diff options
Diffstat (limited to 'drivers/reset/reset-ti-syscon.c')
| -rw-r--r-- | drivers/reset/reset-ti-syscon.c | 228 |
1 files changed, 228 insertions, 0 deletions
diff --git a/drivers/reset/reset-ti-syscon.c b/drivers/reset/reset-ti-syscon.c new file mode 100644 index 0000000000..23f86ddb86 --- /dev/null +++ b/drivers/reset/reset-ti-syscon.c @@ -0,0 +1,228 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * TI SYSCON regmap reset driver + * + * Copyright (C) 2015-2016 Texas Instruments Incorporated - https://www.ti.com/ + * Andrew F. Davis <afd@ti.com> + * Suman Anna <afd@ti.com> + */ + +#include <linux/mfd/syscon.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/reset-controller.h> + +#include <dt-bindings/reset/ti-syscon.h> + +/** + * struct ti_syscon_reset_control - reset control structure + * @assert_offset: reset assert control register offset from syscon base + * @assert_bit: reset assert bit in the reset assert control register + * @deassert_offset: reset deassert control register offset from syscon base + * @deassert_bit: reset deassert bit in the reset deassert control register + * @status_offset: reset status register offset from syscon base + * @status_bit: reset status bit in the reset status register + * @flags: reset flag indicating how the (de)assert and status are handled + */ +struct ti_syscon_reset_control { + unsigned int assert_offset; + unsigned int assert_bit; + unsigned int deassert_offset; + unsigned int deassert_bit; + unsigned int status_offset; + unsigned int status_bit; + u32 flags; +}; + +/** + * struct ti_syscon_reset_data - reset controller information structure + * @rcdev: reset controller entity + * @regmap: regmap handle containing the memory-mapped reset registers + * @controls: array of reset controls + * @nr_controls: number of controls in control array + */ +struct ti_syscon_reset_data { + struct reset_controller_dev rcdev; + struct regmap *regmap; + struct ti_syscon_reset_control *controls; + unsigned int nr_controls; +}; + +#define to_ti_syscon_reset_data(_rcdev) \ + container_of(_rcdev, struct ti_syscon_reset_data, rcdev) + +/** + * ti_syscon_reset_assert() - assert device reset + * @rcdev: reset controller entity + * @id: ID of the reset to be asserted + * + * This function implements the reset driver op to assert a device's reset. + * This asserts the reset in a manner prescribed by the reset flags. + * + * Return: 0 for successful request, else a corresponding error value + */ +static int ti_syscon_reset_assert(struct reset_controller_dev *rcdev, + unsigned long id) +{ + struct ti_syscon_reset_data *data = to_ti_syscon_reset_data(rcdev); + struct ti_syscon_reset_control *control; + unsigned int mask, value; + + if (id >= data->nr_controls) + return -EINVAL; + + control = &data->controls[id]; + + if (control->flags & ASSERT_NONE) + return -ENOTSUPP; /* assert not supported for this reset */ + + mask = BIT(control->assert_bit); + value = (control->flags & ASSERT_SET) ? mask : 0x0; + + return regmap_write_bits(data->regmap, control->assert_offset, mask, value); +} + +/** + * ti_syscon_reset_deassert() - deassert device reset + * @rcdev: reset controller entity + * @id: ID of reset to be deasserted + * + * This function implements the reset driver op to deassert a device's reset. + * This deasserts the reset in a manner prescribed by the reset flags. + * + * Return: 0 for successful request, else a corresponding error value + */ +static int ti_syscon_reset_deassert(struct reset_controller_dev *rcdev, + unsigned long id) +{ + struct ti_syscon_reset_data *data = to_ti_syscon_reset_data(rcdev); + struct ti_syscon_reset_control *control; + unsigned int mask, value; + + if (id >= data->nr_controls) + return -EINVAL; + + control = &data->controls[id]; + + if (control->flags & DEASSERT_NONE) + return -ENOTSUPP; /* deassert not supported for this reset */ + + mask = BIT(control->deassert_bit); + value = (control->flags & DEASSERT_SET) ? mask : 0x0; + + return regmap_write_bits(data->regmap, control->deassert_offset, mask, value); +} + +/** + * ti_syscon_reset_status() - check device reset status + * @rcdev: reset controller entity + * @id: ID of the reset for which the status is being requested + * + * This function implements the reset driver op to return the status of a + * device's reset. + * + * Return: 0 if reset is deasserted, true if reset is asserted, else a + * corresponding error value + */ +static int ti_syscon_reset_status(struct reset_controller_dev *rcdev, + unsigned long id) +{ + struct ti_syscon_reset_data *data = to_ti_syscon_reset_data(rcdev); + struct ti_syscon_reset_control *control; + unsigned int reset_state; + int ret; + + if (id >= data->nr_controls) + return -EINVAL; + + control = &data->controls[id]; + + if (control->flags & STATUS_NONE) + return -ENOTSUPP; /* status not supported for this reset */ + + ret = regmap_read(data->regmap, control->status_offset, &reset_state); + if (ret) + return ret; + + return !(reset_state & BIT(control->status_bit)) == + !(control->flags & STATUS_SET); +} + +static const struct reset_control_ops ti_syscon_reset_ops = { + .assert = ti_syscon_reset_assert, + .deassert = ti_syscon_reset_deassert, + .status = ti_syscon_reset_status, +}; + +static int ti_syscon_reset_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct ti_syscon_reset_data *data; + struct regmap *regmap; + const __be32 *list; + struct ti_syscon_reset_control *controls; + int size, nr_controls, i; + + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + regmap = syscon_node_to_regmap(np->parent); + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + + list = of_get_property(np, "ti,reset-bits", &size); + if (!list || (size / sizeof(*list)) % 7 != 0) { + dev_err(dev, "invalid DT reset description\n"); + return -EINVAL; + } + + nr_controls = (size / sizeof(*list)) / 7; + controls = devm_kcalloc(dev, nr_controls, sizeof(*controls), + GFP_KERNEL); + if (!controls) + return -ENOMEM; + + for (i = 0; i < nr_controls; i++) { + controls[i].assert_offset = be32_to_cpup(list++); + controls[i].assert_bit = be32_to_cpup(list++); + controls[i].deassert_offset = be32_to_cpup(list++); + controls[i].deassert_bit = be32_to_cpup(list++); + controls[i].status_offset = be32_to_cpup(list++); + controls[i].status_bit = be32_to_cpup(list++); + controls[i].flags = be32_to_cpup(list++); + } + + data->rcdev.ops = &ti_syscon_reset_ops; + data->rcdev.owner = THIS_MODULE; + data->rcdev.of_node = np; + data->rcdev.nr_resets = nr_controls; + data->regmap = regmap; + data->controls = controls; + data->nr_controls = nr_controls; + + return devm_reset_controller_register(dev, &data->rcdev); +} + +static const struct of_device_id ti_syscon_reset_of_match[] = { + { .compatible = "ti,syscon-reset", }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, ti_syscon_reset_of_match); + +static struct platform_driver ti_syscon_reset_driver = { + .probe = ti_syscon_reset_probe, + .driver = { + .name = "ti-syscon-reset", + .of_match_table = ti_syscon_reset_of_match, + }, +}; +module_platform_driver(ti_syscon_reset_driver); + +MODULE_AUTHOR("Andrew F. Davis <afd@ti.com>"); +MODULE_AUTHOR("Suman Anna <s-anna@ti.com>"); +MODULE_DESCRIPTION("TI SYSCON Regmap Reset Driver"); +MODULE_LICENSE("GPL v2"); |