diff options
Diffstat (limited to 'drivers/regulator/rohm-regulator.c')
| -rw-r--r-- | drivers/regulator/rohm-regulator.c | 133 |
1 files changed, 133 insertions, 0 deletions
diff --git a/drivers/regulator/rohm-regulator.c b/drivers/regulator/rohm-regulator.c new file mode 100644 index 0000000000..0e2418ed95 --- /dev/null +++ b/drivers/regulator/rohm-regulator.c @@ -0,0 +1,133 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (C) 2020 ROHM Semiconductors + +#include <linux/errno.h> +#include <linux/mfd/rohm-generic.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/regmap.h> +#include <linux/regulator/driver.h> + +static int set_dvs_level(const struct regulator_desc *desc, + struct device_node *np, struct regmap *regmap, + char *prop, unsigned int reg, unsigned int mask, + unsigned int omask, unsigned int oreg) +{ + int ret, i; + uint32_t uv; + + ret = of_property_read_u32(np, prop, &uv); + if (ret) { + if (ret != -EINVAL) + return ret; + return 0; + } + /* If voltage is set to 0 => disable */ + if (uv == 0) { + if (omask) + return regmap_update_bits(regmap, oreg, omask, 0); + } + /* Some setups don't allow setting own voltage but do allow enabling */ + if (!mask) { + if (omask) + return regmap_update_bits(regmap, oreg, omask, omask); + + return -EINVAL; + } + for (i = 0; i < desc->n_voltages; i++) { + /* NOTE to next hacker - Does not support pickable ranges */ + if (desc->linear_range_selectors_bitfield) + return -EINVAL; + if (desc->n_linear_ranges) + ret = regulator_desc_list_voltage_linear_range(desc, i); + else + ret = regulator_desc_list_voltage_linear(desc, i); + if (ret < 0) + continue; + if (ret == uv) { + i <<= ffs(desc->vsel_mask) - 1; + ret = regmap_update_bits(regmap, reg, mask, i); + if (omask && !ret) + ret = regmap_update_bits(regmap, oreg, omask, + omask); + break; + } + } + return ret; +} + +int rohm_regulator_set_dvs_levels(const struct rohm_dvs_config *dvs, + struct device_node *np, + const struct regulator_desc *desc, + struct regmap *regmap) +{ + int i, ret = 0; + char *prop; + unsigned int reg, mask, omask, oreg = desc->enable_reg; + + for (i = 0; i < ROHM_DVS_LEVEL_VALID_AMOUNT && !ret; i++) { + int bit; + + bit = BIT(i); + if (dvs->level_map & bit) { + switch (bit) { + case ROHM_DVS_LEVEL_RUN: + prop = "rohm,dvs-run-voltage"; + reg = dvs->run_reg; + mask = dvs->run_mask; + omask = dvs->run_on_mask; + break; + case ROHM_DVS_LEVEL_IDLE: + prop = "rohm,dvs-idle-voltage"; + reg = dvs->idle_reg; + mask = dvs->idle_mask; + omask = dvs->idle_on_mask; + break; + case ROHM_DVS_LEVEL_SUSPEND: + prop = "rohm,dvs-suspend-voltage"; + reg = dvs->suspend_reg; + mask = dvs->suspend_mask; + omask = dvs->suspend_on_mask; + break; + case ROHM_DVS_LEVEL_LPSR: + prop = "rohm,dvs-lpsr-voltage"; + reg = dvs->lpsr_reg; + mask = dvs->lpsr_mask; + omask = dvs->lpsr_on_mask; + break; + case ROHM_DVS_LEVEL_SNVS: + prop = "rohm,dvs-snvs-voltage"; + reg = dvs->snvs_reg; + mask = dvs->snvs_mask; + omask = dvs->snvs_on_mask; + break; + default: + return -EINVAL; + } + ret = set_dvs_level(desc, np, regmap, prop, reg, mask, + omask, oreg); + } + } + return ret; +} +EXPORT_SYMBOL(rohm_regulator_set_dvs_levels); + +/* + * Few ROHM PMIC ICs have constrains on voltage changing: + * BD71837 - only buck 1-4 voltages can be changed when they are enabled. + * Other bucks and all LDOs must be disabled when voltage is changed. + * BD96801 - LDO voltage levels can be changed when LDOs are disabled. + */ +int rohm_regulator_set_voltage_sel_restricted(struct regulator_dev *rdev, + unsigned int sel) +{ + if (rdev->desc->ops->is_enabled(rdev)) + return -EBUSY; + + return regulator_set_voltage_sel_regmap(rdev, sel); +} +EXPORT_SYMBOL_GPL(rohm_regulator_set_voltage_sel_restricted); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>"); +MODULE_DESCRIPTION("Generic helpers for ROHM PMIC regulator drivers"); |