diff options
Diffstat (limited to 'drivers/regulator/act8945a-regulator.c')
| -rw-r--r-- | drivers/regulator/act8945a-regulator.c | 361 |
1 files changed, 361 insertions, 0 deletions
diff --git a/drivers/regulator/act8945a-regulator.c b/drivers/regulator/act8945a-regulator.c new file mode 100644 index 0000000000..24cbdd8338 --- /dev/null +++ b/drivers/regulator/act8945a-regulator.c @@ -0,0 +1,361 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Voltage regulation driver for active-semi ACT8945A PMIC + * + * Copyright (C) 2015 Atmel Corporation + * + * Author: Wenyou Yang <wenyou.yang@atmel.com> + */ + +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> +#include <dt-bindings/regulator/active-semi,8945a-regulator.h> + +/* + * ACT8945A Global Register Map. + */ +#define ACT8945A_SYS_MODE 0x00 +#define ACT8945A_SYS_CTRL 0x01 +#define ACT8945A_SYS_UNLK_REGS 0x0b +#define ACT8945A_DCDC1_VSET1 0x20 +#define ACT8945A_DCDC1_VSET2 0x21 +#define ACT8945A_DCDC1_CTRL 0x22 +#define ACT8945A_DCDC1_SUS 0x24 +#define ACT8945A_DCDC2_VSET1 0x30 +#define ACT8945A_DCDC2_VSET2 0x31 +#define ACT8945A_DCDC2_CTRL 0x32 +#define ACT8945A_DCDC2_SUS 0x34 +#define ACT8945A_DCDC3_VSET1 0x40 +#define ACT8945A_DCDC3_VSET2 0x41 +#define ACT8945A_DCDC3_CTRL 0x42 +#define ACT8945A_DCDC3_SUS 0x44 +#define ACT8945A_LDO1_VSET 0x50 +#define ACT8945A_LDO1_CTRL 0x51 +#define ACT8945A_LDO1_SUS 0x52 +#define ACT8945A_LDO2_VSET 0x54 +#define ACT8945A_LDO2_CTRL 0x55 +#define ACT8945A_LDO2_SUS 0x56 +#define ACT8945A_LDO3_VSET 0x60 +#define ACT8945A_LDO3_CTRL 0x61 +#define ACT8945A_LDO3_SUS 0x62 +#define ACT8945A_LDO4_VSET 0x64 +#define ACT8945A_LDO4_CTRL 0x65 +#define ACT8945A_LDO4_SUS 0x66 + +/* + * Field Definitions. + */ +#define ACT8945A_ENA 0x80 /* ON - [7] */ +#define ACT8945A_VSEL_MASK 0x3F /* VSET - [5:0] */ + +/* + * ACT8945A Voltage Number + */ +#define ACT8945A_VOLTAGE_NUM 64 + +enum { + ACT8945A_ID_DCDC1, + ACT8945A_ID_DCDC2, + ACT8945A_ID_DCDC3, + ACT8945A_ID_LDO1, + ACT8945A_ID_LDO2, + ACT8945A_ID_LDO3, + ACT8945A_ID_LDO4, + ACT8945A_ID_MAX, +}; + +struct act8945a_pmic { + struct regmap *regmap; + u32 op_mode[ACT8945A_ID_MAX]; +}; + +static const struct linear_range act8945a_voltage_ranges[] = { + REGULATOR_LINEAR_RANGE(600000, 0, 23, 25000), + REGULATOR_LINEAR_RANGE(1200000, 24, 47, 50000), + REGULATOR_LINEAR_RANGE(2400000, 48, 63, 100000), +}; + +static int act8945a_set_suspend_state(struct regulator_dev *rdev, bool enable) +{ + struct regmap *regmap = rdev->regmap; + int id = rdev_get_id(rdev); + int reg, val; + + switch (id) { + case ACT8945A_ID_DCDC1: + reg = ACT8945A_DCDC1_SUS; + val = 0xa8; + break; + case ACT8945A_ID_DCDC2: + reg = ACT8945A_DCDC2_SUS; + val = 0xa8; + break; + case ACT8945A_ID_DCDC3: + reg = ACT8945A_DCDC3_SUS; + val = 0xa8; + break; + case ACT8945A_ID_LDO1: + reg = ACT8945A_LDO1_SUS; + val = 0xe8; + break; + case ACT8945A_ID_LDO2: + reg = ACT8945A_LDO2_SUS; + val = 0xe8; + break; + case ACT8945A_ID_LDO3: + reg = ACT8945A_LDO3_SUS; + val = 0xe8; + break; + case ACT8945A_ID_LDO4: + reg = ACT8945A_LDO4_SUS; + val = 0xe8; + break; + default: + return -EINVAL; + } + + if (enable) + val |= BIT(4); + + /* + * Ask the PMIC to enable/disable this output when entering hibernate + * mode. + */ + return regmap_write(regmap, reg, val); +} + +static int act8945a_set_suspend_enable(struct regulator_dev *rdev) +{ + return act8945a_set_suspend_state(rdev, true); +} + +static int act8945a_set_suspend_disable(struct regulator_dev *rdev) +{ + return act8945a_set_suspend_state(rdev, false); +} + +static unsigned int act8945a_of_map_mode(unsigned int mode) +{ + switch (mode) { + case ACT8945A_REGULATOR_MODE_FIXED: + case ACT8945A_REGULATOR_MODE_NORMAL: + return REGULATOR_MODE_NORMAL; + case ACT8945A_REGULATOR_MODE_LOWPOWER: + return REGULATOR_MODE_STANDBY; + default: + return REGULATOR_MODE_INVALID; + } +} + +static int act8945a_set_mode(struct regulator_dev *rdev, unsigned int mode) +{ + struct act8945a_pmic *act8945a = rdev_get_drvdata(rdev); + struct regmap *regmap = rdev->regmap; + int id = rdev_get_id(rdev); + int reg, ret, val = 0; + + switch (id) { + case ACT8945A_ID_DCDC1: + reg = ACT8945A_DCDC1_CTRL; + break; + case ACT8945A_ID_DCDC2: + reg = ACT8945A_DCDC2_CTRL; + break; + case ACT8945A_ID_DCDC3: + reg = ACT8945A_DCDC3_CTRL; + break; + case ACT8945A_ID_LDO1: + reg = ACT8945A_LDO1_CTRL; + break; + case ACT8945A_ID_LDO2: + reg = ACT8945A_LDO2_CTRL; + break; + case ACT8945A_ID_LDO3: + reg = ACT8945A_LDO3_CTRL; + break; + case ACT8945A_ID_LDO4: + reg = ACT8945A_LDO4_CTRL; + break; + default: + return -EINVAL; + } + + switch (mode) { + case REGULATOR_MODE_STANDBY: + if (id > ACT8945A_ID_DCDC3) + val = BIT(5); + break; + case REGULATOR_MODE_NORMAL: + if (id <= ACT8945A_ID_DCDC3) + val = BIT(5); + break; + default: + return -EINVAL; + } + + ret = regmap_update_bits(regmap, reg, BIT(5), val); + if (ret) + return ret; + + act8945a->op_mode[id] = mode; + + return 0; +} + +static unsigned int act8945a_get_mode(struct regulator_dev *rdev) +{ + struct act8945a_pmic *act8945a = rdev_get_drvdata(rdev); + int id = rdev_get_id(rdev); + + if (id < ACT8945A_ID_DCDC1 || id >= ACT8945A_ID_MAX) + return -EINVAL; + + return act8945a->op_mode[id]; +} + +static const struct regulator_ops act8945a_ops = { + .list_voltage = regulator_list_voltage_linear_range, + .map_voltage = regulator_map_voltage_linear_range, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .set_mode = act8945a_set_mode, + .get_mode = act8945a_get_mode, + .is_enabled = regulator_is_enabled_regmap, + .set_suspend_enable = act8945a_set_suspend_enable, + .set_suspend_disable = act8945a_set_suspend_disable, +}; + +#define ACT89xx_REG(_name, _family, _id, _vsel_reg, _supply) \ + [_family##_ID_##_id] = { \ + .name = _name, \ + .supply_name = _supply, \ + .of_match = of_match_ptr("REG_"#_id), \ + .of_map_mode = act8945a_of_map_mode, \ + .regulators_node = of_match_ptr("regulators"), \ + .id = _family##_ID_##_id, \ + .type = REGULATOR_VOLTAGE, \ + .ops = &act8945a_ops, \ + .n_voltages = ACT8945A_VOLTAGE_NUM, \ + .linear_ranges = act8945a_voltage_ranges, \ + .n_linear_ranges = ARRAY_SIZE(act8945a_voltage_ranges), \ + .vsel_reg = _family##_##_id##_##_vsel_reg, \ + .vsel_mask = ACT8945A_VSEL_MASK, \ + .enable_reg = _family##_##_id##_CTRL, \ + .enable_mask = ACT8945A_ENA, \ + .owner = THIS_MODULE, \ + } + +static const struct regulator_desc act8945a_regulators[] = { + ACT89xx_REG("DCDC_REG1", ACT8945A, DCDC1, VSET1, "vp1"), + ACT89xx_REG("DCDC_REG2", ACT8945A, DCDC2, VSET1, "vp2"), + ACT89xx_REG("DCDC_REG3", ACT8945A, DCDC3, VSET1, "vp3"), + ACT89xx_REG("LDO_REG1", ACT8945A, LDO1, VSET, "inl45"), + ACT89xx_REG("LDO_REG2", ACT8945A, LDO2, VSET, "inl45"), + ACT89xx_REG("LDO_REG3", ACT8945A, LDO3, VSET, "inl67"), + ACT89xx_REG("LDO_REG4", ACT8945A, LDO4, VSET, "inl67"), +}; + +static const struct regulator_desc act8945a_alt_regulators[] = { + ACT89xx_REG("DCDC_REG1", ACT8945A, DCDC1, VSET2, "vp1"), + ACT89xx_REG("DCDC_REG2", ACT8945A, DCDC2, VSET2, "vp2"), + ACT89xx_REG("DCDC_REG3", ACT8945A, DCDC3, VSET2, "vp3"), + ACT89xx_REG("LDO_REG1", ACT8945A, LDO1, VSET, "inl45"), + ACT89xx_REG("LDO_REG2", ACT8945A, LDO2, VSET, "inl45"), + ACT89xx_REG("LDO_REG3", ACT8945A, LDO3, VSET, "inl67"), + ACT89xx_REG("LDO_REG4", ACT8945A, LDO4, VSET, "inl67"), +}; + +static int act8945a_pmic_probe(struct platform_device *pdev) +{ + struct regulator_config config = { }; + const struct regulator_desc *regulators; + struct act8945a_pmic *act8945a; + struct regulator_dev *rdev; + int i, num_regulators; + bool voltage_select; + + act8945a = devm_kzalloc(&pdev->dev, sizeof(*act8945a), GFP_KERNEL); + if (!act8945a) + return -ENOMEM; + + act8945a->regmap = dev_get_regmap(pdev->dev.parent, NULL); + if (!act8945a->regmap) { + dev_err(&pdev->dev, + "could not retrieve regmap from parent device\n"); + return -EINVAL; + } + + voltage_select = of_property_read_bool(pdev->dev.parent->of_node, + "active-semi,vsel-high"); + + if (voltage_select) { + regulators = act8945a_alt_regulators; + num_regulators = ARRAY_SIZE(act8945a_alt_regulators); + } else { + regulators = act8945a_regulators; + num_regulators = ARRAY_SIZE(act8945a_regulators); + } + + config.dev = &pdev->dev; + config.dev->of_node = pdev->dev.parent->of_node; + config.driver_data = act8945a; + for (i = 0; i < num_regulators; i++) { + rdev = devm_regulator_register(&pdev->dev, ®ulators[i], + &config); + if (IS_ERR(rdev)) { + dev_err(&pdev->dev, + "failed to register %s regulator\n", + regulators[i].name); + return PTR_ERR(rdev); + } + } + + platform_set_drvdata(pdev, act8945a); + + /* Unlock expert registers. */ + return regmap_write(act8945a->regmap, ACT8945A_SYS_UNLK_REGS, 0xef); +} + +static int __maybe_unused act8945a_suspend(struct device *pdev) +{ + struct act8945a_pmic *act8945a = dev_get_drvdata(pdev); + + /* + * Ask the PMIC to enter the suspend mode on the next PWRHLD + * transition. + */ + return regmap_write(act8945a->regmap, ACT8945A_SYS_CTRL, 0x42); +} + +static SIMPLE_DEV_PM_OPS(act8945a_pm, act8945a_suspend, NULL); + +static void act8945a_pmic_shutdown(struct platform_device *pdev) +{ + struct act8945a_pmic *act8945a = platform_get_drvdata(pdev); + + /* + * Ask the PMIC to shutdown everything on the next PWRHLD transition. + */ + regmap_write(act8945a->regmap, ACT8945A_SYS_CTRL, 0x0); +} + +static struct platform_driver act8945a_pmic_driver = { + .driver = { + .name = "act8945a-regulator", + .probe_type = PROBE_PREFER_ASYNCHRONOUS, + .pm = &act8945a_pm, + }, + .probe = act8945a_pmic_probe, + .shutdown = act8945a_pmic_shutdown, +}; +module_platform_driver(act8945a_pmic_driver); + +MODULE_DESCRIPTION("Active-semi ACT8945A voltage regulator driver"); +MODULE_AUTHOR("Wenyou Yang <wenyou.yang@atmel.com>"); +MODULE_LICENSE("GPL"); |