summaryrefslogtreecommitdiffstats
path: root/drivers/reset/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/reset/Kconfig')
-rw-r--r--drivers/reset/Kconfig326
1 files changed, 326 insertions, 0 deletions
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
new file mode 100644
index 0000000000..ccd59ddd76
--- /dev/null
+++ b/drivers/reset/Kconfig
@@ -0,0 +1,326 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config ARCH_HAS_RESET_CONTROLLER
+ bool
+
+menuconfig RESET_CONTROLLER
+ bool "Reset Controller Support"
+ default y if ARCH_HAS_RESET_CONTROLLER
+ help
+ Generic Reset Controller support.
+
+ This framework is designed to abstract reset handling of devices
+ via GPIOs or SoC-internal reset controller modules.
+
+ If unsure, say no.
+
+if RESET_CONTROLLER
+
+config RESET_A10SR
+ tristate "Altera Arria10 System Resource Reset"
+ depends on MFD_ALTERA_A10SR || COMPILE_TEST
+ help
+ This option enables support for the external reset functions for
+ peripheral PHYs on the Altera Arria10 System Resource Chip.
+
+config RESET_ATH79
+ bool "AR71xx Reset Driver" if COMPILE_TEST
+ default ATH79
+ help
+ This enables the ATH79 reset controller driver that supports the
+ AR71xx SoC reset controller.
+
+config RESET_AXS10X
+ bool "AXS10x Reset Driver" if COMPILE_TEST
+ default ARC_PLAT_AXS10X
+ help
+ This enables the reset controller driver for AXS10x.
+
+config RESET_BCM6345
+ bool "BCM6345 Reset Controller"
+ depends on BMIPS_GENERIC || COMPILE_TEST
+ default BMIPS_GENERIC
+ help
+ This enables the reset controller driver for BCM6345 SoCs.
+
+config RESET_BERLIN
+ tristate "Berlin Reset Driver"
+ depends on ARCH_BERLIN || COMPILE_TEST
+ default m if ARCH_BERLIN
+ help
+ This enables the reset controller driver for Marvell Berlin SoCs.
+
+config RESET_BRCMSTB
+ tristate "Broadcom STB reset controller"
+ depends on ARCH_BRCMSTB || COMPILE_TEST
+ default ARCH_BRCMSTB
+ help
+ This enables the reset controller driver for Broadcom STB SoCs using
+ a SUN_TOP_CTRL_SW_INIT style controller.
+
+config RESET_BRCMSTB_RESCAL
+ tristate "Broadcom STB RESCAL reset controller"
+ depends on HAS_IOMEM
+ depends on ARCH_BRCMSTB || COMPILE_TEST
+ default ARCH_BRCMSTB
+ help
+ This enables the RESCAL reset controller for SATA, PCIe0, or PCIe1 on
+ BCM7216.
+
+config RESET_HSDK
+ bool "Synopsys HSDK Reset Driver"
+ depends on HAS_IOMEM
+ depends on ARC_SOC_HSDK || COMPILE_TEST
+ help
+ This enables the reset controller driver for HSDK board.
+
+config RESET_IMX7
+ tristate "i.MX7/8 Reset Driver"
+ depends on HAS_IOMEM
+ depends on SOC_IMX7D || (ARM64 && ARCH_MXC) || COMPILE_TEST
+ default y if SOC_IMX7D
+ select MFD_SYSCON
+ help
+ This enables the reset controller driver for i.MX7 SoCs.
+
+config RESET_INTEL_GW
+ bool "Intel Reset Controller Driver"
+ depends on X86 || COMPILE_TEST
+ depends on OF && HAS_IOMEM
+ select REGMAP_MMIO
+ help
+ This enables the reset controller driver for Intel Gateway SoCs.
+ Say Y to control the reset signals provided by reset controller.
+ Otherwise, say N.
+
+config RESET_K210
+ bool "Reset controller driver for Canaan Kendryte K210 SoC"
+ depends on (SOC_CANAAN || COMPILE_TEST) && OF
+ select MFD_SYSCON
+ default SOC_CANAAN
+ help
+ Support for the Canaan Kendryte K210 RISC-V SoC reset controller.
+ Say Y if you want to control reset signals provided by this
+ controller.
+
+config RESET_LANTIQ
+ bool "Lantiq XWAY Reset Driver" if COMPILE_TEST
+ default SOC_TYPE_XWAY
+ help
+ This enables the reset controller driver for Lantiq / Intel XWAY SoCs.
+
+config RESET_LPC18XX
+ bool "LPC18xx/43xx Reset Driver" if COMPILE_TEST
+ default ARCH_LPC18XX
+ help
+ This enables the reset controller driver for NXP LPC18xx/43xx SoCs.
+
+config RESET_MCHP_SPARX5
+ bool "Microchip Sparx5 reset driver"
+ depends on ARCH_SPARX5 || SOC_LAN966 || COMPILE_TEST
+ default y if SPARX5_SWITCH
+ select MFD_SYSCON
+ help
+ This driver supports switch core reset for the Microchip Sparx5 SoC.
+
+config RESET_MESON
+ tristate "Meson Reset Driver"
+ depends on ARCH_MESON || COMPILE_TEST
+ default ARCH_MESON
+ help
+ This enables the reset driver for Amlogic Meson SoCs.
+
+config RESET_MESON_AUDIO_ARB
+ tristate "Meson Audio Memory Arbiter Reset Driver"
+ depends on ARCH_MESON || COMPILE_TEST
+ help
+ This enables the reset driver for Audio Memory Arbiter of
+ Amlogic's A113 based SoCs
+
+config RESET_NPCM
+ bool "NPCM BMC Reset Driver" if COMPILE_TEST
+ default ARCH_NPCM
+ help
+ This enables the reset controller driver for Nuvoton NPCM
+ BMC SoCs.
+
+config RESET_NUVOTON_MA35D1
+ bool "Nuvoton MA35D1 Reset Driver"
+ depends on ARCH_MA35 || COMPILE_TEST
+ default ARCH_MA35
+ help
+ This enables the reset controller driver for Nuvoton MA35D1 SoC.
+
+config RESET_PISTACHIO
+ bool "Pistachio Reset Driver"
+ depends on MIPS || COMPILE_TEST
+ help
+ This enables the reset driver for ImgTec Pistachio SoCs.
+
+config RESET_POLARFIRE_SOC
+ bool "Microchip PolarFire SoC (MPFS) Reset Driver"
+ depends on MCHP_CLK_MPFS
+ select AUXILIARY_BUS
+ default MCHP_CLK_MPFS
+ help
+ This driver supports peripheral reset for the Microchip PolarFire SoC
+
+config RESET_QCOM_AOSS
+ tristate "Qcom AOSS Reset Driver"
+ depends on ARCH_QCOM || COMPILE_TEST
+ help
+ This enables the AOSS (always on subsystem) reset driver
+ for Qualcomm SDM845 SoCs. Say Y if you want to control
+ reset signals provided by AOSS for Modem, Venus, ADSP,
+ GPU, Camera, Wireless, Display subsystem. Otherwise, say N.
+
+config RESET_QCOM_PDC
+ tristate "Qualcomm PDC Reset Driver"
+ depends on ARCH_QCOM || COMPILE_TEST
+ help
+ This enables the PDC (Power Domain Controller) reset driver
+ for Qualcomm Technologies Inc SDM845 SoCs. Say Y if you want
+ to control reset signals provided by PDC for Modem, Compute,
+ Display, GPU, Debug, AOP, Sensors, Audio, SP and APPS.
+
+config RESET_RASPBERRYPI
+ tristate "Raspberry Pi 4 Firmware Reset Driver"
+ depends on RASPBERRYPI_FIRMWARE || (RASPBERRYPI_FIRMWARE=n && COMPILE_TEST)
+ default USB_XHCI_PCI
+ help
+ Raspberry Pi 4's co-processor controls some of the board's HW
+ initialization process, but it's up to Linux to trigger it when
+ relevant. This driver provides a reset controller capable of
+ interfacing with RPi4's co-processor and model these firmware
+ initialization routines as reset lines.
+
+config RESET_RZG2L_USBPHY_CTRL
+ tristate "Renesas RZ/G2L USBPHY control driver"
+ depends on ARCH_RZG2L || COMPILE_TEST
+ help
+ Support for USBPHY Control found on RZ/G2L family. It mainly
+ controls reset and power down of the USB/PHY.
+
+config RESET_SCMI
+ tristate "Reset driver controlled via ARM SCMI interface"
+ depends on ARM_SCMI_PROTOCOL || COMPILE_TEST
+ default ARM_SCMI_PROTOCOL
+ help
+ This driver provides support for reset signal/domains that are
+ controlled by firmware that implements the SCMI interface.
+
+ This driver uses SCMI Message Protocol to interact with the
+ firmware controlling all the reset signals.
+
+config RESET_SIMPLE
+ bool "Simple Reset Controller Driver" if COMPILE_TEST || EXPERT
+ default ARCH_ASPEED || ARCH_BCMBCA || ARCH_BITMAIN || ARCH_REALTEK || ARCH_STM32 || (ARCH_INTEL_SOCFPGA && ARM64) || ARCH_SUNXI || ARC
+ depends on HAS_IOMEM
+ help
+ This enables a simple reset controller driver for reset lines that
+ that can be asserted and deasserted by toggling bits in a contiguous,
+ exclusive register space.
+
+ Currently this driver supports:
+ - Altera SoCFPGAs
+ - ASPEED BMC SoCs
+ - Bitmain BM1880 SoC
+ - Realtek SoCs
+ - RCC reset controller in STM32 MCUs
+ - Allwinner SoCs
+ - SiFive FU740 SoCs
+
+config RESET_SOCFPGA
+ bool "SoCFPGA Reset Driver" if COMPILE_TEST && (!ARM || !ARCH_INTEL_SOCFPGA)
+ default ARM && ARCH_INTEL_SOCFPGA
+ select RESET_SIMPLE
+ help
+ This enables the reset driver for the SoCFPGA ARMv7 platforms. This
+ driver gets initialized early during platform init calls.
+
+config RESET_SUNPLUS
+ bool "Sunplus SoCs Reset Driver" if COMPILE_TEST
+ default ARCH_SUNPLUS
+ help
+ This enables the reset driver support for Sunplus SoCs.
+ The reset lines that can be asserted and deasserted by toggling bits
+ in a contiguous, exclusive register space. The register is HIWORD_MASKED,
+ which means each register holds 16 reset lines.
+
+config RESET_SUNXI
+ bool "Allwinner SoCs Reset Driver" if COMPILE_TEST && !ARCH_SUNXI
+ default ARCH_SUNXI
+ select RESET_SIMPLE
+ help
+ This enables the reset driver for Allwinner SoCs.
+
+config RESET_TI_SCI
+ tristate "TI System Control Interface (TI-SCI) reset driver"
+ depends on TI_SCI_PROTOCOL || (COMPILE_TEST && TI_SCI_PROTOCOL=n)
+ help
+ This enables the reset driver support over TI System Control Interface
+ available on some new TI's SoCs. If you wish to use reset resources
+ managed by the TI System Controller, say Y here. Otherwise, say N.
+
+config RESET_TI_SYSCON
+ tristate "TI SYSCON Reset Driver"
+ depends on HAS_IOMEM
+ select MFD_SYSCON
+ help
+ This enables the reset driver support for TI devices with
+ memory-mapped reset registers as part of a syscon device node. If
+ you wish to use the reset framework for such memory-mapped devices,
+ say Y here. Otherwise, say N.
+
+config RESET_TI_TPS380X
+ tristate "TI TPS380x Reset Driver"
+ select GPIOLIB
+ help
+ This enables the reset driver support for TI TPS380x devices. If
+ you wish to use the reset framework for such devices, say Y here.
+ Otherwise, say N.
+
+config RESET_TN48M_CPLD
+ tristate "Delta Networks TN48M switch CPLD reset controller"
+ depends on MFD_TN48M_CPLD || COMPILE_TEST
+ default MFD_TN48M_CPLD
+ help
+ This enables the reset controller driver for the Delta TN48M CPLD.
+ It provides reset signals for Armada 7040 and 385 SoC-s, Alleycat 3X
+ switch MAC-s, Alaska OOB ethernet PHY, Quad Alaska ethernet PHY-s and
+ Microchip PD69200 PoE PSE controller.
+
+ This driver can also be built as a module. If so, the module will be
+ called reset-tn48m.
+
+config RESET_UNIPHIER
+ tristate "Reset controller driver for UniPhier SoCs"
+ depends on ARCH_UNIPHIER || COMPILE_TEST
+ depends on OF && MFD_SYSCON
+ default ARCH_UNIPHIER
+ help
+ Support for reset controllers on UniPhier SoCs.
+ Say Y if you want to control reset signals provided by System Control
+ block, Media I/O block, Peripheral Block.
+
+config RESET_UNIPHIER_GLUE
+ tristate "Reset driver in glue layer for UniPhier SoCs"
+ depends on (ARCH_UNIPHIER || COMPILE_TEST) && OF
+ default ARCH_UNIPHIER
+ select RESET_SIMPLE
+ help
+ Support for peripheral core reset included in its own glue layer
+ on UniPhier SoCs. Say Y if you want to control reset signals
+ provided by the glue layer.
+
+config RESET_ZYNQ
+ bool "ZYNQ Reset Driver" if COMPILE_TEST
+ default ARCH_ZYNQ
+ help
+ This enables the reset controller driver for Xilinx Zynq SoCs.
+
+source "drivers/reset/starfive/Kconfig"
+source "drivers/reset/sti/Kconfig"
+source "drivers/reset/hisilicon/Kconfig"
+source "drivers/reset/tegra/Kconfig"
+
+endif