diff options
Diffstat (limited to 'drivers/regulator/Kconfig')
| -rw-r--r-- | drivers/regulator/Kconfig | 1666 |
1 files changed, 1666 insertions, 0 deletions
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig new file mode 100644 index 0000000000..965d4f0c18 --- /dev/null +++ b/drivers/regulator/Kconfig @@ -0,0 +1,1666 @@ +# SPDX-License-Identifier: GPL-2.0-only +menuconfig REGULATOR + bool "Voltage and Current Regulator Support" + select LINEAR_RANGES + help + Generic Voltage and Current Regulator support. + + This framework is designed to provide a generic interface to voltage + and current regulators within the Linux kernel. It's intended to + provide voltage and current control to client or consumer drivers and + also provide status information to user space applications through a + sysfs interface. + + The intention is to allow systems to dynamically control regulator + output in order to save power and prolong battery life. This applies + to both voltage regulators (where voltage output is controllable) and + current sinks (where current output is controllable). + + This framework safely compiles out if not selected so that client + drivers can still be used in systems with no software controllable + regulators. + + If unsure, say no. + + +if REGULATOR + +config REGULATOR_DEBUG + bool "Regulator debug support" + help + Say yes here to enable debugging support. + +config REGULATOR_FIXED_VOLTAGE + tristate "Fixed voltage regulator support" + help + This driver provides support for fixed voltage regulators, + useful for systems which use a combination of software + managed regulators and simple non-configurable regulators. + +config REGULATOR_VIRTUAL_CONSUMER + tristate "Virtual regulator consumer support" + help + This driver provides a virtual consumer for the voltage and + current regulator API which provides sysfs controls for + configuring the supplies requested. This is mainly useful + for test purposes. + + If unsure, say no. + +config REGULATOR_USERSPACE_CONSUMER + tristate "Userspace regulator consumer support" + help + There are some classes of devices that are controlled entirely + from user space. Userspace consumer driver provides ability to + control power supplies for such devices. + + If unsure, say no. + +config REGULATOR_88PG86X + tristate "Marvell 88PG86X voltage regulators" + depends on I2C + select REGMAP_I2C + help + This driver supports Marvell 88PG867 and 88PG868 voltage regulators. + They provide two I2C-controlled DC/DC step-down converters with + sleep mode and separate enable pins. + +config REGULATOR_88PM800 + tristate "Marvell 88PM800 Power regulators" + depends on MFD_88PM800 + help + This driver supports Marvell 88PM800 voltage regulator chips. + It delivers digitally programmable output, + the voltage is programmed via I2C interface. + It's suitable to support PXA988 chips to control VCC_MAIN and + various voltages. + +config REGULATOR_88PM8607 + tristate "Marvell 88PM8607 Power regulators" + depends on MFD_88PM860X=y + help + This driver supports 88PM8607 voltage regulator chips. + +config REGULATOR_ACT8865 + tristate "Active-semi act8865 voltage regulator" + depends on I2C + depends on POWER_SUPPLY + select REGMAP_I2C + help + This driver controls a active-semi act8865 voltage output + regulator via I2C bus. + +config REGULATOR_ACT8945A + tristate "Active-semi ACT8945A voltage regulator" + depends on MFD_ACT8945A + help + This driver controls a active-semi ACT8945A voltage regulator + via I2C bus. The ACT8945A features three step-down DC/DC converters + and four low-dropout linear regulators, along with a ActivePath + battery charger. + +config REGULATOR_AD5398 + tristate "Analog Devices AD5398/AD5821 regulators" + depends on I2C + help + This driver supports AD5398 and AD5821 current regulator chips. + If building into module, its name is ad5398.ko. + +config REGULATOR_ANATOP + tristate "Freescale i.MX on-chip ANATOP LDO regulators" + depends on ARCH_MXC || COMPILE_TEST + depends on MFD_SYSCON + help + Say y here to support Freescale i.MX on-chip ANATOP LDOs + regulators. It is recommended that this option be + enabled on i.MX6 platform. + +config REGULATOR_AAT2870 + tristate "AnalogicTech AAT2870 Regulators" + depends on MFD_AAT2870_CORE + help + If you have a AnalogicTech AAT2870 say Y to enable the + regulator driver. + +config REGULATOR_AB8500 + bool "ST-Ericsson AB8500 Power Regulators" + depends on AB8500_CORE + help + This driver supports the regulators found on the ST-Ericsson mixed + signal AB8500 PMIC + +config REGULATOR_ARIZONA_LDO1 + tristate "Cirrus Madera and Wolfson Arizona class devices LDO1" + depends on MFD_ARIZONA || MFD_MADERA + depends on SND_SOC + help + Support for the LDO1 regulators found on Cirrus Logic Madera codecs + and Wolfson Microelectronic Arizona codecs. + +config REGULATOR_ARIZONA_MICSUPP + tristate "Cirrus Madera and Wolfson Arizona class devices MICSUPP" + depends on MFD_ARIZONA || MFD_MADERA + depends on SND_SOC + help + Support for the MICSUPP regulators found on Cirrus Logic Madera codecs + and Wolfson Microelectronic Arizona codecs + devices. + +config REGULATOR_ARM_SCMI + tristate "SCMI based regulator driver" + depends on ARM_SCMI_PROTOCOL && OF + help + This adds the regulator driver support for ARM platforms using SCMI + protocol for device voltage management. + This driver uses SCMI Message Protocol driver to interact with the + firmware providing the device Voltage functionality. + +config REGULATOR_AS3711 + tristate "AS3711 PMIC" + depends on MFD_AS3711 + help + This driver provides support for the voltage regulators on the + AS3711 PMIC + +config REGULATOR_AS3722 + tristate "AMS AS3722 PMIC Regulators" + depends on MFD_AS3722 + help + This driver provides support for the voltage regulators on the + AS3722 PMIC. This will enable support for all the software + controllable DCDC/LDO regulators. + +config REGULATOR_ATC260X + tristate "Actions Semi ATC260x PMIC Regulators" + depends on MFD_ATC260X + help + This driver provides support for the voltage regulators on the + ATC260x PMICs. This will enable support for all the software + controllable DCDC/LDO regulators. + +config REGULATOR_AW37503 + tristate "Awinic AW37503 Dual Output Power regulators" + depends on I2C && GPIOLIB + select REGMAP_I2C + help + This driver supports AW37503 single inductor - dual output + power supply specifically designed for display panels. + +config REGULATOR_AXP20X + tristate "X-POWERS AXP20X PMIC Regulators" + depends on MFD_AXP20X + help + This driver provides support for the voltage regulators on the + AXP20X PMIC. + +config REGULATOR_BCM590XX + tristate "Broadcom BCM590xx PMU Regulators" + depends on MFD_BCM590XX + help + This driver provides support for the voltage regulators on the + BCM590xx PMUs. This will enable support for the software + controllable LDO/Switching regulators. + +config REGULATOR_BD71815 + tristate "ROHM BD71815 Power Regulator" + depends on MFD_ROHM_BD71828 + select REGULATOR_ROHM + help + This driver supports voltage regulators on ROHM BD71815 PMIC. + This will enable support for the software controllable buck + and LDO regulators and a current regulator for LEDs. + + This driver can also be built as a module. If so, the module + will be called bd71815-regulator. + +config REGULATOR_BD71828 + tristate "ROHM BD71828 Power Regulator" + depends on MFD_ROHM_BD71828 + select REGULATOR_ROHM + help + This driver supports voltage regulators on ROHM BD71828 PMIC. + This will enable support for the software controllable buck + and LDO regulators. + + This driver can also be built as a module. If so, the module + will be called bd71828-regulator. + +config REGULATOR_BD718XX + tristate "ROHM BD71837 Power Regulator" + depends on MFD_ROHM_BD718XX + select REGULATOR_ROHM + help + This driver supports voltage regulators on ROHM BD71837 PMIC. + This will enable support for the software controllable buck + and LDO regulators. + + This driver can also be built as a module. If so, the module + will be called bd718x7-regulator. + +config REGULATOR_BD9571MWV + tristate "ROHM BD9571MWV Regulators" + depends on MFD_BD9571MWV + help + This driver provides support for the voltage regulators on the + ROHM BD9571MWV PMIC. This will enable support for the software + controllable regulator and voltage sampling units. + + This driver can also be built as a module. If so, the module + will be called bd9571mwv-regulator. + +config REGULATOR_BD957XMUF + tristate "ROHM BD9576MUF and BD9573MUF Regulators" + depends on MFD_ROHM_BD957XMUF + help + This driver supports voltage regulators on ROHM BD9576MUF and + BD9573MUF PMICs. + + This driver can also be built as a module. If so, the module + will be called bd9576-regulator. + +config REGULATOR_CPCAP + tristate "Motorola CPCAP regulator" + depends on MFD_CPCAP + help + Say y here for CPCAP regulator found on some Motorola phones + and tablets such as Droid 4. + +config REGULATOR_CROS_EC + tristate "ChromeOS EC regulators" + depends on CROS_EC && OF + help + This driver supports voltage regulators that is connected to ChromeOS + EC and controlled through EC host commands. + + This driver can also be built as a module. If so, the module + will be called cros-ec-regulator. + +config REGULATOR_DA903X + tristate "Dialog Semiconductor DA9030/DA9034 regulators" + depends on PMIC_DA903X + depends on !CC_IS_CLANG # https://bugs.llvm.org/show_bug.cgi?id=38789 + help + Say y here to support the BUCKs and LDOs regulators found on + Dialog Semiconductor DA9030/DA9034 PMIC. + +config REGULATOR_DA9052 + tristate "Dialog Semiconductor DA9052/DA9053 regulators" + depends on PMIC_DA9052 + help + This driver supports the voltage regulators of DA9052-BC and + DA9053-AA/Bx PMIC. + +config REGULATOR_DA9055 + tristate "Dialog Semiconductor DA9055 regulators" + depends on MFD_DA9055 + help + Say y here to support the BUCKs and LDOs regulators found on + Dialog Semiconductor DA9055 PMIC. + + This driver can also be built as a module. If so, the module + will be called da9055-regulator. + +config REGULATOR_DA9062 + tristate "Dialog Semiconductor DA9061/62 regulators" + depends on MFD_DA9062 + help + Say y here to support the BUCKs and LDOs regulators found on + DA9061 and DA9062 PMICs. + + This driver can also be built as a module. If so, the module + will be called da9062-regulator. + +config REGULATOR_DA9063 + tristate "Dialog Semiconductor DA9063 regulators" + depends on MFD_DA9063 && OF + help + Say y here to support the BUCKs and LDOs regulators found on + DA9063 PMICs. + + This driver can also be built as a module. If so, the module + will be called da9063-regulator. + +config REGULATOR_DA9121 + tristate "Dialog Semiconductor DA9121/DA9122/DA9220/DA9217/DA9130/DA9131/DA9132 regulator" + depends on I2C && OF + select REGMAP_I2C + help + Say y here to support for the Dialog Semiconductor DA9121. The + DA9121 is a single channel dual-phase buck converter controlled + through an I2C interface. + + DA9121 Single-channel dual-phase 10A buck converter + DA9130 Single-channel dual-phase 10A buck converter (Automotive) + DA9217 Single-channel dual-phase 6A buck converter + DA9122 Dual-channel single-phase 5A buck converter + DA9131 Dual-channel single-phase 5A buck converter (Automotive) + DA9220 Dual-channel single-phase 3A buck converter + DA9132 Dual-channel single-phase 3A buck converter (Automotive) + + This driver can also be built as a module. If so, the module + will be called da9121-regulator. + +config REGULATOR_DA9210 + tristate "Dialog Semiconductor DA9210 regulator" + depends on I2C + select REGMAP_I2C + help + Say y here to support for the Dialog Semiconductor DA9210. + The DA9210 is a multi-phase synchronous step down + converter 12A DC-DC Buck controlled through an I2C + interface. + +config REGULATOR_DA9211 + tristate "Dialog Semiconductor DA9211/DA9212/DA9213/DA9223/DA9214/DA9224/DA9215/DA9225 regulator" + depends on I2C + select REGMAP_I2C + help + Say y here to support for the Dialog Semiconductor DA9211/DA9212 + /DA9213/DA9214/DA9215. + The DA9211/DA9212/DA9213/DA9214/DA9215 is a multi-phase synchronous + step down converter 12A or 16A DC-DC Buck controlled through an I2C + interface. + +config REGULATOR_DBX500_PRCMU + bool + +config REGULATOR_DB8500_PRCMU + bool "ST-Ericsson DB8500 Voltage Domain Regulators" + depends on MFD_DB8500_PRCMU + select REGULATOR_DBX500_PRCMU + help + This driver supports the voltage domain regulators controlled by the + DB8500 PRCMU + +config REGULATOR_FAN53555 + tristate "Fairchild FAN53555 Regulator" + depends on I2C + select REGMAP_I2C + help + This driver supports Fairchild FAN53555 Digitally Programmable + TinyBuck Regulator. The FAN53555 is a step-down switching voltage + regulator that delivers a digitally programmable output from an + input voltage supply of 2.5V to 5.5V. The output voltage is + programmed through an I2C interface. + +config REGULATOR_FAN53880 + tristate "Fairchild FAN53880 Regulator" + depends on I2C && OF + select REGMAP_I2C + help + This driver supports Fairchild (ON Semiconductor) FAN53880 + regulator. The regulator is a programmable power management IC + (PMIC), it is controlled by I2C and provides one BUCK, one BOOST + and four LDO outputs. + +config REGULATOR_GPIO + tristate "GPIO regulator support" + depends on GPIOLIB || COMPILE_TEST + help + This driver provides support for regulators that can be + controlled via gpios. + It is capable of supporting current and voltage regulators + and the platform has to provide a mapping of GPIO-states + to target volts/amps. + +config REGULATOR_HI6421 + tristate "HiSilicon Hi6421 PMIC voltage regulator support" + depends on MFD_HI6421_PMIC && OF + help + This driver provides support for the voltage regulators on the + HiSilicon Hi6421 PMU / Codec IC. + Hi6421 is a multi-function device which, on regulator part, provides + 21 general purpose LDOs, 3 dedicated LDOs, and 5 BUCKs. All + of them come with support to either ECO (idle) or sleep mode. + +config REGULATOR_HI6421V530 + tristate "HiSilicon Hi6421v530 PMIC voltage regulator support" + depends on MFD_HI6421_PMIC && OF + help + This driver provides support for the voltage regulators on + HiSilicon Hi6421v530 PMU / Codec IC. + Hi6421v530 is a multi-function device which, on regulator part, + provides 5 general purpose LDOs, and all of them come with support + to either ECO (idle) or sleep mode. + +config REGULATOR_HI655X + tristate "Hisilicon HI655X PMIC regulators support" + depends on ARCH_HISI || COMPILE_TEST + depends on MFD_HI655X_PMIC && OF + help + This driver provides support for the voltage regulators of the + Hisilicon Hi655x PMIC device. + +config REGULATOR_HI6421V600 + tristate "HiSilicon Hi6421v600 PMIC voltage regulator support" + depends on MFD_HI6421_SPMI && OF + select REGMAP + help + This driver provides support for the voltage regulators on + HiSilicon Hi6421v600 PMU / Codec IC. + This is used on Kirin 3670 boards, like HiKey 970. + +config REGULATOR_ISL9305 + tristate "Intersil ISL9305 regulator" + depends on I2C + select REGMAP_I2C + help + This driver supports ISL9305 voltage regulator chip. + +config REGULATOR_ISL6271A + tristate "Intersil ISL6271A Power regulator" + depends on I2C + help + This driver supports ISL6271A voltage regulator chip. + +config REGULATOR_LM363X + tristate "TI LM363X voltage regulators" + depends on MFD_TI_LMU + help + This driver supports LM3631, LM3632 and LM36274 voltage regulators for + the LCD bias. + One boost output voltage is configurable and always on. + Other LDOs are used for the display module. + +config REGULATOR_LOCHNAGAR + tristate "Cirrus Logic Lochnagar regulator driver" + depends on MFD_LOCHNAGAR + help + This enables regulator support on the Cirrus Logic Lochnagar audio + development board. + +config REGULATOR_LP3971 + tristate "National Semiconductors LP3971 PMIC regulator driver" + depends on I2C + help + Say Y here to support the voltage regulators and convertors + on National Semiconductors LP3971 PMIC + +config REGULATOR_LP3972 + tristate "National Semiconductors LP3972 PMIC regulator driver" + depends on I2C + help + Say Y here to support the voltage regulators and convertors + on National Semiconductors LP3972 PMIC + +config REGULATOR_LP872X + tristate "TI/National Semiconductor LP8720/LP8725 voltage regulators" + depends on I2C + select REGMAP_I2C + help + This driver supports LP8720/LP8725 PMIC + +config REGULATOR_LP873X + tristate "TI LP873X Power regulators" + depends on MFD_TI_LP873X && OF + help + This driver supports LP873X voltage regulator chips. LP873X + provides two step-down converters and two general-purpose LDO + voltage regulators. It supports software based voltage control + for different voltage domains + +config REGULATOR_LP8755 + tristate "TI LP8755 High Performance PMU driver" + depends on I2C + select REGMAP_I2C + help + This driver supports LP8755 High Performance PMU driver. This + chip contains six step-down DC/DC converters which can support + 9 mode multiphase configuration. + +config REGULATOR_LP87565 + tristate "TI LP87565 Power regulators" + depends on MFD_TI_LP87565 && OF + help + This driver supports LP87565 voltage regulator chips. LP87565 + provides four step-down converters. It supports software based + voltage control for different voltage domains + +config REGULATOR_LP8788 + tristate "TI LP8788 Power Regulators" + depends on MFD_LP8788 + help + This driver supports LP8788 voltage regulator chip. + +config REGULATOR_LTC3589 + tristate "LTC3589 8-output voltage regulator" + depends on I2C + select REGMAP_I2C + help + This enables support for the LTC3589, LTC3589-1, and LTC3589-2 + 8-output regulators controlled via I2C. + +config REGULATOR_LTC3676 + tristate "LTC3676 8-output voltage regulator" + depends on I2C + select REGMAP_I2C + help + This enables support for the LTC3676 + 8-output regulators controlled via I2C. + +config REGULATOR_MAX14577 + tristate "Maxim 14577/77836 regulator" + depends on MFD_MAX14577 + help + This driver controls a Maxim MAX14577/77836 regulator via I2C bus. + The MAX14577 regulators include safeout LDO and charger current + regulator. The MAX77836 has two additional LDOs. + +config REGULATOR_MAX1586 + tristate "Maxim 1586/1587 voltage regulator" + depends on I2C + help + This driver controls a Maxim 1586 or 1587 voltage output + regulator via I2C bus. The provided regulator is suitable + for PXA27x chips to control VCC_CORE and VCC_USIM voltages. + +config REGULATOR_MAX5970 + tristate "Maxim 5970/5978 power switch and monitor" + depends on I2C + depends on OF + depends on MFD_MAX5970 + help + This driver controls a Maxim 5970/5978 switch via I2C bus. + The MAX5970/5978 is a smart switch with no output regulation, but + fault protection and voltage and current monitoring capabilities. + +config REGULATOR_MAX77541 + tristate "Analog Devices MAX77541/77540 Regulator" + depends on MFD_MAX77541 + help + This driver controls a Analog Devices MAX77541/77540 regulators + via I2C bus. Both MAX77540 and MAX77541 are dual-phase + high-efficiency buck converter. Say Y here to + enable the regulator driver. + Say M here if you want to include support for the regulator as a + module. + +config REGULATOR_MAX77620 + tristate "Maxim 77620/MAX20024 voltage regulator" + depends on MFD_MAX77620 || COMPILE_TEST + help + This driver controls Maxim MAX77620 voltage output regulator + via I2C bus. The provided regulator is suitable for Tegra + chip to control Step-Down DC-DC and LDOs. Say Y here to + enable the regulator driver. + +config REGULATOR_MAX77650 + tristate "Maxim MAX77650/77651 regulator support" + depends on MFD_MAX77650 || COMPILE_TEST + help + Regulator driver for MAX77650/77651 PMIC from Maxim + Semiconductor. This device has a SIMO with three independent + power rails and an LDO. + +config REGULATOR_MAX77857 + tristate "ADI MAX77857/MAX77831 regulator support" + depends on I2C + select REGMAP_I2C + help + This driver controls a ADI MAX77857 and MAX77831 regulators. + via I2C bus. MAX77857 and MAX77831 are high efficiency buck-boost + converters with input voltage range (2.5V to 16V). Say Y here to + enable the regulator driver + +config REGULATOR_MAX8649 + tristate "Maxim 8649 voltage regulator" + depends on I2C + select REGMAP_I2C + help + This driver controls a Maxim 8649 voltage output regulator via + I2C bus. + +config REGULATOR_MAX8660 + tristate "Maxim 8660/8661 voltage regulator" + depends on I2C + help + This driver controls a Maxim 8660/8661 voltage output + regulator via I2C bus. + +config REGULATOR_MAX8893 + tristate "Maxim 8893 voltage regulator" + depends on I2C + select REGMAP_I2C + help + This driver controls a Maxim 8893 voltage output + regulator via I2C bus. + +config REGULATOR_MAX8907 + tristate "Maxim 8907 voltage regulator" + depends on MFD_MAX8907 || COMPILE_TEST + help + This driver controls a Maxim 8907 voltage output regulator + via I2C bus. The provided regulator is suitable for Tegra + chip to control Step-Down DC-DC and LDOs. + +config REGULATOR_MAX8925 + tristate "Maxim MAX8925 Power Management IC" + depends on MFD_MAX8925 + help + Say y here to support the voltage regulator of Maxim MAX8925 PMIC. + +config REGULATOR_MAX8952 + tristate "Maxim MAX8952 Power Management IC" + depends on I2C + help + This driver controls a Maxim 8952 voltage output regulator + via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS + modes ranging from 0.77V to 1.40V by 0.01V steps. + +config REGULATOR_MAX8973 + tristate "Maxim MAX8973A voltage regulator" + depends on I2C + depends on THERMAL && THERMAL_OF + select REGMAP_I2C + help + The MAXIM MAX8973A high-efficiency. three phase, DC-DC step-down + switching regulator delivers up to 9A of output current. Each + phase operates at a 2MHz fixed frequency with a 120 deg shift + from the adjacent phase, allowing the use of small magnetic component. + +config REGULATOR_MAX8997 + tristate "Maxim 8997/8966 regulator" + depends on MFD_MAX8997 + help + This driver controls a Maxim 8997/8966 regulator + via I2C bus. The provided regulator is suitable for S5PC110, + S5PV210, and Exynos-4 chips to control VCC_CORE and + VCC_USIM voltages. + +config REGULATOR_MAX8998 + tristate "Maxim 8998 voltage regulator" + depends on MFD_MAX8998 + help + This driver controls a Maxim 8998 voltage output regulator + via I2C bus. The provided regulator is suitable for S3C6410 + and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages. + +config REGULATOR_MAX20086 + tristate "Maxim MAX20086-MAX20089 Camera Power Protectors" + depends on I2C + select REGMAP_I2C + help + This driver controls a Maxim MAX20086-MAX20089 camera power + protectorvia I2C bus. The regulator has 2 or 4 outputs depending on + the device model. This driver is only capable to turn on/off them. + +config REGULATOR_MAX20411 + tristate "Maxim MAX20411 High-Efficiency Single Step-Down Converter" + depends on I2C + select REGMAP_I2C + help + This driver controls the Maxim MAX20411 family of high-efficiency, + syncrhonous step-down converters. + +config REGULATOR_MAX77686 + tristate "Maxim 77686 regulator" + depends on MFD_MAX77686 || COMPILE_TEST + help + This driver controls a Maxim 77686 regulator + via I2C bus. The provided regulator is suitable for + Exynos-4 chips to control VARM and VINT voltages. + +config REGULATOR_MAX77693 + tristate "Maxim 77693/77843 regulator" + depends on MFD_MAX77693 || MFD_MAX77843 || COMPILE_TEST + help + This driver controls a Maxim 77693/77843 regulators via I2C bus. + The regulators include two LDOs, 'SAFEOUT1', 'SAFEOUT2' + and one current regulator 'CHARGER'. This is suitable for + Exynos-4x12 (MAX77693) or Exynos5433 (MAX77843) SoC chips. + +config REGULATOR_MAX77802 + tristate "Maxim 77802 regulator" + depends on MFD_MAX77686 || COMPILE_TEST + help + This driver controls a Maxim 77802 regulator + via I2C bus. The provided regulator is suitable for + Exynos5420/Exynos5800 SoCs to control various voltages. + It includes support for control of voltage and ramp speed. + +config REGULATOR_MAX77826 + tristate "Maxim 77826 regulator" + depends on I2C + select REGMAP_I2C + help + This driver controls a Maxim 77826 regulator via I2C bus. + The regulator include 15 LDOs, BUCK and BUCK BOOST regulator. + It includes support for control of output voltage. This + regulator is found on the Samsung Galaxy S5 (klte) smartphone. + +config REGULATOR_MC13XXX_CORE + tristate + +config REGULATOR_MC13783 + tristate "Freescale MC13783 regulator driver" + depends on MFD_MC13XXX + select REGULATOR_MC13XXX_CORE + help + Say y here to support the regulators found on the Freescale MC13783 + PMIC. + +config REGULATOR_MC13892 + tristate "Freescale MC13892 regulator driver" + depends on MFD_MC13XXX + select REGULATOR_MC13XXX_CORE + help + Say y here to support the regulators found on the Freescale MC13892 + PMIC. + +config REGULATOR_MCP16502 + tristate "Microchip MCP16502 PMIC" + depends on I2C && OF + select REGMAP_I2C + help + Say y here to support the MCP16502 PMIC. This driver supports + basic operations (get/set voltage, get/set operating mode) + through the regulator interface. In addition it enables + suspend-to-ram/standby transition. + +config REGULATOR_MP5416 + tristate "Monolithic MP5416 PMIC" + depends on I2C && OF + select REGMAP_I2C + help + Say y here to support the MP5416 PMIC. This will enable supports + the software controllable 4 buck and 4 LDO regulators. + Say M here if you want to include support for the regulator as a + module. + +config REGULATOR_MP8859 + tristate "MPS MP8859 regulator driver" + depends on I2C + select REGMAP_I2C + help + Say y here to support the MP8859 voltage regulator. This driver + supports basic operations (get/set voltage) through the regulator + interface. + Say M here if you want to include support for the regulator as a + module. The module will be named "mp8859". + +config REGULATOR_MP886X + tristate "MPS MP8869 regulator driver" + depends on I2C && OF + select REGMAP_I2C + help + This driver supports the MP8869 voltage regulator. + +config REGULATOR_MPQ7920 + tristate "Monolithic MPQ7920 PMIC" + depends on I2C && OF + select REGMAP_I2C + help + Say y here to support the MPQ7920 PMIC. This will enable supports + the software controllable 4 buck and 5 LDO regulators. + This driver supports the control of different power rails of device + through regulator interface. + +config REGULATOR_MT6311 + tristate "MediaTek MT6311 PMIC" + depends on I2C + select REGMAP_I2C + help + Say y here to select this option to enable the power regulator of + MediaTek MT6311 PMIC. + This driver supports the control of different power rails of device + through regulator interface. + +config REGULATOR_MT6315 + tristate "MediaTek MT6315 PMIC" + depends on SPMI + select REGMAP_SPMI + help + Say y here to select this option to enable the power regulator of + MediaTek MT6315 PMIC. + This driver supports the control of different power rails of device + through regulator interface. + +config REGULATOR_MT6323 + tristate "MediaTek MT6323 PMIC" + depends on MFD_MT6397 + help + Say y here to select this option to enable the power regulator of + MediaTek MT6323 PMIC. + This driver supports the control of different power rails of device + through regulator interface. + +config REGULATOR_MT6331 + tristate "MediaTek MT6331 PMIC" + depends on MFD_MT6397 + help + Say y here to select this option to enable the power regulator of + MediaTek MT6331 PMIC. + This driver supports the control of different power rails of device + through regulator interface + +config REGULATOR_MT6332 + tristate "MediaTek MT6332 PMIC" + depends on MFD_MT6397 + help + Say y here to select this option to enable the power regulator of + MediaTek MT6332 PMIC. + This driver supports the control of different power rails of device + through regulator interface + +config REGULATOR_MT6357 + tristate "MediaTek MT6357 PMIC" + depends on MFD_MT6397 + help + Say y here to select this option to enable the power regulator of + MediaTek MT6357 PMIC. + This driver supports the control of different power rails of device + through regulator interface. + +config REGULATOR_MT6358 + tristate "MediaTek MT6358 PMIC" + depends on MFD_MT6397 + help + Say y here to select this option to enable the power regulator of + MediaTek MT6358 PMIC. + This driver supports the control of different power rails of device + through regulator interface. + +config REGULATOR_MT6359 + tristate "MediaTek MT6359 PMIC" + depends on MFD_MT6397 + help + Say y here to select this option to enable the power regulator of + MediaTek MT6359 PMIC. + This driver supports the control of different power rails of device + through regulator interface. + +config REGULATOR_MT6360 + tristate "MT6360 SubPMIC Regulator" + depends on MFD_MT6360 + help + Say Y here to enable MT6360 regulator support. + This is support MT6360 PMIC/LDO part include + 2-channel buck with Thermal Shutdown and Overload Protection + 6-channel High PSRR and Low Dropout LDO. + +config REGULATOR_MT6370 + tristate "MT6370 SubPMIC Regulator" + depends on MFD_MT6370 + help + Say Y here to enable MT6370 regulator support. + This driver supports the control for DisplayBias voltages and one + general purpose LDO which is commonly used to drive the vibrator. + +config REGULATOR_MT6380 + tristate "MediaTek MT6380 PMIC" + depends on MTK_PMIC_WRAP + help + Say y here to select this option to enable the power regulator of + MediaTek MT6380 PMIC. + This driver supports the control of different power rails of device + through regulator interface. + +config REGULATOR_MT6397 + tristate "MediaTek MT6397 PMIC" + depends on MFD_MT6397 + help + Say y here to select this option to enable the power regulator of + MediaTek MT6397 PMIC. + This driver supports the control of different power rails of device + through regulator interface. + +config REGULATOR_MTK_DVFSRC + tristate "MediaTek DVFSRC regulator driver" + depends on MTK_DVFSRC + help + Say y here to control regulator by DVFSRC (dynamic voltage + and frequency scaling resource collector). + This driver supports to control regulators via the DVFSRC + of Mediatek. It allows for voting on regulator state + between multiple users. + +config REGULATOR_PALMAS + tristate "TI Palmas PMIC Regulators" + depends on MFD_PALMAS + help + If you wish to control the regulators on the Palmas series of + chips say Y here. This will enable support for all the software + controllable SMPS/LDO regulators. + + The regulators available on Palmas series chips vary depending + on the muxing. This is handled automatically in the driver by + reading the mux info from OTP. + +config REGULATOR_PBIAS + tristate "PBIAS OMAP regulator driver" + depends on (ARCH_OMAP || COMPILE_TEST) && MFD_SYSCON + help + Say y here to support pbias regulator for mmc1:SD card i/o + on OMAP SoCs. + This driver provides support for OMAP pbias modelled + regulators. + +config REGULATOR_PCA9450 + tristate "NXP PCA9450A/PCA9450B/PCA9450C regulator driver" + depends on I2C + select REGMAP_I2C + help + Say y here to support the NXP PCA9450A/PCA9450B/PCA9450C PMIC + regulator driver. + +config REGULATOR_PCAP + tristate "Motorola PCAP2 regulator driver" + depends on EZX_PCAP + help + This driver provides support for the voltage regulators of the + PCAP2 PMIC. + +config REGULATOR_PCF50633 + tristate "NXP PCF50633 regulator driver" + depends on MFD_PCF50633 + help + Say Y here to support the voltage regulators and converters + on PCF50633 + +config REGULATOR_PF8X00 + tristate "NXP PF8100/PF8121A/PF8200 regulator driver" + depends on I2C && OF + select REGMAP_I2C + help + Say y here to support the regulators found on the NXP + PF8100/PF8121A/PF8200 PMIC. + + Say M here if you want to support for the regulators found + on the NXP PF8100/PF8121A/PF8200 PMIC. The module will be named + "pf8x00-regulator". + +config REGULATOR_PFUZE100 + tristate "Freescale PFUZE100/200/3000/3001 regulator driver" + depends on I2C && OF + select REGMAP_I2C + help + Say y here to support the regulators found on the Freescale + PFUZE100/200/3000/3001 PMIC. + +config REGULATOR_PV88060 + tristate "Powerventure Semiconductor PV88060 regulator" + depends on I2C + select REGMAP_I2C + help + Say y here to support the voltage regulators and convertors + PV88060 + +config REGULATOR_PV88080 + tristate "Powerventure Semiconductor PV88080 regulator" + depends on I2C + select REGMAP_I2C + help + Say y here to support the buck convertors on PV88080 + +config REGULATOR_PV88090 + tristate "Powerventure Semiconductor PV88090 regulator" + depends on I2C + select REGMAP_I2C + help + Say y here to support the voltage regulators and convertors + on PV88090 + +config REGULATOR_PWM + tristate "PWM voltage regulator" + depends on PWM + help + This driver supports PWM controlled voltage regulators. PWM + duty cycle can increase or decrease the voltage. + +config REGULATOR_QCOM_REFGEN + tristate "Qualcomm REFGEN regulator driver" + depends on ARCH_QCOM || COMPILE_TEST + depends on HAS_IOMEM + depends on REGMAP + help + This driver supports the MMIO-mapped reference voltage regulator, + used internally by some PHYs on many Qualcomm SoCs. + + Say M here if you want to include support for this regulator as + a module. The module will be named "qcom-refgen-regulator". + +config REGULATOR_QCOM_RPM + tristate "Qualcomm RPM regulator driver" + depends on MFD_QCOM_RPM + help + If you say yes to this option, support will be included for the + regulators exposed by the Resource Power Manager found in Qualcomm + 8660, 8960 and 8064 based devices. + + Say M here if you want to include support for the regulators on the + Qualcomm RPM as a module. The module will be named + "qcom_rpm-regulator". + +config REGULATOR_QCOM_RPMH + tristate "Qualcomm Technologies, Inc. RPMh regulator driver" + depends on QCOM_RPMH || (QCOM_RPMH=n && COMPILE_TEST) + depends on QCOM_COMMAND_DB || (QCOM_COMMAND_DB=n && COMPILE_TEST) + help + This driver supports control of PMIC regulators via the RPMh hardware + block found on Qualcomm Technologies Inc. SoCs. RPMh regulator + control allows for voting on regulator state between multiple + processors within the SoC. + +config REGULATOR_QCOM_SMD_RPM + tristate "Qualcomm SMD based RPM regulator driver" + depends on QCOM_SMD_RPM + help + If you say yes to this option, support will be included for the + regulators exposed by the Resource Power Manager found in Qualcomm + 8974 based devices. + + Say M here if you want to include support for the regulators on the + Qualcomm RPM as a module. The module will be named + "qcom_smd-regulator". + +config REGULATOR_QCOM_SPMI + tristate "Qualcomm SPMI regulator driver" + depends on SPMI || COMPILE_TEST + help + If you say yes to this option, support will be included for the + regulators found in Qualcomm SPMI PMICs. + + Say M here if you want to include support for the regulators on the + Qualcomm SPMI PMICs as a module. The module will be named + "qcom_spmi-regulator". + +config REGULATOR_QCOM_USB_VBUS + tristate "Qualcomm USB Vbus regulator driver" + depends on SPMI || COMPILE_TEST + help + If you say yes to this option, support will be included for the + regulator used to enable the VBUS output. + + Say M here if you want to include support for enabling the VBUS output + as a module. The module will be named "qcom_usb_vbus_regulator". + +config REGULATOR_RAA215300 + tristate "Renesas RAA215300 driver" + select REGMAP_I2C + depends on COMMON_CLK + depends on I2C + help + If you say yes to this option, support will be included for the + Renesas RAA215300 PMIC. + + Say M here if you want to include support for Renesas RAA215300 PMIC + as a module. The module will be named "raa215300". + +config REGULATOR_RASPBERRYPI_TOUCHSCREEN_ATTINY + tristate "Raspberry Pi 7-inch touchscreen panel ATTINY regulator" + depends on BACKLIGHT_CLASS_DEVICE + depends on I2C + depends on OF_GPIO + select REGMAP_I2C + help + This driver supports ATTINY regulator on the Raspberry Pi 7-inch + touchscreen unit. The regulator is used to enable power to the + TC358762, display and to control backlight. + +config REGULATOR_RC5T583 + tristate "RICOH RC5T583 Power regulators" + depends on MFD_RC5T583 + help + Select this option to enable the power regulator of RICOH + PMIC RC5T583. + This driver supports the control of different power rails of device + through regulator interface. The device supports multiple DCDC/LDO + outputs which can be controlled by i2c communication. + +config REGULATOR_RK808 + tristate "Rockchip RK805/RK808/RK809/RK817/RK818 Power regulators" + depends on MFD_RK8XX + help + Select this option to enable the power regulator of ROCKCHIP + PMIC RK805,RK809&RK817,RK808 and RK818. + This driver supports the control of different power rails of device + through regulator interface. The device supports multiple DCDC/LDO + outputs which can be controlled by i2c communication. + +config REGULATOR_RN5T618 + tristate "Ricoh RN5T567/618 voltage regulators" + depends on MFD_RN5T618 + help + Say y here to support the regulators found on Ricoh RN5T567, + RN5T618 or RC5T619 PMIC. + +config REGULATOR_ROHM + tristate + +config REGULATOR_RT4801 + tristate "Richtek RT4801 Regulators" + depends on I2C + select REGMAP_I2C + help + This adds support for voltage regulators in Richtek RT4801 Display Bias IC. + The device supports two regulators (DSVP/DSVN). + +config REGULATOR_RT4803 + tristate "Richtek RT4803 boost regualtor" + depends on I2C + select REGMAP_I2C + help + This adds support for RT4803 boost converter that integrates the + bypass switch. If the input voltage is low than the required voltage, + RT4803 will enter boost mode. Otherwise, enable internal bypass + switch to enter bypass mode. + +config REGULATOR_RT4831 + tristate "Richtek RT4831 DSV Regulators" + depends on MFD_RT4831 + help + This adds support for voltage regulators in Richtek RT4831. + There are three regulators (VLCM/DSVP/DSVN). + VLCM is a virtual voltage input for DSVP/DSVN inside IC. + And DSVP/DSVN is the real Vout range from 4V to 6.5V. + It's common used to provide the power for the display panel. + +config REGULATOR_RT5033 + tristate "Richtek RT5033 Regulators" + depends on MFD_RT5033 + help + This adds support for voltage and current regulators in Richtek + RT5033 PMIC. The device supports multiple regulators like + current source, LDO and Buck. + +config REGULATOR_RT5120 + tristate "Richtek RT5120 PMIC Regulators" + depends on MFD_RT5120 + help + This adds support for voltage regulator in Richtek RT5120 PMIC. + It integrates 4 channels buck controller, 1 channel LDO, 1 EXTEN + to control external power source. Only BUCK1 is adjustable from + 600mV to 1395mV, per step 6.250mV. The others are all fixed voltage + by external hardware circuit. + +config REGULATOR_RT5190A + tristate "Richtek RT5190A PMIC" + depends on I2C + select REGMAP_I2C + help + This adds support for voltage regulator in Richtek RT5190A PMIC. + It integratas 1 channel buck controller, 3 channels high efficiency + buck converters, 1 LDO, mute AC OFF depop function, with the general + I2C control interface. + +config REGULATOR_RT5739 + tristate "Richtek RT5739 Regulator" + depends on I2C + select REGMAP_I2C + help + This adds support for voltage regulator in Richtek RT5739. + It's a step-down switching voltage regulator. Using a proprietary + architecture with synchronous rectification, it is capable of + delivering 3.5A continuously at over 80% efficiency. + + This driver can also be built as a module. If so, the module + will be called rt5739. + +config REGULATOR_RT5759 + tristate "Richtek RT5759 Regulator" + depends on I2C + select REGMAP_I2C + help + This adds support for voltage regulator in Richtek RT5759. + The RT5759 is a high-performance, synchronous step-down DC-DC + converter that can deliver up to 9A output current from 3V to 6.5V + input supply. + +config REGULATOR_RT6160 + tristate "Richtek RT6160 BuckBoost voltage regulator" + depends on I2C + select REGMAP_I2C + help + This adds support for voltage regulator in Richtek RT6160. + This device automatically change voltage output mode from + Buck or Boost. The mode transition depend on the input source voltage. + The wide output range is from 2025mV to 5200mV and can be used on most + common application scenario. + +config REGULATOR_RT6190 + tristate "Richtek RT6190 4-Switch BuckBoost controller" + depends on I2C + select REGMAP_I2C + help + The RT6190 is a 4-Switch BuckBoost controller designed for converting + input voltage to output voltage that can be equal to, higher or lower + than input voltage. It operates with wide input voltage range from + 4.5V to 36V, and the output voltage can be set from 3V to 36V by + external FB pin. + +config REGULATOR_RT6245 + tristate "Richtek RT6245 voltage regulator" + depends on I2C + select REGMAP_I2C + help + This adds support for Richtek RT6245 voltage regulator. + It can support up to 14A output current and adjustable output voltage + from 0.4375V to 1.3875V, per step 12.5mV. + +config REGULATOR_RTQ2134 + tristate "Richtek RTQ2134 SubPMIC Regulator" + depends on I2C + select REGMAP_I2C + help + This driver adds support for RTQ2134 SubPMIC regulators. + The RTQ2134 is a multi-phase, programmable power management IC that + integrate with four high efficient, synchronous step-down converter + cores. It features wide output voltage range and the capability to + configure the corresponding power stages. + +config REGULATOR_RTMV20 + tristate "Richtek RTMV20 Laser Diode Regulator" + depends on I2C + select REGMAP_I2C + help + This driver adds support for the load switch current regulator on + the Richtek RTMV20. It can support the load current up to 6A and + integrate strobe/vsync/fsin signal to synchronize the IR camera. + +config REGULATOR_RTQ6752 + tristate "Richtek RTQ6752 TFT LCD voltage regulator" + depends on I2C + select REGMAP_I2C + help + This driver adds support for Richtek RTQ6752. RTQ6752 includes two + synchronous boost converters for PAVDD, and one synchronous NAVDD + buck-boost. This device is suitable for automotive TFT-LCD panel. + +config REGULATOR_RTQ2208 + tristate "Richtek RTQ2208 SubPMIC Regulator" + depends on I2C + select REGMAP_I2C + help + This driver adds support for RTQ2208 SubPMIC regulators. + The RTQ2208 is a multi-phase, programmable power management IC that + integrate with dual multi-configurable, synchronous buck converters + and two ldos. It features wide output voltage range from 0.4V to 2.05V + and the capability to configure the corresponding power stages. + +config REGULATOR_S2MPA01 + tristate "Samsung S2MPA01 voltage regulator" + depends on MFD_SEC_CORE || COMPILE_TEST + help + This driver controls Samsung S2MPA01 voltage output regulator + via I2C bus. S2MPA01 has 10 Bucks and 26 LDO outputs. + +config REGULATOR_S2MPS11 + tristate "Samsung S2MPS11/13/14/15/S2MPU02 voltage regulator" + depends on MFD_SEC_CORE || COMPILE_TEST + help + This driver supports a Samsung S2MPS11/13/14/15/S2MPU02 voltage + output regulator via I2C bus. The chip is comprised of high efficient + Buck converters including Dual-Phase Buck converter, Buck-Boost + converter, various LDOs. + +config REGULATOR_S5M8767 + tristate "Samsung S5M8767A voltage regulator" + depends on MFD_SEC_CORE || COMPILE_TEST + help + This driver supports a Samsung S5M8767A voltage output regulator + via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and + supports DVS mode with 8bits of output voltage control. + +config REGULATOR_SC2731 + tristate "Spreadtrum SC2731 power regulator driver" + depends on MFD_SC27XX_PMIC || COMPILE_TEST + help + This driver provides support for the voltage regulators on the + SC2731 PMIC. + +config REGULATOR_SKY81452 + tristate "Skyworks Solutions SKY81452 voltage regulator" + depends on MFD_SKY81452 + help + This driver supports Skyworks SKY81452 voltage output regulator + via I2C bus. SKY81452 has one voltage linear regulator can be + programmed from 4.5V to 20V. + + This driver can also be built as a module. If so, the module + will be called sky81452-regulator. + +config REGULATOR_SLG51000 + tristate "Dialog Semiconductor SLG51000 regulators" + depends on I2C + select REGMAP_I2C + help + Say y here to support for the Dialog Semiconductor SLG51000. + The SLG51000 is seven compact and customizable low dropout + regulators. + +config REGULATOR_SM5703 + tristate "Silicon Mitus SM5703 regulators" + depends on MFD_SM5703 + help + This driver provides support for voltage regulators of SM5703 + multi-function device. + +config REGULATOR_STM32_BOOSTER + tristate "STMicroelectronics STM32 BOOSTER" + depends on ARCH_STM32 || COMPILE_TEST + help + This driver supports internal booster (3V3) embedded in some + STMicroelectronics STM32 chips. It can be used to supply ADC analog + input switches when vdda supply is below 2.7V. + + This driver can also be built as a module. If so, the module + will be called stm32-booster. + +config REGULATOR_STM32_VREFBUF + tristate "STMicroelectronics STM32 VREFBUF" + depends on ARCH_STM32 || COMPILE_TEST + help + This driver supports STMicroelectronics STM32 VREFBUF (voltage + reference buffer) which can be used as voltage reference for + internal ADCs, DACs and also for external components through + dedicated Vref+ pin. + + This driver can also be built as a module. If so, the module + will be called stm32-vrefbuf. + +config REGULATOR_STM32_PWR + bool "STMicroelectronics STM32 PWR" + depends on ARCH_STM32 || COMPILE_TEST + help + This driver supports internal regulators (1V1, 1V8, 3V3) in the + STMicroelectronics STM32 chips. + +config REGULATOR_STPMIC1 + tristate "STMicroelectronics STPMIC1 PMIC Regulators" + depends on MFD_STPMIC1 + help + This driver supports STMicroelectronics STPMIC1 PMIC voltage + regulators and switches. The STPMIC1 regulators supply power to + an application processor as well as to external system + peripherals such as DDR, Flash memories and system devices. + + To compile this driver as a module, choose M here: the + module will be called stpmic1_regulator. + +config REGULATOR_TI_ABB + tristate "TI Adaptive Body Bias on-chip LDO" + depends on ARCH_OMAP || COMPILE_TEST + help + Select this option to support Texas Instruments' on-chip Adaptive Body + Bias (ABB) LDO regulators. It is recommended that this option be + enabled on required TI SoC. Certain Operating Performance Points + on TI SoCs may be unstable without enabling this as it provides + device specific optimized bias to allow/optimize functionality. + +config REGULATOR_STW481X_VMMC + bool "ST Microelectronics STW481X VMMC regulator" + depends on MFD_STW481X || COMPILE_TEST + default y if MFD_STW481X + help + This driver supports the internal VMMC regulator in the STw481x + PMIC chips. + +config REGULATOR_SY7636A + tristate "Silergy SY7636A voltage regulator" + depends on MFD_SY7636A + help + This driver supports Silergy SY3686A voltage regulator. + +config REGULATOR_SY8106A + tristate "Silergy SY8106A regulator" + depends on I2C && OF + select REGMAP_I2C + help + This driver supports SY8106A single output regulator. + +config REGULATOR_SY8824X + tristate "Silergy SY8824C/SY8824E regulator" + depends on I2C && OF + select REGMAP_I2C + help + This driver supports SY8824C single output regulator. + +config REGULATOR_SY8827N + tristate "Silergy SY8827N regulator" + depends on I2C && OF + select REGMAP_I2C + help + This driver supports SY8827N single output regulator. + +config REGULATOR_TPS51632 + tristate "TI TPS51632 Power Regulator" + depends on I2C + select REGMAP_I2C + help + This driver supports TPS51632 voltage regulator chip. + The TPS51632 is 3-2-1 Phase D-Cap+ Step Down Driverless Controller + with Serial VID control and DVFS. + The voltage output can be configure through I2C interface or PWM + interface. + +config REGULATOR_TPS6105X + tristate "TI TPS6105X Power regulators" + depends on TPS6105X + default y if TPS6105X + help + This driver supports TPS61050/TPS61052 voltage regulator chips. + It is a single boost converter primarily for white LEDs and + audio amplifiers. + +config REGULATOR_TPS62360 + tristate "TI TPS6236x Power Regulator" + depends on I2C + select REGMAP_I2C + help + This driver supports TPS6236x voltage regulator chip. This + regulator is meant for processor core supply. This chip is + high-frequency synchronous step down dc-dc converter optimized + for battery-powered portable applications. + +config REGULATOR_TPS6286X + tristate "TI TPS6286x Power Regulator" + depends on I2C && OF + select REGMAP_I2C + help + This driver supports TPS6236x voltage regulator chips. These are + high-frequency synchronous step-down converters with an I2C + interface. + +config REGULATOR_TPS6287X + tristate "TI TPS6287x Power Regulator" + depends on I2C && OF + select REGMAP_I2C + help + This driver supports TPS6287x voltage regulator chips. These are + pin-to-pin high-frequency synchronous step-down dc-dc converters + with an I2C interface. + + If built as a module it will be called tps6287x-regulator. + +config REGULATOR_TPS65023 + tristate "TI TPS65023 Power regulators" + depends on I2C + select REGMAP_I2C + help + This driver supports TPS65023 voltage regulator chips. TPS65023 provides + three step-down converters and two general-purpose LDO voltage regulators. + It supports TI's software based Class-2 SmartReflex implementation. + +config REGULATOR_TPS6507X + tristate "TI TPS6507X Power regulators" + depends on I2C + help + This driver supports TPS6507X voltage regulator chips. TPS6507X provides + three step-down converters and two general-purpose LDO voltage regulators. + It supports TI's software based Class-2 SmartReflex implementation. + +config REGULATOR_TPS65086 + tristate "TI TPS65086 Power regulators" + depends on MFD_TPS65086 + help + This driver provides support for the voltage regulators on + TI TPS65086 PMICs. + +config REGULATOR_TPS65090 + tristate "TI TPS65090 Power regulator" + depends on MFD_TPS65090 + help + This driver provides support for the voltage regulators on the + TI TPS65090 PMIC. + +config REGULATOR_TPS65132 + tristate "TI TPS65132 Dual Output Power regulators" + depends on I2C && GPIOLIB + select REGMAP_I2C + help + This driver supports TPS65132 single inductor - dual output + power supply specifically designed for display panels. + +config REGULATOR_TPS65217 + tristate "TI TPS65217 Power regulators" + depends on MFD_TPS65217 + help + This driver supports TPS65217 voltage regulator chips. TPS65217 + provides three step-down converters and four general-purpose LDO + voltage regulators. It supports software based voltage control + for different voltage domains + +config REGULATOR_TPS65218 + tristate "TI TPS65218 Power regulators" + depends on MFD_TPS65218 && OF + help + This driver supports TPS65218 voltage regulator chips. TPS65218 + provides six step-down converters and one general-purpose LDO + voltage regulators. It supports software based voltage control + for different voltage domains + +config REGULATOR_TPS65219 + tristate "TI TPS65219 Power regulators" + depends on MFD_TPS65219 && OF + help + This driver supports TPS65219 voltage regulator chips. + TPS65219 series of PMICs have 3 single phase BUCKs & 4 LDOs + voltage regulators. It supports software based voltage control + for different voltage domains. + +config REGULATOR_TPS6594 + tristate "TI TPS6594 Power regulators" + depends on MFD_TPS6594 && OF + default MFD_TPS6594 + help + This driver supports TPS6594 voltage regulator chips. + TPS6594 series of PMICs have 5 BUCKs and 4 LDOs + voltage regulators. + BUCKs 1,2,3,4 can be used in single phase or multiphase mode. + Part number defines which single or multiphase mode is i used. + It supports software based voltage control + for different voltage domains. + +config REGULATOR_TPS6524X + tristate "TI TPS6524X Power regulators" + depends on SPI + help + This driver supports TPS6524X voltage regulator chips. TPS6524X + provides three step-down converters and two general-purpose LDO + voltage regulators. This device is interfaced using a customized + serial interface currently supported on the sequencer serial + port controller. + +config REGULATOR_TPS6586X + tristate "TI TPS6586X Power regulators" + depends on MFD_TPS6586X + help + This driver supports TPS6586X voltage regulator chips. + +config REGULATOR_TPS65910 + tristate "TI TPS65910/TPS65911 Power Regulators" + depends on MFD_TPS65910 + help + This driver supports TPS65910/TPS65911 voltage regulator chips. + +config REGULATOR_TPS65912 + tristate "TI TPS65912 Power regulator" + depends on MFD_TPS65912 + help + This driver supports TPS65912 voltage regulator chip. + +config REGULATOR_TPS68470 + tristate "TI TPS68470 PMIC Regulators Driver" + depends on INTEL_SKL_INT3472 || COMPILE_TEST + help + This driver adds support for the TPS68470 PMIC to register + regulators against the usual framework. + + The module will be called "tps68470-regulator". + +config REGULATOR_TWL4030 + tristate "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC" + depends on TWL4030_CORE + help + This driver supports the voltage regulators provided by + this family of companion chips. + +config REGULATOR_UNIPHIER + tristate "UniPhier regulator driver" + depends on ARCH_UNIPHIER || COMPILE_TEST + depends on OF + select REGMAP_MMIO + default ARCH_UNIPHIER + help + Support for regulators implemented on Socionext UniPhier SoCs. + +config REGULATOR_VCTRL + tristate "Voltage controlled regulators" + depends on OF + help + This driver provides support for voltage regulators whose output + voltage is controlled by the voltage of another regulator. + +config REGULATOR_VEXPRESS + tristate "Versatile Express regulators" + depends on VEXPRESS_CONFIG + help + This driver provides support for voltage regulators available + on the ARM Ltd's Versatile Express platform. + +config REGULATOR_VQMMC_IPQ4019 + tristate "IPQ4019 VQMMC SD LDO regulator support" + depends on ARCH_QCOM + help + This driver provides support for the VQMMC LDO I/0 + voltage regulator of the IPQ4019 SD/EMMC controller. + +config REGULATOR_WM831X + tristate "Wolfson Microelectronics WM831x PMIC regulators" + depends on MFD_WM831X + help + Support the voltage and current regulators of the WM831x series + of PMIC devices. + +config REGULATOR_WM8350 + tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC" + depends on MFD_WM8350 + help + This driver provides support for the voltage and current regulators + of the WM8350 AudioPlus PMIC. + +config REGULATOR_WM8400 + tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC" + depends on MFD_WM8400 + help + This driver provides support for the voltage regulators of the + WM8400 AudioPlus PMIC. + +config REGULATOR_WM8994 + tristate "Wolfson Microelectronics WM8994 CODEC" + depends on MFD_WM8994 + help + This driver provides support for the voltage regulators on the + WM8994 CODEC. + +config REGULATOR_QCOM_LABIBB + tristate "QCOM LAB/IBB regulator support" + depends on SPMI || COMPILE_TEST + help + This driver supports Qualcomm's LAB/IBB regulators present on the + Qualcomm's PMIC chip pmi8998. QCOM LAB and IBB are SPMI + based PMIC implementations. LAB can be used as positive + boost regulator and IBB can be used as a negative boost regulator + for LCD display panel. + +endif |