summaryrefslogtreecommitdiffstats
path: root/drivers/pwm/pwm-sti.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/pwm/pwm-sti.c')
-rw-r--r--drivers/pwm/pwm-sti.c699
1 files changed, 699 insertions, 0 deletions
diff --git a/drivers/pwm/pwm-sti.c b/drivers/pwm/pwm-sti.c
new file mode 100644
index 0000000000..c8800f84b9
--- /dev/null
+++ b/drivers/pwm/pwm-sti.c
@@ -0,0 +1,699 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * PWM device driver for ST SoCs
+ *
+ * Copyright (C) 2013-2016 STMicroelectronics (R&D) Limited
+ *
+ * Author: Ajit Pal Singh <ajitpal.singh@st.com>
+ * Lee Jones <lee.jones@linaro.org>
+ */
+
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/math64.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/regmap.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/time.h>
+#include <linux/wait.h>
+
+#define PWM_OUT_VAL(x) (0x00 + (4 * (x))) /* Device's Duty Cycle register */
+#define PWM_CPT_VAL(x) (0x10 + (4 * (x))) /* Capture value */
+#define PWM_CPT_EDGE(x) (0x30 + (4 * (x))) /* Edge to capture on */
+
+#define STI_PWM_CTRL 0x50 /* Control/Config register */
+#define STI_INT_EN 0x54 /* Interrupt Enable/Disable register */
+#define STI_INT_STA 0x58 /* Interrupt Status register */
+#define PWM_INT_ACK 0x5c
+#define PWM_PRESCALE_LOW_MASK 0x0f
+#define PWM_PRESCALE_HIGH_MASK 0xf0
+#define PWM_CPT_EDGE_MASK 0x03
+#define PWM_INT_ACK_MASK 0x1ff
+
+#define STI_MAX_CPT_DEVS 4
+#define CPT_DC_MAX 0xff
+
+/* Regfield IDs */
+enum {
+ /* Bits in PWM_CTRL*/
+ PWMCLK_PRESCALE_LOW,
+ PWMCLK_PRESCALE_HIGH,
+ CPTCLK_PRESCALE,
+
+ PWM_OUT_EN,
+ PWM_CPT_EN,
+
+ PWM_CPT_INT_EN,
+ PWM_CPT_INT_STAT,
+
+ /* Keep last */
+ MAX_REGFIELDS
+};
+
+/*
+ * Each capture input can be programmed to detect rising-edge, falling-edge,
+ * either edge or neither egde.
+ */
+enum sti_cpt_edge {
+ CPT_EDGE_DISABLED,
+ CPT_EDGE_RISING,
+ CPT_EDGE_FALLING,
+ CPT_EDGE_BOTH,
+};
+
+struct sti_cpt_ddata {
+ u32 snapshot[3];
+ unsigned int index;
+ struct mutex lock;
+ wait_queue_head_t wait;
+};
+
+struct sti_pwm_compat_data {
+ const struct reg_field *reg_fields;
+ unsigned int pwm_num_devs;
+ unsigned int cpt_num_devs;
+ unsigned int max_pwm_cnt;
+ unsigned int max_prescale;
+ struct sti_cpt_ddata *ddata;
+};
+
+struct sti_pwm_chip {
+ struct device *dev;
+ struct clk *pwm_clk;
+ struct clk *cpt_clk;
+ struct regmap *regmap;
+ struct sti_pwm_compat_data *cdata;
+ struct regmap_field *prescale_low;
+ struct regmap_field *prescale_high;
+ struct regmap_field *pwm_out_en;
+ struct regmap_field *pwm_cpt_en;
+ struct regmap_field *pwm_cpt_int_en;
+ struct regmap_field *pwm_cpt_int_stat;
+ struct pwm_chip chip;
+ struct pwm_device *cur;
+ unsigned long configured;
+ unsigned int en_count;
+ struct mutex sti_pwm_lock; /* To sync between enable/disable calls */
+ void __iomem *mmio;
+};
+
+static const struct reg_field sti_pwm_regfields[MAX_REGFIELDS] = {
+ [PWMCLK_PRESCALE_LOW] = REG_FIELD(STI_PWM_CTRL, 0, 3),
+ [PWMCLK_PRESCALE_HIGH] = REG_FIELD(STI_PWM_CTRL, 11, 14),
+ [CPTCLK_PRESCALE] = REG_FIELD(STI_PWM_CTRL, 4, 8),
+ [PWM_OUT_EN] = REG_FIELD(STI_PWM_CTRL, 9, 9),
+ [PWM_CPT_EN] = REG_FIELD(STI_PWM_CTRL, 10, 10),
+ [PWM_CPT_INT_EN] = REG_FIELD(STI_INT_EN, 1, 4),
+ [PWM_CPT_INT_STAT] = REG_FIELD(STI_INT_STA, 1, 4),
+};
+
+static inline struct sti_pwm_chip *to_sti_pwmchip(struct pwm_chip *chip)
+{
+ return container_of(chip, struct sti_pwm_chip, chip);
+}
+
+/*
+ * Calculate the prescaler value corresponding to the period.
+ */
+static int sti_pwm_get_prescale(struct sti_pwm_chip *pc, unsigned long period,
+ unsigned int *prescale)
+{
+ struct sti_pwm_compat_data *cdata = pc->cdata;
+ unsigned long clk_rate;
+ unsigned long value;
+ unsigned int ps;
+
+ clk_rate = clk_get_rate(pc->pwm_clk);
+ if (!clk_rate) {
+ dev_err(pc->dev, "failed to get clock rate\n");
+ return -EINVAL;
+ }
+
+ /*
+ * prescale = ((period_ns * clk_rate) / (10^9 * (max_pwm_cnt + 1)) - 1
+ */
+ value = NSEC_PER_SEC / clk_rate;
+ value *= cdata->max_pwm_cnt + 1;
+
+ if (period % value)
+ return -EINVAL;
+
+ ps = period / value - 1;
+ if (ps > cdata->max_prescale)
+ return -EINVAL;
+
+ *prescale = ps;
+
+ return 0;
+}
+
+/*
+ * For STiH4xx PWM IP, the PWM period is fixed to 256 local clock cycles. The
+ * only way to change the period (apart from changing the PWM input clock) is
+ * to change the PWM clock prescaler.
+ *
+ * The prescaler is of 8 bits, so 256 prescaler values and hence 256 possible
+ * period values are supported (for a particular clock rate). The requested
+ * period will be applied only if it matches one of these 256 values.
+ */
+static int sti_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+ int duty_ns, int period_ns)
+{
+ struct sti_pwm_chip *pc = to_sti_pwmchip(chip);
+ struct sti_pwm_compat_data *cdata = pc->cdata;
+ unsigned int ncfg, value, prescale = 0;
+ struct pwm_device *cur = pc->cur;
+ struct device *dev = pc->dev;
+ bool period_same = false;
+ int ret;
+
+ ncfg = hweight_long(pc->configured);
+ if (ncfg)
+ period_same = (period_ns == pwm_get_period(cur));
+
+ /*
+ * Allow configuration changes if one of the following conditions
+ * satisfy.
+ * 1. No devices have been configured.
+ * 2. Only one device has been configured and the new request is for
+ * the same device.
+ * 3. Only one device has been configured and the new request is for
+ * a new device and period of the new device is same as the current
+ * configured period.
+ * 4. More than one devices are configured and period of the new
+ * requestis the same as the current period.
+ */
+ if (!ncfg ||
+ ((ncfg == 1) && (pwm->hwpwm == cur->hwpwm)) ||
+ ((ncfg == 1) && (pwm->hwpwm != cur->hwpwm) && period_same) ||
+ ((ncfg > 1) && period_same)) {
+ /* Enable clock before writing to PWM registers. */
+ ret = clk_enable(pc->pwm_clk);
+ if (ret)
+ return ret;
+
+ ret = clk_enable(pc->cpt_clk);
+ if (ret)
+ return ret;
+
+ if (!period_same) {
+ ret = sti_pwm_get_prescale(pc, period_ns, &prescale);
+ if (ret)
+ goto clk_dis;
+
+ value = prescale & PWM_PRESCALE_LOW_MASK;
+
+ ret = regmap_field_write(pc->prescale_low, value);
+ if (ret)
+ goto clk_dis;
+
+ value = (prescale & PWM_PRESCALE_HIGH_MASK) >> 4;
+
+ ret = regmap_field_write(pc->prescale_high, value);
+ if (ret)
+ goto clk_dis;
+ }
+
+ /*
+ * When PWMVal == 0, PWM pulse = 1 local clock cycle.
+ * When PWMVal == max_pwm_count,
+ * PWM pulse = (max_pwm_count + 1) local cycles,
+ * that is continuous pulse: signal never goes low.
+ */
+ value = cdata->max_pwm_cnt * duty_ns / period_ns;
+
+ ret = regmap_write(pc->regmap, PWM_OUT_VAL(pwm->hwpwm), value);
+ if (ret)
+ goto clk_dis;
+
+ ret = regmap_field_write(pc->pwm_cpt_int_en, 0);
+
+ set_bit(pwm->hwpwm, &pc->configured);
+ pc->cur = pwm;
+
+ dev_dbg(dev, "prescale:%u, period:%i, duty:%i, value:%u\n",
+ prescale, period_ns, duty_ns, value);
+ } else {
+ return -EINVAL;
+ }
+
+clk_dis:
+ clk_disable(pc->pwm_clk);
+ clk_disable(pc->cpt_clk);
+ return ret;
+}
+
+static int sti_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct sti_pwm_chip *pc = to_sti_pwmchip(chip);
+ struct device *dev = pc->dev;
+ int ret = 0;
+
+ /*
+ * Since we have a common enable for all PWM devices, do not enable if
+ * already enabled.
+ */
+ mutex_lock(&pc->sti_pwm_lock);
+
+ if (!pc->en_count) {
+ ret = clk_enable(pc->pwm_clk);
+ if (ret)
+ goto out;
+
+ ret = clk_enable(pc->cpt_clk);
+ if (ret)
+ goto out;
+
+ ret = regmap_field_write(pc->pwm_out_en, 1);
+ if (ret) {
+ dev_err(dev, "failed to enable PWM device %u: %d\n",
+ pwm->hwpwm, ret);
+ goto out;
+ }
+ }
+
+ pc->en_count++;
+
+out:
+ mutex_unlock(&pc->sti_pwm_lock);
+ return ret;
+}
+
+static void sti_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct sti_pwm_chip *pc = to_sti_pwmchip(chip);
+
+ mutex_lock(&pc->sti_pwm_lock);
+
+ if (--pc->en_count) {
+ mutex_unlock(&pc->sti_pwm_lock);
+ return;
+ }
+
+ regmap_field_write(pc->pwm_out_en, 0);
+
+ clk_disable(pc->pwm_clk);
+ clk_disable(pc->cpt_clk);
+
+ mutex_unlock(&pc->sti_pwm_lock);
+}
+
+static void sti_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct sti_pwm_chip *pc = to_sti_pwmchip(chip);
+
+ clear_bit(pwm->hwpwm, &pc->configured);
+}
+
+static int sti_pwm_capture(struct pwm_chip *chip, struct pwm_device *pwm,
+ struct pwm_capture *result, unsigned long timeout)
+{
+ struct sti_pwm_chip *pc = to_sti_pwmchip(chip);
+ struct sti_pwm_compat_data *cdata = pc->cdata;
+ struct sti_cpt_ddata *ddata = &cdata->ddata[pwm->hwpwm];
+ struct device *dev = pc->dev;
+ unsigned int effective_ticks;
+ unsigned long long high, low;
+ int ret;
+
+ if (pwm->hwpwm >= cdata->cpt_num_devs) {
+ dev_err(dev, "device %u is not valid\n", pwm->hwpwm);
+ return -EINVAL;
+ }
+
+ mutex_lock(&ddata->lock);
+ ddata->index = 0;
+
+ /* Prepare capture measurement */
+ regmap_write(pc->regmap, PWM_CPT_EDGE(pwm->hwpwm), CPT_EDGE_RISING);
+ regmap_field_write(pc->pwm_cpt_int_en, BIT(pwm->hwpwm));
+
+ /* Enable capture */
+ ret = regmap_field_write(pc->pwm_cpt_en, 1);
+ if (ret) {
+ dev_err(dev, "failed to enable PWM capture %u: %d\n",
+ pwm->hwpwm, ret);
+ goto out;
+ }
+
+ ret = wait_event_interruptible_timeout(ddata->wait, ddata->index > 1,
+ msecs_to_jiffies(timeout));
+
+ regmap_write(pc->regmap, PWM_CPT_EDGE(pwm->hwpwm), CPT_EDGE_DISABLED);
+
+ if (ret == -ERESTARTSYS)
+ goto out;
+
+ switch (ddata->index) {
+ case 0:
+ case 1:
+ /*
+ * Getting here could mean:
+ * - input signal is constant of less than 1 Hz
+ * - there is no input signal at all
+ *
+ * In such case the frequency is rounded down to 0
+ */
+ result->period = 0;
+ result->duty_cycle = 0;
+
+ break;
+
+ case 2:
+ /* We have everying we need */
+ high = ddata->snapshot[1] - ddata->snapshot[0];
+ low = ddata->snapshot[2] - ddata->snapshot[1];
+
+ effective_ticks = clk_get_rate(pc->cpt_clk);
+
+ result->period = (high + low) * NSEC_PER_SEC;
+ result->period /= effective_ticks;
+
+ result->duty_cycle = high * NSEC_PER_SEC;
+ result->duty_cycle /= effective_ticks;
+
+ break;
+
+ default:
+ dev_err(dev, "internal error\n");
+ break;
+ }
+
+out:
+ /* Disable capture */
+ regmap_field_write(pc->pwm_cpt_en, 0);
+
+ mutex_unlock(&ddata->lock);
+ return ret;
+}
+
+static int sti_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+ const struct pwm_state *state)
+{
+ int err;
+
+ if (state->polarity != PWM_POLARITY_NORMAL)
+ return -EINVAL;
+
+ if (!state->enabled) {
+ if (pwm->state.enabled)
+ sti_pwm_disable(chip, pwm);
+
+ return 0;
+ }
+
+ err = sti_pwm_config(pwm->chip, pwm, state->duty_cycle, state->period);
+ if (err)
+ return err;
+
+ if (!pwm->state.enabled)
+ err = sti_pwm_enable(chip, pwm);
+
+ return err;
+}
+
+static const struct pwm_ops sti_pwm_ops = {
+ .capture = sti_pwm_capture,
+ .apply = sti_pwm_apply,
+ .free = sti_pwm_free,
+ .owner = THIS_MODULE,
+};
+
+static irqreturn_t sti_pwm_interrupt(int irq, void *data)
+{
+ struct sti_pwm_chip *pc = data;
+ struct device *dev = pc->dev;
+ struct sti_cpt_ddata *ddata;
+ int devicenum;
+ unsigned int cpt_int_stat;
+ unsigned int reg;
+ int ret = IRQ_NONE;
+
+ ret = regmap_field_read(pc->pwm_cpt_int_stat, &cpt_int_stat);
+ if (ret)
+ return ret;
+
+ while (cpt_int_stat) {
+ devicenum = ffs(cpt_int_stat) - 1;
+
+ ddata = &pc->cdata->ddata[devicenum];
+
+ /*
+ * Capture input:
+ * _______ _______
+ * | | | |
+ * __| |_________________| |________
+ * ^0 ^1 ^2
+ *
+ * Capture start by the first available rising edge. When a
+ * capture event occurs, capture value (CPT_VALx) is stored,
+ * index incremented, capture edge changed.
+ *
+ * After the capture, if the index > 1, we have collected the
+ * necessary data so we signal the thread waiting for it and
+ * disable the capture by setting capture edge to none
+ */
+
+ regmap_read(pc->regmap,
+ PWM_CPT_VAL(devicenum),
+ &ddata->snapshot[ddata->index]);
+
+ switch (ddata->index) {
+ case 0:
+ case 1:
+ regmap_read(pc->regmap, PWM_CPT_EDGE(devicenum), &reg);
+ reg ^= PWM_CPT_EDGE_MASK;
+ regmap_write(pc->regmap, PWM_CPT_EDGE(devicenum), reg);
+
+ ddata->index++;
+ break;
+
+ case 2:
+ regmap_write(pc->regmap,
+ PWM_CPT_EDGE(devicenum),
+ CPT_EDGE_DISABLED);
+ wake_up(&ddata->wait);
+ break;
+
+ default:
+ dev_err(dev, "Internal error\n");
+ }
+
+ cpt_int_stat &= ~BIT_MASK(devicenum);
+
+ ret = IRQ_HANDLED;
+ }
+
+ /* Just ACK everything */
+ regmap_write(pc->regmap, PWM_INT_ACK, PWM_INT_ACK_MASK);
+
+ return ret;
+}
+
+static int sti_pwm_probe_dt(struct sti_pwm_chip *pc)
+{
+ struct device *dev = pc->dev;
+ const struct reg_field *reg_fields;
+ struct device_node *np = dev->of_node;
+ struct sti_pwm_compat_data *cdata = pc->cdata;
+ u32 num_devs;
+ int ret;
+
+ ret = of_property_read_u32(np, "st,pwm-num-chan", &num_devs);
+ if (!ret)
+ cdata->pwm_num_devs = num_devs;
+
+ ret = of_property_read_u32(np, "st,capture-num-chan", &num_devs);
+ if (!ret)
+ cdata->cpt_num_devs = num_devs;
+
+ if (!cdata->pwm_num_devs && !cdata->cpt_num_devs) {
+ dev_err(dev, "No channels configured\n");
+ return -EINVAL;
+ }
+
+ reg_fields = cdata->reg_fields;
+
+ pc->prescale_low = devm_regmap_field_alloc(dev, pc->regmap,
+ reg_fields[PWMCLK_PRESCALE_LOW]);
+ if (IS_ERR(pc->prescale_low))
+ return PTR_ERR(pc->prescale_low);
+
+ pc->prescale_high = devm_regmap_field_alloc(dev, pc->regmap,
+ reg_fields[PWMCLK_PRESCALE_HIGH]);
+ if (IS_ERR(pc->prescale_high))
+ return PTR_ERR(pc->prescale_high);
+
+ pc->pwm_out_en = devm_regmap_field_alloc(dev, pc->regmap,
+ reg_fields[PWM_OUT_EN]);
+ if (IS_ERR(pc->pwm_out_en))
+ return PTR_ERR(pc->pwm_out_en);
+
+ pc->pwm_cpt_en = devm_regmap_field_alloc(dev, pc->regmap,
+ reg_fields[PWM_CPT_EN]);
+ if (IS_ERR(pc->pwm_cpt_en))
+ return PTR_ERR(pc->pwm_cpt_en);
+
+ pc->pwm_cpt_int_en = devm_regmap_field_alloc(dev, pc->regmap,
+ reg_fields[PWM_CPT_INT_EN]);
+ if (IS_ERR(pc->pwm_cpt_int_en))
+ return PTR_ERR(pc->pwm_cpt_int_en);
+
+ pc->pwm_cpt_int_stat = devm_regmap_field_alloc(dev, pc->regmap,
+ reg_fields[PWM_CPT_INT_STAT]);
+ if (PTR_ERR_OR_ZERO(pc->pwm_cpt_int_stat))
+ return PTR_ERR(pc->pwm_cpt_int_stat);
+
+ return 0;
+}
+
+static const struct regmap_config sti_pwm_regmap_config = {
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = 4,
+};
+
+static int sti_pwm_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct sti_pwm_compat_data *cdata;
+ struct sti_pwm_chip *pc;
+ unsigned int i;
+ int irq, ret;
+
+ pc = devm_kzalloc(dev, sizeof(*pc), GFP_KERNEL);
+ if (!pc)
+ return -ENOMEM;
+
+ cdata = devm_kzalloc(dev, sizeof(*cdata), GFP_KERNEL);
+ if (!cdata)
+ return -ENOMEM;
+
+ pc->mmio = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(pc->mmio))
+ return PTR_ERR(pc->mmio);
+
+ pc->regmap = devm_regmap_init_mmio(dev, pc->mmio,
+ &sti_pwm_regmap_config);
+ if (IS_ERR(pc->regmap))
+ return PTR_ERR(pc->regmap);
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return irq;
+
+ ret = devm_request_irq(&pdev->dev, irq, sti_pwm_interrupt, 0,
+ pdev->name, pc);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Failed to request IRQ\n");
+ return ret;
+ }
+
+ /*
+ * Setup PWM data with default values: some values could be replaced
+ * with specific ones provided from Device Tree.
+ */
+ cdata->reg_fields = sti_pwm_regfields;
+ cdata->max_prescale = 0xff;
+ cdata->max_pwm_cnt = 255;
+ cdata->pwm_num_devs = 0;
+ cdata->cpt_num_devs = 0;
+
+ pc->cdata = cdata;
+ pc->dev = dev;
+ pc->en_count = 0;
+ mutex_init(&pc->sti_pwm_lock);
+
+ ret = sti_pwm_probe_dt(pc);
+ if (ret)
+ return ret;
+
+ if (cdata->pwm_num_devs) {
+ pc->pwm_clk = of_clk_get_by_name(dev->of_node, "pwm");
+ if (IS_ERR(pc->pwm_clk)) {
+ dev_err(dev, "failed to get PWM clock\n");
+ return PTR_ERR(pc->pwm_clk);
+ }
+
+ ret = clk_prepare(pc->pwm_clk);
+ if (ret) {
+ dev_err(dev, "failed to prepare clock\n");
+ return ret;
+ }
+ }
+
+ if (cdata->cpt_num_devs) {
+ pc->cpt_clk = of_clk_get_by_name(dev->of_node, "capture");
+ if (IS_ERR(pc->cpt_clk)) {
+ dev_err(dev, "failed to get PWM capture clock\n");
+ return PTR_ERR(pc->cpt_clk);
+ }
+
+ ret = clk_prepare(pc->cpt_clk);
+ if (ret) {
+ dev_err(dev, "failed to prepare clock\n");
+ return ret;
+ }
+
+ cdata->ddata = devm_kzalloc(dev, cdata->cpt_num_devs * sizeof(*cdata->ddata), GFP_KERNEL);
+ if (!cdata->ddata)
+ return -ENOMEM;
+ }
+
+ pc->chip.dev = dev;
+ pc->chip.ops = &sti_pwm_ops;
+ pc->chip.npwm = pc->cdata->pwm_num_devs;
+
+ for (i = 0; i < cdata->cpt_num_devs; i++) {
+ struct sti_cpt_ddata *ddata = &cdata->ddata[i];
+
+ init_waitqueue_head(&ddata->wait);
+ mutex_init(&ddata->lock);
+ }
+
+ ret = pwmchip_add(&pc->chip);
+ if (ret < 0) {
+ clk_unprepare(pc->pwm_clk);
+ clk_unprepare(pc->cpt_clk);
+ return ret;
+ }
+
+ platform_set_drvdata(pdev, pc);
+
+ return 0;
+}
+
+static void sti_pwm_remove(struct platform_device *pdev)
+{
+ struct sti_pwm_chip *pc = platform_get_drvdata(pdev);
+
+ pwmchip_remove(&pc->chip);
+
+ clk_unprepare(pc->pwm_clk);
+ clk_unprepare(pc->cpt_clk);
+}
+
+static const struct of_device_id sti_pwm_of_match[] = {
+ { .compatible = "st,sti-pwm", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, sti_pwm_of_match);
+
+static struct platform_driver sti_pwm_driver = {
+ .driver = {
+ .name = "sti-pwm",
+ .of_match_table = sti_pwm_of_match,
+ },
+ .probe = sti_pwm_probe,
+ .remove_new = sti_pwm_remove,
+};
+module_platform_driver(sti_pwm_driver);
+
+MODULE_AUTHOR("Ajit Pal Singh <ajitpal.singh@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics ST PWM driver");
+MODULE_LICENSE("GPL");