diff options
Diffstat (limited to 'drivers/regulator/bcm590xx-regulator.c')
| -rw-r--r-- | drivers/regulator/bcm590xx-regulator.c | 366 |
1 files changed, 366 insertions, 0 deletions
diff --git a/drivers/regulator/bcm590xx-regulator.c b/drivers/regulator/bcm590xx-regulator.c new file mode 100644 index 0000000000..9f0cda46b0 --- /dev/null +++ b/drivers/regulator/bcm590xx-regulator.c @@ -0,0 +1,366 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Broadcom BCM590xx regulator driver + * + * Copyright 2014 Linaro Limited + * Author: Matt Porter <mporter@linaro.org> + */ + +#include <linux/err.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/mfd/bcm590xx.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/of_regulator.h> +#include <linux/slab.h> + +/* I2C slave 0 registers */ +#define BCM590XX_RFLDOPMCTRL1 0x60 +#define BCM590XX_IOSR1PMCTRL1 0x7a +#define BCM590XX_IOSR2PMCTRL1 0x7c +#define BCM590XX_CSRPMCTRL1 0x7e +#define BCM590XX_SDSR1PMCTRL1 0x82 +#define BCM590XX_SDSR2PMCTRL1 0x86 +#define BCM590XX_MSRPMCTRL1 0x8a +#define BCM590XX_VSRPMCTRL1 0x8e +#define BCM590XX_RFLDOCTRL 0x96 +#define BCM590XX_CSRVOUT1 0xc0 + +/* I2C slave 1 registers */ +#define BCM590XX_GPLDO5PMCTRL1 0x16 +#define BCM590XX_GPLDO6PMCTRL1 0x18 +#define BCM590XX_GPLDO1CTRL 0x1a +#define BCM590XX_GPLDO2CTRL 0x1b +#define BCM590XX_GPLDO3CTRL 0x1c +#define BCM590XX_GPLDO4CTRL 0x1d +#define BCM590XX_GPLDO5CTRL 0x1e +#define BCM590XX_GPLDO6CTRL 0x1f +#define BCM590XX_OTG_CTRL 0x40 +#define BCM590XX_GPLDO1PMCTRL1 0x57 +#define BCM590XX_GPLDO2PMCTRL1 0x59 +#define BCM590XX_GPLDO3PMCTRL1 0x5b +#define BCM590XX_GPLDO4PMCTRL1 0x5d + +#define BCM590XX_REG_ENABLE BIT(7) +#define BCM590XX_VBUS_ENABLE BIT(2) +#define BCM590XX_LDO_VSEL_MASK GENMASK(5, 3) +#define BCM590XX_SR_VSEL_MASK GENMASK(5, 0) + +/* + * RFLDO to VSR regulators are + * accessed via I2C slave 0 + */ + +/* LDO regulator IDs */ +#define BCM590XX_REG_RFLDO 0 +#define BCM590XX_REG_CAMLDO1 1 +#define BCM590XX_REG_CAMLDO2 2 +#define BCM590XX_REG_SIMLDO1 3 +#define BCM590XX_REG_SIMLDO2 4 +#define BCM590XX_REG_SDLDO 5 +#define BCM590XX_REG_SDXLDO 6 +#define BCM590XX_REG_MMCLDO1 7 +#define BCM590XX_REG_MMCLDO2 8 +#define BCM590XX_REG_AUDLDO 9 +#define BCM590XX_REG_MICLDO 10 +#define BCM590XX_REG_USBLDO 11 +#define BCM590XX_REG_VIBLDO 12 + +/* DCDC regulator IDs */ +#define BCM590XX_REG_CSR 13 +#define BCM590XX_REG_IOSR1 14 +#define BCM590XX_REG_IOSR2 15 +#define BCM590XX_REG_MSR 16 +#define BCM590XX_REG_SDSR1 17 +#define BCM590XX_REG_SDSR2 18 +#define BCM590XX_REG_VSR 19 + +/* + * GPLDO1 to VBUS regulators are + * accessed via I2C slave 1 + */ + +#define BCM590XX_REG_GPLDO1 20 +#define BCM590XX_REG_GPLDO2 21 +#define BCM590XX_REG_GPLDO3 22 +#define BCM590XX_REG_GPLDO4 23 +#define BCM590XX_REG_GPLDO5 24 +#define BCM590XX_REG_GPLDO6 25 +#define BCM590XX_REG_VBUS 26 + +#define BCM590XX_NUM_REGS 27 + +#define BCM590XX_REG_IS_LDO(n) (n < BCM590XX_REG_CSR) +#define BCM590XX_REG_IS_GPLDO(n) \ + ((n > BCM590XX_REG_VSR) && (n < BCM590XX_REG_VBUS)) +#define BCM590XX_REG_IS_VBUS(n) (n == BCM590XX_REG_VBUS) + +/* LDO group A: supported voltages in microvolts */ +static const unsigned int ldo_a_table[] = { + 1200000, 1800000, 2500000, 2700000, 2800000, + 2900000, 3000000, 3300000, +}; + +/* LDO group C: supported voltages in microvolts */ +static const unsigned int ldo_c_table[] = { + 3100000, 1800000, 2500000, 2700000, 2800000, + 2900000, 3000000, 3300000, +}; + +static const unsigned int ldo_vbus[] = { + 5000000, +}; + +/* DCDC group CSR: supported voltages in microvolts */ +static const struct linear_range dcdc_csr_ranges[] = { + REGULATOR_LINEAR_RANGE(860000, 2, 50, 10000), + REGULATOR_LINEAR_RANGE(1360000, 51, 55, 20000), + REGULATOR_LINEAR_RANGE(900000, 56, 63, 0), +}; + +/* DCDC group IOSR1: supported voltages in microvolts */ +static const struct linear_range dcdc_iosr1_ranges[] = { + REGULATOR_LINEAR_RANGE(860000, 2, 51, 10000), + REGULATOR_LINEAR_RANGE(1500000, 52, 52, 0), + REGULATOR_LINEAR_RANGE(1800000, 53, 53, 0), + REGULATOR_LINEAR_RANGE(900000, 54, 63, 0), +}; + +/* DCDC group SDSR1: supported voltages in microvolts */ +static const struct linear_range dcdc_sdsr1_ranges[] = { + REGULATOR_LINEAR_RANGE(860000, 2, 50, 10000), + REGULATOR_LINEAR_RANGE(1340000, 51, 51, 0), + REGULATOR_LINEAR_RANGE(900000, 52, 63, 0), +}; + +struct bcm590xx_info { + const char *name; + const char *vin_name; + u8 n_voltages; + const unsigned int *volt_table; + u8 n_linear_ranges; + const struct linear_range *linear_ranges; +}; + +#define BCM590XX_REG_TABLE(_name, _table) \ + { \ + .name = #_name, \ + .n_voltages = ARRAY_SIZE(_table), \ + .volt_table = _table, \ + } + +#define BCM590XX_REG_RANGES(_name, _ranges) \ + { \ + .name = #_name, \ + .n_voltages = 64, \ + .n_linear_ranges = ARRAY_SIZE(_ranges), \ + .linear_ranges = _ranges, \ + } + +static struct bcm590xx_info bcm590xx_regs[] = { + BCM590XX_REG_TABLE(rfldo, ldo_a_table), + BCM590XX_REG_TABLE(camldo1, ldo_c_table), + BCM590XX_REG_TABLE(camldo2, ldo_c_table), + BCM590XX_REG_TABLE(simldo1, ldo_a_table), + BCM590XX_REG_TABLE(simldo2, ldo_a_table), + BCM590XX_REG_TABLE(sdldo, ldo_c_table), + BCM590XX_REG_TABLE(sdxldo, ldo_a_table), + BCM590XX_REG_TABLE(mmcldo1, ldo_a_table), + BCM590XX_REG_TABLE(mmcldo2, ldo_a_table), + BCM590XX_REG_TABLE(audldo, ldo_a_table), + BCM590XX_REG_TABLE(micldo, ldo_a_table), + BCM590XX_REG_TABLE(usbldo, ldo_a_table), + BCM590XX_REG_TABLE(vibldo, ldo_c_table), + BCM590XX_REG_RANGES(csr, dcdc_csr_ranges), + BCM590XX_REG_RANGES(iosr1, dcdc_iosr1_ranges), + BCM590XX_REG_RANGES(iosr2, dcdc_iosr1_ranges), + BCM590XX_REG_RANGES(msr, dcdc_iosr1_ranges), + BCM590XX_REG_RANGES(sdsr1, dcdc_sdsr1_ranges), + BCM590XX_REG_RANGES(sdsr2, dcdc_iosr1_ranges), + BCM590XX_REG_RANGES(vsr, dcdc_iosr1_ranges), + BCM590XX_REG_TABLE(gpldo1, ldo_a_table), + BCM590XX_REG_TABLE(gpldo2, ldo_a_table), + BCM590XX_REG_TABLE(gpldo3, ldo_a_table), + BCM590XX_REG_TABLE(gpldo4, ldo_a_table), + BCM590XX_REG_TABLE(gpldo5, ldo_a_table), + BCM590XX_REG_TABLE(gpldo6, ldo_a_table), + BCM590XX_REG_TABLE(vbus, ldo_vbus), +}; + +struct bcm590xx_reg { + struct regulator_desc *desc; + struct bcm590xx *mfd; +}; + +static int bcm590xx_get_vsel_register(int id) +{ + if (BCM590XX_REG_IS_LDO(id)) + return BCM590XX_RFLDOCTRL + id; + else if (BCM590XX_REG_IS_GPLDO(id)) + return BCM590XX_GPLDO1CTRL + id; + else + return BCM590XX_CSRVOUT1 + (id - BCM590XX_REG_CSR) * 3; +} + +static int bcm590xx_get_enable_register(int id) +{ + int reg = 0; + + if (BCM590XX_REG_IS_LDO(id)) + reg = BCM590XX_RFLDOPMCTRL1 + id * 2; + else if (BCM590XX_REG_IS_GPLDO(id)) + reg = BCM590XX_GPLDO1PMCTRL1 + id * 2; + else + switch (id) { + case BCM590XX_REG_CSR: + reg = BCM590XX_CSRPMCTRL1; + break; + case BCM590XX_REG_IOSR1: + reg = BCM590XX_IOSR1PMCTRL1; + break; + case BCM590XX_REG_IOSR2: + reg = BCM590XX_IOSR2PMCTRL1; + break; + case BCM590XX_REG_MSR: + reg = BCM590XX_MSRPMCTRL1; + break; + case BCM590XX_REG_SDSR1: + reg = BCM590XX_SDSR1PMCTRL1; + break; + case BCM590XX_REG_SDSR2: + reg = BCM590XX_SDSR2PMCTRL1; + break; + case BCM590XX_REG_VSR: + reg = BCM590XX_VSRPMCTRL1; + break; + case BCM590XX_REG_VBUS: + reg = BCM590XX_OTG_CTRL; + break; + } + + + return reg; +} + +static const struct regulator_ops bcm590xx_ops_ldo = { + .is_enabled = regulator_is_enabled_regmap, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .list_voltage = regulator_list_voltage_table, + .map_voltage = regulator_map_voltage_iterate, +}; + +static const struct regulator_ops bcm590xx_ops_dcdc = { + .is_enabled = regulator_is_enabled_regmap, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .list_voltage = regulator_list_voltage_linear_range, + .map_voltage = regulator_map_voltage_linear_range, +}; + +static const struct regulator_ops bcm590xx_ops_vbus = { + .is_enabled = regulator_is_enabled_regmap, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, +}; + +static int bcm590xx_probe(struct platform_device *pdev) +{ + struct bcm590xx *bcm590xx = dev_get_drvdata(pdev->dev.parent); + struct bcm590xx_reg *pmu; + struct regulator_config config = { }; + struct bcm590xx_info *info; + struct regulator_dev *rdev; + int i; + + pmu = devm_kzalloc(&pdev->dev, sizeof(*pmu), GFP_KERNEL); + if (!pmu) + return -ENOMEM; + + pmu->mfd = bcm590xx; + + platform_set_drvdata(pdev, pmu); + + pmu->desc = devm_kcalloc(&pdev->dev, + BCM590XX_NUM_REGS, + sizeof(struct regulator_desc), + GFP_KERNEL); + if (!pmu->desc) + return -ENOMEM; + + info = bcm590xx_regs; + + for (i = 0; i < BCM590XX_NUM_REGS; i++, info++) { + /* Register the regulators */ + pmu->desc[i].name = info->name; + pmu->desc[i].of_match = of_match_ptr(info->name); + pmu->desc[i].regulators_node = of_match_ptr("regulators"); + pmu->desc[i].supply_name = info->vin_name; + pmu->desc[i].id = i; + pmu->desc[i].volt_table = info->volt_table; + pmu->desc[i].n_voltages = info->n_voltages; + pmu->desc[i].linear_ranges = info->linear_ranges; + pmu->desc[i].n_linear_ranges = info->n_linear_ranges; + + if ((BCM590XX_REG_IS_LDO(i)) || (BCM590XX_REG_IS_GPLDO(i))) { + pmu->desc[i].ops = &bcm590xx_ops_ldo; + pmu->desc[i].vsel_mask = BCM590XX_LDO_VSEL_MASK; + } else if (BCM590XX_REG_IS_VBUS(i)) + pmu->desc[i].ops = &bcm590xx_ops_vbus; + else { + pmu->desc[i].ops = &bcm590xx_ops_dcdc; + pmu->desc[i].vsel_mask = BCM590XX_SR_VSEL_MASK; + } + + if (BCM590XX_REG_IS_VBUS(i)) + pmu->desc[i].enable_mask = BCM590XX_VBUS_ENABLE; + else { + pmu->desc[i].vsel_reg = bcm590xx_get_vsel_register(i); + pmu->desc[i].enable_is_inverted = true; + pmu->desc[i].enable_mask = BCM590XX_REG_ENABLE; + } + pmu->desc[i].enable_reg = bcm590xx_get_enable_register(i); + pmu->desc[i].type = REGULATOR_VOLTAGE; + pmu->desc[i].owner = THIS_MODULE; + + config.dev = bcm590xx->dev; + config.driver_data = pmu; + if (BCM590XX_REG_IS_GPLDO(i) || BCM590XX_REG_IS_VBUS(i)) + config.regmap = bcm590xx->regmap_sec; + else + config.regmap = bcm590xx->regmap_pri; + + rdev = devm_regulator_register(&pdev->dev, &pmu->desc[i], + &config); + if (IS_ERR(rdev)) { + dev_err(bcm590xx->dev, + "failed to register %s regulator\n", + pdev->name); + return PTR_ERR(rdev); + } + } + + return 0; +} + +static struct platform_driver bcm590xx_regulator_driver = { + .driver = { + .name = "bcm590xx-vregs", + .probe_type = PROBE_PREFER_ASYNCHRONOUS, + }, + .probe = bcm590xx_probe, +}; +module_platform_driver(bcm590xx_regulator_driver); + +MODULE_AUTHOR("Matt Porter <mporter@linaro.org>"); +MODULE_DESCRIPTION("BCM590xx voltage regulator driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:bcm590xx-vregs"); |