summaryrefslogtreecommitdiffstats
path: root/drivers/regulator/twl-regulator.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/regulator/twl-regulator.c')
-rw-r--r--drivers/regulator/twl-regulator.c676
1 files changed, 676 insertions, 0 deletions
diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c
new file mode 100644
index 0000000000..5bacfcebf5
--- /dev/null
+++ b/drivers/regulator/twl-regulator.c
@@ -0,0 +1,676 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * twl-regulator.c -- support regulators in twl4030/twl6030 family chips
+ *
+ * Copyright (C) 2008 David Brownell
+ */
+
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/mfd/twl.h>
+#include <linux/delay.h>
+
+/*
+ * The TWL4030/TW5030/TPS659x0 family chips include power management, a
+ * USB OTG transceiver, an RTC, ADC, PWM, and lots more. Some versions
+ * include an audio codec, battery charger, and more voltage regulators.
+ * These chips are often used in OMAP-based systems.
+ *
+ * This driver implements software-based resource control for various
+ * voltage regulators. This is usually augmented with state machine
+ * based control.
+ */
+
+struct twlreg_info {
+ /* start of regulator's PM_RECEIVER control register bank */
+ u8 base;
+
+ /* twl resource ID, for resource control state machine */
+ u8 id;
+
+ /* voltage in mV = table[VSEL]; table_len must be a power-of-two */
+ u8 table_len;
+ const u16 *table;
+
+ /* State REMAP default configuration */
+ u8 remap;
+
+ /* used by regulator core */
+ struct regulator_desc desc;
+
+ /* chip specific features */
+ unsigned long features;
+
+ /* data passed from board for external get/set voltage */
+ void *data;
+};
+
+
+/* LDO control registers ... offset is from the base of its register bank.
+ * The first three registers of all power resource banks help hardware to
+ * manage the various resource groups.
+ */
+/* Common offset in TWL4030/6030 */
+#define VREG_GRP 0
+/* TWL4030 register offsets */
+#define VREG_TYPE 1
+#define VREG_REMAP 2
+#define VREG_DEDICATED 3 /* LDO control */
+#define VREG_VOLTAGE_SMPS_4030 9
+/* TWL6030 register offsets */
+#define VREG_TRANS 1
+#define VREG_STATE 2
+#define VREG_VOLTAGE 3
+#define VREG_VOLTAGE_SMPS 4
+
+static inline int
+twlreg_read(struct twlreg_info *info, unsigned slave_subgp, unsigned offset)
+{
+ u8 value;
+ int status;
+
+ status = twl_i2c_read_u8(slave_subgp,
+ &value, info->base + offset);
+ return (status < 0) ? status : value;
+}
+
+static inline int
+twlreg_write(struct twlreg_info *info, unsigned slave_subgp, unsigned offset,
+ u8 value)
+{
+ return twl_i2c_write_u8(slave_subgp,
+ value, info->base + offset);
+}
+
+/*----------------------------------------------------------------------*/
+
+/* generic power resource operations, which work on all regulators */
+
+static int twlreg_grp(struct regulator_dev *rdev)
+{
+ return twlreg_read(rdev_get_drvdata(rdev), TWL_MODULE_PM_RECEIVER,
+ VREG_GRP);
+}
+
+/*
+ * Enable/disable regulators by joining/leaving the P1 (processor) group.
+ * We assume nobody else is updating the DEV_GRP registers.
+ */
+/* definition for 4030 family */
+#define P3_GRP_4030 BIT(7) /* "peripherals" */
+#define P2_GRP_4030 BIT(6) /* secondary processor, modem, etc */
+#define P1_GRP_4030 BIT(5) /* CPU/Linux */
+/* definition for 6030 family */
+#define P3_GRP_6030 BIT(2) /* secondary processor, modem, etc */
+#define P2_GRP_6030 BIT(1) /* "peripherals" */
+#define P1_GRP_6030 BIT(0) /* CPU/Linux */
+
+static int twl4030reg_is_enabled(struct regulator_dev *rdev)
+{
+ int state = twlreg_grp(rdev);
+
+ if (state < 0)
+ return state;
+
+ return state & P1_GRP_4030;
+}
+
+#define PB_I2C_BUSY BIT(0)
+#define PB_I2C_BWEN BIT(1)
+
+/* Wait until buffer empty/ready to send a word on power bus. */
+static int twl4030_wait_pb_ready(void)
+{
+
+ int ret;
+ int timeout = 10;
+ u8 val;
+
+ do {
+ ret = twl_i2c_read_u8(TWL_MODULE_PM_MASTER, &val,
+ TWL4030_PM_MASTER_PB_CFG);
+ if (ret < 0)
+ return ret;
+
+ if (!(val & PB_I2C_BUSY))
+ return 0;
+
+ mdelay(1);
+ timeout--;
+ } while (timeout);
+
+ return -ETIMEDOUT;
+}
+
+/* Send a word over the powerbus */
+static int twl4030_send_pb_msg(unsigned msg)
+{
+ u8 val;
+ int ret;
+
+ /* save powerbus configuration */
+ ret = twl_i2c_read_u8(TWL_MODULE_PM_MASTER, &val,
+ TWL4030_PM_MASTER_PB_CFG);
+ if (ret < 0)
+ return ret;
+
+ /* Enable i2c access to powerbus */
+ ret = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, val | PB_I2C_BWEN,
+ TWL4030_PM_MASTER_PB_CFG);
+ if (ret < 0)
+ return ret;
+
+ ret = twl4030_wait_pb_ready();
+ if (ret < 0)
+ return ret;
+
+ ret = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, msg >> 8,
+ TWL4030_PM_MASTER_PB_WORD_MSB);
+ if (ret < 0)
+ return ret;
+
+ ret = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, msg & 0xff,
+ TWL4030_PM_MASTER_PB_WORD_LSB);
+ if (ret < 0)
+ return ret;
+
+ ret = twl4030_wait_pb_ready();
+ if (ret < 0)
+ return ret;
+
+ /* Restore powerbus configuration */
+ return twl_i2c_write_u8(TWL_MODULE_PM_MASTER, val,
+ TWL4030_PM_MASTER_PB_CFG);
+}
+
+static int twl4030reg_enable(struct regulator_dev *rdev)
+{
+ struct twlreg_info *info = rdev_get_drvdata(rdev);
+ int grp;
+
+ grp = twlreg_grp(rdev);
+ if (grp < 0)
+ return grp;
+
+ grp |= P1_GRP_4030;
+
+ return twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_GRP, grp);
+}
+
+static int twl4030reg_disable(struct regulator_dev *rdev)
+{
+ struct twlreg_info *info = rdev_get_drvdata(rdev);
+ int grp;
+
+ grp = twlreg_grp(rdev);
+ if (grp < 0)
+ return grp;
+
+ grp &= ~(P1_GRP_4030 | P2_GRP_4030 | P3_GRP_4030);
+
+ return twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_GRP, grp);
+}
+
+static int twl4030reg_get_status(struct regulator_dev *rdev)
+{
+ int state = twlreg_grp(rdev);
+
+ if (state < 0)
+ return state;
+ state &= 0x0f;
+
+ /* assume state != WARM_RESET; we'd not be running... */
+ if (!state)
+ return REGULATOR_STATUS_OFF;
+ return (state & BIT(3))
+ ? REGULATOR_STATUS_NORMAL
+ : REGULATOR_STATUS_STANDBY;
+}
+
+static int twl4030reg_set_mode(struct regulator_dev *rdev, unsigned mode)
+{
+ struct twlreg_info *info = rdev_get_drvdata(rdev);
+ unsigned message;
+
+ /* We can only set the mode through state machine commands... */
+ switch (mode) {
+ case REGULATOR_MODE_NORMAL:
+ message = MSG_SINGULAR(DEV_GRP_P1, info->id, RES_STATE_ACTIVE);
+ break;
+ case REGULATOR_MODE_STANDBY:
+ message = MSG_SINGULAR(DEV_GRP_P1, info->id, RES_STATE_SLEEP);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return twl4030_send_pb_msg(message);
+}
+
+static inline unsigned int twl4030reg_map_mode(unsigned int mode)
+{
+ switch (mode) {
+ case RES_STATE_ACTIVE:
+ return REGULATOR_MODE_NORMAL;
+ case RES_STATE_SLEEP:
+ return REGULATOR_MODE_STANDBY;
+ default:
+ return REGULATOR_MODE_INVALID;
+ }
+}
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * Support for adjustable-voltage LDOs uses a four bit (or less) voltage
+ * select field in its control register. We use tables indexed by VSEL
+ * to record voltages in milliVolts. (Accuracy is about three percent.)
+ *
+ * Note that VSEL values for VAUX2 changed in twl5030 and newer silicon;
+ * currently handled by listing two slightly different VAUX2 regulators,
+ * only one of which will be configured.
+ *
+ * VSEL values documented as "TI cannot support these values" are flagged
+ * in these tables as UNSUP() values; we normally won't assign them.
+ *
+ * VAUX3 at 3V is incorrectly listed in some TI manuals as unsupported.
+ * TI are revising the twl5030/tps659x0 specs to support that 3.0V setting.
+ */
+#define UNSUP_MASK 0x8000
+
+#define UNSUP(x) (UNSUP_MASK | (x))
+#define IS_UNSUP(info, x) \
+ ((UNSUP_MASK & (x)) && \
+ !((info)->features & TWL4030_ALLOW_UNSUPPORTED))
+#define LDO_MV(x) (~UNSUP_MASK & (x))
+
+
+static const u16 VAUX1_VSEL_table[] = {
+ UNSUP(1500), UNSUP(1800), 2500, 2800,
+ 3000, 3000, 3000, 3000,
+};
+static const u16 VAUX2_4030_VSEL_table[] = {
+ UNSUP(1000), UNSUP(1000), UNSUP(1200), 1300,
+ 1500, 1800, UNSUP(1850), 2500,
+ UNSUP(2600), 2800, UNSUP(2850), UNSUP(3000),
+ UNSUP(3150), UNSUP(3150), UNSUP(3150), UNSUP(3150),
+};
+static const u16 VAUX2_VSEL_table[] = {
+ 1700, 1700, 1900, 1300,
+ 1500, 1800, 2000, 2500,
+ 2100, 2800, 2200, 2300,
+ 2400, 2400, 2400, 2400,
+};
+static const u16 VAUX3_VSEL_table[] = {
+ 1500, 1800, 2500, 2800,
+ 3000, 3000, 3000, 3000,
+};
+static const u16 VAUX4_VSEL_table[] = {
+ 700, 1000, 1200, UNSUP(1300),
+ 1500, 1800, UNSUP(1850), 2500,
+ UNSUP(2600), 2800, UNSUP(2850), UNSUP(3000),
+ UNSUP(3150), UNSUP(3150), UNSUP(3150), UNSUP(3150),
+};
+static const u16 VMMC1_VSEL_table[] = {
+ 1850, 2850, 3000, 3150,
+};
+static const u16 VMMC2_VSEL_table[] = {
+ UNSUP(1000), UNSUP(1000), UNSUP(1200), UNSUP(1300),
+ UNSUP(1500), UNSUP(1800), 1850, UNSUP(2500),
+ 2600, 2800, 2850, 3000,
+ 3150, 3150, 3150, 3150,
+};
+static const u16 VPLL1_VSEL_table[] = {
+ 1000, 1200, 1300, 1800,
+ UNSUP(2800), UNSUP(3000), UNSUP(3000), UNSUP(3000),
+};
+static const u16 VPLL2_VSEL_table[] = {
+ 700, 1000, 1200, 1300,
+ UNSUP(1500), 1800, UNSUP(1850), UNSUP(2500),
+ UNSUP(2600), UNSUP(2800), UNSUP(2850), UNSUP(3000),
+ UNSUP(3150), UNSUP(3150), UNSUP(3150), UNSUP(3150),
+};
+static const u16 VSIM_VSEL_table[] = {
+ UNSUP(1000), UNSUP(1200), UNSUP(1300), 1800,
+ 2800, 3000, 3000, 3000,
+};
+static const u16 VDAC_VSEL_table[] = {
+ 1200, 1300, 1800, 1800,
+};
+static const u16 VIO_VSEL_table[] = {
+ 1800, 1850,
+};
+static const u16 VINTANA2_VSEL_table[] = {
+ 2500, 2750,
+};
+
+/* 600mV to 1450mV in 12.5 mV steps */
+static const struct linear_range VDD1_ranges[] = {
+ REGULATOR_LINEAR_RANGE(600000, 0, 68, 12500)
+};
+
+/* 600mV to 1450mV in 12.5 mV steps, everything above = 1500mV */
+static const struct linear_range VDD2_ranges[] = {
+ REGULATOR_LINEAR_RANGE(600000, 0, 68, 12500),
+ REGULATOR_LINEAR_RANGE(1500000, 69, 69, 12500)
+};
+
+static int twl4030ldo_list_voltage(struct regulator_dev *rdev, unsigned index)
+{
+ struct twlreg_info *info = rdev_get_drvdata(rdev);
+ int mV = info->table[index];
+
+ return IS_UNSUP(info, mV) ? 0 : (LDO_MV(mV) * 1000);
+}
+
+static int
+twl4030ldo_set_voltage_sel(struct regulator_dev *rdev, unsigned selector)
+{
+ struct twlreg_info *info = rdev_get_drvdata(rdev);
+
+ return twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_VOLTAGE,
+ selector);
+}
+
+static int twl4030ldo_get_voltage_sel(struct regulator_dev *rdev)
+{
+ struct twlreg_info *info = rdev_get_drvdata(rdev);
+ int vsel = twlreg_read(info, TWL_MODULE_PM_RECEIVER, VREG_VOLTAGE);
+
+ if (vsel < 0)
+ return vsel;
+
+ vsel &= info->table_len - 1;
+ return vsel;
+}
+
+static const struct regulator_ops twl4030ldo_ops = {
+ .list_voltage = twl4030ldo_list_voltage,
+
+ .set_voltage_sel = twl4030ldo_set_voltage_sel,
+ .get_voltage_sel = twl4030ldo_get_voltage_sel,
+
+ .enable = twl4030reg_enable,
+ .disable = twl4030reg_disable,
+ .is_enabled = twl4030reg_is_enabled,
+
+ .set_mode = twl4030reg_set_mode,
+
+ .get_status = twl4030reg_get_status,
+};
+
+static int
+twl4030smps_set_voltage(struct regulator_dev *rdev, int min_uV, int max_uV,
+ unsigned *selector)
+{
+ struct twlreg_info *info = rdev_get_drvdata(rdev);
+ int vsel = DIV_ROUND_UP(min_uV - 600000, 12500);
+
+ twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_VOLTAGE_SMPS_4030, vsel);
+
+ return 0;
+}
+
+static int twl4030smps_get_voltage(struct regulator_dev *rdev)
+{
+ struct twlreg_info *info = rdev_get_drvdata(rdev);
+ int vsel;
+
+ vsel = twlreg_read(info, TWL_MODULE_PM_RECEIVER,
+ VREG_VOLTAGE_SMPS_4030);
+
+ return vsel * 12500 + 600000;
+}
+
+static const struct regulator_ops twl4030smps_ops = {
+ .list_voltage = regulator_list_voltage_linear_range,
+
+ .set_voltage = twl4030smps_set_voltage,
+ .get_voltage = twl4030smps_get_voltage,
+};
+
+/*----------------------------------------------------------------------*/
+
+static const struct regulator_ops twl4030fixed_ops = {
+ .list_voltage = regulator_list_voltage_linear,
+
+ .enable = twl4030reg_enable,
+ .disable = twl4030reg_disable,
+ .is_enabled = twl4030reg_is_enabled,
+
+ .set_mode = twl4030reg_set_mode,
+
+ .get_status = twl4030reg_get_status,
+};
+
+/*----------------------------------------------------------------------*/
+
+#define TWL4030_ADJUSTABLE_LDO(label, offset, num, turnon_delay, remap_conf) \
+static const struct twlreg_info TWL4030_INFO_##label = { \
+ .base = offset, \
+ .id = num, \
+ .table_len = ARRAY_SIZE(label##_VSEL_table), \
+ .table = label##_VSEL_table, \
+ .remap = remap_conf, \
+ .desc = { \
+ .name = #label, \
+ .id = TWL4030_REG_##label, \
+ .n_voltages = ARRAY_SIZE(label##_VSEL_table), \
+ .ops = &twl4030ldo_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .enable_time = turnon_delay, \
+ .of_map_mode = twl4030reg_map_mode, \
+ }, \
+ }
+
+#define TWL4030_ADJUSTABLE_SMPS(label, offset, num, turnon_delay, remap_conf, \
+ n_volt) \
+static const struct twlreg_info TWL4030_INFO_##label = { \
+ .base = offset, \
+ .id = num, \
+ .remap = remap_conf, \
+ .desc = { \
+ .name = #label, \
+ .id = TWL4030_REG_##label, \
+ .ops = &twl4030smps_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .enable_time = turnon_delay, \
+ .of_map_mode = twl4030reg_map_mode, \
+ .n_voltages = n_volt, \
+ .n_linear_ranges = ARRAY_SIZE(label ## _ranges), \
+ .linear_ranges = label ## _ranges, \
+ }, \
+ }
+
+#define TWL4030_FIXED_LDO(label, offset, mVolts, num, turnon_delay, \
+ remap_conf) \
+static const struct twlreg_info TWLFIXED_INFO_##label = { \
+ .base = offset, \
+ .id = num, \
+ .remap = remap_conf, \
+ .desc = { \
+ .name = #label, \
+ .id = TWL4030##_REG_##label, \
+ .n_voltages = 1, \
+ .ops = &twl4030fixed_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .min_uV = mVolts * 1000, \
+ .enable_time = turnon_delay, \
+ .of_map_mode = twl4030reg_map_mode, \
+ }, \
+ }
+
+/*
+ * We list regulators here if systems need some level of
+ * software control over them after boot.
+ */
+TWL4030_ADJUSTABLE_LDO(VAUX1, 0x17, 1, 100, 0x08);
+TWL4030_ADJUSTABLE_LDO(VAUX2_4030, 0x1b, 2, 100, 0x08);
+TWL4030_ADJUSTABLE_LDO(VAUX2, 0x1b, 2, 100, 0x08);
+TWL4030_ADJUSTABLE_LDO(VAUX3, 0x1f, 3, 100, 0x08);
+TWL4030_ADJUSTABLE_LDO(VAUX4, 0x23, 4, 100, 0x08);
+TWL4030_ADJUSTABLE_LDO(VMMC1, 0x27, 5, 100, 0x08);
+TWL4030_ADJUSTABLE_LDO(VMMC2, 0x2b, 6, 100, 0x08);
+TWL4030_ADJUSTABLE_LDO(VPLL1, 0x2f, 7, 100, 0x00);
+TWL4030_ADJUSTABLE_LDO(VPLL2, 0x33, 8, 100, 0x08);
+TWL4030_ADJUSTABLE_LDO(VSIM, 0x37, 9, 100, 0x00);
+TWL4030_ADJUSTABLE_LDO(VDAC, 0x3b, 10, 100, 0x08);
+TWL4030_ADJUSTABLE_LDO(VINTANA2, 0x43, 12, 100, 0x08);
+TWL4030_ADJUSTABLE_LDO(VIO, 0x4b, 14, 1000, 0x08);
+TWL4030_ADJUSTABLE_SMPS(VDD1, 0x55, 15, 1000, 0x08, 68);
+TWL4030_ADJUSTABLE_SMPS(VDD2, 0x63, 16, 1000, 0x08, 69);
+/* VUSBCP is managed *only* by the USB subchip */
+TWL4030_FIXED_LDO(VINTANA1, 0x3f, 1500, 11, 100, 0x08);
+TWL4030_FIXED_LDO(VINTDIG, 0x47, 1500, 13, 100, 0x08);
+TWL4030_FIXED_LDO(VUSB1V5, 0x71, 1500, 17, 100, 0x08);
+TWL4030_FIXED_LDO(VUSB1V8, 0x74, 1800, 18, 100, 0x08);
+TWL4030_FIXED_LDO(VUSB3V1, 0x77, 3100, 19, 150, 0x08);
+
+#define TWL_OF_MATCH(comp, family, label) \
+ { \
+ .compatible = comp, \
+ .data = &family##_INFO_##label, \
+ }
+
+#define TWL4030_OF_MATCH(comp, label) TWL_OF_MATCH(comp, TWL4030, label)
+#define TWL6030_OF_MATCH(comp, label) TWL_OF_MATCH(comp, TWL6030, label)
+#define TWL6032_OF_MATCH(comp, label) TWL_OF_MATCH(comp, TWL6032, label)
+#define TWLFIXED_OF_MATCH(comp, label) TWL_OF_MATCH(comp, TWLFIXED, label)
+#define TWLSMPS_OF_MATCH(comp, label) TWL_OF_MATCH(comp, TWLSMPS, label)
+
+static const struct of_device_id twl_of_match[] = {
+ TWL4030_OF_MATCH("ti,twl4030-vaux1", VAUX1),
+ TWL4030_OF_MATCH("ti,twl4030-vaux2", VAUX2_4030),
+ TWL4030_OF_MATCH("ti,twl5030-vaux2", VAUX2),
+ TWL4030_OF_MATCH("ti,twl4030-vaux3", VAUX3),
+ TWL4030_OF_MATCH("ti,twl4030-vaux4", VAUX4),
+ TWL4030_OF_MATCH("ti,twl4030-vmmc1", VMMC1),
+ TWL4030_OF_MATCH("ti,twl4030-vmmc2", VMMC2),
+ TWL4030_OF_MATCH("ti,twl4030-vpll1", VPLL1),
+ TWL4030_OF_MATCH("ti,twl4030-vpll2", VPLL2),
+ TWL4030_OF_MATCH("ti,twl4030-vsim", VSIM),
+ TWL4030_OF_MATCH("ti,twl4030-vdac", VDAC),
+ TWL4030_OF_MATCH("ti,twl4030-vintana2", VINTANA2),
+ TWL4030_OF_MATCH("ti,twl4030-vio", VIO),
+ TWL4030_OF_MATCH("ti,twl4030-vdd1", VDD1),
+ TWL4030_OF_MATCH("ti,twl4030-vdd2", VDD2),
+ TWLFIXED_OF_MATCH("ti,twl4030-vintana1", VINTANA1),
+ TWLFIXED_OF_MATCH("ti,twl4030-vintdig", VINTDIG),
+ TWLFIXED_OF_MATCH("ti,twl4030-vusb1v5", VUSB1V5),
+ TWLFIXED_OF_MATCH("ti,twl4030-vusb1v8", VUSB1V8),
+ TWLFIXED_OF_MATCH("ti,twl4030-vusb3v1", VUSB3V1),
+ {},
+};
+MODULE_DEVICE_TABLE(of, twl_of_match);
+
+static int twlreg_probe(struct platform_device *pdev)
+{
+ int id;
+ struct twlreg_info *info;
+ const struct twlreg_info *template;
+ struct regulator_init_data *initdata;
+ struct regulation_constraints *c;
+ struct regulator_dev *rdev;
+ struct regulator_config config = { };
+
+ template = of_device_get_match_data(&pdev->dev);
+ if (!template)
+ return -ENODEV;
+
+ id = template->desc.id;
+ initdata = of_get_regulator_init_data(&pdev->dev, pdev->dev.of_node,
+ &template->desc);
+ if (!initdata)
+ return -EINVAL;
+
+ info = devm_kmemdup(&pdev->dev, template, sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ /* Constrain board-specific capabilities according to what
+ * this driver and the chip itself can actually do.
+ */
+ c = &initdata->constraints;
+ c->valid_modes_mask &= REGULATOR_MODE_NORMAL | REGULATOR_MODE_STANDBY;
+ c->valid_ops_mask &= REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS;
+ switch (id) {
+ case TWL4030_REG_VIO:
+ case TWL4030_REG_VDD1:
+ case TWL4030_REG_VDD2:
+ case TWL4030_REG_VPLL1:
+ case TWL4030_REG_VINTANA1:
+ case TWL4030_REG_VINTANA2:
+ case TWL4030_REG_VINTDIG:
+ c->always_on = true;
+ break;
+ default:
+ break;
+ }
+
+ config.dev = &pdev->dev;
+ config.init_data = initdata;
+ config.driver_data = info;
+ config.of_node = pdev->dev.of_node;
+
+ rdev = devm_regulator_register(&pdev->dev, &info->desc, &config);
+ if (IS_ERR(rdev)) {
+ dev_err(&pdev->dev, "can't register %s, %ld\n",
+ info->desc.name, PTR_ERR(rdev));
+ return PTR_ERR(rdev);
+ }
+ platform_set_drvdata(pdev, rdev);
+
+ twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_REMAP, info->remap);
+
+ /* NOTE: many regulators support short-circuit IRQs (presentable
+ * as REGULATOR_OVER_CURRENT notifications?) configured via:
+ * - SC_CONFIG
+ * - SC_DETECT1 (vintana2, vmmc1/2, vaux1/2/3/4)
+ * - SC_DETECT2 (vusb, vdac, vio, vdd1/2, vpll2)
+ * - IT_CONFIG
+ */
+
+ return 0;
+}
+
+MODULE_ALIAS("platform:twl4030_reg");
+
+static struct platform_driver twlreg_driver = {
+ .probe = twlreg_probe,
+ /* NOTE: short name, to work around driver model truncation of
+ * "twl_regulator.12" (and friends) to "twl_regulator.1".
+ */
+ .driver = {
+ .name = "twl4030_reg",
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
+ .of_match_table = of_match_ptr(twl_of_match),
+ },
+};
+
+static int __init twlreg_init(void)
+{
+ return platform_driver_register(&twlreg_driver);
+}
+subsys_initcall(twlreg_init);
+
+static void __exit twlreg_exit(void)
+{
+ platform_driver_unregister(&twlreg_driver);
+}
+module_exit(twlreg_exit)
+
+MODULE_DESCRIPTION("TWL4030 regulator driver");
+MODULE_LICENSE("GPL");