summaryrefslogtreecommitdiffstats
path: root/drivers/pwm/pwm-ab8500.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/pwm/pwm-ab8500.c')
-rw-r--r--drivers/pwm/pwm-ab8500.c228
1 files changed, 228 insertions, 0 deletions
diff --git a/drivers/pwm/pwm-ab8500.c b/drivers/pwm/pwm-ab8500.c
new file mode 100644
index 0000000000..583a7d69c7
--- /dev/null
+++ b/drivers/pwm/pwm-ab8500.c
@@ -0,0 +1,228 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Arun R Murthy <arun.murthy@stericsson.com>
+ * Datasheet: https://web.archive.org/web/20130614115108/http://www.stericsson.com/developers/CD00291561_UM1031_AB8500_user_manual-rev5_CTDS_public.pdf
+ */
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/pwm.h>
+#include <linux/mfd/abx500.h>
+#include <linux/mfd/abx500/ab8500.h>
+#include <linux/module.h>
+
+/*
+ * PWM Out generators
+ * Bank: 0x10
+ */
+#define AB8500_PWM_OUT_CTRL1_REG 0x60
+#define AB8500_PWM_OUT_CTRL2_REG 0x61
+#define AB8500_PWM_OUT_CTRL7_REG 0x66
+
+#define AB8500_PWM_CLKRATE 9600000
+
+struct ab8500_pwm_chip {
+ struct pwm_chip chip;
+ unsigned int hwid;
+};
+
+static struct ab8500_pwm_chip *ab8500_pwm_from_chip(struct pwm_chip *chip)
+{
+ return container_of(chip, struct ab8500_pwm_chip, chip);
+}
+
+static int ab8500_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+ const struct pwm_state *state)
+{
+ int ret;
+ u8 reg;
+ u8 higher_val, lower_val;
+ unsigned int duty_steps, div;
+ struct ab8500_pwm_chip *ab8500 = ab8500_pwm_from_chip(chip);
+
+ if (state->polarity != PWM_POLARITY_NORMAL)
+ return -EINVAL;
+
+ if (state->enabled) {
+ /*
+ * A time quantum is
+ * q = (32 - FreqPWMOutx[3:0]) / AB8500_PWM_CLKRATE
+ * The period is always 1024 q, duty_cycle is between 1q and 1024q.
+ *
+ * FreqPWMOutx[3:0] | output frequency | output frequency | 1024q = period
+ * | (from manual) | (1 / 1024q) | = 1 / freq
+ * -----------------+------------------+------------------+--------------
+ * b0000 | 293 Hz | 292.968750 Hz | 3413333.33 ns
+ * b0001 | 302 Hz | 302.419355 Hz | 3306666.66 ns
+ * b0010 | 312 Hz | 312.500000 Hz | 3200000 ns
+ * b0011 | 323 Hz | 323.275862 Hz | 3093333.33 ns
+ * b0100 | 334 Hz | 334.821429 Hz | 2986666.66 ns
+ * b0101 | 347 Hz | 347.222222 Hz | 2880000 ns
+ * b0110 | 360 Hz | 360.576923 Hz | 2773333.33 ns
+ * b0111 | 375 Hz | 375.000000 Hz | 2666666.66 ns
+ * b1000 | 390 Hz | 390.625000 Hz | 2560000 ns
+ * b1001 | 407 Hz | 407.608696 Hz | 2453333.33 ns
+ * b1010 | 426 Hz | 426.136364 Hz | 2346666.66 ns
+ * b1011 | 446 Hz | 446.428571 Hz | 2240000 ns
+ * b1100 | 468 Hz | 468.750000 Hz | 2133333.33 ns
+ * b1101 | 493 Hz | 493.421053 Hz | 2026666.66 ns
+ * b1110 | 520 Hz | 520.833333 Hz | 1920000 ns
+ * b1111 | 551 Hz | 551.470588 Hz | 1813333.33 ns
+ *
+ *
+ * AB8500_PWM_CLKRATE is a multiple of 1024, so the division by
+ * 1024 can be done in this factor without loss of precision.
+ */
+ div = min_t(u64, mul_u64_u64_div_u64(state->period,
+ AB8500_PWM_CLKRATE >> 10,
+ NSEC_PER_SEC), 32); /* 32 - FreqPWMOutx[3:0] */
+ if (div <= 16)
+ /* requested period < 3413333.33 */
+ return -EINVAL;
+
+ duty_steps = max_t(u64, mul_u64_u64_div_u64(state->duty_cycle,
+ AB8500_PWM_CLKRATE,
+ (u64)NSEC_PER_SEC * div), 1024);
+ }
+
+ /*
+ * The hardware doesn't support duty_steps = 0 explicitly, but emits low
+ * when disabled.
+ */
+ if (!state->enabled || duty_steps == 0) {
+ ret = abx500_mask_and_set_register_interruptible(chip->dev,
+ AB8500_MISC, AB8500_PWM_OUT_CTRL7_REG,
+ 1 << ab8500->hwid, 0);
+
+ if (ret < 0)
+ dev_err(chip->dev, "%s: Failed to disable PWM, Error %d\n",
+ pwm->label, ret);
+ return ret;
+ }
+
+ /*
+ * The lower 8 bits of duty_steps is written to ...
+ * AB8500_PWM_OUT_CTRL1_REG[0:7]
+ */
+ lower_val = (duty_steps - 1) & 0x00ff;
+ /*
+ * The two remaining high bits to
+ * AB8500_PWM_OUT_CTRL2_REG[0:1]; together with FreqPWMOutx.
+ */
+ higher_val = ((duty_steps - 1) & 0x0300) >> 8 | (32 - div) << 4;
+
+ reg = AB8500_PWM_OUT_CTRL1_REG + (ab8500->hwid * 2);
+
+ ret = abx500_set_register_interruptible(chip->dev, AB8500_MISC,
+ reg, lower_val);
+ if (ret < 0)
+ return ret;
+
+ ret = abx500_set_register_interruptible(chip->dev, AB8500_MISC,
+ (reg + 1), higher_val);
+ if (ret < 0)
+ return ret;
+
+ /* enable */
+ ret = abx500_mask_and_set_register_interruptible(chip->dev,
+ AB8500_MISC, AB8500_PWM_OUT_CTRL7_REG,
+ 1 << ab8500->hwid, 1 << ab8500->hwid);
+ if (ret < 0)
+ dev_err(chip->dev, "%s: Failed to enable PWM, Error %d\n",
+ pwm->label, ret);
+
+ return ret;
+}
+
+static int ab8500_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
+ struct pwm_state *state)
+{
+ u8 ctrl7, lower_val, higher_val;
+ int ret;
+ struct ab8500_pwm_chip *ab8500 = ab8500_pwm_from_chip(chip);
+ unsigned int div, duty_steps;
+
+ ret = abx500_get_register_interruptible(chip->dev, AB8500_MISC,
+ AB8500_PWM_OUT_CTRL7_REG,
+ &ctrl7);
+ if (ret)
+ return ret;
+
+ state->polarity = PWM_POLARITY_NORMAL;
+
+ if (!(ctrl7 & 1 << ab8500->hwid)) {
+ state->enabled = false;
+ return 0;
+ }
+
+ ret = abx500_get_register_interruptible(chip->dev, AB8500_MISC,
+ AB8500_PWM_OUT_CTRL1_REG + (ab8500->hwid * 2),
+ &lower_val);
+ if (ret)
+ return ret;
+
+ ret = abx500_get_register_interruptible(chip->dev, AB8500_MISC,
+ AB8500_PWM_OUT_CTRL2_REG + (ab8500->hwid * 2),
+ &higher_val);
+ if (ret)
+ return ret;
+
+ div = 32 - ((higher_val & 0xf0) >> 4);
+ duty_steps = ((higher_val & 3) << 8 | lower_val) + 1;
+
+ state->period = DIV64_U64_ROUND_UP((u64)div << 10, AB8500_PWM_CLKRATE);
+ state->duty_cycle = DIV64_U64_ROUND_UP((u64)div * duty_steps, AB8500_PWM_CLKRATE);
+
+ return 0;
+}
+
+static const struct pwm_ops ab8500_pwm_ops = {
+ .apply = ab8500_pwm_apply,
+ .get_state = ab8500_pwm_get_state,
+ .owner = THIS_MODULE,
+};
+
+static int ab8500_pwm_probe(struct platform_device *pdev)
+{
+ struct ab8500_pwm_chip *ab8500;
+ int err;
+
+ if (pdev->id < 1 || pdev->id > 31)
+ return dev_err_probe(&pdev->dev, -EINVAL, "Invalid device id %d\n", pdev->id);
+
+ /*
+ * Nothing to be done in probe, this is required to get the
+ * device which is required for ab8500 read and write
+ */
+ ab8500 = devm_kzalloc(&pdev->dev, sizeof(*ab8500), GFP_KERNEL);
+ if (ab8500 == NULL)
+ return -ENOMEM;
+
+ ab8500->chip.dev = &pdev->dev;
+ ab8500->chip.ops = &ab8500_pwm_ops;
+ ab8500->chip.npwm = 1;
+ ab8500->hwid = pdev->id - 1;
+
+ err = devm_pwmchip_add(&pdev->dev, &ab8500->chip);
+ if (err < 0)
+ return dev_err_probe(&pdev->dev, err, "Failed to add pwm chip\n");
+
+ dev_dbg(&pdev->dev, "pwm probe successful\n");
+
+ return 0;
+}
+
+static struct platform_driver ab8500_pwm_driver = {
+ .driver = {
+ .name = "ab8500-pwm",
+ },
+ .probe = ab8500_pwm_probe,
+};
+module_platform_driver(ab8500_pwm_driver);
+
+MODULE_AUTHOR("Arun MURTHY <arun.murthy@stericsson.com>");
+MODULE_DESCRIPTION("AB8500 Pulse Width Modulation Driver");
+MODULE_ALIAS("platform:ab8500-pwm");
+MODULE_LICENSE("GPL v2");