summaryrefslogtreecommitdiffstats
path: root/drivers/regulator/sy7636a-regulator.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/regulator/sy7636a-regulator.c')
-rw-r--r--drivers/regulator/sy7636a-regulator.c139
1 files changed, 139 insertions, 0 deletions
diff --git a/drivers/regulator/sy7636a-regulator.c b/drivers/regulator/sy7636a-regulator.c
new file mode 100644
index 0000000000..d1e7ba1fb3
--- /dev/null
+++ b/drivers/regulator/sy7636a-regulator.c
@@ -0,0 +1,139 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Functions to access SY3686A power management chip voltages
+//
+// Copyright (C) 2019 reMarkable AS - http://www.remarkable.com/
+//
+// Authors: Lars Ivar Miljeteig <lars.ivar.miljeteig@remarkable.com>
+// Alistair Francis <alistair@alistair23.me>
+
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/mfd/sy7636a.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regmap.h>
+
+struct sy7636a_data {
+ struct regmap *regmap;
+ struct gpio_desc *pgood_gpio;
+};
+
+static int sy7636a_get_vcom_voltage_op(struct regulator_dev *rdev)
+{
+ int ret;
+ unsigned int val, val_h;
+
+ ret = regmap_read(rdev->regmap, SY7636A_REG_VCOM_ADJUST_CTRL_L, &val);
+ if (ret)
+ return ret;
+
+ ret = regmap_read(rdev->regmap, SY7636A_REG_VCOM_ADJUST_CTRL_H, &val_h);
+ if (ret)
+ return ret;
+
+ val |= (val_h << VCOM_ADJUST_CTRL_SHIFT);
+
+ return (val & VCOM_ADJUST_CTRL_MASK) * VCOM_ADJUST_CTRL_SCAL;
+}
+
+static int sy7636a_get_status(struct regulator_dev *rdev)
+{
+ struct sy7636a_data *data = dev_get_drvdata(rdev->dev.parent);
+ int ret = 0;
+
+ ret = gpiod_get_value_cansleep(data->pgood_gpio);
+ if (ret < 0)
+ dev_err(&rdev->dev, "Failed to read pgood gpio: %d\n", ret);
+
+ return ret;
+}
+
+static const struct regulator_ops sy7636a_vcom_volt_ops = {
+ .get_voltage = sy7636a_get_vcom_voltage_op,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .get_status = sy7636a_get_status,
+};
+
+static const struct regulator_desc desc = {
+ .name = "vcom",
+ .id = 0,
+ .ops = &sy7636a_vcom_volt_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .enable_reg = SY7636A_REG_OPERATION_MODE_CRL,
+ .enable_mask = SY7636A_OPERATION_MODE_CRL_ONOFF,
+ .regulators_node = of_match_ptr("regulators"),
+ .of_match = of_match_ptr("vcom"),
+};
+
+static int sy7636a_regulator_probe(struct platform_device *pdev)
+{
+ struct regmap *regmap = dev_get_regmap(pdev->dev.parent, NULL);
+ struct regulator_config config = { };
+ struct regulator_dev *rdev;
+ struct gpio_desc *gdp;
+ struct sy7636a_data *data;
+ int ret;
+
+ if (!regmap)
+ return -EPROBE_DEFER;
+
+ gdp = devm_gpiod_get(pdev->dev.parent, "epd-pwr-good", GPIOD_IN);
+ if (IS_ERR(gdp)) {
+ dev_err(pdev->dev.parent, "Power good GPIO fault %ld\n", PTR_ERR(gdp));
+ return PTR_ERR(gdp);
+ }
+
+ data = devm_kzalloc(&pdev->dev, sizeof(struct sy7636a_data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->regmap = regmap;
+ data->pgood_gpio = gdp;
+
+ platform_set_drvdata(pdev, data);
+
+ ret = regmap_write(regmap, SY7636A_REG_POWER_ON_DELAY_TIME, 0x0);
+ if (ret) {
+ dev_err(pdev->dev.parent, "Failed to initialize regulator: %d\n", ret);
+ return ret;
+ }
+
+ config.dev = &pdev->dev;
+ config.dev->of_node = pdev->dev.parent->of_node;
+ config.regmap = regmap;
+
+ rdev = devm_regulator_register(&pdev->dev, &desc, &config);
+ if (IS_ERR(rdev)) {
+ dev_err(pdev->dev.parent, "Failed to register %s regulator\n",
+ pdev->name);
+ return PTR_ERR(rdev);
+ }
+
+ return 0;
+}
+
+static const struct platform_device_id sy7636a_regulator_id_table[] = {
+ { "sy7636a-regulator", },
+ { }
+};
+MODULE_DEVICE_TABLE(platform, sy7636a_regulator_id_table);
+
+static struct platform_driver sy7636a_regulator_driver = {
+ .driver = {
+ .name = "sy7636a-regulator",
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
+ },
+ .probe = sy7636a_regulator_probe,
+ .id_table = sy7636a_regulator_id_table,
+};
+module_platform_driver(sy7636a_regulator_driver);
+
+MODULE_AUTHOR("Lars Ivar Miljeteig <lars.ivar.miljeteig@remarkable.com>");
+MODULE_DESCRIPTION("SY7636A voltage regulator driver");
+MODULE_LICENSE("GPL v2");