (regval & MM8013_FLAG_DSG) + val->intval = POWER_SUPPLY_STATUS_DISCHARGING; + else if (regval & MM8013_FLAG_CHG) + val->intval = POWER_SUPPLY_STATUS_CHARGING; + else if (regval & MM8013_FLAG_FC) + val->intval = POWER_SUPPLY_STATUS_FULL; + else + val->intval = POWER_SUPPLY_STATUS_UNKNOWN; + break; + case POWER_SUPPLY_PROP_TEMP: + ret = regmap_read(chip->regmap, REG_TEMPERATURE, ®val); + if (ret < 0) + return ret; + + val->intval = DECIKELVIN_TO_DECIDEGC(regval); + break; + case POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG: + ret = regmap_read(chip->regmap, REG_AVERAGE_TIME_TO_EMPTY, ®val); + if (ret < 0) + return ret; + + /* The estimation is not yet ready */ + if (regval == U16_MAX) + return -ENODATA; + + val->intval = regval; + break; + case POWER_SUPPLY_PROP_TIME_TO_FULL_AVG: + ret = regmap_read(chip->regmap, REG_AVERAGE_TIME_TO_FULL, ®val); + if (ret < 0) + return ret; + + /* The estimation is not yet ready */ + if (regval == U16_MAX) + return -ENODATA; + + val->intval = regval; + break; + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + ret = regmap_read(chip->regmap, REG_VOLTAGE, ®val); + if (ret < 0) + return ret; + + val->intval = 1000 * regval; + break; + default: + return -EINVAL; + } + + return 0; +} + +static const struct power_supply_desc mm8013_desc = { + .name = "mm8013", + .type = POWER_SUPPLY_TYPE_BATTERY, + .properties = mm8013_battery_props, + .num_properties = ARRAY_SIZE(mm8013_battery_props), + .get_property = mm8013_get_property, +}; + +static const struct regmap_config mm8013_regmap_config = { + .reg_bits = 8, + .val_bits = 16, + .max_register = 0x68, + .use_single_read = true, + .use_single_write = true, + .val_format_endian = REGMAP_ENDIAN_LITTLE, +}; + +static int mm8013_probe(struct i2c_client *client) +{ + struct power_supply_config psy_cfg = {}; + struct device *dev = &client->dev; + struct power_supply *psy; + struct mm8013_chip *chip; + int ret = 0; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA)) + return dev_err_probe(dev, -EIO, + "I2C_FUNC_SMBUS_WORD_DATA not supported\n"); + + chip = devm_kzalloc(dev, sizeof(struct mm8013_chip), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + chip->client = client; + + chip->regmap = devm_regmap_init_i2c(client, &mm8013_regmap_config); + if (IS_ERR(chip->regmap)) { + ret = PTR_ERR(chip->regmap); + return dev_err_probe(dev, ret, "Couldn't initialize regmap\n"); + } + + ret = mm8013_checkdevice(chip); + if (ret) + return dev_err_probe(dev, ret, "MM8013 not found\n"); + + psy_cfg.drv_data = chip; + psy_cfg.of_node = dev->of_node; + + psy = devm_power_supply_register(dev, &mm8013_desc, &psy_cfg); + if (IS_ERR(psy)) + return PTR_ERR(psy); + + return 0; +} + +static const struct i2c_device_id mm8013_id_table[] = { + { "mm8013", 0 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, mm8013_id_table); + +static const struct of_device_id mm8013_match_table[] = { + { .compatible = "mitsumi,mm8013" }, + {} +}; + +static struct i2c_driver mm8013_i2c_driver = { + .probe = mm8013_probe, + .id_table = mm8013_id_table, + .driver = { + .name = "mm8013", + .of_match_table = mm8013_match_table, + }, +}; +module_i2c_driver(mm8013_i2c_driver); + +MODULE_DESCRIPTION("MM8013 fuel gauge driver"); +MODULE_LICENSE("GPL"); |